L717DA15PCVF2 [AMPHENOL]
D Subminiature Connector,;型号: | L717DA15PCVF2 |
厂家: | Amphenol |
描述: | D Subminiature Connector, |
文件: | 总117页 (文件大小:72336K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
D-SUBMINIATURE
C
ONNECTORS
ACCESSORIES
STANDARD DENSITY
SURFACE MOUNT RECEPTACLES
HIGH DENSITY
GENERAL DESCRIPTION:
Amphenol’s line of D-Subminiature rack and panel connectors is part of an industry standard for applications requiring reliable,
rugged, connectors. These connectors are designed to accommodate rack and panel, cable to panel and cable to cable applications.
D-Subminiature connectors are pin and socket devices that employ contacts encased in a molded dielectric insert surrounded by a
"D" shaped shell for polarization.
MARKETS:
Amphenol D-Subminiature connectors can be used in commercial, industrial or military markets. We offer a broad selection of
dielectric materials and contact styles and configurations to meet all of your design requirements.
APPLICATIONS INCLUDE:
•
•
•
•
•
•
Business equipment
Electronic office systems
Data communications
Medical equipment
Mobile communications
Consumer electronics
AMPHENOL D-SUB FEATURES:
•
•
•
Industry standard interfacing RS232 and RS449 mating
configurations per EIA standards.
UL Component Recognition File number E64911
(617, 841, 17, 17D, 17HD, ED, 17RR, 17SD, 117DF, 17BH, 17TW
Variations available:
Solder cup
Straight pc mount solder
Right angle pc mount solder
Solderless wire wrap
Crimp
High Density Right Angle
High Density Straight
Stacked Right Angle PC mount
Surface mount
•
Five shell sizes offer widest choice of contact positions:
9, 15, 25, 37 and 50 in standard density and 15, 26, 44, 62
and 78 positions in high-density.
•
•
Inserts are flame-retardant thermoplastic.
Accessories for all applications are available including strain
reliefs, cable clamps, shielded backshells, mating hardware
and connector to pc board mounting hardware.
•
•
Automatic and manual tooling is available for both crimp and IDC versions.
Contact Amphenol for lease information.
Dimensions and characteristics are subject to change without notice.
High Density
17E BH/HD SERIES
SPECIFICATIONS:
MATERIALS AND PLATINGS
Shells
Steel, tin plated,
grounding indents on plug.
Copper alloy
Engagement area: gold
(see ordering information).
150µ" (3.81µm) tin/lead
50µ" (1.27µm) entire contact
Contact Material
Contact Plating
Termination End
Nickel Underplate
Amphenol’s High Density
D-Subminiature connectors
ELECTRICAL DATA
compleme nt Amphenol’s extensive
D-Subminiature connector line.
This line of connectors offers many
superior features, high performance
level and low installation cost.
Current Rating
Voltage Rating
Dielectric Withstanding Voltage 1000 VAC (minimum)
Dielectric
3 Amps maximum per contact
125 VAC
Glass filled thermoplastic,
black, UL 94 VO
5,000 Megaohms (minimum)
15 Milliohms (maximum)
Insulation Resistance
Contact Resistance
The connector configurations
are available in 15, 26, 44, 62
and 78 positions.
CLIMATIC DATA
Operating Temperature
-67°F (-55°C) to 221°F (105°C)
The product offering includes PCB
mount connectors in both straight
or right angle termination styles.
Straight PCB mount are available in
both Fixed Screw Machine and
Stamped and Formed contacts,
while Right Angle PCB mount are
only available with Stamped and
Formed contacts.
A cable mount version with solder
terminations is also available, which
can be combined with Amphenol’s
standard line of shielded or
unshielded backshells.
• Industrial
• Telecom
• Any industry standard
I / O connections
INCHES (MM)
2
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
High Density / Right Angle, PC Mount
Front Metal Shell, .350 (8.89) Footprint / Fixed Contact
17E BH/HD SERIES
DIMENSIONS FOR 15 - 62 POSITION (3 ROW)(SHOWN WITH FIXED FEMALE SCREWLOCKS) DIMENSIONS FOR THE 78 POSITION (4 ROW)
ORDERING INFORMATION
17
E
BH Series High Density D-Sub
Front Metal Shell, Right-Angle PC Mount
17EBH 0XX - X - XX - X - XX
Series
PCB Mount Options
00
10
Clear hole
Arrowhead Board
Number Of Positions
15, 26, 44, 62, 78
Panel Mounting Options
Type
0
1
2
.120 (3.05) Clear Hole
#4-40 Threaded Hole
#4-40 Fixed Female Screw
P
S
Pin (male)
Socket (female)
Plating Code
AA
Gold Flash over Nickel
AM 30µ" (.76µm) Gold over Nickel
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
3
High Density
17EHD SERIES
Solder Cup And Straight P.C. Mount / Double Metal Shell Fixed Contact
DIMENSIONS
Panel Mount Options
(standoff)
1 = .190 (5.8)
3 = .124 (3.8)
ORDERING INFORMATION
17E HD Series High Density D-Sub
Solder Cup & Straight P.C. Mount, Front Metal Shell Fixed Contact
17EHD 0XX - X - XX - X - XX
Series
Termination Types:
00
30
32
33
Solder Cup
Board-mount, Vertical
Board-mount, Vertical with Boardlocks
Board-mount, Vertical with standoff,
no boardlock
Number Of Positions
15, 26, 44, 62 ,78
Type
P
S
Pin (male)
Socket (female)
Panel Mounting Options:
0
1
2
3
.120 (3.05) Clear Hole
#4-40 Threaded Hole .190 (5.8)
#4-40 Fixed Female Screwlock
#4-40 Threaded Hole .124 (3.8)
Plating Code:
AA Gold Flash over Nickel
AM 30µ" (.76µm) Gold over Nickel
INCHES (MM)
4
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
Right-Angle Board Mount Connectors
Front Metal Shell
6E17 SERIES
SPECIFICATIONS:
MATERIALS AND PLATINGS
Shells
Steel, tin plated
Precision formed copper alloy
Gold over nickel
Engagement: 12 oz. max. (340.2 g)
Separation: .75 oz. min. (21.26 g)
Contacts
Contact Plating
Contact Forces
ELECTRICAL DATA
Current Rating
Dielectric Withstanding Voltage
Dielectric
5 amps
1000 VAC/60 sec.
Glass filled thermoplastic,
black, UL 94 VO
15 milliohms max.
Contact Resistance
Amphenol's 6E17 series of right angle
commercial connectors provide high
performance at competitive prices.
CLIMATIC DATA
Temperature Range
-67°F (-55°C) to 221°F (105°C)
The front metal shell helps to provide
reduced EMI/ RFI emissions, and the
contacts are selectively plated to
provide additional high performance.
The 6E17 series are available in a
variety of board mounting and
grounding options including
arrowhead boardlocks and #4-40
threaded inserts.
Front mounting holes are also
available threaded, un-threaded and
with installed female hex screwlocks.
• Industrial
• Telecom
• Any industry standard
I / O connections
INCHES (MM)
8
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668
Right-Angle Board Mount Connectors
Front Metal Shell
6E17 SERIES
DIMENSIONS
ORDERING INFORMATION
6E17 X - 0XX - X - XX - X - XX - X
Series
Variation Code
E for U & Y Footprint
Number of Contacts
09, 15, 25, 37
Contact
20
Housing Characteristics
Tin plated receptacle
21
Tin plated plug with grounding indents
.318
.590
Description of PC
Board Mounting
Characteristics
(8.08)
(14.99)
Style
Code
Panel Mounting Options
.120 (3.05) clear hole
#4-40 threaded hole
#4-40 threaded hole with female screwlock
Fixed female round screwlock
Footprint Footprint
0
1
2
4
.120 (3.05) diameter mtg hole
with wrap-around ground strap
spit arrowhead boardlock
.120 (3.05) diameter mtg hole
#4-40 threaded mtg hole
A
C
D
J
A
B
C&E
D
U
Y
Code
BF
Contact Plating
split arrowhead boardlock
F
Engagement area 3µ" (.076µm) gold flash,
terminal end area 100µ"/200µ (2.54µm/5.08µm)
tin/lead underplate of 50µ" (1.27µm) nickel
Engagement area 15µ" (.381µm) gold flash,
terminal end area 100µ"/200µ (2.54µm/5.08µm)
tin/lead underplate of 50µ" (1.27µm) nickel
Engagement area 30µ" (.76µm) gold,
Code
P
S
Contact Type
Pin (male)
Socket (female)
CF
AJ
terminal end area 100µ"/200µ (2.54µm/5.08µm)
tin/lead underplate of 50µ" (1.27µm) nickel
For filtered version, see page 56.
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
9
Dual Port Connectors
6E17 H SERIES
SPECIFICATIONS:
MATERIALS AND PLATINGS
Shells
Steel, tin plated
Precision formed copper alloy
Gold over nickel
Engagement: 12 oz. max. (340.2 g)
Separation: .75 oz. min. (21.26 g)
Contacts
Contact Plating
Contact Forces
ELECTRICAL DATA
Amphenol's 61E7 series dual port
connectors are a state of the art
design. The front metal shell helps
reduce EMI/RFI emissions.
Current Rating
5 amps
Dielectric Withstanding Voltage 1000 VAC/60 sec.
Dielectric
Glass filled thermoplastic,
black, UL 94 VO
Contact Resistance
15 milliohms max.
Contacts are selectively plated for
high performance at a low cost.
CLIMATIC DATA
Temperature Range
-67°F (-55°C) to 221°F (105°C)
Designed to save PC board space,
Amphenol’s dual port “D” provides
two input output connectors in a
minimal amount of board space.
These connectors are available
with various stacking options:
same gender, mixed gender
and multiple pin counts.
INCHES (MM)
10
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
Dual Port Connectors
6E17 H SERIES
DIMENSIONS
Product Description
Bottom
Dimensions
Code
Letter
Top
Connector Connector
E
F
Pin
Socket
Socket
Pin
A
B
C
D
E
Pin
Socket
Pin
0.900 0.010
(22.86 0.25)
1.415
(35.94)
Socket
Pin
Pin
Socket
Socket
Pin
F
Socket
Pin
0.750 0.010
(19.05 0.25)
1.265
(32.13)
G
H
J
Socket
Pin
Pin
Socket
Socket
Pin
K
L
Socket
Pin
0.625 0.010
(15.88 0.25)
1.140
(28.96)
M
Socket
ORDERING INFORMATION
6E17H X - XX - X - XX - X - XX - X
Series
6E17H Dual port;
right angle solder tail
Variation Code
L for .311 (7.89) Footprint
Code
Housing Characteristics
Code Boardlock
00
Steel shell, tin plated receptacles without
grounding dimples (options B, F, K)
Steel shells, tin plated plugs with grounding
dimples (options A, E, J)
Steel shells, tin plated, plug shell with grounding dimples
and receptacle shell without dimples (options C,G,L,D,H,M)
C
O
Boardlock option
No PC boardlock
01
03
Code Number of Contacts
18
30
50
74
40
2 x 9
15
34
43
15 over blank
9 / 25
25 / 9+9
2 x 15
2 x 25
2 x 37
15 / 25
Code
Panel Mounting Options
120" clear hole
#4-40 threaded hole
0
1
2
H15A VGA / Triple Audio
#4-40 threaded hole with female screwlock
Consult factory for other available configurations
Code
Contact Plating
BF
Engagement area 3µ" (.076µm) gold flash,
terminal end area 100µ"/200µ" tin/lead, (2.54µm/5.08µm)
tin/lead underplate of 50µ" (1.27µm) nickel
Engagement area 15µ" (.381µm) gold flash,
terminal end area 100µ"/200µ" (2.54µm/5.08µm)
tin/lead underplate of 50µ" (1.27µm) nickel
Engagement area 30µ" (.76µm) gold, terminal end area
100µ"/200µ (2.54µm/5.08µm) tin/lead underplate
of 50µ" (1.27µm) nickel
Product Description
58.064
(22.86)
48.388
(19.05)
40.31
(15.87)
Spacing
Top
Connector
Bottom
Connector
Spacing
Spacing
CF
AJ
A
B
C
D
E
F
G
H
J
K
L
Pin
Socket
Pin
Pin
Socket
Socket
Pin
M
Socket
For filtered version, see page 55.
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
11
High Temperature
Straight Board Mount Connectors
6E17S SERIES
SPECIFICATIONS:
MATERIALS AND PLATINGS
Shells
Steel/nickel plated
Precision formed copper alloy
Gold over nickel
Contacts
Contact Plating
ELECTRICAL DATA
Current Rating
Voltage Rating
Dielectric
5 amps
600 V
Glass filled thermoplastic,
black, UL 94 VO
10 milliohms (max.)
Contact Resistance
Amphenol’s high temperature,
low profile D-Sub connector gives
you a high quality, reliable
CLIMATIC DATA
commercial connector to meet
today’s market demands.
Temperature Range
Environmental:
-67°F (-55°C) to 302°F (150°C)
IR-Air Convection
Process Compatibility
500°F (260°C) for 20 seconds
INCHES (MM)
14
TELEPHONE:(416)754-5656FAX:(416)754-8668E-MAIL:SALES@AMPHENOLCANADA.COM
High Temperature
Straight Board Mount Connectors
6E17S SERIES
DIMENSIONS
ORDERING INFORMATION
6E17S C - 0XX - X - XX - X - XX
Series
Code
20
21
Housing Characteristics
Tin plated receptacle
Tin plated
Code
C
O
Boardlock
Split arrowhead boardlock
No boardlock
Code
1
2
Panel Mounting Options
#4-40 threaded hole
#4-40 threaded hole with
female screwlock
Number of contacts
9, 15, 25 or 37
3
M-3 threaded hole
Code
Gender
P
S
Pin (male)
Socket (female)
Code
Contact Plating
BJ
Engagement area 10µ" (2.54µ) gold,
terminal end area 100µ"/200µ" (2.54µ/5.08µ)
-tin/lead, underplate of 50µ" (1.27µ) nickel
Engagement area 30µ" (.76µ) gold,
AJ
terminal end area 100µ"/200µ" (2.54µ/5.08µ)
-tin/lead, underplate of 50µ" (1.27µ) nickel
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
15
ED-EHD
D-Sub connectors - Screw-machined contacts
STANDARD AND HIGH DENSITY
WATERPROOF CONNECTORS
The 17ED and 17EHD series are
suitable for waterproof applications.
Materials and Platings
Shells
Body
Steel 2.5µm(100µ”) min tin over 1.25µm(50µ”) min nickel
Glass-filled thermoplastic
The machined contacts provide
robustness and reliability.
Flame retardant to UL94 V-0 Color Black
Copper alloy(Brass for plug, Phospher bronze for socket)
gold over 1.25µm(50µ”) min nickel
Contacts
This series offers:
- Panel mount connectors with
solder cup, straight and right
angle PCB terminations.
Boardlock
Standoff
Copper alloy, 100µ” min. sn over 50µ” min. nickel.
Copper alloy, 100µ” min. sn over 50µ” min. nickel.
Connectors are waterproof unmated.
Electrical Data
Current rating
Voltage rating
5.0A
300V rms at 50Hz
Insulation resistance
Contact resistance
>5000MΩ
Harsh environment
connectors
20mΩ Max.
Climatic Data
Operating temperature -55°C to +85°C
Salt spray
48 hours
Waterproof rating
IP 67 minimum
Mechanical Data
Mating and unmating force
Unit: kg (lb)
• Marine electronic devices
• Industrial electrical
• Security Monitoring
• Robotics
No. of Cts
ED
EHD
ED
9
EHD
15
Mate (max) Unmate (min) Mate (max) Unmate (min)
3.05 (6.74)
5.09 (11.24)
8.44 (18.66)
0.36 (0.79)
0.46 (1.01)
0.81 (1.80)
3.81 (8.42)
5.95 (13.16)
9.26 (20.46)
0.52 (1.14)
1.05 (2.32)
1.37 (3.02)
• Lighting systems
15
25
26
44
Mating cycles
Gold flash
: 100 cycles
0.76µm (30µ”) : 500 cycles
Termination
Solder cup (blank) :
6.5 (0.256)
8.2 (0.323)
5.8 (0.228)
Standard density
High density
Straight PCB with standoff and boardlocks:
8.2 (.323)
7.9 (.311)
4.0 (.157)
4.0 (.157)
Standard density
High density
Right angle PCB with brackets and boardlocks:
10.9 (0.429)
10.9 (0.429)
3.5 (0.138)
ø0.6(.024)
6.7 (0.263)
2.84 (0.112)
ø0.6(.024)
5.58 (0.219)
2.54 (0.100)
2.54 (0.100)
Standard density
High density
Right angle PCB without brackets and boardlocks:
10.9 (0.429)
10.9 (0.429)
5.58 (0.219)
2.54 (0.100)
3.5 (0.138)
ø0.6(.024)
2.54 (0.100)
6.7 (0.263)
2.84 (0.112)
ø0.6(.024)
Standard density
High density
Shell Size Dimensions
A
B
F / F’
B’
E
D D’
C
3.85
SHELL Contact
A
±0.25
B
B’
+0.20 / 0
C
±0.10
D
D’
+0.25 / 0
E
±0.25
F
F’
±0.10
SIZE
P: pin
S: socket
0 / -0.20
(0/-.008
0 / -0.25
(0/-.010)
+0.10/-0.20
(+.004/-.008)
(±.010)
(+.008/0)
(±.004)
(+.010/0)
(±.010)
(±.004)
P
S
39.4
16.8(0.661)
25.1(0.988)
28.8(1.528)
25.0
8.2(0.325)
8.2(0.325)
8.2(0.325)
21.0
5.9(0.232)
5.9(0.232)
5.9(0.232)
E
(1.551) 16.4(0.646)
(0.984) 8.0(0.315)
(0.827) 6.2(0.244)
P
S
47.7
33.3
21.0
A
(1.878) 24.8(0.976)
(1.311) 8.0(0.315)
(0.827) 6.2(0.244)
P
S
64.5
47.0
21.0
B
(2.539) 38.5(1.513)
(1.850) 8.0(0.315)
(0.827) 6.2(0.244)
Panel cutouts
PANEL THICKNESS
2.0 Max
A
B
R1.5
R1.5
A
B
SHELL
SIZE
±0.10(±.004)
28.8 (1.111)
36.5 (1.438)
51.0 (2.009)
0 / -0.10(0 / -.004)
20.0 (0.788)
E
A
B
28.0 (1.103)
41.5 (1.635)
Connector Dimensions
2
5mm
4
3
6mm
1
5
NO
2
Description
Housing
Material
Qty
Black thermoplastic UL 94-VO
1
1
1
2
2
1
Front shell
Steel tin plated
3
Ring
Silicone
4
#4-40 Front screw lock
#4-40 Front screw lock
Brass tin plated
5
Brass tin plated
How to order
L17 ED ... ... ... ...
contact plating:
0 : gold flash
1 : 0.38µm gold (15µ”)
2 : 0.76µm gold (30µ”)
L17ED: standard density series
L17EHD: high densty series
Number of contacts
Termination:
Standard density: 9, 15, 25
0 : Solder cup
High density:
15, 26, 44
1 : Straight PCB without
stand-off or boarlocks
2 : Straight PCB with stand-off
and boarlocks
3 : Right angle PCB without
brackets or boarlocks
4 : Right angle PCB with
brackets and boarlocks
Contact type:
P : Pin
S : Socket
For special request, please consult factory
Do not hesitate to contact us for further information
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
TW
Hybrid D’Sub series
Specifications
Amphenol D’Sub TW Hybrid Series permits
a mix of contacts including signal, power,
shielded, high voltage and fiber optics in the
same housing with 18 different contacts
arrangements.
