L77DAH15SVF2 [AMPHENOL]

D Subminiature Connector,;


型号：	L77DAH15SVF2
厂家：	Amphenol
描述：	D Subminiature Connector, 连接器
文件：	总117页 (文件大小：72336K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

D-SUBMINIATURE

ONNECTORS

ACCESSORIES

STANDARD DENSITY

SURFACE MOUNT RECEPTACLES

HIGH DENSITY

GENERAL DESCRIPTION:

Amphenol’s line of D-Subminiature rack and panel connectors is part of an industry standard for applications requiring reliable,

rugged, connectors. These connectors are designed to accommodate rack and panel, cable to panel and cable to cable applications.

D-Subminiature connectors are pin and socket devices that employ contacts encased in a molded dielectric insert surrounded by a

"D" shaped shell for polarization.

MARKETS:

Amphenol D-Subminiature connectors can be used in commercial, industrial or military markets. We offer a broad selection of

dielectric materials and contact styles and conﬁgurations to meet all of your design requirements.

APPLICATIONS INCLUDE:

•

Business equipment

Electronic ofﬁce systems

Data communications

Medical equipment

Mobile communications

Consumer electronics

AMPHENOL D-SUB FEATURES:

•

Industry standard interfacing RS232 and RS449 mating

conﬁgurations per EIA standards.

UL Component Recognition File number E64911

(617, 841, 17, 17D, 17HD, ED, 17RR, 17SD, 117DF, 17BH, 17TW

Variations available:

Solder cup

Straight pc mount solder

Right angle pc mount solder

Solderless wire wrap

Crimp

High Density Right Angle

High Density Straight

Stacked Right Angle PC mount

Surface mount

•

Five shell sizes offer widest choice of contact positions:

9, 15, 25, 37 and 50 in standard density and 15, 26, 44, 62

and 78 positions in high-density.

•

Inserts are ﬂame-retardant thermoplastic.

Accessories for all applications are available including strain

reliefs, cable clamps, shielded backshells, mating hardware

and connector to pc board mounting hardware.

•

Automatic and manual tooling is available for both crimp and IDC versions.

Contact Amphenol for lease information.

Dimensions and characteristics are subject to change without notice.

High Density

17E BH/HD SERIES

SPECIFICATIONS:

MATERIALS AND PLATINGS

Shells

Steel, tin plated,

grounding indents on plug.

Copper alloy

Engagement area: gold

(see ordering information).

150µ" (3.81µm) tin/lead

50µ" (1.27µm) entire contact

Contact Material

Contact Plating

Termination End

Nickel Underplate

Amphenol’s High Density

D-Subminiature connectors

ELECTRICAL DATA

compleme nt Amphenol’s extensive

D-Subminiature connector line.

This line of connectors offers many

superior features, high performance

level and low installation cost.

Current Rating

Voltage Rating

Dielectric Withstanding Voltage 1000 VAC (minimum)

Dielectric

3 Amps maximum per contact

125 VAC

Glass ﬁlled thermoplastic,

black, UL 94 VO

5,000 Megaohms (minimum)

15 Milliohms (maximum)

Insulation Resistance

Contact Resistance

The connector conﬁgurations

are available in 15, 26, 44, 62

and 78 positions.

CLIMATIC DATA

Operating Temperature

-67°F (-55°C) to 221°F (105°C)

The product offering includes PCB

mount connectors in both straight

or right angle termination styles.

Straight PCB mount are available in

both Fixed Screw Machine and

Stamped and Formed contacts,

while Right Angle PCB mount are

only available with Stamped and

Formed contacts.

A cable mount version with solder

terminations is also available, which

can be combined with Amphenol’s

standard line of shielded or

unshielded backshells.

• Industrial

• Telecom

• Any industry standard

I / O connections

INCHES (MM)

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

High Density / Right Angle, PC Mount

Front Metal Shell, .350 (8.89) Footprint / Fixed Contact

17E BH/HD SERIES

DIMENSIONS FOR 15 - 62 POSITION (3 ROW)(SHOWN WITH FIXED FEMALE SCREWLOCKS) DIMENSIONS FOR THE 78 POSITION (4 ROW)

ORDERING INFORMATION

BH Series High Density D-Sub

Front Metal Shell, Right-Angle PC Mount

17EBH 0XX - X - XX - X - XX

Series

PCB Mount Options

Clear hole

Arrowhead Board

Number Of Positions

15, 26, 44, 62, 78

Panel Mounting Options

Type

.120 (3.05) Clear Hole

#4-40 Threaded Hole

#4-40 Fixed Female Screw

Pin (male)

Socket (female)

Plating Code

Gold Flash over Nickel

AM 30µ" (.76µm) Gold over Nickel

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

High Density

17EHD SERIES

Solder Cup And Straight P.C. Mount / Double Metal Shell Fixed Contact

DIMENSIONS

Panel Mount Options

(standoff)

1 = .190 (5.8)

3 = .124 (3.8)

ORDERING INFORMATION

17E HD Series High Density D-Sub

Solder Cup & Straight P.C. Mount, Front Metal Shell Fixed Contact

17EHD 0XX - X - XX - X - XX

Series

Termination Types:

Solder Cup

Board-mount, Vertical

Board-mount, Vertical with Boardlocks

Board-mount, Vertical with standoff,

no boardlock

Number Of Positions

15, 26, 44, 62 ,78

Type

Pin (male)

Socket (female)

Panel Mounting Options:

.120 (3.05) Clear Hole

#4-40 Threaded Hole .190 (5.8)

#4-40 Fixed Female Screwlock

#4-40 Threaded Hole .124 (3.8)

Plating Code:

AA Gold Flash over Nickel

AM 30µ" (.76µm) Gold over Nickel

INCHES (MM)

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

Right-Angle Board Mount Connectors

Front Metal Shell

6E17 SERIES

SPECIFICATIONS:

MATERIALS AND PLATINGS

Shells

Steel, tin plated

Precision formed copper alloy

Gold over nickel

Engagement: 12 oz. max. (340.2 g)

Separation: .75 oz. min. (21.26 g)

Contacts

Contact Plating

Contact Forces

ELECTRICAL DATA

Current Rating

Dielectric Withstanding Voltage

Dielectric

5 amps

1000 VAC/60 sec.

Glass ﬁlled thermoplastic,

black, UL 94 VO

15 milliohms max.

Contact Resistance

Amphenol's 6E17 series of right angle

commercial connectors provide high

performance at competitive prices.

CLIMATIC DATA

Temperature Range

-67°F (-55°C) to 221°F (105°C)

The front metal shell helps to provide

reduced EMI/ RFI emissions, and the

contacts are selectively plated to

provide additional high performance.

The 6E17 series are available in a

variety of board mounting and

grounding options including

arrowhead boardlocks and #4-40

threaded inserts.

Front mounting holes are also

available threaded, un-threaded and

with installed female hex screwlocks.

• Industrial

• Telecom

• Any industry standard

I / O connections

INCHES (MM)

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

Right-Angle Board Mount Connectors

Front Metal Shell

6E17 SERIES

DIMENSIONS

ORDERING INFORMATION

6E17 X - 0XX - X - XX - X - XX - X

Series

Variation Code

E for U & Y Footprint

Number of Contacts

09, 15, 25, 37

Contact

Housing Characteristics

Tin plated receptacle

Tin plated plug with grounding indents

.318

.590

Description of PC

Board Mounting

Characteristics

(8.08)

(14.99)

Style

Code

Panel Mounting Options

.120 (3.05) clear hole

#4-40 threaded hole

#4-40 threaded hole with female screwlock

Fixed female round screwlock

Footprint Footprint

.120 (3.05) diameter mtg hole

with wrap-around ground strap

spit arrowhead boardlock

.120 (3.05) diameter mtg hole

#4-40 threaded mtg hole

C&E

Code

Contact Plating

split arrowhead boardlock

Engagement area 3µ" (.076µm) gold ﬂash,

terminal end area 100µ"/200µ (2.54µm/5.08µm)

tin/lead underplate of 50µ" (1.27µm) nickel

Engagement area 15µ" (.381µm) gold ﬂash,

terminal end area 100µ"/200µ (2.54µm/5.08µm)

tin/lead underplate of 50µ" (1.27µm) nickel

Engagement area 30µ" (.76µm) gold,

Code

Contact Type

Pin (male)

Socket (female)

terminal end area 100µ"/200µ (2.54µm/5.08µm)

tin/lead underplate of 50µ" (1.27µm) nickel

For ﬁltered version, see page 56.

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

Dual Port Connectors

6E17 H SERIES

SPECIFICATIONS:

MATERIALS AND PLATINGS

Shells

Steel, tin plated

Precision formed copper alloy

Gold over nickel

Engagement: 12 oz. max. (340.2 g)

Separation: .75 oz. min. (21.26 g)

Contacts

Contact Plating

Contact Forces

ELECTRICAL DATA

Amphenol's 61E7 series dual port

connectors are a state of the art

design. The front metal shell helps

reduce EMI/RFI emissions.

Current Rating

5 amps

Dielectric Withstanding Voltage 1000 VAC/60 sec.

Dielectric

Glass ﬁlled thermoplastic,

black, UL 94 VO

Contact Resistance

15 milliohms max.

Contacts are selectively plated for

high performance at a low cost.

CLIMATIC DATA

Temperature Range

-67°F (-55°C) to 221°F (105°C)

Designed to save PC board space,

Amphenol’s dual port “D” provides

two input output connectors in a

minimal amount of board space.

These connectors are available

with various stacking options:

same gender, mixed gender

and multiple pin counts.

INCHES (MM)

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

Dual Port Connectors

6E17 H SERIES

DIMENSIONS

Product Description

Bottom

Dimensions

Code

Letter

Top

Connector Connector

Socket

0.900 0.010

(22.86 0.25)

1.415

(35.94)

Socket

0.750 0.010

(19.05 0.25)

1.265

(32.13)

Socket

0.625 0.010

(15.88 0.25)

1.140

(28.96)

Socket

ORDERING INFORMATION

6E17H X - XX - X - XX - X - XX - X

Series

6E17H Dual port;

right angle solder tail

Variation Code

L for .311 (7.89) Footprint

Code

Housing Characteristics

Code Boardlock

Steel shell, tin plated receptacles without

grounding dimples (options B, F, K)

Steel shells, tin plated plugs with grounding

dimples (options A, E, J)

Steel shells, tin plated, plug shell with grounding dimples

and receptacle shell without dimples (options C,G,L,D,H,M)

Boardlock option

No PC boardlock

Code Number of Contacts

2 x 9

15 over blank

9 / 25

25 / 9+9

2 x 15

2 x 25

2 x 37

15 / 25

Code

Panel Mounting Options

120" clear hole

#4-40 threaded hole

H15A VGA / Triple Audio

#4-40 threaded hole with female screwlock

Consult factory for other available conﬁgurations

Code

Contact Plating

Engagement area 3µ" (.076µm) gold ﬂash,

terminal end area 100µ"/200µ" tin/lead, (2.54µm/5.08µm)

tin/lead underplate of 50µ" (1.27µm) nickel

Engagement area 15µ" (.381µm) gold ﬂash,

terminal end area 100µ"/200µ" (2.54µm/5.08µm)

tin/lead underplate of 50µ" (1.27µm) nickel

Engagement area 30µ" (.76µm) gold, terminal end area

100µ"/200µ (2.54µm/5.08µm) tin/lead underplate

of 50µ" (1.27µm) nickel

Product Description

58.064

(22.86)

48.388

(19.05)

40.31

(15.87)

Spacing

Top

Connector

Bottom

Connector

Spacing

Socket

For ﬁltered version, see page 55.

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

High Temperature

Straight Board Mount Connectors

6E17S SERIES

SPECIFICATIONS:

MATERIALS AND PLATINGS

Shells

Steel/nickel plated

Precision formed copper alloy

Gold over nickel

Contacts

Contact Plating

ELECTRICAL DATA

Current Rating

Voltage Rating

Dielectric

5 amps

600 V

Glass ﬁlled thermoplastic,

black, UL 94 VO

10 milliohms (max.)

Contact Resistance

Amphenol’s high temperature,

low proﬁle D-Sub connector gives

you a high quality, reliable

CLIMATIC DATA

commercial connector to meet

today’s market demands.

Temperature Range

Environmental:

-67°F (-55°C) to 302°F (150°C)

IR-Air Convection

Process Compatibility

500°F (260°C) for 20 seconds

INCHES (MM)

14 14

TELTEPEHLEOPNHEO:N(E4:1(64)1765)47-5546-55665F6AX:F(A4X1:6(4) 1765)47-85646-86E6-8MAEIL-:MSAAILE:SS@ALAEMS@PHAEMNPOHLECNAONLACDAAN.CAODMA.COM

High Temperature

Straight Board Mount Connectors

6E17S SERIES

DIMENSIONS

ORDERING INFORMATION

6E17S C - 0XX - X - XX - X - XX

Series

Code

Housing Characteristics

Tin plated receptacle

Tin plated

Code

Boardlock

Split arrowhead boardlock

No boardlock

Code

Panel Mounting Options

#4-40 threaded hole

#4-40 threaded hole with

female screwlock

Number of contacts

9, 15, 25 or 37

M-3 threaded hole

Code

Gender

Pin (male)

Socket (female)

Code

Contact Plating

Engagement area 10µ" (2.54µ) gold,

terminal end area 100µ"/200µ" (2.54µ/5.08µ)

-tin/lead, underplate of 50µ" (1.27µ) nickel

Engagement area 30µ" (.76µ) gold,

terminal end area 100µ"/200µ" (2.54µ/5.08µ)

-tin/lead, underplate of 50µ" (1.27µ) nickel

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

ED-EHD

D-Sub connectors - Screw-machined contacts

STANDARD AND HIGH DENSITY

WATERPROOF CONNECTORS

The 17ED and 17EHD series are

suitable for waterproof applications.

Materials and Platings

Shells

Body

Steel 2.5µm(100µ”) min tin over 1.25µm(50µ”) min nickel

Glass-filled thermoplastic

The machined contacts provide

robustness and reliability.

Flame retardant to UL94 V-0 Color Black

Copper alloy(Brass for plug, Phospher bronze for socket)

gold over 1.25µm(50µ”) min nickel

Contacts

This series offers:

- Panel mount connectors with

solder cup, straight and right

angle PCB terminations.

Boardlock

Standoff

Copper alloy, 100µ” min. sn over 50µ” min. nickel.

Connectors are waterproof unmated.

Electrical Data

Current rating

Voltage rating

5.0A

300V rms at 50Hz

Insulation resistance

Contact resistance

>5000MΩ

Harsh environment

connectors

20mΩ Max.

Climatic Data

Operating temperature -55°C to +85°C

Salt spray

48 hours

Waterproof rating

IP 67 minimum

Mechanical Data

Mating and unmating force

Unit: kg (lb)

• Marine electronic devices

• Industrial electrical

• Security Monitoring

• Robotics

No. of Cts

EHD

Mate (max) Unmate (min) Mate (max) Unmate (min)

3.05 (6.74)

5.09 (11.24)

8.44 (18.66)

0.36 (0.79)

0.46 (1.01)

0.81 (1.80)

3.81 (8.42)

5.95 (13.16)

9.26 (20.46)

0.52 (1.14)

1.05 (2.32)

1.37 (3.02)

• Lighting systems

Mating cycles

Gold flash

: 100 cycles

0.76µm (30µ”) : 500 cycles

Termination

Solder cup (blank) :

6.5 (0.256)

8.2 (0.323)

5.8 (0.228)

Standard density

High density

Straight PCB with standoff and boardlocks:

8.2 (.323)

7.9 (.311)

4.0 (.157)

Standard density

High density

Right angle PCB with brackets and boardlocks:

10.9 (0.429)

3.5 (0.138)

ø0.6(.024)

6.7 (0.263)

2.84 (0.112)

ø0.6(.024)

5.58 (0.219)

2.54 (0.100)

Standard density

High density

Right angle PCB without brackets and boardlocks:

10.9 (0.429)

5.58 (0.219)

2.54 (0.100)

3.5 (0.138)

ø0.6(.024)

2.54 (0.100)

6.7 (0.263)

2.84 (0.112)

ø0.6(.024)

Standard density

High density

Shell Size Dimensions

F / F’

B’

D D’

3.85

SHELL Contact

±0.25

B’

+0.20 / 0

±0.10

D’

+0.25 / 0

±0.25

F’

±0.10

SIZE

P: pin

S: socket

0 / -0.20

(0/-.008

0 / -0.25

(0/-.010)

+0.10/-0.20

(+.004/-.008)

(±.010)

(+.008/0)

(±.004)

(+.010/0)

(±.010)

(±.004)

39.4

16.8(0.661)

25.1(0.988)

28.8(1.528)

25.0

8.2(0.325)

21.0

5.9(0.232)

(1.551) 16.4(0.646)

(0.984) 8.0(0.315)

(0.827) 6.2(0.244)

47.7

33.3

21.0

(1.878) 24.8(0.976)

(1.311) 8.0(0.315)

(0.827) 6.2(0.244)

64.5

47.0

21.0

(2.539) 38.5(1.513)

(1.850) 8.0(0.315)

(0.827) 6.2(0.244)

Panel cutouts

PANEL THICKNESS

2.0 Max

R1.5

SHELL

SIZE

±0.10(±.004)

28.8 (1.111)

36.5 (1.438)

51.0 (2.009)

0 / -0.10(0 / -.004)

20.0 (0.788)

28.0 (1.103)

41.5 (1.635)

Connector Dimensions

5mm

6mm

Description

Housing

Material

Qty

Black thermoplastic UL 94-VO

Front shell

Steel tin plated

Ring

Silicone

#4-40 Front screw lock

Brass tin plated

How to order

L17 ED ... ... ... ...

contact plating:

0 : gold flash

1 : 0.38µm gold (15µ”)

2 : 0.76µm gold (30µ”)

L17ED: standard density series

L17EHD: high densty series

Number of contacts

Termination:

Standard density: 9, 15, 25

0 : Solder cup

High density:

15, 26, 44

1 : Straight PCB without

stand-off or boarlocks

2 : Straight PCB with stand-off

and boarlocks

3 : Right angle PCB without

brackets or boarlocks

4 : Right angle PCB with

brackets and boarlocks

Contact type:

P : Pin

S : Socket

For special request, please consult factory

Do not hesitate to contact us for further information

Amphenol IT & Communication Products

Block A3/A4, The 4th Industrial District of

Industrial Headquarters, Dong Keng Road

Gong Ming Town, Shen Zhen China

Fax:+86(0)755 2754 9955

Technical Support

Tel:+86(0)755 2717 7945

Info-dsub@amphenol.com.cn

http://www.dsubconnector.com

Hybrid D’Sub series

Specifications

Amphenol D’Sub TW Hybrid Series permits

a mix of contacts including signal, power,

shielded, high voltage and fiber optics in the

same housing with 18 different contacts

arrangements.

