FWFTV72N [AMPHENOL]
Telecom and Datacom Connector;型号: | FWFTV72N |
厂家: | Amphenol |
描述: | Telecom and Datacom Connector 连接器 |
文件: | 总4页 (文件大小:285K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FW FIELD TV
IEEE 1394 Connection System
for Harsh Environments
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
Description
FW Field allows you to use a standard IEEE1394 connection
in harsh environments:
• Sealed against fluids and dusts (IP67)
• Shock, vibration and traction resistant
• No timely in-field cabling operation necessary
• No assembly tools required
• Improved EMI protection
With FW Field, you can insert most standard IEEE 1394
cordsets into our metallic plug shell to protect it from
shocks, dust and fluids.
No hazardous in-field cabling and grounding required!
Transform your IEEE 1394
cordset into a Harsh
Environment Connector !
The metallic plug connects into the receptacle using a
Applications
Tri-Start Thread coupling mechanism (MIL-DTL-38999
series III type) with an anti-decoupling device for high
vibrations.
On the receptacle side, an IEEE 1394 receptacle is
soldered onto a PCB with the following back
terminations:
• Embedded Computers
• Data Acquisition and
Transmission in harsh
environments
• another IEEE 1394 receptacle
• solder board with 6 tined holes to solder your wires
For :
• Railways
• Battelfield Communication
Systems
• Naval & Shipboard Systems
• Robotics & Automation
• Process Control
• Rugged Communications
Standard cordset shielding is transmitted to the IEEE
1394 receptacle through grounding fingers.
For added EMI protection, the shells are conductively
plated (Ni, Cd) and have metallized receptacle inserts
which transmit the shielding to the connector shells and
then the panel.
1
Amphenol ®
Amphenol Pcd – 2 Technology Drive – Peabody – Massachussetts – 01960 USA
Tel. :+ 1 978-532-8800 x273 Fax : + 1 978-532-680
www.fwfield.com
Main Characteristics
Data Transmission
Environmental Protection
• IEEE 1394a – 2000
• Sealing (mated) : IP67 (Temporary immersion - 1M up to 30
minutes)
Data rate
400 Mbits/second over 4.5 meters
• Salt Spray :
48 hr with Nickel plating
500 hr with Olive Drab Cadmium
Mechanical
• Fire Retardant / Low Smoke : UL94 V0 and NF F 16 101 & 16 102
• Vibrations : 10 – 500 Hz, 10 g, 3 axes : no discontinuity > 1micro s
• Tri-start thread coupling mechanism (MIL-DTL-38999
series III type) with anti-decoupling device
• Shocks : IK06 : weight of 250 g drop from 40 cm [15.75 in] onto
connectors (mated pair)
•FW plug retention in the receptacle : 100 N in the axis
• Mating cycles : 500 to 1500 times
• Humidity : 21 days, 43°C, 98% humidity
• Temperature Range : - 55°C / +85°C
Can be used with most IEEE 1394 cordset brands : No tools required!
Assembly Instructions
Plug Assembly
1.
If a fully sealed (IP67) assembly is required: Install the
white tape around the plug to cover the 4 holes of the
overmolding. If there are no holes omit this step.
1
2
2.
Insert the black O Ring around the front face of the IEEE
1394 plug. This O Ring will ensure the seal.
3.
4.
Insert the IEEE 1394 cordset into the metallic backshell.
Insert laterally onto the cable the retention spacer (this
spacer is soft so as to adapt to various overmolding styles)
and slide the IEEE 1394 plug into this retention spacer.
4
6
3
5
5.
6.
Insert the friction ring laterally onto the cable cordset.
Insert the IEEE 1394 plug into the metallic circular shell.
Note at this step that the main key is used for polarization.
7.
Screw the backshell on the plug body. A spanner may be
required to fully close the backshell to the circular shell.
Important Note : The sealing of the connector is not done by the
black retention spacers which are sloted, but rather by the
front face O-Ring (Fig 2).
7
Receptacle Assembly
(For Solder back-termination Styles only)
To Solder your cable onto the PCB :
1.
Attach the 2 metallized plastic inserts around the PCB
(Fig 1a & 1b).
1a
1b
2.
Insert the IEEE 1394 module from the rear of the
connector.
2
1
Removing Modules
1.
Insert the removal tool FWF
ODE from the front
2.
Push the module back with
thumb.
2
2
Amphenol ®
Amphenol Pcd – 2 Technology Drive – Peabody – Massachussetts – 01960 USA
Tel. :+ 1 978-532-8800 x273 Fax : + 1 978-532-680
www.fwfield.com
Plug :
« 6 » Shell
Receptacles :
« 2 » Shell
Square
Flange
Panel Drilling
« 7 » Shell
Jam Nut
Panel Drilling
« 2PE » and « 7PE »
Shells
with Backshell to protect
the termination from dust,
shocks and vibration.
Backshell used with IEEE 1394 Receptacle
Backshell used with PCB Receptacle back-
termination - (Type 2)
with back-termination - (Type 1)
Non sealed version
Sealed version – IP67
Back Terminations :
View of the PCB
Type 2 version -
Front
with 6 tined holes
for solder
termination
Back
Type 2 : Solder
6 Tined holes for soldering
Type 1 : IEEE 1394 Receptacle
3
Amphenol ®
Amphenol Pcd – 2 Technology Drive – Peabody – Massachussetts – 01960 USA
Tel. :+ 1 978-532-8800 x273 Fax : + 1 978-532-680
www.fwfield.com
Part Number Code
FW F TV
2
1
G
IEEE 1394 Field TV
Shell Type
Plug
6 :
Square Flange Receptacle
2 :
Square Flange Receptacle with backshell
2PE :
Jam Nut Receptacle
7 :
Jam Nut Receptacle with backshell
7PE :
Back Terminations (Receptacles only)
IEEE 1394 receptacle
Solder Board (6 tined holes)
1 :
2 :
Shell Plating
Nickel
Olive Drab Cadmium
N :
G :
Examples :
- Olive Drab Cadmium Plug : FWF TV 6G
- Olive Drab Cadmium Square Flange Receptacle, IEEE 1394 front & back : FWF TV 21G
- Olive Drab Cadmium Jam Nut Receptacle, IEEE 1394 front and back : FWF TV 71G
- Nickel Jam Nut Receptacle, solder board termination : FWF TV 72N
Square flange receptacle with Self Closing Cap (cap with a spring inside) :
FWF 21N SCC (*)
Nickel and metallized inserts (EMI)
(*) This P/N includes the square flange
receptacle and the self closing cap
!
w
e
FWF 21B SCC (*)
Black and blank insert
N
Note : Panel gasket to use with this version only : JE18
Accessories
• Metallic Caps
FWF TVC
2
G
Connector Type
Plug
6 :
2 :
7 :
Plug Cap
Receptacle Cap
Square Flange Receptacle
Jam Nut Receptacle
Shell plating
Nickel
Olive Drab Cadmium
N :
G :
Square flange
receptacle cap end
Jam Nut receptacle
cap end
Plug Cap end
• Panel Gasket for square flange receptacle (Thickness : 0,8 mm [.031]) : JE15
• Receptacle Insert removal tool : FWF ODE
4
Amphenol ®
Amphenol Pcd – 2 Technology Drive – Peabody – Massachussetts – 01960 USA
Tel. :+ 1 978-532-8800 x273 Fax : + 1 978-532-680
www.fwfield.com
相关型号:
©2020 ICPDF网 联系我们和版权申明