MS3108B24-10SW [AMPHENOL]
MIL Series Connector,;
| 型号： | MS3108B24-10SW |
| 厂家： | 
Amphenol |
| 描述： | MIL Series Connector, 连接器 |
| 文件： | 总71页 (文件大小：2952K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
Amphenol
AC and SAE AS50151
Threaded Standard Cylindrical Connectors
www.amphenol-industrial.com
Table of Contents
Page
Amphenol ® AC Series Connectors
Introduction/General Information.............................................................................................................................................................1
AC Threaded Connector Styles
Wall mounting receptacle .....................................................................................................................................................2
Line receptacle.....................................................................................................................................................................3
Box mounting receptacle......................................................................................................................................................4
Straight plug .........................................................................................................................................................................5
90 degree plug......................................................................................................................................................................6
AC Series how to order.................................................................................................................................................................59
Amphenol® SAE AS50151 Standard Cylindrical Connectors
General Information, Class Designations.................................................................................................................................................7
MS-A, MS-C General Information...................................................................................................................................................8
MS3100A or C wall mounting receptacle ..............................................................................................................................9
MS3101A inline receptacle.................................................................................................................................................10
MS3102A or C box mounting receptacle.............................................................................................................................11
MS3106A straight plug........................................................................................................................................................12
MS3108A 90 degree plug ...................................................................................................................................................13
MS-E/F General Information ........................................................................................................................................................14
MS3100E/F wall mounting receptacle ................................................................................................................................15
MS3101E/F inline receptacle..............................................................................................................................................16
MS3102E box mounting receptacle....................................................................................................................................17
MS3106E/F straight plug....................................................................................................................................................18
MS3108E 90 degree plug...................................................................................................................................................19
MS-R General Information ...........................................................................................................................................................20
MS3100R wall mounting receptacle ...................................................................................................................................21
MS3101R inline receptacle.................................................................................................................................................22
MS3102R box mounting receptacle....................................................................................................................................23
MS3106R straight plug.......................................................................................................................................................24
MS/Standard How to Order..........................................................................................................................................................60
Amphenol AC Threaded/ SAE AS50151 Insert Arrangements, Contacts and Accessories
AC Series/MS insert availability.............................................................................................................................................. 25-27
AC Series/MS insert alternate positioning....................................................................................................................................28
AC Series/MS solder contacts......................................................................................................................................................29
AC Series crimp contacts.............................................................................................................................................................30
®
RADSOK technology and crimp socket contacts.................................................................................................................................... 31
AC Series/MS contact arrangements..................................................................................................................................... 32-53
AC Series thermocouple availability.............................................................................................................................................54
AC Series thermocouple contact arrangements ..................................................................................................................55 – 58
AC Series/MS accessories – sealing gaskets, sealing plugs, sealing ranges...............................................................................61
MS3057A cable clamp, MS3420 sleeve.......................................................................................................................................62
Plug protection caps.....................................................................................................................................................................63
Receptacle protection caps..........................................................................................................................................................64
Dust caps.....................................................................................................................................................................................65
AC Series/MS application tools, torque values.............................................................................................................................66
Reverse Bayonet Coupling 5015 type connectors .................................................................................................................................67
AC Series Threaded Connectors with RADSOK® Contacts ..................................................................................................................68
®
®
Amphe-Power 5015 Connectors (AC threaded series with high amperage RADSOK contacts),
5015 Connectors with PCB contacts............................................................................................................................................68
For additional information on AC Series or SAE AS50151 Connectors for
special application requirements, contact your local sales office or –
Amphenol Corporation
Amphenol Industrial Operations
191 Delaware Avenue
Ask for the Amphenol Industrial North American Product
Overview for additional connectors offered.
Sidney, New York 13838-1395
Telephone: 888-364-9011 Fax: 520-397-7169
www.amphenol-industrial.com
For specific questions about RoHS compliance, consult
Amphenol Industrial Operations, or call the RoHS Product
Compliance and Technical Support line: 1-866-315-8559
This catalog can be viewed, printed and saved
from website: www.amphenol-industrial.com.
Amphenol Industrial is a Certified ISO 9001 Manufacturer.
Amphenol® AC Series
industrial application threaded style connector
AC Threaded Series
Designed with the industrial user in mind, for widely diverse
applications such as mass transportation, automotive, heavy
equipment and geophysical industries, and for the entertain-
ment/ lighting industries, the new AC Series of Connectors
offer the following features:
• Rugged aluminum shells
• Durability and reliability
• Environmentally acceptable shell plating options -
• Conductive and non-conductive
wall mounting receptacle
• Single key/keyway shell polarization
• Five shell styles in sizes 10SL to 40
• Threaded coupling
• Various backshells
• Resilient inserts -
• Outstanding moisture barrier
• High dielectric strength
• High resistance to vibration
• Over 275 insert patterns available
• Alternate insert positioning
box mounting receptacle
• Machined contacts -
• Maximum corrosion resistance
• Maximum current capacity
• Low millivolt drop
• Solder and crimp contacts - silver plated or
optional gold plating
• General duty and environmental versions
• –55° C to +125° C operating temp. range
• Standard application tools
line receptacle
Amphe-PowerTM Connectors - AC Threaded Connectors with
RADSOK® contacts are also available. These are high amper-
age capability connectors designed for the most demanding
industrial and transportation applications.
• The RADSOK contact will handle 50% to 150%
higher amperages than standard contacts (size dependent).
straight plug
• Current Amphe-Power lines support from 35A to
500A continuous duty.
AC Threaded Connectors with RADSOK® High
Amperage Contacts
• RADSOK contacts are available in size 12 (35 amps),
size 8 (70 amps), size 4 (120 amps), and size 0 (250 amps).
See page 31 for more information.
Note: The previous AC-B Bayonet series is replaced by the newer
ACA-B Reverse Bayonet series. For availability of the AC-B,
consult Amphenol Industrial Operations. For information on ACA-B
Reverse Bayonet series connectors see Amphenol catalog IC-4.
RoHS Compliant options available.
1
AC Threaded
wall mounting receptacle
L
A Thread
X
P
S
B
L¹
R
M
AC ( )00A*
AC ( )00E*
A Thread
K
L²
A Thread
PGA
PGR
S
R
P¹
X
P
B
M
K
AC ( )00PG( )*
T
4 Holes
B
M
AC ( )00AF*
AC ( )00F*
K
* To complete order number, see how to order, page 59.
Inches
A
B Min
Full
K
+.020
M
P1 Hex
Flats
Ref
T Dia
+.004
±.005 ±.010 –.002
X Max
O.D.
Cable
.312
.312
.312
.438
.438
.531
.531
.625
.750
.750
.938
.938
1.250
1.375
1.625
Shell
Size
10SL
12S
12
14S
14
16S
16
18
20
22
24
Thread
L
L1
L2
+.010
–.000
.562
.562
.750
.562
.750
.562
.750
.750
.750
.750
.812
.812
.875
.875
.875
P
Max
.894
.894
PGA
Ref
PGR
Ref
R
S
Class 2A
Thread –.010
Max
Max Max
.6250-24UNEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF .450
1.0000-20UNEF .625
1.1250-18UNEF .625
1.2500-18UNEF .625
1.3750-18UNEF .625
1.5000-18UNEF .625
.391
.450
.625
.450
.625
.672
.672
.860
.672
.860
.672
.860
.891
.891
.891
.953
.953
2.129 3.010 2.189
2.129 3.010 2.261
2.524 3.500 2.644
2.201 3.188 2.261
2.524 3.641 2.644
2.201 3.265 2.266
2.524 3.718 2.644
2.596 3.718 2.716
2.654 3.798 2.774
2.654 4.080 2.916
2.885 4.142 3.051
2.885 4.291 3.140
.750
.750
.750
.880
.880
.940
.940
.940
.150/.320
.150/.320
.150/.320
.190/.390
.190/.390
.230/.470
.230/.470
.230/.470
.390/.560
.390/.560
.390/.560
.510/.710
.700/.980
.700/.980
.700/.980
.070/.240
.070/.240
.070/.240
.110/.280
.110/.280
.190/.350
.190/.350
.190/.350
.270/.470
.270/.470
.270/.470
.350/.630
.510/.790
.510/.790
.510/.790
.719
.812
.812
.906
.906
.969
.969
1.000
1.094
1.094
1.188
1.188
1.281
1.281
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.147
.147
.173
.173
.173
.894
1.083
1.083
1.181
1.181
1.300
1.063 1.375
1.156 1.500
1.250 1.625
1.375 1.750
1.562 2.000
1.750 2.250
1.938 2.500
2.188 2.750
1.487 1.060
1.487 1.060
1.712 1.060
1.712 1.300
2.063 1.650
2.283 1.650
2.688 1.650
28
32
36
40
1.7500-18UNS
2.0000-18UNS
2.2500-16UN
2.5000-16UN
.625
.625
.625
.625
1.031 2.943 4.643 3.184
1.031 2.943 4.643 3.245
1.031 3.068 5.635 3.670
Millimeters
B Min
Full
Thread
K
+.51
–.25
M
+.25
–.00
P1 Hex
Flats
Ref
T Dia
X Max
O.D.