• Connectors according to: MIL C24308 - NFC93425 - HE507

Materials and platings

Electrical Data

Shells

Steel-Tin plating Current rating

Signal contacts

Power contacts

PCB terminations

Solder cup terminations

Crimp terminations

Shielded contacts

Voltage rating

Signal and power contacts 300 V.R.M.S. at 50 Hz

Shielded contacts

Frequency range

Attenuation

V. S. W. R.

Characteristic impedance

Dielectric withstanding

voltage

Insulation resistance ≥ 5000 M Ohms at 500 VDC

Contact resistance

Shell resistance

7.5 A. with 10 A. peaks

This economic series was fist developed from

our military series, and has improved features:

Insulators

Signal contacts

Material

Plating finish

Shielded contacts

Material

Plating

Inner conductor

Outer ring

Terminations

Except solder cup and crimp terminations gold flash

Power contacts

Material

Plating

Contacts

Terminations

Except solder cup and crimp terminations gold flash

High temperature black thermoplastic

Female: machined bronze

10 to 40 A.

0.5 A.

Male: machined brass

16µ “Au over 79µ” Ni min.

30µ” Au over 79µ” Ni min.

- new contacts

- new high temperature black thermoplastic insert

- PCB configurations come preloaded with

fixed contacts and brackets.

Female: machined bronze

Male: machined brass

150 V.R.M.S. at 50 Hz

These connectors are supplied with screw

machined contacts which are fixed in the insulator.

16µ “Au or 30µm Au over 79µ” Ni

10µ “Au over 79µ” Ni

Tinned

0-1 GHz

0.2dB

1.4(+0.04/GHz)

50 Ohms

Acomplete range of housings are also

available for cable application.

Female: machined bronze

Male: machined brass

A full range of

arrangements

compatible with

reflow process

≥ 1000 V.R.M.S. at 50Hz

16µ “Au or 30µ” Au over 79µ” Ni

Tinned

≤ 5m Ohms

≤ 1m Ohm

Brackets

Steel-Tin plating

Brass-Tin plating

Bronze-Tin plating

Brass-Tin plating

(electrical grounding)

Front jackscrews

Rear clinch nuts

Boardlocks

Stand-off

• Commercial

Climatic Data

Mechanical data

With or without dimples

Operating temperature

-55˚C + 155˚C Shells

• Medical

(with peaks up to 180˚C)

56 days (40˚C - 95% HR)

48 hours

Contact retention force in dielectric material > 40N

• Industrial

• Telecom

Damp heat

Salt spray

Maximum mating and unmating force

With dimples

E size = 70 N

A size = 80 N

B size = 100 N

C size = 150 N

D size = 180 N

E size = 30 N

A size = 50 N

B size = 80 N

C size = 120 N

D size = 160 N

• Any application requiring

optimization of space

Without dimples

Compatible with process

IR - Air convectioned

260˚ for 20 s.

Resistance to solder iron heat

260˚C for 30 s.

Mating cycles

Blind mating system

≥ 200 (classe ll) or 500 (classe l)

Available upon request

Polarization

Available with locking accessories

Consult factory

Shell and contacts plating

CLASS ll

0.4µm (16µ”) Au contacts gold plating

200 mating cycles

CLASS l

0.76µm (30µ”) Au contacts gold plating

500 mating cycles

Types

Shells and plating

Types

Shells and plating

Tin plated shell

*Male and female

Tin plated shell

*Male and female

77 TW

177 TW

777 TW

Tin plated shell with dimples

Male only

Tin plated shell with dimples

Male only

717 TW

Housing arrangements

Male front view

Arrangement ......

Shell size ............

5W1

7W2

11W1

Arrangement ......

Shell size ............

3W3

5W5

9W4

Arrangement ......

Shell size ............

13W3

17W2

21W1

Arrangement ......

Shell size ............

27W2

13W6

17W5

Arrangement ......

Shell size ............

21W4

8W8

25W3

Arrangement ......

Shell size ............

24W7

36W4

43W2

Shell size dimensions

1.5

10˚

0.9

B’

D’ D E

ø 3.1

Contact

P: Pin

S: Socket

B‘

D‘

F‘

G‘

Shell

size

±0.25

(±.010)

0/-0.20

+0.20/0

±0.10

(±.004)

0/-0.25

+0.25/0

±0.20

+0.05/-0.20 +0.10/-0.20 +0.10/-0.20

±0.10

+0.10/-0.40

0/-0.50

(0/-.008) (+.008/0)

(0/-.010) (+.010/0)

(±.008) (+.002/-.008) (+.004/-.008) (+.004/-.008) (±.004) (+.004/-.016) (0/-.020)

16.8

(.661”) 25.0

(.984”)

10.9

5.9

12.4

19.4

11.0

30.7

(.323”)

(.429”)

(.232”)

(.488”)

(.764”) (.433”)

(1.209”)

16.4

8.0

11.1

6.2

(.646”)

(.315”)

(.437)

(.244”)

25.1

(.988”)

8.2

(.323”)

10.9

(.429”)

5.9

(.232”)

12.4

(.488”)

27.7 11.0

(1.091”) (.433”)

39.0

(1.535”)

33.3

(1.311”) 8.0

(.315”)

24.8

(.976”)

11.1

(.437)

6.2

(.244”)

38.8

(1.528”)

8.2

(.323”)

11.0

(.433”)

5.8

(.228”)

12.4

(.488”)

41.4 11.0

(1.630”) (.433”)

52.9

(2.083”) 38.5

(1.513”)

47.0

(1.850”) 8.0

11.1

(.437)

6.2

(.244”)

(.315”)

55.3

(2.177”)

8.2

(.323”)

11.0

(.433”)

5.8

(.228”)

12.4

(.488”)

57.9 11.0

(2.280”) (.433”)

69.2

(2.724”)

63.5

(2.500”)

54.9

(2.161”)

8.0

(.315”)

11.1

(.437)

6.2

(.244”)

52.7

(2.075”)

11.0

(.433”) 15.2

(.598”)

11.0

(.433”)

5.8

(.228”) 55.5 13.8

(2.185”) (.543”)

66.8

(2.630”)

61.1

(2.406”)

52.5

(2.067”)

10.9

(.429”)

11.1

(.437)

6.2

(.244”)

Panel cutouts

Optimal cutout for rear mounting

Standard cutout

10˚

øG

G H

Rd Rading J

Shell

size

Mounting

method

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

22.2

(.874”)

20.5

(.807”)

30.5

(1.201”)

28.8

(1.134”)

44.3

(1.744”)

42.5

(1.673”)

60.7

(2.390”)

59.1

(2.327”)

58.3

11.1

(.437”)

10.2

(.402”)

15.3

(.602”)

14.4

(.567”)

22.1

(.870”)

21.3

(.839”)

30.4

(1.197”)

29.5

(1.161”)

29.2

13.0

(.512”)

11.4

(.449”)

13.0

(.512”)

11.4

(.449”)

13.0

(.512”)

11.4

(.449”)

13.0

(.512”)

11.4

(.449”)

15.8

6.5

(.256”)

5.7

(.224”)

6.5

(.256”)

5.7

(.224”)

6.5

(.256”)

5.7

(.224”)

6.5

(.256”)

5.7

(.224”)

7.9

2.1

(.083”)

3.4

(.0134”)

2.1

(.083”)

3.4

(.0134”)

2.1

(.083”)

3.4

(.0134”)

2.1

(.083”)

3.4

(.0134”)

2.1

Front

Rear

Front

Rear

Front

Rear

Front

Rear

Front

Rear

25.0

12.5

3.0

1.5

(.984”)

(.492”)

(.118”)

(.059”)

33.3

(1.311”)

16.7

(.657”)

3.0

(.118”)

1.5

(.059”)

47.0

(1.850”)

23.5

(.925”)

3.0

(.118”)

1.5

(.059”)

63.5

(2.500”)

31.7

(1.248”)

3.0

(.118”)

1.5

(.059”)

(2.295”)

56.3

(2.217”)

(1.150”)

28.2

(1.110”)

(.622”)

14.1

(.555”)

(.311”)

7.1

(.280”)

(.083”)

3.4

(.0134”)

61.1

(2.406”)

30.6

(1.205”)

3.0

(.118”)

1.5

(.059”)

Straight connector footprint

Signal tail 0.6 mm Dia. (.0236”)

1.6 mm (.063”)PCB

For other PCB thickness: consult factory.

Dimensions

Description

4.80 mm

(.198”)

7.2 mm

(.283”)

Power (.126” tail dia.)

Power (.0787” tail dia.)

Shielded

4.80 mm

(.198”)

7.2 mm

(.283”)

4.00 mm

(.157”)

7.2 mm

(.283”)

5.00 mm

(.196”)

11.50 mm

(.453”)

Signal

Straight contact combinations

Arrangement with signal contacts

Arrangement without signal contacts

3W3 - 5W5 - 8W8

See above dimensions

Size 8 and 20 Contacts

See above dimensions

Size 8 Contacts

Power only

3.2 mm DIA. (.126”)

(20 to 40 A)

Power 3.2 mm DIA. (.126”)

(20 to 40 A) and signal

P 3SY

P 2SY

P 3Y

Power 2 mm DIA. (.0787”)

(10 to 20 A) and signal

Power only

P 2Y

2 mm DIA. (.0787”)

(10 to 20 A)

CSY

Shielded and signal

Signal only

Shielded only

Signal (Size 20)

No reference

with solder cup terminations

Housing preloaded with contacts

Right angle connector footprint

Signal tail 0.6 mm Dia. (.0236”)

1.6 mm (.063”) PCB

For other PCB thickness: consult factory.

Europe

Mix

MIL

HE 5 pattern =

- Europ. height

- Europ. footprint

pitch between

Mixed pattern =

- MIL height

MIL pattern =

- MIL height

- MIL footprint

pitch between

- Europ. footprint

pitch between

2 rows: .100”

2 rows: .112”

Description

10.30mm 6.30mm 10.00mm 10.30mm 6.30mm 10.00mm

(.406”) (.248”) (.394”) (.406”) (.248”) (.394”)

Shielded

10.30mm 7.20mm 11.20mm 10.30mm 6.30mm 9.50mm 8.10mm 6.30mm 9.50mm

(.406”) (.283”) (.441”) (.406”) (.248”) (.374”) (.319”) (.248”) (.374”)

Signal

11.57mm 7.20mm 10.50mm 11.57mm 6.30mm 9.50mm 9.52mm 6.30mm 9.50mm

(.456”) (.283”) (.413”) (.456”) (.248”) (.374”) (.375”) (.248”) (.374”)

Power (.0787” tail dia.)

Power (.126” tail dia.)

21.46mm 7.20mm 10.50mm 21.46mm 6.30mm 9.50mm 21.46mm 6.30mm 9.50mm

(.845”) (.283”) (.413”) (.845”) (.248”) (.374”) (.845”) (.248”) (.374”)

Note: above dimensions correpond to sizes E to C. Consult factory for D sizes.

Connector comes equiped with contacts and brackets.

Right angle contacts combinations

Arrangement with signal contacts

Arrangement without signal contacts

3W3 - 5W5 - 8W8

European

footprint

Mixed

footprint

MIL (U.S.)

footprint

Size 8 and

20 Contacts

European

footprint

Mixed

footprint

MIL (U.S.)

footprint

Size 8 contacts

only

Power 3.2 mm

DIA. (.126”) (20 to

40 A) and signal

Power only

3.2 mm DIA. (.126”)

(20 to 40 A)

EP3SV

EP2SV

HP3SV

HP2SV

MP3SV

MP2SV

EP3V

HP3V

MP3V

Power 2 mm

DIA. (.0787”) (10 to

20 A) and signal

Power only

2.0 mm DIA. (.0787”)

(10 to 20 A)

EP2V

HP2V

HCV

MP2V

MCV

HCSV

HSV

MCSV

MSV

Shielded and signal

Signal only

Shielded only

ESV

Mounting options

Right angle version

Connectors come equiped with metal brackets

BLANK: 3.10mm (.122”) dia mounting hole

RM6: metal brackets + boardlock

Metal bracket

RM6

Straight version

BLANK: 3.10mm (.122”) dia mounting hole

RM54: RM5 4.40 threaded

RM53: RM5 M3 threaded

7.2 (.283)

RM5

RM8

RM84: RM8 4.40 threaded

RM83: RM8 M3 threaded

A514: blind mating system

FM: float mounting system

3.5

(.137)

ø2.2 (.086)

3.6 max.

(.141 max.)

19.9

(.783)

Straight and right angle version

4R: 4.40 rear nut

3R: M3 rear nut

4F: 4.40 front female screwlock

3F: M3 front female screwlock

High power contacts

Solder cup version

(.866”)

øA

øB

P/N

Dimensions

Current

Plug

Socket

A mm (inch)

B mm (inch)

2.55 (.100”)

3.70 (.145”)

5.60 (.220”)

L 17DM 53745-8

L 17DM 53745-7

L 17DM 53745-1

L 17DM 53744-7

L 17DM 53744-6

L 17DM 53744-1

10 to 20 Amp.

20 to 30 Amp.

30 to 40 Amp.

1.80 (.071”)

2.80 (.110”)

4.80 (.189”)

Trim dimensions: 7.5 mm (.295”)

Crimp version

øB

(.866”)

øA

P/N

Dimensions

Current

Plug

Socket

A mm (inch)

1.80 (.071”)

2.80 (.110”)

4.80 (.189”)

B mm (inch)

2.55 (.100”)

3.70 (.145”)

5.60 (.220”)

L 17DM 53745-208

L 17DM 53745-207

L 17DM 53744-207

L 17DM 53744-206

L 17DM 53744-201

10 to 20 Amp.

20 to 30 Amp.

30 to 40 Amp.

L 17DM 53745-201

Trim dimensions: 7.5 mm (.295”)

Crimping tool for all sizes

L17D479SP

Extraction tool for sizes 8 cts

Straight shielded contacts

Crimp ferrule and inner solder

øD

Type

P/N

Dimensions (inch)

Cable - RG

Trim dimensions (inch)

A Max

plug

L17DM 53740 18.8 (740”) 23.6 (.929”) 1.0 (.039”)

178 B/U

7.9 (.311”) 6.3 (.248”) 2 (.078”)

L17DM 53740-1 18.8 (740”) 23.6 (.929”) 1.7 (.066”) 179 B/U 316 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

L17DM 53740-3 21.5 (846”) 23.6 (.929”) 2.8 (.110”)

L17DM 53740-5 21.5 (846”) 23.6 (.929”) 3.2 (.126”)

180 B/U

58 C/U

9.5 (.374”) 7.9 (.311”) 2 (.078”)

7.9 (.311”) 6.3 (.248”) 2 (.078”)

socket L17DM 53742 18.8 (740”) 23.6 (.929”) 1.0 (.039”)

178 B/U

socket L17DM 53742-1 18.8 (740”) 23.6 (.929”) 1.7 (.066”) 179 B/U 316 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

socket L17DM 53742-3 21.5 (846”) 23.6 (.929”) 2.8 (.110”)

socket L17DM 53742-5 21.5 (846”) 23.6 (.929”) 3.2 (.126”)

180 B/U

58 C/U

9.5 (.374”) 7.9 (.311”) 2 (.078”)

Ferrule and inner solder

øD

Type

P/N

Dimensions (inch)

Cable - RG Trim dimensions (inch)

A Max

short plug L17DM 53740-5000 17.0 (669”) 21.8 (.858”) 1.0 (.039”)

plug L17DM 53740-5001 18.8 (740”) 23.6 (.929”) 1.7 (.066”) 179 B/U 316 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

178 B/U

7.9 (.311”) 6.3 (.248”) 2 (.078”)

plug L17DM 53740-5002 21.5 (846”) 26.3 (1.035”) 2.8 (.110”)

plug L17DM 53740-5005 21.5 (846”) 26.3 (1.035”) 3.2 (.126”)

plug L17DM 53740-5008 18.8 (740”) 23.6 (.929”) 1.0 (.039”)

short socket L17DM 53742-5000 17.0 (669”) 21.8 (.858”) 1.0 (.039”)

180 B/U

58 C/U

9.5 (.374”) 7.9 (.311”) 2 (.078”)

7.9 (.311”) 6.3 (.248”) 2 (.078”)

178 B/U

socket L17DM 53742-5001 18.8 (740”) 23.6 (.929”) 1.7 (.066”) 179 B/U 316 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

socket L17DM 53742-5002 21.5 (846”) 26.3 (1.035”) 2.8 (.110”)

socket L17DM 53742-5004 21.5 (846”) 26.3 (1.035”) 3.2 (.126”)

socket L17DM 53742-50060 18.8 (740”) 23.6 (.929”) 1.0 (.039”)

180 B/U

58 C/U

9.5 (.374”) 7.9 (.311”) 2 (.078”)

7.9 (.311”) 6.3 (.248”) 2 (.078”)

178 B/U

Right angled shielded contact

Crimp ferrule and inner solder

Type

P/N

Dimensions (inch)

A Max

L17DM 53741 13.5 (.531”) 18.6 (.732”) 1.0 (.039”)

Cable - RG

Trim dimensions (inch)

plug

178 B/U

9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

plug L17DM 53741-1 13.5 (.531”) 18.6 (.732”) 1.7 (.066”) 179 B/U 316 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

plug L17DM 53741-3 13.5 (.531”) 18.6 (.732”) 2.8 (.110”)

plug L17DM 53741-4 13.5 (.531”) 18.6 (.732”) 3.2 (.126”)

socket L17DM 53743-2 13.5 (.531”) 18.6 (.732”) 1.0 (.039”)

180 B/U

58 C/U

10.7 (.421”) 7.9 (.311”) 2.4 (.094”)

9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

178 B/U

socket L17DM 53743-3 13.5 (.531”) 18.6 (.732”) 1.7 (.066”) 179 B/U 316 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

socket L17DM 53743-5 13.5 (.531”) 18.6 (.732”) 2.8 (.110”)

socket L17DM 53743-6 13.5 (.531”) 18.6 (.732”) 3.2 (.126”)

180 B/U

58 C/U

10.7 (.421”) 7.9 (.311”) 2.4 (.094”)

Ferrule and inner solder

øD

Type

P/N

Dimensions (inch)

Trim dimensions (inch)

A Max

Cable - RG

plug L17DM 53741-5000 13.5 (.531”) 18.6 (.732”) 1.0 (.039”)

178 B/U

9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

plug L17DM 53741-5001 13.5 (.531”) 18.6 (.732”) 1.7 (.066”) 179 B/U 316 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

plug L17DM 53741-5003 13.5 (.531”) 18.6 (.732”) 2.8 (.110”)

plug L17DM 53741-5004 13.5 (.531”) 18.6 (.732”) 3.2 (.126”)

socket L17DM 53743-5000 13.5 (.531”) 18.6 (.732”) 1.0 (.039”)

180 B/U

58 C/U

10.7 (.421”) 7.9 (.311”) 2.4 (.094”)

9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

178 B/U

socket L17DM 53743-5001 13.5 (.531”) 18.6 (.732”) 1.7 (.066”) 179 B/U 316 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

socket L17DM 53743-5003 13.5 (.531”) 18.6 (.732”) 2.8 (.110”)

socket L17DM 53743-5004 13.5 (.531”) 18.6 (.732”) 3.2 (.126”)

180 B/U

58 C/U

10.7 (.421”) 7.9 (.311”) 2.4 (.094”)

Crimping tool

Hand crimp tool

227-0944 (without dies) (M 22 520/5-01)

RG cables

MIL reference

Amphenol P/N

dim. between 2 flat surface

cavity A

cavity B

RG 58 C/U

RG 178 B/U

RG 179 B/U

RG 180 B/U

M 22 520/5-05

M 22 520/5-03

M 22 520/5-05

227 1221-05

227 1221-03

227 1221-05

5.41

3.25

2.67

4.52

Extraction tool

Extraction tool for sizes 8 cts

L17D429SP

Cabling instructions for shielded contacts

Straight crimp shielded contacts:

inner solder contact

outer crimp contact

soft solder

outer ring

coaxial shell

3.20

outer ring

braided shield

inner sleeve

crimp

Right angle crimp shielded contacts:

inner solder contact

outer crimp contact

inner sleeve

outer ring

coaxial shell

outer ring

crimp

3.20

soft solder cap into shell after cable

assembly on 90˚ type coaxes

soft solder

Assembly method

- Slide the outer ring over the cable jacket. Trim the cable

according to the recommended dimensions.

