CL101000 [AMPHENOL]
Circular Connector Adapter;
| 型号： | CL101000 |
| 厂家： | 
Amphenol |
| 描述： | Circular Connector Adapter |
| 文件： | 总12页 (文件大小：22220K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CLIPPER
Applications
Description
• Machines / Robotics
• Process control
• Instrumentation
• Railways
• Plastic low cost connector
• A retention plate system allowing
insertion/extraction of the contacts
without the need for tooling
• A high sealing level up to IP68
• Facilities to use trade backshells with
the electrical thread adaptor (PG)
Standards
Characteristics
Mechanical
Electrical
Climatic
• Monobloc shell and insulator in
thermoplastic* material self-extinguishing
to UL 94 VO
• 180° screw coupling with positive audible
safety latch
• Scoop proof
• Copper alloy contacts, machined or
stamped and formed :
- plating : gold flash on active part
• Mechanical endurance :
- connector : 250 cycles mating /
unmating
- retention plate : 50 cycles mating /
unmating
• Withstand voltage : 1500 Vrms min or in
accordance with DIN 57110b
• Contact resistance < 10 mΩ
• Current rating per contact :
- machined contacts :
Ø 1 mm (7 A), Ø 1.6 mm (13 A)
- stamped and formed contacts :
Ø 1 mm (5 A), Ø 1.6 mm (10 A)
• Working temperature :
-40°C to +125°C
• Sealing
examples :
- connector + sealing gland : IP68
- connector + grommet : IP67
• Resistance to salt spray :
- 48 h min
- > 1000 h (sealed mated connectors)
Resistance to fluids
- oil,
- petrol, fuel,
- lubricants
• Retention force :
- Ø 1 mm → 70 N
- other fluids : consult FCI
- Ø 1.6 mm → 90 N
• Vibration :
- frequency range : 10-2000 Hz, 20 g
- 10 cycles in accordance with CEI 68-2-6
* Composite version are under development.
Consult FCI.
Retention plate principle
Locked
plate
Unlocked
plate
Unlocked, the retention plate allows
Locked, the retention plate holds
the contacts firmly in position
the insertion/extraction of contacts without tooling
1
CLIPPER
Styles available
Backnut
Elbow backshell with sealing gland
Square flange receptacle
Adaptor
Straight cable clamp
Plug
Sealing gland backshell with
anti-decoupling system
Straight backshell for
flexible conduit systems
In line-receptacle
2
CLIPPER
Square flange receptacle and in-line receptacle
Part numbers
Unsealed receptacle
(without o’ring)
Sealed receptacle
Sealed receptacle
(with o’ring and
panel gasket)
Receptacle
types without
contacts
In-line
receptacle
(with o’ring)
for use with
backshell
Contacts
layouts
for
for
female
contacts
for
for
female
contacts
for
for
female
contacts
unsealed
for male
contacts
sealed
for male
contacts
male
male
male
contacts
contacts
contacts
4 cts
Ø 1.6 mm
CL1M1100 CL1R1100 CL1M1101 CL1R1101 CL1M1102 CL1R1102 CL1C1100 CL1C1101
Class 2 - VDE 380 V
1
2
9 cts
Ø 1 mm
CL1M1200
CL1M1201
CL1M1202
CL1C1200 CL1C1201
9 cts
Ø 1.6 mm
CL1M2100 CL1R2100 CL1M2101 CL1R2101 CL1M2102 CL1R2102 CL1C2100 CL1C2101
Class 2 - VDE 250 V
14 cts
Ø 1 mm
CL1M2200
CL1M2201
CL1M2202
