88-569729-35R_技术文档

®

Amphenol Cylindrical Connectors

for Printed Circuit Board Applications

Amphenol provides three popular connector series with PC tail contacts. The following key

points give a quick overview of these series. For more detail, there are series catalogs avail-

able as listed below*. Go to www.amphenol-aerospace.com to view and download these

catalogs. There is a guide to selecting a cylindrical connector with printed circuit board con-

tacts on the following page to assist you further.

MIL-DTL-38999 CONNECTORS, METAL & COMPOSITE

• Lightweight, compact, high density and high reliability cylindrical

• Operating voltage to 900 VAC (RMS) at sea level

• Environmentally resistant

38999 Series III Box Mount Connector

with PC Tails

• Solder or crimp rear release contacts in mating plug

• Series I (LJT) - Bayonet coupling

• Scoop-proof (recessed pins) offers maximum contact

protection

•

Series II (JT) - Bayonet coupling

• For applications requiring maximum weight/space

savings and reliability

• Series III (Tri-Start) - Threaded, quick coupling in one

complete turn

• Designed for general duty as well as severe environmental

applications

Special 38999 Connector with

Stand-off Shell and

PC Tails

38999 Series III Connector with a Special

Configuration Composite Shell and PC

Tails

• Superior EMI shielding with grounding fingers and

metal-to-metal mating

• Filter/Transient protection versions available

• Scoop-proof contact protection

• Stainless steel firewall versions, and composite versions

MIL-C-26482 CONNECTORS

• Medium size, widely used cylindrical

• Operating voltage to 1,000 VAC (RMS) at sea level

• Series 1 (PT) - Bayonet coupling - most commonly used in PCB

applications

• Environmentally resistant

• Solder or crimp front and rear release contacts in mating plug

Black/green zinc alloy plating (cadmium-free) available

26482 Series 1 Jam Nut

Connector with PC Tails

5015 Box Mount Connector

with PC Tails

MIL-5015 CONNECTORS

• Medium–heavy weight, time-tested cylindrical

• Operating voltage to 1,500 VAC (RMS) at sea level

• Environmentally resistant or general duty

• Threaded coupling

• Solder or crimp rear insertion contacts in mating plug

• Black/green zinc alloy plating (cadmium-free) available

Also provided in this catalog are several additional product options for the

designer of PCB board applications. For example: Amphenol’s flex assemblies

provide solutions for attachment to PCB boards where a self-locking terminal

pad is needed or in tight-fitting space requirements. Connectors with compliant

pin contacts are available, and pc tails within shielded coax, twinax and triax

contacts are available. At the end of the catalog, see a brief description of

Amphenol PCB rectangular connectors, backplane assemblies, terminal blocks

and wiring interface modules.

Flex Termination with MIL-C-26482 Special Con-

nector

* Request Catalog 12-090 for MIL-DTL-38999 Series I, II

Request Catalog 12-092 for MIL-DTL-38999 Series III

Request Catalog 12-070 for MIL-C-26482, Series 1, 2

Request Catalog 12-071 for Matrix MIL-C-26482 Series 2

Request Catalog 12-020 for MIL-5015

Go to www.amphenol-aerospace for catalogs online.

Note: MIL-DTL-38999 supersedes MIL-C-38999.

1

Guide to Selecting a PCB Cylindrical

Connector

The connector selection process is one of the most important engineering deci-

sions to be made in any electronic application. Amphenol has created this cat-

alog specifically to provide the necessary information to select, layout and

design both the appropriate Amphenol^®cylindrical connector with PCB con-

tacts and the connector footprint (contact locations) on the printed circuit

board. The guide that follows is for application of cylindrical connectors on rigid

printed circuit boards and also applies if a flex print assembly or other optional

is being used.

Engineers working on those PCB or flex print applications requiring rectangular

connectors are encouraged to refer to page 46-48 and ask for Amphenol Rect-

angular Product catalogs.

How To Select a Cylindrical Connector for a PCB Application

The data provided in this catalog is based on three cylindrical connector series:

MIL-DTL-38999 Series I, II and III, MIL-C-26482 Series 1, and MIL-C-5015.

See page 1 for electrical and environmental features and differences of these

three series. The “hot” side of the application determines the choice of pin or

socket genders of the contacts.

How to Measure the PCB Tail Length

The tail length of the PCB is the portion of the contact that extends beyond the

rear of the shell. This length will vary in relationship to the mounting flange,

depending on the series of connector selected. Standard lengths are shown on the connector shell style

drawings in this

catalog. These shell style drawing pages also provide how to order part numbering for standard PCB cylin-

drical connectors.

When computing the desired tail length, it is important to take into consideration the following factors:

•

The connector series and shell style.

The mounting style of the receptacle; jam nut (D hole) or panel mount (four holes).

This can affect the overall length of the tail.

•

The extension of the tail beyond the opposite side of the board or the flex.

The space required to adequately clean flux from between the board or flex and the rear

of the connector shell. Connectors that are mounted flush against the board may trap

soldering flux which could lead to corrosion of the solder joints.

Would Alignment Discs, Headers or

Special Stand-off Shells be Beneficial?

Stand-off Adapter on a Jam Nut

Receptacle.

Any mechanical methods needed to stabilize the

board or flex to the connector and/or the panel.

The PCB tails shown in this catalog are of one

diameter. Stepped tails or PCB tails with an

increased diameter on a designated portion may

be required for certain applications.

Alignment discs are available which provide ease

of alignment of pins to boards, protection during

shipment and optimized electrical circuit separa-

tion. Header assemblies (see pages 44 & 45) are

available which provide time and cost saving

potentials. Standoffs may be required for certain

applications. Amphenol has developed a new

stand-off adapter (see page 40) which may elimi-

nate the need for special stand-off shell designs.

Connectors with clinch nuts can be provided.

Please call Amphenol to discuss any optional

designs or any special requirements.

Special Design with Longer PC Tails in

a 38999 Composite Shell Connector.

Also shows an Alignment Disc.

Universal Header Assemblies are available

for Flex Print/PC Board Mounting. Beneficial

especially when electrical testing of the con-

nector requires it to be removed and reat-

tached.

2

Guide to Selecting a PCB Cylindrical

Connector, cont.

What Determines the Diameter of the PCB Tail?

The outside diameter of the PCB tail is determined by the inside diameter of the plated through-hole on

the board or flex print. The standard or most popular diameters are shown in the chart on the next page

and are called out in the connector illustrations in this catalog (Pgs. 26-37).

Standard diameters of PCB tails

Connector Series

MIL-DTL-38999

MIL-C-26482

MIL-5015

Size 16 Contact

.062 ±.001

Size 20 Contact

.019 ±.001

Size 22D Contact

.019 ±.001

.030 ±.001

Not available

.030 ±.001

Not available

For availability of other contact diameters, consult Amphenol, Sidney NY.

Should PCB Tails be Gold Plated or Pre-tinned?

The standard PCB tails for MIL-DTL-38999 and MIL-C-26482 receptacles

have gold plating, .00050 inches over nickel. PCB tails for MIL-C-5015

receptacles are plated with silver, .00010 inches over copper. Amphenol

can substitute a pre-tinned version of these tails to facilitate the termination

process. This pre-tinning is a 60/40 lead-tin alloy. Call Amphenol for further

information on pre-tinning and any other plating of contacts not covered in

this catalog.

Would Flex Assemblies be Necessary or Beneficial for the

Application?

Flex print can radically simplify the assembly of a connector to a system, as

well as eliminate wiring errors. Amphenol offers connector flex assemblies

through ACT, Advanced Circuit Technologies division. Features and bene-

fits of using flex technology include:

Flex Termination for Attachment to PC Boards

•

Available for MIL-DTL-38999 (including filter EMI/EMP types),

MIL-5015 and MIL-C-26482 cylindrical connectors

•

Sculptures^®Flexible Circuits with built-in terminations

Eliminates failures associated with crimped or solder-on contacts

Geometrically fit tight space requirements and create a self-locking

terminal pad

Should Other PC Tail Contact Types be Considered?

Press-Fit Connectors with compliant pins are available which engage

the plated through-holes in the board without the need for soldering.

This optional contact style offers the following benefits

Compliant Pin Contacts in a Bayo-

net 38999 Catalog

•

Easy board repairability

Improved board processing time

Excellent temperature performance

Ideal for low-lead applications

For more information on Press-Fit connectors with compliant pins refer

to Amphenol data sheet #188.

Special Quadrax contacts have been designed with PC tails. Coax, twi-

nax and triax contacts can also have PC tails. Refer to Amphenol cata-

log 12-130. Go online at www.amphenol-aerospace.com or consult

Amphenol Aerospace for further information.

Quadrax PC Tail Contacts

Combined with Standard PC

Tail Contacts

Quadrax Contacts with PC

Tails in a 38999 Connector with

Special Stand-off Shell

3

Cylindrical Connectors with PCB contacts

insert availability

The following table lists the most commonly used insert arrangements for printed circuit board application of

MIL-DTL-38999, MIL-C-26482 and MIL-C-5015 cylindrical connectors. This represents the most readily avail-

able patterns within these series. See illustrations of these selected patterns on the following pages. If you

require other arrangements than what are shown here, consult Amphenol for further availability.

MIL-DTL-38999

Contact Size*

JT

Series II

LJT

Series I

Tri-Start

Series III

Service

Rating

Total

Contacts

MIL-C-26482

8-3

MIL-5015

10SL-3

22D

20

3

16

8-3

9-3

M/I

3

6

8-35

8-98

9-35

9-98

9-35

9-98

M

6

8-98

I

3

A

3

10-5

11-5

11-6

11-5

10-5

10-6

I

5

6

I

6

10-35

12-3

11-35

13-3

11-35

M

13

3

13

22

12-3

II

3

6

12-10

I

10

22

6

10

12-35

13-35

M

14S-6

Inst.

14-18

14-19

14-35

15-18

15-19

15-35

15-18

15-19

15-35

14-18

14-19

I

18

19

37

7

18

19

I

M

37

55

16S-1

18-1

A

7

16-26

16-35

17-26

17-35

17-26

17-35

16-26

I

26

55

10

11

32

66

13

27

79

41

19

100

55

16

24

31

128

61

35

26

32

M

A/Inst.

10

11

18-11

18-32

18-35

19-11

19-32

19-35

19-11

19-32

19-35

18-11

18-32

II

I

M

66

79

20-11

22-14

Inst.

13

19

20-27

20-35

20-41

21-27

21-35

21-41

20-27

20-41

I

M

I

27

41

21-35

21-41

A

M

I

22-35

22-55

23-35

23-55

23-35

23-55

100

22-55

55

61

24-5

A

Inst.

I

16

24

31

24-28

24-31

24-35

24-61

24-31

24-61

25-35

25-61

25-35

25-61

M

I

128

28-15

A

35

* For information on size 12 PC tail contacts consult Amphenol Aerospace.

4

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #8-3 / 9-3

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Series II

8-3

Series I

9-3

Series III

NA

Series 1 & 2

8-3

MIL-5015

NA

Number of

Contacts

Contact

Size

Service

Rating*

Front face of pin insert shown

3

20

M/I

.018

.079

C

A

B

.056

*Service Rating: M for MIL-DTL-38999

I for MIL-C-26482

.056

Insert Arrangement #8-35 /9-35

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Series II

Series I

Series III

Series 1 & 2

MIL-5015

NA

8-35

9-35

NA

Number of

Contacts

Contact

Size

Service

Rating

Front face of pin insert shown

6

22D

M

.045

.078

.045

1

2

5

6

4

3

.090

.078

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for PCB applications.

For availability of other arrangements, consult Amphenol Corp., Sidney, NY.

5

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #8-98 / 9-98

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Series II

8-98

Series I

9-98

Series III

9-98

Series 1 & 2

8-98

MIL-5015

NA

Number of

Contacts

Contact

Size

Service

Rating

Front face of pin insert shown

3

20

I

.038

.075

A

B

C

.065

Insert Arrangement #10SL-3

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Series II

Series I

Series III

Series 1 & 2

MIL-5015

10SL-3

NA

Number of

Contacts

Contact

Size

Service

Rating

Front face of pin insert shown

3

16

A

.053

C

A

B

.105

.091

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for PCB applications.

