M39029/102-558 [AMPHENOL]
Connector Accessory;
| 型号： | M39029/102-558 |
| 厂家： | 
Amphenol |
| 描述： | Connector Accessory 连接器 连接器支架 军用连接器配件 |
| 文件： | 总56页 (文件大小：5154K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Amphenol
HighFrequencyContacts
TABLE OF CONTENTS
• Overview of Amphenol’s High Frequency Contacts ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 213-217
• Cable Systems, Cable Assembly/Testing of Cables ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 218
• Cable Usage Guide ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 219-222
CONCENTRIC
TWINAX
MIL-DTL-38999 Circular Connector Overview ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 223
Contacts for MIL-DTL-38999 Connectors:
COAXIAL
• Quadrax Contacts ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 224-226
• New “Split-Pair” Quadrax Contacts ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 227-230
• Differential Twinax Contactsꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 231, 232
Compliant Quadrax and PC Tail Quadrax Contacts ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 233
• Quadrax Transition & Differential Twinax Transitional Adapters ꢀ ꢀ ꢀ 234-237
• Micro D-Twinax Transition Adapters ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 238-240
• Insert Arrangements for MIL-DTL-38999, Series III ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 241, 242
• How to Order, 38999 Series III with Quadrax 100 ohm Contacts ꢀ ꢀ ꢀ ꢀ 243
• Coaxial Contacts ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 244-247
• Matched Impedance Coaxial Contacts ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 248
• Typical Contact Installation Instructions for Coax Contacts ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 249
• High Frequency Contacts (DC to 40 GHz) ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 250
• Twinax Contacts ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 251-253
• Triax Contacts ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 254
• Coax, Twinax & Triax PC Tail Contacts ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 255-257
• Insert Arrangements for MIL-DTL-38999 Series III Incorporating Coax,
Twinax and Triax Contacts ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 258-260
“SPLIT-PAIR”
QUADRAX
CONTACT &
CABLE
New
Featured
MICRO D-TWINAX
TRANSITION ADAPTERS
TWINAX
PC TAIL
TRIAX
Standard MIL-DTL-5015 & Heavy Duty MIL-DTL-22992 Circular
Connector Overviewꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 261
Contacts for Standard MIL-DTL-5015 & Heavy Duty
DIFFERENTIAL
TWINAX
QUADRAX
MIL-DTL-22992 Connectors:
• Coaxial Contacts ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 262, 263
• Insert Arrangements for Standard MIL-DTL-5015 and Heavy Duty
MIL-DTL-22992 Incorporating Coax Contacts ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 264
• Rectangular Rack & Panel Connectors that incorporate High Speed ꢀ 265, 266
• Guide for Selecting High Frequency Contacts and Cablesꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 267
High Frequency ContactsTypical Markets:
• Military & Commercial Aviation
• Military Vehicles
• Missiles & Ordnance
• C4ISR
Amphenol
Aerospace
212
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Amphenol® High Frequency Contacts
Provide High SpeedTransmission
Amphenol
Operate in High Frequency Conditions
38999
III
When you need superior electrical performance plus shielding to eliminate
interference from outside electrical sources in a connector, Amphenol has the
most reliable contact solutions.
HD
Dualok
Amphenol offers a very wide range of contacts that provide high speed transmission and operate
in high frequency conditionsꢀYou can be assured of interconnection compatibility when you come
to Amphenol for your contact needs as well as your connector needsꢀAmphenol’s expertise in
interconnection solutions assures that your contacts will mate properly and will perform to the
application specifications of your particular requirementsꢀ
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
MIL-DTL-38999 CONNECTORS - The high performance series most ideal for integrating high
speed and high frequency contacts. MIL-DTL-38999, Series I, II and III are by far the choice of
connector for today’s avionics needs - these subminiature family connectors are ideally suited for
the incorporation of shielded contacts.
This catalog section is primarily devoted to the high speed and high frequency contact options for
use in MIL-DTL-38999 Connectors, which include:
HIGH
SPEED
Fiber
Coaxial
Concentric
Twinax
Triax
Quadrax
Differential
Twinax
High
Frequency
Transition
Adapters
Optics
Pin and socket Pin and socket
Pin and socket
designed for
Size 8 pin and socket Size 8 pin and socket Size 8 Coaxial
Matched impedance
Contacts
Connectors
Cables
contacts
contacts designed for contacts
contactsꢀAn outer
contact with 4
strategically spaced
inner contacts
forming two 100 or
150 Ohm matched
contactsꢀAn outer
contact with 2 inner
contacts spaced to
form one 100 or 150
Ohm matched
contacts that provide quadrax and twinax
high frequencies (DC transition adapters
to 40 GHz)ꢀUnique
“Float Mount”
technology maintains high speed
tight mechanical
tolerancesꢀ
designed for
protection from
RF/microwave magnetic and electro- shielded wire
provide a method of
launching from the
and shielded
wire applica-
tionsꢀSizes 4,
8, 12 & 16
static interference
including nuclear
electromagnetic
pulseꢀSizes 8 & 12
applications
with 3
conductorsꢀ
impedance
connectors to PCB
boardsꢀ
Sizes 8, 10 & 12 impedance
differential pairꢀ
differential pairsꢀ
See High Frequency
Contact Designer’s
Guide at end
Other series of connectors from Amphenol Aerospace, in addition to
38999 connectors, can incorporate shielded contactsꢀThese include the following
(and are also covered in this catalog section):
of this catalog.
• Amphenol® Heavy Duty Circular Connectors, MIL-DTL-22992 - with coax contactsꢀ
• Amphenol® Printed Circuit Board Connectors - Rectangular connectors with
standard low mating force brush contacts can have hybrid arrangements with coax contactsꢀ
• LRM Interconnects - Rectangular module and backplane connectors with standard
low mating force brush contacts can have hybrid arrangements with coax contactsꢀ
• Amphenol® ARINC 600 and R27 Rack & Panel Connectors are available with quadrax, coax,
twinax and differential twinax contactsꢀ
The Cable Usage Guide is a key reference to help guide you in selecting the contacts best suited to
your needsꢀSince most shielded wire applications start with a fixed requirement for cable types, the
guide refers you to the Amphenol connector family utilizing contacts which are compatible with the
cable characteristicsꢀ
For more information on other Amphenol connectors with shielded contacts:
• Amphenol® Circular Connectors, MIL-DTL-26482, Series 1 are available with coaxial
contacts, size 8 and 12 for crimp and solder typeꢀSee catalog 12-070 on-line at wwwꢀ
amphenol-industrialꢀcom, or consult Amphenol Industrial Operationsꢀ
• Amphenol® MS/Standard, MIL-DTL-5015 Circular Connectors
are available with size 4, 8 and 12 coax contactsꢀ Consult
Amphenol Industrial Operations for more information or on-line at
wwwꢀamphenol-industrialꢀcomꢀ
For more information on connectors with fiber optics see the Fiber Optic
section of this catalog or consult Amphenol Aerospaceꢀ
Amphenol provides the latest technology in high speed contacts - differ-
ential twinax and quadrax contacts, size 8, for use in MIL-DTL-38999
Special* Circular Connectorsꢀ
*Requires modified connector to accommodate keyed contactsꢀ
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
213
High Speed Quadrax and
New Products/DifferentialTwinax Contacts
Overview
Amphenol
Aerospace
38999
NEW“Split-Pair”Quadrax Contacts & Cable Assemblies for
MIL-DTL-38999, Series III Circular
Amphenol Aerospace offers the high performance interconnect solution for CAT6A type cableꢀ
APPLICATIONS:
III
HD
Dualok
II
I
•
•
•
•
•
•
•
10/100/1000/10GBASE-T Ethernet
DVI
USB 2ꢀ0
Serial Rapid IO (up to 3ꢀ125 Gbps)
PCI-Express 2ꢀ0
HDMI 1ꢀ3a
MIL-DTL-38999 Series III
Connectors
with “Split-Pair” Quadrax Contacts
for use with CAT6A Type Cable
SJT
Accessories
Aquacon
Herm/Seal
PCB
New/Featured
SATA 2ꢀ0 (up to 3 GHz)
See pages 227, 228 for more information
Micro D-TwinaxTransition Adapters
Differential Twinax and Quadrax
contacts provide high data
transfer rates, low power
consumption, and excellent EMI
capability. They offer controlled
impedance of 100 or 150 Ohm
and are ideal for use in harsh
environments.
HIGH
Amphenol now offers differential twinax transition
adapters in smaller sizes that provide
matched impedance interconnection to PCB boardsꢀ
STYLES INCLUDE:
SPEED
Fiber
Optics
•
•
•
Plug- standard length and extended length options
Straight PCB receptacle, 90° PCB receptacle
Two jam nut receptacle styles -both with standard
length and extended length options
Contacts
Connectors
Cables
•
Bushing assemble 90° adapter (used with plug or
jam nut receptacle)
See pages 238-240 for more information
DIFFERENTIAL
TWINAX CONTACTS
High speed Differential Twinax contacts consist
of an outer contact with two inner contacts
spaced to form one 100 or 150 Ohm controlled
impedance differential pairꢀSee pages 231, 232
for performance data and ordering of Differential
Twinax contacts, and consult Amphenol
Aerospace for more informationꢀ
DifferentialTwinax Contact
D38999 Series III
Ground Plane
Connectors with
Quadrax PCB
Socket contacts
QUADRAX CONTACTS
• High speed Quadrax contacts consist of
an outer contact with four inner contacts
spaced to form two 100 or 150 Ohm
controlled impedance differential pairꢀ
• Both contacts, when used in Amphenol
MIL-DTL-38999 Series III and ARINC
type connectors, provide an excellent
alternative for harsh environment
applications such as:
D38999 Series
III with Quadrax
and Power
Contacts
Quadrax Contact
• Ethernet 100 Base-T-100 Ohm
• Gigabit Ethernet 1000 Base-T-100 Ohm
• Fibre Channel-150 Ohm
D38999 Series III
• IEEE1394B FireWire-110 Ohm
Connectors (standoff shell at right
and standard shell below) with
Quadrax
Differential Twinax and Quadrax contact options include:
• Crimp or printed circuit board termination
PC Tail Contacts
• Established designs to accommodate a variety of cable types and gages
• Ground plane connectors can incorporate quadrax contactsꢀThese
connections have conductive inserts that ground the outer conductor of
the contact body to the shell of the connectorꢀThey accommodate size 8
and 12 shielded contacts of which the size 8 can be quadrax typeꢀ
See pages 224-226 for performance data of Quadrax contactsꢀConsult Amphenol
Aerospace for further information neededꢀ
* Requires modified connector to accommodate keyed contactsꢀ
214
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Quadrax Contacts,QuadraxTerminators,
Transition Adapters
Amphenol
Overview
38999
QUADRAX CONTACTS
FOR ARINC
III
HD
Dualok
Board Level
CONNECTORS
Connector
with Compliant
Quadrax
Amphenol ARINC 600 Rack and Panel
connectors can incorporate high speed
II
Quadrax Contact for
ARINC Connectors
quadrax contacts as well as coax, twinax
and differential twinax contactsꢀR27 Rack
and Panel connectors use the same
I
Contacts
SJT
contacts as ARINC 600 connectorsꢀ For
more information about rack and panel
connectors contact Amphenol Aerospaceꢀ
Accessories
Aquacon
Herm/Seal
PCB
BOARD LEVEL
CONNECTORSWITH
COMPLIANT QUADRAX
HIGH
SPEED
CONTACTS
Fiber
Amphenol also provides compliant
quadrax socket contacts and quadrax pin
contacts with PC tails for attaching to
printed circuit boardsꢀSee page 233 for
more informationꢀ
Optics
Compliant Quadrax Socket and
PCBTail Quadrax Pin
Contacts
Connectors
Cables
FEED-THROUGH CONNECTOR
WITH QUADRAX CONTACTS
Amphenol’s feed-through connector is
double-ended for through bulkhead applic
Consult Amphenol for more informationꢀ
traight Quadrax
eceptacle Contact
90° Quadrax Receptacle
and Plug Transition
Adapter
QuadraxTerminators
Amphenol offers a terminator assembly which is a
low reactance, resistive impedance match to the
characteristic impedance of a transmission lineꢀIt
is used to terminate the far ends of a transmission
line or an open tap so that the energy from signals
traveling down the transmission line is absorbed
within the resistor and not reflected back down the
transmission line causing signal interference
(noise)ꢀConsult Amphenol for more informationꢀ
QuadraxTerminator
90° Differential Twinax
Receptacle and Plug
Transition Adapter
Transition Adapters
In conjunction with its Differential Twinax and Quadrax contacts, Amphenol
has developed a full line of Transition Adapters in order to facilitate launching of
controlled impedance signals to printed circuit boardsꢀThese use differential twinax
or quadrax 90° or straight receptacles and they can be either threaded or cable to
board directꢀThe threaded transition adapters provide an ideal method of
disconnecting the differential twinax or quadrax connector from the boardꢀ
See pages 234-240 for further description, performance data and ordering of
transition adaptersꢀ
Amphenol’s newest addition to their high speed interconnect product offering is Micro
D-Twinax Transition adaptersꢀSee page 238-240 for more informationꢀ
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
215
High Speed Coax andTwinax Contacts
Overview
Amphenol
Aerospace
38999
Optional choices, other than standard crimp or solder 500 cycle and 1500 cycle
contacts, are often required for high frequency interconnectionsꢀAmphenol offers
shielded contacts for RF applications as well as balanced high sensitivity circuitsꢀ
III
HD
Amphenol® Shielded Contacts
provide design versatility for
electrical circuitry. Shielded contacts
are used to eliminate interference
from outside electrical sources,
when standard crimp or solder contacts
are not enough.
Dualok
SHIELDED COAXIAL
II
I
CONTACTS
High speed Coax contacts within a
connector provide the shielding
protection, and many cases the
RF/microwave performance,
needed in the circuitry of many
applicationsꢀ
SJT
Accessories
Aquacon
Herm/Seal
PCB
Shielded Coax Contacts
All popular series of Amphenol circular connectors
and many rectangular connectors are available with coax contactsꢀDiameters are
standardized in sizes 4, 8, 12 and 16 so that coaxial contacts may be interchanged
with power contacts in connector arrangements which include those sizesꢀPopular
RG cable types and a variety of other commercial coaxial cables can be accommo-
datedꢀSee page 244 for coax contact performance dataꢀMatched impedance size 12
coax contacts are also available (see page 248)ꢀThe use of coax contacts within a
connector, compared to the use of individual coaxial/shielded connectors, offers
advantages of savings in space and weight and no cross-mating difficultiesꢀCoax and
standard contacts may be mixed within the connector to meet special signal needsꢀ
The connector itself offers further protection and environmental integrity through the
grommets and seals used, and coaxial junction is protected by the connector
outer shellꢀ
HIGH
SPEED
MIL-DTL-38999
Connector with
High Speed
Fiber
Optics
Contacts
Connectors
Cables
Coax Contacts
CONCENTRIC
TWINAX
Size 8
Coax
Pin Contact
SHIELDED
CONTACTS
High performance shielding
capabilities are available with
Concentric Twinax contactsꢀThese
are designed for protection from
magnetic and electrostatic
ConcentricTwinax Contacts Size 8
interference including nuclear
electro-magnetic pulseꢀ The contact
is crimp terminable to twisted
shielded cable and is fully scoop-
proof (recessed pins) in MIL-
DTL-38999 connectorsꢀThe
Concentric Twinax
Size 12 Contacts
concentric twinax contact is
engineered to maintain shield
integrity through a multi-pin circular
connector and does not require
contact polarization within the
insertꢀSize 8 concentric twinax
contacts were developed for use in
MIL-STD-1553B Airborne multiplex
data bus applicationsꢀIdeal for this
MIL-DTL-38999
Connector with
Concentric Twinax
Contacts
MIL-DTL-38999 Lanyard“Breakaway”
application need is the high
performance Tri-Start connector
with its fully scoop-proof feature of
Connector with ConcentricTwinax
Contacts, Qualified for MIL-STD-1760
recessed pinsꢀ
The concentric twinax contact is crimp terminable to twisted shielded cableꢀSize 12
concentric twinax contacts were developed for SAABꢀThey can be used in any size
12 cavity of D38999 I, II or III or SJT connectorꢀ
Size 8 & 12 coax, triax or twinax contacts or size 16 coax contacts are available in
Ground Plane Connectors (See photo preceding page)ꢀThese are
MIL-DTL-38999 Series III connectors for data bus, LAN and coax/triax/twinax
transmission lines with conductive inserts that ground the outer contact conductor to
4
the shellꢀThey are sold “less contacts”
216
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Coax Contacts with High Frequency Range
Amphenol
DC to 40 GHz
Overview
38999
HIGH FREQUENCY
COAX CONTACTSWITH
“FLOAT MOUNT”
III
HD
Dualok
HF38999 - D38999 Connectors
TECHNOLOGY
with High Frequency
Coax Contacts
II
Amphenol Aerospace now offers DC to
40 GHz size 8 coaxial contacts for the
D38999 housing and standard insertsꢀ
These contacts can be terminated to a
multiple of cable types depending on the
applicationꢀ
By using standard interfaces that are based on MIL-STD-348 and can be installed in
any D38999 size 8 insert, Amphenol has transformed the circular connector industryꢀ
This technology expands the use of D38999 connectors to include the microwave
transmission lines within the multi-port configuration without change to a custom
connectorꢀ
The high frequencies are maintained by Amphenol’s unique “Float Mount” technologyꢀ
This technology allows for consistent microwave performance while maintaining tight
mechanical tolerancesꢀThis consistency provides superior electrical performance
and, unlike other blindmate connectors, will maintain an accurate phase length when
matedꢀSee page 250 for specifications, performances and ordering of this contactꢀ
I
High Frequency Size 8 Coax
Contacts with“Float Mount“
SJT
Technology
Accessories
Aquacon
Herm/Seal
PCB
HIGH
SPEED
Fiber
Optics
Contacts
Connectors
Cables
Twinax Contacts for Printed
Circuit Board Applications
PCTAILTWINAX
CONTACTS
D38999 Connectors
with PC Tail
Twinax
Amphenol provides Printed Circuit
Tail Twinax contacts for MIL-
DTL-38999 Series I and III circular
connectors and also for ARINC
404 and ARINC 600 rectangular
connectorsꢀHigh reliability is
assured with factory pre-assem-
bled contacts and standardized
termination to the boardꢀ
Contacts
Variety of PCTailTwinax Contacts
See pages 255-257 for performance data and ordering of PC tail twinax contacts, and
consult Amphenol Aerospace for further information neededꢀAlso see the Printed
Circuit Board and the Series I, II, III section for MIL-DTL-38999 connectorsꢀ
Printed Circuit Twinax Contacts provide
a cost effective packaging solution for
limited space applications where
connectors are attached to printed
circuit boards.
