440F-E0510S10 [ALLEN-BRADLEY]
Safety Edges; 安全边型号: | 440F-E0510S10 |
厂家: | Allen-Bradley |
描述: | Safety Edges |
文件: | 总9页 (文件大小:190K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Specifications
Standards
EN1760-2, EN 954-1, ISO13849-1,
IEC/EN60204-1, ANSI B11.19,
AS 4024.5
Approvals
CE marked for all applicable directives,
cULus and TÜV, c-tick not required
Power supply
Operates on 4V DC supplied from
control unit
Operating temperature
EPDM material -5°C to +55°C (23°F to 131°F)
NBR/CR material 0°C to + 55°C (32°F to 131°F)
Humidity
90% RH
Enclosure Protection
Conductor Size
Materials
IP67 (NEMA 6P)
(18AWG)
Description
The ability of the Safedge profile to out perform competition lies in
its innovative design. It uses a combination of non conductive
rubber and flexible wire cored conductive rubber bonded together
so it keeps bouncing back into shape even after repeated
compressions.
EPDM Ethylene Propylene Diene Modified
Rubber
NBR/CR Acrylonitrile (34% nitrile) Butadiene
Rubber/Chloropriene Rubber
Mounting
Weight
Any position using Type C112 “C” rail
See Ordering Details
The Safedge profiles come in 3 different cushions factors: 5mm
(0.2in), 19mm (0.75in) and 41mm (1.6in). Cushion factor is the
distance the profile can be depressed after a signal has been
generated. The profiles are also offered with a sealing lip which is
designed to reduce drafts between the profile and opposing surface.
Chemical Resistance of Safedge Profile
Resistance—“S”
Profile EPDM
Resistance—“N”
Profile NBR/CR
Substance
Acetic Acid (10%)
Acetone
Good
Good
Good
Fair
The profiles come in two different materials. Use the EPDM
material in the presence of conductive fluids. The NBR/CR material
performs better in the presence of oils. Review the chemical
resistance chart to help make the best choice of material. If in doubt,
a small sample of the profile should be tested for chemical resistance
before a final selection is made.
Ammonium Hydroxide
(35%)
Good
Good
Benzene
Poor
Poor
Poor
Good
Good
Diesel Oil
Ethyl Alcohol (Ethanol)
Good
The Safedge profile has no rigid internal parts which can “break
through” or cause fatigue failures after prolonged use. The multi-
stranded copper wire core throughout the length of the strip insures
that there are no problems of resistance build up on long lengths.
Hydrochloric Acid
(10%)
Good
Good
Lubricating Oil
Nitric Acid (10%)
Petrol
Poor
Good
Poor
Good
Fair
Fair
Features
Silicone Fluids
Good
Good
Good
Good
Good
Good
Good
Good
Poor
Good
Good
Good
•
•
•
•
•
•
•
Various profiles
Conductive rubber technology
Up to 50m lengths
Aluminium, plastic or zinc coated steel, mounting rails
Rubber boot optional
Active corners
Sodium Chloride (25%)
Trichlorethylene
Vegetable Oils (general)
Water (distilled)
Water (sea)
Sealing lip available
2-94
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Product Selection—Profiles
Code
Length—
(Page 2-100)
Dim ension
Profile
Description
Cushion Factor
m (ft)
Catalogue Num ber
440F-E0110S05
28.5 (1.12)
5 (16.4)
Black, EPDM,
Weight: 463g/m
(0.33lbs/ft)
A
0110S
5mm
440F-E0110S10
10 (32.8)
20 (65.6)
5 (16.4)
24.5
(0.96)
440F-E0110S20
440F-E0110N05
28.5 (1.12)
Black, NBR/CR,
Weight: 460g/m
(0.31lbs/ft)
440F-E0110N10
10 (32.8)
20 (65.6)
5 (16.4)
C
B
0110N
0110R
5mm
5mm
24.5
(0.96)
440F-E0110N20
440F-E0110R05
440F-E0110R10
28.5 (1.12)
Red, EPDM,
Weight: 502g/m
(0.34lbs/ft)
10 (32.8)
20 (65.6)
24.5
(0.96)
440F-E0110R20
440F-E1610S05
5 (16.4)
10 (32.8)
20 (65.6)
Black, EPDM,
Weight: 843g/m
(0.57lbs/ft)
440F-E1610S10
