HFBR2521 [AGILENT]
Versatile Link The Versatile Fiber Optic Connection; 多功能连接的通用光纤连接型号: | HFBR2521 |
厂家: | AGILENT TECHNOLOGIES, LTD. |
描述: | Versatile Link The Versatile Fiber Optic Connection |
文件: | 总20页 (文件大小:410K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Versatile Link
The Versatile Fiber Optic
Connection
Technical Data
HFBR-0501 Series
Features
• Low Cost Fiber Optic
Components
• Enhanced Digital Links
dc-5 MBd
• Isolation in Test and
Measurement Instruments
• Error Free Signalling for
Industrial and Manufactur-
ing Equipment
• Automotive Communications
and Control Networks
• Extended Distance Links up
to 120 m at 40 kBd
• Noise Immune Communica-
tion in Audio and Video
Equipment
• Low Current Link: 6 mA
Peak Supply Current
• Horizontal and Vertical
Mounting
• Interlocking Feature
• High Noise Immunity
• Easy Connectoring
Simplex, Duplex, and
Latching Connectors
Description
transmitter and receiver compo-
nents have been designed for use
in high volume/low cost assembly
processes such as auto insertion
and wave soldering.
The Versatile Link series is a
complete family of fiber optic link
components for applications
requiring a low cost solution. The
HFBR-0501 series includes trans-
mitters, receivers, connectors and
cable specified for easy design.
This series of components is ideal
for solving problems with voltage
isolation/insulation, EMI/RFI
immunity or data security. The
optical link design is simplified
by the logic compatible receivers
and complete specifications for
each component. The key optical
and electrical parameters of links
configured with the HFBR-0501
family are fully guaranteed from
0° to 70°C.
• Flame Retardant
Transmitters incorporate a 660
nm LED. Receivers include a
monolithic dc coupled, digital IC
receiver with open collector
Schottky output transistor. An
internal pullup resistor is avail-
able for use in the HFBR-25X1/2/
4 receivers. A shield has been
integrated into the receiver IC to
provide additional, localized noise
immunity.
• Transmitters Incorporate a
660 nm Red LED for Easy
Visibility
• Compatible with Standard
TTL Circuitry
Applications
• Reduction of Lightning/Volt-
age Transient Susceptibility
• Motor Controller Triggering
• Data Communications and
Local Area Networks
Internal optics have been optim-
ized for use with 1 mm diameter
plastic optical fiber. Versatile
Link specifications incorporate
all connector interface losses.
Therefore, optical calculations for
common link applications are
simplified.
• Electromagnetic
Compatibility (EMC) for
Regulated Systems: FCC,
VDE, CSA, etc.
• Tempest-Secure Data
Processing Equipment
A wide variety of package config-
urations and connectors provide
the designer with numerous
mechanical solutions to meet
application requirements. The
2
HFBR-0501 Series Part Number Guide
HFBR X5XX
1 = Transmitter
2 = Receiver
5 = 600 nm Transmitter and
Receiver Products
1 = 5 MBd High Performance Link
2 = 1 MBd High Performance Link
3 = 40 kBd Low Current/Extended Distance Link
4 = 1 MBd Standard Link
2 = Horizontal Package
3 = Vertical Package
6 = 155 MBd Receiver
7 = 155 MBd Transmitter
8 = 10 MBd High Performance Link
Link Selection Guide
(Links specified from 0 to 70°C, for plastic optical fiber unless specified.)
Signal Rate
40 kBd
1 MBd
Distance (m) 25°C
Distance (m)
Transmitter
HFBR-1523
HFBR-1524
HFBR-1522
HFBR-1521
Receiver
HFBR-2523
HFBR-2524
HFBR-2522
HFBR-2521
120
20
55
110
10
45
1 MBd
5 Mbd
30
20
Evaluation Kit
HFBR-0501 1 MBd Versatile Link:
This kit contains: HFBR-1524 Tx, HFBR-2524 Rx, polishing kit, 3 styles of plastic connectors, Bulkhead
feedthrough, 5 meters of 1 mm diameter plastic cable, lapping film and grit paper, and HFBR-0501 data
sheet.
Application Literature
Application Note 1035 (Versatile Link)
Package and Handling
provide a dust resistant seal.
Snap action simplex, simplex
latching, duplex, and duplex
latching connectors are offered
with simplex or duplex cables.
the designer has the option of
using a self-tapping screw
through a printed circuit board
into a mounting hole at the
bottom of the package. For most
applications this is not necessary.
Information
The compact Versatile Link pack-
age is made of a flame retardant
®
VALOX UL 94 V-0 material
(UL file # E121562) and uses the
same pad layout as a standard,
eight pin dual-in-line package.