- Insert the cable dielectric and the center conductor inside

the inner sleeve.

- Slide the outer ring towards the inner sleeve ans recover

the braid.

- Using crimp hand tool equipped with the appropriate dies,

crimp in the area defined.

- Solder the central conductor to the shielded center

contacts.

Solder straight shielded contacts:

soft solder

outer ring

coaxial shell

outer ring

solder

braided shield

inner sleeve

Solder right angle shielded contacts:

coaxial shell

outer ring

inner sleeve

outer ring

solder

soft solder cap into shell after cable

assembly on 90˚ type coaxes

soft solder

Assembly method

- Slide the outer ring over the cable jacket. Trim the cable

according to the recommended dimensions.

- Insert the cable dielectric and the center conductor inside

the inner sleeve.

- Slide the outer ring towards the inner sleeve ans recover

the braid.

- Solder by introducing metal through the outer ring hole.

- Solder the central conductor to the shielded center

contacts.

How to build your part number

... TW... ... ... ... ... ...

RoHS Compliant

Special Deviations

Please consult factory

Contacts and Shell

Contact Plating

Shell

Tinned Tinned & Indents; Plug only

Board Mounting Options

For Straight

0.4µm(16µ”) Au

0.76µm(30µ”) Au

717

777

177

Blank: .120”(3.05mm) Clear Hole

RM53: M3 Threaded (panel side)

standoff with boarlock

RM54: 4-40UNC Threaded (panel side)

standoff with boardlock

Shell size and Configuration:

E5W1, A3W3, A7W2, A11W1, B5W5, B9W4, B13W3,

B17W2, B21W1, C8W8, C13W6, C17W5, C21WA4

C25W3, C27W2, D24W7, D36W4, D43W2

RM84: Non-Removable M3 screwlock,

with standoff and boardlock

For Right Angle

Gender:

P: Pin

RM6: Metal bracket with boardlocks

S: Socket

Contacts:

For straight

BLANK: Solder-cup signal contacts only

P3SY: 20-40 Amp power & signal mix

P2SY: 10-20 Amp power & signal mix

CSY: Coax & signal mix

Panel Mounting Options

For right angle & cable mount

Blank: .120”(3.05mm) Clear Hole

3F: M3 Front Screwlock

3R: M3 Rear Threaded Insert

4F: #4-40 Front Screwlock

4R: #4-40 Threaded Rear Insert

FM: Float mount system

A514: Blind Mate Guide Pin

SY: Signal only

P3Y: 20-40 Amp power only (3W3, 5W5, 8W8)

P2Y: 10-20 Amp power only (3W3, 5W5, 8W8)

CY: Coax only (3W3, 5W5, 8W8)

For right angle

MP3SV: US Footprint, 20-40 Amp power & signal mix

MP2SV: US Footprint, 10-20 Amp power & signal mix

MCSV: US Footprint, Coax & signal mix

MSV: US Footprint, Signal only

MP3V: US Footprint, 20-40 Amp power only (3W3, 5W5, 8W8)

MP2V: US Footprint, 10-20 Amp power only (3W3, 5W5, 8W8)

MCV: US Footprint, Coax only (3W3, 5W5, 8W8)

EP3SV: European Footprint, 20-40 Amp power & signal mix

EP2SV: European Footprint, 10-20 Amp power & signal mix

ESV: European Footprint, Signal only

EP3V: European Footprint, 20-40 Amp power only (3W3, 5W5, 8W8)

EP2V: European Footprint, 10-20 Amp power only (3W3, 5W5, 8W8)

HP3SV: Mixed Footprint, 20-40 Amp power & signal mix

HP2SV: Mixed Footprint, 10-20 Amp power & signal mix

HCSV: Mixed Footprint, Coax & signal mix

HSV: Mixed Footprint, Signal only

HP3V: Mixed Footprint, 20-40 Amp power only (3W3, 5W5, 8W8)

HP2V: Mixed Footprint, 10-20 Amp power only (3W3, 5W5, 8W8)

HCV: Mixed Footprint, Coax only (3W3, 5W5, 8W8)

SM2

D-Sub connectors - Stamped and Formed Contacts

SURFACE MOUNT CONNECTORS

Amphenol SMT D-Sub is offered in

right angle, receptacle with brackets,

as an industry standard for I / O

connections.

Specifications

• Connectors according to MIL C24308 - NFC 93425-HE5

Materials and Platings

Shells

Steel with tin plating

Boardlock features:

Insulator

High temperature (peak at 260°C) glass-filled

thermoplastic, UL 94V-0

-LIF (Low Insertion Force) boardlock

especially designed to be fully

compatible with pick and place

machine.

-ZeFo (Zero Force Insertion) boardlock

has been designed so that once placed

and expanded, secures a safe locking.

Socket contact Stamped and formed brass, selected gold in mating area;

2.54µm (100µ”) min. tin on termination area, with entire

contact under-plated 1.27µm (50µ”) min. nickel

Rear insert

Brass, 3µm up to 5µm (118µ” up to 197µ”) tinned over

nickel 2µm up to 3 µm (78µ” to 118µ”)

Boardlock

Tin plating 4µm up to 6µm (157µ” up to 236µ”) over nickel

2µm up to 3µm (78µ” up to 118µ”), insertion force:

Low Insertion Force = LIF (bronze)

Zero Insertion Force = ZeFo (bronze)

Designed for

Pick and Place

SMT process

Screwlock

Grounding

Brass, 6µm up to 10µm (236µ” up to 394µ”) tinned over

nickel 2µm up to 3µm (78µ” up to 118µ”)

Grounding strap: brass, 4µm up to 6µm tin plating over

nickel 2µm up to 3µm (78µ” up to 118µ”)

Electrical Data

Current rating

Voltage rating

300V AC/rms 50Hz

Withstanding voltage

Insulation resistance

Contact resistance

1000V AC/rms 50Hz for one minute

5000MΩ

10mΩ max

• Industrial

• Telecom

Climatic Data

Operating temperature 85°C, peak at 105°C

• Any industry standard

Damp heat

56 days (40°C - 95% HR)

I / O connections

Mechanical Data

Single contact insertion force

Single contact withdrawal force

LIF boardlock

1.2N < F < 2.5N

0.4N min

8N max per connector

0.2mm (.008”) max

Coplanarity of contacts

Mating and unmating force

Unit: N

No. of Cts

Mate (max)

Unmate (min)

9 (size E)

15 (size A)

25 (size B)

3.5

4.5

8.0

Shell Size Dimensions

PCB LAYOUT

mm (inch)

SHELL

SIZE

PITCH

+0.05 (.002)

±0.1 (.004)

-0.1 (.004)

-0.2 (.008)

-0.25 (.01)

31.15 (1.226) 16.4 (.645)

25 (.984)

8.03 (.316) 2.74 (.1078) 10.97 (.432) 16.3 (.642)

24.6 (.968)

8.03 (.316) 2.76 (.1086) 33.12 (1.304) 38.3 (1.508)

39.4 (1.551) 24.8 (.976) 33.3 (1.311) 8.03 (.316) 2.74 (.1078) 19.2 (.756)

53.3 (2.098) 38.5 (1.515) 47 (1.850)

Panel mounting option

GROUNDING TABS:

BOARDLOCKS:

FLANGES ACCESSORIES:

How to order

L 17 SM2 ... S ... ... ... ...

RoHS Compliant

packaging:

R = reel (100 / reel, 9 Pos only)

T = tube

configuration:

contact plating:

1 = 0.2µm Au (7.9µ”)

2 = 0.4µm Au (15.7µ”)

3 = 0.5µm Au (19.7µ”)

4 = 0.8µm Au (31.5µ”)

6 = 1.27µm Au (50µ”)

board locks / grounding tab:

1 = V1 grounding tab +ZeFo

boardlocks (PCB = 1.6)

4 = ZeFo boardlocks only

(PCB = 1.6)

7 = V1 grounding tab only

8 = no grounding tab and no

boardlocks

mounting options:

1 = rear insert 4-40

2 = rear insert M3

5 = installed front screwlock

4-40

B = V2 grounding tab + LIF

boardlocks (PCB = 1.6)

6 = fixed front screwlock 4-40

: Standard options

For special request, please consult factory

Memo

Do not hesitate to contact us for further information

Amphenol IT & Communication Products

Block A3/A4, The 4th Industrial District of

Industrial Headquarters, Dong Keng Road

Gong Ming Town, Shen Zhen China

Fax:+86(0)755 2754 9955

Technical Support

Tel:+86(0)755 2717 7945

Info-dsub@amphenol.com.cn

http://www.dsubconnector.com

D-ST

Screw Termination D’Sub series

• Connectors according to: MIL C24308 - NFC 93425-HE5

Materials and platings

Shells

Steel, Tin plated

Insulator

Contacts

Glass filled thermoplastic, UL 94V-0

Machined brass for plug full gold

Machined bronze for socket, full gold

Electrical Data

Current rating

7,5 A max

Voltage rating

300 V RMS at 50 Hz

1000 V RMS at 50 Hz

> 5000 MΩ at 500 V DC

< 5 mΩ

Withstanding voltage

Insulation resistance

Contact resistance

Climatic Data

Simplify

Your cable

assemblies!

Operating temperature

Damp heat

Salt spray

- 55°C to + 85°C, peak at 125°C

21 days (40°C - 95% HR)

48 hours

Mechanical Data

Cable type

Cable gage

Solid or stranded

0.75 mm max ( AWG 18 ) - For

bigger wire, please consult factory

0.05 mN max

Screw torque

Mating cycles

100 (class II) or 500 (class I)

10°

+0.1

- 0.2

9,7

(.382”)

11,6 REF

(.457”)

13 REF

(.512”)

Ø1,45

(.057”)

Cable stripping

3 mm

(.118”)

+0,25 (,010”)

+0,2 (,008”) +0.1 (,004”) +0.1 (,004”)

SIZE

-0.25 (,010”) -0,2 (,008”)

-0.1 (,004”)

-0,4 (,016”)

30.7

(1.209”)

16.4

(.646”)

16.8

(.661”)

(.984”)

19.4

(.370”)

(1.535”)

24.8

(.976”)

25.1

(.988”)

33.3

(1.311”)

27.7

(1.091”)

52.9

(2.083”)

38.5

(1.516”)

38.8

(1.528”)

(1.850”)

41.4

(1.630”)

69.2

(2.724”)

54.9

(2.161”)

55.3

(2.177”)

63.5

(2.500”)

57.9

(2.280”)

How to order

RoHS Compliant

Plastic hoods

Metallic hoods

D-Sub connectors - Stamped and Formed Contacts

PRESS FIT

STRAIGHT PCB TERMINATION

The Amphenol “TF“ series

features eye of needle formed

contacts, and insulator with

closed entry contacts cavities.

Materials and Platings

Shells

Insulator

Pin contact

Steel, tin plated

Glass-filled thermoplastic, UL 94V-0

Brass, selected gold in mating area;

2.54µm (100µ") min. tin

This series gives you

on termination area over

Amphenol's high standards of

quality and reliability to meet

all your technical requirements.

1.27µm (50µ") min.nickel

Socket contact

Phosphor bronze, selected gold in

mating area; 2.54µm (100µ") min.

tin on termination area over;

1.27µm(50µ") min. nickel

Rear insert

Boardlock

Screwlock

Brass, 2.54µm (100µ") min. nickel plated

Electrical Data

Solderless

straight PCB

mount

Current rating

Voltage rating

Withstanding voltage

Insulation resistance

Contact resistance

300V AC

1000V AC/rms 60Hz for one minute

1000MΩ

25mΩ max

connectors

Climatic Data

Operating temperature -55°C to +125°C

Salt spray

24 hours

• Industrial

• Telecom

Mechanical Data

Single contact insertion force

Single contact withdrawal force

Single contact insertion on board

Single contact withdrawal from board

Standard plating thickness

≤ 3.60 N

≥ 0.2 N

≤ 100 N

≥ 20 N

Gold flash

0.4µm (15µ") gold

0.76µm (30µ") gold

• Any backplanes

connections

Terminal

Boardlock

Specification

Finished Hole

1 (+0.09 -0.06)

> 25 µm

3.1 +/- 0.05 mm

Min 25 µm

5-15 µm

< 15 µm

Socket version

2.77

Plug version

2.77

24.99

2.77

Position n1 for plug

Position n1 for socket

For PCB holes diameters, see on page 1 (finished holes)

DIMENSIONS mm (inch)

Nb OF

CONTACTS

C plug

C socket

16.33 (0.643)

24.66 (0.97)

38.38 (1.511)

54.84 (2.16)

30.81 (1.185)

39.14 (1.54)

53.04 (2.088)

69.32 (2.729)

24.99 (0.984)

33.32 (1.312)

47.04 (1.852)

63.50 (2.5)

16.92 (0.666)

25.50 (1.004)

28.96 (1.534)

55.42 (2.182)

Female

Size of connectors

Tooling PN

981 MC

982 MC

983 MC

984 MC

Male

Size of connectors

Tooling PN

985 MC

986 MC

987 MC

988 MC

Board mounting option

Option 0

Option 1

3.10mm (.122”)

Press Fit Boardlock

Flange mounting option

M3 / #4 - 40 UNC

Screwlock

M3 / #4 - 40 UNC

Threaded holes

Option 1 or 4

Option 2 or 5

How to order

L 17TF ... ... ... ... ... ...

RoHS Compliant

Flange mounting option :

1 = #4-40 threaded hole

2 = #4-40 threaded hole with

#4-40 UNC screwlock

installed

Series

4 = M3 threaded hole

5 = M3 threaded hole with

M3 scewlock installed

Number of contacts :

09-15-25-37

Contact type:

1 = pin

0 = socket

Board mounting option

0 = without boardlock

1 = with boardlock

Contact plating

0 = gold flash

1 = 0.4 µm (15µ”)

2 = 0.76 µm (30µ”)

Front shell plating

1 = tin over nickel

Do not hesitate to contact us for further information

Amphenol IT & Communication Products

Block A3/A4, The 4th Industrial District of

Industrial Headquarters, Dong Keng Road

Gong Ming Town, Shen Zhen China

Fax:+86(0)755 2754 9955

Technical Support

Tel:+86(0)755 2717 7945

Info-dsub@amphenol.com.cn

http://www.dsubconnector.com

D'Sub connectors - Stamped and Formed Contacts

SOLDER-CUP TERMINATION

STANDARD and HIGH DENSITY

The Amphenol "SD" series features

precision formed contacts, and

insulator with closed entry contacts

cavities.

Specifications

• Connectors according to: MIL C24308 - NFC 93425-HE5

Materials and Platings

This series gives you Amphenol's

high standards of quality and reliability

to meet all of your commercial

requirements.

Shells

Insulator

Pin contacts

Steel, tin over nickel plating

Glass-filled thermoplastic, UL 94V-0

Brass, selected gold in mating area;

2.54µm (100µ") min. tin

on termination area over

1.27µm (50µ") min. nickel

Socket contact

Phosphor bronze, selected gold in

mating area; 2.54µm (100µ") min. tin-

on termination area over 1.27µm

(50µ") min. nickel

Rear insert

Screwlock

Brass, 2.54µm (100µ") min. nickel plated

Economical

solder cup

connectors

Electrical Data

Current rating

Standard Density: 5A

High Density: 3A

250V AC/rms 50Hz

1000V AC/rms 50Hz for one minute

1000MΩ at 500V DC

20mΩ max

Voltage rating

Withstanding voltage

Insulation resistance

Contact resistance

Climatic Data

Operating temperature -55°C to +125°C

• Industrial

• Telecom

Salt spray

24 hours

• Any industry standard

I / O connections

Mechanical Data

Single contact insertion force

Single contact withdrawal force

0.54kg (1.19lb) max

SD : 0.06kg (0.13lb) min

HD : 0.02kg (0.044lb) min

Mating and unmating force

Unit: kg ( lb)

No. of Cts

SD HD

Mate (max) Unmate (min) Mate (max) Unmate (min)

3.05 (6.74)

5.09 (11.24)

8.44 (18.66)

0.36 (0.79)

0.46 (1.01)

0.81 (1.8)

1.1 (2.47)

1.6 (3.56)

3.81 (8.42)

5.95 (13.16)

9.26 (20.46)

13.48 (29.78)

15.82 (34.96)

0.52 (1.14)

1.05 (2.32)

1.37 (3.02)

1.76 (3.88)

2.02 (4.46)

62 12.51 (27.65)

78 14.65 (32.38)

Standard plating thickness

• gold flash

• 0.4µm (15µ") gold

• 0.76 µm (30µ") gold

Standard Density

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

E±0.05 (.002)

POSITION #1

10°

Ø3.05 (.120 dia)

SOCKET

PLUG

F±0.13 (.005)

10.72 (.422)

DIMENSIONS mm (inch)

Nb OF

CONTACTS

30.84 (1.21)

39.24 (1.54)

53.04 (2.09)

69.32 (2.73)

67 (2.64)

24.99 (.98)

16.92 (.67)

24.7 (.972)

38.96 (1.53)

55.42 (2.18)

52.86 (2.08)

16.24 (.64)

24.56 (.97)

38.38 (1.51)

54.76 (2.16)

52.34 (2.06)

11.09 (.44)

19.39 (.76)

33.24 (1.31)

49.86 (1.96)

44.32 (1.75)

19.28 (.76)

27.51 (1.08)

41.30 (1.63)

57.71 (2.27)

55.3 (2.18)

2.74

2.77

33.32 (1.31)

47.04 (1.85)

63.50 (2.50)

61.11 (2.41)

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

E±0.13 (.005)

POSITION #1

10°

Ø3.05 (.120 dia)

PLUG

SOCKET

F±0.38 (.015)

13.56 (.534)

High Density

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

POSITION #1

Ø3.05 (.120)

2.29±0.05 (.09±0.002)

10°

PLUG

SOCKET

E±0.13 (.005)

10.72 (.422)

DIMENSIONS mm (inch)

Nb OF

CONTACTS

30.84 (1.21)

24.99 (.98)

16.92 (.67)

16.24 (.64)

19.28 (.76)

39.24 (1.54) 33.32 (1.31)

24.7 (.972)

24.56 (.97)

27.51 (1.08)

53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 41.30 (1.63)

69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 57.71 (2.27)

67 (2.64)

61.11 (2.41) 52.86 (2.08) 52.34 (2.06)

55.3 (2.18)

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

45.79±0.13 (1.803±0.005)

POSITION #1

Ø3.05 (.120)

10°

2.41 (.95)

PLUG

SOCKET

E±0.38 (.015)

33.56 (.534)

78 CONTACTS

Panel mounting option

M3 or #4-40 screwlock

M3 or #4-40

5.8 (.228)

6.0 (.236)

Front Female Screwlock

VF / VFM

Threaded Rear Insert

H / G

How to order

L ... ... ... ... ... ... ...C309

RoHS Compliant

plating option:

valid only for

0.76µm (30µ")

77: tinned shell

for receptable

717: tinned shell

+ dimples

gold

flash

part numbers to be written

as follow:

77...................C309

for plug

717.................C309

177: tinned shell

for receptable

777: tinned shell

+ dimples

0.4µm

(15µ")

front mounting type:

no digit = standard rivet

3.05mm

VF = front screwlock 4-40

VFM = front screwlock M3

for plug

SD : standard density

HD : high density

contact type:

P = pin

S = socket

shell size: E, A, B, C, D

configuration:

SD : 9,15,25,37,50

HD : 15,26,44,62,78

rear mounting type:

H = rear insert 4-40

G = rear insert M3

For special request, please consult factory

Do not hesitate to contact us for further information

Amphenol IT & Communication Products

Block A3/A4, The 4th Industrial District of

Industrial Headquarters, Dong Keng Road

Gong Ming Town, Shen Zhen China

Fax:+86(0)755 2754 9955

Technical Support

Tel:+86(0)755 2717 7945

Info-dsub@amphenol.com.cn

http://www.dsubconnector.com

D'Sub connectors - Stamped and Formed Contacts

STRAIGHT PCB TERMINATION

STANDARD and HIGH DENSITY

The Amphenol "SD"

series features precision

formed contacts, and

insulator with closed

entry contacts cavities.