CL1C2200 CL1C2201
18 cts
Ø 1.6 mm
CL1M3100 CL1R3100 CL1M3101 CL1R3101 CL1M3102 CL1R3102 CL1C3100 CL1C3101
Class 2 - VDE 250 V
3
4
31 cts
Ø 1 mm
CL1M3200
CL1M4100
CL1M3201
CL1M4101
CL1M3202
CL1M4102
CL1C3200 CL1C3201
CL1C4100 CL1C4101
26 cts
Ø 1.6 mm
Class 2 - VDE 250 V
40 cts
Ø 1.6 mm
CL1R4201 CL1M4202 CL1R4202 CL1C4200 CL1C4201
CL1M4200 CL1R4200 CL1M4201
3
CLIPPER
Plug and backnut
Part numbers
Unsealed plug
(without o’ring
and mating seal)
Sealed plug
Backnut
sealed
Backnut
unsealed
(with o’ring
Plug types
without
contacts
and mating seal)
Grommet
O ring
Thrust ring
Contact
layouts
for
for
female
contacts
for
for
female
contacts
for
for
for male
and female contacts
male
male
male
female
contacts
contacts
contacts
contacts
CL1F1101
4 cts
(IP67)
CL1P1100 CL1F1100 CL1P1101
CL1F1200
CL111102 CL111101
CL111202 CL111201
CL112102 CL112101
Ø 1.6 mm
CL1F1103
(IP68)
Class 2 - VDE 380 V
CL111000
CL112000
CL113000
CL114000
1
2
3
4
CL1F1201
9 cts
Ø 1 mm
(IP67)
CL1F1203
(IP68)
CL1F2101
9 cts
(IP67)
CL1P2100 CL1F2100 CL1P2101
CL1F2200
Ø 1.6 mm
CL1F2103
(IP68)
Class 2 - VDE 250 V
CL1F2201
14 cts
Ø 1 mm
(IP67)
CL1F2203
(IP68)
CL1F3101
18 cts
Ø 1.6 mm
(IP67)
CL1P3100 CL1F3100 CL1P3101
CL1F3200
CL113102 CL113101
CL1F3103
(IP68)
Class 2 - VDE 250 V
CL1F3201
31 cts
Ø 1 mm
(IP67)
CL1F3203
(IP68)
CL1F4101
26 cts
Ø 1.6 mm
(IP67)
CL1F4100
CL114102 CL114101
CL114202 CL114201
CL1F4103
(IP68)
Class 2 - VDE 380 V
CL1F4201
40 cts
Ø 1.6 mm
(IP67)
CL1P4200 CL1F4200 CL1P4201
CL1F4203
(IP68)
4
CLIPPER
Adaptor and electrical thread backshells (PG)
Unsealed
Part numbers
Shell sizes
1
2
3
4
Type
Description
(PG 13.5)
(PG 16)
(PG 21)
(PG 29)
(PG 36)
Adaptor
CL103000 CL124000
CL104000
CL101000 CL102000
Straight
backshell
for flexible
conduit
CL102040 CL103040 CL124040 CL104040
CL101040
CL101030
systems
Straight
cable
clamp
CL102030 CL103030 CL124030
-
S
ealed
Elbow
backshell
with sealing
gland
CL101051 CL102051 CL103051 CL124051
-
IP67
Straight
backshell
for flexible
conduit
systems
IP67
CL101041 CL102041
CL124041 CL104041
CL103041
Anti-
decoupling
sealing
gland
CL101021 CL102021 CL103021 CL124021 CL104021
backshell
IP68
Note : Electrical thread backshells are always supplied complete with the adaptor.
5
CLIPPER
Accessories
Panel gasket (for square flange receptacle)
Shell sizes
1
2
3
4
Part numbers
CL191001
CL192001
CL193001
CL194001
Elbow adaptors for receptacles
Dim.
Tailles
Elbow adaptors for receptacles
Shell 1 to 4
(mm)
de
A
B
C
D
E
boîtier
Shell
sizes
Part numbers
Shell
1
2
21.4
24.6
28.5
36.5
24.5
28.0
30.5
39.4
38.7
39.7
42.8
49.5
3.2
3.2
3.8
3.8
29.2
30.8
35.6
47.5
Sealed
Unsealed
1
2
3
4
CL131001 CL131000
CL132001 CL132000
CL133001 CL133000
CL134001 CL134000
3
4
Dust cap for receptacle IP67
Shell
Part numbers
1
CL141001
2
3
4
CL142001
CL143001
CL144001
6
CLIPPER
Stamped and formed contacts
Contact types
Wire insul.
diameter
(mm)
Cable
acceptance
(mm2)
Part numbers
with insulation support
(mm)
male
female
male
2.00 min.