• Connectors according to: MIL C24308 - NFC93425 - HE507
Materials and platings
Electrical Data
Shells
Steel-Tin plating Current rating
Signal contacts
Power contacts
PCB terminations
Solder cup terminations
Crimp terminations
Shielded contacts
Voltage rating
Signal and power contacts 300 V.R.M.S. at 50 Hz
Shielded contacts
Shielded contacts
Frequency range
Attenuation
V. S. W. R.
Characteristic impedance
Dielectric withstanding
voltage
Insulation resistance ≥ 5000 M Ohms at 500 VDC
Contact resistance
Shell resistance
7.5 A. with 10 A. peaks
This economic series was fist developed from
our military series, and has improved features:
Insulators
Signal contacts
Material
Plating finish
Or
Shielded contacts
Material
Plating
Inner conductor
Outer ring
Terminations
Except solder cup and crimp terminations gold flash
Power contacts
Material
Plating
Contacts
Terminations
Except solder cup and crimp terminations gold flash
High temperature black thermoplastic
Female: machined bronze
10 to 40 A.
10 to 40 A.
10 to 40 A.
0.5 A.
Male: machined brass
16µ “Au over 79µ” Ni min.
30µ” Au over 79µ” Ni min.
- new contacts
- new high temperature black thermoplastic insert
- PCB configurations come preloaded with
fixed contacts and brackets.
Female: machined bronze
Male: machined brass
150 V.R.M.S. at 50 Hz
These connectors are supplied with screw
machined contacts which are fixed in the insulator.
16µ “Au or 30µm Au over 79µ” Ni
10µ “Au over 79µ” Ni
Tinned
0-1 GHz
0.2dB
1.4(+0.04/GHz)
50 Ohms
Acomplete range of housings are also
available for cable application.
Female: machined bronze
Male: machined brass
A full range of
arrangements
compatible with
reflow process
≥ 1000 V.R.M.S. at 50Hz
16µ “Au or 30µ” Au over 79µ” Ni
Tinned
≤ 5m Ohms
≤ 1m Ohm
Brackets
Steel-Tin plating
Brass-Tin plating
Brass-Tin plating
Bronze-Tin plating
Brass-Tin plating
(electrical grounding)
Front jackscrews
Rear clinch nuts
Boardlocks
Stand-off
• Commercial
Climatic Data
Mechanical data
With or without dimples
Operating temperature
-55˚C + 155˚C Shells
• Medical
(with peaks up to 180˚C)
56 days (40˚C - 95% HR)
48 hours
Contact retention force in dielectric material > 40N
• Industrial
• Telecom
Damp heat
Salt spray
Maximum mating and unmating force
With dimples
E size = 70 N
A size = 80 N
B size = 100 N
C size = 150 N
D size = 180 N
E size = 30 N
A size = 50 N
B size = 80 N
C size = 120 N
D size = 160 N
• Any application requiring
optimization of space
Without dimples
Compatible with process
IR - Air convectioned
260˚ for 20 s.
Resistance to solder iron heat
260˚C for 30 s.
Mating cycles
Blind mating system
≥ 200 (classe ll) or 500 (classe l)
Available upon request
Polarization
Available with locking accessories
Consult factory
Shell and contacts plating
CLASS ll
0.4µm (16µ”) Au contacts gold plating
200 mating cycles
CLASS l
0.76µm (30µ”) Au contacts gold plating
500 mating cycles
Types
Shells and plating
Types
Shells and plating
Tin plated shell
*Male and female
Tin plated shell
*Male and female
77 TW
177 TW
777 TW
Tin plated shell with dimples
Male only
Tin plated shell with dimples
Male only
717 TW
Housing arrangements
Male front view
Arrangement ......
Shell size ............
5W1
E
7W2
A
11W1
A
Arrangement ......
Shell size ............
3W3
A
5W5
B
9W4
B
Arrangement ......
Shell size ............
13W3
B
17W2
B
21W1
B
Arrangement ......
Shell size ............
27W2
C
13W6
C
17W5
C
Arrangement ......
Shell size ............
21W4
C
8W8
C
25W3
C
Arrangement ......
Shell size ............
24W7
D
36W4
D
43W2
D
2
Shell size dimensions
A
B
F
1.5
10˚
0.9
H
B’
J
D’ D E
G
ø 3.1
G
Contact
P: Pin
S: Socket
A
B
B‘
C
D
D‘
E
F
F‘
G
G‘
H
J
Shell
size
±0.25
(±.010)
0/-0.20
+0.20/0
±0.10
(±.004)
0/-0.25
+0.25/0
±0.20
+0.05/-0.20 +0.10/-0.20 +0.10/-0.20
±0.10
+0.10/-0.40
0/-0.50
(0/-.008) (+.008/0)
(0/-.010) (+.010/0)
(±.008) (+.002/-.008) (+.004/-.008) (+.004/-.008) (±.004) (+.004/-.016) (0/-.020)
16.8
(.661”) 25.0
(.984”)
8
.2
10.9
5.9
P
S
P
S
P
S
P
S
P
S
12.4
19.4
11.0
30.7
(.323”)
(.429”)
(.232”)
E
A
B
C
D
(.488”)
(.764”) (.433”)
(1.209”)
16.4
8.0
11.1
6.2
(.646”)
(.315”)
(.437)
(.244”)
25.1
(.988”)
8.2
(.323”)
10.9
(.429”)
5.9
(.232”)
12.4
(.488”)
27.7 11.0
(1.091”) (.433”)
39.0
(1.535”)
33.3
(1.311”) 8.0
(.315”)
24.8
(.976”)
11.1
(.437)
6.2
(.244”)
38.8
(1.528”)
8.2
(.323”)
11.0
(.433”)
5.8
(.228”)
12.4
(.488”)
41.4 11.0
(1.630”) (.433”)
52.9
(2.083”) 38.5
(1.513”)
47.0
(1.850”) 8.0
11.1
(.437)
6.2
(.244”)
(.315”)
55.3
(2.177”)
8.2
(.323”)
11.0
(.433”)
5.8
(.228”)
12.4
(.488”)
57.9 11.0
(2.280”) (.433”)
69.2
(2.724”)
63.5
(2.500”)
54.9
(2.161”)
8.0
(.315”)
11.1
(.437)
6.2
(.244”)
52.7
(2.075”)
11.0
(.433”) 15.2
(.598”)
11.0
(.433”)
5.8
(.228”) 55.5 13.8
(2.185”) (.543”)
66.8
(2.630”)
61.1
(2.406”)
52.5
(2.067”)
10.9
(.429”)
11.1
(.437)
6.2
(.244”)
Panel cutouts
Optimal cutout for rear mounting
Standard cutout
A
A
B
B
10˚
10˚
øG
G H
F
E
D
D
R
Rd Rading J
Rd Rading J
C
C
A
B
C
D
E
F
G
H
J
Shell
size
Mounting
method
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
22.2
(.874”)
20.5
(.807”)
30.5
(1.201”)
28.8
(1.134”)
44.3
(1.744”)
42.5
(1.673”)
60.7
(2.390”)
59.1
(2.327”)
58.3
11.1
(.437”)
10.2
(.402”)
15.3
(.602”)
14.4
(.567”)
22.1
(.870”)
21.3
(.839”)
30.4
(1.197”)
29.5
(1.161”)
29.2
13.0
(.512”)
11.4
(.449”)
13.0
(.512”)
11.4
(.449”)
13.0
(.512”)
11.4
(.449”)
13.0
(.512”)
11.4
(.449”)
15.8
6.5
(.256”)
5.7
(.224”)
6.5
(.256”)
5.7
(.224”)
6.5
(.256”)
5.7
(.224”)
6.5
(.256”)
5.7
(.224”)
7.9
2.1
(.083”)
3.4
(.0134”)
2.1
(.083”)
3.4
(.0134”)
2.1
(.083”)
3.4
(.0134”)
2.1
(.083”)
3.4
(.0134”)
2.1
Front
Rear
Front
Rear
Front
Rear
Front
Rear
Front
Rear
25.0
12.5
3.0
1.5
E
A
B
C
D
(.984”)
(.492”)
(.118”)
(.059”)
33.3
(1.311”)
16.7
(.657”)
3.0
(.118”)
1.5
(.059”)
47.0
(1.850”)
23.5
(.925”)
3.0
(.118”)
1.5
(.059”)
3
63.5
(2.500”)
31.7
(1.248”)
3.0
(.118”)
1.5
(.059”)
(2.295”)
56.3
(2.217”)
(1.150”)
28.2
(1.110”)
(.622”)
14.1
(.555”)
(.311”)
7.1
(.280”)
(.083”)
3.4
(.0134”)
61.1
(2.406”)
30.6
(1.205”)
3.0
(.118”)
1.5
(.059”)
Straight connector footprint
1
A
2
A
3
A
B
B
B
Signal tail 0.6 mm Dia. (.0236”)
1.6 mm (.063”)PCB
For other PCB thickness: consult factory.
Dimensions
Description
a
b
4.80 mm
(.198”)
7.2 mm
(.283”)
Power (.126” tail dia.)
Power (.0787” tail dia.)
Shielded
1
1
3
2
4.80 mm
(.198”)
7.2 mm
(.283”)
4.00 mm
(.157”)
7.2 mm
(.283”)
5.00 mm
(.196”)
11.50 mm
(.453”)
Signal
Straight contact combinations
Arrangement with signal contacts
Arrangement without signal contacts
3W3 - 5W5 - 8W8
See above dimensions
Size 8 and 20 Contacts
See above dimensions
Size 8 Contacts
Power only
3.2 mm DIA. (.126”)
(20 to 40 A)
Power 3.2 mm DIA. (.126”)
(20 to 40 A) and signal
P 3SY
P 2SY
P 3Y
Power 2 mm DIA. (.0787”)
(10 to 20 A) and signal
Power only
P 2Y
CY
2 mm DIA. (.0787”)
(10 to 20 A)
CSY
SY
Shielded and signal
Signal only
4
Shielded only
Signal (Size 20)
No reference
with solder cup terminations
Housing preloaded with contacts
Right angle connector footprint
1
2
3
B
B
B
C
C
C
A
A
A
Signal tail 0.6 mm Dia. (.0236”)
1.6 mm (.063”) PCB
For other PCB thickness: consult factory.
Europe
Mix
MIL
HE 5 pattern =
- Europ. height
- Europ. footprint
pitch between
Mixed pattern =
- MIL height
MIL pattern =
- MIL height
- MIL footprint
pitch between
- Europ. footprint
pitch between
2 rows: .100”
2 rows: .100”
2 rows: .112”
a
Description
a
b
c
a
b
c
b
-
c
-
10.30mm 6.30mm 10.00mm 10.30mm 6.30mm 10.00mm
(.406”) (.248”) (.394”) (.406”) (.248”) (.394”)
-
Shielded
1
2
3
3
10.30mm 7.20mm 11.20mm 10.30mm 6.30mm 9.50mm 8.10mm 6.30mm 9.50mm
(.406”) (.283”) (.441”) (.406”) (.248”) (.374”) (.319”) (.248”) (.374”)
Signal
11.57mm 7.20mm 10.50mm 11.57mm 6.30mm 9.50mm 9.52mm 6.30mm 9.50mm
(.456”) (.283”) (.413”) (.456”) (.248”) (.374”) (.375”) (.248”) (.374”)
Power (.0787” tail dia.)
Power (.126” tail dia.)
21.46mm 7.20mm 10.50mm 21.46mm 6.30mm 9.50mm 21.46mm 6.30mm 9.50mm
(.845”) (.283”) (.413”) (.845”) (.248”) (.374”) (.845”) (.248”) (.374”)
Note: above dimensions correpond to sizes E to C. Consult factory for D sizes.
Connector comes equiped with contacts and brackets.
Right angle contacts combinations
Arrangement with signal contacts
Arrangement without signal contacts
3W3 - 5W5 - 8W8
European
footprint
Mixed
footprint
MIL (U.S.)
footprint
Size 8 and
20 Contacts
European
footprint
Mixed
footprint
MIL (U.S.)
footprint
Size 8 contacts
only
Power 3.2 mm
DIA. (.126”) (20 to
40 A) and signal
Power only
3.2 mm DIA. (.126”)
(20 to 40 A)
EP3SV
EP2SV
HP3SV
HP2SV
MP3SV
MP2SV
EP3V
HP3V
MP3V
Power 2 mm
DIA. (.0787”) (10 to
20 A) and signal
Power only
2.0 mm DIA. (.0787”)
(10 to 20 A)
EP2V
-
HP2V
HCV
MP2V
MCV
5
-
HCSV
HSV
MCSV
MSV
Shielded and signal
Signal only
Shielded only
ESV
Mounting options
Right angle version
Connectors come equiped with metal brackets
BLANK: 3.10mm (.122”) dia mounting hole
RM6: metal brackets + boardlock
Metal bracket
RM6
Straight version
BLANK: 3.10mm (.122”) dia mounting hole
RM54: RM5 4.40 threaded
RM53: RM5 M3 threaded
7.2 (.283)
RM5
RM8
RM84: RM8 4.40 threaded
RM83: RM8 M3 threaded
A514: blind mating system
FM: float mounting system
3.5
(.137)
ø2.2 (.086)
3.6 max.
(.141 max.)
19.9
(.783)
Straight and right angle version
4R: 4.40 rear nut
3R: M3 rear nut
4F: 4.40 front female screwlock
3F: M3 front female screwlock
6
High power contacts
Solder cup version
22
(.866”)
22
(.866”)
øA
øA
øB
øB
P/N
Dimensions
Current
Plug
Socket
A mm (inch)
B mm (inch)
2.55 (.100”)
3.70 (.145”)
5.60 (.220”)
L 17DM 53745-8
L 17DM 53745-7
L 17DM 53745-1
L 17DM 53744-7
L 17DM 53744-6
L 17DM 53744-1
10 to 20 Amp.
20 to 30 Amp.
30 to 40 Amp.
1.80 (.071”)
2.80 (.110”)
4.80 (.189”)
Trim dimensions: 7.5 mm (.295”)
Crimp version
øB
øB
22
(.866”)
22
(.866”)
øA
øA
P/N
Dimensions
Current
Plug
Socket
A mm (inch)
1.80 (.071”)
2.80 (.110”)
4.80 (.189”)
B mm (inch)
2.55 (.100”)
3.70 (.145”)
5.60 (.220”)
L 17DM 53745-208
L 17DM 53745-207
L 17DM 53744-207
L 17DM 53744-206
L 17DM 53744-201
10 to 20 Amp.
20 to 30 Amp.
30 to 40 Amp.
L 17DM 53745-201
Trim dimensions: 7.5 mm (.295”)
Crimping tool for all sizes
L17D479SP
Extraction tool for sizes 8 cts
7
Straight shielded contacts
Crimp ferrule and inner solder
A
B
B
øD
øD
E
G
F
Type
P/N
Dimensions (inch)
Cable - RG
Trim dimensions (inch)
A Max
B
D
E
F
G
plug
plug
plug
plug
L17DM 53740 18.8 (740”) 23.6 (.929”) 1.0 (.039”)
178 B/U
7.9 (.311”) 6.3 (.248”) 2 (.078”)
L17DM 53740-1 18.8 (740”) 23.6 (.929”) 1.7 (.066”) 179 B/U 316 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)
L17DM 53740-3 21.5 (846”) 23.6 (.929”) 2.8 (.110”)
L17DM 53740-5 21.5 (846”) 23.6 (.929”) 3.2 (.126”)
180 B/U
58 C/U
9.5 (.374”) 7.9 (.311”) 2 (.078”)
9.5 (.374”) 7.9 (.311”) 2 (.078”)
7.9 (.311”) 6.3 (.248”) 2 (.078”)
socket L17DM 53742 18.8 (740”) 23.6 (.929”) 1.0 (.039”)
178 B/U
socket L17DM 53742-1 18.8 (740”) 23.6 (.929”) 1.7 (.066”) 179 B/U 316 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)
socket L17DM 53742-3 21.5 (846”) 23.6 (.929”) 2.8 (.110”)
socket L17DM 53742-5 21.5 (846”) 23.6 (.929”) 3.2 (.126”)
180 B/U
58 C/U
9.5 (.374”) 7.9 (.311”) 2 (.078”)
9.5 (.374”) 7.9 (.311”) 2 (.078”)
Ferrule and inner solder
A
B
B
øD
øD
E
G
F
Type
P/N
Dimensions (inch)
Cable - RG Trim dimensions (inch)
A Max
short plug L17DM 53740-5000 17.0 (669”) 21.8 (.858”) 1.0 (.039”)
plug L17DM 53740-5001 18.8 (740”) 23.6 (.929”) 1.7 (.066”) 179 B/U 316 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)
B
D
E
F
G
178 B/U
7.9 (.311”) 6.3 (.248”) 2 (.078”)
plug L17DM 53740-5002 21.5 (846”) 26.3 (1.035”) 2.8 (.110”)
plug L17DM 53740-5005 21.5 (846”) 26.3 (1.035”) 3.2 (.126”)
plug L17DM 53740-5008 18.8 (740”) 23.6 (.929”) 1.0 (.039”)
short socket L17DM 53742-5000 17.0 (669”) 21.8 (.858”) 1.0 (.039”)
180 B/U
58 C/U
9.5 (.374”) 7.9 (.311”) 2 (.078”)
9.5 (.374”) 7.9 (.311”) 2 (.078”)
7.9 (.311”) 6.3 (.248”) 2 (.078”)
7.9 (.311”) 6.3 (.248”) 2 (.078”)
178 B/U
178 B/U
socket L17DM 53742-5001 18.8 (740”) 23.6 (.929”) 1.7 (.066”) 179 B/U 316 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)
socket L17DM 53742-5002 21.5 (846”) 26.3 (1.035”) 2.8 (.110”)
socket L17DM 53742-5004 21.5 (846”) 26.3 (1.035”) 3.2 (.126”)
socket L17DM 53742-50060 18.8 (740”) 23.6 (.929”) 1.0 (.039”)
180 B/U
58 C/U
9.5 (.374”) 7.9 (.311”) 2 (.078”)
9.5 (.374”) 7.9 (.311”) 2 (.078”)
7.9 (.311”) 6.3 (.248”) 2 (.078”)
178 B/U
8
Right angled shielded contact
Crimp ferrule and inner solder
A
E
F
G
A
Type
P/N
Dimensions (inch)
A Max
L17DM 53741 13.5 (.531”) 18.6 (.732”) 1.0 (.039”)
Cable - RG
Trim dimensions (inch)
B
D
E
F
G
plug
178 B/U
9.5 (.374”) 5.9 (.232”) 1.6 (.062”)
plug L17DM 53741-1 13.5 (.531”) 18.6 (.732”) 1.7 (.066”) 179 B/U 316 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)
plug L17DM 53741-3 13.5 (.531”) 18.6 (.732”) 2.8 (.110”)
plug L17DM 53741-4 13.5 (.531”) 18.6 (.732”) 3.2 (.126”)
socket L17DM 53743-2 13.5 (.531”) 18.6 (.732”) 1.0 (.039”)
180 B/U
58 C/U
10.7 (.421”) 7.9 (.311”) 2.4 (.094”)
10.7 (.421”) 7.9 (.311”) 2.4 (.094”)
9.5 (.374”) 5.9 (.232”) 1.6 (.062”)
178 B/U
socket L17DM 53743-3 13.5 (.531”) 18.6 (.732”) 1.7 (.066”) 179 B/U 316 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)
socket L17DM 53743-5 13.5 (.531”) 18.6 (.732”) 2.8 (.110”)
socket L17DM 53743-6 13.5 (.531”) 18.6 (.732”) 3.2 (.126”)
180 B/U
58 C/U
10.7 (.421”) 7.9 (.311”) 2.4 (.094”)
10.7 (.421”) 7.9 (.311”) 2.4 (.094”)
Ferrule and inner solder
B
B
C
E
G
C
F
øD
øD
Type
P/N
Dimensions (inch)
Trim dimensions (inch)
A Max
B
D
Cable - RG
E
F
G
plug L17DM 53741-5000 13.5 (.531”) 18.6 (.732”) 1.0 (.039”)
178 B/U
9.5 (.374”) 5.9 (.232”) 1.6 (.062”)
plug L17DM 53741-5001 13.5 (.531”) 18.6 (.732”) 1.7 (.066”) 179 B/U 316 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)
plug L17DM 53741-5003 13.5 (.531”) 18.6 (.732”) 2.8 (.110”)
plug L17DM 53741-5004 13.5 (.531”) 18.6 (.732”) 3.2 (.126”)
socket L17DM 53743-5000 13.5 (.531”) 18.6 (.732”) 1.0 (.039”)
180 B/U
58 C/U
10.7 (.421”) 7.9 (.311”) 2.4 (.094”)
10.7 (.421”) 7.9 (.311”) 2.4 (.094”)
9.5 (.374”) 5.9 (.232”) 1.6 (.062”)
178 B/U
socket L17DM 53743-5001 13.5 (.531”) 18.6 (.732”) 1.7 (.066”) 179 B/U 316 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)
socket L17DM 53743-5003 13.5 (.531”) 18.6 (.732”) 2.8 (.110”)
socket L17DM 53743-5004 13.5 (.531”) 18.6 (.732”) 3.2 (.126”)
180 B/U
58 C/U
10.7 (.421”) 7.9 (.311”) 2.4 (.094”)
10.7 (.421”) 7.9 (.311”) 2.4 (.094”)
Crimping tool
Hand crimp tool
227-0944 (without dies) (M 22 520/5-01)
RG cables
MIL reference
Amphenol P/N
dim. between 2 flat surface
cavity A
cavity B
RG 58 C/U
RG 178 B/U
RG 179 B/U
RG 180 B/U
M 22 520/5-05
M 22 520/5-03
M 22 520/5-03
M 22 520/5-05
227 1221-05
227 1221-03
227 1221-03
227 1221-05
5.41
-
-
3.25
-
2.67
-
4.52
Extraction tool
9
Extraction tool for sizes 8 cts
L17D429SP
Cabling instructions for shielded contacts
Straight crimp shielded contacts:
inner solder contact
outer crimp contact
soft solder
outer ring
coaxial shell
3.20
outer ring
braided shield
inner sleeve
crimp
Right angle crimp shielded contacts:
inner solder contact
outer crimp contact
inner sleeve
outer ring
coaxial shell
outer ring
crimp
3.20
soft solder cap into shell after cable
assembly on 90˚ type coaxes
soft solder
Assembly method
- Slide the outer ring over the cable jacket. Trim the cable
according to the recommended dimensions.
