TK63101SCB-G [AKM]
Fixed Positive LDO Regulator;型号: | TK63101SCB-G |
厂家: | ASAHI KASEI MICROSYSTEMS |
描述: | Fixed Positive LDO Regulator |
文件: | 总32页 (文件大小:824K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
[TK631xxB/H/S]
TK631xxH/S
CMOS LDO Regulator
1-. DESCRIPTION
4-. PIN CONFIGURATION
The TK631xxH/S is a CMOS LDO regulator. The
packages are the small and thin SON2017-6, and the
extremely versatile SOT23-5.
SON2017-6 (TK631xxH)
The IC is designed for portable applications with space
requirements, battery powered system and any electronic
equipment.
The IC does not require a noise-bypass capacitor.
The IC offers high accuracy (±1%) and low dropout
voltage.
VIn
1
VCont
GND
NC
6
5
4
GND
VOut
2
3
The output voltage is internally fixed from 1.5V to 4.2V.
2-. FEATURES
High accuracy (±1%)
(Top View)
SOT23-5 (TK631xxS)
Packages: SON2017-6 / SOT23-5
No noise bypass capacitor required
Low dropout voltage
Thermal and over current protection
High maximum load current
On/Off control
VIn
GND
VCont
1
2
3
5
VOut
3-. APPLICATIONS
Mobile Communication
Battery Powered System
Any Electronic Equipment
4
NC
(Top View)
5-. BLOCK DIAGRAM
VIn
VOut
VRef
CIn
COut
Thermal &
Over Current
Protection
On/Off
Control
VCont
GND
AP-MS0037-E-00
- 1 -
2011/02
[TK631xxB/H/S]
6-. ORDERING INFORMATION
T K 6 3 1
C
Voltage Code
(Refer to the following table)
Solder Composion Code
- G : PB Free
- GH : PB Free & Halogen Free
brank : Lead Containing
Package Code
B : FC-4
H : SON2017-6 Package
S : SOT23-5 Package
Tape/Reel Code
B : Normal type for FC
L : Normal type for plastic packages
Operating Temp. Range Code
C : C Rank(standard) only
Output Voltage
Voltage Code
Output Voltage
Voltage Code
Output Voltage
Voltage Code
1.5V
15
2.8V
28
3.3V
33
1.6V
1.8V
2.5V
2.6V
2.7V
16
18
25
26
27
2.85 V
2.9V
3.0V
3.1V
3.2V
01
29
30
31
32
3.5V
35
*If you need a voltage other than the value listed in the above table, please contact Asahi Kasei Microdevices.
7-. ABSOLUTE MAXIMUM RATINGS
Ta=25C
Parameter
Absolute Maximum Ratings
Input Voltage
Symbol
Rating
Units
Conditions
VIn,MAX
VOut,MAX
VCont,MAX
Tstg
-0.3 ~ 7.0
-0.3 ~ VIn+0.3
-0.3 ~ 7.0
V
V
Output pin Voltage
Control pin Voltage
V
Storage Temperature Range
-55 ~ 150
C
Internal Limited Tj=150°C *,
When mounted on PCB
Power Dissipation
PD
mW
500
SON2017-6 , SOT23-5
Operating Condition
Operational Temperature Range
Operational Voltage Range
TOP
VOP
-40 ~ 85
2.0 ~ 6.0
C
V
* PD must be decreased at the rate of 2.9mW/C (FC-4) or 4mW/C (SON2017-6 , SOT23-5) for operation above 25C.
The maximum ratings are the absolute limitation values with the possibility of the IC breakage.
When the operation exceeds this standard quality can not be guaranteed.
AP-MS0037-E-00
- 2 -
2011/02
[TK631xxB/H/S]
8-. ELECTRICAL CHARACTERISTICS
The parameters with min. or max. values will be guaranteed at Ta=Tj=25C with test when manufacturing or
SQC(Statistical Quality Control) methods. The operation between -40 ~ 85C is guaranteed when design.
VIn=VOut,TYP+1V, VCont=1.3V, Ta=Tj=25°C
Value
TYP
Parameter
Symbol
Units
Conditions
MIN
MAX
Output Voltage
VOut
LinReg
LoaReg
VDrop
V
IOut=5mA
Refer to TABLE 1
Line Regulation
-
0.0
4.0
mV
mV
mV
mA
µA
µA
µA
VIn=1V
Load Regulation
Refer to TABLE 2
Refer to TABLE 2
Refer to TABLE 2
Refer to TABLE 2
VOut=VOut,TYP0.9
IOut=0mA, VCont=VIn
VCont=0V
Dropout Voltage *1
Maximum Load Current *2
Quiescent Current
Standby Current
IOut,MAX
IQ
IStandby
IGND
210
300
80
-
-
-
-
120
0.1
150
0.01
90
GND Pin Current
Control Terminal
Control Current
IOut=50mA, VCont=VIn
ICont
-
1.3
-
2.0
4.0
-
µA
V
VCont=1.3V
-
-
VOut On state
VOut Off state
Control Voltage
VCont
0.25
V
Reference Value
Output Voltage / Temp.
Output Noise Voltage
(TK63128)
-
-
100
40
-
-
ppm/°C IOut=5mA
VOut/Ta
COut=1.0µF , IOut=30mA ,
µVrms
VNoise
BPF=400Hz~80kHz
Ripple Rejection
(TK63128)
COut=1.0µF ,
RR
tr
-
-
70
30
-
-
dB
IOut=10mA , f=1kHz
COut=1.0µF ,
VCont : Pulse Wave (100Hz) ,
VCont On VOut95% point
Rise Time
(TK63128)
µs
*1: For VOut 2.0V , no regulations.