This series gives you

Amphenol's high

standards of quality and

reliability to meet all of

your commercial

Specifications

• Connectors according to: MIL C24308 - NFC 93425-HE5

Materials and Platings

Shells

Insulator

Pin contacts

Steel, tin over nickel plating

Glass-filled thermoplastic, UL 94V- 0

Brass, selected gold in mating area;

2.54µm (100 µ") min.tin on

termination area over 1.27µm

(50µ") min.nickel

Socket contact

Phosphor bronze, selected gold in

mating area;2.54µ(100µ") min.tin

on termination area over 1.27µm

(50µ") min.nickel

requirements.

Rear insert

Boardlock

Screwlock

Brass, 2.54µm (100µ") min.nickel plated

(removable)

Economical

straight PCB

mount connectors

Electrical Data

Current rating

Standard Density:5A

High Density:3A

250V AC/ rms 50Hz

1000V AC/rms 50Hz for one minute

1000MΩ at 500V DC

20mΩ max

Voltage rating

Withstanding voltage

Insulation resistance

Contact resistance

Climatic Data

Operating temperature -55°C to +125°C

• Industrial

Salt spray

24 hours

• Telecom

Mechanical Data

• Any industry standard

I / O connections

Single contact insertion force

Single contact withdrawal force

0.54kg (1.19lb) max

SD : 0.06kg (0.13lb) min

HD : 0.02kg (0.044lb) min

Mating and unmating force

Unit: kg ( lb)

No. of Cts

SD HD

Mate (max) Unmate (min) Mate (max) Unmate (min)

3.05 (6.74)

5.09 (11.24)

8.44 (18.66)

0.36 (0.79)

0.46 (1.01)

0.81 (1.8)

1.1 (2.47)

1.6 (3.56)

3.81 (8.42)

5.95 (13.16)

9.26 (20.46)

13.48 (29.78)

15.82 (34.96)

0.52 (1.14)

1.05 (2.32)

1.37 (3.02)

1.76 (3.88)

2.02 (4.46)

62 12.51 (27.65)

78 14.65 (32.38)

Standard plating thickness

• gold flash

• 0.381µm (15µ") gold

• 0.76 µm (30µ") gold

Standard Density

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

E±0.05 (.002)

POSITION #1

12.55±0.38 (.494±0.015)

7.9±0.13 (.311±0.005)

4.4 (.173)

0.4 (.016)

ø 0.62 (.024)

10°

5.9 (.232)

DETAIL A

PLUG

F±0.13 (.005)

* see chart "panel mounting option"

SOCKET

6.1 (.240)

10.72 (.422)

DIMENSIONS mm (inch)

Nb OF

CONTACTS

30.84 (1.21)

39.24 (1.54)

53.04 (2.09)

69.32 (2.73)

67 (2.64)

24.99 (.98)

33.32 (1.31)

47.04 (1.85)

63.50 (2.50)

61.11 (2.41)

16.92 (.67)

24.7 (.972)

38.96 (1.53)

55.42 (2.18)

52.86 (2.08)

16.24 (.64)

24.56 (.97)

38.38 (1.51)

54.76 (2.16)

52.34 (2.06)

11.09 (.44)

19.39 (.76)

33.24 (1.31)

49.86 (1.96)

44.32 (1.75)

19.28 (.76)

2.74

2.77

27.51 (1.08)

41.30 (1.63)

57.71 (2.27)

55.3 (2.18)

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

E±0.13 (.005)

POSITION #1

10°

13.56 (.534)

5.9 (.232)

PLUG

SOCKET

6.1 (.240)

F±0.38 (.015)

50 CONTACTS

High Density

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

POSITION #1

10°

2.29±0.05 (.09±0.002)

PLUG

SOCKET

E±0.13 (.005)

* see chart "panel mounting option"

10.72 (.422)

DIMENSIONS mm (inch)

Nb OF

CONTACTS

30.84 (1.21)

39.24 (1.54)

53.04 (2.09)

69.32 (2.73)

67 (2.64)

24.99 (.98)

33.32 (1.31)

47.04 (1.85)

63.50 (2.50)

61.11 (2.41)

16.92 (.67)

24.7 (.972)

38.96 (1.53)

55.42 (2.18)

52.86 (2.08)

16.24 (.64)

19.28 (.76)

24.56 (.97)

27.51 (1.08)

38.38 (1.51) 41.30 (1.63)

54.76 (2.16) 57.71 (2.27)

52.34 (2.06)

55.3 (2.18)

A±0.38 (.015)

B±0.13 (.005)

45.79±0.13 (1.803±.005)

C±0.13 (.005)

D±0.13 (.005)

POSITION #1

10°

2.41 (.095)

PLUG

SOCKET

E±0.38 (.015)

13.56 (.534)

78 CONTACTS

Panel mounting option

M3 or # 4-40 screwlock

H = # 4-40

G = M3

M3 or # 4-40

H = # 4-40

G = M3

Ｘ

Ｙ

Ｘ

Ｙ

4.8 (.189)

5.9 (.232)

Front Female Screwlock

Threaded Rear Insert

RM5 Standoff Boardlock

RM8 Standoff Boardlock

RM5

RM8

RM5G

RM8G

6.0(.236)

4.2(.165)

6.2(.244)

12.7(.500)

3.2(.126)

10.1(.397)

How to order

L ... ... ... ... ... ... OL2 ...C309

RoHS Compliant

plating option:

valid only for

0.76µm (30µ")

77: tinned shell

for receptable

717: tinned shell

+ dimples

part numbers to be written

as follow:

gold

flash

77...................C309

for plug

717.................C309

177: tinned shell

for receptable

777: tinned shell

+ dimples

grounding tabs:

no digit = standard rivet

3.05mm

RM5 = retention clip

RM8 = retention clip

+ front screwlock

0.4µm

(15µ")

for plug

SD : standard density

HD : high density

Termination

Straight for PCB

shell size: E, A, B, C, D

contact type:

P = pin

S = socket

mounting type:

H = rear insert 4-40

G = rear insert M3

H,G must also be used

to specify the threading

of RM5 or RM8

configuration:

SD : 9,15,25,37,50

HD : 15,26,44,62,78

grounding tabs.

For special request, please consult factory

Do not hesitate to contact us for further information

Amphenol IT & Communication Products

Block A3/A4, The 4th Industrial District of

Industrial Headquarters, Dong Keng Road

Gong Ming Town, Shen Zhen China

Fax:+86(0)755 2754 9955

Technical Support

Tel:+86(0)755 2717 7945

Info-dsub@amphenol.com.cn

http://www.dsubconnector.com

D’Sub connectors - Stamped and Formed Contacts

RIGHT ANGLE

BOARD MOUNT CONNECTORS

The Amphenol “SD” series features

precision formed contacts and

boardlocks.

Specifications

• Connectors according to: MIL C24308 - NFC 93425-HE5

Materials and Platings

This series gives you Amphenol’s high

standards of quality and reliability to

meet all of your commercial

requirements.

Shells

Insulator

Pin contacts

Steel, tin over nickel plating

Glass-filled thermoplastic, UL 94V- 0

Brass, selected gold in mating area;

2.54µm (100 µ") min.tin on

termination area over 1.27µm

(50µ") min.nickel

Socket contact

Phosphor bronze, selected gold in

mating area;2.54µ(100µ") min.tin

on termination area over 1.27µm

(50µ") min.nickel

Rear insert

Boardlock

Brass, 2.54µm (100µ") min.nickel plated

Phosphor bronze or Brass, 2.54µm

(100µ") min.nickel plated

Economical

right angle PCB

mount

Screwlock

Brass, 2.54µm (100µ") min.nickel plated

Electrical Data

Current rating

Voltage rating

Withstanding voltage

Insulation resistance

Contact resistance

250V AC/ rms 50Hz

1000V AC/rms 50Hz for one minute

1000MΩ at 500V DC

15mΩ max

connectors

Climatic Data

Operating temperature -55°C to +125°C

• Industrial

• Telecom

Salt spray

24 hours

• Any industry standard

I / O connections

Mechanical Data

Single contact insertion force

Single contact withdrawal force

0.54kg (1.19lb) max

0.06kg (0.13lb) min

Mating and unmating force

Unit: kg ( lb)

A4 Style

1A Style

No. of Cts

Mate (max) Unmate (min) Mate (max) Unmate (min)

3.05 (6.74)

5.09 (11.24)

8.44 (18.66)

12.51 (27.65)

0.36 (0.79)

0.46 (1.01)

0.81 (1.8)

1.1 (2.47)

4.6 (10.17)

7.7 (17.02)

12.7 (28.07)

17.7 (39.12)

0.4 (0.88)

0.5 (1.10)

0.8 (1.77)

1.2 (2.65)

Standard plating thickness

• gold flash

• 0.381µm (15µ") gold

• 0.76 µm (30µ") gold

A4 style (MIL Footprint)

Nb OF

DIMENSIONS mm (inch)

CONTACTS

30.84 (1.21)

24.99 (.98)

16.92 (.67)

16.24 (.64)

11.09 (.44)

2.74 (.108)

2.77 (.109)

39.14 (1.54) 33.32 (1.31)

25.25 (.99)

24.56 (.97)

19.39 (.76)

53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 33.24 (1.31)

69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 49.86 (1.96)

1A style (European Footprint)

Nb OF

DIMENSIONS mm (inch)

CONTACTS

30.84 (1.21)

24.99 (.98)

16.92 (.67)

16.24 (.64)

11.96 (.43)

2.74 (.108)

2.77 (.109)

39.1 (1.54)

33.32 (1.31)

25.25 (.99)

24.66 (.97)

19.18 (.755)

53.09 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 33.24 (1.31)

69.4 (2.73) 63.50 (2.50) 55.42 (2.18) 54.84 (2.16) 49.86 (1.96)

Panel mounting option

How to order

... SD ... ... ... ... CH ...C309

RoHS Compliant

plating option:

valid only for

0.76µm (30µ")

77: tinned shell

for receptable

717: tinned shell

+ dimples

part numbers to be written

as follow:

gold

flash

77 SD...................C309

for plug

717 SD.................C309

177: tinned shell

for receptable

777: tinned shell

+ dimples

mounting options:

0.4µm

(15µ")

4F = front screwlock 4-40

3F = front screwlock M3

4R = rear insert 4-40

3R = rear insert M3

for plug

shell size: E, A, B, C

PCB locking type:

grounding tabs

+ board locks

configuration: 9, 15, 25, 37

contact type:

P = pin

S = socket

Footprint:

1A (European)

A4 (MIL)

For special request, please consult factory

D-Sub connectors - Stamped and Formed Contacts

RIGHT ANGLE

BOARD MOUNT CONNECTORS

FOOTPRINT 14.99 mm (.590”)

The Amphenol "SD" series features

precision formed contacts and

boardlocks.

Specifications

• UL File: E119881

• Connectors according to MIL C24308

This series gives you Amphenol's high

standards of quality and reliability to

meet all of your commercial

requirements.

Materials and Platings

Shells

Insulator

Pin contacts

Steel, tin over nickel plating

Glass-filled thermoplastic, UL 94V-0

Brass, selected gold in mating area;

2.54µm (100µ") min. tin

on termination area over

1.27µm (50µ") min. nickel

Socket contact

Phosphor bronze, selected gold in

mating area; 2.54µm (100µ") min. tin-

on termination area over 1.27µm

(50µ") min. nickel

Rear insert

Screwlock

Brass, 2.54µm (100µ") min. nickel plated

Economical

right angle PCB

mount connectors

Electrical Data

Current rating

Voltage rating

Withstanding voltage

Insulation resistance

Contact resistance

600V AC/rms 50Hz

1000V AC/rms 50Hz for one minute

5000MΩ

10mΩ max

Climatic Data

• Industrial

• Telecom

Operating temperature -55°C to +125°C

Salt Spray

24 hours

• Any industry standard

I / O connections

Mechanical Data

Mating and unmating force

Unit: kg ( lb)

No. of Cts

Mate (max)

Unmate (min)

9 (size E)

15 (size A)

25 (size B)

37 (size C)

3.05 (6.74)

5.09 (11.24)

8.44 (18.66)

12.51 (27.65)

0.36 (0.79)

0.46 (1.01)

0.81 (1.8)

1.1 (2.47)

Standard plating thickness

• gold flash

• 0.4µm (15µ") gold

• 0.76 µm (30µ") gold

Shi ell Size Dimensions

A±0.38 (.015)

B±0.13 (.005)

C±0.25 (.01)

D±0.25 (.01)

POSITION #1

0.64*0.64 (.025*.025)

10°

12.55 (.494)

3.18 (.125)

Recommended P.C.B.Layout

E±0.13 (.005)

1.385 (.054)

B±0.13 (.005)

DIMENSIONS mm (inch)

Nb OF

CONTACTS

30.84 (1.214) 24.99 (.984)

16.92 (.666)

16.26 (.640)

24.56 (.967)

11.08 (.436)

19.39 (.763)

2.74

2.77

39.24 (1.545) 33.32 (1.312) 25.25 (.994)

53.04 (2.088) 47.04 (1.852) 38.96 (1.534) 38.30 (1.508) 33.24 (1.309)

69.34 (2.730) 63.50 (2.500) 55.42 (2.182) 54.76 (2.156) 49.86 (1.963)

Panel mounting option

#4-40 or M3

Front Female Screwlock

4F/3F

Threaded Rear Insert

4R/3R

How to order

L ... SD ... ... ... AB CH ...C309

RoHS Compliant

77: tinned shell

plating option:

valid only for

0.76µm (30µ")

for receptable

717: tinned shell

+ dimples

gold

flash

part numbers to be written

as follow:

for plug

77SD...................C309

717SD.................C309

177: tinned shell

for receptable

777: tinned shell

+ dimples

0.4µm

(15µ")

mounting options:

for plug

4F = front screwlock 4-40

3F = front screwlock M3

4R = rear insert 4-40

3R = rear insert M3

shell size: E, A, B, C

configuration: 09, 15, 25, 37

PCB locking type:

grounding tabs + boardlocks

contact type:

P = pin

S = socket

footprint:14.99 mm (.590”)

For special request, please consult factory

D-Sub connectors - Stamped and Formed Contacts

STRAIGHT PCB TERMINATION

ONE METAL SHELL CONNECTORS

The one shell D-sub Amphenol series

features, stamped and formed contacts.

Specifications

• Connectors according to MIL C24308

This series gives you Amphenol’s high

standards of quality and reliability

to meet all of your commercial

requirements

Materials and Platings

Shells

Steel, tin over nickel plating

Glass-filled thermoplastic, UL 94V-0

Copper alloy, with selective gold plating

Brass with nickel plating

Insulator

Contacts

Boardlock

Screwlock

Brass with nickel plating

Electrical Data

Current rating

Voltage rating

600V AC/rms 50Hz

1000V AC/rms 50Hz for one minute

5000MΩ

Economical

straight PCB,

one shell

Withstanding voltage

Insulation resistance

Contact resistance

10mΩ max

Climatic Data

connectors

Operating temperature -55°C to +125°C

Mechanical Data

Mating and unmating force

Unit: kg ( lb)

• Industrial

• Telecom

• Any industry standard

I / O connections

No. of Cts

Mate (max)

Unmate (min)

3.05 (6.74)

5.09 (11.24)

8.44 (18.66)

12.51 (27.65)

0.36 (0.79)

0.46 (1.01)

0.81 (1.8)

1.1 (2.47)

Standard plating thicknesses

• gold flash

• 0.4µm (15µ") gold

• 0.76 µm (30µ") gold

Shell Size Dimensions

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

POSITION #1

10°

4.8 (.189)

PLUG

SOCKET

7.7 (.303)

0.8 (.031)

*see chart "how to order"

RECOMMENDED P.C.B. LAYOUT

ø3.2 (.126)

ø1.0 (.039)

1.385 (.055)

DIMENSIONS mm (inch)

Nb OF

CONTACTS

30.84 (1.21)

39.24 (1.54)

53.04 (2.09)

69.34 (2.73)

24.99 (.984)

33.32 (1.31)

47.04 (1.85)

63.50 (2.50)

16.92 (.666)

25.25 (.994)

38.96 (1.53)

55.42 (2.18)

16.26 (.640)

24.56 (.967)

38.30 (1.51)

54.76 (2.16)

11.08 (.436)

19.39 (.763)

33.24 (1.31)

49.86 (1.96)

2.74

2.77

Panel mounting option

#4-40 or M3

ø3.25 (.128)

Boardlock with Threaded Insert

RM5

Boardlock with Front Screwlock

RM8

ø3.05 (120”)

Rear Insert

M3 or #4-40

Clear Hole

Rear Insert Threaded

How to order

L ... TS ... ... ... ... ... ... C309

RoHS Compliant

77: tinned shell

plating option:

valid only for

0.76µm (30µ")

for receptable

717: tinned shell

+ dimples

part numbers to be written

as follow:

gold

flash

77...................C309

for plug

717.................C309

177: tinned shell

for receptable

777: tinned shell

+ dimples

0.4µm

(15µ")

board mounting options:

Blank = Clear Hole

RM5 = retention clip

RM8 = retention clip

+front screwlock

for plug

shell size: E, A, B, C

mounting options:

Blank = Clear Hole

G = M3

termination:

OL2 : L = 6.02mm (.237”)

OL2C : L = 11.48mm (.452”)

H = 4.40

H,G must also be used to specify

the threading of RM5 or RM8

grounding tabs

contact type:

P = pin

S = socket

configuration: 09, 15, 25, 37

For special request, please consult factory

RR-HR

D-Sub connectors - Stamped and Formed Contacts

REAR RELEASE

CRIMP CONNECTORS

Designed for high volume

production, Amphenol's rear

release crimp connector and

contacts provide significant cost

saving.

Specifications

• Connectors according to MIL C24308

Materials and Platings

Shells

Tinned steel with or without dimples

on plug connector

- EMI / RFI shell configuration.