- Insert the cable dielectric and the center conductor inside
the inner sleeve.
- Slide the outer ring towards the inner sleeve ans recover
the braid.
- Using crimp hand tool equipped with the appropriate dies,
crimp in the area defined.
- Solder the central conductor to the shielded center
contacts.
Solder straight shielded contacts:
soft solder
outer ring
coaxial shell
outer ring
solder
braided shield
inner sleeve
Solder right angle shielded contacts:
coaxial shell
outer ring
inner sleeve
outer ring
solder
soft solder cap into shell after cable
assembly on 90˚ type coaxes
soft solder
Assembly method
- Slide the outer ring over the cable jacket. Trim the cable
according to the recommended dimensions.
- Insert the cable dielectric and the center conductor inside
the inner sleeve.
- Slide the outer ring towards the inner sleeve ans recover
the braid.
- Solder by introducing metal through the outer ring hole.
10
- Solder the central conductor to the shielded center
contacts.
How to build your part number
L
... TW... ... ... ... ... ...
RoHS Compliant
Special Deviations
Please consult factory
Contacts and Shell
Contact Plating
Shell
Tinned Tinned & Indents; Plug only
Board Mounting Options
For Straight
0.4µm(16µ”) Au
0.76µm(30µ”) Au
77
717
777
177
Blank: .120”(3.05mm) Clear Hole
RM53: M3 Threaded (panel side)
standoff with boarlock
RM54: 4-40UNC Threaded (panel side)
standoff with boardlock
Shell size and Configuration:
E5W1, A3W3, A7W2, A11W1, B5W5, B9W4, B13W3,
B17W2, B21W1, C8W8, C13W6, C17W5, C21WA4
C25W3, C27W2, D24W7, D36W4, D43W2
RM84: Non-Removable M3 screwlock,
with standoff and boardlock
For Right Angle
Gender:
P: Pin
RM6: Metal bracket with boardlocks
S: Socket
Contacts:
For straight
BLANK: Solder-cup signal contacts only
P3SY: 20-40 Amp power & signal mix
P2SY: 10-20 Amp power & signal mix
CSY: Coax & signal mix
Panel Mounting Options
For right angle & cable mount
Blank: .120”(3.05mm) Clear Hole
3F: M3 Front Screwlock
3R: M3 Rear Threaded Insert
4F: #4-40 Front Screwlock
4R: #4-40 Threaded Rear Insert
FM: Float mount system
A514: Blind Mate Guide Pin
SY: Signal only
P3Y: 20-40 Amp power only (3W3, 5W5, 8W8)
P2Y: 10-20 Amp power only (3W3, 5W5, 8W8)
CY: Coax only (3W3, 5W5, 8W8)
For right angle
MP3SV: US Footprint, 20-40 Amp power & signal mix
MP2SV: US Footprint, 10-20 Amp power & signal mix
MCSV: US Footprint, Coax & signal mix
MSV: US Footprint, Signal only
MP3V: US Footprint, 20-40 Amp power only (3W3, 5W5, 8W8)
MP2V: US Footprint, 10-20 Amp power only (3W3, 5W5, 8W8)
MCV: US Footprint, Coax only (3W3, 5W5, 8W8)
EP3SV: European Footprint, 20-40 Amp power & signal mix
EP2SV: European Footprint, 10-20 Amp power & signal mix
ESV: European Footprint, Signal only
EP3V: European Footprint, 20-40 Amp power only (3W3, 5W5, 8W8)
EP2V: European Footprint, 10-20 Amp power only (3W3, 5W5, 8W8)
HP3SV: Mixed Footprint, 20-40 Amp power & signal mix
HP2SV: Mixed Footprint, 10-20 Amp power & signal mix
HCSV: Mixed Footprint, Coax & signal mix
HSV: Mixed Footprint, Signal only
HP3V: Mixed Footprint, 20-40 Amp power only (3W3, 5W5, 8W8)
HP2V: Mixed Footprint, 10-20 Amp power only (3W3, 5W5, 8W8)
HCV: Mixed Footprint, Coax only (3W3, 5W5, 8W8)
11
SM2
D-Sub connectors - Stamped and Formed Contacts
SURFACE MOUNT CONNECTORS
Amphenol SMT D-Sub is offered in
right angle, receptacle with brackets,
as an industry standard for I / O
connections.
Specifications
• Connectors according to MIL C24308 - NFC 93425-HE5
Materials and Platings
Shells
Steel with tin plating
Boardlock features:
Insulator
High temperature (peak at 260°C) glass-filled
thermoplastic, UL 94V-0
-LIF (Low Insertion Force) boardlock
especially designed to be fully
compatible with pick and place
machine.
-ZeFo (Zero Force Insertion) boardlock
has been designed so that once placed
and expanded, secures a safe locking.
Socket contact Stamped and formed brass, selected gold in mating area;
2.54µm (100µ”) min. tin on termination area, with entire
contact under-plated 1.27µm (50µ”) min. nickel
Rear insert
Brass, 3µm up to 5µm (118µ” up to 197µ”) tinned over
nickel 2µm up to 3 µm (78µ” to 118µ”)
Boardlock
Tin plating 4µm up to 6µm (157µ” up to 236µ”) over nickel
2µm up to 3µm (78µ” up to 118µ”), insertion force:
Low Insertion Force = LIF (bronze)
Zero Insertion Force = ZeFo (bronze)
Designed for
Pick and Place
SMT process
Screwlock
Grounding
Brass, 6µm up to 10µm (236µ” up to 394µ”) tinned over
nickel 2µm up to 3µm (78µ” up to 118µ”)
Grounding strap: brass, 4µm up to 6µm tin plating over
nickel 2µm up to 3µm (78µ” up to 118µ”)
Electrical Data
Current rating
Voltage rating
3A
300V AC/rms 50Hz
Withstanding voltage
Insulation resistance
Contact resistance
1000V AC/rms 50Hz for one minute
5000MΩ
10mΩ max
• Industrial
• Telecom
Climatic Data
Operating temperature 85°C, peak at 105°C
• Any industry standard
Damp heat
56 days (40°C - 95% HR)
I / O connections
Mechanical Data
Single contact insertion force
Single contact withdrawal force
LIF boardlock
1.2N < F < 2.5N
0.4N min
8N max per connector
0.2mm (.008”) max
Coplanarity of contacts
Mating and unmating force
Unit: N
No. of Cts
Mate (max)
Unmate (min)
9 (size E)
15 (size A)
25 (size B)
30
50
83
3.5
4.5
8.0
Shell Size Dimensions
PCB LAYOUT
mm (inch)
D
SHELL
SIZE
A
B
0
C
PITCH
F
K
+0.05 (.002)
±0.1 (.004)
0
-0.1 (.004)
-0.2 (.008)
-0.25 (.01)
31.15 (1.226) 16.4 (.645)
25 (.984)
8.03 (.316) 2.74 (.1078) 10.97 (.432) 16.3 (.642)
24.6 (.968)
8.03 (.316) 2.76 (.1086) 33.12 (1.304) 38.3 (1.508)
E
A
B
39.4 (1.551) 24.8 (.976) 33.3 (1.311) 8.03 (.316) 2.74 (.1078) 19.2 (.756)
53.3 (2.098) 38.5 (1.515) 47 (1.850)
Panel mounting option
GROUNDING TABS:
BOARDLOCKS:
FLANGES ACCESSORIES:
How to order
L 17 SM2 ... S ... ... ... ...
RoHS Compliant
packaging:
R = reel (100 / reel, 9 Pos only)
T = tube
configuration:
09
15
25
contact plating:
1 = 0.2µm Au (7.9µ”)
2 = 0.4µm Au (15.7µ”)
3 = 0.5µm Au (19.7µ”)
4 = 0.8µm Au (31.5µ”)
6 = 1.27µm Au (50µ”)
board locks / grounding tab:
1 = V1 grounding tab +ZeFo
boardlocks (PCB = 1.6)
4 = ZeFo boardlocks only
(PCB = 1.6)
7 = V1 grounding tab only
8 = no grounding tab and no
boardlocks
mounting options:
1 = rear insert 4-40
2 = rear insert M3
5 = installed front screwlock
4-40
B = V2 grounding tab + LIF
boardlocks (PCB = 1.6)
6 = fixed front screwlock 4-40
: Standard options
For special request, please consult factory
Memo
Do not hesitate to contact us for further information
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
D-ST
Screw Termination D’Sub series
• Connectors according to: MIL C24308 - NFC 93425-HE5
Materials and platings
Shells
Steel, Tin plated
Insulator
Contacts
Glass filled thermoplastic, UL 94V-0
Machined brass for plug full gold
Machined bronze for socket, full gold
Electrical Data
Current rating
7,5 A max
Voltage rating
300 V RMS at 50 Hz
1000 V RMS at 50 Hz
> 5000 MΩ at 500 V DC
< 5 mΩ
Withstanding voltage
Insulation resistance
Contact resistance
Climatic Data
Simplify
Your cable
assemblies!
Operating temperature
Damp heat
Salt spray
- 55°C to + 85°C, peak at 125°C
21 days (40°C - 95% HR)
48 hours
Mechanical Data
Cable type
Cable gage
Solid or stranded
0.75 mm max ( AWG 18 ) - For
bigger wire, please consult factory
0.05 mN max
Screw torque
Mating cycles
100 (class II) or 500 (class I)
A
B
C
10°
+0.1
- 0.2
9,7
(.382”)
11,6 REF
(.457”)
D
E
13 REF
(.512”)
Ø1,45
(.057”)
Cable stripping
3 mm
(.118”)
A
B
0
C
D
E
+0,25 (,010”)
+0,2 (,008”) +0.1 (,004”) +0.1 (,004”)
SIZE
-0.25 (,010”) -0,2 (,008”)
0
-0.1 (,004”)
-0,4 (,016”)
30.7
(1.209”)
16.4
(.646”)
16.8
(.661”)
25
(.984”)
19.4
(.370”)
9
39
(1.535”)
24.8
(.976”)
25.1
(.988”)
33.3
(1.311”)
27.7
(1.091”)
15
25
37
52.9
(2.083”)
38.5
(1.516”)
38.8
(1.528”)
47
(1.850”)
41.4
(1.630”)
69.2
(2.724”)
54.9
(2.161”)
55.3
(2.177”)
63.5
(2.500”)
57.9
(2.280”)
How to order
RoHS Compliant
Plastic hoods
Metallic hoods
TF
D-Sub connectors - Stamped and Formed Contacts
PRESS FIT
STRAIGHT PCB TERMINATION
The Amphenol “TF“ series
features eye of needle formed
contacts, and insulator with
closed entry contacts cavities.
Materials and Platings
Shells
Insulator
Pin contact
Steel, tin plated
Glass-filled thermoplastic, UL 94V-0
Brass, selected gold in mating area;
2.54µm (100µ") min. tin
This series gives you
on termination area over
Amphenol's high standards of
quality and reliability to meet
all your technical requirements.
1.27µm (50µ") min.nickel
Socket contact
Phosphor bronze, selected gold in
mating area; 2.54µm (100µ") min.
tin on termination area over;
1.27µm(50µ") min. nickel
Rear insert
Boardlock
Screwlock
Brass, 2.54µm (100µ") min. nickel plated
Brass, 2.54µm (100µ") min. nickel plated
Brass, 2.54µm (100µ") min. nickel plated
Electrical Data
Solderless
straight PCB
mount
Current rating
Voltage rating
Withstanding voltage
Insulation resistance
Contact resistance
3A
300V AC
1000V AC/rms 60Hz for one minute
1000MΩ
25mΩ max
connectors
Climatic Data
Operating temperature -55°C to +125°C
Salt spray
24 hours
• Industrial
• Telecom
Mechanical Data
Single contact insertion force
Single contact withdrawal force
Single contact insertion on board
Single contact withdrawal from board
Standard plating thickness
≤ 3.60 N
≥ 0.2 N
≤ 100 N
≥ 20 N
Gold flash
0.4µm (15µ") gold
0.76µm (30µ") gold
• Any backplanes
connections
Terminal
Boardlock
Specification
Specification
Finished Hole
1 (+0.09 -0.06)
> 25 µm
3.1 +/- 0.05 mm
Min 25 µm
5-15 µm
Cu
Sn
< 15 µm
Socket version
A
B
C
2.77
Plug version
A
B
C
2.77
24.99
2.77
Position n1 for plug
Position n1 for socket
For PCB holes diameters, see on page 1 (finished holes)
DIMENSIONS mm (inch)
Nb OF
CONTACTS
A
B
C plug
C socket
16.33 (0.643)
24.66 (0.97)
38.38 (1.511)
54.84 (2.16)
9
30.81 (1.185)
39.14 (1.54)
53.04 (2.088)
69.32 (2.729)
24.99 (0.984)
33.32 (1.312)
47.04 (1.852)
63.50 (2.5)
16.92 (0.666)
25.50 (1.004)
28.96 (1.534)
55.42 (2.182)
15
25
37
Female
Size of connectors
Tooling PN
981 MC
9
15
25
37
982 MC
983 MC
984 MC
Male
Size of connectors
Tooling PN
985 MC
9
15
25
37
986 MC
987 MC
988 MC
Board mounting option
Option 0
Option 1
3.10mm (.122”)
Press Fit Boardlock
Flange mounting option
M3 / #4 - 40 UNC
Screwlock
M3 / #4 - 40 UNC
Threaded holes
Option 1 or 4
Option 2 or 5
How to order
L 17TF ... ... ... ... ... ...
RoHS Compliant
Flange mounting option :
1 = #4-40 threaded hole
2 = #4-40 threaded hole with
#4-40 UNC screwlock
installed
Series
4 = M3 threaded hole
5 = M3 threaded hole with
M3 scewlock installed
Number of contacts :
09-15-25-37
Contact type:
1 = pin
0 = socket
Board mounting option
0 = without boardlock
1 = with boardlock
Contact plating
0 = gold flash
1 = 0.4 µm (15µ”)
2 = 0.76 µm (30µ”)
Front shell plating
1 = tin over nickel
Do not hesitate to contact us for further information
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
SD
D'Sub connectors - Stamped and Formed Contacts
SOLDER-CUP TERMINATION
STANDARD and HIGH DENSITY
The Amphenol "SD" series features
precision formed contacts, and
insulator with closed entry contacts
cavities.
Specifications
• Connectors according to: MIL C24308 - NFC 93425-HE5
Materials and Platings
This series gives you Amphenol's
high standards of quality and reliability
to meet all of your commercial
requirements.
Shells
Insulator
Pin contacts
Steel, tin over nickel plating
Glass-filled thermoplastic, UL 94V-0
Brass, selected gold in mating area;
2.54µm (100µ") min. tin
on termination area over
1.27µm (50µ") min. nickel
Socket contact
Phosphor bronze, selected gold in
mating area; 2.54µm (100µ") min. tin-
on termination area over 1.27µm
(50µ") min. nickel
Rear insert
Screwlock
Brass, 2.54µm (100µ") min. nickel plated
Brass, 2.54µm (100µ") min. nickel plated
Economical
solder cup
connectors
Electrical Data
Current rating
Standard Density: 5A
High Density: 3A
250V AC/rms 50Hz
1000V AC/rms 50Hz for one minute
1000MΩ at 500V DC
20mΩ max
Voltage rating
Withstanding voltage
Insulation resistance
Contact resistance
Climatic Data
Operating temperature -55°C to +125°C
• Industrial
• Telecom
Salt spray
24 hours
• Any industry standard
I / O connections
Mechanical Data
Single contact insertion force
Single contact withdrawal force
0.54kg (1.19lb) max
SD : 0.06kg (0.13lb) min
HD : 0.02kg (0.044lb) min
Mating and unmating force
Unit: kg ( lb)
No. of Cts
SD HD
SD
HD
Mate (max) Unmate (min) Mate (max) Unmate (min)
9
15
26
44
3.05 (6.74)
5.09 (11.24)
8.44 (18.66)
0.36 (0.79)
0.46 (1.01)
0.81 (1.8)
1.1 (2.47)
1.6 (3.56)
3.81 (8.42)
5.95 (13.16)
9.26 (20.46)
13.48 (29.78)
15.82 (34.96)
0.52 (1.14)
1.05 (2.32)
1.37 (3.02)
1.76 (3.88)
2.02 (4.46)
15
25
37
50
62 12.51 (27.65)
78 14.65 (32.38)
Standard plating thickness
• gold flash
• 0.4µm (15µ") gold
• 0.76 µm (30µ") gold
Standard Density
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
E±0.05 (.002)
POSITION #1
10°
X
Ø3.05 (.120 dia)
SOCKET
PLUG
F±0.13 (.005)
10.72 (.422)
DIMENSIONS mm (inch)
Nb OF
CONTACTS
A
B
C
D
E
F
X
9
30.84 (1.21)
39.24 (1.54)
53.04 (2.09)
69.32 (2.73)
67 (2.64)
24.99 (.98)
16.92 (.67)
24.7 (.972)
38.96 (1.53)
55.42 (2.18)
52.86 (2.08)
16.24 (.64)
24.56 (.97)
38.38 (1.51)
54.76 (2.16)
52.34 (2.06)
11.09 (.44)
19.39 (.76)
33.24 (1.31)
49.86 (1.96)
44.32 (1.75)
19.28 (.76)
27.51 (1.08)
41.30 (1.63)
57.71 (2.27)
55.3 (2.18)
2.74
2.74
2.77
2.77
2.77
15
25
37
50
33.32 (1.31)
47.04 (1.85)
63.50 (2.50)
61.11 (2.41)
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
E±0.13 (.005)
POSITION #1
10°
X
Ø3.05 (.120 dia)
PLUG
SOCKET
F±0.38 (.015)
13.56 (.534)
High Density
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
POSITION #1
Ø3.05 (.120)
2.29±0.05 (.09±0.002)
10°
PLUG
SOCKET
E±0.13 (.005)
10.72 (.422)
DIMENSIONS mm (inch)
Nb OF
CONTACTS
A
B
C
D
E
15
26
44
62
78
30.84 (1.21)
24.99 (.98)
16.92 (.67)
16.24 (.64)
19.28 (.76)
39.24 (1.54) 33.32 (1.31)
24.7 (.972)
24.56 (.97)
27.51 (1.08)
53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 41.30 (1.63)
69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 57.71 (2.27)
67 (2.64)
61.11 (2.41) 52.86 (2.08) 52.34 (2.06)
55.3 (2.18)
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
45.79±0.13 (1.803±0.005)
POSITION #1
Ø3.05 (.120)
10°
2.41 (.95)
PLUG
SOCKET
E±0.38 (.015)
33.56 (.534)
78 CONTACTS
Panel mounting option
M3 or #4-40 screwlock
M3 or #4-40
5.8 (.228)
6.0 (.236)
Front Female Screwlock
VF / VFM
Threaded Rear Insert
H / G
How to order
L ... ... ... ... ... ... ...C309
RoHS Compliant
plating option:
valid only for
0.76µm (30µ")
77: tinned shell
for receptable
717: tinned shell
+ dimples
gold
flash
part numbers to be written
as follow:
77...................C309
or
for plug
717.................C309
177: tinned shell
for receptable
777: tinned shell
+ dimples
0.4µm
(15µ")
front mounting type:
no digit = standard rivet
3.05mm
VF = front screwlock 4-40
VFM = front screwlock M3
for plug
SD : standard density
HD : high density
contact type:
P = pin
S = socket
shell size: E, A, B, C, D
configuration:
SD : 9,15,25,37,50
HD : 15,26,44,62,78
rear mounting type:
H = rear insert 4-40
G = rear insert M3
For special request, please consult factory
Do not hesitate to contact us for further information
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
SD
D'Sub connectors - Stamped and Formed Contacts
STRAIGHT PCB TERMINATION
STANDARD and HIGH DENSITY
The Amphenol "SD"
series features precision
formed contacts, and
insulator with closed
entry contacts cavities.
