HLMP-EJ24-SV0DD [AGILENT]
Single Color LED, Orange, Clear, T-1 3/4, 5mm;
| 型号： | HLMP-EJ24-SV0DD |
| 厂家： | 
AGILENT TECHNOLOGIES, LTD. |
| 描述： | Single Color LED, Orange, Clear, T-1 3/4, 5mm |
| 文件： | 总10页 (文件大小：192K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
T-13/4 (5 mm) Precision Optical
Performance AlInGaP LED
Lamps
SunPower Series
HLMP-ELxx
HLMP-EJxx
HLMP-EHxx
HLMP-EGxx
Technical Data
Features
• Well Defined Spatial
Radiation Patterns
Applications
• Traffic Management:
Traffic Signals
Pedestrian Signals
Work Zone Warning Lights
Variable Message Signs
• Commercial Outdoor
Advertising:
Signs
Marquees
• Automotive:
Exterior and Interior Lights
• Viewing Angles: 6°, 15°,
23°, 30°
• High Luminous Output
• Colors:
590 nm Amber
605 nm Orange
615 nm Reddish-Orange
626 nm Red
• High Operating
Temperature:
Description
TJ LED = +130°C
These lamps are made with an
advanced optical grade epoxy,
offering superior high tempera-
ture and high moisture resistance
performance in outdoor signal
and sign applications. The high
maximum LED junction tempera-
ture limit of +130°C enables high
temperature operation in bright
sunlight conditions. The package
epoxy contains both uv-a and
uv-b inhibitors to reduce the
effects of long term exposure to
direct sunlight.
These Precision Optical Perform-
ance AlInGaP LEDs provide
• Superior Resistance to
Moisture
• Package Options:
With or Without Lead Stand-
Offs
superior light output for excellent
readability in sunlight and are
extremely reliable. AlInGaP LED
technology provides extremely
stable light output over long
periods of time. Precision Optical
Performance lamps utilize the
aluminum indium gallium phos-
phide (AlInGaP) technology.
Benefits
• Viewing Angles Match
Traffic Management Sign
Requirements
• Colors Meet Automotive and
Pedestrian Signal
Specifications
• Superior Performance in
Outdoor Environments
These LED lamps are untinted,
nondiffused, T-13/4 packages
incorporating second generation
optics producing well defined
spatial radiation patterns at
specific viewing cone angles.
These lamps are available in two
package options to give the
designer flexibility with device
mounting.
• Suitable for Autoinsertion
onto PC Boards
2
“24” =23 degree without lead
standoffs
“26” =23 degree with lead
standoffs
“30” =30 degree without lead
standoffs
“32” =30 degree with lead
standoffs
“K” =amber color bins 2
and 4 only (refer to
table on page 9)
“4” =amber color bin 4 only
(refer to table on
Part Numbering Scheme
HLMP-E(1)(2)(3)-
(4)(5)(6)(7)(8)
where (1) = Color
“L” =592 nm Amber
“J” =605 nm Orange
“H” =615 nm Reddish-
orange
page 9)
where (7)(8) = Mechanical
or Packaging Option
“00” =bulk packaging,
minimum increment
500/bag
“DD”=ammo pack, minimum
increment 2000/box.
Available for products
shown in BOLD in
selection guide.
“G” =626 nm Red
where (2)(3) = Viewing
Angle and Lead Standoffs
“08” =6 degree without lead
standoffs
“10” =6 degree with lead
standoffs
“15” =15 degree without lead
standoffs
where (4) = Minimum
Intensity Bin (refer to
table on page 9)
where (5) = Maximum
Intensity Bin (refer to
table on page 9)
where (6) = Color Bin
Selection
“0” = no color bin limitation
Refer to the device selection
guides for available
combinations.
“17” =15 degree with lead
standoffs
Device Selection Guide
Typical
Viewing
Angle
2θ1/2
Color and
Dominant
Wavelength
Luminous
Intensity Iv (mcd)
@ 20 mA
[1,2]
Lamps Without Standoffs
Lamps With Standoffs
on Leads
(Outline Drawing B)
on Leads
(Outline Drawing A)
[4]
[3]
(Deg.)
