UDN5713 [ALLEGRO]

DUAL PERIPHERAL AND POWER DRIVER TRANSIENT PROTECTED OUTPUTS; 双外设和电源驱动器瞬态保护输出
UDN5713
型号: UDN5713
厂家: ALLEGRO MICROSYSTEMS    ALLEGRO MICROSYSTEMS
描述:

DUAL PERIPHERAL AND POWER DRIVER TRANSIENT PROTECTED OUTPUTS
双外设和电源驱动器瞬态保护输出

驱动器 输出元件
文件: 总4页 (文件大小:91K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
5713  
DUAL PERIPHERAL AND POWER DRIVER  
— TRANSIENT PROTECTED OUTPUTS  
This “mini-DlP” dual peripheral and power driver is a bipolar  
monolithic integrated circuit incorporating NOR logic gates, high-  
current switching transistors, and transient suppression diodes on the  
same chip. The two output transistors are capable of simultaneously  
sinking 300 mA continuously at ambient temperatures of up to +70°C.  
In the OFF state, this driver will withstand at least 80 V.  
The UDN5713M dual driver is ideally suited for interface between  
low-level or high-level logic and high-current/high-voltage loads.  
Typical applications include driving peripheral loads such as incandes-  
cent lamps, light-emitting diodes, memories, and heaters with a load  
current of up to 600 mA.  
The integral transient suppression diodes allow the use of these  
Dwg. No. A-9789  
drivers with inductive loads such as relays, solenoids, or stepping  
motors without the need for discrete diodes. Similar devices with four  
drivers per package are the 5703 and 5706.  
FEATURES  
DTL/TTL/PMOS/CMOS Compatible Inputs  
Low Input Current  
ABSOLUTE MAXIMUM RATINGS  
300 mA Continuous Output Current  
Stand-off Voltage of 80 V  
Supply Voltage, VCC . . . . . . . . . . . . . . 7.0V  
Input Voltage, VIN . . . . . . . . . . . . . . . . . 30V  
Output Off-State Voltage,  
VOFF . . . . . . . . . . . . . . . . . . . . . . . . 80 V  
Output On-State Sink Current,  
ION . . . . . . . . . . . . . . . . . . . . . . 600 mA  
Suppression Diode Off-State Voltage,  
VOFF . . . . . . . . . . . . . . . . . . . . . . . . 80 V  
Suppression Diode On-State Current,  
ION . . . . . . . . . . . . . . . . . . . . . . 600 mA  
Power Dissipation at TA = 25°C, PD  
Package . . . . . . . . . . . . . . . . . . . 1.5 W*  
Each Driver . . . . . . . . . . . . . . . . . 0.8 W  
Operating Free-Air Temperature Range,  
TA . . . . . . . . . . . . . . . . . -20°C to +85°C  
Storage Temperature Range,  
TS . . . . . . . . . . . . . . . . -55°C to +150°C  
*Derate at the rate of 12.5 mW/°C above  
TA = 25°C.  
Always order by complete part number, e.g., UDN5713M .  
5713  
DUAL PERIPHERAL AND POWER DRIVER  
RECOMMENDED OPERATING CONDITIONS  
Min.  
4.75  
0
Nom.  
5.0  
Max.  
5.25  
+85  
Units  
V
Supply Voltage (VCC  
)
Operating Temperature Range  
+25  
°C  
Current into any output (ON state)  
300  
mA  
ELECTRICAL CHARACTERISTICSover operating temperaturerange  
(unless otherwise noted).  
Test Conditions  
Limits  
Driven  
Input  
Other  
Input Output Min.  
Characteristic  
Symbol  
Temp.  
VCC  
Typ.  
Max. Units Notes  
“1” Input Voltage  
“0” Input Voltage  
VIN(1)  
VIN(0)  
MIN  
MIN  
2.0  
V
V
0.8  
“0” Input Current at all  
Inputs except Strobe  
IIN(0)  
IIN(0)  
MAX  
MAX  
0.4 V  
0.4 V  
30 V  
30 V  
-50  
-100  
-200  
µA  
µA  
2
“0” Input Current at Strobe  
-100  
“1” Input Current at all  
Inputs except Strobe  
IIN(1)  
IIN(1)  
VIK  
MAX  
MAX  
MIN  
30 V  
30 V  
0 V  
0 V  
10  
20  
µA  
µA  
V
2
“1” Input Current at Strobe  
Input Clamp Voltage  
-12 mA  
-1.5  
SWITCHING CHARACTERISTICS at VCC = 5.0 V, TA = 25°C  
Limits  
Max. Units Notes  
Characteristic  
Symbol  
Test Conditions  
Min.  
Typ.  
Turn-on Delay Time  
t
V = 70 V, R = 465 (10 Watts),  
200  
500  
ns  
3
pd0  
S
L
CL = 15 pF  
Turn-off Delay Time  
t
V = 70 V, R = 465 (10 Watts),  
300  
750  
ns  
3
pd1  
S
L
CL = 15 pF  
NOTES: 1. Typical values are at VCC = 5.0 V, TA = 25°C.  
2. Each input tested separately.  
3. Voltage values shown in the test circuit waveforms are with respect to network ground terminal.  
4. Capacitance values specified include probe and test fixture capacitance.  
INPUT PULSE CHARACTERISTICS  
VIN(0) = 0 V  
t = 7 ns  
f
t = 1 µs  
p
V
IN(1) = 3.5 V  
t = 14 ns  
r
PRR = 500 kHz  
115 Northeast Cutoff, Box 15036  
orcester, Massachusetts 01615-0036 (508) 853-5000  
W
Copyright © 1976, 1997, Allegro MicroSystems, Inc.  
5713  
DUAL PERIPHERAL AND POWER DRIVER  
ELECTRICAL CHARACTERISTICSover operating temperaturerange  
(unless otherwise noted).  
Test Conditions  
Limits  
Typ. Max. Units Notes  
Driven  
Input  
Other  
Input Output Min.  
Characteristic  
Symbol  
Temp.  
VCC  
“1” Output Reverse Current  
lOFF  
MIN  
OPEN  
MIN  
2.0 V  
2.0 V  
0.8 V  
0.8 V  
0 V  
0 V  
0 V  
80 V  
80 V  
150 mA  
300 mA  
OPEN  
100  
100  
0.5  
0.7  
200  
1.75  
13  
µA  
µA  
V
3
“0” Output Voltage  
VON  
0.8 V  
0.8 V  
0 V  
0.35  
0.5  
MIN  
V
Diode Leakage Current  
Diode Forward Voltage Drop  
“1” Level Supply Current  
“0” Level Supply Current  
ILK  
NOM  
NOM  
NOM  
NOM  
NOM  
NOM  
MAX  
MAX  
µA  
V
VD  
VCC  
VCC  
5.0 V  
0 V  
1.5  
8.0  
36  
4
lCC(1)  
lCC(0)  
5.0 V  
0 V  
mA  
mA  
1, 2  
1, 2  
50  
NOTES: 1. Typical values are at VCC = 5.0 V, TA = 25°C.  
2. Per package.  
3. Diode leakage current measured at VR = 80 V.  
4. Diode forward voltage drop measured at IF = 300 mA.  
5. Capacitance values specified include probe and test fixture capacitance.  
Dwg. No. A-9123A  
Dwg. No. A-7628C  
5713  
DUAL PERIPHERAL AND POWER DRIVER  
Dimensions in Inches  
0.014  
0.008  
8
5
0.430  
MAX  
0.280  
0.240  
0.300  
BSC  
4
1
0.070  
0.005  
MIN  
0.045  
0.400  
0.355  
0.210  
MAX  
0.015  
0.150  
0.115  
MIN  
0.022  
0.014  
0.100  
Dwg. MA-001-8A in  
BSC  
Dimensions in Millimeters  
(Based on 1” = 25.4 mm)  
0.355  
0.204  
8
5
10.92  
MAX  
7.11  
6.10  
7.62  
BSC  
4
1
1.77  
0.13  
MIN  
1.15  
10.16  
9.02  
5.33  
MAX  
0.39  
3.81  
2.93  
MIN  
0.558  
0.356  
2.54  
Dwg. MA-001-8A mm  
BSC  
Allegro MicroSystems, Inc. reserves the right to make, from time to time,  
such departures from the detail specifications as may be required to permit  
improvements in the design of its products.  
NOTES: 1. Lead thickness is measured at seating plane or below.  
2. Lead spacing tolerance is non-cumulative.  
3. Exact body and lead configuration at vendor’s option  
within limits shown.  
The information included herein is believed to be accurate and reliable.  
However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor  
for any infringements of patents or other rights of third parties which may result  
from its use.  
115 Northeast Cutoff, Box 15036  
Worcester, Massachusetts 01615-0036 (508) 853-5000  