This series gives you
Amphenol's high
standards of quality and
reliability to meet all of
your commercial
Specifications
• Connectors according to: MIL C24308 - NFC 93425-HE5
Materials and Platings
Shells
Insulator
Pin contacts
Steel, tin over nickel plating
Glass-filled thermoplastic, UL 94V- 0
Brass, selected gold in mating area;
2.54µm (100 µ") min.tin on
termination area over 1.27µm
(50µ") min.nickel
Socket contact
Phosphor bronze, selected gold in
mating area;2.54µ(100µ") min.tin
on termination area over 1.27µm
(50µ") min.nickel
requirements.
Rear insert
Boardlock
Screwlock
Brass, 2.54µm (100µ") min.nickel plated
Brass, 2.54µm (100µ") min.nickel plated
Brass, 2.54µm (100µ") min.nickel plated
(removable)
Economical
straight PCB
mount connectors
Electrical Data
Current rating
Standard Density:5A
High Density:3A
250V AC/ rms 50Hz
1000V AC/rms 50Hz for one minute
1000MΩ at 500V DC
20mΩ max
Voltage rating
Withstanding voltage
Insulation resistance
Contact resistance
Climatic Data
Operating temperature -55°C to +125°C
• Industrial
Salt spray
24 hours
• Telecom
Mechanical Data
• Any industry standard
I / O connections
Single contact insertion force
Single contact withdrawal force
0.54kg (1.19lb) max
SD : 0.06kg (0.13lb) min
HD : 0.02kg (0.044lb) min
Mating and unmating force
Unit: kg ( lb)
No. of Cts
SD HD
SD
HD
Mate (max) Unmate (min) Mate (max) Unmate (min)
9
15
26
44
3.05 (6.74)
5.09 (11.24)
8.44 (18.66)
0.36 (0.79)
0.46 (1.01)
0.81 (1.8)
1.1 (2.47)
1.6 (3.56)
3.81 (8.42)
5.95 (13.16)
9.26 (20.46)
13.48 (29.78)
15.82 (34.96)
0.52 (1.14)
1.05 (2.32)
1.37 (3.02)
1.76 (3.88)
2.02 (4.46)
15
25
37
50
62 12.51 (27.65)
78 14.65 (32.38)
Standard plating thickness
• gold flash
• 0.381µm (15µ") gold
• 0.76 µm (30µ") gold
Standard Density
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
E±0.05 (.002)
POSITION #1
12.55±0.38 (.494±0.015)
7.9±0.13 (.311±0.005)
4.4 (.173)
0.4 (.016)
ø 0.62 (.024)
10°
X
5.9 (.232)
DETAIL A
PLUG
F±0.13 (.005)
* see chart "panel mounting option"
SOCKET
6.1 (.240)
10.72 (.422)
A
DIMENSIONS mm (inch)
Nb OF
CONTACTS
A
B
C
D
E
F
X
9
30.84 (1.21)
39.24 (1.54)
53.04 (2.09)
69.32 (2.73)
67 (2.64)
24.99 (.98)
33.32 (1.31)
47.04 (1.85)
63.50 (2.50)
61.11 (2.41)
16.92 (.67)
24.7 (.972)
38.96 (1.53)
55.42 (2.18)
52.86 (2.08)
16.24 (.64)
24.56 (.97)
38.38 (1.51)
54.76 (2.16)
52.34 (2.06)
11.09 (.44)
19.39 (.76)
33.24 (1.31)
49.86 (1.96)
44.32 (1.75)
19.28 (.76)
2.74
2.74
2.77
2.77
2.77
15
25
37
50
27.51 (1.08)
41.30 (1.63)
57.71 (2.27)
55.3 (2.18)
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
E±0.13 (.005)
POSITION #1
10°
X
13.56 (.534)
5.9 (.232)
PLUG
SOCKET
6.1 (.240)
F±0.38 (.015)
50 CONTACTS
High Density
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
POSITION #1
10°
2.29±0.05 (.09±0.002)
PLUG
SOCKET
E±0.13 (.005)
* see chart "panel mounting option"
10.72 (.422)
DIMENSIONS mm (inch)
Nb OF
CONTACTS
A
B
C
D
E
15
26
44
62
78
30.84 (1.21)
39.24 (1.54)
53.04 (2.09)
69.32 (2.73)
67 (2.64)
24.99 (.98)
33.32 (1.31)
47.04 (1.85)
63.50 (2.50)
61.11 (2.41)
16.92 (.67)
24.7 (.972)
38.96 (1.53)
55.42 (2.18)
52.86 (2.08)
16.24 (.64)
19.28 (.76)
24.56 (.97)
27.51 (1.08)
38.38 (1.51) 41.30 (1.63)
54.76 (2.16) 57.71 (2.27)
52.34 (2.06)
55.3 (2.18)
A±0.38 (.015)
B±0.13 (.005)
45.79±0.13 (1.803±.005)
C±0.13 (.005)
D±0.13 (.005)
POSITION #1
10°
2.41 (.095)
PLUG
SOCKET
E±0.38 (.015)
13.56 (.534)
78 CONTACTS
Panel mounting option
M3 or # 4-40 screwlock
H = # 4-40
G = M3
M3 or # 4-40
H = # 4-40
G = M3
J
X
Y
X
Y
4.8 (.189)
5.9 (.232)
Front Female Screwlock
Threaded Rear Insert
RM5 Standoff Boardlock
RM8 Standoff Boardlock
RM5
RM8
RM5G
RM8G
X
Y
J
6.0(.236)
4.2(.165)
6.2(.244)
12.7(.500)
3.2(.126)
10.1(.397)
How to order
L ... ... ... ... ... ... OL2 ...C309
RoHS Compliant
plating option:
valid only for
0.76µm (30µ")
77: tinned shell
for receptable
717: tinned shell
+ dimples
part numbers to be written
as follow:
gold
flash
77...................C309
or
for plug
717.................C309
177: tinned shell
for receptable
777: tinned shell
+ dimples
grounding tabs:
no digit = standard rivet
3.05mm
RM5 = retention clip
RM8 = retention clip
+ front screwlock
0.4µm
(15µ")
for plug
SD : standard density
HD : high density
Termination
Straight for PCB
shell size: E, A, B, C, D
contact type:
P = pin
S = socket
mounting type:
H = rear insert 4-40
G = rear insert M3
H,G must also be used
to specify the threading
of RM5 or RM8
configuration:
SD : 9,15,25,37,50
HD : 15,26,44,62,78
grounding tabs.
For special request, please consult factory
Do not hesitate to contact us for further information
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
SD
D’Sub connectors - Stamped and Formed Contacts
RIGHT ANGLE
BOARD MOUNT CONNECTORS
The Amphenol “SD” series features
precision formed contacts and
boardlocks.
Specifications
• Connectors according to: MIL C24308 - NFC 93425-HE5
Materials and Platings
This series gives you Amphenol’s high
standards of quality and reliability to
meet all of your commercial
requirements.
Shells
Insulator
Pin contacts
Steel, tin over nickel plating
Glass-filled thermoplastic, UL 94V- 0
Brass, selected gold in mating area;
2.54µm (100 µ") min.tin on
termination area over 1.27µm
(50µ") min.nickel
Socket contact
Phosphor bronze, selected gold in
mating area;2.54µ(100µ") min.tin
on termination area over 1.27µm
(50µ") min.nickel
Rear insert
Boardlock
Brass, 2.54µm (100µ") min.nickel plated
Phosphor bronze or Brass, 2.54µm
(100µ") min.nickel plated
Economical
right angle PCB
mount
Screwlock
Brass, 2.54µm (100µ") min.nickel plated
Electrical Data
Current rating
Voltage rating
Withstanding voltage
Insulation resistance
Contact resistance
5A
250V AC/ rms 50Hz
1000V AC/rms 50Hz for one minute
1000MΩ at 500V DC
15mΩ max
connectors
Climatic Data
Operating temperature -55°C to +125°C
• Industrial
• Telecom
Salt spray
24 hours
• Any industry standard
I / O connections
Mechanical Data
Single contact insertion force
Single contact withdrawal force
0.54kg (1.19lb) max
0.06kg (0.13lb) min
Mating and unmating force
Unit: kg ( lb)
A4 Style
1A Style
No. of Cts
Mate (max) Unmate (min) Mate (max) Unmate (min)
9
3.05 (6.74)
5.09 (11.24)
8.44 (18.66)
12.51 (27.65)
0.36 (0.79)
0.46 (1.01)
0.81 (1.8)
1.1 (2.47)
4.6 (10.17)
7.7 (17.02)
12.7 (28.07)
17.7 (39.12)
0.4 (0.88)
0.5 (1.10)
0.8 (1.77)
1.2 (2.65)
15
25
37
Standard plating thickness
• gold flash
• 0.381µm (15µ") gold
• 0.76 µm (30µ") gold
A4 style (MIL Footprint)
Nb OF
DIMENSIONS mm (inch)
CONTACTS
A
B
C
D
E
F
9
30.84 (1.21)
24.99 (.98)
16.92 (.67)
16.24 (.64)
11.09 (.44)
2.74 (.108)
2.74 (.108)
2.77 (.109)
2.77 (.109)
15
25
37
39.14 (1.54) 33.32 (1.31)
25.25 (.99)
24.56 (.97)
19.39 (.76)
53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 33.24 (1.31)
69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 49.86 (1.96)
1A style (European Footprint)
Nb OF
DIMENSIONS mm (inch)
CONTACTS
A
B
C
D
E
F
9
30.84 (1.21)
24.99 (.98)
16.92 (.67)
16.24 (.64)
11.96 (.43)
2.74 (.108)
2.74 (.108)
2.77 (.109)
2.77 (.109)
15
25
37
39.1 (1.54)
33.32 (1.31)
25.25 (.99)
24.66 (.97)
19.18 (.755)
53.09 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 33.24 (1.31)
69.4 (2.73) 63.50 (2.50) 55.42 (2.18) 54.84 (2.16) 49.86 (1.96)
Panel mounting option
How to order
L
... SD ... ... ... ... CH ...C309
RoHS Compliant
plating option:
valid only for
0.76µm (30µ")
77: tinned shell
for receptable
717: tinned shell
+ dimples
part numbers to be written
as follow:
gold
flash
77 SD...................C309
or
for plug
717 SD.................C309
177: tinned shell
for receptable
777: tinned shell
+ dimples
mounting options:
0.4µm
(15µ")
4F = front screwlock 4-40
3F = front screwlock M3
4R = rear insert 4-40
3R = rear insert M3
for plug
shell size: E, A, B, C
PCB locking type:
grounding tabs
+ board locks
configuration: 9, 15, 25, 37
contact type:
P = pin
S = socket
Footprint:
1A (European)
A4 (MIL)
For special request, please consult factory
SD
D-Sub connectors - Stamped and Formed Contacts
RIGHT ANGLE
BOARD MOUNT CONNECTORS
FOOTPRINT 14.99 mm (.590”)
The Amphenol "SD" series features
precision formed contacts and
boardlocks.
Specifications
• UL File: E119881
• Connectors according to MIL C24308
This series gives you Amphenol's high
standards of quality and reliability to
meet all of your commercial
requirements.
Materials and Platings
Shells
Insulator
Pin contacts
Steel, tin over nickel plating
Glass-filled thermoplastic, UL 94V-0
Brass, selected gold in mating area;
2.54µm (100µ") min. tin
on termination area over
1.27µm (50µ") min. nickel
Socket contact
Phosphor bronze, selected gold in
mating area; 2.54µm (100µ") min. tin-
on termination area over 1.27µm
(50µ") min. nickel
Rear insert
Screwlock
Brass, 2.54µm (100µ") min. nickel plated
Brass, 2.54µm (100µ") min. nickel plated
Economical
right angle PCB
mount connectors
Electrical Data
Current rating
Voltage rating
Withstanding voltage
Insulation resistance
Contact resistance
5A
600V AC/rms 50Hz
1000V AC/rms 50Hz for one minute
5000MΩ
10mΩ max
Climatic Data
• Industrial
• Telecom
Operating temperature -55°C to +125°C
Salt Spray
24 hours
• Any industry standard
I / O connections
Mechanical Data
Mating and unmating force
Unit: kg ( lb)
No. of Cts
Mate (max)
Unmate (min)
9 (size E)
15 (size A)
25 (size B)
37 (size C)
3.05 (6.74)
5.09 (11.24)
8.44 (18.66)
12.51 (27.65)
0.36 (0.79)
0.46 (1.01)
0.81 (1.8)
1.1 (2.47)
Standard plating thickness
• gold flash
• 0.4µm (15µ") gold
• 0.76 µm (30µ") gold
Shi ell Size Dimensions
A±0.38 (.015)
B±0.13 (.005)
C±0.25 (.01)
D±0.25 (.01)
POSITION #1
0.64*0.64 (.025*.025)
10°
X
12.55 (.494)
3.18 (.125)
Recommended P.C.B.Layout
E±0.13 (.005)
E±0.13 (.005)
E±0.13 (.005)
1.385 (.054)
X
B±0.13 (.005)
DIMENSIONS mm (inch)
Nb OF
CONTACTS
A
B
C
D
E
X
9
30.84 (1.214) 24.99 (.984)
16.92 (.666)
16.26 (.640)
24.56 (.967)
11.08 (.436)
19.39 (.763)
2.74
2.74
2.77
2.77
15
25
37
39.24 (1.545) 33.32 (1.312) 25.25 (.994)
53.04 (2.088) 47.04 (1.852) 38.96 (1.534) 38.30 (1.508) 33.24 (1.309)
69.34 (2.730) 63.50 (2.500) 55.42 (2.182) 54.76 (2.156) 49.86 (1.963)
Panel mounting option
#4-40 or M3
#4-40 or M3
Front Female Screwlock
4F/3F
Threaded Rear Insert
4R/3R
How to order
L ... SD ... ... ... AB CH ...C309
RoHS Compliant
77: tinned shell
plating option:
valid only for
0.76µm (30µ")
for receptable
717: tinned shell
+ dimples
gold
flash
part numbers to be written
as follow:
for plug
77SD...................C309
or
717SD.................C309
177: tinned shell
for receptable
777: tinned shell
+ dimples
0.4µm
(15µ")
mounting options:
for plug
4F = front screwlock 4-40
3F = front screwlock M3
4R = rear insert 4-40
3R = rear insert M3
shell size: E, A, B, C
configuration: 09, 15, 25, 37
PCB locking type:
grounding tabs + boardlocks
contact type:
P = pin
S = socket
footprint:14.99 mm (.590”)
For special request, please consult factory
TS
D-Sub connectors - Stamped and Formed Contacts
STRAIGHT PCB TERMINATION
ONE METAL SHELL CONNECTORS
The one shell D-sub Amphenol series
features, stamped and formed contacts.
Specifications
• Connectors according to MIL C24308
This series gives you Amphenol’s high
standards of quality and reliability
to meet all of your commercial
requirements
Materials and Platings
Shells
Steel, tin over nickel plating
Glass-filled thermoplastic, UL 94V-0
Copper alloy, with selective gold plating
Brass with nickel plating
Insulator
Contacts
Boardlock
Screwlock
Brass with nickel plating
Electrical Data
Current rating
5A
Voltage rating
600V AC/rms 50Hz
1000V AC/rms 50Hz for one minute
5000MΩ
Economical
straight PCB,
one shell
Withstanding voltage
Insulation resistance
Contact resistance
10mΩ max
Climatic Data
connectors
Operating temperature -55°C to +125°C
Mechanical Data
Mating and unmating force
Unit: kg ( lb)
• Industrial
• Telecom
• Any industry standard
I / O connections
No. of Cts
Mate (max)
Unmate (min)
9
3.05 (6.74)
5.09 (11.24)
8.44 (18.66)
12.51 (27.65)
0.36 (0.79)
0.46 (1.01)
0.81 (1.8)
1.1 (2.47)
15
25
37
Standard plating thicknesses
• gold flash
• 0.4µm (15µ") gold
• 0.76 µm (30µ") gold
Shell Size Dimensions
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
POSITION #1
10°
X
4.8 (.189)
PLUG
SOCKET
7.7 (.303)
0.8 (.031)
*see chart "how to order"
RECOMMENDED P.C.B. LAYOUT
B
E
ø3.2 (.126)
C
L
ø1.0 (.039)
1.385 (.055)
X
DIMENSIONS mm (inch)
Nb OF
CONTACTS
A
B
C
D
E
X
9
30.84 (1.21)
39.24 (1.54)
53.04 (2.09)
69.34 (2.73)
24.99 (.984)
33.32 (1.31)
47.04 (1.85)
63.50 (2.50)
16.92 (.666)
25.25 (.994)
38.96 (1.53)
55.42 (2.18)
16.26 (.640)
24.56 (.967)
38.30 (1.51)
54.76 (2.16)
11.08 (.436)
19.39 (.763)
33.24 (1.31)
49.86 (1.96)
2.74
2.74
2.77
2.77
15
25
37
Panel mounting option
#4-40 or M3
#4-40 or M3
ø3.25 (.128)
ø3.25 (.128)
Boardlock with Threaded Insert
RM5
Boardlock with Front Screwlock
RM8
ø3.05 (120”)
Rear Insert
M3 or #4-40
Clear Hole
Rear Insert Threaded
How to order
L ... TS ... ... ... ... ... ... C309
RoHS Compliant
77: tinned shell
plating option:
valid only for
0.76µm (30µ")
for receptable
717: tinned shell
+ dimples
part numbers to be written
as follow:
gold
flash
77...................C309
or
for plug
717.................C309
177: tinned shell
for receptable
777: tinned shell
+ dimples
0.4µm
(15µ")
board mounting options:
Blank = Clear Hole
RM5 = retention clip
RM8 = retention clip
+front screwlock
for plug
shell size: E, A, B, C
mounting options:
Blank = Clear Hole
G = M3
termination:
OL2 : L = 6.02mm (.237”)
OL2C : L = 11.48mm (.452”)
H = 4.40
H,G must also be used to specify
the threading of RM5 or RM8
grounding tabs
contact type:
P = pin
S = socket
configuration: 09, 15, 25, 37
For special request, please consult factory
RR-HR
D-Sub connectors - Stamped and Formed Contacts
REAR RELEASE
CRIMP CONNECTORS
Designed for high volume
production, Amphenol's rear
release crimp connector and
contacts provide significant cost
saving.