*2: The maximum output current is limited by power dissipation.
General Note
Parameters with only typical values are just reference. (Not guaranteed)
The noise level is dependent on the output voltage, the capacitance and capacitor characteristics.
AP-MS0037-E-00
- 3 -
2011/02
[TK631xxB/H/S]
TABLE 1. Preferred Product
Output Voltage
Part Number
MIN TYP MAX
V
V
V
TK63115H/S
TK63116H/S
TK63118H/S
TK63125H/S
TK63126H/S
TK63127H/S
TK63128H/S
TK63101H/S
TK63129H/S
TK63130H/S
TK63131H/S
TK63132H/S
TK63133H/S
TK63135H/S
1.485 1.500 1.515
1.584 1.600 1.616
1.782 1.800 1.818
2.475 2.500 2.525
2.574 2.600 2.626
2.673 2.700 2.727
2.772 2.800 2.828
2.821 2.850 2.879
2.871 2.900 2.929
2.970 3.000 3.030
3.069 3.100 3.131
3.168 3.200 3.232
3.267 3.300 3.333
3.465 3.500 3.535
Notice.
Please contact your authorized Asahi Kasei Microdevices representative for voltage availability.
AP-MS0037-E-00
- 4 -
2011/02
[TK631xxB/H/S]
TABLE 2. Preferred Product
Load Regulation
IOut=5 ~ 100mA IOut=5 ~ 150mA IOut=5 ~ 200mA IOut=100mA
Dropout Voltage
IOut=150mA
IOut=200mA
Part Number
TYP MAX TYP MAX TYP MAX TYP MAX TYP MAX TYP MAX
mV
9
mV
36
36
36
36
36
36
36
36
36
36
36
36
36
36
mV
15
15
15
15
15
15
15
15
15
15
15
15
15
15
mV
60
60
60
60
60
60
60
60
60
60
60
60
60
60
mV
20
20
20
20
20
20
20
20
20
20
20
20
20
20
mV
80
80
80
80
80
80
80
80
80
80
80
80
80
80
mV
180
160
135
105
105
100
100
95
mV
-
mV
260
240
205
175
170
180
180
180
180
180
180
180
180
180
mV
-
mV
340
320
300
300
300
300
300
300
300
300
300
300
300
300
mV
-
TK63115H/S
TK63116H/S
TK63118H/S
TK63125H/S
TK63126H/S
TK63127H/S
TK63128H/S
TK63101H/S
TK63129H/S
TK63130H/S
TK63131H/S
TK63132H/S
TK63133H/S
TK63135H/S
9
-
-
-
9
-
-
-
9
160
155
150
145
140
140
140
140
140
140
140
260
255
265
265
265
265
265
265
265
265
265
420
420
420
420
420
420
420
420
420
420
420
9
9
9
9
9
95
9
95
9
95
9
95
9
95
9
95
AP-MS0037-E-00
- 5 -
2011/02
[TK631xxB/H/S]
9-. TEST CIRCUIT
Test circuit for electrical characteristic
IIn
_
CIn
=1.0uF
A
VIn
VOut
VCont GND
ICont
VCont
Notice.
COut
=1.0uF
The limit value of electrical characteristics is applied when
CIn=1.0F(Ceramic), COut=1.0F(Ceramic).
But CIn, and COut can be used with both ceramic and
tantalum capacitors.
_
V
VIn=
VOut,TYP+1.0V
IOut
=5mA
VOut
_
A
VIn
VOut
VCont GND
ICont
VCont
VOut vs VIn
VDrop vs IOut
VOut vs IOut
VOut vs IOut
VOut vs Ta
VDrop vs Ta
CIn
=1.0uF
COut
=1.0uF
_
V
VIn
IOut
VOut
_
A
IOut,MAX vs Ta
ICont vs VCont , VOut vs VCont
ICont vs Ta
VCont vs Ta
VNoise vs VIn
VNoise vs IOut
VNoise vs VOut
VNoise vs Frequency
IIn
_
CIn
=1.0uF
A
VIn
VOut
VCont GND
ICont
VCont
IQ vs VIn
IStandby vs VIn
IQ vs Ta
Open
COut
=1.0uF
VIn=
VOut,TYP+1.0V
_
A
VIn
VOut
VCont GND
ICont IGND
VCont
IGND vs IOut
IGND vs Ta
CIn
=1.0uF
COut
=1.0uF
VIn=
IOut
_
A
_
A
VOut,TYP+1.0V
AP-MS0037-E-00
- 6 -
2011/02
[TK631xxB/H/S]
VIn=
VOut,TYP+1.5V
VIn
VOut
RR vs VIn
RR vs Frequency
RR vs Frequency
Vripple
500mVP-P
=
COut
=1.0uF
VCont GND
IOut
=10mA
VCont
=1.3V
VOut,TYP+2V
VIn
VOut
Line Transient