- Removable, reusable contacts.

- Automatic and manual tooling

available.

Insulator

Boardlock

Black glass-filled thermoplastic, UL 94V-0

Brass, 3µm to 5µm (118µ" to 197µ")

tin over nickel 2µm to 3µm

(78µ" to 118µ")

Screwlock

Brass, 6µm to 10µm (236µ" to 394µ")

tin over nickel 2µm to 3µm

(78µ" to 118µ")

Contacts

Under plating

2µm (78µ") nickel

Crimp side

0.2µm (8µ") gold

0.5µm (20µ") gold

0.76µm (30µ") gold

gold flash or tin

Simplify

your cable

assemblies

Electrical Data

Current rating

Voltage rating

500V AC/rms 50Hz

Withstanding voltage

RR: 1000V AC/rms 50Hz for 1 minute

HR: 1000V AC/rms 60Hz for 1 minute

RR: 5000MΩ

Insulation resistance

HR: 1000MΩ

10mΩ max

20-28 AWG max insulation

Ø1.27mm (.05")

• Commercial

• Industrial

• Telecom

Contact resistance

Wire size

• Any industry standard

I / O connections

Climatic Data

Operating temperature -55°C to +125°C

Mechanical Data

Mating and unmating force

Unit: kg ( lb)

No. of Cts

Mate (max)

Unmate (min)

RR HR

9 (size E) 15 (size E) 3.05 (6.74) 3.81 (8.42) 0.36 (0.79) 0.52 (1.14)

15 (size A) 26 (size A) 5.09 (11.24) 5.95 (13.16) 0.46 (1.01) 1.05 (2.32)

25 (size B) 44 (size B) 8.44 (18.66) 9.26 (20.46) 0.81 (1.8) 1.37 (3.02)

37 (size C) 62 (size C) 12.51 (27.65) 13.48 (29.78) 1.1 (2.47) 1.76 (3.88)

50 (size D) 78 (size D) 14.65 (32.38) 15.82 (34.96) 1.6 (3.56) 2.02 (4.46)

Standard density RR

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

E±0.05 (.002)

POSITION #1

10°

ø3.05 (.120)

PLUG

SOCKET

10.72 (.422)

numbered cavities

F±0.13 (.005)

DIMENSIONS mm (inch)

Nb OF

CONTACTS

30.84 (1.21) 24.99 (.98)

39.24 (1.54) 33.32 (1.31)

16.92 (.67)

24.7 (.972)

16.24 (.64)

24.56 (.97)

11.09 (.44) 19.28 (.76) 2.74

19.39 (.76) 27.51 (1.08) 2.74

53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 33.24 (1.31) 41.30 (1.63) 2.77

69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 49.86 (1.96) 57.71 (2.27) 2.77

67 (2.64)

61.11 (2.41) 52.86 (2.08) 52.34 (2.06) 44.32 (1.75) 55.3 (2.18) 2.77

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

E±0.13 (.005)

POSITION #1

ø3.05 (.120)

10°

PLUG

SOCKET

13.56 (.534)

numbered cavities

F±0.38 (.015)

High density HR

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

POSITION #1

10°

ø3.05 (.120)

2.29±0.05 (.09±0.002)

PLUG

SOCKET

10.72 (.422)

numbered cavities

E±0.13 (.005)

DIMENSIONS mm (inch)

Nb OF

CONTACTS

30.84 (1.21) 24.99 (.98)

39.24 (1.54) 33.32 (1.31)

16.92 (.67)

24.7 (.972)

16.24 (.64)

24.56 (.97)

19.28 (.76)

27.51 (1.08)

53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 41.30 (1.63)

69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 57.71 (2.27)

67 (2.64)

61.11 (2.41) 52.86 (2.08) 52.34 (2.06)

55.3 (2.18)

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

45.79±0.13 (1.80±.005)

POSITION #1

10°

ø3.05 (.120)

2.41 (.095)

PLUG

SOCKET

13.56 (.534)

numbered cavities

E±0.38 (.015)

Panel mounting option

Standard density:

M3 or #4-40

front screwlock

ø3.1 (.122")

Fixed front female screwlock

VF / VFM

Standard rivet ø 3.1mm

no digit

M3 or #4-40

Threaded rear insert

H / G

High density:

M3 or #4-40

ø3.05 (.120")

Standard rivet ø3.05mm

no digit

Threaded rear insert

H / G

M3 or #4-40

front screwlock

Fixed front female screwlock

VF / VFM

Contacts

Standard density:

9.9 (.390")

1.75 (.069")

4.7 (.185")

9.4 (.370")

1.75 (.069")

4.7 (.185")

AWG

20-24

24-28

1.8 (.071”)

1.4 (.055”)

1.9 (.075”)

1.5 (.059”)

2.5 (.098”)

1.7 (.066”)

High density:

7.7 (.303")

0.95 (.037")

6.15 (.242")

1.65 (.065")

1.3 (.051")

6.15 (.242")

7.3 (.287")

0.9 (.035")

How to order RR (standard density)

Housings

L ..... RR ..... ..... ..... ..... .....

RoHS Compliant

front mounting type:

VF = front screwlock 4-40

VFM = front screwlock M3

177: tinned shell for recept-

acle

777: tinned shell + dimples

for plug

contact type:

P = pin

S = socket

shell size: E,A,B,C,D

Rear mounting type:

H = rear insert 4-40

G = rear insert M3

no digit = standard rivet

ø3.1mm

configuration:

09,15,25,37,50

F = float mounting

Contacts

L 17 RR ..... ..... ..... .....

RoHS Compliant

wire size:

packaging:

D1: 20 to 24 AWG

D2: 24 to 28 AWG

100 = bulkpack unit (100 cts)

400 = reel of 400 cts

2K = reel of 2000 cts

10K = reel of 10000 cts

(right feed reel)

contact type:

M = male

F = female

10G = reel of 10000 cts

(left feed reel)

REEL WINDING DIRECTION

full gold plating:

01 = Flash Gold

02 = 0.4µ (15µ")

04 = 0.76µ (30µ")

selective gold plating:

11 = Flash Gold

+ 2µm (78µ") Sn

12 = 0.4µ (15µ")

+ 2µm (78µ") Sn

14 = 0.76µ (30µ")

+ 2µm (78µ") Sn

Left to right feed reel:G Right to left feed reel:K

For special request, please consult factory

How to order HR (high density)

Housings

L ..... HR ..... ..... ..... ..... .....

RoHS Compliant

front mounting type:

VF = front screwlock 4-40

VFM = front screwlock M3

177: tinned shell for recept-

acle

777: tinned shell + dimples

for plug

contact type:

P = pin

S = socket

shell size: E,A,B,C,D

Rear mounting type:

H = rear insert 4-40

G = rear insert M3

no digit = standard rivet

ø3.05mm

configuration:

15,26,44,62,78

Contacts

L 17 HR D2 ..... ..... .....

RoHS Compliant

wire size:

packaging:

24 to 28 AWG

5K = reel of 5000 cts

(right feed reel)

5G = reel of 5000 cts

(left feed reel)

10K = reel of 10000 cts

(right feed reel)

10G = reel of 10000 cts

(left feed reel)

contact type:

M = male

F = female

full gold plating:

01 = Flash Gold

02 = 0.4µ (15µ")

04 = 0.76µ (30µ")

selective gold plating:

11 = Flash Gold

+ 2µm (78µ") Sn

12 = 0.4µ (15µ")

+ 2µm (78µ") Sn

14 = 0.76µ (30µ")

+ 2µm (78µ") Sn

REEL WINDING DIRECTION

Left to right feed reel:G Right to left feed reel:K

For special request, please consult factory

Tooling for crimp contacts

For standard density crimp contacts: 17RR series

• contact insertion and removal tool

• hand crimp tool for single contacts AWG 20 to 28

• hand crimp tool for reels of 400 contacts

crimp dies: AWG 20 to 24

17D 438 SP

17D 440 SP

FA 0000 762

FA 0000 104

FA 0000 102

FE 0400

crimp dies: AWG 24 to 28

• stripping box

• automatic crimp machine for reels of 2000 to 10000 contacts 970 MC

crimp dies: AWG 20 to 24

crimp dies: AWG 24 to 28

968 MC

972 MC

For high density crimp contacts: 17HR series

• automatic crimp machine for reels of 2000 to 10000 contacts 970 MC

crimp dies: AWG 24 to 28

973 MC

Do not hesitate to contact us for further information

Amphenol IT & Communication Products

Block A3/A4, The 4th Industrial District of

Industrial Headquarters, Dong Keng Road

Gong Ming Town, Shen Zhen China

Fax:+86(0)755 2754 9955

Technical Support

Tel:+86(0)755 2717 7945

Info-dsub@amphenol.com.cn

http://www.dsubconnector.com

DFR

D-Sub connectors - Stamped and Formed Contacts

FLAT RIBBON

D-SUB CONNECTORS

These connectors are suitable for

compact requirement of modern

peripheral equipment.

Specifications

• Connectors according to MIL C24308

Special contact design allows usage

of standard 1.27mm (.05") flat cable.

Suitable with all standard D-Sub hoods.

Materials and Platings

Shells

Insulator

Pin contacts

Steel with nickel plating

Glass-filled thermoplastic, UL 94V-0

Brass, selected gold in mating area;

2.54µm (100µ") min. tin

on termination area over

1.27µm (50µ") min. nickel

Socket contact

Phosphor bronze, selected gold in

mating area; 2.54µm (100µ") min. tin

on termination area over 1.27µm

(50µ") min. nickel

Rear insert

Screwlock

Brass, 2.54µm (100µ") min. nickel plated

Electrical Data

Current rating

Voltage rating

250V AC/rms 60Hz

1000V AC/rms 60Hz for one minute

1000MΩ

Withstanding voltage

Insulation resistance

Contact resistance

20mΩ max

Climatic Data

• Industrial

• Telecom

Operating temperature -40°C to +125°C

• Any industry standard

I / O connections

Mechanical Data

Single contact insertion force

Single contact withdrawal force

Mating and unmating force

Unit: kg ( lb)

0.54kg (1.19lb) max

0.06kg (0.13lb) min

No. of Cts

Mate (max)

3.05 (6.74)

5.09 (11.24)

8.44 (18.66)

12.51 (27.65)

Unmate (min)

9 (size E)

15 (size A)

25 (size B)

37 (size C)

0.36 (0.79)

0.46 (1.01)

0.81 (1.8)

1.1 (2.47)

Standard plating thicknesses

• gold flash

• 0.4µm (15µ") gold

• 0.76 µm (30µ") gold

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

E±0.05 (.002)

POSITION #1

10°

DIMENSIONS mm (inch)

Nb OF

CONTACTS

30.84 (1.21)

39.24 (1.54)

53.04 (2.09)

69.32 (2.73)

24.99 (.984)

33.32 (1.31)

47.04 (1.85)

63.50 (2.50)

16.92 (.666)

24.70 (.972)

38.96 (1.53)

55.42 (2.18)

16.24 (.639)

24.56 (.967)

38.38 (1.51)

54.76 (2.16)

11.09 (.437)

19.39 (.763)

33.24 (1.31)

49.86 (1.96)

2.74

2.77

STRAIN RELIEF

Panel mounting option

M3 or #4-40

ø3.05 (.120")

Standard rivet ø 3.05mm

no digit

Threaded rear insert

B / D

M3 or #4-40 screwlock

Front female screwlock

A / C

Tool

Support for hand termination tool:

974MC

How to order

L ... ... FR ... ... ... ... C309

RoHS Compliant

Plating option:

valid only for

0.76µm (30µ")

flash

gold

17D: tinned shell

for plug and

receptacle

part number must be written

as follow:

L 17D……………C309

L 117D…………..C309

0.4µm

(15µ”)

117D: tinned shell

for plug and

receptacle

contact type:

P = pin

shell size: E,A,B,C

S = socket

Flat ribbon cable type

configuration:

09, 15, 25, 37

mounting options:

no digit = standard rivet ø 3.05mm

A = front screwlock M3

C = front screwlock 4-40

B = rear insert M3

type:

A = front metal shell

B = all plastic

D = rear insert 4-40

: Standard options

For special request, please consult factory

Do not hesitate to contact us for further information

Amphenol IT & Communication Products

Block A3/A4, The 4th Industrial District of

Industrial Headquarters, Dong Keng Road

Gong Ming Town, Shen Zhen China

Fax:+86(0)755 2754 9955

Technical Support

Tel:+86(0)755 2717 7945

Info-dsub@amphenol.com.cn

http://www.dsubconnector.com

17H

D-Sub connectors - Stamped and Formed Contacts

DUAL PORT

D-SUB CONNECTORS

Amphenol's G17H dual port

Specifications

• Connectors according to MIL C24308

connectors are a state of the art

design. The front metal shell helps

reduce EMI / RFI emissions.

Materials and platings

Designed to save PC board space,

Amphenol ’s dual port provides two

I / O connectors in a minimal amount

of board space.

Shells

Insulator

Pin contacts

Steel, tin plated

Glass-filled thermoplastic, UL 94V-0

Brass, selected gold in mating area;

2.54µm (100µ") min. tin on termination

area over 1.27µm (50µ") min. nickel

Phosphor bronze, selected gold in

mating area; 2.54µm (100µ") min. tin

on termination area over 1.27µm

(50µ") min. nickel

Socket contact

Rear insert

Boardlock

Brass, 2.54µm (100µ") min. nickel plated

Phosphor bronze, 2.54µm (100µ") min. tin

plated

Economical

dual port

connectors

Screwlock

Brass, 2.54µm (100µ") min. nickel plated

Electrical Data

Current rating

Voltage rating

Withstanding voltage

Insulation resistance

Contact resistance

250V AC/rms 60Hz

1000V AC/rms 60Hz for one minute

1000MΩ

20mΩ max

Climatic Data

• Industrial

• Telecom

Operating temperature -55°C to +125°C

Salt spray 24 hours

• Any industry standard

I / O connections

Mechanical Data

Single contact insertion force

Single contact withdrawal force

Mating and unmating force

Unit: kg ( lb)

0.54kg (1.19lb) max

0.06kg (0.13lb) min

No. of Cts

Mate (max)

3.05 (6.74)

5.09 (11.24)

8.44 (18.66)

3.81 (8.42)

Unmate (min)

0.36 (0.79)

0.46 (1.01)

0.81 (1.8)

0.52 (1.14)

15 (Hi-den)

Standard plating thicknesses

• gold flash

• 0.4µm (15µ") gold

• 0.76 µm (30µ") gold

Shell size dimensions- standard and high density

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

E±0.05 (.002)

H***

3.81 (.150)

2.84 (.112)

POSITION #1

2.84 (.112)

* spacing between ports (see "how to order" for dimensions)

** profile distance (see "how to order" for dimensions)

*** Footprint options (see "how to order" for dimensions)

H*** Standard Density (SD)

High Density (HD)

SD / SD = 8.08mm (.318")

SD / HD = 5.08mm (.200")

= 8.89mm (.350")

HD / HD = 8.89mm (.350")

10°

= 5.08mm (.200")

Recommended P.C.B. Layout

ø3.05 (.120)

B±0.13 (.005)

E±0.05 (.002)

ø1.02 (.040)

only for quad boardlock

DIMENSIONS mm (inch)

Shell

Size

Nb OF

CONTACTS

C PLUG

D SOCKET

9/HD 15

15/HD 26

30.84 (1.21) 24.99 (.984) 16.92 (.666) 16.24 (.639) 11.09 (.437)

39.24 (1.54) 33.32 (1.31) 24.7 (.972) 24.56 (.967) 19.39 (.763)

53.04 (2.09) 47.04 (1.85) 38.96 (1.53) 38.38 (1.51) 33.24 (1.31)

15 (Hi-den) 30.84 (1.21) 24.99 (.984) 16.92 (.666) 16.24 (.639) 10.31 (.406)

37 69.32 (2.73) 63.50 (2.50) 55.42 (2.18) 54.76 (2.16) 49.86 (1.96)

Panel mounting option

Flange mounting options:

#4-40

front screwlock

M3 or #4-40

5.8 (.228")

Threaded rear insert

Fixed front female screwlock

0 / 4

M3 or #4-40

removable screwlock

4.8 (.189")

Removable female screwlock

1 / 5

Board mounting options:

#4-40

boardlock

boardlocks

Threaded hole

Dual arrowhead boardlock

Quad arrowhead boardlock

Dual Port Connectors

X X X X X X X X

L17H

Spacing Between Ports

Footprint Options

1 - F = 15.88mm (.625")

G= 28.42mm (1.12")

2 - F = 19.05mm (.750")

G= 31.60mm (1.24")

3 - F = 22.86mm (.900")

G= 35.41mm (1.39")

4 - SCSI

G= 12.80mm (.504")

7 - F = 20.70mm (.815")

G= 32.20mm (1.26")

SD / SD

BLANK = 8.08mm (.318")

SD / HD

BLANK = 5.08mm (.200")

889

HD / HD

BLANK = 8.89mm (.350")

508 = 5.08mm (.200")

= 8.89mm (.350")

Flange Mounting Options

0 = 4-40unc Rear Insert

Top Connector

1 = 4-40unc Removable Screwlock

3 = 3.05mm (.120”) Clear Hole

4 = M3 Rear Insert

1 = 9 Pos. Male

2 = 9 Pos. Female

3 = 15 Pos. Male

4 = 15 Pos. Female

5 = M3 Removable Screwlock

7 = 4-40unc Fixed Front Screwlock

5 = 25 Pos. Male

6 = 25 Pos. Female

Board Mounting Options

7 = 15 Pos. High Density Female

8 = 50 Pos. Female SCSI

9 = 26 Pos. High Density Female

J = 15 Pos. High Density Male

D = 37 Pos. Male

1 = 4 * Threaded 4-40unc Inserts

2 = Dual Arrowhead Boardlocks

3 = Quad Arrowhead Boardlocks

4 = 3.18mm (.125") Clear Hole

E = 37 Pos. Female

F = 44 Pos. High Density Male

G = 44 Pos. High Density Female

M = 62 Pos. High Density Male

N = 62 Pos. High Density Female

P = 78 Pos. High Density Male

Q = 78 Pos. High Density Female

Shell Plating

1 = Bright Tin / Nickel

2 = Nickel

Contact Plating

0 = Flash Gold

Bottom Connector

1 = 0.4µm (15µ") Gold

2 = 0.76µm (30µ") Gold

3 = Full Flash Gold

4 = 1.27µ” (50µ") Gold

1 = 9 Pos. Male

2 = 9 Pos. Female

3 = 15 Pos. Male

4 = 15 Pos. Female

5 = 25 Pos. Male

6 = 25 Pos. Female

7 = 15 Pos. High Density Female

8 = 50 Pos. Female SCSI

9 = 26 Pos. High Density Female

K = 15 Pos. High Density Male

D = 37 Pos. Male

E = 37 Pos. Female

F = 44 Pos. High Density Male

G = 44 Pos. High Density Female

M = 62 Pos. High Density Male

N = 62 Pos. High Density Female

P = 78 Pos. High Density Male

Q = 78 Pos. High Density Female

R = 9 Pos. Male + 9 Pos. Male

S = 9 Pos. Female + 9 Pos. Female

For special request, please consult factory

Do not hesitate to contact us for further information

Amphenol IT & Communication Products

Block A3/A4, The 4th Industrial District of

Industrial Headquarters, Dong Keng Road

Gong Ming Town, Shen Zhen China

Fax:+86(0)755 2754 9955

Technical Support

Tel:+86(0)755 2717 7945

Info-dsub@amphenol.com.cn

http://www.dsubconnector.com

D-Sub connectors - Stamped and Formed Contacts

RIGHT ANGLE

HIGH TEMPERATURE AND

HIGH DENSITY CONNECTORS

The Amphenol "HT" series allows the

customers to use through hole

connectors with reflow soldering

process.