Specifications
• Connectors according to MIL C24308
Materials and Platings
Shells
Tinned steel with or without dimples
on plug connector
- EMI / RFI shell configuration.
- Removable, reusable contacts.
- Automatic and manual tooling
available.
Insulator
Boardlock
Black glass-filled thermoplastic, UL 94V-0
Brass, 3µm to 5µm (118µ" to 197µ")
tin over nickel 2µm to 3µm
(78µ" to 118µ")
Screwlock
Brass, 6µm to 10µm (236µ" to 394µ")
tin over nickel 2µm to 3µm
(78µ" to 118µ")
Contacts
Under plating
2µm (78µ") nickel
2µm (78µ") nickel
2µm (78µ") nickel
Crimp side
0.2µm (8µ") gold
0.5µm (20µ") gold
0.76µm (30µ") gold
gold flash or tin
gold flash or tin
gold flash or tin
Simplify
your cable
assemblies
Electrical Data
Current rating
Voltage rating
5A
500V AC/rms 50Hz
Withstanding voltage
RR: 1000V AC/rms 50Hz for 1 minute
HR: 1000V AC/rms 60Hz for 1 minute
RR: 5000MΩ
Insulation resistance
HR: 1000MΩ
10mΩ max
20-28 AWG max insulation
Ø1.27mm (.05")
• Commercial
• Industrial
• Telecom
Contact resistance
Wire size
• Any industry standard
I / O connections
Climatic Data
Operating temperature -55°C to +125°C
Mechanical Data
Mating and unmating force
Unit: kg ( lb)
No. of Cts
Mate (max)
RR
Unmate (min)
RR HR
RR HR
HR
9 (size E) 15 (size E) 3.05 (6.74) 3.81 (8.42) 0.36 (0.79) 0.52 (1.14)
15 (size A) 26 (size A) 5.09 (11.24) 5.95 (13.16) 0.46 (1.01) 1.05 (2.32)
25 (size B) 44 (size B) 8.44 (18.66) 9.26 (20.46) 0.81 (1.8) 1.37 (3.02)
37 (size C) 62 (size C) 12.51 (27.65) 13.48 (29.78) 1.1 (2.47) 1.76 (3.88)
50 (size D) 78 (size D) 14.65 (32.38) 15.82 (34.96) 1.6 (3.56) 2.02 (4.46)
Standard density RR
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
E±0.05 (.002)
POSITION #1
10°
ø3.05 (.120)
X
PLUG
SOCKET
10.72 (.422)
numbered cavities
F±0.13 (.005)
DIMENSIONS mm (inch)
Nb OF
CONTACTS
A
B
C
D
E
F
X
9
30.84 (1.21) 24.99 (.98)
39.24 (1.54) 33.32 (1.31)
16.92 (.67)
24.7 (.972)
16.24 (.64)
24.56 (.97)
11.09 (.44) 19.28 (.76) 2.74
19.39 (.76) 27.51 (1.08) 2.74
15
25
37
50
53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 33.24 (1.31) 41.30 (1.63) 2.77
69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 49.86 (1.96) 57.71 (2.27) 2.77
67 (2.64)
61.11 (2.41) 52.86 (2.08) 52.34 (2.06) 44.32 (1.75) 55.3 (2.18) 2.77
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
E±0.13 (.005)
POSITION #1
ø3.05 (.120)
10°
X
PLUG
SOCKET
2
13.56 (.534)
numbered cavities
F±0.38 (.015)
High density HR
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
POSITION #1
10°
ø3.05 (.120)
2.29±0.05 (.09±0.002)
PLUG
SOCKET
10.72 (.422)
numbered cavities
E±0.13 (.005)
DIMENSIONS mm (inch)
Nb OF
CONTACTS
A
B
C
D
E
15
26
44
62
78
30.84 (1.21) 24.99 (.98)
39.24 (1.54) 33.32 (1.31)
16.92 (.67)
24.7 (.972)
16.24 (.64)
24.56 (.97)
19.28 (.76)
27.51 (1.08)
53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 41.30 (1.63)
69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 57.71 (2.27)
67 (2.64)
61.11 (2.41) 52.86 (2.08) 52.34 (2.06)
55.3 (2.18)
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
45.79±0.13 (1.80±.005)
POSITION #1
10°
ø3.05 (.120)
2.41 (.095)
PLUG
SOCKET
3
13.56 (.534)
numbered cavities
E±0.38 (.015)
Panel mounting option
Standard density:
M3 or #4-40
front screwlock
ø3.1 (.122")
Fixed front female screwlock
VF / VFM
Standard rivet ø 3.1mm
no digit
M3 or #4-40
Threaded rear insert
H / G
High density:
M3 or #4-40
ø3.05 (.120")
Standard rivet ø3.05mm
no digit
Threaded rear insert
H / G
M3 or #4-40
front screwlock
4
Fixed front female screwlock
VF / VFM
Contacts
Standard density:
9.9 (.390")
1.75 (.069")
4.7 (.185")
C
B
9.4 (.370")
1.75 (.069")
4.7 (.185")
A
B
C
AWG
20-24
24-28
1.8 (.071”)
1.4 (.055”)
1.9 (.075”)
1.5 (.059”)
2.5 (.098”)
1.7 (.066”)
High density:
7.7 (.303")
0.95 (.037")
6.15 (.242")
1.65 (.065")
1.3 (.051")
6.15 (.242")
7.3 (.287")
0.9 (.035")
5
How to order RR (standard density)
Housings
L ..... RR ..... ..... ..... ..... .....
RoHS Compliant
front mounting type:
VF = front screwlock 4-40
VFM = front screwlock M3
177: tinned shell for recept-
acle
777: tinned shell + dimples
for plug
contact type:
P = pin
S = socket
shell size: E,A,B,C,D
Rear mounting type:
H = rear insert 4-40
G = rear insert M3
no digit = standard rivet
ø3.1mm
configuration:
09,15,25,37,50
F = float mounting
Contacts
L 17 RR ..... ..... ..... .....
RoHS Compliant
wire size:
packaging:
D1: 20 to 24 AWG
D2: 24 to 28 AWG
100 = bulkpack unit (100 cts)
400 = reel of 400 cts
2K = reel of 2000 cts
10K = reel of 10000 cts
(right feed reel)
contact type:
M = male
F = female
10G = reel of 10000 cts
(left feed reel)
REEL WINDING DIRECTION
full gold plating:
01 = Flash Gold
02 = 0.4µ (15µ")
04 = 0.76µ (30µ")
selective gold plating:
11 = Flash Gold
+ 2µm (78µ") Sn
12 = 0.4µ (15µ")
+ 2µm (78µ") Sn
14 = 0.76µ (30µ")
+ 2µm (78µ") Sn
Left to right feed reel:G Right to left feed reel:K
6
For special request, please consult factory
How to order HR (high density)
Housings
L ..... HR ..... ..... ..... ..... .....
RoHS Compliant
front mounting type:
VF = front screwlock 4-40
VFM = front screwlock M3
177: tinned shell for recept-
acle
777: tinned shell + dimples
for plug
contact type:
P = pin
S = socket
shell size: E,A,B,C,D
Rear mounting type:
H = rear insert 4-40
G = rear insert M3
no digit = standard rivet
ø3.05mm
configuration:
15,26,44,62,78
Contacts
L 17 HR D2 ..... ..... .....
RoHS Compliant
wire size:
packaging:
24 to 28 AWG
5K = reel of 5000 cts
(right feed reel)
5G = reel of 5000 cts
(left feed reel)
10K = reel of 10000 cts
(right feed reel)
10G = reel of 10000 cts
(left feed reel)
contact type:
M = male
F = female
full gold plating:
01 = Flash Gold
02 = 0.4µ (15µ")
04 = 0.76µ (30µ")
selective gold plating:
11 = Flash Gold
+ 2µm (78µ") Sn
12 = 0.4µ (15µ")
+ 2µm (78µ") Sn
14 = 0.76µ (30µ")
+ 2µm (78µ") Sn
REEL WINDING DIRECTION
Left to right feed reel:G Right to left feed reel:K
7
For special request, please consult factory
Tooling for crimp contacts
For standard density crimp contacts: 17RR series
• contact insertion and removal tool
• hand crimp tool for single contacts AWG 20 to 28
• hand crimp tool for reels of 400 contacts
crimp dies: AWG 20 to 24
17D 438 SP
17D 440 SP
FA 0000 762
FA 0000 104
FA 0000 102
FE 0400
crimp dies: AWG 24 to 28
• stripping box
• automatic crimp machine for reels of 2000 to 10000 contacts 970 MC
crimp dies: AWG 20 to 24
crimp dies: AWG 24 to 28
968 MC
972 MC
For high density crimp contacts: 17HR series
• automatic crimp machine for reels of 2000 to 10000 contacts 970 MC
crimp dies: AWG 24 to 28
973 MC
Do not hesitate to contact us for further information
8
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
DFR
D-Sub connectors - Stamped and Formed Contacts
FLAT RIBBON
D-SUB CONNECTORS
These connectors are suitable for
compact requirement of modern
peripheral equipment.
Specifications
• Connectors according to MIL C24308
Special contact design allows usage
of standard 1.27mm (.05") flat cable.
Suitable with all standard D-Sub hoods.
Materials and Platings
Shells
Insulator
Pin contacts
Steel with nickel plating
Glass-filled thermoplastic, UL 94V-0
Brass, selected gold in mating area;
2.54µm (100µ") min. tin
on termination area over
1.27µm (50µ") min. nickel
Socket contact
Phosphor bronze, selected gold in
mating area; 2.54µm (100µ") min. tin
on termination area over 1.27µm
(50µ") min. nickel
Rear insert
Screwlock
Brass, 2.54µm (100µ") min. nickel plated
Brass, 2.54µm (100µ") min. nickel plated
Electrical Data
Current rating
5A
Voltage rating
250V AC/rms 60Hz
1000V AC/rms 60Hz for one minute
1000MΩ
Withstanding voltage
Insulation resistance
Contact resistance
20mΩ max
Climatic Data
• Industrial
• Telecom
Operating temperature -40°C to +125°C
• Any industry standard
I / O connections
Mechanical Data
Single contact insertion force
Single contact withdrawal force
Mating and unmating force
Unit: kg ( lb)
0.54kg (1.19lb) max
0.06kg (0.13lb) min
No. of Cts
Mate (max)
3.05 (6.74)
5.09 (11.24)
8.44 (18.66)
12.51 (27.65)
Unmate (min)
9 (size E)
15 (size A)
25 (size B)
37 (size C)
0.36 (0.79)
0.46 (1.01)
0.81 (1.8)
1.1 (2.47)
Standard plating thicknesses
• gold flash
• 0.4µm (15µ") gold
• 0.76 µm (30µ") gold
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
E±0.05 (.002)
POSITION #1
10°
X
DIMENSIONS mm (inch)
Nb OF
CONTACTS
A
B
C
D
E
X
9
30.84 (1.21)
39.24 (1.54)
53.04 (2.09)
69.32 (2.73)
24.99 (.984)
33.32 (1.31)
47.04 (1.85)
63.50 (2.50)
16.92 (.666)
24.70 (.972)
38.96 (1.53)
55.42 (2.18)
16.24 (.639)
24.56 (.967)
38.38 (1.51)
54.76 (2.16)
11.09 (.437)
19.39 (.763)
33.24 (1.31)
49.86 (1.96)
2.74
2.74
2.77
2.77
15
25
37
STRAIN RELIEF
Panel mounting option
M3 or #4-40
ø3.05 (.120")
Standard rivet ø 3.05mm
no digit
Threaded rear insert
B / D
M3 or #4-40 screwlock
Front female screwlock
A / C
Tool
Support for hand termination tool:
974MC
How to order
L ... ... FR ... ... ... ... C309
RoHS Compliant
Plating option:
valid only for
0.76µm (30µ")
flash
gold
17D: tinned shell
for plug and
receptacle
part number must be written
as follow:
L 17D……………C309
or
L 117D…………..C309
0.4µm
(15µ”)
117D: tinned shell
for plug and
receptacle
contact type:
P = pin
shell size: E,A,B,C
S = socket
Flat ribbon cable type
configuration:
09, 15, 25, 37
mounting options:
no digit = standard rivet ø 3.05mm
A = front screwlock M3
C = front screwlock 4-40
B = rear insert M3
type:
A = front metal shell
B = all plastic
D = rear insert 4-40
: Standard options
For special request, please consult factory
Do not hesitate to contact us for further information
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
17H
D-Sub connectors - Stamped and Formed Contacts
DUAL PORT
D-SUB CONNECTORS
Amphenol's G17H dual port
Specifications
• Connectors according to MIL C24308
connectors are a state of the art
design. The front metal shell helps
reduce EMI / RFI emissions.
Materials and platings
Designed to save PC board space,
Amphenol ’s dual port provides two
I / O connectors in a minimal amount
of board space.
Shells
Insulator
Pin contacts
Steel, tin plated
Glass-filled thermoplastic, UL 94V-0
Brass, selected gold in mating area;
2.54µm (100µ") min. tin on termination
area over 1.27µm (50µ") min. nickel
Phosphor bronze, selected gold in
mating area; 2.54µm (100µ") min. tin
on termination area over 1.27µm
(50µ") min. nickel
Socket contact
Rear insert
Boardlock
Brass, 2.54µm (100µ") min. nickel plated
Phosphor bronze, 2.54µm (100µ") min. tin
plated
Economical
dual port
connectors
Screwlock
Brass, 2.54µm (100µ") min. nickel plated
Electrical Data
Current rating
Voltage rating
Withstanding voltage
Insulation resistance
Contact resistance
3A
250V AC/rms 60Hz
1000V AC/rms 60Hz for one minute
1000MΩ
20mΩ max
Climatic Data
• Industrial
• Telecom
Operating temperature -55°C to +125°C
Salt spray 24 hours
• Any industry standard
I / O connections
Mechanical Data
Single contact insertion force
Single contact withdrawal force
Mating and unmating force
Unit: kg ( lb)
0.54kg (1.19lb) max
0.06kg (0.13lb) min
No. of Cts
Mate (max)
3.05 (6.74)
5.09 (11.24)
8.44 (18.66)
3.81 (8.42)
Unmate (min)
9
15
25
0.36 (0.79)
0.46 (1.01)
0.81 (1.8)
0.52 (1.14)
15 (Hi-den)
Standard plating thicknesses
• gold flash
• 0.4µm (15µ") gold
• 0.76 µm (30µ") gold
Shell size dimensions- standard and high density
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
E±0.05 (.002)
H***
3.81 (.150)
2.84 (.112)
POSITION #1
2.84 (.112)
* spacing between ports (see "how to order" for dimensions)
** profile distance (see "how to order" for dimensions)
*** Footprint options (see "how to order" for dimensions)
H*** Standard Density (SD)
High Density (HD)
SD / SD = 8.08mm (.318")
SD / HD = 5.08mm (.200")
= 8.89mm (.350")
HD / HD = 8.89mm (.350")
X
10°
= 5.08mm (.200")
Recommended P.C.B. Layout
ø3.05 (.120)
B±0.13 (.005)
E±0.05 (.002)
X
ø1.02 (.040)
only for quad boardlock
DIMENSIONS mm (inch)
Shell
Size
Nb OF
CONTACTS
A
B
C PLUG
D SOCKET
E
E
A
B
E
C
9/HD 15
15/HD 26
25
30.84 (1.21) 24.99 (.984) 16.92 (.666) 16.24 (.639) 11.09 (.437)
39.24 (1.54) 33.32 (1.31) 24.7 (.972) 24.56 (.967) 19.39 (.763)
53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 33.24 (1.31)
15 (Hi-den) 30.84 (1.21) 24.99 (.984) 16.92 (.666) 16.24 (.639) 10.31 (.406)
37 69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 49.86 (1.96)
Panel mounting option
Flange mounting options:
#4-40
front screwlock
M3 or #4-40
5.8 (.228")
Threaded rear insert
Fixed front female screwlock
0 / 4
7
M3 or #4-40
removable screwlock
4.8 (.189")
Removable female screwlock
1 / 5
Board mounting options:
#4-40
boardlock
boardlocks
Threaded hole
Dual arrowhead boardlock
Quad arrowhead boardlock
1
2
3
Dual Port Connectors
X X X X X X X X
L17H
Spacing Between Ports
Footprint Options
1 - F = 15.88mm (.625")
G= 28.42mm (1.12")
2 - F = 19.05mm (.750")
G= 31.60mm (1.24")
3 - F = 22.86mm (.900")
G= 35.41mm (1.39")
4 - SCSI
G= 12.80mm (.504")
7 - F = 20.70mm (.815")
G= 32.20mm (1.26")
SD / SD
BLANK = 8.08mm (.318")
SD / HD
BLANK = 5.08mm (.200")
889
HD / HD
BLANK = 8.89mm (.350")
508 = 5.08mm (.200")
= 8.89mm (.350")
Flange Mounting Options
0 = 4-40unc Rear Insert
Top Connector
1 = 4-40unc Removable Screwlock
3 = 3.05mm (.120”) Clear Hole
4 = M3 Rear Insert
1 = 9 Pos. Male
2 = 9 Pos. Female
3 = 15 Pos. Male
4 = 15 Pos. Female
5 = M3 Removable Screwlock
7 = 4-40unc Fixed Front Screwlock
5 = 25 Pos. Male
6 = 25 Pos. Female
Board Mounting Options
7 = 15 Pos. High Density Female
8 = 50 Pos. Female SCSI
9 = 26 Pos. High Density Female
J = 15 Pos. High Density Male
D = 37 Pos. Male
1 = 4 * Threaded 4-40unc Inserts
2 = Dual Arrowhead Boardlocks
3 = Quad Arrowhead Boardlocks
4 = 3.18mm (.125") Clear Hole
E = 37 Pos. Female
F = 44 Pos. High Density Male
G = 44 Pos. High Density Female
M = 62 Pos. High Density Male
N = 62 Pos. High Density Female
P = 78 Pos. High Density Male
Q = 78 Pos. High Density Female
Shell Plating
1 = Bright Tin / Nickel
2 = Nickel
Contact Plating
0 = Flash Gold
Bottom Connector
1 = 0.4µm (15µ") Gold
2 = 0.76µm (30µ") Gold
3 = Full Flash Gold
4 = 1.27µ” (50µ") Gold
1 = 9 Pos. Male
2 = 9 Pos. Female
3 = 15 Pos. Male
4 = 15 Pos. Female
5 = 25 Pos. Male
6 = 25 Pos. Female
7 = 15 Pos. High Density Female
8 = 50 Pos. Female SCSI
9 = 26 Pos. High Density Female
K = 15 Pos. High Density Male
D = 37 Pos. Male
E = 37 Pos. Female
F = 44 Pos. High Density Male
G = 44 Pos. High Density Female
M = 62 Pos. High Density Male
N = 62 Pos. High Density Female
P = 78 Pos. High Density Male
Q = 78 Pos. High Density Female
R = 9 Pos. Male + 9 Pos. Male
S = 9 Pos. Female + 9 Pos. Female
For special request, please consult factory
Do not hesitate to contact us for further information
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
HT
D-Sub connectors - Stamped and Formed Contacts
RIGHT ANGLE
HIGH TEMPERATURE AND
HIGH DENSITY CONNECTORS
The Amphenol "HT" series allows the
customers to use through hole
connectors with reflow soldering
process.
