CA801/2-3 [ALTECH]
Terminal Blocks Insul Jmpr for alter 8mm Insulated;
| 型号： | CA801/2-3 |
| 厂家： | 
ALTECH CORPORATION |
| 描述： | Terminal Blocks Insul Jmpr for alter 8mm Insulated |
| 文件： | 总136页 (文件大小：29991K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial
control components. Headquartered in Flemington, NJ,Altech has an experienced staff of engineering,
manufacturing and sales personnel to provide the highest quality products with superior service. This
is the Altech Commitment!
With experienced Product Engineers and Customer Service personnel, Altech provides solutions to
your most pressing application challenges. All with one thought in mind - to ensure that we solve your
problem the first time!
Altech’s Commitment
Altech’s Automation and Control components meet appli-
cable national and international standards, such as UL,
NEC, CSA, IEC and VDE. Altech provides these products
with superior customer service and delivery through a ISO
9001 Quality Management system, which stresses continu-
ous process improvement. We perform these services with
honesty and integrity. All Altech employees are trained in
this Quality Management System and are dedicated to
achieve these goals. Altech’s quality system has been ISO
approved since 1999.
DIN RAIL TERMINAL BLOCKS
TABLE OF CONTENTS
Spring Clamp Terminal Blocks
Introduction ..........................................................62
Selection Guide....................................................63
CX Series
• Single Level Feed Through..........................64-65
• Multi Connection ..........................................65-67
• Ground/ Earth...............................................68-70
• Double Level .....................................................71
• Electronic Component..................................72-73
• 5x20mm/ 5x25mm Fuse....................................74
• Component Carrier............................................75
• Disconnect.........................................................76
• Side Entry..........................................................77
• Pluggable ..........................................................78
• Hybrid Distribution.............................................79
Screw Clamp Terminal Blocks
Introduction ............................................................4
Selection Guide......................................................5
Feed Through Terminal Blocks
• Single Level......................................................6-8
• Multi Connection..................................................9
• Double Level ................................................10-13
• Triple Level...................................................14-15
• Ground/ Earth...............................................16-17
Angular Terminal Blocks
• Feed-Through....................................................80
• Multi-Connection ...............................................81
• Multi-Level....................................................82-83
• Ground/ Earth...............................................84-85
Accessories Spring Terminal Blocks............86-87
Mini/ Panel Mount Terminal Blocks
Introduction/ Selection Guide.............................88
Fuse Terminal Blocks
Screw Clamp Terminal Blocks
• 5x20mm/ 5x25mm Fuse...............................18-19
• Double Level Fuse Terminal.........................20-21
• 6.35x25.4mm (¼” x 1”) Fuse.............................22
• Component Carrier............................................23
• Fuse Holder..................................................24-25
• 15mm Mini Rail..................................................89
• Panel Mount ......................................................90
Spring Clamp Terminal Blocks
• 15mm Mini Rail..................................................91
• Panel/ DIN Rail Mount.......................................92
• Micro Panel Mount ............................................93
High Temperature Ceramic ................................94
Disconnect & Test Terminal Blocks
• Slider Style.............................................26-27, 30
• Blade Style...................................................28-29
• Lever Style ........................................................31
Terminal Strips – Eurostrip® Style
Introduction/ Selection Guide.............................95
• 300V Flat Base, Feed Through....................96-97
• 600V Standoff Feet, Feed Through..............98-99
• Pluggable .................................................100-101
• Middle Barrier, Feed Through ..................102-103
• Accessories Terminal Strips .....................104-105
Power Distribution Terminal Blocks
• Multi I/O........................................................32-34
• Hybrid Spring/ Screw.........................................35
• Distribution / Grounding System........................36
Special Application Terminal Blocks
• 1000V High Voltage...........................................37
• Thermocouple ...................................................38
• Tab Connection .................................................39
• Spring Loaded..............................................40-41
• Electronic Components................................42-47
Mounting & Marking – Accessories
• DIN Rail....................................................106-107
• Support Brackets/ Mounting Clips...................108
• End Stops........................................................109
• Group Identification Markers............................110
• Marking Tags/ Warning Labels.........................111
• Plotter & Marking System .........................112-113
Accessories Screw Terminal Blocks.............48-49
Stud/ Ring Lug Terminal Blocks
Ferrules
Introduction ..........................................................50
Selection Guide....................................................51
• Ring Lug Barrier Terminal Blocks.................52-53
• Ring Lug Stud Terminal Blocks ....................54-55
• Ring Lug Hinge Terminal Blocks ..................56-57
• Ring Lug Power Terminal Blocks..................58-59
• High Current Power Terminal Blocks.................60
• Accessories Stud/ Ring Lug Terminal Blocks ...61
Introduction .................................................114-115
• UL Ferrules ...............................................116-117
• Crimping Tools (UL Ferrules)....................118-120
• DIN Standard Ferrules .............................120-124
• Crimping Tools (DIN Ferrules)..................125-127
INDEX...........................................................128-133
TERMS & CONDITIONS .....................................134
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
3
OVERVIEW
INTRODUCTION
SCREW TERMINAL BLOCKS
SCREW CLAMP CONNECTION TECHNOLOGY
• Maximum wiring efficiency and reliability
• Designed for most stringent requirements
• Simple connection with standard flat head
screwdriver
• Supplied with open clamps ready to accept wires
• No wire preparation necessary (with/ without ferrule)
• Vibration resistant/ Gas-tight connection
• For very larger wire sizes (up to 250 kcmil)
E220514
60947-7-1
MATERIAL SPECIFICATIONS
Current Carrying Metal
Corrosion free material
Terminal Block Housing
• Polyamide PA66 Housing
• Self-extinguishing
Polyamide 66 Specifications
Upper Temperature Limit: 105°C
Lower Temperature Limit: -50°C
sing
ew
rent Bar
minal Clamp
• Clamp: zinc chromate
passivated steel
• Screw: zinc chromate
passivated steel
Flammability UL94:
Volume Resistivity:
Surface Resistivity:
V2/ V0
• High mechanical strength
1012 Ω cm
1010 Ω
• Current Bar: nickel plated
copper alloy / tin plated
copper
INSTALLATION GUIDELINES
Secure
Connection
1
2
3
1 Insert Wire into open clamp
2 Tighten screw to specified torque
3 Remove Screwdriver, screw terminal is closed
with locking feature for a reliable/ safe connection
SCREW CLAMP ACCESSORIES AND FEATURES
Shorting
Screw
Isolated
Internal
Jumper
Current Bar
Internal
Jumper
Shorting
Sleeve
Separator
Plate
End Plate
Isolation
Partition
DIN Rail
External Jumper
Marking Tags
End Stop
4
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
OVERVIEW
SELECTION GUIDE
SCREW TERMINAL BLOCKS
Feed Through Terminal Blocks
• Up to 240A
• Multi-Connection Terminals
• Double Level Terminal
• Triple Level Terminals
• Ground Blocks
Feed Through
Multi-Connection
Double Level
Triple Level
Ground / Earth
• Wide range of accessories
• All standard colors
page 6-8
page 9
page 10-12 page 14-15 page 16-17
Fuse Terminal Blocks
• 1/4" x 1" Fuse Terminal Blocks
• 5x20mm/ 5x25mm Fuse Terminal Blocks
• Double level versions
• Component Carrier for flexible requirements
• 10x38, CC, J-Type Fuse Holder
5x20mm / 5x25mm
CF4U / CF4SP
Double Lever
DDFL4U
1/4”x1”
CAFL4U
Component Carrier
CCC4U
Fuse Holder
page 18-19 page 20-21
page 22
page 23
page 24-25
Disconnect & Test Terminal Blocks
• Slider Style
• Blade/ Knife Style
• Lever Style
• Accessories and matching Feed Through terminals
Slider Style
CDS6U
Blade Style
CKT4U
Blade Style
CKT4SP
Slider Style
CDTTU
Lever Style
CSDL4U
page 26-27
page 28
page 29
page 30
page 31
Power Distribution Terminal Blocks
• Various I/O configurations
• Up to 150A
• Compact Hybrid Distribution Block
CDB Series
CMDB Series
Hybrid CXDB Series Distribution/Grounding
page 32-33
page 34
page 35
page 36
Special Application Terminal Blocks
• Spring Loaded Terminals for high vibration
applications
• 1000V High Voltage Terminals
• Thermocouple Terminals
• Tab Connection Terminals
• Electronic Components Terminals
1000V High Voltage Thermocouple
Tab Connection
Spring Loaded
USC Series
Electronic
Components
CHV Series
CTT2.5U Series
CTC Series
page 37
page 38
page 39
page 36-37 page 42-47
Accessories
• Internal Jumpers (Uninsulated, Insulated)
• Endplates
• Partition/ Separator Plates
• Protective Covers
• End Stops
Jumpers
Endplates, Separators, End Stops, Covers, etc.
page 48
page 49
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
5
FEED-THROUGH
SINGLE LEVEL TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CTS2.5U-N
CTS4U-N
CTS6U
HIGHLIGHTS
FEATURES
Dimensions & Weight
Width
• Altech CTS Series of
Universal Screw Terminal
Blocks featuring global
standards
• Universal mounting foot for
easy snap onto common
DINꢀrail profiles
5 mm
6 mm
8 mm
Length
43 mm
43 mm
43 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
46.2 mm
53.7 mm
46.2 mm
53.7 mm
47.8 mm
55.5 mm
Weight per piece
6.2 g
7.6 g
13.5 g
Technical Data/Ratings
• Screw-type jumper system
• Current Ratings up to 240A
Approvals
AEx ell
Ex ell U
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-12 AWG
0.2-2.5 mm2
1000V AC/DC
24 A
22-10 AWG
0.2-4 mm2
1000V AC/DC
32 A
22-8 AWG
0.5-6 mm2
1000V AC/DC
41 A
APPLICATIONS
600 V
25 A
600 V
35 A
600 V
50 A
• Ex & IECEx approvals for
use in potentially explosive
areas
7lb-in
0.4Nm
7lb-in
0.5Nm
14lb-in
0.8Nm
• Control, Automation
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
applications
• Power Distribution
nstallation Instructions
Wire Stripping Length
Screwdriver
8 mm
8 mm
9 mm
Flat Head 0.5 x 3.0 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.8 x 4.0 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CTS2.5U-N
100
100
100
100
100
100
100
100
CTS4U-N
100
100
100
100
100
100
100
100
CTS6U
100
100
100
100
100
100
100
100
Red
R
CTS2.5U-N/R
CTS2.5U-N/BU
CTS2.5U-N/BL
CTS2.5U-N/O
CTS2.5U-N/G
CTS2.5U-N/Y
CTS2.5U-N/W
CTS4U-N/R
CTS4U-N/BU
CTS4U-N/BL
CTS4U-N/O
CTS4U-N/G
CTS4U-N/Y
CTS4U-N/W
CTS6U/R
CTS6U/BU
CTS6U/BL
CTS6U/O
CTS6U/G
CTS6U/Y
CTS6U/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
EP6/10U
Std. Pk.
50
Accessories
End Plate
Mounting Handle
Mounting handle is used
for mounting 10 terminal
blocks on a DIN rail, thus
saving considerable time.
Specially designed pins in
the mounting handle grip
the terminal blocks when
pressed against entry.
EP2.5/4UN
EP2.5/4UN
Partition Plate
Separator Plate
DIN Rail
PP2.5/4UN
SP2.5/4UN
50
PP2.5/4UN
SP2.5/4UN
50
PP6/10U
SP6/10U
50
100
100
100
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
Cat. No. Terminal Block Std. Pk.
MH2.5 CTS2.5U-N
MH4 CTS4U-N
1
1
2 pole
3 pole
nternal Jumper
CA721/2
CA721/3
CA721/4
CA721/10
CA721/100
100
100
100
10
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
50
10
10
CA723/2
CA723/3
CA723/4
CA723/10
–
100
50
50
10
–
4 pole
10 pole
100 pole
10
2 pole
3 pole
Insulated
Internal Jumper
CA741/2
CA741/3
CA741/4
CA741/10
CA741/100
100
100
100
10
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
CA743/2
CA743/3
CA743/4
CA743/10
–
100
50
50
10
–
4 pole
10 pole
100 pole
10
10
2 pole
3 pole
External Jumper
CA717/2
CA717/3
CA717/4
CA717/10
100
100
100
20
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
CA710/2
CA710/3
CA710/4
CA710/10
100
50
4 pole
50
10 pole
20
Test Socket
Marking Tag
CA707/TS/01
MT5
100
CA707/TS/01
100
CA707/TS/05
100
1 Pk. (100 tags) MT6
1 Pk. (100 tags) MT8
1 Pk. (100 tags)
6
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
FEED-THROUGH
SINGLE LEVEL TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CTS10U
CTS16U
CTS25UN
CTS35UN
Dimensions & Weight
10 mm
Width
12 mm
12 mm
16 mm
43 mm
Length
43 mm
49 mm
50.5 mm
47.8 mm
55.5 mm
47.8 mm
55.5 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
57.2 mm
64.7 mm
59.2 mm
66.7 mm
16.5 g
Weight per piece
25.5 g
35.5 g
50.5 g
Technical Data/Ratings
Approvals
AEx ell
Ex ell U
60947-7-1
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
16-6 AWG 22-6 AWG 0.5-10 mm2
20-4 AWG 22-6 AWG 0.2-16 mm2
14-2 AWG
4-25 mm2
12-1/0 AWG
4-35 mm2
1000V AC/DC
125 A
600 V
65 A
600 V 1000V AC/DC
600 V
85 A
600 V 1000V AC/DC
600 V
105 A
30lb-in
1000V AC/DC
101 A
600 V
150 A
50lb-in
65 A
57 A
70 A
76 A
14 lb-in 14 lb-in
Polyamide 66
1.2Nm
14 lb-in 14 lb-in
Polyamide 66
1.2 Nm
2.0Nm
2.5Nm
Insulation Material
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
11 mm
Flat Head 0.8 x 4.0 mm
12 mm
Flat Head 1.0 x 5.5 mm
14 mm
15 mm
Flat Head 1.0 x 5.5 mm
Flat Head 1.0 x 5.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
TS10U
100
100
100
100
100
100
100
100
Grey (standard)
CTS16U
50
50
50
50
50
50
50
50
CTS25UN
50
50
50
50
50
50
50
50
CTS35UN
50
50
50
50
50
50
50
50
TS10U/R
TS10U/BU
TS10U/BL
TS10U/O
TS10U/G
TS10U/Y
TS10U/W
Red
R
CTS16U/R
CTS16U/BU
CTS16U/BL
CTS16U/O
CTS16U/G
CTS16U/Y
CTS16U/W
CTS25UN/R
CTS25UN/BU
CTS25UN/BL
CTS25UN/O
CTS25UN/G
CTS25UN/Y
CTS25UN/W
CTS35UN/R
CTS35UN/BU
CTS35UN/BL
CTS35UN/O
CTS35UN/G
CTS35UN/Y
CTS35UN/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EP6/10U
Std. Pk.
50
Cat. No.
–
Std. Pk.
–
Cat. No.
–
Std. Pk.
–
Cat. No.
–
Std. Pk.
–
Accessories
End Plate
PP6/10U
SP6/10U
50
Partition Plate
Separator Plate
DIN Rail
–
–
PP25UN
–
50
–
PP35UN
–
50
–
100
SP6/10U
100
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
CA702
CA802
CA202
50
50
25
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
2 pole
3 pole
CA724/2
CA724/3
CA724/4
CA724/10
–
100
50
50
10
–
Internal Jumper
CA751/2
CA751/3
CA751/4
CA751/10
CA751/100
50
50
50
10
10
CA725/2
CA725/3
CA725/4
CA725/10
CA725/100
50
20
20
10
10
CA771/2
CA771/3
CA771/4
CA771/10
–
50
20
20
10
–
4 pole
10 pole
100 pole
2 pole
3 pole
CA744/2
CA744/3
CA744/4
CA744/10
–
100
50
50
10
–
Insulated
Internal Jumper
CA761/2
CA761/3
CA761/4
CA761/10
CA761/100
100
50
50
10
10
CA745/2
CA745/3
CA745/4
CA745/10
CA745/100
50
20
20
10
10
CA781/2
CA781/3
CA781/4
CA781/10
–
50
20
20
10
–
4 pole
10 pole
100 pole
2 pole
3 pole
CA718/2
CA718/3
CA718/4
CA718/10
100
50
External Jumper
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4 pole
50
10 pole
20
CA707/TS/05
MT10
100
Test Socket
Marking Tag
CA707/TS/05
MT12
100
CA707/TS/06
100
CA707/TS/06
100
1 Pk. (100 tags)
1 Pk. (100 tags) MT12
1 Pk. (100 tags) MT16
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
7
FEED-THROUGH
SINGLE LEVEL POWER TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CTS50/70N
CTS50/70NA
CTS95/120N
HIGHLIGHTS
with
with
FEATURES
Allen Screw
Allen Screw
• DIN Rail and Panel
mensions & Weight
Width
mountable
20.5 mm
20.5 mm
27.0 mm
• Voltage Rating 1000V
ength
77.3 mm
77.3 mm
84.5 mm
• Current Rating up to 240A
• Hex Screw version for
eight w DIN Rail 35 x 7.5 mm
35 x 15 mm
71.1 mm
78.1 mm
71.1 mm
78.1 mm
83.0 mm
90.5 mm
easier tightening (NA)
• Auxiliary block for easy
eight per piece
93.8 g
95.0 g
177.2 g
plug in
chnical Data/Ratings
pprovals
APPLICATIONS
• Power Distribution
• Solar Applications
• AUX6 auxiliary for
indicator light or contactor
CB
SCHEME
E220514
60947-7-1
E220514
60947-7-1
E220514
60947-7-1
ire Size (solid / stranded)
oltage Rating
urrent Rating
orque
8-2/0 AWG
10-70 mm2
1000 V AC/DC
192 A
8-2/0 AWG
10-70 mm2
1000 V AC/DC
192 A
2-250 KCMIL 25-120 mm2
1000 V
175 A
38lb-in
1000 V
175 A
38lb-in
1000 V
240 A
90lb-in
1000 V AC/DC
269 A
3.0Nm
3.0Nm
6.0Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
22 mm
22 mm
24 mm
Flat Head 1.0x7.5 mm
Allen Wrench 5 mm
Allen Wrench 6 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CTS50/70N
20
20
20
20
20
20
20
20
CTS50/70NA
20
20
20
20
20
20
20
20
CTS95/120N
10
10
10
10
10
10
10
10
Red
R
CTS50/70N/R
CTS50/70N/BU
CTS50/70N/BL
CTS50/70N/O
CTS50/70N/G
CTS50/70N/Y
CTS50/70N/W
CTS50/70NA/R
CTS50/70NA/BU
CTS50/70NA/BL
CTS50/70NA/O
CTS50/70NA/G
CTS50/70NA/Y
CTS50/70NA/W
CTS95/120N/R
CTS95/120N/BU
CTS95/120N/BL
CTS95/120N/O
CTS95/120N/G
CTS95/120N/Y
CTS95/120N/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Accessories
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
Shorting Link System
Marking Tag
CA628/2
CA628/3
10
10
CA628/2
CA628/3
10
10
CA629/2
CA629/3
10
10
MT16
1 Pk. (100 tags) MT16
1 Pk. (100 tags) MT16
1 Pk. (100 tags)
Cat. No AUX6
Ratings
IEC60947-7-1
Voltage/Current: 1000 V / 41 A
Torque: 0.8 Nm
IEC 60079-7
Voltage/Current: 630 V / 36 A
Torque: 0.8 Nm
UL-1059
Voltage/Current: 600 V / 50 A
Torque: 14 lb-in
CSA22.2-158
Voltage/Current: 600 V / 50 A
Torque: 14 lb-in
Auxiliary Terminal Block
Used for:
CTS50/70N
CTS50/70NA
CTS95/120N
In certain power circuits, there
is a need to take an extra con-
nection for an Auxiliary circuit
like an indicating light or con-
tactor. The AUX6 terminal
easily plugs into the terminal
and provides this extra con-
nection point.
Wire Range: 22-8 AWG
Width x Length x Height: 8 x 53.6 x 29.4 mm
Std. Pk.: 10
Marking Tag: MT8
8
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
FEED-THROUGH
FEED THROUGH MULTI-CONNECTION
SCREW TERMINAL BLOCKS
CMC1-2
CMC2-2
CMCG4
HIGHLIGHTS
FEATURES
• 3 to 4 connections
• Up to 2 connection
points on each side
• 2 jumper channels on
Dimensions & Weight
Width
6 mm
6 mm
6 mm
Length
46.5 mm
65.0 mm
65.0 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
49.5 mm
56.5 mm
53.4 mm
60.5 mm
53.7 mm
60.9 mm
CMC2-2 for individual
potential distribution
Weight per piece
11.0 g
16.0 g
21.6 g
• CMCG4 same profile
as regular feed-through
Technical Data/Ratings
Approvals
version
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-10 AWG
0.2-4 mm2
630 V AC/DC
32 A
22-10 AWG
0.2-4 mm2
630 V AC/DC
32 A
24-10 AWG
0.2-4 mm2
1000 V AC/DC
-
APPLICATIONS
• Connecting different
type of wires with differ-
ent wire sizes into a sin-
gle terminal block
600 V
35 A
600 V
35 A
600 V
-
7lb-in
0.5Nm
7lb-in
0.5Nm
4.5 lb-in
0.5 Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
• Simple distribution
applications
Installation Instructions
Wire Stripping Length
Screwdriver
9 mm
9 mm
9 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
50
Grey (standard)
CMC1-2
100
100
100
100
100
100
100
100
CMC2-2
50
50
50
50
50
50
50
50
CMCG4
Yellow/Green
Red
R
CMC1-2/R
CMC1-2/BU
CMC1-2/BL
CMC1-2/O
CMC1-2/G
CMC1-2/Y
CMC1-2/W
CMC2-2/R
CMC2-2/BU
CMC2-2/BL
CMC2-2/O
CMC2-2/G
CMC2-2/Y
CMC2-2/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Accessories
End Plate
EPCMC1-2
EPCMC2-2
EPCMC2-2
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
2 pole
3 pole
Internal Jumper
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
50
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
50
–
–
–
–
–
–
–
–
–
–
4 pole
10 pole
100 pole
10
10
10
10
2 pole
3 pole
Insulated
Internal Jumper
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
–
–
–
–
–
–
–
–
–
–
4 pole
10 pole
100 pole
10
10
2 pole
3 pole
External Jumper
CA713/2
CA713/3
CA713/4
CA713/10
100
100
100
20
CA713/2
CA713/3
CA713/4
CA713/10
100
100
100
20
–
–
–
–
–
–
–
–
4 pole
10 pole
Test Socket
Marking Tag
CA707/TS/01
MT6
CA707/TS/01
–
–
1 Pk. (100 tags) MT6
1 Pk. (100 tags) MT6
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
9
DOUBLE LEVEL
FEED THROUGH DOUBLE LEVEL
SCREW TERMINAL BLOCKS
CDL4UN
CDL4UN(I.S)
HIGHLIGHTS
FEATURES
• Accommodates larger
Dimensions & Weight
Width
MT6 marking tags on both
levels
6 mm
6 mm
• Independent and internally
57.0 mm
Length
57.0 mm
shorted version
59.5 mm
67.2 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
59.5 mm
67.2 mm
• CDL4UN offers jumper
channel on both levels
13.8 g
Weight per piece
15.6 g
• Same profile Ground
versions
Technical Data/Ratings
Approvals
• Grounding Level on
CDLG4 is identified by
60947-7-1
60947-7-1
0.2-4 mm2
800 V AC/DC
32 A
E220514
E220514
green/yellow imprint
22-10 AWG
0.2-4 mm2
800 V AC/DC
32 A
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-10 AWG
600 V
35 A
600 V
35 A
APPLICATIONS
7lb-in
0.5Nm
7lb-in
0.5Nm
• High density writing
Polyamide 66
applications
Insulation Material
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
9 mm
9 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
DL4UN
100
100
100
100
100
100
100
100
Grey (standard)
CDL4UN(I.S)
100
100
100
100
100
100
100
100
DL4UN/R
DL4UN/BU
DL4UN/BL
DL4UN/O
DL4UN/G
DL4UN/Y
DL4UN/W
Red
R
CDL4UN(I.S)/R
CDL4UN(I.S)/BU
CDL4UN(I.S)/BL
CDL4UN(I.S)/O
CDL4UN(I.S)/G
CDL4UN(I.S)/Y
CDL4UN(I.S)/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Accessories
End Plate
EPCDL4UN
EPCDL4UN
Separator Plate
DIN Rail
SPCDL4U
100
SPCDL4U
100
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
2 pole
3 pole
Internal Jumper
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
4 pole
10 pole
100 pole
10
10
2 pole
3 pole
Insulated
Internal Jumper
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
4 pole
10 pole
100 pole
10
10
2 pole
3 pole
External Jumper
CA714/2
CA714/3
CA714/4
CA714/10
100
50
CA714/2
CA714/3
CA714/4
CA714/10
100
50
4 pole
50
50
10 pole
20
20
Test Socket
Marking Tag
CA707/TS/01
MT6
100
CA707/TS/01
100
1 Pk. (100 tags)
MT6
1 Pk. (100 tags)
10
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
DOUBLE LEVEL
FEED THROUGH DOUBLE LEVEL
SCREW TERMINAL BLOCKS
CDLG2.5
CDLG4(I.S)
CDLG4
Dimensions & Weight
Width
6 mm
6 mm
6 mm
Length
57.0 mm
57.0 mm
71.0 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
59.5 mm
67.2 mm
59.5 mm
67.2 mm
53.0 mm
61.0 mm
Weight per piece
22.2 g
20.6 g
20.2 g
Technical Data/Ratings
Approvals
CB
SCHEME
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
24-10 AWG
0.2-4 mm2
500 V AC/DC
-
24-10 AWG
0.2-4 mm2
500 V AC/DC
32 A
24-12 AWG
0.2-2.5 mm2
150 V
-
150 V
32 A (upper level)
4.5 lb-in
300 V
24 A
500 V
24 A
4.5 lb-in
0.5 Nm
0.5 Nm
4.5lb-in
0.4Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
8 mm
9 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.5 x 3.0 mm
Terminal Blocks
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
100
Yellow/Green
DLG4(I.S)
CDLG4
CDLG2.5
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
50
Accessories
End Plate
EPCDL4UN
EPCDL4UN
50
EPCDLG2.5
Separator Plate
DIN Rail
SPCDL4U
100
SPCDL4U
100
SPCDLG2.5
100
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
CA702
CA802
CA202
50
50
25
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
CA627/2
CA627/3
CA627/4
CA627/10
–
100
100
100
10
2 pole
3 pole
Internal Jumper
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
50
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
50
4 pole
10 pole
100 pole
10
10
–
10
10
–
–
–
–
–
–
–
–
–
–
2 pole
3 pole
Insulated
Internal Jumper
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
4 pole
10 pole
100 pole
10
10
2 pole
3 pole
External Jumper
CA714/2
CA714/3
CA714/4
CA714/10
100
50
CA714/2
CA714/3
CA714/4
CA714/10
100
50
CA715/2
CA715/3
CA715/4
CA715/10
100
100
100
20
4 pole
50
50
10 pole
20
20
Test Socket
Marking Tag
CA707/TS/01
MT6
100
CA707/TS/01
MT6
100
CA707/TS/01
MT2G
100
1 Pk. (100 tags)
1 Pk. (100 tags)
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
11
DOUBLE LEVEL
FEED THROUGH OFFSET DOUBLE LEVEL
SCREW TERMINAL BLOCKS
ODL4U
HIGHLIGHTS
FEATURES
• Top Level is offset by half
Dimensions & Weight
terminal width from lower
Width
6 mm
level
• Offset allows better ac-
cess to both levels even
when fully wired
Length
68 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
65.0 mm
71.1 mm
ODL4U
(without End Plates)
• Different Endplates for
front and back side guar-
antee flush mounting to
neighboring terminal
Weight per piece
14.5 g
Technical Data/Ratings
Approvals
blocks or end stops
60947-7-1
E220514
(EPODL4U and
EP1ODL4U)
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-10 AWG
600 V
0.2-4 mm2
800 VAC/DC
32 A
35 A
APPLICATIONS
7lb-in
0.5Nm
• High density writing
Insulation Material
Polyamide 66
applications
Installation Instructions
Wire Stripping Length
Screwdriver
9 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Grey (standard)
ODL4U
100
100
100
100
100
100
100
100
Red
R
ODL4U/R
ODL4U/BU
ODL4U/BL
ODL4U/O
ODL4U/G
ODL4U/Y
ODL4U/W
ODL4U
(with End Plates)
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
End Plate (Front)
EPODL4U
W
End Plate (Back)
EP1ODL4U
Cat. No.
Std. Pk.
Accessories
End Plate
EPODL4U(Front)
EP1ODL4U(Back)
50
50
Separator Plate
DIN Rail
SPCDL4U
100
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
50
50
25
2 pole
3 pole
Internal Jumper
CA727/2
CA727/3
CA727/4
CA727/10
CA727/100
100
100
100
10
4 pole
10 pole
100 pole
10
2 pole
3 pole
Insulated
Internal Jumper
CA747/2
CA747/3
CA747/4
CA747/10
CA747/100
100
100
100
10
4 pole
10 pole
100 pole
10
2 pole
3 pole
External Jumper
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
4 pole
10 pole
Test Socket
Marking Tag
CA707/TS/01
MT6
1 Pk. (100 tags)
12
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
DOUBLE LEVEL
FEED THROUGH DOUBLE LEVEL
SCREW TERMINAL BLOCKS
ODLG2.5
ODLG2.5(I.S)
ODL2.5
ODL2.5(I.S)
Double Level
with Offset
Double Level with Offset Internally
Shorted Upper / Lower Level
Double Level with Offset
Ground Connection
Double Level with Offset Internally
Shorted / Ground Connection
Dimensions & Weight
5 mm
Width
5 mm
5 mm
5 mm
62.0 mm
62.0 mm
Length
62.0 mm
62.0 mm
63.0 mm
70.5 mm
63.0 mm
70.5 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
63.0 mm
70.5 mm
63.0 mm
70.5 mm
15.3 g
17.0 g
Weight per piece
13.0 g
14.2 g
Technical Data/Ratings
Approvals
UL
UL
UL
UL
60947-7-1
60947-7-1
60947-7-1
0.2-2.5 mm2
800 V AC/DC
24 A
60947-7-1
0.2-2.5 mm2
800 V AC/DC
24 A
0.2-2.5 mm2
800 V AC/DC
24 A
24-12 AWG
300 V
0.2-2.5 mm2
800 V AC/DC
24 A
24-12 AWG
300 V
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
24-12 AWG
300 V
24-12 AWG
300 V
25 A
24 A
25 A
25 A
4.5lb-in
0.4Nm
4.5lb-in
0.4Nm
4.5lb-in
0.4Nm
4.5lb-in
0.4Nm
Polyamide 66
Polyamide 66
Insulation Material
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
8 mm
8 mm
8 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey
Stackable Clip-on
DL2.5
DL2.5A
50
50
ODL2.5(I.S)
ODL2.5A(I.S)
50
50
ODLG2.5
ODLG2.5A
50
50
ODLG2.5(I.S)
ODLG2.5A(I.S)
50
50
Cat. No.
Std. Pk.
Std. Pk.
at. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Accessories
EPODL2.5
EP1ODL2.5
50
50
EPODL2.5
EP1ODL2.5
50
50
End Plate
EPODL2.5
EP1ODL2.5
50
50
EPODL2.5
EP1ODL2.5
50
50
Front Side
Back Side
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
Shorting Link/
Jumpers
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
100
50
50
50
10
10
10
10
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
100
50
50
50
10
10
10
10
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
100
50
50
50
10
10
10
10
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
100
50
50
50
10
10
10
10
MT5
1 Pk. (100 tags)
MT5
1 Pk. (100 tags)
Marking Tag
MT5
1 Pk. (100 tags)
MT5
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
13
TRIPLE LEVEL
FEED THROUGH TRIPLE LEVEL
SCREW TERMINAL BLOCKS
CTL2.5U
CTL2.5U-H
CTL2.5U(I.S)
HIGHLIGHTS
FEATURES
• 3 Feed through levels
• Marking Tag space on all
3 levels
• Independent Levels and
internally shorted version
CTL2.5U(I.S)
Dimensions & Weight
Width
6 mm
6 mm
6 mm
84.0 mm
Length
61.0 mm
84.0 mm
• LEDꢀversions to show
switching indication in
various voltages -
68.0 mm
75.6 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
68.0 mm
75.6 mm
68.0 mm
75.6 mm
20.0 g
Weight per piece
21.0 g
21.0 g
CTL2.5U(L)/XX
echnical Data/Ratings
Approvals
• 3 Level terminal with
additional grounding level
CTLG2.5
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
E220514
22-12 AWG
0.2-2.5 mm2
500 V AC/DC
24 A
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-12 AWG
0.2-2.5 mm2
500 V AC/DC
24 A
22-12 AWG
150 V
0.2-2.5 mm2
500 V AC/DC
24 A
300 V
25 A
300 V
25 A
APPLICATIONS
25 A
• Control Systems with
4.5lb-in
0.4Nm
4.5lb-in
0.4Nm
4.5lb-in
0.4Nm
sensor applications
• Actuator applications
• Motor applications
• Applications with high
wire density
Polyamide 66
Insulation Material
Polyamide 66
Polyamide 66
nstallation Instructions
Wire Stripping Length
Screwdriver
9 mm
9 mm
9 mm
Flat Head 0.5 x 3.0 mm
Flat Head 0.5 x 3.0 mm
Flat Head 0.5 x 3.0 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
CTL2.5U
50
50
50
50
50
50
50
50
Grey (standard)
CTL2.5U-H
50
50
50
50
50
50
50
50
CTL2.5U(I.S)
50
50
50
50
50
50
50
50
CTL2.5U/R
CTL2.5U/BU
CTL2.5U/BL
CTL2.5U/O
CTL2.5U/G
CTL2.5U/Y
CTL2.5U/W
Red
R
CTL2.5U-H/R
CTL2.5U-H/BU
CTL2.5U-H/BL
CTL2.5U-H/O
CTL2.5U-H/G
CTL2.5U-H/Y
CTL2.5U-H/W
CTL2.5U(I.S)/R
CTL2.5U(I.S)/BU
CTL2.5U(I.S)/BL
CTL2.5U(I.S)/O
CTL2.5U(I.S)/G
CTL2.5U(I.S)/Y
CTL2.5U(I.S)/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Accessories
End Plate
EPCTL2.5U
EPCTL2.5U-H
EPCTL2.5U
2511120
CA701-15/S
2511160
20
20
10
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
CA702
CA802
CA202
50
50
25
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
2 pole
3 pole
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
Internal Jumper
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
4 pole
10 pole
100 pole
10
10
10
2 pole
3 pole
CA715/2
CA715/3
CA715/4
CA715/10
100
100
100
20
External Jumper
CA715/2
CA715/3
CA715/4
CA715/10
100
100
100
20
CA715/2
CA715/3
CA715/4
CA715/10
100
100
100
20
4 pole
10 pole
CA707/TS/01
MT2
100
Test Socket
Marking Tag
CA707/TS/01
MT2
100
CA707/TS/01
100
1 Pk. (100 tags)
1 Pk. (100 tags)
MT2
1 Pk. (100 tags)
14
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
TRIPLE LEVEL
FEED THROUGH TRIPLE LEVEL
SCREW TERMINAL BLOCKS
CTL2.5UH(I.S)D2
CTLG2.5
CTL2.5U-H(L)/XX
CTL2.5U(L)/XX
Dimensions & Weight
6 mm
6 mm
Width
6 mm
6 mm
61.0 mm
87.5 mm
Length
61.0 mm
84.0 mm
68.0 mm
75.6 mm
66.0 mm
74.0 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
68.0 mm
75.6 mm
68.0 mm
75.6 mm
15.1 g
27.4 g
Weight per piece
21.0 g
21.0 g
Technical Data/Ratings
Approvals
60947-7-1
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
E220514
E220514
22-12 AWG
0.2-2.5 mm2
500 V AC/DC
24 A
24-12 AWG
0.2-2.5 mm2
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-12 AWG
0.2-2.5 mm2
500 V AC/DC
24 A
22-12 AWG
300 V
0.2-2.5 mm2
500 V AC/DC
24 A
150 V
25 A
300 V
24 A
440 V
300 V
25 A
24 A
25 A
4.5lb-in
0.4Nm
4.5lb-in
0.4Nm
4.5lb-in
0.4Nm
4.5lb-in
0.4Nm
Polyamide 66
Polyamide 66
Insulation Material
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
9 mm
9 mm
9 mm
9 mm
Flat Head 0.5 x 3.0 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.5 x 3.0 mm
Flat Head 0.5 x 3.0 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
CTL2.5UH(I.S)D2
50
CTLG2.5
Grey
Yellow/Green
LED Voltage 12 V
LED Voltage 24 V
LED Voltage 48 V
LED Voltage 110 V
LED Voltage 220 V
TL2.5U-H(L)/12
TL2.5U-H(L)/24
TL2.5U-H(L)/48
TL2.5U-H(L)/110
TL2.5U-H(L)/220
50
50
50
50
50
CTL2.5U(L)/12
CTL2.5U(L)/24
CTL2.5U(L)/48
CTL2.5U(L)/110
CTL2.5U(L)/220
50
50
50
50
50
Cat. No.
Std. Pk.
50
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Accessories
End Plate
EPCTL2.5U-H
EPCTLG2.5
EPCTL2.5U-H
EPCTL2.5U
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
CA627/2
CA627/3
CA627/4
CA627/10
–
100
100
100
10
2 pole
3 pole
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
Internal Jumper
External Jumper
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
4 pole
10 pole
100 pole
–
10
10
10
CA715/2
CA715/3
CA715/4
CA715/10
100
100
100
20
2 pole
3 pole
4 pole
10 pole
CA715/2
CA715/3
CA715/4
CA715/10
100
100
100
20
CA715/2
CA715/3
CA715/4
CA715/10
100
100
100
20
CA715/2
CA715/3
CA715/4
CA715/10
100
100
100
20
CA707/TS/01
MT2G
100
CA707/TS/01
100
Test Socket
Marking Tag
CA707/TS/01
100
CA707/TS/01
100
1 Pk. (100 tags)
MT2
1 Pk. (100 tags)
MT2
1 Pk. (100 tags)
MT2
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
15
GROUND
GROUND/EARTH TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CGT4U
CGT4N
CGT6N
HIGHLIGHTS
FEATURES
• Yellow/Green color code
Dimensions & Weight
as per industry standard
Width
6 mm
6 mm
8 mm
• Clamp mechanically on
Rail by tightening middle
screw
Length
43 mm
54.2 mm
54.5 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
49.5 mm
56.7 mm
47.0 mm
54.4 mm
48.2 mm
55.8 mm
• Rail serves as grounding
busbar to feed ground
potential to all other
Weight per piece
21.5 g
22.0 g
27.0 g
grounding terminals
Technical Data/Ratings
Approvals
• CGT4N, CGT6N,
CGT10N and CGT16N
have same profile as re-
spective feed through
blocks
AEx ell
Ex ell U
60947-7-1
0.2-4 mm2
60947-7-1
0.2-4 mm2
60947-7-1
0.2-6 mm2
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-10 AWG
22-10 AWG
22-8 AWG
600V
800VAC/DC
600V
1000VAC/DC
600V
1000VAC/DC
• CGT4U, CGT10U, and
–
–
–
CGT35U mount on both
7.0lb-in
0.5Nm
7lb-in
0.5Nm
14lb-in
1.6Nm
35mm and 32mm DIN-Rail
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
APPLICATIONS
nstallation Instructions
Wire Stripping Length
Screwdriver
• Grounding Applications
8 mm
8 mm
9 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.8 x 4.0 mm
Terminal Blocks
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Yellow/Green
CGT4U
CGT4N
CGT6N
Cat. No.
Std. Pk.
50
Cat. No.
–
Std. Pk.
–
Cat. No.
–
Std. Pk.
–
Accessories
End Plate
EPCGT4U/Y
2511120
CA701-15/S
2511160
20
20
10
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
MT6
1 Pk. (100 tags)
Marking Tag
MT6
1 Pk. (100 tags)
MT8
1 Pk. (100 tags)
Assembly example for single
phase 3 wire circuits.
16
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
GROUND
GROUND/EARTH TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CGT10U
CGT10N
CGT16N
CGT35U
Dimensions & Weight
10 mm
Width
10 mm
12 mm
16 mm
45.0 mm
Length
55.0 mm
55.0 mm
58.0 mm
51.0 mm
58.2 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
48.5 mm
56.0 mm
48.5 mm
56.0 mm
63.7 mm
70.5 mm
30.5 g
Weight per piece
35.2 g
39.6 g
102.0 g
Technical Data/Ratings
Approvals
AEx ell
Ex ell U
IEC
60947-7-1
0.2-10 mm2
60947-7-1
0.2-16 mm2
E220514
E220514
E220514
E220514
60947-7-1
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
16-8AWG 22-6AWG 0.2-10mm2
16-6 AWG
20-4 AWG
8-2 AWG
2.5-35 mm2
1000VAC/DC
600V
600 V 1000VAC/DC
–
600V
1000VAC/DC
600V
1000VAC/DC
600V
–
–
–
14 lb-in
14 lb-in
1.6 Nm
14lb-in
1.6Nm
14lb-in
1.6Nm
25lb-in
2.8Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
11 mm
12 mm
15 mm
11 mm
Flat Head 0.8 x 4.0 mm
Flat Head 1.0 x 5.5 mm
Flat Head 1.0 x 5.5 mm
Flat Head 0.8 x 4.0 mm
Terminal Blocks
Std. Pk.
50
Cat. No.
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
20
Cat. No.
Std. Pk.
50
GT10U
CGT16N
CGT35U
CGT10N
Yellow/Green
Cat. No.
–
Std. Pk.
–
Cat. No.
–
Std. Pk.
–
Cat. No.
–
Std. Pk.
–
Cat. No.
–
Std. Pk.
–
Accessories
End Plate
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
DIN Rail
MT10
1 Pk. (100 tags)
MT12
1 Pk. (100 tags) MT16
1 Pk. (100 tags)
MT10
1 Pk. (100 tags)
Marking Tag
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
17
FUSE BLOCKS
FUSE BLOCKS, 5 x 20 and 5 x 25 mm
SCREW TERMINAL BLOCKS
CF4U(L)/110-240V
CF4U
CF4U(L)/6-60V
HIGHLIGHTS
FEATURES
• CF4U Series accepts
5x20mm/ 5x25mm fuse
types
27KΩ
220KΩ
Dimensions & Weight
Width
• Completely enclosed, no
8 mm
8 mm
8 mm
endplates
57.0 mm
Length
57.0 mm
57.0 mm
• CF4U(L) version with LED
for blown fuse indication
50.3 mm
57.6 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
50.3 mm
57.6 mm
50.3 mm
57.6 mm
• Large marking area
• No polarity required
• Blocks can be used for AC
& DC Voltages
15.4 g
Weight per piece
14.8 g
15.4 g
Technical Data/Ratings
Approvals
60947-7-3
E220514
60947-7-3
60947-7-3
E220514
E220514
0.2-4 mm2
800 V AC/DC
6.3 A
22-10 AWG
600 V
0.2-4 mm2
800 V AC/DC
6.3 A
APPLICATIONS
22-10 AWG
600 V
0.2-4 mm2
800 V AC/DC
6.3 A
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-10 AWG
• Control systems with fuse
600 V
10 A
protection
10 A
10 A
7lb-in
0.5Nm
7lb-in
0.5Nm
7lb-in
0.5Nm
Polyamide 66
Insulation Material
Polyamide 66
Polyamide 66
Fuse Specifications
Fuse Type
5x20 mm / 5 x 25 mm
-
5x20 mm / 5 x 25 mm
6-60V AC/DC
5x20 mm / 5 x 25 mm
110-240V AC/DC
LED Indicator Voltage
Installation Instructions
Wire Stripping Length
Screwdriver
9.5 mm
9.5 mm
9.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CF4U
CF4U/BU
CF4U/BL
50
50
50
CF4U(L)/6-60V
CF4U(L)/6-60V/BU
CF4U(L)/6-60V/BL
50
50
50
CF4U(L)/110-240V 50
CF4U(L)/110-240V/BU 50
CF4U(L)/110-240V/BL 50
Blue
BU
Black
BL
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Accessories
2511120
CA701-15/S
2511160
20
20
10
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2 pole
3 pole
CA711/2
CA711/3
CA711/4
CA711/10
100
50
External Jumper
Marking Tag
CA711/2
CA711/3
CA711/4
CA711/10
100
50
CA711/2
CA711/3
CA711/4
CA711/10
100
50
4 pole
50
50
50
10 pole
20
20
20
On Terminal
On Fuse Carrier
MT8
MT6
1 Pk. (100 tags)
1 Pk. (100 tags)
MT8
MT6
1 Pk. (100 tags)
1 Pk. (100 tags)
MT8
MT6
1 Pk. (100 tags)
1 Pk. (100 tags)
Fuses
5 x 20 mm
Current
Slow Blow
Fast Blow
Rating
0.1A
0.2A
0.5A
1.0A
2.0A
4.0A
5.0A
6.3A
8.0A
10.0A
Cat. No
0.1M5x20T
0.2M5x20T
0.5M5x20T
1.0M5x20T
2.0M5x20T
4.0M5x20T
5.0M5x20T
6.3M5x20T
8.0M5x20T
10.0M5x20T
Cat. No
0.1M5x20F
0.2M5x20F
0.5M5x20F
1.0M5x20F
2.0M5x20F
4.0M5x20F
5.0M5x20F
6.3M5x20F
8.0M5x20F
10.0M5x20F
Ø5mm
(0.2 in.)
18
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
FUSE BLOCKS
FUSE BLOCKS, 5 x 20 and 5 x 25 mm
SCREW TERMINAL BLOCKS
CF4SP(L)/110-240V
CF4SP
CF4SP(L)/6-60V
HIGHLIGHTS
FEATURES
• CF4SP Series accepts
5x20mm fuse types
27KΩ
220KΩ
• 6mm wide, compact design
• Internal shorting channel
• Completely enclosed, no
endplates
• CF4SP(L) version with LED
for blown fuse indication
• No polarity required
Dimensions & Weight
Width
6 mm
6 mm
6 mm
58.5 mm
Length
58.5 mm
58.5 mm
70.0 mm
77.5 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
70.0 mm
77.5 mm
70.0 mm
77.5 mm
17.4 g
Weight per piece
16.9 g
17.4 g
Technical Data/Ratings
Approvals
APPLICATIONS
• Control systems with fuse
protection
60947-7-3
60947-7-3
60947-7-3
E220514
E220514
E220514
0.2-4 mm2
1000 V AC/DC
10 A
• Control Circuits with
alternating configuration
with (CF4SPFT,
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
24-10 AWG
0.2-4 mm2
1000 V AC/DC
10 A
24-10 AWG
0.2-4 mm2
1000 V AC/DC
10 A
24-10 AWG
600 V
10 A
600 V
10 A
600 V
10 A
CKT4SP, etc...)
4.5lb-in
0.5Nm
4.5lb-in
0.5Nm
4.5lb-in
0.5Nm
Polyamide 66
Insulation Material
Polyamide 66
Polyamide 66
Fuse Specifications
Fuse Type
5x20 mm / 5 x 25 mm
-
5x20 mm / 5 x 25 mm
6-60V AC/DC
5x20 mm / 5 x 25 mm
110-240V AC/DC
LED Indicator Voltage
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
8 mm
8 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
CF4SP(L)/6-60V
CF4SP(L)/6-60V/BU 50
CF4SP(L)/6-60V/BL 50
Std. Pk.
50
Grey (standard)
CF4SP
CF4SP/BU
CF4SP/BL
50
50
50
CF4SP(L)/110-240V 50
CF4SP(L)/110-240V/BU50
CF4SP(L)/110-240V/BL50
CF4SPFT
Blue
BU
Black
BL
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Accessories
2511120
CA701-15/S
2511160
20
20
10
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2 pole
3 pole
Internal Jumper
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
Feed Through Terminal
Same Profile as CF4SP
4 pole
10 pole
100 pole
Technical Data/Ratings
10
10
10
2 pole
3 pole
Insulated
Internal Jumper
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
E220514
24-10 AWG
600 V
60947-7-1
0.2-4 mm2
1000 V
4 pole
10 pole
100 pole
10
10
10
30 A
32 A
2 pole
3 pole
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
External Jumper
Marking Tag
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
4.5lb-in
0.5Nm
4 pole
10 pole
Polyamide 66
On Terminal
On Fuse Carrier
MT6
MT6
1 Pk. (100 tags) MT6
1 Pk. (100 tags)
1 Pk. (100 tags) MT6
1 Pk. (100 tags) MT6
1 Pk. (100 tags)
1 Pk. (100 tags)
MT6
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
19
FUSE BLOCKS
DOUBLE LEVEL FUSE BLOCKS, 5 x 20 / 5 x 25 mm
SCREW TERMINAL BLOCKS
DDFL4U
DDFL4U(E)/XX
HIGHLIGHTS
FEATURES
• Top Level fuse link for
5x20mm/ 5x25mm fuse
types
Dimensions & Weight
Width
8 mm
8 mm
Length
88 mm
88 mm
• Bottom Level Feed
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
67.4 mm
74.3 mm
67.4 mm
74.3 mm
through terminal
• DDFL4U(E) version with
LED for blown fuse
indication in various
voltages
Weight per piece
Technical Data/Ratings
Approvals
28.0 g
27.0 g
• Blocks can be used in AC
60947-7-1
60947-7-1
E220514
E220514
& DC applications
Wire Size (solid / stranded)
Voltage Rating
22-10 AWG
0.2-4 mm2
800 V AC/DC
6.3 A
22-10 AWG
600 V
0.2-4 mm2
800 V AC/DC
6.3 A
600 V
6.3 A
35 A
APPLICATIONS
Current Rating (top)
Current Rating (bottom)
Torque
6.3 A
• Tight space fuse
32 A
35 A
32 A
applications
7lb-in
0.5Nm
7lb-in
0.5Nm
• No need for additional
Insulation Material
Polyamide 66
Polyamide 66
Feed through terminal
Fuse Specifications
Fuse Type
5x20 mm / 5 x 25 mm
-
5x20 mm / 5 x 25 mm
LED Indicator Voltage
24V, 48V, 110V, 220V, 440V
Installation Instructions
Wire Stripping Length
Screwdriver
9.5 mm
9.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Grey
Cat. No.
Std. Pk.
20
Cat. No.
Std. Pk.