Cable
7.93
7.93
Shell
Size
10SL
12S
12
14S
14
16S
16
18
20
22
24
L
Max
L1
Max
L2
Max
P
Max
PGA
Ref
PGR
Ref
R
±.13
S
±.25
+.10
–.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.73
3.73
4.39
4.39
4.39
9.93
17.07
17.07
21.84
17.07
21.84
17.07
21.84
22.63
22.63
22.63
24.21
24.21
26.19
26.19
26.19
54.08
54.08
64.11
55.91
64.11
55.91
64.11
65.94
67.41
67.41
73.28
73.28
74.75
74.75
77.93
76.45
76.45
88.90
80.98
92.48
82.93
94.44
94.44
96.47
103.63
105.21
108.99
117.93
117.93
143.13
55.60
57.43
67.16
57.43
67.16
57.56
67.16
68.99
70.46
74.07
77.50
79.76
80.87
82.42
93.22
14.28
14.28
19.05
14.28
19.05
14.28
19.05
19.05
19.05
19.05
20.63
20.63
22.23
22.23
22.23
22.71
22.71
22.71
27.51
27.51
30.00
30.00
33.02
37.77
37.77
43.49
43.49
52.40
57.99
68.28
19.05
19.05
19.05
22.35
22.35
23.88
23.88
23.88
26.92
26.92
26.92
33.02
41.91
41.91
41.91
3.81/8.13
3.81/8.13
3.81/8.13
4.83/9.91
4.83/9.91
5.84/11.94
5.84/11.94
5.84/11.94
9.91/14.22
9.91/14.22
9.91/14.22
12.95/18.03
17.78/24.89
17.78/24.89
17.78/24.89
1.78/6.10
1.78/6.10
1.78/6.10
2.79/7.11
2.79/7.11
4.83/8.89
4.83/8.89
4.83/8.89
6.86/11.94
6.86/11.94
6.86/11.94
8.89/16.00
12.95/20.07
12.95/20.07
12.95/20.07
18.26
20.63
20.63
23.01
23.01
24.61
24.61
27.00
29.36
31.75
34.93
39.68
44.45
49.23
55.58
25.40
27.79
27.79
30.18
30.18
32.54
32.54
34.93
38.10
41.28
44.45
50.80
57.15
63.50
69.85
11.43
15.88
11.43
15.88
11.43
15.88
15.88
15.88
15.88
15.88
15.88
15.88
15.88
15.88
7.93
11.13
11.13
13.49
13.49
15.88
19.05
19.05
23.83
23.83
31.75
34.93
41.28
28
32
36
40
All dimensions for reference only.
2
AC Threaded
line receptacle
L
A Thread
X
P
L¹
A Thread
B
AC ( )01A*
AC ( )01E*
PGA
PGR
L²
P¹
A Thread
B
AC ( )01PG( )*
X
P
B
AC ( )01AF*
AC ( )01F*
* To complete order number, see how to order, page 59.
Inches
A
B Min
Full
P1
X Max
Shell
Size
10SL
12S
12
14S
14
16S
16
18
20
22
24
Thread
Class 2 A
L
Max
L1
Max
L2
Max
P
Max
.894
.894
HexFlats
Ref
.750
.750
.750
.880
.880
.940
.940
PGA
Ref
PGR
Ref
O.D.
Cable
.312
.312
.312
.438
.438
.531
.531
.625
.750
.750
.938
.938
1.250
1.375
1.625
Thread
.406
.422
.656
.391
.625
.391
.625
.625
.625
.625
.625
.625
.625
.625
.625
.6250-24UNEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18UNEF
1.2500-18UNEF
1.3750-18UNEF
1.5000-18UNEF
1.7500-18UNS
2.0000-18UNS
2.2500-16UN
2.5000-16UN
2.129
2.129
2.524
2.201
2.524
2.201
2.524
2.596
2.654
2.654
2.885
2.885
2.943
2.943
3.068
3.010
3.010
3.500
3.188
3.641
3.265
3.718
3.718
3.798
4.080
4.142
4.291
4.643
4.643
5.635
2.189
2.261
2.644
2.261
2.644
2.266
2.644
2.716
2.774
2.916
3.051
3.140
3.184
3.245
3.670
.150/.320
.150/.320
.150/.320
.190/.390
.190/.390
.230/.470
.230/.470
.230/.470
.390/.560
.390/.560
.390/.560
.510/.710
.700/.980
.700/.980
.700/.980
.070/.240
.070/.240
.070/.240
.110/.280
.110/.280
.190/.350
.190/.350
.190/.350
.270/.470
.270/.470
.270/.470
.350/.630
.510/.790
.510/.790
.510/.790
.894
1.083
1.083
1.181
1.181
1.300
1.487
1.487
1.712
1.712
2.063
2.283
2.688
.940
1.060
1.060
1.060
1.300
1.650
1.650
1.650
28
32
36
40
Millimeters
B Min
Full
P1
Hex Flats
Ref
X Max
O.D.
Cable
7.93
7.93
Shell
L
Max
L1
L2
Max
P
Max
PGA
Ref
3.81/8.13
3.81/8.13
3.81/8.13
4.83/9.91
4.83/9.91
5.84/11.94
5.84/11.94
5.84/11.94
9.91/14.22
9.91/14.22
9.91/14.22
12.95/18.03
17.78/24.89
17.78/24.89
17.78/24.89
PGR
Ref
1.78/6.10
1.78/6.10
1.78/6.10
2.79/7.11
Size
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
Thread
10.31
10.72
16.66
9.93
Max
76.45
76.45
88.90
80.98
92.48
82.93
94.44
94.44
96.47
103.63
105.21
108.99
117.93
117.93
143.13
54.08
54.08
64.11
55.91
64.11
55.91
64.11
65.94
67.41
67.41
73.28
73.28
74.75
74.75
77.93
55.60
57.43
67.16
57.43
67.16
57.56
67.16
68.99
70.46
74.07
77.50
79.76
80.87
82.42
93.22
22.71
22.71
22.71
27.51
27.51
30.00
30.00
33.02
37.77
37.77
43.49
43.49
52.40
57.99
68.28
19.05
19.05
19.05
22.35
22.35
23.88
23.88
23.88
26.92
26.92
26.92
33.02
41.91
41.91
41.91
7.93
11.13
11.13
13.49
13.49
15.88
19.05
19.05
23.83
23.83
31.75
34.93
41.28
15.88
9.93
2.79/7.11
4.83/8.89
4.83/8.89
4.83/8.89
6.86/11.94
6.86/11.94
6.86/11.94
8.89/16.00
12.95/20.07
12.95/20.07
12.95/20.07
15.88
15.88
15.88
15.88
15.88
15.88
15.88
15.88
15.88
32
36
40
All dimensions for reference only.
3
AC Threaded
box mounting receptacle
S
R
A Thread
P
S
R
B
M
T
L
4 Holes
K
Z
AC ( )02A*
AC ( )02E*
* To complete order number, see how to order, page 59.