(nm), Typ.
Min.
3600
4700
6200
6200
6200
6200
6200
6200
6200
Max.
HLMP-EL08-VY000
HLMP-EL08-WZ000
HLMP-EL08-XZ400**
HLMP-EL08-XZ000
HLMP-EL08-XZK00*
HLMP-EL08-XY000
HLMP-EL08-XYK00*
HLMP-EL08-X1K00*
HLMP-EL08-X1000
HLMP-EL10-VY000
HLMP-EL10-WZ000
13800
18400
18400
18400
18400
13800
13800
24100
24100
6°[5]
Amber 590
HLMP-EL10-X1000
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package.
2. The optical axis is closely aligned with the package mechanical axis.
3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity.
5. The intensity of narrow viewing angle lamps is measured at the intensity peak.
Part numbers in bold are recommended for new designs.
*HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only.
**HLMP-xLxx-xx400 are selected to amber color bin 4 only.
3
Device Selection Guide (Continued)
Typical
Viewing
Angle
2θ1/2
Color and
Dominant
Wavelength
Luminous
Intensity Iv (mcd)
@ 20 mA
[1,2]
Lamps Without Standoffs
on Leads
Lamps With Standoffs
on Leads
(Outline Drawing B)
[4]
[3]
(Deg.)
(nm), Typ.
(Outline Drawing A)
Min.
4700
6200
8000
4700
6200
8000
4700
6200
8000
8000
8000
765
Max.
HLMP-EJ08-WZ000
HLMP-EJ08-X1000
HLMP-EJ08-Y2000
HLMP-EH08-WZ000
HLMP-EJ10-WZ000
HLMP-EJ10-X1000
HLMP-EJ10-Y2000
HLMP-EH10-WZ000
HLMP-EH10-X1000
HLMP-EH10-Y2000
HLMP-EG10-WZ000
HLMP-EG10-X1000
18400
Orange 605
24100
31000
18400
24100
31000
18400
24100
18400
24100
31000
2900
Red-Orange 615 HLMP-EH08-X1000
HLMP-EH08-Y2000
6°[5]
HLMP-EG08-WZ000
HLMP-EG08-X1000
Red 626
HLMP-EG08-YZ000
HLMP-EG08-Y1000
HLMP-EG08-Y2000
HLMP-EL15-PS000
HLMP-EL15-QR000
HLMP-EL15-QRK00*
HLMP-EL15-QS000
HLMP-EL15-QS400**
HLMP-EL15-QSK00*
HLMP-EL15-QT000
HLMP-EL15-QTK00*
HLMP-EL15-RU000
HLMP-EL15-SV000
HLMP-EJ15-RU000
HLMP-EJ15-SV000
HLMP-EJ15-TW000
HLMP-EG10-Y2000
HLMP-EL17-PS000
1000
1000
1000
1000
1000
1000
1000
1300
1650
1300
1650
2170
2200
2200
2900
2900
Amber 590
2900
15°
HLMP-EL17-QT000
3700
3700
HLMP-EL17-RU000
HLMP-EL17-SV000
HLMP-EJ17-RU000
HLMP-EJ17-SV000
HLMP-EJ17-TW000
4800
6300
4800
Orange 605
6300
8300
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package.
2. The optical axis is closely aligned with the package mechanical axis.
3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity.
5. The intensity of narrow viewing angle lamps is measured at the intensity peak.
Part numbers in bold are recommended for new designs.
*HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only.
**HLMP-xLxx-xx400 are selected to amber color bin 4 only.
4
Device Selection Guide (Continued)
Typical
Viewing
Angle
2θ1/2
Color and
Dominant
Wavelength
Luminous
Intensity Iv (mcd)
@ 20 mA
[1,2]
Lamps Without Standoffs
on Leads
Lamps With Standoffs
on Leads
(Outline Drawing B)
[4]
[3]
(Deg.)
(nm), Typ.
(Outline Drawing A)
Min.
1000
1300
1650
1000
1300
1650
590
Max.