Vertical and horizontal mountable
parts are available. These low
profile Versatile Link packages
are stackable and are enclosed to
Package Orientation
Package Housing Color
Performance and pinouts for the
vertical and horizontal packages
are identical. To provide addi-
tional attachment support for the
vertical Versatile Link housing,
Versatile Link components and
simplex connectors are color
coded to eliminate confusion
®
VALOX is a registered trademark of the General Electric Corporation.
3
when making connections.
Receivers are blue and transmit-
ters are gray, except for the
HFBR-15X3 transmitter, which is
black.
Versatile Link components are
moisture sensitive devices and
are shipped in a moisture sealed
bag. If the components are
exposed to air for an extended
period of time, they may require
a baking step before the solder-
ing process. Refer to the special
labeling on the shipping tube for
details.
Recommended Chemicals for
Cleaning/Degreasing
Alcohols: methyl, isopropyl,
isobutyl. Aliphatics: hexane,
heptane, Other: soap solution,
naphtha.
Handling
Versatile Link components are
auto-insertable. When wave
soldering is performed with
Versatile Link components, the
optical port plug should be left in
to prevent contamination of the
port. Do not use reflow solder
processes (i.e., infrared reflow or
vapor-phase reflow).
Nonhalogenated water soluble
fluxes (i.e., 0% chloride), not
rosin based fluxes, are recom-
mended for use with Versatile
Link components.
Do not use partially halogenated
hydrocarbons such as 1,1.1
trichloroethane, ketones such as
MEK, acetone, chloroform, ethyl
acetate, methylene dichloride,
phenol, methylene chloride, or N-
methylpyrolldone. Also, Agilent
does not recommend the use of
cleaners that use halogenated
hydrocarbons because of their
potential environmental harm.
Level
CAUTION
This bag contains
4
MOISTURE-SENSITIVE
DEVICES
1. Shelf life in sealed bag: 12 months at < 40°C and < 90% Relative
Humidity (RH).
2. After this bag is opened, devices that will be subjected to wave
soldering, or equivalent processing (solder temperature < 260°C for
10 sec) must be:
a) Mounted within 72 hours at factory conditions of ≤ 30°C/60% RH.
b) Stored at ≤ 20% RH.
3. Devices require baking, before mounting, if:
a) Desiccant changes to PINK.
b) If 2a or 2b are not met.
4. If baking is required, devices may be baked outside of tube for 20
hours at 75°C.
Bag Seal Date: ______________________________________________________
(If blank, see barcode label)
Note: LEVEL defined by EIA JEDEC Standard J-STD-020
Mechanical Dimensions
Horizontal Modules
Vertical Modules
2.0
(0.080)
6.8
(0.270)
10.2
(0.400)
5.1
7.6
(0.30)
18.8
(0.740)
(0.200)
4.2
(0.165)
0.64
(0.025)
18.8
0.740
(0.30)
7.6
3.81 (0.150) MAX.
3.56 (0.140) MIN.
7.62
(0.300)
1.27
(0.050)
0.51
(0.020)
2.5
(0.100)
0.64 (0.025) DIA.
1.85
(0.073)
2.8
(0.109)
4
Versatile Link Printed Board Layout Dimensions
Horizontal Module
Vertical Module
7.62
(0.300)
2.54
(0.100)
1.01 (0.040) DIA.
4
5
3
2
1
6
TOP VIEW
7.62
(0.300)
PCB EDGE
1.85
(0.073)
MIN.
DIMENSIONS IN MILLIMETERS (INCHES).
edge, such as a ruler, to bring all
To stack vertical packages, hold
one unit in each hand, with the
pins facing away and the optical
ports on the bottom. Slide the L
bracket unit into the L slot unit.
The straight edge used for
horizontal package alignment is
not needed.
Interlocked (Stacked)
Assemblies (refer to
Figure 1)
Horizontal packages may be
stacked by placing units with pins
facing upward. Initially engage
the interlocking mechanism by
sliding the L bracket body from
above into the L slot body of the
lower package. Use a straight
stacked units into uniform
alignment. This technique
prevents potential harm that
could occur to fingers and hands
of assemblers from the package
pins. Stacked horizontal packages
can be disengaged if necessary.
Repeated stacking and unstack-
ing causes no damage to
individual units.
Stacking Horizontal Modules
Stacking Vertical Modules
Figure 1. Interlocked (Stacked) Horizontal or Vertical Packages.
5
5 MBd Link (HFBR-15X1/25X1)
System Performance 0 to 70°C unless otherwise specified.