DDFL4U
LED Voltage 24V AC/DC
LED Voltage 48V AC/DC
LED Voltage 110V AC/DC
LED Voltage 220V AC/DC
LED Voltage 440V AC
DDFL4U(E)/24
DDFL4U(E)/48
DDFL4U(E)/110
DDFL4U(E)/220
DDFL4U(E)/440
20
20
20
20
20
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Accessories
End Plate
EPDDFL4U
EPDDFL4U
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
2 pole
3 pole
Internal Jumper
CA729/2
CA729/3
CA729/4
CA729/10
100
50
CA729/2
CA729/3
CA729/4
CA729/10
100
50
4 pole
50
50
10 pole
10
10
2 pole
3 pole
Insulated
Internal Jumper
CA749/2
CA749/3
CA749/4
CA749/10
100
50
CA749/2
CA749/3
CA749/4
CA749/10
100
50
4 pole
50
50
10 pole
10
10
2 pole
3 pole
External Jumper
Marking Tag
CA711/2
CA711/3
CA711/4
CA711/10
100
50
CA711/2
CA711/3
CA711/4
CA711/10
100
50
4 pole
50
50
10 pole
20
20
MT8
MT2
1 Pk. (100 tags) MT8
1 Pk. (100 tags) MT2
1 Pk. (100 tags)
1 Pk. (100 tags)
on terminal
on lever
20
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
FUSE BLOCKS
DOUBLE LEVEL FUSE BLOCKS, 5 x 20 / 5 x 25 mm
WITH 2 CONNECTION POINTS
SCREW TERMINAL BLOCKS
DDFL4ULR
DDFL4U(E)LR/XX
HIGHLIGHTS
FEATURES
• Modified version of
DDFL4U with 2
equipotential
• DDFL4U(E) version with
LED for blown fuse indica-
tion in various voltages
Dimensions & Weight
Width
8 mm
8 mm
Length
88 mm
88 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
67.4 mm
74.3 mm
67.4 mm
74.3 mm
• Blocks can be used in AC &
DC applications
Weight per piece
24.5 g
27.0 g
Technical Data/Ratings
Approvals
APPLICATIONS
60947-7-1
60947-7-1
0.2-4 mm2
800 V AC/DC
6.3 A
E220514
E220514
• Control Circuits with multi
0.2-4 mm2
800 V AC/DC
6.3 A
22-10 AWG
wire fuse application
Wire Size (solid / stranded)
Voltage Rating
22-10 AWG
600 V
6.3 A
7lb-in
600 V
6.3 A
7lb-in
Current Rating (top)
Torque
0.5Nm
0.5Nm
Insulation Material
Polyamide 66
Polyamide 66
Fuse Specifications
Fuse Type
5x20 mm / 5 x 25 mm
-
5x20 mm / 5 x 25 mm
LED Indicator Voltage
24V, 48V, 110V, 220V, 440V
Installation Instructions
Wire Stripping Length
Screwdriver
9.5 mm
9.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
20
Cat. No.
Std. Pk.
Grey
DDFL4ULR
LED Voltage 24V AC/DC
LED Voltage 48V AC/DC
LED Voltage 110V AC/DC
LED Voltage 220V AC/DC
LED Voltage 440V AC
DDFL4U(E)LR/24
DDFL4U(E)LR/48
DDFL4U(E)LR/110
DDFL4U(E)LR/220
DDFL4U(E)LR/440
20
20
20
20
20
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Accessories
End Plate
EPDDFL4U
EPDDFL4U
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
2 pole
3 pole
Internal Jumper
CA729/2
CA729/3
CA729/4
CA729/10
100
50
CA729/2
CA729/3
CA729/4
CA729/10
100
50
4 pole
50
50
10 pole
10
10
2 pole
3 pole
Insulated
Internal Jumper
CA749/2
CA749/3
CA749/4
CA749/10
100
50
CA749/2
CA749/3
CA749/4
CA749/10
100
50
4 pole
50
50
10 pole
10
10
2 pole
3 pole
External Jumper
Marking Tag
CA711/2
CA711/3
CA711/4
CA711/10
100
50
CA711/2
CA711/3
CA711/4
CA711/10
100
50
4 pole
50
50
10 pole
20
20
MT8
MT2
1 Pk. (100 tags) MT8
1 Pk. (100 tags) MT2
1 Pk. (100 tags)
1 Pk. (100 tags)
on terminal
on lever
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
21
FUSE BLOCKS
FUSE BLOCKS, 1/4 x 1 and 1/4 x 11/4 in.
SCREW TERMINAL BLOCKS
CAFL4U
CAFL4U(L)/XX
CAFL4U(N)
HIGHLIGHTS
FEATURES
• CAFL4U Series accepts
1/4” x 1-1/4” (6.3x32mm)
mensions & Weight
Width
fuse types
• CAFL4U(L) versions with
LED for blown fuse
indication (24V, 48V, 110V,
220V)
• CAFL4U(N) version with
Neon bulb for blown fuse
indication
• Large marking area
• Blocks can be used in
AC & DC applications
9 mm
9 mm
9 mm
ength
72 mm
72 mm
72 mm
eight w DIN Rail 35 x 7.5 mm
35 x 15 mm
55.3 mm
63.0 mm
55.3 mm
63.0 mm
55.3 mm
63.0 mm
eight per piece
20.5 g
20.5 g
20.5 g
chnical Data/Ratings
pprovals
60947-7-3
60947-7-3
60947-7-3
E220514
E220514
E220514
ire Size (solid / stranded)
oltage Rating
urrent Rating
orque
22-10 AWG
0.2-4 mm2
1000 V
6.3 A
22-10 AWG
600 V
0.2-4 mm2
1000 V
6.3 A
22-10 AWG
600 V
0.2-4 mm2
1000 V
6.3 A
600 V
16 A
APPLICATIONS
16 A
16 A
• Control systems with
1/4” x 1-1/4” fuse protection
7lb-in
0.5Nm
7lb-in
0.5Nm
7
lb-in
0.5 Nm
nsulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
9.5 mm
9.5 mm
9.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Fuse Specifications
Fuse Type
1/4” x 1” (6.3 x 32 mm)
-
1/4” x 1” (6.3 x 32 mm)
24V, 48V, 110V, 220V
1/4” x 1” (6.3 x 32 mm)
110V - 240V
LED/Neon Indicator Voltage
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CAFL4U
CAFL4U/BU
CAFL4U/BL
25
25
25
–
–
–
–
–
–
–
–
–
Blue
BU
Black
BL
LED Voltage 24V AC/DC
LED Voltage 48V AC/DC
LED Voltage 110V AC/DC
LED Voltage 220V AC/DC
Neon Bulb 110-300V AC/DC
–
–
–
–
–
CAFL4U(L)/24
CAFL4U(L)/48
25
25
25
25
CAFL4U(L)/110
CAFL4U(L)/220
–
CAFL4U(N)
25
Cat. No.
EPCAFL4U
Std. Pk.
50
Cat. No.
EPCAFL4U
Std. Pk.
50
Cat. No.
EPCAFL4U
Std. Pk.
50
Accessories
End Plate
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
2 pole
External Jumper
CA716/2
CA716/3
CA716/4
CA716/10
50
50
50
20
CA716/2
CA716/3
CA716/4
CA716/10
50
50
50
20
CA716/2
CA716/3
CA716/4
CA716/10
50
50
50
20
3 pole
4 pole
10 pole
Marking Tag
MT9
1 Pk. (100 tags) MT9
1 Pk. (100 tags) MT9
1 Pk. (100 tags)
Ø6.3mm
(0.25 in.)
Fuses
1/4” x 1-1/4”
(6.3 x 32mm)
Current
Rating
Slow Blow
Cat. No
Fast Blow
Cat. No
Current
Rating
Slow Blow
Cat. No
Fast Blow
Cat. No
0.1A
0.2A
0.5A
1.0A
2.0A
0.1M6.3x32T
0.2M6.3x32T
0.5M6.3x32T
1.0M6.3x32T
2.0M6.3x32T
0.1M6x32F
0.2M6x32F
0.5M6x32F
1.0M6x32F
2.0M6x32F
4.0A
5.0A
6.3A
8.0A
10.0A
4.0M6.3x32T
5.0M6.3x32T
6.3M6.3x32T
8.0M6.3x32T
10.0M6.3x32T
4.0M6x32F
5.0M6x32F
6.3M6x32F
8.0M6x32F
10.0M6x32F
22
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
FUSE BLOCKS
COMPONENT CARRIER TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CCC4U
CPF
CPFL6-60V
CPFL110-240V
27KΩ
27KΩ
Dimensions
Width
6 mm
6 mm
6 mm
6 mm
Length
58.5 mm
28 mm
28 mm
28 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
46 mm
53.5 mm
35 mm
3.8 g
35 mm
3.8 g
35 mm
4.2 g
Weight per piece
Technical Data/Ratings
Approvals
10.2 g
60947-7-1
0.2-6 mm2 | 0.2-4 mm2
1000 V AC/DC
*
E220514
60947-7-1
0.2-4 mm2
E220514
60947-7-3
0.2-4 mm2
E220514
60947-7-3
0.2-4 mm2
1000V AC/DC
10 A
Wire Size (solid | stranded)
Voltage Rating
24-10 AWG
24-10 AWG
24-10 AWG
600 V
600 V
1 A
1000V AC/DC
1 A
600 V
10 A
1000V AC/DC
10 A
Current Rating
10 A
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Carrier Specifications
Component Type
Component carrier base
Plug module with diode
Diode Type IN4007
Plug module for 5x20 mm fuse Plug module for 5x20 mm fuse
with LED indicator
LED Indicator Voltage
–
–
–
6-60V AC/DC
110-240V AC/DC
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
10 mm
10 mm
10 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Grey (standard)
CCC4U
CPF
CPFL6-60V
CPFL110-240V
Accessories
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
DIN Rail
2511120
CA701-15/S
20
10
–
–
–
–
–
–
–
–
–
–
–
–
End Stop
CA702
CA802
CA103
50
50
50
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2 pole
3 pole
4 pole
10 pole
100 pole
Internal
Jumpers
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
10
Marking Tag
MT6
1 Pk. (100 tags) MT6
1 Pk. (100 tags) MT6
1 Pk. (100 tags) MT6
1 Pk. (100 tags)
* Current Rating is based on plug used.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
23
FUSE HOLDERS
FUSE HOLDERS, 10 x 38 mm and CC Type
10x38 Midget Fuse Holders
Pole
Without
With LED
Indication
Fuse
Size
Max Voltage & Current
Drawing
No.
Configuration
Indication
IEC
UL
PCF 10 & PCF 10 LED
1-pole
002550001
002550011
002550012
002550013
002550014
002550015
10x38
10x38
10x38
10x38
10x38
690V AC / 32A
690V AC / 32A
690V AC / 32A
690V AC / 32A
690V AC / 32A
600V AC/DC / 30A
600V AC/DC / 30A
600V AC/DC / 30A
600V AC/DC / 30A
600V AC/DC / 30A
1
1
1
1
1
1-pole+N
2-pole
002550002
002550003
002550004
002550005
3-pole
3-pole+N
EFD 10 & EFD 10 LED
1-pole
002540001
002540011
002540012
002540013
002540014
002540015
10x38
10x38
10x38
10x38
10x38
690V AC/DC / 32A
690V AC/DC / 32A
690V AC/DC / 32A
690V AC/DC / 32A
690V AC/DC / 32A
600V AC/DC / 30A
600V AC/DC / 30A
600V AC/DC / 30A
600V AC/DC / 30A
600V AC/DC / 30A
2
2
2
2
2
1-pole+N
2-pole
002540002
002540003
002540004
002540005
3-pole
3-pole+N
Holders
Pole
Without
With LED
Indication
Fuse
Size
UL Rating
Drawing
No.
Configuration
Indication
SCR
Voltage/Amp.
PCF CC & PCF CC LED
1-pole
2-pole
3-pole
002550101
002550103
002550104
002550111
002550113
002550114
CC Type
CC Type
CC Type
200 kA
200 kA
200 kA
600V AC/DC / 30A
600V AC/DC / 30A
600V AC/DC / 30A
1
1
1
EFD CC & EFD CC LED
1-pole
2-pole
3-pole
002540101
002540103
002540104
002540111
002540113
002540114
CC Type
CC Type
CC Type
200 kA
200 kA
200 kA
600V AC / 30A
600V AC / 30A
600V AC / 30A
2
2
2
EFD J30 DC & EFD J30 10 DC LED
1-pole
2-pole
3-pole
002570101
002570103
002570104
002570111
002570113
002570114
J-TYPE
J-TYPE
J-TYPE
200 kA
200 kA
200 kA
600V AC/DC / 30A
600V AC/DC / 30A
600V AC/DC / 30A
3
3
3
Pole
Without
With LED
Indication
Fuse
Size
Max Voltage & Current
Drawing
No.
Configuration
Indication
IEC
UL
PCF 10 DC & PCF 10 DC LED
1-pole
2-pole
002550201
002550203
002550211
002550213
10x38
10x38
1000V DC / 25A
1000V DC / 25A
1000V DC / 25A
1000V DC / 25A
1
1
EFH 10 DC & EFH 10 DC LED
1-pole
2-pole
002540201
002540203
002540211
002540213
10x38
10x38
1000V DC / 25A
1000V DC / 25A
1000V DC / 25A
1000V DC / 25A
2
2
EFH 14 DC & EFH 14 DC LED
1-pole
2-pole
002560201
002560203
002560211
002560213
14x51
14x51
1000V DC / 50A
1000V DC / 50A
1000V DC / 50A
1000V DC / 50A
3
3
Pole
Without
With LED
Indication
Fuse
Size
Max Voltage & Current
Drawing
No.
Configuration
Indication
IEC
UL
EFD 14 & EFD 14 LED
1-pole
002560001
002560011
002560012
002560013
002560014
002560015
14x51
14x51
14x51
14x51
14x51
690V AC / 50A
690V AC / 50A
690V AC / 50A
690V AC / 50A
690V AC / 50A
600V AC/DC / 50A
600V AC/DC / 50A
600V AC/DC / 50A
600V AC/DC / 50A
600V AC/DC / 50A
3
3
3
3
3
1-pole+N
2-pole
002560002
002560003
002560004
002560005
3-pole
3-pole+N
EFD 22 & EFD 22 LED
1-pole
002570001
002570011
002570012
002570013
002570014
002570015
22x58
22x58
22x58
22x58
22x58
690V AC / 100A
690V AC / 100A
690V AC / 100A
690V AC / 100A
690V AC / 100A
600V AC/DC / 100A
600V AC/DC / 100A
600V AC/DC / 100A
600V AC/DC / 100A
600V AC/DC / 100A
4
4
4
4
4
1-pole+N
2-pole
002570002
002570003
002570004
002570005
3-pole
3-pole+N
E212627
24
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
FUSE HOLDERS
FUSE HOLDERS, 10 x 38 mm and CC Type
1
2
64
75
43.8
17.8
17.5
59.5
4
37
47.3
6.8
PCF Type
EFD10 and EFH10 Type
3
4
93
69
83
69
35.6
43.5
6.8
27
43.5
6.8
56.8
56.8
EFD 14 Type
EFD 22 Type
NOTE:All dimensions are shown in millimeters. To convert to inches multiply by 0.03937
Accessories for The Modular Type PCF, EFD and EFH
Auxiliary Switches
Modular fuse holders have a unique user configurable
feature. By using the modular snap kit (parts sold
individually) a customer can configure any pole
configuration by inserting the connecting element (3 per
pole) into the slot in the side of the fuse holder and then
pushing them together and inserting the connecting
shaft into the handle.
NOTE:1 kit suffices for the assembly of 50 sets.
2 Pole Connection Kits
Model No.
Usable with
002540948
EFD 8, EFD 10, EFH 10, PCF 8,
PCF 10, EFD CC, PCF CC
EFD 14, EFH 14
002540949
EFD 8, EFD 10, PCF 8, PCF 10,
EFD CC, PCF CC
EFD 14
002560948
002570948
002560949
002570949
EFD 22, EFD J30
EFD 22, EFD J30
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
25
DISCONNECT & TEST
DISCONNECT AND TEST TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CDS6U
CDS6U/TS
CDS6U/FT
HIGHLIGHTS
FEATURES
• Slider Style Disconnect
Terminals
• CDS6U - Standard Slider
Slider Disconnect Terminal
Slider Disconnect Terminal
Including Test Sockets
Feed Through Terminal
with CDS6U profile
Disconnect
imensions & Weight
Width
• CDS6U/TS - Slider
Disconnect with integrated
testing points
8 mm
8 mm
6 mm
Length
82 mm
82 mm
82 mm
• CDS6U/FT - Same profile
Feed-Through
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
51.0 mm
59.2 mm
51.0 mm
59.2 mm
51.0 mm
59.2 mm
• Separate Testing points
allow insertion of standard
test probes
Weight per piece
33.8 g
33.8 g
21.2 g
echnical Data/Ratings
Approvals
• Disconnect is achieved b
operating sliding link wit
screw driver
CB
SCHEME
60947-7-1
0.2-6 mm2
800 V
60947-7-1
0.2-6 mm2
800 V
60947-7-1
0.2-6 mm2
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-8 AWG
22-8 AWG
22-8 AWG
600 V
• SLS2, SLS4 slide shorting
link system
• QJ8/2 - Shorting Plug
600 V
45 A
600 V
45 A
800 V
41 A
41 A
45 A
41 A
14lb-in
0.8Nm
14lb-in
0.8Nm
14lb-in
0.8Nm
APPLICATIONS
(see following page)
• Disconnect & Test
Applications
• Measuring / Control Circuits
• Utility Instruments an
Transformer Applications
• Meter Replacement
• External Current
Measurement
• Switch Boards
nsulation Material
Polyamide 66
Polyamide 66
Polyamide 66
nstallation Instructions
Wire Stripping Length
Screwdriver
10 mm
10 mm
10 mm
Flat Head 0.8 x 4 mm
Flat Head 0.8 x 4 mm
Flat Head 0.8 x 4 mm
erminal Blocks
Grey (standard)
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
CDS6U
50
50
50
50
50
50
50
50
DS6U/TS
50
50
50
50
50
50
50
50
CDS6U/FT
50
50
50
50
50
50
50
50
Red
R
CDS6U/R
CDS6U/BU
CDS6U/BL
CDS6U/O
CDS6U/G
CDS6U/Y
CDS6U/W
DS6U/TS/R
DS6U/TS/BU
DS6U/TS/BL
DS6U/TS/O
DS6U/TS/G
DS6U/TS/Y
DS6U/TS/W
CDS6U/FT/R
CDS6U/FT/BU
CDS6U/FT/BL
CDS6U/FT/O
CDS6U/FT/G
CDS6U/FT/Y
CDS6U/FT/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPCDS6U
Std. Pk.
50
at. No.
EPCDS6U
Std. Pk.
50
Cat. No.
EPCDS6U
Std. Pk.
50
Accessories
End Plate
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
2 pole
3 pole
Internal Jumper
CA723/2
CA723/3
CA723/4
CA723/10
100
50
50
CA723/2
CA723/3
CA723/4
CA723/10
100
50
50
CA723/2
CA723/3
CA723/4
CA723/10
100
50
50
4 pole
10 pole
10
10
10
2 pole
3 pole
4 pole
Slide Shorting Link
SLS2
SLS3
SLS4
50
25
25
SLS2
SLS3
SLS4
50
25
25
–
–
–
–
–
–
Insulated
Test Socket
grey
red
yellow
blue
black
TPSLS
100
100
100
100
100
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
TPSLSR
TPSLSY
TPSLSBU
TPSLSBK
Lock Out Cap
Shorting Plug
Marking Tag
LCCDS
QJ8/2
MT6
50
25
LCCDS
QJ8/2
MT6
50
25
–
–
–
–
1 Pk. (100 tags)
1 Pk. (100 tags)
MT8
1 Pk. (100 tags)
26
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
DISCONNECT & TEST
Example for CDS6U Test & Disconnect Terminal Block
SCREW TERMINAL BLOCKS
Single Phase Current Transformer Test Circuit
3 Phase current Transformer Test Set
LCCDS
EPCDS6U
SLS2
EPCDS66
CA72315
LCCDS
CDS6U
CA202
SLS2
CDSGU
CA202
Operating status
Operating status
A
1
2
A
A
A
1
2
1
2
3
4
5
6
(with internal distribution
of the k-point)
S1
S2
S1
S2
S1
S2
S1
S2
SLS2 in open condition
SLS2 in open condition
L1
L1
L2
L3
Comparison measurement for L1
Comparison measurement for L1
A
1
2
A
A
A
Sequence for test :
Sequence for test :
1
2
1
2
3
4
5
6
1) Remove SLS2 screw from terminal 2.
2) Connect ammeter to test sockets of terminal 2.
3) Open disconnect slide link of terminal 2.
1) Remove SLS2 screw from
terminal 1.
2) Connect ammeter to test
sockets of terminal 1 and 2.
A
A
3) Open disconnect slide link
of terminal 1.
S1
S2
S1
S2
S1
S2
S1
S2
L1
SLS2 in open condition
L1
L2
L3
Meter test for L1 through external power supply
Meter test for L1 through external power supply
A
1
2
Sequence for test :
Sequence for test :
1) Close short circuit slide
SLS2 of terminals 1 and 2.
2) Open disconnect slide link
of terminal 1.
1) Close short circuit slide SLS2 of terminals 1 and 2.
2) Open disconnect slide link of terminal 2.
3) Connect external power supply to test sockets of
terminals 1 and 2.
A
A
A
1
2
1
2
3
4
5
6
3) Connect external power
supply to test sockets of
terminals 1 and 2.
S1
S2
S1
S2
S1
S2
S1
S2
Closing of SLS2
L1
L1
L2
L3
Meter replacement
Meter Replacement for L1
A
1
2
Sequence for test :
Sequence for test :
1) Close short circuit slide SLS2 of terminals 1 and 2.
2) Open disconnect slide link of terminal 2.
3) Disconnect meter for L1 at terminals 1 and 2.
1) Close short circuit slide
SLS2 of terminals 1 and 2.
2) Open disconnect slide link
of terminal 1.
A
A
A
1
2
1
2
3
4
5
6
3) Disconnect meter for L1.
S1
S2
S1
S2
S1
S2
S1
S2
Closing of SLS2
L1
L1
L2
L3
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
27
DISCONNECT & TEST
BLADE/KNIFE STYLE DISCONNECT TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CKT4U
CKT4U/4
HIGHLIGHTS
FEATURES
• Knife / Blade Style Discon-
nect Terminals
• CKT4U - Standard Knife
Disconnect
• CKT4U/4 - 4 Connection
Knife Disconnect
Knife Style Disconnect
2 Connections
Knife Style Disconnect
4 Connections
Dimensions & Weight
Width
6 mm
6 mm
• Specially designed socket
headed screws act as fast
monitoring points
Length
46.3 mm
65.0 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
48.3 mm
56.0 mm
54.3 mm
62.0 mm
Weight per piece
10.5 g
16.6 g
APPLICATIONS
• Disconnect & Test
Applications
Technical Data/Ratings
Approvals
CB
SCHEME
60947-7-1
E220514
60947-7-1
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-10 AWG 22-10 AWG 0.2-4 mm2
22-10 AWG
600 V
0.2-4 mm2
600 V
35 A
600 V
16 A
800 V
28 A
800 V
20 A
17.5 A
7
lb-in
7
lb-in
0.5Nm
7lb-in
0.5Nm
Insulation Material
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
8 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CKT4U
50
50
50
50
50
50
50
50
CKT4U/4
50
50
50
50
50
50
50
50
Red
R
CKT4U/R
CKT4U/BU
CKT4U/BL
CKT4U/O
CKT4U/G
CKT4U/Y
CKT4U/W
CKT4U/4/R
CKT4U/4/BU
CKT4U/4/BL
CKT4U/4/O
CKT4U/4/G
CKT4U/4/Y
CKT4U/4/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPCKT4U
Std. Pk.
50
Cat. No.
Std. Pk.
50
Accessories
End Plate
EPCKT4U/4
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
2 pole
3 pole
External Jumper
Marking Tag
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
CA714/2*
CA714/3*
CA714/4*
CA714/10*
100
100
100
20
4 pole
10 pole
MT6
1 Pk. (100 tags)
MT6
1 Pk. (100 tags)
*
Insulated External shorting links can be used only in the upper level clamping unit of the Terminal Block.
28
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
DISCONNECT & TEST
BLADE/KNIFE STYLE DISCONNECT TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CKT4SP
CF4SPFT
CF4SP
HIGHLIGHTS
FEATURES
• Knife Style Disconnect
Terminal
• CF4SPFT same profile
Feed ThroughꢀTerminal
• CF4SP same profile as
Fuse Terminal, 5 x 20 mm
Fuse Types
Knife Style Disconnect
Feed-Through Terminal
Fuse Block
Same profile as CF4SP Fuse Block
Same profile as CF4SP Fuse Block
5x20 mm Fuse Type
Dimensions & Weight
Width
6 mm
6 mm
8 mm
Length
58.5 mm
58.5 mm
57.0 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
46.0 mm
53.5 mm
46.0 mm
53.5 mm
50.3 mm
57.6 mm
APPLICATIONS
• Control Systems with Fuse
Protection
Weight per piece
27.2 g
g
16.9 g
Technical Data/Ratings
• Fused Control Circuits with
alternating configurations
(CF4SP, CF4SPFT,
CGT4SP)
Approvals
CB
SCHEME
60947-7-1
0.2-4 mm2
1000 V
60947-7-1
0.2-4 mm2
1000 V
60947-7-1
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
24-10 AWG
24-10 AWG
24-10 AWG
0.2-4 mm2
1000 V AC/DC
10 A
• Switch Boards
600 V
30 A
600 V
30 A
600 V
10 A
28 A
32 A
4.5lb-in
0.5Nm
4.5lb-in
0.5Nm
4.5lb-in
0.5Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
8 mm
8 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CKT4SP
50
50
50
50
50
50
50
50
CF4SPFT
50
50
50
50
50
50
50
50
CF4SP
CF4SP/BU
CF4SP/BL
50
50
50
Red
R
CKT4SP/R
CKT4SP/BU
CKT4SP/BL
CKT4SP/O
CKT4SP/G
CKT4SP/Y
CKT4SP/W
CF4SPFT/R
CF4SPFT/BU
CF4SPFT/BL
CF4SPFT/O
CF4SPFT/G
CF4SPFT/Y
CF4SPFT/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Accessories
2511120
CA701-15/S
2511160
20
20
10
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
–
–
–
–
–
–
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
2 pole
3 pole
Internal Jumper
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
4 pole
10 pole
100 pole
10
10
10
2 pole
3 pole
Insulated
Internal Jumper
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
4 pole
10 pole
100 pole
10
10
10
2 pole
3 pole
External Jumper
Marking Tag
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
4 pole
10 pole
MT6
1 Pk. (100 tags)
MT6
1 Pk. (100 tags)
MT6
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
29
DISCONNECT & TEST
SLIDER STYLE DISCONNECT TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CDTTU
CDTTU-SH
CDTTUFT
HIGHLIGHTS
FEATURES
• Slider Style Disconnect
Terminals
• CDTTU - Standard Slider
Disconnect
Slider Disconnect Terminal
Slider Double Disconnect
Terminal
Feed Through Terminal
Slider Disconnect Profile
• CDTTU-SH - Double
Dimensions & Weight
Width
Disconnect Terminal
• CDTTUFT - Same profile
Feed-Through
8 mm
16 mm
8 mm
Length
63 mm
63 mm
63 mm
• Specially designed socket
headed screws act as fast
monitoring points
• Disconnect is achieved by
operating sliding link with
screw driver
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
58.7 mm
65.7 mm
58.7 mm
65.7 mm
58.7 mm
65.7 mm
Weight per piece
28.5 g
59.2 g
27.1 g
Technical Data/Ratings
Approvals
CB
SCHEME
E220514
60947-7-1
1.5-10 mm2
800 V
E220514
E220514
60947-7-1
1.5-10 mm2
800 V
60947-7-1
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
16-8 AWG
600 V
16-8 AWG 16-8 AWG 1.5-10 mm2
16-8 AWG
600 V
APPLICATIONS
• Disconnect & Test
Applications
300 V
25 A
300 V
25 A
160 V
10 A
41 A
57 A
41 A
57 A
14lb-in
1.2Nm
14 lb-in
14 lb-in
1.2Nm
14lb-in
1.2Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
12 mm
12 mm
12 mm
Flat Head 1.0 x 5.5 mm
Flat Head 1.0 x 5.5 mm
Flat Head 1.0 x 5.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CDTTU
50
50
50
50
50
50
50
50
CDTTU-SH
20
20
20
20
20
20
20
20
CDTTUFT
50
50
50
50
50
50
50
50
Red
R
CDTTU/R
CDTTU/BU
CDTTU/BL
CDTTU/O
CDTTU/G
CDTTU/Y
CDTTU/W
CDTTU-SH/R
CDTTU-SH/BU
CDTTU-SH/BL
CDTTU-SH/O
CDTTU-SH/G
CDTTU-SH/Y
CDTTU-SH/W
CDTTUFT/R
CDTTUFT/BU
CDTTUFT/BL
CDTTUFT/O
CDTTUFT/G
CDTTUFT/Y
CDTTUFT/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPCDTTU
Std. Pk.
50
Cat. No.
EPCDTTU
Std. Pk.
50
Cat. No.
EPCDTTU
Std. Pk.
50
Accessories
End Plate
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
2 pole
Shorting Plug
QJ8/2
25
QJ8/2
25
QJ8/2
25
2 pole
3 pole
External Jumper
CA710/2
CA710/3
CA710/4
CA710/10
100
50
CA710/2
CA710/3
CA710/4
CA710/10
100
50
CA710/2
CA710/3
CA710/4
CA710/10
100
50
4 pole
50
50
50
10 pole
20
20
20
Shorting Plug
Marking Tag
QJ8/2
25
–
–
QJ8/2
25
MT8
1 Pk. (100 tags) MT8
1 Pk. (100 tags) MT8
1 Pk. (100 tags)
30
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
DISCONNECT & TEST
LEVER STYLE DISCONNECT TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CSDL4U
DDDL4U
HIGHLIGHTS
FEATURES
• Lever Style Disconnect
Terminals
• CSDL4U - Standard
Lever Disconnect
Lever Style Disconnect
Lever Style Disconnect
Bottom Level Feed Through
Dimensions & Weight
Width
• DDDL4U - Lever
Disconnect with Lower
Level Feed-Through
• Same profile as CAFL4U
8 mm
8 mm
Length
58 mm
88 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
44.5 mm
52.0 mm
67.4 mm
74.3 mm
Weight per piece
15.0 g
27.0 g
APPLICATIONS
• Disconnect Applications
Technical Data/Ratings
Approvals
CB
SCHEME
60947-7-1
E220514
E220514
60947-7-1
Wire Size (solid / stranded)
Voltage Rating
22-10 AWG
0.2-4 mm2
22-10 AWG 22-10 AWG 0.2-4 mm2
600 V
1000 V
600 V
600 V
800 V
Current Rating
Top
Bottom
14 A
-
10 A
-
6.3 A
35 A
14 A
32 A
10 A
32 A
Torque
7lb-in
0.5Nm
7
lb-in
7
lb-in
0.5Nm
Insulation Material
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
9.5 mm
9.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CSDL4U
100
100
100
100
100
100
100
100
DDDL4U
20
20
20
20
20
20
20
20
Red
R
CSDL4U/R
CSDL4U/BU
CSDL4U/BL
CSDL4U/O
CSDL4U/G
CSDL4U/Y
CSDL4U/W
DDDL4U/R
DDDL4U/BU
DDDL4U/BL
DDDL4U/O
DDDL4U/G
DDDL4U/Y
DDDL4U/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Accessories
End Plate
EPCSFL4U
EPDDFL4U
Isolation Partition
DIN Rail
PPCSFL4U
50
–
–
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
50
50
50
CA702
CA802
CA202
50
50
50
2 pole
3 pole
Internal Jumper
–
–
–
–
–
–
–
–
CA729/2
CA729/3
CA729/4
CA729/10
100
50
4 pole
50
10 pole
10
2 pole
3 pole
Insulated Jumper
External Jumper
Marking Tag
–
–
–
–
–
–
–
–
CA749/2
CA749/3
CA749/4
CA749/10
100
50
4 pole
50
10 pole
10
2 pole
3 pole
4 pole
10 pole
CA711/2
CA711/3
CA711/4
CA711/10
100
50
50
20
CA711/2
CA711/3
CA711/4
CA711/10
100
50
50
2
MT8
MT2
1 Pk. (100 tags) MT8
1 Pk. (100 tags) MT2
1 Pk. (100 tags)
1 Pk. (100 tags)
on terminal
on lever
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
31
DISTRIBUTION
SIDE FEED DISTRIBUTION TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CDB4/X(1)
HIGHLIGHTS
FEATURES
• Distribution blocks with
50A Distribution
Dimensions & Weight
Terminal Block Side Feed
various output
configurations
Width
6 Outputs
8 Outputs
52.0 mm
58.0 mm
64.0 mm
70.0 mm
76.0 mm
100.0 mm
106.0 mm
• Stud/Bolt to secure
incoming wire
10 Outputs
12 Outputs
14 Outputs
22 Outputs
24 Outputs
• Internally connected
terminals
• Side/center feed versions
• up to 150A
Length
43 mm
• Protective shield for
incoming wire
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
46.2 mm
53.7 mm
APPLICATIONS
• Simplified distribution
systems
• Phase distribution
application
General Specifications
Phase Distribution Application
with CDB Terminals
Approvals
CB
SCHEME
60947-7-1
E220514
Voltage Rating
600 V
800 V AC/DC
Insulation Material
Polyamide 66
INSTALLATIONꢀ NOTES
• Sum of outgoing wires not
to exceed incoming current
• Higher output currents
should be connected close
to the input
INPUT
Technical Data/Ratings
Wire Size (solid / stranded)
10-8 AWG
50 A
6-16 mm2
64 A
Current Rating
Torque
26lb-in
2.0Nm
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
Hex Nut Driver M8
M1
M2
M3
OUTPUT
Technical Data/Ratings
Wire Size (solid / stranded)
Current Rating
22-10 AWG
0.2-4 mm2
35 A
64 A*
Torque
7lb-in
0.5Nm
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Grey (standard)
6 Outputs
CDB4/2(1)
CDB4/3(1)
CDB4/4(1)
CDB4/5(1)
CDB4/6(1)
CDB4/10(1)
CDB4/11(1)
10
10
10
5
5
5
8 Outputs
10 Outputs
12 Outputs
14 Outputs
22 Outputs
24 Outputs
5
Cat. No.
Std. Pk.
Accessories
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
50
50
Marking Tag
MT6
1 Pk. (100 tags)
* Total output current of system
32
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
DISTRIBUTION
CENTER FEED DISTRIBUTION TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CDB4/X
CDB6/X
CDB10/X
CDB25/X
Dimensions & Weight
50A Distribution
Terminal Block Center Feed
100A Distribution
Terminal Block Center Feed
130A Distribution
Terminal Block Center Feed
150A Distribution
Terminal Block Center Feed
Width
4 Outputs
44.0 mm
56.0 mm
68.0 mm
80.0 mm
96.0 mm
108.0 mm
48.0 mm
64.0 mm
80.0 mm
96.0 mm
-
-
72.0 mm
92.0 mm
112.0 mm
-
-
8 Outputs
12 Outputs
16 Outputs
20 Outputs
24 Outputs
88.0 mm
112.0 mm
136.0 mm
-
-
-
-
43 mm
48 mm
48 mm
49 mm
Length
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
46.2 mm
53.7 mm
47.8 mm
55.5 mm
47.8 mm
55.5 mm
57.2 mm
64.7 mm
General Specifications
Approvals
CB
SCHEME
60947-7-1
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
E220514
E220514
Voltage Rating
600 V
800 V AC/DC
600 V
800 V AC/DC
600 V
800 V AC/DC
600 V
800 V AC/DC
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
INPUT
Technical Data/Ratings
Wire Size (solid / stranded)
10-8 AWG
50 A
6-16 mm2
64 A
10-2 AWG
100 A
6-25 mm2
82 A
8-1/0 AWG
130 A
10-35 mm2
114 A
6-2/0 AWG
150 A
10-50 mm2
150 A
Current Rating
Torque
26lb-in
2.0Nm
35lb-in
3.0Nm
53lb-in
6.0Nm
53lb-in
6.0Nm
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
Hex Nut Driver M8
9 mm
Hex Nut Driver M10
11 mm
Hex Nut Driver M13
14 mm
Hex Nut Driver M15
OUTPUT
Technical Data/Ratings
Wire Size (solid / stranded)
Current Rating (per output)
Torque
22-10 AWG
0.2-4 mm2
22-8 AWG
1.5-6 mm2
22-6 AWG
1.5-10 mm2
12-2 AWG
6-25 mm2
35 A
32 A
50 A
41 A
65 A
57 A
75 A
75 A
7lb-in
0.5Nm
14lb-in
0.8Nm
14lb-in
1.2Nm
22lb-in
2.0Nm
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
Flat Head 0.6 x 3.5 mm
9 mm
Flat Head 0.8 x 4 mm
11 mm
Flat Head 0.8 x 4 mm
14 mm
Flat Head 1.0 x 5.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
4 Outputs
CDB4/1
CDB4/2
CDB4/3
CDB4/4
CDB4/5
CDB4/6
10
10
10
10
5
CDB6/1
CDB6/2
CDB6/3
CDB6/4
-
10
10
10
5
-
-
-
-
10
10
5
-
-
CDB25/1
CDB25/2
CDB25/3
CDB25/4
-
10
10
10
5
-
-
8 Outputs
CDB10/2
CDB10/3
CDB10/4
-
-
12 Outputs
16 Outputs
20 Outputs
24 Outputs
5
-
-
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Accessories
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
DIN Rail
CA702
CA802
50
50
CA702
CA802
50
50
CA702
CA802
50
50
CA702
CA802
50
50
End Stop
MT6
1 Pk. (100 tags) MT8
1 Pk. (100 tags) MT10
1 Pk. (100 tags) MT12
1 Pk. (100 tags)
Marking Tag
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
33
DISTRIBUTION
MULTI I/O DISTRIBUTION TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CMDB4/X
CMDB6/X
CMDB10/X
CMDB25/X
35 A Distribution Terminal Block
50 A Distribution Terminal Block
65 A Distribution Terminal Block
85 A Distribution Terminal Block
Dimensions
Width
2 pole
3 pole
4 pole
10 pole
13.5 mm
19.5 mm
25.5 mm
61.5 mm
17.5 mm
25.5 mm
33.5 mm
81.5 mm
21.5 mm
31.5 mm
41.5 mm
101.5 mm
26.0 mm
38.0 mm
50.0 mm
62.0 mm
Length
43 mm
48 mm
48 mm
49 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
46.2 mm
53.7 mm
47.8 mm
55.5 mm
47.8 mm
55.5 mm
57.2 mm
64.7 mm
Technical Data/Ratings
Approvals
CB
SCHEME
60947-7-1
0.2-4 mm2
1000V AC/DC
32 A
60947-7-1
1.5-6 mm2
1000V AC/DC
41 A
60947-7-1
1.5-10 mm2
1000V AC/DC
57 A
60947-7-1
6.0-25 mm2
800V AC/DC
101 A
E220514
22-10 AWG
600 V
E220514
22-8 AWG
600 V
E220514
22-6 AWG
600 V
E220514
Wire Size (solid / stranded)
Voltage Rating
12-4 AWG
600 V
85 A
Current Rating
35 A
50 A
65 A
Torque
7lb-in
0.5Nm
14lb-in
0.8Nm
14lb-in
1.2Nm
22lb-in
2.0Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
9 mm
11 mm
14 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.8 x 4 mm
Flat Head 0.8 x 4 mm
Flat Head 1.0 x 5.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
4 Outputs
Grey (standard)
CMDB4/2
10
10
10
10
CMDB6/2
10
10
10
10
CMDB10/2
10
10
10
10
CMDB25/2
10
10
10
10
Red
R
CMDB4/2/R
CMDB4/2/BU
CMDB4/2/BL
CMDB6/2/R
CMDB6/2/BU
CMDB6/2/BL
CMDB10/2/R
CMDB10/2/BU
CMDB10/2/BL
CMDB25/2/R
CMDB25/2/BU
CMDB25/2/BL
Blue
Black
BU
BL
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
6 Outputs
Grey (standard)
CMDB4/3
10
10
10
10
CMDB6/3
10
10
10
10
CMDB10/3
10
10
10
10
CMDB25/3
10
10
10
10
Red
R
CMDB4/3/R
CMDB4/3/BU
CMDB4/3/BL
CMDB6/3/R
CMDB6/3/BU
CMDB6/3/BL
CMDB10/3/R
CMDB10/3/BU
CMDB10/3/BL
CMDB25/3/R
CMDB25/3/BU
CMDB25/3/BL
Blue
Black
BU
BL
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
8 Outputs
Grey (standard)
CMDB4/4
10
10
10
10
CMDB6/4
10
10
10
10
CMDB10/4
10
10
10
10
CMDB25/4
10
10
10
10
Red
R
CMDB4/4/R
CMDB4/4/BU
CMDB4/4/BL
CMDB6/4/R
CMDB6/4/BU
CMDB6/4/BL
CMDB10/4/R
CMDB10/4/BU
CMDB10/4/BL
CMDB25/4/R
CMDB25/4/BU
CMDB25/4/BL
Blue
Black
BU
BL
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
20 Outputs
Grey (standard)
CMDB4/10
10
10
10
10
CMDB6/10
10
10
10
10
CMDB10/10
5
5
5
5
CMDB25/10
10
10
10
10
Red
R
CMDB4/10/R
CMDB4/10/BU
CMDB4/10/BL
CMDB6/10/R
CMDB6/10/BU
CMDB6/10/BL
CMDB10/10/R
CMDB10/10/BU
CMDB10/10/BL
CMDB25/10/R
CMDB25/10/BU
CMDB25/10/BL
Blue
Black
BU
BL
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Accessories
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
50
50
CA702
CA802
50
50
CA702
CA802
50
50
CA702
CA802
50
50
Marking Tag
MT6
1 Pk. (100 tags) MT8
1 Pk. (100 tags) MT10
1 Pk. (100 tags) MT12
1 Pk. (100 tags)
34
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
DISTRIBUTION
COMPACT HYBRID DISTRIBUTION TERMINAL BLOCKS
SPRING TERMINAL BLOCKS
CXDB35/10
CXDB35/10A
HIGHLIGHTS
FEATURES
• Hybrid Distribution
Terminal Block
with
Allen Screw
• Screw input (115A)
• 4 spring clamp outputs
(4 x41A)
1 Flat Head Screw Input
4 Spring Clamp Outputs
1 Hex Screw Input
• Modular system
4 Spring Clamp Outputs
• Standard slot & hex screw versions
• Expandable with standard CX Series
jumpers and
terminal blocks
• Easy Installation
Dimensions & Weight
Width
16 mm
16 mm
Length
81.6 mm
81.6 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
46.8 mm
54.3 mm
46.8 mm
54.3 mm
Weight per piece
53.2 g
53.2 g
APPLICATIONS
• Miniature Circuit Breaker (MCB)
General Specifications
distribution
Approvals
• Limited space distribution
CB
SCHEME
E220514
60947-7-1
E220514
60947-7-1
Voltage Rating
600 V
1000V AC/DC
600 V
1000V AC/DC
Insulation Material
Polyamide 66
Polyamide 66
Output Expansion
INPUT
CXDB35/10A
Technical Data/Ratings
Wire Size (solid / stranded)
14-2 AWG
1.5-35 mm2
14-2 AWG
1.5-35 mm2
Current Rating
Torque
115 A
25lb-in
125 A
2.5Nm
115 A
25lb-in
125 A
2.5Nm
2 x CX6
Terminal Blocks
Installation Instructions
Wire Stripping Length
Screwdriver
(see page 64)
17 mm
Flat Head 1.0 x 5.5 mm
17 mm
Hex Screw M5
JX6/3
OUTPUT
Technical Data/Ratings
Wire Size (solid / stranded)
24-8 AWG
0.2-10 mm2
41 A
24-8 AWG
41 A
0.2-10 mm2
41 A
Current Rating
41 A
MCB Distribution Example
Installation Instructions
Wire Stripping Length
Screwdriver
15 mm
Flat Head 0.8 x 4 mm
15 mm
Flat Head 0.8 x 4 mm
Terminal Blocks
Cat. No.
Std. Pk.
20
Cat. No.
Std. Pk.
20
Grey
CXDB35/10
CXDB35/10A
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Accessories
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Clamp
Jumpers
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
JX6/2
JX6/3
JX6/4
JX6/10
100
50
50
10
JX6/2
JX6/3
JX6/4
JX6/10
100
50
50
10
Marking Tag
MT16
1 Pk. (100 tags) MT16
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
35
DISTRIBUTION
GROUNDING NEUTRAL CLAMPS
GROUNDING SYSTEM
CENC4
CENC16
CENC35
HIGHLIGHTS
FEATURES
• 3 Clamp Sizes
• Panel Mount
•NES
Dimensions & Weight
Width
7.5 mm
23.3 mm
8 g
9.8 mm
23.3 mm
10.5 g
14.5 mm
27.3 mm
20 g
Length
•NEB6
Weight per piece
• DIN Rail Mount
•CA202
Technical Data/Ratings
•NEB10
Approvals
CB
SCHEME
• Tin Plated Copper Busbars
• Busbar Current rating 140A
Standard Color: Green
• Various colors
E220514
60947-7-2
E220514
60947-7-2
E220514
8-2 AWG 8-2 AWG 10-35 mm2
60947-7-2
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-12 AWG 22-12 AWG 0.2-6 mm2 10-6 AWG 10-6 AWG 10-16 mm2
600 V
-
600 V
-
800 V
37 A
600 V
-
600 V
-
800 V
76 A
600 V
-
600 V
-
800 V
125 A
2.5Nm
14 lb-in
14 lb-in
0.8Nm
17.5 lb-in 17.5 lb-in 2.0Nm
Polyamide 66
25 lb-in
25 lb-in
APPLICATIONS
• Grounding Solution
• Terminating Neutral an
Grounding Wires to a
single busbar
Insulation Material
Polyamide 66
Polyamide 66
nstallation Instructions
Wire Stripping Length
Screwdriver
12 mm
16 mm
16 mm
Flat Head 0.8 x 4 mm
Flat Head 1.0 x 5.5 mm
Flat Head 1.0 x 5.5 mm
• Distribution Applications
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Green (standard)
CENC4
50
50
50
50
50
CENC16
50
50
50
50
50
CENC35
50
50
50
50
50
Black
BL
BU
GR
Y
CENC4/BL
CENC4/BU
CENC4/GR
CENC4/Y
CENC16/BL
CENC16/BU
CENC16/GR
CENC16/Y
CENC35/BL
CENC35/BU
CENC35/GR
CENC35/Y
Blue
Grey
Yellow
Mounting Accessories
Panel Mount
Cat. No.
NEB6
Std. Pk.
1 m
Cat. No.
NEB6
Std. Pk.
1 m
Cat. No.
NEB6
Std. Pk.
1 m
Busbar
(6 x 6 mm)
Plastic Support
with Fixing Screw
NES
MT5
50
NES
50
NES
50
Marking Tag
1 Pk. (100 tags) MT6
1 Pk. (100 tags) MT6
1 Pk. (100 tags)
Mounting Accessories
DIN Rail Mount
Cat. No.
NEB10
Std. Pk.
1 m
Cat. No.
Std. Pk.
1 m
Cat. No.
Std. Pk.
1 m
Busbar
NEB10
NEB10
(10 x 3 mm)
End Clamp/Busbar
support for rail mounting
CA202
MT5
50
CA202
50
CA202
50
Marking Tag
1 Pk. (100 tags) MT6
1 Pk. (100 tags) MT6
1 Pk. (100 tags)
Panel Mount
Assembly Example
DIN Rail Mount
Assembly Example
CENC16
NEB10 Busbar
CENC4
CENC16
NEB6
Busbar
NES Plastic Support
CA202
Mounting
Support
36
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
HIGH VOLTAGE
HIGH VOLTAGE TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CHV4U
CHV6U
CHV10U
HIGHLIGHTS
FEATURES
• High Voltage Terminal
Blocks
Dimensions & Weight
Width
6 mm
8 mm
10 mm
• 1000V ULꢀRating
• 1500V IECꢀDCꢀRating
• Same Profile on all Current
Ratings
Length
52 mm
52 mm
52 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
63.4 mm
70.8 mm
63.4 mm
70.8 mm
63.4 mm
70.8 mm
Weight per piece
11.0 g
16.0 g
21.6 g
APPLICATIONS
• Solar Applications
• High Voltage Applications
Technical Data/Ratings
Approvals
CB
SCHEME
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-10 AWG
0.2-4 mm2
1500 V AC/DC
32 A
22-8 AWG
0.2-6 mm2
1500 V AC/DC
41 A
20-6 AWG
0.2-10 mm2
1500 V AC/DC
57 A
1000 V
35 A
1000 V
50 A
1000 V
65 A
7lb-in
0.5Nm
14lb-in
0.8Nm
14lb-in
1.2Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
12 mm
14 mm
14 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.8 x 4 mm
Flat Head 0.8 x 4 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CHV4U
50
50
50
50
50
50
50
50
CHV6U
50
50
50
50
50
50
50
50
CHV10U
50
50
50
50
50
50
50
50
Red
R
CHV4U/R
CHV4U/BU
CHV4U/BL
CHV4U/O
CHV4U/G
CHV4U/Y
CHV4U/W
CHV6U/R
CHV6U/BU
CHV6U/BL
CHV6U/O
CHV6U/G
CHV6U/Y
CHV6U/W
CHV10U/R
CHV10U/BU
CHV10U/BL
CHV10U/O
CHV10U/G
CHV10U/Y
CHV10U/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPUSC
Std. Pk.
50
Cat. No.
EPUSC
Std. Pk.
50
Cat. No.
EPUSC
Std. Pk.
50
Accessories
End Plate
SP2.5/4UN
50
Separator Plate
DIN Rail
SP2.5/4UN
50
SP2.5/4UN
50
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
CA702
CA802
CA202
50
50
25
End Stop
CA702
CA802
CA202
50
50
25
CA702
CA802
CA202
50
50
25
2 pole
3 pole
CA623/2
CA623/3
CA623/4
CA623/10
100
100
100
10
Internal Jumper
CA624/2
CA624/3
CA624/4
CA624/10
100
100
100
10
CA625/2
CA625/3
CA625/4
CA625/10
100
100
100
10
4 pole
10 pole
100 pole
MT6
1 Pk. (100 tags)
Marking Tag
MT8
1 Pk. (100 tags)
MT10
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
37
THERMOCOUPLE
THERMOCOUPLE BLOCKS
SCREW TERMINAL BLOCKS
CTT2.5UK/J/T/E
HIGHLIGHTS
FEATURES
• Thermocouple terminal
blocks are used to extend
thermocouple
CTT2.5UX
10 mm
Dimensions & Weight
Width
compensating lines in
measuring circuits
• The current bar of the
terminal block is made of
the same material as the
thermocouple wire (As per
ENꢀ60584/DINEN 60584)
Length
43 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
46.2 mm
53.7 mm
Weight per piece
12.4 g
• No loss of potential at the
connection points
Technical Data/Ratings
Approvals
• Available types:
K Type - Chromel (NiCr),
Alumel (Ni)
CB
SCHEME
60947-7-1
J Type - Iron (Fe),
Constantan (CuNi)
T Type - Copper (Cu),
Constantan (CuNi)
E Type - Chromel (NiCr),
Constantan (CuNi)
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-14 AWG
1000 V AC/DC
0.2-2.5 mm2
10 A
7lb-in/0.4Nm
Insulation Material
Polyamide 66
APPLICATIONS
• Measurement applications
nstallation Instructions
Wire Stripping Length
Screwdriver
8 mm
Flat Head 0.5 x 3 mm
Terminal Blocks
Cat. No.
Std. Pk.