Inches
A
B Min
Full
K
L
M
P Dia
T Dia
+.004
–.002
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.147
.147
.173
.173
.173
Shell
Size
8S
10S
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
Thread
Class 2 A
+.020
–.010
.672
.672
.672
.672
.860
.672
.860
.672
.860
.891
.891
.891
.953
.953
1.031
1.031
1.031
+.000
–.010
.297
.297
.297
.297
.484
.297
.484
.297
.484
.453
.453
.453
.453
.453
.438
.438
.438
+.010
–.000
.562
.562
.562
.562
.750
.562
.750
.562
.750
.750
.750
.750
.812
.812
.875
.875
.875
+.010
–.000
.375
.500
.625
.625
.625
.750
.750
R
±.005
.594
.719
.719
.812
.812
.906
S
±.031
.875
Z
Thread
.391
.391
.391
.450
.625
.450
.625
.450
.625
.625
.625
.625
.625
.625
.625
.625
.625
Max**
.519
.519
.519
.519
.722
.519
.722
.519
.722
.691
.691
.691
.628
.628
.550
.550
.550
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.2500-18NEF
1.3750-18NEF
1.5000-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
1.000
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
.906
.969
.969
.875
.875
1.000
1.125
1.250
1.375
1.625
1.875
2.062
2.312
1.062
1.156
1.250
1.375
1.562
1.750
1.938
2.188
Millimeters
B Min
K
+.51
–.25
L
+.00
–.25
7.54
7.54
7.54
7.54
12.29
7.54
M
+.25
–.00
P Dia
+.25
–.00
T Dia
+.10
–.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.73
3.73
4.39
4.39
4.39
Shell
Size
8S
10S
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
Full
Thread
9.93
9.93
9.93
R
±.13
S
±.79
Z
Max**
13.18
13.18
13.18
13.18
18.34
13.18
18.34
13.18
18.34
17.55
17.55
17.55
15.95
15.95
13.97
13.97
13.97
17.07
17.07
17.07
17.07
21.84
17.07
21.84
17.07
21.84
22.63
22.63
22.63
24.21
24.21
26.19
26.19
26.19
14.28
14.28
14.28
14.28
19.05
14.28
19.05
14.28
19.05
19.05
19.05
19.05
20.63
20.63
22.23
22.23
22.23
9.53
15.09
18.26
18.26
20.63
20.63
23.01
23.01
24.61
24.61
26.98
29.36
31.75
34.93
39.68
44.45
49.23
55.58
22.23
25.40
25.40
27.79
27.79
30.18
30.18
32.54
32.54
34.93
38.10
41.28
44.45
50.80
57.15
63.50
69.85
12.70
15.88
15.88
15.88
19.05
19.05
22.23
22.23
25.40
28.58
31.75
34.93
41.28
47.63
52.38
58.73
11.43
15.88
11.43
15.88
11.43
15.88
15.88
15.88
15.88
15.88
15.88
15.88
15.88
15.88
12.29
7.54
12.29
11.51
11.51
11.51
11.51
11.51
11.13
11.13
11.13
** Increase Z dimension by .312 for size “0” contact only.
All dimensions for reference only.
4
AC Threaded
straight plug
L¹
L
A
A
Thread
Thread
PGA
PGR
P
X
P¹
Q
AC ( )06A*
AC ( )06E*
AC ( )06PG ( )*
Z
L²
D
A
E
A
Thread
Thread
P
X
V
Thread
L³
AC ( )05A*
AC ( )05E*
AC ( )06AF*
AC ( )06F*
* To complete order number, see how to order, page 59.
Inches
A
E
+.020
±.010 –.030 Max
P1 Hex
Flats
Ref
V Thread
Plated
Class 2A
X Max
O.D.
Cable
.312
.312
.312
.438
.438
.531
.531
.625
.750
.750
.938
.938
1.250
1.375
1.625
Shell
Size
Thread
Class 2B
D
L
L1
L2
L3
P
PGA
Ref
PGR
Ref
Q
Max
.946
.995
.995
Z
Max Max
Max Max
±.045
.562
.562
.812
.562
.812
.562
.812
.812
.812
.812
.812
.812
.812
.812
.812
10SL .6250-24UNEF
.438
.438
.625
.438
.625
.298 2.129 3.010 2.189
.312 2.129 3.010 2.261
.469 2.524 3.500 2.644
.312 2.201 3.188 2.261
.469 2.524 3.641 2.644
.312 2.201 3.265 2.266
.469 2.524 3.718 2.644
.469 2.596 3.718 2.716
.469 2.654 3.798 2.774
.469 2.654 4.080 2.916
.469 2.885 4.142 3.051
.469 2.885 4.291 3.140
.469 2.943 4.643 3.184
.469 2.943 4.643 3.245
.469 3.068 5.635 3.670
.989 .894 .750
.989 .894 .750
1.364 .894 .750
.989 1.083 .880
1.364 1.083 .880
.989 1.181 .940
1.364 1.181 .940
1.364 1.300 .940
1.364 1.487 1.060 .390/.560 .270/.470 1.461
1.364 1.487 1.060 .390/.560 .270/.470 1.588
1.427 1.712 1.060 .390/.560 .270/.470 1.715
1.427 1.712 1.300 .510/.710 .350/.630 1.968
1.489 2.063 1.650 .700/.980 .510/.790 2.209
1.489 2.283 1.650 .700/.980 .510/.790 2.463
1.489 2.688 1.650 .700/.980 .510/.790 2.718
.150/.320 .070/.240
.150/.320 .070/.240
.150/.320 .070/.240
.190/.390 .110/.280 1.123
.190/.390 .110/.280 1.123
.230/.470 .190/.350 1.250
.230/.470 .190/.350 1.250
.230/.470 .190/.350 1.333
.6250-24UNEF
.6250-24UNEF
.6250-24UNEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.1250-18UNEF
1.2500-18UNEF
1.3750-18UNEF
1.6250-18UNEF
1.8750-16UN
2.0625-16UN
2.3125-16UN
12S
12
14S
14
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
16S 1.0000-20UNEF .438
16
18
20
22
24
28
32
36
40
1.0000-20UNEF .625
1.1250-18UNEF .625
1.2500-18UNEF .625
1.3750-18UNEF .625
1.5000-18UNEF .688
1.7500-18UNS
2.0000-18UNS
2.2500-16UN
2.5000-16UN
.688
.750
.750
.750
Millimeters
E
+.51
–.76
7.57
7.93
11.91
7.93
11.91
7.93
11.91
11.91
11.91
11.91
11.91
11.91
11.91
11.91
11.91
P1 Hex
Flats
Ref
X Max
Shell
Size
10SL
12S
12
14S
14
16S
16
18
20
22
24
D
±.25
L
Max
L1
Max
L2
Max
L3
Max
P
Max
PGA
Ref
PGR
Ref
Q
Max
O.D.
Cable
7.93
7.93
7.93
11.13
11.13
13.49
13.49
15.88
19.05
19.05
23.83
23.83
31.75
34.93
41.28
Z
±1.14
14.28
14.28
20.63
14.28
20.63
14.28
20.63
20.63
20.63
20.63
20.63
20.63
20.63
20.63
20.63
11.13
11.13
15.88
11.13
15.88
11.13
15.88
15.88
15.88
15.88
17.48
17.48
19.05
19.05
19.05
54.08
54.08
64.11
55.91
64.11
55.91
64.11
65.94
67.41
67.41
73.28
73.28
74.75
74.75
77.93
76.45
76.45
88.90
80.98
92.48
82.93
94.44
94.44
96.47
103.63
105.21
108.99
117.93
117.93
143.13
55.60
57.43
67.16
57.43
67.16
57.56
67.16
68.99
70.46
74.07
77.50
79.76
80.87
82.42
93.22
25.12
25.12
34.65
25.12
34.65
25.12
34.65
34.65
34.65
34.65
36.25
36.25
37.82
37.82
37.82
22.71
22.71
22.71
27.51
27.51
30.00
30.00
33.02
37.77
37.77
43.49
43.49
52.40
57.99
68.28
19.05
19.05
19.05
22.35
22.35
23.88
23.88
23.88
26.92
26.92
26.92
33.02
41.91
41.91
41.91
3.81/8.13
3.81/8.13
3.81/8.13
4.83/9.91
4.83/9.91
5.84/11.94
5.84/11.94
5.84/11.94
9.91/14.22
9.91/14.22
9.91/14.22
12.95/18.03
17.78/24.89
17.78/24.89
17.78/24.89
1.78/6.10
1.78/6.10
1.78/6.10
2.79/7.11
2.79/7.11
4.83/8.89
4.83/8.89
4.83/8.89
6.86/11.94
6.86/11.94
6.86/11.94
8.89/16.00
12.95/20.07
12.95/20.07
12.95/20.07
24.03
25.27
25.27
28.52
28.52
31.75
31.75
33.86
37.11
40.34
43.56
49.99
56.11
62.56
69.04
28
32
36
40
All dimensions for reference only.
5
AC Threaded
90 degree plug
Q
L¹
Q
L
A Thread
A Thread
U
U¹
AC( )08A*
X
P
AC( )08E*
X
P
Inches
X Max
O.D. Cable
* To complete order number, see how to order, page 59.