For availability of other arrangements, consult Amphenol Corp., Sidney, NY.

6

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #10-5 / 11-5

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Series II

10-5

Series I

11-5

Series III

11-5

Series 1 & 2

10-5

MIL-5015

NA

Number of

Contacts

Contact

Size

Service

Rating

Front face of pin insert shown

5

20

I

.065

.056

.130

A

E

D

B

C

.065

.113

Insert Arrangement #10-6 / 11-6

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Series II

Series I

Series III

Series 1 & 2

MIL-5015

NA

11-6

NA

10-6

Number of

Contacts

Contact

Size

Service

Rating

Front face of pin insert shown

6

20

I

.130

.065

A

B

F

C

D

E

.065

.130

.113

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for PCB applications.

For availability of other arrangements, consult Amphenol Corp., Sidney, NY.

7

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #10-35 / 11-35

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Series II

10-35

Series I

11-35

Series III

11-35

Series 1 & 2

NA

MIL-5015

NA

Number of

Contacts

Contact

Size

Service

Rating

Front face of pin insert shown

13

22D

M

.138

.085

.118

.146

.056

.146

1

10

11

13

2

3

9

12

4

8

7

5

6

.045

.035

.118

.049

Insert Arrangement #12-3 / 13-3

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Series II

Series I

Series III

Series 1 & 2

MIL-5015

NA

12-3

13-3

NA

12-3

Number of

Contacts

Contact

Size

Service

Rating

Front face of pin insert shown

3

16

II

.058

C

A

B

.111

.094

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for PCB applications.

For availability of other arrangements, consult Amphenol Corp., Sidney, NY.

8

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #12-10

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Series II

NA

Series I

NA

Series III

NA

Series 1 & 2

12-10

MIL-5015

NA

Number of

Contacts

Contact

Size

Service

Rating

Front face of pin insert shown

10

20

I

.065

A

E

B

C

H

G

K

J

D

F

.120

.130

.195

Insert Arrangement #12-35 / 13-35

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Series II

Series I

Series III

Series 1 & 2

MIL-5015

NA

12-35

13-35

NA

Number of

Contacts

Contact

Size

Service

Rating

Front face of pin insert shown

.182

.126

22

22D

M

.107

.117

.088

.158

.045

.197

.026

.075

.120

1

21

11

.030

.093

.203

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for PCB applications.

For availability of other arrangements, consult Amphenol Corp., Sidney, NY.

9

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #14S-6

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Series II

NA

Series I

NA

Series III

NA

Series 1 & 2

NA

MIL-5015

14S-6

Number of

Contacts

Contact

Size

Service

Rating

Front face of pin insert shown

6

16

Inst.

A

.160

F

E

B

C

.080

D

.138

Insert Arrangement #14-18 / 15-18

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Series II

Series I

Series III

Series 1 & 2

MIL-5015

NA

14-18

15-18

14-18

Number of

Contacts

Contact

Size

Service

Rating

Front face of pin insert shown

18

20

I

.260

.113

.252

L

A

K

M

N

B

T

U

P

E

J

C

S

R

H

D

G

F

.113

.225

.065

.130

.065

.130

.195

All dimensions for reference only. For alternate rotations see pages 25 & 26

Note: Shown in this catalog are the most common insert patterns for PCB applications.

For availability of other arrangements, consult Amphenol Corp., Sidney, NY.

10

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #14-19 / 15-19

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

14-19

Series I

15-19

Series III

15-19

Series 1 & 2

14-19

MIL-5015

NA

19

20

I

Front face of pin insert shown

.065

.225

.113

A

M

B

R

.113

L

N

C

D

K

V

U

J

S

F

T

E

H

G

.130

.195

.260

.130

.225

.195

.260

Insert Arrangement #14-35 / 15-35

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

Series I

Series III

Series 1 & 2

MIL-5015

NA

14-35

15-35

NA

37

22D

M

Contact Hole Locations

Location

Contact Hole Locations

Location

Contact

Number

Front face of pin insert shown

X Axis

+.045

+.123

+.211

+.254

+.266

+.247

+.200

+.130

+.045

–.045

–.130

–.200

–.247

–.266

–.254

–.211

–.123

–.045

+.045

+.123

Y Axis

+.262

+.217

+.160

+.080

–.010

–.098

–.175

–.232

–.262

–.232

–.175

–.098

–.010

+.080

+.160

+.217

+.262

+.172

+.119

Number

X Axis

+.170

+.123

+.045

–.045

–.123

–.170

–.123

–.045

+.045

+.090

+.045

–.045

–.090

–.045

.000

Y Axis

+.040

–.050

–.127

–.172

–.127

–.050

+.040

+.119

+.172

+.074

–.004

–.082

–.004

+.074

–.004

1

2

21

22

3

23

4

24

5

25

1

6

26

7

27

31

21

8

28

9

29

10

11

12

13

14

15

16

17

18

19

20

30

31

11

32

33

34

35

36

37

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for

PCB applications. For availability of other arrangements, consult Amphenol

Corp., Sidney, NY.

11

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #16S-1

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

NA

Series I

NA

Series III

NA

Series 1 & 2

NA

MIL-5015

16S-1

7

16

A

Front face of pin insert shown

.095

.165

F

A

E

G

B

D

C

.190

Insert Arrangement #16-26 / 17-26

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

Series I

Series III

Series 1 & 2

MIL-5015

NA

17-26

16-26

26

20

I

Contact Hole Locations

Location

Contact Hole Locations

Location

Contact

Number

Front face of pin insert shown

X Axis

.000

Y Axis

+.321

+.293

+.214

+.099

–.034

–.161

–.260

–.314

–.260

–.161

–.034

+.099

+.214

Number

X Axis

–.131

–.070

+.070

+.175

+.178

+.119

.000

Y Axis

+.293

+.177

+.094

–.036

–.151

–.203

–.151

–.036

+.094

+.065

–.065

A

B

C

D

E

F

R

S

T

+.131

+.239

+.305

+.319

+.278

+.189

+.067

–.067

–.189

–.278

–.319

–.305

–.239

U

V

W

X

Y

Z

A

B

R

T

G

H

J

C

E

P

S

U

V

a

Z

–.119

–.178

–.175

.000

b

D

N

K

L

a

c

M

W

Y

b

X

H

F

L

M

N

P

c

.000

K

G

J

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for

PCB applications. For availability of other arrangements, consult

Amphenol Corp., Sidney, NY.

12

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #16-35 / 17-35

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

16-35

Series I

17-35

Series III

17-35

Series 1 & 2

NA

MIL-5015

NA

55

22D

M

Contact Hole Locations

Location

Contact Hole Locations

Location

Contact

Number

Front face of pin insert shown

X Axis

–.312

–.242

–.234

–.172

–.156

–.089

–.078

.000

Y Axis

+.086

–.004

–.094

+.221

+.131

+.041

–.049

–.139

–.229

+.279

+.176

+.086

–.004

–.094

–.184

–.274

+.316

+.221

+.131

+.041

–.049

–.139

–.229

–.319

+.329

+.176

+.086

–.004

–.094

–.184

–.274

Number

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

X Axis

+.089

+.078

+.172

+.156

+.242

+.234

+.312

Y Axis

+.316

+.221

+.131

+.041

–.049

–.139

–.229

–.319

+.279

+.176

+.086

–.004

–.094

–.184

–.274

+.221

+.131

+.041

–.049

–.139

–.229

+.086

–.004

–.094

1

2

3

4

5

6

17

10

7

32

25

40

8

4

47

53

9

1

3

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

55

52

9

16

46

31

24

39

.000

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for PCB applications.

For availability of other arrangements, consult Amphenol Corp., Sidney, NY.

13

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #18-1

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating*

Series II

NA

Series I

NA

Series III

NA

Series 1 & 2

NA

MIL-5015

18-1

10

16

A/Inst.

Front face of pin insert shown

.095

H

A

I

G

B

F

J

C

D

E

.240

* Contact Locations B, C, F, G are Service Rating A.

All other contact locations are Service Rating Inst.

.100

Insert Arrangement #18-11 / 19-11

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

Series I

Series III

Series 1 & 2

MIL-5015

NA

18-11

19-11

18-11

11

16

II

Front face of pin insert shown

.250

.105

A

.105

.260

.132

J

B

H

K

L

C

G

F

D

.092

E

.053

.281

.215

.179

.275

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for

PCB applications. For availability of other arrangements, consult

Amphenol Corp., Sidney, NY.

14

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #18-32 / 19-32

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

18-32

Series I

19-32

Series III

19-32

Series 1 & 2

18-32

MIL-5015

NA

32

20

I

Contact Hole Locations

Location

Contact Hole Locations

Location

Contact

Letter

Front face of pin insert shown

X Axis

+.066

+.189

+.286

+.345

+.357

+.321

+.242

+.130

.000

Y Axis

+.353

+.305

+.217

+.098

–.033

–.160

–.265

–.335

–.359

–.335

–.265

–.160

–.033

+.098

+.217

+.305

+.353

+.230

Letter

X Axis

+.124

+.209

+.228

+.174

+.065

–.065

–.174

–.228

–.209

–.124

.000

Y Axis

+.193

+.095

–.033

–.151

–.221

–.151

–.033

+.095

+.193

+.096

.000

A

B

C

D

E

F

V

W

X

Y

Z

a

b

c

d

e

f

T

A

U

B

S

G

H

J

V

e

R

C

F

f

W

d

D

P

g

K

L

–.130

–.242

–.321

–.357

–.345

–.286

–.189

–.066

.000

j

X

c

N

E

h

Y

M

N

P

R

S

T

g

h

j

+.096

.000

b

M

Z

–.096

.000

a

L

G

J

–.096

K

H

U

Insert Arrangement #18-35 / 19-35

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

Series I

Series III

Series 1 & 2

MIL-5015

NA

18-35

19-35

NA

66

22D

M

Front face of pin insert shown

.357

.279

.201

.360

.315

.270

.225

.180

.135

.123

.045

23 34

43

17

51

10

58

4

.090

.045

64

66

1

3

63

9

16

57

50

24

33

42

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for

PCB applications. For availability of other arrangements, consult

Amphenol Corp., Sidney, NY.

15

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #20-11

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

NA

Series I

NA

Series III

NA

Series 1 & 2

NA

MIL-5015

20-11

13

16

Inst.

Front face of pin insert shown

.138

.159

.239

L

C

B

.102

M

E

F

G

N

H

J

K

A

.080

D

.204

.276

.156

Insert Arrangement #20-27 / 21-27

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

Series I

Series III

Series 1 & 2

MIL-5015

NA

20-27

21-27

NA

20-27

27

20

I

Front face of pin insert shown

.400

.275

.100

.225

.125

.150

.225

.275

.375

.400

A

B

S

R

P

C

a

b

N

D

T

Z

d

c

E

Y

M

U

F

L

V

X

K

W

H

G

.300

J

.200

.400

.100

.150

.250

.050

.150

.025

.375

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for

PCB applications. For availability of other arrangements, consult

Amphenol Corp., Sidney, NY.

16

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #20-35 / 21-35

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

20-35

Series I

21-35

Series III

21-35

Series 1 & 2

NA

MIL-5015

NA

79

22D

M

Contact Hole Locations

Location

Contact Hole Locations

Location

Front face of pin insert shown

Contact

Number

Contact

X Axis

+.365

+.306

+.232

+.146

+.053

–.053

–.146

–.232

–.306

–.365

–.406

–.427

–.406

–.365

–.306

–.232

–.146

–.053

.000

Y Axis

–.227

–.302

–.362

–.404

–.426

–.404

–.362

–.302

–.227

–.141

–.048

+.048

+.141

+.227

+.302

+.362

+.404

+.426

+.323

+.322

+.280

+.220

+.141

+.048

–.048

–.141

–.220

–.280

–.322

–.347

–.322

–.280

–.220

–.141

Number

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

X Axis

–.332

–.311

–.258

–.184

–.098

–.048

+.048

+.134

+.208

+.237

+.208

+.134

+.048

–.048

–.134

–.208

–.237

–.208

–.134

–.048

+.048

+.125

+.155

+.125

+.048

–.048

–.125

–.155

–.125

.000

Y Axis

–.048

+.048

+.141

+.220

+.280

+.322

+.241

+.199

+.139

+.048

–.048

–.139

–.199

–.241

–.199

–.139

–.048

+.048

+.139

+.199

+.146

+.090

.000

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

1

31

51

79

21

71

61

41

11

+.098

+.184

+.258

+.311

+.332

+.311

+.258

+.184

+.098

.000

Contact Hole Locations

Location

Contact

Number

X Axis

+.053

+.146

+.232

+.306

+.365

+.406

+.427

+.406

Y Axis

+.426

+.404

+.362

+.302

+.227

+.141

+.048

–.048

–.141

–.090

–.146

–.090

.000

1

2

3

4

5

6

7

8

9

–.098

–.184

–.258

–.311

+.090

+.053

–.029

+.048

–.048

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for PCB applications.