Grey
U Type
J Type
T Type
G Type
CTT2.5UK
CTT2.5UJ
CTT2.5UT
CTT2.5UG
50
50
50
50
Cat. No.
Std. Pk.
50
Accessories
End Plate
EP2.5/4UN
Partition Plate
DIN Rail
PP2.5/4UN
50
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
100
100
Marking Tag
INCLUDED
Typical Temperature Measuring Circuit
Thermocouple
Terminal Block
Compensating Cable
Supply Cable
Thermocouple
(Sensor)
Measuring
Instrument
Thermocouple
Terminal Block
Reference
Junction
38
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
TAB CONNECTION
TAB CONNECTION TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CTC4U
HIGHLIGHTS
FEATURES
• Standard tab connection
Dimensions & Weight
Width
terminals
6 mm
• Quick-Connect Tabs
Length
47 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
51.2 mm
58.8 mm
APPLICATIONS
• Transportation
• Railroad Applications
Weight per piece
Technical Data/Ratings
Approvals
8.0 g
CB
SCHEME
60947-7-1
0.2-4.0 mm2 | 24-12 AWG
300 V
Wire Size (solid | stranded)
Voltage Rating
Current Rating
32 A
Tab (Blade) Size
6.3x0.8mm
Insulation Material
Polyamide 66
Installation Instructions
Wire Stripping Length
9 mm
Terminal Blocks
Cat. No.
Std. Pk.
Grey (standard)
CTC4U
100
100
100
100
100
100
100
100
Red
R
CTC4U/R
CTC4U/BU
CTC4U/BL
CTC4U/O
CTC4U/G
CTC4U/Y
CTC4U/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPCTC4U
Std. Pk.
50
Accessories
End Plate
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
100
100
CA707/TS/01
MT6
Test Socket
Marking Tag
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
39
SPRING LOADED
FEED-THROUGH TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CTS4USC
CTS6USC
CTS10USC
HIGHLIGHTS
FEATURES
• Feed Through Terminals
with Springs below clamps
• High torque screws
• Built-in springs guarantee
secure connection even
when screw is not tight
• 4 mm, 6 mm, 10mm
terminal blocks with same
size profile
• It is recommended to use
hook type lugs/ ferrules for
wire termination
• Both, high-torque screws
and built-in spring
• Various disconnect
terminals
Feed Through Terminal
Spring Loaded
Feed Through Terminal
Spring Loaded
Feed Through Terminal
Spring Loaded
Dimensions & Weight
Width
6 mm
8 mm
10 mm
Length
52 mm
52 mm
52 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
63.4 mm
70.8 mm
63.4 mm
70.8 mm
63.4 mm
70.8 mm
Weight per piece
13.0 g
10.0 g
12.6 g
Technical Data/Ratings
Approvals
CB
SCHEME
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-10 AWG
600 V
0.2-4 mm2
1500V AC/DC
32 A
22-8 AWG
1000 V
50 A
0.2-6 mm2
1500V AC/DC
41 A
20-6 AWG
1000 V
65 A
0.2-10 mm2
1500V AC/DC
57 A
35 A
7lb-in
0.5Nm
14lb-in
0.8Nm
14lb-in
1.2Nm
APPLICATIONS
• Vibration Applications
• Projects which follow the
following safety regulations:
• Electric Supply Standard
(ESI)
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
12 mm
14 mm
14 mm
Screwdriver
Flat Head 0.6 x 3.5 mm
Flat Head 0.8 x 4 mm
Flat Head 0.8 x 4 mm
• British CEGB Standard
• NTPC standard
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CTS4USC
50
50
50
50
50
50
50
50
CTS6USC
50
50
50
50
50
50
50
50
CTS10USC
50
50
50
50
50
50
50
50
Red
R
CTS4USC/R
CTS4USC/BU
CTS4USC/BL
CTS4USC/O
CTS4USC/G
CTS4USC/Y
CTS4USC/W
CTS6USC/R
CTS6USC/BU
CTS6USC/BL
CTS6USC/O
CTS6USC/G
CTS6USC/Y
CTS6USC/W
CTS10USC/R
CTS10USC/BU
CTS10USC/BL
CTS10USC/O
CTS10USC/G
CTS10USC/Y
CTS10USC/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPUSC
Std. Pk.
50
Cat. No.
EPUSC
Std. Pk.
50
Cat. No.
EPUSC
Std. Pk.
50
Accessories
End Plate
Separator Plate
DIN Rail
SP2.5/4UN
50
SP2.5/4UN
50
SP2.5/4UN
50
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
100
50
50
CA702
CA802
CA202
100
50
50
CA702
CA802
CA202
100
50
50
1.5 mm2
2.5 mm2
4 mm2
Hook Type
Lug / Ferrule
CA604/1
CA604/2
CA604/5
–
100
100
100
–
CA604/1
CA604/2
CA604/5
CA604/4
–
100
100
100
100
–
CA604/1
CA604/2
CA604/5
CA604/4
CA604/3
100
100
100
100
100
6 mm2
10 mm2
–
–
2 pole
3 pole
Pre Assembled
Jumpers
CA623/2
CA623/3
CA623/4
CA623/10
100
100
100
10
CA624/2
CA624/3
CA624/4
CA624/10
100
100
100
10
CA625/2
CA625/3
CA625/4
CA625/10
100
100
100
10
4 pole
10 pole
Marking Tag
MT6
1 Pk. (100 tags)
MT8
1 Pk. (100 tags)
MT10
1 Pk. (100 tags)
40
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
SPRING LOADED
DISCONNECT TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CKT4SPSC
CDS6U/SC
CDTTUSC
CDTTUFTSC
Knife Disconnect
Spring Loaded Terminal
Slider Disconnect
Spring Loaded Terminal
Slider Disconnect
Spring Loaded Terminal
Feed Through Terminal
Same profile as CDTTUSC
Dimensions & Weight
Width
6 mm
8 mm
8 mm
8 mm
Length
58.5 mm
82 mm
63 mm
63 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
46.0 mm
53.5 mm
51.0 mm
59.2 mm
58.7 mm
65.7 mm
58.7 mm
65.7 mm
Weight per piece
14.1 g
30.9 g
31.0 g
25.4 g
Technical Data/Ratings
Approvals
CB
SCHEME
60947-7-1
60947-7-1
60947-7-1
60947-7-1
1.5-10 mm2
800V AC/DC
57 A
E220514
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
24-10 AWG
0.2-4 mm2
1000V AC/DC
28 A
22-8 AWG
600 V
0.2-6 mm2
800V AC/DC
41 A
16-8 AWG
600 V
1.5-10 mm2
800V AC/DC
57 A
16-8 AWG
600 V
30 A
600 V
41 A
45 A
41 A
4.5lb-in
0.5Nm
14lb-in
0.8Nm
14lb-in
1.2Nm
14lb-in
1.2Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
8 mm
10 mm
12 mm
12 mm
Screwdriver
Flat Head
Flat Head 0.8 x 4 mm
Flat Head 1.0 x 5.5 mm
Flat Head 1.0 x 5.5 mm
0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CKT4SPSC
50
50
50
50
50
50
50
50
DS6U/SC
50
50
50
50
50
50
50
50
CDTTUSC
50
50
50
50
50
50
50
50
CDTTUFTSC
50
50
50
50
50
50
50
50
Red
R
CKT4SPSC/R
CKT4SPSC/BU
CKT4SPSC/BL
CKT4SPSC/O
CKT4SPSC/G
CKT4SPSC/Y
CKT4SPSC/W
DS6U/SC/R
DS6U/SC/BU
DS6U/SC/BL
DS6U/SC/O
DS6U/SC/G
DS6U/SC/Y
DS6U/SC/W
CDTTUSC/R
CDTTUSC/BU
CDTTUSC/BL
CDTTUSC/O
CDTTUSC/G
CDTTUSC/Y
CDTTUSC/W
CDTTUFTSC/R
CDTTUFTSC/BU
CDTTUFTSC/BL
CDTTUFTSC/O
CDTTUFTSC/G
CDTTUFTSC/Y
CDTTUFTSC/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPCDS6U
Std. Pk.
50
Cat. No.
–
Std. Pk.
–
Cat. No.
EPCDTTU
Std. Pk.
50
Cat. No.
EPCDTTU
Std. Pk.
50
Accessories
End Plate
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
100
50
50
CA702
CA802
CA202
100
50
50
CA702
CA802
CA202
100
50
50
CA702
CA802
CA202
100
50
50
2 pole
3 pole
4 pole
10 pole
100 pole
Pre Assembled
Jumpers
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
100
100
100
10
CA723/2
CA723/3
CA723/4
CA723/10
–
100
50
50
10
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
10
2 pole
3 pole
4 pole
10 pole
100 pole
Insulated Jumpers
External Jumpers
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
100
100
100
10
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
10
2 pole
3 pole
4 pole
10 pole
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
–
–
–
–
–
–
–
–
CA710/2
CA710/3
CA710/4
CA710/10
100
50
50
20
CA710/2
CA710/3
CA710/4
CA710/10
100
50
50
20
Shorting Plug
Marking Tag
–
–
–
–
QJ8/2
MT8
25
–
–
MT6
1 Pk. (100 tags)
MT8
1 Pk. (100 tags)
1 Pk. (100 tags)
MT8
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
41
ELECTRONIC COMPONENTS
DIODE CIRCUIT TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CDL4U(E)D1/D2
CDL4U(E)D3
CDL4U(E)DD1/DD2
HIGHLIGHTS
FEATURES
1
2
• Various configurations of
1
2
Electronic components
3
4
1
2
soldered into CDL4U
3
+4
double level terminal block
CDL4U(E)DD1
CDL4U(E)D1
1
1
2
• Various Diode / Resistor
3
4
2
combinations
CDL4U(E)D3
3
4
3
-4
• 4 connection points for
convenient wiring
CDL4U(E)D2
CDL4U(E)DD2
• Terminal Block with open
current bar CDL4U(O) can
Arc Suppression circuit diode for
contactors and solenoid valves
Diode reverse polarity
protection
Diode circuit for lamp testing
Dimensions & Weight
Width
be individually soldered with
electronic components
• Spacer CDL4USP can be
used to cover overlapping
components when soldered
individually
6 mm
6 mm
6 mm
Length
55.5 mm
55.5 mm
55.5 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
55.7 mm
63.1 mm
55.7 mm
63.1 mm
55.7 mm
63.1 mm
Weight per piece
13.6 g
13.4 g
13.4 g
Technical Data/Ratings
APPLICATIONS
• Reverse polarity protection
• Lamp testing
Approvals
CB
SCHEME
E220514
60947-7-1
0.2-4 mm2
500 V AC
32 A
E220514
60947-7-1
E220514
60947-7-1
0.2-4 mm2
500 V AC
32 A
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-10 AWG
600 V 300 V
35 A 25 A
7lb-in
22-10 AWG
0.2-4 mm2
500 V AC
32 A
22-10 AWG
600 V 300 V
35 A 25 A
7lb-in
600 V 300 V
35 A
25 A
0.5Nm
7lb-in
0.5Nm
0.5Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Electronic Component Specifications
Diode Type
1N 4007
1N 4007
1000 V / 1 A
-
1N 4007
1000 V / 1 A
-
Diode Reverse Voltage / Current
Indicator Voltage
1000 V / 1 A
-
Installation Instructions
Wire Stripping Length
9 mm
9 mm
9 mm
Screwdriver
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
Grey
CDL4U(E)D1
CDL4U(E)D2
100
100
CDL4U(E)D3
CDL4U(E)DD1
CDL4U(E)DD2
100
100
Cat. No.
EPCDL4U
Std. Pk.
50
Cat. No.
EPCDL4U
Std. Pk.
50
Cat. No.
EPCDL4U
Std. Pk.
50
Accessories
End Plate
CDL4U SPACER
Spacer
CDL4USP
50
CDL4USP
50
CDL4USP
50
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
50
50
CA702
CA802
50
50
CA702
CA802
50
50
2 pole
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
Internal Jumper
Spacer to cover electronic
components which stick
out of CDL4U(O)
3 pole
4 pole
10 pole
Cat. No.
Std. Pk.
50
Marking Tag
MT2
1 Pk. (100 tags) MT2
1 Pk. (100 tags) MT2
1 Pk. (100 tags)
CDL4USP
42
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
ELECTRONIC COMPONENTS
DIODE CIRCUIT TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CDL4U(E)DD3/DD4
CDL4U(E)D4
CDL4U(E)DD5
1
2
1
2
+3
+4
1
2
CDL4U(E)DD3
1
2
3
+4
3
+4
CDL4U(E)D4
CDL4U(E)DD5
+3
+4
CDL4U(E)DD4
Diode circuit for lamp testing
Diode circuit for lamp testing
with LED series resistance
Diode circuit for lamp testing
with LED series resistance
Dimensions & Weight
Width
6 mm
6 mm
6 mm
Length
55.5 mm
55.5 mm
55.5 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
55.7 mm
63.1 mm
55.7 mm
63.1 mm
55.7 mm
63.1 mm
Weight per piece
13.6 g
13.6 g
13.6 g
Technical Data/Ratings
Approvals
CB
SCHEME
E220514
60947-7-1
0.2-4 mm2
500 V AC
32 A
E220514
60947-7-1
0.2-4 mm2
500 V AC
32 A
E220514
60947-7-1
0.2-4 mm2
500 V AC
32 A
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-10 AWG
600 V 300 V
35 A 25 A
7lb-in
22-10 AWG
600 V 300 V
35 A 25 A
7lb-in
22-10 AWG
600 V 300 V
35 A 25 A
7lb-in
0.5Nm
0.5Nm
0.5Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Electronic Component Specifications
Diode Type
1N 4007
1N 4007
1000 V / 1 A
-
1N 4007
1000 V / 1 A
-
Diode Reverse Voltage / Current
Indicator Voltage
1000 V / 1 A
-
Installation Instructions
Wire Stripping Length
9 mm
9 mm
9 mm
Screwdriver
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey
CDL4U(E)DD3
CDL4U(E)DD4
100
100
CDL4U(E)D4/12V
CDL4U(E)D4/24V
100
100
CDL4U(E)DD5/12V 100
CDL4U(E)DD5/24V 100
Cat. No.
EPCDL4U
Std. Pk.
50
Cat. No.
EPCDL4U
Std. Pk.
50
Cat. No.
EPCDL4U
Std. Pk.
50
Accessories
End Plate
Spacer
CDL4USP
50
CDL4USP
50
CDL4USP
50
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
50
50
CA702
CA802
50
50
CA702
CA802
50
50
2 pole
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
Internal Jumper
3 pole
4 pole
10 pole
Marking Tag
MT2
1 Pk. (100 tags) MT2
1 Pk. (100 tags) MT2
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
43
ELECTRONIC COMPONENTS
INDICATOR TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CDL4U(E)N1
CDL4U(E)LD5
CDL4U(E)LD3
HIGHLIGHTS
FEATURES
• Various configurations of
1
2
+1
1
Electronic components
soldered into CDL4U
double level terminal block
3
4
3
-4
3
4
• Various Indicator options
• ACꢀvoltage indicator
• DC voltage indicator
• LED and Neon lamp
CDL4U(E)N1
CDL4U(E)LD5
CDL4U(E)LD3
AC Voltage indicator with Neon
lamp
AC Voltage indicator with LED
AC Voltage indicator with LED
Dimensions & Weight
Width
versions
6 mm
6 mm
6 mm
• 4 connection points for
convenient wiring
Length
55.5 mm
55.5 mm
55.5 mm
• Terminal Block with open
current bar CDL4U(O) can
be individually soldered
with electronic components
• Spacer CDL4USP can be
used to cover overlapping
components when
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
55.7 mm
63.1 mm
55.7 mm
63.1 mm
55.7 mm
63.1 mm
Weight per piece
13.6 g
12.4 g
12.4 g
Technical Data/Ratings
Approvals
CB
SCHEME
E220514
E220514
E220514
60947-7-1
0.2-4 mm2
500 V AC
32 A
60947-7-1
0.2-4 mm2
500 V AC
32 A
60947-7-1
0.2-4 mm2
500 V AC
32 A
soldered individually
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-10 AWG
600 V 300 V
35 A 25 A
7lb-in
22-10 AWG
600 V 300 V
35 A 25 A
7lb-in
22-10 AWG
600 V 300 V
35 A 25 A
7lb-in
APPLICATIONS
• AC voltage indication
• DC voltage indication
0.5Nm
0.5Nm
0.5Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Electronic Component Specifications
Diode Type
1N 4007
1N 4007
1N 4007
1000 V / 1 A
12, 24 VAC
Diode Reverse Voltage / Current
Indicator Voltage
1000 V / 1 A
110, 220 VAC
1000 V / 1 A
24, 48, 110, 220 VAC
Installation Instructions
Wire Stripping Length
9 mm
9 mm
9 mm
Screwdriver
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey
CDL4U(E)N1/110V 100
CDL4U(E)N1/220V 100
CDL4U(E)LD5/24V 100
CDL4U(E)LD5/48V 100
CDL4U(E)LD5/110V 100
CDL4U(E)LD5/220V 100
CDL4U(E)LD3/12V 100
CDL4U(E)LD3/24V 100
Cat. No.
EPCDL4U
Std. Pk.
50
Cat. No.
EPCDL4U
Std. Pk.
50
Cat. No.
EPCDL4U
Std. Pk.
50
Accessories
End Plate
Spacer
CDL4USP
50
CDL4USP
50
CDL4USP
50
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
50
50
CA702
CA802
50
50
CA702
CA802
50
50
2 pole
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
Internal Jumper
3 pole
4 pole
10 pole
Marking Tag
MT2
1 Pk. (100 tags) MT2
1 Pk. (100 tags) MT2
1 Pk. (100 tags)
44
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
ELECTRONIC COMPONENTS
INDICATOR TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CDL4U(E)LD1/LD2
CDL4U(E)LD4
CDL4U(E)L1/L2
CDL4U(O)
+1
+1
-1
-3
+4
-3
-4
CDL4U(E)LD1
-1
CDL4U(E)L1
+1
+3
+4
CDL4U(E)LD4
CDL4U(O)
+3
+4
-3
-4
CDL4U(E)LD2
CDL4U(E)L2
DC Voltage Indicator with LED
AC Voltage indicator with LED
DC Voltage Indicator with LED
Terminal Block with open
current to solder custom
components
Dimensions & Weight
Width
6 mm
6 mm
6 mm
6 mm
Length
55.5 mm
55.5 mm
55.5 mm
55.5 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
55.7 mm
63.1 mm
55.7 mm
63.1 mm
55.7 mm
63.1 mm
55.7 mm
63.1 mm
Weight per piece
12.4 g
12.4 g
12.4 g
13.0 g
Technical Data/Ratings
Approvals
CB
SCHEME
E220514
E220514
E220514
E220514
60947-7-1
0.2-4 mm2
500 V AC
32 A
60947-7-1
0.2-4 mm2
500 V AC
32 A
60947-7-1
0.2-4 mm2
500 V AC
32 A
60947-7-1
0.2-4 mm2
500 V AC
32 A
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-10 AWG
600 V 300 V
35 A 25 A
7lb-in
22-10 AWG
600 V 300 V
35 A 25 A
7lb-in
22-10 AWG
600 V 300 V
35 A 25 A
7lb-in
22-10 AWG
600 V 300 V
35 A 35 A
7lb-in
0.5Nm
0.5Nm
0.5Nm
0.5Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Electronic Component Specifications
Diode Type
1N 4007
1N 4007
1000 V / 1 A
24, 48 VAC
1N 4007
1000 V / 1 A
6, 24 VAC
1N 4007
1000 V / 1 A
-
Diode Reverse Voltage / Current
Indicator Voltage
1000 V / 1 A
12, 24 VAC
Installation Instructions
Wire Stripping Length
9 mm
9 mm
9 mm
9 mm
Screwdriver
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
100
Grey
CDL4U(E)LD1/12V 100
CDL4U(E)LD1/24V 100
CDL4U(E)LD2/12V 100
CDL4U(E)LD2/24V 100
DL4U(E)LD4/24V 100
DL4U(E)LD4/48V 100
CDL4U(E)L1/6V
CDL4U(E)L1/24V
CDL4U(E)L2/6V
CDL4U(E)L2/24V
100
100
100
100
CDL4U(O)
Cat. No.
EPCDL4U
Std. Pk.
50
Cat. No.
EPCDL4U
Std. Pk.
50
Cat. No.
EPCDL4U
Std. Pk.
50
Cat. No.
EPCDL4U
Std. Pk.
50
Accessories
End Plate
Spacer
CDL4USP
50
CDL4USP
50
CDL4USP
50
CDL4USP
50
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
50
50
CA702
CA802
50
50
CA702
CA802
50
50
CA702
CA802
50
50
2 pole
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
Internal Jumper
3 pole
4 pole
10 pole
Marking Tag
MT2
1 Pk. (100 tags)
MT2
1 Pk. (100 tags) MT2
1 Pk. (100 tags) MT2
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
45
ELECTRONIC COMPONENTS
SURGE SUPPRESSOR TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CDL4U(E)LA
CDL4U(E)3LA
CDL4U(E)RC
HIGHLIGHTS
FEATURES
• Various solutions to protect
single lines against surges
• Lightning Arrestors
(CDL4U(E)LA)
• MOVs (CDL4U(E)MOV)
• RC Circuits (CDL4U(E)RC)
• Suppressor Diode
(CDL4U(E)SD)
CDL4U(E)LA
CDL4U(E)3LA
CDL4U(E)RC
Lightning Arrestor to protect
data and signal lines
3 pole lightning arrestor to
protect line / line and
line / earth surges
RC circuit to protect DC solenoid
valves and contactors
CB
SCHEME
Dimensions & Weight
Width
18 mm
18 mm
18 mm
APPLICATIONS
• Surge suppressor
Length
55.5 mm
55.5 mm
55.5 mm
applications
• Equipment protection
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
55.7 mm
63.1 mm
55.7 mm
63.1 mm
55.7 mm
63.1 mm
Weight per piece
30.0 g
34.2 g
22.4 g
Technical Data/Ratings / Component Specifications
Wire Size (solid / stranded)
Insulation Material
Nominal Current
22-10 AWG
22-10 AWG
22-10 AWG
Polyamide 66
-
Polyamide 66
Polyamide 66
10 A
-
5 A
-
Peak Current
2kA-6.5kA (8/20ms)
Nominal Discharge Current
20 KA (8/20ms)
10 KA (8/20ms)
-
Response Time
Capacitance
100 ns
< 1.5 pf
100 ns
< 1.0 pf
< 25 ns
100 - 20,000 pf
Voltage Rating
75, 90, 230, 600, 1000 V DC
90, 230, 350, 600 V DC
30, 60, 75, 130, 275, 460,
510, 625, 680 V AC
Installation Instructions
Wire Stripping Length
9 mm
9 mm
9 mm
Screwdriver
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Grey
Cat. No.
Std. Pk.
Cat. No.
CDL4U(E)3LA/90V
CDL4U(E)3LA/230V 20
CDL4U(E)3LA/350V 20
CDL4U(E)3LA/600V 20
Std. Pk.
Cat. No.
Std. Pk.
CDL4U(E)LA/75V
CDL4U(E)LA/90V
CDL4U(E)LA/230V
CDL4U(E)LA/600V
20
20
20
20
20
0.1 mF
CDL4U(E)RC0.1
10
0.22 mF
CDL4U(E)RC0.22
10
CDL4U(E)LA/1000V 20
Cat. No.
EPCDL4U
Std. Pk.
50
Cat. No.
EPCDL4U
Std. Pk.
Cat. No.
EPCDL4U
Std. Pk.
Accessories
End Plate
50
50
50
50
Spacer
CDL4USP
CDL4USP
CDL4USP
50
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
50
50
CA702
CA802
50
50
CA702
CA802
50
50
Marking Tag
MT2
1 Pk. (100 tags) MT2
1 Pk. (100 tags) MT2
1 Pk. (100 tags)
46
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
ELECTRONIC COMPONENTS
SURGE SUPPRESSOR TERMINAL BLOCKS
SCREW TERMINAL BLOCKS
CDL4U(E)SD
CDL4U(E)MOV
CTLG2.5(E)MOV
SDUA
SDUK
CDL4U(E)MOV
CTLG2.5(E)MOV
SDB
MOV for voltage surge spike
protection
MOV for voltage surge spike
protection
Suppressor Diode to fine protect
sensors, contacts, etc
CB
SCHEME
Dimensions & Weight
Width
12 mm
6 mm
12 mm
Length
55.5 mm
87.5 mm
55.5 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
55.7 mm
63.1 mm
66.0 mm
74.0 mm
55.7 mm
63.1 mm
Weight per piece
19.2 g
14.8 g
18.0 g
Technical Data/Ratings / Component Specifications
Wire Size (solid / stranded)
Insulation Material
Nominal Current
22-10 AWG
Polyamide 66
-
22-10 AWG
Polyamide 66
5 A
22-10 AWG
Polyamide 66
-
-
Peak Current
2kA-6.5kA (8/20ms)
2kA-6.5kA (8/20ms)
Nominal Discharge Current
-
10 KA (8/20ms)
1.5 KA
Response Time
Capacitance
< 25 ns
< 25 ns
100 - 20,000 pf
Up to 275V
1 ns (D.C) / 5 ns (A.C)
-
100 - 20,000 pf
Voltage Rating
30, 60, 75, 130, 275, 460, 510,
625, 680 V AC
30, 60, 75, 130, 275, 460,
510, 625, 680 V AC
Installation Instructions
Wire Stripping Length
9 mm
9 mm
9 mm
Screwdriver
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey
CDL4U(E)MOV30V
CDL4U(E)MOV60V
CDL4U(E)MOV75V
CDL4U(E)MOV130V 20
CDL4U(E)MOV275V 20
CDL4U(E)MOV460V 20
CDL4U(E)MOV510V 20
CDL4U(E)MOV625V 20
CDL4U(E)MOV680V 20
20
20
20
CTLG2.5(E)MOV30V 20
DC - Anode
CTLG2.5(E)MOV60V 20
CTLG2.5(E)MOV75V 20
CTLG2.5(E)MOV130V 20
CTLG2.5(E)MOV275V 20
CDL4U(E)SDUA12VDC 20
CDL4U(E)SDUA24VDC 20
CDL4U(E)SDUA48VDC 20
DC - Cathode
CDL4U(E)SDUK12VDC 20
CDL4U(E)SDUK24VDC 20
CDL4U(E)SDUK48VDC 20
AC
CDL4U(E)SDB12VAC
CDL4U(E)SDB24VAC
CDL4U(E)SDB48VAC
CDL4U(E)SDB160VAC
Cat. No.
EPCDL4U
Std. Pk.
Cat. No.
EPCDL4U
Std. Pk.
Cat. No.
Std. Pk.
Accessories
End Plate
50
50
EPCTLG2.5
50
–
50
50
Spacer
CDL4USP
–
CDL4USP
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
50
50
CA702
CA802
50
50
CA702
CA802
50
50
Marking Tag
MT2
1 Pk. (100 tags) MT2
1 Pk. (100 tags) MT2
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
47
ACCESSORIES
JUMPER / SHORTING LINKS
SCREW TERMINAL BLOCKS
Internal
Jumper
Insulated
Internal Jumper
External
Jumper
Current
Bar
Shorting Sleeve
& Screws
Poles
2 Pole
3 Pole
Cat. No.
Std. Pk.
100
100
100
10
Cat. No.
CA741/2
CA741/3
CA741/4
CA741/10
CA741/100
CA742/2
CA742/3
CA742/4
CA742/10
CA742/100
CA743/2
CA743/3
CA743/4
CA743/10
CA744/2
CA744/3
CA744/4
CA744/10
CA761/2
CA761/3
CA761/4
CA761/10
CA745/2
CA745/3
CA745/4
CA745/10
CA781/2
CA781/3
CA781/4
CA781/10
-
Std. Pk.
100
100
100
10
10
100
100
100
10
10
100
50
50
10
100
50
50
10
50
50
50
10
50
20
20
10
50
20
20
10
-
Cat. No.
CA717/2
CA717/3
CA717/4
CA717/10
-
CA714/2
CA714/3
CA714/4
CA714/10
-
CA710/2
CA710/3
CA710/4
CA710/10
CA718/2
CA718/3
CA718/4
CA718/10
-
-
-
-
-
-
-
-
-
-
-
-
Std. Pk.
100
100
100
20
-
100
100
100
20
-
100
50
50
20
100
50
50
20
-
Cat. No.
Std. Pk.
100
100
100
100
10
100
100
100
100
10
100
100
100
10
100
100
100
10
100
100
100
10
100
100
100
100
100
100
100
10
Cat. No.
Std. Pk.
CA721/2
CA721/3
CA721/4
CA721/10
CA721/100
CA722/2
CA722/3
CA722/4
CA722/10
CA722/100
CA723/2
CA723/3
CA723/4
CA723/10
CA724/2
CA724/3
CA724/4
CA724/10
CA751/2
CA751/3
CA751/4
CA751/10
CA725/2
CA725/3
CA725/4
CA725/10
CA771/2
CA771/3
CA771/4
CA771/10
CA628/2
CA628/3
CA629/2
CA629/3
CA722/2
CA722/3
CA722/4
CA722/10
CA703/01
CA704/01
CA705/01
CA731/10
CA731/100
CA703/1
CA704/1
CA705/1
CA732/10
CA732/100
CA703/2
CA704/2
CA705/2
CA733/10
CA703/3
CA704/3
CA705/3
CA734/10
CA703/8
CA704/8
CA705/8
CA739/10
CA703/4
CA704/4
CA705/4
CA735/10
CA703/10
CA704/10
CA705/10
CA770/10
-
4 Pole
10 Pole
100 Pole
2 Pole
3 Pole
4 Pole
10 Pole
100 Pole
2 Pole
3 Pole
4 Pole
10 Pole
2 Pole
3 Pole
4 Pole
10 Pole
2 Pole
3 Pole
4 Pole
10 Pole
2 Pole
3 Pole
4 Pole
10 Pole
2 Pole
3 Pole
4 Pole
10 Pole
2 Pole
3 Pole
2 Pole
3 Pole
2 Pole
3 Pole
4 Pole
10 Pole
CA707/S/Q/01 100
CTS2.5U-N
10
100
100
100
10
10
100
50
50
10
100
50
50
10
50
50
50
10
50
20
20
CTS4U-N, CCC4U, CMC1-2,
CMC2-2, CDL4UN, CDL4U(I.S)
CDLG4, CDLG(I.S), CF4SP,
CF4SP(L), CKT4U1, CKT4SP
CA707/S/Q/01 100
CTS6U, CDS6U
CA707/S/Q/1
CA707/S/Q/1
CA707/S/Q/1
CA707/S/Q/2
CA707/S/Q/2
100
100
100
100
100
CDTTU1, CDTTU-SH1
CTS10U
CTS16U
CTS25UN
CTS35UN
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10
50
20
20
10
10
10
10
-
-
-
-
-
-
-
-
-
-
-
-
CTS50/70N
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
CTS95/120N
10
100
100
100
10
CA715/2
CA715/3
CA715/4
CA715/10
-
CA714/2
CA714/3
CA714/4
CA714/10
-
CA715/2
CA715/3
CA715/4
CA715/10
CA711/2
CA711/3
CA711/4
CA711/10
CA711/2
CA711/3
CA711/4
CA711/10
CA716/2
CA716/3
CA716/4
CA716/10
-
100
100
100
20
-
100
100
100
20
-
100
100
100
20
100
50
50
20
100
50
50
20
50
50
50
20
-
CA703/1
CA704/1
CA705/1
CA732/10
CA732/100
CA703/1
CA704/1
CA705/1
CA732/10
CA732/100
CA703/1
CA704/1
CA705/1
CA732/10
-
100
100
100
100
10
100
100
100
100
10
100
100
100
10
-
-
CTL2.5U, CTL2.5U(L)
CTL2.5U-H, CTL2.5U-H(L)
CTL2.5U(I.S)
CA707/S/Q/01 100
100 Pole2 CA722/100
10
2 Pole
3 Pole
4 Pole
10 Pole
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
CA747/2
CA747/3
CA747/4
CA747/10
CA747/100
-
-
-
-
-
-
-
100
100
100
10
10
-
-
-
-
-
ODL4U
CDL4U(E)
CMT4
CA607/S/Q
100
CMB4
100 Pole2 CA727/100
10
2 Pole
3 Pole
4 Pole
10 Pole
2 Pole
3 Pole
4 Pole
10 Pole
2 Pole
3 Pole
4 Pole
10 Pole
2 Pole
3 Pole
4 Pole
10 Pole
2 Pole
3 Pole
4 Pole
10 Pole
2 Pole
3 Pole
4 Pole
10 Pole
2 Pole
3 Pole
4 Pole
10 Pole
CA627/2
CA627/3
CA627/4
CA627/10
-
100
100
100
10
-
-
CDLG2.5
CTLG2.5
CA611/S/Q
-
100
-
CF4U1
-
-
-
-
-
-
-
-
-
CF4U(L)1
-
-
-
-
-
CA729/2
CA729/3
CA729/4
CA729/10
-
100
50
50
10
-
-
-
-
100
100
100
10
100
100
100
10
100
100
100
10
CA749/2
CA749/3
CA749/4
CA749/10
100
50
50
10
-
-
-
-
-
-
-
-
-
-
-
-
-
CA703/6
CA704/6
CA705/6
CA737/10
-
-
-
-
-
-
-
-
-
-
100
100
100
100
-
-
-
-
-
-
-
-
-
-
DDFL4U, DDFL4U(E)
DDFL4ULR, DDFL4ULR(E)
CSDL4U1, DDDL4U
CA707/S/Q/3
-
100
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
CAFL4U1
-
-
-
CAFL4U(L)1
CAFL4U(N)1
CA623/2
CA623/3
CA623/4
CA623/10
CA624/2
CA624/3
CA624/4
CA624/10
CA625/2
CA625/3
CA625/4
CA625/10
-
-
-
CHV4U
CTS4USC
-
-
-
-
-
-
-
-
-
-
-
CHV6U
CTS6USC
-
1 Internal shorting system not available.
-
-
-
-
-
2 100 pole strip is breakable into any number of poles needed.
CHV10U
CTS10USC
-
-
-
-
-
-
48
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
ACCESSORIES
VARIOUS ACCESSORIES
ENDPLATES
SCREW TERMINAL BLOCKS
PARTITION PLATES
Terminal Block
Cat. No.
Dimensions
Std. Pk.
Terminal Block
Cat. No.
Dimensions
Std. Pk.
CTS2.5U-N, CTS4U-N
CTT2.5UK/J/T/E
CTS6U, CTS10U
CTS25UN
CTS2.5U-N, CTS4U-N
EP2.5/4UN
32 x 39 x 1.5mm
50
PP2.5/4UN
37 x 44 x 1.6mm
50
CTT2.5UK/J/T/E
CCTS6U, CTS10U
CMC1-2
EP6/10U
EPCMC1-2
EPCMC2-2
EPCDL4UN
EPCDLG2.5
EPCTLG2.5
EPODL4U (Front)
EP1ODL4U (Back)
31 x 42.5 x 1.5mm
35.5 x 46.5 x 2.5mm
40.5 x 65 x 2.5mm
47.5 x 57 x 1.5mm
48 x 71.4 x 1.2mm
62.5 x 87.5 x 1.2mm
49 x 86 x 5.5mm
24 x 68 x 3mm
52 x 48.5 x 1.5mm
55.5 x 84 x 1.5mm
55.5 x 61 x 1.5mm
32 x 72 x 1.5mm
37.2 x 82 x 1.5mm
30.5 x 46.5 x 2.5mm
65 x 38.3 x 1.5mm
41 x 63 x 3mm
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
PP6/10U
PP25UN
PP35UN
PPCMT4
37.5 x 56 x 1.5mm
42.5 x 62 x 1mm
50 x 64.5 x 1mm
32 x 37 x 1.6mm
50
50
50
50
CMC2-2, CMCG4
CDL4UN, CDLG4
CDLG2.5
CTS35UN
CMT4
CTLG2.5
ODL4U
CHV Series, CTSUSC Series EPUSC
CTL2.5U Series
CTL2.5U-H Series
CAFL4U Series
CDS6U
CKT4U
EPCKT4U
CDTTU Series
CSDL4U
DDDL4U, DDFL4U
CDL4U(E)
CTC4U
CMT4
EPCTL2.5U
EPCTL2.5U-H
EPCAFL4U
EPCDS6U
EPCKT4U
EPCKT4U/4
EPCDTTU
EPCSFL4U
EPDDFL4U
EPCDL4U
EPCTC4U
EPCMT4
SEPARATOR PLATES
Terminal Block
Cat. No.
Dimensions
Std. Pk.
CTS2.5U-N, CTS4U-N
CTT2.5UK/J/T/E
CTS6U, CTS10U, CTS16U
CSL4UN, CDL4UN(I.S.)
CBM4
SP2.5/4UN
17.5 x 17.4 x 1.4mm
100
28 x 55.5 x 1.6mm
49 x 87.6 x 3mm
43 x 55 x 2.4mm
34.5 x 47 x 2.5mm
23 x 27 x 1.5mm
27 x 27 x 7mm
SP6/10U
SPCDL4U
SPCMB4
15.4 x 16.2 x 1.5mm
15.4 x 16.2 x 1.6mm
14.5 x 12 x 1.5mm
11 x 10.5 x 1
100
100
100
100
CDLG2.5
SPCDLG2.5
CMB4
ODL2.5 Series
EPCMB4
EPODL2.5
EP1ODL2.5
49 x 59 x 4.6mm
23 x 59 x 2.5mm
END STOPS
CA202
CA802
CA702
CA102
Cat. No.
CA202
Dimensions
44.5 x 50 x 9.5mm
Std. Pk. Cat. No.
50 CA802
Dimensions
45 x 32 x 8mm
Std. Pk. Cat. No.
Dimensions
34 x 45 x 9mm
Std. Pk. Cat. No.
Dimensions
80 x 46 x 9mm
Std. Pk.
50
50
CA702
50
CA102
PROTECTIVE COVER
CTSPC COVER
SUPPORT PLATE
Length
Cat. No.
Length
40mm
90mm
100mm
130mm
150mm
200mm
300mm
330mm
Std. Pk.
Cat. No.
CSP1
Std. Pk.
50
CTSPC/40
CTSPC/90
CTSPC/100
CTSPC/130
CTSPC/150
CTSPC/200
CTSPC/300
CTSPC/330
2
2
2
2
2
2
2
2
Assembled Block installed
with Protective Cover
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
49
OVERVIEW
INTRODUCTION
LUG TYPE TERMINALS
LUG/ STUD TYPE CONNECTION TECHNOLOGY
• Accepts Ring/ Fork Lug Cable Lugs
• Withstands severe vibration
• Reliable Gas-tight connection
• For very large wire sizes (up to 350 kcmil)
• High Torque values
• Secure connection
• Hinged cover featuring captive nut system
guarantees quick and easy ring lug wiring
E220514
60947-7-1
MATERIAL SPECIFICATIONS
Polyamide 66 Specifications
Upper Temperature Limit: 105°C
Lower Temperature Limit: -50°C
Terminal Block Housing
• Polyamide PA66 Housing
• Self-extinguishing
Current Carrying Metal
Corrosion free material
sing
d/ Bolt
• Bolt: zinc chromate
passivated steel
Flammability UL94:
Volume Resistivity:
Surface Resistivity:
V2/ V0
• High mechanical strength
rent Bar
1012 Ω cm
1010 Ω
• Nut/ Screw: zinc chromate
passivated steel
• Current Bar: nickel plated
copper alloy/ tin plated
copper
INSTALLATION GUIDELINES
Secure
Connection
1 Remove screw/ nut by using wrench/ hex nut driver
2 Place cable with ring/ fork cable lug on stud
3 Tighten screw/ nut to specified torque by using
wrench/hex nut driver
1
2
3
RING LUG TERMINAL CONNECTION TYPES AND FEATURES
Slotted Hex
Nut Terminal
Disconnect &
erminals
T
est
T
Phillips Screw
Termin
Large Center
Marking Area
ut
Power Terminal
inge Type Captive
ut Terminal
Hex Nut
Terminal
50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-94
00 • FAX (908)806-9490
OVERVIEW
SELECTION GUIDE
STUD / RING LUG TERMINALS
Phillips
Screw
Slotted
Hex Nut
Ring Lug Barrier Terminal Blocks
FEATURES
• Phillips Screw (CBS Series)
• Slotted Hex Nut (CSB Series)
• 22-4 AWG
CSB Series
page 53
CBS Series
page 52
• Up to 85A
Hex
Nut
Slotted
Hex Nut
Ring Lug Stud Terminal Blocks
FEATURES
• Hex Nut (CSTSN Series)
• Slotted Hex Nut (CSTSB Series)
• 22-2 AWG
CSTSB Series
page 55
CSTSN Series
page 54
• Up to 125A
Captive
Nut
Ring Lug Hinge Terminal Blocks
FEATURES
• Captive Nut Built-In Hinge
• Feed-Through Terminals
• Disconnect Terminals
• 22-2 AWG
Feed-Through
page 56
Disconnect
page 57
• Up to 115A
Ring Lug Power Terminal Blocks
FEATURES
• Nut/Bolt Connection
• Threaded Current Bar
• 10 AWG - 350 kcmil
• up to 310A
Nut/Bolt Connection
Threaded Current Bar
CBB Series
page 58-59
High Current Power Terminal Blocks
FEATURES
• Captive Bolt System
• 8-4/0 AWG
• Up to 230A
• Protective Cover
• Stackable
PTB Series
page 60
Accessories
page 61
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
51
CBS SERIES
BARRIER RING LUG TERMINAL BLOCKS
- PHILLIPS SCREW
STUD / RING LUG TERMINALS
CBS3U
CBS4U
CBS5U
HIGHLIGHTS
FEATURES
• Various sizes
50 A Ring Lug Terminal
Phillips Screw Head
65 A Ring Lug Terminal
Phillips Screw Head
85 A Ring Lug Terminal
Phillips Screw Head
• Wire size up to 4 AWG
Dimensions & Weight
Width
• Current rating up to 85 A
• Suitable for standard fork
type / ring lug connectors
• Version with standard
Phillips Screw
(CBS Series)
• Version with slotted nut
(CSB Series)
• Compact design
• 2, 3, 4 pole fork type and
ring lug jumpers
9 mm
13 mm
13 mm
Length
49 mm
49 mm
49 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
38 mm
45.5 mm
38 mm
45.5 mm
38 mm
45.5 mm
Weight per piece
7.4 g
12.4 g
13.8 g
Technical Data/Ratings
Approvals
E220514
60947-7-1
E220514
60947-7-1
E220514
60947-7-1
1.5-16 mm2
1000V AC/DC
76 A
1.5-10 mm2
1000V AC/DC
57 A
16-4 AWG
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-8 AWG
600 V
0.5-6 mm2
1000V AC/DC
41 A
16-6 AWG
600 V
APPLICATIONS
• Applications with vibration
• Machinery
• Transportation
• Vehicles
600 V
85 A
50 A
65 A
4.5lb-in
0.5Nm
10lb-in
1.2Nm
25lb-in
2.0Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
• Provides solution when
ring / fork lug is needed
• Compact / Space saving
Panels
nstallation Instructions
Wire Stripping Length
–
–
–
Screw / Stud Size
Screwdriver
M3
M4
M5
Phillips #2
Phillips #2
Phillips #2
Terminal Blocks
Grey (standard)
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
CBS3U
50
50
50
50
50
50
50
50
CBS4U
50
50
50
50
50
50
50
50
CBS5U
50
50
50
50
50
50
50
50
Red
R
CBS3U/R
CBS3U/BU
CBS3U/BL
CBS3U/O
CBS3U/G
CBS3U/Y
CBS3U/W
CBS4U/R
CBS4U/BU
CBS4U/BL
CBS4U/O
CBS4U/G
CBS4U/Y
CBS4U/W
CBS5U/R
CBS5U/BU
CBS5U/BL
CBS5U/O
CBS5U/G
CBS5U/Y
CBS5U/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
EPCBS3U
50
EPCBS3U
50
50
Accessories
End Plate
EPCBS3U
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA802
50
CA802
CA802
50
50
2 pole
3 pole
4 pole
Insulated
Jumper
Fork Type
CA514/15-2
CA514/15-3
CA514/15-4
100
50
50
CA514/2-2
CA514/2-3
CA514/2-4
100
50
50
CA514/2-2
CA514/2-3
CA514/2-4
100
50
50
Insulated
Jumper
Ring Lug
2 pole
3 pole
4 pole
CA514/17-2
CA514/17-3
CA514/17-4
100
50
50
CA514/4-2
CA514/4-3
CA514/4-4
100
50
50
CA514/4-2
CA514/4-3
CA514/4-4
100
50
50
2 pole
3 pole
Internal Jumper
CA728/2
CA728/3
CA728/4
CA728/10
100
100
100
10
CA772/2
CA772/3
CA772/4
CA772/10
100
100
100
10
CA772/2
CA772/3
CA772/4
CA772/10
100
100
100
10
4 pole
10 pole
2 Terminal
3 Terminal
4 Terminal
100 mm
Protective Cover
–
–
CSTSPC2
CSTSPC2-1
–
CSTSPC1-2
CSTSPC1-3
CSTSPC1-4
CSTSPC2
CSTSPC2-1
–
CSTSPC1-2
CSTSPC1-3
CSTSPC1-4
10
10
–
10
10
10
10
10
–
10
10
10
CSTSPC2
CSTSPC2-1
CSTSPC1-2
CSTSPC1-3
CSTSPC1-4
10
10
10
10
10
200 mm
300 mm
Marking Tag
MT9
1 Pk. (100 tags) MT9
1 Pk. (100 tags) MT9
1 Pk. (100 tags)
52
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-94
00 • FAX (908)806-9490
CSB SERIES
BARRIER RING LUG TERMINAL BLOCKS - SLOTTED NUT
STUD / RING LUG TERMINALS
CSB5/N5U
CSB3/N3U
CSB3/N3UL
CSB4/N4U
85 A Ring Lug Terminal
Slotted Hex Nut
50 A Ring Lug Terminal
Slotted Hex Nut
50 A Ring Lug Terminal
Long Slotted Hex Nut
65 A Ring Lug Terminal
Slotted Hex Nut
Dimensions & Weight
13 mm
Width
9 mm
9 mm
13 mm
49 mm
Length
49 mm
49 mm
49 mm
38 mm
45.5 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
38 mm
45.5 mm
38 mm
45.5 mm
38 mm
45.5 mm
19.0 g
Weight per piece
10.2 g
11.7 g
19.0 g
Technical Data/Ratings
Approvals
60947-7-1
E220514
60947-7-1
E220514
60947-7-1
E220514
60947-7-1
E220514
16-4 AWG
600 V
1.5-16 mm2
1000V AC/DC
76 A
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-8 AWG
600 V
0.5-6 mm2
1000V AC/DC
41 A
22-8 AWG
600 V
0.5-6 mm2
1000V AC/DC
41 A
16-6 AWG
600 V
1.5-10 mm2
1000V AC/DC
57 A
85 A
50 A
50 A
65 A
25lb-in
2.0Nm
4.5lb-in
0.5Nm
4.5lb-in
0.5Nm
10lb-in
1.2Nm
Polyamide 66
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
–
M5
–
M3
–
M4
Wire Stripping Length
–
M3
Screw / Stud Size
Screwdriver
Flat Head 1.0 x 5.5 mm
Hex Nut Driver 7 mm
Flat Head 1.0 x 5.5 mm
Flat Head 1.0 x 5.5 mm
Terminal Blocks
Grey (standard)
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
CSB3/N3U
50
50
50
50
50
50
50
50
CSB3/N3UL
50
50
50
50
50
50
50
50
CSB4/N4U
50
50
50
50
50
50
50
50
CSB5/N5U
50
50
50
50
50
50
50
50
Red
R
CSB3/N3U/R
CSB3/N3U/BU
CSB3/N3U/BL
CSB3/N3U/O
CSB3/N3U/G
CSB3/N3U/Y
CSB3/N3U/W
CSB3/N3UL/R
CSB3/N3UL/BU
CSB3/N3UL/BL
CSB3/N3UL/O
CSB3/N3UL/G
CSB3/N3UL/Y
CSB3/N3UL/W
CSB4/N4U/R
CSB4/N4U/BU
CSB4/N4U/BL
CSB4/N4U/O
CSB4/N4U/G
CSB4/N4U/Y
CSB4/N4U/W
CSB5/N5U/R
CSB5/N5U/BU
CSB5/N5U/BL
CSB5/N5U/O
CSB5/N5U/G
CSB5/N5U/Y
CSB5/N5U/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
EPCBS3U
50
EPCBS3U
50
EPCBS3U
50
EPCBS3U
50
Acesorie
End Plate
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA802
50
CA802
50
CA802
50
CA802
50
2 pole
3 pole
4 pole
100
50
50
CA514/2-2
CA514/2-3
CA514/2-4
100
50
50
CA514/2-2
CA514/2-3
CA514/2-4
100
50
50
Insulated
Jumper
Fork Type
CA514/15-2
CA514/15-3
CA514/15-4
100
50
50
CA514/15-2
CA514/15-3
CA514/15-4
CA514/17-2
CA514/17-3
CA514/17-4
100
50
50
CA514/4-2
CA514/4-3
CA514/4-4
100
50
50
Insulated
Jumper
Ring Lug
2 pole
3 pole
4 pole
CA514/17-2
CA514/17-3
CA514/17-4
100
50
50
100
50
50
CA514/4-2
CA514/4-3
CA514/4-4
2 pole
3 pole
CA772/2
CA772/3
CA772/4
CA772/10
100
100
100
10
Internal Jumper
CA728/2
CA728/3
CA728/4
CA728/10
100
100
100
10
CA728/2
CA728/3
CA728/4
CA728/10
100
100
100
10
CA772/2
CA772/3
CA772/4
CA772/10
100
100
100
10
4 pole
10 pole
2 Terminal
3 Terminal
4 Terminal
100 mm
CSTSPC2
CSTSPC2-1
–
CSTSPC1-2
CSTSPC1-3
CSTSPC1-4
10
10
–
10
10
10
Protective Cover
Marking Tag
–
–
–
–
CSTSPC2
CSTSPC2-1
–
CSTSPC1-2
CSTSPC1-3
CSTSPC1-4
10
10
–
10
10
10
CSTSPC2
CSTSPC2-1
CSTSPC1-2
CSTSPC1-3
CSTSPC1-4
10
10
10
10
10
CSTSPC2
CSTSPC2-1
CSTSPC1-2
CSTSPC1-3
CSTSPC1-4
10
10
10
10
10
200 mm
300 mm
1 Pk. (100 tags)
MT9
1 Pk. (100 tags) MT9
1 Pk. (100 tags)
MT9
1 Pk. (100 tags) MT9
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
53
CSTSN SERIES
STUD TYPE RING LUG TERMINAL BLOCKS
STUD / RING LUG TERMINALS
CSTSN4U
CSTSN5U
CSTSN6U
HIGHLIGHTS
FEATURES
• Various sizes
65 A Bolt Terminal
M4 Hex Nut
80 A Bolt Terminal
M5 Hex Nut
125 A Bolt Terminal
M6 Hex Nut
• Wire size up to 2 AWG
• Current rating up to 125 A Dimensions & Weight
• Suitable for standard fork
Width
17 mm
17 mm
17 mm
type / ring lug connectors
Length
50 mm
50 mm
50 mm
• Version with standard Hex
Nut (CSTSN Series)
• Version with slotted barrel
(CSTSB Series)
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
40.7 mm
48.0 mm
40.7 mm
48.0 mm
40.7 mm
48.0 mm
Weight per piece
21.5 g
23.4 g
30.4 g
• Compact design
Technical Data/Ratings
Approvals
• 2, 3, 4 pole fork type and
ring lug jumpers
CB
SCHEME
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-6 AWG
1.5-10 mm2
1000V AC/DC
57 A
22-4 AWG
1.5-16 mm2
1000V AC/DC
76 A
22-2 AWG
1.5-35 mm2
1000V AC/DC
125 A
APPLICATIONS
• Applications with vibration
• Machinery
600 V
65 A
600 V
80 A
600 V
125 A
25lb-in
• Transportation
14lb-in
1.2Nm
25lb-in
2.0Nm
3.0Nm
• Vehicles
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
• Provides solution when
ring / fork lug is needed
• Compact / Space saving
Panels
nstallation Instructions
Wire Stripping Length
–
M4
–
M5
–
M6
Screw / Stud Size
Screwdriver
Hex Nut Driver 7 mm
Hex Nut Driver 8 mm
Hex Nut Driver 9 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CSTSN4U
100
100
100
100
100
100
100
100
CSTSN5U
100
100
100
100
100
100
100
100
CSTSN6U
100
100
100
100
100
100
100
100
Red
R
CSTSN4U/R
CSTSN4U/BU
CSTSN4U/BL
CSTSN4U/O
CSTSN4U/G
CSTSN4U/Y
CSTSN4U/W
CSTSN5U/R
CSTSN5U/BU
CSTSN5U/BL
CSTSN5U/O
CSTSN5U/G
CSTSN5U/Y
CSTSN5U/W
CSTSN6U/R
CSTSN6U/BU
CSTSN6U/BL
CSTSN6U/O
CSTSN6U/G
CSTSN6U/Y
CSTSN6U/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPCSTSU
Std. Pk.