Shell
Size
10SL
12S
12
A Thread
Class 2B
L
Max
L1
Max
P
Max
.906
.906
Q Dia
Max
.946
.995
.995
1.123
1.123
1.250
1.250
1.333
1.461
1.588
1.715
1.968
2.209
2.463
2.719
U
Max
U1
Max
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.2500-18NEF
1.3750-18NEF
1.5000-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
1.492
1.492
1.867
1.556
1.931
1.682
2.057
2.119
2.369
2.369
2.620
2.620
2.842
2.900
3.025
1.492
1.492
1.867
1.556
1.931
1.682
2.057
2.119
2.322
2.322
2.510
2.510
2.744
2.869
2.994
1.305
1.305
1.305
1.485
1.485
1.612
1.612
1.738
1.800
1.862
2.100
2.162
2.405
2.536
3.206
1.812
1.812
1.812
1.875
1.875
1.937
1.937
2.109
2.187
2.250
2.484
2.546
3.045
3.218
3.375
.312
.312
.312
.438
.438
.531
.531
.625
.750
.750
.938
.938
1.250
1.375
1.625
.906
14S
14
16S
16
18
20
22
24
28
32
1.031
1.031
1.125
1.125
1.234
1.484
1.484
1.683
1.683
2.188
2.344
2.688
36
40
Millimeters
Shell
Size
10SL
12S
12
14S
14
16S
16
18
20
22
24
L
Max
L1
Max
P
Max
Q Dia
Max
U
Max
U1
Max
X Max
O.D. Cable
7.93
37.90
37.90
47.42
39.52
49.05
42.72
52.25
53.82
60.17
60.17
66.55
66.55
72.19
73.66
76.84
37.90
37.90
47.42
39.52
49.05
42.72
52.25
53.82
58.98
58.98
63.75
63.75
69.70
72.87
76.05
23.01
23.01
23.01
26.19
26.19
28.58
28.58
31.34
37.69
37.69
42.75
42.75
55.58
59.54
68.28
24.03
25.27
25.27
28.52
28.52
31.75
31.75
33.86
37.11
40.34
43.56
49.99
56.11
62.56
69.06
33.15
33.15
33.15
37.72
37.72
40.95
40.95
44.15
45.72
47.30
53.34
54.92
61.09
64.41
81.43
46.03
46.03
46.03
47.63
47.63
49.20
49.20
53.57
55.55
57.15
63.09
64.67
77.34
81.74
85.73
7.93
7.93
11.13
11.13
13.49
13.49
15.88
19.05
19.05
23.83
23.83
31.75
34.93
41.28
28
32
36
40
All dimensions for reference only.
6
Amphenol SAE AS50151
Standard Cylindrical Connectors
DESIGN CHARACTERISTICS
• Medium to heavy weight cylindrical
•ꢀ Durable,ꢀfield-provenꢀdesign
• Environmental resistant
• Resilient inserts
• Operating voltage to 3000 VAC (RMS) at sea level
• Threaded couplings
• Single key/keyway shell polarization
CUSTOMER OPTIONS
• Five shell styles
• Nineteen shell sizes
• 305 contact arrangements from 1 to 104 circuits
• Solder or crimp contacts, sizes 16-0 accepting
22-0 AWG.
MS-A, MS-C
MS-A, MS-C
• Five class designations
• Alternate insert positioning
•ꢀ Hermeticꢀconfigurationsꢀavailable
MS connectors meet the latest performance requirements
of SAE AS50151. These connectors represent well-
proven electrical capability at an acceptable cost for most
equipment where durability is important.
SAE AS50151 features threaded couplings and single
key/keyway polarization, representing maximum simplic-
ity in design. Applications include military ground support
equipment, ordnance and shipboard installations.
Amphenol Industrial Operations manufactures five
classes of connectors to meet different requirements.
Class designations and brief descriptions are listed below.
MS-E/F
MS-E/F
A – Solid Shell – for general, non-environmental appli-
cations.
C – Pressurized – for use on pressurized bulkheads or
pressure barriers; limits air leakage regardless of
type and class of plug mated with them.
E/F –Environmental Resisting with Strain Relief –
designed for applications where the connector will
be exposed to moisture, vibration, and rapid changes
in pressure and temperature.
R – Lightweight Environmental Resisting – shorter in
length and lighter in weight than the E and F classes,
the MS-R offers a high degree of reliability under
adverse conditions: recommended for new design
applications.
MS-R
MS-R
Environmental Classes F and R are updated to and produced in strict
accordance to SAE AS50151. Classes A, C and E are still produced,
but are no longer listed on the qualified products database (QPD).
7
MS/Standard
MS-A and MS-C
MS-A and MS-C
MS-A and MS-C class connectors perform many of the
vital functions in powering, testing and ground support
systems. Class A applications include communications
equipment, computers and shipboard installations where
mechanical forces and physical parameters are not sub-
ject to extreme or rapid environmental changes.
Class C connectors are most frequently used on pressur-
ized bulkheads or pressure barriers at elevated altitudes
or maritime applications.Air leakage is limited to one cubic
inch per hour at a pressure differential of 30 lbs. per square
inch.
wall mounting receptacle
Shells:
Shell components are fabricated from high grade alumi-
num alloy. Electrically conductive cadmium plate finish
with an olive drab chromate after-treat offers corrosion
resistance.
inline receptacle
Contacts:
Contacts are solder with pre-filled solder cups. Pins and
sockets are machined from copper alloy with a silver
plated finish. Size 16 and 12 socket contacts incorporate a
closed entry design. Refer to page 54 for additional contact
information.
Inserts:
Inserts are resilient neoprene, offering high dielectric
strength, high arc resistance and resistance to vibration.
box mounting receptacle
straight plug
90 degree plug
8
MS/Standard
MS3100A or C
wall mounting receptacle
S
R
L
V
A
Thread
Thread
S
R
B
T
4 Holes
M
Z
K
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
B
Min
Full
T
Dia.
+.004
–.002
A
K
+.020
–.010
M
+.010
–.000
V
Z
Shell
Size
Thread
Class 2A
L
R
±.005
S
±.031
Thread
Class 2A
+.050
–.060
Thread
±.030
8S
10S
10SL
12S
12
.5000-28UNEF
.6250-24 UNF
.6250-24 UNF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.2500-18NEF
1.3750-18NEF
1.5000-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
2.7500-16UN
3.0000-16UN
.391
.391
.391
.450
.625
.450
.625
.450
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.672
.672
1.391
1.468
1.468
1.468
1.843
1.468
1.843
1.468
1.843
1.938
1.844
1.938
1.969
2.188
2.157
2.219
2.188
2.547
2.547
.562
.562
.562
.562
.750
.562
.750
.562
.750
.750
.750
.750
.812
.812
.875
.875
.875
.875
.875
.594
.719
.875
1.000
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
3.000††
3.000††
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.147
.147
.173
.173
.173
.173
.173
.5000-28UNEF
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.1875-18NEF
1.1875-18NEF
1.4375-18NEF
1.4375-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
3.0000-16UN
.422
.422
.672
.719
.422
.672
.812
.422
.860
.812
.672
14S
14
.672
.906
.422
.860
.906
.672
16S
16
.672
.969
.422
.860
.969
.672
18
.891
1.063
1.156
1.250
1.375
1.562
1.750
1.938
2.188
2.375
2.625
.641*
.641*
.641*
.578*
.578*
.500*
.500*
.500*
.751**
.751**
20
.891
22
.891
24
.953
28
.953
32
1.031
1.031
1.031
1.031†
1.031†
36
40
44***
48***
* Increase Z dimension by .312 for size “0” contact only.
** Increase Z dimension by .062 for size “0” contact only.
***Available in proprietary version only.
† +.020 –.030
†† ±.020
9
MS/Standard
MS3101A
inline receptacle
L
N
B
V
Thread
A
Thread
Z
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
B
Min.
Full
A
N
Dia.
Max.