Specifications
• Connectors according to MIL C24308
Materials and Platings
This series gives you Amphenol’s
high standards of quality and
reliability to meet of your
Shell
Insulator
Steel, tin over nickel plating
Glass filled thermoplastic, UL 94V-0
Copper alloy, selective gold plating
Brass with nickel plating
Contacts
Rear insert
Screwlock
Grounding clip
commercial requirements
Brass with nickel plating
Copper alloy with tin plating
Electrical Data
Current rating
3A
Voltage rating
300V AC/rms 50Hz
1000V AC/rms 50Hz for one minute
5000MΩ
Withstanding voltage
Insulation resistance
Contact resistance
Economical
right angle PCB,
high temperature
connectors
10mΩ max
Climatic Data
Operating temperature
-55°C to +150°C, resist to short term (30s)
at 260°C
Mechanical Data
Mating and unmating force
Unit: kg ( lb)
• Industrial
• Telecom
No. of Cts
Mate (max)
Unmate (min)
• Any industry standard
I / O connections
15
26
44
62
3.81 (8.42)
5.95 (13.16)
9.26 (20.46)
13.48 (29.78)
0.52 (1.14)
1.05 (2.32)
1.37 (3.02)
1.76 (3.88)
Standard plating thicknesses
• gold flash
• 0.4 µm (15µ") gold
• 0.76 µm (30µ") gold
Shell size dimensions
A
B
C
POSITION #1
D
10˚
3.18 (.125)
Nb OF
Dimensions mm (inch)
CONTACTS
A
B
C
D
15
26
44
62
30.84 (1.214) 24.99 (.984)
16.26 (.640)
2.29 (.090)
2.29 (.090)
2.29 (.090)
2.41 (.095)
39.24 (1.545) 33.32 (1.312) 24.56 (.967)
53.04 (2.088) 47.04 (1.852) 38.30 (1.508)
69.34 (2.730) 63.50 (2.500) 54.76 (2.156)
P.C.B. Layout
B
B
5.47 (.215)
3.69 (.145)
0.25 (.010)
24.71 (.973)
0.59 (.023)
23.54 (.927)
D
Ø3.05 (.120)
Ø1.19(.047)
Ø3.05 (.120)
Ø1.19 (.047)
0.89
0.63(.025)
(.035)
22.3(.878)
23.5(.925)
24.75(.974)
4.83 (.190)
4.33 (.171)
15 PIN
62 PIN
B
B
9.65 (.380)
0.51 (.020)
8.63 (.340)
16.51 (.380)
0.51 (.020)
15.49 (.610)
D
D
Ø3.05 (.120)
Ø1.19 (.047)
Ø3.05 (.120)
Ø1.19 (.047)
0.64 (.025)
9.78 (.385)
0.64 (.025)
16.64 (.655)
14.23 (.560)
15.36 (.605)
7.37 (.290)
8.5 (.335)
26 PIN
44 PIN
Panel mounting option
# 4-40 or M3
# 4-40 or M3
Front female screwlock
4F/3F
Threaded rear insert
4F/3F
How to order
L 17 HT H ... ... ... ... ... ...
RoHS Compliant
high density
options:
O = open back side
no digit = closed back side
shell size:
E (15 ways)
A (26 ways)
B (44 ways)
C (62 ways)
packaging:
C = plastic tray
contact plating:
1 = gold flash
2 = 0.4µm (15µ")
4 = 0.76µm (30µ")
contact type:
P = Pin
S = Socket
mounting options:
4F = front screwlock 4-40
4R = rear insert 4-40
3F = front screwlock M3
3R = rear insert M3
For special request, please consult factory
Do not hesitate to contact us for further information
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
HT
D-Sub connectors - Stamped and Formed Contacts
STRAIGHT PCB TERMINATION
HIGH TEMPERATURE
CONNECTORS
The Amphenol "HT" series allows
the customers to use through hole
connectors with reflow soldering
process.
Specifications
• Connectors according to MIL C24308
Materials and Platings
This series gives you Amphenol’s
high standards of quality and
reliability to meet all of your
commercial requirements
Shell
Steel, tin over nickel plating
Glass-filled thermoplastic, UL 94V-0
Copper alloy, selective gold plating
Brass with nickel plating
Insulator
Contacts
Boardlock
Screwlock
Brass with nickel plating
Electrical Data
Current rating
5A
Voltage rating
600V AC/rms 50Hz
1000V AC/rms 50Hz for one minute
5000MΩ
Withstanding voltage
Insulation resistance
Contact resistance
Economical
straight PCB,
high temperature
connectors
10mΩ max
Climatic Data
Operating temperature
-55°C to +150°C, resist to short term (30s)
at 260°C
Mechanical Data
Mating and unmating force
Unit: kg ( lb)
• Industrial
• Telecom
No. of Cts
Mate (max)
Unmate (min)
• Any industry standard
I / O connections
9
3.05 (6.74)
5.09 (11.24)
8.44 (18.66)
12.51 (27.65)
0.36 (0.79)
0.46 (1.01)
0.81 (1.8)
1.1 (2.47)
15
25
37
Standard plating thicknesses
• gold flash
• 0.76 µm (30µ") gold
Shell size dimensions
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
POSITION #1
10°
X
4.8 (.189)
PLUG
SOCKET
7.7 (.303)
0.8 (.031)
*see chart "how to order"
Recommended P.C.B.Layout
B
E
ø3.2 (.126)
C
L
1.385 (.055)
X
ø1.0 (.039)
2.84 (.112)
DIMENSIONS mm (inch)
Nb OF
CONTACTS
A
B
C
D
E
X
9
30.84 (1.21)
39.24 (1.54)
53.04 (2.09)
69.34 (2.73)
24.99 (.984)
33.32 (1.31)
47.04 (1.85)
63.50 (2.50)
16.92 (.666) 16.26 (.640)
25.25 (.994) 24.56 (.967)
38.96 (1.53) 38.38 (1.51)
55.42 (2.18) 54.76 (2.16)
11.08 (.436)
19.39 (.763)
33.24 (1.31)
49.86 (1.96)
2.74
2.74
2.77
2.77
15
25
37
Panel mounting option
#4-40 or M3
#4-40 or M3
ø3.25 (.128)
ø3.25 (.128)
Standoff boardlock
RM5
Standoff boardlock
RM8
How to order
L 17 HT N ... ... ... ... ... ... ...
RoHS Compliant
standard density
packaging:
C = plastic tray
T = plastic tubes
shell size:
E (9 ways)
A (15 ways)
B (25 ways)
C (37 ways)
contact plating:
1 = gold flash
2 = 0.4µm (15µ")
4 = 0.76µm (30µ")
mounting options:
G = M3
H = 4-40
H,G must also be used
to specify the threading
of RM5 or RM8
grounding tabs.
grounding tabs:
RM5 = retention clip
RM8 = retention clip
+front screwlock
contact type:
P = pin
S = socket
termination:
OL2: L = 6.02mm (.237")
OL2C: L = 11.48mm (.452")
OL2E: L = 11.95mm (.470")
For special request, please consult factory
HT
D-Sub connectors - Stamped and Formed Contacts
RIGHT ANGLE
HIGH TEMPERATURE CONNECTORS
FOOTPRINT 14.99mm (.590")
The Amphenol "HT" series allows
the customers to use through hole
connectors with reflow soldering
process.
Specifications
• Connectors according to MIL C24308
Materials and Platings
This series gives you Amphenol’s
high standards of quality and
reliability to meet all of your
commercial requirements
Shells
Insulator
Contacts
Steel, tin over nickel plating
Glass-filled thermoplastic, UL 94V-0
Copper alloy, selective gold plating
Brass with nickel plating
Rear insert
Screwlock
Grounding clip
Brass with nickel plating
Copper alloy with tin plating
Electrical Data
Current rating
5A
Voltage rating
600V AC/rms 50Hz
1000V AC/rms 50Hz for one minute
5000MΩ
Withstanding voltage
Insulation resistance
Contact resistance
Economical
right angle PCB,
high temperature
connectors
10mΩ max
Climatic Data
Operating temperature
-55°C to +150°C, resist to short term (30s)
at 260°C
Mechanical Data
Mating and unmating force
Unit: kg ( lb)
• Industrial
• Telecom
No. of Cts
Mate (max)
Unmate (min)
• Any industry standard
I / O connections
9
3.05 (6.74)
5.09 (11.24)
8.44 (18.66)
12.51 (27.65)
0.36 (0.79)
0.46 (1.01)
0.81 (1.8)
1.1 (2.47)
15
25
37
Standard plating thicknesses
• gold flash
• 0.4 µm (15µ") gold
• 0.76 µm (30µ") gold
Shell size dimensions
A±0.38 (.015)
B±0.13 (.005)
C±0.25 (.01)
D±0.25 (.01)
POSITION #1
0.64*0.64 (.025*.025)
10°
X
12.55 (.494)
3.18 (.125)
Recommended P.C.B.Layout
E±0.13 (.005)
ø1.19 (.047)
C
L
2*ø3.20 (.126)
1.385 (.054)
X
B±0.13 (.005)
DIMENSIONS mm (inch)
Nb OF
CONTACTS
A
B
C
D
E
X
9
30.84 (1.214) 24.99 (.984)
16.92 (.666) 16.26 (.640)
11.08 (.436)
19.39 (.763)
2.74
2.74
2.77
2.77
15
25
37
39.24 (1.545) 33.32 (1.312) 25.25 (.994) 24.56 (.967)
53.04 (2.088) 47.04 (1.852) 38.96 (1.534) 38.30 (1.508) 33.24 (1.309)
69.34 (2.730) 63.50 (2.500) 55.42 (2.182) 54.76 (2.156) 49.86 (1.963)
Panel mounting option
#4-40 or M3
#4-40 or M3
Front female screwlock
4F/3F
Threaded rear insert
4R/3R
How to order
17 HT
N ... ... AB ... ... ... ...
options:
O = open back
standard density
no digit = closed back
shell size:
E (9 ways)
A (15 ways)
B (25 ways)
C (37 ways)
packaging:
C = plastic tray
T = plastic tubes
contact plating:
1 = gold flash
2 = 0.38µm (15µ")
4 = 0.76µm (30µ")
contact type:
P = pin
S = socket
mounting options:
footprint:14.99mm ( .590")
4R = rear insert 4-40
3R = rear insert M3
4F = front screwlock 4-40
3F = front screwlock M3
For special request, please consult factory
HTN
D-Sub connectors - Stamped and Formed Contacts
RIGHT ANGLE
HIGH TEMPERATURE
CONNECTORS
The Amphenol HTN series allows the
use of a through hole connector with
reflow soldering process.
Specifications
• Connectors according to MIL C24308
This series gives you Amphenol’s
high standard of quality and
reliability, to meet all of your
commercial requirements.
Materials and Platings
Shell
Steel, tin over nickel plating
Insulator
Glass-filled thermoplastic, UL 94V-0
Copper alloy, selective gold plating
Brass, tin over nickel plating
Brass, tin over nickel plating
Copper alloy with tin plating
Contacts
Rear insert
Screwlock
Grounding clip
Electrical Data
Current rating
Voltage rating
Withstanding voltage
Insulation resistance
Contact resistance
5A
Economical
right angle PDB,
hight temperature
connectors
600V AC/rms 50Hz
1000V AC/rms 50Hz for one minute
5000MΩ
10mΩ max
Climatic Data
Operating temperature
-55°C to +150°C, resist to short term soldering
at 260°C for 20sec.
Mechanical Data
Mating and unmating force
Unit: kg ( lb)
• Industrial
• Telecom
No. of Cts
Mate (max)
Unmate (min)
• Any industry standard
I / O connections
9
3.05 (6.74)
5.09 (11.24)
8.44 (18.66)
12.51 (27.65)
0.36 (0.79)
0.46 (1.01)
0.81 (1.8)
1.1 (2.47)
15
25
37
Standard plating thicknesses
• Gold flash
• 0.4 µm (15µ") Gold
• 0.76 µm (30µ") Gold
Shell size dimensions
A±0.38 (.015)
B±0.13 (.005)
C±0.13 (.005)
D±0.13 (.005)
10°
E±0.05 (.002)
POSITION #1 POSITION #1
F±0.1 (.004 )
6.3 (.248)
PLUG
SOCKET
3.2 (.126)
DIMENSIONS mm (inch)
Nb OF
CONTACTS
A
B
C
D
E
F
9
30.81 (1.21)
39.14 (1.54)
53.04 (2.09)
69.32 (2.73)
24.99 (.98)
33.32 (1.31)
47.04 (1.85)
63.50 (2.50)
16.92 (.67)
16.24 (.64)
11.09 (.44)
19.39 (.76)
33.24 (1.31)
49.86 (1.96)
2.74 (.108)
2.74 (.108)
2.77 (.109)
2.77 (.109)
15
25
37
25.25 (.99)
24.56 (.97)
38.96 (1.53) 38.38 (1.51)
55.42 (2.18) 54.76 (2.16)
Recommended P.C.B.Layout
B±0.05 (.002)
E±0.05 (.002)
F±0.1 (.004)
POSITION #1
ø1 (.039)
2*ø3.2 (.126)
Panel mounting option
#4-40 or M3
#4-40 or M3
Front female screwlock
4F/3F
Threaded rear insert
4R/3R
How to order
L17 HT
N
... ... ... ... ... ...
RoHS Compliant
Options:
O = Open back side
Standard density
no digit = Closed back side
Shell size:
E = 9 ways
A = 15 ways
B = 25 ways
C = 37 ways
Packaging:
C = Carton boxes
T = Plastic tubes
Contact plating:
1 = Gold flash
2 = 0.4µm (15µ")
4 = 0.76µm (30µ")
Contact type:
P = Plug
S = Socket
Mounting plating:
4R = Rear insert 4-40
3R = Rear insert M3
4F = Front screwlock 4-40
3F = Front screwlock M3
For special request, please consult factory
D-DF
D-Sub connectors - Screw-machined Contacts
FIXED MACHINED
CONTACT CONNECTOR
Amphenol’s 17D and 17DF series
fixed contact D-Subminiature
connector is suitable for industrial
or telecom use.
Specifications
• Connectors according to MIL C24308 - NFC93425-HE5
Materials and Platings
Shells
Steel tinned with dimples on plug connector
The machined contact provide
stability and reliability.
Insulator
Rear insert
Glass-filled thermoplastic, UL 94V-0
Brass, 3µm up to 5µm (118µ"up to 197µ")
tinned over nickel 2µm up to 3µm
(78µ" up to 118µ")
This series offers the broadest range
of termination options in the
Amphenol line.