50
Cat. No.
EPCSTSU
Std. Pk.
50
Cat. No.
EPCSTSU
Std. Pk.
50
Accessories
End Plate
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA802
50
CA802
CA802
50
50
2 pole
3 pole
4 pole
Insulated
Jumper
Fork Type
CA514/1-2
CA514/1-3
CA514/1-4
100
50
50
CA514/1-2
CA514/1-3
CA514/1-4
100
50
50
CA514/7-2
CA514/7-3
CA514/7-4
100
50
50
Jumper
Ring Lug
2 pole
3 pole
4 pole
CA514/3-2
CA514/3-3
CA514/3-4
100
50
50
CA514/3-2
CA514/3-3
CA514/3-4
100
50
50
CA514/8-2
CA514/8-3
CA514/8-4
100
50
50
2 Terminal
3 Terminal
4 Terminal
100 mm
Protective Cover
Marking Tag
CSTSPC2
CSTSPC2-1
–
CSTSPC1-2
CSTSPC1-3
CSTSPC1-4
10
10
–
10
10
10
CSTSPC2
CSTSPC2-1
–
CSTSPC1-2
CSTSPC1-3
CSTSPC1-4
CSTSPC2
CSTSPC2-1
–
CSTSPC1-2
CSTSPC1-3
CSTSPC1-4
10
10
–
10
10
10
10
10
–
10
10
10
200 mm
300 mm
MT2B4
1 Pk. (100 tags) MT2B4
1 Pk. (100 tags) MT2B4
1 Pk. (100 tags)
54
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-94
00 • FAX (908)806-9490
CSTSB SERIES
STUD TYPE RING LUG TERMINAL BLOCKS
STUD / RING LUG TERMINALS
CSTSB4U
CSTSB5U
65 A Bolt Terminal
Slotted Barrel
65 A Bolt Terminal
Slotted Barrel
Dimensions & Weight
Width
17 mm
17 mm
Length
50 mm
50 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
40.7 mm
48.0 mm
40.7 mm
48.0 mm
Weight per piece
24 g
25.5 g
Technical Data/Ratings
Approvals
CB
SCHEME
60947-7-1
60947-7-1
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-6 AWG
1.5-10 mm2
1000V AC/DC
57 A
22-4 AWG
1.5-16 mm2
1000V AC/DC
76 A
600 V
65 A
600 V
80 A
14lb-in
1.2Nm
25lb-in
2.0Nm
Insulation Material
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screw / Stud Size
–
M4
–
M5
Screwdriver
Flat Head 1.0 x 5.5 mm
Fla
t Head 1.0 x 5.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CSTSB4U
100
100
100
100
100
100
100
100
CSTSB5U
100
100
100
100
100
100
100
100
Red
R
CSTSB4U/R
CSTSB4U/BU
CSTSB4U/BL
CSTSB4U/O
CSTSB4U/G
CSTSB4U/Y
CSTSB4U/W
CSTSB5U/R
CSTSB5U/BU
CSTSB5U/BL
CSTSB5U/O
CSTSB5U/G
CSTSB5U/Y
CSTSB5U/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPCSTSU
Std. Pk.
50
Cat. No.
EPCSTSU
Std. Pk.
50
Accessories
End Plate
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA802
50
CA802
50
2 pole
3 pole
4 pole
Insulated
Jumper
Fork Type
CA514/1-2
CA514/1-3
CA514/1-4
100
50
50
CA514/1-2
CA514/1-3
CA514/1-4
100
50
50
Insulated
Jumper
Ring Lug
2 pole
3 pole
4 pole
CA514/3-2
CA514/3-3
CA514/3-4
100
50
50
CA514/3-2
CA514/3-3
CA514/3-4
100
50
50
2 Terminal
3 Terminal
4 Terminal
100 mm
Protective Cover
CSTSPC2
CSTSPC2-1
–
CSTSPC1-2
CSTSPC1-3
CSTSPC1-4
10
10
–
10
10
10
CSTSPC2
CSTSPC2-1
–
CSTSPC1-2
CSTSPC1-3
CSTSPC1-4
10
10
–
10
10
10
200 mm
300 mm
Marking Tag
MT2B4
1 Pk. (100 tags) MT2B4
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
55
STH SERIES
HINGE TYPE RING LUG TERMINAL BLOCKS
STUD / RING LUG TERMINALS
STH3
STH4
STH6
HIGHLIGHTS
FEATURES
Dimensions & Weight
Width
• Bolt Feed Through
9 mm
11 mm
18 mm
Terminals
• Suitable for standard fork
type / ring lugs
• Captive nut system
• Only standard flat head
screw driver needed to
tighten connection
• IP20 touch proof terminals
with hinged plastic cover
• 2, 3, 4 pole fork type and
ring lug jumpers
Length
47 mm
46 mm
64 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
47.3 mm
54.8 mm
52.2 mm
59.0 mm
63.1 mm
70.6 mm
Weight per piece
15.0 g
62.5 g
57.8 g
Technical Data/Ratings
Approvals
CB
SCHEME
E220514
60947-7-1
E220514
60947-7-1
E220514
60947-7-1
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-8 AWG
1.5-6 mm2
1000V AC/DC
41 A
22-8 AWG
1.5-6 mm2
1000V AC/DC
41 A
22-2 AWG
1.5-35 mm2
1000V AC/DC
125 A
600 V
50 A
600 V
50 A
600 V
115 A
25lb-in
APPLICATIONS
• Applications with vibration
• Machinery
• Transportation
• Vehicles
• Provides solution when
ring / fork lug is needed
4.5lb-in
0.5Nm
14lb-in
1.2Nm
3.0Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
–
M3
–
M4
–
M6
Screw / Stud Size
Screwdriver
Flat Head 0.8 x 4 mm
Flat Head 0.8 x 4 mm
Flat Head 1.0 x 5.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
STH3
100
100
100
100
100
100
100
100
STH4
50
50
50
50
50
50
50
50
STH6
50
50
50
50
50
50
50
50
Red
R
STH3/R
STH3/BU
STH3/BL
STH3/O
STH3/G
STH3/Y
STH3/W
STH4/R
STH4/BU
STH4/BL
STH4/O
STH4/G
STH4/Y
STH4/W
STH6/R
STH6/BU
STH6/BL
STH6/O
STH6/G
STH6/Y
STH6/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPSTH3
Std. Pk.
50
Cat. No.
EPSTH4
Std. Pk.
50
Cat. No.
EPSTH6
Std. Pk.
50
Accessories
End Plate
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
100
50
50
CA702
CA802
CA202
100
50
50
CA702
CA802
CA202
100
50
50
2 pole
3 pole
4 pole
Jumpers
Fork Type
CA512/15-2
CA512/15-3
CA512/15-4
100
50
50
CA512/13-2
CA512/13-3
CA512/13-4
100
50
50
–
–
–
–
–
–
2 pole
3 pole
4 pole
Insulated
Jumpers
Fork Type
CA514/15-2
CA514/15-3
CA514/15-4
100
50
50
CA514/13-2
CA514/13-3
CA514/13-4
100
50
50
–
–
–
–
–
–
2 pole
3 pole
4 pole
Jumpers
Ring Lug
CA512/17-2
CA512/17-3
CA512/17-4
100
50
50
CA512/14-2
CA512/14-3
CA512/14-4
100
50
50
–
–
–
–
–
–
2 pole
3 pole
4 pole
Insulated
Jumpers
Ring Lug
CA514/17-2
CA514/17-3
CA514/17-4
100
50
50
CA514/14-2
CA514/14-3
CA514/14-4
100
50
50
–
–
–
–
–
–
2 pole
3 pole
Internal
Jumpers
CA773/2
CA773/3
CA773/4
CA773/10
100
50
50
–
–
–
–
–
–
–
–
CA774/2
CA774/3
CA774/4
–
100
50
50
–
4 pole
10 pole
10
Marking Tag
MT8
1 Pk. (100 tags)
MT10
1 Pk. (100 tags)
MT16
1 Pk. (100 tags)
56
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
STH SERIES
HINGE TYPE DISCONNECT & TEST TERMINAL BLOCKS
STUD / RING LUG TERMINALS
STH4DT
STH4DTSH
STH4DTFT
HIGHLIGHTS
FEATURES
• Bolt Disconnect Terminals
• Disconnect (STH4DT)
• 2 Shorted Disconnect
Terminals (STH4DTSH)
• Feed-Through with same
profile (STH4DTFT)
Disconnect Terminal Block
Hinge Type
Double Disconnect Terminal
Block
Feed-Through Terminal Block
Disconnect Profile
Dimensions & Weight
Width
11 mm
22 mm
11 mm
• Suitable for standard fork
type / ring lugs
86 mm
86 mm
86 mm
Length
52.2 mm
59.0 mm
52.2 mm
59.0 mm
52.2 mm
59.0 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
• Captive nut system
• IP20 touch proof terminals
with hinged plastic cover
• 2, 3, 4 pole fork type and
ring lug jumpers
42.8 g
42.3 g
36.6 g
Weight per piece
Technical Data/Ratings
Approvals
CB
SCHEME
60947-7-1
1.5-6 mm2
1000V AC/DC
41 A
60947-7-1
1.5-6 mm2
1000V AC/DC
34 A
60947-7-1
1.5-6 mm2
1000V AC/DC
41 A
E220514
E220514
E220514
APPLICATIONS
• Disconnect / Test
Applications
22-8 AWG
22-8 AWG
22-8 AWG
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
600 V
35 A
300 V
25 A
600 V
50 A
• Measuring / Control Circuit
• Utility Instruments and
Transformer Applications
• Meter Replacement
• External Current
14lb-in
1.2Nm
14lb-in
1.2Nm
14lb-in
1.2Nm
Polyamide 66
Polyamide 66
Polyamide 66
Insulation Material
Installation Instructions
Wire Stripping Length
Measurement
–
M4
–
M4
–
M4
Screw / Stud Size
Screwdriver
Flat Head 0.8 x 4 mm
Flat Head 0.8 x 4 mm
Flat Head 0.8 x 4 mm
Terminal Blocks
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
24
Cat. No.
Std. Pk.
100
Grey
STH4DT
STH4DTSH
STH4DTFT
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Accessories
End Plate
EPSTH4DT
EPSTH4DT
EPSTH4DT
Disconnect /
Test Application
for Metering CT
DIN Rail
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
2511120
CA701-15/S
2511160
20
20
10
End Stop
CA702
CA802
CA202
100
50
50
CA702
CA802
CA202
100
50
50
CA702
CA802
CA202
100
50
50
STH4DT
Disconnect
Terminal
LCSTH4DT
Lockout Cap
2 pole
3 pole
4 pole
Jumpers
Fork Type
CA512/13-2
CA512/13-3
CA512/13-4
100
50
50
CA512/13-2
CA512/13-3
CA512/13-4
100
50
50
CA512/13-2
CA512/13-3
CA512/13-4
100
50
50
2 pole
3 pole
4 pole
Insulated
Jumpers
Fork Type
CA514/13-2
CA514/13-3
CA514/13-4
100
50
50
CA514/13-2
CA514/13-3
CA514/13-4
100
50
50
CA514/13-2
CA514/13-3
CA514/13-4
100
50
50
2 pole
3 pole
4 pole
Jumpers
Ring Lug
CA512/14-2
CA512/14-3
CA512/14-4
100
50
50
CA512/14-2
CA512/14-3
CA512/14-4
100
50
50
CA512/14-2
CA512/14-3
CA512/14-4
100
50
50
2 pole
3 pole
4 pole
Insulated
Jumpers
Ring Lug
CA514/14-2
CA514/14-3
CA514/14-4
100
50
50
CA514/14-2
CA514/14-3
CA514/14-4
100
50
50
CA514/14-2
CA514/14-3
CA514/14-4
100
50
50
QJ11/2
Shorting Plug
3 pole
4 pole
Insulated
Alternate
Jumpers
CA514/14-3A
CA514/14-4A
10
10
CA514/14-3A
CA514/14-4A
10
10
CA514/14-3A
CA514/14-4A
10
10
CA514/14-3
Shorting Plug
Lock Out Cap
Marking Tag
QJ11/2
LCSTH4DT
MT10
25
25
QJ11/2
LCSTH4DT
MT10
25
25
–
–
–
–
1 Pk. (100 tags)
1 Pk. (100 tags)
MT10
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
57
CBB SERIES
RING LUG POWER TERMINAL BLOCKS
STUD / RING LUG TERMINALS
CBB35/50
CBB70
CBB95
CBB35/50LS
CBB70LS
CBB95LS
HIGHLIGHTS
FEATURES
• High Current up to 310A
• Feed-Through Terminals
• Nut / Bolt version
150 A Feed Through
Power Terminal
175 A Feed Through
Power Terminal
230 A Feed Through
Power Terminal
• Version with threaded
current bar (LS) for fast
wiring without 2
imensions & Weight
Width
32 mm
38 mm
38 mm
Length
75 mm
92 mm
92 mm
wrenches
• Wire crimped into ring /
fork lug on to the flat cur-
rent bar
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
47.5 mm
54.5 mm
47.5 mm
54.5 mm
47.5 mm
54.5 mm
Weight per piece
82.0 g
157.5 g
193.0 g
• Special Mounting foot
design for tight fit on rail
• Protective Cover in vari-
ous length
echnical Data/Ratings
Approvals
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
E220514
• 2, 3 pole jumper bars
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
10-1/0 AWG
600 V
6-50.0 mm2
1000V AC/DC
150 A
8-2/0 AWG
6-70.0 mm2
1000V AC/DC
192 A
8-4/0 AWG
16-95.0 mm2
1000V AC/DC
232 A
600 V
175 A
600 V
230 A
90lb-in
150 A
APPLICATIONS
• High Current Power
Applications
27lb-in
3.0Nm
54.5lb-in
6.0Nm
10.0Nm
nsulation Material
Polyamide 66
Polyamide 66
Polyamide 66
• Large size wires
• Power Distribution Feed-
ing Applications
nstallation Instructions
Wire Stripping Length
–
–
–
• Provides solution when
ring / fork lug is needed
Screw / Stud Size
Screwdriver
M6
M8
M10
Wrench M6
Wrench M8
Wrench M10
Flat Head 1 x 5.5 mm
Flat Head 1 x 1.5 mm
Flat Head 1 x 1.5 mm
Terminal Blocks
Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std.
Grey
10
10
CBB70
CBB70LS
10
10
CBB95
CBB95LS
10
10
Nut & Bolt configuration CBB35/50
Threaded Current Bar CBB35/50LS
Cat. No.
Std. Pk.
50
Cat. No.
PPCBB
Std. Pk.
50
Cat. No.
PPCBB1
Std. Pk.
50
Accessories
Partition Plate
PPCBB
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA102
CA202
50
50
CA102
CA202
50
50
CA102
CA202
50
50
70 mm
80 mm
100 mm
130 mm
160 mm
200 mm
250 mm
Protective Cover
for installing on
PPCBB & PPCBB1
CBBPC1/70
CBBPC1/80
CTSPC2-1
CBBPC1/130
CBBPC1/160
CBBPC1/200
CBBPC1/250
10
10
10
10
10
10
10
CBBPC1/70
CBBPC1/80
CTSPC2-1
CBBPC1/130
CBBPC1/160
CBBPC1/200
CBBPC1/250
10
10
10
10
10
10
10
–
–
–
10
–
10
10
10
–
CBBPC2/100
–
CBBPC2/160
CBBPC2/200
CBBPC2/250
2 pole
3 pole
CA790/2
CA790/3
10
10
CA791/2
CA791/3
10
10
CA791/2
CA791/3
10
10
Permanent
Jumper Bars
MT16
1 Pk. (100 tags)
Marking Tag
MT12
1 Pk. (100 tags)
MT16
1 Pk. (100 tags)
58
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
CBB SERIES
RING LUG TYPE POWER TERMINAL BLOCKS
STUD / RING LUG TERMINALS
CBB185
CBB120
CBB150
CBB120LS
CBB150LS
CBB185LS
255 A Feed Through
Power Terminal
285 A Feed Through
Power Terminal
310 A Feed Through
Power Terminal
Dimensions & Weight
Width
48 mm
48 mm
48 mm
Length
100 mm
110 mm
110 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
47.3 mm
54.5 mm
47.3 mm
54.5 mm
47.3 mm
54.5 mm
Weight per piece
244.0 g
316.0 g
319.4 g
Technical Data/Ratings
Approvals
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
8-250 KCMIL 16-120 mm2
8-300 KCMIL 16-150 mm2
8-350 KCMIL 16-185 mm2
600 V
255 A
90lb-in
1000V AC/DC
269 A
600 V
285 A
1000V AC/DC
309 A
600 V
310 A
1000V AC/DC
353 A
10.0Nm
127lb-in
14.0Nm
127lb-in
14.0Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screw / Stud Size
–
–
–
M10
M12
M12
Screwdriver
Wrench M10
Wrench M12
Wrench M12
Flat Head 1 x 1.5 mm
Flat Head 1 x 1.5 mm
Flat Head 1 x 1.5 mm
Terminal Blocks
Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std.
Grey
10
10
CBB150
CBB150LS
10
10
CBB185
CBB185LS
10
10
Nut & Bolt configuration CBB120
Threaded Current Bar CBB120LS
Cat. No.
Std. Pk.
50
Cat. No.
PPCBB1
Std. Pk.
50
Cat. No.
PPCBB1
Std. Pk.
50
Accessories
Partition Plate
PPCBB1
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA102
CA202
50
50
CA102
CA202
50
50
CA102
CA202
50
50
100 mm
160 mm
200 mm
250 mm
Protective Cover
for installing on
PPCBB & PPCBB1
CBBPC2/100
CBBPC2/160
CBBPC2/200
CBBPC2/250
10
10
10
10
CBBPC2/100
CBBPC2/160
CBBPC2/200
CBBPC2/250
10
10
10
10
CBBPC2/100
CBBPC2/160
CBBPC2/200
CBBPC2/250
10
10
10
10
2 pole
3 pole
CA793/2
CA793/3
10
10
CA794/2
CA794/3
10
10
CA794/2
CA794/3
10
10
Permanent
Jumper Bars
MT16
1 Pk. (100 tags)
Marking Tag
MT16
1 Pk. (100 tags)
MT16
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-94
00 • FAX (908)806-9490
59
PTB SERIES
HIGH CURRENT POWER TERMINAL BLOCKS
STUD / RING LUG TERMINALS
PTB35/50
PTB70/95
PTB35/50SH
PTB70/95SH
HIGHLIGHTS
PTB35/50SH
PTB70/95SH
FEATURES
• Panel / DINꢀRail mountable
• High Current up to 230A
• Finger safe protective cover
PTB35/50
25 mm
PTB70/95
Dimensions & Weight
Width
(PSPTBXX)
32 mm
• Modular / stackable design
• 2, 3, 4 pole jumper system
Length
113 / 169 mm
130 / 192 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
61.0 / 66.5 mm
68.3 / 73.6 mm
76.6 / 78.0 mm
84.5 / 86.0 mm
APPLICATIONS
• High Current Power
Applications
Weight per piece
112.0 / 130.5 g
174.4 / 198.2 g
Technical Data/Ratings
• Large size wires
Approvals
• Power Distribution Feeding
Applications
• Provides solution when
ring / fork lug is needed
CB
SCHEME
E220514
60947-7-1
E220514
60947-7-1
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
8-2 AWG
1.5-50 mm2
1000V AC/DC
150 A
8-4/0 AWG
1.5-95 mm2
1000V AC/DC
232 A
600 V
115 A
27lb-in
600 V
230 A
87lb-in
3.0Nm
10.0Nm
Insulation Material
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
–
–
Screw / Stud Size
Screwdriver
M6
M8
Hex Nut Driver 10 mm
Hex Nut Driver 13 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey
PTB35/50
PTB35/50SH
10
10
PTB70/95
PTB70/95SH
10
10
Cat. No.
Std. Pk.
20
Cat. No.
Std. Pk.
10
Accessories
Protective Cover
PSPTB35
PSPTB70
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA102
CA202
50
50
CA102
CA202
50
50
2 pole
3 pole
4 pole
Jumper System
CA703/9
CA704/9
CA705/9
10
10
10
CA703/11
CA704/11
CA705/11
10
10
10
Marking Tag
MT9
1 Pk. (100 tags) MT9
MHPTB35
1 Pk. (100 tags)
Marking Tag Holder
MHPTB35
Marking Tag Holder
MHPTB35
Protective Cover
PSPTB35
60
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
ACCESSORIES
JUMPERS / SHORTING LINKS
STUD / RING LUG TERMINALS
Fork Type
Jumper
Insulated Fork Type
Jumper
Ring Lug
Jumper
Alternate Jumper
for STH4DT Series
Insulated Ring Lug
Jumper
Internal
Jumper
Terminal Block
Series
Poles
Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk.
CBS3U
2 Pole
3 Pole
4 Pole
10 Pole
2 Pole
3 Pole
4 Pole
10 Pole
CA728/2
CA728/3
CA728/4
CA728/10 10
CA772/2 100
CA772/3
CA772/4
CA772/10 10
50
50
50
CA512/15-2 100
CA512/15-3 50
CA512/15-4 50
CA514/15-2 100
CA514/15-3 50
CA514/15-4 50
CA512/17-2 100
CA512/17-3 50
CA512/17-4 50
CA514/17-2 100
CA514/17-3 50
CA514/17-4 50
CSB3/N3U
CSB3/N3UL
STH3
CBS4U
CBS5U
CSB4/N4UL
CSB5/N5U
CSTSN4U
CSTSN5U
CSTSN6U
CSTSB4U
CSTSB5U
N/A
N/A
CA512/2-2 100
CA514/2-2 100
CA512/4-2 100
CA514/4-2 100
50
50
CA512/2-3
CA512/2-4
50
50
CA514/2-3
CA514/2-4
50
50
CA512/4-3
CA512/4-4
50
50
CA514/4-3
CA514/4-4
50
50
2 Pole
3 Pole
4 Pole
CA512/1-2 100
CA514/1-2 100
CA512/3-2 100
CA514/3-2 100
N/A
N/A
N/A
CA512/1-3
CA512/1-4
50
50
CA514/1-3
CA514/1-4
50
50
CA512/3-3
CA512/3-4
50
50
CA514/3-3
CA514/3-4
50
50
2 Pole
3 Pole
4 Pole
2 Pole
3 Pole
4 Pole
2 Pole
3 Pole
4 Pole
CA512/7-2 100
CA514/7-2 100
CA512/8-2 100
CA514/8-2 100
CSTSN6U
N/A
CA512/7-3
CA512/7-4
50
50
CA514/7-3
CA514/7-4
50
50
CA512/8-3
CA512/8-4
50
50
CA514/8-3
CA514/8-4
50
50
STH4
STH4DT
STH4DTFT
CA512/13-2 100
CA512/13-3 50
CA512/13-4 50
CA514/13-2 100
CA514/13-3 50
CA514/13-4 50
CA512/14-2 100
CA512/14-3 50
CA512/14-4 50
CA514/14-2 100
CA514/14-3 50
CA514/14-4 50
CA514/14-3A 10
CA514/14-4A 10
N/A
CA774/2 100
CA774/3
CA774/4
STH6
50
50
N/A
N/A
N/A
N/A
END STOPS
CA802
CA707
CA202
Cat. No
CA802
Dimensions
32 x 45 x 8 mm
Std. Pk.
50
Cat. No
CA702
Dimensions
34 x 45 x 9 mm
Std. Pk.
50
Cat. No
CA202
Dimensions
44.5 x 50 x 9.5 mm
Std. Pk.
50
ENDPLATES / PROTECTIVE COVERS
For CBS, CSB, CSTS Series
Terminal Block
CBS Series
CSB Series
CSTSN Series
CSTSB Series
STH3
STH4
STH6
STH4DT
Cat. No
Dimensions
Std. Pk.
Length
100mm
200mm
300mm
Cat. No.
Std. Pk.
10
10
CSTSPC1-2
CSTSPC1-3
CSTSPC1-4
EPCBS3U 26.2 x 49 x 1.5 mm
50
10
EPCSTSU 31 x 50 x 1.5 mm
50
50
50
50
50
EPSTH3
EPSTH4
EPSTH6
34 x 47 x 1.5 mm
39.5 x 46 x 1.5 mm
51 x 63.5 x 1.5 mm
EPSTH4DT 37.5 x 86 x 1.5 mm
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
61
OVERVIEW
INTRODUCTION
SPRING TERMINAL BLOCKS
SPRING CLAMP TECHNOLOGY
• Easy Installation
• NO torque requirements
• Maintenance free
• Terminals accept wires with/ without ferrules
• Versatile and Vibration Proof
• Reliable Gas-tight connection
• Fail proof, safe connection
E220514
60947-7-1
MATERIAL SPECIFICATIONS
Polyamide 66 Specifications
Upper Temperature Limit: 105°C
Lower Temperature Limit: -50°C
Current Carrying Metal
Corrosion free material
Terminal Block Housing
• Polyamide PA66 Housing
• Self-extinguishing
using
ing
• Spring: Stainless Steel
• Current Bar: copper tin
plated
rent Bar
Flammability UL94:
Volume Resistivity:
Surface Resistivity:
V2/ V0
• High mechanical strength
1012 Ω cm
1010 Ω
INSTALLATION GUIDELINES
1
2
3
1 Insert Flat-Head Screw Driver into insertion
Secure
Connection
a
WATCH
VIDEO
space to open pre-loaded spring
2 (a) Insert Wire into opening in spring leg.
(b) Remove screwdriver.
3 The spring force presses conductor against
the current bar for a reliable/safe connection
CX SERIES FEATURES AND ADVANTAGES
COMPACT DESIGN
CX4 - MOST COMPACT
Knife Disconnect
use
rminal
IN THE INDUSTRY
Push-In Jumper
Technology
Large Center
Marking Area
Partition Plate
for Separation
Unique Design
for easy wire entry
Side y
Terminals
62
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-94
00 • FAX (908)806-9490
OVERVIEW
SELECTION GUIDE
SPRING TERMINAL BLOCKS
CX Series
FEATURES
• Extremely Compact Design
• CX4 is the most compact in the industry
• Push-In technology jumper system
• 2, 3, 4 5, 6, 7, 8, 10 pole
Feed-Though
Multi-Connection
Ground/Earth
• 2 independent jumper channels
• Easy breakout of jumper pins for alternate
shorting of terminal blocks
page 64-65
page 66-67
page 68-70
• Felt tip pen marking option
• Center marking tag area
• Unique design in plastic housing for easy
wire entry
• Individually mountable partition plates
provide electrical and visual separation
• Test Plugs for Test & Measurement needs
Double Level
Electronic Component
Fuse
page 71
page 72
page 74
Component Carrier
Disconnect
Side Entry
page 75
page 76
page 77
Pluggable
Hybrid Distribution
page 78
page 79
Angular Series
FEATURES
• 45 wire entry for easy installation
• 2.5mm to 8mm terminal blocks (up to 50A)
• Multi-Connection Terminals
• 2, 3, 4 connection ground terminals
Feed-Through Multi-Connection
Multi-Level
Ground/Earth
page 80
page 81
page 82-83 page 84-85
Accessories
Jumpers
End Plates, Partitions,
End Stops, Test Plugs
page 86
page 87
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
63
CX SERIES
FEED THROUGH TERMINAL BLOCKS
SPRING TERMINAL BLOCKS
CX2.5
CX4
CX6
HIGHLIGHTS
FEATURES
• Most compact in Industry
• 2, 3, 4, 10 Pole Push-In
Jumpers
• 2 Jumper Channels for
2 Connection Feed-Through
2 Jumper Channels
2 Connection Feed-Through
2 Jumper Channels
2 Connection Feed-Through
2 Jumper Channels
multiple Jumper options
imensions
• 3 and 4 Connection
Terminals
Width
5 mm
6 mm
8 mm
• 3 Marking Locations
• Many Colors
Length
49.7 mm
54.8 mm
62.1 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
38.0 mm
45.5 mm
38.0 mm
45.5 mm
43.0 mm
50.5 mm
APPLICATIONS
Weight per piece
6.2 g
9.8 g
14.0 g
• High Vibration
Environments
echnical Data/Ratings
• Machines
• Elevator Cabinets
• Transport
Approvals
E220514
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
24 A
60947-7-1
0.2-4 mm2
1000V AC/DC
32 A
E220514
60947-7-1
0.2-6 mm2
1000V AC/DC
41 A
Wire Size (solid / stranded)
Voltage Rating
24-12 AWG
600 V
24-10 AWG
600 V
24-8 AWG
600 V
Current Rating
20 A
30 A
50 A
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
10 mm
10 mm
14 mm
Flat Head 0.5 x 3 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.8 x 4 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CX2.5
100
100
100
100
100
100
100
100
CX4
100
100
100
100
100
100
100
100
CX6
100
100
100
100
100
100
100
100
Red
R
CX2.5/R
CX2.5/BU
CX2.5/BL
CX2.5/O
CX2.5/G
CX2.5/Y
CX2.5/W
CX4/R
CX4/BU
CX4/BL
CX4/O
CX4/G
CX4/Y
CX4/W
CX6/R
CX6/BU
CX6/BL
CX6/O
CX6/G
CX6/Y
CX6/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Accessories
End Plate
Cat. No.
EPCX2.5
Std. Pk.
50
Cat. No.
EPCX4
Std. Pk.
50
Cat. No.
EPCX6
Std. Pk.
50
Partition Plate
DIN Rail
PPCX4
20
PPCX4
20
PPCX10
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX4/2
JX4/3
JX4/4
–
–
–
JX4/8
JX4/10
JX4/16
100
50
50
–
–
–
50
10
10
JX6/2
JX6/3
JX6/4
–
–
–
–
100
50
50
–
–
–
–
10
–
JX6/10
–
Test Plug
TX2.5
50
TX4
50
TX6
50
Marking Tag
Warning Label
MT5
WLX2.5
1 Pk. (100 tags) MT6
1 Pk. (100 tags) WLX4
1 Pk. (100 tags) MT8
1 Pk. (100 tags) WLX6
1 Pk. (100 tags)
1 Pk. (100 tags)
64
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
CX SERIES
FEED-THROUGH/MULTI-CONNECTION TERMINAL BLOCKS
SPRING TERMINAL BLOCKS
CX10
CSC16T
CX2.5/3
CX2.5/4
2 Connection Feed-Through
2 Jump Channels
2 Connection Feed-Through
2 Jump Channels
3 Connection Feed-Through
2 Jump Channels
4 Connection Feed-Through
2 Jumper Channels
Dimensions
10 mm
12 mm
5 mm
5 mm
Width
71.7 mm
82.0 mm
62.2 mm
74.7 mm
Length
49.5 mm
57.0 mm
51.6 mm
59.0 mm
38.0 mm
45.5 mm
38.0 mm
45.5 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
Weight per piece
22.4 g
39 g
7.6 g
9.4 g
Technical Data/Ratings
Approvals
E220514
60947-7-1
0.2-10 mm2
1000V AC/DC
57 A
E220514
60947-7-1
1.5-16 mm2
800V AC/DC
76 A
E220514
60947-7-1
0.2-2.5 mm2
1000 V AC/DC
24 A
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
24 A
24-6 AWG
600 V
16-4 AWG
24-12 AWG
600 V
24-12 AWG
Wire Size (solid | stranded)
Voltage Rating
600 V
85 A
600 V
20 A
65 A
20 A
Current Rating
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Insulation Material
Installation Instructions
Wire Stripping Length
Screwdriver
18 mm
20 mm
10 mm
10 mm
Flat Head 0.8 x 4 mm
Flat Head 1.0 x 5.5 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
CX2.5/3
100
100
100
100
100
100
100
100
CX2.5/4
50
50
50
50
50
50
50
50
Grey (standard)
CX10
50
50
50
50
50
50
50
50
CSC16T
50
50
50
50
50
50
50
50
CX2.5/3/R
CX2.5/3/BU
CX2.53/BL
CX2.5/3/O
CX2.5/3/G
CX2.5/3/Y
CX2.53/W
CX2.5/4/R
CX2.5/4/BU
CX2.5/4/BL
CX2.5/4/O
CX2.5/4/G
CX2.5/4/Y
CX2.5/4/W
Red
R
CX10/R
CX10/BU
CX10/BL
CX10/O
CX10/G
CX10/Y
CX10/W
CSC16T/R
CSC16T/BU
CSC16T/BL
CSC16T/O
CSC16T/G
CSC16T/Y
CSC16T/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Accessories
Cat. No.
EPCX10
Std. Pk.
20
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
20
EPCSC16T
EPCX2.5/3
EPCX2.5/4
End Plate
PPCX10
20
–
–
PPCX4/3
20
PPCX4/4
20
Partition Plate
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
End Stop
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX10/2
20
–
–
–
–
–
–
–
–
CA801/5
100
–
–
–
–
–
–
–
–
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
TX10
50
–
–
TX2.5
50
TX2.5
50
Test Plug
MT10
WLX10
1 Pk. (100 tags)
100
–
–
MT5
WLX2.5
1 Pk. (100 tags) MT5
100 WLX2.5
1 Pk. (100 tags)
100
Marking Tag
Warning Label
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
65
CX SERIES
MULTIPLE CONNECTION TERMINAL BLOCKS
SPRING TERMINAL BLOCKS
CX4/4
CX6/3
CX10/3
CX4/3
3 Connection Feed-Through
2 Jumper Channels
4 Connection Feed-Through
2 Jumper Channels
3 Connection Feed-Through
2 Jumper Channels
4 Connection Feed-Through
2 Jumper Channels
Dimensions
Width
6 mm
6 mm
8 mm
10 mm
Length
70.5 mm
86.2 mm
82.2 mm
97.0 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
38.0 mm
45.5 mm
38.0 mm
45.5 mm
43.0 mm
50.5 mm
49.5 mm
57.0 mm
Weight per piece
10.8 g
13.6 g
19.8 g
35.0 g
Technical Data/Ratings
Approvals
UL
IEC
E220514
60947-7-1
0.2-4 mm2
1000V AC/DC
32 A
E220514
60947-7-1
0.2-4.0 mm2
1000V AC/DC
32 A
E220514
60947-7-1
0.2-6 mm2
1000V AC/DC
41 A
Wire Size (solid | stranded)
Voltage Rating
24-10 AWG
600 V
24-10 AWG
600 V
24-8 AWG
600 V
24-6 AWG
600 V
0.2-10 mm2
1000V AC/DC
57 A
Current Rating
30 A
30 A
50 A
65 A
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
10 mm
10 mm
14 mm
18 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.8 x 4 mm
Flat Head 0.8 x 4 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CX4/3
50
50
50
50
50
50
50
50
CX4/4
50
50
50
50
50
50
50
50
CX6/3
50
50
50
50
50
50
50
50
CX10/3
50
50
50
50
50
50
50
50
Red
R
CX4/3/R
CX4/3/BU
CX4/3/BL
CX4/3/O
CX4/3/G
CX4/3/Y
CX4/3/W
CX4/4/R
CX4/4/BU
CX4/4BL
CX4/4/O
CX4/4/G
CX4/4/Y
CX4/4/W
CX6/3/R
CX6/3/BU
CX6/3/BL
CX6/3/O
CX6/3/G
CX6/3/Y
CX6/3/W
CX10/3/R
CX10/3/BU
CX10/3BL
CX10/3/O
CX10/3/G
CX10/3/Y
CX10/3/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Accessories
Cat. No.
EPCX4/3
Std. Pk.
20
Cat. No.
EPCX4/4
Std. Pk.
20
Cat. No.
EPCX6/3
Std. Pk.
20
Cat. No.
Std. Pk.
20
End Plate
EPCX10/3
Partition Plate
DIN Rail
PPCX4/3
20
PPCX4/4
20
–
–
–
–
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX4/2
JX4/3
JX4/4
–
–
–
JX4/8
JX4/10
JX4/16
100
50
50
–
–
–
50
10
10
JX4/2
JX4/3
JX4/4
–
–
–
JX4/8
JX4/10
JX4/16
100
50
50
–
–
–
50
10
10
JX6/2
JX6/3
JX6/4
–
–
–
–
100
50
50
–
–
–
–
10
–
JX10/2
20
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
JX6/10
–
Test Plug
TX4
50
TX4
50
TX6
50
TX10
50
Marking Tag
Warning Label
MT6
WLX4
1 Pk. (100 tags) MT6
1 Pk. (100 tags) WLX4
1 Pk. (100 tags) MT8
1 Pk. (100 tags) WLX6
1 Pk. (100 tags) MT10
1 Pk. (100 tags) WLX10
1 Pk. (100 tags)
1 Pk. (100 tags)
66
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
CX SERIES
MULTIPLE CONNECTION TERMINAL BLOCKS
SPRING TERMINAL BLOCKS
CX2.5/4P
CX2.5/4(E)D1
Double potential Terminal Block. 2
different voltage potentials.
2 Jumper Channels on one side
4 connection spring Terminal Block.
With built in Diode (1N4007) for
reverse polarity protection to allow
current only to flow in one direction
Dimensions
Width
5 mm
5 mm
Length
74.7 mm
74.7 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
38.0 mm
45.5 mm
38.0 mm
45.5 mm
Weight per piece
9.6 g
9.4 g
Technical Data/Ratings
Approvals
E220514
24-12 AWG
600 V
60947-7-1
0.2-2.5 mm2
1000V AC/DC
-
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
-
Wire Size (solid | stranded)
Voltage Rating
24-12 AWG
600 V
-
Current Rating
-
Insulation Material
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
10 mm
10 mm
Flat Head 0.5 x 3 mm
Flat Head 0.6 x 3 mm
Terminal Blocks
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Grey (standard)
CX2.5/4P
CX2.5/4(E)D1
Accessories
Cat. No.
Std. Pk.
20
Cat. No.
Std. Pk.
20
End Plate
EPCX2.5/4
EPCX2.5/4
Partition Plate
DIN Rail
PPCX4/4
20
PPCX4/4
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
Test Plug
TX2.5
50
TX2.5
50
Marking Tag
Warning Label
MT5
WLX2.5
100
100
MT5
WLX2.5
100
100
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
67
CX SERIES
GROUND / EARTH TERMINAL BLOCKS
SPRING TERMINAL BLOCKS
CXG2.5
CXG4
CXG6
HIGHLIGHTS
FEATURES
• 2, 3, 4 Connection Ground
Terminals
• Yellow / Green Color as
per Industry Standard
• Snap-On feet
2 Connection Ground Terminal
2 Jumper Channels
2 Connection Ground Terminal
2 Jumper Channels
2 Connection Ground Terminal
2 Jumper Channels
• 3 Marking Locations
imensions
Width
5 mm
6 mm
8 mm
APPLICATIONS
• Grounding Applications
Length
49.7 mm
54.8 mm
62.1 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
38.0 mm
45.5 mm
38.0 mm
45.5 mm
43.0 mm
50.5 mm
Weight per piece
8.4 g
11.0 g
20.2 g
Technical Data/Ratings
Approvals
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
–
E220514
60947-7-1
0.2-4 mm2
1000V AC/DC
–
E220514
60947-7-1
0.2-6 mm2
1000V AC/DC
–
Wire Size (solid | stranded)
Voltage Rating
24-12 AWG
24-10 AWG
24-8 AWG
600 V
–
600 V
–
600 V
–
Current Rating
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
10 mm
10 mm
14 mm
Flat Head 0.5 x 3 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.8 x 4 mm
Terminal Blocks
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
100
Yellow / Green
CXG2.5
CXG4
CXG6
Accessories
Cat. No.
EPCX2.5
Std. Pk.
50
Cat. No.
EPCX4
Std. Pk.
50
Cat. No.
EPCX6
Std. Pk.
50
End Plate
Partition Plate
DIN Rail
PPCX4
20
PPCX4
20
PPCX10
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX4/2
JX4/3
JX4/4
–
–
–
JX4/8
JX4/10
JX4/16
100
50
50
–
–
–
50
10
10
JX6/2
JX6/3
JX6/4
–
–
–
–
100
50
50
–
–
–
–
10
–
JX6/10
–
Test Plug
TX2.5
50
TX4
50
TX6
50
Marking Tag
Warning Label
MT5
WLX2.5
100
50
MT6
WLX4
100
100
MT8
WLX6
100
100
68
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
CX SERIES
MULTIPLECONNECTIONGROUND/EARTHTERMINALBLOCKS
SPRING TERMINAL BLOCKS
CXG10
CXG2.5/3
CXG2.5/4
CXG4/3
2 Connection Ground Terminal
2 Jumper Channels
3 Connection Ground Terminal
2 Jumper Channels
4 Connection Ground Terminal
2 Jumper Channels
3 Connection Ground Terminal
2 Jumper Channels
Dimensions
Width
10 mm
5 mm
5 mm
6 mm
Length
62.1 mm
62.2 mm
74.7 mm
70.5 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
43.0 mm
50.5 mm
38.0 mm
45.5 mm
38.0 mm
45.5 mm
38.0 mm
45.5 mm
Weight per piece
29.4 g
10.2 g
12.4 g
14.0 g
Technical Data/Ratings
Approvals
E220514
60947-7-1
0.2-10 mm2
1000V AC/DC
–
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
–
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
–
E220514
60947-7-1
0.2-4 mm2
1000V AC/DC
–
Wire Size (solid | stranded)
Voltage Rating
24-6 AWG
24-12 AWG
24-12 AWG
24-10 AWG
600 V
–
600 V
–
600 V
–
600 V
–
Current Rating
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
18 mm
10 mm
10 mm
10 mm
Flat Head 0.8 x 4 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Yellow / Green
CXG10
CXG2.5/3
CXG2.5/4
CXG4/3
Cat. No.
EPCX10
Std. Pk.
20
Accessories
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
20
Cat. No.
EPCX4/3
Std. Pk.
20
End Plate
EPCX2.5/3
EPCX2.5/4
PPCX10
20
Partition Plate
DIN Rail
PPCX4/3
20
PPCX4/4
20
PPCX4/3
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
10
2511120
CA701-15/S
20
10
2511120
CA701-15/S
20
10
CA702
CA802
CA103
50
50
50
End Stop
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX10/2
20
–
–
–
–
–
–
–
–
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX4/2
JX4/3
JX4/4
–
–
–
JX4/8
JX4/10
JX4/16
100
50
50
–
–
–
50
10
10
JX6/2
JX6/3
JX6/4
–
–
–
–
100
50
50
–
–
–
–
10
–
–
–
–
–
–
–
–
–
JX6/10
–
Test Plug
TX10
50
TX2.5
50
TX2.5
50
TX4
50
Marking Tag
Warning Label
MT10
WLX10
100
100
MT5
WLX2.5
100
100
MT5
WLX2.5
100
100
MT6
WLX4
100
100
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
69
CX SERIES
MULTIPLECONNECTIONGROUND/EARTHTERMINALBLOCKS
SPRING TERMINAL BLOCKS
CXG4/4
CXG6/3
CXG10/3
4 Connection Ground Terminal
2 Jumper Channels
3 Connection Ground Terminal
2 Jumper Channels
3 Connection Ground Terminal
2 Jumper Channels
Dimensions
Width
6 mm
8 mm
10 mm
Length
86.2 mm
82.2 mm
82.2 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
38.0 mm
45.5 mm
43.0 mm
50.5 mm
43.0 mm
50.5 mm
Weight per piece
17.2 g
26.0 g
35.0 g
Technical Data/Ratings
Approvals
UL
E220514
60947-7-1
0.2-4 mm2
1000V AC/DC
–
E220514
60947-7-1
0.2-6 mm2
1000V AC/DC
–
60947-7-1
Wire Size (solid | stranded)
Voltage Rating
24-10 AWG
24-8 AWG
24-6 AWG
600 V
–
0.2-10 mm2
1000V AC/DC
–
600 V
–
600 V
–
Current Rating
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
10 mm
10 mm
18 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.8 x 4 mm
Flat Head 0.8 x 4 mm
Terminal Blocks
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Yellow / Green
CXG4/4
CXG6/3
CXG10/3
Accessories
Cat. No.
EPCX4/4
Std. Pk.
20
Cat. No.
EPCX6/3
Std. Pk.
20
Cat. No.
Std. Pk.
20
End Plate
EPCX10/3
Partition Plate
DIN Rail
PPCX4/4
20
–
–
–
–
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX4/2
JX4/3
JX4/4
–
–
–
JX4/8
JX4/10
JX4/16
100
50
50
–
–
–
50
10
10
JX6/2
JX6/3
JX6/4
–
–
–
–
100
50
50
–
–
–
–
10
–
JX10/2
20
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
JX6/10
–
Test Plug
TX4
50
TX6
50
TX10
50
Marking Tag
Warning Label
MT6
WLX4
100
100
MT8
WLX6
100
100
MT10
WLX10
100
100
70
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
CX SERIES
DOUBLE LEVEL TERMINAL BLOCKS
SPRING TERMINAL BLOCKS
CXDL2.5
CXDL2.5(I.S)
CXDLG2.5
CXDLG2.5(I.S)
Double Level Terminal
Jumpers / Marking on both levels
Double Level Terminal Internally
Shorted
Top Level Feed-Through
Bottom Level Grounding Circuit
4 Connection Ground Terminal
Dimensions
Width
5 mm
5 mm
5 mm
5 mm
Length
71 mm
71 mm
71 mm
71 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
49.5 mm
57 mm
49.5 mm
57 mm
49.5 mm
57 mm
49.5 mm
57 mm
Weight per piece
10.4 g
11.0 g
13.2 g
13.8 g
Technical Data/Ratings
Approvals
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
24 A
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
24 A
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
24 A (Top Level)
E220514
24-12 AWG
600 V
60947-7-1
0.2-2.5 mm2
1000V AC/DC
-
Wire Size (solid | stranded)
Voltage Rating
24-12 AWG
24-12 AWG
600 V
24-12 AWG
600 V
600 V
20 A
20 A (Top Level)
Current Rating
20 A
-
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
10 mm
10 mm
10 mm
10 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Grey (standard)
CXDL2.5
50
50
50
50
50
50
50
50
CXDL2.5(I.S)
50
50
50
50
50
50
50
50
CXDLG2.5
Yellow / Green
CXDLG2.5(I.S)
Yellow / Green
Red
R
CXDL2.5/R
CXDL2.5/BU
CXDL2.5BL
CXDL2.5/O
CXDL2.5/G
CXDL2.5/Y
CXDL2.5/W
CXDL2.5(I.S)/R
CXDL2.5(I.S)/BU
CXDL2.5(I.S)/BL
CXDL2.5(I.S)/O
CXDL2.5(I.S)/G
CXDL2.5(I.S)/Y
CXDL2.5(I.S)/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Accessories
End Plate
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
EPCXDL2.5
EPCXDL2.5
EPCXDL2.5
EPCXDL2.5
Partition Plate
DIN Rail
–
–
–
–
–
–
–
–
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
Test Plug
TX2.5
50
TX2.5
50
TX2.5
50
TX2.5
50
Marking Tag
Warning Label
MT5
WLX2.5
100
100
MT5
WLX2.5
100
100
MT5
WLX2.5
100
100
MT5
WLX2.5
100
100
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
71
CX SERIES
TERMINAL BLOCKS WITH ELECTRONIC COMPONENTS
SPRING TERMINAL BLOCKS
CXDL2.5(E)D1
CXDL2.5(E)D2
CXDL2.5(E)D3
HIGHLIGHTS
FEATURES
• Various configurations of
Electronic Components
soldered into CXDL2.5
double level Terminal Block
• Various Diode/ Resistor
combinations
• Various Indicator options
• 4 Connection points for
convenient wiring
Arc Suppression Circuit Diode
Arc Suppression Circuit Diode
Reverse Polarity Protection
Diode
Dimensions
APPLICATIONS
Width
5 mm
5 mm
5 mm
• Reverse polarity protection
Length
72.7 mm
72.7 mm
72.7 mm
• Lamp Testing
• AC/ DC voltage Indication
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
49.5 mm
57.0 mm
49.5 mm
57.0 mm
49.5 mm
57.0 mm
Weight per piece
10.6 g
10.6 g
10.6 g
Technical Data/Ratings
Approvals
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
-
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
-
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
24 A (Top Level)
Wire Size (solid | stranded)
Voltage Rating
24-12 AWG
24-12 AWG
24-12 AWG
600 V
-
600 V
-
600 V
20 A (Top Level)
Current Rating
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Electronic Component Specifications
Diode Type
1N 4007
1N 4007
1000 V / 1 A
-
1N 4007
1000 V / 1 A
-
Diode Reverse Voltage / Current
Indicator Voltage
1000 V / 1 A
-
Installation Instructions
Wire Stripping Length
Screwdriver
10 mm
10 mm
10 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Terminal Blocks
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Grey (standard)
CXDL2.5(E)D1
CXDL2.5(E)D2
CXDL2.5(E)D3
Accessories
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
End Plate
EPCXDL2.5
EPCXDL2.5
EPCXDL2.5
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
Marking Tag
MT5
100
MT5
100
MT5
100
72
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
CX SERIES
TERMINAL BLOCKS WITH ELECTRONIC COMPONENTS
SPRING TERMINAL BLOCKS
CXDL2.5(E)DD1/DD2 CXDL2.5(E)DD3/DD4 CXDL2.5(E)LD1
CXDL2.5(E)TS1
DD1
DD3
Diode Circuit for lamp testing
DD2
Diode Circuit for lamp testing
DD4
Voltage Indicator
PT100 Temperature Sensor
Dimensions
Width
5 mm
5 mm
5 mm
5 mm
Length
72.7 mm
72.7 mm
72.7 mm
72.7 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
49.5 mm
57.0 mm
49.5 mm
57.0 mm
49.5 mm
57.0 mm
49.5 mm
57.0 mm
Weight per piece
10.6 g
10.6 g
10.6 g
12.2 g
Technical Data/Ratings
Approvals
UL
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
-
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
-
E220514
60947-7-1
60947-7-1
Wire Size (solid | stranded)
Voltage Rating
24-12 AWG
24-12 AWG
24-12 AWG
0.2-2.5 mm2
1000V AC/DC
-
24-12 AWG
0.2-2.5 mm2
1000V AC/DC
-
600 V
-
600 V
-
600 V
-
600 V
-
Current Rating
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Electronic Component Specifications
Diode Type
1N 4007
1N 4007
1000 V / 1 A
-
1N 4007
1000 V / 1 A
1N 4007
1000 V / 1 A
-
Diode Reverse Voltage / Current
Indicator Voltage
1000 V / 1 A
-
6-60V / 110-240V
Installation Instructions
Wire Stripping Length
Screwdriver
10 mm
10 mm
10 mm
10 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
CXDL2.5(E)LD1/6-60V
CXDL2.5(E)LD1/110-240V 50
Std. Pk. Cat. No.