For availability of other arrangements, consult Amphenol Corp., Sidney, NY.

17

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #20-41 / 21-41

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

20-41

Series I

21-41

Series III

21-41

Series 1 & 2

20-41

MIL-5015

NA

41

20

I

Front face of pin insert shown

A

W

B

V

j

C

Z

U

X

k

Y

D

i

T

m

s

E

a

h

S

t

r

F

b

n

R

P

g

p

G

q

f

c

d

H

N

e

J

M

K

L

.300 DIA.

.567 DIA.

.835 DIA.

Insert Arrangement #22-14

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

Series I

Series III

Series 1 & 2

MIL-5015

22-14

NA

19

16

A

.392

.196

Front face of pin insert shown

.336

M

N

L

A

U

B

C

D

K

P

J

T

V

R

H

S

.168

F

E

G

.098

.294

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for

PCB applications. For availability of other arrangements, consult

Amphenol Corp., Sidney, NY.

18

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #22-35 / 23-35

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

22-35

Series I

23-35

Series III

23-35

Series 1 & 2

NA

MIL-5015

NA

100

22D

M

Contact Hole Locations

Location

Contact Hole Locations

Location

Contact

Number

Front face of pin insert shown

X Axis

–.249

–.166

–.083

.000

Y Axis

+.095

.000

Number

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

X Axis

+.083

+.166

+.249

+.332

+.428

+.467

+.488

+.415

+.488

+.428

Y Axis

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

.000

–.095

–.190

–.285

–.380

–.475

+.428

+.333

+.238

+.143

+.048

–.047

–.142

–.237

–.332

–.427

+.380

+.285

+.190

+.095

.000

–.095

–.190

–.285

–.380

+.428

+.333

+.238

+.143

+.048

–.047

–.142

–.237

–.332

–.427

+.475

+.380

+.285

+.190

+.095

.000

56

35

25

67

4 6

77

16

8

86

1

94

2

95

97

3

5

96

98

4

99

6

7

100

15

93

2 4

85

5 5

3 4

76

4 5

66

Contact Hole Locations

Location

–.095

–.190

–.285

–.380

+.333

+.238

+.143

+.048

–.047

–.142

–.237

–.332

+.241

+.154

+.061

.000

Contact

Number

–.095

–.190

–.285

–.380

–.475

+.428

+.333

+.238

+.143

+.048

–.047

–.142

–.237

–.332

–.427

+.475

+.380

+.285

+.190

+.095

X Axis

–.428

–.467

–.488

–.415

–.488

–.428

–.332

–.249

Y Axis

+.241

+.154

+.061

.000

1

2

3

4

5

–.061

–.142

–.237

+.333

+.238

+.143

+.048

–.047

–.142

–.237

–.332

+.380

+.285

+.190

.000

6

.000

7

.000

8

.000

9

.000

10

11

12

13

14

15

16

17

18

.000

+.083

–.061

–.142

–.237

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for PCB applications.

For availability of other arrangements, consult Amphenol Corp., Sidney, NY.

19

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #22-55 / 23-55

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

22-55

Series I

23-55

Series III

23-55

Series 1 & 2

22-55

MIL-5015

NA

55

20

I

Front face of pin insert shown

.325

.260

A

U

T

B

V

p

n

C

W

q

S

k

m

X

r

Y

.455

AA

GG

FF

.390

D

R

P

z

y

x

g

BB

CC

j

i

Z

a

E

F

HH

s

t

DD

N

EE

v

w

b

h

u

c

M

G

d

f

.195

.130

L

e

H

J

K

.065

.112

.225

.336

.450

Insert Arrangement #24-5

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

Series I

Series III

Series 1 & 2

MIL-5015

24-5

NA

16

A

Front face of pin insert shown

.035

.067

.238

.137

.340

A

B

C

E

D

G

H

F

L

K

J

N

M

R

P

.168

S

.270

.371

.352

.176

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for

PCB applications. For availability of other arrangements, consult

Amphenol Corp., Sidney, NY.

20

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #24-28

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

NA

Series I

NA

Series III

NA

Series 1 & 2

NA

MIL-5015

24-28

24

16

Inst.

Front face of pin insert shown

.356

.089

.178

.308

B

A

.154

D

C

E

R

J

F

H

G

P

Z

L

N

Y

K

M

X

Q

T

S

V

U

W

.267

.445

Insert Arrangement #24-31 / 25-31

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

Series I

Series III

Series 1 & 2

MIL-5015

NA

24-31

NA

24-31

31

16

I

Front face of pin insert shown

M

A

L

N

a

B

Z

f

P

.455

.364

Y

Q

b

K

C

D

g

d

X

R

e

c

J

.182

.273

W

S

V

T

.091

H

U

E

G

F

.158

.474

.316

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for

PCB applications. For availability of other arrangements, consult

Amphenol Corp., Sidney, NY.

21

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #24-35 / 25-35

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

24-35

Series I

25-35

Series III

25-35

Series 1 & 2

NA

MIL-5015

NA

128

22D

M

Contact Hole Locations

Location

X Axis

Location

X Axis

Contact

Number

Contact

Number

Front face of pin insert shown

Y Axis

+.190

+.095

.000

Y Axis

–.190

–.285

–.380

–.475

+.531

+.427

+.332

+.237

+.142

+.047

–.047

–.142

–.237

–.332

–.427

–.522

+.496

+.380

+.285

+.190

+.095

.000

–.095

–.190

–.285

–.380

–.475

+.444

+.332

+.237

+.142

+.047

–.047

–.142

–.237

–.332

–.427

+.357

+.190

+.095

.000

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

–.249

–.160

–.166

–.083

.000

78

79

80

+.083

+.160

+.166

+.249

+.332

+.424

+.415

+.424

+.479

+.520

+.546

+.555

+.546

+.520

+.479

59

–.095

–.190

–.285

–.380

–.475

+.531

+.427

+.332

+.237

+.142

+.047

–.047

–.142

–.237

–.332

–.427

–.522

+.475

+.380

+.285

+.190

+.095

.000

81

82

83

48

71

36

25

82

94

15

8

115

105

1

4

84

85

86

87

88

89

125

90

91

92

7

121

14

93

94

95

24

114

70

104

35

81

58

47

93

96

97

98

Contact Hole Locations

99

Location

X Axis

Contact

Number

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

Y Axis

+.279

+.190

+.095

.000

–.095

–.190

–.279

+.357

+.190

+.095

.000

1

2

–.479

–.520

–.546

–.555

–.546

–.520

–.479

–.424

–.415

–.424

–.332

–.249

3

4

5

–.095

–.190

–.285

–.380

–.475

+.522

+.427

+.332

+.237

+.142

+.047

–.047

–.142

–.237

–.332

–.427

–.555

+.475

+.380

+.285

+.190

+.095

.000

6

7

8

9

.000

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

–.095

–.190

–.357

+.444

+.332

+.237

+.142

+.047

–.047

–.142

–.237

–.332

–.427

+.496

+.380

+.285

.000

–.095

–.190

–.357

+.279

+.190

+.095

.000

–.095

–.190

–.279

+.083

–.095

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for

PCB applications. For availability of other arrangements, consult

Amphenol Corp., Sidney, NY.

22

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #24-61 / 25-61

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

24-61

Series I

25-61

Series III

25-61

Series 1 & 2

24-61

MIL-5015

NA

61

20

I

Contact Hole Locations

Location

Contact Hole Locations

Location

Front face of pin insert shown

Contact

Number

Contact

Number

X Axis

+.196

+.314

+.413

+.485

+.527

+.536

+.511

+.454

+.368

+.259

+.134

.000

Y Axis

+.500

+.435

+.343

+.230

+.101

–.030

–.164

–.287

–.391

–.470

–.519

–.537

–.519

–.470

–.391

–.287

–.164

–.030

+.101

+.230

+.343

+.435

+.500

+.454

+.363

+.283

+.175

+.046

–.088

X Axis

+.341

+.251

+.133

.000

Y Axis

–.213

–.314

–.379

–.402

–.379

–.314

–.213

–.088

+.046

+.175

+.283

+.363

+.338

+.223

+.122

–.010

–.139

–.233

–.267

–.233

–.139

–.010

+.122

+.223

+.200

+.094

–.041

–.132

–.041

+.094

.000

A

B

C

D

E

F

G

H

J

h

i

j

k

m

n

–.133

–.251

–.341

–.392

–.399

–.362

–.285

–.173

.000

A

b

p

Z

a

B

Y

q

v

c

C

X

u

r

w

GG

D

E

F

W

HH

t

d

K

L

M

N

P

R

S

T

U

V

W

X

Y

Z

a

s

x

FF

EE

NN

JJ

PP

V

U

e

s

t

y

KK

z

u

MM

DD

r

f

LL

BB

–.134

–.259

–.368

–.454

–.511

–.536

–.527

–.485

–.413

–.314

–.196

–.068

+.068

+.173

+.285

+.362

+.399

+.392

v

T

G

H

g

q

w

+.147

+.237

+.267

+.228

+.131

.000

CC

AA

S

h

p

x

J

R

i

y

k

P

m

M

j

K

N

z

L

AA

BB

CC

DD

EE

FF

GG

HH

JJ

KK

LL

MM

NN

PP

–.131

–.228

–.267

–.237

–.147

.000

b

c

+.105

+.135

.000

d

e

f

–.135

–.105

.000

g

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for PCB applications.

For availability of other arrangements, consult Amphenol Corp., Sidney, NY.

23

Cylindrical Connectors with PCB contacts

insert arrangements, cont.

Insert Arrangement #28-15

JT

LJT

Tri-Start

Connector Type:

Insert Designation:

Contact Locations

MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999 MIL-C-26482

Number of

Contacts

Contact

Size

Service

Rating

Series II

NA

Series I

NA

Series III

NA

Series 1 & 2

NA

MIL-5015

28-15

35

16

A

Front face of pin insert shown

.552

.460

.368

.276

.092

.229

B

F

A

E

C

R

G

V

D

K

N

c

L

H

.070

.089

J

M

.547

.388

W

P

S

T

U

X

Y

j

a

Z

b

k

.407

.509

g

e

f

d

h

.248

l

m

.106

.184

All dimensions for reference only. For alternate rotations see pages 25 & 26.

Note: Shown in this catalog are the most common insert patterns for PCB applications.

For availability of other arrangements, consult Amphenol Corp., Sidney, NY.

24

Cylindrical Connectors with PCB contacts

alternate positioning available

for MIL-DTL-38999 connectors

To avoid cross-plugging problems in applications requiring the use of more than one connector of the same series, size and arrange-

ment, alternate rotations are available as indicated in the accompanying charts.

In MIL-DTL-38999 Series I, II and III connectors the rotation is based on rotating the master key/keyway in the connector shell.

A plug with a given rotation letter will mate with a receptacle with the same rotation letter. Only the master key/keyway rotates in the

shell, and the insert always remains in the same position relative to the minor keys. Refer to diagrams below for each connector series.