Load Transient
On/Off Transient
COut
=1.0uF
VOut,TYP+1V
VCont GND
_
V
IOut
=5mA
VOut
VOut
VOut
VCont
=1.3V
VIn
VOut
CIn
=1.0uF
COut
=1.0uF
VCont GND
_
V
VIn=
VOut,TYP+1.0V
IOut
VCont
=1.3V
VIn
VOut
CIn
=1.0uF
COut
=1.0uF
VCont GND
_
V
VIn=
VOut,TYP+1.0V
IOut
=5mA
VCont
=0V 1.3V
AP-MS0037-E-00
- 7 -
2011/02
[TK631xxB/H/S]
10-. TYPICAL CHARACTERISTICS
10-1-. DC CHARACTERISTICS
VOut vs VIn (TK63115H/S)
VOut vs VIn (TK63115H/S)
10
40
5
0
IOut=5mA
20
0
IOut=0, 50, 100, 150mA
-5
-20
-40
-60
-80
-100
-10
-15
-20
-25
-30
0
1
2
3
4
4
4
5
5
5
6
6
6
-100
0
100
200
200
200
300
300
300
VIn [V]
VIn-VOut [mV]
VOut vs VIn (TK63128H/S)
VOut vs VIn (TK63128H/S)
10
40
5
0
IOut=5mA
20
0
IOut=0, 50, 100, 150mA
-5
-20
-40
-60
-80
-100
-10
-15
-20
-25
-30
0
1
2
3
-100
0
100
VIn-VOut [mV]
VIn [V]
VOut vs VIn (TK63142H/S)
VOut vs VIn (TK63142H/S)
10
40
5
0
IOut=5mA
20
0
IOut=0, 50, 100, 150mA
-5
-20
-40
-60
-80
-100
-10
-15
-20
-25
-30
0
1
2
3
-100
0
100
VIn [V]
VIn-VOut [mV]
AP-MS0037-E-00
- 8 -
2011/02
[TK631xxB/H/S]
VDrop vs IOut (TK63115H/S)
VOut vs IOut (TK63115H/S)
0
-50
2
-100
-150
-200
-250
-300
-350
-400
1.5
1
0.5
0
0
50
100
150
150
150
200
0
100
200
300
300
300
400
400
400
500
IOut [mA]
IOut [mA]
VDrop vs IOut (TK63128H/S)
VOut vs IOut (TK63128H/S)
0
-50
4
3.5
3
-100
-150
-200
-250
-300
-350
-400
2.5
2
1.5
1
0.5
0
0
50
100
200
0
100
200
IOut [mA]
500
IOut [mA]
VDrop vs IOut (TK63142H/S)
VOut vs IOut (TK63142H/S)
0
-50
6
5
4
3
2
1
0
-100
-150
-200
-250
-300
-350
-400
0
50
100
200
0
100
200
IOut [mA]
500
IOut [mA]
AP-MS0037-E-00
- 9 -
2011/02
[TK631xxB/H/S]
VOut vs IOut (TK63115H/S)
VOut vs Ta (TK63115H/S)
10
5
100
80
0
60
-5
40
-10
-15
-20
-25
-30
-35
-40
20
0
-20
-40
-60
-80
-100
0
50
100
150
150
150
200
200
200
-50
-25
0
25
50
50
50
75
75
75
100
100
100
IOut [mA]
Ta [°C]
VOut vs IOut (TK63128H/S)
VOut vs Ta (TK63128H/S)
10
5
100
80
0
60
-5
40
-10
-15
-20
-25
-30
-35
-40
20
0
-20
-40
-60
-80
-100
0
50
100
-50
-25
0
25
IOut [mA]
Ta [°C]
VOut vs IOut (TK63142H/S)
VOut vs Ta (TK63142H/S)
10
5
100
80
0
60
-5
40
-10
-15
-20
-25
-30
-35
-40
20
0
-20
-40
-60
-80
-100
0
50
100
-50
-25
0
25
IOut [mA]
Ta [°C]
AP-MS0037-E-00
- 10 -
2011/02
[TK631xxB/H/S]
VDrop vs Ta (TK63115H/S)
0
-50
-100
-150
-200
-250
-300
-350
-400
IOut=100mA
IOut=150mA
-50
-25
0
25
50
50
50
75
100
Ta [°C]
VDrop vs Ta (TK63128H/S)
0
-50
IOut=100mA
IOut=150mA
-100
-150
-200
-250
-300
-350
-400
-50
-25
0
25
75
100
Ta [°C]
VDrop vs Ta (TK63142H/S)
0
-50
IOut=100mA
IOut=150mA
-100
-150
-200
-250
-300
-350
-400
-50
-25
0
25
75
100
Ta [°C]
AP-MS0037-E-00
- 11 -
2011/02
[TK631xxB/H/S]
IOut,MAX vs Ta (TK63115H/S)
IQ vs VIn (TK63115H/S)
400
300
200
140
120
100
80
VCont=VIn
60
40
20
0
-50
-25
0
25
50
50
50
75
75
75
100
100
100
0
1
2
3
4
4
4
5
6
6
6
Ta [°C]
VIn [V]
IOut,MAX vs Ta (TK63128H/S)
IQ vs VIn (TK63128H/S)
400
140
120
100
80
VCont=VIn
300
200
60
40
20
0
-50
-25
0
25
0
1
2
3
5
Ta [°C]
VIn [V]
IOut,MAX vs Ta (TK63142H/S)
IQ vs VIn (TK63142H/S)
400
140
120
100
80
VCont=VIn
300
200