Parameter
Data Rate
Link Distance
(Standard Cable)
Link Distance
Symbol Min. Typ. Max. Units
Conditions
Ref.
Fig. 3
Note 3
Fig. 4
High
Performance
5 MBd
dc
5
MBd BER ≤ 10-9, PRBS:27-1
19
27
22
27
m
m
m
m
IFdc = 60 mA
IFdc = 60 mA, 25°C
IFdc = 60 mA
IFdc = 60 mA, 25°C
48
53
(Improved Cable)
Note 3
Propagation
Delay
tPLH
tPHL
80 140
50 140
ns
ns
RL = 560 Ω, CL =30 pF Fig. 5, 8
fiber length = 0.5 m
Notes 1, 2
-21.6 ≤ PR ≤ -9.5 dBm
Pulse Width
tD
30
ns
PR = -15 dBm
Fig. 5, 7
Distortion tPLH-tPHL
RL = 560 Ω, CL = 30 pF
Notes:
1. The propagation delay for one metre of cable is typically 5 ns.
2. Typical propagation delay is measured at PR = -15 dBm.
3. Estimated typical link life expectancy at 40°C exceeds 10 years at 60 mA.
Figure 2. Typical 5 MBd Interface Circuit.
100
100
50
40
50
40
OVERDRIVE
OVERDRIVE
30
30
UNDERDRIVE
UNDERDRIVE
20
20
10
5
10
5
0°C–70°C
25°C
0°C–70°C
25°C
0
10
20
30
40
50
0
10
20
30
40
50
60
– CABLE LENGTH – METRES
– CABLE LENGTH – METRES
Figure 3. Guaranteed System Performance with Standard
Cable (HFBR-15X1/25X1).
Figure 4. Guaranteed System Performance with Improved
Cable (HFBR-15X1/25X1).
6
Figure 5. 5 MBd Propagation Delay Test Circuit.
Figure 6. Propagation Delay Test Waveforms.
500
400
300
200
500
70°C
HFBR-15X2/25X2
HFBR-15X4/25X4
400
t
25°C
pLH
HFBR-15X2/25X2
HFBR-15X4/25X4
0°C
300
200
100
HFBR-15X1/25X1
t
t
pLH
100
0
70°C
25°C
0°C
HFBR-15X1/25X1
pHL
0
-25
-20
-15
-10
-5
0
-25
-20
P – INPUT OPTICAL POWER – dBm
R
-15
-10
-5
0
P
– INPUT OPTICAL POWER – dBm
R
Figure 7. Typical Link Pulse Width Distortion vs.
Optical Power.
Figure 8. Typical Link Propagation Delay vs. Optical Power.
7
HFBR-15X1 Transmitter
Pin #
Function
Anode
Cathode
Open
Open
8 DO NOT CONNECT
1
2
3
4
1
2
3
4
5
8
ANODE
CATHODE
N.C.
N.C.
5 DO NOT CONNECT
Do not connect
Do not connect
Note: Pins 5 and 8 are for mounting and
retaining purposes only. Do not
electrically connect these pins.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Lead Soldering Cycle
Forward Input Current
Reverse Input Voltage
Symbol
Min.
–40
–40
Max.
+85
+85
260
10
1000
80
5
Units
°C
°C
°C
sec
mA
Reference
T
S
T
A
Temp.
Time
Note 1
I
Note 2, 3
FPK
I
Fdc
V
BR
V
Notes:
1. 1.6 mm below seating plane.
2. Recommended operating range between 10 and 750 mA.
3. 1 µs pulse, 20 µs period.
All HFBR-15XX LED transmitters are classified as IEC 825-1 Accessible
Emission Limit (AEL) Class 1 based upon the current proposed draft scheduled
to go into effect on January 1, 1997. AEL Class 1 LED devices are considered
eye safe. Contact your local Agilent sales representative for more information.
8
Transmitter Electrical/Optical Characteristics 0°C to 70°C unless otherwise specified.
Parameter
Symbol
Min. Typ.[5] Max. Units
Conditions
Ref.