Std. Pk.
50
Grey (standard)
CXDL2.5(E)DD1
CXDL2.5(E)DD2
50
50
CXDL2.5(E)DD3
CXDL2.5(E)DD4
50
50
50
CXDL2.5(E)TS1
Accessories
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
End Plate
EPCXDL2.5
EPCXDL2.5
EPCXDL2.5
EPCXDL2.5
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
Marking Tag
MT5
100
MT5
100
MT5
100
MT5
100
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
73
CX SERIES
FUSE TERMINAL BLOCKS 5 x 20 mm
SPRING TERMINAL BLOCKS
CXF4
CXF4(L)6-60V
CXF4(L)110-240V
HIGHLIGHTS
FEATURES
• CXF4 Series accepts
5x20mm / 5x25mm fuse
types
27KΩ
220KΩ
• Completely enclosed, no
endplates
Dimensions
• Version with LED for blown
fuse indication
• AC and DC compatible
• Large marking area
• No polarity required
Width
6 mm
6 mm
6 mm
Length
65.4 mm
65.4 mm
65.4 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
61.3 mm
68.8 mm
61.3 mm
68.8 mm
61.3 mm
68.8 mm
Weight per piece
16 g
16 g
16 g
APPLICATIONS
• Control systems with fuse
protection
Technical Data/Ratings
Approvals
CB
SCHEME
E220514
60947-7-1
E220514
60947-7-1
E220514
60947-7-1
0.2-4 mm2
1000V AC/DC
10 A
Wire Size (solid | stranded)
Voltage Rating
24-10 AWG
0.2-4 mm2
1000V AC/DC
10 A
24-10 AWG
600 V
0.2-4 mm2
1000V AC/DC
10 A
24-10 AWG
600 V
10 A
600 V
10 A
Current Rating
10 A
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Fuse Specifications
Fuse Type
5x20 mm
5x20 mm
5x20 mm
LED Indicator Voltage
–
–
6-60V AC/DC
110-240V AC/DC
Installation Instructions
Wire Stripping Length
Screwdriver
10 mm
10 mm
10 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
CXF(L)110-240V
CXF4(L)110-240V/BU 50
CXF4(L)110-240V/BL 50
Std. Pk.
50
Grey (standard)
CXF4
CXF4/BU
CXF4/BL
50
50
50
CXF4(L)6-60V
CXF4(L)6-60V/BU
CXF4(L)6-60V/BL
50
50
50
Blue
BU
Black
BL
Accessories
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
DIN Rail
2511120
CA701-15/S
20
10
2511120
CA701-15/S
20
10
2511120
CA701-15/S
20
10
2 pole
3 pole
4 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX4/2
JX4/3
JX4/4
JX4/8
JX4/10
JX4/16
100
50
50
50
10
10
JX4/2
JX4/3
JX4/4
JX4/8
JX4/10
JX4/16
100
50
50
50
10
10
JX4/2
JX4/3
JX4/4
JX4/8
JX4/10
JX4/16
100
50
50
50
10
10
Test Plug
TX4
50
TX4
50
TX4
50
Marking Tag
Warning Label
MT6
WLX4
100
100
MT6
WLX4
100
100
MT6
WLX4
100
100
Ø5mm
(0.2 in.)
Fuses
5 x 20 mm
Current
Slow Blow
Cat. No
Fast Blow
Current
Rating
Slow Blow
Cat. No
Fast Blow
Cat. No
Rating
0.1A
0.2A
0.5A
1.0A
2.0A
Cat. No
0.1M5x20T
0.2M5x20T
0.5M5x20T
1.0M5x20T
2.0M5x20T
0.1M5x20F
0.2M5x20F
0.5M5x20F
1.0M5x20F
2.0M5x20F
4.0A
5.0A
6.3A
8.0A
10.0A
4.0M5x20T
5.0M5x20T
6.3M5x20T
8.0M5x20T
10.0M5x20T
4.0M5x20F
5.0M5x20F
6.3M5x20F
8.0M5x20F
10.0M5x20F
74
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
CX SERIES
COMPONENT CARRIER TERMINAL BLOCKS
SPRING TERMINAL BLOCKS
CXCC4
CPD1
CPF
CPF(L)
27KΩ
Dimensions
Width
6 mm
6 mm
6 mm
6 mm
Length
65.4 mm
28 mm
28 mm
28 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
61.3 mm
68.8 mm
Weight per piece
Technical Data/Ratings
Approvals
10.2 g
3.8 g
3.8 g
4.2 g
CB
SCHEME
E220514
60947-7-1
E220514
60947-7-1
E220514
60947-7-1
E220514
60947-7-1
Wire Size (solid | stranded)
Voltage Rating
24-10 AWG
0.2-4 mm2
1000V AC/DC
*
24-10 AWG
0.2-4 mm2
24-10 AWG
0.2-4 mm2
24-10 AWG
0.2-4 mm2
1000V AC/DC
10 A
600 V
*
600 V
1 A
1000V AC/DC
1 A
600 V
10 A
1000V AC/DC
10 A
600 V
10 A
Current Rating
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Carrier Specifications
Component Type
Component carrier base
Plug module with diode
Diode Type IN4007
Plug module for 5x20 mm fuse Plug module for 5x20 mm fuse
with LED indicator
LED Indicator Voltage
–
–
–
6-60V AC/DC
110-240V AC/DC
Installation Instructions
Wire Stripping Length
Screwdriver
10 mm
–
–
–
–
–
–
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
Grey (standard)
CXCC4
CPD1
CPF
CPF(L)6-60V
CPF(L)110-240V
50
50
Accessories
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
DIN Rail
2511120
CA701-15/S
20
10
–
–
–
–
–
–
–
–
–
–
–
–
End Stop
CA702
CA802
CA103
50
50
50
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2 pole
3 pole
4 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX4/2
JX4/3
JX4/4
JX4/8
JX4/10
JX4/16
100
50
50
50
10
10
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Test Plug
TX4
50
–
–
–
–
–
–
Marking Tag
Warning Label
MT6
SWL4
100
50
MT6
–
100
–
MT6
–
100
–
MT6
–
100
–
* Current rating is based on plug used.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
75
CX SERIES
DISCONNECT & TEST TERMINAL BLOCKS
SPRING TERMINAL BLOCKS
CXK2.5
CXK2.5/4
CXK4
2 Connection Disconnect
2 Jumper Channels
4 Connection Disconnect
2 Jumper Channels
2 Connection Disconnect
2 Jumper Channels
Dimensions
Width
5 mm
5 mm
6 mm
Length
62.2 mm
74.7 mm
70.5 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
38 mm
45.5 mm
38 mm
45.5 mm
38 mm
45.5 mm
Weight per piece
Technical Data/Ratings
Approvals
8.65 g
11.9 g
11.2 g
CB
SCHEME
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
20A
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
20A
E220514
60947-7-1
0.2-2.5 mm2
1000V AC/DC
22A
Wire Size (solid | stranded)
Voltage Rating
24-12 AWG
600 V
24-12 AWG
600 V
24-12 AWG
600 V
Current Rating
16A
16A
22A
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
10 mm
10 mm
10 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CXK2.5
50
50
50
50
50
50
50
50
CXK2.5/4
50
50
50
50
50
50
50
50
CXK4
50
50
50
50
50
50
50
50
Red
R
CXK2.5/R
CXK2.5/BU
CXK2.5/BL
CXK2.5/O
CXK2.5/G
CXK2.5/Y
CXK2.5/W
CXK2.5/4/R
CXK2.5/4/BU
CXK2.5/4/BL
CXK2.5/4/O
CXK2.5/4/G
CXK2.5/4/Y
CXK2.5/4/W
CXK4/R
CXK4/BU
CXK4/BL
CXK4/O
CXK4/G
CXK4/Y
CXK4/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Accessories
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
–
Std. Pk.
–
End Plate
EPCX2.5/3
EPCX2.5/4
Partition Plate
DIN Rail
PPCX4/3
20
PPCX4/4
20
PPCX4/3
20
2511120
CA701-15/S
20
10
2511120
CA701-15/S
20
10
2511120
CA701-15/S
20
10
End Stop
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX4/2
JX4/3
JX4/4
–
–
–
JX4/8
JX4/10
JX4/16
100
50
50
–
–
–
10
10
10
Test Plug
TX2.5
50
TX2.5
50
TX4
50
Marking Tag
Warning Label
MT5
WLX2.5
100
100
MT5
WLX2.5
100
100
MT6
WLX4
100
100
76
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
CX SERIES
SIDE ENTRY FEED THROUGH TERMINAL BLOCKS
SPRING TERMINAL BLOCKS
CXSG2.5, CXSG4
CXS2.5
CXS4
HIGHLIGHTS
FEATURES
• Side Entry Spring
Terminals
• Compact Design
• Same Jumpers as
5 mm Side Entry
Feed Through
6 mm Side Entry
Feed Through
5 / 6 mm Side Entry
Ground Terminal
regular CX Series
Dimensions
• 5mm and 6mm Feed
Through Terminal
Width
5 mm
6 mm
5 / 6 mm
• 2 Connection Ground
Blocks
Length
43 mm
43 mm
43 mm
• Low Height requirements
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
43.5 mm
51 mm
43.5 mm
51 mm
43.5 mm
51 mm
APPLICATIONS
Weight per piece
5.4 g
g
8.4 g
• Flat Cabinets
Technical Data/Ratings
• Same wire entry as
regular screw terminals
Approvals
UL
CB
SCHEME
60947-7-1
0.2-2.5 mm2
-
60947-7-1
60947-7-1
0.2-2.5 mm2
0.2-4 mm2
E220514
E220514
Wire Size
CXS2.5
CXS4
24-12 AWG
-
-
24-12 AWG
24-10 AWG
-
24-10 AWG
0.2-4 mm2
Voltage Rating
Current Rating
600 V
1000V AC/DC
24A
600 V
30A
1000V AC/DC
32A
600 V
1000V AC/DC
–
20A
–
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
9 mm
10 mm
10 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CXS2.5
50
50
50
50
50
50
50
50
CXS4
50
50
50
50
50
50
50
50
CXSG2.5
CXSG4
Yellow / Green
50
50
Red
R
CXS2.5/R
CXS2.5/BU
CXS2.5/BL
CXS2.5/O
CXS2.5/G
CXS2.5/Y
CXS2.5/W
CXS4/R
CXS4/BU
CXS4/BL
CXS4/O
CXS4/G
CXS4/Y
CXS4/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Accessories
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
End Plate
EPCXS2.5
EPCXS2.5
EPCXS2.5
EPCXS2.5
50
50
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
16 pole
Shorting Link/
Jumpers
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
JX4/2
JX4/3
JX4/4
–
–
–
JX4/8
JX4/10
JX4/16
100
50
50
–
–
–
10
10
10
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
–
100
50
50
50
10
10
10
10
–
Test Plug
TX2.5
50
–
–
–
–
Marking Tag
Warning Label
MT5
WLX2.5
100
100
MT5
WLX2.5
100
100
MT5
WL2.5
100
100
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
77
CX-PLUGGABLE
PLUGGABLE FEED-THROUGH TERMINAL BLOCKS
SPRING TERMINAL BLOCKS
CX2.5/1B
CX2.5PN
CX2.5SN
HIGHLIGHTS
FEATURES
• Pluggable Terminal Blocks
• Pluggable Wire to DINꢀRail
connection
(CX2.5/1B-CX2.5PN)
• Pluggable Wire to Wire
DIN Rail Base
Stackable Terminal Plug
Stackable Terminal Socket
Connection
Dimensions & Weight
Width
(CX2.5SN - CX2.5PN)
• Easy Clip multi-wire
solution
• Polarizing plug with
coding pin CXPOL
• 2/4 way strain relief
(CXS2RN, CXS4RN)
5 mm
5 mm
5 mm
18 mm
Length
50.8 mm
17.5 mm
42.0 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
38.2 mm
45.7 mm
40.0 mm
Weight per piece
6.6 g
6.3 g
6.0 g
echnical Data/Ratings
Approvals
UL
UL
UL
CB
APPLICATIONS
• Wire harness for easy
connection
• Pluggable wire to wire
connection inside panels
SCHEME
60947-7-1
0.2-2.5 mm2
800 V
60947-7-1
0.2-2.5 mm2
60947-7-1
0.2-2.5 mm2
Wire Size (solid / stranded)
Voltage Rating
24-12 AWG
300 V
24-12 AWG
300 V
24-12 AWG
300 V
800 V
800 V
Current Rating
20 A
24 A
20 A
24 A
20 A
24 A
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
8 mm
8 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
CXSR4N
CX2.5PN
Terminal Blocks
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard) Start Element CX2.5/1B
CX2.5PN
50
50
50
50
50
50
50
CX2.5SN
50
50
50
50
50
50
50
Last Element
2 pole
3 pole
4 pole
5 pole
6 pole
CX2.5PLN
CX2.5PN/2
CX2.5PN/3
CX2.5PN/3
CX2.5PN/4
CX2.5PN/5
CX2.5SLN
CX2.5SN/2
CX2.5SN/3
CX2.5SN/4
CX2.5SN/5
CX2.5SN/6
CX2.5/1B
CXLPN
Cat. No.
Std. Pk.
50
Cat. No.
–
Std. Pk.
–
Cat. No.
–
Std. Pk.
–
Accessories
End Plate
EPCX2.5
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
CX2.5PN
End Clamp
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
Shorting Link/
Jumpers
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
100
50
50
50
10
10
10
10
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
CXSR2N
DIN Mounting Foot
Locking Clip
–
–
–
–
–
–
CXDIN
–
25
–
CXLPN
25
2 Way
4 Way
CXDIN
Strain Relief
–
–
–
–
CXSR2N
CXSR4N
25
25
CXSR2N
CXSR4N
25
25
Coding Pin
CXPOL
MT5
25
CXPOL
25
CXPOL
25
Marking Tag
1 Pk. (100 tags) MT5
1 Pk. (100 tags) MT5
1 Pk. (100 tags)
78
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
CX-DISTRIBUTION
COMPACT HYBRID DISTRIBUTION TERMINAL BLOCKS
SPRING TERMINAL BLOCKS
CXDB35/10
CXDB35/10A
HIGHLIGHTS
FEATURES
• Hybrid Distribution
Terminal Block
with
Allen Screw
• Screw input (115A)
• 4 spring clamp outputs
(4 x41A)
1 Flat Head Screw Input
4 Spring Clamp Outputs
1 Hex Screw Input
• Modular system
4 Spring Clamp Outputs
• Standard slot & hex screw versions
• Expandable with standard CX Series
jumpers and
terminal blocks
• Easy Installation
Dimensions & Weight
Width
16 mm
16 mm
Length
81.6 mm
81.6 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
46.8 mm
54.3 mm
46.8 mm
54.3 mm
Weight per piece
53.2 g
53.2 g
APPLICATIONS
• Miniature Circuit Breaker (MCB)
General Specifications
distribution
Approvals
• Limited space distribution
CB
SCHEME
E220514
60947-7-1
E220514
60947-7-1
Voltage Rating
600 V
1000V AC/DC
600 V
1000V AC/DC
Insulation Material
Polyamide 66
Polyamide 66
Output Expansion
INPUT
CXDB35/10A
Technical Data/Ratings
Wire Size (solid / stranded)
14-2 AWG
1.5-35 mm2
14-2 AWG
1.5-35 mm2
Current Rating
Torque
115 A
25lb-in
125 A
2.5Nm
115 A
25lb-in
125 A
2.5Nm
2 x CX6
Terminal Blocks
Installation Instructions
Wire Stripping Length
Screwdriver
(see page 64)
17 mm
Flat Head 1.0 x 5.5 mm
17 mm
Hex Screw M5
JX6/3
OUTPUT
Technical Data/Ratings
Wire Size (solid / stranded)
24-8 AWG
0.2-10 mm2
41 A
24-8 AWG
41 A
0.2-10 mm2
41 A
Current Rating
41 A
MCB Distribution Example
Installation Instructions
Wire Stripping Length
Screwdriver
15 mm
Flat Head 0.8 x 4 mm
15 mm
Flat Head 0.8 x 4 mm
Terminal Blocks
Cat. No.
Std. Pk.
20
Cat. No.
Std. Pk.
20
Grey
CXDB35/10
CXDB35/10A
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Accessories
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Clamp
Jumpers
CA702
CA802
CA103
50
50
50
CA702
CA802
CA103
50
50
50
JX6/2
JX6/3
JX6/4
JX6/10
100
50
50
10
JX6/2
JX6/3
JX6/4
JX6/10
100
50
50
10
Marking Tag
MT16
1 Pk. (100 tags) MT16
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
79
ANGULAR SERIES
ANGULAR FEED-THROUGH
SPRING TERMINAL BLOCKS
AS2.5
AS4
AS6
HIGHLIGHTS
FEATURES
• 45” Wire entry for easy
installation
• 2.5mm to 8mm terminal
2 Connection Feed-Through
2 Jumper Slots
2 Connection Feed-Through
2 Jumper Slots
2 Connection Feed-Through
2 Jumper Slots
blocks
Dimensions & Weight
Width
• 22-8 AWG wire sizes
• 2, 3, and 4 Connection
Ground Terminals
• Accessories
5 mm
6 mm
8 mm
Length
54 mm
61.5 mm
74 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
44.0 mm
51.0 mm
44.0 mm
51.0 mm
49.3 mm
57.0 mm
APPLICATIONS
• Panels with limited wiring
space
Weight per piece
6.5 g
9.0 g
14.8 g
Technical Data/Ratings
Approvals
• Vibration Applications
• Elevator Cabinets
• People Movers
CB
SCHEME
60947-7-1
60947-7-1
0.2-4 mm2
800V AC/DC
32 A
60947-7-1
0.2-6 mm2
800V AC/DC
41 A
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
22-12 AWG 0.34-2.5 mm2
22-10 AWG
22-8 AWG
• Transportation
600 V
25 A
800V AC/DC
24 A
600 V
35 A
600 V
50 A
Current Rating
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
11 mm
15 mm
15 mm
Flat Head 0.5 x 3mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.8 x 4 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
AS2.5
100
100
100
100
100
100
100
100
AS4
100
100
100
100
100
100
100
100
AS6
50
50
50
50
50
50
50
50
Red
R
AS2.5/R
AS2.5/BU
AS2.5/BL
AS2.5/O
AS2.5/G
AS2.5/Y
AS2.5/W
AS4/R
AS4/BU
AS4/BL
AS4/O
AS4/G
AS4/Y
AS4/W
AS6/R
AS6/BU
AS6/BL
AS6/O
AS6/G
AS6/Y
AS6/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPAS2.5
Std. Pk.
50
Cat. No.
EPAS4
Std. Pk.
50
Cat. No.
EPAS6
Std. Pk.
50
Accessories
End Plate
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA103
CA702
CA802
50
50
50
CA103
CA702
CA802
50
50
50
CA103
CA702
CA802
50
50
50
2 Pole Jumper
CA801/1
CA801/1-3
CA901/1
100
100
100
CA801/2
CA801/2-3
CA901/2
100
100
100
CA801/3
CA801/3-3
CA901/3
100
100
100
Jumpers Alternate
Push in wire jumper
AS6 to AS4
Step Down
Jumper
–
–
CA901/4
100
–
100
–
CA901/4
CA901/5
–
100
100
–
AS6 to AS2.5
AS4 to AS2.5
AS6 to AS2.5
CA901/5
CA901/6
CA801/8
100
100
100
–
CA901/6
–
CA801/8
100
MT5
1 Pk. (100 tags)
Marking Tag
MT6
1 Pk. (100 tags) MT8
1 Pk. (100 tags)
80
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
ANGULAR SERIES
MULTI-CONNECTION ANGULAR FEED-THROUGH
SPRING TERMINAL BLOCKS
AS2.5/3
AS2.5/4
AS4/3
AS4/4
3 Connection Feed-Through
2 Jumper Slots
4 Connection Feed-Through
3 Connection Feed-Through
2 Jumper Slots
4 Connection Feed-Through
Dimensions & Weight
Width
5 mm
5 mm
6 mm
6 mm
Length
54 mm
54 mm
61.5 mm
61.5 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
44.0 mm
51.0 mm
44.0 mm
51.0 mm
44.0 mm
51.0 mm
44.0 mm
51.0 mm
Weight per piece
7.5 g
15.5 g
11.0 g
12.6 g
Technical Data/Ratings
Approvals
CB
SCHEME
60947-7-1
22-12 AWG 0.34-2.5 mm2
60947-7-1
0.2-4 mm2
800V AC/DC
32 A
E220514
60947-7-1
22-12 AWG 0.34-2.5 mm2
E220514
E220514
E220514
60947-7-1
0.2-4 mm2
800V AC/DC
Wire Size (solid / stranded)
Voltage Rating
22-10 AWG
22-10 AWG
600 V
600 V
25 A
800V AC/DC
24 A
600 V
25 A
800V AC/DC
24 A
600 V
35 A
Current Rating
35 A
32 A
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
11 mm
11 mm
15 mm
15 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
AS2.5/3
100
100
100
100
100
100
100
100
AS2.5/4
100
100
100
100
100
100
100
100
AS4/3
100
100
100
100
100
100
100
100
AS4/4
100
100
100
100
100
100
100
100
Red
R
AS2.5/3/R
AS2.5/3/BU
AS2.5/3/BL
AS2.5/3/O
AS2.5/3/G
AS2.5/3/Y
AS2.5/3/W
AS2.5/4/R
AS2.5/4/BU
AS2.5/4/BL
AS2.5/4/O
AS2.5/4/G
AS2.5/4/Y
AS2.5/4/W
AS4/3/R
AS4/3/BU
AS4/3/BL
AS4/3/O
AS4/3/G
AS4/3/Y
AS4/3/W
AS4/4/R
AS4/4/BU
AS4/4/BL
AS4/4/O
AS4/4/G
AS4/4/Y
AS4/4/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPAS2.5
Std. Pk.
50
Cat. No.
EPAS2.5
Std. Pk.
50
Cat. No.
EPAS4
Std. Pk.
50
Cat. No.
EPAS4
Std. Pk.
50
Accessories
End Plate
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA103
CA702
CA802
50
50
50
CA103
CA702
CA802
50
50
50
CA103
CA702
CA802
50
50
50
CA103
CA702
CA802
50
50
50
2 Pole Jumper
CA801/1
CA801/1-3
CA901/1
100
100
100
DOES NOT ACCEPT JUMPERS
CA801/2
CA801/2-3
CA901/2
100
100
100
DOES NOT ACCEPT JUMPERS
Jumpers Alternate
Push in wire jumper
–
–
–
–
–
–
–
–
Step Down
Jumper
AS6 to AS4
–
–
–
–
–
–
–
–
–
–
CA901/4
100
–
100
–
–
–
–
–
–
–
–
–
AS6 to AS2.5
AS4 to AS2.5
AS6 to AS2.5
CA901/5
CA901/6
CA801/8
100
100
100
–
CA901/6
–
MT5
1 Pk. (100 tags)
Marking Tag
MT5
1 Pk. (100 tags) MT6
1 Pk. (100 tags) MT6
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
81
ANGULAR SERIES
DOUBLE LEVEL ANGULAR FEED-THROUGH
SPRING TERMINAL BLOCKS
AS6/3
ADL2.5(E)D1/D2
ADLG2.5
1
2
1
2
3
4
3
4
ADL2.5(E)D1
ADL2.5(E)D2
3 Connection Feed-Through
2 Jumper Slots
Double Level with built-in Diode
for circuit protection
Double Level with additional
snap-on grounding connection
Dimensions & Weight
8 mm
Width
5 mm
5 mm
74 mm
Length
79.5 mm
83.7 mm
49.5 mm
57 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
57.5 mm
65 mm
64.8 mm
72.3 mm
18.6 g
Weight per piece
14.0 g
20.9 g
Technical Data/Ratings
Approvals
CB
SCHEME
E220514
60947-7-1
0.2-6 mm2
E220514
22-12 AWG 0.34-2.5 mm2
E220514
22-12 AWG
600V
60947-7-1
60947-7-1
0.34 mm2
22-8 AWG
Wire Size (solid / stranded)
Voltage Range
600V
50 A
800
V
300V
25 A
800
V
800
V
41 A
Current Rating
24 A
20 A
24 A
Polyamide 66
Insulation Material
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
15 mm
Flat Head 0.8 x 4 mm
11 mm
Flat Head 0.5 x 3 mm
10 mm
Flat Head 0.5 x 3 mm
Terminal Blocks
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
50
Grey (standard)
S6/3
ADL2.5(E)D1
ADL2.5(E)D2
50
50
DLG2.5
ellow/Green
Red
Blue
R
S6/3/R
S6/3/BU
S6/3/BL
S6/3/O
S6/3/G
S6/3/Y
S6/3/W
50
50
50
50
50
50
50
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPAS6
Std. Pk.
50
Cat. No.
EPADL2.5
Std. Pk.
50
Cat. No.
Std. Pk.
50
Accessories
End Plate
EPADLG2.5
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
End Stop
CA103
CA702
CA802
50
50
50
CA103
CA702
CA802
50
50
50
CA103
CA702
CA802
50
50
50
Jumpers Adjacent
Jumpers Alternate
Push in wire jumper
CA801/3
CA801/3-3
CA901/3
100
100
100
CA801/1
CA801/1-3
CA901/1
100
100
100
–
–
–
–
–
–
AS6 to AS4
Step Down
Jumper
CA901/4
CA901/5
–
100
100
–
–
–
–
–
–
–
–
–
–
–
AS6 to AS2.5
AS4 to AS2.5
AS6 to AS2.5
CA901/5
CA901/6
CA901/8
100
100
100
CA801/8
100
MT8
1 Pk. (100 tags) MT5
1 Pk. (100 tags)
MT2G
1 Pk. (100 tags)
Marking Tag
82
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
ANGULAR SERIES
TRIPLE LEVEL ANGULAR SPRING CLAMP
SPRING TERMINAL BLOCKS
ATLG2.5
ATL2.5
ATL2.5H
Triple Level Spring Terminal
Jumper Slot on each Level
Triple Level with
top level Feed-Through and
mid/bottom level connections
Triple Level with additional
snap-on grounding connection
Dimensions & Weight
Width
5 mm
5 mm
5 mm
Length
100 mm
76.1 mm
100 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
75.0 mm
82.5 mm
75.0 mm
82.5 mm
75.0 mm
82.5 mm
Weight per piece
19.4 g
12.2 g
23.6 g
Technical Data/Ratings
Approvals
UL
CB
SCHEME
E220514
22-12 AWG
600 V
60947-7-1
0.2-2.5 mm2
500 V
60947-7-1
0.2-2.5 mm2
E220514
22-12 AWG
600 V
60947-7-1
0.2-2.5 mm2
500 V
Wire Size (solid / stranded)
Voltage Rating
22-12 AWG
-
-
500 V
Current Rating
20 A
24 A
24 A
20 A
24 A
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
10 mm
10 mm
10 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
100
Grey (standard)
ATL2.5
100
100
100
100
100
100
100
100
ATL2.5H
100
100
100
100
100
100
100
100
ATLG2.5
Yellow/Green
Red
R
ATL2.5/R
ATL2.5/BU
ATL2.5/BL
ATL2.5/O
ATL2.5/G
ATL2.5/Y
ATL2.5/W
ATL2.5H/R
ATL2.5H/BU
ATL2.5H/BL
ATL2.5H/O
ATL2.5H/G
ATL2.5H/Y
ATL2.5H/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPATL2.5
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Accessories
End Plate
EPATL2.5H
EPATLG2.5
2511120
CA701-15/S
20
20
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
CA702
CA802
CA202
CA103
50
50
50
50
End Stop
CA702
CA802
CA202
CA103
50
50
50
50
CA702
CA802
CA202
CA103
50
50
50
50
2 pole
3 pole
CA801/A2
CA801/A3
CA801/A4
CA801/A10
100
100
100
10
Push In
Jumpers
CA801/A2
CA801/A3
CA801/A4
CA801/A10
100
100
100
10
CA801/A2
CA801/A3
CA801/A4
CA801/A10
100
100
100
10
4 pole
10 pole
Marking Tag
MT2G
1 Pk. (100 tags)
MT2G
1 Pk. (100 tags)
MT2G
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
83
ANGULAR SERIES
GROUND / EARTH ANGULAR SPRING CLAMP
SPRING TERMINAL BLOCKS
AGT2.5
AGT4
AGT6
AGT2.5/3
2 Connection Ground Terminal
Feed-Through
2 Connection Ground Terminal
Feed-Through
2 Connection Ground Terminal
Feed-Through
3 Connection Ground Terminal
Feed-Through
Dimensions & Weight
Width
5 mm
6 mm
8 mm
5 mm
Length
54 mm
61.5 mm
74 mm
54 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
49.5 mm
57 mm
49.5 mm
57 mm
55.5 mm
63 mm
49.5 mm
57 mm
Weight per piece
13.5 g
12.0 g
19.0 g
14.5 g
Technical Data/Ratings
Approvals
CB
SCHEME
E220514
60947-7-1
22-12 AWG 0.34-2.5 mm2
E220514
22-10 AWG
600 V
60947-7-1
0.2-4 mm2
800V AC/DC
-
E220514
22-10 AWG
600 V
60947-7-1
0.2-6 mm2
800V AC/DC
-
E220514
60947-7-1
22-12 AWG 0.34-2.5 mm2
Wire Size (solid / stranded)
Voltage Rating
600 V
-
800V AC/DC
-
600 V
-
800V AC/DC
-
Current Rating
-
-
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
11 mm
15 mm
15 mm
12 mm
Flat Head 0.5 x 3 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.8 x 4 mm
Flat Head 0.5 x 3 mm
Terminal Blocks
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
100
Yellow/Green
AGT2.5
AGT4
AGT6
AGT2.5/3
Cat. No.
EPAS2.5
Std. Pk.
50
Cat. No.
EPAS4
Std. Pk.
50
Cat. No.
EPAS6
Std. Pk.
50
Cat. No.
EPAS2.5
Std. Pk.
50
Accessories
End Plate
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
MT5
1 Pk. (100 tags) MT6
1 Pk. (100 tags)
Marking Tag
MT8
1 Pk. (100 tags) MT5
1 Pk. (100 tags)
84
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
ANGULAR SERIES
GROUND / EARTH ANGULAR SPRING CLAMP
SPRING TERMINAL BLOCKS
AGT2.5/4
AGT4/3
AGT4/4
AGT6/3
4 Connection Ground Terminal
Feed-Through
3 Connection Ground Terminal
Feed-Through
4 Connection Ground Terminal
Feed-Through
3 Connection Ground Terminal
Feed-Through
Dimensions & Weight
Width
5 mm
6 mm
6 mm
8 mm
Length
54 mm
61.5 mm
61.5 mm
74 mm
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
44.0 mm
51.6 mm
44.0 mm
51.6 mm
44.0 mm
51.6 mm
49.3 mm
57.0 mm
Weight per piece
15.5 g
14.5 g
18.6 g
22.0 g
Technical Data/Ratings
Approvals
CB
SCHEME
60947-7-1
22-12 AWG 0.34-2.5 mm2
60947-7-1
0.2-4 mm2
800V AC/DC
-
E220514
22-10 AWG
600 V
60947-7-1
0.2-4 mm2
800V AC/DC
-
60947-7-1
0.2-6 mm2
800V AC/DC
-
E220514
E220514
22-10 AWG
600 V
E220514
22-8 AWG
600 V
Wire Size (solid / stranded)
Voltage Rating
600 V
-
800V AC/DC
-
Current Rating
-
-
-
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
12 mm
15 mm
15 mm
15 mm
Flat Head 0.5 x 3 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.8 x 4 mm
Terminal Blocks
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
100
Yellow/Green
AGT2.5/4
AGT4/3
AGT4/4
AGT6/3
Cat. No.
EPAS2.5
Std. Pk.
50
Cat. No.
EPAS4
Std. Pk.
50
Cat. No.
EPAS4
Std. Pk.
50
Cat. No.
EPAS6
Std. Pk.
50
Accessories
End Plate
DIN Rail
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
2511120
CA701-15/S
20
20
MT5
1 Pk. (100 tags) MT6
1 Pk. (100 tags) MT6
1 Pk. (100 tags) MT8
1 Pk. (100 tags)
Marking Tag
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
85
ACCESSORIES
JUMPERS / SHORTING LINKS
SPRING TERMINAL BLOCKS
CX SERIES
Push-In Technology Multipole Jumpers
Terminal Block Series Poles
Cat. No. Std. Pk.
2 Pole
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
100
50
50
50
10
10
10
10
3 Pole
CX2.5 Series
4 Pole
CXG2.5 Series
5 Pole
CXDL2.5
6 Pole
CXK2.5
7 Pole
CXS2.5
8 Pole
10 Pole JX2.5/10
2 Pole
3 Pole
4 Pole
8 Pole
10 Pole
16 Pole
JX4/2
JX4/3
JX4/4
JX4/8
JX4/10
JX4/16
100
50
50
10
10
10
Easy Breakout
Felt-Tip
Marking
CX4 Series
CXG4 Series
CXF4
CXCC4
CXS4
2 Pole
3 Pole
4 Pole
10 Pole
JX6/2
JX6/3
JX6/4
JX6/10
100
50
50
CX6 Series
CXG6 Series
CXDB35/10
10
Channels
CX10 Series
CXG10 Series
2 Pole
JX10/2
20
ANGULAR SERIES
Push-In
Wire Jumper
2 Pole
Adjectant Jumper
Alternate
Jumper
Push-In
Wire Jumper
2 Pole
Adjectant Jumper
Alternate
Jumper
Terminal Block Series
AS2.5 / ADL2.5 Series
AS4 Series
Cat. No.
CA801/1
CA801/2
CA801/3
Std. Pk.
100
100
Cat. No.
Std. Pk.
100
100
Cat. No.
CA901/1
CA901/2
CA901/3
Std. Pk.
CA801/1-3
CA801/2-3
CA801/3-3
100
100
100
AS6 Series
100
100
STEP DOWN JUMPERS
Used for jumpering terminal blocks of different sizes.
CX SERIES
ANGULAR SERIES
Jumper for
CX10 to CX2.5
CX6 to CX2.5
CX10 to CX4
CX6 to CX4
Cat. No.
JXS10/2.5
JXS6/2.5
JXS10/4
JXS6/4
Std. Pk.
50
50
50
50
Jumper for
AS6 to AS2.5
AS6 to AS4
Cat. No.
CA901/5
CA901/4
CA901/6
Std. Pk.
100
100
100
AS4 to AS2.5
86
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
ACCESSORIES
ENDPLATES
CX SERIES
SPRING TERMINAL BLOCKS
ANGULAR SERIES
Terminal Block
Cat. No.
Dimensions
Std. Pk.
Terminal Block
Cat. No.
Dimensions
Std. Pk.
CX2.5
CXG2.5
AS2.5
AS2.5/XX
AGT2.5
EPCX2.5
30.5 x 49.7 x 1.5mm
50
EPAS2.5
35 x 54 x 1.5mm
50
AGT2.5/XX
CX4
CXG4
EPCX4
30.5 x 54.8 x 1.5mm
35.3 x 62.1 x 1.5mm
41.6 x 70 x 1.5mm
30.5 x 62.2 x 1.5mm
30.5 x 74.7 x 1.5mm
30.5 x 70.5 x 1.5mm
30.5 x 86.2 x 1.5mm
35.3 x 82.2 x 1.5mm
41.6 x 95.3 x 1.5mm
50
50
50
50
50
50
50
50
50
AS4
AS4/XX
AGT4
CX6
CXG6
EPCX6
EPAS4
EPAS6
27.5 x 61 x 1.5mm
33.5 x 74 x 1.5mm
50
50
AGT4/XX
CX10
CXG10
AS6
AS6/XX
AGT6
EPCX10
CX2.5/3
CXG2.5/3
CXK2.5
AGT6/XX
EPCX2.5/3
EPCX2.5/4
EPCX4/3
EPCX4/4
EPCX6/3
EPCX10/3
ADL2.5
EPADL2.5
EPADLG2.5
EPATL2.5
43.5 x 80 x 1.5mm
83.7 x 58 x 1.2mm
100 x 69.7 x 1.2mm
77.3 x 69.7 x 1.2mm
100 x 68.7 x 1.2mm
50
50
50
50
50
CX2.5/4
CXG2.5/4
ADLG2.5
CX4/3
CXG4/3
CXK4
ATL2.5
ATL2.5H
EPATL2.5H
EPATLG2.5
CX4/4
CXG4/4
ATLG2.5
CX6/3
CXG6/3
END STOPS
CA103
CX10/3
CXG10/3
Screwless
Snap On
CXDL2.5
CXDLG2.5
EPCXDL2.5
EPCXS2.5
EPCXS4
41.8 x 72.7 x 1.5mm
35.6 x 43 x 1.5mm
50
50
50
CXS2.5
CXS4
Cat. No. Dimensions Std. Pk.
CA103 35 x 41 x 6mm 50
CA702
CA802
PARTITION PLATES
Cat. No. Dimensions Std. Pk.
Cat. No. Dimensions Std. Pk.
CA802 32 x 45 x 8mm 50
CA702
34 x 45 x 9mm 50
CX SERIES
TEST PLUGS
Terminal Block
Cat. No.
Dimensions
Std. Pk.
Terminal Block
CX2.5, CXG2.5,
CXDL2.5, CXG4,
CXM2.5, CXMG2.5
Cat. No.
Std. Pk.
CX2.5, CXG2.5
CX4, CXG4
PPCX4
42.4 x 59 x 2mm
50
TX2.5
20
CX2.5/3,
CXG2.5/3
CX4/3, CXK2.5
CX4, CXG4,
CX7, CXG6
PPCX4/3
PPCX4/4
PPCX6
42.4 x 74.7 x 2mm
42.4 x 95 x 2mm
53.5 x 76 x 1mm
50
50
50
TX4
TX6
20
20
CX6, CXDB
CX2.5/4,
CXG2.5/4
CX4/4, CXK4/4
CX6, CX10
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
87
OVERVIEW
INTRODUCTION
MINI / PANEL MOUNT TERMINALS
SCREW CLAMP TECHNOLOGY
• Screw clamp & Spring Clamp Technology versions
• Extremely Compact wiring solution
• 15mm Mini Rail Terminals
• High Temperature Ceramic Solution
• Reliable Gas-tight connection
• Modular easy snap together Panel Mount Terminals
E220514
60947-7-1
MATERIAL SPECIFICATIONS
Current Carrying Metal
Terminal Block Housing
• Polyamide PA66 Housing
• Self-extinguishing
Polyamide 66 Specifications
Upper Temperature Limit: 105°C
Lower Temperature Limit: -50°C
Screw Terminals
Corrosion free material
Spring Terminals
Corrosion free material
• High mechanical strength
Flammability UL94:
Volume Resistivity:
Surface Resistivity:
V2/ V0
1012 Ω cm
1010 Ω
• Clamp: Zinc Plated Steel
• Screw: Steel
• Spring: Stainless Steel
• Current Bar: Copper Alloy
• Current Bar: Brass/
Tin Plated Copper
SELECTION GUIDE
Screw Terminal Blocks
• Extremely Compact size
• Various mounting options
• 15mm Mini Rail
• Panel Mount
• Modular system
• Jumper Accessories
• Screw Clamp Technology
15mm Mini Rail
CMT4
Panel Mount
CMB4
page 89
page 90
Spring Clamp Terminal Blocks
• Extremely Compact size
• Various mounting options
• 15mm Mini Rail
• Panel Mount
• Modular Snap together Systems
• Spring Clamp Technology
15mm Mini Rail
CXM2.5
Panel/DIN Rail
Panel Mount
CM Series
page 93
CSCP Series
page 91
page 92
High Temperature Ceramic Terminal Blocks
• High Temperatures up to 600°C
• Ceramic Material
• 3 sizes
• Up to 65A/ 300V
• Free floating or mounting hole option
High Temperature
CB Series
page 94
88
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
MINI RAIL CMT SERIES
MINI RAIL SCREW TERMINAL BLOCKS
MINI / PANEL MOUNT TERMINALS
CF4U
CMT4
CGMT4
HIGHLIGHTS
FEATURES
• Extremely Compact Size
• Screw Cage Clamp
• Mountable on DIN15
Mini Rail
2 Connection Feed-Through
Internal Jumper Provision
2 Connection Ground Terminal
Internal Jumper Provision
5 x 20 mm
Fuse Terminal
Dimensions & Weight
Width
• Feed Through Terminal
• Ground Terminal
6 mm
6 mm
8 mm
• Internal Jumper possibility
Length
27 mm
27 mm
57.0 mm
• EX / IECEx approved
Height w DIN15 Rail
Weight per piece
15mm
30.4 mm
5.5 g
30.7 mm
9.5 g
50.3 mm | 57.6 mm
14.8 g
APPLICATIONS
Technical Data/Ratings
Approvals
• Limited Space Panels
• High Density Wiring
Solutions
E220514
60947-7-1
E220514
22-10 AWG
300 V
60947-7-1
60947-7-3
0.2-4 mm2
800 V AC/DC
6.3 A
E220514
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
22-10 AWG
300 V
0.2-4 mm2
500 V AC/DC
32 A
0.2-4 mm2
500 V AC/DC
-
22-10 AWG
600 V
10 A
35 A
-
7lb-in
0.5Nm
7lb-in
0.8Nm
7lb-in
0.5Nm
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
8 mm
9.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
Grey (standard)
CMT4
100
100
100
100
100
100
100
100
CGMT4
Yellow/Green
CF4U
CF4U/BU
CF4U/BL
50
50
50
Red
R
CMT4/R
CMT4/BU
CMT4/BL
CMT4/O
CMT4/G
CMT4/Y
CMT4/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
EPCMT4
Std. Pk.
50
Cat. No.
–
Std. Pk.
–
Accessories
End Plate
Cat. No.
–
Std. Pk.
–
Isolation Partition
DIN Rail
PPCMT4
50
50
–
–
–
–
CA601/S
CA601/S
50
CA601/S
50
15mm
End Clamp
CA602
100
CA602
100
–
–
–
–
–
–
–
–
–
–
2 pole
Internal Jumper
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
–
–
–
–
–
–
–
–
3 pole
4 pole
10 pole
2 pole
3 pole
Insulated Internal
Jumper
CA747/2
CA747/3
CA747/4
CA747/10
100
100
100
10
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4 pole
10 pole
2 pole
3 pole
External Jumper
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
CA711/2
CA711/3
CA711/4
CA711/10
100
50
4 pole
50
10 pole
20
Test Socket
Marking Tag
CA707/TS/03
MT2
100
CA707/TS/03
–
–
–
1 Pk. (100 tags) MT2
1 Pk. (100 tags) MT8
MT6
1 Pk. (100 tags)
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
89
PANEL MOUNT CMB SERIES
PANEL MOUNT SCREW TERMINAL BLOCKS
MINI / PANEL MOUNT TERMINALS
CMB4
HIGHLIGHTS
FEATURES
• Extremely Compact Size
• Screw Cage Clamp
• Panel Mountable with any
2 Connection Feed Through
Dimensions & Weight
Width
Pre-assembled Terminal Blocks
length M3 screw
6 mm
• End / Mounting Section
No. of Poles
Cat. No
CMB4/2
CMB4/3
CMB4/4
CMB4/5
CMB4/6
CMB4/7
CMB4/8
CMB4/9
CMB4/10
CMB4/11
CMB4/12
CMB4/13
CMB4/14
Total Width (a) Hole Spacing (b)
with M3 mounting holes
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
26 mm (1.02”)
32 mm (1.26”)
38 mm (1.50”)
44 mm (1.73”)
50 mm (1.97”)
56 mm (2.20”)
62 mm (2.44”)
68 mm (2.68”)
74 mm (2.91”)
80 mm (3.15”)
86 mm (3.39”)
92 mm (3.62”)
98 mm (3.86”)
19 mm (0.75”)
25 mm (0.98”)
31 mm (1.22”)
37 mm (1.46”)
43 mm (1.69”)
49 mm (1.93”)
55 mm (2.17”)
61 mm (2.40”)
67 mm (2.64”)
73 mm (2.87”)
79 mm (3.11”)
85 mm (3.35”)
91 mm (3.58”)
97 mm (3.82”)
103 mm (4.06”)
109 mm (4.29”)
115 mm (4.53”)
121 mm (4.76”)
127 mm (5.00”)
133 mm (5.24”)
139 mm (5.47”)
145 mm (5.71”)
151 mm (5.94”)
Length
27 mm
28 mm
5.5 g
• Stackable design for flexible
Height
length configurations
• Modular snap-together
Weight per piece
design for quick assembly
and installation
Technical Data/Ratings
Approvals
• Endplates with mounting
holes
60947-7-1
E220514
• Internal Jumper possibility
Wire Size (solid / stranded)
22-10 AWG
0.2-4 mm2
• EX / IECEx approved
• Pre-assembled Blocks
Voltage Rating
300 V
35 A
500 V AC/DC
32 A
available in all pole configu-
Current Rating
rations and various colors
CMB4/15 104 mm (4.09”)
CMB4/16 110 mm (4.33”)
CMB4/17 116 mm (4.57”)
CMB4/18 122 mm (4.80”)
CMB4/19 128 mm (5.04”)
CMB4/20 134 mm (5.28”)
CMB4/21 140 mm (5.51”)
CMB4/22 146 mm (5.75”)
CMB4/23 152 mm (5.98”)
CMB4/24 158 mm (6.22”)
Torque
7
lb-in
0.5Nm
Insulation Material
Polyamide 66
APPLICATIONS
• Cost Effective Wiring
Installation Instructions
Solutions
Wire Stripping Length
8 mm
• Compact Wiring Solutions
• Panel Mount Designs
Screwdriver
Flat Head 0.6 x 3.5mm
• High Density Wiring
Any length M3 screw may be used
Mounting Screw
Terminal Blocks
Cat. No.
Std. Pk.
b
a
Grey (standard)
CMB4
100
100
100
100
100
100
100
100
Red
R
CMB4/R
CMB4/BU
CMB4/BL
CMB4/O
CMB4/G
CMB4/Y
CMB4/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
Dimensions CMB4
W
Cat. No.
EPCMB4
SPCMB4
Std. Pk.
50
Accessories
End / Mounting Section
Mounting Section
Dimensions
EPCMB4
Separator Plate
50
2 pole
3 pole
4 pole
Internal
Jumper
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
10 pole
4 Pole Internal Jumper
CA727/4
2 pole
3 pole
4 pole
Insulated
Internal
Jumper
CA747/2
CA747/3
CA747/4
CA747/10
100
100
100
10
10 pole
CMB4
Terminal Block
2 pole
3 pole
4 pole
External
Jumper
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
10 pole
Test Socket
Marking Tag
CA707/TS/01
100
MT2
1 Pk. (100 tags)
End / Mounting Section
EPCMB4
90
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
MINI RAIL CXM SERIES
MINI RAIL SPRING TERMINAL BLOCKS
MINI / PANEL MOUNT TERMINALS
CXM2.5
CXMG2.5
CMS2.5
HIGHLIGHTS
FEATURES
• Extremely Compact Size
• Spring Clamp Style
• Mountable on DINꢀ15
Mini Rail
2 Connection Feed Through
2 Jumper Channels
2 Connection Ground Terminal
2 Jumper Channels
Side Entry Feed Through
• Feed Through Terminal
• Ground Terminal
Dimensions & Weight
Width
5 mm
5 mm
5 mm
• Side Entry Feed Through
• 2, 3, 4, 5, 6, 7, 10 pole
Push-In Jumpers
Length
37 mm
37 mm
31 mm
Height w DIN Rail 15 x 5.5 mm
Weight per piece
35 mm
5.9 g
35 mm
10.3 g
30.15 mm
5.9 g
• EX / IECEx approved
Technical Data/Ratings
APPLICATIONS
Approvals
CB
UL
SCHEME
• Limited Space Panels
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
• High Density Wiring
Wire Size (solid / stranded)
Voltage Rating
24-12 AWG
600 V
0.2-2.5 mm2
1000V AC/DC
24 A
24-12 AWG
0.2-2.5 mm2
1000V AC/DC
-
24-12 AWG
300 V
0.2-2.5 mm2
800V AC/DC
24 A
Solutions
600 V
-
• Machine Control Panels
• High Vibration
Current Rating
20 A
20 A
Applications
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
10 mm
10 mm
9 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CXM2.5
100
100
100
100
100
100
100
100
CXMG2.5
Yellow/Green
100
CMS2.5
100
100
100
100
100
100
100
100
Red
R
CXM2.5/R
CXM2.5/BU
CXM2.5/BL
CXM2.5/O
CXM2.5/G
CXM2.5/Y
CXM2.5/W
CMS2.5/R
CMS2.5/BU
CMS2.5/BL
CMS2.5/O
CMS2.5/G
CMS2.5/Y
CMS2.5/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Accessories
End Plate
EPCXM2.5
EPCXM2.5
EPCMS2.5
DIN Rail
CA601/S
CA602
50
CA601/S
CA602
50
CA601/S
CA602
50
15mm
End Clamp
100
100
100
2 pole
Jumper
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
100
50
50
50
10
10
10
10
JX2.5/2
JX2.5/3
JX2.5/4
JX2.5/5
JX2.5/6
JX2.5/7
JX2.5/8
JX2.5/10
100
50
50
50
10
10
10
10
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
10 pole
Spring Clamp Actuator
Marking Tag
SCA2-5
MT5
1
SCA2-5
1
–
–
1 Pk. (100 tags) MT5
1 Pk. (100 tags)
MT5
1 Pk. (100 tags)
Operating Tool
for use with
CXM2.5
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
91
PANEL MOUNT CSCP SERIES
PANEL MOUNT SPRING TERMINAL BLOCKS
MINI / PANEL MOUNT TERMINALS
CSCP2.5T
CSCP2.5T2
CXCP2.5/4
HIGHLIGHTS
FEATURES
• Extremely Compact Size
• Screw Cage Clamp
• Panel Mountable with any
screw
2 Connection Spring Terminal
Panel Mount
4 Connection Spring Terminal
Panel Mount
4 Connection Spring Terminal
DIN Rail Mount
Dimensions & Weight
Width
• Endplates with screw flange
• Stackable design for flexible
length configurations
5 mm
10 mm
10 mm
Length
35 mm
35 mm
35 mm
• Modular snap-together
design for quick assembly
and easy installation
Height w DIN Rail 35 x 7.5 mm
35 x 15 mm
34.5 mm
42 mm
21.3 mm (Panel Mount)
5.0 g
21.3 mm (Panel Mount)
9.5 g
• External Jumper possibility
• EX / IECEx approved
• Custom assemblies
Weight per piece
9.5 g
Technical Data/Ratings
Approvals
available in all pole configu-
rations and various colors
E220514
60947-7-1
E220514
60947-7-1
E220514
60947-7-1
Wire Size (solid / stranded)
Voltage Rating
22-14 AWG
600 V
0.2-2.5 mm2
800 V AC/DC
24 A
22-14 AWG
600 V
0.2-2.5 mm2
800 V AC/DC
24 A
22-12 AWG
600 V
0.2-2.5 mm2
800 V AC/DC
24 A
APPLICATIONS
• Cost Effective Panel Mount
Designs
Current Rating
20 A
20 A
20 A
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
• Limited Space Panels
• High Density Wiring
Solutions
Installation Instructions
Wire Stripping Length
Screwdriver
11 mm
11 mm
10 mm
• Machine Control Panels
• High Vibration Applications
Flat Head 0.5 x 3 mm
Any length M3 screw may be used
Flat Head 0.5 x 3 mm
Any length M3 screw may be used
Flat Head 0.5 x 3 mm
–
Mounting Screw
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CSCP2.5T
100
100
100
100
100
100
100
100
CSCP2.5T2
100
100
100
100
100
100
100
100
CXCP2.5/4
100
100
100
100
100
100
100
100
Operating Tool
for use with
CSCP2.5T2
Red
R
CSCP2.5T/R
CSCP2.5T/BU
CSCP2.5T/BL
CSCP2.5T/O
CSCP2.5T/G
CSCP2.5T/Y
CSCP2.5T/W
CSCP2.5T2/R
CSCP2.5T2/BU
CSCP2.5T2/BL
CSCP2.5T2/O
CSCP2.5T2/G
CSCP2.5T2/Y
CSCP2.5T2/W
CXCP2.5/4/R
CXCP2.5/4/BU
CXCP2.5/4/BL
CXCP2.5/4/O
CXCP2.5/4/G
CXCP2.5/4/Y
CXCP2.5/4/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Cat. No.