60
40
20
0
-50
-25
0
25
0
1
2
3
5
Ta [°C]
VIn [V]
AP-MS0037-E-00
- 12 -
2011/02
[TK631xxB/H/S]
IStandby vs VIn (TK63115H/S)
IGND vs IOut (TK63115H/S)
10
9
8
7
6
5
4
3
2
1
0
200
180
160
140
120
100
80
VCont=0V
VCont=VIn
60
40
20
0
0
1
2
3
4
4
4
5
6
6
6
0
50
100
150
200
200
200
VIn [V]
IOut [mA]
IStandby vs VIn (TK63128H/S)
IGND vs IOut (TK63128H/S)
10
9
8
7
6
5
4
3
2
1
0
200
180
160
140
120
100
80
VCont=0V
VCont=VIn
60
40
20
0
0
1
2
3
5
0
50
100
150
VIn [V]
IOut [mA]
IStandby vs VIn (TK63142H/S)
IGND vs IOut (TK63142H/S)
10
9
8
7
6
5
4
3
2
1
0
200
180
160
140
120
100
80
VCont=0V
VCont=VIn
60
40
20
0
0
1
2
3
5
0
50
100
150
VIn [V]
IOut [mA]
AP-MS0037-E-00
- 13 -
2011/02
[TK631xxB/H/S]
IQ vs Ta (TK63115H/S)
IGND vs Ta (TK63115H/S)
140
120
100
80
140
120
100
80
VCont=VIn
VCont=VIn, IOut=50mA
60
60
40
40
20
20
0
0
-50
-25
0
25
50
50
50
75
100
100
100
-50
-25
0
25
50
75
100
100
100
Ta [°C]
Ta [°C]
IQ vs Ta (TK63128H/S)
IGND vs Ta (TK63128H/S)
140
120
100
80
140
120
100
80
VCont=VIn
VCont=VIn, IOut=50mA
60
60
40
40
20
20
0
0
-50
-25
0
25
75
-50
-25
0
25
50
75
Ta [°C]
Ta [°C]
IQ vs Ta (TK63142H/S)
IGND vs Ta (TK63142H/S)
140
120
100
80
140
120
100
80
VCont=VIn
VCont=VIn, IOut=50mA
60
60
40
40
20
20
0
0
-50
-25
0
25
75
-50
-25
0
25
50
75
Ta [°C]
Ta [°C]
AP-MS0037-E-00
- 14 -
2011/02
[TK631xxB/H/S]
ICont vs VCont, VOut vs VCont (TK63115H/S)
VCont vs Ta (TK63115H/S)
8
2
1.4
1.2
1
6
1.5
1
VOut
0.8
0.6
0.4
0.2
0
4
2
0.5
0
ICont
0
0
0.5
1
1.5
2
2
2
-50
-25
0
25
50
50
50
75
75
75
100
100
100
VCont [V]
Ta [°C]
ICont vs VCont, VOut vs VCont (TK63128H/S)
VCont vs Ta (TK63128H/S)
8
4
3
2
1
0
1.4
1.2
1
6
VOut
0.8
0.6
0.4
0.2
0
4
2
ICont
0
0
0.5
1
1.5
-50
-25
0
25
VCont [V]
Ta [°C]
ICont vs VCont, VOut vs VCont (TK63142H/S)
VCont vs Ta (TK63142H/S)
6
6
5
4
3
2
1
0
1.4
1.2
1
5
4
VOut
0.8
0.6
0.4
0.2
0
3
2
1
0
ICont
0
0.5
1
1.5
-50
-25
0
25
VCont [V]
Ta [°C]
AP-MS0037-E-00
- 15 -
2011/02
[TK631xxB/H/S]
ICont vs Ta (TK631xxH/S)
2.5
2
VCont=1.3V
1.5
1
0.5
0
-50
-25
0
25
50
75
100
Ta [°C]
AP-MS0037-E-00
- 16 -
2011/02
[TK631xxB/H/S]
10-2-. AC CHARACTERISTICS
RR vs VIn (TK63115H/S)
RR vs Frequency (TK63115H/S)
0
0
-10
-20
-30
CIn=1.0µF, Vripple=0.1Vp-p, f=1kHz
-10
IOut=10mA
-20
IOut=200mA
-30
150mA
COut=1.0µF(cer.)
-40
-50
-40
-50
100mA
50mA
10mA
-60
-60
-70
-70
COut=1.0µF(tant.)
-80
-80
-90
-90
-100
-100
0
0.5
1
1.5
2
2.5
3
3.5
3.5
2.5
100
1k
10k
100k
1M
VIn-VOut [V]
Frequency [Hz]
RR vs VIn (TK63128H/S)
RR vs Frequency (TK63128H/S)
0
0
-10
-20
-30
CIn=1.0µF, Vripple=0.1Vp-p, f=1kHz
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
IOut=10mA
IOut=200mA
150mA
100mA
50mA
COut=1.0µF(cer.)
-40
-50
10mA
-60
-70
COut=1.0µF(tant.)
-80
-90
-100
0
0.5
1
1.5
2
2.5
3
100
1k
10k
Frequency [Hz]
100k
1M
VIn-VOut [V]
RR vs VIn (TK63142H/S)
RR vs Frequency (TK63142H/S)
0
0
-10
-20
-30
CIn=1.0µF, Vripple=0.1Vp-p, f=1kHz
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
IOut=10mA
IOut=200mA
150mA
100mA
50mA
COut=1.0µF(cer.)
-40
-50
10mA
-60
-70
COut=1.0µF(tant.)
