P2814-A-08SR [ALSC]

160MHz, OTHER CLOCK GENERATOR, PDSO8, SOIC-8;
P2814-A-08SR
型号: P2814-A-08SR
厂家: ALLIANCE SEMICONDUCTOR CORPORATION    ALLIANCE SEMICONDUCTOR CORPORATION
描述:

160MHz, OTHER CLOCK GENERATOR, PDSO8, SOIC-8

时钟 光电二极管 外围集成电路 晶体
文件: 总8页 (文件大小:209K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PRELIMINARY Specification  
P2811/12/14  
Alliance Semiconductor  
Low Power EMI Reduction IC  
FEATURES  
·
Low inherent cycle-to-cycle jitter  
8 spread % selections: +/-0.625% to –3.5%  
3.3V operating voltage  
·
·
·
FCC approved method of EMI attenuation  
·
·
·
·
Provides up to 15 dB EMI Reduction  
Generates 1X, 2X, and 4X low EMI spread  
spectrum clock of the input frequency  
1X: P2811, 2X: P2812, 4X: P2814  
CMOS/TTL compatible inputs and outputs  
Ultra low power CMOS design  
TBD mA @3.3V, 10 MHz  
TBD mA @3.3V, 27 MHz  
TBD mA @3.3V, 40MHz  
·
Optimized for input frequency range from  
10 MHz to 40 MHz  
P2811: 10 MHz to 40 MHz  
P2812: 10 MHz to 40 MHz  
P2814: 10 MHz to 40 MHz  
·
·
Products are available for Industrial  
Temperature Range  
·
·
Internal loop filter minimizes external  
components and board space  
Available in 8 pin SOIC and TSSOP  
Selectable spread options: Down Spread and  
Center Spread  
PRODUCT DESCRIPTION  
The P28XX is a versatile spread spectrum  
frequency modulator designed specifically for  
input clock frequencies from 10 MHz to 40 MHz  
(see Table 1). The P28XX can generate an EMI  
reduced clock from crystal, ceramic resonator, or  
system clock. The P28XX-A and -B offers various  
combinations of spread options and percentage  
deviations (see Table 2). These combinations  
include Down Spread, Center Spread and  
percentage deviation range from +/-0.625% to -  
3.50%.  
The P28XX modulates the output of a single PLL  
in order to “spread” the bandwidth of  
a
synthesized clock, thereby decreasing the peak  
amplitudes of its harmonics. This results in  
significantly lower system EMI compared to the  
typical narrow band signal produced by oscillators  
and most clock generators. Lowering EMI by  
increasing a signal’s bandwidth is called “spread  
spectrum clock generation”.  
The P28XX uses the most efficient and optimized  
modulation profile approved by the FCC and is  
implemented by using a proprietary all-digital  
method.  
The P28XX reduces electromagnetic interference  
(EMI) at the clock source, allowing a system wide  
EMI reduction for all the down stream clocks and  
data dependent signals.  
The P28XX allows  
APPLICATIONS  
significant system cost savings by reducing the  
number of circuit board layers, ferrite beads,  
shielding, and other passive components that are  
traditionally required to pass EMI regulations.  
The P28XX is targeted towards EMI management  
for memory interfaces in mobile graphic chipsets  
and high-speed digital applications such as PC  