HLMP-EH15-QT000
HLMP-EH17-QT000
HLMP-EH17-RU000
HLMP-EH17-SV000
HLMP-EG17-QT000
HLMP-EG17-RU000
HLMP-EG17-SV000
HLMP-EL26-NR000
HLMP-EL26-PS000
3700
Red-Orange 615 HLMP-EH15-RU000
HLMP-EH15-SV000
4800
6300
3700
4800
6300
2200
2900
2200
2200
2900
2900
2900
3700
3700
3700
4800
6300
2900
3700
4800
2900
3700
4800
15°
HLMP-EG15-QT000
Red 626
Amber 590
Orange 605
HLMP-EG15-RU000
HLMP-EG15-SV000
HLMP-EL24-NR000
HLMP-EL24-PS000
HLMP-EL24-QR000
HLMP-EL24-QRK00*
HLMP-EL24-QS000
HLMP-EL24-QSK00*
HLMP-EL24-QS400**
HLMP-EL24-QT000
HLMP-EL24-QTK00*
HLMP-EJ24-QT000
HLMP-EJ24-RU000
HLMP-EJ24-SV000
HLMP-EH24-PS000
765
1000
1000
1000
1000
1000
1000
1000
1000
1300
1650
765
HLMP-EL26-QT000
23°
HLMP-EJ26-QT000
HLMP-EJ26-RU000
HLMP-EJ26-SV000
HLMP-EH26-PS000
HLMP-EH26-QT000
HLMP-EH26-RU000
HLMP-EG26-PS000
HLMP-EG26-QT000
HLMP-EG26-RU000
Red-Orange 615 HLMP-EH24-QT000
HLMP-EH24-RU000
1000
1300
765
HLMP-EG24-PS000
Red 626
HLMP-EG24-QT000
1000
1300
HLMP-EG24-RU000
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package.
2. The optical axis is closely aligned with the package mechanical axis.
3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity.
5. The intensity of narrow viewing angle lamps is measured at the intensity peak.
Part numbers in bold are recommended for new designs.
*HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only.
**HLMP-xLxx-xx400 are selected to amber color bin 4 only.
5
Device Selection Guide (Continued)
Typical
Viewing
Angle
2θ1/2
Color and
Dominant
Wavelength
Luminous
Intensity Iv (mcd)
@ 20 mA
[1,2]
Lamps Without Standoffs
on Leads
Lamps With Standoffs
on Leads
(Outline Drawing B)
[4]
[3]
(Deg.)
(nm), Typ.
(Outline Drawing A)
Min.
450
590
765
765
765
765
765
765
765
590
765
1000
450
590
765
450
590
590
765
765
765
Max.
HLMP-EL30-MQ000
HLMP-EL30-NR000
HLMP-EL30-PQ000
HLMP-EL30-PQK00*
HLMP-EL30-PR000
HLMP-EL30-PR400**
HLMP-EL30-PRK00*
HLMP-EL30-PS000
HLMP-EL30-PSK00*
HLMP-EJ30-NR000
HLMP-EJ30-PS000
HLMP-EJ30-QT000
HLMP-EH30-MQ000
HLMP-EL32-MQ000
HLMP-EL32-NR000
1730
2200
1730
1730
2200
2200
2200
2900
2900
2200
2900
3700
1730
2200
2900
1730
1730
2200
1730
2200
2900
Amber 590
HLMP-EL32-PS000
HLMP-EJ32-NR000
HLMP-EJ32-PS000
HLMP-EJ32-QT000
HLMP-EH32-MQ000
HLMP-EH32-NR000
HLMP-EH32-PS000
HLMP-EG32-MQ000
30°
Orange 605
Red-Orange 615 HLMP-EH30-NR000
HLMP-EH30-PS000
HLMP-EG30-MQ000
HLMP-EG30-NQ000
HLMP-EG30-NR000
Red 626
HLMP-EG32-NR000
HLMP-EG30-PQ000
HLMP-EG30-PR000
HLMP-EG30-PS000
HLMP-EG32-PS000
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package.
2. The optical axis is closely aligned with the package mechanical axis.
3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity.
5. The intensity of narrow viewing angle lamps is measured at the intensity peak.
Part numbers in bold are recommended for new designs.
*HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only.