Boardlock
Screwlock
Contacts
Tin plating 4µm up to 6µm
(157µ” up to 236µ”) over nickel 2µm up to 3µm
(78µ” up to 118µ”)
Brass, 6µm up to 10µm (236µ" up to 394µ")
tinned over nickel 2µm up to 3µm
(78µ" up to 118µ")
D: brass
Connectors
for industrial
and
DF: pin = brass
socket = copper alloy
Right angle version: full gold plating over 2µm to
3µm nickel
Straight version: full gold plating over 2µm up to
3µm (78µ” up to 118µ”) nickel
Electrical Data
telecom use
Current rating
7.5A
Voltage rating
300V AC/rms 50Hz
1000V AC/rms 50Hz for one minute
5000MΩ
Withstanding voltage
Insulation resistance
Contact resistance
• Medical
• Industrial
• Telecom
D: 8.5mΩ max
DF: 5mΩ max
• Any industry standard
I / O connections
Climatic Data
Operating temperature D / DF: -55°C to + 125°C
Salt spray
Humidity
48 hours
D: 21 days (40˚C - 95% HR)
DF: 56 days (40˚C - 95% HR)
Mechanical Data
Mating and unmating force
Unit: kg ( lb)
No. of Cts
Mate (max)
Unmate (min)
9 (size E)
15 (size A)
25 (size B)
37 (size C)
50 (size D)
3.05 (6.74)
5.09 (11.24)
8.44 (18.66)
12.51 (27.65)
14.65 (32.38)
0.36 (0.79)
0.46 (1.01)
0.81 (1.8)
1.1 (2.47)
1.6 (3.56)
Shell size dimensions
A
F
1.50
B
0.90
H
B’
G
ø3.10
C
Contact
P: Pin
S: Socket
A
B
B‘
C
D
D‘
E
F
F‘
G
G‘
H
J
0/-0.50
Shell
size
±0.25
(±.010)
0/-0.20
+0.20/0
±0.10
(±.004)
0/-0.25
+0.25/0
±0.20
+0.05/-0.20 +0.10/-0.20 +0.10/-0.20
±0.10
+0.10/-0.40
(0/-.008) (+.008/0)
(0/-.010) (+.010/0)
(±.008) (+.002/-.008) (+.004/-.008) (+.004/-.008) (±.004) (+.004/-.016) (0/-.020)
16.8
(.661”) 25.0
(.984”)
8
.2
10.9
5.9
P
S
P
S
P
S
P
S
P
S
12.4
19.4
11.0
30.7
(.323”)
(.429”)
(.232”)
E
A
B
C
D
(.488”)
(.764”) (.433”)
(1.209”)
16.4
8.0
11.1
6.2
(.646”)
(.315”)
(.437)
(.244”)
25.1
(.988”)
8.2
(.323”)
10.9
(.429”)
5.9
(.232”)
12.4
(.488”)
27.7 11.0
(1.091”) (.433”)
39.0
(1.535”)
33.3
(1.311”) 8.0
(.315”)
24.8
(.976”)
11.1
(.437)
6.2
(.244”)
38.8
(1.528”)
8.2
(.323”)
11.0
(.433”)
5.8
(.228”)
12.4
(.488”)
41.4 11.0
(1.630”) (.433”)
52.9
(2.083”) 38.5
(1.513”)
47.0
(1.850”) 8.0
11.1
(.437)
6.2
(.244”)
(.315”)
55.3
(2.177”)
8.2
(.323”)
11.0
(.433”)
5.8
(.228”)
12.4
(.488”)
57.9 11.0
(2.280”) (.433”)
69.2
(2.724”)
63.5
(2.500”)
54.9
(2.161”)
8.0
(.315”)
11.1
(.437)
6.2
(.244”)
52.7
(2.075”)
11.0
(.433”) 15.2
(.598”)
11.0
(.433”)
5.8
(.228”) 55.5 13.8
(2.185”) (.543”)
66.8
(2.630”)
61.1
(2.406”)
52.5
(2.067”)
10.9
(.429”)
11.1
(.437)
6.2
(.244”)
Panel cutouts
Optimal cutout for rear mounting
Standard cutout
A
A
B
B
10˚
10˚
øG
G H
R
F
E
D
D
Rd Rading J
Rd Rading J
C
C
A
B
C
D
E
F
G
H
J
Shell
size
Mounting
method
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
±0.20
(±.008)
22.2
(.874”)
20.5
(.807”)
30.5
(1.201”)
28.8
(1.134”)
44.3
(1.744”)
42.5
(1.673”)
60.7
(2.390”)
59.1
(2.327”)
58.3
11.1
(.437”)
10.2
(.402”)
15.3
(.602”)
14.4
(.567”)
22.1
(.870”)
21.3
(.839”)
30.4
(1.197”)
29.5
(1.161”)
29.2
13.0
(.512”)
11.4
(.449”)
13.0
(.512”)
11.4
(.449”)
13.0
(.512”)
11.4
(.449”)
13.0
(.512”)
11.4
(.449”)
15.8
6.5
(.256”)
5.7
(.224”)
6.5
(.256”)
5.7
(.224”)
6.5
(.256”)
5.7
(.224”)
6.5
(.256”)
5.7
(.224”)
7.9
2.1
(.083”)
3.4
(.0134”)
2.1
(.083”)
3.4
(.0134”)
2.1
(.083”)
3.4
(.0134”)
2.1
(.083”)
3.4
(.0134”)
2.1
Front
Rear
Front
Rear
Front
Rear
Front
Rear
Front
Rear
25.0
12.5
3.0
1.5
E
A
B
C
D
(.984”)
(.492”)
(.118”)
(.059”)
33.3
(1.311”)
16.7
(.657”)
3.0
(.118”)
1.5
(.059”)
47.0
(1.850”)
23.5
(.925”)
3.0
(.118”)
1.5
(.059”)
2
63.5
(2.500”)
31.7
(1.248”)
3.0
(.118”)
1.5
(.059”)
(2.295”)
56.3
(2.217”)
(1.150”)
28.2
(1.110”)
(.622”)
14.1
(.555”)
(.311”)
7.1
(.280”)
(.083”)
3.4
(.0134”)
61.1
(2.406”)
30.6
(1.205”)
3.0
(.118”)
1.5
(.059”)
Termination
Right angle
MIL Footprint
without bracket:
2.84 (.112”)
2.84 (.112”)
8.1 (.319”)
8.1 (.319”)
ø1.02 (.040”)
ø0.6 (.024”)
C
A4
plastic bracket:
8.1 (.319”)
2.84 (.112”)
8.1 (.319”)
2.84 (.112”)
ø1.02
(.040”)
ø0.6 (.024”)
AJ3
AJ4
metal bracket:
8.1 (.319”)
14.99 (.59”)
2.84 (.112”)
2.84 (.112”)
2.84 (.112”)
ø1.02 (.040”)
8.1 (.319”)
ø0.6 (.024”)
A
ø0.6 (.024”)
A
AM4: A=13.2mm
AZ4: A=11.5mm
AM4B
3
50 contacts:
8.1 (.319”)
2.84 (.112”)
Termination
European footprint
without bracket:
X
10.3
(.406”)
ø0.6 (.024”)
1AON: X=2.54mm
1BON: X=2.84mm
plastic bracket:
6.2 (.244”)
10.3 (.406”)
10.3 (.406”)
X
X
ø0.6 (.024”)
ø0.6 (.024”)
1APN: X=2.54mm
1BPN: X=2.84mm
1AUN: X=2.54mm
1BUN: X=2.84mm
metal bracket:
6.2 (.244”)
10.3 (.406”)
10.3 (.406”)
X
X
ø0.6 (.024”)
ø0.6 (.024”)
1AMN: X=2.54mm
1BMN: X=2.84mm
1ATN: X=2.54mm
1BTN: X=2.84mm
4
50 contacts:
10.3 (.406”)
X
Termination
Solder Cup:
Wire Wrap:
termination
F179
Nb of wraps
L
2
3
9.6mm (.378”)
13mm (.512”)
L
F179A
0.78/0.86
(.0.31”/.034”)
Straight PCB:
termination
Ø
L
U
V
0.6mm (.024”)
1.02mm (.040”)
0.6mm (.024”)
0.6mm (.024”)
3.2mm (.126”)
2.4mm (.095”)
4mm (.157”)
5.5mm (.217”)
L
T
ø
OL2
Grounding tabs:
For straight termination
For R/A termination
M3 or #4-40
FOR PCB 1.6
M3 or #4-40
for holes ø3.2 (.126”)
for holes ø3.2 (.126”)
for holes ø3.2 (.126”)
5
RM5
RM8
RM6
Panel mounting option
For straight and R/A termination
M3 or #4-40
float
3.6 (.141”)
3.4 (.134”)
ø3.1 (.122”)
ø2.2 (.086”)
Standard rivet 3.1mm
Float mounting
Threaded rear insert
no digit
F
H / G
M3 or #4-40
front screwlock
M3 or #4-40
removable screwlock
6.2 (.244”)
Fixed front female screwlock
Removable female screwlock
VF / VFM
VF2 / VFM2
Recommended PCB Layout
C
2 x ø3,2 (.126”)
F
D size
E,A,B,C size
X
X
2.74 (.108”) for size E,A
2.76 (.109”) for size B,C,D
0.9 (.035”) for U - T - OL2
and right angle termination
1.30 (.05”) for V termination
For straight PCB: X = 2.84mm (.112”)
MIL: X = 2.84mm (.112”)
European: X = 2.54mm (.100”), 2.84mm in option
For right angle PCB:
6
size E
size A
size B
size C
size D
C±0,1 (.004)
25 (.984)
33.3 (1.311)
47 (1.85)
63.5 (2.5)
61.1 (2.406)
F±0,05 (.002) 10.96 (.431)
19.18 (.755) 33.12 (1.304) 49.68 (1.956) 44.2 (1.74)
How to order
7
HD
D-Sub connectors - Stamped and Formed Contacts
RIGHT ANGLE
HIGH DENSITY CONNECTORS
Specifications
Amphenol’s high density
D-Sub connectors complement
Amphenol’s extensive D-Sub
connector line. This line offers many
superior features, high performance
level and low installation cost.
• Connectors according to: MIL C24308
Materials and Platings
Shells
Steel, tin over nickel plating
Glass filled thermoplastic, UL 94V-0
Copper alloy, selective gold plating
Brass with nickel plating
Body
Contacts
Rear insert
Screwlock
Grounding clip
The decreased contact spacing
accommodates greater signal
density in comparison to conventional
D-Sub connectors.
Brass with nickel plating
Copper alloy with tin plating
Electrical Data
Current rating
3A
Voltage rating
300V AC/rms 50Hz
1000V AC/rms 50HZ for one minute
5000MΩ
Economical
right angle PCB
Withstanding voltage
Insulation resistance
Contact resistance
10mΩ Max.
Climatic Data
Operating temperature -55°C to +125°C
Mechanical Data
Mating and unmating force
Unit: kg (lb)
• Industrial
• Telecom
• Any industry standard
I / O connections
No. of Cts
Mate (max)
3.81 (8.42)
Unmate (min)
0.52 (1.14)
1.05 (2.32)
1.37 (3.02)
1.76 (3.88)
15
26
44
62
5.95 (13.16)
9.26 (20.46)
13.48 (29.78)
Standard plating thickness
• gold flash
• 0.4µm (15µ”) gold
• 0.76µm (30µ”) gold
P.C.B. Layout
B
B
24.71 (.973)
0.59 (.023)
23.54 (.927)
3.69 (.145)
0.25 (.010)
5.47 (.215)
D
ø3.05 (.120)
ø1.19 (.047)
ø3.05 (.120)
ø1.19 (.047)
D
0.63 (.025)
0.89
(.035)
22.3 (.878)
23.5 (.925)
24.75 (.974)
4.83 (.190)
4.33 (.171)
15 PIN
62 PIN
B
B
9.65 (.380)
8.63 (.340)
16.51 (.650)
0.51 (.020)
15.49 (.610)
0.51 (.020)
D
D
ø3.05 (.120)
ø1.19 (.047)
ø3.05 (.120)
ø1.19 (.047)
0.64 (.025)
0.64 (.025)
16.64 (.655)
7.37 (.290)
8.5 (.335)
14.23 (.560)
15.36 (.605)
9.78 (.385)
26 PIN
44 PIN
Socket - Top side PCB layouts
Panel mounting option
# 4-40 screwlock or M3
# 4-40 or M3
Front female screwlock
4F / 3F
Threaded rear insert
4R / 3R
Shell size dimensions
A
B
C
POSITION #1
D
10˚
3.18 (.125)
NB OF
DIMENSIONS mm (inch)
CONTACTS
A
B
C
D
15
26
44
62
30.84 (1.214)
39.24 (1.545)
53.04 (2.088)
69.34 (2.730)
24.99 (.984)
16.26 (.640) 2.29 (.090)
33.32 (1.312) 24.56 (.967) 2.29 (.090)
47.04 (1.852) 38.30 (1.508) 2.29 (.090)
63.50 (2.500) 54.76 (2.156) 2.41 (.095)
How to order
L ... HD ... ... ... CH ... C309
RoHS Compliant
plating option
valid only for
0.76µm (30µ”)
77: tinned shell
for receptable
717: tinned shell
+ dimples
gold
flash
part numbers must be written
as follow:
for plug
77HD....................C309
or
717HD..................C309
177: tinned shell
for receptable
777: tinned shell
+ dimples
0.4µm
(15µ")
mounting options:
for plug
4R = rear insert 4-40
4F = front screwlock 4-40
3R = rear insert M3
configuration: E15, A26, B44, C62
3F = front screwlock M3
contact type:
P = Pin
S = Socket
PCB locking type:
grounding tabs + boardlocks
Footprint:
D0 : 1.50mm
D1 : 8.89mm
D2 : 5.08mm
D3 : 2.50mm
For special request, please consult factory
Do not hesitate to contact us for further information
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
G517-A
D-Sub connectors - Stamped and Formed Contacts
GENDER CHANGER
These connectors allow you to
change the gender of your cable
assembly, and or panel D-Sub connectors.
Specifications
• Connectors according to MIL C24308
This series gives you Amphenol's
high standards of quality and reliability
to meet all of your commercial
requirements.
Materials and Platings
Shells
Steel, 2.54µm (100µ”) tin over 1.27µm
(50µ”) nickel plated
Insulator
Glass-filled nylon, UL 94V-0
Pin contacts
Screwlock
Brass, gold plated over 1.27µm (50µ”) nickel
Brass, 2.54µm (100µ") min. nickel plated
Electrical Data
Current rating
5A
Voltage rating
250V AC/rms 60Hz
1000V AC/rms 60Hz for one minute
1000MΩ
Withstanding voltage
Insulation resistance
Contact resistance
Economical
gender changer
D-Sub’s
20mΩ max
Climatic Data
Operating temperature -55°C to +105°C
• Industrial
• Telecom
• Any industry standard
I / O connections
Shell size dimensions
Male to male adaptor
PAPT
Nb OF
DIMENSIONS mm (inch)
NUMBER
CONTACTS
A
B
C
L G517 97001
L G517 97002
L G517 97003
L G517 97004
9
30.81 (1.21)
39.14 (1.54)
53.04 (2.09)
69.32 (2.73)
24.99 (.984)
33.32 (1.31)
47.04 (1.85)
63.5 (2.50)
16.92 (.666)
25.25 (.994)
38.96 (1.53)
55.42 (2.18)
15
25
37
Shell size dimensions
Male to female adaptor
PAPT
Nb OF
DIMENSIONS mm (inch)
NUMBER
CONTACTS
A
B
C
D
L G517 97009
L G517 97010
L G517 97011
L G517 97012
9
30.81 (1.21)
39.14 (1.54)
53.04 (2.09)
69.32 (2.73)
24.99 (.984)
33.32 (1.31)
47.04 (1.85)
63.5 (2.50)
16.92 (.666)
25.25 (.994)
38.96 (1.53)
55.42 (2.18)
16.33 (.643)
24.66 (.971)
38.38 (1.51)
55.84 (2.20)
15
25
37
Shell size dimensions
Female to female adaptor
PAPT
Nb OF
DIMENSIONS mm (inch)
NUMBER
CONTACTS
A
B
C
L G517 97005
L G517 97006
L G517 97007
L G517 97008
9
30.81 (1.21)
39.14 (1.54)
53.04 (2.09)
69.32 (2.73)
24.99 (.984)
33.32 (1.31)
47.04 (1.85)
63.5 (2.50)
16.33 (.643)
24.66 (.971)
38.38 (1.51)
55.84 (2.20)
15
25
37
Do not hesitate to contact us for further information
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
G517-B
D-Sub connectors - Stamped and Formed Contacts
ADAPTORS D-SUB TO D-SUB
9 TO 9 AND 25 TO 25
This series gives you Amphenol’s high
standards of quality and reliability to
meet all of your commercial
requirements.
Specifications
• Connectors according to MIL C24308
Materials and Platings
Shells
Steel, 2.54µm (100µ”) tin over 1.27µm
(50µ”) nickel plated
Insulator
Glass-filled nylon, UL 94V-0
Brass, gold plated over 1.27µm (50µ”) nickel
Phosphor bronze, gold plated over
1.27µm (50µ”) nickel
Pin contacts
Socket Contact
Overmold
Screw
PVC, UL 94V-0
Brass with nickel plating
Economical
D-Sub
Electrical Data
Current rating
5A
Voltage rating
250V AC/rms 60Hz
1000V AC/rms 60Hz for one minute
1000MΩ
adaptors
Withstanding voltage
Insulation resistance
Contact resistance
20mΩ max
• Industrial
• Telecom
Climatic Data
Operating temperature -55°C to +105°C
• Any industry standard
I / O connections
Shell size dimensions
9-position to 9-position
Wiring table
J1
J2
2
3
3
2
4
6
5
5
6
4
7
8
8
7
PAPT
NUMBER
Description
Color
L G517 97001
L G517 97002
L G517 97015
beige
gray
black
D-Sub Male 9-pos. to D-sub Male 9-pos.
L G517 97016
L G517 97017
L G517 97018
beige
gray
black
D-Sub Female 9-pos. to D-sub Female 9-pos.
D-Sub Male 9-pos. to D-sub Female 9-pos.
L G517 97019
L G517 97020
L G517 97021
beige
gray
black
Shell size dimensions
25-position to 25-position
Wiring table
J1
J2
1
1
2
2
3
3
4
4
...
...
24
24
25
25
PAPT
NUMBER
Description
Color
L G517 97022
L G517 97023
L G517 97024
beige
gray
black
D-Sub Male 25-pos. to D-sub Male 25-pos.
L G517 97025
L G517 97026
L G517 97027
beige
gray
black
D-Sub Female 25-pos. to D-sub Female 25-pos.
D-Sub Male 25-pos. to D-sub Female 25-pos.
L G517 97028
L G517 97029
L G517 97030
beige
gray
black
MP
D-Sub connectors - Stamped and Formed Contacts
IDC DISCRETE
WIRE CONNECTORS
Amphenol IDC discrete D-subs offer
low-profile design that accommodates
many of the compact requirements of
computer interfacing, instrumentation
and, business equipment.
Materials and Platings
Shells
Steel, tin over nickel
Phosphor bronze
Contacts
Plating
Contact area: gold over nickel
IDC area: tin over nickel
Fast, four-point solderless termination
ensures reliable connections.
Wire types
Solid and stranded wires AWG 24-28
This series is available in 9, 15, 25, & 37
contact configurations.
Contacts, including stain relief, are
easily removable in case of repair.
Electrical Data
Current rating
Voltage rating
Dlelectric
5A
500V AC at sea level
Thermoplastic Polyesther UL 94 VO rated
Simplify
your cable
assemblies
Climatic Data
Operating temperature -55°C to +125°C
Salt spray
24 hours
Mechanical Data
Mating and unmating force
Size E 30 N Max. 3.5 N Mini.
Size A 50 N Max. 4.5 N Mini.
Size B 83 N Max. 8.0 N Mini.
Size C 123 N Max. 11.0 N Mini.
• Industrial
• Telecom
Standard plating thickness
Gold flash
0.4µm (15µ") Gold
0.76 µm (30µ") Gold
• Any industry standard
I / O connections
Plug version
Nb OF
CONTACTS
9
DIMENSIONS mm (inch)
A
B
C
D
30.81
(1.21)
16.92
(0.67)
24.99
(0.98)
14.90
(0.59)
15
25
37
39.14
(1.54)
25.25
(0.99)
33.32
(1.31)
23.00
(0.91)
53.04
(2.09)
38.96
(1.53)
47.04
(1.85)
36.90
(1.45)
69.32
(2.73)
55.42
(2.18)
63.50
(2.50)
59.30
(2.33)
Socket version
Nb OF
CONTACTS
9
DIMENSIONS mm (inch)
A
B
C
D
30.81
(1.21)
16.24
(0.64)
24.99
(0.98)
14.90
(0.59)
15
25
37
39.14
(1.54)
24.56
(0.97)
33.32
(1.31)
23.00
(0.91)
53.04
(2.09)
38.38
(1.51)
47.04
(1.85)
36.90
(1.45)
69.32
(2.73)
54.76
(2.16)
63.50
(2.50)
59.30
(2.33)
Tooling for IDC connectors
Terminating frame Ref: 21046
Terminating head Ref: 976 MC
Connector holders references
Number
Plug
Socket
of Contacts
09
991 MC 992 MC
15
25
993 MC 994 MC
995 MC 996 MC
37
997 MC 998 MC
Hand tool
Ref: 989 MC Single insertion tool
How to order
L 17MP ... ... ... ... ... ...
RoHS Compliant
OPTION: consult factory
Flange mounting option
IDC Series
0 = Clear hole ø3.1mm (.122”)
1 = Rear insert # 4-40
2 = Rear insert M3
Number of position
09 = 9 ways
15 = 15 ways
25 = 25 ways
37 = 37 ways
3 = Front screwlock # 4-40
4 = Front screwlock M3
Front shell plating
1 = Tinned
Contact type
(plugs with dimples)
0 = Socket
1 = Plug
Contact plating
Selective gold plating
0 = Gold flash
1 = 0.4 µm (15µ”)
2 = 0.76 µm (30µ”)
Do not hesitate to contact us for further information
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
Sealed D-Sub Connectors
SD308
SPECIFICATIONS:
PRODUCT FEATURES
• One piece machined Aluminum Shell
• Gold Plated Screw Machine Contacts
For Sea, Air or Land,
these connectors are SEALED!
Amphenol’s SD308 Sealed
• Hi Grade Thermoplastic Inserts -67°F to +257°F (-55°C to +125°C)
• Integrated Blind Panel Mounts
• Supplied with Conductive Panel Seal Gasket
D-Subminiature Connectors
are available in the full range of
standard density and hi-density
insert arrangements, pin and
socket contacts. These connectors
are supplied with fixed screw
machine contacts and are available
in Solder Cup, Straight PCB, and
Right Angle PCB terminations.
MATERIALS AND PLATINGS
Shells
Machined aluminum alloy, tin plated
Inserts
Contacts
Seal
High temperature resistant polyethersulfone per mil-p-46185
Copper alloy, 20µ" (0.51µm) gold plated over nickel.
Silicone elastomer with nickel plated graphite flake
ELECTRICAL DATA
Current Rating
Insulation Resistance
Working Voltage
D.W.V.
5A
5 GIGOHM @ 500 VDC
120 VAC
1,000 VAC pin to pin & pin to shell
• Ruggedized Computers
and Peripheral Equipment
• Industrial Controllers
• 21st Century Soldier
• Ideal For Retrofit Applications
Or Late Design-In
CLIMATIC DATA
Operating Temperature
-67°F to +257°F (-55°C to +125°C)
SD308 - E09 - S - A - 1 - 000
Series Designation
000 = Standard part
other deviations as required
Shell Size & Number 0f Contacts
STD Density E09, A15, B25, C37, D50
Mounting Type
HIGH Density E15, A26, B44, C62, D78, 6106
1 = 4-40 Blind Nut
2 = 4-40 Blind Nut with R/A Mounting Bracket
Contact Type
S=Socket Contact P= Pin Contact
Termination Style
A = Right Angle pcb B = Vertical pcb
C = Solder Cup
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
53
Filtered D-Sub Connectors, Ruggedized
FD308
SPECIFICATIONS:
DESCRIPTION
• Hi reliability filtering in multi row arrangements
• Stamped and Formed shells
• Screw Machine Contacts and Hi Reliability inserts
• Available in all Hi-Density insert patterns
For 50 position and all high density
versions. Amphenol’s FD308 Filtered
D-Subminiature connectors are
available in the full range of hi-
density insert arrangements, pin and
socket contacts, plus the 50 position
standard density. These connectors
are supplied with fixed screw
MATERIALS AND PLATINGS
Shells
Inserts
Contacts
Stamped steel shell, tin plated
High temperature resistant polyethersulfone per MIL-P-46185
Machined copper alloy, 20µ" (0.51µm) gold plated over nickel
Capacitor Barium titanate ceramic array
ELECTRICAL DATA
machine contacts and are available
in Straight and Right Angle PCB
terminations and Solder Cup.
