W1724CDDAD [AGERE]
Optical Amplifier Platform,1724-Type Eribium-Doped Fiber Amplifier(W Series); 光放大器平台, 1724型Eribium -铒光纤放大器( W系列)型号: | W1724CDDAD |
厂家: | AGERE SYSTEMS |
描述: | Optical Amplifier Platform,1724-Type Eribium-Doped Fiber Amplifier(W Series) |
文件: | 总10页 (文件大小:151K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Data Sheet, Rev. 1
September 2001
Optical Amplifier Platform, 1724-Type
Erbium-Doped Fiber Amplifier (W Series)
Applications
■ Designed specifically for DWDM applications
■ Booster/power amplifier
■ Line amplifier
Description
The W1724-Type Erbium-Doped Fiber Amplifier
(EDFA) has been designed for use in DWDM applica-
tions and offers the following performance features:
■ Flat gain profile over a wide temperature range
■ Low noise figure
■ High output power
Designed for use in DWDM applications, the standard
W1724-Type EDFA incorporates a DB-25 connector and a
microcontroller with TTL compatible alarm monitoring.
■ Automatic gain lock
The versatile W1724-Type EDFA operates over a
wide temperature range, exhibits extremely low
power dissipation, and offers a variety of alarms and
monitors. Optimum performance and system stability
are supported through the use of optical isolation at
the input and output. Optical input and output are
through single-mode fiber pigtails terminated with
optical connectors.
Features
■ Gain-flattened spectral response
■ High saturation output power, > 22 dBm
■ Low power consumption, < 12 W @ 45 °C
■ Low noise
The EDFA incorporates optical input and output taps
that are monitored via an integral microcontroller.
Significant performance benefits are achieved with
the microcontroller, which stabilizes the temperature
of the pumps and maintains constant gain of the
amplifier.
■ Single 5 V operation
■ Wide input signal bandwidth
■ Wide operating temperature range, 0 °C to 65 °C
■ Optical input and output taps
Contact your Account Manager at Agere Systems
Inc. to discuss electrical or optical connector options
not listed in the Ordering Information section.
■ Isolated input and output
■ Programmable input and output monitors
■ Connectorized single-mode fiber pigtail
■ Standard serial communication channels
Data Sheet, Rev. 1
September 2001
Optical Amplifier Platform, 1724-Type
Erbium-Doped Fiber Amplifier (W Series)
Standard Features
TTL-Compatible Alarm Outputs
The standard W1724-Type EDFA incorporates the opti-
cal architecture illustrated in Figure 1. The standard
features include:
Loss of Input Power Alarm
If the input power is more than 2 dBm below the mini-
mum PIN, the loss of input power alarm (pin 19) will
activate (TTL-logic 1).
■ Exceptional performance benefits with the integral
microcontroller, which precisely controls the gain to
maintain a flat spectral response over various input
powers.
Loss of Output Power Alarm
■ Single 5 V power supply eliminates the need for dual
voltage source circuits.
If the output power decreases by more than 2 dB from
its beginning-of-life value, the loss of output power
alarm (pin 8) will activate (TTL-logic 1).
■ DB-25 electrical connector allows for easy electrical
connectivity.
■ Optical input tap enables input monitoring and con-
trol.
Pumps Temperature Alarm
If the laser temperature for the pump(s) exceeds 35 °C,
the pump temperature alarm (pin 10) will activate (TTL-
logic 1).
■ SC/PC optical connector.
■ Low power dissipation.
■ Alarms:
— Loss of input power alarm.
Pumps Bias Alarm
— Loss of output power alarm.
— Pump bias alarm (>95% of EOL value).
— Pump temperature alarm (TL > 35 °C).
— EDFA temperature alarm (TC > 60 °C).
If the bias current for the pump(s) exceeds 95% of its
EOL value, the pump bias alarm (pin 9) will activate
(TTL-logic 1).
■ Advanced microprocessor design requires minimal
engineering for a shelf-level product.
EDFA Temperature Alarm
■ Standard mechanical outline includes metric screws
and fiber outputs (using SC/PC optical connectors)
at 180 degrees relative to a DB25 electrical connec-
tor. The standard product does not include a heat
sink.
If the case temperature exceeds 60 °C, then the
EDFA temperature alarm (pin 7) will activate (TTL-
logic 1).