0.70 to 1.50
CF16PC10RF
1.6
3.00 Max.
2.00 min.
3.00 Max.
CF16SC10RF
CF16PC19RF
CF16SC19RF
0.70 to 1.50
0.70 to 1.50
0.70 to 1.50
1.6
female
male
1.20 min.
0.35 to 0.60
CF10PC10RF
1
female
2.10 Max.
1.20 min.
2.10 Max.
CF10SC10RF
CF10PC19RF
CF10SC19RF
0.35 to 0.60
0.35 to 0.60
0.35 to 0.60
male
1
female
Plating RF : gold flash on active part for standard version.
Filler plug 1.6 mm
(for un-used contact cavities)
Part number : 8500 479 CL
For other platings, consult FCI.
7
CLIPPER
Machined contacts
Wire insul.
diameter
(mm)
Cable
acceptance
(mm2)
Part numbers
Contact types
(mm)
crimp
0.93 to 1.91
0.6 *
CM16PC10MQ
CM16PC20MQ
male
2.00 min.
1.6
0.93 to 1.91
0.6 *
CM16SC10MQ
CM16SC20MQ
female
male
3.00 Max.
2.00 min.
3.00 Max.
solder
crimp
CM16PS10MQ
CM16SS10MQ
1.91 Max.
1.91 Max.
1.6
female
0.21 to 0.93
0.06 to 0.21*
0.21 to 0.93
0.06 to 0.21*
CM10PC10MQ
CM10PC20MQ
CM10SC10MQ
CM10SC20MQ
male
female
male
1.20 min.
1
2.10 Max.
1.20 min.
2.10 Max.
solder
0.93 Max.
0.93 Max.
CM10PS10MQ
CM10SS10MQ
1
female
* Delivered with reducing sleeve
Plating MQ : 0.4 µ min gold on active part for standard version
Extended ground contact-crimp (+ 1 mm)
2.00 min.
3.00 Max.
8501 9641
male
0.93 to 1.91
1.6
Filler plug 1.6 mm
(for un-used contact cavities)
Part number : 8500 479 CL
For other platings, consult FCI.
8
CLIPPER
Dimensions
Square flange receptacle
Plug
Shell
sizes
Shell
sizes
Tailles
1
2
3
4
1
2
3
4
Dim.
(mm)
Dim.
de
(mm)
boîtier
A
20.20
29.10
20.50
38.60
20.20
32.50
24.00
39.60
20.20
37.10
28.50
39.60
20.20
48.80
40.00
39.60
42.4
21.0
18.0
42.4
24.5
18.0
42.4
29.0
18.0
42.4
40.5
18.0
A
B
C
B
C
D
D
E
4.0
4.0
4.0
4.0
20.5
24.0
28.5
40.0
F
29.7
31.3
36.0
47.9
min.
21.1
23.3
24.3
24.9
28.3
29.7
36.2
40.0
G
H
Max.
3.2
3.2
3.8
3.8
9
CLIPPER
Mated and unmated connectors with backshells
dimensions
LD
A
Shell
4
1
Dim.
2
3
(PG 29) (PG 36)
Cotes
(mm)
LDA
LVA
51
58.2
53.2
59.2
53.2
59.2
55.2
61.2
55.2
61.2
ADAPTOR
LDB
LVB
46
53
47
53
47
53
-
-
47
53
B
LDC
LVC
68
75.5
72.5
78.5
77
83
86.5
91.5
-
-
LDD
LVD
86.5
94
89
95
92
98
94
100
108
113.5
BACKNUT
C
D
LV
LDF
LVF
80
87
83
89
85
91
95
101
102
108
LDG
LVG
84
91
88
94
96
102
109
115
-
-
STRAIGHT CABLE CLAMP
Max.