440F-E1610S20
440F-E1610N05
E
F
1610S
1610N
19mm
19mm
5 (16.4)
10 (32.8)
20 (65.6)
Black, NBR/CR,
Weight: 837g/m
(0.56lbs/ft)
440F-E1610N10
440F-E1610N20
440F-E0310S05
440F-E0310S10
5 (16.4)
Black, EPDM,
Weight: 1209g/m
(0.81lbs/ft)
10 (32.8)
H
0310S
0510S
41mm
5mm
20 (65.6)
5 (16.4)
10 (32.8)
20 (65.6)
5 (16.4)
440F-E0310S20
440F-E0510S05
440F-E0510S10
Black, EPDM, with
Sealing Lip
Weight: 545g/m
(0.37lbs/ft)
D, J
440F-E0510S20
440F-E0804S05
Black, EPDM, with
Sealing Lip
Weight: 1013g/m
(0.68lbs/ft)
440F-E0804S10
440F-E0804S20
G, K
0804S
19mm
10 (32.8)
20 (65.6)
2-95
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Product Selection—Profiles
Code
(Page 2-100)
Length—
m (ft)
Dim ension
Profile
Description
Cushion Factor
Catalogue Num ber
440F-E0210S05
5 (16.4)
10 (32.8)
20 (65.6)
Black, EPDM, with
Sealing Lip
Weight: 1291g/m
(0.87lbs/ft)
440F-E0210S10
440F-E0210S20
I, L
0210S
41mm (1.61in)
440F-E0118S05
440F-E0118S10
440F-E0118S20
5 (16.4)
10 (32.8)
20 (65.6)
Black, EPDM
Weight: 242g/m
(0.163lbs/ft)
M
0118S
1111S
3.75mm (0.15in)
18 (0.71)
50 (1.97)
440F-E1111S05
440F-E1111S10
440F-E1111S20
5 (16.4)
10 (32.8)
20 (65.6)
Black, EPDM
Weight: 680g/m
(0.457lbs/ft)
N, O
NA
2-96
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Product Selection—“C” Rails
Code
Dim ension—m m (inches)
Description
Catalogue Num ber
Aluminium type; Type C112/A
Suitable for all profiles.
3m (9.8ft) length
10
(0.39)
A
440F-R1212
440F-R1112
25 (0.98)
25 (0.98)
25 (0.98)
25 (0.98)
Weight: 258g/m (0.17lbs/ft)
Zinc-Coated Steel; Type C112/S
Suitable for all profiles
2m (6.5ft) length
Weight: 663g/m (0.45lbs/ft)
10
(0.39)
B
C
D
E
PVC Black; Type C112/PB
Suitable for all profiles
3m (9.8ft) length
10
(0.39)
440F-R1212PB
440F-R1212PR
440F-R1212PY
Weight: 111g/m (0.07lbs/ft)
PVC Red; Type C112/PR
Suitable for all profiles
3m (9.8ft) length
10
(0.39)
Weight: 111g/m (0.07lbs/ft)
PVC Yellow; Type C112/PY
Suitable for all profiles
3m (9.8ft) length
10
(0.39)
25 (0.98)
25 (0.98)
Weight: 111g/m (0.07lbs/ft)
Aluminium Vertical Lip; Type C112/
A2
10
(0.39)
F
Suitable for all profiles
2m (6.5ft) length
Weight: 368g/m (0.25lbs/ft)
440F-R1214
440F-R1215
20 (0.79)
Aluminium Horizontal Lip;
Type C112/A3
Suitable for all profiles
2m (6.5ft) length
10
(0.39)
G
25 (0.98) 25 (0.98)
Weight: 388g/m (0.26lbs/ft)
Aluminium Deep Channel;
Type C112/A4
Suitable for all profiles
2m (6.5ft) length
18
(0.71)
H
I
440F-R1216
440F-R1219
25 (0.98)
Weight: 345g/m (0.23lbs/ft)
Aluminium;
Suitable for Mini Profile Only
2m (6.5ft) length
8.5
(0.33)
18 (0.71)
45 (1.77)
Weight: 150g/m (___lbs/ft)
Aluminium
Suitable for Rubber Boot Only
?m (ft) length
J
440F-R2151
440F-R2152
13
(0.51)
Weight: 667g/m (0.448lbs/ft)
45 (1.77)
Aluminium
End Plate for C-Rail Option J
2 Plates
10
(0.4)
NA
4 Screws, flat head, Philips, 10mm,
#6, Weight: 7g (0.01lbs)
2-97
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Product Selection—Component Parts
Dim ension
Nam e
Description
Catalogue Num ber
440F-A1301
1m
2m
440F-A1302
5m
440F-A1305
Connector and Cable
12m
440F-A1306
15m
440F-A1307
6kΩ (yellow) resistor for series
440F-A1308
termination
Te r m i nato r
15kΩ (blue) for parallel termination
440F-A1309
440F-A1302S
440F-A1302N
440F-A1303S
Closing Cap material: EPDM
Closing Cap material: NRB
Closing Cap
To close profiles
440F-E0310S and 440F-E1610S.
Closing Cap
To close profiles
440F-E1610N.
440F-A1303N
440F-A0061S
440F-A0004
With this connector you can directly
connect two profiles. Suitable for
440F-E0110S and 440F-E0110R profiles.