Optional Features
Other feature and package options for the W1724-Type
EDFA include:
■ Alternative optical connectors
■ Integral heat sink
2
2
Agere Systems Inc.
Optical Amplifier Platform, 1724-Type
Erbium-Doped Fiber Amplifier (W Series)
Data Sheet, Rev. 1
September 2001
Block Diagram
OPTICAL
OUTPUT
SIGNAL
OPTICAL
OPTICAL GAIN
INPUT
INPUT TAP
OUTPUT TAP
SIGNAL
PD #1
INPUT POWER
MONITOR
PD #2
OUTPUT POWER
MONITOR
MICROCONTROLLER
1-904 (C)
Figure 1. W1724-Type EDFA Block Diagram
Pin Information
Table 1. Pin Descriptions for a Microcontrolled (Full) Amplifier
Pin
Description
5.0 V (±0.25 V)
Pin
Description
1
2
14
15
16
17
18
19
20
21
22
23
24
25
—
GND
GND
GND
GND
5.0 V (±0.25 V)
3
5.0 V (±0.25 V)
4
5.0 V (±0.25 V)
Reserved1
Reserved1
5
RS-232 OUT (TTL)
Loss of Input Power Alarm6
Reserved1
Amplifier Disable Input7
RS-232 IN (TTL)
Reserved1
6
7
EDFA Temperature Alarm
Loss of Output Power Alarm2
Pumps Bias Alarm3
Pumps Temperature Alarm4
EDFA Shutdown Override5
5.0 V (±0.25 V)
8
9
10
11
12
13
5.0 V (±0.25 V)
GND
GND
—
1. Do not connect to reserved pins.
2. Normal = TTL low, alarm = TTL high if the output power falls 2 dB below the minimum value.
3. Normal = TTL low, alarm = TTL high if pump bias exceeds 95% of its end-of-life value.
4. Normal = TTL low, alarm = TTL high if pump temperature exceeds 35 °C.
5. The EDFA is equipped with an optical transient suppression feature when this pin is tied to GND. The EDFA will turn all pumps off, if the
input power is too low. Tying this pin to 5 V will disable this feature; however, damage to the optical connectors and components may occur if
the amplifier is turned on without the presence of an optical signal.
6. Normal = TTL low, alarm = TTL high if input power is less than 2 dB below minimum PIN.
7. Amplifier enable (all pumps are on) = TTL low, amplifier disable (all pumps are off) = TTL high.
3
Agere Systems Inc.
Data Sheet, Rev. 1
September 2001
Optical Amplifier Platform, 1724-Type
Erbium-Doped Fiber Amplifier (W Series)
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-
lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.
Parameter
Symbol
Min
Typ
Max
Unit
Storage Temperature
Operating Case Temperature
Absolute Humidity
Tstg
TC
—
–40
0
20
35
—
70
65
°C
°C
—
0.024
lbs. H2O/lbs. dry air
Electrical Characteristics
Table 2. Power Supply
Parameter
Symbol
Min
Typ*
Max
Unit
dc Power Supply Voltage
VPS1
IPS1
4.75
—
5.0
1.0
5.25
—
V
A
Power Supply Current
(beginning of life)
Power Supply Current
(end of life)
IPS1
—
—
—
—
—
5.0
—
1.9
—
A
Electrical Power Consumption
(beginning of life)
W
W
Electrical Power Consumption
(end of life)
—
10.0
* Typical operating characteristics: VPS1 = 5.0 V, TC = 35 °C.
Table 3. TTL Inputs/Outputs
Under normal operating conditions, the various alarm outputs will be TTL level low. If the corresponding parameter
is outside a predesignated range, the associated alarms will become TTL level high.
Parameter
Input Voltage:
Symbol
Min
Typ
Max
Unit
High
Low
VIH
VIL
2
—
—
—
—
0.8
V
V
Output Voltage:
High
VOH
VOL
2.4
0
—
0.1
—
0.4
V
V
Low
Input Current:
High
IIH
IIL
—
—
—
—
–1
1
µA
µA
Low
Output Current:
High
Low
IOH
IOL
—
—
—
—
–4
20
mA
µA
4
Agere Systems Inc.