V
Shell
Size
Thread
Class 2A
L
Thread
Class 2A
Z
Thread
±.030
±.040
8S
10S
10SL
12S
12
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.2500-18NEF
1.3750-18NEF
1.5000-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
.406
.406
.406
.422
.656
.391
.625
.391
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
1.390
1.468
1.468
1.468
1.843
1.468
1.843
1.468
1.843
1.938
1.844
1.938
1.969
2.188
2.157
2.219
2.188
2.521
.532
.628
.5000-28UNEF
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.1875-18NEF
1.1875-18NEF
1.4375-18NEF
1.4375-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
1.094
1.094
1.094
1.094
1.532
1.094
1.532
1.094
1.532
1.532*
1.532*
1.532*
1.532*
1.532*
1.532*
1.532*
1.532*
1.782**
.755
.755
.755
14S
14
.882
.882
16S
16
1.010
1.010
1.137
1.264
1.392
1.519
1.774
1.996
2.251
2.506
3.135
18
20
22
24
28
32
36
40
44*** 2.7500-16UN
*
Increase Z dimension by .312 for size “0” contact only.
** Increase Z dimension by .062 for size “0” contact only.
***Available in proprietary version only.
10
MS/Standard
MS3102A or C
box mounting receptacle
S
R
B
A
Thread
N
S
R
T
4 Holes
L
M
Z
K
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
B
Min
Full
N
Dia.
+.010
–.000
T
Dia.
+.004
–.002
A
K
+.020
–.010
L
M
+.010
–.000
Z
Shell
Size
Thread
Class 2A
+.000
–.010
R
±.005
S
±.031
+.050
–.060
Thread
8S
10S
10SL
12S
12
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.2500-18NEF
1.3750-18NEF
1.5000-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
2.7500-16UN
3.0000-16UN
.391
.391
.391
.450
.625
.450
.625
.450
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.672
.672
.672
.672
.860
.672
.860
.672
.860
.891
.891
.891
.953
.953
1.031
1.031
1.031
1.063
1.063
.297
.297
.297
.297
.484
.297
.484
.297
.484
.453
.453
.453
.453
.453
.438
.438
.438
.543†
.543†
.562
.562
.562
.562
.750
.562
.750
.562
.750
.750
.750
.750
.812
.812
.875
.875
.875
.875
.875
.375
.500
.594
.719
.875
1.000
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
3.000††
3.250††
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.147
.147
.173
.173
.173
.173
.209
.422
.422
.625
.719
.422
.625
.812
.422
.625
.812
.672
14S
14
.750
.906
.422
.750
.906
.672
16S
16
.875
.969
.422
.875
.969
.672
18
1.000
1.125
1.250
1.375
1.625
1.875
2.062
2.312
2.594
2.812
1.062
1.156
1.250
1.375
1.562
1.750
1.938
2.188
2.375
2.625
.641*
.641*
.641*
.578
20
22
24
28
.578*
.500*
.500*
.500*
.768**
.769**
32
36
40
44***
48***
* Increase Z dimension by .312 for size “0” contact only.
** Increase Z dimension by .062 for size “0” contact only.
***Available in proprietary version only.
† +.020 –.030
†† ±.020
11
MS/Standard
MS3106A
straight plug
L
J
Z
Q
V
A
Thread
Thread
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
A
Q
Dia.
Max.
V
Shell
Size
Thread
Class 2B
J
L
Thread
Class 2A
Z
±.005
±.030
±.045
8S
10S
10SL
12S
12
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.2500-18NEF
1.3750-18NEF
1.5000-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
2.7500-16UN
3.3000-16UN
.531
.531
.531
.531
.719
.531
.719
.531
.719
.719
.719
.719
.719
.719
.719
.719
.719
.719
.719
.859
.937
.741
.869
.5000-28UNEF
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.1875-18NEF
1.1875-18NEF
1.4375-18NEF
1.4375-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
3.0000-16UN
.562
.562
.937
.946
.562
.937
.995
.562
1.124
.937
.995
.812
14S
14
1.123
1.123
1.250
1.250
1.333
1.461
1.588
1.715
1.968
2.209
2.463
2.719
3.084
3.354
.562
1.124
.937
.812
16S
16
.562
1.124
1.219
1.125
1.219
1.251
1.470
1.439
1.500
1.469
1.818†
1.818†
.812
18
.812*
.812*
.812*
.812*
.812*
.812*
.812*
.812*
1.063**
1.063**
20
22
24
28
32
36
40
44***
48***
*
Increase Z dimension by .312 for size “0” contact only.
** Increase Z dimension by .062 for size “0” contact only.
***Available in proprietary version only.
†
+.020 –.030
12
MS/Standard
MS3108A
90 degree plug
L
Z
J
Q
A
Thread
U
W
V
Thread
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
A
Q
Dia.
Max.
V
Shell
Size
Thread
Class 2B
J
L
Max.
U
Max.
Thread
Class 2A
Z
±.005
W
±.045
8S
10S
10SL
12S
12
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.2500-18NEF
1.3750-18NEF
1.5000-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
.531
.531
.531
.531
.719
.531
.719
.531
.719
.719
.719
.719
.719
.719
.719
.719
.719
.896
.927
.741
.869
.750
.750
.5000-28UNEF
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.1875-18NEF
1.1875-18NEF
1.4375-18NEF
1.4375-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.438
.500
.500
.562
.562
.562
.562
.812
.562
.812
.562
.812
.812*
.812*
.812*
.812*
.812*
.812*
.812*
.812*
.951
.946
.875
.956
.995
.875
1.143
1.120
1.207
1.146
1.332
1.395
1.645
1.645
1.896
1.896
2.118
2.176
2.301
.995
.875
14S
14
1.123
1.123
1.250
1.250
1.333
1.461
1.588
1.715
1.968
2.209
2.463
2.719
1.000
1.000
1.062
1.062
1.188
1.250
1.312
1.438
1.500
1.750
1.875
2.031
16S
16
18
20
22
24
28
32
36
40
* Increase Z dimension by .312 for size “0” contact only.
13
MS/Standard
MS-E/F
MS-E & F
MS Class F connectors satisfy all the performance
requirements of SAE AS50151. Class E, environmental is
also produced, but is no longer listed on the qualified
products listing (QPL). These connectors are recom-
mended for conditions where vibration, moisture, pres-
sure and/or temperature are extreme. Strain relief is
supplied on most shell sizes.
Shells:
wall mounting receptacle
Shell components are fabricated from high grade alumi-
num alloy. The standard hardware plating is electrically
conductive cadmium plated finish with an olive drab chro-
mate after-treatment for corrosion resistance.
Contacts:
Contacts are silver plated copper alloy for maximum cor-
rosion resistance, maximum current carrying capacity and
low millivolt drop. Size 16 and 12 socket contacts
incorporate a closed entry design. Refer to page 54 for
additional contact information.
inline receptacle
Inserts:
Resilient neoprene inserts provide an outstanding mois-
ture barrier, high dielectric strength, and resistance to
vibration. Either pin or socket insert can be pressurized.
Strain Relief Clamp:
Strain relief clamps minimize tension at the solder well
connection and provide a positive mechanical moisture
seal. Complete field serviceability is possible with the
strain relief clamp.
box mounting receptacle
straight plug
90 degree plug
14
MS/Standard
MS3100E/F
wall mounting receptacle
S
L
R
A Thread
XX
P
S
R
B
T
4 Holes
M
K
Z
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
B
Min.
Full
T
Dia.
+.004
–.002
XX
Min.
Cable
A
K
+.020
–.010
M
+.010
–.000
Shell
Size
Thread
Class 2A
L
Max.
P
Max.
R
±.005
S
±.010
Z*
Max.
Thread
Clearance
10SL
12S
12
.6250-24UNEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18UNEF
1.2500-18UNEF
1.3750-18UNEF
1.5000-18UNEF
1.7500-18UNS
2.0000-18UNS
2.2500-16UN
.391
.450
.625
.450
.625
.450
.625
.625
.625
.625
.625
.625
.625
.625
.625
.672
.672
.860
.672
.860
.672
.860
.891
.891
.891
.953
.953
1.031
1.031
1.031
2.129
2.129
2.129
2.201
2.524
2.201
2.524
2.596
2.654
2.654
2.885
2.885
2.943
2.943
3.068
.562
.562
.750
.562
.750
.562
.750
.750
.750
.750
.812
.812
.875
.875
.875
.896
.896
.896
.719
.812
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.147
.147
.173
.173
.173
.472
.472
.722
.472
.722
.472
.722
.691
.691
.691
.628
.628
.550
.550
.550
.281
.281
.281
.406
.406
.500
.500
.531
.656
.740
.781
.922
1.156
1.250
1.562
.812
14S
14
1.021
1.021
1.151
1.151
1.242
1.499
1.499
1.781
1.781
2.087
2.281
2.581
.906
.906
16S
16
.969
.969
18
1.063
1.156
1.250
1.375
1.562
1.750
1.938
2.188
20
22
24
28
32
36
40
2.5000-16UN
*
Increase Z dimension by .312 for size “0” contact only.