Axial Connector
Straight Pin
Connector
Kit contains one pair of pins
suitable for one joint.
When using profile 440F-E0110S select
When using profile 440F-E0110R select
When using profile 440F-E0110N select
When using profile 440F-E0310S select
When using profile 440F-E1610S select
When using profile 440F-E1610N select
When using profile 440F-E0110N select
440F-A0071S
440F-A007IS
440F-A007IN
440F-A0073S
440F-A0074S
440F-A0074N
440F-A0072N
90° Corner
Connector
When using profile 440F-E0110S or
440F-E0110R select
440F-A0072S
90° Corner
440F-A0075N
440F-A0075S
440F-A0076S
When using profile 440F-E1610N select
When using profile 440F-E1610S select
When using profile 440F-E0310S select
Connector (vertical)
45° Corner
Connector
When using profile 440F-E0110N
When using profile 440F-E0110N
440F-A0071N45
440F-A0071N60
60° Corner
Connector
2-98
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Product Selection—Component Parts
Dim ension
Nam e
Description
Catalogue Num ber
440F-A1181
Use only on Mini Profile—1m
Use only on Mini Profile—3m
Use only on Mini Profile—5m
Connector and Cable
Te r m i nato r
440F-A1183
440F-A1185
Use only on Mini Profile—
8kΩ (yellow) resistor for series termination
440F-A1186
Use only on Mini Profile—
Closing Cap material: EPDM
440F-A1318
440F-A0020
440F-A3084
440F-A0116
Closing Cap
Cyanocrylate Adhesive
Shears
Contents: 3g. Sufficient for approximately
10 terminations.
Use to cut profiles.
Polycarbonate housing 53mm X 53mm X 35mm
complete with two pole terminal and
trumpet type screw on connector with strain
and relief clamp. For use with coiled cable
Connection Box
2.5m (8.2ft) (extended) of flexible coiled cable.
3.5m (11.5ft) (extended) of flexible coiled cable.
440F-A2450
440F-A2700
Coiled Connection
Cable
Control Unit
Connection Box
Example application of profile using coiled cable. The
coiled cable can not be directly connected to the profile
due to the weight of the cable. The proper use of the coiled
cable is to connect the coiled cable to the profile through
the connection box. The coiled cable should be secured to
both the moving and stationary objects so as to prevent
straining of the terminal connections.
Coiled
Cable
Closing
Cap
Connection Box
“C” Rail
Connector
with Resistor
Closing
Cap
Cable
Connector
2-99
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Factory Assembled Product Selection (standard
profile)
d (continued)
Cable Entrance
Code
Description
440F-E ➊
C
a
A
b
M
c
V
d
01270
J
K
L
RHT right entrance with 10m cable
SET straight entrance with 1m cable
SET straight entrance with 2m cable
SET straight entrance with 3m cable
SET straight entrance with 5m cable
SET straight entrance with 10m cable
UNDER entrance with 1m cable
UNDER entrance with 2m cable
UNDER entrance with 3m cable
UNDER entrance with 5m cable
UNDER entrance with 10m cable
e
a
M
N
O
P
Profile
Code
Description
0110S
A
B
C
D
E
F
0110R
Q
R
S
0110N
0510S with Sealing Lip on Right Side
1610S
T
1610N
G
H
I
0804S with Sealing Lip on Right Side
0310S
e
Te r m i n a t i o n
0210S with Sealing Lip on Right Side
0510S with Sealing Lip on Left Side
0804S with Sealing Lip on Left Side
0210S with Sealing Lip on Left Side
Rubber Boot over 0110S
Rubber Boot over 1610S
Code
A
B
Description
J
LHT left exit with 1m cable
LHT left exit with 2m cable
LHT left exit with 3m cable
LHT left exit with 5m cable
LHT left exit with 10m cable
RHT right exit with 1m cable
RHT right exit with 2m cable
RHT right exit with 3m cable
RHT right exit with 5m cable
RHT right exit with 10m cable
SET straight exit with 1m cable
SET straight exit with 2m cable
SET straight exit with 3m cable
SET straight exit with 5m cable
SET straight exit with 10m cable
UNDER exit with 1m cable
UNDER exit with 2m cable
UNDER exit with 3m cable
UNDER exit with 5m cable
UNDER exit with 10m cable
Parallel Termination—15kΩ
Series Termination—6kΩ
K
L
N
O
C
D
E
F
b
G
H
I
“C” Rail
Code
Description
A
B
C
D
E
F
1212 aluminium for “Profile” codes A-L
J
1112 zinc coated steel for “Profile” codes A-L
1212PB PVC black for “Profile” codes A-L
1212PR PVC red for “Profile” codes A-L
K
L
M
N
O
P
1212PY PVC yellow for “Profile” codes A-L
1214 aluminium with vertical lip for “Profile” codes A-L
1215 aluminium with horizontal lip for “Profile” codes A-L
1216 aluminium deep rail for “Profile” codes A-L
2151 aluminium for “Profile” codes N and O
No C-Rail (not needed)
G
H
J
Q
R
N
S
c
T
Cable Entrance
U
V
Code
Description
A
B
C
D
E
F
LHT left entrance with 1m cable
LHT left entrance with 2m cable
LHT left entrance with 3m cable
LHT left entrance with 5m cable
LHT left entrance with 10m cable
RHT right entrance with 1m cable
RHT right entrance with 2m cable
RHT right entrance with 3m cable
RHT right entrance with 5m cable
RHT right entrance with 10m cable
SET straight entrance with 1m cable
SET straight entrance with 2m cable
f
Length of Edge
Code
5 digit number
Description
Enter length of edge in mm
for example: 50m=50000; 500mm=00500
300mm minimum
G
H
I
➊ Order controller separately. See page 2-104 for
selection details.