LJT (MIL-DTL-38999 Series I) KEY/KEYWAY ROTATION

AB ANGLE OF ROTATION (Degrees)

Shell

NORMAL

Size

Normal°

A°

77

81

75

74

77

80

B°

C°

D°

A

D

9

95

–

113

109

115

116

113

110

C

B

ROTATION

LETTERS

11

13

15

17

19

21

23

25

95

67

63

61

65

69

123

127

129

125

121

AB

95

LJT & JT CONNECTORS

ALTERNATE ROTATION CROSS

REFERENCE LETTERS

95

5 LJT REF

˚

95

Pins in

Alternate

Rotations

Sockets in

Alternate

Rotations

95

RELATIVE POSSIBLE POSITION

OF ROTATED MASTER KEYWAY

(front face of LJT connector receptacle shown)

JT (MIL-DTL-38999 Series II) KEY/KEYWAY ROTATION

PA = E

PB = R

PC = W

PD = Y

SA = F

SB = T

SC = X

SD = Z

AB ANGLE OF ROTATION (Degrees)

Shell

Size

Normal°

A°

82

86

80

79

82

85

B°

C°

D°

8

100

–

118

114

120

121

118

115

NORMAL

Explanation:

Use P at end of part number for pin

contacts in Normal position.

Use S at end of part number for

socket contacts in Normal position.

Use cross reference letters given in

chart above for alternate rotations.

A

D

10

12

14

16

18

20

22

24

100

72

68

66

70

74

128

132

134

130

126

C

B

ROTATION

LETTERS

100

AB

100

10 JT REF

˚

100

Tri-Start (MIL-DTL-38999 Series III) KEY/KEYWAY ROTATION

RELATIVE POSSIBLE POSITION

OF ROTATED MASTER KEYWAY

(front face of JT connector receptacle shown)

Key & Keyway

Arrangement

Identification Letter

TRI-START CONNECTORS

ALTERNATE ROTATION CROSS

REFERENCE LETTERS

Shell

Size

AR°

BSC

BR°

BSC

CR°

BSC

DR°

BSC

N

A

B

C

D

E

N

A

B

C

D

E

N

A

B

C

D

E

N

A

B

C

D

E

105

102

80

140

132

118

140

155

131

141

156

145

156

146

141

142

170

169

140

145

153

142

170

169

140

145

153

215

248

230

205

234

197

208

182

195

220

176

184

196

200

180

197

196

200

180

197

265

320

312

275

304

240

236

292

252

255

298

242

293

310

244

257

280

272

293

310

244

257

280

272

Pins in

Alternate

Rotations

Sockets in

Alternate

Rotations

MAIN

KEYWAY

9

35

PA = G

PB = I

SA = H

SB = J

SC = L

SD = N

SE = T

64

91

PC = K

PD = M

PE = R

AR

BSC

95

˚

113

90

11, 13,

and 15

BR

BSC

˚

53

Explanation:

Use P at end of part number for pin

contacts in Normal position.

Use S at end of part number for

socket contacts in Normal position.

Use cross reference letters given in

chart above for alternate rotations.

119

51

80

DR

BSC

CR

BSC

˚

135

49

17 and

19

RELATIVE POSSIBLE POSITION

OF ROTATED MASTER KEYWAY

(front face of Tri-Start connector receptacle shown)

66

62

79

80

135

49

21, 23,

and 25

66

25

62

79

Cylindrical Connectors with PCB contacts

alternate positioning available

for MIL-C-26482 and MIL-5015 connectors

To avoid cross-plugging problems in applications requiring the use of more than one connector of the same series, size and arrange-

ment, alternate rotations are available as indicated in the accompanying charts.

In MIL-C-26482 and MIL-5015 connectors the rotation is based on rotation of the insert within the connector.

A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The front face of the pin insert is rotated

within the shell in a clockwise direction from the normal shell key. Refer to diagram below for both MIL-C-26482 and MIL-C-5015 con-

nectors.

MIL-C-26482 INSERT ROTATION

Insert Rotation

Degrees

Shell

Size

Insert

Arrangement

A

W

60

–

X

Y

Z

–

B

8

8-3

210

–

A

8

8-98

–

10

14

16

18

20

22

24

10-5

45

15

30

60

85

45

72

90

151

90

180

315

275

222

225

216

255

270

–

Position W

Position X

Position Y

Position Z

14-18

14-19

16-26

18-32

20-41

22-36

24-31

24-61

165

–

338

265

–

RELATIVE POSSIBLE POSITION

OF ROTATED INSERT

(front face of connector receptacle shown)

(MIL-C-26482 and MIL-C-5015)

138

126

144

225

180

288

–

324

MIL-26482 AND MIL-5015

CONNECTORS

ALTERNATE ROTATION CROSS

REFERENCE LETTERS

MIL-5015 INSERT ROTATION

Insert Rotation

Pins in

Alternate Rotations

Sockets in Alternate

Rotations

Degrees

Shell

Size

Insert

Arrangement

PW = G

PX = I

SW = H

SX = J

SY = L

SZ = N

W

–

X

–

Y

–

Z

–

10

14

16

18

20

22

24

28

10SL-3

14S-6

16S-1

18-1

PY = K

PZ = M

–

80

70

–

280

290

–

145

–

215

–

Explanation:

Use P at end of part number for pin contacts in

Normal position.

Use S at end of part number for socket con-

tacts in Normal position.

Use cross reference letters given in chart

above for inserts with alternate rotations.

20-11

22-14

24-28

28-15

80

110

250

280

26

MIL-DTL-38999 Series I Type Connectors

with PCB contacts

LJTPQ00R wall mounting receptacle

(back panel mounting)

L MAX

S

R

.006

.000

.905

(TP)

M

Z

PCB TAIL STICKOUT

R

(TP)

S

N

.062 .001 DIA.

FOR SIZE 16 CONTACTS

.019 .001 DIA.

FOR SIZE 20 & 22D

CONTACTS

V

THREAD

SS

P

T

(4 HOLES)

HOW TO ORDER

•

Order by applicable 88/91 part number in table below.

88 prefix designates olive drab cadmium plated connector shell.

91 prefix designates electroless nickel plated connector shell.

•

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for

pins in normal position, S for sockets in normal position. See page 25 for alternate rota-

tion letter to use.

Example part number: 88-569701-35P designates shell size 9 with a 9-35 insert and pin

contacts in normal position.

•

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

+ .005 DIA

M

Z

M

+.000

–.005

P Max.

Panel

Thickness

S

+.011

–.010

T

V Thread

Class 2A

(Plated)

SS Dia.

+.000

–.016

Size

16 & 20

Contacts

Shell

Size

L

Max.

N

Dia.

R

(TP)

Dia.

±.005

Size 22D

Contacts

Part Number

88/91-569701-XXX

702-XXX

9

11

13

15

17

19

21

23

25

.453

.484

.820

.790

.572

.700

.234

.204

.193

.719

.812

.938

1.031

1.125

1.219

1.312

1.438

1.562

1.688

1.812

.128

.147

.4375-28 UNEF

.5625-24 UNEF

.6875-24 UNEF

.662 .281 – .235 .249 – .188

.810 .281 – .235 .249 – .188

.960 .281 – .235 .249 – .188

703-XXX

.850

.906

704-XXX

.975

.969

.8125-20 UNEF 1.085 .281 – .235 .249 – .188

.9375-20 UNEF 1.210 .281 – .235 .249 – .188

1.0625-18 UNEF 1.317 .281 – .235 .249 – .188

1.1875-18 UNEF 1.442 .281 – .235 .249 – .188

1.3125-18 UNEF 1.567 .281 – .235 .249 – .188

1.4375-18 UNEF 1.692 .281 – .235 .249 – .188

705-XXX

1.100

1.207

1.332

1.457

1.582

1.062

1.156

1.250

1.375

1.500

706-XXX

707-XXX

708-XXX

709-XXX

All dimensions for reference only.

27

MIL-DTL-38999 Series I Type Connectors

with PCB contacts

LJTPQ00R wall mounting receptacle

(back panel mounting) (with clinch nuts)

CONNECTOR WITH CLINCH NUTS

(4 PLACES)

L MAX

S

.006

.000

.905

M

R

(TP)

Z

PCB TAIL STICKOUT

R

(TP)

S

N

.062 .001 DIA.

FOR SIZE 16 CONTACTS

.019 .001 DIA.

FOR SIZE 20 & 22D

CONTACTS

V

T

THREAD

SS

THREAD

CLINCH NUT

P

HOW TO ORDER

•

Order by applicable 88/91 part number in table below.

88 prefix designates olive drab cadmium plated connector shell.

91 prefix designates electroless nickel plated connector shell.

•

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for pins

in normal position, S for sockets in normal position. See page 25 for alternate rotation letter

to use.

Example part number: 88-628701-35P designates shell size 9 with a 9-35 insert and pin

contacts in normal position.

•

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

+ .005 DIA

M

Z

Part Number

with

Clinch Nuts*

M

+.000

–.005

P Max.

Panel

Thickness (TP)

S

+.011

–.010

V Thread

Class 2A

(Plated)

SS Dia.

+.000

–.016

Size

16 & 20

Contacts Contacts

Shell

Size

L

Max.

N

Dia.

R

T

Size 22D

Thread

9

11

13

15

17

19

21

23

25

88/91-628701-XXX

702-XXX

.453

.484

.820

.790

.572

.700

.234

.204

.193

.719

.812

.938

1.031

1.125

1.219

1.312

1.438

1.562

1.688

1.812

.112-40UNC-3B

.4375-28 UNEF

.5625-24 UNEF

.6875-24 UNEF

.662 .281 – .235 .249 – .188

.810 .281 – .235 .249 – .188

.960 .281 – .235 .249 – .188

703-XXX

.850

.906

704-XXX

.975

.969

.8125-20 UNEF 1.085 .281 – .235 .249 – .188

.9375-20 UNEF 1.210 .281 – .235 .249 – .188

705-XXX

1.100

1.207

1.332

1.457

1.582

1.062

1.156

1.250

1.375

1.500

706-XXX

.112-40UNC-3B 1.0625-18 UNEF 1.317 .281 – .235 .249 – .188

.112-40UNC-3B 1.1875-18 UNEF 1.442 .281 – .235 .249 – .188

.138-32UNC-3B 1.3125-18 UNEF 1.567 .281 – .235 .249 – .188

.138-32UNC-3B 1.4375-18 UNEF 1.692 .281 – .235 .249 – .188

707-XXX

708-XXX

709-XXX

All dimensions for reference only.

* Consult Amphenol for more information on ordering connectors with clinch nuts. There is also a 3mm clinch nut available (part number 88/91-628401/409)

28

MIL-DTL-38999 Series I Type Connectors

with PCB contacts

LJTP02R box mounting receptacle

(back panel mounting)

L MAX.

S

.006

.000

.905

R

(TP)

M

Z

PCB TAIL STICKOUT

R

(TP)

KK

N

S

.062 .001 DIA.

FOR SIZE 16 CONTACTS

SS

P

.019 .001 DIA.

FOR SIZE 20 &

22D CONTACTS

T

(4 HOLES)

HOW TO ORDER

•

Order by applicable 88/91 part number in table below.

88 prefix designates olive drab cadmium plated connector shell.

91 prefix designates electroless nickel plated connector shell.

•

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for

pins in normal position, S for sockets in normal position. See page 25 for alternate rota-

tion letter to use.

Example part number: 88-569711-35P designates shell size 9 with a 9-35 insert and pin

contacts in normal position.

•

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

+ .005 DIA

M

Z

M

+.000

–.005

N

+.001

–.005 Thickness

P Max.

Panel

S

+.011

–.010

T

KK Dia. SS Dia.

Size

16 & 20

Contacts

Shell

Size

L

Max.

R

(TP)

Dia.

±.005

+.006

–.005

+.000

–.016

Size 22D

Contacts

Part Number

9

11

13

15

17

19

21

23

25

88/91-569711-XXX .203

712-XXX .203

713-XXX .203

714-XXX .203

715-XXX .203

716-XXX .203

717-XXX .234

718-XXX .234

719-XXX .234

.820

.790

.572

.700

.234

.204

.193

.719

.812

.938

1.031

1.125

1.219

1.312

1.438

1.562

1.688

1.812

.128

.147

.433

.557

.662 .454 – .401 .468 – .406

.810 .454 – .401 .468 – .406

.960 .454 – .401 .468 – .406

1.085 .454 – .401 .468 – .406

1.210 .454 – .401 .468 – .406

1.317 .454 – .401 .468 – .406

1.442 .454 – .401 .468 – .406

1.567 .454 – .401 .468 – .406

1.692 .454 – .401 .468 – .406

.850

.906

.676

.975

.969

.801

1.100

1.207

1.332

1.457

1.582

1.062

1.156

1.250

1.375

1.500

.926

1.032

1.157

1.282

1.407

All dimensions for reference only.