-80
-90
-100
0
0.5
1
1.5
2
100
1k
10k
Frequency [Hz]
100k
1M
VIn-VOut [V]
AP-MS0037-E-00
- 17 -
2011/02
[TK631xxB/H/S]
RR vs Frequency (TK63115H/S)
The ripple rejection (RR) characteristic depends on the
characteristic and the capacitance value of the capacitor
connected to the output side. The RR characteristic of
50kHz or more varies greatly with the capacitor on the
output side and PCB pattern. If necessary, please confirm
stability of your design.
0
-10
-20
-30
IOut=10mA
COut=0.68µ, 1.0µ, 2.2µ, 4.7µF(cer.)
-40
-50
-60
-70
-80
-90
-100
100
1k
10k
100k
1M
Frequency [Hz]
RR vs Frequency (TK63128H/S)
0
-10
-20
-30
IOut=10mA
COut=0.68µ, 1.0µ, 2.2µ, 4.7µF(cer.)
-40
-50
-60
-70
-80
-90
-100
100
1k
10k
100k
1M
Frequency [Hz]
RR vs Frequency (TK63142H/S)
0
-10
-20
-30
IOut=10mA
COut=0.68µ, 1.0µ, 2.2µ, 4.7µF(cer.)
-40
-50
-60
-70
-80
-90
-100
100
1k
10k
100k
1M
Frequency [Hz]
AP-MS0037-E-00
- 18 -
2011/02
[TK631xxB/H/S]
VNoise vs VIn (TK63115H/S)
VNoise vs IOut (TK63115H/S)
100
90
80
70
60
50
40
30
20
10
0
100
90
80
70
60
50
40
30
20
10
0
IOut=30mA
1
2
3
4
5
6
6
6
0
50
100
150
150
150
200
200
200
VIn [V]
IOut [mA]
VNoise vs VIn (TK63128H/S)
VNoise vs IOut (TK63128H/S)
100
90
80
70
60
50
40
30
20
10
0
100
90
80
70
60
50
40
30
20
10
0
IOut=30mA
2.5
3
3.5
4
4.5
5
5.5
0
50
100
VIn [V]
IOut [mA]
VNoise vs VIn (TK63142H/S)
VNoise vs IOut (TK63142H/S)
100
90
80
70
60
50
40
30
20
10
0
100
90
80
70
60
50
40
30
20
10
0
IOut=30mA
4
4.5
5
5.5
0
50
100
VIn [V]
IOut [mA]
AP-MS0037-E-00
- 19 -
2011/02
[TK631xxB/H/S]
VNoise vs VOut (TK631xxH/S)
VNoise vs Frequency (TK63115H/S)
100
90
80
70
60
50
40
30
20
10
0
10
IOut=30mA
IOut=10mA
1
0.1
0.01
100k
100k
100k
1.5
2
2.5
3
3.5
4
4.5
10
100
1k
10k
VOut [V]
Frequency [Hz]
VNoise vs Frequency (TK63128H/S)
10
IOut=10mA
1
0.1
0.01
10
100
1k
10k
Frequency [Hz]
VNoise vs Frequency (TK63142H/S)
10
IOut=10mA
1
0.1
0.01
10
100
1k
10k
Frequency [Hz]
AP-MS0037-E-00
- 20 -
2011/02
[TK631xxB/H/S]
10-3-. TRANSIENT CHARACTERISTICS
Line Transient (TK63115H/S)
Load Transient (IOut=5100mA) (TK63115H/S)
100mA
3.5V
5mA
100mA/div
50mV/div
VIn
IOut
2.5V
VOut
IOut=30, 100, 150mA
VOut
10mV/div
10mV/div
10mV/div
COut=2.2µF
COut=1.0µF
COut=0.68µF
20µsec/div
Time
10µsec/div
Time
Line Transient (TK63128H/S)
Load Transient (IOut=5100mA) (TK63128H/S)
100mA
4.8V
5mA
100mA/div
50mV/div
VIn
IOut
3.8V
VOut
IOut=30, 100, 150mA
VOut
COut=2.2µF
COut=1.0µF
COut=0.68µF
20µsec/div
Time
10µsec/div
Time
Line Transient (TK63142H/S)
Load Transient (IOut=5100mA) (TK63142H/S)
100mA
6.2V
5mA
100mA/div
50mV/div
VIn
IOut
5.2V
VOut
IOut=30, 100, 150mA
VOut
COut=2.2µF
COut=1.0µF
COut=0.68µF
20µsec/div
Time
10µsec/div
Time
AP-MS0037-E-00
- 21 -
2011/02
[TK631xxB/H/S]
Load Transient (IOut=0100mA) (TK63115H/S)
100mA
100mA
IOut
IOut
0 or 5mA
100mA/div
100mV/div
100mA/div
100mV/div
0 or 5mA
0
0
5
100mA
100mA
100mA
VOut
VOut
100mA
5
10µsec/div
Time
5msec/div
Time
Load Transient (IOut=0100mA) (TK63128H/S)
100mA
100mA
IOut
100mA/div
100mV/div
IOut
0 or 5mA
100mA/div
100mV/div
0 or 5mA
0
0
5
100mA
100mA
100mA
VOut
VOut
100mA
5
10µsec/div
Time
2msec/div
Time
Load Transient (IOut=0100mA) (TK63142H/S)
100mA
100mA
IOut
IOut
0 or 5mA
100mA/div
100mV/div
100mA/div
100mV/div
0 or 5mA
0
0
5
100mA
100mA
100mA
VOut
VOut
100mA
5
10µsec/div
Time
1msec/div
Time
AP-MS0037-E-00
- 22 -
2011/02
[TK631xxB/H/S]
On/Off Transient (VCont=01.3V) (TK63115H/S)
On/Off Transient (VCont=1.30V) (TK63115H/S)
1V/div
1V/div
VCont
VCont
COut=0.68, 1.0, 2.2, 4.7µF
0.5V/div
0.5V/div
VOut
VOut
COut=0.68, 1.0, 2.2, 4.7µF
IIn
IIn
200mA/div
200mA/div
IOut=30mA
IOut=30mA
10µsec/div
Time
200µsec/div