peripheral devices, consumer electronics, and  
embedded controller systems.  
May, 2002  
Revision B  
PulseCore – A Division of Alliance Semiconductor  
3160 De La Cruz Blvd., Suite 200 • Santa Clara • CA • 95054  
Tel (408) 748-6988 • Fax (408) 748-0009  
http://www.pulsecore.com  
1 of 1  
PRELIMINARY Specification  
P2811/12/14  
Alliance Semiconductor  
Figure 1 - Pin Diagram  
1
2
3
4
8
7
6
5
XIN  
VSS  
D_C  
XOUT  
VDD  
FRS  
P2811-A/B  
P2812-A/B  
P2814-A/B  
SRS  
ModOut  
Figure 2 – P28XX Block Diagram  
VDD  
D_C SRS FRS  
PLL  
Modulation  
XIN  
Crystal  
Oscillator  
Frequency  
Divider  
Output  
Divider  
Phase  
Detector  
Loop  
Filter  
XOUT  
VCO  
Feedback  
Divider  
ModOUT  
P28XX Block Diagram  
VSS  
Table 1 - Input/Output Frequency Range Selections  
PIN 6  
Part Number  
P2812 (2X)  
Input Output Input  
P2811 (1X)  
P2814 (4X)  
Output Input Output  
FRS  
(MHz) (MHz)  
10-20 10-20  
20-40 20-40  
(MHz) (MHz)  
10-20 20-40  
20-40 40-80  
(MHz) (MHz)  
10-20 40-80  
20-40 80-160  
0
1
Apr., 2002  
Revision A  
PulseCore, a Division of Alliance Semiconductor  
3160 De La Cruz Blvd., Suite 200 • Santa Clara • CA • 95054  
Tel (408) 748-6988 • Fax (408) 748-0009  
2of 6  
http://www.pulsecore.com; http://www.alsc.com  
PRELIMINARY Specification  
P2811/12/14  
Alliance Semiconductor  
Table 2 - Output Frequency Deviation and Spread Option Selections  
PIN 3 PIN 4 Output Frequency Modulation  
Part  
Number  
D_C  
SRS Deviation and  
Spread Option  
Rate  
0
0
1
1
0
1
0
1
-2.50% (Down)  
-3.50% (Down)  
+/-1.25% (Center)  
+/-1.75% (Center)  
TBD KHz  
P2811/12/14-A  
0
0
1
1
0
1
0
1
-1.25% (Down)  
-1.75% (Down)  
+/-0.625% (Center)  
+/-0.875% (Center)  
TBD KHz  
P2811/12/14-B  
PIN DESCRIPTION  
PIN # Name  
Type Description  
1
2
3
XIN  
VSS  
D_C  
I
P
I
Connect to externally generated clock signal or crystal.  
Ground Connection. Connect to system ground.  
Digital logic input used to select Down (LOW) or Center (HIGH) Spread  
Options (see Table 2). This pin has an internal pull-up resistor.  
Spread Range Selection. Digital logic input used to select frequency  
deviation (see Table 2). This pin has an internal pull-up resistor.  
Spread Spectrum clock output (see Table 1 and Table 2).  
Frequency Range Selection. Digital logic input used to select input  
frequency range (see Table 1). This pin has an internal pull-up resistor.  
Connect to +3.3V  
4
SRS  
I
5
6
ModOut  
FRS  
O
I
7
8
VDD  
XOUT  
P
I
Connect to crystal. No connect if externally generated clock signal is  
used.  
May, 2002  
Revision B  
PulseCore – A Division of Alliance Semiconductor  
3160 De La Cruz Blvd., Suite 200 • Santa Clara • CA • 95054  
Tel (408) 748-6988 • Fax (408) 748-0009  
http://www.pulsecore.com  
3 of 3  
PRELIMINARY Specification  
P2811/12/14  
Alliance Semiconductor  
EMC SOFTWARE SIMULATION  