ShieldedTriax Contacts
TRIAX CONTACTSWITH
Rail Launch MIL-STD-1760
Connector with
Triax Contacts
THREE CONDUCTORS FOR
USEWITHTRIAX CABLE
Amphenol supplies sizes 8, 10 and 12
triax contacts for use in MIL-DTL-38999
Series I, II and III connectorsꢀTriax con-
Triax Contacts
tacts provide additional shielding when terminated to triax
cable having solid or stranded center conductorsꢀSee cable compatibility in
the Cable Usage Guide and performance data and ordering of triax contacts
on pages 254-257ꢀEach of the three conductors of the triax contact is separated by
dielectric insulation to isolate ground planes and to improve shielding
effectivenessꢀAll conductors are crimp terminated for high reliability and ease of
assemblyꢀTriax contacts may be specified for direct connection to printed circuit boardsꢀ
For maximum system flexibility, triax contacts may be mixed
with coax, twinax and power contacts in a single connectorꢀ
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
217
Cable Systems with High Frequency Contacts
Cable Assembly Capabilities/Testing of Cables
Amphenol
Aerospace
38999
CABLE ASSEMBLY CAPABILITIES
Amphenol provides a large array of cable assemblies with
high speed quadrax and differential twinax contacts, as well as
coax and concentric twinax contactsꢀThis page shows a few exam-
plesꢀThe Cable Usage Guide pages that follow list the design
possibilities for these high speed contactsꢀ
III
HD
Dualok
II
I
SJT
Amphenol strives to offer customers the widest range of cable
assemblies, keeping abreast of the latest cable types in the market-
placeꢀPlease consult with the contact product managers at Amphenol
Aerospace for assistance in designing the cable assembly that suits
your particular needsꢀFrom a simple one-cable interconnection, to a
multiple cable system, Amphenol can design and supply your cable
needs for high frequency contacts and connectorsꢀSee the High
Frequency Contact Designer’s Guide at the end of this catalog sectionꢀ
Accessories
Aquacon
Herm/Seal
PCB
Eight Wire Gigabit Ethernet Assembly
HIGH
SPEED
Fiber
Optics
Contacts
Connectors
Cables
Quadrax Contact with 8P8C “RJ45”
Jack Ethernet Assembly
Quadrax Cable Assembly can
be attached to any
connector application
Variety of Quadrax Cable Assemblies
TESTING OF CABLES
Rigid testing is performed 100% on cable assemblies at Amphenol
before they are shipped to make sure they meet customer requirementsꢀ
These requirements include tests such as DWV, resistance and
continuityꢀAmphenol has the background experience and understanding
of harsh environmental testing to assure reliable “end-to-end”
interconnect solutionsꢀ
Quadrax Cable Assembly
attached to Board Level
Compliant Quadrax Connec-
tor
218
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Cable Usage Guide
Amphenol
38999
Use the Cable Usage Guide on pages 219-222 as follows:
III
1ꢀ Locate the cable you are using in Cable Type columnꢀFor cables not listed consult Amphenol Aerospaceꢀ
2ꢀ Refer to the Amphenol Connector section which features contacts/adapters for this cableꢀConnector size, performance
features and insert pattern availability may influence your choiceꢀ
3ꢀ Order your connector and contacts or transition adapters by following the procedure given in the section for the connector
series selectedꢀThese instructions are supplemented by the Amphenol Catalog Section covering the basic connectorꢀ
HD
Dualok
II
I
SJT
Quadrax Contacts
CABLE USAGE GUIDE
D38999 Series III* Connectors
DifferentialTwinax Contacts
CABLE USAGE GUIDE
D38999 Series III* Connectors
Accessories
Aquacon
Herm/Seal
PCB
Nominal
Impedance
(ohms)
Nominal
Impedance
(ohms)
Cable Type
F-4703-3
Cable Type
Tensolite
26463/70460X-2
98
HIGH
F-4703-4
F-4704-5
ST5M1284-003
Draka Fileca 2709-3
Draka Fileca
SPEED
F-47-4-6
ET2PC236
ET2PF870
E50424
E50426
E51424
NF22Q100
NF24Q100
NF24Q100-1
NF24Q100-01-200C
NF26Q100
NF26Q100-1
NF26-2Q100
24443/03130X-4(LD)
24443/03166X-4(LD)
24443/9P025X-4(LD)
23450/04090X-4 (LD)
24443/C20714X-4(LD)
RCN7688
PIC Wire
E10224
Fiber
Optics
NF24T100-200C Space
23460/05114X-2(LD)
24463/03220T-2(LD)
24463/05099X-8(LD)
26453/03184X-2(LD)
24463/9P025X-2(LD)
0026A0024, 0024G0024
Filotex
Contacts
Connectors
Cables
Tensolite
PIC Wire
Tensolite
Gore
100
Raychem
S280W502-6
JSFY11-24
Gore
GSC-05-827300-00
956-6262, 956-1T200
12814
MX 100-24
26483/03071X-2(LD)
100
Thermax
Tensolite
150
QuadraxTransition Adapters
CABLE USAGE GUIDE
D38999 Series III* Connectors
or ARINC 600 Connectors
RCN8513
RCN8672
Nominal
Impedance
(ohms)
S280W502-4
JSF-18-3
Cable Type
956-4TN
956-5
F-4703-3
Draka Fileca
F-4704-4
Themax
T956-4T200
MX100Q-24
24450/03089X-4(LD)
RCN8487
NF22Q100
NF22Q100-01
NF24Q100
NF26Q100
956-5
GSC-10-8273900
26473/02006X-4(LD)
Tensolite
100
150
Tensolite
Gore
JSFY02-1
JSF18
Tensolite
Gore
110
150
Thermax
Gore
Tensolite
26473/02006X-4(LD)
RCN8328
* Requires modified connector to accommodate keyed contactsꢀ
DifferentialTwinaxTransition Adapters
CABLE USAGE GUIDE
D38999 Series III* Connectors
or ARINC 600 Connectors
Nominal
Impedance
(ohms)
78
Cable Type
M17/176-00002
224463/9P025X-2
24463/9P025X-2(LD)
26483/03071X-2
Tensolite
100
150
Tensolite
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
219
Cable Usage Guide,contꢀ
Amphenol
Aerospace
38999
Quadrax Contacts
CABLE USAGE GUIDE
ARINC 600 Rack & Panel Connectors
DifferentialTwinax Contacts
CABLE USAGE GUIDE
ARINC 600 Rack & Panel Connectors
III
HD
Dualok
Nominal
Impedance
(ohms)
Nominal
Impedance
(ohms)
Cable Type
F-4703-3
Cable Type
II
I
ABS0386WF24
ASNE0272TK22
ASNE0272TK24
100
100
100
100
Draka Fileca
Tensolite
SJT
F-4704-5, F4704-4
NF22Q100
NF24Q100
24443/03130X-4(LD)
24443/9P025X-4(LD)
Accessories
Aquacon
Herm/Seal
PCB
100
Tensolite
24463/9P025X-2(LD)
S280W502-4
JSFY02-1
Gore
110
150
RCN8328
26473/02006X-4(LD)
HIGH
Tensolite
SPEED
Fiber
Optics
ConcentricTwinax Contacts
CABLE USAGE GUIDE
D38999 Series I, II, III & SJT Connectors
Triax Contacts
CABLE USAGE GUIDE
D38999 Series I, II, III & SJT Connectors
Contacts
Connectors
Cables
Nominal
Impedance
(ohms)
Nominal
Cable Type
Cable Type
Impedance
(ohms)
JN1088WT
5M2397-002
81264-02
JN1088WU
Gore
RG179 (Coax Cable)
Tensolite
Tensolite
Thermatics 12447
10602 (Twinax Cable)
5M2559-001
EPD32263A
EPD22189B
M17/176-00002
GSC-12-2548-00
GC875TM24H
50
75
75
75
75
75
75
75
75
77
95
95
95
95
95
95
95
95
95
75
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
78
GSC-03-81497-00
GSC-12-81095-00
28988/50823LXX-1
28988/50823LXX-1
10602
10606
10612
10613
10614
Raychem
81264-01
ST5M1323-001
Champlain
23089/RC
05A0771
T10971
7724C8664
7726D0664
782OD0111 (20 AWG)
0024G0024
5M2022-003
HS5930
S280W502-1
CXN2268
81-00700
28598/9C026LT-1
26895/90334X-1
13809
Tensolite
Teledyne
11914/1
Times AA6603
RGX179
100
100
100
100
100
ConcentricTwinax Contacts
CABLE USAGE GUIDE
ARINC 600 Rack & Panel Connectors
Nominal
Cable Type
Impedance
(ohms)
S280W502-1
100
220
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Cable Usage Guide,contꢀ
Amphenol
38999
Use the Cable Usage Guides on this page for Coax Contacts as follows:
III
1ꢀ Locate the cable you are using in Cable Type columnꢀFor cables not listed consult Amphenol Aerospaceꢀ
2ꢀ Refer to the Amphenol connector section which features contacts for this cable, as indicated by a • in the appropriate
columnꢀIf more than one connector series utilizes contacts designed for your cable, investigate each of themꢀ
Connector size, performance features and insert pattern availability may influence your choiceꢀ
HD
Dualok
3ꢀ Order your connector and coax contact by following the procedure given in the section for the connector series
selectedꢀThese instructions are supplemented by the Amphenol Catalog Section covering the basic connectorꢀ
4ꢀ The Additional Contacts column of this guide is used to indicate an additional availability of contact designs for older
cable types or capabilityꢀConsult Amphenol Aerospace for further informationꢀ
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
Coax Contacts
CABLE USAGE GUIDE
For Standard & Heavy
Duty Circular
(MIL-DTL-5015 type)
(MIL-DTL-22992 type)
Additional
Contacts
(Consult
Amphenol)
Nominal
Impedance
(ohms)
For Circular
(MIL-DTL-38999 type)
For Rectangular
Connectors
Cable Type
HIGH
RG-5B/U
RG-6A/U
(M17/073-RG212)
(M17/2-RG6)
50
75
97
50
75
75
74
53
53
50
50
75
93
93
125
93
50
50
50
50
50
95
75
50
50
50
50
70
50
50
75
95
75
50
50
95
95
50
93
50
50
75
50
50
50
50
75
•
•
•
•
•
•
•
•
SPEED
Fiber
RG-7/U
Optics
RG-9B/U
(M17/075-RG214)
(M17/6-RG11)
(M17/6-RG12)
RG-11A/U
RG-12A/U
RG-13A/U
RG-21A/U
RG-55B/U
RG-58C/U
RG-58
Contacts
Connectors
Cables
(M17/084-RG223)
(M17/028-RG058)
(M17/155-00001)
(M17/29-RG59)
•
•
•
•
•
RG-59B/U
RG-62A/U
RG-62B/U
RG-63B/U
RG-71B/U
RG-87A/U
RG-115/U
RG-115A/U
RG-116/U
RG-122/U
RG-133A/U
RG-140/U
RG-141A/U
RG-142A/U
RG-142B/U
RG-143A/U
RG-161/U
RG-174A/U
RG-178B/U
RG-179B/U
RG-180B/U
RG-187A/U
RG-188A/U
•
•
•
(M17/030-RG062)
(M17/31-RG63)
(M17/90-RG71)
•
•
•
•
•
•
•
•
(M17/054-RG122)
(M17/100-RG133)
(M17/110-RG302)
•
•
•
•
•
•
•
•
•
•
•
(M17/060-RG142)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(M17/119-RG174)
(M17/093-RG178)
(M17/094-RG179)
(M17/095-RG180)
(M17/094-RG179)
(M17/113-RG316)
•
•
RG-188 Double Braid
RG-195A/U
(M17/095-RG180)
•
•
•
RG-195 Double Braid
RG-196A/U
RG-210/U
RG-212/U
RG-214/U
RG-216/U
RG-222/U
RG-223/U
RG-225/U
RG-227/U
RG-302/U
(M17/169-00001)
•
•
•
(M17/073-RG212)
(M17/075-RG214)
(M17/77-RG216)
•
•
•
•
(M17/084-RG223)
(M17/86-RG225)
•
•
•
•
•
(M17/110-RG302)
•
CHART CONTINUES ON NEXT PAGE
NOTE:
MIL-DTL-38999 supersedes MIL-C-38999ꢀ
MIL-DTL-5015 supersedes MIL-C-38999ꢀ
MIL-DTL-22992 supersedes MIL-C-22992
NOTE: For information on coax contacts for Miniature circular con-
nectors, MIL-DTL-26482 Series 1, see catalog 12-070 and consult
Amphenol Industrial Operationsꢀ
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
221
Cable Usage Guide
Amphenol
Aerospace
38999
Coax Contacts
III
CABLE USAGE GUIDE, contꢀ
HD
For Standard & Heavy
Additional
Contacts
(Consult
Dualok
Nominal
Impedance
(ohms)
For Circular
Duty Circular
(MIL-DTL-38999 type) (MIL-DTL-5015 type)
(MIL-DTL-22992 type)
For Rectangular
Connectors
Cable Type
II
I
Amphenol)
RG-303/U
RG-304/U
RG-316/U
RD-316
Double Braid
RG-400
M/A-COM 5M2869-001
5022A1311-D
Beldon 9307
FA-19X
T-Flex-402
T-Flex-405
Filotex ET124962
JN1088WT
JN1088WU
PAN6422XQ
PAN6422XY
PAN6595XM
(M17/111-RG303)
(M17/112-RG304)
(M17/113-RG316)
50
50
50
•
•
SJT
•
Accessories
Aquacon
Herm/Seal
PCB
•
•
•
(M17/152-00001)
(M17/128-RG400)
50
50
50
50
50
50
50
50
50
50
75
50
75
75
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
HIGH
SPEED
Fiber
Optics
(Triax)
(Triax)
Contacts
Connectors
Cables
(Triax)
51-04486
81-00207
GWN1159A
CXN3403
Haveg
Gore
Times
Teledyne
AA3248
11299
5021D1331-0
5021D1331-9
5022D1312-9
7527A1318
9527A1314
9528A1318
9530A5314
9530D5314
2929-29
30850/87T-1
50C-25A-DS-1
ESC352001
ESC432101
50
50
50
75
95
95
95
95
Raychem
Thermatics
Tensolite
Thermax
50
50
For Cable not found in the Coax Contact Cable Usage Guide, refer to these general dimensional ranges:
(In general, for D38999 Connectors, the size 8, 12 and 16 Coax Contacts will terminate cable in the following ranges )
SIZE 16
SIZE 12
ꢀ012 / ꢀ0215 Center Conductor (Stranded)
ꢀ012 / ꢀ0215 Center Conductor (Stranded)
ꢀ031 / ꢀ066 Dielectric
ꢀ031 / ꢀ105 Dielectric
ꢀ085 Max Outer braid (must be round for crimp termination)
ꢀ102 MaxꢀJacket
ꢀ126 Max Outer braid (must be round for crimp termination)
ꢀ145 MaxꢀJacket
SIZE 8
ꢀ012 / ꢀ0395 Center Conductor (Stranded)
ꢀ055 / ꢀ133 Dielectric
ꢀ180 Max Outer braid (must be round for crimp termination)
ꢀ201 MaxꢀJacket
Special coax contacts may be available for cables outside of ranges shownꢀConsult Amphenol Aerospace for further
assistance in selection of coax contact cablesꢀ
222
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
MIL-DTL-38999 Circular Connector
Amphenol
Overview
®
Amphenol Connectors are ideally suited for the incorporation of shielded contacts for high
performance interconnection applicationsꢀThe circular family is built around
MIL-DTL-38999 specifications, with Mil-approved and commercial styles offeredꢀ
Normal operating voltage for circulars with power contacts only is up to
900 VAC (RMS) at sea levelꢀ
38999
III
HD
Dualok
The MIL-DTL-38999 family offers these features for contact termination flexibility:
• Widest selection of insert arrangements that can incorporate:
II
•
Size 8 high speed Quadrax and Differential Twinax contacts for MIL-DTL-38999 Series III
(specially modified to accommodate keyed contacts)
Transition adapters for use in attaching D38999 Series III connectors with high speed
quadrax or differential contacts to PCB boards
I
TV-R,Tri-Start, D38999 Series III
•
SJT
• High performance capability series for both
general duty and severe environment
applications
• Offers the widest range of Subminiature
Family Mil-Spec qualified options in contact
and connector styles
Accessories
Aquacon
Herm/Seal
PCB
•
•
•
Size 8, 12 and 16 Coax contacts
Size 8 and 12 Twinax contacts
Size 8, 10 & 12 Triax contacts
• Wide selection of connector shell styles and sizes
• Scoop-proof recessed design in LJT-R, TV-R and SJT-R connectors provide
protection for contacts
• Standard power contacts are crimp rear release, qualified to SAE AS39029
• Coax, Twinax, and Triax contacts employ the same retention system as power
contacts, simplifying user substitution
• Threaded coupling; completely mates in one
turn; crimp termination
• Superior EMI/EMP shielding effectiveness
• Scoop-proof design (recessed pins)
• Available in aluminum, stainless steel and
firewall, or lightweight composite styles
See 38999 section Series III for complete
information on this sectionꢀ
HIGH
SPEED
Fiber
Optics
GENERAL ORDERING INFORMATION
Amphenol MIL-DTL-38999, which feature rear
removable contacts, are normally supplied with a full
complement of power contacts, separately
Contacts
Connectors
Cables
packagedꢀCoax, twinax and triax contacts are
ordered by part number as referenced in the part
number charts on the following pages of this
catalog, and are substituted for the power contacts
at the time of the cable or equipment assemblyꢀIf the
application is for coax, twinax or triax contacts only,
the connector may be ordered less contacts and no
power contacts will be suppliedꢀ
JT-R, D38999 Series II
LJT-R, D38999 Series I
See 38999 section Series II, JT for complete
information on this series.
• Shorter profile connector series for
applications requiring maximum
space savings
• Bayonet coupling, crimp termination
• Also available in solder termination types
under MIL-DTL-27599 Series II
See 38999 section Series I, LJT for complete
information on this series.
• Scoop-proof (recessed pins)
• Bayonet coupling, crimp termination
• Also available in solder termination types
under MIL-DTL-27599 Series II
HOWTO ORDER CONNECTORS AND
HIGH FREQUENCY CONTACTS
• Select the Circular Series desiredꢀ
(See features of each series given briefly on
this page and in-depth in the other sections of this catalog,
which are on-line at wwwꢀamphenol-aerospaceꢀcom)
Series I - LJT-R Connectors
Series II - JT-R Connectors
Series III - TV-R Connectors
SJT* - SJT-R Connectors
See Amphe-Lite (Industrial 38999 type) Catalog 12-094
• Select the quadrax, differential twinax, coax, twinax and/or
triax contacts or the transition adapters that are needed from
the tables on the following pages that correspond to the cable
being usedꢀ
• Select the insert arrangement to accommodate required
number of contactsꢀInsert patterns for quadrax and
differential twinax contacts are on pages 241,242ꢀInsert
patterns for coax, twinax and triax contacts are on
pages 258-260ꢀ
• Complete the connector part number from the connector
series catalog, incorporating the chosen insert pattern
numberꢀSee detailed how to order page 243 for ordering
38999, Series III with quadrax and differential twinax
contactsꢀConsult Amphenol for assistance in ordering
38999 circulars with coax, twinax and triax contactsꢀ
• Consult Amphenol Aerospace for ordering information for
connectors with PC tail contacts and for transition adaptersꢀ
• If connector is ordered less contacts, power contacts and/or
sealing plugs may be ordered separately to fill out the insert
arrangementꢀ
Amphe-Lite, 38999 Type
SJT-R, 38999 Type
See Catalog 12-094 for complete
information on this series.
• Commercial/Industrial
38999 Series III type
• Cost effective high performance
connector for severe environments or
general duty industrial applications
• Consult Amphenol Industrial
Operations for further information
12-094 catalog is on-line at www.
amphenol-industrial.com.
See the SJT section of this catalog.
• Amphenol proprietary series
(non-MS) which is a further
expansion of the basic JT family,
but incorporates the LJT
scoop-proof design
• Compliant with several
European specifications
NOTE:
NOTE:
SAE AS39029 supersedes MIL-C-39029ꢀ
MIL-DTL-38999 supersedes MIL-C-38999ꢀ
MIL-DTL-27599 supersedes MIL-C-27599
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
223
Quadrax Contacts,MIL-DTL-38999,Series III
General Description
Amphenol
Aerospace
Amphenol® Quadrax Contacts-Offer several
38999
advantages for high data transfer rates, low power consumption and
III
excellent
EMI compatibility:
HD
• Four strategically spaced inner contacts form two 100 or 150
Ohm matched impedance differential pairs
• Outer contact has rugged wall section for durability
• Available in size 8 crimp termination style
Dualok
II
I
• Also available in size 8 with PC tails (see page 233)
• Requires modification of MIL-DTL-38999 connector to
accommodate keyed contacts
SJT
Accessories
Aquacon
Herm/Seal
PCB
TYPICAL QUADRAX
SOCKET CONTACT
has socket outer contact
with a socket inner contact
(4) CENTER
CONDUCTORS
BRAID
JACKET
HIGH
TYPICAL QUADRAX PIN CONTACT
has pin outer contact with a pin
inner contact
SPEED
INSULATION
Cable Illustration - Quadrax Contact
Fiber
Optics
Quadrax Contacts are gold plated,
crimp termination
Finish of mating contact parts: supplied with
0ꢀ000050 minꢀgold over nickel on mating
partsꢀConsult Amphenol for availability of
other finishesꢀ
Contacts
Connectors
Cables
Quadrax Size 8 Contact Performance:
• Bandwidth: Up to 1ꢀ25 GHz
• Data Rate: Exceeding 2ꢀ5 Gbpsꢀ
• Voltage Rating: 500 Vrms maxꢀ@
sea level
Quadrax Pin with 8P8C “RJ45” Jack
Quadrax Pin Size 8 and MIL-DTL-38999
Series III Connector
• Dielectric Withstanding Voltage:
1000 VAC rms between all inner contacts
@ sea level, 500 VAC rms between inner
and outer contacts @ sea level
Guide for selecting a Backshell:
When ordering backshells, to avoid interference between the piggyback
grommets which are used on all size 8 cavities and the backshell the below
keepout dimensions must be adhered toꢀ(based on existing arrangements)
Suggested Numbering for Quadrax
Contacts
ORIENTATION
KEY
1
1
2
Size
17
A Dia Min L Min
4
ꢀ734
ꢀ540
ꢀ540
ꢀ540
ꢀ540
ꢀ540
2
4
3
3
19
ꢀ869
21
ꢀ869
PIN CONTACT
MATING FACE
SOCKET CONTACT
MATING FACE
23
1ꢀ088
1ꢀ234
Differential Pairs, contacts 1-3, 2-4ꢀ
25
See page 243 for part number ordering of
popularly used 38999 Series III connectors with
100 ohm quadrax contactsꢀ
Suggested Strain Relief - Insert Arrangements
9-5 or 19-18 with Quadrax Contacts
Quadrax differential pairs are 1 and 3, 2 and 4ꢀ
Due to the piggyback grommet interference with normal strain reliefs
on the shell size 9 only, the recommended strain relief for the
connector is: Amphenol part number TGW-R-5309-10 (OD Cad) or
TGF-R-5309-10 (Electroless nickel) - shell size 9 onlyꢀFor 19-18 insert
pattern, recommended backshell: Glenair 367-221-NFꢀThis is
recommended due to the proximity of the size 8 contacts in relation
to the shellꢀ
Also see Quadrax contacts for ARINC 600 and R27
Rack and Panel Connectors on pages 265 and 266ꢀ
224
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Quadrax Contacts for MIL-DTL-38999
Series III, Application Data
Amphenol
TV-R Series, MIL-DTL-38999 Series III* Connectors
38999
QUADRAX CONTACTS FOR USE INTV-R CONNECTORS
III
Contact Part Number
HD
Dualok
Inner
Conductor
(AWG)
Crimping Tools
Impedance
(Ohms)
Contact
Size
Electrical
Protocol††
Cable
(Termination Instruction Sheet)**
II
Pin
Socket
Inner Contact Outer Contact
Draka Fileca F-4703-3, F4704-4,
Filotex ET 2PC236, Filotex
ET2PF870, PICWire E50424
ABS0972,Tensolite
I
SJT
21-033384-021 21-033385-021
Ethernet, 1000 Base-T
Gigabit Ethernet
24
(L-2119-A)
(L-2119-A)
Accessories
Aquacon
Herm/Seal
PCB
23450/04090X-4(LD) Draka Fileca
F-4704-5, ABS1503 KD 24
Tensolite NF24Q100, NF24Q100-01,
24443/9P025X-4(LD), S280W502-4,
24443/03130X-4(LD),
24443/C20714X-4(LD),
24450/0120X-4(LD),
21-033385-051
(L-2119-D)
NF24-2Q100,TYCO CEC-
RWC-18664, GORE GSC-01-
81869-01, 24443/03166X-4(LD),
ThermaxT956-4T200, PicWire
E51424,Thermax MX100Q-24,
NF24Q100-01-200C (Space),
BMS13-72T03C04G024
Tensolite NF22Q100,
NF22Q100-01, Thermax 956-5,
GORE RCN 7688
Ethernet, 1000 Base-T
Gigabit Ethernet
21-033384-051
(L-2119-D)
HIGH
24
22
SPEED
Fiber
Optics
Contacts
Connectors
Cables
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
21-033384-061 21-033385-061
(L-2119-H) (L-2119-H)
Tensolite NF26Q100, NF26Q100-01,
NF26-2Q100, PIC E51426,
WireneticsW-3714-379
S280W502-4/BMS13-
72T03C04G024
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
100
21-033384-071 21-033385-071
(L-2119-AB) (L-2119-AB)
26
24
26
21-033384-141 21-033385-141
(BACC47GM1) (BACC45GN1)
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
21-033384-151 21-033385-151
Draka Fileca F-4704-6,
Gore RCN 8672
(L-2119-AW)
(L-2119-AW)
M22520/2-01
Tensolite NF24Q100-01 (same as
21-03338( )
-51, uses EMI Piggyback)
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
Ethernet (100 Mbps),
1000 Base-T Gigabit
Ethernet (1 Gbps)
with Positioner M22520/5-01
M22520/2-37 with Die Set
or with Daniels M22520/5-45
Positioner
K709
21-033384-161 21-033385-161
(L-2119-BE) (L-2119-BE)
24
22
22
8
(Location A)
21-033384-171 21-033385-171
(L-2119-BN) (L-2119-BN)
Gore RCN8513, JSFY18-3
Tensolite NF22Q100 Special Box
pattern, only mates with 21-0333
( )-181
21-033384-181 21-033384-181
(L-2119-BP) (L-2119-BP)
•Serial FPDPApplications
(2.5 Gbps) (Typical app
run at 150 Ohms)
21-033384-191 21-033385-191
Tensolite NF24Q100, NF24Q100-01
for 2ꢀ5 Gbps applications
24
24
(L-2119-BS)
(L-2119-BS)
• HDMI 1.3
Gore RCN 8647, RCN 8687
USB2 (28433/02171LX-4)
21-033384-301 21-033385-301
21-033384-101† 21-033385-101†
21-033384-211 21-033385-211
90
USB2.0 (480 Mbps)
IEEE 1394B Firewire
Tensolite 24450/03089X-4(LD)
Gore RCN8647
24
JSFY02-1, JSFY18
21-033384-221 21-033385-221
21-033384-231 21-033385-231
24
24
IEEE 1394B Firewire
IEEE 1394B Firewire
110
Gore RCN8487, JSFY18
Tensolite 24450/03089X-4(LD)
Same as 21-03338( )-211 but Box
pattern, mates with 21-03338( )-241
only
21-033384-241† 21-033385-241†
24
IEEE 1394B Firewire
Meets EN3155-074
F-4703, ABS1503KD24
21-033384-281 21-033385-281
21-033384-31 21-033385-031
100
150
Tensolite 26473/02006X-4(LD)/Gore
RCN8328 (not for new designs, use
21-033450/1 series)
26
(L-2119-B)
(L-2119-B)
CHART CONTINUES ON NEXT PAGE
QUADRAX CONTACT DATA
Contacts are inserted by handꢀRefer to termination instructions listedꢀContacts are
Daniels crimping tools available from Daniels Mfgꢀ Corpꢀ 6103 Anno Aveꢀ,
Orlando, FL 32809
* Requires modified connector to accommodate keyed contactsꢀ
removed with a removal toolꢀRecommended tool is MIL-I-81969/14-06, Daniels DRK-264-8ꢀ **Termination instructions are packaged with each contact and can be
Refer to termination instructions listedꢀFinish of mating contact parts: Contact part numbers found on-line at: wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
shown in the chart above are supplied gold plated per ASTM B488 Type II, Code C, ꢀ000050 † Consult Amphenol for current release of this contact or instruction sheet if applicableꢀ
minꢀthick over nickel plate per AMS-QQ-N-290, Class 2, ꢀ000030/ꢀ000150 thickꢀ
†† Test reports available for indicated protocolsꢀ Consult Amphenol
Aerospaceꢀ Typical applications run at 150 Ohms
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
225
Quadrax Contacts,MIL-DTL-38999,Series III
Application Data
Amphenol
Aerospace
TV-R Series, MIL-DTL-38999 Series III* Connectors
38999
QUADRAX CONTACTS FOR USE INTV-R CONNECTORS
III
Contact Part Number
HD
Dualok
Inner
Conductor
(AWG)
CrimpingTools
Impedance
(Ohms)
Contact
Size
Electrical
Protocol††
(Termination Instruction Sheet)**
Cable
Inner
Outer
II
I
Pin
Socket
Contact
Contact
Tensolite 26473/02006X-4(LD) Same as
21-033384/5-31 but box pattern (not for new
designs, use 21-033450/1 series) Gore
RCN8328
21-033384-201† 21-033385-201†
SJT
26
Accessories
Aquacon
Herm/Seal
PCB
M22520/2-01
with Positioner
M22520/2-37
or with Daniels
Positioner K709
M22520/5-01
with Die Set
M22520/5-45
(LocationA)
Gore RCN7625
21-033384-271 21-033385-271
21-033450-001 21-033451-001
150
8
Fibre-Channel (1 GBPS, 2
Tensolite 26473/02006X-4(LD), Gore RCN8328
26
26
GBPS, 1G/2G), 1000 Base-CX
(1.25 GBPS), SCSI-2 (3.2 GBPS)
(L-2119-BW)
(L-2119-BW)
Tensolite 26473/02006X-4(LD), Gore RCN8328
(same as 21-033450/1-1 except box pattern.