Specifications

• Connectors according to MIL C24308

Materials and Platings

This series gives you Amphenol’s

high standards of quality and

reliability to meet of your

Shell

Insulator

Steel, tin over nickel plating

Glass filled thermoplastic, UL 94V-0

Copper alloy, selective gold plating

Brass with nickel plating

Contacts

Rear insert

Screwlock

Grounding clip

commercial requirements

Brass with nickel plating

Copper alloy with tin plating

Electrical Data

Current rating

Voltage rating

300V AC/rms 50Hz

1000V AC/rms 50Hz for one minute

5000MΩ

Withstanding voltage

Insulation resistance

Contact resistance

Economical

right angle PCB,

high temperature

connectors

10mΩ max

Climatic Data

Operating temperature

-55°C to +150°C, resist to short term (30s)

at 260°C

Mechanical Data

Mating and unmating force

Unit: kg ( lb)

• Industrial

• Telecom

No. of Cts

Mate (max)

Unmate (min)

• Any industry standard

I / O connections

3.81 (8.42)

5.95 (13.16)

9.26 (20.46)

13.48 (29.78)

0.52 (1.14)

1.05 (2.32)

1.37 (3.02)

1.76 (3.88)

Standard plating thicknesses

• gold flash

• 0.4 µm (15µ") gold

• 0.76 µm (30µ") gold

Shell size dimensions

POSITION #1

10˚

3.18 (.125)

Nb OF

Dimensions mm (inch)

CONTACTS

30.84 (1.214) 24.99 (.984)

16.26 (.640)

2.29 (.090)

2.41 (.095)

39.24 (1.545) 33.32 (1.312) 24.56 (.967)

53.04 (2.088) 47.04 (1.852) 38.30 (1.508)

69.34 (2.730) 63.50 (2.500) 54.76 (2.156)

P.C.B. Layout

5.47 (.215)

3.69 (.145)

0.25 (.010)

24.71 (.973)

0.59 (.023)

23.54 (.927)

Ø3.05 (.120)

Ø1.19(.047)

Ø3.05 (.120)

Ø1.19 (.047)

0.89

0.63(.025)

(.035)

22.3(.878)

23.5(.925)

24.75(.974)

4.83 (.190)

4.33 (.171)

15 PIN

62 PIN

9.65 (.380)

0.51 (.020)

8.63 (.340)

16.51 (.380)

0.51 (.020)

15.49 (.610)

Ø3.05 (.120)

Ø1.19 (.047)

Ø3.05 (.120)

Ø1.19 (.047)

0.64 (.025)

9.78 (.385)

0.64 (.025)

16.64 (.655)

14.23 (.560)

15.36 (.605)

7.37 (.290)

8.5 (.335)

26 PIN

44 PIN

Panel mounting option

# 4-40 or M3

Front female screwlock

4F/3F

Threaded rear insert

4F/3F

How to order

L 17 HT H ... ... ... ... ... ...

RoHS Compliant

high density

options:

O = open back side

no digit = closed back side

shell size:

E (15 ways)

A (26 ways)

B (44 ways)

C (62 ways)

packaging:

C = plastic tray

contact plating:

1 = gold flash

2 = 0.4µm (15µ")

4 = 0.76µm (30µ")

contact type:

P = Pin

S = Socket

mounting options:

4F = front screwlock 4-40

4R = rear insert 4-40

3F = front screwlock M3

3R = rear insert M3

For special request, please consult factory

Do not hesitate to contact us for further information

Amphenol IT & Communication Products

Block A3/A4, The 4th Industrial District of

Industrial Headquarters, Dong Keng Road

Gong Ming Town, Shen Zhen China

Fax:+86(0)755 2754 9955

Technical Support

Tel:+86(0)755 2717 7945

Info-dsub@amphenol.com.cn

http://www.dsubconnector.com

D-Sub connectors - Stamped and Formed Contacts

STRAIGHT PCB TERMINATION

HIGH TEMPERATURE

CONNECTORS

The Amphenol "HT" series allows

the customers to use through hole

connectors with reflow soldering

process.

Specifications

• Connectors according to MIL C24308

Materials and Platings

This series gives you Amphenol’s

high standards of quality and

reliability to meet all of your

commercial requirements

Shell

Steel, tin over nickel plating

Glass-filled thermoplastic, UL 94V-0

Copper alloy, selective gold plating

Brass with nickel plating

Insulator

Contacts

Boardlock

Screwlock

Brass with nickel plating

Electrical Data

Current rating

Voltage rating

600V AC/rms 50Hz

1000V AC/rms 50Hz for one minute

5000MΩ

Withstanding voltage

Insulation resistance

Contact resistance

Economical

straight PCB,

high temperature

connectors

10mΩ max

Climatic Data

Operating temperature

-55°C to +150°C, resist to short term (30s)

at 260°C

Mechanical Data

Mating and unmating force

Unit: kg ( lb)

• Industrial

• Telecom

No. of Cts

Mate (max)

Unmate (min)

• Any industry standard

I / O connections

3.05 (6.74)

5.09 (11.24)

8.44 (18.66)

12.51 (27.65)

0.36 (0.79)

0.46 (1.01)

0.81 (1.8)

1.1 (2.47)

Standard plating thicknesses

• gold flash

• 0.76 µm (30µ") gold

Shell size dimensions

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

POSITION #1

10°

4.8 (.189)

PLUG

SOCKET

7.7 (.303)

0.8 (.031)

*see chart "how to order"

Recommended P.C.B.Layout

ø3.2 (.126)

1.385 (.055)

ø1.0 (.039)

2.84 (.112)

DIMENSIONS mm (inch)

Nb OF

CONTACTS

30.84 (1.21)

39.24 (1.54)

53.04 (2.09)

69.34 (2.73)

24.99 (.984)

33.32 (1.31)

47.04 (1.85)

63.50 (2.50)

16.92 (.666) 16.26 (.640)

25.25 (.994) 24.56 (.967)

38.96 (1.53) 38.38 (1.51)

55.42 (2.18) 54.76 (2.16)

11.08 (.436)

19.39 (.763)

33.24 (1.31)

49.86 (1.96)

2.74

2.77

Panel mounting option

#4-40 or M3

ø3.25 (.128)

Standoff boardlock

RM5

Standoff boardlock

RM8

How to order

L 17 HT N ... ... ... ... ... ... ...

RoHS Compliant

standard density

packaging:

C = plastic tray

T = plastic tubes

shell size:

E (9 ways)

A (15 ways)

B (25 ways)

C (37 ways)

contact plating:

1 = gold flash

2 = 0.4µm (15µ")

4 = 0.76µm (30µ")

mounting options:

G = M3

H = 4-40

H,G must also be used

to specify the threading

of RM5 or RM8

grounding tabs.

grounding tabs:

RM5 = retention clip

RM8 = retention clip

+front screwlock

contact type:

P = pin

S = socket

termination:

OL2: L = 6.02mm (.237")

OL2C: L = 11.48mm (.452")

OL2E: L = 11.95mm (.470")

For special request, please consult factory

D-Sub connectors - Stamped and Formed Contacts

RIGHT ANGLE

HIGH TEMPERATURE CONNECTORS

FOOTPRINT 14.99mm (.590")

The Amphenol "HT" series allows

the customers to use through hole

connectors with reflow soldering

process.

Specifications

• Connectors according to MIL C24308

Materials and Platings

This series gives you Amphenol’s

high standards of quality and

reliability to meet all of your

commercial requirements

Shells

Insulator

Contacts

Steel, tin over nickel plating

Glass-filled thermoplastic, UL 94V-0

Copper alloy, selective gold plating

Brass with nickel plating

Rear insert

Screwlock

Grounding clip

Brass with nickel plating

Copper alloy with tin plating

Electrical Data

Current rating

Voltage rating

600V AC/rms 50Hz

1000V AC/rms 50Hz for one minute

5000MΩ

Withstanding voltage

Insulation resistance

Contact resistance

Economical

right angle PCB,

high temperature

connectors

10mΩ max

Climatic Data

Operating temperature

-55°C to +150°C, resist to short term (30s)

at 260°C

Mechanical Data

Mating and unmating force

Unit: kg ( lb)

• Industrial

• Telecom

No. of Cts

Mate (max)

Unmate (min)

• Any industry standard

I / O connections

3.05 (6.74)

5.09 (11.24)

8.44 (18.66)

12.51 (27.65)

0.36 (0.79)

0.46 (1.01)

0.81 (1.8)

1.1 (2.47)

Standard plating thicknesses

• gold flash

• 0.4 µm (15µ") gold

• 0.76 µm (30µ") gold

Shell size dimensions

A±0.38 (.015)

B±0.13 (.005)

C±0.25 (.01)

D±0.25 (.01)

POSITION #1

0.64*0.64 (.025*.025)

10°

12.55 (.494)

3.18 (.125)

Recommended P.C.B.Layout

E±0.13 (.005)

ø1.19 (.047)

2*ø3.20 (.126)

1.385 (.054)

B±0.13 (.005)

DIMENSIONS mm (inch)

Nb OF

CONTACTS

30.84 (1.214) 24.99 (.984)

16.92 (.666) 16.26 (.640)

11.08 (.436)

19.39 (.763)

2.74

2.77

39.24 (1.545) 33.32 (1.312) 25.25 (.994) 24.56 (.967)

53.04 (2.088) 47.04 (1.852) 38.96 (1.534) 38.30 (1.508) 33.24 (1.309)

69.34 (2.730) 63.50 (2.500) 55.42 (2.182) 54.76 (2.156) 49.86 (1.963)

Panel mounting option

#4-40 or M3

Front female screwlock

4F/3F

Threaded rear insert

4R/3R

How to order

17 HT

N ... ... AB ... ... ... ...

options:

O = open back

standard density

no digit = closed back

shell size:

E (9 ways)

A (15 ways)

B (25 ways)

C (37 ways)

packaging:

C = plastic tray

T = plastic tubes

contact plating:

1 = gold flash

2 = 0.38µm (15µ")

4 = 0.76µm (30µ")

contact type:

P = pin

S = socket

mounting options:

footprint:14.99mm ( .590")

4R = rear insert 4-40

3R = rear insert M3

4F = front screwlock 4-40

3F = front screwlock M3

For special request, please consult factory

HTN

D-Sub connectors - Stamped and Formed Contacts

RIGHT ANGLE

HIGH TEMPERATURE

CONNECTORS

The Amphenol HTN series allows the

use of a through hole connector with

reflow soldering process.

Specifications

• Connectors according to MIL C24308

This series gives you Amphenol’s

high standard of quality and

reliability, to meet all of your

commercial requirements.

Materials and Platings

Shell

Steel, tin over nickel plating

Insulator

Glass-filled thermoplastic, UL 94V-0

Copper alloy, selective gold plating

Brass, tin over nickel plating

Copper alloy with tin plating

Contacts

Rear insert

Screwlock

Grounding clip

Electrical Data

Current rating

Voltage rating

Withstanding voltage

Insulation resistance

Contact resistance

Economical

right angle PDB,

hight temperature

connectors

600V AC/rms 50Hz

1000V AC/rms 50Hz for one minute

5000MΩ

10mΩ max

Climatic Data

Operating temperature

-55°C to +150°C, resist to short term soldering

at 260°C for 20sec.

Mechanical Data

Mating and unmating force

Unit: kg ( lb)

• Industrial

• Telecom

No. of Cts

Mate (max)

Unmate (min)

• Any industry standard

I / O connections

3.05 (6.74)

5.09 (11.24)

8.44 (18.66)

12.51 (27.65)

0.36 (0.79)

0.46 (1.01)

0.81 (1.8)

1.1 (2.47)

Standard plating thicknesses

• Gold flash

• 0.4 µm (15µ") Gold

• 0.76 µm (30µ") Gold

Shell size dimensions

A±0.38 (.015)

B±0.13 (.005)

C±0.13 (.005)

D±0.13 (.005)

10°

E±0.05 (.002)

POSITION #1 POSITION #1

F±0.1 (.004 )

6.3 (.248)

PLUG

SOCKET

3.2 (.126)

DIMENSIONS mm (inch)

Nb OF

CONTACTS

30.81 (1.21)

39.14 (1.54)

53.04 (2.09)

69.32 (2.73)

24.99 (.98)

33.32 (1.31)

47.04 (1.85)

63.50 (2.50)

16.92 (.67)

16.24 (.64)

11.09 (.44)

19.39 (.76)

33.24 (1.31)

49.86 (1.96)

2.74 (.108)

2.77 (.109)

25.25 (.99)

24.56 (.97)

38.96 (1.53) 38.38 (1.51)

55.42 (2.18) 54.76 (2.16)

Recommended P.C.B.Layout

B±0.05 (.002)

E±0.05 (.002)

F±0.1 (.004)

POSITION #1

ø1 (.039)

2*ø3.2 (.126)

Panel mounting option

#4-40 or M3

Front female screwlock

4F/3F

Threaded rear insert

4R/3R

How to order

L17 HT

... ... ... ... ... ...

RoHS Compliant

Options:

O = Open back side

Standard density

no digit = Closed back side

Shell size:

E = 9 ways

A = 15 ways

B = 25 ways

C = 37 ways

Packaging:

C = Carton boxes

T = Plastic tubes

Contact plating:

1 = Gold flash

2 = 0.4µm (15µ")

4 = 0.76µm (30µ")

Contact type:

P = Plug

S = Socket

Mounting plating:

4R = Rear insert 4-40

3R = Rear insert M3

4F = Front screwlock 4-40

3F = Front screwlock M3

For special request, please consult factory

D-DF

D-Sub connectors - Screw-machined Contacts

FIXED MACHINED

CONTACT CONNECTOR

Amphenol’s 17D and 17DF series

fixed contact D-Subminiature

connector is suitable for industrial

or telecom use.

Specifications

• Connectors according to MIL C24308 - NFC93425-HE5

Materials and Platings

Shells

Steel tinned with dimples on plug connector

The machined contact provide

stability and reliability.

Insulator

Rear insert

Glass-filled thermoplastic, UL 94V-0

Brass, 3µm up to 5µm (118µ"up to 197µ")

tinned over nickel 2µm up to 3µm

(78µ" up to 118µ")

This series offers the broadest range

of termination options in the

Amphenol line.

Boardlock

Screwlock

Contacts

Tin plating 4µm up to 6µm

(157µ” up to 236µ”) over nickel 2µm up to 3µm

(78µ” up to 118µ”)

Brass, 6µm up to 10µm (236µ" up to 394µ")

tinned over nickel 2µm up to 3µm

(78µ" up to 118µ")

D: brass

Connectors

for industrial

and

DF: pin = brass

socket = copper alloy

Right angle version: full gold plating over 2µm to

3µm nickel

Straight version: full gold plating over 2µm up to

3µm (78µ” up to 118µ”) nickel

Electrical Data

telecom use

Current rating

7.5A

Voltage rating

300V AC/rms 50Hz

1000V AC/rms 50Hz for one minute

5000MΩ

Withstanding voltage

Insulation resistance

Contact resistance

• Medical

• Industrial

• Telecom

D: 8.5mΩ max

DF: 5mΩ max

• Any industry standard

I / O connections

Climatic Data

Operating temperature D / DF: -55°C to + 125°C

Salt spray

Humidity

48 hours

D: 21 days (40˚C - 95% HR)

DF: 56 days (40˚C - 95% HR)

Mechanical Data

Mating and unmating force

Unit: kg ( lb)

No. of Cts

Mate (max)

Unmate (min)

9 (size E)

15 (size A)

25 (size B)

37 (size C)

50 (size D)

3.05 (6.74)

5.09 (11.24)

8.44 (18.66)

12.51 (27.65)

14.65 (32.38)

0.36 (0.79)

0.46 (1.01)

0.81 (1.8)

1.1 (2.47)

1.6 (3.56)

Shell size dimensions

1.50

0.90

B’

ø3.10

Contact

P: Pin

S: Socket

B‘

D‘

F‘

G‘

0/-0.50

Shell

size

±0.25

(±.010)

0/-0.20

+0.20/0

±0.10

(±.004)

0/-0.25

+0.25/0

±0.20

+0.05/-0.20 +0.10/-0.20 +0.10/-0.20

±0.10

+0.10/-0.40

(0/-.008) (+.008/0)

(0/-.010) (+.010/0)

(±.008) (+.002/-.008) (+.004/-.008) (+.004/-.008) (±.004) (+.004/-.016) (0/-.020)

16.8

(.661”) 25.0

(.984”)

10.9

5.9

12.4

19.4

11.0

30.7

(.323”)

(.429”)

(.232”)

(.488”)

(.764”) (.433”)

(1.209”)

16.4

8.0

11.1

6.2

(.646”)

(.315”)

(.437)

(.244”)

25.1

(.988”)

8.2

(.323”)

10.9

(.429”)

5.9

(.232”)

12.4

(.488”)

27.7 11.0

(1.091”) (.433”)

39.0

(1.535”)

33.3

(1.311”) 8.0

(.315”)

24.8

(.976”)

11.1

(.437)

6.2

(.244”)

38.8

(1.528”)

8.2

(.323”)

11.0

(.433”)

5.8

(.228”)

12.4

(.488”)

41.4 11.0

(1.630”) (.433”)

52.9

(2.083”) 38.5

(1.513”)

47.0

(1.850”) 8.0

11.1

(.437)

6.2

(.244”)

(.315”)

55.3

(2.177”)

8.2

(.323”)

11.0

(.433”)

5.8

(.228”)

12.4

(.488”)

57.9 11.0

(2.280”) (.433”)

69.2

(2.724”)

63.5

(2.500”)

54.9

(2.161”)

8.0

(.315”)

11.1

(.437)

6.2

(.244”)

52.7

(2.075”)

11.0

(.433”) 15.2

(.598”)

11.0

(.433”)

5.8

(.228”) 55.5 13.8

(2.185”) (.543”)

66.8

(2.630”)

61.1

(2.406”)

52.5

(2.067”)

10.9

(.429”)

11.1

(.437)

6.2

(.244”)

Panel cutouts

Optimal cutout for rear mounting

Standard cutout

10˚

øG

G H

Rd Rading J

Shell

size

Mounting

method

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

±0.20

(±.008)

22.2

(.874”)

20.5

(.807”)

30.5

(1.201”)

28.8

(1.134”)

44.3

(1.744”)

42.5

(1.673”)

60.7

(2.390”)

59.1

(2.327”)

58.3

11.1

(.437”)

10.2

(.402”)

15.3

(.602”)

14.4

(.567”)

22.1

(.870”)

21.3

(.839”)

30.4

(1.197”)

29.5

(1.161”)

29.2

13.0

(.512”)

11.4

(.449”)

13.0

(.512”)

11.4

(.449”)

13.0

(.512”)

11.4

(.449”)

13.0

(.512”)

11.4

(.449”)

15.8

6.5

(.256”)

5.7

(.224”)