**HLMP-xLxx-xx400 are selected to amber color bin 4 only.
6
Package Dimensions
5.00 ± 0.20
(0.197 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
A
B
1.14 ± 0.20
(0.045 ± 0.008)
8.71 ± 0.20
(0.343 ± 0.008)
8.71 ± 0.20
(0.343 ± 0.008)
d
1.14 ± 0.20
(0.045 ± 0.008)
2.35 (0.093)
MAX.
0.70 (0.028)
MAX.
1.50 ± 0.15
(0.059 ± 0.006)
31.60
MIN.
31.60
(1.244)
MIN.
(1.244)
0.70 (0.028)
MAX.
CATHODE
LEAD
CATHODE
LEAD
0.50 ± 0.10
(0.020 ± 0.004)
0.50 ± 0.10
(0.020 ± 0.004)
SQ. TYP.
1.00
MIN.
SQ. TYP.
1.00
(0.039)
MIN.
(0.039)
5.80 ± 0.20
5.80 ± 0.20
(0.228 ± 0.008)
(0.228 ± 0.008)
CATHODE
FLAT
CATHODE
FLAT
2.54 ± 0.38
2.54 ± 0.38
(0.100 ± 0.015)
(0.100 ± 0.015)
NOTES:
PART NO.
d
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. LEADS ARE MILD STEEL, SOLDER DIPPED.
3. TAPERS SHOWN AT TOP OF LEADS (BOTTOM OF LAMP PACKAGE) INDICATE AN
EPOXY MENISCUS THAT MAY EXTEND ABOUT 1 mm (0.040 in.) DOWN THE LEADS.
4. RECOMMENDED PC BOARD HOLE DIAMETERS:
HLMP-XX10
HLMP-XX17
HLMP-XX26
HLMP-XX32
12.37 ± 0.25
(0.487 ± 0.010)
12.42 ± 0.25
(0.489 ± 0.010)
12.52 ± 0.25
(0.493 ± 0.010)
•
LAMP PACKAGE A WITHOUT STAND-OFFS: FLUSH MOUNTING AT BASE OF
LAMP PACKAGE = 1.143/1.067 (0.044/0.042).
11.96 ± 0.25
(0.471 ± 0.010)
•
LAMP PACKAGE B WITH STAND-OFFS: MOUNTING AT LEAD STAND-OFFS
= 0.965/0.889 (0.038/0.035).
5. FOR DOME HEIGHTS ABOVE LEAD STAND-OFF SEATING PLANE, d, LAMP PACKAGE
B, SEE TABLE.
7
Absolute Maximum Ratings at TA = 25°C
DC Forward Current[1,2,3] ............................................................ 50 mA
Peak Pulsed Forward Current[2,3] .............................................. 100 mA
Average Forward Current[3] ......................................................... 30 mA
Reverse Voltage (IR = 100 µA) ......................................................... 5 V
LED Junction Temperature.......................................................... 130°C
Operating Temperature .............................................. -40°C to +100°C
Storage Temperature .................................................. -40°C to +120°C
Dip/Drag Soldering Temperature ........................... 260°C for 6 seconds
Through-the-Wave Preheat Temperature ......................................145°C
Through-the-Wave Solder Temperature ................. 245°C for 3 seconds
[1.59 mm (0.060 in.) below seating plane]
Notes:
1. Derate linearly as shown in Figure 4.
2. For long term performance with minimal light output degradation, drive currents
between 10 mA and 30 mA are recommended. For more information on recommended
drive conditions, please refer to Application Brief I-024 (5966-3087E).
3. Operating at currents below 1 mA is not recommended. Please contact your local
representative for further information.
Electrical/Optical Characteristics at TA = 25°C
Parameter
Forward Voltage
Amber (λd = 590 nm)
Orange (λd = 605 nm)
Red-Orange (λd = 615 nm)
Red (λd = 626 nm)
Symbol
Min. Typ.