By using PulseCore’s proprietary EMC simulation software – EMI-lator®, radiated system level EMI analysis  
can be made easier, allowing quantitative measure on the benefits of PulseCore’s EMI reduction products.  
The simulation engine of this EMC software has already been characterized to correlate with the electrical  
characteristics of PulseCore EMI reduction IC’s. Figure 3 below is an example of the simulation result.  
Please visit our web site at www.pulsecore.com for information on how to obtain a free copy and  
demonstration of EMI-lator®.  
Figure 3 - Simulation Result from EMI-lator®  
May, 2002  
Revision B  
PulseCore – A Division of Alliance Semiconductor  
3160 De La Cruz Blvd., Suite 200 • Santa Clara • CA • 95054  
Tel (408) 748-6988 • Fax (408) 748-0009  
http://www.pulsecore.com  
4 of 4  
PRELIMINARY Specification  
P2811/12/14  
Alliance Semiconductor  
ABSOLUTE MAXIMUM RATINGS  
Symbol  
Parameter  
Rating  
Unit  
VDD, VIN  
Voltage on any pin with respect to GND  
-0.5 to +7.0  
V
TSTG  
TA  
Storage Temperature  
-65 to +125  
0 to +70  
ºC  
ºC  
Operating Temperature  
DC ELECTRICAL CHARACTERISTICS  
Symbol  
Parameter  
Min  
Typ  
Max  
Unit  
VIL  
VIH  
IIL  
Input Low Voltage  
Input High Voltage  
GND – 0.3  
-
-
-
TBD  
V
V
TBD  
-
VDD + 0.3  
TBD  
Input Low Current (pull-up resistor on inputs  
SR0, 1)  
mA  
IIH  
Input High Current (pull-down resistor on  
input SSON)  
XOUT Output Low Current  
(@ 0.4V, VDD = 3.3V)  
XOUT Output High Current  
(@ 2.5V, VDD = 3.3V)  
Output Low Voltage  
(VDD=3.3V, IOL = 20 mA)  
Output High Voltage  
(VDD=3.3V, IOH = 20 mA)  
Static Supply Current  
Standby Mode  
-
-
TBD  
mA  
mA  
mA  
V
IXOL  
IXOH  
VOL  
VOH  
IDD  
-
TBD  
TBD  
-
-
-
-
-
TBD  
-
TBD  
-
-
-
V
TBD  
mA  
mA  
ICC  
Dynamic Supply Current  
Normal Mode (3.3V and 10 pF loading)  
Operating Voltage  
TBD  
fIN-min  
TBD  
-
TBD  
fIN-typ  
3.3  
TBD  
fIN-max  
TBD  
-
VDD  
tON  
V
mS  
Power Up Time  
TBD  
(First locked clock cycle after power up)  
ZOUT  
Clock Output Impedance  
-
TBD  
-
W
AC ELECTRICAL CHARACTERISTICS  
Symbol  
Parameter  
Min  
Typ  
Max  
Unit  
fIN  
10  
10  
20  
40  
40  
40  
MHz  
MHz  
MHz  
MHz  
ns  
Input Frequency P2811/12/14  
Outout Frequency P2811  
Outout Frequency P2812  
Outout Frequency P2814  
-
fOUT  
-
80  
-
-
160  
tLH  
Output Rise Time  
TBD  
Note 1  
(measured at 0.8V to 2.0V)  
tHL  
Output Fall Time  
TBD  
ns  
Note 1  
tJC  
(measured at 2.0V to 0.8V)  
Jitter (cycle to cycle)  
-
-
TBD  
ps  
%
tD  
Output Duty Cycle  
TBD  
Note1: tLH and tHL are measured into a capacitive load of 15pF  
May, 2002  
Revision B  
PulseCore – A Division of Alliance Semiconductor  
3160 De La Cruz Blvd., Suite 200 • Santa Clara • CA • 95054  
Tel (408) 748-6988 • Fax (408) 748-0009  
http://www.pulsecore.com  
5 of 5  
PRELIMINARY Specification  
P2811/12/14  
Alliance Semiconductor  