Std. Pk.
25
Cat. No.
Std. Pk.
25
Cat. No.
Std. Pk.
25
Accessories
End Section
Custom
Assembly
Example
EPCSCP2.5T
EPCSCP2.5T
EPCXCP2.5
Insulated Jumpers
(2 pole)
CA803/1
100
CA803/1
100
CA803/1
100
Marking Tag
MT4
1 Pk. (100 tags) MT3
SCA2-5
1 Pk. (100 tags) MT3
1 Pk. (100 tags)
1
Operating Tool
SCA2-5
1
1
SCA2-5
PANEL MOUNT
DIN RAIL MOUNT
CSCP2.5T2
CSCP2.5T2
EPCSCP2.5T
CXCP2.5/14
DIN Rail
EPCSCP2.5T
Mounting Foot
CSCP2.5T
CSCP2.5T
SCREW FLANGE
92
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
MICRO CM SERIES
MICRO PANEL MOUNT SPRING TERMINAL BLOCKS
II T
CM1.5S
CM2.5S
CM4S
HIGHLIGHTS
FEATURES
• Extremely Compact Size
• Spring Clamp Style
• End Sections with screw
flanges
CM1.5S
CM2.5S
CM4S
CM1.5S2
CM2.5S2
CM4S2
• 3 wire sizes
• 2, 4 connection terminals
• All colors
CM1.5S2
CM2.5S2
CM4S2
APPLICATIONS
• Transformer Terminal
Blocks
Dimensions
• Very Limited Space
Applications
Width
2 Connection
4 Connection
5 mm
8 mm
6 mm
10 mm
7 mm
12 mm
• Machine Control Panels
Length
26.5 mm
30.0 mm
33.7 mm
Height (Panel Mount)
Weight per piece
18.0 mm
20.0 mm
23.0mm
g
1.8 / 3.8 g
3.2 / 5.2 g
Technical Data/Ratings
Approvals
CB
SCHEME
60947-7-1
60947-7-1
60947-7-1
E220514
E220514
E220514
Wire Size (solid / stranded)
Voltage Rating
24-16 AWG
0.2-1.5 mm2
500V AC/DC
17 A
22-12 AWG
0.2-2.5 mm2
500V AC/DC
24 A
22-14 AWG
0.2-4 mm2
630V AC/DC
32 A
300 V
10 A
300 V
20 A
300 V
26 A
Current Rating
Insulation Material
Polyamide 66
Polyamide 66
Polyamide 66
Installation Instructions
Wire Stripping Length
Screwdriver
8 mm
9 mm
8 mm
Flat Head 0.5 x 3 mm
Flat Head 0.5 x 3 mm
Flat Head 0.6 x 3.5 mm
Terminal Blocks
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
2 Connections
Grey (standard)
CM1.5S
100
100
100
100
100
100
100
100
CM2.5S
100
100
100
100
100
100
100
100
CM4S
100
100
100
100
100
100
100
100
Red
R
CM1.5S/R
CM1.5S/BU
CM1.5S/BL
CM1.5S/O
CM1.5S/G
CM1.5S/Y
CM1.5S/W
CM2.5S/R
CM2.5S/BU
CM2.5S/BL
CM2.5S/O
CM2.5S/G
CM2.5S/Y
CM2.5S/W
CM4S/R
CM4S/BU
CM4S/BL
CM4S/O
CM4S/G
CM4S/Y
CM4S/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
4 Connections
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Grey (standard)
CM1.5S2
100
100
100
100
100
100
100
100
CM2.5S2
100
100
100
100
100
100
100
100
CM4S2
100
100
100
100
100
100
100
100
Red
R
CM1.5S2/R
CM1.5S2/BU
CM1.5S2/BL
CM1.5S2/O
CM1.5S2/G
CM1.5S2/Y
CM1.5S2/W
CM2.5S2/R
CM2.5S2/BU
CM2.5S2/BL
CM2.5S2/O
CM2.5S2/G
CM2.5S2/Y
CM2.5S2/W
CM4S2/R
CM4S2/BU
CM4S2/BL
CM4S2/O
CM4S2/G
CM4S2/Y
CM4S2/W
Blue
BU
BL
O
G
Y
Black
Orange
Green
Yellow
White
W
Accessories
Cat. No.
Std. Pk.
50
Cat. No.
Std. Pk.
50
Cat. No.
EPCM4S
Std. Pk.
50
End Plate
EPCM1.5S
EPCM2.5S
Spring Clamp Actuator
2 Connection
4 Connection
SCA2-5
1
SCA2-5
1
SCA2-5
1
Marking Tag
MT4
MT7.5
1 Pk. (100 tags) MT2
1 Pk. (100 tags) MT7.5
1 Pk. (100 tags) MT6
1 Pk. (100 tags) MT12
1 Pk. (100 tags)
1 Pk. (100 tags)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
93
™
EUROBLOCKS
HIGH TEMPERATURE CERAMIC EUROBLOCKSTM
PANEL MOUNT TERMINALS
CB4
CB6
CB16
HIGHLIGHTS
FEATURES
Technical Data/Ratings
Approvals
• Suitable for High
Temperatures up to
600°C (1112°F)
E220514
60947-7-1
E220514
60947-7-1
E220514
60947-7-1
• Temperature Rating
-40°C - 600°C
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
24-12 AWG 24-12 AWG 0.5-2.5mm2 22-10 AWG 22-10 AWG 0.5-4mm2 18-6 AWG 20-6 AWG 0.5-2.5mm2
300 V
20 A
300 V 800 VAC/DC
300 V
30 A
300 V 800 VAC/DC
300 V
65 A
300 V 800 VAC/DC
• 3 Sizes
30 A
lb-in
24 A
40 A
32 A
76 A
57 A
• 1, 2, 3, 4 Pole configurations
• Free floating or Panel Mount
• Up to 65A
6
lb-in
6
0.4Nm
6
lb-in
6
lb-in
0.5Nm
12 lb-in
12 lb-in
1.2Nm
Insulation Material
Ceramic
Ceramic
Ceramic
• Material:
Installation Instructions
Wire Stripping Length
• Housing: Steatite
• Clamp: Brass
8 mm
8 mm
8 mm
• Screws: Zinc Plated Steel
Screwdriver
Flat Head 0.5 x 3 mm
3.5 mm
Flat Head 0.8 x 4 mm
3.5 mm
Flat Head 0.8 x 4 mm
3.5 mm
Mounting Hole Size
Recommended Mounting Screw
M3 x 16
M3 x 16
M3 x 20
APPLICATIONS
• High Temperature
Environments
Cat. No. Std. Pk. Weight
Cat. No. Std. Pk. Weight
Cat. No. Std. Pk. Weight
Terminal Blocks
1 pole
2 pole
free floating
free floating
CB4/1
CB4/2
CB4/2H
CB4/3
CB4/3H
-
50
50
50
50
50
-
11.7 g
18.0 g
26.1 g
30.1 g
42.3 g
-
CB6/1
-
50
-
13.5 g
-
-
-
-
-
-
-
• Furnaces
• Heaters
• Process Equipment
• Machinery
with mounting holes
free floating
CB6/2H
-
50
-
27.3 g
-
CB16/2H
50
-
50
-
47.2 g
3 pole
-
-
44.6 g
-
with mounting holes
4 pole with mounting holes
CB6/3H
CB6/4H
50
50
42.5 g
29.1 g
CB16/3H
-
Dimensions (All dimensions are shown in mm, to convert to inches please divide by 25.4)
CB4/1
CB6/1
CB4/2H
CB6/2H
CB16/2H
CB4/2
14.6
12.6
16.5
23
25.5
19.5
23
25.5
23
28
18
24
6
26
6
31
6
11
12
18.5
18.5
19.5
23.2
18.5
3.5
3.5
13
3.5
15
7.3
17
CB4/3
CB4/3H
CB6/3H
CB16/3H
CB6/4H
13
15
17
23
28
25.5
20
23
39
6
36
41
48
25
6
6
6
6
6
6
18.5
19.5
23.2
16
18.5
8
7.3
13
17
15
3.5
3.5
3.5
3.5
94
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
EUROSTRIPS®
OVERVIEW
TERMINAL STRIPS
SCREW CLAMP CONNECTION TECHNOLOGY
• Quick and Efficient Wire-to-Wire connection solution • Safe, Gas-tight connection
• Modern Replacement for traditional Double-Row
Barrier Style Terminal Blocks
• Touch-proof design to eliminate shorts
• Available in 12 poles or precut to required number
of poles
• Reliable connection utilizing a precision
machined tubular screw clamp insert
• Accessories for convenient wire installation
and usage
• Easy to cut to length by using hacksaw
or utility knife
E211022
60998-2-1
SELECTION GUIDE
HE SERIES with wire protector
MATERIAL SPECIFICATIONS
Terminal Block Housing
• Polyamide PA66 Housing
• Self-extinguishing
• High mechanical strength
Polyamide 66 Specifications
Upper Temperature Limit: 125°C
Lower Temperature Limit: -30°C
Current Carrying Metal
Corrosion free material
Insert
• Insert: Tinned Brass
• Screw: Blue chromated steel
Flammability UL94:
V0
• Wire protector: Stainless Steel
Wire Protec
HE Series Flat Base 300V
page 96-97
HEH Series Standoff Feet 600V
HE42 Series Pluggable 300V, 600V
page 98-99
page 100-101
ATS SERIES with wire protector - Center Barrier
MATERIAL SPECIFICATIONS
Polyamide 66 Specifications
Upper Temperature Limit: 125°C
Lower Temperature Limit: -30°C
Terminal Block Housing
• Polyamide PA66 Housing
• Self-extinguishing
Current Carrying Metal
Corrosion free material
Insert
• Insert: Nickel-plated copper alloy
Flammability UL94:
V0
• High mechanical strength
• Screw: yellow chromated steel
• Wire protector: Stainless Steel
• Middle Barrier: Stainless Steel
Center
Barrie
Wire Pro
ATS Series Flat Base 300V
ATSF Series Standoff Feet 600V
page 103
page 102
ACCESSORIES
Jumpers, Separation Plates, Marking Pins, Imprinting
page 104-105
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
95
®
EUROSTRIPS
FLAT BASE PANEL MOUNT 300 V - WIRE PROTECTOR
TERMINAL STRIPS
HE1
HE4
HIGHLIGHTS
FEATURES
Dimensions & Weight
Pitch Spacing
• 300V up to 63A
8 mm
10 mm
• Cost effective reliable
wire-to-wire solution
• Easy to use double-row
terminal strips
Weight per piece (12 pole)
16.2 g
31.6 g
Technical Data/Ratings
Approvals
• Panel mount or free float
• Finger safe metal parts
• Wire protector
E211022
24-12 AWG
300 V
60998-2-1
1-2.5 mm2
400 V
E211022
24-10 AWG
300 V
60998-2-1
2.5-4 mm2
400 V
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
• easy to cut to required pole
configuration
20 A
6 A
30 A
10 A
• Pre cut version in stock
• Color: white
4.4lb-in
0.35Nm
7.0lb-in
0.4Nm
Insulation Material
Insert Material
Polyamide 66/6 V0
Tinned Brass
Polyamide 66/6 V0
Tinned Brass
APPLICATIONS
• HVAC
Terminal Screw Material
Blue Chromated Steel
Blue Chromated Steel
• Appliances
nstallation Instructions
Wire Stripping Length
• Equipment
5 mm
3.0 mm
M2.6
6 mm
3.6 mm
M3
• Power Distribution
• Junction Boxes
• Cost effective alternative
to barrier strips
Mounting Hole Diameter
Terminal Screw Size
Cat. No.
Length
Std. Pk.
Cat. No.
Length
Std. Pk.
Terminal Strips
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
HE1WPR/02
HE1WPR/03
HE1WPR/04
HE1WPR/05
HE1WPR/06
HE1WPR/07
HE1WPR/08
HE1WPR/09
HE1WPR/10
HE1WPR/11
HE1WPR/12
13.2 mm
21.2 mm
29.2 mm
37.2 mm
45.2 mm
53.2 mm
61.2 mm
69.2 mm
77.2 mm
85.2 mm
93.2 mm
100
100
100
100
50
50
50
50
50
50
50
HE4WPR/02
HE4WPR/03
HE4WPR/04
HE4WPR/05
HE4WPR/06
HE4WPR/07
HE4WPR/08
HE4WPR/09
HE4WPR/10
HE4WPR/11
HE4WPR/12
16.4 mm
26.4 mm
36.4 mm
46.4 mm
56.4 mm
66.4 mm
76.4 mm
86.4 mm
96.4 mm
106.4 mm
116.4 mm
100
100
100
100
50
50
50
50
50
50
50
Std. Pk.
Accessories
Cat. No.
Cat. No.
Std. Pk.
2 pole
3 pole
External Jumpers
HCL8-2
HCL8-3
HCL8-4
HCL8-12
100
100
100
25
HCL10-2
HCL10-3
HCL10-4
HCL10-12
100
100
100
25
4 pole
12 pole
Marking Plates
–
–
–
–
–
–
BS24E
BS24EM1-12
BS24EM13-24
25
25
25
Blank
No. 1-12
No. 13-24
HE1 DIMENSIONS
HE4 DIMENSIONS
8 mm
10 mm
M3
M2.6
5.2 mm
2.8 mm
Ø3 mm
Mounting Hole
3.5 mm
6.4 mm
Ø3.6 mm
Mounting Hole
6.5 mm
M2.6
M3
8.5 mm
Ø5 mm
Ø5.7 mm
10 mm
8 mm
L
Ø2.8 mm
Ø3.6
20 mm
16.2 mm
L
(All dimensions are shown in mm, to convert to inches please divide by 25.4)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
96
®
EUROSTRIPS
FLAT BASE PANEL MOUNT 300 V - WIRE PROTECTOR
TERMINAL STRIPS
HE6
HE10
HE16
Dimensions & Weight
Pitch Spacing
12 mm
15 mm
15 mm
Weight per piece (12 pole)
47.0 g
95.5 g
94.5 g
Technical Data/Ratings
Approvals
E211022
20-10 AWG
300 V
60998-2-1
4-6 mm2
400 V
E211022
18-8 AWG
300 V
60998-2-1
6-10 mm2
400 V
E211022
18-6 AWG
300 V
60998-2-1
10-16 mm2
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
400 V
40 A
16 A
50 A
25 A
63 A
35 A
7.0lb-in
0.55Nm
10.6lb-in
0.84Nm
17.7lb-in
1.4Nm
Insulation Material
Insert Material
Polyamide 66/6 V0
Tinned Brass
Polyamide 66/6 V0
Tinned Brass
Polyamide 66/6 V0
Tinned Brass
Terminal Screw Material
Blue Chromated Steel
Blue Chromated Steel
Blue Chromated Steel
Installation Instructions
Wire Stripping Length
7 mm
4.2 mm
M3.5
8.5 mm
4.5 mm
M4
8.5 mm
4.5 mm
M5
Mounting Hole Diameter
Terminal Screw Size
Cat. No.
Length
Std. Pk.
Cat. No.
Length
Std. Pk.
Cat. No.
Length
Std. Pk.
Terminal Strips
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
HE6WPR/02
HE6WPR/03
HE6WPR/04
HE6WPR/05
HE6WPR/06
HE6WPR/07
HE6WPR/08
HE6WPR/09
HE6WPR/10
HE6WPR/11
HE6WPR/12
19.8 mm
31.8 mm
43.8 mm
55.8 mm
67.8 mm
79.8 mm
91.8 mm
103.8 mm
115.8 mm
127.8 mm
139.8 mm
100
100
100
100
50
50
50
50
25
25
25
HE10WPR/02
HE10WPR/03
HE10WPR/04
HE10WPR/05
HE10WPR/06
HE10WPR/07
HE10WPR/08
HE10WPR/09
HE10WPR/10
HE10WPR/11
HE10WPR/12
24.2 mm
39.2 mm
54.2 mm
69.2 mm
84.2 mm
99.2 mm
114.2 mm
129.2 mm
144.2 mm
159.2 mm
174.2 mm
50
50
50
50
25
25
25
25
10
10
10
HE16WPR/02
HE16WPR/03
HE16WPR/04
HE16WPR/05
HE16WPR/06
HE16WPR/07
HE16WPR/08
HE16WPR/09
HE16WPR/10
HE16WPR/11
HE16WPR/12
24.2 mm
39.2 mm
54.2 mm
69.2 mm
84.2 mm
99.2 mm
114.2 mm
129.2 mm
144.2 mm
159.2 mm
174.2 mm
50
50
50
50
25
25
25
25
10
10
10
Std. Pk.
Accessories
Cat. No.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
2 pole
3 pole
External Jumpers
HCL12-2
HCL12-3
HCL12-4
HCL12-12
100
100
100
25
HCL15-2
HCL15-3
HCL15-4
HCL15-12
100
100
100
25
HCL15-2
HCL15-3
HCL15-4
HCL15-12
100
100
100
25
4 pole
12 pole
Marking Plates
BS60E
BS60EM1-12
BS60EM13-24
25
25
25
BS1016E
BS1016EM1-12
BS1016EM13-24
25
25
25
BS1016E
BS1016EM1-12
BS1016EM13-24
25
25
25
Blank
No. 1-12
No. 13-24
HE6 DIMENSIONS
HE10 DIMENSIONS
HE16 DIMENSIONS
12 mm
15 mm
15 mm
M5
M3.5
M4
5.7 mm
9.3 mm
Ø4.5
4.3 mm
5.7 mm
Ø4.2 mm
Ø4.5
M5
11.3 mm
Ø8.2
7.7 mm
9.3 mm
11.3 mm
25.1 mm
Ø8.2
M4
9.5 mm
M3.5
Ø6.3 mm
15 mm
25.1 mm
Ø5.6 mm
15 mm
L
22.6 mm
Ø5 mm
Ø4.1 mm
12 mm
L
L
(All dimensions are shown in mm, to convert to inches please divide by 25.4)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
97
®
EUROSTRIPS
STANDOFF FEET PANEL MOUNT 600 V - WIRE PROTECTOR
TERMINAL STRIPS
HE1H
HE4HN
HIGHLIGHTS
FEATURES
Dimensions & Weight
Pitch Spacing
• 600V up to 63A
8 mm
17.2 g
10 mm
33.0 g
• Cost effective reliable
wire-to-wire solution
• Easy to use double-row
terminal strips
Weight per piece (12 pole)
Technical Data/Ratings
Approvals
• Panel mount or free float
• Finger safe metal parts
• Wire protector
E211022
24-12 AWG
600 V
60998-2-1
1-2.5 mm2
500 V
E211022
24-10 AWG
600 V
60998-2-1
2.5-4 mm2
500 V
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
• easy to cut to required pole
configuration
20 A
6 A
30 A
10 A
• Pre cut version in stock
• Color: white
4.4lb-in
0.35Nm
7.0lb-in
0.4Nm
Insulation Material
Insert Material
Polyamide 66/6 V0
Tinned Brass
Polyamide 66/6 V0
Tinned Brass
APPLICATIONS
• HVAC
Screw Material
Blue Chromated Steel
Blue Chromated Steel
• Appliances
nstallation Instructions
Wire Stripping Length
• Equipment
5 mm
3.0 mm
M2.6
6 mm
3.6 mm
M3
• Power Distribution
• Junction Boxes
• Cost effective alternative
to barrier strips
Mounting Hole Diameter
Terminal Screw Size
Cat. No.
Length
Std. Pk.
Cat. No.
Length
Std. Pk.
Terminal Strips
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
HE1HWPR/02
HE1HWPR/03
HE1HWPR/04
HE1HWPR/05
HE1HWPR/06
HE1HWPR/07
HE1HWPR/08
HE1HWPR/09
HE1HWPR/10
HE1HWPR/11
HE1HWPR/12
13.2 mm
21.2 mm
29.2 mm
37.2 mm
45.2 mm
53.2 mm
61.2 mm
69.2 mm
77.2 mm
85.2 mm
93.2 mm
100
100
100
100
50
50
50
50
50
50
50
HE4HNWPR/02 16.4 mm
HE4HNWPR/03 26.4 mm
HE4HNWPR/04 36.4 mm
HE4HNWPR/05 46.4 mm
HE4HNWPR/06 56.4 mm
HE4HNWPR/07 66.4 mm
HE4HNWPR/08 76.4 mm
HE4HNWPR/09 86.4 mm
HE4HNWPR/10 96.4 mm
HE4HNWPR/11 106.4 mm
HE4HNWPR/12 116.4 mm
100
100
100
100
50
50
50
50
50
50
50
Std. Pk.
Accessories
Cat. No.
Cat. No.
Std. Pk.
2 pole
3 pole
External Jumpers
HCL8-2
HCL8-3
HCL8-4
HCL8-12
100
100
100
25
HCL10-2
HCL10-3
HCL10-4
HCL10-12
100
100
100
25
4 pole
12 pole
Marking Plates
–
–
–
–
–
–
BS24E
BS24EM1-12
BS24EM13-24
25
25
25
Blank
No. 1-12
No. 13-24
Isolation Partition
Mounting Pins
–
–
–
–
HEP4/6H
H4
5
50
HE1H DIMENSIONS
HE4HN DIMENSIONS
8 mm
10 mm
M2.6
M3
2.8 mm
Ø3 mm
Mounting Hole
3.5 mm
Ø3.6
Mounting Hole
6.4 mm
5.2 mm
6.5 mm
8.5 mm
M3
Ø5 mm
M2.6
Ø5.7 mm
14.0 mm
20 mm
10.1 mm
16.2 mm
Ø3.6
8 mm
10 mm
Ø2.8 mm
L
L
(All dimensions are shown in mm, to convert to inches please divide by 25.4)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
98
®
EUROSTRIPS
STANDOFF FEET PANEL MOUNT 600 V - WIRE PROTECTOR
TERMINAL STRIPS
HE6H
HE10H
HE16H
Dimensions & Weight
Pitch Spacing
12 mm
15 mm
15 mm
Weight per piece (12 pole)
49.1 g
98.7 g
99.3 g
Technical Data/Ratings
Approvals
E211022
60998-2-1
4-6 mm2
500 V
E211022
60998-2-1
6-10 mm2
500 V
E211022
18-6 AWG
600 V
60998-2-1
10-16 mm2
500 V
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
20-10 AWG
600 V
18-8 AWG
600 V
40 A
16 A
50 A
25 A
63 A
35 A
7.0lb-in
0.55Nm
7.6lb-in
0.84Nm
17.7lb-in
1.4Nm
Insulation Material
Insert Material
Polyamide 66/6 V0
Polyamide 66/6 V0
Polyamide 66/6 V0
Tinned Brass
Tinned Brass
Tinned Brass
Terminal Screw Material
Blue Chromated Steel
Blue Chromated Steel
Blue Chromated Steel
Installation Instructions
Wire Stripping Length
5 mm
4.2 mm
M3.5
6 mm
4.5 mm
M4
6 mm
4.5 mm
M5
Mounting Hole Diameter
Terminal Screw Size
Cat. No.
Length
Std. Pk.
Cat. No.
Length
Std. Pk.
Cat. No.
Length
Std. Pk.
Terminal Strips
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
HE6HWPR/02
HE6HWPR/03
HE6HWPR/04
HE6HWPR/05
HE6HWPR/06
HE6HWPR/07
HE6HWPR/08
HE6HWPR/09
HE6HWPR/10
HE6HWPR/11
HE6HWPR/12
19.8 mm
31.8 mm
43.8 mm
55.8 mm
67.8 mm
79.8 mm
91.8 mm
103.8 mm
115.8 mm
127.8 mm
139.8 mm
100
100
100
100
50
50
50
50
25
25
25
HE10HWPR/02 24.2 mm
HE10HWPR/03 39.2 mm
HE10HWPR/04 54.2 mm
HE10HWPR/05 69.2 mm
HE10HWPR/06 84.2 mm
HE10HWPR/07 99.2 mm
HE10HWPR/08 114.2 mm
HE10HWPR/09 129.2 mm
HE10HWPR/10 144.2 mm
HE10HWPR/11 159.2 mm
HE10HWPR/12 174.2 mm
40
40
40
40
20
20
20
10
10
10
10
HE16HWPR/02 24.2 mm
HE16HWPR/03 39.2 mm
HE16HWPR/04 54.2 mm
HE16HWPR/05 69.2 mm
HE16HWPR/06 84.2 mm
HE16HWPR/07 99.2 mm
HE16HWPR/08 114.2 mm
HE16HWPR/09 129.2 mm
HE16HWPR/10 144.2 mm
HE16HWPR/11 159.2 mm
HE16HWPR/12 174.2 mm
40
40
40
40
20
20
20
10
10
10
10
Std. Pk.
Accessories
Cat. No.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
2 pole
3 pole
External Jumpers
HCL12-2
HCL12-3
HCL12-4
HCL12-12
100
100
100
25
HCL15-2
HCL15-3
HCL15-4
HCL15-12
100
100
100
25
HCL15-2
HCL15-3
HCL15-4
HCL15-12
100
100
100
25
4 pole
12 pole
Marking Plates
BS60E
BS60EM1-12
BS60EM13-24
25
25
25
–
–
–
–
–
–
–
–
–
–
–
–
Blank
No. 1-12
No. 13-24
Isolation Partition
Mounting Pins
HEP4/6H
H6
5
–
–
–
–
–
–
–
–
50
HE6H DIMENSIONS
HE10H DIMENSIONS
HE16H DIMENSIONS
12 mm
15 mm
M4
M3.5
15 mm
M5
5.7 mm
Ø4.5
9.3 mm
Ø4.2
4.3 mm
5.7 mm
Ø4.5
7.7 mm
9.3 mm
11.3 mm
9.5 mm
11.3 mm
Ø8.2
M4
Ø8.2
M5
Ø6.3 mm
M3.5
15 mm
16 mm
25.1 mm
25.1 mm
Ø5.6 mm
15 mm
15.0 mm
22.6 mm
12 mm
Ø5 mm
Ø4.1
L
25.1 mm
L
L
(All dimensions are shown in mm, to convert to inches please divide by 25.4)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
99
®
EUROSTRIPS
PLUGGABLE PANEL MOUNT FLAT BASE - 300V
TERMINAL STRIPS
HE42ST
HE42BU
HIGHLIGHTS
FEATURES
Dimensions & Weight
Pitch Spacing
• Plug & Socket
10 mm
10 mm
• Cost effective reliable
wire-to-wire solution
• Easy to use double-row
terminal strips
Weight per piece (12 pole)
30.6 g
30.4 g
Technical Data/Ratings
Approvals
• Panel mount or free float
• Finger safe metal parts
• Wire protector
E211022
60998-2-1
2.5-4 mm2
400 V
E211022
60998-2-1
2.5-4 mm2
400 V
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
24-10 AWG
300 V
24-10 AWG
300 V
• easy to cut to required pole
configuration
20 A
10 A
20 A
10 A
• Pre cut version in stock
• 300V / 600V up to 63A
• Color: white
7.0lb-in
0.4Nm
7.0 lb-in
0.4Nm
Insulation Material
Insert Material
Polyamide 66/6 V0
Polyamide 66/6 V0
Tinned Brass
Tinned Brass
APPLICATIONS
• HVAC
Terminal Screw Material
Blue Chromated Steel
Blue Chromated Steel
Installation Instructions
Wire Stripping Length
• Appliances
7 mm
3.0 mm
M2.6
6 mm
3.6 mm
M3
• Equipment
Mounting Hole Diameter
Terminal Screw Size
• Power Distribution
• Junction Boxes
• Cost effective alternative
to barrier strips
Cat. No.
Length
Std. Pk.
Cat. No.
Length
Std. Pk.
Terminal Strips
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
HE42ST/02
HE42ST/03
HE42ST/04
HE42ST/05
HE42ST/06
HE42ST/07
HE42ST/08
HE42ST/09
HE42ST/10
HE42ST/11
HE42ST/12
16.4 mm
26.4 mm
36.4 mm
46.4 mm
56.4 mm
66.4 mm
76.4 mm
86.4 mm
96.4 mm
106.4 mm
116.4 mm
100
100
100
100
50
50
50
50
50
50
50
HE42BU/02
HE42BU/03
HE42BU/04
HE42BU/05
HE42BU/06
HE42BU/07
HE42BU/08
HE42BU/09
HE42BU/10
HE42BU/11
HE42BU/12
16.4 mm
26.4 mm
36.4 mm
46.4 mm
56.4 mm
66.4 mm
76.4 mm
86.4 mm
96.4 mm
106.4 mm
116.4 mm
100
100
100
100
50
50
50
50
50
50
50
Std. Pk.
Accessories
Cat. No.
Cat. No.
Std. Pk.
2 pole
3 pole
External Jumpers
HCL10-2
HCL10-3
HCL10-4
HCL10-12
100
100
100
25
HCL10-2
HCL10-3
HCL10-4
HCL10-12
100
100
100
25
4 pole
12 pole
Marking Plates
BS24E
BS24EM1-12
BS24EM13-24
25
25
25
BS24E
BS24EM1-12
BS24EM13-24
25
25
25
Blank
No. 1-12
No. 13-24
HE42ST DIMENSIONS
HE42BU DIMENSIONS
6.4 mm
[0.252 in]
3.65 mm
[0.144 in]
10 mm
[0.394 in]
10 mm
[0.394 in]
M3
M3
3.5 mm
[0.140 in]
Ø3.6
[Ø0.142 in]
Mounting Hole
Ø3 mm
[0.118 in]
2.6 mm
[0.102 in]
10 mm
[0.394 in]
6.4 mm
[0.252 in]
M3
Ø5.7 mm
[0.224 in]
5.7 mm
[0.224 in]
M3
3.2 mm
[0.126 in]
14.9 mm
[0.587 in]
7.9 mm
[0.311 in]
15 mm
[0.59 in]
7.75 mm
[0.305 in]
Ø3.6
[Ø0.142 in]
10 mm
[0.394 in]
20 mm
[0.787 in]
L
10 mm
[0.394 in]
Ø3.5 mm
[Ø0.138 in]
23 mm
[0.91 in]
L
(All dimensions are shown in mm, to convert to inches please divide by 25.4)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
100
®
EUROSTRIPS
PLUGGABLE PANEL MOUNT STANDOFF FEET - 600V
TERMINAL STRIPS
HE42SST
HE42SBU
Dimensions & Weight
Pitch Spacing
10 mm
10 mm
Weight per piece (12 pole)
30.6 g
30.4 g
Technical Data/Ratings
Approvals
E211022
60998-2-1
2.5-4 mm2
500 V
E211022
60998-2-1
2.5-4 mm2
500 V
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
24-10 AWG
600 V
24-10 AWG
600 V
20 A
10 A
20 A
10 A
7.0lb-in
0.4Nm
7.0lb-in
0.4Nm
Insulation Material
Insert Material
Polyamide 66/6 V0
Polyamide 66/6 V0
Tinned Brass
Tinned Brass
Terminal Screw Material
Blue Chromated Steel
Blue Chromated Steel
Installation Instructions
Wire Stripping Length
7 mm
3.0 mm
M3.5
6 mm
3.6 mm
M4
Mounting Hole Diameter
Terminal Screw Size
Cat. No.
Length
Std. Pk.
Cat. No.
Length
Std. Pk.
Terminal Strips
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
HE42SST/02
HE42SST/03
HE42SST/04
HE42SST/05
HE42SST/06
HE42SST/07
HE42SST/08
HE42SST/09
HE42SST/10
HE42SST/11
HE42SST/12
16.4 mm
26.4 mm
36.4 mm
46.4 mm
56.4 mm
66.4 mm
76.4 mm
86.4 mm
96.4 mm
106.4 mm
116.4 mm
100
100
100
100
50
50
50
50
50
50
50
HE42SBU/02
HE42SBU/03
HE42SBU/04
HE42SBU/05
HE42SBU/06
HE42SBU/07
HE42SBU/08
HE42SBU/09
HE42SBU/10
HE42SBU/11
HE42SBU/12
16.4 mm
26.4 mm
36.4 mm
46.4 mm
56.4 mm
66.4 mm
76.4 mm
86.4 mm
96.4 mm
106.4 mm
116.4 mm
100
100
100
100
50
50
50
50
50
50
50
Std. Pk.
Accessories
Cat. No.
Cat. No.
Std. Pk.
2 pole
3 pole
External Jumpers
HCL10-2
HCL10-3
HCL10-4
HCL10-12
100
100
100
25
HCL10-2
HCL10-3
HCL10-4
HCL10-12
100
100
100
25
4 pole
12 pole
Marking Plates
BS24E
BS24EM1-12
BS24EM13-24
25
25
25
BS24E
BS24EM1-12
BS24EM13-24
25
25
25
Blank
No. 1-12
No. 13-24
HE42SST DIMENSIONS
HE42SBU DIMENSIONS
6.4 mm
10 mm
[0.394 in
[0.252 in]
10 mm
[0.394 in]
3.65 mm
[0.144 in]
M3
M3
Ø3.6
[Ø0.142 in]
Mounting Hole
3.5 mm
[0.140 in]
6.4 mm
[0.252 in]
10 mm
[0.394 in]
M3
Ø3 mm
[0.118 in]
Ø5.7 mm
[0.224 in
2.6 mm
[0.102 in]
M3
5.7 mm
[0.224 in]
6.7 mm
[0.264 in]
19.1 mm
[0.752 in]
18.5 mm
[0.728 in]
12.1 mm
[0.477 in]
11.5 mm
[0.453 in]
10 mm
[0.394 in
14.0 mm
Ø3.6
23 mm
[0.91 in]
10 mm
[0.394 in]
Ø3.5 mm
[Ø0.138 in]
[0.551 in]
[Ø0.142 in]
20 mm
[0.787 in]
L
L
(All dimensions are shown in mm, to convert to inches please divide by 25.4)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
101
EUROSTRIPS®
TERMINAL STRIP 300V - CENTER BARRIER / WIRE PROTECTOR
TERMINAL STRIPS
ATS1.5
ATS2.5
ATS6
HIGHLIGHTS
FEATURES
Dimensions & Weight
Pitch Spacing
• Center Barrier /
8 mm
10 mm
12 mm
Wire Protector
• 300V/600V up to 63A
• Cost effective reliable
wire-to-wire solution
• Easy to use double-row
terminal strips
Weight per piece (12 pole)
22 g
34 g
44 g
Technical Data/Ratings
Approvals
E496554
60947-7-1
E496554
60947-7-1
E496554
60947-7-1
• Panel mount or free float
• Finger safe metal parts
• Wire protector
22-12 AWG 22-16 AWG 0.2-1.5 mm2 22-10 AWG 18-12 AWG 0.2-4 mm2
20-8 AWG 18-10 AWG 0.2-6 mm2
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
300 V
20 A
300 V
15 A
400 V
15 A
300 V
30 A
300 V
30 A
400 V
26 A
300 V
40 A
300 V
40 A
400 V
44 A
• easy to cut to required pole
configuration
• Pre cut version in stock
• Color: translucent white
4.4lb-in
0.5Nm
5.3lb-in
0.5Nm
7lb-in
0.5Nm
Insulation Material
Insert Material
Polyamide 6.6
Polyamide 6.6
Polyamide 6.6
Nickel Plated Copper Alloy
Zinc Yellow Chromated Steel
Nickel Plated Copper Alloy
Zinc Yellow Chromated Steel
Nickel Plated Copper Alloy
Zinc Yellow Chromated Steel
Terminal Screw Material
APPLICATIONS
• HVAC
• Appliances
• Equipment
• Power Distribution
• Junction Boxes
• Cost effective alternative
to barrier strips
Installation Instructions
Wire Stripping Length
5 mm (0.2 in.)
2.8 mm
6 mm (0.24 in.)
3.5 mm
7 mm (0.28 in.)
4.4 mm
Mounting Hole Diameter
Terminal Screw Size
M2.5
M3
M3.5
Terminal Blocks
Cat. No. Type
L (mm) Pk. Cat. No. Type
L (mm) Pk. Cat. No. Type
L (mm) Pk.
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
40.002 ATS1.5/2 13.6 mm 100
40.003 ATS1.5/3 21.5 mm 100
40.004 ATS1.5/4 29.5 mm 100
40.005 ATS1.5/5 37.4 mm 100
40.006 ATS1.5/6 45.4 mm 50
40.007 ATS1.5/7 53.3 mm 50
40.008 ATS1.5/8 61.3 mm 50
40.009 ATS1.5/9 69.2 mm 50
40.010 ATS1.5/10 77.2 mm 50
40.011 ATS1.5/11 85.1 mm 50
40.012 ATS1.5/12 93.0 mm 50
40.202 ATS1.5/2 17.0 mm 100 40.402 ATS1.5/2 20.0 mm 100
40.203 ATS1.5/3 27.0 mm 100 40.403 ATS1.5/3 32.0 mm 100
40.204 ATS1.5/4 37.0 mm 100 40.404 ATS1.5/4 44.0 mm 100
40.205 ATS1.5/5 47.0 mm 100 40.405 ATS1.5/5 56.0 mm 100
40.206 ATS1.5/6 57.0 mm 50
40.207 ATS1.5/7 67.0 mm 50
40.208 ATS1.5/8 77.0 mm 50
40.209 ATS1.5/9 87.0 mm 50
40.210 ATS1.5/10 97.0 mm 50
40.211 ATS1.5/11 107.0 mm 50
40.212 ATS1.5/12 117.0 mm 50
40.406 ATS1.5/6 68.0 mm 50
40.407 ATS1.5/7 80.0 mm 50
40.408 ATS1.5/8 92.0 mm 50
40.409 ATS1.5/9 104.0 mm 50
40.410 ATS1.5/10 116.0 mm 50
40.411 ATS1.5/11 128.0 mm 50
40.412 ATS1.5/12 140.0 mm 50
Center
Barrier
Wire
Protector
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
100
Accessories
External Jumpers
HCL8-2
HCL8-3
HCL8-4
HCL8-12
HCL10-2
HCL10-3
HCL10-4
HCL10-12
HCL12-2
HCL12-3
HCL12-4
HCL12-12
100
100
25
100
100
25
100
100
25
Marking Plates
–
–
–
–
–
–
BS24E
BS24EM1-12
BS24EM13-24
25
25
25
BS60E
BS60EM1-12
BS60EM13-24
25
25
25
ATS1.5 DIMENSIONS
ATS2.5 DIMENSIONS
ATS6 DIMENSIONS
10 mm
12.0 mm
8 mm
M3.5
M3
M2.5
3.5 mm
4.3 mm
5.6 mm
2.4 mm
Ø2.8 mm
Ø3.5 mm
Ø4.4 mm
M3.5
Mounting Hole
Mounting Hole
6.4 mm
7.6 mm
9.5 mm
7.5 mm
Ø6.8 mm
9.5 mm
M2.5
M3
Ø5.4 mm
Ø5.7 mm
23.0 mm
Ø4.2 mm
21.8 mm
12 mm
10 mm
8 mm
L
18.2 mm
Ø3 mm
Ø3.6 mm
L
L
(All dimensions are shown in mm, to convert to inches please divide by 25.4)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
102
EUROSTRIPS®
TERMINAL STRIP 600V - CENTER BARRIER / WIRE PROTECTOR
ATSF1.5
ATSF2.5
ATSF6
ATSF16
Dimensions & Weight
Pitch Spacing
8 mm
10 mm
12 mm
15 mm
Weight per piece (12 pole)
30 g
36 g
50 g
98 g
Technical Data/Ratings
Approvals
E496554
60947-7-1
E496554
60947-7-1
E496554
60947-7-1
E496554
60947-7-1
22-12 AWG 22-16 AWG 0.2-1.5 mm2 22-10 AWG 18-12 AWG 0.2-4 mm2
20-8 AWG 18-10 AWG 0.2-6 mm2
14-6 AWG 18-6 AWG 0.2-16 mm2
Wire Size (solid / stranded)
Voltage Rating
Current Rating
Torque
600 V
20 A
600 V
15 A
400 V
15 A
600 V
30 A
600 V
30 A
400 V
26 A
600 V
40 A
600 V
40 A
400 V
44 A
600 V
63 A
600 V
65 A
800 V
82 A
4.4lb-in
0.5Nm
5.3lb-in
0.6Nm
7lb-in
0.8Nm
20lb-in
2.25Nm
Insulation Material
Insert Material
Polyamide 6.6
Polyamide 6.6
Polyamide 6.6
Polyamide 6.6
Nickel Plated Copper Alloy
Zinc Yellow Chromated Steel
Nickel Plated Copper Alloy
Zinc Yellow Chromated Steel
Nickel Plated Copper Alloy
Zinc Yellow Chromated Steel
Nickel Plated Copper Alloy
Zinc Yellow Chromated Steel
Terminal Screw Material
Installation Instructions
Wire Stripping Length
5 mm (0.2 in.)
2.8 mm
6 mm (0.24 in.)
3.5 mm
7 mm (0.28 in.)
4.4 mm
8 mm (0.32 in.)
4.2 mm
Mounting Hole Diameter
Terminal Screw Size
M2.5
M3
M3.5
M5
Terminal Blocks
Cat. No. Type
L (mm) Pk. Cat. No. Type
L (mm) Pk. Cat. No. Type
L (mm) Pk. Cat. No. Type
L (mm) Pk.
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
40.102 ATSF1.5/2 13.6 100 40.302 ATSF2.5/2 17.0 100 40.502 ATSF6/2
40.103 ATSF1.5/3 21.5 100 40.303 ATSF2.5/3 27.0 100 40.503 ATSF6/3
40.104 ATSF1.5/4 29.5 100 40.304 ATSF2.5/4 37.0 100 40.504 ATSF6/4
40.105 ATSF1.5/5 37.4 100 40.305 ATSF2.5/5 47.0 100 40.505 ATSF6/5
20.0 100 40.702 ATSF16/2 25.0 40
32.0 100 40.703 ATSF16/3 40.0 40
44.0 100 40.704 ATSF16/4 55.0 40
56.0 100 40.705 ATSF16/5 70.5 40
40106 ATSF1.5/6 45.4 50
40107 ATSF1.5/7 53.3 50
40.108 ATSF1.5/8 61.3 50
40.109 ATSF1.5/9 69.2 50
40.110 ATSF1.5/10 77.2 50
40111 ATSF1.5/11 85.1 50
40112 ATSF1.5/12 93.0 50
40.306 ATSF2.5/6 57.0 50
40.307 ATSF2.5/7 67.0 50
40.308 ATSF2.5/8 77.0 50
40.309 ATSF2.5/9 87.0 50
40.310 ATSF2.5/10 97.0 50
40.311 ATSF2.5/11 197.0 50
40.312 ATSF2.5/12 117.0 50
40.506
40.507
40.508
ATSF6/6
ATSF6/7
ATSF6/8
68.0 50
80.0 50
92.0 50
40.706 ATSF16/6 86.0 20
40.707 ATSF16/7 101.0 20
40.708 ATSF16/8 116.0 20
40.709 ATSF16/9 131.0 10
40.710 ATSF16/10 146.0 10
40.711 ATSF16/11 161.0 10
40.712 ATSF16/12 176.0 10
40.509 ATSF6/9 104.0 50
40.510 ATSF6/10 116.0 25
40.511 ATSF6/11 128.0 25
40.512 ATSF6/12 140.0 25
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
100
Cat. No.
Std. Pk.
Accessories
External Jumpers
HCL8-2
HCL8-3
HCL8-4
HCL8-12
HCL10-2
HCL10-3
HCL10-4
HCL10-12
HCL12-2
HCL12-3
HCL12-4
HCL12-12
HCL15-2
HCL15-3
HCL15-4
HCL15-12
100
100
100
25
100
100
25
100
100
25
100
100
25
Isolation Partition
Mounting Pins
Marking Plates
–
–
–
–
HEP4/6H
H4
5
HEP4/6H
H6
5
–
–
–
–
50
50
–
–
–
–
–
–
BS24E
BS24EM1-12
BS24EM13-24
25
25
25
BS60E
BS60EM1-12
BS60EM13-24
25
25
25
BS1016E
BS1016EM1-12
BS1016EM13-24
25
25
25
ATSF1.5 DIMENSIONS
8 mm
ATSF2.5 DIMENSIONS
ATSF6 DIMENSIONS
12 mm
ATSF16 DIMENSIONS
15.1 mm
10 mm
M5
M3.5
M3
M2.5
5.4 mm
Ø4.2 mm
4.3 mm
Ø4.4 mm
3.5 mm
Ø3.5 mm
Mounting Hole
5.6 mm
2.4 mm
Ø2.8 mm
Mounting Hole
9.6 mm
7.6 mm
6.4 mm
M3.5 9.6 mm
11 mm
M2.6
M3
Ø8 mm
M5
Ø6.8 mm
7.5 mm
9.5 mm
Ø5.35 mm
Ø5.7 mm
15.1 mm
26.3 mm
15.8 mm
23.0 mm
12 mm
Ø6 mm
15.1 mm
Ø4.2 mm
14 mm
12 mm
Ø3.6 mm
10 mm
L
8 mm
Ø3 mm
L
22.3 mm
18.2 mm
L
L
(All dimensions are shown in mm, to convert to inches please divid(eAbllydi2m5e.4n)sions are shown in mm, to convert to inches please divide by 25.4)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
103
®
EUROSTRIPS
ACCESSORIES
TERMINAL STRIPS
HIGHLIGHTS
EXTERNAL JUMPERS
EXTERNALꢀ JUMPERS
• Bus potential between poles
on terminal Strips
• Eliminates Wire Jumpers
• Less wiring Time
echnical Information
External Jumper
HCL8
HCL10
HCL12
HCL15
• Material:
urostrip
HE1, HE1H
HE4, HE4HN
HE6, HE6H
HE10, HE16, HE10H, HE16H
15 mm (0.591 in.)
Copper Alloy nickel plated
(pins)
Pole Spacing
8 mm (0.315 in.)
10 mm (0.394 in.)
12 mm (0.472 in.)
Polyamide 66 (Insulation)
• Color: Black
rdering
nformation
Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. Cat. No. Length Std. Pk.
ISOLATIONꢀ PARTITION
• Separation between
adjectant poles of different
potentials
2 pole
3 pole
4 pole
12 pole
HCL8-2
HCL8-3
HCL8-4
12 mm 100
20 mm 100
28 mm 100
HCL10-2 15 mm
HCL10-3 25 mm
HCL10-4 35 mm
HCL10-12 115 mm
100
100
100
25
HCL12-2 18 mm
HCL12-3 30 mm
HCL12-4 42 mm
HCL12-12 138 mm
100
100
100
25
HCL15-2
HCL15-3
HCL15-4
20 mm 100
35 mm 100
50 mm 100
HCL8-12 92 mm
25
HCL15-12 170 mm 25
• Visual separation of poles
• Better circuit Identification
• Increasing wiring efficiency
• Material: Polyamide 66
• Color: black
HCL10
HCL8
HCL12
HCL15
3 mm
8 mm
3 mm
6 mm
6.5 mm
3 mm
6.5 mm
6 mm
9 mm
2 mm
4 mm
6 mm
5 mm
5 mm
6 mm
4 mm
L
L
L
L
ISOLATION PARTITIONS
For Eurostrip HE4HN, HE6H, TSF2.5, TSF6
Cat. No.
Dimensions
Std. Pk.
HEP4/16H
27 x 18.5 x 3.4 mm
5
(All dimensions are shown in mm, to convert to inches please divide by 25.4)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
104
®
EUROSTRIPS
ACCESSORIES
HIGHLIGHTS
MOUNTING PINS
MOUNTINGꢀ PINS
• Faster Panel Mounting
with snap-on mounting pins
• Installation
Technical Information
Mounting Pins
H4
H6
1) Insert Pin through
drilled hole
Eurostrip Type
Panel Thickness
Drill Hole Size
HE4HN
HE6H
0.5-1.5 mm
Ø4.2 mm
0.8-1.8 mm
Ø5.2mm
2) Position Eurostrip on
mounting pin
3) Snap Eurostrip onto
Mounting Pins
Cat. No.
Std. Pk. Cat. No.
Std. Pk.
Ordering Information
H4
50
H6
50
• Use 2 or more pins per
Eurostrip
• Material: Polycarbonate
MARKINGꢀ PLATES
• Install Mounting Plate
under or on top of Eurostrip
• Easy identification of
individual pole positions
for more wiring efficiency
• Less installation time
• Blank marking plates for
hand-marking
21 mm
24 mm
12.6 mm
14.7 mm
Ø 4.2 mm
Ø 5.2 mm
8.5 mm
11 mm
• Imprinted Marking Plates
(No. 1-12, 13-24)
MARKING PLATES
• Material: PVC
• Color: white with black imprint
Imprinting
• Mark individual pole positions
• Marking saves installation
Time
Dimensions & Weight
Eurostrip Type
• Marking on turret location
• Consecutive, identical or
custom imprints
HE4, HE4HN
HE6, HE6H
HE10, HE10H, HE16, HE16H
• Specify imprinting in part#
• Imprint: black ink,
rub-resistant
Ordering Information
Cat. No.
BS24E
Std. Pk. Cat. No.
Std. Pk. Cat. No.
Std. Pk.
Blank
1-12
13-24
25
25
25
BS60E
25
25
25
BS1016E
BS1016EM1-12
BS1016EM13-24
25
25
25
BS24EM1-12
BS24EM13-24
BS60EM1-12
BS60EM13-24
• 500pcs MOQ
IMPRINTING
Imprint Example
Order Examples
Ordering Information
Cat. No.