Transmitter Output
Optical Power
PT
-16.5
-14.3
-7.6
-8.0
dBm IFdc = 60 mA
dBm IFdc = 60 mA, 25°C
%/°C
Notes 1, 2
Output Optical Power
Temperature Coefficient
Peak Emission
Wavelength
∆PT/∆T
-0.85
660
λPK
nm
Forward Voltage
Forward Voltage
Temperature Coefficient
Effective Diameter
Numerical Aperture
VF
∆VF/∆T
1.45
5.0
1.67
-1.37
2.02
V
IFdc = 60 mA
mV/°C
Fig. 9
D
NA
VBR
1
0.5
11.0
mm
V
Reverse Input Breakdown
Voltage
IFdc = 10 µA,
TA = 25°C
Diode Capacitance
Rise Time
Fall Time
CO
tr
tf
86
80
40
pF
ns
ns
VF = 0, f = MHz
10% to 90%,
I = 60 mA
F
Note 3
Notes:
1. Measured at the end of 0.5 m standard fiber optic cable with large area detector.
2. Optical power, P (dBm) = 10 Log [P(µW)/1000 µW].
3. Rise and fall times are measured with a voltage pulse driving the transmitter and a series connected 50 Ω load. A wide bandwidth
optical to electrical waveform analyzer, terminated to a 50 Ω input of a wide bandwidth oscilloscope, is used for this response time
measurement.
1.8
1.7
1.6
1.5
1.4
5
0
-5
0°C
25°C
-10
70°C
-15
-20
2
10
100
2
10
100
I
– TRANSMITTER DRIVE CURRENT (mA)
I
Fdc
– TRANSMITTER DRIVE CURRENT (mA)
Fdc
Figure 9. Typical Forward Voltage vs. Drive Current.
Figure 10. Normalized Typical Output Power vs. Drive
Current.
9
HFBR-25X1 Receiver
Pin #
Function
1
2
3
4
5
8
V
O
Ground
DO NOT CONNECT
5
1000 Ω
R
L
4
3
V
CC
V
CC
R
L
GROUND
2
1
Do not connect
Do not connect
V
O
DO NOT CONNECT
8
Note: Pins 5 and 8 are for mounting and
retaining purposes only. Do not
electrically connect these pins.
Absolute Maximum Ratings
Parameter
Symbol
Min.
–40
–40
Max.
+85
+85
260
10
Units
°C
°C
°C
sec
V
Reference
Storage Temperature
Operating Temperature
T
S
T
A
Lead Soldering Cycle
Temp.
Time
Note 1
Note 2
Supply Voltage
V
CC
–0.5
7
Output Collector Current
Output Collector Power Dissipation
Output Voltage
I
P
25
40
18
mA
mW
V
OAV
OD
V
V
–0.5
–5
O
P
Pull-up Voltage
V
CC
V
Fan Out (TTL)
N
5
Notes:
1. 1.6 mm below seating plane.
2. It is essential that a bypass capacitor 0.01 µF be connected from pin 2 to pin 3 of the receiver. Total lead length between both ends
of the capacitor and the pins should not exceed 20 mm.
Receiver Electrical/Optical Characteristics
0°C to 70°C, 4.75 V ≤ VCC ≤ 5.25 V unless otherwise specified
Parameter
Input Optical Power
Level for Logic “0”
Symbol
PR(L)
Min.
–21.6
Typ.
Max. Units
Conditions
VOL = 0.5 V
IOL = 8 mA
VOL = 0.5 V
IOL = 8 mA, 25°C
Ref.
Notes 1,
2, 4
–9.5
–8.7
–43
dBm
–21.6
Input Optical Power
Level for Logic “1”
PR(H)
dBm
VOL = 5.25 V
IOH ≤ 250 µA
Note 1
High Level Output Current
Low Level Output Current
IOH
VOL
5
0.4
250
0.5
µA
V
VO = 18 V, PR = 0
IOL = 8 mA,
PR = PR(L)MIN
Note 3
Note 3
High Level Supply
Current
Low Level Supply Current
ICCH
ICCL
3.5
6.2
6.3
10
mA
mA
mm
VCC = 5.25 V,
PR = 0
VCC = 5.25 V
Note 3
Note 3
PR = -12.5 dBm
Effective Diameter
D
1
Numerical Aperture
Internal Pull-up Resistor
NA
RL
0.5
1000
680
1700
Ω
Notes:
1. Optical flux, P (dBm) = 10 Log [P (µW)/1000 µW].
2. Measured at the end of the fiber optic cable with large area detector.
3. R is open.
L
4. Pulsed LED operation at I > 80 mA will cause increased link t
propagation delay time. This extended t
time contributes to
PLH
F
PLH
increased pulse width distortion of the receiver output signal.
10
1 MBd Link
(High Performance HFBR-15X2/25X2, Standard HFBR-15X4/25X4)
System Performance Under recommended operating conditions unless otherwise specified.
Parameter Symbol Min. Typ. Max. Units Conditions
Data Rate
MBd BER ≤ 10-9, PRBS:27-1
Ref.