29

MIL-DTL-38999 Series I Type Connectors

with PCB contacts

LJTP02R box mounting receptacle

(back panel mounting) (with clinch nuts)

CONNECTOR WITH CLINCH NUTS

(4 PLACES)

L MAX.

S

.006

.000

.905

R

(TP)

M

Z

PCB TAIL STICKOUT

R

(TP)

KK

N

S

.062 .001 DIA.

FOR SIZE 16 CONTACTS

T

SS

THREAD

CLINCH NUT

P

.019 .001 DIA.

FOR SIZE 20 &

22D CONTACTS

HOW TO ORDER

•

Order by applicable 88/91 part number in table below.

88 prefix designates olive drab cadmium plated connector shell.

91 prefix designates electroless nickel plated connector shell.

•

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for

pins in normal position, S for sockets in normal position. See page 25 for alternate rota-

tion letter to use.

Example part number: 88-628701-35P designates shell size 9 with a 9-35 insert and pin

contacts in normal position.

•

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

+ .005 DIA

M

Z

Part Number

with

Clinch Nuts

M

+.000

–.005

N

+.001

P Max.

Panel

S

+.011

–.010

KK Dia.

+.006

–.005

SS Dia.

+.000

–.016

Size

16 & 20

Contacts

Shell

Size

L

Max.

R

T

Size 22D

Contacts

–.005 Thickness (TP)

Thread

9

11

13

15

17

19

21

23

25

88/91-628711-XXX .203

712-XXX .203

713-XXX .203

714-XXX .203

715-XXX .203

716-XXX .203

717-XXX .234

718-XXX .234

719-XXX .234

.820

.790

.572

.700

.234

.204

.193

.719 1.031 .112-40UNJC-3B

.812 1.125 .112-40UNJC-3B

.906 1.172 .112-40UNJC-3B

.969 1.281 .112-40UNJC-3B

1.062 1.375 .112-40UNJC-3B

1.156 1.469 .112-40UNJC-3B

1.250 1.625 .112-40UNJC-3B

1.375 1.750 .138-32UNJC-3B

1.500 1.875 .138-32UNJC-3B

.433

.557

.662

.810

.454 – .401 .468 – .406

.850

.676

.960

.975

.801

1.085

1.210

1.317

1.442

1.567

1.692

1.100

1.207

1.332

1.457

1.582

.926

1.032

1.157

1.282

1.407

All dimensions for reference only.

* Consult Amphenol for more information on ordering connectors with clinch nuts. There is also a 3mm clinch nut available (part number 88/91-628410/419)

30

MIL-DTL-38999 Series I Type Connectors

with PCB contacts

LJT07R jam nut receptacle

C

.328 MAX.

Z

T

PCB TAIL STICKOUT

A*

N

.062 .001 DIA.

FOR SIZE 16 CONTACT

.019 .001 DIA.

FOR SIZE 20 & 22D

CONTACTS

RR

THREAD

H

S

V THREAD

.062 MIN.

.125 MAX PANEL THICKNESS

.915 .005

HOW TO ORDER

•

Order by applicable 88/91 part number in table below.

88 prefix designates olive drab cadmium plated connector shell.

91 prefix designates electroless nickel plated connector shell.

•

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for

pins in normal position, S for sockets in normal position. See page 25 for alternate rota-

tion letter to use.

Example part number: 88-569721-35P designates shell size 9 with a 9-35 insert and pin

contacts in normal position.

★

.059 dia. min. 3 lockwire holes.

Formed lockwire hole design (6 holes) is optional.

“D” shaped mounting hole dimensions

•

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

*

Z

A*

+.000

–.010

H Hex

+.017

–.016

N

+.001

–.005

T*

+.010

–.000

V Thread

Class 2A

(Plated)

RR Thread

Class 2A

(Plated)

Size

16 & 20

Contacts

Shell

Size

C

Max.

L

Max.

S

±.016

Size 22D

Contacts

Part Number

88/91-569721-XXX

722-XXX

9

11

13

15

17

19

21

23

25

.669

.769

.955

1.199

1.386

1.511

1.636

1.761

1.949

2.073

2.199

2.323

.875

1.000

1.188

1.312

1.438

1.562

1.688

1.812

2.000

.625

.656

.750

.572

.700

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

2.188

.697

.822

.4375-28 UNEF

.5625-24 UNEF

.6875-24 UNEF .229 – .175 .243 – .182

.8125-20 UNEF .229 – .175 .243 – .182

723-XXX

.850

1.007

1.134

1.259

.6875-24 UNEF 1.0000-20 UNEF .229 – .175 .243 – .182

.8125-20 UNEF 1.1250-18 UNEF .229 – .175 .243 – .182

.9375-20 UNEF 1.2500-18 UNEF .229 – .175 .243 – .182

724-XXX 1.084

725-XXX 1.208

726-XXX 1.333

727-XXX 1.459

728-XXX 1.580

729-XXX 1.709

.975

1.100

1.207

1.332

1.457

1.582

1.384 1.0625-18 UNEF 1.3750-18 UNEF .207 – .158 .221 – .165

1.507 1.1875-18 UNEF 1.5000-18 UNEF .207 – .158 .221 – .165

1.634 1.3125-18 UNEF 1.6250-18 UNEF .207 – .158 .221 – .165

1.759 1.4375-18 UNEF 1.7500-18 UNS .207 – .158 .221 – .165

All dimensions for reference only.

31

MIL-DTL-38999 Series II Type Connectors

with PCB contacts

JTPQ00R wall mounting receptacle

(back panel mounting)

.000

.005

.447

S

.438 MAX

R

(TP)

Z

SS

P

PCB TAIL STICKOUT

PANEL

THICKNESS

R

(TP)

S

N

AD

.062 .001 DIA.

FOR SIZE 16 CONTACTS

.019 .001 DIA.

FOR SIZES 20 &

22D CONTACTS

.000

.005

.322

T

4 HOLES

V THREAD

HOW TO ORDER

•

Order by applicable 88/91 part number in table below.

88 prefix designates olive drab cadmium plated connector shell.

91 prefix designates electroless nickel plated connector shell.

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for

pins in normal position, S for sockets in normal position. See page 25 for alternate rota-

tion letter to use.

•

Example part number: 88-569731-35P designates shell size 8 with a 8-35 insert and pin

contacts in normal position.

•

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

+ .005 DIA

M

Z

N

+.001

–.005 Thickness

P Max.

Panel

T

V Thread

Class 2A

(Plated)

AD

Dia.

±.005

SS Dia.

+.000

–.016

Size

16 & 20

Contacts

Shell

Size

R

(TP)

S

±.016

Dia.

±.005

Size 22D

Contacts

Part Number

88/91-569731-XXX

732-XXX

8

10

12

14

16

18

20

22

24

.473

.590

.142

.594

.719

.812

.938

.120

.147

.4375-28 UNEF

.5625-24 UNEF

.6875-24 UNEF

.8125-20 UNEF

.516

.633

.802

.927

.563

.680

.257 – .200 .268 – .178

733-XXX

.750

.812

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.859

734-XXX

.875

.906

.984

735-XXX

1.000

1.125

1.250

1.375

1.500

.969

.9375-20 UNEF 1.052

1.0625-18 UNEF 1.177

1.1875-18 UNEF 1.302

1.3125-18 UNEF 1.427

1.4375-18 UNEF 1.552

1.108

1.233

1.358

1.483

1.610

736-XXX

1.062

1.156

1.250

1.375

737-XXX

738-XXX

739-XXX

All dimensions for reference only.

32

MIL-DTL-38999 Series II Type Connectors

with PCB contacts

JTP02R box mounting receptacle

(back panel mounting)

.006

.000

S

.505

P

.000

.005

R

(TP)

.447

PANEL THICKNESS

Z

PCB TAIL STICKOUT

R

(TP)

S

AD

N

KK

.062 .001 DIA.

FOR SIZE 16 CONTACTS

.019 .001 DIA.

FOR SIZES 20 &

22D CONTACTS

.000

.005

.322

T

L

4 HOLES

HOW TO ORDER

•

Order by applicable 88/91 part number in table below.

88 prefix designates olive drab cadmium plated connector shell.

91 prefix designates electroless nickel plated connector shell.

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for

pins in normal position, S for sockets in normal position. See page 25 for alternate rota-

tion letter to use.

•

Example part number: 88-569741-35P designates shell size 8 with a 8-35 insert and pin

contacts in normal position.

•

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

+ .005 DIA

M

Z

N

+.001

–.005 Thickness

P Max.

Panel

T

AD

Dia.

±.005

KK

Dia.

Max.

Size

16 & 20

Contacts

Shell

Size

L

Max.

R

(TP)

S

±.016

Dia.

±.005

Size 22D

Contacts

Part Number

88/91-569741-XXX

742-XXX

8

10

12

14

16

18

20

22

24

.225

.473

.590

.147

.152

.179

.169

.594

.719

.812

.938

.120

.147

.516

.633

.531

.656

.455 – .403 .466 – .409

743-XXX

.750

.812

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.802

.828

744-XXX

.875

.906

.927

.953

745-XXX

1.000

1.125

1.250

1.375

1.500

.969

1.052

1.177

1.302

1.427

1.552

1.078

1.203

1.328

1.453

1.578

746-XXX

1.062

1.156

1.250

1.375

747-XXX

748-XXX

749-XXX

All dimensions for reference only.

33

MIL-DTL-38999 Series II Type Connectors

with PCB contacts

JT07R jam nut receptacle

C

M

+ .011

– .010

.094

S

(2 PLACES)

H

.062 MIN.

.109 MAX.

PANEL THICKNESS

Z

PCB TAIL STICKOUT

N

.062 ± .001 DIA. FOR SIZE 16 CONTACTS

.019 ± .001 DIA.

FOR SIZES 20 & 22D CONTACTS

V THREAD

L

T*

RR

THREAD

HOW TO ORDER

•

Order by applicable 88/91 part number in table below.

88 prefix designates olive drab cadmium plated connector shell.

91 prefix designates electroless nickel plated connector shell.

•

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for

pins in normal position, S for sockets in normal position. See page 25 for alternate rota-

tion letter to use.

Example part number: 88-569751-35P designates shell size 8 with a 8-35 insert and pin

contacts in normal position.

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

★

.059 dia. min. 3 lockwire holes.

Formed lockwire hole design (6 holes) is optional.

“D” shaped mounting hole dimensions

•

*

Z

A*

+.000

–.010

H Hex

+.017

–.016

N

+.001

T*

+.010

V Thread

Class 2A

(Plated)

RR Thread

Class 2A

(Plated)

Size

16 & 20

Contacts

Shell

Size

C

Max.

L

M

S

Size 22D

Contacts

Part Number

88/91-569751-XXX

752-XXX

Max. ±.005 –.005 ±.016 –.000

8

10

12

14

16

18

20

22

24

.830 1.390 1.062

.955 1.515 1.188

.453

.422

.438

.464

.473 1.250

.884

.4375-28 UNEF

.8750-20 UNEF .272 – .200 .283 – .178

.590 1.375 1.007

.750 1.500 1.134

.875 1.625 1.259

1.000 1.781 1.384

.5625-24 UNEF 1.0000-20 UNEF .272 – .200 .283 – .178

.6875-24 UNEF 1.1250-18 UNEF .272 – .200 .283 – .178

.8125-20 UNEF 1.2500-18 UNEF .272 – .200 .283 – .178

.9375-20 UNEF 1.3750-18 UNEF .272 – .200 .283 – .178

753-XXX 1.084 1.640 1.312

754-XXX 1.208 1.765 1.438

755-XXX 1.333 1.953 1.562

756-XXX 1.459 2.031 1.688

757-XXX 1.576 2.156 1.812

758-XXX 1.701 2.280 2.000

759-XXX 1.826 2.405 2.125

1.125 1.890 1.507 1.0625-18 UNEF 1.5000-18 UNEF .272 – .200 .283 – .178

1.250 2.016 1.634 1.1875-18 UNEF 1.6250-18 UNEF .272 – .200 .283 – .178

1.375 2.140 1.759 1.3125-18 UNEF 1.7500-18 UNS .272 – .200 .283 – .178

1.500 2.265 1.884 1.4375-18 UNEF 1.8750-16 UN

.272 – .200 .283 – .178

All dimensions for reference only.

