HLMP-EG55-MP0DD
更新时间:2024-09-18 02:38:38
品牌:AGILENT
描述:T-1 3/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps
HLMP-EG55-MP0DD 概述
T-1 3/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps T-1 3/4 ( 5mm)的精密光学性能的AlInGaP LED灯
HLMP-EG55-MP0DD 数据手册
通过下载HLMP-EG55-MP0DD数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载T-13/ 4 (5 mm) Precision Optical
Performance AlInGaP LED Lamps
Technical Data
SunPower Series
HLMP-EL55
HLMP-EH55
HLMP-EG55
HLMP-EL57
HLMP-EH57
HLMP-EG57
Features
Applications
• Well Defined and Smooth
Spatial Radiation Patterns
• Wide Viewing Angle
• Tinted Diffused Lamp
• High Luminous Output
• Traffic Management:
Variable Message Signs
Traffic Management Signs
• Commercial Indoor/Outdoor
Advertising:
Signs
Marquees
Passenger Information
• Colors:
590/592 nm Amber
615/617 nm Reddish-Orange
626/630 nm Red
• Automotive:
Exterior and Interior Lights
• High Operating Temperature:
TJLED = +130°C
• Superior Resistance to
Moisture
Description
There are two families of amber,
red, and red-orange lamps;
AlInGaP and the higher
These Precision Optical Perform-
ance AlInGaP LEDs provide
superior light output for
excellent readability in sunlight
and are extremely reliable.
AlInGaP LED technology
provides extremely stable light
output over long periods of time.
Precision Optical Performance
lamps utilize the aluminum
indium gallium phosphide
(AlInGaP) technology.
performance AlInGaP II.
Benefits
• Viewing Angles Match Traffic
Management Sign
Requirements
• Colors Meet Automotive
Specifications
• Superior Performance in
Outdoor Environments
• Suitable for Autoinsertion
onto PC Boards
The high maximum LED
junction temperature limit of
+130° C enables high
temperature operation in bright
sunlight conditions.
These lamps are available in two
package options to give the
designer flexibility with device
mounting.
These LED lamps are tinted,
diffused, T-13/4 packages
incorporating second generation
optics producing well defined
radiation patterns at specific
viewing cone angles.
2
Part Numbering System
HLMP - x x xx - x x x xx
Mechanical Options
00: Bulk Packaging
DD: Ammo Pack
Color Bin Selections
0: No color bin limitation
4: Amber color bin 4 only
K: Amber color bins 2 and 4 only
Maximum Intensity Bin
Minimum Intensity Bin
Viewing Angle & Lead Stand Offs
55: 55 deg without lead stand offs; AlInGaP
57: 55 deg without lead stand offs; AlInGaP II
Color
D: 630 nm Red
G: 626 nm Red
H: 615/617 nm Red-Orange
L: 590/592 Amber
Package
E: 5 mm Round
Device Selection Guide (AlInGaP)
Typical
Viewing
Angle
Color and
Dominant
Wavelength
(nm), Typ.[3]
Luminous
Intensity Iv (mcd) [1,2]
@20 mA
Lamps Without Standoffs
on Leads
(Outline Drawing A)
2θ1/ 2
(Deg.)[4]
Min.
Max.
400
55°
Amber 590
Red-Orange 615
Red 626
HLMP-EL55-GK000
HLMP-EH55-GK000
HLMP-EG55-GK000
140
140
140
400
400
Device Selection Guide (AlInGaP II)
Typical
Viewing
Angle
Color and
Dominant
Wavelength
(nm), Typ.[3]
Luminous
Lamps Without Standoffs
on Leads
(Outline Drawing A)
Intensity Iv (mcd) [1,2]
@20 mA
2θ1/ 2
(Deg.)[4]
Min.
Max.
1150
1150
1150
55°
Amber 592
Red-Orange 617
Red 630
HLMP-EL57-LP000
HLMP-EH57-LP000
HLMP-ED57-LP000
400
400
400
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package.
2. The optical axis is closely aligned with the package mechanical axis.
3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
4. θ1/ 2 is the off-axis angle where the luminous intensity is one half the on-axis intensity.
3
Package Dimensions
5.00 ± 0.20
(0.197 ± 0.008)
1.14 ± 0.20
(0.045 ± 0.008)
8.71 ± 0.20
(0.343 ± 0.008
2.35 (0.093)
MAX.
31.60
(1.244)
MIN.
0.70 (0.028)
MAX.
CATHODE
LEAD
0.50 ± 0.10
(0.020 ± 0.004)
SQ. TYP.
1.00
(0.039)
MIN.
5.80 ± 0.20
(0.228 ± 0.008)
CATHODE
FLAT
2.54 ± 0.38
(0.100 ± 0.015)
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. LEADS ARE MILD STEEL, SOLDER DIPPED.
3. TAPERS SHOWN AT TOP OF LEADS (BOTTOM OF LAMP PACKAGE) INDICATE AN
EPOXY MENISCUS THAT MAY EXTEND ABOUT 1 mm (0.040 in.) DOWN THE LEADS.
4. RECOMMENDED PC BOARD HOLE DIAMETERS:
LAMP PACKAGE WITHOUT STAND-OFFS: FLUSH MOUNTING AT BASE OF
LAMP PACKAGE = 1.143/ 1.067 (0.044/ 0.042).
