AM1N-0515SH60-N [AIMTEC]
1 watt dc-dc converters; 1瓦特DC-DC转换器型号: | AM1N-0515SH60-N |
厂家: | AIMTEC |
描述: | 1 watt dc-dc converters |
文件: | 总3页 (文件大小:423K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AM1N-N Series
1 watt dc-dc converters
24-PIN DIP PACKAGE
•
•
•
•
INPUT/OUTPUT ISOLATION: 6000VDC
•
•
•
LOW PROFILE PLASTIC PACKAGE
HIGH EFFICIENCY UP TO 81%
UL94-VO PACKAGE
OPERATING TEMPERATURE: -40°C ... +85°C
PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS
GENERAL DESCRIPTION
Our AM1N-N series is a family of cost effective 1W
single and dual output DC-DC converters. These
converters combine plastic package in a 24-pin DIP
compatible case with high performance feature such as
6000VDC input/output isolation voltage. Twenty four
models operate from input voltages of 5, 12 & 24VDC
with output voltages of 5, 9, 12, 15, ±5, ±9, ±12, ±15VDC.
Operation is specified over the full operating temperature
range of -40°C to +85°C with no derating required.
Cooling is by free-air convection.
ELECTRICAL SPECIFICATIONS
Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified
Input Specifications:
Voltage range
Filter
Output Specifications:
±10 %
Voltage accuracy
See tolerance
Capacitor
envelope graph
Ripple & noise (at 20MHz BW) 75mVp-p, typ.
Isolation Specifications:
Rated voltage (60 sec)
Resistance
Short circuit protection
Line voltage regulation
Load voltage regulation
Temperature Coefficient
1 sec.
6000 VDC
> 1000 MOhm
±1.2%/1% of Vin max.
10%, max.
±0.03%/°C, max.
General Specifications:
Efficiency
Switching Frequency
72% to 81%
35 KHz, typ. 100% load
Environmental Specifications:
Operating temperature (ambient) -40°C to +85°C
Storage temperature
Case temperature
Derating
Humidity (non-condensing)
Cooling
-55°C to +125°C
+95°C, max.
None required
Up to 90%
Free-air Convection
Physical Specifications
Dimensions
32.3x14.7x9.4 mm
1.27x0.58x0.37 inches
16 g
Weight
Case material
Plastic UL94-VO
MTBF: > 1,211,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25°C)
Specifications are subject to change without notification
OUTLINE DIMENSIONS & PIN CONNECTIONS
Single output
Dual output
Pin
Function
Pin
Function
1
+V Input
-V Input
N.C.
1
+V Input
-V Input
-V Output
OV
2
2
8,17
10,15
12,13
8,17
10,15
12,13
OV
+V Output
+V Output
13
16 15 14
24 23 17
1
2
8 9 10 11 12
24
TO ORDER CALL 1-888-9-AIMTEC
AM1N-N Series
MODELS
Single output
Input Voltage
Ouput Voltage
Ouput Current max.
Models
AM1N-0505SH60-N
AM1N-0509SH60-N
AM1N-0512SH60-N
AM1N-0515SH60-N
AM1N-1205SH60-N
AM1N-1209SH60-N
AM1N-1212SH60-N
AM1N-1215SH60-N
AM1N-2405SH60-N
AM1N-2409SH60-N
AM1N-2412SH60-N
AM1N-2415SH60-N
5VDC
9VDC
200mA
111mA
84mA
67mA
200mA
111mA
84mA
67mA
200mA
111mA
84mA
67mA
5V ± 10%
12VDC
15VDC
5VDC
9VDC
12V ± 10%
24V ± 10%
12VDC
15VDC
5VDC
9VDC
12VDC
15VDC
Dual output
Input Voltage
Ouput Voltage
Ouput Current max.
Models
AM1N-0505DH60-N
AM1N-0509DH60-N
AM1N-0512DH60-N
AM1N-0515DH60-N
AM1N-1205DH60-N
AM1N-1209DH60-N
AM1N-1212DH60-N
AM1N-1215DH60-N
AM1N-2405DH60-N
AM1N-2409DH60-N
AM1N-2412DH60-N
AM1N-2415DH60-N
5VDC
9VDC
±100mA
±55mA
±42mA
±33mA
±100mA
±55mA
±42mA
±33mA
±100mA
±55mA
±42mA
±33mA
5V ± 10%
12VDC
15VDC
5VDC
9VDC
12V ± 10%
24V ± 10%
12VDC
15VDC
5VDC
9VDC
12VDC
15VDC
TYPICAL CHARACTERISTICS
25
Continued on next page
VISIT US AT WWW.AIMTEC.CA
AM1N-N Series
APPLICATION NOTE
Filtering
In some circuits which are sensitive to noise and ripple, a filtering capacitor may be added to the dc/dc output end and input end to reduce the noise and
ripple. However, the capacitance of the output filter capacitor must be proper. If the capacitance is too big, a startup problem might arise. For every channel
of output, provided the safe and reliable operation is ensured, the greatest capacitance of its filter capacitor sees the external capacitor table. To get an
extremely low ripple, an “LC” filtering network may be connected to the input and output ends of the dc/dc converter, which may produce a more significant
filtering effect. It should also be noted that the inductance and the frequency of the “LC” filtering network should be staggered with the dc/dc frequency
to avoid mutual interference (see figure 1).
Requirement on output load
To ensure this module can operate efficiently and reliably, a minimum load is specified for this kind of dc/dc converter in addition to a maximum load (namely
full load). During operation, make sure the specified range of input voltage is not exceeded, the minimum output load is not less than 10% of the full load,
and that this product should never be operated under no load! If the actual output power is very small, please connect a resistor with proper resistance at
the output end in parallel to increase the load.
For single output
For dual output
Overload Protection
Under normal operating conditions, the output
circuit of these products has no protection
against over-current and short-circuits. The
simplest method is to connect a self-recovery
fuse in series at the input end or add a circuit
breaker to the circuit.
Output Voltage Regulation and
Over-voltage Protection Circuit
The simplest device for output voltage
regulation, over-voltage and over-current
protection is a linear voltage stabilizer with
overheat protection that is connected to the
input or output end in series (see Figure 2).
External Capacitor Table
for Single Output
External Capacitor Table
for Dual Output
External
External
External
External
Vin
Vout
Vin
Vout
Capacitor
4.7uF
2.2uF
1uF
Capacitor
Capacitor
4.7uF
2.2uF
1uF
Capacitor
5VDC
12VDC
24VDC
-
5VDC
9VDC
12VDC
15VDC
10uF
4.7uF
2.2uF
1uF
5VDC
12VDC
24VDC
-
5VDC
9VDC
12VDC
4.7uF
2.2uF
1uF
-
-
15VDC 0.47uF
26
TO ORDER CALL 1-888-9-AIMTEC
相关型号:
©2020 ICPDF网 联系我们和版权申明