AMEPR30D-24125AZ [AIMTEC]
up to 2A | AC-DC / DC-DC LED driver; 高达2A | AC-DC / DC-DC LED驱动器
| 型号： | AMEPR30D-24125AZ |
| 厂家： | 
AIMTEC |
| 描述： | up to 2A | AC-DC / DC-DC LED driver |
| 文件： | 总5页 (文件大小：519K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Series AMEPR30D-AZ
up to 2A | AC-DC / DC-DC LED driver
EATURES:
AC-DC or DC-DC Constant current LED Driver
Input range 90-264VAC/47-440Hz
Active PFC with TRIAC dimmable
Operating temperature -20 to 80°C
Total Harmonic Distortion < 20%
•
•
•
•
•
Over Temperature Protection
IP67 Case
High Efficiency up to 84%
SCP, Over Load Protection
Leading or Trailing Edge Triac
②
Models
Single output
Max
Output
Power
No Load
Output
Voltage
(V max.)
Output
Voltage
Range (V)
Output
Current
(A)
Input
Voltage
(VDC)
Input Voltage
Efficiency
Model
(VAC/Hz)
(%)
①
(W)
AMEPR30D-5070AZ+Suffix
AMEPR30D-4270AZ+Suffix
AMEPR30D-3670AZ+Suffix
AMEPR30D-36100AZ+Suffix
AMEPR30D-24125AZ+Suffix
AMEPR30D-24140AZ+Suffix
AMEPR30D-15200AZ+Suffix
②
②
②
35
29.4
25.2
36
36-50
32-42
24-36
24-36
12-24
12-24
8-15
64
54
52
52
34
34
23
0.7
0.7
0.7
1
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
90-264/47-440
120-370
120-370
120-370
120-370
120-370
120-370
120-370
85
84
83
84
82
83
81
②
②
②
②
30
1.25
1.4
2
33.6
30
①
Exceeding the maximum output power will permanently damage the converter
②
Model Nomenclature for Ordering:
Add Suffix “-U”
Add Suffix “-110”
Add Suffix “-220”
Universal AC input 90-264VAC(no TRIAC dimming with this option)
AC input 90-135VAC,
AC input 180-264VAC
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Input Specifications
Parameters
Conditions
115VAC
230VAC
115VAC
230VAC
115VAC
230VAC
115VAC
230VAC
Typical
10
Maximum
Units
Inrush current <2ms
A
20
0.2
0.25
0.35
0.15
Leakage current
AC current
mA
A
0.9
0.9
Power Factor
External fuse
Start up time
250V/1A
200
ms
Output Specifications
Parameters
Current accuracy
Line regulation
Conditions
Typical
Maximum
Units
%
%
%
V p-p
ms
±5
±7
±5
1-3
1
LL-HL
0-100% load
20MHz Bandwidth
Load regulation
Ripple & Noise
③
Hold-up time
Minimum Load Voltage
See the models table
③
Tested with 0.1µF (M/C) or (C/C) and 47µF (E/C) parallel capacitors at the end.
www.aimtec.com
F 052.1e R3.G
Tel: +1 514 620 2722
1 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMEPR30D-AZ
up to 2A | AC-DC / DC-DC LED driver
Isolation Specifications
Parameters
Tested I/O voltage
Conditions
Typical
Maximum
Units
VAC
MΩ
3sec
3000
Isolation Resistance
>1000
General Specifications
Parameters
Switching frequency
Over load protection
Over voltage protection
Short circuit protection
Short circuit restart
Over temperature protection
Operating temperature
Maximum case temperature
Storage temperature
Temperature coefficient
Cooling
Conditions
Typical
Maximum
Units
KHz
65
110% of Iout
110% of Vout
Continuous
Auto recovery
>105°C
With derating over 55°C
-20 to +80
oC
oC
100
95
-40 to +95
±0.02
Free air convection
oC
% / oC
Humidity
Case material
Wires
Weight
% RH
g
Plastic
UL1015 20AWG * 10CM
200
Dimensions (L X H X W)
MTBF
133x33x30mm (5.24 x 1.30 x 1.18 inch)
>400,000 hrs (MIL-HDBK-217F at +25°C)
Environment Approval
Test
Parameters
Conditions
Wave form
Half sine wave
Acceleration amplitude
Bump duration
Converter operation
Number of bumps
Test mode
Displacement
Acceleration
Converter operation
5gn
30 ms
Shock
Before and after test, body mounted (on chassis)
18 (3 in each direction for every axis)
Sweep sine, 10-100Hz, speed 0.05Hz/s
1 mm
3g, 3 loops 30min one cycle, 3h total, every axis tested
Before and after test, body mounted (on chassis)
Vibration
Safety Specifications
Parameters
Agency approvals
cULus, CE, FCC
Standards
EN61347-1, EN61347-2-13, IEC62384, UL8750, UL60950-1, EN55015, EN55024
Radiated and Conducted Emission
EMI - Conducted and radiated emission
Harmonic Current Emissions
FCC Part 15 Subpart B, Class B, ANSI C63.4 :2003
EN 55022
IEC/EN 61000-3-2, (EN60555-2)
IEC/EN 61000-3-3, (EN60555-3)
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
Voltage fluctuations and flicker
Electrostatic Discharge Immunity
RF, Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
Surge Immunity
Standards
RF, Conducted Disturbance Immunity
Power frequency Magnetic Field Immunity
Voltage dips, Short Interruptions Immunity
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
www.aimtec.com
F 052.1e R3.G
Tel: +1 514 620 2722
2 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMEPR30D-AZ
up to 2A | AC-DC / DC-DC LED driver
Dimensions
Temperature Graph
Free Air Convection
º C
55
100
80
60
40
20
0
Safe Operating Area
- 25 - 20
0
20
40
60
80
º C
100
Ambient Temperature
www.aimtec.com
F 052.1e R3.G
Tel: +1 514 620 2722
3 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMEPR30D-AZ
up to 2A | AC-DC / DC-DC LED driver
Triac Dimming Feature
Triac Device
LED Lighting
Application
LED Driver
Aimtec
AC
Red (+)
Line (Brown)
Neutral (Blue)
Black (-)
Earth
Ground
Triac Dimming Notes:
A- The triac device can be installed on either Line or Neutral
B- Aimtec LED drivers have been designed to function with a wide
range of available Triac devices, however the following list of Triac
devices have been tested and are recommended by Aimtec.
1) Company: LUTRON
Series: SKYLARK
Model: SF-10P-WH (input voltage: 120Vac)
Model: SF-12P-277-WH (input voltage 277Vac)
2) Company LUTRON
Series: DIVA
Model: DVF-103P-WH (input voltage: 120Vac)
Model: DVF-103P-277-WH (input voltage: 277Vac)
3) Company BERKER
Model: 2867 10 (input voltage:230Vac)
If the power voltage range is 90~135Vac, triac suggested use model
SF-10P-WH or DVF-103P-WH.
If the power voltage range is 180~260Vac, triac suggested use
model SF-12P-277-WH or DVF-103P-277-WH.
www.aimtec.com
F 052.1e R3.G
Tel: +1 514 620 2722
4 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMEPR30D-AZ
up to 2A | AC-DC / DC-DC LED driver
Triac Dimming Performance
AMEPR30D-3670AZ
Triac dimming performance is typical as with other models, for specific details on other model
performance, please see the Aimtec Triac Dimming Application note at www.aimtec.com
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified.5..Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 5. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet.
www.aimtec.com
F 052.1e R3.G
Tel: +1 514 620 2722
5 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
相关型号：
©2020 ICPDF网 联系我们和版权申明