Current Rating
Insulation Resistance
Working Voltage
D.W.V.
5 A
5 GIGOHM @ 500 VDC
200 VDC
500 VDC pin to pin & pin to shell
+/- 20% ( see P/N description )
Capacitance
• Computers and Peripheral Equipment
• Avionics Systems Ideal For Retrofit
Applications Or Late Design-In
CLIMATIC DATA
Operating Temperature
-67°F to +257°F (-55°C to +125°C)
FD308 - B44 - S - A - 1 - A2 - 000
Series Designation
000 = Standard part
other deviations as required
Size & Number 0f Contacts
STD Density E09, A15, B25, C37, D50
High Density E15, A26, B44, C62, D78, 6104
Capacitance Code
A2 = 200 PF
A4 = 400 PF
01 = 1000 PF
02 = 2000 PF
05 = 5000 PF
Contact Type
S = Socket Contact P = Pin Contact
Mounting Type
1 = 4-40 Clinch Nut
Termination Style
2 = Ø.120 (3.05) Hole
3 = R/A Mounting Bracket
4 = 4-40 Clinch Nut
A = Right Angle pcb
B = Vertical pcb
C = Solder Cup
with R/A Mounting Bracket
54
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
Ordering Information
FCC17
ORDERING INFORMATION - IDC
FCC17 - E09 - S - W - 4 - 8 - 0 - G
Series Designation
Special
G: 50 Micro Inches Gold
Size and Configuration
15 & 25 Size Consult Factory.
Modifier
0: Standard Product
x: Special or Custom Versions
Connector Type
S: Socket P: Pin Consult Factory.
Capacitance Value
D: 50 pF
Termination Type
5: 1,000 pF
E: 2,200 pF
9: 5,600 pF
8: 47,000 pF
W: IDC *
0: 180 pF
F: 330 pF
1: 470 pF
4: 820 pF
Mounting
2: .120 (3.05) Diameter Through Hole
4: 4-40 Threaded Inserts
6: M3 Threaded Inserts
Other Capacitance values available.
Consult Factory.
ORDERING INFORMATION - FILTERED PRESS FIT
FCC17 - B25 - S - R - 4 - 8 - 0 - G
Series Designation
Special
G: 50 Micro Inches Gold
Size and Configuration *
Modifier
Connector Type
0: Standard Product
x: Special or Custom Versions
S: Socket P: Pin Consult Factory.
Termination Type
Capacitance Value
D: 50 pF
R: Press Fit
5: 1,000 pF
E: 2,200 pF
9: 5,600 pF
8: 47,000 pF
0: 180 pF
F: 330 pF
1: 470 pF
4: 820 pF
Mounting
2: .120 (3.05) Diameter Through Hole
3: 4-40 Self Locking Threaded Insert
4: 4-40 Threaded Inserts
5: 4-40 Threaded Standoff
6: M3 Threaded Inserts
E: Code 4 with 4-40 Hex Jack Socket
Other Capacitance values available.
Consult Factory.
ORDERING INFORMATION - STACKED D-SUB
FCC17 - 2 - BP - BS - 4 - 5 - 5 - X
Series Designation
Modifier
0: Standard Product
Vertical Mounting Dimension Between Connectors
1 = .625 (15.88)
x: Special or Custom Versions
Lower Connector Filter Capacitance
same as Upper Connector Filter
Capacitance Designation
2 = .750 (19.05)
Upper Connector Configuration (Size and Style)
EP: 9 pin
ES: 9 socket
AP: 15 pin
BP: 25 pin
BS: 25 socket
CP: 37 pin
Upper Connector Filter Capacitance
D:
0:
F:
1:
4:
50 pF
180 pF
330 pF
470 pF
820 pF
5:
E:
7:
9:
8:
1,000 pF
2,200 pF
1,200 pf
5,600 pF
47,000 pF
AS: 15 socket
CS: 37 socket
Lower Connector Configuration
(Size and Style) same as Upper Connector Configuration
Mounting
* For Additional Mounting Options and
Filter Capacitance - Consult Factory
2: .120 (3.05) Diameter Through Hole on Flanges
4: 4-40 Threaded Inserts on Flanges
E: 4-40 Hex Jack Sockets (supplied loose)
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
55
Ordering Information
FCC1 7
ORDERING INFORMATION - D-SUB
FCC17 - B25 - S - C - 4 - 4 - 0 - G
Series Designation
Specials
No Digit: Standard 15µ" (0.38µm) gold
G: 50µ" (1.27µm) gold
Size
E09, A15, B25, C37
K: 30µ" (0.76µm) gold
L: Standard Connector
with added ferrite block
Connector type
A - Adapter P - Pin S - Socket
Modifier
0 = Standard Product
Termination Type
(Boardlocks on Right Angle D-Subs)
B = Metal Mounting Brackets,
for Right Angle D-Subs
A - Right Angle PC Tail, .318 (8.08) Footprint
B - Right Angle PC Tail, .405 (10.29) Footprint
C - Right Angle PC Tail, .590 (14.99) Footprint
D - Pin/Socket Adapter
E - Vertical Mount PC Tail
M - Solder Cup
N - Vertical Mount PC Tail -
Long Body
D = .315 (8.00) to Boardlock
for .590 (14.99) footprint
Mounting options*
E = Plastic Bracket - No Boardlock
F = No Boardlock, No plastic or metal Bracket -
Alignment Strip Only
A: 4-40 Threaded PC Tail Standoffs with
Boardlock, Vertical Mount Only
E: 4-40 Hex Jack Sockets (supplied loose)
F: 4-40 Round Fixed Jack Sockets
2: .120 (3.05) diameter Through hole
3: Self-Locking 4-40 Threaded Inserts
4: 4-40 Threaded Inserts (Standard)
5: 4-40 Threaded Stand-Offs, Vertical Mount
6: M3 Threaded inserts
X = Specials or Custom Versions
Filter Capacitance (pF)*
D: 50
pF
pF
pF
pF
pF
pF
5: 1,000 pF
7: 1,200 pF
E: 2,200 pF
9: 5,600 pF
8: 47,000 pF
B: 100
0: 180
F: 330
1: 470
4: 820
* For Additional Mounting Options and
Filter Capacitance - Consult Factory
ORDERING INFORMATION - COMBO D-SUB
FCC17 - A - 3W3 - P - M - 4 - 5 - 0 - G
Series Designation
Plating Option
Blank = Standard 30µ" (0.76µm) gold
G = 50µ" (1.27µm) gold
Shell Size
A, B, C, D, E
Modifier
0 = Standard
X = Specials or Custom versions
(Consult Factory)
Arrangement
Connector type
A = Adapter, P = Pin, S = Socket
Filter Capacitance (pF)
D:
B:
o:
f:
50
pF
5:
7:
E:
9:
8:
1000 pF
1200 pF
2200 pF
5600 pF
47000 pF
Termination type
D = Pin/Socket Adapter
E = Power PC Tail – 40A - .126 (3.20) Dia., .175 (4.44) Lg.
K = Power Solder Cup – 10A – Wire Size 16
L = Power Solder Cup – 20A – Wire Size 12
M = Power Solder Cup – 40A – Wire Size 8
R = Power Press Fit – 20A - .145 (3.68) Lg. - .126 (3.20) Dia. Hole
100 pF
180 pF
330 pF
470 pF
820 pF
I:
4:
Mounting Options
2 = .120 (3.05) dia. mounting holes 5 = 4-40 Standoffs - PC tail only
* For Additional Mounting Options and
Filter Capacitance - Consult Factory
3 = 4-40 Threads Self locking
4 = 4-40 Threads
6 = M3 Threads
E = 4-40 Hex Jack Sockets (supplied loose)
INCHES (MM)
56
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
D’Sub Metallic Hoods
DTZK & DVZK series
Amphenol metallic hood
• Material and plating:
Zinc die-cast, nickel plated
series for D’Sub connectors offers
protection from magnetic and radio
interference to cable assemblies.
• Cable strainrelief:
Steel fiber reinforced Polycarbonate UL94V-O
Easily assembled these hoods are
suitable for all industrial and telecom
applications.
• Temperature range:
-40˚C to 120˚C
• Cable diameter:
3 to 13mm
• Attenuation factor:
> 40 dB between 30 MHz and 1 GHz
• Approvals:
VDE 0871 - FCC 20780 - 89 / 336 / EU
Shield
Your cable
assemblies!
• Industrial
• Military
• Telecom
• Any application requiring
EMI/RFI protection
DTZK Series
47.4
(1.866")
B
Metal or
Plastic knob
A
C
Part number
A
B
21
(.827”)
38.3
(1.508”)
L17DTZK9Kxx
39.5
(1.555”)
40.5
(1.594”)
L17DTZK15Kxx
L17DTZK25Kxx
L17DTZK37Kxx
54.4
(2.144”)
47.3
(1.862”)
70.9
(2.791”)
52.2
(2.055”)
xx = Blank for plastic knob and FM for metal knob
DVZK Series
B
29.8
(1.173")
A
14.5 (.571")
Part number
A
B
31
(1.220”)
36,2
(1.425”)
L17DVZK9Kxx
L17DVZK15Kxx
39,5
(1.555”)
40,2
(1.583”)
53,2
(2.094”)
40,2
(1.583”)
9 Size equipped with
only one screw
L17DVZK25Kxx
L17DVZK37Kxx
69,7
(2.744”)
40,2
(1.583”)
xx = Blank for plastic knob and FM for metal knob
Assembly Instructions DTZK Series
Type
A
L17DTZK9Kxx
L17DTZK15Kxx
30
(1.181”)
L17DTZK25Kxx
L17DTZK37Kxx
40
(1.575”)
1.
2.
12~20mm (.472"~.787")
A
3.
4.
Assemby Instrutions DVZK Series
1.
12 ~ 20mm
A
(.475 ~ .787”)
2.
3.
4.
Type
A
L17DVZK9Kxx
L17DVZK15Kxx
30
(1.181”)
L17DVZK25Kxx
L17DVZK37Kxx
45
(1.772”)
Do not hesitate to contact us for further information
Amphenol IT & Communication Products
Block A3/A4, The 4th Industrial District of
Industrial Headquarters, Dong Keng Road
Gong Ming Town, Shen Zhen China
Fax:+86(0)755 2754 9955
Technical Support
Tel:+86(0)755 2717 7945
Info-dsub@amphenol.com.cn
http://www.dsubconnector.com
Plastic Backshell
ACCESSORIES
SPECIFICATIONS:
Housing Material:
Grommet Material:
Mounting Hardware:
Styrene (UL 94 VO)
Polypropylene
Steel, clear zinc finish *RoHS Compliant
Amphenol’s black plastic backshell
accommodates most standard and
high-density D-Subminiature
connectors and is appropriate
for most cable assemblies.
0.475
12.06
This version is economical and
highly durable. The split-grommet
insert provides cable strain relief
while making it easy to assemble.
DIMENSIONS AND ORDERING INFORMATION
Shell
Size
Standard #
of Contacts
Hi-Density #
of Contacts
Part
#
Dimensions
Cable Diameter Range
A
B
C
D
E
F
Minimum
Maximum
1.217
1.547
0.640
0.640
0.400
0.984
0.210
(5.33)
0.210
(5.33)
0.230
(5.84)
0.350
(8.89)
0.350
(8.89)
0.350
(8.89)
0.350
E
A
B
C
D
9
15
26
44
62
78
17E-1724-1
17E-1725-1
17E-1726-1
17E-1727-1
17E-1728-1
(30.91) (39.29) (16.26) (16.26) (10.16) (24.99)
1.545 1.505 0.640 0.640 0.400 1.312
(39.24) (38.23) (16.26) (16.26) (10.16) (33.32)
2.090 1.655 0.710 0.640 0.522 1.857
(53.08) (42.04) (18.03) (16.26) (13.26) (47.17)
2.734 1.830 0.906 0.640 0.726 2.500
(69.44) (46.48) (23.01) (16.26) (18.44) (63.50)
2.645 1.855 0.940 0.770 0.726 2.406
(67.18) (47.12) (23.88) (19.56) (18.44) (61.11)
15
25
37
50
(8.89)
0.450
(11.43)
0.640
(16.26)
0.640
(16.26)
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
57
Plated Plastic Backshell
ACCESSORIES
SPECIFICATIONS:
Housing Material:
Plating:
Grommet Material:
Mounting Hardware:
ABS Polymer
Nickel over copper
PVC (UL 94 VO)
Steel, clear zinc finish *RoHS Compliant
ASSEMBLY INSTRUCTIONS
1. Select the tightest insert that will fit over the cable and thread the cable
through it, placing the end with the smaller O.D. (the end without the
washer) towards the connector.
2. Cut the jacket, fold the shielding back over the outside of the insert
and cut it just short of the washer.
Amphenol’s plated plastic backshell
accommodates most standard and
high-density D-Subminiature
connectors and is appropriate
for cable assemblies requiring
compliance to FCC 20780.
3. Install jackscrews and connector.
4. Place the washer in the outermost depression in the exit area
of the hood and screw the cover closed.
This version is highly durable
and provides EMI/RFI protection.
The rubber grommet compression
insert forces the cable’s shielding
against the inside of the cable exit
area, assuring shielding.
DIMENSIONS AND ORDERING INFORMATION
Shell
Size
Standard #
of Contacts
Hi-Density #
of Contacts
Part
#
Dimensions
Cable Diameter Range
A
B
C
D
E
F
Minimum
Maximum
1.217
1.547
0.640
0.640
0.400
0.984
0.210
(5.33)
0.210
(5.33)
0.230
(5.84)
0.350
(8.89)
0.350
(8.89)
0.320
(8.13)
0.320
E
A
B
C
D
9
15
26
44
62
78
17E-1724-2
17E-1725-2
17E-1726-2
17E-1727-2
17E-1728-2
(30.91) (39.29) (16.26) (16.26) (10.16) (24.99)
1.545 1.505 0.640 0.640 0.400 1.312
(39.24) (38.23) (16.26) (16.26) (10.16) (33.32)
2.000 1.655 0.710 0.640 0.522 1.857
(50.8) (42.04) (18.03) (16.26) (13.26) (47.17)
2.730 1.830 0.906 0.640 0.726 2.500
(69.34) (46.48) (23.01) (16.26) (18.44) (63.50)
2.645 1.855 0.940 0.440 0.726 2.406
(67.18) (47.12) (23.88) (11.18) (18.44) (61.11)
15
25
37
50
(8.13)
0.450
(11.43)
0.650
(16.51)
0.650
(16.51)
INCHES (MM)
58
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
45º Plated
Plastic Backshell
ACCESSORIES
SPECIFICATIONS:
Housing Material:
Plating:
Grommet Material:
Mounting Hardware:
ABS Polymer
Nickel over copper
PVC (UL 94 VO)
Steel, clear zinc finish *RoHS Compliant
ASSEMBLY INSTRUCTIONS
1. Select the tightest insert that will fit over the cable and thread the cable
through it, placing the end with the smaller O.D. (the end without the
washer) towards the connector.
2. Cut the jacket, fold the shielding back over the outside of the insert
and cut it just short of the washer.
Amphenol’s plated plastic backshell
accommodates most standard
and high-density D-Subminiature
connectors and is appropriate
for cable assemblies requiring
compliance to FCC 20780.
3. Install jackscrews and connector.
4. Place the washer in the outermost depression in the exit area
of the hood and screw the cover closed.
This version is highly durable
and provides EMI/RFI protection.
The rubber grommet compression
insert forces the cable’s shielding
against the inside of the cable exit
area, assuring shielding. The 45°
cable exit helps save space behind
equipment.
DIMENSIONS AND ORDERING INFORMATION
Shell
Size
Standard #
of Contacts
Hi-Density #
of Contacts
Part
#
Dimensions
Cable Diameter Range
A
B
C
D
E
F
Minimum
Maximum
1.217
1.430
0.640
0.640
0.400
0.984
0.210
(5.33)
0.210
(5.33)
0.230
(5.84)
0.350
(8.89)
0.320
(8.13)
0.320
(8.13)
0.450
(11.43)
0.650
(16.51)
E
A
B
C
9
15
26
44
62
17E-1824-2
17E-1825-2
17E-1826-2
17E-1827-2
(30.91) (36.32) (16.26) (16.26) (10.16) (24.99)
1.545 1.568 0.640 0.640 0.400 1.312
(39.24) (39.83) (16.26) (16.26) (10.16) (33.32)
2.090 1.735 0.710 0.640 0.522 1.857
(53.09) (44.07) (18.03) (16.26) (13.26) (47.17)
15
25
37
2.734
1.976
0.906
0.640
0.726
2.500
(63.5)
(69.44) (50.19) (23.01) (16.26) (18.44)
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
59
Two-Piece Die Cast
Shielded Backshells
ACCESSORIES
SPECIFICATIONS:
Housing Material:
Grommet Material:
Mounting Hardware:
Die cast zinc
PVC (UL 94 VO)
Steel, clear zinc finish *RoHS Compliant
ASSEMBLY INSTRUCTIONS
1. Select the tightest insert that will fit over the cable and thread the cable
through it, placing the end with the smaller O.D. (the end without the
washer) towards the connector.
2. Cut the jacket, fold the shielding back over the outside of the insert
and cut it just short of the washer.
Amphenol’s metal backshell
accommodates most standard
and high-density D-Subminiature
connectors and is appropriate
for cable assemblies requiring
compliance to FCC 20780.
3. Install jackscrews and connector.
4. Place the washer in the outermost depression in the exit area
of the hood and screw the cover closed.
This version is highly durable
and provides EMI/RFI protection.
The rubber grommet compression
insert forces the cable’s shielding
against the inside of the cable exit
area, assuring shielding.
DIMENSIONS AND ORDERING INFORMATION
Shell
Size
Standard #
of Contacts
Hi-Density #
of Contacts
Part
#
Dimensions
Cable Diameter Range
A
B
C
D
E
F
Minimum
Maximum
1.217
1.430
0.640
0.640
0.400
0.984
0.210
(5.33)
0.210
(5.33)
0.230
(5.84)
0.350
(8.89)
0.320
(8.13)
0.320
(8.13)
0.450
(11.43)
0.640
(16.26)
E
A
B
C
9
15
26
44
62
17E-1657-09
17E-1657-15
17E-1657-25
17E-1657-37
(30.91) (36.32) (16.26) (16.26) (10.16) (24.99)
1.545 1.568 0.640 0.640 0.400 1.312
(39.24) (39.83) (16.26) (16.26) (10.16) (33.32)
2.090 1.735 0.710 0.640. 0.522 1.857
(53.09) (44.07) (18.03) (16.26) (13.26) (47.17)
2.734 1.976 0.906 0.640 0.726 2.500
(69.44) (50.19) (23.01) (16.26) (18.44) (63.5)
15
25
37
INCHES (MM)
60
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
相关型号:
L717DA15SC
D Subminiature Connector, 15 Contact(s), Female, Solder Terminal, Plug, ROHS COMPLIANT
AMPHENOL
©2020 ICPDF网 联系我们和版权申明