Mates with 21-033450/1-11 only.
Fibre-Channel (1 GBPS, 2
GBPS, 1G/2G), 1000 Base-CX
(1.25 GBPS), SCSI-2 (3.2 GBPS)
21-033450-011† 21-033451-011†
HIGH
SPEED
Quadrax PCB Contacts
Contact Part Number
Pin Socket
Quadrax PCB Contacts
Contact Part Number
Fiber
Optics
Impedance
Impedance
(Ohms)
100 Ohm
L Dim Pretinned
L Dim
Pretinned
(Ohms)
100 Ohm
100 Ohm
150 Ohm
150 Ohm
150 Ohm
100 Ohm
100 Ohm
100 Ohm
150 Ohm
100 Ohm
150 Ohm
100 Ohm
150 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
150 Ohm
100 Ohm
100 Ohm
150 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
Pin
Socket
Contacts
Connectors
Cables
21-033398-021 21-033397-021
21-033398-031 21-033397-031
21-033398-061 21-033397-061
21-033398-071 21-033397-071
21-033398-081 21-033397-081
21-033398-091 21-033397-091
21-033398-111 21-033397-111
21-033398-121 21-033397-121
21-033398-131 21-033397-131
21-033398-141 21-033397-141
21-033398-151 21-033397-151
21-033398-191 21-033397-191
21-033398-211 21-033397-211
21-033398-221 21-033397-221
21-033398-231 21-033397-231
21-033398-241 21-033397-241
21-033398-251 21-033397-251
21-033398-271 21-033397-271
21-033398-281 21-033397-281
21-033398-291 21-033397-291
21-033398-301 21-033397-301
21-033398-311 21-033397-311
21-033398-341 21-033397-341
21-033398-351 21-033397-351
21-033398-361 21-033397-361
21-033398-371 21-033397-371
21-033398-381 21-033397-381
21-033398-391 21-033397-391
21-033398-401 21-033397-401
21-033398-411 21-033397-411
21-033398-421 21-033397-421
21-033398-431 21-033397-431
21-033398-451 21-033397-451
21-033398-461 21-033397-461
21-033398-471 21-033397-471
21-033398-481 21-033397-481
21-033398-491 21-033397-491
21-033398-501 21-033397-501
1.035
0.866
1.035
0.494
0.780
0.840
0.708
0.859
0.780
0.615
0.815
0.605
0.815
0.775
0.494
0.741
0.788
0.741
0.806
1.035
0.836
0.940
0.901
0.871
0.939
0.672
0.914
0.360
1.009
0.866
1.169
0.819
0.494
0.761
0.889
0.971
0.418
0.875
X
21-033398-581 21-033397-581
21-033398-591 21-033397-591 100/150 Ohm 0.939
0.721
21-033398-601 21-033397-601
21-033398-611 21-033397-611
21-033452-011 21-033453-011
21-033452-021 21-033453-021
21-033452-031 21-033453-031
21-033452-041 21-033453-041
21-033452-051 21-033453-051
21-033452-061 21-033453-061
21-033452-071 21-033453-071
100 Ohm
100 Ohm
150 Ohm
150 Ohm
150 Ohm
150 Ohm
150 Ohm
150 Ohm
150 Ohm
0.939
1.366
X
X
X
1.035 (mates to 21-033450/51 series)
0.815 (mates to 21-033450/51 series)
0.815 (mates to 21-033450/51 series)
0.866 (mates to 21-033450/51 series)
0.494 (mates to 21-033450/51 series)
0.582 (mates to 21-033450/51 series)
0.939 (mates to 21-033450/51 series)
X
X
X
Daniels crimping tools are available
from Daniels Mfgꢀ Corpꢀ 6103 Anno
Aveꢀ, Orlando, FL 32809
SEALING PLUGS
Sealing Plugs
*
Requires modified connector to
accommodate
keyed contactsꢀ
for use with D38999 Connectors
using Quadrax Contacts -
Size 8 Cavities
Part Number
** Termination instructions are
packaged with each contact and
can be found on-line at: wwwꢀ
amphenol-aerospaceꢀ
***Standard Plastic
T3-4008-59P
T3-4008-59P1
Standard Plastic to be used with PCB tails
(shorter tail length)
com/serviceinstructionsꢀasp
†
Consult Amphenol Aerospace for
current release of this contact or
instruction sheet if applicableꢀ
***Metal sealing plug - can be used when
mating with contacts on mating half
21-033899-8Q1
21-033899-8Q2
Metal sealing plug used with PCB’s and
mating contact on mating half
†† Test reports available for
indicated protocolsꢀ
Consult Amphenol Aerospaceꢀ
*** Must be used with
21-033321-005
PIGGYBACK GROMMET
piggyback grommet sealꢀ
Grommet for use with D38999
Connectors
using Quadrax Contacts
Part Number
Metallized piggyback grommet
21-033321-023
Indicated length given in chart at
left is the distance from the rear of the contact
retention shoulder to the tip of the PCB tailsꢀ
L DIM. LENGTH
INDICATED IN
TABLE COLUMN
21-033398-511 21-033397-511 100/150 Ohm 0.699
21-033398-521 21-033397-521
21-033398-531 21-033397-531
21-033398-541 21-033397-541
21-033398-551 21-033397-551
21-033398-561 21-033397-561
100 Ohm
100 Ohm
100 Ohm
100 Ohm
100 Ohm
0.582
0.666
0.946
0.788
0.815
X
Note: It does not indicate stickout length when
installed in D38999 connectorꢀ
226
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
New“Split-Pair”Quadrax Contacts & Cables
Assemblies for MIL-DTL-38999, Series III
Features & Benefits/How to Order
Amphenol
38999
III
HD
Dualok
“Split-Pair”for use with CAT6AType Cable
II
Amphenol Aerospace offers the high performance
interconnect solution for CAT6A type cableꢀ
I
SJT
MIL-DTL-38999 Series III Connectors with “Split-Pair”
Quadrax Contacts for use with CAT6A Type Cable
FEATURES & BENEFITS:
• Overall higher bandwidth than standard CAT5E quadrax-Supports
up to 6ꢀ5 Gbps per pair
• Enhanced crosstalk performance (compared to standard quadrax)
due to compatibility with shielded twisted pair of cables
• Can be used for a variety of high speed applications beyond
current quadrax design**
• Four strategically spaced inner contacts form two 100 Ohm
matched impedance differential pairs
• Outer contact has rugged wall section for durability
• Available in size 8 crimp termination style
• Also available in size 8 PC tails
• Can be installed into existing quadrax contact connector cavities
• Requires modification of MIL-DTL-38999 connector to accommo-
date keyed contacts
Accessories
Aquacon
Herm/Seal
PCB
New/Featured
HIGH
SPEED
Fiber
Optics
Contacts
Connectors
Cables
“Split-Pair” Quadrax Contacts for use
with CAT6A Type Cable
APPLICATIONS:
For use with, but not limited to, the
following electrical protocols :
Suggested Numbering for Quadrax Contacts
1
•
•
•
•
•
•
•
10/100/1000/10GBASE-T Ethernet
DVI
1
2
4
2
4
USB 2ꢀ0, 3ꢀ0
3
3
Serial Rapid IO (up to 3ꢀ125 Gbps)
PCI-Express 2ꢀ0
PIN CONTACT
MATING FACE
SOCKET CONTACT
MATING FACE
HDMI 1ꢀ3a
SATA 2ꢀ0 (up to 3 GHz)
Cable selection may limit data rate of above protocols
Differential Pairs: 1 & 4, 2 & 3
SPLIT-PAIR QUADRAX CONTACT*
PART NUMBERS:
Crimp Style Part Number
PIN 21-033470-001
Cable
AWG
24
SPLIT-PAIR QUADRAX
SOCKET CONTACT
Thermax
1536-224
SOCKET 21-033471-001
PIN 21-033470-021
Thermax
1536-195
26
SOCKET 21-033471-021
CRIMP TOOLS:
Outer Contact
Inner Contact
DANIELS M22520/5-01
with die setY1999 or
M22520/5-45
DANIELS M22520/2-01
with positioner K1777
SPLIT-PAIR QUADRAX
PIN CONTACT
Daniels crimping tools are available from Daniels Mfgꢀ Corpꢀ 6103
Anno Aveꢀ, Orlando, FL 32809
REMOVAL TOOL:
M81969/14-12
* Patent pendingꢀ
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
227
New“Split-Pair”Quadrax Contacts
Frequencies & Performance Data
How to Order/Transition Adapters
PCB QUADRAX SOCKET
Amphenol
Aerospace
38999
PCB QUADRAX PIN
III
PCB Pin Part Numbers
21-033466-011
21-033466-021
21-033466-031*
21-033466-041
21-033466-051
21-033466-061
21-033466-071
21-033466-081
Impedance
Length ꢀ015
1ꢀ035
ꢀ815
PCB Socket Part Numbers
21-033467-011
21-033467-021
21-033467-031*
21-033467-041
21-033467-051
21-033467-061
21-033467-071
21-033467-081
Impedance
Length ꢀ015
1ꢀ035
ꢀ815
HD
Dualok
II
I
ꢀ815
ꢀ815
100 Ohm
100 Ohm
ꢀ866
ꢀ866
SJT
ꢀ494
ꢀ494
Accessories
Aquacon
Herm/Seal
PCB
ꢀ582
ꢀ582
ꢀ815
ꢀ815
ꢀ840
ꢀ840
*Pretinned
LENGTH
INDICATED IN
TABLE COLUMN
HIGH
Indicated length given in charts above is the
distance from the rear of the contact retention
shoulder to the tip of the PCB tailsꢀ
SPEED
Fiber
Optics
Note: It does not indicate stickout length when
installed in D38999 connectorꢀ
Contacts
Connectors
Cables
TRANSITION ADAPTERS FOR LAUNCHING SIGNALS TO PC BOARDS
100 OHM QUADRAXTRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALSTO PC BOARDS
Mating
Thread
Size
Part Number
Quadrax Type Adapter/
Cable or PCB Tail Length
Impedance
(Ohms)
Illustration of Adapter
Plug
Receptacle
Quadrax Plug Adapter/
Thermax 1536-224
21-033468-011
PCB Quadrax Receptacle 90
Degree Adapter/
Tail Length ꢀ110
21-033469-001
21-033469-011
21-033469-021
21-033469-031
PCB Quadrax Receptacle
Straight Adapter/
Tail Length ꢀ110
100
ꢀ375
Quadrax Receptacle 90
degree Adapter with cable to
board/
Thermax 1536-224
Quadrax Receptacle Straight
Adapter with cable to board/
ꢀ195 tail length Thermax
1536-224
228
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
New“Split-Pair”Quadrax Contacts
Frequencies & Performance Data
Amphenol
FREQUENCIES OF INTEREST
38999
III
For use with the following, but not limited to,
electrical protocols:
Frequency (GHz) Insertion Loss (dB) Return Loss (dB) NEXT (dB) FEXT (dB)
HD
Dualok
0ꢀ1
0ꢀ24
0ꢀ5
0ꢀ625
1
0ꢀ09
0ꢀ22
0ꢀ45
0ꢀ57
0ꢀ98
1ꢀ29
1ꢀ47
1ꢀ86
2ꢀ11
2ꢀ42
2ꢀ86
35ꢀ68
36ꢀ44
43ꢀ66
43ꢀ49
17ꢀ82
15ꢀ1
62ꢀ36
42ꢀ87
43ꢀ63
53ꢀ68
49ꢀ26
43ꢀ57
46ꢀ02
48ꢀ01
37ꢀ45
29ꢀ9
59ꢀ29
62ꢀ25
55ꢀ22
43ꢀ53
48ꢀ33
44ꢀ12
40ꢀ78
47ꢀ23
38ꢀ12
31ꢀ52
29ꢀ36
10/100/1000/10GBASE-T Ethernet
•
•
•
•
•
•
DVI
II
USB 2ꢀ0
I
Serial Rapid IO (up to 3ꢀ125 Gbps)
PCI-Express 2ꢀ0
HDMI 1ꢀ3a
SJT
1ꢀ25
1ꢀ5
1ꢀ7
2
Accessories
Aquacon
Herm/Seal
PCB
17ꢀ94
12ꢀ23
12ꢀ9
SATA 2ꢀ0 (up to 3 GHz)
2ꢀ5
3
15ꢀ97
16ꢀ52
35ꢀ94
HIGH
PERFORMANCE
DATA
Insertion Loss
S-Parameters Magnitude
SPEED
0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
-3.5
-4.0
-4.5
-5.0
-5.5
-6.0
-6.5
The following graphs
on this page and the
next page provide
performance data on
Amphenol® 10GBASE
signal integrity (SI)
quadrax contactsꢀ
Testing was done with
2 mated contacts
Fiber
S1, 2
Optics
Contacts
Connectors
Cables
terminated on both
ends of 1 meter
Thermax cableꢀ
0.1
0.2
0.3
0.4
0.5 0.6 0.7 0.8
1
2
3
4
5
Frequency / GHz
Return Loss
S-Parameters Magnitude
0
-5
S1, 1
-10
-15
-20
-25
-30
-35
-40
-45
-50
0.1
0.2
0.3
0.4
0.5 0.6 0.7 0.8
1
2
3
4
5
Frequency / GHz
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
229
New“Split-Pair”Quadrax Contacts
Frequencies & Performance Data
Amphenol
Aerospace
Near-end Crosstalk
S-Parameters Magnitude
38999
-20
-25
-30
-35
-40
-45
-50
-55
-60
-65
-70
-75
-80
III
S1, 3
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
HIGH
SPEED
0.1
0.2
0.3
0.4
0.5 0.6 0.7 0.8
1
2
3
4
5
Fiber
Frequency / GHz
Optics
Contacts
Connectors
Cables
Far-end Crosstalk
S-Parameters Magnitude
-20
S1, 4
-25
-30
-35
-40
-45
-50
-55
-60
-65
-70
-75
-80
0.1
0.2
0.3
0.4
0.5 0.6 0.7 0.8
1
2
3
4
5
Frequency / GHz
2.5 Gps Eye Pattern (PRBS n=15)
P1 Real Part
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
TD Voltage
-0.1
-0.2
-0.3
-0.4
-0.5
0
200
400
600
800
1000
1200
Time / ps
230
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
DifferentialTwinax Contacts,MIL-DTL-38999
Series III, General Description
Amphenol
Amphenol® DifferentialTwinax Contacts -Offer
several advantages for high data transfer rates, low power consumption
and excellent EMI compatibility:
• Two strategically spaced inner contacts form two 100 or 150 Ohm
matched impedance differential pairs
• Outer contact has rugged wall section for durability
• Available in size 8 crimp termination style
• Also available in size 8 with PC tails
38999
III
HD
Dualok
II
I
• Requires modification of MIL-DTL-38999 connector to
accommodate keyed contacts
SJT
Accessories
Aquacon
Herm/Seal
PCB
TYPICAL DIFFERENTIAL
(2) CENTER
CONDUCTORS
BRAID
JACKET
TWINAX SOCKET
CONTACT has socket
outer contact with a
socket inner contact
HIGH
SPEED
Fiber
Optics
INSULATION
Contacts
Connectors
Cables
TYPICAL DIFFERENTIAL
TWINAX PIN CONTACT
has pin outer contact with
a pin inner contact
Cable Illustration - Differential Twinax Contact
DifferentialTwinax Contacts are Gold
plated, CrimpTermination
Finish of mating contact parts: supplied with
0ꢀ000050 minꢀgold over nickel on mating partsꢀ
Consult Amphenol for availability of
other finishesꢀ
DifferentialTwinax Size
8 Contact Performance:
• Bandwidth: Up to 1ꢀ25 GHz
Differential Twinax Socket Contact
• Data Rate: Exceeding 2ꢀ5 Gbps
• Voltage Rating: 500 Vrms maxꢀ@ sea level
• Dielectric Withstanding Voltage:
1000 VAC rms between all inner contacts @
sea level 500 VAC rms between inner and
outer contacts @ sea level
Differential Twinax Pin Contact
Suggested Numbering
or DifferentialTwinax Contacts
ORIENTATION
KEY
2
1
1
2
PIN CONTACT
MATING FACE
SOCKET CONTACT
MATING FACE
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
231
DifferentialTwinax Contacts,MIL-DTL-38999
Series III, Application Data
Amphenol
Aerospace
TV-R Series, MIL-DTL-38999 Series III* Connectors
38999
III
DIFFERENTIALTWINAX CONTACTS FOR USE INTV-R CONNECTORS
HD
Contact Part Number
Dualok
Crimping Tools
Impedance Contact
Electrical
Protocol††
(Termination Instruction Sheet)**
Cable
II
I
(Ohms)
Size
Inner
Outer
Pin
Socket
Contact
Contact
SJT
Tensolite 24463/05099X-8(LD), Thermax MX
100-24, Tensolite 24463/9P025X-2(LD), Thermax
12814, ST5M1284-003 (98 Ohm), 26463/70460X-
2 (98 Ohm), PIC E10224,
Fileca 2709-3, NF24T100-200C (Space),
S280W502-1
Accessories
Aquacon
Herm/Seal
PCB
21-033387-021
(L-2119-E)
21-033388-021
(L-2119-E)
GORE GSC-05-827300-00 Tensolite
26453/03184X-2(LD) Thermax 956-626Z
21-033387-051*** 21-033388-051***
(L-2119-AY)
(L-2119-AY)
Tensolite 26453/03184X-2(LD), Thermax
956-626Z, GORE GSC-05-827300-00
ASNE08072003-09
21-033387-041
(L-2119-T)
21-033388-041
(L-2119-T)
HIGH
100
Ethernet, USB
SPEED
21-033387-061
(L-2119-BH)
21-033388-061
(L-2119-BH)
Fiber
23460/05114X-2(LD), PIC E1024
Optics
M22520/2-01
with Positioner
M22520/2-37
or with Daniels
Positioner K709
M22520/5-01
with Die Set
M22520/5-45
(Location A)
21-033387-071
(L-2119-BJ)
21-033388-071
(L-2119-BJ)
Raychem 0026A0024, M17/176-00002 (77 Ohm)
Contacts
Connectors
Cables
8
JSFY11-24, Tensolite 24463/03220T-2(LD),
Thermax 956-1T200
21-033387-091
(L-2119-BT)
21-033388-091
(L-2119-BT)
21-033387-101
(L-2119-AK)
21-033388-101
(L-2119-AK)
S280W502-6, Tensolite 24463/9P026X-2(LD)
AXON P509782
21-033387-131
21-033387-151
21-033387-161
21-033388-131
21-033388-151
21-033388-161
100
100
100
Tensolite 26453/03184X-2(LD)
Gore DXN 2125
21-033387-031
(L-2119-AC)
21-033388-031
(L-2119-AC)
Tensolite 26483/03071X-2(LD)
Tensolite 26483/03071X-2(LD)
150
21-033456-001
(L-2119-BX)†
21-033457-001
(L-2119-BX)†
Fibre Channel, 1000 Base-CX
Ethernet
PCB DIFFERENTIALTWINAX CONTACTS FOR USE INTV-R CONNECTORS
Daniels crimping tools are available from Daniels Mfgꢀ
Corpꢀ 6103 Anno Aveꢀ, Orlando, FL 32809
* Requires modified connector to accommodate keyed
contactsꢀ
Contact Part Number
PCB Twinax
Contacts
Impedance Contact
(Ohms)
Size
Pin
Socket
*** Indicated contact is vacuum degassed
†† Test reports available for indicated protocolsꢀ
Consult Amphenol Aerospaceꢀ
**Termination instructions are packaged with each contact
and can be found on-line at:
wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
† Consult Amphenol Aerospace for current release of this
instruction sheetꢀ
PCB (1.035 Length)
PCB (.788 Length)
PCB (.494 Length)
PCB (.939 Length)
PCB (.780 Length)
PCB (.871 Length)
PCB (.937 Length)
PCB (1.035 Length)
PCB (.843 Length)
PCB (.806 Length)
PCB (.908 Length)
PCB (.530 Length)
PCB (.819 Length)
PCB (1.035 Length)
21-033834-001
21-033834-031
21-033834-041
21-033834-051
21-033834-061
21-033834-071
21-033834-081
21-033834-091
21-033834-101
21-033834-111
21-033834-121
21-033834-131
21-033834-141
21-033834-021
21-033835-001
21-033835-031
21-033835-041
21-033835-051
21-033835-061
21-033835-071
21-033835-081
21-033835-091
21-033835-101
21-033835-111
21-033835-121
21-033835-131
21-033835-141
21-033835-021
100
8
Indicated length given in chart at left
is the distance from the rear of the contact
retention shoulder to the tip of the PCB tailsꢀ
L DIM. LENGTH
INDICATED IN
TABLE COLUMN
150
PCB (1.035 Length) mates to
210-33456/57 series
21-033458-001
21-033457-001
DIFFERENTIALTWINAX CONTACT DATA
Note: It does not indicate stickout length when
installed in D38999 connectorꢀ
Contacts are inserted by handꢀRefer to termination instructions listedꢀContacts are
removed with a removal toolꢀRecommended tool is MIL-I-81969/14-06, Daniels
DRK-264-8ꢀ Refer to termination instructions listedꢀ
Finish of mating contact parts: Contact part numbers shown in the chart above are
supplied gold plated per ASTM B488 Type II, Code C, ꢀ000050 minꢀthick over nickel
plate per AMS-QQ-N-290, Class 2, ꢀ000030/ꢀ000150 thickꢀ
232
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Compliant Quadrax Contacts and
PC Tail Quadrax Contacts for PC Boards Attachment
General Description
Amphenol
38999
III
Amphenol® Quadrax Contacts for Printed
Circuit Board Attachment- Available for MIL-DTL-38999
Series III Circular connectors with straight PC tail termination and with
compliant pin terminationꢀThese provide the ideal solution for bringing
high speed data transmission to the boardꢀ
MIL-DTL-38999, SERIES III
CONNECTOR WITH PC TAIL
CONTACTSꢀThis arrange-
ment has 33 size 22D and 2
Quadrax PC tail contactsꢀ