4
Absolute Maximum Ratings at T = 25°C
A
DC Forward Current[1,2,3] ..................................................................50 mA
Peak Pulsed Forward Current[2,3] ................................................. 100 mA
Average Forward Current[3] .............................................................30 mA
Reverse Voltage (IR = 100 µA)................................................................ 5 V
LED Junction Temperature .............................................................. 130° C
Operating Temperature .................................................. –40° C to +100° C
Storage Temperature ...................................................... –40° C to +120° C
Through-the-Wave Solder Temperature ................ 250° C for 3 seconds
[1.59 mm (0.060 in.) below body]
Notes:
1. Derate linearly as shown in Figure 4.
2. For long term performance with minimal light output degradation, drive currents
between 10 mA and 30 mA are recommended. For more information on recommended
drive conditions, please refer to Application Brief I-024 (5966-3087E).
3. Please contact your Agilent Technologies sales representative about operating currents
below 10 mA.
Electrical/ Optical Characteristics at T = 25°C
A
Parameter
Symbol
Min.
Typ.
Max.
Units
Test Conditions
IF = 20 mA
Forward Voltage
V
F
V
Amber (λd = 590 nm)
Amber (λd = 592 nm)
Red-Orange (λd = 615 nm)
Red-Orange (λd = 617 nm)
Red (λd = 626 nm)
2.02
2.15
1.94
2.08
1.90
2.00
2.4
2.4
2.4
2.4
2.4
2.4
Red (λd = 630 nm)
Reverse Voltage
V
R
5
20
V
IR = 100 µA
Peak Wavelength
λPEAK
nm
Peak of Wavelength of
Spectral Distribution
at IF = 20 mA
Amber (λd = 590 nm)
Amber (λd = 592 nm)
Red-Orange (λd = 615 nm)
Red-Orange (λd = 617 nm)
Red (λd = 626 nm)
592
594
621
623
635
639
Red (λd = 630 nm)
Spectral Halfwidth
∆λ1/ 2
17
nm
ns
Wavelength Width at
Spectral Distribution
1/ 2 Power Point at
IF = 20 mA
Speed of Response
τs
20
Exponential Time
Constant, e-t/ τ
s
Capacitance
C
40
pF
V = 0, f = 1 MHz
F
Thermal Resistance
RθJ-PIN
240
°C/ W
LED Junction-to-Cathode
Lead
Luminous Efficacy[1]
Amber (λd = 590 nm)
Amber (λd = 592 nm)
Red-Orange (λd = 615 nm)
Red-Orange (λd = 617 nm)
Red (λd = 626 nm)
ηv
lm/ W
Emitted Luminous
Power/ Emitted Radiant
Power
480
500
260
235
150
155
Red (λd = 630 nm)
Note:
1. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/ ηv, where Iv is the luminous intensity in candelas and ηv is
the luminous efficacy in lumens/ watt.
5
1.0
RED-ORANGE
RED
AMBER
0.5
0
500
550
600
650
700
WAVELENGTH – nm
Figure 1. Relative Intensity vs. Peak Wavelength.
3.0
2.5
2.0
1.5
1.0
100
90
50
40
30
20
80
70
Rθ = 585° C/ W
JA
60
RED
50
Rθ = 780° C/ W
JA
40
AMBER
30
20
10
0
0.5
0
10
0
1.0
0
20
40
60
1.5
2.0
2.5
3.0
0
20
– AMBIENT TEMPERATURE – °C
A
40
60
80
100
I – DC FORWARD CURRENT – mA
V – FORWARD VOLTAGE – V
T
F
F
Figure 2. Forward Current vs. Forward
Voltage.
Figure 3. Relative Luminous Intensity vs.
Forward Current.
Figure 4. Maximum Forward Current vs.
Ambient Temperature. Derating Based on
TJMAX = 130°C.
100
90
80
70
60
50
40
30
20
10
0
-100
-80
-60
-40
-20
0
20
40
60
80
100
θ – ANGULAR DISPLACEMENT – DEGREES
Figure 5. Representative Spatial Radiation Pattern for 55° Viewing Angle Lamps.
Intensity Bin Limits
(mcd at 20 mA)
Amber Color Bin Limits
(nm at 20 mA)
Bin
Bin
Name
Min.
140
180
240
310
400
520
680
880
Max.
180
240
310
400
520
680
880
1150
Name
Min.
584.5
587.0
589.5
592.0
Max.
587.0
589.5
592.0
594.5
G
1
2
4
6
H
J
K
L
Tolerance for each bin limit is ± 0.5 nm.
M
N
Note:
P
1. Bin categories are established for
classification of products. Products
may not be available in all bin
categories.
Tolerance for each bin limit is ± 15%.
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152 (Domestic/Interna-
tional), or 0120-61-1280 (Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2004 Agilent Technologies, Inc.
Obsoletes 5988-1855E
July 13, 2004
5988-3460EN
HLMP-EG55-MP0DD 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
HLMP-EG55-MP400 | AGILENT | T-1 3/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps | 获取价格 | |
HLMP-EG55-MP4DD | AGILENT | T-1 3/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps | 获取价格 | |
HLMP-EG55-MPK00 | AGILENT | T-1 3/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps | 获取价格 | |
HLMP-EG55-MPKDD | AGILENT | T-1 3/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps | 获取价格 | |
HLMP-EG55-NG000 | AGILENT | T-1 3/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps | 获取价格 | |
HLMP-EG55-NG0DD | AGILENT | T-1 3/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps | 获取价格 | |
HLMP-EG55-NG400 | AGILENT | T-1 3/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps | 获取价格 | |
HLMP-EG55-NG4DD | AGILENT | T-1 3/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps | 获取价格 | |
HLMP-EG55-NGK00 | AGILENT | T-1 3/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps | 获取价格 | |
HLMP-EG55-NGKDD | AGILENT | T-1 3/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps | 获取价格 |
HLMP-EG55-MP0DD 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6