High
dc
1
Performance
1 MBd
Link Distance
(Standard Cable)
39
47
m
m
IFdc = 60 mA
IFdc = 60 mA, 25°C
Fig. 14
Notes 1,
3, 4
Fig. 15
Notes 1,
3, 4
70
78
Link Distance
(Improved Cable)
45
56
m
m
IFdc = 60 mA
IFdc = 60 mA, 25°C
Propagation
Delay
tPLH
tPHL
180 250
100 140
ns
ns
RL = 560 Ω, CL = 30 pF Fig. 16, 18
I = 0.5 metre
PR = -24 dBm
Notes 2, 4
Pulse Width
Distortion tPLH-tPHL
tD
80
ns
PR = -24 dBm
RL = 560 Ω, CL = 30 pF
Fig. 16, 17
Note 4
Parameter
Data Rate
Symbol Min. Typ. Max. Units
Conditions
Ref.
Standard
1 MBd
dc
1
MBd BER ≤ 10-9, PRBS:27-1
Link Distance
(Standard Cable)
8
17
m
m
IFdc = 60 mA
IFdc = 60 mA, 25°C
Fig. 12
Notes 1,
3, 4
Fig. 13
Notes 1,
3, 4
43
48
Link Distance
(Improved Cable)
10
19
m
m
IFdc = 60 mA
IFdc = 60 mA, 25°C
Propagation
Delay
tPLH
tPHL
180 250
100 140
ns
ns
RL = 560 Ω, CL = 30 pF Fig. 16, 18
I = 0.5 metre
PR = -20 dBm
Notes 2, 4
Pulse Width
Distortion tPLH-tPHL
tD
80
ns
PR = -20 dBm
RL = 560 Ω, CL = 30 pF
Fig. 16, 17
Note 4
Notes:
1. For I
> 80 mA, the duty factor must be such as to keep I
≤ 80 mA. In addition, for I
> 80 mA, the following rules for
FPK
FPK
Fdc
pulse width apply:
I
≤ 160 mA: Pulse width ≤ 1 ms
FPK
I
> 160 mA: Pulse width ≤ 1 µS, period ≥ 20 µS.
FPK
2. The propagation delay for one meter of cable is typically 5 ns.
3. Estimated typical link life expectancy at 40°C exceeds 10 years at 60 mA.
4. Pulsed LED operation at I > 80 mA will cause increased link t propagation delay time. This extended t time contributes
PLH
FPK
PLH
to increased pulse width distortion of the receiver output signal.
11
Figure 11. Required 1 MBd Interface Circuit.
The HFBR-25X2 receiver can not be overdriven when using the
required interface circuit shown in Figure 11.
100
90
100
90
80
70
80
70
60
50
60
50
40
40
30
HFBR-15X4/25X4
HFBR-15X4/25X4
30
0°C–70°C
25°C
0°C–70°C
25°C
20
20
0
5
10
15
20
25
0
10
20
30
– CABLE LENGTH – METRES
– CABLE LENGTH – METRES
Figure 12. Guaranteed System Performance for the
HFBR-15X4/25X4 Link with Standard Cable.
Figure 13. Guaranteed System Performance for the
HFBR-15X4/25X4 Link with Improved Cable.
100
100
50
40
50
40
30
30
20
20
UNDERDRIVE
UNDERDRIVE
10
10
0°C–70°C
0°C–70°C
25°C
25°C
5
5
0
10
20
30
40
50
0
10
20
30
40
50
60
– CABLE LENGTH – METRES
– CABLE LENGTH – METRES
Figure 14. Guaranteed System Performance for the
HFBR-15X2/25X2 Link with Standard Cable.
Figure 15. Guaranteed System Performance for the
HFBR-15X2/25X2 Link with Improved Cable.
12
Figure 16. 1 MBd Propagation Delay Test Circuit.
500
400
300
200
500
400
300
200
70°C
HFBR-15X2/25X2
HFBR-15X4/25X4
t
25°C
pLH
HFBR-15X2/25X2
HFBR-15X4/25X4
0°C
HFBR-15X1/25X1
t
t
pLH
100
0
100
0
70°C
25°C
0°C
HFBR-15X1/25X1
pHL
-25
-20
-15
-10
-5
0
-25
-20
P – INPUT OPTICAL POWER – dBm
R
-15
-10
-5
0
P
– INPUT OPTICAL POWER – dBm
R
Figure 17. Pulse Width Distortion vs.
Optical Power.
Figure 18. Typical Link Propagation
Delay vs. Optical Power.
Figure 19. Propagation Delay Test
Waveforms.
13
HFBR-15X2/15X4 Transmitters
Pin #
Function
Anode
Cathode
Open
Open
1
2
3
4
5
8
8 DO NOT CONNECT
1
ANODE
2
CATHODE
3
N.C.