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
MIL-DTL-38999, SERIES III
CONNECTOR WITH PC TAIL
CONTACTSꢀThis arrange-
ment has 8 Quadrax PC tail
contactsꢀ
HIGH
SPEED
Fiber
Compliant Pin Quadrax and PC Tail Quadrax Contacts
Optics
Contacts
Connectors
Cables
Amphenol® Quadrax Contacts for Rectangular Board Level
Connectors - Incorporate the same size 8 Quadrax PCB contacts as used in circular
38999 connectorsꢀ
• Size 8 Quadrax Compliant contacts with hole diameters:
ꢀ025 ꢀ002 PTH Quadrax contact
ꢀ040 ꢀ003 PTH shell grounding
Accommodates backplane ꢀ125 inch minꢀthickness
• Consult Amphenol Aerospace for availability of additional connector configurations
4 POSITION BOARD LEVEL CONNECTORWITH QUADRAX
2.200
2.000
.475
.376
.500
.720
Compliant Pin Quadrax Board Level Connector
8 POSITION BOARD LEVEL CONNECTORWITH QUADRAX
3.440
3.640
.475
.381
.500
.720
H
G
F
E
D
C
B
A
A
B
C
D
E
F
G
H
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
233
QuadraxTransition Adapters and
DifferentialTwinaxTransition Adapters
General Description
Amphenol
Aerospace
38999
III
Amphenol® Transition Adapters - Are used to facilitate
launching of controlled impedance signals to printed circuit boardsꢀ
Amphenol provides transition adapters in both contact types:
HD
Dualok
QUADRAX
TRANSITION
ADAPTER PLUG
•
Quadrax transition adapters, 90° or straight receptacles
threaded or cable to board style
II
I
•
Differential twinax transition adapters, 90° or straight receptacles,
threaded or cable to board style
SJT
Accessories
Aquacon
Herm/Seal
PCB
QUADRAX
TRANSITION ADAPTER
90 DEGREE RECEPTACLE
HIGH
ELECTRICAL PROTOCOLS FOR
QUADRAXTRANSITION ADAPTERS
SPEED
Fiber
Part Number
Impedance
(Ohms)
Electrical
Protocol††
Optics
Plug
Receptacle
21-033836-031
21-033836-041
21-033836-051
21-033836-061
Ethernet, gigabit Ether
Ethernet, gigabit Ether
Ethernet, gigabit Ether
Ethernet, gigabit Ether
Contacts
Connectors
Cables
90° Quadrax Receptacle and Plug Transition Adapter
21-033837-081 (90 degree)
21-033837-091 (straight)
21-033837-041 (90 degree)
21-033837-051 (straight)
21-033837-061 (90 degree)
21-033837-141 (90 degree)
100
Suggested Numbering forTransition
Adapters with Quadrax Contacts
Ethernet, gigabit Ether
ORIENTATION
KEY
21-033837-101
21-033836-021
1000 Base CX,
Fibre channel
1
2
4
3
4
3
1
2
21-033837-021 (90 degree)
21-033837-211 (jam nut)
21-033837-031 (straight)
21-033837-071 (90 degree)
1000 Base CX,
Fibre channel
150
21-033837-111
TRANSITION ADAPTER
PLUG
ELECTRICAL PROTOCOLS FOR
MATING FACE
DIFFERENTIALTWINAXTRANSITION ADAPTERS
90° RECEPTACLE
TRANSITION ADAPTER
MATING FACE
Part Number
Impedance
(Ohms)
Electrical
Protocol††
Plug
Receptacle
21-033832-81
21-033832-21
Ethernet
Ethernet
21-033833-021 (90 degree)
21-033833-031 (90 degree)
21-033833-151 (90 degree)
21-033832-111†
21-033832-91
100
21-033833-161† (90 degree)
21-033833-171† (90 degree)
21-033833-091 (90 degree)
21-033833-051 (90 degree)
21-033833-141 (90 degree)
90° Differential Twinax Receptacle and Plug Transition Adapter
21-033833-111 (90 degree)
21-033833-181† (90 degree)
21-033833-101 (90 degree)
150
TRANSITION ADAPTER DATA
Finish of mating contact parts: Contacts are supplied gold plated per
ASTM B488 Type II, Code C, ꢀ000050 minꢀthick over nickel plate per
AMS-QQ-N-290, Class 2, ꢀ000030/ꢀ000150 thickꢀ
† Consult Amphenol Aerospace for current release of this adapterꢀ
††Test reports available for indicated protocols; consult Amphenol Aerospaceꢀ
234
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
QuadraxTransition Adapters
For Attachment to PC Boards
Application Data
Amphenol
38999
100 OHM QUADRAXTRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALSTO PC BOARDS
III
HD
Dualok
Part Number
Mating
Thread
Size
Crimping Tools
Quadrax Type Adapter/
Cable or PCB Tail Length
Impedance
(Ohms)
(Termination Instruction Sheet)**
Illustration of Adapter
Plug
Receptacle
Inner Contact Outer Contact
II
Quadrax Plug Adapter/
I
Tensolite NF24Q100, NF24Q100-01
24443/9P025X-4(LD) S280W502-4
24443/03130X-4(LD) Thermax
956-4TN
21-033836-031
(L-2119-U)
SJT
Accessories
Aquacon
Herm/Seal
PCB
Quadrax Plug Adapter/
Tensolite NF22Q100, NF22Q100-01,
Thermax 956-5, Tensolite
24450/030894-4(LD) Draka Fileca
F-4704-5
Quadrax Plug Adapter/
Draka Fileca F-4703-3, F-4704-4
21-033836-041
(L-2119-W)†
21-033836-051
(L-2119-Y)
Quadrax Plug Adapter/
NF26Q100
21-033836-061
(L-2119-AM)†
HIGH
SPEED
Gore RCN8724 (30 awg)
21-033836-071
21-033836-101
Fiber
M22520/2-01
Gore ACN1042 (28 awg) Gore
RCN8973
Optics
with Positioner
M22520/2-37
or with
Daniels Positioner
K709
M22520/5-01
with Die Set
M22520/5-45
(Location A)
Contacts
Connectors
Cables
21-033836-131
Gore RCN 8422
Quadrax Plug Adapter/
Hexnut with Lock Wire Holes
Tensolite RCN8467
21-033836-081
21-033836-111
100
.375
Tensolite NF24Q100-01
Quadrax Receptacle Straight Adapter
in-line jam nut (threaded)/
GSC-10-8273900
21-033837-081
(L-2119-AR)†
Quadrax Receptacle Straight Adapter
in-line jam nut (threaded) Tensolite
NF24Q100-01
21-033837-261
Quadrax Receptacle Straight Adapter
in-line (threaded)/NF24Q100
Tensolite NF24Q100-01, Tensolite
24443/9P025X -4 (LD), S280W502-4,
Tensolite 24443/03130X-4 (LD),
Thermax 956-4TN
21-033837-091
(L-2119-BL)
PCB Quadrax Receptacle 90 Degree
Adapter/Tail Length .110
21-033837-041
21-033837-201
21-033837-051
PCB Quadrax Receptacle 90 Degree
Adapter/Tail Length .200
NA
NA
PCB Quadrax Receptacle Straight
Adapter/Tail Length .110
PCB Quadrax Receptacle Straight
Adapter/Special Tail Length (.200)
21-033837-061
21-033837-131
Straight adapter Tail Length .175
PCB Quadrax Receptacle Straight
Adapter/Tail Length .110 except .019”
diameter inner contact tails
Quadrax Receptacle 90 degree
Adapter with cable to board/
NF24Q100 Tail Length .110
Quadrax Receptacle 90 degree
Adapter with cable to board/
ABS1503KD24 Tail Length .110
Tensolite NF22Q100-01 Thermax
956-5 Draka Fileca F4704-5
Quadrax Receptacle Straight Adapter
with cable to board/
21-033837-291
21-033837-141
(L-2119-BB)†
M22520/2-01
with Positioner
M22520/2-37
or with
Daniels
Positioner
K709
21-033837-231
M22520/5-01
with Die Set
M22520/5-45
(Location A)
100
21-033837-101
(L-2119-AN)
NF24Q100, NF24Q100-01 Tail
Length .195
Quadrax receptacle straight adapter
w/ cable to board, Tail length .195
Draka Fileca F-4703-3, F-4703-4
21-033837-241
**Termination instructions are packaged with each contact and can be found on-line at:
wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
† Consult Amphenol Aerospace for current release of this adapter and
instruction sheet if applicableꢀ
Daniels crimping tools are available from Daniels Mfgꢀ Corpꢀ 6103 Anno
Aveꢀ, Orlando, FL 32809
See electrical protocols for transition adapters on page 234ꢀ
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
235
QuadraxTransition Adapters
For Attachment to PC Boards
Application Data
Amphenol
Aerospace
38999
150 OHM QUADRAXTRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALSTO PC BOARDS
III
HD
Dualok
Part Number
Mating
Thread
Size
Crimping Tools
Quadrax Type Adapter/
Cable or PCB Tail Length
Impedance
(Ohms)
(Termination Instruction Sheet)**
Illustration of Adapter
Plug
Receptacle
Inner Contact Outer Contact
II
I
Quadrax Plug Adapter/
Tensolite 26473/02006X-4(LD), Gore
RCN8328
M22520/2-01
with Positioner
M22520/2-34
21-033836-021
(L-2119-S)
SJT
Accessories
Aquacon
Herm/Seal
PCB
PCB Quadrax Receptacle 90 Degree
Adapter/Tail Length .110
21-033837-021
21-033837-251
150
.375
NA
PCB Receptacle 90 Degree Adapter/
Tail Length .200
NA
HIGH
PCB Quadrax Receptacle Straight
Adapter/Tail Length .110
21-033837-031
SPEED
Fiber
Optics
Quadrax Receptacle Straight Adapter
in-line Jam Nut (threaded) Tensolite
26473/02006X-4 (LD), Gore
RCN8328
21-033837-211
(L-2119-BY)
Contacts
Connectors
Cables
Quadrax Receptacle 90 degree
Adapter with cable to board/
Tensolite 26473/02006X-4
21-033837-071
(L-2119-AI)†
150
M22520/5-01
M22520/2-01
with Die Set
with Positioner
M22520/5-45
Quadrax Receptacle Straight Adapter
with cable to board/
Tensolite 26473/02006X-4 (LD)
M22520/2-34
21-033837-111
(L-2119-AP)
(Location A)
Daniels crimping tools are available from Daniels Mfgꢀ Corpꢀ 6103 Anno
Aveꢀ, Orlando, FL 32809
**Termination instructions are packaged with each contact and can be found on-line at:
wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
† Consult Amphenol Aerospace for current release of this adapter and
instruction sheet if applicableꢀ
See electrical protocols for transition adapters on page 234ꢀ
236
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
DifferentialTwinaxTransition Adapters
For Attachment to PC Boards - Application Data
Amphenol
100 OHM DIFFERENTIALTWINAXTRANSITION ADAPTERS
38999
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALSTO PC BOARDS
III
Part Number
Mating
Thread
Size
Crimping Tools
Differential Twinax Type Adapter/
Cable or PCB Tail Length
Impedance
(Ohms)
HD
Dualok
(Termination Instruction Sheet)**
Illustration of Adapter
Plug
Receptacle
Inner Contact Outer Contact
Differential Twinax Plug Adapter/
M17/176-00002 (77 ohms)
24463/9P026X-2
Differential Twinax Plug Adapter/
Tensolite 24463/9P025X-2(LD)
10-646060
II
21-033832-081
(L-2119-AJ)
M22520/5-01
M22520/2-01
I
with Die Set
with Positioner
M22520/5-05
M22520/2-34
21-033832-021
(L-2119-P)
SJT
(Location B)
Accessories
Aquacon
Herm/Seal
PCB
100
.3125
PCB Differential Twinax Receptacle 90
Degree Adapter/ Tail Length .110
21-033833-021
N/A
N/A
PCB Differential Twinax Receptacle
Straight Adapter/ Tail Length .110
PCB Differential Twinax Receptacle
Straight Adapter/ Tail Length .165
21-033833-031
21-033833-151
HIGH
M22520/5-01
with Die Set
M22520/5-45
(Location A)
SPEED
M22520/2-01
with Positioner
M22520/2-34
21-033832-111†
Differential Twinax Plug Adapter/
Tensolite CAN22TDT120 (120 Ohm)
Fiber
Optics
21-033833-161†
21-033833-171†
Contacts
Connectors
Cables
PCB Differential Twinax Receptacle 90
degree Adapter/Tail Length .283
100
.375
N/A
N/A
PCB Differential Twinax Receptacle
Straight Adapter/Tail Length .283
Differential Twinax Receptacle 90
degree Adapter (low profile) with cable
to board/ Tensolite 24463/9P026X-2
Differential Twinax Receptacle 90
degree Adapter with cable to board/
Tensolite 24463/9P025X-2
Differential Twinax Receptacle 90
degree Adapter with cable to board/
Tensolite 24463/9P025X-2
21-033833-091
(L-2119-AF)
M22520/5-01
with Die Set
M22520/5-45
(Location A)
M22520/2-01
with Positioner
M22520/2-34
21-033833-051
(L-2119-V)
100
N/A
21-033833-141
(L-2119-BU)
150 OHM DIFFERENTIALTWINAXTRANSITION ADAPTERS
FOR LAUNCHING CONTROLLED IMPEDANCE SIGNALSTO PC BOARDS
Part Number
Mating
Thread
Size
Crimping Tools
Differential Twinax Type Adapter/
Cable or PCB Tail Length
Impedance
(Ohms)
(Termination Instruction Sheet)**
Illustration of Adapter
Plug
Receptacle
Inner Contact Outer Contact
M22520/5-01
M22520/2-01
DifferentialTwinax Plug Adapter/
Tensolite 26483/03071X-2
with Die Set
21-033832-091
(L-2119-BR)
with Positioner
M22520/2-34
M22520/5-45
(Location A)
PCB Differential Twinax
Receptacle 90 Degree Adapter/
Tail Length ꢀ110
150
.375
21-033833-111
N/A
N/A
N/A
N/A
PCB Differential Twinax
Receptacle Straight Adapter/
Tail Length ꢀ110
21-033833-181†
Differential Twinax Receptacle
90 degree Adapter with cable to
board/
M22520/5-01
with Die Set
M22520/5-45
(Location A)
M22520/2-01
with Positioner
M22520/2-34
21-033833-101
(L-2119-BM)†
150
N/A
Tensolite 26483/03071X-2
**Termination instructions are packaged with each contact and can be found on-line at:
wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
† Consult Amphenol Aerospace for current release of this adapter and instruction
sheet if applicableꢀ See electrical protocols for transition adapters on page 234ꢀ
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
237
Micro D-TwinaxTransition Adapters
Push-Pull Quick Disconnect Interconnects
Amphenol
Aerospace
38999
III
Micro DifferentialTwinaxTransition Adapters
HD
New/Featured
Dualok
Amphenol now offers differential twinax transition adapters in smaller sizes that
provide matched impedance interconnection to PCB boardsꢀOur unique
push-pull quick disconnect adapter design offers:
• Advantages over traditional threaded type adapters
• Launching of controlled impedance (100 ohm) signals for
high speed twinax contacts with push-pull quick disconnect coupling
• Rugged construction, 100+ mating cycles for reliable and secure
data transmission
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
• Miniature size for tighter spacing on boards
• Intermountability with existing threaded solutions having the same
PCB tail footprint
Micro D-Twinax Transition Adapters
Shown right: Straight receptacle mated to plug
Shown left: Jam nut and 90° receptacles
Styles include:
HIGH
• Plug - standard length and extended length options
• Straight PCB receptacle, 90° PCB receptacle
• Two jam nut receptacle styles - both with standard length
and extended length options
SPEED
Fiber
Optics
• Bushing assembly 90° adapter (used with plug or jam nut receptacle)
Contacts
Connectors
Cables
Micro D-TwinaxTransition Adapter Plug
.719 REF.
.245 DIA.
REF.
Impedance
(Ohms)
Part Number
21-033832-151
21-033832-161
Cable Type*
Calmont 3007-1923-12-7
Tensolite 26453/03184X-2LD
Thermax 956-626Z
100
21-033832-121** Calmont 3007-1923-12-7
* See page 240 for information on other cable terminations.
** Same as -151 with extended ferrule for added cable support
Micro D-TwinaxTransition Adapter Straight PCB Receptacle
.020 .001 DIA.
PCB TAILꢀ
2 PLACEꢀ
.433 REF.
.110 REF.
.050
Straight receptacle
mated to plug
.100
Impedance
(Ohms)
Part Number
.0223 .0010 ꢀSUARE
OR
.0290 .0010 DIA. ROUND
PCB TAILꢀ, 4 PLACEꢀ
.290 DIA.
REF.
21-033833-191
100
.100
All dimensions for reference onlyꢀ
238
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Micro D-TwinaxTransition Adapters
Push-Pull Quick Disconnect Interconnects
Amphenol
90 Degree
receptacle mated
to plug
38999
III
Micro D-TwinaxTransition Adapter 90° PCB Receptacle
HD
Dualok
.244
REF.
.484
REF.
II
I
SJT
.305
REF.
Impedance
(Ohms)
Accessories
Aquacon
Herm/Seal
PCB
Part Number
21-033833-201
100
21-033833-281
ꢀ140 PCB tail length
.020 .001 ꢀDA.
PCB TADLS 2 PLACES
.110 REF.
HIGH
SPEED
Fiber
.100
Optics
.050
.0223 .0010 SQUARE
OR
.0290 .0010 ꢀDA. ROUNꢀ
PCB TADLS, 4 PLACES
Contacts
Connectors
Cables
.100
Micro D-TwinaxTransition Adapter Jam Nut Receptacles
Jam Nut Receptacle, Style 1
Smaller diameter front shell requires a smaller mounting D-hole
dimension in panelꢀ
Jam nut receptacle,
Style 1, mated
to plug
.559 REF.
.200
.405 REF.
PANEL
MAX.
Impedance
(Ohms)
.250-36 UNS-24
THREAD
Part Number
Cable Type*
21-033833-241
Calmont 3007-1923-12-7
Tensolite 26453/03184X-2LD
Thermax 956-626Z
.235
FLAT
MAX.
21-033833-261
100
21-033833-211** Calmont 3007-1923-12-7
* See page 240 for information on other cable terminationsꢀ
** Same as -241 with extended ferrule for added cable support
.3125 HEX
.3125 HEX NUT
LOCK WASHER
Jam Nut Receptacle, Style 2
Has a larger diameter front shell than Style 1ꢀ Requires a larger
mounting D-hole in panelꢀ
.545 REF.
.405 REF.
.150
PANEL
MAX.
Jam nut receptacle,
Style 2, mated
to plug
.375-24 UNS-2A
THREAD
Impedance
(Ohms)
.339
FLAT
MAX.
Part Number
Cable Type*
21-033833-251
Calmont 3007-1923-12-7
Tensolite 26453/03184X-2LD
Thermax 956-626Z
21-033833-271
100
.425 HEX
21-033833-231** Calmont 3007-1923-12-7
.450 DIA. REF.
2 PLACES
.425 HEX NUT
LOCK WASHER
*
See page 240 for information on other cable terminationsꢀ
** Same as -251 with extended ferrule for added
cable support
All dimensions for reference onlyꢀ
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
239
Micro D-TwinaxTransition Adapters
Push-Pull Quick Disconnect Interconnects
Amphenol
Aerospace
38999
III
90° Bushing Assemblies for use withWired
Micro D -TwinaxTransition Adapters
To facilitate tight cable bend requirements, Amphenol provides 90°
bushing assemblies which convert straight plug and receptacle
wired adapters into 90° wired adaptersꢀ
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
90° Bushing Assembly with
Jam Nut Micro D Transition Adapter
.531 REF.
.210
REF.
90° Bushing Assembly
Part Number
HIGH
.210
REF.
SPEED
21-033425-201
.435
REF.
90° bushing assembly is ordered separatelyꢀ
Adapters are not included with bushing assemblyꢀ
Fiber
Optics
Contacts
Connectors
Cables
Illustrations below show how the 90° bushing assembly
attaches to either a plug or a jam nut receptacle adapterꢀ
JAM NUT RECEPTACLE
TRANSITION ADAPTER
PLUG TRANSITION
ADAPTER
1.264
REF.
1.019
REF
90 BUSHING
ASSEMBLY
90° BUSHING
ASSEMBLY
.563 REF.
.668 REF.
.563 REF.
.668 REF.