Figure 4 - Mechanical Package Outline (8 Pin SOIC)  
C
L
INCHES  
MILLIMETERS  
SYMBOL MIN  
NOR MAX MIN NOR MAX  
P28xx-x  
LOT NUMBER  
YYWW  
0.057 0.064 0.071 1.45 1.63 1.80  
0.004 0.007 0.010 0.10 0.18 0.25  
0.053 0.061 0.069 1.35 1.55 1.75  
0.012 0.016 0.020 0.31 0.41 0.51  
0.004 0.006 0.001 0.10 0.15 0.25  
0.186 0.194 0.202 4.72 4.92 5.12  
0.148 0.156 0.164 3.75 3.95 4.15  
A
A1  
A2  
B
C
D
E
H
a
D
E
0.050 BSC  
1.27 BSC  
e
0.224 0.236 0.248 5.70 6.00 6.30  
0.012 0.020 0.028 0.30 0.50 0.70  
H
L
a
A
A2  
A1  
0°  
5°  
8°  
0°  
5°  
8°  
Note: Controlling dimensions are millimeters.  
B
e
Figure 5 - Mechanical Package Outline (8 Pin TSSOP)  
C
INCHES  
MILLIMETERS  
SYMBOL MIN  
NOR MAX MIN NOR MAX  
L
-
-
-
0.047  
0.006 0.05  
-
-
-
1.10  
0.15  
A
A1  
A2  
B
0.002  
H
0.031 0.039 0.041 0.80 1.00 1.05  
0.007  
0.004  
E
-
-
0.012 0.19  
0.008 0.09  
-
-
0.30  
0.20  
C
0.114 0.118 0.122 2.90 3.00 3.10  
0.169 0.173 0.177 4.30 4.40 4.50  
D
E
a
0.026 BSC  
0.65 BSC  
e
D
0.244 0.252 0.260 6.20 6.40 6.60  
0.018 0.024 0.030 0.45 0.60 0.75  
H
L
0°  
-
8°  
0°  
-
8°  
a
A
A2  
A1  
Note: Controlling dimensions are millimeters.  
B
e
May, 2002  
Revision B  
PulseCore – A Division of Alliance Semiconductor  
3160 De La Cruz Blvd., Suite 200 • Santa Clara • CA • 95054  
Tel (408) 748-6988 • Fax (408) 748-0009  
http://www.pulsecore.com  
6 of 6  
PRELIMINARY Specification  
P2811/12/14  
Alliance Semiconductor  
Ordering Information:  
X 2811-X- 08 XX  
Package  
ST=SOIC in Tube  
SR=SOIC in Tape and Reel  
TT=TSSOP in Tube  
TR=TSSOP in Tape and Reel  
Device Pin Count  
Deviation (%) and Spread Option Identifier  
Device Number  
Flow  
P=Commercial Temperature Range (0°C TO 70°C)  
I =Industrial Temperature Range (-25°C TO 85°C)  
Ordering  
Number  
Marking  
Input  
Output  
Frequency  
Package  
Type  
Qty. /  
Reel  
Temp.*  
(NOTE)  
Frequency Frequency Deviation  
(MHz)  
(MHz)  
P2811-A-08ST  
P2811-A-08SR  
P2811-A-08TT  
P2811-A-08TR  
P2811-A  
P2811-A  
P2811-A  
P2811-A  
10 – 40  
10 – 40  
8 SOIC  
TUBE  
8 SOIC  
TAPE/REEL  
8 TSSOP  
TUBE  
8 TSSOP  
TAPE/REEL  
0°C TO  
70°C  
0°C TO  
70°C  
0°C TO  
70°C  
0°C TO  
70°C  
-2.50%  
(Down)  
-3.50%  
(Down)  
+/-1.25%  
(Center)  
+/-1.75%  
(Center)  
10 – 40  
10 – 40  
10 – 40  
10 – 40  
10 – 40  
10 – 40  
2,500  
2,500  
P2811-B-08ST  
P2811-B-08SR  
P2811-B-08TT  
P2811-B-08TR  
P2811-B  
P2811-B  
P2811-B  
P2811-B  
10 – 40  
10 – 40  
10 – 40  
10 – 40  
10 – 40  
10 – 40  
10 – 40  
10 – 40  
8 SOIC  
TUBE  
8 SOIC  
TAPE/REEL  
8 TSSOP  
TUBE  
8 TSSOP  
TAPE/REEL  
0°C TO  
70°C  
0°C TO  
70°C  
0°C TO  
70°C  
0°C TO  
70°C  
-1.25%  
(Down)  
-1.75%  
(Down)  
+/-0.625%  
(Center)  
+/-0.875%  
(Center)  
2,500  
2,500  
P2812-A-08ST  
P2812-A-08SR  
P2812-A-08TT  
P2812-A-08TR  
P2812-A  
P2812-A  
P2812-A  
P2812-A  
10 – 40  
10 – 40  
10 – 40  
10 – 40  
