AMEPR15D-15100AZ-110W [AIMTEC]
up to 1A | AC-DC LED Driver;
| 型号： | AMEPR15D-15100AZ-110W |
| 厂家： | 
AIMTEC |
| 描述： | up to 1A | AC-DC LED Driver |
| 文件： | 总5页 (文件大小：317K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Click on Series name for product info on aimtec.com
Series AMEPR15D-AZ
up to 1A | AC-DC LED Driver
TURES:
-DC Constant Current LED Driver
ut range 90-264VAC/47-440Hz
h Efficiency up to 82%
erating temperature -20 to 80°C
al Harmonic Distortion < 20%
ear Limited Warranty
Leading or Trailing Edge Triac
IP20 or IP67 Case
Active PFC with TRIAC Dimmable
SCP, Over Load Protection
②
No Load
Output
Voltage
(V max.)
Max
Output
Voltage
Range
(V)
Efficiency
Output
Power
Output
Current (A)
Input Voltage
(VAC/Hz)
(%)
Model
115
230
①
VAC
VAC
(W)
②
②
②
②
AMEPR15D-5030AZ+Suffix
AMEPR15D-4835AZ+Suffix
AMEPR15D-3650AZ+Suffix
AMEPR15D-2470AZ+Suffix
15
15.8
18
36-50
62
62
52
34
23
0.3
0.35
0.5
0.7
1
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
82
82
81
81
80
82
82
82
82
79
30-48
24-36
16.8
15
12-24
8-15
②
AMEPR15D-15100AZ+Suffix
①
Exceeding the maximum output power will permanently damage the converter.
②
Model Nomenclature for Ordering:
Add Suffix “-UD”
Universal AC input 90-264VAC, (no TRIAC dimming option), IP20
Universal AC input 90-264VAC, (no TRIAC dimming option), IP67
AC input 90-135VAC, IP20, 115VAC typical value
AC input 90-135VAC, IP67, 115VAC typical value
AC input 180-264VAC, IP20, 230VAC typical value
Add Suffix “-UW”
Add Suffix “-110D”
Add Suffix “-110W”
Add Suffix “-220D”
Add Suffix “-220W”
AC input 180-264VAC, IP67, 230VAC typical value
NOTE: Aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25°C,
humidity<75%, nominal input voltage (115/230VAC) and at rated output load unless otherwise specified. See http://www.aimtec.com/terms-
sale
AMEPR15D-AZ’s AC/DC LED drivers have electrical safeguards designed within to protect it from conventional electrical abnormalities with
the levels listed in the safety table. Applications for use within rural agricultural, heavy industrial, and other areas or regions which are
prone to ‘dirty’ electrical conditions which would subject any of the above models to excessive voltages surges or spikes, may damage or
cause early life failure of product. In this case consideration should be made by the end user to ensure that adequate line or mains surge
suppression is installed in front of Aimtec device to ensure the longevity of the products. Failure to identify excessive line surges violations
prior to installation may damage sensitive equipment permanently.
Input Specifications
Parameters
Inrush current <2ms (cold start)
Leakage current
Conditions
115VAC
230VAC
Typical
Maximum
Units
A
15
25
25
mA
mA
115VAC
230VAC
115VAC
400
250
0.9
AC current
Power Factor
230VAC
0.9
Recommend Slow
Blown Type
External fuse
Start up time
1
A
200
ms
www.aimtec.com
F 052.1e R3.R
Tel: +1 514 620 2722
1 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMEPR15D-AZ
up to 1A | AC-DC LED Driver
Output Specifications
Parameters
Current accuracy
Line regulation
Conditions
Typical
Maximum
Units
%
%
%
V p-p
ms
±7
±10
±7
3
LL-HL
0-100% load
Load regulation
Ripple & Noise
③
Hold-up time
1
Minimum load voltage
See the models table
③ꢀRipple and Noise are measured at 20MHz bandwidth by using a 0.1μF (M/C) or (C/C) and 47µF (E/C) parallel capacitor.