相关型号:

UDN5713M

DUAL PERIPHERAL AND POWER DRIVER TRANSIENT PROTECTED OUTPUTS
ALLEGRO

UDN5713N

IC OR GATE BASED PRPHL DRVR, PDIP8, Peripheral Driver
NXP

UDN5714N

IC NOR GATE BASED PRPHL DRVR, PDIP8, Peripheral Driver
NXP

UDN5725M

Interface IC
ETC

UDN5733A

QUAD 2-INPUT PERIPHERAL/POWER DRIVERS
ETC

UDN5741M

DUAL PERIPHERAL POWER DRIVERS TRANSIENT PROTECTED OUTPUTS
ALLEGRO

UDN5742M

DUAL PERIPHERAL POWER DRIVERS TRANSIENT PROTECTED OUTPUTS
ALLEGRO

UDN5743M

DUAL PERIPHERAL POWER DRIVERS TRANSIENT PROTECTED OUTPUTS
ALLEGRO

UDN5744M

DUAL PERIPHERAL POWER DRIVERS TRANSIENT PROTECTED OUTPUTS
ALLEGRO

UDN574X

DUAL PERIPHERAL POWER DRIVERS TRANSIENT PROTECTED OUTPUTS
ALLEGRO

UDN5752M

Interface IC
ETC

UDN6116A

Interface IC
ETC