UGK3132LTTR [ALLEGRO]
Analog Circuit, 1 Func, PSSO3, TO-243AA, SOT-89, 3 PIN;型号: | UGK3132LTTR |
厂家: | ALLEGRO MICROSYSTEMS |
描述: | Analog Circuit, 1 Func, PSSO3, TO-243AA, SOT-89, 3 PIN |
文件: | 总9页 (文件大小:759K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
A3121, A3122, and A3133
Hall Effect Switches for High Temperature Operation
Discontinued Product
These parts are no longer in production The device should not be
purchased for new design applications. Samples are no longer available.
Date of status change: October 31, 2005
Recommended Substitutions:
For new customers and applications, refer to the A110x family.
NOTE: For detailed information on purchasing options, contact your
local Allegro field applications engineer or sales representative.
Allegro MicroSystems, Inc. reserves the right to make, from time to time, revisions to the anticipated product life cycle plan for a
product to accommodate changes in production capabilities, alternative product availabilities, or market demand. The information
included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor
for any infringements of patents or other rights of third parties which may result from its use.
3121, 3122, AND
3123
HALL-EFFECT SWITCHES
FOR HIGH-TEMPERATURE OPERATION
These Hall-effect switches are monolithic integrated circuits with
tighter magnetic specifications, designed to operate continuously over
extended temperatures to +150°C, and are more stable with both tem-
perature and supply voltage changes. The unipolar switching character-
istic makes these devices ideal for use with a simple bar or rod magnet.
The three basic devices (A3121, A3122, and A3123) are identical except
for magnetic switch points.
Each device includes a voltage regulator for operation with supply
voltages of 4.5 volts to 24 volts, reverse battery protection diode, qua-
dratic Hall-voltage generator, temperature compensation circuitry, small-
signal amplifier, Schmitt trigger, and an open-collector output to sink up
to 25 mA. With suitable output pull up, they can be used with bipolar or
CMOS logic circuits. The A3121 is an improved replacement for the
UGx3113 and UGx3119.
V
CC
1
2
3
The first character of the part number suffix determines the device
operating temperature range. Suffix ‘E–’ is for the automotive and
industrial temperature range of -40°C to +85°C. Suffix ‘L–’ is for the
automotive and military temperature range of -40°C to +150°C. Two
package styles provide a magnetically optimized package for most
applications. Suffix ‘–LT’ is a miniature SOT89/TO-243AA transistor
package for surface-mount applications; suffix ‘–UA’ is a three-lead
ultra-mini-SIP.
Dwg. PH-003A
Pinning is shown viewed from branded side.
FEATURES and BENEFITS
■ Superior Temp. Stability for Automotive or Industrial Applications
■ 4.5 V to 24 V Operation … Needs Only An Unregulated Supply
■ Open-Collector 25 mA Output … Compatible with Digital Logic
■ Reverse Battery Protection
ABSOLUTE MAXIMUM RATINGS
at T = +25°C
A
Supply Voltage, VCC ...........................30 V
Reverse Battery Voltage, VRCC ........ -30 V
Magnetic Flux Density, B ....... Unlimited
Output OFF Voltage, VOUT ................ 28 V
Reverse Output Voltage, VOUT ........ -0.5 V
Continuous Output Current, IOUT ... 25 mA
Operating Temperature Range, TA
■ Activate with Small, Commercially Available Permanent Magnets
■ Solid-State Reliability … No Moving Parts
■ Small Size
■ Resistant to Physical Stress
Suffix ‘E–’ ................. -40°C to +85°C
Suffix ‘L–’ ............... -40°C to +150°C
Storage Temperature Range,
TS .............................. -65°C to +170°C
Always order by complete part number, e.g., A3121EUA .
3121, 3122, AND 3123
HALL-EFFECT SWITCHES
FOR HIGH-TEMPERATURE
OPERATION
ELECTRICAL CHARACTERISTICS over operating temperature range, at VCC = 12 V.
Limits
Characteristic
Symbol
Test Conditions
Operating
Min.
4.5
—
Typ.
—
Max.