20 – 80  
20 – 80  
20 – 80  
20 – 80  
8 SOIC  
TUBE  
8 SOIC  
TAPE/REEL  
8 TSSOP  
TUBE  
8 TSSOP  
TAPE/REEL  
0°C TO  
70°C  
0°C TO  
70°C  
0°C TO  
70°C  
0°C TO  
70°C  
-2.50%  
(Down)  
-3.50%  
(Down)  
+/-1.25%  
(Center)  
+/-1.75%  
(Center)  
2,500  
2,500  
P2812-B-08ST  
P2812-B-08SR  
P2812-B-08TT  
P2812-B-08TR  
P2812-B  
P2812-B  
P2812-B  
P2812-B  
10 – 40  
10 – 40  
10 – 40  
10 – 40  
20 – 80  
20 – 80  
20 – 80  
20 – 80  
8 SOIC  
TUBE  
8 SOIC  
TAPE/REEL  
8 TSSOP  
TUBE  
8 TSSOP  
TAPE/REEL  
-25°C TO  
85°C  
-25°C TO  
85°C  
-25°C TO  
85°C  
-25°C TO  
85°C  
-1.25%  
(Down)  
-1.75%  
(Down)  
+/-0.625%  
(Center)  
+/-0.875%  
(Center)  
2,500  
2,500  
May, 2002  
Revision B  
PulseCore – A Division of Alliance Semiconductor  
3160 De La Cruz Blvd., Suite 200 • Santa Clara • CA • 95054  
Tel (408) 748-6988 • Fax (408) 748-0009  
http://www.pulsecore.com  
7 of 7  
PRELIMINARY Specification  
P2811/12/14  
Alliance Semiconductor  
Ordering  
Number  
Marking  
Input  
Output  
Frequency  
Package  
Type  
Qty. /  
Reel  
Temp.*  
(NOTE)  
Frequency Frequency Deviation  
(MHz)  
(MHz)  
P2814-A-08ST  
P2814-A-08SR  
P2814-A-08TT  
P2814-A-08TR  
P2814-A  
P2814-A  
P2814-A  
P2814-A  
10 – 40  
40 – 160  
8 SOIC  
TUBE  
8 SOIC  
TAPE/REEL  
8 TSSOP  
TUBE  
8 TSSOP  
TAPE/REEL  
0°C TO  
70°C  
0°C TO  
70°C  
0°C TO  
70°C  
0°C TO  
70°C  
-2.50%  
(Down)  
-3.50%  
(Down)  
+/-1.25%  
(Center)  
+/-1.75%  
(Center)  
10 – 40  
10 – 40  
10 – 40  
40 – 160  
40 – 160  
40 – 160  
2,500  
2,500  
P2814-B-08ST  
P2814-B-08SR  
P2814-B-08TT  
P2814-B-08TR  
P2814-B  
P2814-B  
P2814-B  
P2814-B  
10 – 40  
10 – 40  
10 – 40  
10 – 40  
40 – 160  
40 – 160  
40 – 160  
40 – 160  
8 SOIC  
TUBE  
8 SOIC  
TAPE/REEL  
8 TSSOP  
TUBE  
8 TSSOP  
TAPE/REEL  
0°C TO  
70°C  
0°C TO  
70°C  
0°C TO  
70°C  
0°C TO  
70°C  
-1.25%  
(Down)  
-1.75%  
(Down)  
+/-0.625%  
(Center)  
+/-0.875%  
(Center)  
2,500  
2,500  
"Licensed under U.S. Patent Nos. 5,488,627 and 5,631,920"  
May, 2002  
Revision B  
PulseCore – A Division of Alliance Semiconductor  
3160 De La Cruz Blvd., Suite 200 • Santa Clara • CA • 95054  
Tel (408) 748-6988 • Fax (408) 748-0009  
http://www.pulsecore.com  
8 of 8  

相关型号:

P2814-A-08ST

160MHz, OTHER CLOCK GENERATOR, PDSO8, SOIC-8
ALSC

P2814-A-08TR

160MHz, OTHER CLOCK GENERATOR, PDSO8, TSSOP-8
ALSC

P2814A

Low Power EMI Reduction IC
ONSEMI

P2814A-08SR

Low-Power EMI Reduction IC
ALSC

P2814A-08SRF

Clock Generator, 160MHz, CMOS, PDSO8, SOIC-8
ALSC

P2814A-08ST

Low-Power EMI Reduction IC
ALSC

P2814A-08TR

Low-Power EMI Reduction IC
ALSC

P2814A-08TRF

Clock Generator, 160MHz, CMOS, PDSO8, TSSOP-8
ALSC

P2814A-08TT

Low-Power EMI Reduction IC
ALSC

P2814AF-08SR

Low-Power EMI Reduction IC
ALSC

P2814AF-08ST

Low-Power EMI Reduction IC
ALSC

P2814AF-08TR

Low-Power EMI Reduction IC
ALSC