6.5

(.256”)

5.7

(.224”)

6.5

(.256”)

5.7

(.224”)

6.5

(.256”)

5.7

(.224”)

7.9

2.1

(.083”)

3.4

(.0134”)

2.1

(.083”)

3.4

(.0134”)

2.1

(.083”)

3.4

(.0134”)

2.1

(.083”)

3.4

(.0134”)

2.1

Front

Rear

Front

Rear

Front

Rear

Front

Rear

Front

Rear

25.0

12.5

3.0

1.5

(.984”)

(.492”)

(.118”)

(.059”)

33.3

(1.311”)

16.7

(.657”)

3.0

(.118”)

1.5

(.059”)

47.0

(1.850”)

23.5

(.925”)

3.0

(.118”)

1.5

(.059”)

63.5

(2.500”)

31.7

(1.248”)

3.0

(.118”)

1.5

(.059”)

(2.295”)

56.3

(2.217”)

(1.150”)

28.2

(1.110”)

(.622”)

14.1

(.555”)

(.311”)

7.1

(.280”)

(.083”)

3.4

(.0134”)

61.1

(2.406”)

30.6

(1.205”)

3.0

(.118”)

1.5

(.059”)

Termination

Right angle

MIL Footprint

without bracket:

2.84 (.112”)

8.1 (.319”)

ø1.02 (.040”)

ø0.6 (.024”)

plastic bracket:

8.1 (.319”)

2.84 (.112”)

8.1 (.319”)

2.84 (.112”)

ø1.02

(.040”)

ø0.6 (.024”)

AJ3

AJ4

metal bracket:

8.1 (.319”)

14.99 (.59”)

2.84 (.112”)

ø1.02 (.040”)

8.1 (.319”)

ø0.6 (.024”)

AM4: A=13.2mm

AZ4: A=11.5mm

AM4B

50 contacts:

8.1 (.319”)

2.84 (.112”)

Termination

European footprint

without bracket:

10.3

(.406”)

ø0.6 (.024”)

1AON: X=2.54mm

1BON: X=2.84mm

plastic bracket:

6.2 (.244”)

10.3 (.406”)

ø0.6 (.024”)

1APN: X=2.54mm

1BPN: X=2.84mm

1AUN: X=2.54mm

1BUN: X=2.84mm

metal bracket:

6.2 (.244”)

10.3 (.406”)

ø0.6 (.024”)

1AMN: X=2.54mm

1BMN: X=2.84mm

1ATN: X=2.54mm

1BTN: X=2.84mm

50 contacts:

10.3 (.406”)

Termination

Solder Cup:

Wire Wrap:

termination

F179

Nb of wraps

9.6mm (.378”)

13mm (.512”)

F179A

0.78/0.86

(.0.31”/.034”)

Straight PCB:

termination

0.6mm (.024”)

1.02mm (.040”)

0.6mm (.024”)

3.2mm (.126”)

2.4mm (.095”)

4mm (.157”)

5.5mm (.217”)

OL2

Grounding tabs:

For straight termination

For R/A termination

M3 or #4-40

FOR PCB 1.6

M3 or #4-40

for holes ø3.2 (.126”)

RM5

RM8

RM6

Panel mounting option

For straight and R/A termination

M3 or #4-40

float

3.6 (.141”)

3.4 (.134”)

ø3.1 (.122”)

ø2.2 (.086”)

Standard rivet 3.1mm

Float mounting

Threaded rear insert

no digit

H / G

M3 or #4-40

front screwlock

M3 or #4-40

removable screwlock

6.2 (.244”)

Fixed front female screwlock

Removable female screwlock

VF / VFM

VF2 / VFM2

Recommended PCB Layout

2 x ø3,2 (.126”)

D size

E,A,B,C size

2.74 (.108”) for size E,A

2.76 (.109”) for size B,C,D

0.9 (.035”) for U - T - OL2

and right angle termination

1.30 (.05”) for V termination

For straight PCB: X = 2.84mm (.112”)

MIL: X = 2.84mm (.112”)

European: X = 2.54mm (.100”), 2.84mm in option

For right angle PCB:

size E

size A

size B

size C

size D

C±0,1 (.004)

25 (.984)

33.3 (1.311)

47 (1.85)

63.5 (2.5)

61.1 (2.406)

F±0,05 (.002) 10.96 (.431)

19.18 (.755) 33.12 (1.304) 49.68 (1.956) 44.2 (1.74)

How to order

D-Sub connectors - Stamped and Formed Contacts

RIGHT ANGLE

HIGH DENSITY CONNECTORS

Specifications

Amphenol’s high density

D-Sub connectors complement

Amphenol’s extensive D-Sub

connector line. This line offers many

superior features, high performance

level and low installation cost.

• Connectors according to: MIL C24308

Materials and Platings

Shells

Steel, tin over nickel plating

Glass filled thermoplastic, UL 94V-0

Copper alloy, selective gold plating

Brass with nickel plating

Body

Contacts

Rear insert

Screwlock

Grounding clip

The decreased contact spacing

accommodates greater signal

density in comparison to conventional

D-Sub connectors.

Brass with nickel plating

Copper alloy with tin plating

Electrical Data

Current rating

Voltage rating

300V AC/rms 50Hz

1000V AC/rms 50HZ for one minute

5000MΩ

Economical

right angle PCB

Withstanding voltage

Insulation resistance

Contact resistance

10mΩ Max.

Climatic Data

Operating temperature -55°C to +125°C

Mechanical Data

Mating and unmating force

Unit: kg (lb)

• Industrial

• Telecom

• Any industry standard

I / O connections

No. of Cts

Mate (max)

3.81 (8.42)

Unmate (min)

0.52 (1.14)

1.05 (2.32)

1.37 (3.02)

1.76 (3.88)

5.95 (13.16)

9.26 (20.46)

13.48 (29.78)

Standard plating thickness

• gold flash

• 0.4µm (15µ”) gold

• 0.76µm (30µ”) gold

P.C.B. Layout

24.71 (.973)

0.59 (.023)

23.54 (.927)

3.69 (.145)

0.25 (.010)

5.47 (.215)

ø3.05 (.120)

ø1.19 (.047)

ø3.05 (.120)

ø1.19 (.047)

0.63 (.025)

0.89

(.035)

22.3 (.878)

23.5 (.925)

24.75 (.974)

4.83 (.190)

4.33 (.171)

15 PIN

62 PIN

9.65 (.380)

8.63 (.340)

16.51 (.650)

0.51 (.020)

15.49 (.610)

0.51 (.020)

ø3.05 (.120)

ø1.19 (.047)

ø3.05 (.120)

ø1.19 (.047)

0.64 (.025)

16.64 (.655)

7.37 (.290)

8.5 (.335)

14.23 (.560)

15.36 (.605)

9.78 (.385)

26 PIN

44 PIN

Socket - Top side PCB layouts

Panel mounting option

# 4-40 screwlock or M3

# 4-40 or M3

Front female screwlock

4F / 3F

Threaded rear insert

4R / 3R

Shell size dimensions

POSITION #1

10˚

3.18 (.125)

NB OF

DIMENSIONS mm (inch)

CONTACTS

30.84 (1.214)

39.24 (1.545)

53.04 (2.088)

69.34 (2.730)

24.99 (.984)

16.26 (.640) 2.29 (.090)

33.32 (1.312) 24.56 (.967) 2.29 (.090)

47.04 (1.852) 38.30 (1.508) 2.29 (.090)

63.50 (2.500) 54.76 (2.156) 2.41 (.095)

How to order

L ... HD ... ... ... CH ... C309

RoHS Compliant

plating option

valid only for

0.76µm (30µ”)

77: tinned shell

for receptable

717: tinned shell

+ dimples

gold

flash

part numbers must be written

as follow:

for plug

77HD....................C309

717HD..................C309

177: tinned shell

for receptable

777: tinned shell

+ dimples

0.4µm

(15µ")

mounting options:

for plug

4R = rear insert 4-40

4F = front screwlock 4-40

3R = rear insert M3

configuration: E15, A26, B44, C62

3F = front screwlock M3

contact type:

P = Pin

S = Socket

PCB locking type:

grounding tabs + boardlocks

Footprint:

D0 : 1.50mm

D1 : 8.89mm

D2 : 5.08mm

D3 : 2.50mm

For special request, please consult factory

Do not hesitate to contact us for further information

Amphenol IT & Communication Products

Block A3/A4, The 4th Industrial District of

Industrial Headquarters, Dong Keng Road

Gong Ming Town, Shen Zhen China

Fax:+86(0)755 2754 9955

Technical Support

Tel:+86(0)755 2717 7945

Info-dsub@amphenol.com.cn

http://www.dsubconnector.com

G517-A

D-Sub connectors - Stamped and Formed Contacts

GENDER CHANGER

These connectors allow you to

change the gender of your cable

assembly, and or panel D-Sub connectors.

Specifications

• Connectors according to MIL C24308

This series gives you Amphenol's

high standards of quality and reliability

to meet all of your commercial

requirements.

Materials and Platings

Shells

Steel, 2.54µm (100µ”) tin over 1.27µm

(50µ”) nickel plated

Insulator

Glass-filled nylon, UL 94V-0

Pin contacts

Screwlock

Brass, gold plated over 1.27µm (50µ”) nickel

Brass, 2.54µm (100µ") min. nickel plated

Electrical Data

Current rating

Voltage rating

250V AC/rms 60Hz

1000V AC/rms 60Hz for one minute

1000MΩ

Withstanding voltage

Insulation resistance

Contact resistance

Economical

gender changer

D-Sub’s

20mΩ max

Climatic Data

Operating temperature -55°C to +105°C

• Industrial

• Telecom

• Any industry standard

I / O connections

Shell size dimensions

Male to male adaptor

PAPT

Nb OF

DIMENSIONS mm (inch)

NUMBER

CONTACTS

L G517 97001

L G517 97002

L G517 97003

L G517 97004

30.81 (1.21)

39.14 (1.54)

53.04 (2.09)

69.32 (2.73)

24.99 (.984)

33.32 (1.31)

47.04 (1.85)

63.5 (2.50)

16.92 (.666)

25.25 (.994)

38.96 (1.53)

55.42 (2.18)

Shell size dimensions

Male to female adaptor

PAPT

Nb OF

DIMENSIONS mm (inch)

NUMBER

CONTACTS

L G517 97009

L G517 97010

L G517 97011

L G517 97012

30.81 (1.21)

39.14 (1.54)

53.04 (2.09)

69.32 (2.73)

24.99 (.984)

33.32 (1.31)

47.04 (1.85)

63.5 (2.50)

16.92 (.666)

25.25 (.994)

38.96 (1.53)

55.42 (2.18)

16.33 (.643)

24.66 (.971)

38.38 (1.51)

55.84 (2.20)

Shell size dimensions

Female to female adaptor

PAPT

Nb OF

DIMENSIONS mm (inch)

NUMBER

CONTACTS

L G517 97005

L G517 97006

L G517 97007

L G517 97008

30.81 (1.21)

39.14 (1.54)

53.04 (2.09)

69.32 (2.73)

24.99 (.984)

33.32 (1.31)

47.04 (1.85)

63.5 (2.50)

16.33 (.643)

24.66 (.971)

38.38 (1.51)

55.84 (2.20)

Do not hesitate to contact us for further information

Amphenol IT & Communication Products

Block A3/A4, The 4th Industrial District of

Industrial Headquarters, Dong Keng Road

Gong Ming Town, Shen Zhen China

Fax:+86(0)755 2754 9955

Technical Support

Tel:+86(0)755 2717 7945

Info-dsub@amphenol.com.cn

http://www.dsubconnector.com

G517-B

D-Sub connectors - Stamped and Formed Contacts

ADAPTORS D-SUB TO D-SUB

9 TO 9 AND 25 TO 25

This series gives you Amphenol’s high

standards of quality and reliability to

meet all of your commercial

requirements.

Specifications

• Connectors according to MIL C24308

Materials and Platings

Shells

Steel, 2.54µm (100µ”) tin over 1.27µm

(50µ”) nickel plated

Insulator

Glass-filled nylon, UL 94V-0

Brass, gold plated over 1.27µm (50µ”) nickel

Phosphor bronze, gold plated over

1.27µm (50µ”) nickel

Pin contacts

Socket Contact

Overmold

Screw

PVC, UL 94V-0

Brass with nickel plating

Economical

D-Sub

Electrical Data

Current rating

Voltage rating

250V AC/rms 60Hz

1000V AC/rms 60Hz for one minute

1000MΩ

adaptors

Withstanding voltage

Insulation resistance

Contact resistance

20mΩ max

• Industrial

• Telecom

Climatic Data

Operating temperature -55°C to +105°C

• Any industry standard

I / O connections

Shell size dimensions

9-position to 9-position

Wiring table

PAPT

NUMBER

Description

Color

L G517 97001

L G517 97002

L G517 97015

beige

gray

black

D-Sub Male 9-pos. to D-sub Male 9-pos.

L G517 97016

L G517 97017

L G517 97018

beige

gray

black

D-Sub Female 9-pos. to D-sub Female 9-pos.

D-Sub Male 9-pos. to D-sub Female 9-pos.

L G517 97019

L G517 97020

L G517 97021

beige

gray

black

Shell size dimensions

25-position to 25-position

Wiring table

...

PAPT

NUMBER

Description

Color

L G517 97022

L G517 97023

L G517 97024

beige

gray

black

D-Sub Male 25-pos. to D-sub Male 25-pos.

L G517 97025

L G517 97026

L G517 97027

beige

gray

black

D-Sub Female 25-pos. to D-sub Female 25-pos.

D-Sub Male 25-pos. to D-sub Female 25-pos.

L G517 97028

L G517 97029

L G517 97030

beige

gray

black

D-Sub connectors - Stamped and Formed Contacts

IDC DISCRETE

WIRE CONNECTORS

Amphenol IDC discrete D-subs offer

low-profile design that accommodates

many of the compact requirements of

computer interfacing, instrumentation

and, business equipment.

Materials and Platings

Shells

Steel, tin over nickel

Phosphor bronze

Contacts

Plating

Contact area: gold over nickel

IDC area: tin over nickel

Fast, four-point solderless termination

ensures reliable connections.

Wire types

Solid and stranded wires AWG 24-28

This series is available in 9, 15, 25, & 37

contact configurations.

Contacts, including stain relief, are

easily removable in case of repair.

Electrical Data

Current rating

Voltage rating

Dlelectric

500V AC at sea level

Thermoplastic Polyesther UL 94 VO rated

Simplify

your cable

assemblies

Climatic Data

Operating temperature -55°C to +125°C

Salt spray

24 hours

Mechanical Data

Mating and unmating force

Size E 30 N Max. 3.5 N Mini.

Size A 50 N Max. 4.5 N Mini.

Size B 83 N Max. 8.0 N Mini.

Size C 123 N Max. 11.0 N Mini.

• Industrial

• Telecom

Standard plating thickness

Gold flash

0.4µm (15µ") Gold

0.76 µm (30µ") Gold

• Any industry standard

I / O connections

Plug version

Nb OF

CONTACTS

DIMENSIONS mm (inch)

30.81

(1.21)

16.92

(0.67)

24.99

(0.98)

14.90

(0.59)

39.14

(1.54)

25.25

(0.99)

33.32

(1.31)

23.00

(0.91)

53.04

(2.09)

38.96

(1.53)

47.04

(1.85)

36.90

(1.45)

69.32

(2.73)

55.42

(2.18)

63.50

(2.50)

59.30

(2.33)

Socket version

Nb OF

CONTACTS

DIMENSIONS mm (inch)

30.81

(1.21)

16.24

(0.64)

24.99

(0.98)

14.90

(0.59)

39.14

(1.54)

24.56

(0.97)

33.32

(1.31)

23.00

(0.91)

53.04

(2.09)

38.38

(1.51)

47.04

(1.85)

36.90

(1.45)

69.32

(2.73)

54.76

(2.16)

63.50

(2.50)

59.30

(2.33)

Tooling for IDC connectors

Terminating frame Ref: 21046

Terminating head Ref: 976 MC

Connector holders references

Number

Plug

Socket

of Contacts

991 MC 992 MC

993 MC 994 MC

995 MC 996 MC

997 MC 998 MC

Hand tool

Ref: 989 MC Single insertion tool

How to order

L 17MP ... ... ... ... ... ...

RoHS Compliant

OPTION: consult factory

Flange mounting option

IDC Series

0 = Clear hole ø3.1mm (.122”)

1 = Rear insert # 4-40

2 = Rear insert M3

Number of position

09 = 9 ways

15 = 15 ways

25 = 25 ways

37 = 37 ways

3 = Front screwlock # 4-40

4 = Front screwlock M3

Front shell plating

1 = Tinned

Contact type

(plugs with dimples)

0 = Socket

1 = Plug

Contact plating

Selective gold plating

0 = Gold flash

1 = 0.4 µm (15µ”)

2 = 0.76 µm (30µ”)

Do not hesitate to contact us for further information

Amphenol IT & Communication Products

Block A3/A4, The 4th Industrial District of

Industrial Headquarters, Dong Keng Road

Gong Ming Town, Shen Zhen China

Fax:+86(0)755 2754 9955

Technical Support

Tel:+86(0)755 2717 7945

Info-dsub@amphenol.com.cn

http://www.dsubconnector.com

Sealed D-Sub Connectors

SD308

SPECIFICATIONS:

PRODUCT FEATURES

• One piece machined Aluminum Shell

• Gold Plated Screw Machine Contacts

For Sea, Air or Land,

these connectors are SEALED!

Amphenol’s SD308 Sealed

• Hi Grade Thermoplastic Inserts -67°F to +257°F (-55°C to +125°C)

• Integrated Blind Panel Mounts

• Supplied with Conductive Panel Seal Gasket

D-Subminiature Connectors

are available in the full range of

standard density and hi-density

insert arrangements, pin and

socket contacts. These connectors

are supplied with ﬁxed screw

machine contacts and are available

in Solder Cup, Straight PCB, and

Right Angle PCB terminations.

MATERIALS AND PLATINGS

Shells

Machined aluminum alloy, tin plated

Inserts

Contacts

Seal

High temperature resistant polyethersulfone per mil-p-46185

Copper alloy, 20µ" (0.51µm) gold plated over nickel.

Silicone elastomer with nickel plated graphite ﬂake

ELECTRICAL DATA

Current Rating

Insulation Resistance

Working Voltage

D.W.V.

5 GIGOHM @ 500 VDC

120 VAC

1,000 VAC pin to pin & pin to shell

• Ruggedized Computers

and Peripheral Equipment

• Industrial Controllers

• 21st Century Soldier

• Ideal For Retroﬁt Applications

Or Late Design-In

CLIMATIC DATA

Operating Temperature

-67°F to +257°F (-55°C to +125°C)

SD308 - E09 - S - A - 1 - 000

Series Designation

000 = Standard part

other deviations as required

Shell Size & Number 0f Contacts

STD Density E09, A15, B25, C37, D50

Mounting Type

HIGH Density E15, A26, B44, C62, D78, 6106

1 = 4-40 Blind Nut

2 = 4-40 Blind Nut with R/A Mounting Bracket

Contact Type

S=Socket Contact P= Pin Contact

Termination Style

A = Right Angle pcb B = Vertical pcb

C = Solder Cup

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

Filtered D-Sub Connectors, Ruggedized

FD308

SPECIFICATIONS:

DESCRIPTION

• Hi reliability ﬁltering in multi row arrangements

• Stamped and Formed shells

• Screw Machine Contacts and Hi Reliability inserts

• Available in all Hi-Density insert patterns

For 50 position and all high density

versions. Amphenol’s FD308 Filtered

D-Subminiature connectors are

available in the full range of hi-

density insert arrangements, pin and

socket contacts, plus the 50 position

standard density. These connectors

are supplied with ﬁxed screw

MATERIALS AND PLATINGS

Shells

Inserts

Contacts

Stamped steel shell, tin plated

High temperature resistant polyethersulfone per MIL-P-46185

Machined copper alloy, 20µ" (0.51µm) gold plated over nickel

Capacitor Barium titanate ceramic array

ELECTRICAL DATA

machine contacts and are available

in Straight and Right Angle PCB

terminations and Solder Cup.