J
K
L
2-100
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Factory Assembled Product Selection
(mini-profile)
c
Cable Entrance
Code
Description
K
M
N
P
SET straight entrance 1m cable
SET straight entrance 3m cable
SET straight entrance 5m cable
UNDER entrance 1m cable
UNDER entrance 3m cable
UNDER entrance 5m cable
R
S
d
Te r m i n a t i o n
Code
Description
K
M
N
P
SET straight entrance 1m cable
SET straight entrance 3m cable
SET straight entrance 5m cable
UNDER entrance 1m cable
UNDER entrance 3m cable
UNDER entrance 5m cable
Series Termination—8kΩ
440F-E ➊
M
a
I
b
M
c
V
d
01270
e
R
S
a
V
Profile
Code
Description
e
M
0118S 3.75mm (0.15in) Cushion Factor Black, Mini Profile
Length
Code
5 digit number
Description
b
Enter length of edge in mm
for example: 50m=50000; 500mm=00500
300mm minimum
“C” Rail
Code
Description
I
1219 aluminium for “Profile” code M
No C-Rail (not needed)
N
➊ Order controller separately. See page 2-104 for
selection details.
2-101
Presence Sensing Safety Devices
Safety Edges
Safedge™ Profiles
Factory Assembled Examples
440F-EDFHV00490
V
F
Series Termination
Type 1214 Aluminum Rail
with Vertical Lip
440F-ECAKV01250
6KΩ
A
Type C112/A
Aluminum C Rail
H
RHT—Right Hand
Entrance with
3m Cable
V
Series Termination
6KΩ
D
C
Type 0510S Profile
Type 0110N
Oil Resistant Profile
1250 mm long
with Sealing Lip
490mm long
K
Note orientation of sealing
lip to cable entrance
SET Cable Entrance
with 1m Cable
This is single profile has a sealing lip and is 490mm long. The profile
is terminated with a Series Termination. A 3m cable enters into the
right hand side of the closing cap from a plastic surface mounted
controller. The profile is mounted on an aluminium rail with a vertical
lip for ease of mounting. The orientation of the sealing lip to the
vertical lip can be reversed by the user by sliding the profile out of
the C Rail, rotating the C Rail 180° and then re-inserting the profile
back into the C Rail.
This is a single oil resistant profile which is 1250mm long. The edge
is terminated with a Series Termination. A 1m cable enters straight
into the closing cap from a DIN-rail mounted controller. The profile is
mounted on a standard aluminium C rail.
440F-EBGCU03560
G
Type 1215 Aluminum Rail
with Horizontal Lip
440F-ECFGD01250
F
Type 1214 Aluminum Rail
with Vertical Lip
U
G
Parallel Termination
RHT—Right Hand
Entrance with 2m Cable
15KΩ
B
Type 0110R Profile
3560mm long
C
D
LHT—Entrance
with 3m Cable
LHT Cable Exit
5m
C
Type 0110N Oil Resistant Profile
1250mm long
This is a single oil resistant profile which is 1250mm long. The edge
is terminated with a 1m cable. A 1m cable enters straight into the
closing cap. The profile is mounted on a standard aluminium C rail. A
control unit is not included. This edge is intended to be used in series
with another length of edge which has a terminating resistor.
This is a red-coloured single profile which is 3560mm long. This
profile is part of a parallel profile system, for ease of mounting, as it
is terminated with a Parallel Termination. A 3m cable enters into the
left side of the closing cap from a plastic surface mount controller.
The profile is mounted on an aluminium C Rail with a horizontal lip
for ease of mounting. The horizontal lip can be reversed by the user
by sliding the profile out of the C Rail, rotating the C Rail and then
re-inserting the profile back into the C Rail. A separate catalogue
number must be entered for the other profile.
2-102
相关型号:
©2020 ICPDF网 联系我们和版权申明