Units
Supply Voltage
VCC
24
V
Output Saturation Voltage
Output Leakage Current
Supply Current
VOUT(SAT)
IOUT = 20 mA, B > BOP
VOUT = 24 V, B < BRP
104m04V0
<1.010
—
IOFF
ICC
tr
—
µA
B < BRP
(Output
OFF)
—
4.6
9.0mA
Output Rise Time
Output Fall Time
RL = 820 Ω, CL = 20 pF
RL = 820 Ω, CL = 20 pF
0.04
0.18
2.0
2.0
µs
µs
tf
—
MAGNETIC CHARACTERISTICS in gauss over operating supply voltage range.
Part Numbers*
A3121
Typ.
A3122
Typ.
440
A3123
Typ.
Characteristic
Min.
Max.
Min.
Max.
Min.
Max
BOP at TA = 25°C
250350450
range
280340040250345
over
operating
temp.
temp.
temp.
220305050 260340430 230345
470
BRP at TA = 25°C
125
245
380
140235
410
330 180240030
over
operating
range
80245
120235
360 160240330
57010 140
Bhys at TA = 25°C
75010 140
range
75010 140
56010 150
75010 140
57010 140
over
operating
NOTES: Typical values are at TA = +25°C and VCC = 12 V.
OP = operate point (output turns ON); BRP = release point (output turns OFF); Bhys = hysteresis (BOP - BRP).
B
*Complete part number includes a suffix to identify operating temperature range (E- or L-) and package type ( -LT or -UA).
FUNCTIONAL BLOCK DIAGRAM
1
V
CC
REG.
3
2
OUTPUT
GROUND
X
Dwg. FH-005-2
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 1992, 2002 Allegro MicroSystems, Inc.
2
3121, 3122, AND 3123
HALL-EFFECT SWITCHES
FOR HIGH-TEMPERATURE
OPERATION
TYPICAL OPERATING CHARACTERISTICS
SWITCH POINTS
OUTPUT SATURATION VOLTAGE
300
400
300
200
I
= 20 mA
OUT
OPERATE POINT
V
= 4.5–24 V
CC
200
RELEASE POINT
100
V
= 12 V
CC
100
0
0
-50
150
100
125
-50
-25
0
25
50
75
100
125
150
-25
0
25
50
75
°
AMBIENT TEMPERATURE IN
C
°
AMBIENT TEMPERATURE IN
C
Dwg. GH-040
Dwg. GH-038
SUPPLY CURRENT
SUPPLY CURRENT
7.0
6.0
5.0
4.0
10
8.0
6.0
4.0
V
= 12 V
CC
B ≥ B
OP
B ≥ B
OP
B ≤ B
RP
T
= +25°C
2.0
0
A
B ≤ B
RP
125
150
100
-50
-25
0
25
50
75
0
5
10
15
20
25
°
AMBIENT TEMPERATURE IN C
SUPPLY VOLTAGE IN VOLTS
Dwg. GH-041
Dwg. GH-039
* Complete part number includes a suffix denoting operating temperature range (E- or L-) and package type ( -LT or -UA).
www.allegromicro.com
3
3121, 3122, AND 3123
HALL-EFFECT SWITCHES
FOR HIGH-TEMPERATURE
OPERATION
OPERATION
ELEMENT LOCATIONS
The output of these devices (pin 3) switches low when the mag-
netic field at the Hall element exceeds the operate point threshold (BOP).
At this point, the output voltage is VOUT(SAT). When the magnetic field
is reduced to below the release point threshold (BRP), the device output
goes high. The difference in the magnetic operate and release points is
called the hysteresis (Bhys) of the device. This built-in hysteresis allows
clean switching of the output even in the presence of external mechani-
cal vibration and electrical noise.
(±0.005" [0.13 mm] die placement)
Suffix “LT”
ACTIVE AREA DEPTH
0.0305"
0.089"
0.775 mm
2.26 mm
NOM
0.043"
1.09 mm
APPLICATIONS INFORMATION
A
Extensive applications information for Hall-effect devices is
available in:
1
2
3
• Hall-Effect IC Applications Guide, Application Note 27701;
• Hall-Effect Devices: Soldering, Gluing, Potting, Encapsulating, and
Lead Forming, Application Note 27703.1;
Dwg. MH-008-2D
• Soldering of Through-Hole Hall-Sensor Dervices, Application Note
27703; and
• Soldering of Surface-Mount Hall-Sensor Devices, Application Note
27703.2.