4
Do not connect
Do not connect
N.C.
5 DO NOT CONNECT
Note: Pins 5 and 8 are for mounting and
retaining purposes only. Do not
electrically connect these pins.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Lead Soldering Cycle
Forward Input Current
Reverse Input Voltage
Symbol
Min.
–40
–40
Max.
+85
+85
260
10
1000
80
5
Units
°C
°C
°C
sec
mA
Reference
T
S
T
A
Temp.
Time
Note 1
I
Note 2, 3
FPK
I
Fdc
V
BR
V
Notes:
1. 1.6 mm below seating plane.
2. Recommended operating range between 10 and 750 mA.
3. 1 µs pulse, 20 µs period.
All HFBR-15XX LED transmitters are classified as IEC 825-1 Accessible
Emission Limit (AEL) Class 1 based upon the current proposed draft scheduled
to go into effect on January 1, 1997. AEL Class 1 LED devices are considered
eye safe. Contact your Agilent sales representative for more information.
Transmitter Electrical/Optical Characteristics 0°C to 70°C unless otherwise specified.
For forward voltage and output power vs. drive current graphs.
Parameter
Transmitter HFBR-15X2
Output
Symbol
Min. Typ.
–13.6
–11.2
–17.8
–15.5
Max. Units
–4.5
–5.1
–4.5
–5.1
Conditions
dBm IFdc = 60 mA
IFdc = 60 mA, 25°C
dBm IFdc = 60 mA
IFdc = 60 mA, 25°C
Ref.
PT
Optical
HFBR-15X4
PT
Power
Output Optical Power
Temperature Coefficient
Peak Emission Wavelength
Forward Voltage
Forward Voltage
Temperature Coefficient
Effective Diameter
Numerical Aperture
Reverse Input Breakdown
Voltage
∆PT/∆T
–0.85
660
1.67
–1.37
%/°C
λPK
VF
∆VF/∆T
nm
V
mV/°C
1.45
5.0
2.02
IFdc = 60 mA
Fig. 11
DT
NA
VBR
1
0.5
11.0
mm
V
IFdc = 10 µA,
T = 25°C
A
Diode Capacitance
Rise Time
Fall Time
CO
tr
tf
86
80
40
pF
ns
ns
VF = 0, f = 1 MHz
10% to 90%,
Note 1
I = 60 mA
F
Note:
1. Rise and fall times are measured with a voltage pulse driving the transmitter and a series connected 50 Ω load. A wide bandwidth
optical to electrical waveform analyzer, terminated to a 50 Ω input of a wide bandwidth oscilloscope, is used for this response time
measurement.
14
HFBR-25X2/25X4 Receivers
Pin #
Function
DO NOT CONNECT
5
1
2
3
4
5
8
V
O
1000 Ω
R
L
4
3
Ground
V
CC
V
CC
GROUND
2
1
R
L
V
O
Do not connect
Do not connect
DO NOT CONNECT
8
Note: Pins 5 and 8 are for mounting and
retaining purposes only. Do not
electrically connect these pins.
Absolute Maximum Ratings
Parameter
Symbol
Min.
–40
–40
Max.
+85
+85
260
10
Units
°C
°C
°C
sec
V
Reference
Storage Temperature
Operating Temperature
T
S
T
A
Lead Soldering Cycle
Temp.
Time
Note 1
Note 2
Supply Voltage
V
–0.5
7
CC
Output Collector Current
Output Collector Power Dissipation
Output Voltage
I
P
25
40
18
mA
mW
V
OAV
OD
V
V
–0.5
–5
O
P
Pull-up Voltage
V
V
CC
Fan Out (TTL)
N
5
Notes:
1. 1.6 mm below seating plane.
2. It is essential that a bypass capacitor 0.01 µF be connected from pin 2 to pin 3 of the receiver. Total lead length between both ends
of the capacitor and the pins should not exceed 20 mm.
Receiver Electrical/Optical Characteristics 0°C to 70°C, 4.75 V ≤ VCC ≤ 5.25 V unless otherwise
specified.
Parameter
Symbol Min. Typ.
Max. Units
Conditions
Ref.