Optical Amplifier Platform, 1724-Type
Erbium-Doped Fiber Amplifier (W Series)
Data Sheet, Rev. 1
September 2001
Optical Characteristics
Table 4. Performance Specifications for W Series
Parameter
Symbol
Min
Typ
Max
Unit
Signal Wavelength Range:
W1724CDDAD
λL
1530
1549.32
1549.32
—
—
—
1560
1560.61
1560.61
nm
nm
nm
W1724CBBAD
W1724CBBAH
Gain Flatness:
W1724CDDAD
W1724CBBAD
W1724CBBAH
GF
PIL
—
—
—
1.3
—
—
2.0
1.5
1.5
dB
dB
dB
Intput Power:
W1724CDDAD
W1724CBBAD
W1724CBBAH
–17
–20
–28
—
—
—
–8
–8
–16
dBm
dBm
dBm
Output Power:
W1724CDDAD
W1724CBBAD
W1724CBBAH
POUT
NF
8
4.5
4.5
—
—
—
17
17.8
17.8
dBm
dBm
dBm
Noise Figure:
W1724CDDAD
W1724CBBAD
W1724CBBAH
—
—
—
5.0
—
—
6.0
5.5
5.5
dB
dB
dB
Optical Isolation
—
RL
25
—
—
—
—
—
—
—
—
—
—
dB
dB
Return Loss
–40
–20
1.0
0.5
Reverse ASE Power Level
Polarization-mode Dispersion
Polarization-dependent Gain
PASE,R
PMD
PDG
dBm
ps
dB
5
Agere Systems Inc.
Data Sheet, Rev. 1
September 2001
Optical Amplifier Platform, 1724-Type
Erbium-Doped Fiber Amplifier (W Series)
Outline Drawings
W1724-Type EDFA Package
Dimensions are in inches and (millimeters).
MOUNTING HOLES
M3 x 0.5, 5 mm DEEP
4 PLACES
5.074
(128.88)
0.41
(10.4)
4.660
(118.36)
LABELS AS
REQUIRED
DANGER
LABEL
0.12
(3.0)
HEATSINK MOUNTING HOLES
M3 x 0.5, 4.5 mm DEEP
5 PLACES
5.90
(149.9)
4.90
(124.5)
DB 25
CONNECTOR
MALE
3.10
(78.7)
4.57
(116.08)
PIN 1
2.285
(58.04)
ESD
LABEL
0.90
(22.9)
0.165
(4.19)
3.795
(96.39)
0.44
(11.2)
0.76
(19.3)
5.570
(141.48)
0.17
(4.2)
0.83
(21.1)
INFORMATION LABEL
0.03
(0.8)
1-997(F)
6
Agere Systems Inc.
Optical Amplifier Platform, 1724-Type
Erbium-Doped Fiber Amplifier (W Series)
Data Sheet, Rev. 1
September 2001
Outline Drawings (continued)
Optional Package Configuration: W1724-Type EDFA Package with Integral Heat Sink
Dimensions are in inches and (millimeters).
CUSTOMER
LABEL
LASER WARNING
LABEL
DANGER
1.500
(38.10)
0.033
(0.84)
5.90
(149.9)
5.074
(128.88)
0.44
(11.2)
0.41
(10.5)
DB 25
CONNECTOR
(MALE)
4.660
(118.36)
4.91 1.850
(124.7) (46.99)
AGERE SYSTEMS
Breinigsville, Pennsylvania
USA
DATE MANUFACTURED:
NOVEMBER 1997
PIN 1
1.53
(38.9)
0.76
(19.3)
0.123
(3.12)
0.38
(9.5)
0.98
(24.8)
3.94
(100.1)
MOUNTING HOLES
M3 x 0.5, 5 mm DEEP
AS NOTED BY DIMPLE
4 PLACES
1-998(C)
7
Agere Systems Inc.
Data Sheet, Rev. 1
September 2001
Optical Amplifier Platform, 1724-Type
Erbium-Doped Fiber Amplifier (W Series)
Ordering Information
Table 5. Ordering Information*
Device Code
Po
Connector
Heat Sink
Comcode
W1724CDDAD
W1724CBBAD
W1724CBBAH
17.0 dBm
17.0 dBm
17.0 dBm
FC/PC
SC/PC
SC/PC
Yes
No
No
108358433
108338674
108396102
* Contact your Account Manager to discuss your requirements. (If you do not know your Account Manager, please call the Optoelectronics unit
at Agere Systems directly at (610) 391-2520.)