34

MIL-DTL-38999 Series III Type Connectors

with PCB contacts

TVP00R wall mounting receptacle

(back panel mounting)

S

LL

M

2 PLACES

1

R

B

2 PLACES

THREAD

L

2

R

AA

2 PLACES

Z

PCB TAIL STICKOUT

.001 DIA.

.062

FOR SIZE 16 CONTACTS

.019 .001 DIA.

FOR SIZE 20 & 22D CONTACTS

RED

BAND

T

4 PLACES

TT

4 PLACES

M

.005

BLUE

BAND

V THREAD

1.240 MAX.

HOW TO ORDER

•

Order by applicable 88/91 part number in table below.

88 prefix designates olive drab cadmium plated connector shell.

91 prefix designates electroless nickel plated connector shell.

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for

pins in normal position, S for sockets in normal position. See page 25 for alternate rota-

tion letter to use.

Composite Series III connectors are available;

consult Amphenol, Sidney, NY.

•

Designates true position dimensioning

†

Red band indicates fully mated

Example part number: 88-569761-35P designates shell size 9 with a 9-35 insert and pin

contacts in normal position.

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

†† Blue band indicates rear release contact

retention system

•

Z

B Thread

AA

Class 2A

(Plated)

0.1P-0.3L-TS Max.

M

+.000

–.005

T

V

Max.

Panel

LL

TT

Size

16 & 20

Contacts

Shell

Size

L

S

Max.

+.008

–.006

Thread

Metric

+.006 +.008

Size 22D

Contacts

1

2

Part Number

88/91-569761-XXX

762-XXX

R

Thickness –.000 –.006

9

11

13

15

17

19

21

23

25

.6250

.7500

.469

.500

.820

.790

.719

.812

.594

.948

.128

.154

M12X1-6g

M15X1-6g

M18X1-6g

M22X1-6g

M25X1-6g

M28X1-6g

M31X1-6g

M34X1-6g

M37X1-6g

.234

.204

.905

.216

.194

.173

.194

.242

.228–.178

.242–.181

.719 1.043

.812 1.137

.906 1.232

.969 1.323

763-XXX

.8750

.906

764-XXX

1.0000

1.1875

1.2500

1.3750

1.5000

1.6250

.969

765-XXX

1.062

766-XXX

1.156 1.062 1.449

1.250 1.156 1.575

1.375 1.250 1.701

1.500 1.375 1.823

767-XXX

768-XXX

769-XXX

All dimensions for reference only.

35

MIL-DTL-38999 Series III Type Connectors

with PCB contacts

TVP00R wall mounting receptacle

(back panel mounting) (with clinch nuts)

CONNECTOR WITH CLINCH NUTS

(4 PLACES)

S

LL

M

2 PLACES

B

R

THREAD

L

2 PLACES

AA

Z

PCB TAIL STICKOUT

.001 DIA.

.062

FOR SIZE 16 CONTACTS

T

.019 .001 DIA.

FOR SIZE 20 & 22D CONTACTS

RED

BAND

THREAD

CLINCH NUT

BLUE

BAND

M

.005

V THREAD

1.240 MAX.

HOW TO ORDER

•

Order by applicable 88/91 part number in table below.

88 prefix designates olive drab cadmium plated connector shell.

91 prefix designates electroless nickel plated connector shell.

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for

pins in normal position, S for sockets in normal position. See page 25 for alternate rota-

tion letter to use.

Example part number: 88-628741-35P designates shell size 9 with a 9-35 insert and pin

contacts in normal position.

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

Composite Series III connectors are available;

consult Amphenol, Sidney, NY.

•

Designates true position dimensioning

†

Red band indicates fully mated

†† Blue band indicates rear release contact

retention system

•

Z

B Thread

AA

Part Number

with

Clinch Nuts

Class 2A

(Plated)

0.1P-0.3L-TS

M

+.000

–.005

V

Max.

Panel

LL

+.006

Size

16 & 20

Shell

Size

L

Max.

S

Max.

T

Thread

Metric

Size 22D

R

Thread

Thickness –.000 Contacts Contacts

9

11

13

15

17

19

21

23

25

88/91-628741-XXX

742-XXX

.6250

.7500

.469

.500

.820

.790

.719

1.094

1.187

1.281

1.344

1.437

1.531

1.625

1.750

1.875

.112-40UNC-3B M12X1-6g

.112-40UNC-3B M15X1-6g

.112-40UNC-3B M18X1-6g

.112-40UNC-3B M22X1-6g

.112-40UNC-3B M25X1-6g

.112-40UNC-3B M28X1-6g

.112-40UNC-3B M31X1-6g

.138-32UNC-3B M34X1-6g

.138-32UNC-3B M37X1-6g

.234

.204

.905

.228–.178 .242–.181

.812

743-XXX

.8750

.906

744-XXX

1.0000

1.1875

1.2500

1.3750

1.5000

1.6250

.969

745-XXX

1.062

1.156

1.250

1.375

1.500

746-XXX

747-XXX

748-XXX

749-XXX

All dimensions for reference only.

* Consult Amphenol for more information on ordering connectors with clinch nuts.

36

MIL-DTL-38999 Series III Type Connectors

with PCB contacts

TVP02R box mounting receptacle

S

2 PLACES

1

L

R

BLUE

BAND

2 PLACES

2

R

ZZ

RED

BAND

2 PLACES

.062 .001 DIA.

FOR SIZE 16 CONTACTS

.019 .001 DIA.

FOR SIZES 20 &

22D CONTACTS

Z

B

PCB TAIL STICKOUT

T

AA

M

THREAD

4 PLACES

.005

M

TT

4 PLACES

LL

HOW TO ORDER

•

Order by applicable 88/91 part number in table below.

88 prefix designates olive drab cadmium plated connector shell.

91 prefix designates electroless nickel plated connector shell.

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for

pins in normal position, S for sockets in normal position. See page 25 for alternate rota-

tion letter to use.

Composite Series III connectors are available;

consult Amphenol, Sidney, NY.

•

Designates true position dimensioning

†

Red band indicates fully mated

Example part number: 88-569771-35P designates shell size 9 with a 9-35 insert and pin

contacts in normal position.

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

†† Blue band indicates rear release contact

retention system

•

Z

B Thread

AA

Class 2A

(Plated)

0.1P-0.3L-TS

M

+.000

–.005

T

Max.

Panel

LL

+.006

TT

+.008

–.006

Size

16 & 20

Contacts

Shell

Size

L

Max.

S

Max.

+.008

Size 22D

Contacts

1

2

Part Number

88/91-569771-XXX

772-XXX

R

–.006 Thickness –.000

9

11

13

15

17

19

21

23

25

.6250

.7500

.205

.235

.820

.790

.719

.812

.594

.719

.948

1.043

1.137

1.232

1.323

1.449

1.575

1.701

1.823

.128

.154

.234

.204

.905

.216

.194

.173

.194

.242

.460–.375

.471–.399

773-XXX

.8750

.906

.812

774-XXX

1.0000

1.1875

1.2500

1.3750

1.5000

1.6250

.969

.906

775-XXX

1.062

1.156

1.250

1.375

1.500

.969

776-XXX

1.062

1.156

1.250

1.375

777-XXX

778-XXX

779-XXX

All dimensions for reference only.

37

MIL-DTL-38999 Series III Type Connectors

with PCB contacts

TVP02R box mounting receptacle

(with clinch nuts)

CONNECTOR WITH CLINCH NUTS

(4 PLACES)

S

2 PLACES

L

BLUE

BAND

R

2 PLACES

RED

BAND

.062 .001 DIA.

FOR SIZE 16 CONTACTS

.019 .001 DIA.

FOR SIZES 20 &

22D CONTACTS

Z

PCB TAIL STICKOUT

B

T

THREAD

AA

M

THREAD

CLINCH NUT

M

.005

.162 – .072

FOR SIZE 16 & 20 CONTACTS

.142 .022

LL

FOR SIZE 22D CONTACTS

HOW TO ORDER

•

Order by applicable 88/91 part number in table below.

88 prefix designates olive drab cadmium plated connector shell.

91 prefix designates electroless nickel plated connector shell.

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for

pins in normal position, S for sockets in normal position. See page 25 for alternate rota-

tion letter to use.

Composite Series III connectors are available;

consult Amphenol, Sidney, NY.

•

Designates true position dimensioning

†

Red band indicates fully mated

Example part number: 88-628751-35P designates shell size 9 with a 9-35 insert and pin

contacts in normal position.

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

†† Blue band indicates rear release contact

retention system

•

Z

B Thread

AA

Part Number

with

Clinch Nuts

Class 2A

(Plated)

0.1P-0.3L-TS

M

+.000

–.005

Max.

Panel

Thickness

LL

+.006

–.000

Size

16 & 20

Contacts

Shell

Size

L

Max.

S

Max.

T

Size 22D

Contacts

R

Thread

9

11

13

15

17

19

21

23

25

88/91-628751-XXX

752-XXX

.6250

.7500

.205

.235

.820

.790

.719

1.031

1.125

1.172

1.281

1.375

1.469

1.562

1.750

1.875

.112-40UNC-3B

.138-32UNC-3B

.234

.204

.905

.460–.375

.471–.399

.812

753-XXX

.8750

.906

754-XXX

1.0000

1.1875

1.2500

1.3750

1.5000

1.6250

.969

755-XXX

1.062

1.156

1.250

1.375

1.500

756-XXX

757-XXX

758-XXX

759-XXX

All dimensions for reference only.

* Consult Amphenol for more information on ordering connectors with clinch nuts.

38

MIL-DTL-38999 Series III Type Connectors

with PCB contacts

TV07R jam nut receptacle

.378 MAX.

PANEL THICKNESS

.062 MIN.

.125 MAX.

C

BLUE

BAND

Z PCB TAIL STICKOUT

.062 .001 DIA. FOR SIZE 16 CONTACTS

.019 .001 DIA.

FOR SIZES 20 & 22D CONTACTS

RED

BAND

B THREAD

V THREAD

H

S

2 PLACES

1.280 MAX.

HOW TO ORDER

•

Order by applicable 88/91 part number in table below.

88 prefix designates olive drab cadmium plated connector shell.

91 prefix designates electroless nickel plated connector shell.

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for

pins in normal position, S for sockets in normal position. See page 25 for alternate rota-

tion letter to use.

Composite Series III connectors are available;

consult Amphenol, Sidney, NY.

•

†

Red band indicates fully mated

†† Blue band indicates rear release contact

retention system

★

.059 dia. min. 3 lockwire holes.

Formed lockwire hole design (6 holes) is optional.

“D” shaped mounting hole dimensions

Example part number: 88-569781-35P designates shell size 9 with a 9-35 insert and pin

contacts in normal position.

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

*

•

Z

A*

+.000

–.000

B Thread

Class 2A (Plated)

0.1P-0.3L-TS

H Hex

+.017

–.016

T

Size

16 & 20

Contacts

Shell

Size

C

Max.

S

±.010

+.010

–.000

V Thread

Metric

Size 22D

Contacts

Part Number

88/91-569781-XXX

782-XXX

9

11

13

15

17

19

21

23

25

.669

.769

.6250

.7500

1.199

1.386

1.511

1.636

1.761

1.949

2.073

2.199

2.323

.875

1.000

1.188

1.312

1.438

1.562

1.688

1.812

2.000

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

2.188

.697

.822

M12X1-6g

M15X1-6g

M18X1-6g

M22X1-6g

M25X1-6g

M28X1-6g

M31X1-6g

M34X1-6g

M37X1-6g

.244 – .200

.222 – .177

.258 – .206

.236 – .180

783-XXX

.955

.8750

1.007

1.134

1.259

1.384

1.507

1.634

1.759

784-XXX

1.084

1.208

1.333

1.459

1.575

1.709

1.0000

1.1875

1.2500

1.3750

1.5000

1.6250

785-XXX

786-XXX

787-XXX

788-XXX

789-XXX

All dimensions for reference only.