Receiver
HFBR-2522
PR(L)
–24
dBm VOL = 0 V
Notes 1, 2, 3
Optical Input
Power Level
Logic 0
IOL = 8 mA
HFBR-2524
–20
Note 4
Optical Input Power
Level Logic 1
PR(H)
-43
dBm VOH = 5.25 V
IOH = ≤ 250 µA
High Level Output Current
Low Level Output Voltage
IOH
VOL
5
0.4
250
0.5
µA
V
VO = 18 V, PR = 0
IOL = 8 mA
Note 5
Note 5
PR = PR(L)MIN
High Level Supply Current
Low Level Supply Current
ICCH
ICCL
3.5
6.2
6.3
10
mA
mA
mm
VCC = 5.25 V,
PR = 0
VCC = 5.25 V,
Note 5
Note 5
PR = -12.5 dBm
Effective Diameter
D
1
Numerical Aperture
Internal Pull-up Resistor
NA
RL
0.5
1000
680
1700
Ω
Notes:
1. Measured at the end of the fiber optic cable with large area detector.
2. Pulsed LED operation at I > 80 mA will cause increased link t
propagation delay time. This extended t
time contributes to
PLH
F
PLH
increased pulse width distortion of the receiver output signal.
3. The LED drive circuit of Figure 11 is required for 1 MBd operation of the HFBR-25X2/25X4.
4. Optical flux, P (dBm) = 10 Log [P(µW)/1000 µW].
5. R is open.
L
15
40 kBd Link
System Performance Under recommended operating conditions unless otherwise specified.
Parameter
Data Rate
Symbol Min. Typ. Max. Units
Conditions
BER ≤ 10-9, PRBS: 27 - 1
Ref.
dc
40
kBd
Link Distance
(Standard Cable)
13
94
41
138
m
m
IFdc = 2 mA
IFdc = 60 mA
Fig. 21
Note 1
Link Distance
(Improved Cable)
15
111
45
154
m
m
IFdc = 2 mA
IFdc = 60 mA
Fig. 22
Note 1
Propagation
Delay
tPLH
tPHL
4
2.5
µs
µs
RL = 3.3 kΩ, CL = 30 pF Fig. 22, 25
PR = -25 dBm, 1 m fiber
Note 2
Pulse Width
tD
7
µs
-39 ≤ PR≤ - 14 dBm
Fig. 23, 24
Distortion tPLH-tPHL
RL = 3.3 kΩ, CL = 30 pF
Notes:
1. Estimated typical link life expectancy at 40°C exceeds 10 years at 60 mA.
2. The propagation delay for one metre of cable is typically 5 ns.
Figure 20. Typical 40 kBd Interface Circuit.
120
100
80
120
100
80
60
60
40
40
20
20
10
10
6
4
6
4
HFBR-15X3/25X3
HFBR-15X3/25X3
2
1
0°C–70°C
25°C
0°C–70°C
25°C
2
0
10 20 30 40 50 60 70 80 90 100
0
10 20 30 40 50 60 70 80 90 100 110
– CABLE LENGTH – METRES
– CABLE LENGTH – METRES
Figure 21. Guaranteed System Performance with
Standard Cable.
Figure 22. Guaranteed System Performance with Improved
Cable.
16
Figure 23. 40 kBd Propagation Delay Test Circuit.
8
6
5
4
7
6
5
t
PLH
4
3
2
3
2
1
t
PHL
-28
1
0
0
-40
-34
-28
-22
-16
-10
-40
-34
-22
-16
-10
P
– INPUT OPTICAL POWER, dBm
P
R
– INPUT OPTICAL POWER, dBm
R
Figure 24. Typical Link Pulse Width Distortion vs.
Optical Power.
Figure 25. Typical Link Propagation Delay vs. Optical
Power.
Figure 26. Propagation Delay Test Waveforms.
17
HFBR-15X3 Transmitter
Pin #
Function
Anode
Cathode
Open
Open
1
2
3
4
5
8
8 DO NOT CONNECT
1
2
3
4
ANODE
CATHODE
N.C.
N.C.
Do not connect
Do not connect
5 DO NOT CONNECT
Note: Pins 5 and 8 are for mounting and
retaining purposes only. Do not
electrically connect these pins.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Lead Soldering Cycle
Forward Input Current
Reverse Input Voltage
Symbol
Min.
–40
–40
Max.
+85
+85
260
10
1000
80
5
Units
°C
°C
°C
sec
mA
Reference
T
S
T
A
Temp.
Time
Note 1
I
Note 2, 3
FPK
I
Fdc
V
BR
V
Notes:
1. 1.6 mm below seating plane.
2. Recommended operating range between 10 and 750 mA.
3. 1 µs pulse, 20 µs period.
All HFBR-15XX LED transmitters are classified as IEC 825-1 Accessible
Emission Limit (AEL) Class 1 based upon the current proposed draft scheduled
to go into effect on January 1, 1997. AEL Class 1 LED devices are considered
eye safe. Contact your Agilent sales representative for more information.