15
MS/Standard
MS3101E/F
inline receptacle
L
A Thread
XX
J
B
Z
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
B
Min.
Full
XX
Min.
Cable
A
Shell
Size
Thread
Class 2A
J
Max.
L
Max.
Z*
Max.
Thread
Clearance
10SL
12S
12
.6250-24UNEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18UNEF
1.2500-18UNEF
1.3750-18UNEF
1.5000-18UNEF
1.7500-18UNS
2.0000-18UNS
2.2500-16UN
.406
.422
.656
.391
.625
.391
.625
.625
.625
.625
.625
.625
.625
.625
.625
.896
.896
2.129
2.129
2.129
2.201
2.524
2.201
2.524
2.596
2.654
2.654
2.885
2.885
2.943
2.943
3.068
1.134
1.134
1.572
1.134
1.572
1.134
1.572
1.572
1.572
1.572
1.572
1.572
1.572
1.572
1.572
.281
.281
.281
.406
.406
.500
.500
.531
.656
.740
.781
.922
1.156
1.250
1.562
.896
14S
14
1.021
1.021
1.151
1.151
1.242
1.499
1.499
1.781
1.781
2.087
2.281
2.581
16S
16
18
20
22
24
28
32
36
40
2.5000-16UN
*
Increase Z dimension by .312 for size “0” contact only.
16
MS/Standard
MS3102E
box mounting receptacle
S
R
B
A
Thread
N
S
R
T
4 Holes
L
M
Z
K
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
B
Min.
Full
N
Dia.
+.010
–.000
T
Dia.
+.004
–.002
A
K
+.020
–.010
L
M
+.010
–.000
Z
Shell
Size
Thread
Class 2A
+.000
–.010
R
±.005
S
±.031
+.050
–.060
Thread
8S
10S
10SL
12S
12
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.2500-18NEF
1.3750-18NEF
1.5000-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
.391
.391
.391
.450
.625
.450
.625
.450
.625
.625
.625
.625
.625
.625
.625
.625
.625
.672
.672
.672
.672
.860
.672
.860
.672
.860
.891
.891
.891
.953
.953
1.031
1.031
1.031
.297
.297
.297
.297
.484
.297
.484
.297
.484
.453
.453
.453
.453
.453
.438
.438
.438
.562
.562
.562
.562
.750
.562
.750
.562
.750
.750
.750
.750
.812
.812
.875
.875
.875
.375
.500
.594
.719
.875
1.000
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.147
.147
.173
.173
.173
.422
.422
.422
.422
.672
.422
.672
.422
.672
.641*
.641*
.641*
.578*
.578*
.500*
.500*
.500*
.625
.719
.625
.812
.625
.812
14S
14
.750
.906
.750
.906
16S
16
.875
.969
.875
.969
18
1.000
1.125
1.250
1.375
1.625
1.875
2.062
2.312
1.062
1.156
1.250
1.375
1.562
1.750
1.938
2.188
20
22
24
28
32
36
40
* Increase Z dimension by .312 for size “0” contact only.
17
MS/Standard
MS3106E/F
straight plug
L
Q
Z
B
A
Thread
J
XX
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
XX
Min.
Cable
A
Shell
Size
Thread
Class 2A
B
±.005
J
Max.
L
Max.
Q
Max.
Z*
±.045
Clearance
10SL
12S
12
.6250-24UNEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18UNEF
1.2500-18UNEF
1.3750-18UNEF
1.5000-18UNEF
1.7500-18UNS
2.0000-18UNS
2.2500-16UN
.531
.531
.719
.531
.719
.531
.719
.719
.719
.719
.719
.719
.719
.719
.719
.896
.896
2.129
2.129
2.129
2.201
2.524
2.201
2.524
2.596
2.654
2.654
2.885
2.885
2.943
2.943
3.068
.946
.995
.607
.607
.857
.607
.857
.607
.857
.857
.857
.857
.857
.857
.857
.857
.857
.281
.281
.281
.406
.406
.500
.500
.531
.656
.740
.781
.922
1.156
1.250
1.562
.896
.995
14S
14
1.021
1.021
1.151
1.151
1.242
1.499
1.499
1.781
1.781
2.087
2.281
2.581
1.123
1.123
1.250
1.250
1.333
1.461
1.588
1.715
1.968
2.209
2.463
2.718
16S
16
18
20
22
24
28
32
36
40
2.5000-16UN
*
Increase Z dimension by .312 for size “0” contact only.
18
MS/Standard
MS3108E
90 degree plug
L
J
Q
Z
U
A
Thread
Y
N
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
A
Q
Dia.
Max.
Y
Shell
Size
Thread
Class 2B
J
L
Max.
N
Max.
U
Max.
Thread
Class 2B
Z
±.005
±.045
8S
10S
10SL
12S
12
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.1000-20UNEF
1.1250-18NEF
1.2500-18NEF
1.3750-18NEF
1.5000-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
.531
.531
.531
.531
.719
.531
.719
.531
.719
.719
.719
.719
.719
.719
.719
.719
.719
.927
.927
.807
.807
.741
.869
1.445
1.445
1.508
1.508
1.508
1.570
1.570
1.633
1.633
1.759
1.931
1.993
2.119
2.181
2.570
2.695
2.851
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
8-32NC
8-32NC
8-32NC
8-32NC
10-32NF
10-32NF
10-32NF
.562
.562
.562
.562
.812
.562
.812
.562
.812
.812*
.812*
.812*
.812*
.812*
.812*
.812*
.812*
.951
.901
.946
.956
.901
.995
1.143
1.020
1.207
1.146
1.333
1.395
1.598
1.598
1.786
1.786
2.020
2.145
2.270
.901
.995
14S
14
1.026
1.026
1.119
1.119
1.229
1.479
1.479
1.666
1.666
2.135
2.260
2.510
1.123
1.123
1.250
1.250
1.333
1.461
1.588
1.729
1.968
2.209
2.463
2.719
16S
16
18
20
22
24
28
32
36
40
* Increase Z dimension by .312 for size “0” contact only.
19
MS/Standard
MS-R
MS-R
Specification requirements for greater reliability in a
shorter, lighter weight environmental resistant connector
led to the design of the MS-R. MS Class R connectors
satisfy all the performance requirements of SAEAS50151.
This low profile assembly was attained by moving the axial
compression nut and grommet assembly forward and
flush with the rear of the insert. The neoprene grommet,
with its low coefficient of friction, assures easier threading
of wire bundles and quicker assembly and serviceability of
the unit. Molded webs in each wire hole insure a moisture
barrier around each wire.
wall mounting receptacle
The addition of an “O” ring at the main joint of all MS3106R
plugs provide a main joint seal supplementary to the
interfacial seal, thus insuring a higher degree of reliability
when connector halves from different sources are
employed.
Shells:
Shell components are fabricated from high grade alumi-
num alloy. All components have the standard electrically
conductive cadmium plated finish with an olive drab chro-
mate after-treatment for corrosion resistance.
inline receptacle
Contacts:
Contacts are machined from copper alloy for maximum
corrosion resistance, maximum current carrying capacity
and low millivolt drop. Refer to page 54 for additional
contact information.
Inserts:
Resilient neoprene inserts provide an outstanding mois-
ture barrier, maximum vibration resistance and high
dielectric strength. Either pin or socket insert can be
pressurized.
box mounting receptacle
straight plug
20
MS/Standard
MS3100R
wall mounting receptacle
L
S
R
K
P
M
Z
B
R
S
H
A
Thread
T
Y
4 Holes
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
B
Min.
Full
T
Dia.
+.004
–.002
A
H
Dia.
Max.
K
+.020
–.010
M
+.010
–.000
P
Dia.
Max.
Y
Z
Shell
Size
Thread
Class 2A
L
Max.