39

Stand-off Adapter

for use with 38999 PCB connectors

Amphenol’s stand-off adapter and spanner nut assembly allows any MIL-DTL-

38999 jam nut receptacle to support PCB contacts and may eliminate the need

for special stand-off shell design. Consult Amphenol for more information.

Tri-Start MIL-DTL-38999 Jam Nut

Connector with Stand-off Adapter

SPANNER

NUT

R

(TP)

ADAPTER

45

TYP

°

E

J

DIA.

R

(TP)

A

V THREAD

L

C DIA.

B DIA.

4 HOLES

#6-32 UNC-2B

THREAD (PLATED)

+.001

–.001

.250

M

.002

F

HOW TO ORDER

Order by

V Thread

Shell

Size

A

± .003

B Dia.

C

Dia.

J

Dia.

Metric

Plated

Part Number

± .003

1.188

1.375

1.500

1.625

1.750

1.938

2.062

2.188

2.312

E

L

9

XP10-611901-09G

XP10-611901-11G

XP10-611901-13G

XP10-611901-15G

XP10-611901-17G

XP10-611901-19G

XP10-611901-21G

XP10-611901-23G

XP10-611901-25G

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

2.188

.750

.200

.625

.744

.150

M12X1-6H

M15X1-6H

M18X1-6H

M22X1-6H

M25X1-6H

M28X1-6H

M31X1-6H

M34X1-6H

M37X1-6H

11

13

15

17

19

21

23

25

.900

.975

.862

1.125

1.250

1.375

1.469

1.625

1.750

1.019

1.137

1.255

1.373

1.492

1.610

All dimensions for reference only.

40

MIL-C-26482 Series 1 Type Connectors

with PCB contacts

PT02 box mounting receptacle

S

L

4 HOLES

.030 .001 DIA.

FOR SIZE 16 & 20

CONTACTS

.120 .005 DIA.

(.147 .005 DIA. SIZE 24)

M

R

(TP)

R

(TP)

S

A

N

K

Z

PCB TAIL STICKOUT

HOW TO ORDER

•

Order by applicable 71 part number in table below.

71 prefix designates olive drab cadmium plated connector shell.

(For availability of other finishes consult Amphenol, Sidney, NY)

•

Add insert arrangement to end of number. Refer to insert availability chart on

page 4 and pin-out illustrations on pages 4-24. Last letter of part number desig-

nates rotation; P for pins in normal position, S for sockets in normal position. See

page 26 for alternate rotation letter to use.

Example part number: 71-570121-98P designates shell size 8 with a 8-98 insert

and pin contacts in normal position.

•

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

(MMC) located within .0025 of (TP)

Z

+.040

–.050

A

K

M

N

S

Shell

Size

+.001

–.005

+.021

–.010

L

Max.

+.010

–.000

Dia.

Max.

R

(TP)

+.011

–.010

Size 16 & 20

Contacts

Part Number

71-570120-XXX

71-570121-XXX

71-570122-XXX

71-570123-XXX

71-570124-XXX

71-570125-XXX

71-570126-XXX

71-570127-XXX

71-570128-XXX

71-570129-XXX

6

8

.348

.473

.493

.650

.683

.825

.431

.556

.589

.323

.449

.469

.594

.688

.812

.380

.286

.253

10

12

14

16

18

20

22

24

.590

.825

.573

.719

.938

.750

.825

.699

.812

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.875

.825

.823

.906

1.000

1.125

1.250

1.375

1.500

.825

.949

.969

.825

1.073

1.199

1.323

1.449

1.062

1.156

1.250

1.375

1.076

1.109

All dimensions for reference only.

41

MIL-C-26482 Series 1 Type Connectors

with PCB contacts

PT07 jam nut receptacle

S

M

H

K

.030 .001 DIA.

FOR SIZE 16 & 20 CONTACTS

J

A

S

R THREAD

P

Z

PCB TAIL STICK OUT

HOW TO ORDER

•

Order by applicable 71 part number in table below.

71 prefix designates olive drab cadmium plated connector shell.

(For availability of other finishes consult Amphenol, Sidney, NY)

•

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and

pin-out illustrations on pages 4-24. Last letter of part number designates rotation; P for

pins in normal position, S for sockets in normal position. See page 26 for alternate rotation

letter to use.

Example part number: 71-533721-98P designates shell size 8 with a 8-98 insert and pin

contacts in normal position.

•

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

All lockwire holes are .044 dia. min.

Z

P Panel

Thickness

+.025

–.035

A Dia.

+.001

–.005

H

+.017

–.016

J Flat

+.000

–.010

K

+.011

–.010

R

Shell

Size

M

±.010

Thread

Class 2A

S

±.010

Size 16 & 20

Contacts

Part Number

71-533720-XXX

71-533721-XXX

71-533722-XXX

71-533723-XXX

71-533724-XXX

71-533725-XXX

71-533726-XXX

71-533727-XXX

71-533728-XXX

71-533729-XXX

Min.

Max.

.125

.250

6

8

.348

.473

.625

.750

.405

.530

.125

.156

.696

.884

.917

.062

.4375-28 UNEF

.5625-24 UNEF

.6875-24 UNEF

.8750-20 UNEF

1.0000-20 UNEF

1.1250-18 UNEF

1.2500-18 UNEF

1.3750-18 UNEF

1.5000-18 UNEF

1.6250-18 UNEF

.812

.938

.376

.367

.334

10

12

14

16

18

20

22

24

.590

.875

.655

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

.750

1.062

1.188

1.312

1.438

1.562

1.688

1.816

.818

.875

.942

1.000

1.125

1.250

1.375

1.500

1.066

1.191

1.316

1.441

1.566

All dimensions for reference only.

42

MIL-5015 Type Connectors

with PCB contacts

MS3102R box mounting receptacle

S

A

B

THREAD

R

Z

PCB TAIL STICKOUT

R

S

N

.030 .001 DIA.

FOR SIZE 16 CONTACTS

T

4 HOLES

M

K

L

HOW TO ORDER

•

Order by applicable 10- part number in table below.

10- prefix designates olive drab cadmium plated connector shell.

(For availability of other finishes consult Amphenol, Sidney, NY)

•

Add insert arrangement to end of number. Refer to insert availability chart on page 4 and pin-out

illustrations on pages 4-24. Last letter of part number designates rotation; P for pins in normal

position, S for sockets in normal position. See page 26 for alternate rotation letter to use.

Example part number: 10-602462-3P designates shell size 10SL with a 10SL-3 insert

and pin contacts in normal position.

Reverse Bayonet GT Series connectors

that incorporate 5015 inserts can also be

supplied with printed circuit board contacts.

Consult Amphenol for more information.

•

Z dimension is determined by contact type in the insert arrangement.

Most common options are shown; other options are available.

Z

±.045

A

B

K

+.020

–.010

L

M

+.010

–.000

N Dia.

+.010

–.000

T Dia.

+.004

–.002

Shell

Size

Thread

Class 2A

Min. Full

Thread

+.000

–.010

R

±.005

S

±.031

Size 16

Contacts

Part Number

10-602460-XXX

461-XXX

462-XXX

463-XXX

464-XXX

465-XXX

466-XXX

467-XXX

468-XXX

469-XXX

470-XXX

471-XXX

472-XXX

473-XXX

474-XXX

475-XXX

476-XXX

8S

10S

10SL

12S

12

.5000-28 UNEF

.6250-24 NEF

.7500-20 UNEF

.8750-20 UNEF

1.0000-20 UNEF

1.1250-18 NEF

1.2500-18 NEF

1.3750-18 NEF

1.5000-18 NEF

1.7500-18 NS

2.0000-18 NS

2.2500-16 UN

2.5000-16 UN

.391

.450

.625

.450

.625

.450

.625

.672

.860

.672

.860

.672

.860

.891

.953

1.031

.297

.484

.297

.484

.297

.484

.453

.438

.562

.750

.562

.750

.562

.750

.812

.875

.375

.500

.594

.875

1.000

1.094

1.188

1.281

1.375

1.500

1.625

1.750

2.000

2.250

2.500

2.750

.120

.147

.173

.188

.719

.625

.719

.625

.812

.625

.812

14S

14

.750

.906

.750

.906

16S

16

.875

.969

.875

.969

18

1.000

1.125

1.250

1.375

1.625

1.875

2.062

2.312

1.062

1.156

1.250

1.375

1.562

1.750

1.938

2.188

20

22

24

28

32

36

40

All dimensions for reference only.

43

Universal Header Assemblies

for flex print or PCB connectors

Mounts to all MIL-DTL-38999 and

MIL-C-26482 Connectors

The use of connectors with printed circuit

termination is rapidly gaining popularity due

to the use of high volume, vapor phase or

wave solder manufacturing processes. Ter-

mination of this style of connector to flex

print or a printed circuit board represents a

major cost in the manufacturing process for

users. When adding flex or printed circuit

board assemblies to an expensive filter or fil-

ter/transient protection connector, the total

cost of a failed solder joint, a bent pin, or an

unanticipated electrical failure becomes prohibitive. The univer-

sal header assembly from Amphenol will provide for easy sepa-

ration of the connector from the board on these occasions.

Headers provide easy separation of the

connector from the PC board.

Header Assemblies Provide Cost Savings

Incorporation of the header assembly provides the user with

time and cost saving potentials. These header assemblies can

be vapor phase or wave soldered to flex or printed circuit

boards prior to the receipt of the EMI/EMP connector. Headers

can be installed to standard connectors, allowing for electrical

testing that would adversely affect the sensitive diodes, MOV’s

or capacitors in the EMI/EMP connectors. Expensive connector

assemblies can be easily removed from and reattached to the

header assembly as the manufacturing process dictates.

Cylindrical Configuration

•

3 PCB stickout dimensions are available.

Size 22D contacts use .175 thick headers

Size 16 contacts use .195 thick headers

Consult Amphenol for Size 20 contact use with headers.

Headers for cylindrical connectors accommodate up to 128

pins. Consult Amphenol catalogs for mating connector con-

tact layouts (12-092 and 12-090 for MIL-DTL-38999 and

12-070 for MIL-C-26482).

Mounting Applications

Mounting to Rectangular ARINC Connectors

Shell modifications are recommended, but are not necessary.

The header assembly can be attached to connectors with stan-

dard flange placement or directly to the circuit board. The ideal

application would involve either a single flange moved all the

way to the rear of the connector or a double flange. Cinch nuts

can be installed in either flange to allow easier mounting to the

panel or the header assembly. The forward flange would mount

the connector to the panel; the rear flange would be used to

mount the header assembly. Various types of captivated or

loose attaching screws can be utilized for unique applications.

Amphenol universal headers are slotted to allow mounting to all

series of MIL-DTL-38999 or MIL-C-26482 connectors without

special alterations. They are of similar dimension as the flange

of the mounting connector and would be approximately .185

inches (4.70 mm) thick.

•

Headers for ARINC connector arrangements accommo-

date up to 150 pins.

Consult Amphenol for ARINC configurations and detailed

dimensions.

•

Materials

•

Body is molded from Torlon or PPS (Polyphenylene

Sulfide)

Electrical engagement areas of the header contact are

plated with .00003 inches minimum of gold over .00005

inches minimum of nickel.

•

Incorporates a Shorter Pin/Socket Contact

The heart of the header assembly is a short pin/socket contact.

The tall of the contact would accommodate standard through-

hole diameter and thickness of the flex or printed circuit board

materials. The socket is imbedded in the molded material, mak-

ing electrical engagement with the printed circuit tail of the con-

nector.

44

Universal Header Assemblies

for flex print or PCB connectors, cont.

The drawing below shows the standard universal adapter for use with MIL-DTL-38999 and MIL-C-26482

connectors. Consult Amphenol, Sidney, NY for drawings of headers for ARINC configurations.

