AM5TW-4805D-N [AIMTEC]
5 watt dc-dc converters; 5瓦特DC-DC转换器型号: | AM5TW-4805D-N |
厂家: | AIMTEC |
描述: | 5 watt dc-dc converters |
文件: | 总3页 (文件大小:310K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AM5TW-N Series
5 watt dc-dc converters
Picture
Available
Soon
24 PIN DIP PACKAGE
INPUT/OUTPUT ISOLATION OF 1500VDC
•
•
•
•
•
•
•
•
WIDE 4:1 INPUT RANGE
HIGH EFFICIENCY UP TO 85%
SHIELDED METAL PACKAGE
OPERATING TEMPERATURE: -40°C ... +71°C
CONTINUOUS SHORT CIRCUIT PROTECTION
PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS
GENERAL DESCRIPTION
Our AM5TW-N series is a family of cost effective 5W
single and dual output DC/DC converters. These
converters combine a shielded metal package in a
24-pin DIP compatible case and includes high per-
formance features such as a 1500VDC input/output
isolation voltage, continuous short circuit protection
and a tight line / load regulation. Wide range devices
operate over a 4:1 input voltage range continuously
providing a stable output voltage.
18 models operate from input voltages of 24 and
48VDC with output voltages of 3.3, 5, 12, 15, 24, ±5,
±12, ±15 & ±24VDC. High performance features
include high efficiency operation up to 85% and output
voltage accuracy of ±1%. All models are packaged in a
low profile 31.75 x 20.32 x 10.16mm case. Operation
is specified over the full operating temperature range of
-40°C to +71°C with no derating required. Cooling is
by free-air convection.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
General Specifications:
Efficiency
Voltage range
24VDC, 9~36VDC
48VDC, 18~72VDC
p(Pi) Network
75% to 85%
Switching frequency (Single)
Switching frequency (Dual)
300KHz, typ., 100% load
250KHz, typ., 100% load
Filter
Output Specifications:
Voltage accuracy (Single)
Voltage accuracy (Dual)
Ripple
Noise (at 20MHz BW)
Short circuit protection
Line voltage regulation
Load voltage regulation
Temperature coefficient
±1%, typ.
±1% p. & ±3% n., typ.
30m Vp-p, typ.
100mVp-p, typ.
Continuous
Isolation Specifications:
Rated voltage (60 sec)
Resistance
1500VDC
> 1000MOhm
80pF, typ.
Capacitance
±0.2%, max.
±0.5%, max.
Environmental Specifications:
Operating temperature (ambient) -40°C ... +71°C
±0.02%/°C, typ.
Storage temperature
Case Temperature
Derating
Humidity (non-condensing)
Cooling
-55°C ... +125°C
+100°C, max.
None required
Up to 95%
Physical Specifications:
Dimensions
31.75x20.32x10.16mm
1.25x0.80x0.40inches
26g
Weight
Case material
Free-air Convection
Metal
MTBF: > 1,000,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25°C)
Specifications are subject to change without notification.
Continued on next page
TO ORDER CALL 1-888-9-AIMTEC
AM5TW-N Series
MODELS
Single Output
Models
Input Voltage
Output Voltage
Max. Output Current
3.3VDC
5VDC
12VDC
15VDC
24VDC
3.3VDC
5VDC
12VDC
15VDC
24VDC
AM5TW-2403S-N
AM5TW-2405S-N
AM5TW-2412S-N
AM5TW-2415S-N
AM5TW-2424S-N
AM5TW-4803S-N
AM5TW-4805S-N
AM5TW-4812S-N
AM5TW-4815S-N
AM5TW-4824S-N
1200mA
1000mA
420mA
330mA
200mA
1200mA
1000mA
420mA
330mA
200mA
9 - 36VDC
18 - 72VDC
MODELS
Dual Output
Models
Input Voltage
Output Voltage
Max. Output Current
AM5TW-2405D-N
AM5TW-2412D-N
AM5TW-2415D-N
AM5TW-2424D-N
AM5TW-4805D-N
AM5TW-4812D-N
AM5TW-4815D-N
AM5TW-4824D-N
±5VDC
±12VDC
±15VDC
±24VDC
±5VDC
±12VDC
±15VDC
±24VDC
±500mA
±210mA
±165mA
±100mA
±500mA
±210mA
±165mA
±100mA
9 - 36VDC
18 - 72VDC
OUTLINE DIMENSIONS & PIN CONNECTIONS
Pin
Single
Dual
1
2
3
Omitted
-V Input
-V Input
Omitted
Omitted
N.C.
Omitted
+V Output
Omitted
-V Output
+V Input
+V Input
Omitted
Omitted
-V Input
-V Input
Common
Omitted
-V Output
Omitted
+V Output
Omitted
Common
+V Input
+V Input
Omitted
9
10
11
12/13
14
15
16
22
23
24
Note: All Pins on a 2.54mm pitch; All Pin diameters are 0.50 mm (Tolerance:±0.25);
All dimensions in mm.
Continued on next page
TO ORDER CALL 1-888-9-AIMTEC
AM5TW-N Series
TYPICAL
CHARACTERISTICS
APPLICATION NOTE
Recommended Circuit
All of our AM5TW-N Series have been tested according to the following
recommended testing circuit before leaving our factory. This series should be
tested under load & never be tested under no load (See Figure 1).
Figure 1 - Single Output
Figure 1 - Dual Output
If you want to further decrease the input/output ripple, you can increase
capacitance properly or choose capacitors with a low ESR. However, the
capacitance should not be too high.(See table 1).
Input Current
When it is used in an unregulated power supply, be sure that the fluctuating
range of the power supply and the rippled voltage do not exceed the module
standard. Input current of power supply should afford the startup current of
this kind of DC/DC module. (See figure 2)
External Capacitor
Although this series of DC/DC converters can work without an external
capacitor, it is highly recommended to use one in order to keep an optimum
performance. (See Table 1)
Figure 2 - Single & Dual Outputs
Requirement on Output Load
To ensure this module operate efficiently and reliably, a minimum load is
specified for this kind of DC/DC converter in addition to a maximum load
(namely full load). During operation, make sure the specified range of input
voltage is not exceeded, the minimum out put load is not less than 10% Of
the full load, and that this product should never be operated under no load!!!
If the actual load is less below the specified minimum load, the output ripple
of this type of DC/DC converter will increase drastically and at the same time
efficiency & reliability of the circuit will decrease deeply .If the actual output
power from the load in your circuit is very small, please connect a resistor
with proper resistance at the output end in parallel to increase the load, or
use our company’s other products with a lower rated output power.
External Capacitor Table
Single & Dual Outputs
Vin
Cin
Vout
Cout
24V
100uF
5V
48V
100uF
12V
15V
24V
100uF each
1A Current
-
-
-
-
TO ORDER CALL 1-888-9-AIMTEC
相关型号:
©2020 ICPDF网 联系我们和版权申明