A6120DR-50 [AITSEMI]
LOW DROPOUT VOLTAGE REGULATOR;型号: | A6120DR-50 |
厂家: | AiT Semiconductor |
描述: | LOW DROPOUT VOLTAGE REGULATOR |
文件: | 总11页 (文件大小:548K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
A6120
AiT Semiconductor Inc.
www.ait-ic.com
LOW DROPOUT VOLTAGE REGULATOR
2A LOW CONSUMPTION LINEAR REGULATOR
DESCRIPTION
FEATURES
A6120 is a series of low power consumption, low
dropout voltage regulator with a typical dropout
voltage of 1.0V at 2A load current.
Low Power Consumption:3.0uA (Typ.)
Maximum output current : 2A
Maximum input voltage: 18V
A6120 can provide output value in the range of
1.2V~5.0V in 0.1V steps. It also can customized on
command.
Line regulation: 0.2% (Typical)
Output Voltage Range:1.2V~5.0V (customized
on command in 0.1V steps)
Other than every voltage version can be used as an
adjustable voltage version, with which desired voltage
can be achieved by setting the values of two external
resistors of the application circuitry.
Highly Accurate:±2%(±1% customized)
Typical Dropout Voltage:
850mV@1.5A (VOUT=3.3V)
Operation environment Temperature:
-40°C~85°C
A6120 has well load transient response and good
temperature characteristic, And it uses trimming
technique to guarantee output voltage accuracy
within±2%.
Available in SOT-223 and TO-252 Packages
APPLICATION
Battery Charger
The A6120 is available in SOT-223 and TO-252
Packages.
Battery Powered equipment
Post Regulators for Switching Supplies
Reference Voltage Source Regulation after
Switching Power
ORDERING INFORMATION
Package Type
Part Number
A6120NR-XX
A6120NVR-XX
A6120DR-XX
A6120DVR-XX
SOT-223
TYPICAL APPLICATION
N
D
SPQ: 2,500pcs/Reel
TO-252
SPQ: 2,500pcs/Reel
X: Output Voltage
12=1.2V; 18=1.8V;
25=2.5V; 33=3.3V;
50=5.0V
Note
Fig1. A6120 fixed voltage application circuit
NOTE: Input capacitor (CIN=1uF) and Output
capacitor (COUT=1uF) are recommended in all
V: Halogen free Package
R: Tape & Reel
application
circuit.
ceramic
capacitor
is
AiT provides all RoHS products
recommended.
REV2.2
- DEC 2013 RELEASED, JUL 2017 UPDATED -
- 1 -
A6120
AiT Semiconductor Inc.
www.ait-ic.com
LOW DROPOUT VOLTAGE REGULATOR
2A LOW CONSUMPTION LINEAR REGULATOR
PIN DESCRIPTION
Top View
Top View
Function
Pin #
Symbol
VSS/ADJ
VOUT
1
2
3
VSS/ADJ Pin
Output Pin
Input Pin
VDD
REV2.2
- DEC 2013 RELEASED, JUL 2017 UPDATED -
- 2 -
A6120
AiT Semiconductor Inc.
www.ait-ic.com
LOW DROPOUT VOLTAGE REGULATOR
2A LOW CONSUMPTION LINEAR REGULATOR
ABSOLUTE MAXIMUM RATINGS
Max Input Voltage
20V
125°C
TJ, Operating Junction Temperature
TA, Ambient Temperature
-40°C~85°C
20°C/W
SOT-223
Package Thermal Resistance
TO-252
12°C/W
TS, Storage Temperature
Lead Temperature & Time
-40°C~150°C
260°C, 10 Sec
Stress beyond above listed “Absolute Maximum Ratings” may lead permanent damage to the device. These are stress ratings only and
operations of the device at these or any other conditions beyond those indicated in the operational sections of the specifications are not
implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Parameter
Value
Input Voltage Range
Ambient Temperature
Max. 18V
-40°C~85°C
REV2.2
- DEC 2013 RELEASED, JUL 2017 UPDATED -
- 3 -
A6120
AiT Semiconductor Inc.
www.ait-ic.com
LOW DROPOUT VOLTAGE REGULATOR
2A LOW CONSUMPTION LINEAR REGULATOR
ELECTRICAL CHARACTERISTICS
Test Conditions: CIN=1uF, COUT=1uF, TA=25°C, unless Otherwise Specified
Parameter
Symbol
VDD
Test Condition
Min.