90° Bushing Assembly with Wired Micro D Plug
Transition Adapter
90° Bushing Assembly with Wired Micro D Jam Nut
Receptacle Transition Adapter
Amphenol transition adapters are capable of terminating to additional 100 Ohm
cables beyond what are listed in the charts on pages 1 and 2ꢀ Cables need to
have the following dimensions:
• ꢀ0210/ꢀ011 Diaꢀ stranded center conductor (26/30 AWG)
• ꢀ045 Diaꢀ maxꢀ inner wire insulation
• ꢀ115 Diaꢀ maxꢀ outer braid (round type preferred)
• ꢀ150 Diaꢀ maxꢀ jacket
Consult Amphenol Aerospace for other cable termination possibilitiesꢀ
All dimensions for reference onlyꢀ
240
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Insert Arrangements - MIL-DTL-38999,Series III
Incorporating Quadrax & DifferentialTwinax Contacts
Amphenol
38999
This illustrated listing represents the most readily available patterns incorporating quadrax and differential twinax contacts within
D38999, Series III connectorsꢀIf you require other arrangements than what are shown here, consult Amphenol for further availabilityꢀIn
most cases, unless otherwise stated, size 8 cavities can be filled with quadrax or differential twinax contactsꢀArrangements can be
mixed with any size 8 coax, and/or concentric twinax or triax contactsꢀ
III
HD
Dualok
II
Front face of pin inserts illustrated
I
SJT
1
Accessories
Aquacon
Herm/Seal
PCB
A
1
A
B
8
2
4
B
D
17
7
9
3
6
10
5
6
30
11
C
Insert Arrangement
Number of Contacts
Contact Size
9-5
17-2
17-22
17-52
17-60
HIGH
1
8
38
22D
1
2
2
8
2
8
8
2
8
SPEED
8 Twinax
12
22D
Fiber
Optics
Grounded
Meets Boeing
Specification
Contacts
Connectors
Cables
R
A
f
A
16
1
V
N
B
W
B
P
P
S
2
7
C
15
14
3
U
B
A
C
N
L
D
A
13
12
4
T
g
h
M
D
5
U
E
C
B
11
8
K
K
K
H
F
F
S
E
10
J
G
9
8
R
M
Insert Arrangement
Number of Contacts
Contact Size
19-18
19-31
1
19-AB
19-AD
21-75
14
22D
4
12
2
8
4
16
20
1
8
4
8
8
22D
12
8
Note: 19-AB same as
19-18 but no 22D contactsꢀ
Ground plane onlyꢀ
29
64
22
24
72
74
16
79
46
7
85
1
94
A
T
A
S
B
18
81
75
32
33
67
68
41
59
60
B
E
R
C
F
25
P
N
D
E
42
82
19
U
V
C
D
26
6
76
99
53
J
M
F
93
15
L
G
21
84
K
H
28
78
Insert Arrangement
Number of Contacts
Contact Size
21-79
23-6
25-7
17
2
6
8
97
22D
2
8
22D
8
CONTACT LEGEND
12
8
10
16
20
22D
Quadrax or
DifferentialTwinax
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
241
Insert Arrangements - for MIL-DTL-38999
Incorporating Quadrax & DifferentialTwinax Contacts
Amphenol
Aerospace
38999
III Front face of pin inserts illustrated
HD
Dualok
II
I
U
A
B
A
B
S
A
T
SJT
C
R
Y
a
p
C
B
V
b
d
Accessories
Aquacon
Herm/Seal
PCB
Z
S
c
P
G
D
D
G
T
5
r
s
e
q
R
P
E
F
4
H
1
U
N
E
t
w
C
f
Z
W
u
v
6
7
n
g
M
F
k
3
2
F
m
h
X
V
W
N
D
L
G
Y
X
M
H
K
H
E
L
J
J
K
HIGH
SPEED
Insert Arrangement
Number of Contacts
Contact Size
25-8
25-17
25-20
Fiber
8
8
36
22D
6
8
10 13
20 16
3
4
Optics
8
12
Contacts
Connectors
Cables
1
8
1
A
W
12
2
B
V
t
X
u
s
Y
C
3
U
D
A
B
13
25
v
11
10
AA
r
Z
19
20
18
14
D
T
7
6
2
3
q
a
21
4
24
E
S
p
b
z
w
R
F
17
23
22
6
15
5
n
c
m
d
C
P
y
G
16
x
9
k
e
N
H
g
h
f
8
J
M
K
5
4
L
7
Insert Arrangement
Number of Contacts
Contact Size
25-26
5
25-46
4
25-62
16
20
4
40
20
2
8
8
4
8
12
8
16
16
Ground plane only
CONTACT LEGEND
12
8
10
16
20
22D
Quadrax or
DifferentialTwinax
242
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
How to Order 38999,Series III Circular
With Quadrax 100 Ohm Contacts
Amphenol
38999
Amphenol Tri-Start, 38999 Series III* Connectors can be ordered with the following popularly used Quadrax contacts:
100 ohm quadrax 21-033385-051 socket contacts
III
100 ohm quadrax 21-033384-051 pin contacts
Use the following coded number ordering procedure :
HD
Dualok
1ꢀ
2ꢀ
3ꢀ
4ꢀ
5ꢀ
6ꢀ
II
For ordering of connectors with
any other quadrax contacts or
differential twinax contacts,
please consult Amphenol
Connector Type
Shell Type
Service Class
Shell Size –
Insert Arrangement
Contact Type
Alternate Keying
Position
I
SJT
TVP
00
RQW
21–75
P
B
Aerospace for part numbersꢀ
Accessories
Aquacon
Herm/Seal
PCB
Step 6. Select an Alternate Keying Position
Locksmith keying–rotation of minor keysꢀSee Series III Alternate
Positions below “N” not required for normal position
Step 1. Select a Connector Type
TV
Tri-Start Series Connector with metal shells
TVP
CTV
CTVP
Back panel mounted receptacle with metal shells
Tri-Start Series Connector with composite shells
Back panel mounted receptacle with composite shells
HIGH
Tri-Start Alternate
Positions
A plug with a given rotation
letter will mate with a
receptacle with the same
rotation letterꢀThe angles for
a given connector are the
same whether it contains
pins or socketsꢀInserts are
not rotated in conjunction
with the master key/keywayꢀ
SPEED
MAIN
KEYWAY
Fiber
RECEPTACLE
(front face shown)
AR
BSC
Optics
˚
Step 2. Select a Shell Style
00
BR
BSC
˚
Contacts
Connectors
Cables
Wall mount receptacle
DR
˚
CR
BSC
02
Box mount receptacle available only with the PCB
tails and epoxy backfilled (non-removable)
BSC
˚
MAIN
KEYWAY
PLUG
(front face shown)
06
07
Straight plug
AP
BSC
˚
BP
BSC
˚
Jam nut receptacle
DP
˚
CP
BSC
˚
BSC
Step 3. Select a Service Class with Quadrax
RQF
RGQF Electroless nickel plated ground plane
RQW
Olive drab cadmium plate
RGQW Olive drab cadmium plated ground plane
RQK
Corrosion resistance stainless steel
RGQK Stainless steel ground plane
Electroless nickel plated
AR°
or
AP°
BSC
BR°
or
BP°
BSC
CR°
or
CP°
BSC
DR°
or
DP°
Key & Keyway
Shell
Arrangement
Size
Identification Letter
BSC
N
A
105
102
80
35
64
140
132
118
140
155
131
215
248
230
205
234
197
265
320
312
275
304
240
B
C
9
D
E
91
QDT
Durmalon plated, Nickel-PTFE alternative to cadmium
N
A
B
C
D
E
95
113
90
53
119
51
141
156
145
156
146
141
208
182
195
220
176
184
236
292
252
255
298
242
GQDT Groundplane Durmalon
11, 13,
and 15
QDZ
Zinc Nickel Black Conductive
N
A
B
C
D
E
80
135
49
66
62
142
170
169
140
145
153
196
200
200
200
180
197
293
310
244
257
280
272
17 and
19
Step 4. Select a Shell Size and
79
Insert Arrangement
See insert arrangements available with quadrax contacts on
preceding pagesꢀShell Size and Insert Arrangements are together in one
chartꢀFirst number represents Shell Size, second number is the Insert
Arrangement
N
A
B
C
D
E
80
135
49
66
62
142
170
169
140
145
153
196
200
200
200
180
197
293
310
244
257
280
272
21, 23,
and 25
79
N
A
B
C
D
E
80
135
49
66
62
142
170
169
140
145
153
188
188
188
188
188
188
293
310
244
257
280
272
Step 5. Select Contact Type
25L, 33,
and 37
P
Pin contacts
S
Socket contacts
79
* The incorporation of quadrax or differential twinax contacts requires a
modified connector to accommodate keyed contactsꢀ
For more information on Tri-Start, MIL-DTL-38999 Series III connectors see the section in this catalogꢀ
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
243
Coaxial Contacts for MIL-DTL-38999
General Description
Amphenol
Aerospace
38999
Amphenol® Coaxial Contacts-Offer several advantages
III
for reliable interconnection and continued performance:
HD
Dualok
• Large crimping area assures low contact resistance and high
tensile strength
II
I
• Back insulator positively captivates inner contact against
axial loads
• Front insulator provides closed entry for socket inner contact
• Recessed inner contact is protected
SJT
Accessories
Aquacon
Herm/Seal
PCB
• Outer contact has rugged wall section for durability
TYPICAL SUBMINIATURE COAX
SOCKET CONTACT has socket outer
contact with a pin inner contact
HIGH
TYPICAL SUBMINIATURE COAX
PIN CONTACT has pin outer con-
tact with a socket inner contact
SPEED
Fiber
Optics
Jacket
Contacts
Connectors
Cables
Insulation
Center
Conductor
Braid
MIL-DTL-38999 LJT-R, JT-R,TV-R, SJT-R MS Type,
Coax Size 12 Socket Assembled Contact
Cable Illustration - Coax Contact
Coax Contacts are gold plated, crimp termination
Finish of mating contact parts: supplied with 0ꢀ000050 minꢀgold over nickel
on mating partsꢀOther finishes are available; consult Amphenol for further
informationꢀ
MIL-DTL-38999 LJT-R, JT-R,TV-R, SJT-R MS Type,
Coax Size 16 Pin Unassembled Contact
Coax Size 12 & 16 Contact Performance:
•
Typical VSWR: 1ꢀ5:1 maximum up to 700 MHz and 500 MHz
respectively, for properly cabled size 12 and 16 coaxial contacts in the
M38999 Series I, II and III
•
•
Insulation Resistance: 5,000 megohms minimum @ 25°C
Dielectric Withstanding Voltage:
Size 12: 1,000 VAC Rms @ sea level, 250 VAC Rms @ 50,000 ftꢀ
Size 16: 800 VAC Rms @ sea level, 250 VAC Rms @ 50,000 ftꢀ
•
Contact Resistance: See MIL-C-39029/27, /28, /75, /76, /77, /78
MIL-DTL-38999 LJT-R, JT-R,TV-R, SJT-R MS Type,
Coax Size 8 Pin Assembled Contact
Coax Size 8 Contact Performance:
•
Typical VSWR when terminated to specified 50 ohm cable:
1ꢀ5:1 maximum up to 3 GHz (excluding 21-033101/2-27)
•
•
Insulation Resistance: 5,000 megohms minimum @ 25°C
Dielectric Withstanding Voltage:
1,300 VAC Rms @ sea level, 250 VAC Rms @ 50,000 ftꢀ
•
Contact Resistance: See MIL-C-39029/59, /60
MIL-DTL-38999 LJT-R, JT-R,TV-R, SJT-R MS Type,
Coax Size 8 Socket Unassembled Contact
244
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Coaxial Contacts for MIL-DTL-38999
Application Data
Amphenol
38999
JT-R Series, MIL-DTL-38999 Series II,
SAE AS39029 (27, 28, 76, 78)
III
HD
Dualok
COAX CONTACTS FOR USE IN JT-R CONNECTORS
Contact Part Number
II
I
Crimping Tools
Installation Tools
Contact
Cable
SJT
(Termination Instruction Sheet)**
Size
Accessories
Aquacon
Herm/Seal
PCB
Pin
Socket
Inner Contact
Crimp Ferrule
Insertion
Removal
21-033122-564
21-033121-564
RG-178B/U, RG-196A/U
(M39029/76-425) (M39029/78-433)
M81969/8-07
or
M81969/14-03
or
Amphenol
11-8674-16
11-8794-16
or
MS27495A16
or
M81969/8-08
or
M81969/14-03
or
Amphenol
11-8675-16
11-8795-16
or
MS27495R16
or
(L-2035-AG) (L-2035-AH)
Haveg
30-00761, 30-02024,
30-02033
Tensolite
24713/A955KK1, 26723/
A955KK1
M22520/2-01
with Positioner
M22520/2-35
or with
Daniels Positioner
K532
21-033122-562† 21-033121-562†
(L-2035-AN) (L-2035-AP)
M22520/4-01
with Positioner
M22520/4-02
HIGH
16
SPEED
Fiber
21-033122-561† 21-033121-561†
Haveg 61-02051
Optics
(L-2035-AK)
(L-2035-AL)
RG-174A/U, RG-188A/U,
RG-161/U,
RG-187A/U, RG-316/U,
RG-179B/U,
Haveg 8100207, Times
(HS-179)
AA3248, Teledyne 11299,
Raychem 7528H1424
21-033122-563
21-033121-563
MS27534-16
MS27534-16
Contacts
Connectors
Cables
(M39029/76-424) (M39029/78-432)
(L-2035-AD)
(L-2035-AE)
21-033122-546
21-033121-546
(M39029/28-211) (M39029/27-210)
(L-2035-F)
(L-2035-G)
M81969/8-09
or
M81969/14-04
or
Amphenol
11-8674-12
11-8794-12
or
MS27495A12
or
M81969/8-10
or
M81969/14-04
or
Amphenol
11-8675-12
11-8795-12
or
MS27495R12
or
M22520/31-01
with Positioner
M22520/31-02
or
Daniels GS-200
Tool
21-033122-541
21-033121-541
RG-180B/U, RG-195A/U,
Raychem 9528A1318
M22520/2-01
with Positioner
M22520/2-34
or with
Daniels Positioner
K323
(M39029/28-409) (M39029/27-402)
(L-2035-C) (L-2035-E)
12
21-033122-543† 21-033121-543†
Raychem 5022E5111
Raychem 9530A5314
Raychem 9527A1318
Gore GWN1159A
(L-2035-M)
(L-2035-N)
with Positioner
G2P330
21-033122-544
21-033121-544
(L-2035-R)
(L-2035-S)
MS27534-12
MS27534-12
21-033122-545
21-033121-545
(L-2035-U)
(L-2035-V)
21-033122-547† 21-033121-547†
(L-2035-X) (L-2035-Y)
MIL-DTL-38999 CONTACT DATA
All contacts mate with other contacts in this series which have the same inner and outer contact diametersꢀ
NOTE: SAE AS39029 supersedes MIL-C-39029
**Termination instructions are packaged with each contact and can be found on-line at:
wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
JT Example:
Socket 21-033121-564 on RG-196A/U cable will mate with
pin 21-033122-563 on RG-188A/U cable which is used in
both this and the LJT-R seriesꢀ
LJT, TV, SJT,
Amphe-Lite
Example:
Socket 21-033123-564 on RG-196A/U cable will mate with
pin 21-033122-563 on RG-188A/U cable which is used in
both this and the JT-R seriesꢀ
Finish of mating contact parts: Contact part numbers shown in the chart above are supplied with 0ꢀ000050 minꢀgold
(Knoop hardness 130-200) over nickel on mating partsꢀOther finishes are available; consult Amphenolꢀ
Daniels crimping tools are available from:
Daniels MfgꢀCorpꢀ6103 Anno Aveꢀ, Orlando FL 32809
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
245
Coaxial Contacts for MIL-DTL-38999
Application Data, contꢀ
Amphenol
Aerospace
38999
III
LJT-R, MIL-DTL-38999 Series I;TV-R, MIL-DTL-38999 Series III; Amphe-Lite and SJT-R
Series, SAE AS39029 (28, 59, 60, 75, 76, 77)
HD
Dualok
COAX CONTACTS FOR USE IN LJT-R,TV-R, AMPHE-LITE AND SJT-R CONNECTORS
II
I
Contact Part Number
Crimping Tools
Installation Tools
Insertion Removal
Contact
Size
Cable
SJT
Pin
Socket
Inner Contact
Crimp Ferrule
Accessories
Aquacon
Herm/Seal
PCB
21-033122-564
21-033123-564
RG-178B/U, RG-196A/U
(M39029/76-425) (M39029/77-429)
M81969/8-07 M81969/8-08
or or
(L-2035-AG)
(L-2035-AJ
M81969/14-03 M81969/14-03
Haveg 30-00761, 30-02024,
30-02033
Tensolite 24713/A955KK1,
26723/A955KK1
M22520/2-01
with Positioner
M22520/2-35
or with
Daniels Positioner
K532
or
or
21-033122-562†
(L-2035-AN)
21-033123-562†
(L-2035-AR)†
M22520/4-01
with Positioner
M22520/4-02
Amphenol
11-8674-16
11-8794-16
or
Amphenol
11-8675-16
11-8795-16
or
16
21-033122-561†
(L-2035-AK) †
21-033123-561†
(L-2035-AM) †
HIGH
Haveg 61-02051
MS27495A16 MS27495R16
or or
MS27534-16 MS27534-16
SPEED
RG-174A/U, RG-188A/U,
RG-316/U,
RG-161/U RG-187A/U,
RG-179B/U,
21-033122-563
21-033123-563
Fiber
(M39029/76-424) (M39029/77-428)
Optics
(L-2035-AD)
(L-2035-AF)
Haveg 8100207, Times
(HS-179)
Raychem 7528H1424
AA3248, Teledyne 11299
Contacts
Connectors
Cables
21-033122-546
21-033123-546
(M39029/28-211) (M39029/75-416)
(L-2035-F)
(L-2035-H)
21-033122-541
21-033123-541
RG-180B/U, RG-195A/U,
Raychem 9528A1318
M81969/8-09 M81969/8-10
(M39029/28-409) (M39029/75-417)
(L-2035-C)
(L-2035-D)
or
or
M22520/31-01
with Positioner
M22520/31-02
or
M81969/14-04 M81969/14-04
21-033122-543†
(L-2035-M) †
21-033123-543†
(L-2035-P)
M22520/2-01
with Positioner
M22520/2-34
or with
Daniels Positioner
K323
Raychem 5022E5111
Raychem 9530A5314
Raychem 9527A1318
Raychem 9527A1314
or
or
Amphenol
11-8674-12
11-8794-12
or
Amphenol
11-8675-12
11-8795-12
or
21-033122-544†
(L-2035R)
21-033123-544†
(L-2035-T) †
12
Daniels
GS-200 Tool
with Positioner
G2P330
21-033122-545†
(L-2035-U) †
21-033123-545†
(L-2035-W)
MS27495A12 MS27495R12
or
or
21-033122-585
(L-2035-GG)
21-033123-585
(L-2035-GH)
MS27534-12 MS27534-12
Gore GWN1159A, Nexans
RG179-DT
21-033122-547
(L-2035-X) †
21-033123-547
(L-2035-Z) †
21-033122-589
(L-2035-GR)
21-033123-589
(L-2035-GT)
M/A-Com 5M2869-001
M22520/5-01
with die set
M22520/5-03 (A)
or M22520/5-08
(A)
M22520/5-35 (B)
or M22520/10-01
with Die Set
M22520/10-05
(A)
M22520/5-01
with die set
M22520/5-05 (A)
or M22520/5-19
(B)
RG-187A/U, RG-179B/U,
RG-174A/U,
RG-188A/U, RG-316/U,
RG-161/U
Haveg 8100207, Times
(HS-179)AA3248, Teledyne
11299
21-033102-023†
(L-1107-C)
21-033101-023†
(L-1107-G)
M22520/2-01
with Positioner
M22520/2-31††
or solder
11-9170
Hand
or
8
inserted
MS
RG-142B/U, RG-223/U,
SF-142 (solder inner
conductor)
21-033102-024*
(L-1107-D)
21-033101-024*
(L-1107-H)
or M22520/10-01
with Die Set
M22520/10-07
(A)
NOTE: SAE AS39029 supersedes MIL-C-39029
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part
numbers indicate applicable die closureꢀ Commercial equivalents with the same
die closure dimension may be usedꢀ
† Consult Amphenol Aerospace for current release of this contact or
instruction sheet if applicableꢀ
†† When inner contact is installed by crimping onlyꢀ 11-10134 Expander Tool
Kit must be used to assemble rear insulator over contactꢀ
**Termination instructions are packaged with each contact and can be found
on-line at: wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
CHART CONTINUES ON NEXT PAGE
246
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Coaxial Contacts for MIL-DTL-38999
Application Data, contꢀ
Amphenol
38999
LJT-R, MIL-DTL-38999 Series I;TV-R, MIL-DTL-38999 Series III; Amphe-Lite and
SJT-R Series, SAE AS39029 (28, 59, 60, 75, 76, 77), contꢀ
III
HD
COAX CONTACTS FOR USE IN LJT-R,TV-R, AMPHE-LITE AND SJT-R CONNECTORS, CONTꢀ
Dualok
II
Contact Part Number
Crimping Tools
Installation Tools
Contact
Size
I
Cable
(Termination Instruction Sheet)***
SJT
Pin
Socket
Inner Contact
Crimp Ferrule
Insertion
Removal
Accessories
Aquacon
Herm/Seal
PCB
M22520/5-01
with die set
M22520/5-05 (B)
or M22520/5-41
(B)
or M22520/10-01
with Die Set
M22520/10-07 (B)
Haveg 51-03111, Tensolite
28895/2X1
21-033102-022
(L-1107-B)
21-033101-022
(L-1107-F)
M22520/2-01
with Positioner
M22520/2-31**
or solder
21-033102-021
(M39029/60-367
Supersedes
MS27536)
21-033101-021
(M39029/59-366
Supersedes
MS27535)
RG-180B/U, RG-195A/U,
Raychem 9528A1318
HIGH
SPEED
(L-1107-A)
(L-1107-E)
Fiber
M22520/5-01
with Die Set
M22520/5-37 (B)
or
M22520/10-01
with Die Set
M22520/10-15 (A)
Optics
M22520/2-01
with Positioner
M22520/2-31
Contacts
Connectors
Cables
RD-316 Double Shield
(M17/152-00001)
21-033102-025
(L-1107-J)
21-033101-025
(L-1107-N)
Raychem 7524D5111-9
(triax cable - contact will
terminate inner coax portion
only)
21-033102-026
(L-1107-M)
21-033101-026
(L-1107-M)
Hand
inserted
8
11-9170 or MS
M22520/2-01
with Positioner
M22520/2-10
M22520/5-01
with Die Set
M22520/5-45 (A)
RG-400, ECS3C058A
ECS352001 ECS432101
21-033102-027
(L-1286-B)
21-033101-027
(L-1293-B)
M22520/5-01
with Die Set
M22520/5-05 (B)
RG-58 (M17/155-00001),
M17/028-RG-058 RG303
Times LMR-195-UF
21-033102-029
(L-1107-AA)
21-033101-029
(L-1107-Y)†
Solder
21-033102-036
(L-1107-P)
21-033101-036†
(L-1107-Q)
5021D1331-0
M22520/5-01
with Die Set
M22520/5-05 (B)
or
M22520/10-01
with Die Set
M22520/10-07 (B)
M22520/2-01
with Positioner
M22520/2-31
5M2869-001
ESC432101 BMS13-65
21-033102-037
(L-1107-V)
21-033101-037
(L-1107-W)
21-033102-039
(L-1107-AC)
21-033101-036†
(L-1107-AB)
5022A1311-0
FA-19X
M22520/2-01
with Positioner
K1106
M22520/5-01
with Die SetY25
(B)
21-033652-001
(L-2091-A)
21-033653-001
(L-2091-B)
M22520/5-01
with Die Set
M22520/5-05 (B)
T Flex-402 Utiflex UFB142G
Raychem 7524A1311
21-033102-041
(L-1107-AG)
21-033101-041
(L-1107-AF)
Solder
NOTE: SAE AS39029 supersedes MIL-C-39029
† Consult Amphenol Aerospace for current release of this contact or instruction
sheet if applicable
**When inner contact is installed by crimping onlyꢀ 11-10134 Expander Tool
Kit must be used to assemble rear insulator over contactꢀ
***Termination instructions are packaged with each contact and can be found
on-line at: wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
NOTE: Contacts can be ordered by part numbers given in chart
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part
numbers indicate applicable die closureꢀ Commercial equivalents with the same
die closure dimension may be usedꢀ
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
247
Matched Impedance Coaxial Contacts
for MIL-DTL-38999
Amphenol
Aerospace
Amphenol® Matched Impedance Size 12 Coaxial Contacts for
38999
RF/Microwave, High Frequency and High Performance Requirements
III
The matched impedance coax contact is available in size 12ꢀIt incorporates a captivated
inner contact which “snaps into” the outer contact preventing displacement or
pull-back of the inner contact in situations where the cable may be bentꢀ
HD
Dualok
II
I
SJT
TYPICAL MATCHED IMPEDANCE
COAX SOCKET CONTACT
has socket outer contact with a captivated
pin inner contact
Accessories
Aquacon
Herm/Seal
PCB
TYPICAL MATCHED IMPEDANCE
COAX PIN CONTACT
has pin outer contact with a captivated
socket inner contact
HIGH
SPEED
Design features and benefits of the Matched Impedance:
• For use in 90 degree angle or bent cable applications
• Provides 50 ohm matched impedance resulting in low VSWR
and low insertion loss
• Frequency range for a mated pair extends to 3 GHz and beyond,
higher than other coaxial contacts previously offeredꢀ
• Ideally suited for D38999 high performance and MIL-STD-1760
high band coaxial contact requirements
Fiber
Optics
Contacts
Connectors
Cables
High Performance Size 12 and 8 Coax
50 or 75 Ohm matched
Matched Impedance
Coax Contact Performance:
Electrical Specifications:
LJT-R, MIL-DTL-38999 Series I, JT-R, MIL-DTL-38999 Series II, and
TV-R, MIL-DTL-38999 Series III
• Contact impedance = 50 ohms nominal
Pin
Socket
• Frequency range = 0–3 GHz Operable at higher
frequencies depending on cable selectionꢀ
Consult Amphenol for detailsꢀ
Contact
Size
Use with Cable
Comment
(Termination Instruction (Termination Instruction
Sheet)***
Sheet)***
RG316,
T-Flex-405
Semflex SM405
M39029/102/103
21-033651-011
(L-2092-C)
21-033650-011
(L-2092-C)
• Dielectric withstanding voltage
(for a mated pair):
At sea level = 1000 VRMS
At 50, 000 ftꢀ= 250 VRMS
50W
RG-316,
T-Flex-405
JT-R, MIL-DTL-38999
21-033729-011
(L-2092-P)
Series II, 50W
RD316,
• Insulation resistance: 5 gigaohms minꢀ@ 25°C
• VSWR: 1ꢀ20 + ꢀ04F (F in GHz) maxꢀup to 3 GHz
• Insertion Loss: ꢀ11 fGHz dB maxꢀ
Environmental Specifications:
Filotex,
ET124962,
M17/152-00001
M39029/102/103 Type
21-033651-017
(L-2092-F)
21-033650-017
(L-2092-F)
50W
JN1104*50C
21-033214-042
(L-2092-D)
JN1088WT
21-033213-042
50W
• Thermal limits: –55 ° to 200°C
PAN6841*50C
21-033650-012
21-033651-012
(L-2092-E)
PAN6422XQ
12
50W
Mechanical Specifications:
RG178,
Gore CXN 3403
M39029/102/103 Type
21-033651-018
(L-2092-K)
21-033650-018
(L-2092-K)
• Mating: slide-on
50W
• Mounting: conforms to M39029/102 & /103
envelope dimensions
21-033729-018
(L-2092-K)
RG178,
Gore CXN 3403
JT-R, MIL-DTL-38999
Series II, 50W
M39029/102/103 Type
21-033651-022
(L-2092-N)
21-033650-022
(L-2092-N)
SFT-316-TR
50W
M39029/102/103 Type
21-033651-025
21-033651-026
Semflex SW060
21-033650-025
21-033650-026
50W
Semflex SW086
(solid inner
conductor)
M39029/102/103 Type
* Add P or S for pin or socket
50W
***Termination instructions are packaged with each contact
and can be found on-line at:
wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
21-033592-001
21-033592-021
21-033592-031
8
8
8
RG-179†
21-033591-001
21-033591-021
21-033591-031
75W
75W
75W
†21-033591-XXX sockets will only mate with Amphenol 21-
0333592-XXX pins
PIC V76261†
Belden 1855A†
248
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Typical Contact Installation Instructions
for Coax Contacts
Amphenol
The following is an example of a contact instruction sheet that would be shipped within the package of contacts for a Crimp, Size 12
Coax Contact for use in Subminiature, D38999 connectorsꢀThe sheet provides detailed instructions for assembling the component
parts and for crimping the contact to coaxial cable, along with the recommended cable and tooling to be usedꢀ Installation instructions
are included within all contacts for D38999 connectorsꢀFor installation instructions for other connector series, there are separate
documents (not included in packaging of parts) as follows: L- 633 for Miniature solder types, L-613 for Miniature SE types, L-660 for
Miniature CE types, and L-650 for MS/Standard and Heavy Duty typesꢀFor any other instructions needed, consult AmphenolꢀMost
installation instructions can be found on-line at wwwꢀamphenol-aerospaceꢀcom (from home page, go to Service Instructions and enter
contact part number or instruction sheet number)ꢀ
38999
III
HD
Dualok
II
I
21-033651-011 (PIN)
21-033650-011 (SOCKET)
SJT
Accessories
Aquacon
Herm/Seal
PCB
Contact, Pin and Socket, Coaxial,
Type LJT-R & TV-R, (MIL-DTL-38999 Series I & III) Crimp,
Size 12
Installation Instructions
See table on reverse side for coaxial cable recommended
and crimp tool informationꢀ
Aꢀ 1ꢀ Slide outer crimp ferrule over cable outer jacket as
shownꢀ
21-033651-011 (PIN)
21-033650-011 (SOCKET)
.330 REF.