Current Rating

Insulation Resistance

Working Voltage

D.W.V.

5 A

5 GIGOHM @ 500 VDC

200 VDC

500 VDC pin to pin & pin to shell

+/- 20% ( see P/N description )

Capacitance

• Computers and Peripheral Equipment

• Avionics Systems Ideal For Retroﬁt

Applications Or Late Design-In

CLIMATIC DATA

Operating Temperature

-67°F to +257°F (-55°C to +125°C)

FD308 - B44 - S - A - 1 - A2 - 000

Series Designation

000 = Standard part

other deviations as required

Size & Number 0f Contacts

STD Density E09, A15, B25, C37, D50

High Density E15, A26, B44, C62, D78, 6104

Capacitance Code

A2 = 200 PF

A4 = 400 PF

01 = 1000 PF

02 = 2000 PF

05 = 5000 PF

Contact Type

S = Socket Contact P = Pin Contact

Mounting Type

1 = 4-40 Clinch Nut

Termination Style

2 = Ø.120 (3.05) Hole

3 = R/A Mounting Bracket

4 = 4-40 Clinch Nut

A = Right Angle pcb

B = Vertical pcb

C = Solder Cup

with R/A Mounting Bracket

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

Ordering Information

FCC17

ORDERING INFORMATION - IDC

FCC17 - E09 - S - W - 4 - 8 - 0 - G

Series Designation

Special

G: 50 Micro Inches Gold

Size and Conﬁguration

15 & 25 Size Consult Factory.

Modiﬁer

0: Standard Product

x: Special or Custom Versions

Connector Type

S: Socket P: Pin Consult Factory.

Capacitance Value

D: 50 pF

Termination Type

5: 1,000 pF

E: 2,200 pF

9: 5,600 pF

8: 47,000 pF

W: IDC *

0: 180 pF

F: 330 pF

1: 470 pF

4: 820 pF

Mounting

2: .120 (3.05) Diameter Through Hole

4: 4-40 Threaded Inserts

6: M3 Threaded Inserts

Other Capacitance values available.

Consult Factory.

ORDERING INFORMATION - FILTERED PRESS FIT

FCC17 - B25 - S - R - 4 - 8 - 0 - G

Series Designation

Special

G: 50 Micro Inches Gold

Size and Conﬁguration *

Modiﬁer

Connector Type

0: Standard Product

x: Special or Custom Versions

S: Socket P: Pin Consult Factory.

Termination Type

Capacitance Value

D: 50 pF

R: Press Fit

5: 1,000 pF

E: 2,200 pF

9: 5,600 pF

8: 47,000 pF

0: 180 pF

F: 330 pF

1: 470 pF

4: 820 pF

Mounting

2: .120 (3.05) Diameter Through Hole

3: 4-40 Self Locking Threaded Insert

4: 4-40 Threaded Inserts

5: 4-40 Threaded Standoff

6: M3 Threaded Inserts

E: Code 4 with 4-40 Hex Jack Socket

Other Capacitance values available.

Consult Factory.

ORDERING INFORMATION - STACKED D-SUB

FCC17 - 2 - BP - BS - 4 - 5 - 5 - X

Series Designation

Modiﬁer

0: Standard Product

Vertical Mounting Dimension Between Connectors

1 = .625 (15.88)

x: Special or Custom Versions

Lower Connector Filter Capacitance

same as Upper Connector Filter

Capacitance Designation

2 = .750 (19.05)

Upper Connector Conﬁguration (Size and Style)

EP: 9 pin

ES: 9 socket

AP: 15 pin

BP: 25 pin

BS: 25 socket

CP: 37 pin

Upper Connector Filter Capacitance

50 pF

180 pF

330 pF

470 pF

820 pF

1,000 pF

2,200 pF

1,200 pf

5,600 pF

47,000 pF

AS: 15 socket

CS: 37 socket

Lower Connector Conﬁguration

(Size and Style) same as Upper Connector Conﬁguration

Mounting

* For Additional Mounting Options and

Filter Capacitance - Consult Factory

2: .120 (3.05) Diameter Through Hole on Flanges

4: 4-40 Threaded Inserts on Flanges

E: 4-40 Hex Jack Sockets (supplied loose)

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

Ordering Information

FCC1 7

ORDERING INFORMATION - D-SUB

FCC17 - B25 - S - C - 4 - 4 - 0 - G

Series Designation

Specials

No Digit: Standard 15µ" (0.38µm) gold

G: 50µ" (1.27µm) gold

Size

E09, A15, B25, C37

K: 30µ" (0.76µm) gold

L: Standard Connector

with added ferrite block

Connector type

A - Adapter P - Pin S - Socket

Modiﬁer

0 = Standard Product

Termination Type

(Boardlocks on Right Angle D-Subs)

B = Metal Mounting Brackets,

for Right Angle D-Subs

A - Right Angle PC Tail, .318 (8.08) Footprint

B - Right Angle PC Tail, .405 (10.29) Footprint

C - Right Angle PC Tail, .590 (14.99) Footprint

D - Pin/Socket Adapter

E - Vertical Mount PC Tail

M - Solder Cup

N - Vertical Mount PC Tail -

Long Body

D = .315 (8.00) to Boardlock

for .590 (14.99) footprint

Mounting options*

E = Plastic Bracket - No Boardlock

F = No Boardlock, No plastic or metal Bracket -

Alignment Strip Only

A: 4-40 Threaded PC Tail Standoffs with

Boardlock, Vertical Mount Only

E: 4-40 Hex Jack Sockets (supplied loose)

F: 4-40 Round Fixed Jack Sockets

2: .120 (3.05) diameter Through hole

3: Self-Locking 4-40 Threaded Inserts

4: 4-40 Threaded Inserts (Standard)

5: 4-40 Threaded Stand-Offs, Vertical Mount

6: M3 Threaded inserts

X = Specials or Custom Versions

Filter Capacitance (pF)*

D: 50

5: 1,000 pF

7: 1,200 pF

E: 2,200 pF

9: 5,600 pF

8: 47,000 pF

B: 100

0: 180

F: 330

1: 470

4: 820

* For Additional Mounting Options and

Filter Capacitance - Consult Factory

ORDERING INFORMATION - COMBO D-SUB

FCC17 - A - 3W3 - P - M - 4 - 5 - 0 - G

Series Designation

Plating Option

Blank = Standard 30µ" (0.76µm) gold

G = 50µ" (1.27µm) gold

Shell Size

A, B, C, D, E

Modiﬁer

0 = Standard

X = Specials or Custom versions

(Consult Factory)

Arrangement

Connector type

A = Adapter, P = Pin, S = Socket

Filter Capacitance (pF)

1000 pF

1200 pF

2200 pF

5600 pF

47000 pF

Termination type

D = Pin/Socket Adapter

E = Power PC Tail – 40A - .126 (3.20) Dia., .175 (4.44) Lg.

K = Power Solder Cup – 10A – Wire Size 16

L = Power Solder Cup – 20A – Wire Size 12

M = Power Solder Cup – 40A – Wire Size 8

R = Power Press Fit – 20A - .145 (3.68) Lg. - .126 (3.20) Dia. Hole

100 pF

180 pF

330 pF

470 pF

820 pF

Mounting Options

2 = .120 (3.05) dia. mounting holes 5 = 4-40 Standoffs - PC tail only

* For Additional Mounting Options and

Filter Capacitance - Consult Factory

3 = 4-40 Threads Self locking

4 = 4-40 Threads

6 = M3 Threads

E = 4-40 Hex Jack Sockets (supplied loose)

INCHES (MM)

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

D’Sub Metallic Hoods

DTZK & DVZK series

Amphenol metallic hood

• Material and plating:

Zinc die-cast, nickel plated

series for D’Sub connectors offers

protection from magnetic and radio

interference to cable assemblies.

• Cable strainrelief:

Steel fiber reinforced Polycarbonate UL94V-O

Easily assembled these hoods are

suitable for all industrial and telecom

applications.

• Temperature range:

-40˚C to 120˚C

• Cable diameter:

3 to 13mm

• Attenuation factor:

> 40 dB between 30 MHz and 1 GHz

• Approvals:

VDE 0871 - FCC 20780 - 89 / 336 / EU

Shield

Your cable

assemblies!

• Industrial

• Military

• Telecom

• Any application requiring

EMI/RFI protection

DTZK Series

47.4

(1.866")

Metal or

Plastic knob

Part number

(.827”)

38.3

(1.508”)

L17DTZK9Kxx

39.5

(1.555”)

40.5

(1.594”)

L17DTZK15Kxx

L17DTZK25Kxx

L17DTZK37Kxx

54.4

(2.144”)

47.3

(1.862”)

70.9

(2.791”)

52.2

(2.055”)

xx = Blank for plastic knob and FM for metal knob

DVZK Series

29.8

(1.173")

14.5 (.571")

Part number

(1.220”)

36,2

(1.425”)

L17DVZK9Kxx

L17DVZK15Kxx

39,5

(1.555”)

40,2

(1.583”)

53,2

(2.094”)

40,2

(1.583”)

9 Size equipped with

only one screw

L17DVZK25Kxx

L17DVZK37Kxx

69,7

(2.744”)

40,2

(1.583”)

xx = Blank for plastic knob and FM for metal knob

Assembly Instructions DTZK Series

Type

L17DTZK9Kxx

L17DTZK15Kxx

(1.181”)

L17DTZK25Kxx

L17DTZK37Kxx

(1.575”)

12~20mm (.472"~.787")

Assemby Instrutions DVZK Series

12 ~ 20mm

(.475 ~ .787”)

Type

L17DVZK9Kxx

L17DVZK15Kxx

(1.181”)

L17DVZK25Kxx

L17DVZK37Kxx

(1.772”)

Do not hesitate to contact us for further information

Amphenol IT & Communication Products

Block A3/A4, The 4th Industrial District of

Industrial Headquarters, Dong Keng Road

Gong Ming Town, Shen Zhen China

Fax:+86(0)755 2754 9955

Technical Support

Tel:+86(0)755 2717 7945

Info-dsub@amphenol.com.cn

http://www.dsubconnector.com

Plastic Backshell

ACCESSORIES

SPECIFICATIONS:

Housing Material:

Grommet Material:

Mounting Hardware:

Styrene (UL 94 VO)

Polypropylene

Steel, clear zinc ﬁnish *RoHS Compliant

Amphenol’s black plastic backshell

accommodates most standard and

high-density D-Subminiature

connectors and is appropriate

for most cable assemblies.

0.475

12.06

This version is economical and

highly durable. The split-grommet

insert provides cable strain relief

while making it easy to assemble.

DIMENSIONS AND ORDERING INFORMATION

Shell

Size

Standard #

of Contacts

Hi-Density #

of Contacts

Part

Dimensions

Cable Diameter Range

Minimum

Maximum

1.217

1.547

0.640

0.400

0.984

0.210

(5.33)

0.210

(5.33)

0.230

(5.84)

0.350

(8.89)

0.350

(8.89)

0.350

(8.89)

0.350

17E-1724-1

17E-1725-1

17E-1726-1

17E-1727-1

17E-1728-1

(30.91) (39.29) (16.26) (16.26) (10.16) (24.99)

1.545 1.505 0.640 0.640 0.400 1.312

(39.24) (38.23) (16.26) (16.26) (10.16) (33.32)

2.090 1.655 0.710 0.640 0.522 1.857

(53.08) (42.04) (18.03) (16.26) (13.26) (47.17)

2.734 1.830 0.906 0.640 0.726 2.500

(69.44) (46.48) (23.01) (16.26) (18.44) (63.50)

2.645 1.855 0.940 0.770 0.726 2.406

(67.18) (47.12) (23.88) (19.56) (18.44) (61.11)

(8.89)

0.450

(11.43)

0.640

(16.26)

0.640

(16.26)

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

Plated Plastic Backshell

ACCESSORIES

SPECIFICATIONS:

Housing Material:

Plating:

Grommet Material:

Mounting Hardware:

ABS Polymer

Nickel over copper

PVC (UL 94 VO)

Steel, clear zinc ﬁnish *RoHS Compliant

ASSEMBLY INSTRUCTIONS

1. Select the tightest insert that will ﬁt over the cable and thread the cable

through it, placing the end with the smaller O.D. (the end without the

washer) towards the connector.

2. Cut the jacket, fold the shielding back over the outside of the insert

and cut it just short of the washer.

Amphenol’s plated plastic backshell

accommodates most standard and

high-density D-Subminiature

connectors and is appropriate

for cable assemblies requiring

compliance to FCC 20780.

3. Install jackscrews and connector.

4. Place the washer in the outermost depression in the exit area

of the hood and screw the cover closed.

This version is highly durable

and provides EMI/RFI protection.

The rubber grommet compression

insert forces the cable’s shielding

against the inside of the cable exit

area, assuring shielding.

DIMENSIONS AND ORDERING INFORMATION

Shell

Size

Standard #

of Contacts

Hi-Density #

of Contacts

Part

Dimensions

Cable Diameter Range

Minimum

Maximum

1.217

1.547

0.640

0.400

0.984

0.210

(5.33)

0.210

(5.33)

0.230

(5.84)

0.350

(8.89)

0.350

(8.89)

0.320

(8.13)

0.320

17E-1724-2

17E-1725-2

17E-1726-2

17E-1727-2

17E-1728-2

(30.91) (39.29) (16.26) (16.26) (10.16) (24.99)

1.545 1.505 0.640 0.640 0.400 1.312

(39.24) (38.23) (16.26) (16.26) (10.16) (33.32)

2.000 1.655 0.710 0.640 0.522 1.857

(50.8) (42.04) (18.03) (16.26) (13.26) (47.17)

2.730 1.830 0.906 0.640 0.726 2.500

(69.34) (46.48) (23.01) (16.26) (18.44) (63.50)

2.645 1.855 0.940 0.440 0.726 2.406

(67.18) (47.12) (23.88) (11.18) (18.44) (61.11)

(8.13)

0.450

(11.43)

0.650

(16.51)

0.650

(16.51)

INCHES (MM)

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

45º Plated

Plastic Backshell

ACCESSORIES

SPECIFICATIONS:

Housing Material:

Plating:

Grommet Material:

Mounting Hardware:

ABS Polymer

Nickel over copper

PVC (UL 94 VO)

Steel, clear zinc ﬁnish *RoHS Compliant

ASSEMBLY INSTRUCTIONS

1. Select the tightest insert that will ﬁt over the cable and thread the cable

through it, placing the end with the smaller O.D. (the end without the

washer) towards the connector.

2. Cut the jacket, fold the shielding back over the outside of the insert

and cut it just short of the washer.

Amphenol’s plated plastic backshell

accommodates most standard

and high-density D-Subminiature

connectors and is appropriate

for cable assemblies requiring

compliance to FCC 20780.

3. Install jackscrews and connector.

4. Place the washer in the outermost depression in the exit area

of the hood and screw the cover closed.

This version is highly durable

and provides EMI/RFI protection.

The rubber grommet compression

insert forces the cable’s shielding

against the inside of the cable exit

area, assuring shielding. The 45°

cable exit helps save space behind

equipment.

DIMENSIONS AND ORDERING INFORMATION

Shell

Size

Standard #

of Contacts

Hi-Density #

of Contacts

Part

Dimensions

Cable Diameter Range

Minimum

Maximum

1.217

1.430

0.640

0.400

0.984

0.210

(5.33)

0.210

(5.33)

0.230

(5.84)

0.350

(8.89)

0.320

(8.13)

0.320

(8.13)

0.450

(11.43)

0.650

(16.51)

17E-1824-2

17E-1825-2

17E-1826-2

17E-1827-2

(30.91) (36.32) (16.26) (16.26) (10.16) (24.99)

1.545 1.568 0.640 0.640 0.400 1.312

(39.24) (39.83) (16.26) (16.26) (10.16) (33.32)

2.090 1.735 0.710 0.640 0.522 1.857

(53.09) (44.07) (18.03) (16.26) (13.26) (47.17)

2.734

1.976

0.906

0.640

0.726

2.500

(63.5)

(69.44) (50.19) (23.01) (16.26) (18.44)

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

Two-Piece Die Cast

Shielded Backshells

ACCESSORIES

SPECIFICATIONS:

Housing Material:

Grommet Material:

Mounting Hardware:

Die cast zinc

PVC (UL 94 VO)

Steel, clear zinc ﬁnish *RoHS Compliant

ASSEMBLY INSTRUCTIONS

1. Select the tightest insert that will ﬁt over the cable and thread the cable

through it, placing the end with the smaller O.D. (the end without the

washer) towards the connector.

2. Cut the jacket, fold the shielding back over the outside of the insert

and cut it just short of the washer.

Amphenol’s metal backshell

accommodates most standard

and high-density D-Subminiature

connectors and is appropriate

for cable assemblies requiring

compliance to FCC 20780.

3. Install jackscrews and connector.

4. Place the washer in the outermost depression in the exit area

of the hood and screw the cover closed.

This version is highly durable

and provides EMI/RFI protection.

The rubber grommet compression

insert forces the cable’s shielding

against the inside of the cable exit

area, assuring shielding.

DIMENSIONS AND ORDERING INFORMATION

Shell

Size

Standard #

of Contacts

Hi-Density #

of Contacts

Part

Dimensions

Cable Diameter Range

Minimum

Maximum

1.217

1.430

0.640

0.400

0.984

0.210

(5.33)

0.210

(5.33)

0.230

(5.84)

0.350

(8.89)

0.320

(8.13)

0.320

(8.13)

0.450

(11.43)

0.640

(16.26)

17E-1657-09

17E-1657-15

17E-1657-25

17E-1657-37

(30.91) (36.32) (16.26) (16.26) (10.16) (24.99)

1.545 1.568 0.640 0.640 0.400 1.312

(39.24) (39.83) (16.26) (16.26) (10.16) (33.32)

2.090 1.735 0.710 0.640. 0.522 1.857

(53.09) (44.07) (18.03) (16.26) (13.26) (47.17)

2.734 1.976 0.906 0.640 0.726 2.500

(69.44) (50.19) (23.01) (16.26) (18.44) (63.5)

INCHES (MM)

TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM

L77DAH15SVF2 [AMPHENOL]

相关型号：

L77DB25PF179

L77DB25PST1

L77DB25PST2

L77DB25PST3

L77DB25PST4

L77DB25S

L77DB25S1AMNRM6

L77DB25S1AMNVF

L77DB25S1AUNVF2

L77DB25SAJ4VF2

L77DB25SAM4BRM6

L77DB25SARM6