-
Typ.
-
Max.
18
Unit
V
Input Voltage
VOUT
x 0.98
VOUT
x1.02
Output Voltage
VOUT
VOUT
V
VIN-VOUT=1.9V VOUT<1.5V
Maximum Output
Current
IOUT (Max.)
2
-
-
A
VIN--VOUT=1.5V 1.5V≤VOUT<2.0V
VIN--VOUT=1V
VOUT≥2.0V
VOUT <1.5V
1.5V≤VOUT<2.0V
VOUT≥2.0V
-
-
-
1600
1200
850
1800
1400
950
Input-Output
Dropout
Voltage
Voltage Differential
IOUT≤1.5A
mV
NOTE3
ΔVOUT
Line Regulation
IOUT=10mA
Set VOUT+1V≤VIN≤18V
VOUT <1.5V
-
0.1
0.3
%/V
NOTE1
ΔVIN × VOUT
-
-
-
-
40
20
10
3.0
60
40
30
5.0
Load Regulation
ΔVOUT
1mA≤IOUT≤1.5A 1.5V≤VOUT<2.0V
VOUT≥ 2.0V
mV
uA
NOTE1,2
Quiescent Current
Output Voltage
Temperature
Iq
VIN-=Set VOUT+1V
ΔVOUT
IOUT=100mA
-
-
200
-
-
ppm/°C
ΔT × VOUT
Coefficient
Thermal Resistance
Junction to case
SOT-223
TO-252
20
12
θJC
°C / W
NOTE1: Line Regulation and Load Regulation in Table1 are tested under constant junction temperature.
NOTE2: When load current varies between 0~2A and VIN-VOUT ranges from 1V~18V at constant junction temperature, the parameter is
satisfied the criterion in table.
NOTE3: Dropout Voltage is the voltage difference between the input and output pin when the input voltage is minimum to maintain the
lowest spec output voltage.
REV2.2
- DEC 2013 RELEASED, JUL 2017 UPDATED -
- 4 -
A6120
AiT Semiconductor Inc.
www.ait-ic.com
LOW DROPOUT VOLTAGE REGULATOR
2A LOW CONSUMPTION LINEAR REGULATOR
TYPICAL PERFORMANCE CHARACTERISTIC
1.
Load Regulation (VOUT=1.2V)
2.
Load Regulation (VOUT=3.3V)
3.
Load Regulation (VOUT=5.0V)
4.
Line Regulation
5.
Dropout
6.
Iq
REV2.2
- DEC 2013 RELEASED, JUL 2017 UPDATED -
- 5 -
A6120
AiT Semiconductor Inc.
www.ait-ic.com
LOW DROPOUT VOLTAGE REGULATOR
2A LOW CONSUMPTION LINEAR REGULATOR
7.
Line Transient Response
8.
Load Transient Response
VIN=3.3V, IOUT=0.1A to 1A
(Pink: IOUT, Green: VOUT
IOUT=100mA,VIN=3.3V to 4.3V
(Orange: VIN, Green: VOUT
)
)
REV2.2
- DEC 2013 RELEASED, JUL 2017 UPDATED -
- 6 -
A6120
AiT Semiconductor Inc.
www.ait-ic.com
LOW DROPOUT VOLTAGE REGULATOR
2A LOW CONSUMPTION LINEAR REGULATOR
BLOCK DIAGRAM
DETAILED INFORMATION
A6120 is a series of low dropout voltage and low power consumption regulator. Its application circuitry
requires minimum number of external components. Both fixed voltage and adjustable voltage application
circuits need input and output capacitors to assure output voltage stability. Any desired output voltage from
fixed voltage to 18V can be achieved by assigning proper values to two external resistors in its application
circuitry (as shown in Fig.2, as R1, R2 are the two external resistors.).