OUTER CRIMP FERRULE
CABLE
.135
.195
OUTER JACKET
HIGH
A1 & A2
SPEED
2ꢀ Strip cable outer braid as illustratedꢀEnds must be cut
cleanly and at right angles to the axial plane of the
cableꢀ The cable must not be deformed while making
cutsꢀ
CABLE
DIELECTRIC
CABLE
OUTER BRAID
Fiber
CABLE OUTER BRAID
Optics
.165
A3
3ꢀ Flare outer braid, then strip cable dielectric as shownꢀ
Contacts
Connectors
Cables
CABLE
CENTER
CONDUCTOR
CABLE
Bꢀ 1ꢀ Assemble inner contact assembly over cable center
conductor and cable dielectric until inside bore of
bushing butts against cable dielectricꢀ
.165
REF.
DIELECTRIC
2ꢀ Cable center conductor must be visible through the
inspection hole in the inner contact wire wellꢀ
3ꢀ Crimp inner contact wire well using crimp tool listed in
tableꢀ
CABLE CENTER CONDUCTOR
CABLE DIELECTRIC
INNER CONTACT ASSEMBLY
(SOCKET SHOWN FOR REFERENCE)
B
Cꢀ 1ꢀ Carefully slide outer contact assembly over inner
contact assembly and under cable outer braid until
inner contact butts against insulator shoulder as
illustratedꢀ (Inner contact assembly will snap into the
locked position when fully assembled inside the outer
contact assemblyꢀ)
INSPECTION HOLE
CABLE DIELECTRIC
MUST BUTT
BUSHING
.010 / .030
OUTER FERRULE
OUTER CONTACT ASSEMBLY
(PIN SHOWN FOR REFERENCE)
2ꢀ Bring outer crimp ferrule forward over cable outer
braid as illustratedꢀ (Continue to push the inner
contact assembly fully forward while bringing the
outer crimp ferrule into positionꢀ)
3ꢀ Crimp outer crimp ferrule using crimp tool listed in
table (ꢀ156 Maxꢀ over ferrule after crimping)ꢀ Trim
excess braid ahead of crimp ferrule, if necessaryꢀ
C
CABLE
OUTER BRAID
INNER CONTACT
MUST BUTT INSULATOR
CONTACT INSERTION INTO CONNECTOR
Using insertion tool (part number M81969/8-09 or
M81969/14-04), insert contact assembly into rear connector
grommet holeꢀ Contact must be aligned with hole and not
inserted at an angleꢀPush forward until contact is felt to snap
into position within insertꢀRemove toolꢀ
CONTACT REMOVAL FROM CONNECTOR
Position removal tool (part number M81969/8-10 or
M81969/14-04) around cable and slide tool down wire until
tool tips enter rear grommet and come to a positive stopꢀ
Hold tool tip firmly against positive stop on contact, grip wire
and simultaneously remove tool, contact and cableꢀ
FSCM77820
L-2092-C October 2001
Tools
Amphenol ®
Part Number
Coaxial Cable
Accommodated
Inner Contact
Outer Contact
Positioner
Description
Positioner
(Daniels)
Crimp Tool
Setting
Tool
RG316
(M17/113-RG316)
MH992 (Daniels)
MH992 (Daniels)
MH992 (Daniels)
MH992 (Daniels)
5
4
5
4
K1360
Matched Impedance*
Size 12 Coax
Pin
21-033651-011
21-033650-011
RG179
(M17/094-RG179)
K1360
K1360
K1360
M22520/5-03 (A)
or
M22520/5-35 (B)
M22520/5-01
RG316
(M17/113-RG316)
Matched Impedance*
Size 12 Coax
Socket
RG179
(M17/094-RG179)
* Matched Impedance applies when contacts are terminated to RG316 cable onlyꢀ
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
249
High Frequency Contacts for MIL-DTL-38999
Series III Circular General Description
Amphenol
Aerospace
38999
Amphenol® High Frequency Contacts
III
Amphenol and SV Microwave (an Amphenol company) offer DC to 40 GHz
high frequency size 8, 12 and 16 coaxial contacts for the D38999 Series III
housing and standard insertsꢀThese contacts allow any application to
continue to use the D38999 connector and be able to expand the use to
include the microwave transmission linesꢀFeatures include:
HD
Dualok
II
I
•
•
Superior electrical performance and high frequency capability
Blindmate advantage and maintenance of an accurate phase length
when mated
SJT
Accessories
Aquacon
Herm/Seal
PCB
•
•
Can be terminated to a multiple of cable types depending on the application
Uses standard interfaces based on MIL-STD-348, and can be installed in
any MIL-DTL-38999 size 8, 12 or 16 insert
•
Unique “Float Mount” technology allows for consistent microwave
performance while maintaining tight mechanical tolerances
Subminiature MIL-DTL-38999 Series III
Connector with Size 8 High Frequency Contacts
HIGH
HIGH FREQUENCY CONTACTS
SPECIFICATIONS
SPEED
HIGH FREQUENCY COAX CONTACTS
FOR USE IN D38999, SERIES III CONNECTORS
Fiber
High Frequency
Amphenol Part
Optics
Electrical
Inter-
face
For use
with Cable
Cavity
Size
Piggyback
Grommet
Frequency
Type
(Mated pair size 8 - RG 405 Semi-Rigid Cable)
Number
Contacts
Connectors
Cables
(Termination
Impedance
50 W
Instruction Sheet)
Frequency Range
VSWR
Insertion Loss
DC - 40 GHz
1ꢀ05 +ꢀ01 (freqꢀGHz)
0ꢀ03ꢀ (freqꢀGHz)
21-033449-01HF
(300-17-008)
Socket
Pin
BMZ
BMZ
BMZ
BMZ
40 GHZ TFLEX-405
18 GHZ TFLEX-405
8
8
8
8
21-033321-007
21-033321-007
21-033321-009
21-033321-010
21-033448-01HF
(300-17-008)
Insulation Resistance (Minꢀ) 10,000 M W
Contact Resistance (Maxꢀ)
21-033449-02HF
(300-89-009)
Socket
Pin
Center conductor:
outer conductor:
outer to cable:
6ꢀ0 mW
3ꢀ0 mW
0ꢀ5 mW
21-033448-02HF
(300-89-009)
21-033449-03HF
(300-89-008)
Socket
Pin
Dielectric Withstanding Voltage
Corona Extinction Voltage
RF High Potential Voltage
RF Leakage
1,000 VRMS
250 VRMS
500 VRMS
- (80-freqꢀGHz)
RG-400/
12 GHZ
RG-142
21-033448-03HF
(300-89-008)
21-033449-04HF
(300-89-002)
Socket
Pin
18 GHZ TFLEX-402
21-033448-04HF
(300-89-002)
Materials and Finish
Body and Sleeve
Stainless steel per
AMS-5640 Alloy UNS
S30300 Type 1
Brass per ASTM B16,
Alloy UNS C36000
21-033449-06HF
21-033448-06HF
21-033449-07HF
21-033448-07HF
Socket
Pin
BMA 26ꢀ5 GHZ TFLEX-405
BMA 26ꢀ5 GHZ TFLEX-402
8
8
21-033321-007
21-033321-010
Ferrule
Socket
Pin
Contact & Lock Ring Beryllium copper per ASTM
B196 Alloy UNS C17300, Td04
21-033449-08HF
Insulator
PTFE per ASTM D1710,
Type 1, Grade 1, Class B
Stainless steel per ASTM
A313 Type 631
Socket
BMZ-
LMR-240-
75
2 GHZ
8
21-033321-008
N/A
75
21-033448-08HF
21-033449-09HF
21-033448-09HF
Spring
Ohm
Pin
Socket
Pin
Rear Body & ContactsGold per ASTM B488 Type II,
Code C, Class 1ꢀ27;
SMPM 65 GHZ TFLEX-405
12
over Nickel per AMS-QQ-N-290
Class 1 (60µ inches);
over Copper per MIL-C-14550
(10µ inches)
21-033449-10HF
21-033448-10HF
Socket
Pin
0ꢀ047 Diaꢀ
SMPS 65 GHZ
Cable
16
8
N/A
Passivated per AMS-2700, Type 2
21-033449-11HF
21-033448-11HF
Socket
Pin
BMZ
2 GHZ
RG179
21-033321-007
Environmental
Temperature Range –65°C to +125°C
Corrosion (Salt Spray)MIL-STD-202, Method 101, Condition B
Vibration
Shock
MIL-STD-202, Method 204, Condition D, 20 Gs
MIL-STD-202, Method 213, Condition 1, 100 Gxs
Thermal Shock
MIL-STD-202, Method 107, Condition B, –65°C to +125°C
Moisture Resistance MIL-STD-202, Method 106, Less step 7B
Barometric Pressure (Altitude) MIL-STD-202, Method 105, Condition C, 70,000 ftꢀ
250
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Twinax Contacts for MIL-DTL-38999
General Description, Application Data - Size 10 &12
Amphenol
38999
Amphenol®Twinax Contacts-Were designed for
use with twinax cable in Data Bus systemsꢀTwinax contacts
provide the following benefits:
III
HD
• Protection from magnetic interference
• Protection from electrostatic interference including nuclear
electromagnetic pulse
Dualok
II
I
Center
Conductor
• Meets parameters defined by MIL-STD-1553B
Jacket
Braid
Insulation
SJT
• Maintains shield integrity through a multi-pin circular
connector and does not require contact polarization within
the insert
Accessories
Aquacon
Herm/Seal
PCB
Cable Illustration - Twinax Contact
SIZE 10 & 12 CONCENTRICTWINAX
CONTACTS
The size 12 concentric twinax contact interface was developed for
JN1104 EuroFighter contacts, and can be used in any size 12
cavity M38999 I, II or III or SJT connectorꢀ
Features:
HIGH
SPEED
Fiber
• Operating temperature –55°C to 175°C
• Pins are scoop-proof
Optics
• Meets performance levels of M38999 connector
• 4 components, gold plated crimp termination
• For use with a variety of cables (See chart below)
Contacts
Connectors
Cables
Concentric Twinax Contacts Size 12
TYPICAL ELECTRICAL PERFORMANCE
Size 10 & 12 ConcentricTwinax Contacts
Voltage Rating: 500 Vrms maxꢀ@ sea level
Contact Resistance:
Center @ 1 Amp, 55 millivolts maxꢀvoltage drop @ 25°C
Intermediate @ 1 Amp, 55 millivolts maxꢀvoltage drop @ 25°C
Outer @ 12 Amps, 85 millivolts maxꢀvoltage drop @ 25°C
Operating Frequency: 0–30 MHz
Dielectric Withstanding Voltage:
Center to Intermediate 800 VAC Rms @ Sea Level
Intermediate to Outer 500 VAC Rms @ Sea Level
Unassembled Components of Size
12 Concentric Twinax Contact
SIZE 10 & 12 CONCENTRICTWINAX CONTACTS FOR USE IN D38999 CONNECTORS
Concentric Twinaxial Contact
Part Number
For use with
Cable
Connector
Series
Contact Size
Comments
(Termination Instruction Sheet)**
Pin Socket
M17/176-00002,
ST5M1212-002,
TWC-78-1
21-033909-025 21-033908-025
(L-2092-G) (L-2092-G)
0024A0024, Fileca
F2709-13-CA
21-033909-028 21-033908-028
(L-2092-G) (L-2092-G)
JN1104 Interface
EPD32263A,10612,
GSC-12-2548-00
ASNE0849,
21-033909-029 21-033908-029
(L-2092-H) (L-2092-H)
12
D38999 Series I, III
21-033909-081 21-033908-081
(L-2092-AB) (L-2092-AB)
5PTM1T04-1
21-033909-091 21-033908-091
(L-2092-AC) (L-2092-AC)
VG95218T023D002
Same as -91 except
new ferrule with wire
support
VG95218T023D002,
55PC1221-24
21-033909-101 21-033908-101
(L-2092-AC)
(L-2092-AC)
M17/176-00002,
GSC-12-2549-00
21-033640-025
(L-2092-W)
12
10
JN1104 Interface
D38999 Series II
21-033640-028
0024A0024
5M2022-003
(L-2092-V)
Supplied with
Thermal fit sleeve
21-033844-001 21-033843-001
(L-1255-A) (L-1255-B)
D38999 Series I, III
**Termination instructions are packaged with each contact and can be found on-line at: wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
251
Twinax Contacts for MIL-DTL-38999
General Description, Application Data - Size 8
Amphenol
Aerospace
38999
High performance connectors within the D38999 families are the most
commonly used connectors for incorporation of Twinax contactsꢀThese
connectors offer wide versatility in insert arrangements for not only
concentric Twinax contacts, but also coax, triax, PCB, wire wrap,
thermocouples and EMI filter contactsꢀ
III
HD
Dualok
II
I
Other connectors available with concentric Twinax contacts:
•
•
Wire Integrated Connectors (WICS) for Data Bus Systemsꢀ
Consult Amphenol Aerospace, Sidney, NYꢀ
SJT
Accessories
Aquacon
Herm/Seal
PCB
ARINC 404, ARINC 600 and R27 Series rectangular connectorsꢀ
Supplied by Amphenol Canadaꢀ
SIZE 8 CONCENTRICTWINAX CONTACTS
The size 8 concentric Twinax contact was developed for use in MIL-
STD-1553 Airborne multiplex data bus applications which require high
performance interconnect characteristics in multi-pin connectorsꢀIdeal
for this application need is the high performance Tri-Start connector with
its fully scoop-proof feature of recessed pinsꢀThe concentric Twinax
contact is crimp terminable to twisted shielded cableꢀFeatures include:
HIGH
SPEED
Fiber
MIL-DTL-38999 Series III Connector with Twinax
Contacts and Standard Contacts
Optics
Contacts
Connectors
Cables
• Provides protection from magnetic and electrostatic interference
including nuclear electromagnetic pulse
• Maintains shield integrity through a multi-pin circular
connector and does not require contact polarization within the insert
• 175°C rated and meets performance levels of MIL-DTL-38999
Series III connectors
• MIL-C-17/176-00002 cable termination
• Gold plated full crimp termination contacts qualified to
M39029/90 & /91
• Integral part of the MIL-STD-1760 interconnection system
• Also available in modified but intermateable versions for termination
to a host of cables (See chart on next page)
Concentric Twinax Contacts Size 8
TYPICAL ELECTRICAL PERFORMANCE
Size 8 ConcentricTwinax Contacts
Voltage Rating: 500 Vrms maxꢀ@ sea level
Contact Resistance:
Center @ 1 Amp, 55 millivolts maxꢀvoltage drop @ 25°C
Intermediate @ 1 Amp, 55 millivolts maxꢀvoltage drop @ 25°C
Outer @ 12 Amps, 75 millivolts maxꢀvoltage drop @ 25°C
Operating Frequency: 0–20 MHz
Dielectric Withstanding Voltage:
Center to Intermediate: 1000 VAC Rms @ Sea Level
Intermediate to Outer: 500 VAC Rms@ Sea Level
SHORT PROFILETWINAX CONTACT OPTION
A Short Profile size 8 Twinax is available that can be used with a low
profile right angle backshell and can offer increased packaging efficiencyꢀ
Consult Amphenol Aerospace for further informationꢀ
Short Profile Twinax vs
Standard Length Twinax Contact
252
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Twinax Contacts for MIL-DTL-38999
Amphenol
General Description, Application Data - Size 8, contꢀ
SIZE 8 CONCENTRICTWINAX CONTACTS FOR USE IN D38999 CONNECTORS
38999
Size 8 Concentric Twinaxial Contact
Part Number
(Termination Instruction Sheet)**
III
For use with
Cable
Connector
Series
HD
Pin
Socket
Comments
Dualok
M17/176-00002
AS39029/113-625 & /114-628 (Amphenol)
Supplied with heat shrink seal
AS39029/90/91 (Amphenol)
Supplied with heat shrink seal
M39029/90/91 (Pyle)
21-033190-625
21-033191-628
(L-1253-AG)
(L-1253-AG)
II
M17/176-00002,
5PTM1T04-2
21-033190-529
21-033191-530
I
(L-1253-A)
(L-1253-B)
T3-46T08-LD
T3-47T08-LD
SJT
M17/176-00002
(PN-430)
(PN-430)
Supplied with heat shrink seal
Accessories
Aquacon
Herm/Seal
PCB
21-033190-000
21-033191-000
M17/176-00002
Without seals
Supplied with piggyback grommet seal
Without seals
(L-1253-A)
(L-1253-B)
21-033190-001
21-033191-001
M17/176-00002
(L-1253-A)
(L-1253-B)
21-033191-026†
21-033190-026
(L-1253-AA)
Raychem 10612, 5M2022-003
Raychem 10614, EPD22189B,
7724C8664, 05A0771,
GC875TM24H, T10971
Raychem 10613,
PAN711-6421, 23089/RC
Raychem 10613,
PAN711-6421, 23089/RC
Raychem 10613,
PAN711-6421, 23089/RC
21-033190-022
21-033191-022
HIGH
Without seals
(L-1253-C)
(L-1253-D)
SPEED
21-033190-027
21-033191-027
Fiber
Supplied with heat shrink seal
Supplied with piggyback grommet seal
Without seals
(L-1253-K)
(L-1253-L)
Optics
21-033190-029
21-033191-029
(L-1253-K)
(L-1253-L)
Contacts
Connectors
Cables
21-033190-030
21-033191-030
(L-1253-K)
(L-1253-L)
GSC-12-2548-00,
7726D0664, ASNE 08072003-09
21-033190-040
21-033191-040
Supplied with heat shrink sleeve
Supplied with piggyback grommet seal
Supplied with piggyback grommet seal
Supplied with heat shrink seal
Without seals
(L-1253-S)
(L-1253-T)
21-033190-081
(L-1253-W)†
21-033191-081
Axon P517417
(L-1253-Y)†
21-033191-261†
21-033190-262†
21-033190-261
(L-1253-AA)
Raychem 10612, 5M2022-003
Raychem 10612, 5M2022-003
21-033190-262
(L-1253-AA)
Raychem 10614,
7724C8664
T3-46TB08-LD
T3-47TB08-LD
(PN-494)
(PN-494)
T3-467C08-LD
T3-47TC08-LD
D38999
Series I, III
7820D0111 (20 AWG)
Gore CXN2268
Without seals
(PN-537)
(PN-537)
Short profile
Supplied with heat shrink seal (ꢀ465)
Short profile
T3-46TE08-LD
T3-47TE08-LD
(PN-1001)
(PN-1001)
T3-46TD08-LD
T3-47TD08-LD
M17/176-00002
M17/176-00002
M17/176-00002
(PN-1000)
(PN-1000)
Supplied with heat shrink seal (ꢀ465)
Short profile
Without seals (ꢀ263)
Short profile
Supplied with piggyback grommet seal (ꢀ465)
21-033910-015†
21-033922-015
(PN-1005)
(PN-1005)
21-033617-001
(REF PN-100)
21-033922-015
(PN-1005)
Short profile
Supplied with heat shrink seal (ꢀ465)
T3-46TF08-LD
T3-47TF08-LD
Gore CNX2702
M17/176-00002
(PN-1002)
(PN-1002)
P-209546-27†
Short profile
Without seals (ꢀ303)
S280W502-1, Fileca F2709-13-CA,
HS5930, Raychem 10602 0024G0024,
0024A0024
21-033190-070
21-033191-070
Without seals
(L-1253-U)
(L-1253-V)
S280W502-1, Fileca F2709-13-CA,
HS5930, Raychem 10602 0024G0024,
0024A0024 Tensolite 24463/9P025x-2(LD)
S280W502-1, Fileca F2709-13-CA,
HS5930, Raychem 10602 0024G0024,
0024A0024
21-033190-071
21-033191-071
Supplied with piggyback grommet seal
Supplied with heat shrink seal
(L-1253-U)
(L-1253-V)
21-033190-072
21-033191-072
(L-1253-U)
(L-1253-V)
21-033190-090†
21-033190-091†
21-033190-092†
21-033191-090
0024A0311, PIC E10244
0024A0311, PIC E1024
0024A0311, PIC E1024
M17/176-00002
Without seals
(L-1253-AD)
21-033191-091
(L-1253-AD)
Supplied with piggyback grommet seal
Supplied with heat shrink seal
21-033191-092
(L-1253-AD)
M39029/113-625 & /114-628
Supplied with heat shrink seal
21-033190-625
(L-1253-AG)
21-033191-628
(L-1253-AG)
**Termination instructions are packaged with each contact and can be found on-line at: wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
† Consult Amphenol Aerospace for current release of this contact or instruction sheet if applicableꢀ
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
253
Triax Contacts for MIL-DTL-38999
General Description, Application Data
Amphenol
Aerospace
Amphenol® Triax Contacts-Provide additional shielding
when terminated to triax cable having solid or stranded center
conductorsꢀAmphenol supplies triax contacts in sizes 8, 10 and 12
and they are ideally suited for use in D38999 Series I, II and III
circular connectorsꢀ
Features and benefits of Amphenol triax contacts include:
• Incorporates three conductors, designed for use with triax cable
• Each of the three conductors are separated by dielectric
insulation to isolate ground planes
• Shielding effectiveness is improved with two isolated shields
• May be specified for direct connection to printed circuit boards
• May be mixed with coax, twinax and power contacts in a
single connector
38999
Jacket
Insulation
III
HD
Dualok
II
I
Center
Conductor
Braid
Cable Illustration - Triax Contact
SJT
Accessories
Aquacon
Herm/Seal
PCB
TYPICAL ELECTRICAL PERFORMANCE
Size 8, 10 and 12Triax Contacts
Contact Resistance:
HIGH
Center @ 1 Amp, 120 millivolts maxꢀvoltage drop @ 25°C