Time
On/Off Transient (VCont=01.3V) (TK63128H/S)
On/Off Transient (VCont=1.30V) (TK63128H/S)
1V/div
1V/div
VCont
VCont
1V/div
1V/div
VOut
VOut
COut=0.68, 1.0, 2.2, 4.7µF
COut=0.68, 1.0, 2.2, 4.7µF
IIn
IIn
200mA/div
200mA/div
IOut=30mA
10µsec/div
IOut=30mA
200µsec/div
Time
Time
On/Off Transient (VCont=01.3V) (TK63142H/S)
On/Off Transient (VCont=1.30V) (TK63142H/S)
1V/div
1V/div
VCont
VCont
2V/div
2V/div
VOut
VOut
COut=0.68, 1.0, 2.2, 4.7µF
COut=0.68, 1.0, 2.2, 4.7µF
IIn
IIn
200mA/div
200mA/div
IOut=30mA
10µsec/div
IOut=30mA
200µsec/div
Time
Time
AP-MS0037-E-00
- 23 -
2011/02
[TK631xxB/H/S]
11-. PIN DESCRIPTION
Pin No.
Pin
Internal Equivalent Circuit
Description
GND Terminal
TK631xxH TK631xxS Description
2, 5
2
GND
Control Terminal
ESD
protection
VCont > 1.3V : On
VCont < 0.25V : Off
VCont
6
3
VCont
The pull-down resistor (about
675k
675k) is built-in.
Output Terminal
VIn
VOut
3
5
VOut
ESD
protection
1
4
1
4
VIn
NC
Input Terminal
No Connected
AP-MS0037-E-00
- 24 -
2011/02
[TK631xxB/H/S]
Fig12-2: Output Current vs Stable Operation Area
(TK631xxH/S)
12-. APPLICATIONS INFORMATION
12-1-. Stability
TK63115H/S
Linear regulators require input and output capacitors in
order to maintain the regulator's loop stability. If a 1.0µF
capacitor is connected to the output side, the IC provides
stable operation. However, it is recommended to use as
large a value capacitor as is practical. The output noise
and the ripple noise decrease as the value of the capacitor
increases.
100
Unstable Area
10
Stable Area
COut=0.68uF
1
A recommended value of the application is as follows.
CIn=1.0µF, COut=1.0µF
It is not possible to determine this indiscriminately.
Please confirm the stability in your design.
0.1
0.01
Fig12-1: Capacitor in the application
0
50
100
150
200
VIn
VOut
IOut (mA)
TK631xx
TK63128H/S
CIn
1.0µF
COut
1.0µF
100
10
VCont
Unstable Area
Stable Area
COut=0.68uF
1
0.1
0.01
0
50
100
150
200
IOut (mA)
TK63142H/S
100
10
Unstable Area
Stable Area
COut=0.68uF
1
0.1
0.01
0
50
100
150
200
IOut (mA)
AP-MS0037-E-00
- 25 -
2011/02
[TK631xxB/H/S]
Fig.Error! Reference source not found. and Fig.12-2
show the stable operation area of output current and the
equivalent series resistance (ESR) with a ceramic
capacitor of 0.68µF. ESR of the output capacitor must be
in the stable operation area. Please select the best output
capacitor according to the voltage and current used. The
stability of the regulator improves as the value of the
output side capacitor increases (the stable operation area
extends.) Please use as large a value capacitor as is
practical.
For evaluation
Kyocera : CM05B104K10AB , CM05B224K10AB ,
CM105B104K16A , CM105B224K16A ,
CM21B225K10A
Murata : GRM36B104K10 , GRM42B104K10 ,
GRM39B104K25 , GRM39B224K10 ,
GRM39B105K6.3
Fig12-3: ex. Ceramic Capacitance vs Voltage,
Temperature
Capacitance vs Voltage
100
90
B Curve
80
70
60
50
F Curve
4
0
2
6
8
10
12
Bias Voltage(V)
Capacitance vs Temperature
100
90
80
70
60
50
B Curve
F Curve
-50 -25
0
25
50
75
100
Ta(°C)
Generally, a ceramic capacitor has both a temperature
characteristic and a voltage characteristic. Please consider
both characteristics when selecting the part. The B curves
are the recommended characteristics.
AP-MS0037-E-00
- 26 -
2011/02
[TK631xxB/H/S]
package unit assumed because of its small size. Heat is
carried away from the device by being mounted on the
PCB. This value is directly effected by the material and
the copper pattern etc. of the PCB. The losses are
approximately 500mW(SON2017-6/SOT23-5). Enduring
these losses becomes possible in a lot of applications
operating at 25C.