R
57
59.5
73
91
-
STRAIGHT BACKSHELL FOR CONDUIT SYSTEM
F
cable acceptance *
Shell
4
1
2
3
SEALING GLAND BACKSHELL WITH ANTI-DECOUPLING SYSTEM
Dim.
Cotes
(PG 29) (PG 36)
(mm)
G
J
6/14
17
6/16
17
8/21 10/28
Conduit L
Pmaflex
23
29
36
36
Max.
N
K
16
16
21,5
27,5
Q
6/12 10/14 13/18 18/25 22/32
ELBOW BACKSHELL WITH SEALING GLAND
Q
6/12 10/14 13/18 18/25
-
* For other needs, consult FCI.
10
CLIPPER
Panel cut-out
Panel mounting
Shell
Tailles
sizes
de
1
2
3
4
4 holes ØG
Dim.
boîtiers
(mm)
H
J
21.5
21.4
3.2
25
31
41
24.6
3.2
28.6
3.8
36.5
3.8
G
J
Interchangeability with MIL-C-5015
CLIPPER
Shell 1
Shell 2
Shell 3
Shell 4
MIL-C-5015
Shell 14
Shell 16
Shell 20
Shell 28
Crimping tools *
Machined contacts
Stamped and formed
contacts ( 1 mm - 1.6 mm)
(
1 mm - 1.6 mm)
8465
Y16SCM-CL3
8365
with
locator
8365-02
* Other manual or semi-automatical crimping tool available, consult FCI.
See wiring instructions.
11
CLIPPER
General technical informations
Degree of protection in accordance with CEI 529, DIN 40050, NF EN 60529
First index
Second index
Third index
Protection against accidental or
inadvertent contact. Prot. against
ingress of foreign bodies.
Protection against mechanical
strength
Protection against ingress of water
Index
Test
No protection
0
Protection against diagonal drop water
0
IP x 0
No protection
2
drips (up to < of 15° of vertical)
Troisième
chiffre
IP0
0
No protection
Test
IP1
BallØ50mm
Impact strength : 0,225 J
Protection against vertical drop water
drips.
1
1
1
250 g
15 cm
Protection against contact with any large
area by hand, protect. against large
solid foreign bodies with Ø > 50 mm.
Test
finger
BallØ12.5mm
IP2
IP xx 1
Impact strength : 0,5 J
IP x 1
IP x 2
2
3
4
± 15°
4
Protection against diagonal drop water
drips (up to < of 60° out of vertical)
Protection against splash water from
all directions
3
3
5
7
250 g
Protection against contact with the fingers,
prot. against solid foreign bodies with Ø 12,5 mm
20 cm
IP3
Steel wire
Ø 2,5 mm
IP xx 3
Impact strength : 2 J
IP x 4
IP x 3
Protection against tools wires or similar
objects with Ø > 2,5 mm, prot. against
small foreign solid bodies with Ø > 2,5 mm
500 g
Protection against water
(out of a nozzle)
from all directions
5
6
7
IP4
40 cm
Steel wire
Ø 1 mm
IP xx 5
Impact strength : 6 J
Protection against tools wires or similar
objects with Ø > 1 mm, prot. against
small foreign solid bodies with Ø > 1 mm
IP x 5
1,5 kg
Full protection against accid. or
inadv. contact. Prot. against interior
injurious dust deposits.
IP5
IP6
Proof against
temporary flooding
40 cm
Talc
5
6
IP xx 7
Impact strength : 20 J
IP x 6
5 kg
8
Water tight
Protection against
water plunging
9
40 cm
Proof against
temporary
W
water plunging
Proof against water pressure
IP x 7
Total protection against accid. or inadv.
contact. Protection against of dust.
IP xx 9
EXAMPLE :
IP66-5 means: - Total protection against dust
- Proof against temporary flooding
- Proof against impact strength of 2 Joule
12
相关型号：
©2020 ICPDF网 联系我们和版权申明