R
±.005
S
±.031
Thread
Class 2
+.050
–.060
Thread
8S
10S
10SL
12S
12
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.2500-18NEF
1.3750-18NEF
1.5000-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
.391
.391
.391
.450
.625
.450
.625
.450
.625
.625
.625
.625
.625
.625
.625
.625
.625
.959
1.026
1.120
1.120
1.120
1.307
1.307
1.432
1.432
1.557
1.744
1.869
1.994
2.166
.672
.672
.672
.672
.860
.672
.860
.672
.860
.891
.891
.891
.953
.953
1.588
1.588
1.588
1.588
1.931
1.588
1.931
1.588
1.931
1.931
1.931
1.931
2.009
2.009
2.072
2.072
2.072
.562
.562
.562
.562
.750
.562
.750
.562
.750
.750
.750
.750
.812
.812
.875
.875
.875
.557
.682
.807
.807
.807
.932
.932
1.057
1.057
.594
.719
.719
.812
.812
.906
.906
.969
.969
.875
1.000
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
6-32NC .120
6-32NC .120
6-32NC .120
6-32NC .120
6-32NC .120
6-32NC .120
6-32NC .120
6-32NC .120
6-32NC .120
6-32NC .120
8-32NC .120
8-32NC .120
8-32NC .147
8-32NC .147
.422
.422
.422
.422
.672
.422
.672
.422
.672
.641*
.641*
.641*
.578*
.578*
.500*
.500*
.500*
14S
14
16S
16
18
1.182 1.063
1.291 1.156
1.432 1.250
1.557 1.375
1.807 1.562
2.057 1.750
2.260 1.938
2.260 2.510
20
22
24
28
32
2.541 1.031
2.729 1.031
2.979 1.031
2.250 10-32NF .173
2.500 10-32NF .173
2.750 10-32NF .173
36
40
* Increase Z dimension by .312 for size “0” contact only.
21
MS/Standard
MS3101R
inline receptacle
L
Z
J
B
F
A
Thread
Y
Thread
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
B
Min.
Full
A
F
Dia.
Max.
J
Dia.
Max.
Y
Shell
Size
Thread
Class 2A
L
Max.
Thread
Class 2
Z
Thread
±.040
8S
10S
10SL
12S
12
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.2500-18NEF
1.3750-18NEF
1.5000-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
.406
.406
.406
.422
.656
.391
.625
.391
.625
.625
.625
.625
.625
.625
.625
.625
.625
.959
1.026
1.120
1.120
1.120
1.307
1.307
1.432
1.432
1.557
1.744
1.869
1.994
2.166
2.541
2.729
2.979
.557
.682
1.588
1.588
1.588
1.588
1.931
1.588
1.931
1.588
1.931
1.931
1.931
1.931
2.009
2.009
2.072
2.072
2.072
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
8-32NC
8-32NC
8-32NC
8-32NC
10-32NF
10-32NF
10-32NF
1.094
1.094
1.094
1.094
1.532
1.094
1.532
1.094
1.532
1.532*
1.532*
1.532*
1.532*
1.532*
1.532*
1.532*
1.532*
.807
.807
.807
14S
14
.932
.932
16S
16
1.057
1.057
1.182
1.291
1.432
1.557
1.807
2.057
2.260
2.510
18
20
22
24
28
32
36
40
*
Increase Z dimension by .312 for size “0” contact only.
22
MS/Standard
MS3102R
box mounting receptacle
S
R
B
A
Thread
N
S
R
T
4 Holes
L
M
Z
K
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
B
Min.
Full
N
Dia.
+.010
–.000
T
Dia.
+.004
–.002
A
K
+.020
–.010
L
M
+.010
–.000
Z
Shell
Size
Thread
Class 2A
+.000
–.010
R
±.005
S
±.031
+.050
–.060
Thread
8S
10S
10SL
12S
12
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.2500-18NEF
1.3750-18NEF
1.5000-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
.391
.391
.391
.450
.625
.450
.625
.450
.625
.625
.625
.625
.625
.625
.625
.625
.625
.672
.672
.672
.672
.860
.672
.860
.672
.860
.891
.891
.891
.953
.953
1.031
1.031
1.031
.297
.297
.297
.297
.484
.297
.484
.297
.484
.453
.453
.453
.453
.453
.438
.438
.438
.562
.562
.562
.562
.750
.562
.750
.562
.750
.750
.750
.750
.812
.812
.875
.875
.875
.375
.500
.594
.719
.875
1.000
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.147
.147
.173
.173
.173
.422
.422
.422
.422
.672
.422
.672
.422
.672
.641*
.641*
.641*
.578*
.578*
.500*
.500*
.500*
.625
.719
.625
.812
.625
.812
14S
14
.750
.906
.750
.906
16S
16
.875
.969
.875
.969
18
1.000
1.125
1.250
1.375
1.625
1.875
2.062
2.312
1.062
1.156
1.250
1.375
1.562
1.750
1.938
2.188
20
22
24
28
32
36
40
* Increase Z dimension by .312 for size “0” contact only.
23
MS/Standard
MS3106R
straight plug
L
N
Z
J
Q
A
Thread
F
Y
To complete order number, see “how to order” pg. 59.
For solder well data, see page 29.
All lockwire holes are .045 dia. min.
A
F
Dia.
Max.
N
Dia.
Max.
Q
Dia.
Max.
Y
Shell
Size
Thread
Class 2B
J
L
Max.
Thread
Class 2
Z
±.005
±.045
8S
10S
10SL
12S
12
.5000-28UNEF
.6250-24NEF
.6250-24NEF
.7500-20UNEF
.7500-20UNEF
.8750-20UNEF
.8750-20UNEF
1.0000-20UNEF
1.0000-20UNEF
1.1250-18NEF
1.2500-18NEF
1.3750-18NEF
1.5000-18NEF
1.7500-18NS
2.0000-18NS
2.2500-16UN
2.5000-16UN
.959
1.026
1.120
1.120
1.120
1.307
1.307
1.432
1.432
1.557
1.744
1.869
1.994
2.166
2.541
2.729
2.979
.531
.531
.531
.531
.719
.531
.719
.531
.719
.719
.719
.719
.719
.719
.719
.719
.719
1.057
1.057
1.057
1.057
1.212
1.057
1.212
1.057
1.212
1.212
1.212
1.212
1.291
1.291
1.353
1.353
1.353
.557
.682
.807
.807
.807
.932
.932
.741
.869
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
6-32NC
8-32NC
8-32NC
8-32NC
8-32NC
10-32NF
10-32NF
10-32NF
.562
.562
.562
.562
.812
.562
.812
.562
.812
.812*
.812*
.812*
.812*
.812*
.812*
.812*
.812*
.946
.995
.995
14S
14
1.123
1.123
1.250
1.250
1.333
1.461
1.588
1.715
1.968
2.209
2.463
2.719
16S
16
1.057
1.057
1.182
1.291
1.432
1.557
1.807
2.057
2.260
2.510
18
20
22
24
28
32
36
40
*
Increase Z dimension by .312 for size “0” contact only.
24
AC Series/MS
insert availability
Insert
Arrangement
Service
Rating
Total
Contacts
Contact Size
Insert
Arrangement
Service
Rating
Total
Contacts
Contact Size
0
4
8
12
16
0
4
8
12
16
10SL-3
10SL-4†
A
A
3
2
3
2
18-30
18-31
A
A
5
5
5
5
12S-3
12S-4
12-5
A
D
2
1
1
3
4
1
5
6
3
2
4
3
7
1
7
1
2
3
3
5
1
3
4
3
2
1
2
4
10
2
4
3
1
1
8
7
4
5
6
4
2
4
1
7
10
5
3
10
5
2
1
20-2
D
D
1
3
1
20-3
3
4
D
1
20-4
D
4
14S-1
14S-2
14S-4
14S-5
14S-6
14S-7
14S-9
14S-10
14S-12
14S-A7
14-3
A
3
4
1
5
6
3
2
4
3
7
20-6
D
3
3
8
Inst.
D
20-7
D/A
Inst.
D/A
Inst.
A
8
20-8
6
2
4
Inst.
Inst.
A
20-9
8
1
7
20-11
20-12
20-14
20-15
20-16
20-17
20-18
20-19
20-20
20-21
20-22
20-23
20-24
20-25
20-27
20-29
20-30
20-33
20-51
20-57
20-58
20-59
20-66
20-79
22-1
13
2
13
1
1
1
A
A
5
2
3
7
2
5
3
Inst.
A
A
7
A
9
7
1
6
A
A
6
A
1
A
9
16S-1
16S-3
16S-4
16S-5
16S-6
16S-8
16-2
A
7
1
2
3
3
5
A
3
3
B
A
4
3
1
D
A
9
8
3
A
A
6
3
2
2
A
A
2
A
A
4
2
E
1
Inst.