Std. Pk.
Consecutive 1-6
Consecutive 8-1
Identical
HE10HWPR/06/1-6
HE1WPR/08/8-1
HE6WPR/12/1
500
500
500
HE10HWPR/06/1-6
For custom imprints please contact Altech.
(All dimensions are shown in mm, to convert to inches please divide by 25.4)
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
105
ACCESSORIES
DIN RAIL
DIN RAIL & MOUNTING
DIN35 x 7.5
DIN35 x 15
HIGHLIGHTS
FEATURES
• Altech DIN Rails comply with
DIN EN60715, EN50022,
EN50035, EN50045
standards
35 mm x
7.5 mm deep
35 mm x
15 mm deep
• Easy mounting of terminal
blocks, power supplies and
other control components
and devices into panel
• Space saving
Zinc Plated Steel
Zinc Plated Steel
Type
Cat. No.
Length Std. Pk.
Type
Cat. No.
Length Std. Pk.
Perforated
2511120
2m
1m
2m
1m
20
20
20
20
Perforated
CA701-15/S-2M 2m
10
10
10
10
2511120/1M
CA701-15/S
1m
2m
1m
• Reduces labor
Unperforated 2511110
2511110/1M
Unperforated CA701-15-2M
CA701-15
• 35mm, 32mm and 15mm
versions
• 1m and 2m standard length
• Custom length available
• Perforated, unperforated
Stainless Steel
Type
Cat. No.
Length Std. Pk.
Perforated
2511125
2m
1m
2m
1m
20
20
20
20
MATERIAL
• Zinc-plated steel
• 35x7.5mm
• 35x15mm
• 32mm
• 15mm
• Aluminum
• 35x7.5mm
• Stainless Steel
(Type AISI 304)
• 35x7.5mm
2511125/1M
Unperforated 2511115
2511115/1M
Aluminum
Type
Cat. No.
Length Std. Pk.
Perforated
2511121
2m
1m
2m
1m
20
20
20
20
2511121/1M
2511111
Unperforated
2511111/1M
Dimensions
Preforated Steel and Stainless
Preforated Steel
18
18
Preforated Aluminum
Unpreforated Steel
25.4
12.7
4.6
Unpreforated
106
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
ACCESSORIES
DIN RAIL
DIN RAIL & MOUNTING
DIN32
DIN15
32 mm x
15 mm x
15 mm deep
5.5 mm deep
Zinc Plated Steel
Zinc Plated Steel
Type
Cat. No.
Length Std. Pk.
Type
Cat. No.
Length Std. Pk.
Perforated
2511160
2m
1m
2m
1m
10
20
10
20
Perforated
CA601/S
1m
50
2511160/1M
Unperforated 2511150
2511150/1M
Dimensions
Preforated Steel
Preforated Steel
18
Unpreforated Steel
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
107
ACCESSORIES
MOUNTING ACCESSORIES
DIN RAIL & MOUNTING
SUPPORT BRACKETS
HIGHLIGHTS
CA603
TSTW
M6
Ø7mm (.28in)
SUPPORTꢀ BRACKETS
• Elevate DIN Rail away
from panel
M6
18mm
(.71in)
H
48mm
(1.89in)
• Easier mounting of
components
Ø6mm
(.24 in.)
Slot 6x15mm
(.24x.59 in.)
• Suitable for all mounting rails
• Increase wiring access
• 45° version for improved
visibility
52mm(2.05 in.
18mm(.71in.)
60mm (2.36in)
74mm (2.91in)
7
4mm(2.98 in.)
)
• Straight brackets available
in 3 heights:
Cat. No.
Std. Pk.
25
Cat. No.
CA703
CA803
CA903
Height
1 in.
Std. Pk.
25
• 1”
CA603
• 2”
2 in.
25
• 3”
3 in.
25
MOUNTING
• Brackets mount with 2
screws to any panel or flat
surface
• Tapped center hole for DIN
Rail mounting
UNIVERSAL DIN CLIPS
D35CLIP
CMTB35
CA902
Ø 4.3 x 4
18
MATERIAL
• Zinc-plated yellow
chromated Steel
25.4
14.5
Ø 5.5 x 2
58
UNIVERSALꢀ DIN CLIPS
• Clips on to any 35mm/32mm
DIN Rail
• Flexible mounting solution
• Mount any component on
32mm/35mm DIN Rail
• Various mounting hole
solutions
• Material: zinc-plated steel,
Polyamide 66
Cat. No.
Mounting Hole Std. Pk. Cat. No. Mounting Hole Std. Pk. Cat. No.
Std. Pk.
100
D35CLIP-M4
D35CLIP-M5
M4
M5
100
100
CMTB35
2x4.4 mm
2x5.5 mm
50
CA902
SPACER
CASP
CDL4U SPACER
SPACER
• Increases creepage and
clearance distance between
terminal blocks
• Segregate different groups
of terminal blocks
Cat. No.
Dimensions Std. Pk.
29 x 43 x 8 mm 50
Cat. No.
Dimensions Std. Pk.
WARNINGꢀ LABELS
• Mounted on top of terminal
block for visual identification
• Make entire terminal block
assembly shock-proof
CASP
CDL4USP 54 x 55.5 x 6 mm
50
WARNING LABELS
Cat. No. Terminal Blocks
Std. Pk.
Pack Strips Tags
WLX2.5 CX2.5 Series, CXDL2.5, CXK2.5, CXM2.5
1
1
1
1
1
1
20
20
20
20
20
20
100
100
100
100
100
100
WLX4
WLX6
WLX10
SWL4
CX4 Series, CXF Series, CXK4
CX6 Series, CXDB Series
CX10 Series
CTS4U-N, CDB4, CMDB4
SWL10 CTS6U, CDB6U, CMDB6
108
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
ACCESSORIES
END STOPS
END STOPS
Selection Table
DIN Rail Type
HIGHLIGHTS
CA102 CA202 CA702 CA802 CA103 CA602 CA302 CA402 CA502
MOUNTINGꢀ PINS
• End Stops prevent Ter-
minal Blocks and other
DIN Rail components
from moving on the rail
• Versions for
¸
¸
¸
¸
¸
¸
¸
¸
¸
¸
¸
¸
¸
35x7.5mm DIN Rail
35x15mm DIN Rail
32mm DIN Rail
15mm DIN Rail
¸
¸
¸
• 35x7.5mm Rail
• 35x15mm Rail
• 32mm Rail
POLYAMIDE 66
• 15mm Rail
• Heavy Duty End stop
CA102, CA202
CA702
CA802
CA202
• Screwless End Stop
CA103 (snap on)
• Material:
• Polyamide
• Steel
Heavy Duty End Stop
Cat. No.
CA702
Dimensions
34 x 44 x 9mm
Std. Pk. Cat. No.
50 CA802
Dimensions
32 x 45 x 8mm
Std. Pk. Cat. No.
Dimensions
Std. Pk.
50
CA202 44.5 x 50 x 9.5mm
50
CA102
CA103
CA602
Screwless Snap-On
Cat. No.
CA102
Dimensions
46 x 50 x 9mm
Std. Pk. Cat. No.
50 CA103
Dimensions
41 x 35 x 6mm
Std. Pk. Cat. No.
50 CA602
Dimensions
20 x 28 x 8mm
Std. Pk.
50
STEEL
CA302
CA402
CA502
Cat. No.
CA302 27 x 39.5 x 16mm
Dimensions
Std. Pk. Cat. No.
50
Dimensions
CA402 27 x 39.5 x 16mm
Std. Pk. Cat. No.
50
Dimensions
CA502 25 x 22.5 x 11.5mm
Std. Pk.
50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
109
ACCESSORIES
GROUP MARKERS
MARKING
HIGHLIGHTS
DIN RAIL MOUNT
GMH6
GMH7
FEATURES
• Group identification
• Holders fit standard MT8
marking tags
• GMH6, GMH7 mounted
directly on DIN Rail
• GMH1, GMH2, GMH3,
GMH4, GMH5, GMH8
mounted on End Stops
• MT1G, MT2G, can be
used with all these holders
or can be directly
mounted on all end stops
• Material: Polyamide 66
Cat. No.
GMH6
Dimensions
46.5 x 44.5 x 9.5mm
Std. Pk. Cat. No.
Dimensions
Std. Pk.
50
GMH7 46.5 x 44.5 x 19.5mm
50
MOUNT ON END STOP
GMH1
GMH4
GMH5
Suitable for
CA602
Suitable for
CA802
Suitable for
CA702
Cat. No.
Dimensions
Std. Pk. Cat. No.
Dimensions
Std. Pk. Cat. No.
Dimensions
Std. Pk.
GMH1
15.8 x 14.6 x 8mm
100
GMH4
16.2 x 14 x 8mm
100
GMH5
13.7 x 14 x 8mm
100
GMH2 / GMH3
GMH8 / GMH8N
MTG1 / MTG2
Suitable for
CA702 (GMH2)
CA802 (GMH3)
Suitable for
CA103
Mountable
on all End Clamps
Cat. No.
GMH2
GMH3
Dimensions
23.2 x 14 x 8mm
23 x 14 x 8mm
Std. Pk.
100
100
Cat. No.
GMH8 44.65 x 31.10 x 10mm
GMH8N 44.65 x 31.10 x 6mm
Dimensions
Std. Pk. Cat. No.
Dimensions
4.3 x 34 x 17.8mm
4.3 x 34 x 8mm
Std. Pk.
50
100
MTG1
100
MTG2
50
TM5
Suitable for
CXDL Series
Cat. No.
Dimensions
Std. Pk.
TM5
38 x 17 x 5mm
50
110
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
ACCESSORIES
MARKING TAGS
MARKING
• Cost Effective MT marking system for quick and • Blank Marking Tags for customer marking
accurate identification
• Push-On Tags fit all Altech DIN Rail mount
terminal blocks
• Order with horizontal/ vertical imprint
• Standard imprints with consecutive or identical
numbers/ characters
• Inserted individually or as strips of 10
• Quick and easy marking
• Custom imprint with short lead time
• Supplied in packs of 100 tags/ 10 strips
BLANK MARKING TAGS
Cat No./
Type
Standard Packs
Pack Strips Tags
Dimensions
H
W
MT2
MT3
MT4
MT5
MT6
MT8
MT9
MT10
MT12
MT16
MT2G
MT2B4
Continuous Tags
MT6F
MT9F
1
1
1
1
1
1
1
1
1
1
1
1
10
20
10
10
10
10
10
20
20
20
10
10
100
100
100
100
100
100
100
100
100
100
100
100
4.9mm
5.0mm
5.0mm
9.5mm
9.5mm
10.5mm
10.3mm
10.4mm
10.4mm
10.5mm
5.0mm
5.8mm
5.8mm
10.0mm
4.8mm
4.5mm
5.6mm
7.5mm
8.7mm
9.5mm
11.4mm
15.4mm
5.0mm
9.1mm
W
H
Blank Marking Tag
Horizontal Imprint
Vertical Imprint
1
1
10
10
10
10
9.5mm
10.3mm
60.0mm
90.0mm
HOW TO ORDER IMPRINTED MARKING TAGS
IMPRINT EXAMPLES FOR MT6
HORIZONTAL
VERTICAL
Imprint
Imprint
1
2
3
4
5
6
7
8
Cat. No.
MT6/H-1
Imprint
131-140
Cat. No.
Imprint
1
2
3
4
5
6
7
Cat. No.
MT6/V-1
MT6/V-2
MT6/V-3
MT6/V-4
MT6/V-5
MT6/V-6
MT6/V-7
MT6/V-8
Cat. No.
MT6/V-131-140
MT6/V-141-150
MT6/V-151-160
MT6/V-161-170
MT6/V-171-180
MT6/V-181-190
MT6/V-191-200
MT6/V-1-100
MT6/V-1-50
MT6/V-A
MT6/H-131-140
MT6/H-141-150
MT6/H-151-160
MT6/H-161-170
MT6/H-171-180
MT6/H-181-190
MT6/H-191-200
MT6/H-1-100
MT6/H-1-50
MT6/H-A
131-140
141-150
151-160
161-170
171-180
181-190
191-200
1-100
MT6/H-2
141-150
MT6/H-3
151-160
MT6/H-4
161-170
MT6/H-5
171-180
MT6/H-6
181-190
MT6/H-7
191-200
MT6/H-8
1-100
8
9
10
9
10
MT6/H-9
1-50
MT6/V-9
1-50
MT6/H-10
A
MT6/V-10
A
1-10
11-20
21-30
31-40
41-50
51-60
61-70
71-80
81-90
91-100
101-110
111-120
121-130
MT6/H-1-10
MT6/H-11-20
MT6/H-21-30
MT6/H-31-40
MT6/H-41-50
MT6/H-51-60
MT6/H-61-70
MT6/H-71-80
MT6/H-81-90
MT6/H-91-100
MT6/H-101-110
MT6/H-111-120
MT6/H-121-130
B
C
L1
L2
L3
N
R
S
MT6/H-B
MT6/H-C
MT6/H-L1
MT6/H-L2
MT6/H-L3
MT6/H-N
MT6/H-R
MT6/H-S
MT6/H-X
MT6/H-Y
MT6/H-Y
MT6/H-GRND
1-10
11-20
21-30
31-40
41-50
51-60
61-70
71-80
81-90
91-100
101-110
111-120
121-130
MT6/V-1-10
MT6/V-11-20
MT6/V-21-30
MT6/V-31-40
MT6/V-41-50
MT6/V-51-60
MT6/V-61-70
MT6/V-71-80
MT6/V-81-90
MT6/V-91-100
MT6/V-101-110
MT6/V-111-120
MT6/V-121-130
B
C
L1
L2
L3
N
R
S
MT6/V-B
MT6/V-C
MT6/V-L1
MT6/V-L2
MT6/V-L3
MT6/V-N
MT6/V-R
MT6/V-S
MT6/V-X
MT6/V-Y
MT6/V-Y
MT6/V-GRND
X
Y
Z
X
Y
Z
Ground Symbol
Ground Symbol
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
111
ACCESSORIES
MARKING SYSTEMS
PLOTTERS & ENGRAVERS
112
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
ACCESSORIES
MARKING SYSTEMS
PLOTTERS
PLOTTERS
The Altech VPꢀSeries base unit is an auxiliary plotter that has to be connected to a PC via a USB connection. It is a high
speed plotting device and enables plotting of different markers in one setting. The base unit is controlled through a PC
with the help of Vario Sign software (sold separately). Manual available in English and Spanish.
The special design of the VP Series enables it to hold different markers from various manufacturers at the same time.
It is also possible to write on relatively large markers with a maximum height of 10.5 mm.
PLOTTER VP 600 BASIC
PLOTTER VP 600 A3
Ordering Information
Ordering Information
Cat No. 34000082
Cat No. 34000080
• Professionally marking of connectors, wires, cables,
equipment, cable ties, shrink tubing, labels and signs
of different sizes and materials, as well as customer-
specific items.
• Basic features of plotter VP 600 Basic plus:
• Integrated and automated pen station. Holds 4 different
pens at the same time, for fast and frequently changing
applications.
• Manual insertion of plotter pen
• Built-in pen priming function
• Auto calibration
• Automatic recognition system for marking fixture /
plates ensures faster and easier handing of frequently
changing marking applications.
• Universal Power Supply 100-240V AC
• Control language HPGL
• Universal marking software (VarioSign) sold separately
• Marking area 273 x 305 mm
• Wide marking area 422 x 305 mm
• Size: 27.2 x 18.9 x 6.1 in. (690 x 480 x 155 mm)
• Weight: 18.3 lbs.
• Size: 18.5 x 18.9 x 6.1 in. (470 x 480 x 155 mm)
• Weight: 13.9 lbs.
ACCESSORIES
PLOTTER PENS
ALTECH FIXTURES
SOFTWARE
VARIOSIGN
Cat. No.
Description
Tip Size
0.18 mm
0.25 mm
0.35 mm
Cat. No.
Description
Cat. No.
Description
35003018 Etching Plotter Pen (red)
35003025 Etching Plotter Pen (white)
35003035 Etching Plotter Pen (yellow)
34902191
34902081
34902001
34902057
34902080
MT2G
34000022
Variosign Software
MT2, MT3, MT4, MT2B4
MT5, MT6, MT8, MT10, MT12, MT16
MT9
35003118 Non-Etching Plotter Pen (red)
0.18 mm
MTG1, MTG2
35003125 Non-Etching Plotter Pen (white) 0.25 mm
35003135 Non-Etching Plotter Pen (yellow) 0.35 mm
* Fixtures for other Terminal Block Manufactures are available,
please contact Altech for additional information.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
113
FERRULES
INTRODUCTION
Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal
blocks, circuit breakers or other control devices.
Using ferrules offers several advantages:
ELIMINATE CROSS SHORTING
caused by unraveled stray wire strands.
IMPROVE TERMINAL CONNECTIONS
and reduce resistance by providing a solid surface
at the point of connection.
REDUCE INSTALLATION TIME
by eliminating the need to dress loose wire strands
and facilitating wire insertion into the terminal clamp.
PREVENT CONDUCTOR BREAKAGE
due to bending, wire stress or vibration.
114
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
FERRULES
Recommended Installation Procedure
Cutting and stripping the wire
The wire should be cut as squarely and evenly as possible, taking care
to avoid angular cuts or damage to the conductor. The strip length of
the insulation will depend on the barrel length of the ferrule and the out-
side diameter of the wire.
<.5 mm
Ideally the wire insulation should be stripped to a length that allows the
conductor end to reach flush to the tip of the ferrule, when inserted. The
end of the conductor should not extend more than .5mm past the tip of
the ferrule.
After the insulation is stripped, the strands of the conductor should be
dressed by slightly twisting them to insure that any stray strands are
consolidated.
The wire can then be inserted into the ferrule. The wire should be pushed
in so that the insulation edge is fully covered by the plastic collar. The
conductor should completely fill the metal tube and can extend up to
.5mm past the tip.
The ferrule and wire should be crimped with an appropriately sized
ratcheted crimper. The ferrule should be inserted into the crimper die
set and positioned so that only the metal tube is crimped. The crimping
tool should be cycled completely to insure proper application.
The finished installation should then be checked for any obvious flaws
in processing. An occasional pull test should be preformed to check
that the crimp tool is functioning properly.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
115
FERRULES
UL RECOGNIZED SINGLE INSULATED FERRULES
Standard Packaging
L2
Dimensions (mm)
AWG
mm2
Barrel Length
(mm)
Industry Standard
DIN Standard
L1
L2
D1
S1
D2
S2
Std.
HIGHLIGHTS
color
grey
Cat. No.
color
Cat. No.
Pack
26
26
24
24
24
22
22
22
20
20
20
20
18
18
18
18
18
18
18
18
16
16
16
16
16
14
14
14
14
14
14
12
12
12
12
10
10
8
0.14
0.14
0.25
0.25
0.25
0.34
0.34
0.34
0.5
0.5
0.5
0.5
0.75
0.75
0.75
0.75
1
6
8
6
8
12
6
8
12
6
FII2606
FII2608
FII2406
FII2408
FII2412
FII2206
FII2208
FII2212
FII2006
FII2008
FII2010
FII2012
FII1806W
FII1808W
FII1810W
FII1812W
FII1806Y
FII1808Y
FII1810Y
FII1812Y
FII1606
FII1608
FII1610
FII1612
FII1618
FII1408Y
blue
10
12
10
12
16
10
12
16
12
14
16
18
12
14
16
18
12
14
16
18
12
14
16
18
24
15
13
15
17
19
25
16
18
20
26
20
26
22
28
22
28
30
32
36
30
32
39
36
41
46
6
8
6
8
12
6
8
12
6
8
0.6
0.6
0.85
0.85
0.85
0.85
0.85
0.85
1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
1.5
1.5
1.8
1.8
1.8
2
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.3
0.25
0.25
0.25
0.25
0.25
0.3
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.4
0.4
0.4
0.4
0.4
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
100
100
100
100
100
100
100
50
grey
light blue
light blue
light blue
turquoise
turquoise
turquoise
orange
orange
orange
orange
white
white
white
white
yellow
yellow
yellow
yellow
red
FEATURES
Ferrules insure reliable
electrical connections when
terminating stranded flexi-
ble wire in terminal blocks,
circuit breakers or other
control devices. Insulated
ferrules prevent conductor
breakage due to bending,
wire stress or vibration
while facilitating wire inser-
tion into the terminal clamp.
2
2
white
white
white
white
grey
grey
grey
grey
red
FID2006
FID2008
FID2010
FID2012
FID1806GR
FID1808GR
FID1810GR
FID1812GR
FID1806R
FID1808R
FID1810R
FID1812R
FID1606
2.6
2.6
2.6
2.6
2.8
2.8
2.8
2.8
3
8
1
1
1
10
12
6
10
12
6
1.2
1.2
1.2
1.2
1.4
1.4
1.4
1.4
1.7
1.7
1.7
1.7
1.7
2.05
2.2
2.2
2.2
2.2
2.2
2.8
2.8
2.8
2.8
3.5
3.5
4.5
4.5
5.8
5.8
7.3
7.3
7.3
8.3
8.3
8.3
10.3
10.3
10.3
8
8
10
12
6
10
12
6
red
red
red
1
1
1
8
8
3
3
3
10
12
6
10
12
6
black
black
black
black
black
1.5
1.5
1.5
1.5
1.5
2.08
2.5
2.5
2.5
2.5
2.5
4
4
4
4
6
6
10
10
16
3.5
3.5
3.5
3.5
3.5
4.2
4.2
4.2
4.2
4.2
4.2
4.8
4.8
4.8
4.8
6.3
6.3
7.6
7.6
8.8
8.8
11.2
11.2
11.2
12.7
12.7
12.7
15
Altech’s UL insulated fer-
rules are color coded by
conductor size for conven-
ient identification.
red
red
red
red
8
FID1608
FID1610
FID1612
FID1618
8
10
12
18
8
6
8
10
12
18
8
10
12
18
12
18
12
18
12
18
16
18
22
16
18
25
20
25
30
10
12
18
8
6
8
10
12
18
8
10
12
18
12
18
12
18
12
18
16
18
22
16
18
25
20
25
30
yellow
FID1406
FID1408
FID1410
FID1412
FID1418
FID1208
FID1210
FID1212
blue
blue
blue
blue
grey
grey
grey
grey
To ensure efficient ferrule
crimping, always select the
smallest ferrule diameter
that fits the wire and use
only professional crimping
tools.
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.3
FID1218
black
black
ivory
yellow
FII1012
FII1018
FII0812
FII0818
FII0612
FII0618
FII0416
FII0418
FII0422
FII0216
FII0218
FII0225
FII0120
FII0125
FII0130
FID1012
FID1018
FID0812
FID0818
FID0612
FID0618
FID0416
FID0418
FID0422
FID0216
FID0218
FID0225
FID0120
FID0125
FID0130
yellow
red
In order meet the UL re-
quirements only matching
UL crimpers should be use.
ivory
red
8
6
6
4
4
4
2
2
2
1
1
1
green
green
brown
brown
brown
beige
beige
beige
olive
blue
blue
yellow
yellow
yellow
red
16
25
25
25
35
35
35
50
50
50
50
50
50
50
50
50
0.4
0.4
0.4
0.5
0.5
0.5
red
red
blue
blue
blue
olive
olive
50
50
0.3
15
0.3
15
Smaller Package Sizes
grey
grey
26
26
24
24
24
22
22
22
20
20
20
20
18
18
18
18
18
18
18
18
16
16
16
16
14
14
14
14
14
12
12
10
8
0.14
0.14
0.25
0.25
0.25
0.34
0.34
0.34
0.5
0.5
0.5
0.5
0.75
0.75
0.75
0.75
1
6
8
6
8
12
6
8
12
6
FII2606M
FII2608M
FII2406M
FII2408M
FII2412M
FII2206M
FII2208M
FII2212M
FII2006M
FII2008M
FII2010M
FII2012M
FII1806WM
FII1808WM
FII1810WM
FII1812WM
FII1806YM
FII1808YM
FII1810YM
FII1812YM
FII1606M
FII1608M
FII1610M
FII1612M
FII1408YM
blue
10
12
10
12
16
10
12
16
12
14
16
18
12
14
16
18
12
14
16
18
12
14
16
18
15
13
15
17
19
16
18
20
22
6
8
6
8
12
6
8
12
6
0.6
0.6
0.85
0.85
0.85
0.85
0.85
0.85
1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
1.5
1.5
1.8
1.8
1.8
2
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.3
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
light blue
light blue
light blue
turquoise
turquoise
turquoise
orange
orange
orange
orange
white
white
white
white
yellow
yellow
yellow
yellow
red
D2
S2
2
2
white
white
white
white
grey
grey
grey
grey
red
red
red
red
black
black
black
black
FID2006M
FID2008M
FID2010M
FID2012M
FID1806GRM
FID1808GRM
FID1810GRM
FID1812GRM
FID1806RM
FID1808RM
FID1810RM
FID1812RM
FID1606M
2.6
2.6
2.6
2.6
2.8
2.8
2.8
2.8
3
8
8
1
1
1
10
12
6
10
12
6
1.2
1.2
1.2
1.2
1.4
1.4
1.4
1.4
1.7
1.7
1.7
1.7
2.05
2.2
2.2
2.2
2.2
2.8
2.8
3.5
4.5
L1
8
8
10
12
6
10
12
6
L2
1
1
1
8
8
3
3
3
10
12
6
10
12
6
1.5
1.5
1.5
1.5
2.08
2.5
2.5
2.5
2.5
4
3.5
3.5
3.5
3.5
4.2
4.2
4.2
4.2
4.8
4.8
4.8
6.3
7.6
S1
D1
red
red
red
yellow
8
FID1608M
FID1610M
FID1612M
8
10
12
8
6
8
10
12
8
10
12
12
10
12
8
6
8
10
12
8
10
12
12
FID1406M
FID1408M
blue
blue
FID1410M
FID1412M
FID1208M
FID1210M
yellow
blue
grey
grey
4
6
10
0.2
0.2
0.2
0.3
0.3
0.4
50
20
20
black
ivory
FII1012M
FII0812M
FID1012M
FID0812M
red
116
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
FERRULES
UL RECOGNIZED TWIN INSULATED FERRULES
Standard Packaging
L2
Dimensions (mm)
mm2
Barrel Length Industry Standard
DIN Standard
L1
L2
D1
S1
S2
A
B
Std.
Pack
HIGHLIGHTS
AWG
(mm)
color
Cat. No.
color
Cat. No.
turquoise
orange
orange
orange
white
white
white
white
yellow
yellow
yellow
yellow
red
2 x 22
2 x 20
2 x 20
2 x 20
2 x 18
2 x 18
2 x 18
2 x 18
2 x 18
2 x 18
2 x 18
2 x 18
2 x 16
2 x 16
2 x 16
2 x 14
2 x 14
2 x 14
2 x 12
2 x 12
2 x 10
2 x 10
2 x 8
2 x 0.34
2 x 0.5
2 x 0.5
2 x 0.5
2 x 0.75
2 x 0.75
2 x 0.75
2 x 0.75
2 x 1
2 x 1
2 x 1
2 x 1
2 x 1.5
2 x 1.5
2 x 1.5
2 x 2.5
2 x 2.5
2 x 2.5
2 x 4
8
8
FTI2208
FTI2008
FTI2010
FTI2012
FTI1808W
FTI1810
FTI1812W
FTI1818W
FTI1808Y
FTI1812Y
FTI1814
FTI1818Y
FTI1608
FTI1612
FTI1618
blue
blue
blue
grey
grey
FTI1012
FTI1018
FTI0812
FTI0818
FTI0616
FTI0625
15
14
16
18
14
16
18
24
15
19
21
25
16
20
26
19
21
27
22
28
23
29
24
30
29
38
8
8
1.2
1.4
1.4
1.4
1.7
1.7
1.7
1.7
2
0.15 0.25
3.5
5
5
2
3
3
3
3
3
3
3
3.2
3.2
3.2
3.2
3.6
3.6
3.6
4.5
4.5
4.5
5.2
5.2
6.2
6.2
7.6
7.6
9.5
9.5
500
500
white
white
white
grey
grey
grey
grey
red
red
red
red
black
black
black
FTD2008
FTD2010
FTD2012
FTD1808GR
FTD1810
FTD1812GR
FTD1818GR
FTD1808R
FTD1812R
FTD1814
FTD1818R
FTD1608
FTD1612
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
FEATURES
10
12
8
10
12
18
8
12
14
18
8
12
18
10
12
18
12
18
12
18
12
18
16
25
10
12
8
10
12
18
8
12
14
18
8
12
18
10
12
18
12
18
12
18
12
18
16
25
500
500
500
500
500
500
500
500
500
500
500
500
100
500
100
100
100
100
100
100
100
100
50
Ferrules insure reliable
5
5.5
5.5
5.5
5.5
5.8
5.8
5.8
5.8
6.5
6.5
6.6
8
8
8
9
9
11.4
11.4
13.4
13.4
17.2
17.2
electrical connections when
terminating stranded flexi-
ble wire in terminal blocks,
circuit breakers or other
control devices. Insulated
ferrules prevent conductor
breakage due to bending,
wire stress or vibration
2
2
2
2.2
2.2
2.2
2.8
2.8
2.8
3.5
3.5
4.5
4.5
5.8
5.8
8.3
8.3
red
red
FTD1618
FTD1410
FTD1412
FTD1418
FTD1212
FTD1218
yellow
yellow
red
red
blue
while facilitating wire inser-
tion into the terminal clamp.
2 x 4
2 x 6
2 x 6
2 x 10
2 x 10
2 x 16
2 x 16
0.2
0.2
0.2
0.2
Altech’s UL insulated fer-
rules are color coded by
conductor size for conven-
ient identification.
black
black
ivory
ivory
olive
olive
FTD1012
FTD1018
FTD0812
FTD0818
FTD0616
FTD0625
2 x 8
2 x 6
2 x 6
0.2
0.3
0.3
blue
50
To ensure efficient ferrule
crimping, always select the
smallest ferrule diameter
that fits the wire and use
only professional crimping
tools.
Smaller Package Sizes
turquoise
orange
orange
orange
white
white
white
yellow
yellow
red
2 x 22
2 x 20
2 x 20
2 x 20
2 x 18
2 x 18
2 x 18
2 x 18
2 x 18
2 x 16
2 x 16
2 x 14
2 x 14
2 x 12
2 x 10
2 x 8
2 x 0.34
2 x 0.5
2 x 0.5
2 x 0.5
2 x 0.75
2 x 0.75
2 x 0.75
2 x 1
8
8
FTI2208M
FTI2008M
FTI2010M
FTI2012M
FTI1808WM
FTI1810M
FTI1812WM
FTI1808YM
FTI1812YM
FTI1608M
FTI1612M
blue
15
14
16
18
8
8
1.2
1.4
1.4
1.4
1.7
1.7
1.7
2
0.15 0.25
3.5
5
5
2
3
3
3
3
100
100
100
100
100
100
100
100
100
100
100
50
white
white
white
grey
grey
grey
red
red
black
black
FTD2008M
FTD2010M
FTD2012M
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.5
0.5
0.5
10
12
8
10
12
8
10
12
8
10
12
8
5
FTD1808GRM 14
FTD1810M 16
FTD1812GRM 18
5.5
5.5
5.5
5.8
5.8
6.5
6.5
8
8
9
11.4
13.4
3
3
FTD1808RM
FTD1812RM
FTD1608M
FTD1612M
15
19
16
20
19
21
22
23
24
3.2
3.2
3.6
3.6
4.5
4.5
5.2
6.2
7.6
In order meet the UL re-
quirements only matching
UL crimpers should be use.
2 x 1
12
8
12
8
2
2 x 1.5
2 x 1.5
2 x 2.5
2 x 2.5
2 x 4
2.2
2.2
2.8
2.8
3.5
4.5
5.8
red
12
10
12
12
12
12
12
10
12
12
12
12
FTD1410M
FTD1412M
FTD1212M
yellow
blue
grey
50
20
20
20
black
ivory
2 x 6
2 x 10
FTI1012M
FTI0812M
FTD1012M
FTD0812M
0.2
0.2
red
B
L1
L2
A
D1
S1
S2
Pull-Out Force Minimum Values for DIN
Minimum values of pull-out forces for FERRULES according to DIN EN 60947-1:2008, DIN EN 60999-1:2000 and DIN EN 60999-2:2004
Conductor
AWG 24
22
20 18
18
16
14
12
10
8
6
4
2
0
00 000 250 300 350 500 600
kcmil kcmil kcmil kcmil kcmil
Cross Section mm² 0,20 0,34 0,50 0,75 1,0 1,5 2,5 4,0 6,0 10
16 25
35 50
70
95 120 150 185 240 300
Pull Out Force 10 15 20 30 35 40 50 60 80 90 100 135 190 236 285 351 427 427 503 578 578
N
Pull-Out Force Minimum Values for UL486F
Conductor
Cross Section mm²
Pull Out Force
AWG
24
0,20
20
22
0,34
20
20
0,50
20
18
0,75
30
18
1,0
35
16
1,5
40
14
2,5
50
12
4,0
60
10
6,0
80
18
8
10
90
6
16
100
22.5
4
25
135
30.3
2
35
190
42.7
N
Pounds
4.5
4.5
4.5
6.7
7.9
9.0
11.2
13.5
20.2
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
117
FERRULES
CRIMPERS FOR UL FERRULES
These crimpers are specifically designed for use with ferrules and have been tested with our UL
Recognized ferrules to insure proper termination. In order to meet the UL requires, the correct
sized crimper from this range should be used.
Crimpit F 4
Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with or without plastic collars.
Only one crimping profile for the entire cross-section range.
2
Ferrules: 0,5 – 4 mm (20 – 12 AWG)
2
Twin Ferrules: 2 x 0.5 – 2 x 2.5 mm (2 x 20 – 2 x 14 AWG)
Cat. No.: Crimpit F 4
Weight 448 g
Crimpit F 6 Auto
Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with and
without plastic collars. Feeding from front.
2
Ferrules: 0,5 – 6 mm (20 – 10 AWG)
2
Twin Ferrules: 2 x 0.5 – 2 x 2.5 mm (2 x 20 – 2 x 14 AWG)
Cat. No.: Crimpit F 6 Auto
Weight 426 g
Crimpit F 6 Gyra
Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with and without plastic collars.
Rotatable crimp die for feeding from the front or the side.
2
Ferrules: 0,14 – 6 mm (26 – 10 AWG)
2
Twin Ferrules: 2 x 0.5 – 2 x 4 mm (2 x 20 – 2 x 12 AWG)
Cat. No.: Crimpit F 6 Gyra
Weight 428 g
Crimpit F 6 EN
Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with and without plastic collars.
Crimp conforms to EN 60947-1. Five crimping profiles for the rated conductor cross-sections.
Registration in accordance with VG 95211 (Military designation VG 95236 T 14 A 0001).
2
Ferrules: 0.25 – 6 mm (24 – 10 AWG)
2
Twin Ferrules: 2 x 0.75 – 2 x 4 mm (2 x 18 – 2 x 12 AWG)
Cat. No.: Crimpit F 6 EN
Weight 423 g
Crimpit F 6 L
Crimping tool for ferrules (conforming to DIN 46228 part 1 and 2) with and without insulating col-
lar. Five crimping profiles depending on the wire cross-sections.
2
Ferrules: 0.5 – 6 mm (20 – 10 AWG)
2
Twin Ferrules: 2 x 0.75 – 2 x 4 mm (2 x 18 – 2 x 12 AWG)
Cat. No.: Crimpit F 6 L
Weight 335 g
118
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
FERRULES
CRIMPERS FOR UL FERRULES
Crimpit F 16
Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with and without plastic collars.
Crimp conforms to EN 60947-1. Three crimping profiles for the rated conductor cross-sections.
Registration in accordance with VG 95211 (Military designation VG 95236 T 14 A 0002).
2
Ferrules: 6 – 16 mm (10 – 6 AWG)
Cat. No.: Crimpit F 16
Weight 418 g
Crimpit F 16 L
Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with and without plastic collars.
Crimp conforms to EN 60947-1. Three crimping profiles for the rated conductor cross-sections.
2
Ferrules: 6 – 16 mm (10 – 6 AWG)
Cat. No.: Crimpit F 16 L
Weight 380 g
Crimpit F 25 L
Crimping tool for ferrules (according to DIN 46228 part 1 and 4) as well as for twin ferrules.
2
Ferrules: 6 – 25 mm (10 – 4 AWG)
2
Twin Ferrules: 2 x 4 – 2 x 10 mm (2 x 12 – 2 x 8 AWG)
Cat. No.: Crimpit F 25 L
Weight 540 g
Crimpit F 50 L
Crimping tool for ferrules (according to DIN 46228 part 1 and 4) as well as for twin ferrules.
2
Ferrules: 35 – 50 mm (2 – 1 AWG)
2
Twin Ferrules: 2 x 16 mm (2 x 6 AWG)
Cat. No.: Crimpit F 50 L
Weight 540 g
Crimper Selection Guide
Single Wire
Dual Wire
AWG
Crimpit Crimpit Crimpit
F4 F6 Gyra F6 EN
Crimpit Crimpit Crimpit Crimpit Crimpit
F6 Auto F6L F16/F16L F25L F50L
AWG
mm²
0.14
0.25
0.34
0.5
0.75
1.0
1.5
2.5
4
mm²
26
24
22
20
18
18
16
14
12
10
8
2 x 22
2 x 20
2 x 18
2 x 16
2 x 14
2 x 12
2 x 8
2 x 0.34
2 x 0.5
2 x 0.75
2 x 1.5
2 x 2.5
2 x 4
6
10
2 x 6
6
16
4
25
2 x 6
2 x 10
2
35
1
50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
119
FERRULES
CRIMPIT F MULTI AND CRIMPING MACHINES
Cutter, Stripper and Crimper
This one tool will cut and strip the wires and uses belt feed ferrules for fast and easy installation.
Crimpit F Multi
Multi-function tool. Stripping and cutting of wires. Crimping tool for insulated belt-strip ferrules
according to DIN 40228.
2
Cross-section: 0.5 – 2.5 mm (20 – 14 AWG)
2
Ferrules: 0.5 x 2.5 mm (20 x 14 AWG)
Cat. No.: Crimpit F Multi
Weight 200 g
UL Recognized Insulated Belt Strip Ferrules
AWG
mm2 Barrel Length
(mm)
Industry Standard
DIN Standard
Std.
Pack
color
Cat. No.
color
Cat. No.
orange
white
grey
red
20
18
18
16
14
0.5
0.75
1
1.5
2.5
8
8
8
8
8
FII2008B
FII1808WB
FII1808YB
FII1608B
FID2008B
10 x 50
10 x 50
10 x 50
10 x 50
10 x 50
white
yellow
red
FID1808GRB
FID1808RB
FID1608B
black
blue
FID1408B
AUTOMATED FERRULE CRIMPING MACHINES
For technical and ordering information regarding
Ferrule Crimping Machines please contact Altech.
120
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
FERRULES
ORIGINAL INDUSTRY STANDARD FERRULES
HIGHLIGHTS
Original Industry Standard Ferrules
FEATURES
C
Ferrules insure reliable electri-
cal connections when terminat-
ing stranded flexible wire in
terminal blocks, circuit break-
ers or other control devices. In-
sulated ferrules prevent
conductor breakage due to
bending, wire stress or vibra-
tion while facilitating wire inser-
tion into the terminal clamp.
Tested According To:
CSA Std C22.2 No. 65-93
- Wire Connectors
CSA Std C22.2 No. 188-M1983 - Splicing Wire and Cable Connectors
ANSI/UL Std No.
ANSI/UL Std No.
486A
486C
- Wire Connectors and Soldering Lugs for Use with Copper Conductors
- Splicing Wire Connectors
220672
Cat.
No.
Barrel Length (B)
mm
Ferrule Dimensions mm
Std.
Pack*
2
AWG
mm
Color
A
B
C
D
24
0.25
Lt. Blue
2620.0
6
10
6
1.2
2.3
500/100
Altech’s standard insulated fer-
rules are color coded by con-
ductor size for convenient
identification.
24
22
22
20
20
18
18
18
18
16
16
16
14
14
14
12
12
12
10
10
8
0.25
0.34
0.34
0.5
0.5
0.75
0.75
1
Lt. Blue
Turquoise
Turquoise
Orange
Orange
White
White
Yellow
Yellow
Red
2621.0
2622.0
2623.0
2397.0
2201.0
2398.0
2202.0
2399.0
2203.0
2204.0
2400.0
2205.0
2206.0
2401.0
2207.0
2208.0
2402.0
2209.0
2210.0
2211.0
2212.0
2213.0
2214.0
2215.0
2267.0
2272.0
2276.0
2390.0
2500.0
2786.0
2787.0
2788.0
2789.0
8
12
10
12
12
14
12
14
12
14
14
16
24
14
18
24
17
20
26
20
26
22
28
24
28
30
36
30
39
36
37
44
48
58
8
1.2
1.2
1.2
1.3
1.3
1.5
1.5
1.7
1.7
2.0
2.0
2.0
2.5
2.5
2.5
3.2
3.2
3.2
3.9
3.9
4.9
4.9
6.2
6.2
7.7
7.7
8.7
8.7
10.9
13.4
15.4
17.6
20.5
2.3
2.5
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
100
6
6
8
8
2.5
To ensure efficient ferrule
crimping, always select the
smallest ferrule diameter that
fits the wire and use only pro-
fessional crimping tools.
6
6
2.8
8
8
2.8
6
6
3.3
8
8
3.3
• Sleeve: polypropylene
• Tube: tin-plated copper
6
6
3.5
1
8
8
3.5
1.5
1.5
1.5
2.5
2.5
2.5
4
8
8
4.0
Red
10
18
8
10
18
8
4.0
Red
4.0
CRIMPER
SELECTOR
GUIDE
Blue
4.7
Blue
12
18
10
12
18
12
18
12
18
12
18
18
22
18
25
20
20
25
27
32
12
18
10
12
18
12
18
12
18
12
18
18
22
18
25
20
20
25
27
32
4.7
Blue
4.7
page 18
Gray
5.4
4
Gray
5.4
4
Gray
5.4
6
Black
Black
Ivory
6.9
100
6
6.9
100
10
10
16
16
25
25
35
35
50
70
95
120
8.4
100
8
Ivory
8.4
100
6
Green
Green
Brown
Brown
Beige
Beige
Olive
9.6
100
6
9.6
100
4
12.0
12.0
13.5
13.5
16.0
17.0
19.0
22.4
25.0
50
4
50
2
50
2
50
1
50
2/0
3/0
4/0
Yellow
Red
25
5
Blue
25
250MCM 150
Yellow
25
* Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no.
Example for 100 standard pack: Cat. No. 2620.0/100
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
121
FERRULES
ORIGINAL DIN STANDARD FERRULES
HIGHLIGHTS
Original DIN Standard Ferrules
FEATURES
Ferrules insure reliable
electrical connections
when terminating stranded
flexible wire in terminal
blocks, circuit breakers or
other control devices.
Tested According To:
CSA Std C22.2 No. 65-93
- Wire Connectors
CSA Std C22.2 No. 188-M1983 - Splicing Wire and Cable Connectors
ANSI/UL Std No.
ANSI/UL Std No.
486A
486C
- Wire Connectors and Soldering Lugs for Use with Copper Conductors
- Splicing Wire Connectors
220672
Cat.
Color
Barrel Length (B)
mm
Ferrule Dimensions mm
Std.
Pack*
Insulated ferrules prevent
conductor breakage due to
bending, wire stress or vi-
bration while facilitating
wire insertion into the ter-
minal clamp.
2
AWG
mm
No.
A
B
C
D
20
0.50
White
2863.0
6
12
6
1.3
2.8
500/100
20
20
18
18
18
18
18
18
18
18
16
16
16
16
14
14
14
12
12
12
10
10
8
0.50
0.50
0.75
0.75
0.75
0.75
1
White
White
Gray
Gray
Gray
Gray
Red
2864.0
2865.0
2866.0
2867.0
2868.0
2869.0
2870.0
2871.0
2872.0
2840.0
2841.0
2842.0
2843.0
2844.0
2845.0
2846.0
2847.0
2848.0
2849.0
2850.0
2851.0
2852.0
2853.0
2854.0
2855.0
2856.0
2857.0
2858.0
2859.0
2860.0
8
14
16
12
14
16
18
12
14
16
18
14
16
18
24
14
18
24
17
20
26
20
26
22
28
24
28
30
36
30
39
8
1.3
1.3
1.5
1.5
1.5
1.5
1.7
1.7
1.7
1.7
2
2.8
2.8
3.3
3.3
3.3
3.3
3.5
3.5
3.5
3.5
4
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
100
10
6
10
6
Altech’s DIN standard fer-
rules are in compliance
with DIN requirements,
making them ideal for ex-
port applications. They
also have a specified color
code convention that dif-
fers from the color code
used for Altech’s industry
standard ferrules.
8
8
10
12
6
10
12
6
1
Red
8
8
1
Red
10
12
8
10
12
8
1
Red
To ensure efficient ferrule
crimping, always select the
smallest ferrule diameter
that fits the wire and use
only professional crimping
tools.
1.5
1.5
1.5
1.5
2.5
2.5
2.5
4
Black
Black
Black
Black
Blue
Blue
Blue
Gray
Gray
Gray
Yellow
Yellow
Red
10
12
18
8
10
12
18
8
2
4
2
4
2
4
2.5
2.5
2.5
3.2
3.2
3.2
3.9
3.9
4.9
4.9
6.2
6.2
7.7
7.7
8.7
8.7
4.7
4.7
4.7
5.4
5.4
5.4
6.9
6.9
8.4
8.4
9.6
9.6
12
• Sleeve: polypropylene
• Tube: tin plated copper
12
18
10
12
18
12
18
12
18
12
18
18
22
18
25
12
8
10
12
18
12
18
12
18
12
18
18
22
18
25
CRIMPER
SELECTOR
GUIDE
4
4
6
100
page 18
6
100
10
10
16
16
25
25
35
35
100
8
Red
100
6
Blue
Blue
Yellow
Yellow
Red
100
6
100
4
50
4
12
50
2
13.5
13.5
50
2
Red
50
1
50
Blue
2861.0
20
36
20
10.9
16
50
* Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no.
Example for 100 standard pack: Cat. No. 2863.0/100
122
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
FERRULES
ORIGINAL DUAL WIRE FERRULES
Original Dual Wire Ferrules
HIGHLIGHTS
FEATURES
Dual Wire Insulated
Tested According To:
CSA Std C22.2 No. 65-93
- Wire Connectors
Dual Wire Ferrules have
CSA Std C22.2 No. 188-M1983 - Splicing Wire and Cable Connectors
larger diameters and special
shaped sleeves that accept
two conductors of the same
or different size. They provide
an efficient connection of
multiple wires in the same
terminal clamp or simplify
wire jumpering between ter-
minal clamps. They are color
coded with the same con-
vention as the insulated DIN
standard ferrules.
ANSI/UL Std No.
ANSI/UL Std No.
486A
486C
- Wire Connectors and Soldering Lugs for Use with Copper Conductors
- Splicing Wire Connectors
220672
Wires
x AWG
Cat. Barrel Length (B)
No.
Ferrule Dimensions mm
Std.
Pack*
2
mm
Color
mm
A
B
C
D1
D2
2x20
2x18
2x18
2x18
2x18
2x16
2x16
2x14
2x14
2x12
2x10
2x8
2x0.50
2x0.75
2x0.75
2x1
White
Gray
Gray
Red
2794.0
2775.0
2795.0
2776.0
2796.0
2777.0
2797.0
2778.0
2798.0
2799.0
2800.0
2801.0
2802.0
11
11
13
11
21
12
16
14
17
16
18
18
20
14.6
14.6
16.4
15.4
25.2
15.8
19.6
18.5
20.5
22
8.2
8.2
10
8.2
18
8.2
12
10
12
12
12
12
16
1.7
2.0
2.0
2.4
2.4
2.6
2.6
3.3
3.3
3.9
5
3
5
5.5
5.5
5.8
5.8
6.5
6.5
8
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
100
3
3
3.2
3.2
3.6
3.6
4.5
4.5
5.2
6.2
7.6
9.5
2x1
Red
2x1.5
2x1.5
2x2.5
2x2.5
2x4
Black
Black
Blue
Blue
Gray
Yellow
Red
To ensure efficient ferrule
crimping always select the
smallest ferrule diameter that
fits the wire and use only
professional crimping tools.
8
9
• Sleeve: polypropylene
• Tube: tin plated copper
2x6
23
11.4
13.4
17.2
100
2x10
2x16
24
6.2
8.9
100
2X6
Blue
29
100/50
INSULATED FERRULES
Assortment Box
* Different standard packs are available for many
Handy Assortment Boxes for
convenient dispensing and
storage of Industry and DIN
Standard Insulated Ferrules.
Types AB1-S and AB1-D are
equipped with five different
ferrule sizes. Types AB2-S
and AB2-D are equipped
with four different ferrule
sizes. Contents of each box
is listed.
ferrules. To order the desired standard pack, please
use the quantity required as a suffix to the Cat. No.
Example: Cat. No. 2794.0/100 for a standard pack of 100
Ferrule
Qty.
Ferrule
Cat. No.
Ferrule
Color
Std.
Pack
2
AWG
mm
Type
Cat. No.
2884.9
AB1-S Industry Standard
50
100
100
100
50
AB1-S
1
20
20
18
16
14
0.5
0.75
1
2201.0
2202.0
2399.0
2204.0
2206.0
Orange
White
Yellow
Red
1.5
2.5
CRIMPER
SELECTOR
GUIDE
Blue
AB2-S Industry Standard
AB2-S
AB1-D
2885.9
2884.0
1
1
50
20
20
10
12
10
8
4
6
10
16
2208.0
2210.0
2212.0
2214.0
Gray
Black
Ivory
page 18
6
Green
AB1-D DIN Standard
50
20
20
18
16
14
0.5
0.75
1
1.5
2.5
2864.0
2867.0
2871.0
2841.0
2845.0
White
Gray
Red
Black
Blue
AB1-S
100
100
100
50
AB2-D DIN Standard
AB2-D
2885.0
1
50
20
20
10
12
10
8
4
6
10
16
2848.0
2851.0
2853.0
2855.0
Gray
Yellow
Red
6
Blue
AB2-S
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
123
FERRULES
ORIGINAL UNINSULATED FERRULES
HIGHLIGHTS
Original Uninsulated Ferrules
FEATURES
Ferrules insure reliable
electrical connections
when terminating
stranded flexible wire in
terminal blocks, circuit
breakers or other control
devices.
Tested According To:
CSA Std C22.2 No. 65-93
- Wire Connectors
CSA Std C22.2 No. 188-M1983 - Splicing Wire and Cable Connectors
ANSI/UL Std No.
ANSI/UL Std No.
486A
486C
- Wire Connectors and Soldering Lugs for Use with Copper Conductors
- Splicing Wire Connectors
220672
Cat.
Barrel Length (A)
Ferrule Dimensions mm
B (ID)
Std.