Suffix “UA”
ACTIVE AREA DEPTH
0.0195"
0.082"
0.50 mm
NOM
2.07 mm
All are provided in Allegro Electronic Data Book, AMS-702. or at
www.allegromicro.com
0.055"
1.38 mm
A
Allegro
BRANDED
SURFACE
1
2
3
CHANGE IN OPERATE POINT
20
Dwg. MH-011-2D
15
T
= +25°C
A
10
5.0
0
-5.0
0
5
10
15
20
25
SUPPLY VOLTAGE IN VOLTS
Dwg. GH-042
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
4
3121, 3122, AND 3123
HALL-EFFECT SWITCHES
FOR HIGH-TEMPERATURE
OPERATION
PACKAGE DESIGNATOR ‘LT’
(SOT89/TO-243AA)
Dimensions in Inches
(for reference only)
Dimensions in Millimeters
(controlling dimensions)
0.181
0.173
0.072
0.064
0.063
0.055
4.60
4.40
1.83
1.62
1.60
1.40
0.0173
0.0138
0.44
0.35
0.102
0.090
0.090
0.084
2.60
2.29
2.29
2.13
0.167
0.155
4.25
3.94
2
3
1
2
3
1
0.0189
0.0142
0.0221
0.0173
0.48
0.36
0.047
1.20
0.035
0.89
0.56
0.44
0.059
1.50
BSC
BSC
0.118
3.00
BSC
BSC
Dwg. MA-009-3A in
Dwg. MA-009-3A mm
2.5
2.0
0.098
0.079
B
B
0.031
0.8
0.102
0.181
2.6
1.2
A
2
A
2
4.6
0.047
3
1
1
3
0.028
TYP
0.031
TYP
0.7
TYP
0.8
TYP
Pads 1, 2, 3, and A — Standard SOT89 Layout
Pads 1, 2, 3, and B — Low-Stress Version
Pads 1, 2, and 3 only — Lowest Stress, But Not Self Aligning
Pads 1, 2, 3, and A — Standard SOT89 Layout
Pads 1, 2, 3, and B — Low-Stress Version
Pads 1, 2, and 3 only — Lowest Stress, But Not Self Aligning
Dwg. MA-012-3 in
Dwg. MA-012-3 mm
NOTES: 1. Exact body and lead configuration at vendor’s option within limits shown.
2. Supplied in bulk pack (500 pieces per bag) or add "TR" to part number for tape and reel.
3. Only low-temperature (≤240°C) reflow-soldering techniques are recommended for SOT89 devices.
www.allegromicro.com
5
3121, 3122, AND 3123
HALL-EFFECT SWITCHES
FOR HIGH-TEMPERATURE
OPERATION
PACKAGE DESIGNATOR ‘UA’
Dimensions in Millimeters
Dimensions in Inches
(controlling dimensions)
(for reference only)
0.164
0.159
4.17
4.04
0.062
0.058
1.57
1.47
45°
45°
0.122
0.117
3.10
2.97
45°
45°
0.79
0.031
2.16
MAX
0.085
MAX
1
2
3
1
2
3
16.26
15.24
0.44
0.35
0.640
0.600
0.0173
0.0138
0.48
0.36
0.0189
0.0142
SEE NOTE
SEE NOTE
1.27
BSC
0.050
BSC
Dwg. MH-014E mm
Dwg. MH-014E in
Radial Lead Form (order A312xxUA-LC)
NOTES: 1. Tolerances on package height and width represent
allowable mold offsets. Dimensions given are
measured at the widest point (parting line).
2. Exact body and lead configuration at vendor’s option
within limits shown.
3. Height does not include mold gate flash.
4. Recommended minimum PWB hole diameter to clear
transition area is 0.035" (0.89 mm).
5. Where no tolerance is specified, dimension is nominal.
6. Supplied in bulk pack (500 pieces per bag).
1
2
3
0.108"
(2.74 mm)
0.620"
0.500"
(15.7 mm
12.7 mm)
0.100"
(2.5 mm)
Dwg. MH-026
NOTE: Lead-form dimensions are the nominals produced on the
forming equipment. No dimensional tolerance is implied or
guaranteed for bulk packaging (500 pieces per bag).
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
6
3121, 3122, AND 3123
HALL-EFFECT SWITCHES
FOR HIGH-TEMPERATURE
OPERATION
HALL-EFFECT SENSOR ICS
UNIPOLAR HALL-EFFECT DIGITAL SWITCHES
Partial
Part
Operate
Point (G)
Release
Point (G)
Hysteresis
(G)
Replaces
and
Oper.