Transmitter Electrical/Optical Characteristics 0°C to 70°C unless otherwise specified.
For forward voltage and output power vs. drive current graphs.
Parameter
Symbol
Min. Typ.
Max. Units
Conditions
Ref.
Transmitter Output
Optical Power
PT
–11.2
–13.6
–35.5
–5.1
–4.5
dBm IFdc = 60 mA, 25°C Notes 3, 4
IFdc = 60 mA
IFdc = 2 mA, 0-70°C Fig. 9, 10
Output Optical Power
Temperature Coefficient
Peak Emission
Wavelength
∆PT/∆T
–0.85
660
%/°C
λPK
nm
Forward Voltage
Forward Voltage
Temperature Coefficient
Effective Diameter
Numerical Aperture
VF
∆VF/∆T
1.45
5.0
1.67
–1.37
2.02
V
IFdc = 60 mA
mV/°C
Fig. 18
D
NA
VBR
1
0.5
11.0
mm
V
Reverse Input Breakdown
Voltage
IFdc = 10 µA,
TA = 25°C
Diode Capacitance
Rise Time
Fall Time
CO
tr
tf
86
80
40
pF
ns
VF = 0, f = 1 MHz
10% to 90%,
I = 60 mA
F
Note 1
Note:
1. Rise and fall times are measured with a voltage pulse driving the transmitter and a series connected 50 Ω load. A wide bandwidth
optical to electrical waveform analyzer, terminated to a 50 Ω input of a wide bandwidth oscilloscope, is used for this response time
measurement.
18
HFBR-25X3 Receiver
Pin #
Function
DO NOT CONNECT
5
1
2
3
4
5
8
V
O
V
CC
4
3
Ground
Open
OPEN
GROUND
2
1
V
CC
V
O
Do not connect
Do not connect
DO NOT CONNECT
8
Note: Pins 5 and 8 are for mounting and
retaining purposes only. Do not
electrically connect these pins.
Absolute Maximum Ratings
Parameter
Symbol
Min.
–40
–40
Max.
+85
+85
260
10
7
5
25
7
Units
°C
°C
°C
sec
V
mA
mW
V
Reference
Storage Temperature
Operating Temperature
T
S
T
A
Lead Soldering Cycle
Temp.
Time
Note 1
Note 2
Supply Voltage
V
–0.5
–1
CC
Average Output Collector Current
Output Collector Power Dissipation
Output Voltage
I
O
P
OD
V
O
–0.5
Notes:
1. 1.6 mm below seating plane.
2. It is essential that a bypass capacitor 0.01 µF be connected from pin 2 to pin 3 of the receiver.
Receiver Electrical/Optical Characteristics 0°C to 70°C, 4.5 V ≤ VCC ≤ 5.5 V unless otherwise
specified.
Parameter
Input Optical Power
Level Logic 0
Symbol Min. Typ. Max. Units
Conditions
Ref.
PR(L)
–39
–39
–13.7 dBm VO = VOL, IOL = 3.2 mA Notes 1,
2, 3
–13.3
–53
VO = VOL,
IOH = 8 mA, 25°C
Input Optical Power
Level Logic 1
High Level Output Voltage
Low Level Output Voltage
PR(H)
VOH
dBm VOH = 5.5 V
Note 3
IOH = ≤ 40 µA
IO = -40 µA, PR = 0 µW
IOL = 3.2 mA
PR = PR(L)MIN
VCC = 5.5 V, PR = 0 µW
2.4
V
V
V
OL
0.4
Note 4
Note 4
High Level Supply Current
Low Level Supply Current
ICCH
ICCL
1.2
2.9
1.9
3.7
mA
mA
VCC = 5.5 V,
PR = PRL (MIN)
Effective Diameter
Numerical Aperture
D
NA
1
0.5
mm
Notes:
1. Measured at the end of the fiber optic cable with large area detector.
2. Optical flux, P (dBm) = 10 Log P(µW)/1000 µW.
3. Because of the very high sensitivity of the HFBR-25X3, the digital output may switch in response to ambient light levels when a
cable is not occupying the receiver optical port. The designer should take care to filter out signals from this source if they pose a
hazard to the system.
4. Including current in 3.3 k pull-up resistor.
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
June 12, 2001
Obsoletes 5968-1712E
5988-1765EN
WWW.ALLDATASHEET.COM
Copyright © Each Manufacturing Company.
All Datasheets cannot be modified without permission.
This datasheet has been download from :
www.AllDataSheet.com
100% Free DataSheet Search Site.
Free Download.
No Register.
Fast Search System.
www.AllDataSheet.com
相关型号:
©2020 ICPDF网 联系我们和版权申明