AMFW72-0.41NZ-ST [AIMTEC]
Single Phase EMI Filter;型号: | AMFW72-0.41NZ-ST |
厂家: | AIMTEC |
描述: | Single Phase EMI Filter LTE |
文件: | 总6页 (文件大小:412K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AMFW72-NZ
Preliminary
Click to
ORDER
AMFW72-NZ
samples
The AMFW72-NZ series of EMC filters are designed for railway and industrial
applications. They offer an input voltage range of 40-160VDC with an efficiency of
98%.
The AMFW72-NZ series can aid in compliance to EN50155 for railway and
IEC/EN61000-2 and CISPR32/EN55032 industrial standards. This EMC filter has an
operating temperature range of -40 to +85°C. It is PCB mountable and available in
optional chassis and DIN-rail mounting plate options.
Picture is coming soon
2x1”
Features
Summary
AMFW72-NZ
•
•
•
•
•
•
Ultra-Wide Input: 40 - 160VDC
Operating Temp: -40 °C to +85 °C
High Isolation Voltage Up To 2000VAC
Input Reverse Voltage Protection
EMI Meet EN55032 Class B
160
100
Passive
85
50
EMS Meet IEC 61000-4
Active
10
3
40
-40
Input voltage
(VDC)
Type
Max output power
(W)
Temp. range
(℃)
Applications
Training
Press Release
Coming Soon!
Industrial
Telecom
Instrumentation
Power Grid
Application Notes
Product Training Video
(click to open)
F 052e R4
REV: 07/19/A
www.Aimtec.com
1
AMFW72-NZ
Preliminary
Models & Specifications
Models
Input Voltage
Max output power
Model
(VDC)
(W)
AMFW72-13NZ
AMFW72-0.41NZ
AMFW72-0.69NZ
40 ~ 160
40 ~ 160
40 ~ 160
10
30
50
Note: Use suffix “ST” for chassis and suffix “STD” for DIN-Rail mounting (ex. AMFW72-0.69NZ-ST is chassis mounting and AMFW72-0.69NZ-STD is
DIN-Rail mounting version). The optional -ST, -STD mounting plate are for models AMFW72-0.41NZ and AMFW72-0.69NZ only.
Input Specifications
Parameters
Input Voltage
Tested Conditions
Typical
Maximum
Units
110
160
3
1
VDC
mA
110VDC, AMFW72-0.69NZ
110VDC, Others
No-load Current
Output Specifications
Parameters
Tested Conditions
Typical
Maximum
Units
Max Output Voltage Limit
Input voltage is not more than 175V
165
VDC
NOTE: Continuous operation of the filters at their Max. Output voltage Limit may cause failures or permanent damage.
General Specifications
Parameters
Efficiency
Operating temperature
Storage temperature
Case temperature rise
Isolation Voltage
Conditions
Typical
Maximum
Units
110VDC, Full load
98
%
oC
oC
oC
-40 to +85
-55 to +125
110VDC, Full load
+25
AMFW72-0.69NZ
Others
2000
1500
95
1 min, < 5mA leakage current
VAC
(+Vin / GND ; -Vin / GND)
Humidity
%RH
Case material
Heat resistant black Plastic (flammability to UL 94V-0)
PCB mountable model
AMFW72-13NZ
30
PCB mountable models
Optional -ST mounting plate
Optional -STD mounting plate
50
70
90
Weight
g
Others
PCB mountable model
AMFW72-13NZ
Others
2.00 x 1.00 x 0.60 inches (50.80 x 25.40 x 15.16mm)
PCB mountable models
Optional -ST mounting plate
Optional -STD mounting plate
Each axis 10 cycles for 3 min
2.12 x 1.13 x 0.75 inches (53.80 x 28.80 x 19.00mm)
2.99 x 1.24 x 1.09 inches (76.00 x 31.50 x 27.80mm)
2.99 x 1.24 x 1.28 inches (76.00 x 31.50 x 32.40mm)
Dimensions (L x W x H)
Vibration
Frequency : 5 to 150Hz ; Amplitude : 7.5mm
Acceleration : 10g
IEC/EN61373
F 052e R4
REV: 07/19/A
www.Aimtec.com
2
AMFW72-NZ
Preliminary
MTBF
>1,200,000 hrs (MIL-HDBK -217F, t=+40oC)
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated
output load unless otherwise specified.