Intermediate @ 1 Amp, 60 millivolts maxꢀvoltage drop @ 25°C
Outer @ 12 Amps, 90 millivolts maxꢀvoltage drop @ 25°C
SPEED
Fiber
Optics
Operating Frequency:
Size 12: 0-30 MHz
Size 10: 0-300 MHz
Size 8: 0-500 MHz
Triax Size 8 Pin Contact
Contacts
Connectors
Cables
Dielectric Withstanding Voltage:
Center to Intermediate 800 VAC Rms @ Sea Level
Intermediate to Outer 500 VAC Rms @ Sea Level
Insulation Resistance:
1000 megohms minimum @ 25°C
Triax Size 12 Socket Contact
SIZE 8, 10 & 12TRIAX CONTACTS FOR USE IN D38999 SERIES I & III CONNECTORS
Size 8, 10, 12 Triax Contact Part Number
For use with
(Termination Instruction Sheet)**
Size
Comments
Cable
Pin
Socket
5M2397-002, 81264-02, RGX-179, RT-179,
Champlain 81-00321A, Tensolite
28883/02060X-1(LD),
7528A5314, Thermatics 12447, 28883/02060X-1,
RTG 179
21-033198-003
21-033197-003
8
(L-1254-F)
(L-1254-E)
21-033198-011
21-033197-011
752866314, 7528G6314
8
8
(L-1254-V)
(L-1254-T)
5M2559-001, 81264-01,
Tensolite 28598/9J063T-1, Teledyne 13809,
Cheminax 9530F5214
21-033198-004
21-033197-004
(L-1254-D)
(L-1254-C)
ST5M1323-001, Champlain 81-00700,
Teledyne 11914/1, Times AA6603,
Tensolite 26895/90334X-1
21-033198-010
21-033197-010
8
8
(L-1254-S)
(L-1254-S)
Tyco 7530A5314
21-033198-014
21-033197-014
21-033800-001
21-033801-001
5M2397-002
10
12
12
12
12
(L-1256-A)
(L-1256-B)
21-033909-012
21-033908-012
JN1104 Interface
JN1088WU (75W), JN1088WT (50W)
GSC-03-81497-00 (75W)
GSC-03-81497-00 (75W)
(L-1256-J)
(L-1256-J)
21-033909-023
21-033908-023
Replaced by -33 with
improved rear insulator
(L-1256-M)
(L-1256-M)
21-033909-033
21-033908-033
(L-1256-P)
(L-1256-P)
JN1104 Interface
Harbour TRX179, Times Microwave AA-6151
(RT-179), Axon RGX-179, 540-1050-000 (75W)
21-033909-071
(L-1256-AA)
21-033908-071
(L-1256-AA)
(Consult with
Amphenol for
availability)
Special design with triax
mating end and twinax
cable termination
21-033724-015
10602 (Twinax)
8
(L-1255-C)
**Termination instructions are packaged with each contact
and can be found on-line at:
wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
254
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Coax,Twinax &Triax PCTail Contacts
General Description, Application Data
Amphenol
Amphenol® Printed CircuitTail Contacts
38999
are currently supplied as follows:
III
•
•
•
8, 12 and 16 Coax
8, 10 and 12 Twinax
8 Triax (socket only)
HD
Dualok
PC Tail shielded contacts provide a cost effective packaging
solution for limited space applications where connectors are
attached to printed circuit boardsꢀHigh reliability is assured
with factory pre-assembled contacts and standardization
termination to the boardꢀPC Tail contacts are available for
MIL-DTL-38999 Series I and III circular connectors and also
for ARINC 404, ARINC 600 and R27 rectangular connectorsꢀ
The following pages show the available PC Tail contact part
numbers for 38999 Circular connectorsꢀSee page 265 & 266
for information on twinax contacts for ARINC Rectangular
connectors along with compatible cable terminationsꢀ
Consult Amphenol Aerospace for further information on the
applicable tooling for these contactsꢀ
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
HIGH
PC Tail Coax and Twinax Contacts
for Attachment to Printed Circuit Boards
SPEED
Fiber
Optics
Contacts
Connectors
Cables
TYPICAL ELECTRICAL PERFORMANCE
Size 8, 12 & 16 PCTail Coax Contacts
Contact Resistance:
Center @ 1 Amp, 55 millivolts maxꢀvoltage drop @ 25°C
Outer @ 1 Amp, 55 millivolts maxꢀvoltage drop @ 25°C
Operating Frequency: 0–500 MHz
Dielectric Withstanding Voltage:
Center to Outer 500 VAC Rms @ Sea Level
Insulation Resistance
1,000 megohms minimum @ 25°C
TYPICAL ELECTRICAL PERFORMANCE
Size 8, 10 & 12 PCTailTwinax Contacts
Contact Resistance:
Center @ 1 Amp, 55 millivolts maxꢀvoltage drop @ 25°C
Intermediate @ 1 Amp, 55 millivolts maxꢀvoltage drop @ 25°C
Outer @ 1 Amp, 55 millivolts maxꢀvoltage drop @ 25°C
Operating Frequency: 0–20 MHz
Size 8, PC Tail Twinax Socket Contact
for use in D38999 Connectors
Dielectric Withstanding Voltage:
Center to Intermediate 500 VAC Rms @ Sea Level
Intermediate to Outer 500 VAC Rms @ Sea Level
Insulation Resistance
1,000 megohms minimum @ 25°C
TYPICAL ELECTRICAL PERFORMANCE
Size 8 PCTailTriax Contacts
Contact Resistance:
Center @ 1 Amp, 55 millivolts maxꢀvoltage drop @ 25°C
Intermediate @ 1 Amp, 55 millivolts maxꢀvoltage drop @ 25°C
Outer @ 1 Amp, 55 millivolts maxꢀvoltage drop @ 25°C
Operating Frequency: 0–500 MHz
Dielectric Withstanding Voltage:
Center to Intermediate 500 VAC Rms @ Sea Level
Intermediate to Outer 500 VAC Rms @ Sea Level
Insulation Resistance
1,000 megohms minimum @ 25°C
D38999 Connector with PC Tail Coax Contacts,
Sealing Plugs in unused contact cavities and
PC Tail Alignment Disc
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
255
Coax,Twinax &Triax PCTail Contacts
Application Data, contꢀ
Amphenol
Aerospace
38999
PCTAIL COAX,TWINAX, ANDTRIAX CONTACTS FOR USE IN D38999 SERIES I & III CONNECTORS
III
PC Tail Coax
Contact Part Number
PC Tail Twinax Contact
Part Number
PC Tail Triax
Contact Part Number
HD
Dualok
Size
8 Pin
Tails*
PCB 2 tails
Comments
21-033733-007
21-033733-002
21-033733-004
21-033733-005
21-033733-009
21-033733-008
21-033426-001
II
I
8 Pin
PCB 2 tails
PCB 2 tails
PCB 4 outer tails, 1 inner
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 3 tails
PCB 3 tails
PCB 3 tails
PCB 3 tails
PCB 3 tails
PCB 3 tails
PCB 3 tails
PCB 3 tails
PCB 3 tails
PCB 9 tails
PCB 9 tails
PCB 3 tails
PCB 3 tails
PCB 3 tails
PCB 3 tails
PCB 3 tails
PCB 3 tails
For epoxy filled connector
For epoxy filled connector
8 Pin
SJT
8 Pin
Accessories
Aquacon
Herm/Seal
PCB
8 Pin
8 Pin
8 Socket
8 Pin
21-033967-115
21-033967-125
21-033967-015
21-033967-045
21-033967-055
21-033967-065
21-033967-085
21-033967-095
P-209550†
8 Pin
8 Pin
HIGH
SPEED
8 Pin
8 Pin
Fiber
Optics
8 Pin
8 Pin
Contacts
Connectors
Cables
8 Pin
M39029/90/91 Interface
8 Pin
8 Pin
P-209532-1
8 Pin
P-209532-2
8 Socket
8 Socket
8 Socket
8 Socket
8 Socket
8 Socket
21-033921-015
21-033921-045
21-033921-035
21-033921-065
21-033921-075
21-033921-115†
AS39029/114 Type
(with hood)
AS39029/114 Type
(with hood)
M39029/90/91 Interface
ꢀ040 diaꢀtails
8 Socket
8 Socket
8 Socket
21-033479-001
21-033479-021
21-033921-105†
PCB 3 tails
PCB 3 tails
PCB 3 tails
8 Socket
8 Socket
8 Socket
8 Pin
DB-109002
21-033919-015
21-033919-025
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 3 tails
PCB 3 tails
PCB 3 tails
PCB 3 tails
PCB 2 tails
M39029/91 Interface
Outer body grounded to shell
21-033828-001
21-033828-021
21-033828-041
21-033840-001
8 Pin
8 Pin
8 Socket
8 Socket
21-033840-021
21-033841-001
Outer body grounded to shell
8 Socket
10 Pin
PCB 2 tails
PCB 2 tails
Outer body grounded to shell
Outer body grounded to shell
21-033844-002†
12 Socket
* Consult Amphenol Aerospace for tail configurations and tail diametersꢀ
† Consult Amphenol Aerospace for current release of this contactꢀ
256
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Coax,Twinax &Triax PCTail Contacts
Application Data, contꢀ
Amphenol
38999
PCTAIL COAX,TWINAX, ANDTRIAX CONTACTS FOR USE IN D38999 SERIES I & III CONNECTORS
III
PC Tail Coax
Contact Part
Number
PC Tail Twinax
Contact Part
Number
PC Tail Triax
Contact Part
Number
HD
Dualok
Size
12 Pin
Tails*
PCB 2 tails
Comments
II
21-033686-008
21-033686-009
21-033686-005
21-033686-010
21-033686-013
21-033687-006
21-033687-007
21-033686-016†
21-033614-001
21-033614-021
21-033614-041
21-033611-003
21-033440-001
21-033430-001
21-033430-021
21-033430-041
12 Pin
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 3 tails
PCB 2 tails
PCB 2 tails
I
Outer tail clip type
12 Pin
SJT
12 Pin
Accessories
Aquacon
Herm/Seal
PCB
12 Pin
Outer tail clip type
12 Pin
For epoxy filled connector
12 Pin
12 Pin
12 Socket
12 Socket
12 Socket
12 Socket
12 Socket
12 Socket
12 Socket
12 Socket
12 Pin
HIGH
SPEED
Fiber
Optics
Outer tail clip type
Contacts
Connectors
Cables
Outer tail clip type, M38999 Series II
M38999 Series II
M38999 Series II
21-033633-001†**
PCB 4 tails
PCB 4 tails
PCB 4 tails
PCB 4 tails
PCB 4 tails
PCB 4 tails
PCB 4 tails
PCB 2 tails
PCB 90 degree, 2 tails
PCB 2 tails
PCB 1 tail
12 Pin
21-033633-002**
21-033633-006**
21-033633-007**
21-033393-006**
21-033393-005**
21-033433-001**
12 Pin
JN1104 Interface
12 Pin
12 Socket
12 Socket
12 Socket
16 Pin
M38999 Series II, JN1104 Interface
21-033856-015
21-033856-025
21-033856-065
21-033634-015
21-033634-035
21-033634-045
21-033386-001
21-033857-001
21-033857-008
21-033857-007
21-033610-001
21-033610-002
21-033441-001
21-033606-001
21-033606-021†
21-033606-031†
21-033610-003
21-033857-003
16 Pin
16 Pin
16 Pin
Outer body grounded to shell
Outer body grounded to shell
16 Pin
PCB 1 tail
16 Pin
PCB 1 tail
16 Pin
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
PCB 2 tails
16 Socket
16 Socket
16 Socket
16 Socket
16 Socket
16 Socket
16 Socket
16 Socket
16 Socket
16 Socket
16 Socket
M38999 Series II
* Consult Amphenol Aerospace for tail configurations and tail diametersꢀ
** Size 12 twinax and triax contacts are intermatableꢀ
† Consult Amphenol Aerospace for current release of this contactꢀ
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
257
Insert Arrangements - MIL-DTL-38999
Incorporating Coax, Twinax andTriax Contacts
Amphenol
Aerospace
38999
Front face of pin inserts illustrated
III
D
A
B
A
HD
D
B
B
A
C
A
C
Dualok
C
B
II
I
Insert Arrangement
Connector Series
Service Rating
9-5
TV
10-2
SJT
11-2
12-3
JT
13-3
LJT
12-4
13-4
14-4
JT
15-4
LJT
LJT,TV
JT, SJT
LJT,TV
SJT
Grounded
1
I
II
3
I
I
Accessories
Aquacon
Herm/Seal
PCB
Number of Contact
Contact Size
2
4
4
8 Twinax
16
16
16
12
A
A
L
E
A
K
A
B
K
A
J
M
B
L
B
C
G
B
E
B
C
R
N
P
H
HIGH
J
H
F
D
H
F
C
D
D
SPEED
M
G
D
D
C
E
G
C
E
F
E
F
Fiber
Optics
Insert Arrangement
14-5
15-5
14-15
15-15
14-68 15-68
14-97
15-97
16-6
17-6
Contacts
Connectors
Cables
Available in
Connector Series
LJT,TV
LJT,TV
JT, SJT
JT, SJT
JT
LJT
JT, SJT LJT,TV
JT, SJT LJT,TV
Service Rating
Number of Contact
Contact Size
II
I
I
I
I
5
14
20
1
8
8
4
6
16
16
16
20
16
12
1
K
A
A
R
A
A
B
B
J
T
S
P
C
U
L
G
B
Y
B
D
H
N
17
C
N
Z
D
E
M
H
X
6
V
M
W
D
G
F
C
L
F
K
J
F
G
30
11
E
E
D
C
H
Insert Arrangement
Connector Series
Service Rating
16-8
17-8
LJT,TV
16-13
JT, SJT
I
17-13
LJT
16-99
17-99
17-2
17-22
JT, SJT
JT, SJT LJT,TV
LJT
TV
LJT
TV
II
I
M
Coax
Number of Contact
Contact Size
8
13
16
21
20
2
38
1
8
2
2
8
16
16
22D
12
A
S
R
A
T
f
A
V
J
A
B
V
B
S
d
U
T
d
W
1
C
P
R
C
F
U
U
C
14
2
H
B
13
22
B
c
K
L
12
e
3
16
15
23
11
21
c
V
P
D
E
W
N
e
D
b
g
h
17
G
C
g
f
b
X
W
N
Z
J
M
E
a
Y
Z
Y
a
F
D
N
X
K
24
7
M
L
20
F
4
10
18
6
S
E
19
9
K
L
G
G
5
E
R
M
8
K
J
H
H
Insert Arrangement
Connector Series
Service Rating
17-25
LJT
M
18-11
JT, SJT
II
19-11
18-28
JT
19-28
LJT
18-30
JT
19-30
LJT
19-31
TV
M
LJT,TV
I
I
Number of Contact
Contact Size
22
22D
2
8
11
16
26
20
2
29
20
1
2
8
1
12
22D
16
16
12
The insert arrangements shown on this page and the next page represent
the most readily available patterns within the 38999 Circular Seriesꢀ If you
require other arrangements than what are shown here, consult Amphenol
for further availabilityꢀ In most cases, unless otherwise stated, size 8
and size 12 cavities can be filled with either coax, twinax, triax or power
contactsꢀ
CONTACT LEGEND
8
10
12
16
20
22D
Power
Coax/Twinax/ Twinax/Triax/ Coax/Twinax/
Coax or
Power
Power
Triax or Power
or Power
Triax or
Power
258
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Insert Patterns - MIL-DTL-38999
Incorporating Coax,Twinax andTriax Contacts
Amphenol
38999
Front face of pin inserts illustrated
III
HD
Dualok
A
J
A
M
U
A
L
A
L
T
B
H
M
F
K
K
C
B
B
D
B
H
F
S
N
N
II
K
J
J
D
C
G
C
L
J
R
P
G
I
P
C
S
H
H
E
D
F
D
R
SJT
G
E
G
F
E
E
Accessories
Aquacon
Herm/Seal
PCB
Insert Arrangement
Connector Series
Service Rating
18-68
JT
19-68
LJT
18-96
20-11
21-11
20-16
21-16
JT
I
JT, SJT LJT,TV
JT, SJT LJT,TV
I
I
II
Number of Contact
Contact Size
18
16
9
11
12
16
16
HIGH
12
SPEED
Fiber
Optics
N
A
Contacts
Connectors
Cables
W
T
A
A
B
V
j
M
P
B
S
B
U
C
R
X
k
C
T
R
W
Y
D
S
R
i
Z
P
D
E
L
U
V
D
A
X
C
D
h
a
E
r
f
m
V
H
S
g
K
b
q
n
C
B
N
P
c
F
T
U
d
N
p
J
E
M
J
G
F
e
F
M
G
H
L
J
L
G
K
H
K
Insert Arrangement
Connector Series
Service Rating
20-39
21-39
20-75
21-75
20-79
SJT
21-79
LJT
22-21
23-21
LJT,TV
LJT,TV
JT, SJT
SJT
JT, SJT LJT,TV
I
M
4
II
II
Number of Contact
Contact Size
37
20
2
17
21
16
16
8
22D
A
B
Z
a
C
w
Y
b
v
24
23
D
c
1
25
GG
2
u
x
X
22
A
3
E
d
26
44
43
21
20
FF
y
4
9
A
27
M
B
HH
t
W
45
52
46
F
5
6
e
42
28
29
H
B
19
40
18
N
JJ
EE LL
L
C
s
z
f
41
V
51 53 47
L
J
KK
AA
30
DD
S
P
r
G
C
G
U
g
K
D
48
50 49
31
32
CC BB
39
38
37
q
7
h
K
E
T
H
R
p
k
8
33
34
17
16
n
36
J
E
F
D
S
J
m
L
10
15
N
R
K
11
H
F
14
35
G
P
12
13
M
Insert Arrangement
Connector Series
Service Rating
23-54
TV
M
23-97
LJT
II
23-99
LJT
II
24-4
25-4
JT, SJT LJT,TV
I
Number of Contact
Contact Size
40
22D
9
4
16
11
48
20
8
16
12
16
16
16
CONTACT LEGEND
8
10
12
16
20
Power
22D
Power
Coax/Twinax/ Twinax/Triax/ Coax/Twinax/
Triax or Power
Coax or
Power
or Power
Triax or
Power
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
259
Insert Patterns - MIL-DTL-38999
Incorporating Coax, Twinax andTriax Contacts
Amphenol
Aerospace
38999
III
M
A
B
A
A
B
S
B
P
R
Y
C
HD
Dualok
R
Z
L
N
P
C
C
N
Z
P
D
T
S
5
4
K
U
H
V
R
D
Y
1
U
N
E
D
M
II
I
T
6
X
7
M
F
3
J
T
S
E
2
E
a
X
V
L
U
W
G
F
L
G
W
F
SJT
V
K
K
H
G
J
H
Accessories
Aquacon
Herm/Seal
PCB
J
Insert Arrangement
Connector Series
Service Rating
24-19
25-19
24-20
SJT
25-20*
LJT,TV
24-24
25-24
JT, SJT LJT,TV
JT, SJT LJT,TV
I
N
I
Number of Contact
Contact Size
19
12
10
20
13
16
3
4
12
16
12
12
HIGH
8
12
SPEED
(Locations U andY - Dedi-
cated to Fiber Optics)
Fiber
Optics
Contacts
Connectors
Cables
A
B
Y
U
f
A
A
B
X
Z
C
b
B
R
p
C
T
D
g
W
a
S
V
T
n
W
S
N
V
E
D
C
P
h
m
q
e
k
U
b
F
q
X
U
w
c
E
F
R
r
k
D
c
N
V
d
f
m
Y
r
x
t
d
v
a
P
p
d
G
T
h
n
M
e
E
Z
c
W
s
u
Z
S
H
a
G
g
b
e
L
X
F
Y
f
R
J
K
H
M
G
K
P
K
L
J
H
J
N
L
M
Insert Arrangement
Connector Series
Service Rating
24-29
25-29
24-37
25-37
24-43 25-43
JT, SJT LJT,TV
JT, SJT LJT,TV
JT, SJT LJT,TV
I
I
I
Number of Contact
Contact Size
29
16
37
16
23
20
20
16
A
W
A
B
V
t
X
w
B
u
s
Y
C
U
v
AA
z
H
r
Z
D
T
J
q
a
C
E
S
R
p
b
G
L
K
F
n
c
D
m
d
P
y
G
x
k
e
F
N
H
E
g
h
f
J
M
K
L
24-46
SJT
25-46
25-11*
LJT,TV
N
Insert Arrangement
LJT,TV
Connector Series
Service Rating
Number of Contact
Contact Size
I
40
20
4
2
2
9
16
8
20
10
CONTACT LEGEND
* For use in MIL-STD-1760 applications with MIL-DTL-38999 Series IIIꢀ
8
10
12
16
20
Power
22D
Coax/Twinax/ Twinax/Triax/ Coax/Twinax/
Triax or Power
Coax or
Power
Power
or Power
Triax or
Power
260
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
MIL-DTL-5015,MIL-DTL-22992 Circular
Connector Overview
Amphenol
38999
Amphenol’s medium to heavy weight circular include the MS/Standard
MIL-DTL-5015 series and the heaviest weight, largest size circular is the Heavy
Duty MIL-DTL-22992 seriesꢀThese time-tested circulars have been used for
several yearsꢀThey are dependable general duty and environmentally resistant
connectors for military and industrial applicationsꢀ
Shielded coax contacts, although more popularly used in 38999 types and 26482
types, can be incorporated into some arrangements of the 5015 and 22992 type
circularsꢀShielded coaxial contacts within these series are considered MS
modifications to the MIL-spec connector and the coax contacts are pre-installed
in the connectorꢀNormal operating voltage with power contacts only is up to 3000
VAC (RMS) at sea level for MIL-DTL-5015 circularsꢀThe Heavy Duty types are
designed for high current capacity and have current ratings (with power contacts
only) of up to 200 ampsꢀ
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
Standard and Heavy Duty Circular offer these features for contact
termination flexibility:
• Insert arrangements that can incorporate:
• Size 4, 8 & 12 Crimp Coax contacts, pre-installed in the connector
• Wide selection of connector shell styles and sizes
• Standard power contact options within the various connector styles include: solder type,
crimp front release, crimp rear release
• Coax contacts are designed to the same high performance standards as power contactsꢀ
Coax and power contacts may be intermixed with no degradation of connector reliabilityꢀ
MS/Standard MIL-DTL-5015 Type Connectors
HIGH
SPEED
Fiber
Optics
Contacts
Connectors
Cables
Amphenol® MS/Standard Circular
MIL-DTL-5015*Type Connector Family:
Heavy Duty QWLD,
MIL-DTL-22992 Connectors
See MS/Standard catalog 12-020 for complete information on these styles
MS-A, MS-C, MS-E, MS-F, MS-R
• Produced in strict accordance with MIL-DTL-5015
• Threaded coupling, solder or crimp rear insertion contacts
(coax available in crimp type only)
• Class A, Solid Shell - intended for general connector usage
• Class C, Pressurized - for use on pressurized bulkheads or
pressure barriers
• Class E/F, Environmental Resisting - ideally suited for installa-
tion where condensation, vibration and rapid changes in
pressure or temperature are considerations
Amphenol® Heavy Duty Circular
MIL-DTL-22992 Connector Family:
QWLD
• Designed for most power and control circuits
• Military MIL-DTL-22992 qualified versions & proprietary equivalents
See Catalog 12-052 for complete information on these styles.