S

R1

VISUAL

INDICATOR NOTCH

R2

T

G

FOR TOP C OF

L

INSERT PATTERN

(SIZE & CONFIGURATION

OPTIONAL)

SIZE 22

CONTACT VIEW

.020 ± .001

TT

F RADIUS

B

PCB STICKOUT

(SEE SUFFIX CHART BELOW)

T

TT

+.008

–.006

SIZE 16 AND 20

CONTACT VIEW

Assembly

Part Number

Shell

Size

F

G

±.005

S

±.005

+.008

–.006

R1

TP†

R2

TP†

Radius

B

21-904008-XX( )

21-904010-XX( )

21-904012-XX( )

21-904014-XX( )

21-904016-XX( )

21-904018-XX( )

21-904020-XX( )

21-904022-XX( )

21-904024-XX( )

8/9

.094

.125

.938

1.031

1.125

1.219

1.312

1.438

1.562

1.688

1.812

.128

.154

.719

.812

.594

.719

.216

.194

.173

.194

.242

PCB STICKOUT

(SEE SUFFIX CHART BELOW)

.050

10/11

12/13

14/15

16/17

18/19

20/21

22/23

24/25

.040 ± .001 (SIZE 20)

.0625 ± .0010 (SIZE 16)

.906

.812

.969

.906

1.062

1.156

1.250

1.375

1.500

.969

1.062

1.156

1.250

1.375

G

NOTE:

Size 22 accepts .018 to .022 dia. PCB tails.

Size 16 accepts .048 to .064 dia. PCB tails.

Size 20 accepts .037 to .043 dia. PCB tails.

See Suffix Chart

Assemblies containing Size 22 contact only: .175

Assemblies containing Size 16 or 20 contacts: .195

† TP designates true position dimensioning.

HOW TO ORDER INFORMATION

ASSEMBLY NUMBER SUFFIX CHART

For Universal Adapter used with MIL-DTL-38999 and MIL-C-26482

Connectors

Contact

PCB Stickout**

Arrangement

Use coded number as follows:

Shell Size

Designation*

Number

Suffix***

B ±.015

Stickout

Suffix

21-9040

XX

–

XX

X

08

10

12

14

16

18

20

22

24

1

2

3

.120

Designates Amphenol^®

Interface Adapter

Shell size designation for

.185

Insert

Arrangement

Suffix

from

MIL-STD-1560 or

MIL-STD-1669

.270

MIL-DTL-38999 Series I, II, III and IV

or MIL-C-26482 Series 1 and 2.

See suffix chart.

Arrangement number - See MIL-STD-1560

or MIL-STD-1669. Also consult Amphenol

catalogs 12-092 (MIL-DTL-38999 Series III),

12-090 (MIL-DTL-38999 Series I, II), and

12-070 (MIL-C-26482 Series 1)

Contact PCB Stickout designation

See suffix chart.

*

Shell size designation for MIL-DTL-38999 Series I, II, III & IV

and MIL-C-26482 Series 1 and 2.

Examples: Shell size 9 use 08. Shell size 25 use 24.

** Size 22 contacts available in all 3 stickout lengths.

Size 16 and 20 contacts available only in .185 and .270 lengths.

*** Insert arrangement 14-97 and 15-97 are not available at this

time. Consult Amphenol, Sidney, NY for information.

For how to order information on adapters to be used with ARINC connectors,

consult Amphenol Aerospace, Sidney NY.

45

Additional Products for PCB Application

®

Amphenol rectangular interconnects

Amphenol is also a leader in rectangular

interconnects for printed circuit board appli-

cation. Within the rectangular families of

Amphenol interconnects are Low Mating

Force MIL-C-55302 connectors and LRM Sur-

face Mount Connectors.

Variety of Low Mating Force Rectangular Connectors including styles with fiber

optics (right) and small styles with only 10 contacts (upper left).

1

2

3

4

LOW MATING FORCE MIL-C-55302 CONNECTORS

• Superior electrical characteristics - redundant current paths, low

constrictive resistance, stable time/life contact resistance,

uniform current densities

• High performance polyester dielectric moldings

• Over 20,000 mating cycles with B³Bristle Brush Bunch^®

contacts

• Significant reduction in mating force. Only 1.5 ounce max

contact engaging and separating forces

• –65° to +125°C temperature rating

• High circuit count interconnections to 400 contacts per connector

• Two, three and four row patterns, 10 to 100 contacts per row,

in one contact per row increments

• 0.100 in. center to center contact spacing, square grid

• Serviceability - removable crimp contacts, repairable PC

stud and solder less wrap contacts

• Board support structure - reinforcing reduced

• Variety of contact terminations and platings

• Accessories to suit latching, piloting and polarization variations

• Up to 256 keyed mating polarizations

M55302/166 or 167 Mother Board, M55302/170 Daughter Board

1., 2. Two piece PCB connector featuring PCB stud or solderless

wrap contacts in the MB Series and field repairable 90° PCB stud

contacts in the DB Series.

M55302/169 Input/Output

3. Rear release, rear removable crimp contacts for discrete wire

cabling. I/O connector series mates with standard MB and PC recep-

tacle series to provide external inputs/outputs.

M55302/168 PC

4. 90° PCB stud contacts for side mounting on board. Mates with DB

and I/O series.

Hybrid Rectangular Connectors with Brush/Power/Coax/Fiber

Optic Combinations

Amphenol offers wide versatility of combining contact types in rectan-

gular interconnects.

For more information on Low Mating Force Connectors see catalog

12-035 online at www.amphenol-aerospace.com

46

Additional Products for PCB Application

®

Amphenol rectangular interconnects, cont.

LRM SURFACE MOUNT CONNECTORS

The introduction of high speed integrated circuitry such as VHSIC and MMIC

has enabled the Design Engineer to accomplish far more on his printed circuit

board than ever before. This, coupled with the emergence of a revolutionary

change in avionics packaging - modular avionic architectures - has created the

need for a high performance, low insertion force PCB connector with signifi-

cantly increased contact density.

The LRM (Line Replaceable Module) connector series are high performance,

high density interconnects, specifically designed to connect printed circuit

boards. The Amphenol Brush contact technology is the foundation of the LRM

connector series.

LRM Connectors with Staggered Grid

• Advanced design to provide high contact density for high speed integrated

circuitry in SEM-E and custom form factors

• 180 contact insert pattern grid in 8 rows: 0.100 inch spacing along the row

with 0.050 inch between rows, rows offset 0.050 inch.

• Options include various shell designs to accommodate a wide range of PC

board/heat sink combinations

• Solder tail, wire wrap or compliant contact availability

• ESD protection

From top to bottom:

LRM Connectors with GEN-X Grid

Staggered Grid, 2 Bay LRM;

GEN-X Grid, 2 Bay LRM;

LRM inserts with RADSOK contacts;

LRM insert with MT ferrule fiber optics and brush con-

tacts in a Differential Pair insert.

• Higher contact density and improved electrical performance

• All the features of the 180 contact pattern, including ESD protection

• Available in SEM-E and custom form factors

• 236 contact pattern grid in 8 rows: 0.075 inch spacing along the row with

0.060 inch between rows, rows offset 0.0375 inch

LRM Staggered Grid Airflow-thru Connectors

• Available for wider boards up to 0.425 inch. These accommodate standard

brush tails in staggered pattern, but with increased spacing in the center,

and they also provide more airflow cooling of inserts.

LRM Connectors with Many Contact and Shell Design Options

Flexibility to meet customer demands that include: combinations of brush and

fiber optics; options for high speed contacts, RF contacts, or new high amper-

age RADSOK^®contacts; incorporation of flex circuits; custom shells with multi-

ple bays.

For more information on LRM Connectors see new catalog 12-037 at website

www.amphenol-aerospace.com.

LRM Module Inserts (showing front and back of inserts)

with PC Tails in Staggered Grid Pattern

BACKPLANE ASSEMBLIES

Amphenol is the leading manufacturer of custom backplane assemblies using

high density, ruggedized, board-to-board backplane interconnects. These can

incorporate brush contacts, pc tail, or press-fit compliant pin contacts, or fiber

optic termini. They also can incorporate fork and blade contacts (see next page

for fork and blade contact connectors).

• Electrical Backplanes - Large panel sizes with high layer counts, and fea-

tures such as high aspect ratio plating, small diameter plated-through holes,

and controlled impedances.

• Optical Backplanes - Fiber termination with Multi-Terminal (MT) optical fer-

rules. Ribbon cable sorting allows programming flexibility; thus rendering the

entire system easily upgradeable.

• Hybrid Optical Backplanes - Integrated electrical and optical systems in one

discreet package for advanced avionics systems.

For more information on Backplane Assemblies from Amphenol Backplane

Systems division, see publication SL-392 at websites:

www.amphenol-abs.com or www.amphenol-aerospace.com.

47

Backplane Assembly with LRM Connectors with Brush

Contacts on one side and Cylindrical Connectors with

Press-fit Compliant Contacts on the other.

®

Amphenol Rectangular Interconnects

additional products for PCB application

UHD MODULE/BACKPLANE CONNECTORS WITH FORK & BLADE

CONTACTS

Amphenol’s wide range of board level interconnects also includes high

density UHD Series module and backplane connectors. These use the

staggered grid pattern but do not use brush contacts. The staggered grid

pattern is 80 contacts per inch, .025 pitch in 8 rows. They are SEM-E for-

mat and are qualified to: EIA 15-763, DESC 89065, IEEE 1101.1 to

1101.9.

The UHD module connectors have surface mount blade contacts and the

mating UHD backplane connectors have solderless press-fit tuning fork

contacts. There are a wide range of high contact density patterns and the

length and style can be tailored to meet customer requirements. They

are rigid pin terminated to the board or flex terminated to the board.

Coax, fiber optics and power contacts can also be integrated into the

connector configuration. Other options include EMI shielding and UHD

interconnects can be provided in a stacking configuration.

UHD Backplane Connectors on Board, Rigid Pin

Termination, with Fiber Optics, Coax or Power Contacts

NAFI SERIES WITH FORK & BLADE CONTACTS

Amphenol NAFI daughtercard and backplane connectors are another

board level interconnect that uses the fork and blade contact termination.

They provide a wide range of medium contact density patterns and meet

MIL-C-28754 standards. Daughtercard termination is through-hole, using

nickel/gold solder plated contacts. The mating interface is a blade con-

tact which can be either parallel or perpendicular to the daughtercard.

They are available with 2, 3, 4 and 5 rows of contacts, .100 x .100 pitch.

They can be rigid pin terminated to the board or flex circuitry can be used

to attach to the board.

Both UHD and NAFI interconnects are used in military and commercial

aviation, in space applications, shipboard and in military vehicles. For

more information see catalog 12-036 at www.amphenol-abs.com or

www.amphenol-aerospace.com.

NAFI Daughtercard Connector with Flex Termination

PRINTED CIRCUIT BOARD TERMINAL BLOCKS

Amphenol Pcd division supplies wire-to-board discrete-wire connections

in a variety of styles.

• Pluggable terminal blocks and headers in 3.5mm/.150” pitches in

straight, angled, with locking ears, 2-tier, 3 tier, and low profile styles.

• Fixed terminal blocks in 5.0mm, .200”, .250”, .375” pitches in standard

profiles, multi-tier, spring-clamp, high current and high voltage styles.

• Edgecard connectors that are screw terminated style in different size

pitches.

• Custom designed terminal blocks with ear mounting options, DIN-rail

mounting options, and others.

WIRING INTERFACE MODULES

Amphenol Pcd also supplies an industrial board level interconnect that

replaces discrete terminations with a single pluggable unit. Connectors

can be D-Sub, ribbon cable, RJ style, Centronic or DIN types. Also

diodes, LEDs, resistors, capacitors, relays or fuses can be included in

the unit.

For more information on terminal blocks and wiring interface modules go

online to www.amphenol-pcd.com.

PCB Circuit Board Terminal Blocks and Wiring Interface Mod-

ules

48


型号：	88-569729-35R
厂家：	Amphenol
描述：	MIL Series Connector, 连接器
文件：	总53页 (文件大小：1309K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

88-569729-35R [AMPHENOL]

相关型号：

88-569729-35W

88-569729-61P

88-569729-61S

88-569731-3P

88-569731-98S

88-569733-35F

88-569733-35S

88-569733-3S

88-569734-35F

88-569736-11S

88-569736-35R

88-569738-35P