Safety Specifications
Parameters
EMI - Conducted and radiated emission
Electrostatic Discharge Immunity
RF, Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
Surge Immunity
CISPR32 / EN55032, class B
IEC 61000-4-2 Contact ±6KV / Air ±8KV, Criteria B
IEC 61000-4-3 10V/m, Criteria A
IEC 61000-4-4 ±4KV, Criteria B
IEC 61000-4-5 ±2KV(2Ω internal) / ±4KV(12Ω internal), Criteria B
IEC 61000-4-6 10Vr.m.s, Criteria A
Standards
RF, Conducted Disturbance Immunity
Dimensions
AMFW72-13NZ
50.80
(2.00)
45.72
(1.80)
Pin Output Specifications
1
2
3
3
4
5
Pin
1
2
3
4
Single
GND
-V Input
+V Input
+V Output
-V Output
5
4
Bottom View
2
1
Ø1.50
(Ø0.06)
5
Dimensions mm (inch)
Pin diameter tolerance ±0.1 (±0.004)
Pin height tolerance ±0.5 (±0.02)
Front View
1.00
(0.04)
F 052e R4
REV: 07/19/A
www.Aimtec.com
3
AMFW72-NZ
Preliminary
AMFW72-0.41NZ & AMFW72-0.69NZ
53.80
(2.12)
45.72
(1.80)
Pin Output Specifications
1
2
3
Pin
1
2
3
4
Single
GND
-V Input
+V Input
+V Output
-V Output
3
2
1
4
5
5
4
Bottom View
Ø1.50
(Ø0.06)
5
Dimensions mm (inch).
Pin diameter tolerance ±0.1 (±0.004)
Pin height tolerance ±0.5 (±0.02)
Front View
1.00
(0.04)
Dimensions with ST Optional
AMFW72-0.41NZ & AMFW72-0.69NZ
76.00
(2.99)
61.60
(2.43)
Ø3.30
Pin Output Specifications
Pin
1
2
3
4
Single
GND
-V Input
+V Input
+V Output
-V Output
1
5
4
2
Top View
3
5
Ø3.30
(Ø0.13)
Front View
Dimensions mm (inch)
Wire range: 24-12 AWG
General tolerances ±0.50 (±0.02)
F 052e R4
REV: 07/19/A
www.Aimtec.com
4
AMFW72-NZ
Preliminary
Dimensions with STD Optional
AMFW72-0.41NZ & AMFW72-0.69NZ
76.00
(2.99)
61.60
(2.43)
Pin Output Specifications
Pin
1
2
3
4
Single
GND
-V Input
+V Input
+V Output
-V Output
1
2
5
4
Top View
3
5
Front View
Dimensions mm (inch)
Wire range: 24-12 AWG
General tolerances: ±0.50 (±0.02)
Application Circuit
CY1
Fuse
+V input
+V output
-V output
+V input
+V output
+
C1
DC EMC Filter
DC-DC Converter
-V output
-V input
-V input
GND
CY2
Model
Recommended external circuit parameters
AMFW72-0.69NZ
Others
200uF/400V electrolytic capacitor in parallel
100uF/200V electrolytic capacitor
C1
CY1 / CY2
Fuse
1nF/2KV
The fuse value varies with different power modules and must be selected in accordance with the
specified input current of the corresponding power converter, but not exceeding the filter specifications.
F 052e R4
REV: 07/19/A
www.Aimtec.com
5
AMFW72-NZ
Preliminary
Fuse
+V input
+V output
-V output
+V input
+V output
+
C1
DC EMC Filter
DC-DC Converter
-V output
-V input
-V input
GND
X
Fuse
+V input
+V output
-V output
+V input
+V output
+
C1
DC EMC Filter
DC-DC Converter
-V output
-V input
-V input
GND
X
Fuse
+V input
+V output
-V output
+V input
+V output
+
C1
DC EMC Filter
DC-DC Converter
-V output
-V input
-V input
GND
X
CY1
Note: Connections marked with X interfere with this filter modules performance and should therefore not
be used
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to
www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical
drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless
otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and
other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous
environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with
Aimtec’s standard Terms of Sale available at www.aimtec.com.
F 052e R4
REV: 07/19/A
www.Aimtec.com
6
相关型号:
©2020 ICPDF网 联系我们和版权申明