Related Product Information
Table 6. Related Product Information
Description
High-Speed Lightwave Receiver
Part Number
Document Number
1319-Type
—
DS97-106LWP
DS98-110LWP
DS98-368LWP
DS98-339LWP
DS97-122LWP
DS99-199LWP
DS98-206LWP
AP99-020LWP
Lithium Niobate Modulator
Electroabsorption Modulated Isolated Laser Module
1.5 µm Isolated DFB Laser Module
1.3 µm Isolated DFB Laser Module
0.98 µm Pump Laser Module
E2500-Type
D2500-Type
D2300-Type
263-Type
131-Type
1724-Type
Long-Wavelength PIN Photodetectors
Interfacing the 1724-Type Microprocessor-Controlled
Erbium-Doped Fiber Amplifier via a Serial Communication Port
1725-Type Gain Block Erbium-Doped Fiber Amplifier
1725
DS00-271LWP
DS99-353LWP
Optical Amplifier Platform, 1730-Type Erbium-Doped Fiber
Amplifier
S1730-Type
Extended Band (L-Band) 1735-Type Gain Block Erbium-Doped
Fiber Amplifier
1735-Type
DS00-113OPTO
8
Agere Systems Inc.
Optical Amplifier Platform, 1724-Type
Erbium-Doped Fiber Amplifier (W Series)
Data Sheet, Rev. 1
September 2001
Laser Safety Information
FDA/CDRH Class IIIb and IEC ® 60825 Class 3B laser product.
All versions of the product are FDA/CDRH Class IIIb laser products. The product complies with the U.S. Code of
Federal Regulations (CFR), Title 21, Part 1040.10 and 1040.11 laser product regulations.The product is registered/
certified with the FDA under accession number 9320325.
All versions are Class 3B laser products per IEC 60825-1:1993.
Optical Specifications
Optical fiber: single-mode, 8.8 µm/125 µm (mode field/cladding diameter) pigtail with connector.
Nominal wavelength: 1550 nm.
Absolute maximum output power: <500 mW.
Product is not shipped with power supply.
CAUTION: Use of controls, adjustments, and procedures other than those specified herein may result in
hazardous laser radiation exposure.
DANGER
INVISIBLE LASER RADIATION
DANGER
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
INVISIBLE LASER RADIATION
Avoid direct exposure to beam
AVOID DIRECT EXPOSURE TO BEAM
Do not view beam directly with
optical instruments
Max. Output: 500 mW,
µ
m
Wavelength: 1.5
Class IIIb Laser Product
LASER APERTURE
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
Avoid exposure to beam
Class 3B Laser Product IEC-60825 1993 Max. Output: 500 mW
Wavelength: 1.55 m
µ
9
Agere Systems Inc.
IEC is a registered trademark of the International Electrotechnical Commission.
For additional information, contact your Agere Systems Account Manager or the following:
INTERNET:
E-MAIL:
http://www.agere.com
docmaster@agere.com
N. AMERICA: Agere Systems Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, PA 18109-3286
1-800-372-2447, FAX 610-712-4106 (In CANADA: 1-800-553-2448, FAX 610-712-4106)
ASIA:
Agere Systems Hong Kong Ltd., Suites 3201 & 3210-12, 32/F, Tower 2, The Gateway, Harbour City, Kowloon
Tel. (852) 3129-2000, FAX (852) 3129-2020
CHINA: (86) 21-5047-1212 (Shanghai), (86) 10-6522-5566 (Beijing), (86) 755-695-7224 (Shenzhen)
JAPAN: (81) 3-5421-1600 (Tokyo), KOREA: (82) 2-767-1850 (Seoul), SINGAPORE: (65) 778-8833, TAIWAN: (886) 2-2725-5858 (Taipei)
Tel. (44) 7000 624624, FAX (44) 1344 488 045
EUROPE:
Agere Systems Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application.
Copyright © 2001 Agere Systems Inc.
All Rights Reserved
September 2001
DS00-123OPTO-1 (Replaces DS00-123OPTO)
相关型号:
W172DIP-141
Electromechanical Relay, SPDT, 5.5VDC (Coil), 290mW (Coil), 0.25A (Contact), 100VDC (Contact), Random, AC/DC Output
SCHNEIDER
W172DIP-146
Electromechanical Relay, SPDT, 26.4VDC (Coil), 290mW (Coil), 0.25A (Contact), 100VDC (Contact), Random, AC/DC Output
SCHNEIDER
©2020 ICPDF网 联系我们和版权申明