QWL
• A more compact heavy duty design for industrial power
and control applications
See Catalog 12-053 for complete information on these styles.
• Class R, Lightweight Environmental Resisting - shorter in
length and lighter in weight than Class E
GENERAL ORDERING INFORMATION
Amphenol MS/Standard MIL-DTL-5015 type and Heavy Duty MIL-DTL-22992 type circulars are normally supplied with a full complement
of power contacts, separately packagedꢀCoax contacts are ordered by part number as referenced in the part number charts on the
following pages of this catalog, and are substituted for the power contacts at the time of the cable or equipment assemblyꢀCoax contacts
are pre-installed in these seriesꢀInstallation instructions for the coax contacts for these series are provided in Amphenol document L-650ꢀ
HOW TO ORDER:
1ꢀ Select the coax contacts designed for the cable being used from the chart on page 409 of this catalogꢀ
Select a connector insert from those shown on page 44 which will accommodate the quantity and size of coaxial contacts needed plus
any power contacts requiredꢀ
2ꢀ Determine the MS/Standard or Heavy Duty Series style desiredꢀ(See features of each series referenced above) The catalog
referenced for each series will guide you in determining shell style, finish, service class and insert rotation required for your applicationꢀ
MS/Standard MIL-DTL-5015 Type Connectors (Catalog 12-020 on-line at wwwꢀamphenol-industrialꢀcom)
Catalog 12-052 - MIL-DTL-22992 QWLD Connectors (on-line at wwwꢀamphenol-aerospaceꢀcom)
Catalog 12-053 - QWL Connectors (on-line at wwwꢀamphenol-aerospaceꢀcom)
3ꢀ Consult Amphenol Aerospace with the pertinent cable, contact, insert arrangement and connector style choices for complete
connector part numberꢀ
* Amphenol also offers the following other MIL-DTL-5015 Circular Connectors which are threaded coupling
(consult Amphenol Industrial for availability of shielded contacts in any of these series):
• Amphenol®/Matrix® MIL-DTL-5015 with crimp rear releasable and rear insertable contactsꢀ (See Matrix 5015 section of this catalog)
®
• Amphenol MIL-DTL-5015 Modifications (Ask for Industrial Catalog 12-021)
®
NOTE:
• Amphenol GT Series with reverse bayonet coupling (Ask for Catalog 12-024)
®
MIL-DTL-5015 supersedes MIL-C-5015
MIL-DTL-22992 supersedes MIL-C-22992
• Amphenol AC Threaded and AC-B Bayonet Series
(Ask for Industrial Catalog 12-025)
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
261
Coaxial Contacts for MIL-DTL-5015,
Heavy Duty MIL-DTL-22992 General Description
Amphenol
Aerospace
38999
Amphenol® Coaxial Contacts- Can be incorporated into MS/Standard
MIL-DTL-5015 Type Circular Connectors and Heavy Duty MIL-DTL-22992 Connec-
torsꢀThey offer the same durability advantages and design benefits for reliable
interconnection as the Amphenol coax contacts used in high performance D38999
connectorsꢀA variety of military and commercial shielded cables are accommodated
within these circular seriesꢀ
III
HD
Dualok
II
I
Other features of the coax contacts available for MS/Standard and Heavy Duty
circulars include:
SJT
•
Several insert arrangements that can incorporate:
• Size 4, 8 and 12 coax contacts
Accessories
Aquacon
Herm/Seal
PCB
•
•
•
Advanced shielding wire technology in a rugged military connector
Single connector with multiple coaxial connection eliminates cross-mating
Positive contact captivation - especially important in these series with its much
higher coupling/uncoupling force
HIGH
•
Older shielded cable type availability
SPEED
Fiber
Optics
Contacts
Connectors
Cables
TYPICAL ELECTRICAL PERFORMANCE
Size 4, 8 & 12 Contacts
Contact Resistance:
Center @ 1 Amp, 170 millivolts maxꢀvoltage drop @ 25°C
Outer @ 12 Amps, 150 millivolts maxꢀvoltage drop @ 25°C
Dielectric Withstanding Voltage:
Size 4 & 8: 1,300 VAC Rms @ sea level
Size 12: 1,000 VAC Rms @ sea level
Size 4, 8 & 12: 250 VAC Rms @ 50,000 ftꢀ
Insulation Resistance
Coax Contact, Pin
for use in MS/Standard MIL-DTL-5015 and
Heavy Duty MIL-DTL-22992 Connectors
5,000 megohms minimum @ 25°C
All contacts in these series are non-impedance matched contactsꢀ
Part numbers 21-033063-XX( ) and 21-033064-XX( ) are moisture
seal design (internal O-ring)ꢀ
CONTACT FINISHES:
Suffix
Finish
1
2
3
4
5
E
F
H
0ꢀ00020 minꢀsilver over copper flash
Coax Contact, Socket
for use in MS/Standard MIL-DTL-5015 and
Heavy Duty MIL-DTL-22992 Connectors
0ꢀ00005 minꢀgold (Knoop hardness 130-200) over silver
0ꢀ00010 minꢀgold (Knoop hardness 130-200) over silver
0ꢀ00010 minꢀgold (Knoop hardness 130-200) over copper
0ꢀ00005 minꢀgold (Knoop hardness 130-200) over nickel
0ꢀ00005 minꢀgold (Knoop hardness 90 maxꢀ) over copper
0ꢀ00005 minꢀgold (Knoop hardness 130-200) over copper
0ꢀ00010 minꢀgold (Knoop hardness 130-200) over copper
262
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Coaxial Contacts for MIL-DTL-5015,
Amphenol
Heavy Duty MIL-DTL-22992 Application Data
L
MATING
PIN DIA
H
F
38999
III
HD
Dualok
G
SOCKET
L
H
II
F
I
SJT
MATING
PIN DIA
G
PIN
Accessories
Aquacon
Herm/Seal
PCB
NOTE: All contacts of the same size and the same inner and outer contact diameters (G & H) will mate with each otherꢀ
COAX CONTACTS
For use in MS/Standard MIL-DTL-5015Type and Heavy Duty MIL-DTL-22992Type Connectors
Dimensional Data
Contact Part Number
Finish
on
(See Drawings above)
(See L-650 Termination
Instruction Sheet for all
contacts listed below)**
Crimp Ferrule Tools
L
HIGH
Retainer
Nut
Mating
Parts
(See
H
F
Length Refꢀ
SPEED
Cable
Size
G
Diaꢀ Across
Flats
Wrench
MIL-T-22910/7-1 MIL-T-22520/5-01 MIL-T-229520/10-01
Fiber
Diaꢀ
Pin
Socket
Pin Socket Tool Use with Die Tool Use with Die
Tool Use with Die
Part Number
Optics
Pgꢀ42)
0ꢀ001 0ꢀ004
Part Number
Part Number
Contacts
Connectors
Cables
21-033014-001
21-033034-002
21-033048-002
21-033016-005
21-033013-001
21-033033-002
21-033047-002
21-033015-005
8
8
8
8
8
5
1
††
3
RG-58C/U,
RG-141A/U,
RG-303/U
0ꢀ0355
0ꢀ0010
M22520/5-05 (B)
M22520/5-41 (B)
0ꢀ218 0ꢀ280 1ꢀ481 1ꢀ511 M22910/7-15 (B)
M22520/10-07 (B) 11-8676-2
***
21-033130-002( ) 21-033129-002( )
21-033014-005
21-033016-002
21-033034-005 21-033033-005†
21-033130-005( ) 21-033129-005( )
21-033064-021( ) 21-033063-021( )
21-033013-005
21-033015-002
8
8
8
8
8
5
3
1
***
***
0ꢀ0355
0ꢀ0010
RG-59B/U,
RG-62A/U,
RG-62B/U,
RG-210/U
0ꢀ218 0ꢀ280 1ꢀ481 1ꢀ511
11-8676-3
11-8676-4
M22910/7-18 (B) M22520/5-45 (B)
0ꢀ0400
0ꢀ0010
4
***
0ꢀ344 0ꢀ375 1ꢀ669 1ꢀ605
21-033060-010( ) 21-033059-010( )
21-033014-003
21-033016-001
21-033034-003
21-033130-003( )† 21-033129-003( )†
21-033064-020( )† 21-033063-020( )†
21-033013-003
21-033015-001
21-033033-003
8
8
8
8
8
5
3
1
***
***
0ꢀ0355
0ꢀ0010
0ꢀ218 0ꢀ280
11-8676-2
RG-161/U,
RG-174A/U,
RG-179B/U,
RG-187A/U,
RG-188A/U,
RG-316/U
M22520/5-03 (A)
1ꢀ481 1ꢀ511 M22910/7-12 (B) M22520/5-08 (A) M22520/10-05 (A)
M22520/5-35 (B)
21-033014-021
21-033034-001
21-033048-001
21-033013-021
21-033033-001
21-033047-001
12
12
12
12
5
1
***
***
0ꢀ0200
0ꢀ0005
0ꢀ128 0ꢀ172
11-8676-1
M22520/10-05 (B) 11-8676-1
M22520/10-07 (B) 11-8676-2
21-033130-001( )† 21-033129-001( )†
RG-178B/U,
RG-196A/U
0ꢀ0200
0ꢀ0005
M22520/5-03 (B)
M22520/5-33 (B)
12
5
0ꢀ128 0ꢀ172 1ꢀ481 1ꢀ511 M22910/7-11 (B)
0ꢀ218 0ꢀ280 1ꢀ481 1ꢀ511 M22910/7-15 (B)
21-033014-022† 21-033013-022†
21-033014-006
RG-180B/U, 21-033034-006† 21-033033-006†
21-033013-006
8
8
8
8
5
1
***
***
0ꢀ355
0ꢀ0010
M22520/5-05 (B)
M22520/5-41 (B)
RG-195A/U
RG-212/U
21-033048-003
21-033130-006( )† 21-033129-006( )
21-033047-003
0ꢀ0625
0ꢀ0010
4
***
0ꢀ344 0ꢀ375 1ꢀ669 1ꢀ605 M22910/7-14 (A) M22520/5-39 (A)
11-8676-4
21-033060-011( ) 21-033059-011( )
21-033014-008
21-033034-008
21-033130-008( )† 21-033129-008( )†
21-033013-008
21-033033-008
8
8
8
5
1
***
RG-140/U,
RG-302/U
0ꢀ0355
0ꢀ0010
M22520/5-05 (A)
0ꢀ218 0ꢀ280 1ꢀ481 1ꢀ511 M22910/7-17 (B)
M22520/5-19 (B)
M22520/10-07 (A) 11-8676-2
21-033014-004
21-033034-004
21-033130-004( ) 21-033129-004( )
21-033013-004
21-033033-004
8
8
8
5
1
***
0ꢀ0355
0ꢀ0010
RG-55B/U,
RG-142A/U,
RG-142B/U,
RG-223/U
0ꢀ218 0ꢀ280 1ꢀ481 1ꢀ511
11-8676-2
M22520/5-05 (A)
M22910/7-17 (B)
M22520/10-07 (A)
M22520/5-19 (B)
0ꢀ0625
0ꢀ0010
4
***
0ꢀ344 0ꢀ375 1ꢀ669 1ꢀ605
11-8676-4
21-033060-102( ) 21-033059-012( )
***See finish options for MS/Standard and Heavy Duty contacts listed on page 262ꢀ
† Consult Amphenol Aerospace for current availability of this contactꢀ
Replace the parenthesis of the contact part number with the finish suffix numberꢀ However, CRIMPING TOOLS: Italicized letters in parenthesis that follow
you should consult Amphenol Aerospace regarding the availability of all finish choices for
each part numberꢀ
positioner part numbers indicate applicable die closureꢀ Commercial
equivalents with the same die closure dimension may be usedꢀ
†† 21-033047-X and 21-033048-X are supplied with E (soft gold)
finish on mating socket parts, and F (hard gold) finish on mating pin
partsꢀ**Termination instruction sheet L-650 can be found on-line at:
wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
263
Insert Arrangements - Standard
MIL-DTL-5015, Heavy Duty MIL-DTL-22992
Incorporating Coax Contacts
Amphenol
Aerospace
38999
Front face of pin inserts illustrated
III
HD
D
A
Dualok
D
C
A
B
C
A
II
I
B
C
B
SJT
Accessories
Aquacon
Herm/Seal
PCB
Insert Arrangement
16-10
18-10
18-16
20-4
Connector Series
Service Rating
Number of Contact
Contact Size
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
A
3
A
4
C
1
D
4
12
12
12
12
HIGH
SPEED
Fiber
Optics
F
B
Contacts
Connectors
Cables
A
C
E
G
F
A
F
A
C
G
E
G
B
D
E
F
D
I
H
E
B
D
C
A
D
C
G
I
B
H
Insert Arrangement
Connector Series
Service Rating
20-15
20-16
24-2
24-11
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
A
7
A
D
7
A
Number of Contact
Contact Size
2
7
3
8
6
12
12
16
12
12
M
N
T
H
I
J
N
E
Y
Z
a
b
D
E
F
A
U
c
A
U
A
P
F
K
O
P
R
V
B
V
J
R
S
G
d
B
C
W
C
L
H
W
K
e
X
D
C
B
G
M
T
I
S
L
X
Insert Arrangement
Connector Series
28-6
28-11
32-8
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
MS/Standard, QWLD, QWL
Service Rating
Number of Contact
Contact Size
D
3
4
A
A
4
18
16
6
24
16
12
12
CONTACT LEGEND
The insert arrangements shown on this page represent the most readily available patterns within
the MIL-DTL-5015 and MIL-DTL-22992 Seriesꢀ If you require other arrangements than what are
shown here, consult Amphenol for further availabilityꢀ MS/Standard connectors have over 200 insert
pattern arrangements available, and within these patterns any size 4, 8 or 12 contact cavities can be
incorporated with coax contactsꢀ However, you need to consult Amphenol, Sidney NY for availability
and ordering informationꢀ All coax contacts in the Standard and Heavy Duty series come pre-installed
in connectorsꢀ
4
8
12
16
Coax or Power
Coax/
Twinax/Triax
or Power
Coax/Twinax/
Triax or
Coax or
Power
Power
264
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Rectangular Rack & Panel Connectors
That Incorporate High Speed Contacts
Amphenol
38999
Amphenol provides an impressive array of Rectangular
Interconnection products to meet the needs of high
density systems such as opto-electrical backplanes used
in many applications that include: medical equipment,
IC chip testers, telecommunications, military and
commercial aviation, military ground vehicles,
III
HD
Dualok
II
I
GPS systems, space and industrial applicationsꢀ
SJT
Accessories
Aquacon
Herm/Seal
PCB
ARINC 600 and R27 Rack and Panel connectors can
incorporate:
• Size 8 Coax contacts
• Size 1 and size 5 Coax (consult Amphenol Canada)
• Size 12Twinax contacts
• Size 8 Quadrax contacts
• Size 8 DifferentialTwinax contacts
HIGH
SPEED
Fiber
ARINC 600 Rack and Panel Rectangular Connectors
See Amphenol Canada Publication SL-379, ARINC 600 Rack and
Panel Connectors for complete information.
• The ARINC 600 is the successor to the ARINC 404 for many of
the new avionics designs and offers lower mating force contacts,
increased contact count and a front release, floating keying
system
Optics
ARINC 600 Rack and Panel Connectors
are high density connectors that can
incorporate high speed shielded contacts
Contacts
Connectors
Cables
• ARINC 600 Connectors are a recognized standard rack and
panel connector for aircraft applications with both environmental
and non-environmental versions available
• Designed to meet all relevant ARINC 600 connector specifica-
tions
• Front removable keying posts
• Up to 800 size 22 contact positions in one connector
• Contact options: standard contacts are power/signal crimp rear
release in sizes 12, 16, 20 and 22 in crimp or PCB; or shielded
coax, concentric twinax, quadrax contacts; or fiber optics
• Waveguide connections
R27 Rack and Panel Rectangular Connectors
See Amphenol Canada Publication for R27 Series Connectors for
complete information.
• The R27 Series is a robust rectangular connector designed to
meet or surpass all the requirements of the MIL-DTL-83527
specification and EN 3682 European Standardꢀ
• Well suited for harsh environments - enhanced environmental
sealing, robust and durable shells, EMI shielding spring
• Filtered or non-filtered
R27 Series Rack and Panel Connector
can incorporate high speed shielded contacts
• Connectors, shells, inserts, termination modules and contacts are
sold separately or fully assembled
• Interchangeable insert patterns with ARINC 600 models
• Contact options: standard contacts are power/signal crimp rear
release in sizes 12, 16, 20 and 22 in crimp or PCB; or shielded
coax, concentric twinax, quadrax contacts; or fiber optics
Coax Contact , Size 8 for use in ARINC
Rack and Panel Connectors
Quadrax Contact , Size 8 for use in ARINC
Rack and Panel Connectors
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
265
High Speed Contacts for Rack & Panel
Application Data
Amphenol
Aerospace
38999
III
ARINC 600 & R27 Rack and Panel Connectors
HD
Dualok
QUADRAX CONTACTS
FOR USE IN ARINC 600 & R27 CONNECTORS
Contact Part Number
II
I
Crimping Tools
Outer Contact
(Termination Instruction Sheet)**
Impedance Contact
Cable
(Ohms)
Size
Inner
Contact
Pin
Socket
SJT
Tensolite NF24Q100-01,
24443/9P025X-4(LD),
S280W502-4, 24443/03130X-4(LD),
PIC E51424
Accessories
Aquacon
Herm/Seal
PCB
21-033382-021
(L-2119-AH)
21-033383-021
(L-2119-AH)
100
M22520/2-01
M22520/5-01
with Positioner Daniels K709 with Die Set M22520/5-45
(M22520/2-37)
(Location B)
21-033382-031
(L-2119-I)
21-033383-031
(L-2119-I)
Draka Fileca F-4703-3
Draka Fileca F-4704-5, NF22Q100
JSFY02-1
100
100
110
8
21-033382-101
(L-2119-AS)†
21-033383-101
(L-2119-AS)†
HIGH
21-033382-071
†
21-033383-071
†
SPEED
Fiber
M22520/2-01
M22520/5-01
Tensolite 26473/02006X-4(LD),
Gore RCN8328
21-033382-061
(L-2119-L)
21-033383-061
(L-2119-L)
Optics
150
with Positioner Daniels K709 with Die Set M22520/5-45
(M22520/2-37)
(Location A)
Contacts
Connectors
Cables
DIFFERENTIALTWINAX CONTACTS
FOR USE IN ARINC 600 & R27 CONNECTORS
Contact Part Number
(Termination Instruction Sheet)**
Crimping Tools
Impedance Contact
Cable
(Ohms)
Size
Inner
Contact
Pin
Socket
Outer Contact
21-033378-021
(L-2119-G)
21-033379-021
(L-2119-G)
ABS0386WF24
ASNE0272TK22
100
100
100
100
77
M22520/2-01
with Positioner Daniels K709
(M22520/2-37)
M22520/5-01
with Die Set M22520/5-45
(Location A & B)
21-033378-031
(L-2119-G)
21-033379-031
(L-2119-G)
8
21-033378-041
(L-2119-G)
21-033379-041
(L-2119-G)
ASNE0272TK24
21-033378-051
†
21-033379-051
†
Tensolite 24463/9P025X-2(LD)
GC875TM24H
21-033378-061
(L-2119-AU)
21-033379-061
(L-2119-AU)
21-033378-071
†
21-033379-071
†
110
PCB QUADRAX CONTACTS
FOR USE IN ARINC 600 & R27 CONNECTORS
COAX CONTACTS
FOR USE IN ARINC 600 & R27 CONNECTORS
Contact Part Number
PCB
Quadrax
Contacts
Contact Part Number
Crimping Tools
Impedance Contact
(Termination Instruction Sheet)**
Contact
Size
(Ohms)
Size
Cable
Pin
Socket
Inner
Outer
Pin
Socket
Contact
Contact
PCB (.346
Length)
21-033397-171
M22520/2-01
with Positioner
K1275
M22520/10-01
with Die Set
M22520/10-05 (A)
RG-179,
RG316
21-033676-001 21-033675-001
(L-2090-B) (L-2090-A)
100
8
PCB (.473
Length)
21-033398-261
RG-179,
RG316
8
21-033476-001 21-033475-001
21-033676-002 21-033675-002
5M2869-001
†
†
† Consult Amphenol Aerospace for current release of this contact or
instruction sheet if applicableꢀ
Daniels crimping tools are available from Daniels Mfgꢀ Corpꢀ 6103 Anno
Aveꢀ, Orlando, FL 32809
**Termination instructions are packaged with each contact and can be
TWINAX CONTACTS
FOR USE IN ARINC 600 & R27 CONNECTORS
found on-line at: wwwꢀamphenol-aerospaceꢀcom/serviceinstructionsꢀasp
Contact Part Number
Crimping Tools
(Termination Instruction Sheet)**
Contact
Size
Cable
Inner
Contact
MH992
Outer
Contact
GS200-1
Pin
Socket
EPD 32263,
10612,
GSC-12-2548-00
21-033631-004† 21-033632-003
(L-2092-U)† (L-2092-J)
12
with Positioner with Positioner
K1365 GP959
266
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
Guide for Selecting High Frequency
Contacts and Cables
Amphenol
Date_________________________________________
38999
III
Amphenol
The following check list is provided to help you specify a high
frequency contact and cable system, and it will help our design
team to meet your requirements. You may copy this page and fax it
to Amphenol Aerospace 607-563-5157, attention Contact Design.
Or call 607-563-5011 or 800-678-0141 for assistance.
Salesperson___________________________________
HD
Dualok
CONNECTOR INFORMATION
II
I
Connector Family: TV-R c
LJT-R c
JT-R c
SJT
Other ________________________________________
Insert Arrangement Desired_______________________
Shell Style ____________________________________
Shell Plating___________________________________
CUSTOMER INFORMATION
Accessories
Aquacon
Herm/Seal
PCB
Customer Company Name ____________________________________
Engineer Name _____________________________________________
Program___________________________________________________
Forecast___________________________________________________
HIGH
SPEED
CONTACT INFORMATION
Fiber
CABLE INFORMATION
Optics
Type: Coaxial c Concentric Twinax c
Differential Twinax* c Quadrax* c
Size*: 8 c 12 c 16 c
Contact Impedance Matched? Yes c
50W c 75W c 100W c 150W c Other_______
Triax c
Cable Part Number*_____________________________________
Contacts
Connectors
Cables
Cable Manufacturer _____________________________________
Cable Type: Coaxial c
Triax c Quadrax c
Twinax c
No c
Cable Impedance_______________________________
* if not an RG-Number complete below information:
* Quadrax and Differential Twinax currently available in
size 8 onlyꢀ
OꢀDꢀof Inner Wire_____________________ AWG of Inner Wires _________________
Noꢀof Inner Wire Strands _______________ Material of Inner Wires _______________
OꢀDꢀof Inner Insulation_________________ Material of Inner Insulation ____________
OꢀDꢀof First Braid_____________________ Braid Type_________________________ Braid AWG __________________
(flat, round, wrap)
OꢀDꢀof First Jacket ____________________ Jacket Material _____________________
OꢀDꢀof Second Braid __________________ Braid Type_________________________ Braid AWG __________________
(flat, round, wrap)
OꢀDꢀof Second Jacket _________________ Jacket Material _____________________
It is essential that a 3 foot sample of the cable be supplied for performance and crimp tool developmentꢀ
PERFORMANCE INFORMATION
Electrical Protocol ______________________________________________________________________________________
VSWR Requirement 1ꢀto 1ꢀ _____________ Cross Talk_______________________db
Operating Frequency __________________ Attenuation________________________ Insertion Loss________________
Operating Voltage ____________________
Current Outer Contact______________
VAC (RMS) _________________DC
Amp
Current Inner Contacts_____________ Amp
Application Temperature _______________ Environmental Requirement_________________________________________
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
267
相关型号：
©2020 ICPDF网 联系我们和版权申明