Number
Over Oper. Voltage & Temp. Range
Temp.
Packages
Comments
A3121x
A3122x
A3123x
A3141x
A3142x
A3143x
A3144x
220 to 500
260 to 430
230 to 470
30 to 175
115 to 245
205 to 355
35 to 450
80 to 410
120 to 360
160 to 330
10 to 145
60 to 190
150 to 300
25 to 430
60 to 150
70 to 140
70 to 140
20 to 80
30 to 80
30 to 80
>20
5 to 80
5 to 40
Typ 10
5 to 35
5 to 35
E, L
E, L
E, L
E, L
E, L
E, L
E, L
E
LT, UA
LT, UA
LT, UA
LT, UA
LT, UA
LT, UA
LT, UA
LT, UA
LT, UA
LH, LT, UA
UA
3019, 3113, 3119
3040, 3140
3020, 3120
2-wire operation
2-wire
chopper stabilized
A3161E <160 (Typ 130) >30 (Typ 110)
A3163E <160 (Typ 98)
A3240x
A3250x
A3251x
>30 (Typ 79)
>5 (Typ 25)
E
<50 (Typ 35)
<50 to >350
<50 to >350
E, L
J, L
J, L
_
_
programmable, chopper stabilized
programmable, chopper stabilized
2-wire, chopper stabilized,
output normally high
2-wire, chopper stabilized,
output normally low
UA
A3361E
A3362E
<125
<125
>40
>40
5 to 30
5 to 30
E
E
LH, LT, UA
LH, LT, UA
MICROPOWER OMNIPOLAR HALL-EFFECT DIGITAL SWITCHES
Partial
Part
Operate
Points (G)
Release
Points (G)
Hysteresis
(G)
Average
Supply
Oper.
Number
Over Oper. Voltage & Temp. Range
Temp.
Packages
Current (µA)
A3209E
A3210E
A3212E
>-60, <60
>-60, <60
>-55, <55
<-5, >5
<-5, >5
<-10, >10
Typ 7.7
Typ 7.7
Typ. 8
E
E
E
LH, UA
LH, UA
LH, UA
<425 (Typ 145)
<60 (Typ 8.8)
<10 (Typ 4.2)
BIPOLAR HALL-EFFECT DIGITAL SWITCHES
Partial
Part
Operate
Point (G)
Release
Point (G)
Hysteresis
(G)
Replaces
and
Oper.
Number
Over Oper. Voltage & Temp. Range
Temp.
Packages
Comments
UGx3132 <95 (Typ 32) >-95 (Typ -20) >30 (Typ 52)
UGx3133 <75 (Typ 32) >-75 (Typ -20) >30 (Typ 52)
K, L, S
K, L, S
E, L
LT, UA
LT, UA
LT, UA
3030, 3130, 3131
UGx3134
-40 to 50
-50 to 40
5 to 55
Typ 20
A3260x <30 (Typ 10) >-30 (Typ -10)
E, L
LH, LT, UA
2 wire, chopper stabilized
Notes: 1) Typical data is at T = +25°C and nominal operating voltage.
A
2) “x” = Operating Temperature Range [suffix letter or (prefix)]: S (UGN) = -20°C to +85°C, E = -40°C to +85°C,
J = -40°C to +115°C, K (UGS) = -40°C to +125°C, L (UGL) = -40°C to +150°C.
www.allegromicro.com
7
3121, 3122, AND 3123
HALL-EFFECT SWITCHES
FOR HIGH-TEMPERATURE
OPERATION
The products described herein are manufactured under one or more
of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283;
5,389,889; 5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719;
5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents
pending.
Allegro MicroSystems, Inc. reserves the right to make, from time to
time, such departures from the detail specifications as may be required
to permit improvements in the performance, reliability, or
manufacturability of its products. Before placing an order, the user is
cautioned to verify that the information being relied upon is current.
Allegro products are not authorized for use as critical components
in life-support appliances, devices, or systems without express written
approval.
The information included herein is believed to be accurate and
reliable. However, Allegro MicroSystems, Inc. assumes no responsibil-
ity for its use; nor for any infringements of patents or other rights of
third parties that may result from its use.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
8
相关型号:
©2020 ICPDF网 联系我们和版权申明