Max. Units
Test Conditions
IF = 20 mA
2.02
1.98
1.94
1.90
VF
2.4
V
V
Reverse Voltage
VR
5
20
IF = 100 µA
Peak Wavelength:
Peak of Wavelength of
Spectral Distribution
at IF = 20 mA
Amber (λd = 590 nm)
Orange (λd = 605 nm)
Red-Orange (λd = 615 nm)
Red (λd = 626 nm)
592
609
621
635
λPEAK
nm
nm
Spectral Halfwidth
∆λ1/2
17
Wavelength Width at
Spectral Distribution
1/2 Power Point at
IF = 20 mA
Speed of Response
τs
20
ns
Exponential Time
Constant, e-t/τ
s
Capacitance
C
40
pF
VF = 0, f = 1 MHz
Thermal Resistance
RθJ-PIN
240
°C/W
LED Junction-to-Cathode
Lead
Luminous Efficacy[1]
Amber (λd = 590 nm)
Orange (λd = 605 nm)
Red-Orange (λd = 615 nm)
Red (λd = 626 nm)
Emitted Luminous
Power/Emitted Radiant
Power
480
370
260
150
ηv
lm/W
Note:
1. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in
candelas and ηv is the luminous efficacy in lumens/watt.
8
100
90
80
70
60
50
40
30
20
1.0
RED-ORANGE
RED
AMBER
ORANGE
RED
0.5
AMBER
10
0
1.0
0
550
600
650
700
1.5
V – FORWARD VOLTAGE – V
F
2.0
2.5
3.0
WAVELENGTH – nm
Figure 2. Forward Current vs.
Forward Voltage.
Figure 1. Relative Intensity vs. Peak Wavelength.
3.0
2.5
2.0
1.5
1.0
50
40
30
20
Rθ = 585° C/W
JA
Rθ = 780° C/W
JA
10
0
0.5
0
0
20
40
60
0
20
T – AMBIENT TEMPERATURE – °C
A
40
60
80
100
I
– DC FORWARD CURRENT – mA
F
Figure 3. Relative Luminous Intensity
vs. Forward Current.
Figure 4. Maximum Forward Current
vs. Ambient Temperature. Derating
Based on TJMAX = 130°C.
100
90
80
70
60
50
40
30
20
10
0
-25
-20
-15
-10
-5
0
5
10
15
20
25
θ – ANGULAR DISPLACEMENT – DEGREES
Figure 5. Representative Spatial Radiation Pattern for 6 ° Viewing
Angle Lamps.
9
100
90
80
70
60
50
40
30
20
Intensity Bin Limits
(mcd at 20 mA)
Bin
Name
K
Min.
310
Max.
400
L
400
520
M
N
520
680
680
880
10
0
-25
P
880
1150
1500
1900
2500
3200
4200
5500
7200
9300
12000
16000
21000
27000
-20
-15
-10
-5
0
5
10
15
20
25
Q
R
1150
1500
1900
2500
3200
4200
5500
7200
9300
12000
16000
21000
θ – ANGULAR DISPLACEMENT – DEGREES
Figure 6. Representative Spatial Radiation Pattern for 15°Viewing
Angle Lamps.
S
T
U
V
W
X
100
90
80
70
60
50
40
30
20
Y
Z
1
2
Tolerance for each bin limit is ± 15%.
10
0
-25
-20
-15
-10
-5
0
5
10
15
20
25
HLMP-xLxx Color Bin
Limits (nm at 20 mA)
θ – ANGULAR DISPLACEMENT – DEGREES
Figure 7. Representative Spatial Radiation Pattern for 23° Viewing
Angle Lamps.
Bin
Name
Min.
584.5
587.0
589.5
592.0
Max.
587.0
589.5
592.0
594.5
1
2
4
6
100
90
80
70
60
50
40
30
20
Tolerance for each bin limit is
± 0.5 nm.
10
0
-25
-20
-15
-10
-5
0
5
10
15
20
25
Note:
θ – ANGULAR DISPLACEMENT – DEGREES
1. Bin categories are established for
classification of products. Products
may not be available in all bin
categories.
Figure 8. Representative Spatial Radiation Pattern for 30°Viewing
Angle Lamps.
www.semiconductor.agilent.com
Data subject to change.
Copyright © 1999 Agilent Technologies, Inc.
Obsoletes 5968-7459E
5968-4744E (11/99)
相关型号：
©2020 ICPDF网 联系我们和版权申明