AM20E-4802SC [AIMTEC]
20 watt dc-dc converters; 20瓦特DC-DC转换器型号: | AM20E-4802SC |
厂家: | AIMTEC |
描述: | 20 watt dc-dc converters |
文件: | 总2页 (文件大小:284K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AM20E-C Series
20 watt dc-dc converters
POWER MODULES FOR PCB MOUNTING
SYNCHRONOUS RECTIFIER TOPOLOGY
SURFACE MOUNT TECHNOLOGY
•
•
•
STANDARD 2”x1” PACKAGE AND PINOUT
•
•
REMOTE ON/OFF CONTROL ( OPTIONAL)
GENERAL DESCRIPTION
Our AM20E-C series is a family of cost effective 20W single output
DC-DC converters. These converters are shielded on all six sides and
encapsulated with a nickel-coated copper with a non-conductive base
and dimensions of 50.8x25.4x10.5mm. The high performance features
of ourAM20E-C components include short circuit protection with cur-
rent limit auto recovery, tight line regulation and a high efficiency
operation coefficient up to 88%.
Six models operate from an input voltage range of 24 &
48VDC then converts it into output voltages of 2.5, 3,3 &
5VDC. The normal operation is specified over the full
operating temperature range of -25°C to +71°C with no
derating required. Cooling is done by free air convection.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
Output Specifications:
Voltage accuracy
Ripple
Voltage range
24VDC, 18~36VDC
48 VDC, 36~75VDC
p (Pi) Network
±2%
<0.2% Vout +20mVmax (Vp-p)
<0.5% Vout +50mVmax (Vp-p)
Filter
Noise
Short circuit protection Current limit, auto-recovery
Over current protection Works over 120% of rating
and recovers automatically
Isolation Specifications:
Rated voltage
1500VDC
>1000 Mohms
1000pF
Resistance
Over voltage protection Zener diode clamp protection
Line regulation (HL-LL) ±0.5%(typ.)
Capacitance
Load regulation (10-100%) ±1%(typ.)
Temperature coefficient ±0.02%/°C
General Specifications:
Efficiency
Switching frequency
85% to 88%
400KHz, typ. 100% load
Physical Specifications:
Dimensions
50.8x25.4x10.5mm,
2.0x1.0x0.413inches
32g
Nickel-Coated Copper
with Non-Conductive base,
six sides’ shielded
Environmental Specifications:
Operating temperature
Storage temperature
Case temperature
Humidity (non-condensing)
Cooling
-25°C …+71°C
-55°C …+105°C
+95°C, max.
Up to 95%
Free-air convection
Weight
Case material
MTBF: > 550,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
Specifications are subject to change without notification
82
Continued on next page
TO ORDER CALL 1-888-9-AIMTEC
AM20E-C Series
OUTLINE DIMENSIONS
& PIN CONNECTIONS
MECHANICAL DIMENSION (Top View)
Pin
Single
1
2
3
4
5
6
On/Off Control (Optional)
-V Input
+V Input
-V Iutput
No pin
+V Output
DERATING
BLOCK DIAGRAM
MODELS
Single output
Models
Input Voltage
Ouput Voltage
Ouput Current max.
AM20E-2402SC
AM20E-2403SC
AM20E-2405SC
AM20E-4802SC
AM20E-4803SC
AM20E-4805SC
2.5VDC
3.3VDC
5VDC
2.5VDC
3.3VDC
5VDC
5000mA
4250mA
4000mA
5000mA
4250mA
4000mA
18VDC-36VDC
36VDC-75VDC
83
VISIT US AT WWW.AIMTEC.CA
相关型号:
©2020 ICPDF网 联系我们和版权申明