Electronic Components Datasheet Search
English 中文版
Manufacturer Upload
Part Name:
DIFFCLK_1N Cyclone III Device Handbook
Prototype PCB
Part No.:   DIFFCLK_1N
Download: Download   Right selection Save Target As
View Datasheet (Html)   No need to install PDF reader software
Description:   Cyclone III Device Handbook
File Size :   7302 K    
Page : 274 Pages
Maker   ALTERA [ ALTERA CORPORATION ]http://www.altera.com
Buy Now :   
  DIFFCLK_1N Datasheet PDF page 25 DIFFCLK_1N Datasheet PDF page 26 DIFFCLK_1N Datasheet PDF page 27 DIFFCLK_1N Datasheet PDF page 28 DIFFCLK_1N Datasheet PDF page 30 DIFFCLK_1N Datasheet PDF page 31 DIFFCLK_1N Datasheet PDF page 32 DIFFCLK_1N Datasheet PDF page 33  
Chapter 2: Logic Elements and Logic Array Blocks in the Cyclone III Device Family
LE Operating Modes
In addition to the three general routing outputs, LEs in a LAB have register chain
outputs, which allows registers in the same LAB to cascade together. The register
chain output allows the LUTs to be used for combinational functions and the registers
to be used for an unrelated shift register implementation. These resources speed up
connections between LABs while saving local interconnect resources.
LE Operating Modes
Cyclone III device family LEs operate in the following modes:
Normal mode
Arithmetic mode
LE operating modes use LE resources differently. In each mode, there are six available
inputs to the LE. These inputs include the four data inputs from the LAB local
interconnect, the LE carry-in from the previous LE carry-chain, and the register chain
connection. Each input is directed to different destinations to implement the desired
logic function. LAB-wide signals provide clock, asynchronous clear, synchronous
clear, synchronous load, and clock enable control for the register. These LAB-wide
signals are available in all LE modes.
The Quartus
II software automatically chooses the appropriate mode for common
functions, such as counters, adders, subtractors, and arithmetic functions, in
conjunction with parameterized functions such as the library of parameterized
modules (LPM) functions. You can also create special-purpose functions that specify
which LE operating mode to use for optimal performance, if required.
Normal Mode
Normal mode is suitable for general logic applications and combinational functions.
In normal mode, four data inputs from the LAB local interconnect are inputs to a
four-input LUT (Figure
The Quartus II Compiler automatically selects the
carry-in (cin) or the
signal as one of the inputs to the LUT. LEs in normal mode
support packed registers and register feedback.
shows LEs in normal mode.
Figure 2–2. Cyclone III Device Family LEs in Normal Mode
Register Chain
Connection sload
Packed Register Input
cin (from cout
of previous LE)
Row, Column, and
Direct Link Routing
Row, Column, and
Direct Link Routing
clock (LAB
ena (LAB
aclr (LAB
Local Routing
Register Bypass
Register Feedback
Chain Output
December 2011
Altera Corporation
Cyclone III Device Handbook
Volume 1
Home - IC Supply - Link
Copyright© 2001 - 2014 ICPDF All Rights Reserved ICPDF.COM

粤公网安备 44030402000629号