12-2-. Layout
Fig12-4: Layout example (TK631xxH)
VCont
GND
NC
The overheating protection circuit operates when the
junction temperature reaches 150C (this happens when
the regulator is dissipating excessive power, outside
temperature is high, or heat radiation is bad). The output
current and the output voltage will drop when the
protection circuit operates. However, operation begins
again as soon as the output voltage drops and the
temperature of the chip decreases.
VIn
GND
(Top View)
VOut
PCB Material : Glass epoxy
Size : 10mm7mm×0.8mm
How to determine the thermal resistance when
mounted on PCB
Fig12-5: Layout example (TK631xxS)
The thermal resistance when mounted is expressed as
follows:
VOut
GND
NC
Tj=jaPd+Ta
Tj of IC is set around 150C. Pd is the value when the
thermal sensor is activated.
If the ambient temperature is 25C, then:
150=jaPd+25
ja=125/Pd (C /mW)
VIn
GND VCont
(Top View)
PCB Material : Glass epoxy
Size : 12mm7mm×0.8mm
Please do derating with with 4mW/C at
Pd=500mW(SON2017-6/SOT23-5), and 25C or more.
Thermal resistance (ja) is=250C/W.
Fig12-6: Derating Curve (TK631xxH/S)
Pd(mW)
500
-4mW/°C
25
50
100
(85°C)
150°C
The package loss is limited at the temperature that the
internal temperature sensor works (about 150C).
Therefore, the package loss is assumed to be an internal
limitation. There is no heat radiation characteristic of the
AP-MS0037-E-00
- 27 -
2011/02
[TK631xxB/H/S]
Fig12-8: The use of On/Off control
Pd is easily calculated.
A simple way to determine Pd is to calculate VInIIn
when the output side is shorted. Input current gradually
falls as output voltage rises after working thermal
shutdown. You should use the value when thermal
equilibrium is reached.
Vsat
REG
On/Off Cont.
Fig12-7: How to determine DPd
Pd (mW)
Control Terminal Voltage ((VCont
)
On/Off State
VCont > 1.3V
On
2
VCont < 0.25V
Off
Pd
Parallel Connected On/Off Control
DPd
3
5
Fig12-9: The example of parallel connected IC
TK63142
VIn
VOut
4
4.2V
25
50
75
100 125 150
Ta (°C)
Procedure (When mounted on PCB.)
1. Find Pd (VInIIn when the output side is short-
circuited).
3.3V
1.5V
TK63133
TK63115
2. Plot Pd against 25C.
3. Connect Pd to the point corresponding to the 150C
with a straight line.
4. In design, take a vertical line from the maximum
operating temperature (e.g., 75C) to the derating
curve.
On/Off
Cont.
5. Read off the value of Pd against the point at which the
vertical line intersects the derating curve. This is taken
as the maximum power dissipation DPd.
6. DPd (VIn,MAXVOut)=IOut (at 75C)
The above figure is multiple regulators being controlled
by a single On/Off control signal. There is concern of
overheating, because the power loss of the low voltage
side IC (TK63115H/S) is large. The series resistor (R) is
put in the input line of the low output voltage regulator in
order to prevent over-dissipation. The voltage dropped
across the resistor reduces the large input-to-output
voltage across the regulator, reducing the power
dissipation in the device. When the thermal sensor works,
a decrease of the output voltage, oscillation, etc. may be
observed.
The maximum output current at the highest operating
temperature will be IOut DPd (VIn,MAXVOut).
Please use the device at low temperature with better
radiation. The lower temperature provides better quality.
12-3-. On/Off Control
It is recommended to turn the regulator Off when the
circuit following the regulator is not operating. A design
with little electric power loss can be implemented. We
recommend the use of the On/Off control of the regulator
without using a high side switch to provide an output
from the regulator. A highly accurate output voltage with
low voltage drop is obtained.
Because the control current is small, it is possible to
control it directly by CMOS logic.
AP-MS0037-E-00
- 28 -
2011/02
[TK631xxB/H/S]
12-4-. Definition of term
Characteristics
Protections
Over Current Sensor
The over current sensor protects the device when there is
excessive output current. It also protects the device if the
output is accidentally connected to ground.
Output Voltage (VOut
)
The output voltage is specified with VIn=(VOutTYP+1V)
and IOut=5mA.
Maximum Output Current (IOut, MAX
)
Thermal Sensor
The rated output current is specified under the condition
where the output voltage drops to 90% of the value
specified with IOut=5mA. The input voltage is set to
VOutTYP+1V and the current is pulsed to minimize
temperature effect.
The thermal sensor protects the device in case the
junction temperature exceeds the safe value (Tj=150C).
This temperature rise can be caused by external heat,
excessive power dissipation caused by large input to
output voltage drops, or excessive output current. The
regulator will shut off when the temperature exceeds the
safe value. As the junction temperatures decrease, the
regulator will begin to operate again. Under sustained
fault conditions, the regulator output will oscillate as the
device turns off then resets. Damage may occur to the
device under extreme fault.
Dropout Voltage (VDrop
)
The dropout voltage is the difference between the input
voltage and the output voltage at which point the
regulator starts to fall out of regulation. Below this value,
the output voltage will fall as the input voltage is reduced.
It is dependent upon the output voltage, the load current,
and the junction temperature.
Please prevent the loss of the regulator when this
protection operates, by reducing the input voltage or
providing better heat efficiency.