A6120 uses trimming technique to assure the accuracy of output value within ±2%, at the same time,
temperature compensation is elaborately considered in this chip, which makes A6120’s temperature
coefficient within 100ppm/℃
REV2.2
- DEC 2013 RELEASED, JUL 2017 UPDATED -
- 7 -
A6120
AiT Semiconductor Inc.
www.ait-ic.com
LOW DROPOUT VOLTAGE REGULATOR
2A LOW CONSUMPTION LINEAR REGULATOR
TYPICAL APPLICATION
A6120 has fixed voltage and adjustable voltage application mode.
A 1μF ceramic capacitor connected between input and GND as bypass capacitor and a 1μF ceramic capacitor
between output and GND are recommended for all application.
Using a bypass capacitor (CADJ) between the adjust terminal and ground can improve ripple rejection. The
bypass capacitor prevents ripple from being amplified in case the output voltage is increased. The impedance
of CADJ should be less than the resistance of R1 to prevent ripple from being amplified at any frequency. As R1
is normally in the range of 1kΩ~10kΩ, the value of CADJ should satisfy the following condition:
1/(2π* FrequencyRipple *CADJ)<R1
A 0.1μF ceramic capacitor is recommended.
Fig 2. Typical Application of A6120
EXPLANATION
The output voltage of adjustable application satisfies this followed equation:
VOUT=VREF× (1+R2/R1)+IADJ×R2.
The second term IADJ×R2 can be ignored since the adjustable pin current IADJ (~ 2μA) is much less than the
current through R1 (~1mA).
The value of R1 is preferred in the range of 1kΩ~10kΩ and the value of VREF is the output voltage of typical
fixed voltage application circuit.
REV2.2
- DEC 2013 RELEASED, JUL 2017 UPDATED -
- 8 -
A6120
AiT Semiconductor Inc.
www.ait-ic.com
LOW DROPOUT VOLTAGE REGULATOR
2A LOW CONSUMPTION LINEAR REGULATOR
PACKAGE INFORMATION
Dimension in SOT-223 (Unit: mm)
REV2.2
- DEC 2013 RELEASED, JUL 2017 UPDATED -
- 9 -
A6120
AiT Semiconductor Inc.
www.ait-ic.com
LOW DROPOUT VOLTAGE REGULATOR
2A LOW CONSUMPTION LINEAR REGULATOR
Dimension in TO-252 (Unit: mm)
Symbol
A
Min
Max
2.380
0.100
1.100
0.890
0.860
1.100
5.430
0.600
0.560
0.600
6.200
-
2.200
0.000
0.900
0.770
0.760
0.770
5.230
0.470
0.460
0.470
6.000
5.250
6.500
4.700
A1
A2
b
b1
b2
b3
c
c1
c2
D
D1
E
6.700
-
E1
e
H
L
2.280(BSC)
9.800
1.400
10.40
1.700
L1
L2
L3
L5
L6
θ
2.900(REF)
0.510(BSC)
0.900
1.250
1.500
0.900
1.800(REF)
0°
3°
1°
8°
7°
5°
θ1
θ2
REV2.2
- DEC 2013 RELEASED, JUL 2017 UPDATED -
- 10 -
A6120
AiT Semiconductor Inc.
www.ait-ic.com
LOW DROPOUT VOLTAGE REGULATOR
2A LOW CONSUMPTION LINEAR REGULATOR
IMPORTANT NOTICE
AiT Semiconductor Inc. (AiT) reserves the right to make changes to any its product, specifications, to
discontinue any integrated circuit product or service without notice, and advises its customers to obtain the
latest version of relevant information to verify, before placing orders, that the information being relied on is
current.
AiT Semiconductor Inc.'s integrated circuit products are not designed, intended, authorized, or warranted to
be suitable for use in life support applications, devices or systems or other critical applications. Use of AiT
products in such applications is understood to be fully at the risk of the customer. As used herein may involve
potential risks of death, personal injury, or server property, or environmental damage. In order to minimize
risks associated with the customer's applications, the customer should provide adequate design and
operating safeguards.
AiT Semiconductor Inc. assumes to no liability to customer product design or application support. AiT
warrants the performance of its products of the specifications applicable at the time of sale.
REV2.2
- DEC 2013 RELEASED, JUL 2017 UPDATED -
- 11 -
相关型号:
©2020 ICPDF网 联系我们和版权申明