2
AWG
mm
No.
mm
A
C
Pack*
Uninsulated ferrules pre-
vent wire strands from
fraying and breaking and
are extremely cost effec-
tive. Their shorter lengths
and uninsulated bodies
offer advantages when
making terminations in
printed circuit board ter-
minal blocks and in other
terminal blocks with
20
0.5
0.75
0.75
1
2216.0
2217.0
2218.0
2219.0
2220.0
2221.0
2222.0
2223.0
2224.0
2225.0
2226.0
2227.0
2388.0
2228.0
2389.0
2229.0
2391.0
2392.0
2393.0
2394.0
2395.0
2396.0
2816.0
2790.0
2791.0
2792.0
2793.0
2815.0
2815.5
6
6
6
1.3
1.5
2.1
2.3
2.3
2.5
2.5
2.8
2.8
3.4
3.4
4.0
4.0
4.7
4.7
5.8
5.8
5.8
7.5
7.5
7.5
9.5
9.5
11
1000/100
1000/100
1000/100
1000/100
1000/100
1000/100
1000/100
1000/100
1000/100
1000/100
1000/100
500/100
500/100
500/100
500/100
500/100
500/100
500/100
100
18
6
18
10
6
10
6
1.5
18
1.7
18
1
10
7
10
7
1.7
16
1.5
1.5
2.5
2.5
4
2.3
16
10
7
10
7
2.3
14
2.5
smaller clamps or narrow
widths.
14
12
9
12
9
2.5
12
3.2
To ensure efficient ferrule
crimping, always select
the smallest ferrule diame-
ter that fits the wire and
use only professional
crimping tools. (Please
refer to the ordering pages
and the Crimper Selector
Guide on page 18.)
12
4
12
12.
15
12
15
18
12
15
18
15
18
18
32
25
32
32
32
32
40
12
12
15
12
15
18
12
15
18
15
18
18
32
25
32
32
32
32
40
3.2
10
6
3.9
10
6
3.9
8
10
10
10
16
16
16
25
25
35
50
70
95
120
150
185
240
4.9
8
4.9
8
4.9
• Tube: tin plated copper
6
6.2
6
6.2
6
6.2
4
7.7
500/100
100
4
7.7
2
8.7
100
1
10.9
13.3
15.3
17.5
19.5
21.2
23.0
13
100
2/0
15
100
3/0
17
50
4/0
19
25
250MCM
350MCM
500MCM
21
25
23.5
25
25
25
CRIMPER SELECTOR GUIDE
page 118, 119, 125 and 126
* Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no.
Example for 100 standard pack: Cat. No. 2216.0/100
124
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
FERRULES
UNIVERSAL CRIMPERS FOR ORIGINAL FERRULES
Universal Ferrule Crimpers for Original Ferrules
Front Conductor Entry
One die crimps a wide range of insulated and uninsulated ferrule sizes. Three Universal Ferrule
Crimpers are offered to crimp different ferrule and wire size ranges up to 16mm2 (6 AWG).
• Positive ratcheting with spring return
• Trapezoidal crimp geometry
• Comfort grip plastic handle
• Hardened steel frame, matte black
Universal Ferrule Crimper
Universal Ferrule Crimper
Universal Ferrule Crimper
Part No.
Wire/
AWG
Ferrule
mm
Std.
Pack
Part No.
Wire/
AWG
Ferrule
mm
Std.
Pack
Part No.
Wire/
AWG
Ferrule
mm
Std.
Pack
2
2
2
E110.000
26 - 10
0.14 - 6
1
E110.005
20 - 8
0.5 - 10
1
E110.010
8 - 6
10 - 16
1
Replacement Spring Set:
Replacement Spring Set:
Replacement Spring Set:
185140008
318001002
Handle Spring Set
Rachet Spring
185140008
318001002
Handle Spring Set
Rachet Spring
185140008
318001002
Handle Spring Set
Rachet Spring
Ferrule Crimper
Side Conductor Entry
• Positive ratcheting with spring return
• Emergency release
• Trapezoidal crimp geometry
• Comfort grip plastic handle
• Hardened steel frame, matte black
Individual crimp cavities conform to industry standard insulated
and uninsulated ferrules from 25-50mm2 (4-1 AWG).
Ferrule Crimper
Ferrule Crimper
Vise Mount Ferrule Crimper
Part No.
Wire/
AWG
Ferrule
mm
Std.
Pack
Part No.
Wire/
AWG
Ferrule
mm
Std.
Pack
Part No.
22.030
Wire/
AWG
Ferrule
mm
Std.
Pack
2
2
2
2/0-250
MCM
70 - 150
1
E110.015
4 - 2
25 - 35
1
E110.020
1
50
1
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
125
FERRULES
PNEUMATIC CRIMPING TOOL FOR ORIGINAL FERRULES
HIGHLIGHTS
Pneumatic Crimping Tool for Original Ferrules
FEATURES
Altech's pneumatic crimping tools speed
the crimping process of insulated or unin-
sulated ferrules for a wide range of wire
sizes up to 8 AWG.
• Operates on 60 - 90 psi air supply
• Crimp insulated and uninsulated
ferrules
• Trapezoidal crimp geometry
• Flexible coil air hose with 1/4"
NPT interchange
Altech pneumatic crimpers are simple and
easy to use. Just install the ferrule over the
end of the stripped wire and insert it into ei-
ther the front or side tool opening. Then
touch the actuating lever or push the foot
switch pedal to initiate the crimp cycle.
Once the head closes it will automatically re-
open after crimping. The resulting crimp fea-
tures a compact trapezoidal cross section
which is mechanically very strong and pro-
vides a large surface to insure a highly effi-
cient electrical contact.
• Metal tool body and base
• Hardened steel crimp head
Wire/ Ferrule Size
Tool Wt.
g (lbs.)
Std.
Pack
Crimp ferrules efficiently and economically.
A unique dual crimping head provides con-
venient front or side wire entry, allowing
crimping from multiple positions. This fea-
tures makes crimping in tight places simple.
2
Tool
AWG
mm
Cat. No.
22.014
Hand Held Crimper with Actuating Lever
Crimp Insulated Ferrules
24-14
12-8
0.25-2.5
4-10
430 (.95)
1
1
1
1
and Uninsulated Ferrules
Choose either lever actuated, hand held
units or hands-free foot switch operated
table top models, in two basic tool sizes.
Hand held models feature a flexible coil air-
hose with 1/4" NPT interchange connector
for quick hook-up with a standard push-to-
connect coupler.
Hand Held Crimper with Actuating Lever
Crimp Insulated Ferrules
22.015
22.016
22.017
430 (.95)
and Uninsulated Ferrules
Table Top Crimper with Foot Switch and Storage Trays
Crimp Insulated Ferrules
24-14
12-8
0.25-2.5
4-10
1000 (2.20)
1000 (2.20)
and Uninsulated Ferrules
The table top units also include a flexible coil
air hose to the foot switch and a 1/4" NPT
interchange located on the foot switch for
one hand push-to-connect supply hook-up.
They feature a sturdy metal base with inte-
gral table clamp and dual storage trays for
quick access to the ferrule supply. The air
release port on the foot switch has been qui-
eted with a sintered bronze air silencer. The
foot switch has a metal frame and a tough
fiberglass shroud. Its spring return pedal
provides for short actuating cycles.
Table Top Crimper with Foot Switch and Storage Trays
Crimp Insulated Ferrules
and Uninsulated Ferrules
Magnetic Mounting Holder
for hand held pneumatic crimpers
22.018
22.019
---
---
1
1
Counterbalance
for hand held pneumatic crimpers
Optional items for the hand held crimper in-
clude a counterbalance for maximum con-
trol and a magnetic holder for storage.
126
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
FERRULES
ORIGINAL FERRULE AND WIRE SIZE BY CRIMPER TYPE
Original Ferrule and Wire Size by Crimper Type
Use this Selector Guide to determine ferrule and wire sizes which can be crimped. Refer to following pages for selection and
ordering information of crimpers.
1. Determine the wire size(s) to be used.
2. To insure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire.
3. Based on the ferrule size, choose the crimper type appropriate for use.
4. Select the crimper style best suited for your application.
CRIMPER STYLES
VISE MOUNT
FERRULE
CRIMPER
UNIVERSAL FERRULE
CRIMPER
PNEUMATIC FERRULE CRIMPER
Ferrule Size
Wire Size
AWG
2
mm
26
0.14
24
22
20
20
18
16
14
12
10
8
0.25
0.34
0.50
0.75
1
1
2.5
4
6
10
6
16
4
25
2
35
1
50
2/0
3/0
4/0
70
95
120
150
250MCM
Dual Wire Ferrules
E110.000 crimper covers 2x20 to 2x12 AWG dual wire ferrules
E110.010 crimper covers 2x10 to 2x8 AWG dual wire ferrules
E110.015 crimper covers 2x6 AWG dual wire ferrules
Key:
= Cavity Range
2
* Insulated ferrule/wire size range is shown, uninsulated ferrule range is 16-14 AWG (1.5 - 2.5mm ).
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
127
INDEX
Cat. No.
Page Cat. No.
Page Cat. No.
Page Cat. No.
Page
40.002........................102
40.003........................102
40.004........................102
40.005........................102
40.006........................102
40.007........................102
40.008........................102
40.009........................102
40.010........................102
40.011 ........................102
40.012........................102
40.102........................103
40.103........................103
40.104........................103
40.105........................103
40.106........................103
40.107........................103
40.108........................103
40.109........................103
40.110 ........................103
40.111 ........................103
40.112 ........................103
40.202........................102
40.203........................102
40.204........................102
40.205........................102
40.206........................102
40.207........................102
40.208........................102
40.209........................102
40.210........................102
40.211 ........................102
40.212........................102
40.302........................103
40.303........................103
40.304........................103
40.305........................103
40.306........................103
40.307........................103
40.308........................103
40.309........................103
40.310........................103
40.311 ........................103
40.312........................103
40.402........................102
40.403........................102
40.404........................102
40.405........................102
40.406........................102
AGT2.5.........................84
AGT2.5/3......................84
AGT2.5/4......................85
AGT4............................84
AGT4/3.........................85
AGT4/4.........................85
AGT6............................84
AGT6/3.........................85
AS2.5 ...........................80
AS2.5/3 ........................81
AS2.5/4 ........................81
AS4 ..............................80
AS4/3 ...........................81
AS4/4 ...........................81
AS6 ..............................80
AS6/3 ...........................82
ATL2.5..........................83
ATL2.5H.......................83
ATLG2.5.......................83
AUX6..............................8
BS1016E....................105
BS1016EM1-12 .........105
BS1016EM13-24 .......105
BS24E........................105
BS24EM1-12..............105
BS24EM13-24 ...........105
BS60E........................105
BS60EM1-12..............105
BS60EM13-24 ...........105
CA102..................49, 109
CA103..................87, 109
CA202............49, 61, 109
CA302........................109
CA402........................109
CA502........................109
CA512/1-2....................61
CA512/1-3....................61
CA512/13-2..................61
CA512/13-3..................61
CA512/13-4..................61
CA512/1-4....................61
CA512/14-2..................61
CA512/14-3..................61
CA512/14-4..................61
CA512/15-2..................61
CA512/15-3..................61
CA512/15-4..................61
CA512/17-2..................61
CA512/17-3..................61
CA512/17-4..................61
CA512/2-2....................61
CA512/2-3....................61
CA512/2-4....................61
CA512/3-2....................61
CA512/3-3....................61
CA512/3-4....................61
CA512/4-2....................61
CA512/4-3....................61
CA512/4-4....................61
CA512/7-2....................61
CA512/7-3....................61
CA512/7-4....................61
CA512/8-2....................61
CA512/8-3....................61
CA512/8-4....................61
CA514/1-2....................61
CA514/1-3....................61
CA514/13-2..................61
CA514/13-3..................61
CA514/13-4..................61
CA514/1-4....................61
CA514/14/4A ...............61
CA514/14-2..................61
CA514/14-3..................61
CA514/14-3A ...............61
CA514/14-4..................61
CA514/15-2..................61
CA514/15-3..................61
CA514/15-4..................61
CA514/17-2..................61
CA514/17-3..................61
CA514/17-4..................61
CA514/2-2....................61
CA514/2-3....................61
CA514/2-4....................61
CA514/3-2....................61
CA514/3-3....................61
CA514/3-4....................61
CA514/4-2....................61
CA514/4-3....................61
CA514/4-4....................61
CA514/7-2....................61
CA514/7-3....................61
CA514/7-4....................61
CA514/8-2....................61
CA514/8-3....................61
40.407........................102
40.408........................102
40.409........................102
40.410........................102
40.411 ........................102
40.412........................102
40.502........................103
40.503........................103
40.504........................103
40.505........................103
40.506........................103
40.507........................103
40.508........................103
40.509........................103
40.510........................103
40.511 ........................103
40.512........................103
40.702........................103
40.703........................103
40.704........................103
40.705........................103
40.706........................103
40.707........................103
40.708........................103
40.709........................103
40.710........................103
40.711 ........................103
40.712........................103
2511110......................106
2511111......................106
2511115......................106
2511120 .....................106
2511121 .....................106
2511125 .....................106
2511150 .....................107
2511160 .....................107
2511110/1M................106
2511111/1M................106
2511115/1M................106
2511120/1M ...............106
2511121/1M ...............106
2511125/1M ...............106
2511150/1M ...............107
2511160/1M ...............107
ADL2.5(E)D1................82
ADL2.5(E)D2................82
ADLG2.5 ......................82
128
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
INDEX
Cat. No.
Page Cat. No.
Page Cat. No.
Page Cat. No.
Page
CA514/8-4....................61
CA601/S.....................107
CA602........................109
CA603........................108
CA607/S/Q...................48
CA611/S/Q...................48
CA623/10.....................48
CA623/2.......................48
CA623/3.......................48
CA623/4.......................48
CA624/10.....................48
CA624/2.......................48
CA624/3.......................48
CA624/4.......................48
CA625/10.....................48
CA625/2.......................48
CA625/3.......................48
CA625/4.......................48
CA627/10.....................48
CA627/2.......................48
CA627/3.......................48
CA627/4.......................48
CA628/2...................8, 48
CA628/3...................8, 48
CA629/2...................8, 48
CA629/3...................8, 48
CA701-15...................106
CA701-15/S ...............106
CA701-15/S-2M .........106
CA701-15-2M.............106
CA702......49, 61, 87, 109
CA703........................108
CA703/01.....................48
CA703/1.......................48
CA703/10.....................48
CA703/11 .....................60
CA703/2.......................48
CA703/3.......................48
CA703/4.......................48
CA703/6.......................48
CA703/8.......................48
CA703/9.......................60
CA704........................108
CA704/01.....................48
CA704/1.......................48
CA704/10.....................48
CA704/11 .....................60
CA704/2.......................48
CA704/3.......................48
CA718/2.......................48
CA718/3.......................48
CA718/4.......................48
CA721/10.....................48
CA721/100...................48
CA721/2.......................48
CA721/3.......................48
CA721/4.......................48
CA722/10.....................48
CA722/100...................48
CA722/2.......................48
CA722/3.......................48
CA722/4.......................48
CA723/10.....................48
CA723/2.......................48
CA723/3.......................48
CA723/4.......................48
CA724/10.....................48
CA724/2.......................48
CA724/3.......................48
CA724/4.......................48
CA725/10.....................48
CA725/2.......................48
CA725/3.......................48
CA725/4.......................48
CA727/10.....................48
CA727/100...................48
CA727/2.......................48
CA727/3.......................48
CA727/4.......................48
CA728/10.....................61
CA728/2.......................61
CA728/3.......................61
CA728/4.......................61
CA729/10.....................48
CA729/2.......................48
CA729/3.......................48
CA729/4.......................48
CA731/10.....................48
CA731/100...................48
CA732/10.....................48
CA732/100...................48
CA733/10.....................48
CA734/10.....................48
CA735/10.....................48
CA737/10.....................48
CA739/10.....................48
CA741/10.....................48
CA741/100...................48
CA741/2.......................48
CA741/3.......................48
CA741/4.......................48
CA742/10.....................48
CA742/100...................48
CA742/2.......................48
CA742/3.......................48
CA742/4.......................48
CA743/10.....................48
CA743/2.......................48
CA743/3.......................48
CA743/4.......................48
CA744/10.....................48
CA744/2.......................48
CA744/3.......................48
CA744/4.......................48
CA745/10.....................48
CA745/2.......................48
CA745/3.......................48
CA745/4.......................48
CA747/10.....................48
CA747/100...................48
CA747/2.......................48
CA747/3.......................48
CA747/4.......................48
CA749/10.....................48
CA749/2.......................48
CA749/3.......................48
CA749/4.......................48
CA751/10.....................48
CA751/2.......................48
CA751/3.......................48
CA751/4.......................48
CA761/10.....................48
CA761/2.......................48
CA761/3.......................48
CA761/4.......................48
CA770/10.....................48
CA771/10.....................48
CA771/2.......................48
CA771/3.......................48
CA771/4.......................48
CA772/10.....................61
CA772/2.......................61
CA772/3.......................61
CA772/4.......................61
CA774/2.......................61
CA704/4.......................48
CA704/6.......................48
CA704/8.......................48
CA704/9.......................60
CA705........................108
CA705/01.....................48
CA705/1.......................48
CA705/10.....................48
CA705/11 .....................60
CA705/2.......................48
CA705/3.......................48
CA705/4.......................48
CA705/6.......................48
CA705/8.......................48
CA705/9.......................60
CA707/S/Q/01..............48
CA707/S/Q/1................48
CA707/S/Q/2................48
CA707/S/Q/3................48
CA707/TS/01 .................6
CA707/TS/05 .................6
CA707/TS/06 .................7
CA710/10.....................48
CA710/2.......................48
CA710/3.......................48
CA710/4.......................48
CA711/10 .....................48
CA711/2 .......................48
CA711/3 .......................48
CA711/4 .......................48
CA714/10.....................48
CA714/2.......................48
CA714/3.......................48
CA714/4.......................48
CA715/10.....................48
CA715/2.......................48
CA715/3.......................48
CA715/4.......................48
CA716/10.....................48
CA716/2.......................48
CA716/3.......................48
CA716/4.......................48
CA717/10.....................48
CA717/2.......................48
CA717/3.......................48
CA717/4.......................48
CA718/10.....................48
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
129
INDEX
Cat. No.
Page Cat. No.
Page Cat. No.
Page Cat. No.
Page
CA774/3.......................61
CA774/4.......................61
CA781/10.....................48
CA781/2.......................48
CA781/3.......................48
CA781/4.......................48
CA801/1.......................86
CA801/1-3....................86
CA801/2.......................86
CA801/2-3....................86
CA801/3.......................86
CA801/3-3....................86
CA802......49, 61, 87, 109
CA803/1.......................92
CA901/1.......................86
CA901/2.......................86
CA901/3.......................86
CA901/4.......................86
CA901/5.......................86
CA901/6.......................86
CA902........................108
CAFL4U .......................22
CAFL4U(L)/110............22
CAFL4U(L)/220............22
CAFL4U(L)/24..............22
CAFL4U(L)/48..............22
CAFL4U(N) ..................22
CASP .........................108
CB16/2H ......................94
CB16/3H ......................94
CB4/1...........................94
CB4/2...........................94
CB4/2H ........................94
CB4/3...........................94
CB4/3H ........................94
CB6/1...........................94
CB6/2H ........................94
CB6/3H ........................94
CB6/4H ........................94
CBB120........................59
CBB120LS ...................59
CBB150........................59
CBB150LS ...................59
CBB185........................59
CBB185LS ...................59
CBB35/50.....................58
CBB35/50LS ................58
CBB70..........................58
CBB70LS .....................58
CDL4U(E)L1/6V...........45
CDL4U(E)L2/24V.........45
CDL4U(E)L2/6V...........45
CDL4U(E)LA/1000V.....46
CDL4U(E)LA/230V.......46
CDL4U(E)LA/600V.......46
CDL4U(E)LA/75V.........46
CDL4U(E)LA/90V.........46
CDL4U(E)LD1/12V ......45
CDL4U(E)LD1/24V ......45
CDL4U(E)LD2/12V ......45
CDL4U(E)LD2/24V ......45
CDL4U(E)LD3/12V ......44
CDL4U(E)LD3/24V ......44
CDL4U(E)LD4/24V ......45
CDL4U(E)LD4/48V ......45
CDL4U(E)LD5/110V.....44
CDL4U(E)LD5/220V ....44
CDL4U(E)LD5/24V ......44
CDL4U(E)LD5/48V ......44
CDL4U(E)MOV130V....47
CDL4U(E)MOV275V....47
CDL4U(E)MOV30V......47
CDL4U(E)MOV460V....47
CDL4U(E)MOV510V....47
CDL4U(E)MOV60V......47
CDL4U(E)MOV625V....47
CDL4U(E)MOV680V....47
CDL4U(E)MOV75V......47
CDL4U(E)N1/110V.......44
CDL4U(E)N1/220V ......44
CDL4U(E)RC0.1 ..........46
CDL4U(E)RC0.22 ........46
CDL4U(E)SDB12VDC .47
CDL4U(E)SDB160VDC47
CDL4U(E)SDB24VDC .47
CDL4U(E)SDB48VDC .47
CDL4U(E)SDUA12VDC47
CDL4U(E)SDUA24VDC47
CDL4U(E)SDUA48VDC47
CDL4U(E)SDUK12VDC47
CDL4U(E)SDUK24VDC47
CDL4U(E)SDUK48VDC47
CDL4U(O)....................45
CDL4UN.......................10
CDL4UN(I.S)................10
CDL4USP ....................42
CDLG2.5 ......................11
CDLG4 .........................11
CDLG4(I.S) ..................11
CDS6U.........................26
CDS6U/FT ...................26
CDS6U/SC...................41
CDS6U/TS ...................26
CDTTU.........................30
CDTTUFT ....................30
CDTTUFTSC ...............41
CDTTUSC....................41
CDTTU-SH...................30
CENC16.......................36
CENC35.......................36
CENC4.........................36
CF4PFT .......................19
CF4SP ...................19, 29
CF4SP(L)/110-240V.....19
CF4SP(L)/6-60V ..........19
CF4SPFT.....................29
CF4U......................18, 89
CF4U(L)/110-240V.......18
CF4U(L)/6-60V.............18
CGMT4 ........................89
CGT10N.......................17
CGT16N.......................17
CGT35U.......................17
CGT4N.........................16
CGT4U.........................16
CGT6N.........................16
CHV10U.......................37
CHV4U.........................37
CHV6U.........................37
CKT4SP.......................29
CKT4SPSC..................41
CKT4U .........................28
CKT4U/4 ......................28
CM1.5S........................93
CM1.5S2......................93
CM2.5S........................93
CM2.5S2......................93
CM4S...........................93
CM4S2.........................93
CMB4...........................90
CMC1-2..........................9
CMC2-2..........................9
CMCG4..........................9
CMDB10/10 .................34
CMDB10/2 ...................34
CBB95..........................58
CBB95LS .....................58
CBS3U.........................52
CBS4U.........................52
CBS5U.........................52
CCC4U.........................23
CDB10/2 ......................33
CDB10/3 ......................33
CDB10/4 ......................33
CDB25/1 ......................33
CDB25/2 ......................33
CDB25/3 ......................33
CDB25/4 ......................33
CDB4/1 ........................33
CDB4/10(1)..................32
CDB4/11(1) ..................32
CDB4/2 ........................33
CDB4/2(1)....................32
CDB4/3 ........................33
CDB4/3(1)....................32
CDB4/4 ........................33
CDB4/4(1)....................32
CDB4/5 ........................33
CDB4/5(1)....................32
CDB4/6 ........................33
CDB4/6(1)....................32
CDB6/1 ........................33
CDB6/2 ........................33
CDB6/3 ........................33
CDB6/4 ........................33
CDL4U SPACER........108
CDL4U(E)3LA/230V.....46
CDL4U(E)3LA/350V.....46
CDL4U(E)3LA/600V.....46
CDL4U(E)3LA/90V.......46
CDL4U(E)D1................42
CDL4U(E)D2................42
CDL4U(E)D3................42
CDL4U(E)D4/12V ........43
CDL4U(E)D4/24V ........43
CDL4U(E)DD1 .............42
CDL4U(E)DD2 .............42
CDL4U(E)DD3 .............43
CDL4U(E)DD4 .............43
CDL4U(E)DD5/12V......43
CDL4U(E)DD5/24V......43
CDL4U(E)L1/24V.........45
130
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
INDEX
Cat. No.
Page Cat. No.
Page Cat. No.
Page Cat. No.
Page
CMDB10/3 ...................34
CMDB10/4 ...................34
CMDB25/10 .................34
CMDB25/2 ...................34
CMDB25/3 ...................34
CMDB25/4 ...................34
CMDB4/10 ...................34
CMDB4/2 .....................34
CMDB4/3 .....................34
CMDB4/4 .....................34
CMDB6/10 ...................34
CMDB6/2 .....................34
CMDB6/3 .....................34
CMDB6/4 .....................34
CMS2.5........................91
CMT4 ...........................89
CMTB35.....................108
CPD1 ...........................75
CPF........................23, 75
CPF(L)110-240V..........75
CPF(L)6-60V................75
CPFL110-240V ............23
CPFL6-60V ..................23
CSB3/N3U ...................53
CSB3/N3UL .................53
CSB4/N4U ...................53
CSB5/N5U ...................53
CSC16T .......................65
CSCP2.5T....................92
CSCP2.5T2..................92
CSDL4U.......................31
CSP1............................49
CSTSB4U ....................55
CSTSB5U ....................55
CSTSN4U ....................54
CSTSN5U ....................54
CSTSN6U ....................54
CSTSPC1-2 .................61
CSTSPC1-3 .................61
CSTSPC1-4 .................61
CTC4U.........................39
CTL2.5U.......................14
CTL2.5U(I.S)................14
CTL2.5U(L)/110 ...........15
CTL2.5U(L)/12 .............15
CTL2.5U(L)/220 ...........15
CTL2.5U(L)/24 .............15
CTL2.5U(L)/48 .............15
CTL2.5U-H...................14
CXCC4.........................75
CXCP2.5/4...................92
CXDB35/10............35, 79
CXDB35/10A .........35, 79
CXDIN..........................78
CXDL2.5 ......................71
CXDL2.5(E)D1.............72
CXDL2.5(E)D2.............72
CXDL2.5(E)D3.............72
CXDL2.5(E)DD1 ..........73
CXDL2.5(E)DD2 ..........73
CXDL2.5(E)DD3 ..........73
CXDL2.5(E)DD4 ..........73
CXDL2.5(E)LD1...........73
CXDL2.5(E)TS1...........73
CXDL2.5(I.S)................71
CXDLG2.5....................71
CXDLG2.5(I.S).............71
CXF4............................74
CXF4(L)110-240V........74
CXF4(L)6-60V..............74
CXG10 .........................69
CXG10/3 ......................70
CXG2.5 ........................68
CXG2.5/3 .....................69
CXG2.5/4 .....................69
CXG4 ...........................68
CXG4/3 ........................69
CXG4/4 ........................70
CXG6 ...........................68
CXG6/3 ........................70
CXK2.5.........................76
CXK2.5/4......................76
CXK4............................76
CXLPN.........................78
CXM2.5........................91
CXMG2.5 .....................91
CXPOL.........................78
CXS2.5.........................77
CXS4............................77
CXSG2.5......................77
CXSG4.........................77
CXSR2N ......................78
CXSR4N ......................78
D35CLIP-M4 ..............108
D35CLIP-M5 ..............108
DDDL4U.......................31
DDFL4U.......................20
DDFL4U(E)/110 ...........20
DDFL4U(E)/220 ...........20
DDFL4U(E)/24 .............20
DDFL4U(E)/440 ...........20
DDFL4U(E)/48 .............20
DDFL4U(E)LR/110.......21
DDFL4U(E)LR/220.......21
DDFL4U(E)LR/24.........21
DDFL4U(E)LR/440.......21
DDFL4U(E)LR/48.........21
DDFL4ULR ..................21
EP0DL2.5.....................49
EP0DL4U.....................49
EP10DL2.5...................49
EP10DL4U...................49
EP2.5/4UN...................49
EP6/10U.......................49
EPADL2.5 ....................87
EPADLG2.5..................87
EPAS2.5.......................87
EPAS4..........................87
EPAS6..........................87
EPATL2.5.....................87
EPATL2.5H ..................87
EPATLG2.5 ..................87
EPCAFL4U ..................49
EPCBS3U ....................61
EPCDL4U ....................49
EPCDL4UN..................49
EPCDLG2.5 .................49
EPCDS6U....................49
EPCDTTU....................49
EPCKT4U ....................49
EPCKT4U/4 .................49
EPCM1.5S ...................93
EPCM2.5S ...................93
EPCM4S ......................93
EPCMB4 ......................90
EPCMC1-2...................49
EPCMC2-2...................49
EPCMT4 ................49, 89
EPCSCP2.5T...............92
EPCSFL4U ..................49
EPCSTSU....................61
EPCTC4U ....................49
EPCTL2.5U..................49
EPCTL2.5U-H..............49
EPCTLG2.5..................49
CTL2.5UH(I.S)D2.........15
CTL2.5U-H(L)/110........15
CTL2.5U-H(L)/12 .........15
CTL2.5U-H(L)/220 .......15
CTL2.5U-H(L)/24 .........15
CTL2.5U-H(L)/48 .........15
CTLG2.5 ......................15
CTLG2.5(E)MOV130V.47
CTLG2.5(E)MOV275V.47
CTLG2.5(E)MOV30V...47
CTLG2.5(E)MOV60V...47
CTLG2.5(E)MOV75V...47
CTS10U .........................7
CTS10USC ..................40
CTS16U .........................7
CTS2.5U-N ....................6
CTS25UN.......................7
CTS35UN.......................7
CTS4U-N .......................6
CTS4USC ....................40
CTS50/70N ....................8
CTS50/70NA..................8
CTS6U ...........................6
CTS6USC ....................40
CTS95/120N ..................8
CTSPC.........................49
CTT2.5UG....................38
CTT2.5UJ.....................38
CTT2.5UK....................38
CTT2.5UT ....................38
CX10............................65
CX10/3.........................66
CX2.5...........................64
CX2.5/1B......................78
CX2.5/3........................65
CX2.5/4........................65
CX2.5/4(E)D1...............67
CX2.5/4P......................67
CX2.5PLN....................78
CX2.5PN......................78
CX2.5SLN....................78
CX2.5SN......................78
CX4..............................64
CX4/3...........................66
CX4/4...........................66
CX6..............................64
CX6/3...........................66
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
131
INDEX
Cat. No.
Page Cat. No.
Page Cat. No.
Page Cat. No.
Page
EPCX10 .......................87
EPCX10/3 ....................87
EPCX2.5 ......................87
EPCX2.5/3 ...................87
EPCX2.5/4 ...................87
EPCX4 .........................87
EPCX4/3 ......................87
EPCX4/4 ......................87
EPCX6 .........................87
EPCX6/3 ......................87
EPCXDL2.5..................87
EPCXM2.5 ...................91
EPCXS2.5....................87
EPCXS4.......................87
EPDDFL4U ..................49
EPSTH3.......................61
EPSTH4.......................61
EPSTH4DT ..................61
EPSTH6.......................61
EPUSC.........................49
GMH1.........................110
GMH2.........................110
GMH3.........................110
GMH4.........................110
GMH5.........................110
GMH6.........................110
GMH7.........................110
GMH8.........................110
GMH8N ......................110
GT10U .........................17
H4 ..............................105
H6 ..............................105
HCL10-12...................104
HCL10-2.....................104
HCL10-3.....................104
HCL10-4.....................104
HCL12-12...................104
HCL12-2.....................104
HCL12-3.....................104
HCL12-4.....................104
HCL15-12...................104
HCL15-2.....................104
HCL15-3.....................104
HCL15-4.....................104
HCL8-12.....................104
HCL8-2.......................104
HCL8-3.......................104
HCL8-4.......................104
HE10HWPR/02............99
HE1HWPR/06..............98
HE1HWPR/07..............98
HE1HWPR/08..............98
HE1HWPR/09..............98
HE1HWPR/10..............98
HE1HWPR/11 ..............98
HE1HWPR/12..............98
HE1WPR/02.................96
HE1WPR/03.................96
HE1WPR/04.................96
HE1WPR/05.................96
HE1WPR/06.................96
HE1WPR/07.................96
HE1WPR/08.................96
HE1WPR/09.................96
HE1WPR/10.................96
HE1WPR/11.................96
HE1WPR/12.................96
HE42BU/02................100
HE42BU/03................100
HE42BU/04................100
HE42BU/05................100
HE42BU/06................100
HE42BU/07................100
HE42BU/08................100
HE42BU/09................100
HE42BU/10................100
HE42BU/11 ................100
HE42BU/12................100
HE42SBU/02..............101
HE42SBU/03..............101
HE42SBU/04..............101
HE42SBU/05..............101
HE42SBU/06..............101
HE42SBU/07..............101
HE42SBU/08..............101
HE42SBU/09..............101
HE42SBU/10..............101
HE42SBU/11..............101
HE42SBU/12..............101
HE42SST/02..............101
HE42SST/03..............101
HE42SST/04..............101
HE42SST/05..............101
HE42SST/06..............101
HE42SST/07..............101
HE42SST/08..............101
HE42SST/09..............101
HE42SST/10..............101
HE42SST/11 ..............101
HE42SST/12..............101
HE42ST/02 ................100
HE42ST/03 ................100
HE42ST/04 ................100
HE42ST/05 ................100
HE42ST/06 ................100
HE42ST/07 ................100
HE42ST/08 ................100
HE42ST/09 ................100
HE42ST/10 ................100
HE42ST/11.................100
HE42ST/12 ................100
HE4HNWPR/02 ...........98
HE4HNWPR/03 ...........98
HE4HNWPR/04 ...........98
HE4HNWPR/05 ...........98
HE4HNWPR/06 ...........98
HE4HNWPR/07 ...........98
HE4HNWPR/08 ...........98
HE4HNWPR/09 ...........98
HE4HNWPR/10 ...........98
HE4HNWPR/11............98
HE4HNWPR/12 ...........98
HE4WPR/02.................96
HE4WPR/03.................96
HE4WPR/04.................96
HE4WPR/05.................96
HE4WPR/06.................96
HE4WPR/07.................96
HE4WPR/08.................96
HE4WPR/09.................96
HE4WPR/10.................96
HE4WPR/11.................96
HE4WPR/12.................96
HE6HWPR/02..............99
HE6HWPR/03..............99
HE6HWPR/04..............99
HE6HWPR/05..............99
HE6HWPR/06..............99
HE6HWPR/07..............99
HE6HWPR/08..............99
HE6HWPR/09..............99
HE6HWPR/10..............99
HE6HWPR/11 ..............99
HE6HWPR/12..............99
HE6WPR/02.................97
HE10HWPR/03............99
HE10HWPR/04............99
HE10HWPR/05............99
HE10HWPR/06............99
HE10HWPR/07............99
HE10HWPR/08............99
HE10HWPR/09............99
HE10HWPR/10............99
HE10HWPR/11 ............99
HE10HWPR/12............99
HE10WPR/02...............97
HE10WPR/03...............97
HE10WPR/04...............97
HE10WPR/05...............97
HE10WPR/06...............97
HE10WPR/07...............97
HE10WPR/08...............97
HE10WPR/09...............97
HE10WPR/10...............97
HE10WPR/11...............97
HE10WPR/12...............97
HE16HWPR/02............99
HE16HWPR/03............99
HE16HWPR/04............99
HE16HWPR/05............99
HE16HWPR/06............99
HE16HWPR/07............99
HE16HWPR/08............99
HE16HWPR/09............99
HE16HWPR/10............99
HE16HWPR/11 ............99
HE16HWPR/12............99
HE16WPR/02...............97
HE16WPR/03...............97
HE16WPR/04...............97
HE16WPR/05...............97
HE16WPR/06...............97
HE16WPR/07...............97
HE16WPR/08...............97
HE16WPR/09...............97
HE16WPR/10...............97
HE16WPR/11...............97
HE16WPR/12...............97
HE1HWPR/02..............98
HE1HWPR/03..............98
HE1HWPR/04..............98
HE1HWPR/05..............98
132
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
INDEX
Cat. No.
Page Cat. No.
Page Cat. No.
Page
HE6WPR/03.................97
HE6WPR/04.................97
HE6WPR/05.................97
HE6WPR/06.................97
HE6WPR/07.................97
HE6WPR/08.................97
HE6WPR/09.................97
HE6WPR/10.................97
HE6WPR/11.................97
HE6WPR/12.................97
HEP4/16H..................104
JX10/2..........................86
JX2.5/10.......................86
JX2.5/2.........................86
JX2.5/3.........................86
JX2.5/4.........................86
JX2.5/5.........................86
JX2.5/6.........................86
JX2.5/7.........................86
JX2.5/8.........................86
JX4/10..........................86
JX4/16..........................86
JX4/2............................86
JX4/3............................86
JX4/4............................86
JX4/8............................86
JX6/10..........................86
JX6/2............................86
JX6/3............................86
JX6/4............................86
JXS10/2.5 ....................86
JXS10/4 .......................86
JXS6/2.5 ......................86
JXS6/4 .........................86
LCCDS.........................26
LCSTH4DT ..................57
MH2.5 ............................6
MH4 ...............................6
MHPTB35 ....................60
MT10 ..........................111
MT12 ..........................111
MT16 ..........................111
MT2 ............................111
MT2B4........................111
MT2G .........................111
MT3 ............................111
MT4 ............................111
MT5 ............................111
MT6 ............................111
MT6F..........................111
MT8 ............................111
MT9 ............................111
MT9F..........................111
MTG1 .........................110
MTG2 .........................110
NEB10..........................36
NEB6............................36
NES..............................36
ODL2.5.........................13
ODL2.5(I.S)..................13
ODL4U.........................12
ODLG2.5......................13
ODLG2.5(I.S)...............13
PP2.5/4UN...................49
PP25UN.......................49
PP35UN.......................49
PP6/10U.......................49
PPCMT4 ................49, 89
PPCX4 .........................87
PPCX4.3 ......................87
PPCX4/4 ......................87
PPCX6 .........................87
PSPTB35 .....................60
PSPTB70 .....................60
PTB35/50.....................60
PTB35/50SH................60
PTB70/95.....................60
PTB70/95SH................60
Q11/2 ...........................57
QJ8/2 ...........................26
SLS2 ............................26
SLS3 ............................26
SLS4 ............................26
SP2.5/4UN...................49
SP6/10U.......................49
SPCDL4U ....................49
SPCDLG2.5 .................49
SPCMB4 ......................49
STH3............................56
STH4............................56
STH4DT.......................57
STH4DTFT...................57
STH4DTSH..................57
STH6............................56
SWL10 .......................108
SWL4 .........................108
TM5............................110
TPSLS..........................26
TX2.5 ...........................87
TX4 ..............................87
TX6 ..............................87
WLX10 .......................108
WLX2.5 ......................108
WLX4 .........................108
WLX6 .........................108
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
133
TERMS & CONDITIONS
STANDARDTERMS AND CONDITIONS OF SALE
TITLE - Title to the products of ALTECH shall remain with ALTECH
until payment is made in full by Customer. Such reservation of title is for
the purpose of securing the purchase price and shall not relieve Customer
of the duty to inspect the products upon receipt, to notify ALTECH of any
deficiencies or defects, and to exercise due care in the use, installation,
operation, and maintenance of the products when on the premise of the
Customer or under the control of the Customer. Notwithstanding any reser-
vation of title by ALTECH, risk of loss shall pass to customer at any time
of shipment.
PATENT INDEMNITY - ALTECH shall defend or settle any suit or pro-
ceeding brought against Customer based on a claim that any equipment
made to ALTECH design and furnished hereunder constitutes an infringe-
ment of any existing United States patent, provided (ALTECH) is notified
promptly in writing and is given complete authorization and information re-
quired for the defense, and ALTECH shall pay all damages and costs
awarded against Customer, but shall not be responsible for any costs, ex-
pense or compromise incurred or made by Customer without ALTECH’s
prior written consent. If any equipment is in ALTECH’s opinion likely to or
does become the subject of a claim for patent infringement, ALTECH may
at its option and expense procure for Customer the right to continue using
the device, modify it to become non-infringing, but in the event ALTECH is
not reasonably able to modify, substitute, or otherwise procure for Cus-
tomer the right to continue using it, ALTECH will remove such equipment
and refund to Customer the amount paid in excess of a reasonable rental
for past use.
SHIPMENT AND DELIVERY - All orders for destination in the mainland
United States (less Hawaii, Alaska and non-continental United States pos-
sessions) will be shipped F.O.B. Flemington, N.J. All destination, shipping
and other charges shall be paid by the Customer in accordance with AL-
TECH’s then current shipping and billing practices.
Delivery dates given in the acceptance of any order are approximate.
ALTECH shall not be liable for delays in delivery or in performance due to
causes beyond its reasonable control including acts of God, acts of Cus-
tomer, acts of civil or military authority, fires, strikes or other labor distur-
bances, war, riot or delays in transportation. In the event of such delay,
the date of delivery or performance shall be extended for a period equal
to the time lost by reason of the delay.
ALTECH shall not be liable for any infringement or claim based upon
use of the equipment in combination with other equipment not supplied by
ALTECH or with modifications made by Customer.
The foregoing states the entire liability of ALTECH to Customer arising
from patent infringement.
SELLER’S REMEDIES - Should Customer fail to make any payment
within ten (10) days of its due date, or fail to perform any other of the Cus-
tomer’s obligation hereunder upon thirty (30) days written notice, or should
Customer be or become insolvent or be a party to any bankruptcy receiver-
ship proceeding prior to full payment of all amounts payable hereunder,
ALTECH may: (a) with or without demand or notice to customer declare
the entire amount unpaid immediately due and payable; (b) enter upon
the premises where the equipment may be found and remove it (Customer
shall assemble the equipment and make it available to ALTECH at a place
reasonably convenient to both parties and shall permit and assistALTECH
in effecting the retaking and removal of the equipment); and (c) sell any
or all the equipment as permitted under applicable law, applying the pro-
ceeds of the sale to payment of the expenses of retaking, repairing and
selling the equipment, reasonable attorney fees and to the satisfaction of
all indebtedness then due and unpaid under this Agreement. Any surplus
shall be paid to Customer and any deficiency shall be paid to ALTECH by
Customer.
PRICE - PRICES in any ALTECH publication are subject to change
without prior notification. Catalog prices are based on prices published in
the current price list. All written quotations are valid for thirty (30) days from
the date of quotation. Customer shall pay all sales, use, excise or similar
taxes whenever ALTECH must itself pay and/or collect such tax from Cus-
tomer arising out of the sale.
PAYMENT - Customer agrees to make payment within thirty (30) days
of date of the invoice from ALTECH. Customer agrees to pay a late pay-
ment charge of one and one-half percent (1.5% per month, or the maxi-
mum late payment charge permitted by applicable law, whichever is less,
on any unpaid amount for each calendar month (or fraction thereof) that
such payment is in default. Orders amounting to less than $100.00 will be
billed at $100.00 plus freight. Full carton purchases are required. In the
event of referral to an attorney for collection, reasonable attorney’s fees
for collection of the overdue amount shall be paid by Customer. In the
event payment is not received within 30 days from the date of invoice, any
discount shall be cancelled and the full list price will be due.
The remedies provided herein shall be cumulative and in addition to
LIMITEDWARRANTY -ALTECH warrants to Customer that the equip- all other remedies provided by law or equity or under the Uniform Com-
ment purchases shall be free from defects in material and workmanship mercial Code.
under normal use and service for a period of one year from shipment.
Written notice as an explanation of the circumstances of any claim that
the equipment has proved defective in material or workmanship shall be
given promptly by the Customer to ALTECH.
GOVERNING LAW - This agreement will be governed by the Laws of
the State of New Jersey.
GENERAL - This Agreement shall only become effective and binding
when either (a) it has been accepted and executed by an authorized rep-
resentative of ALTECH, or (b) the equipment has been shipped to Cus-
tomer, with or without acceptance in writing hereon. Notice of acceptance
is hereby waived by Customer. Customer hereby acknowledges receipt
of a true and complete copy hereof.
ALTECH will not be liable for any misuse, improper operations, im-
proper installation, improper maintenance, alteration, modification, acci-
dent or unusual degradation of the equipment or parts due to an unsuitable
installation environment.
No representation of other affirmation of facts, including but not limited
to statements regarding capacity, suitability for use or performance of the
equipment, shall be or be deemed to be a warranty or representation by
ALTECH for any purpose, nor give rise to any liability or obligation of AL-
TECH whatsoever.
No addition to or modification of any of the Terms and Conditions of
Sale as they appear herein shall be binding upon ALTECH unless signed
in writing by duly authorized representative of ALTECH in Flemington, N.J.
Typographical and clerical errors in quotations, orders and acknowl-
edgments are subject to correction.
Customer’s sole and exclusive remedy in the event of breach of war-
ranty, as set forth herein, is expressly limited to (1) the correction of the
defect by adjustment, repair, modification, or replacement, or (2) issuance
of a credit or refund of the purchase price for the defective equipment at
ALTECH’s election and sole expense.
This Agreement is not assignable without the prior written consent of
ALTECH. Any attempt to assign any of the rights, duties or obligations of
this Agreement without such consent is void.
If any provision or provisions of this Agreement shall be held to be in-
valid, illegal or unenforceable, the validity, legality and enforceability, of
the remaining provisions shall not in any way be affected or impaired
thereby.
EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT,
THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED IN-
CLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
THIS WARRANTY EXTENDS ONLY TO THE CUSTOMER FROMAL-
TECH OR ITS AUTHORIZED DISTRIBUTOR.
ALTECH is not responsible for failure to fulfill its obligation under this
Agreement due to causes beyond its control, or except as agreed herein.
THE CUSTOMER ACKNOWLEDGES THAT HE HAS READ THE
AGREEMENT, UNDERSTANDS IT, AND AGREES TO BE BOUND BY
ITS TERMS AND CONDITIONS. FURTHERMORE, THE CUSTOMER
AGREES THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT
OF THE AGREEMENT BETWEEN THE PARTIES, WHICH SUPER-
SEDES ALL PROPOSALS OR PRIOR AGREEMENTS, ORAL OR WRIT-
TEN, EXPRESSED OR IMPLIED, ANDALL OTHER COMMUNICATIONS
BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER OF
THIS AGREEMENT.
LIMITATION OF LIABILITY - IN NO EVENT, SHALL ALTECH BE LI-
ABLE FOR LOSS OF PROFITS, INDIRECT, SPECIAL, CONSEQUEN-
TIAL OR OTHER SIMILAR DAMAGES ARISING OUT OF ANY BREACH
OF THIS AGREEMENT OR OBLIGATIONS UNDER THE AGREEMENT.
ALTECH SHALL NOT BE LIABLE FORANY DAMAGES CAUSED BY
DELAY IN SHIPMENT, INSTALLATION OR FURNISHING OF EQUIP-
MENT OR SERVICES UNDER THIS AGREEMENT.
No action arising out of any claimed breach of this Agreement may be
brought by either party more than two (2) years after the cause of action
has accrued.
134
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
OTHER PRODUCTS
ALTECH OFFERS A LARGE SELECTION OF
AUTOMATION AND CONTROL COMPONENTS
Circuit Protection Devices
Industrial Enclosures
Altech offers a broad selection of non-metallic
and aluminum Industrial Enclosures to meet
your diverse design requirements. Sizes range
from 1.97 x 2.05 x 1.38 to 35.43 x 11.81 x 5.59
inches. Materials include polycarbonate, poly-
styrene, polypropylene, ABS or aluminum.
Polycarbonate and aluminum series have
been recently expanded. Protection up to IP67
(NEMA 4, 4X). Smooth sidewalls or sidewalls
with knockouts. Enclosures can be mounted
directly onto a panel, frame or other mounting
surfaces. EMI / RFI Coating is available. Com-
petitive cover printing is available. Hinge Kits.
Customization available.
Altech the market leader in UL508 Manual
Motor Controllers/ Miniature Circuit Breakers
now introduces UL489 Miniature Circuit
Breakers and UL1077 Supplementary Protec-
tors. The UL489 versions are DIN rail mounted,
17.5mm wide, thermal magnetic, 240V,
480Y/277V AC, 50/60Hz, 125 and 250 VDC
models, with short circuit interrupt capacity of
10kA, a positive trip indicator, and are line/load
reversible. The UL1077 versions are DIN rail
mounted, 17.5mm wide, thermal magnetic,
480Y/277V AC, 50/60Hz, a short circuit with-
stand capacity 10kA, have a positive trip indi-
cator.
Altech Corp.®
Altech Corp.®
35 Royal Rd., Flemington, NJ 08822
908-806-9400
FAX 908-806-9490
www.altechcorp.com
35 Royal Rd., Flemington, NJ 08822
908-806-9400
FAX 908-806-9490
www.altechcorp.com
Smart Relays
PCB Spring Clamp &ꢀ Push-In Terminal Blocks
Supports up to 48 I/Os (32 digital inputs & 16
digital outputs). DST Feature Available. Backlit
LCD Screen for display & modification of pre-
selected parameters of functional blocks,
viewing I/O status and programming on the
device. PC software for programming, online
& offline simulation, documentation & printing.
Designed for use in automation for commercial
& Industrial sectors. Modbus Communication.
UL 508 (UL File No. E352868), IEC 61000-3-2
and IEC 61000-4-2-1~11. 250 lines of ladder
programming. 16 soft text messages, Time
Switches, Compare Counters, Timers, Coun-
ters & 12 analog functions.
New spring clamp printed circuit board termi-
nal blocks with push-in technology. Fixed
push-in PCB terminals, PCB power terminals
push-in, tension spring terminals and push-in
plugs.
Altech Corp.®
35 Royal Rd., Flemington, NJ 08822
908-806-9400
Altech Corp.®
35 Royal Rd., Flemington, NJ 08822
908-806-9400
www.altechcorp.com
www.altechcorp.com
Motor Disconnect Switches
Power Supplies
Altech DIN RAIL mountable power supplies
have Universal AC input. They are suitable for
industrial and automation applications. UL508
Listed or UL Recognized. Single and Three
phases up to 960W. Outputs of 5V, 12V, 15V,
24V and 48V. Class 2 devices are available. In-
stalled on DIN rail TS35/ 7.5 or 15. Protections
of Short circuit / Overload / Overvoltage / Over
temperature. Cooling by free air convection.
All-In-One DC-UPS, battery based. Ultra Ca-
pacitor DC-UPS, no battery required. World-
wide approvals. 3 year warranty.
Altech’s line of Motor Disconnect Switches are
UL 508 listed as Manual Motor Controllers for
AC Motor Starting Across-the-line and AC
General use. This new 16 page catalog in-
cludes the 3 different handle designs, which
are all available in gray/black or yellow/red
housings. Electrical ratings are 25-150A /
600V. The switches are non-fused DIN Rail
mountable. Neat features include: snap-on
auxiliary switches, door mounting kit and a
retrofit 30A fuse holder. Also featured are En-
closed Motor Disconnect Switches & Fused
Enclosed Motor Disconnect Switch (30A) in
plastic or stainless housings.
Altech Corp.®
35 Royal Rd., Flemington, NJ 08822
908-806-9400
Altech Corp.®
35 Royal Rd., Flemington, NJ 08822
908-806-9400
www.altechcorp.com
www.altechcorp.com
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490
135
Altech Corporation
35 Royal Road
Flemington, NJꢀ08822-6000
P 908.806.9400 • F 908.806.9490
www.altechcorp.com
Altech Corp.® 310-032017-3K
Printed March 2017
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
VISHAY
©2020 ICPDF网 联系我们和版权申明