Isolation Specifications
Parameters
Conditions
Typical
Maximum
Units
VAC
MΩ
Tested I/O voltage
Isolation resistance
3sec
3000
>1000
General Specifications
Parameters
Switching frequency
Over load protection
Over voltage protection
Short circuit protection
Short circuit restart
Conditions
Typical
65
110
Maximum
Units
KHz
%
110
Auto recovery
%
Over temperature protection
>105°C
With derating over 55°C
(for IP67 case)
oC
Operating temperature
-20 to +80
Maximum case temperature
Storage temperature
Temperature coefficient
Cooling
Humidity
Case material
100
95
oC
oC
% / oC
-40 to +95
±0.02
Free air convection
% RH
g
Plastic
Wires
UL1015 Input 18AWG*10CM / Output 20 AWG*10CM
IP20 160
Weight
IP67 200
Dimensions (L X H X W)
MTBF
133 x 33 x 30mm (5.24 x 1.30 x 1.18 inch)
>400,000 hrs (MIL-HDBK-217F at t=+25°C)
Environment Approval
Test
Parameters
Conditions
Wave form
Half sine wave
Acceleration amplitude
Bump duration
Converter operation
Number of bumps
Test mode
Displacement
Acceleration
Converter operation
5gn
30 ms
Shock
Before and after test, body mounted (on chassis)
18 (3 in each direction for every axis)
Sweep sine, 10-100Hz, speed 0.05Hz/s
1 mm
3g, 3 loops 30min one cycle, 3h total, every axis tested
Before and after test, body mounted (on chassis)
Vibration
www.aimtec.com
F 052.1e R3.R
Tel: +1 514 620 2722
2 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMEPR15D-AZ
up to 1A | AC-DC LED Driver
Safety Specifications
Parameters
Agency approvals
cULus, CE, FCC
EN61347-1, EN61347-2-13, IEC62384, UL8750, UL60950-1, EN55015, EN55024, FCC Part 15 Subpart B, Class
B, ANSI C63.4 :2003
Harmonic Current Emissions
Voltage fluctuations and flicker
IEC/EN 61000-3-2, Class C
IEC/EN 61000-3-3, (EN60555-3)
IEC 61000-4-2 Level 3
IEC 61000-4-3 Level 2
IEC 61000-4-4 Level 2
IEC 61000-4-5 Level 1
IEC 61000-4-6 Level 2
IEC 61000-4-8 Level 2
IEC 61000-4-11
Electrostatic Discharge Immunity
RF, Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
Surge Immunity
RF, Conducted Disturbance Immunity
Power frequency Magnetic Field Immunity
Voltage dips, Short Interruptions Immunity
Standards
Dimensions
Free Air Convection
Safe Operating Area
Temperature graph
º C
55
100
80
60
40
20
0
- 25 - 20
0
20
40
60
80
º C
100
Ambient Temperature
www.aimtec.com
F 052.1e R3.R
Tel: +1 514 620 2722
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
3 of 5
Series AMEPR15D-AZ
up to 1A | AC-DC LED Driver
Triac Dimming Feature
Triac Device
LED Lighting
Application
LED Driver
Aimtec
AC
Red (+)
Black (‐)
Line (Brown)
Neutral (Blue)
Earth
Ground
Triac Dimming Notes:
A‐ The triac device can be installed on either Line or Neutral
B‐ Aimtec LED drivers have been designed to function with a wide
range of available Triac devices, however the following list of Triac
devices have been tested.
1) Company: LUTRON
Series: SKYLARK
Model: SF‐10P‐WH (input voltage: 120Vac)
Model: SF‐12P‐277‐WH (input voltage 277Vac)
2) Company LUTRON
Series: DIVA
Model: DVF‐103P‐WH (input voltage: 120Vac)
Model: DVF‐103P‐277‐WH (input voltage: 277Vac)
3) Company BERKER
Model: 2867 10 (input voltage:230Vac)
If the power voltage range is 90~135Vac, triac suggested use model
SF‐10P‐WH or DVF‐103P‐WH.
If the power voltage range is 180~260Vac, triac suggested use
model SF‐12P‐277‐WH or DVF‐103P‐277‐WH.
www.aimtec.com
F 052.1e R3.R
Tel: +1 514 620 2722
4 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMEPR15D-AZ
up to 1A | AC-DC LED Driver
Triac Dimming Performance
AMEPR15D-2470AZ
Triac dimming performance is typical as with other models, for specific details on other model
performance, please see the Aimtec Triac Dimming Application note at www.aimtec.com
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified.5..Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 5. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet.
www.aimtec.com
F 052.1e R3.R
Tel: +1 514 620 2722
5 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
相关型号：
©2020 ICPDF网 联系我们和版权申明