Line Regulation (LinReg)
Line regulation is the ability of the regulator to maintain a
constant output voltage as the input voltage changes. The
line regulation is specified as the input voltage is changed
ESD
MM : 200pF 0 150V or more
HBM : 100pF 1.5k 2000V or more
from VIn=VOut,TYP+1V to VIn=6V. It is
measurement to minimize temperature effect.
a pulse
Load Regulation (LoaReg)
Load regulation is the ability of the regulator to maintain
a constant output voltage as the load current changes. It is
a pulsed measurement to minimize temperature effects
with the input voltage set to VIn=VOut,TYP+1V. The load
regulation is specified under an output current step
condition of 5mA to 100mA.
Ripple Rejection (RR)
Ripple rejection is the ability of the regulator to attenuate
the ripple content of the input voltage at the output. It is
specified with 500mVP-P, 1kHz super-imposed on the
input voltage, where VIn=VOut,TYP+1.5V. Ripple rejection
is the ratio of the ripple content of the output vs. input and
is expressed in dB.
Standby Current (IStandby
)
Standby current is the current which flows into the
regulator when the output is turned off by the control
function (VCont=0V).
AP-MS0037-E-00
- 29 -
2011/02
[TK631xxB/H/S]
13-. PACKAGE OUTLINE
6-Lead-Small Outline Non-Leaded Package
: SON2017-6
0.3
Mark
+0.2
2.0
0.1
Lead Free Mark
6
4
0.65
Reference Mount Pad
1 Pin Mark
1
3
Lot No.
+0.10
0.05
0.65
0.20
M
0.10
0.2
2.1
(0.2)
)
(0.2
1
3
6
4
Unit : mm
Package Structure and Others
Package Material
Terminal Material : Copper Alloy
Terminal Finish
Solder Composition : Sn-2.5Ag
: Epoxy Resin
Mark Method
: Laser
: Japan
: 0.0066g
County of Origin
: Lead Free Solder Plating(5~15µm) Mass
Marking
Part Number
Marking Code
Part Number
Marking Code
Part Number
Marking Code
TK63115H
TK63116H
TK63118H
TK63125H
TK63126H
TK63127H
C15
TK63128H
C28
TK63133H
C33
C16
C18
C25
C26
C27
TK63101H
TK63129H
TK63130H
TK63131H
TK63132H
C01
C29
C30
C31
C32
TK63135H
C35
AP-MS0037-E-00
- 30 -
2011/02
[TK631xxB/H/S]
5-Lead-Surface Mount Discrete Package: SOT23-5
Mark
0.7
Lead Free Mark
4
5
0.95
0.95
3
1
+0.10
0.05
0.4
M
0.1
Reference Mount Pad
0.95
0.95
+
0.2
2.9
0.4 +
0.2
+
0.2
2.8
0.1
Unit : mm
Package Structure and Others
Package Material
Terminal Material : Copper Alloy
Terminal Finish
Solder Composition : Sn-2.5Ag
: Epoxy Resin
Mark Method
: Laser
Country of Origin : Japan
:
Mass
: 0.016g
Lead Free Solder Plating(5~15m)
Marking
Part Number
Marking Code
Part Number
Marking Code
Part Number
Marking Code
TK63115S
TK63116S
TK63118S
TK63125S
TK63126S
TK63127S
15J
TK63128S
28J
TK63133S
33J
16J
18J
25J
26J
27J
TK63101S
TK63129S
TK63130S
TK63131S
TK63132S
01J
29J
30J
31J
32J
TK63135S
35J
AP-MS0037-E-00
- 31 -
2011/02
[TK631xxB/H/S]
IMPORTANT NOTICE
These products and their specifications are subject to change without notice.
When you consider any use or application of these products, please make inquiries the sales office of
Asahi Kasei Microdevices Corporation (AKM) or authorized distributors as to current status of the
products.
Descriptions of external circuits, application circuits, software and other related information contained
in this document are provided only to illustrate the operation and application examples of the
semiconductor products. You are fully responsible for the incorporation of these external circuits,
application circuits, software and other related information in the design of your equipments. AKM
assumes no responsibility for any losses incurred by you or third parties arising from the use of these
information herein. AKM assumes no liability for infringement of any patent, intellectual property, or
other rights in the application or use of such information contained herein.
Any export of these products, or devices or systems containing them, may require an export license or
other official approval under the law and regulations of the country of export pertaining to customs
and tariffs, currency exchange, or strategic materials.
AKM products are neither intended nor authorized for use as critical componentsNote1) in any safety,
life support, or other hazard related device or systemNote2), and AKM assumes no responsibility for
such use, except for the use approved with the express written consent by Representative Director of
AKM. As used here:
Note1) A critical component is one whose failure to function or perform may reasonably be expected to
result, whether directly or indirectly, in the loss of the safety or effectiveness of the device or system
containing it, and which must therefore meet very high standards of performance and reliability.
Note2) A hazard related device or system is one designed or intended for life support or maintenance of
safety or for applications in medicine, aerospace, nuclear energy, or other fields, in which its failure to
function or perform may reasonably be expected to result in loss of life or in significant injury or damage to
person or property.
It is the responsibility of the buyer or distributor of AKM products, who distributes, disposes of, or
otherwise places the product with a third party, to notify such third party in advance of the above
content and conditions, and the buyer or distributor agrees to assume any and all responsibility and
liability for and hold AKM harmless from any and all claims arising from the use of said product in
the absence of such notification.
AP-MS0037-E-00
- 32 -
2011/02
相关型号:
©2020 ICPDF网 联系我们和版权申明