A
13
14
17
13
11
3
13
14
17
13
11
16-7
A
1
2
2
16-9
A
2
3
2
A
16-10
16-11
16-12
16-13
16-59
18-1
A
Inst.
A
A
A
1
1
A
3
A
2
4
A
7
7*
5
A
A
10
3
5
A/Inst.
D
10
A
3*
18-3
2
2
A
6
5*
1
18-4
D
4
1
D/A
D
8
1
7
18-5
D
2
2
3
2
18-6
D
22-2
D
3
18-7
B
1
1
22-4
A
4
2
2
18-8
A
1
2
4
5
7
22-5
D
6
4
1
18-9
Inst.
A
5
22-6
D
3
2
18-10
18-11
18-12
18-13
18-14
18-15
18-16
18-17
18-19
18-20
18-22
18-24
18-29
22-7
E
1
1
A
22-8
E
2
2
3
A
6
1
22-9
E
3
A
3
22-10
22-11
22-12
22-13
22-14
22-15
22-16
22-17
22-18
E
4
4
2
A
1
B
2
A
4
1
2
D
5
2
3
C
D/A
A
5
4
1
Inst.
A
5
10
5
19
6
19
1
E/A
A
5
3
1
A
9
6
D
3
D/A
D/A
9
8
A/Inst.
A
10
5
8
8
* Crimp contacts accommodate wire the same size as the contact as well as
wire of the next smaller, even size. Arrangements identified with an asterisk
(*) are exceptions. See insert arrangement drawings on pages 32-53 for
application wire size.
25
AC Series/MS
insert availability, cont.
Contact Size
Contact Size
Insert
Total
Insert
Total
Arrange Service Con-
ment
Coax**
Arrange Service Con-
ment
Coax**
Rating
tacts 4/0 2/0
0
4
8
12 16
0
4
8
12
Rating
tacts 4/0 2/0
0
4
8
12 16
0
4
8 12
22-19
22-20
A
A
14
9
14
9
28-3
E
3
3
28-4
E/D
9
2
7
22-21
22-22
22-23
22-24
22-27
22-28
22-33
22-34
22-36
22-63
22-65
22-70
22-80
24-2
A
A
3
4
1
2
28-5
D
D
5
2
3
2
1
2
4
28-6
3
D/A
D/A
D/A
A
8
8
28-7
D
2
6
2
4
8
28-8
E/D/A
D
12
12
7
2
6
3
4
10
9
1
28-9
6
7
7
28-10
28-11
28-12
28-13
28-15
28-16
28-17
D/A
A
2
2
D/A
D
7
7
22
26
26
35
20
15
18
26
26
35
20
15
12
6
5
3
8
2
A
D/A
A
8
A
12
8
4
8
5
A
D/A
A
8*
8
A
13
3
B/D/A
A
3*
28-18 C/D/A/Inst. 12
D
7
7
2
28-19
28-20
28-21
28-22
28-51
28-59
28-66
28-72
28-74
28-75
28-79
28-82
28-84
28-AY
32-1
B/D/A
10
14
37
6
4
24-3
D
7
5
A
10
4
24-5
A
16
8
16
A
37
3
24-6
D/A
A
8
D
3
24-7
16
2
2
14
A
12
17
16
3
12
7
24-9
A
2
2
A
10
24-10
24-11
24-12
24-16
24-17
24-19
24-20
24-21
24-22
24-27
24-28
24-51
24-52
24-53
24-58
24-59
24-60
24-65
24-66
24-67
24-71
24-75
24-79
24-80
24-84
24-96
24-AJ
28-1
A
7
7
3
A
2
14
A
9
6
3
3
2
Coax
3
A
5
A
16
16
16
6
7*
7*
7
9
9
9
D/A
D
7
1
3
3
A
5
A
A
12
11
10
4
12
9
D
2
4
D
2
A
9
9
D
1
4
9
A
9
4
5
D
E/D
5
2
1
2
3
E
7
7
32-2
E
5
3
2
2
4
Inst.
A
24
5
24
32-3
D
9
2
5
32-4
A/D
14
2
2
12
Hi-Volt
A
1
1
32-5
D
5
5
3
32-6
A
23
35
30
14
7
2
3
2
7
6
16
28
24
12
3
A
13
14
7
3
7
7
7
32-7
Inst./A
A
32-8
A
A
7*
32-9
D
2
A
15
7
11
7
4
32-10
32-12
32-13
32-14
32-15
32-16
32-17
32-22
32-25
32-31
32-48
32-52
32-53
E/B/D/A
2
2
D
A/D
15
23
13
8
5
5
10
18
Inst.
A
19
7
19
D
D
7*
7*
5
13
6
A
7
D
2
2
A
5
A
23
4
2
4
3
2
16
54
Inst.
A
23
19
28
25
9
23
D
1
18
A
54
25
31
48
8
Inst.
A
28
A
25
25
A
31
D/A
D
3
6
Inst.
D
48
28-2
14
2
12
6
Inst./E
42
5
37
* Crimp contacts accommodate wire the same size as the contact as well as
wire of the next smaller, even size. Arrangements identified with an asterisk
(*) are exceptions. See insert arrangement drawings on pages 32-53 for
application wire size.
26
AC Series/MS
insert availability, cont.
Contact Size
Contact Size
Insert
Total
Insert
Total
Arrange Service Con-
ment
Coax**
Arrange Service Con-
ment
Coax**
Rating
tacts 4/0 2/0
0
4
8
12 16
0
4
8 12
Rating
tacts 4/0 2/0
0
4
8
12 16
0
4
8 12
32-56
32-57
A
Coax
30
8
6* 24
6
36-83
36-85
Coax
A/D
7
35
7
2
35*
32-58
32-59
32-60
32-62
32-64
32-68
32-73
32-75
32-76
32-79
32-82
32-AF
36-1
Coax
A
4
4
36-97
36-99
36-AF
40-1
C
D
1
1
42
23
23
54
16
46
9
40
15
2
8
2
12
48
30
5
3
3
3
6
3
A
A
48
24
Coax
Inst.
A
2
1
2
16
54
12
46
D
40-5
A
5
4
40-9
A
47
29
30
35
60
85
4
1
9
22 24
16
A
40-10
40-30
40-35
40-53
40-56
40-57
40-61
40-62
40-63
40-64
40-66
40-67
40-68
40-70
40-72
40-73
40-74
40-75
40-80
40-81
40-82
40-85
40-86
40-87
40-AD
40-AG
40-AP
40-AR
40-AS
40-AT
40-AU
40-AV
A
4
1
Coax
A
2
7
A
29
19
5
19
D
35
D
4
4
1
A
60
A
16
55
22
6
12
55
18
A
85
A
E
4
D
4
3
A
59
60
61
36
4
1
3
55
60
36-3
D
3
3
4
2
A
36-4
D/A
A
3
A
61*
20
36-5
4
Coax
Coax
A
3
13
36-6
A
6
4
1
4
4
4
36-7
A
47
47
31
48
48
48
17
16
35
47
47
31
34
4
7
1
40
46
11
21
61
11
61
6
1
10
36-8
A
A
21
36-9
A
2
5
14 14
48
A
61
1
36-10
36-11
36-12
36-13
36-14
36-15
36-16
36-17
36-18
36-20
36-51
36-52
36-54
36-55
36-59
36-60
36-64
36-65
36-71
36-73
36-74
36-75
36-76
36-77
36-78
36-79
36-80
A
A
10
1
A
48
A
61
A
48
A
1
1
E/A
D
2
15
6
E
5
4
5
A
11
62
62
60
4
10
7
1
D/A
A
35
40
40
A
62*
62
60
7
7
A
A
A
A
1
2
2
2
14 14
E
A
2
30
D
7
D
2
A
8
4
4
A
52
39
39
53
47
4
52
31
31
A
38
2
38
7
A
8
E
2
A
8*
Inst.
A
13
40
43
14
3
3
3
3
A
3* 50
7* 40
25 15
24 18
1
A
A
1
Coax
Coax
A
4
4
A
10
4
D
3
53
7
3
50
Coax
A
7
44
48
47
7
43
48*
47
1
A
A
D
7
A
14
20
20
12
2
A
20
A
20*
* Crimp contacts accommodate wire the same size as the contact as well as
wire of the next smaller, even size. Arrangements identified with an asterisk (*)
are exceptions. See insert arrangement drawings on pages 32-53 for
application wire size.
27
AC Series/MS
insert alternate positioning
To avoid cross-plugging problems in applications requiring
the use of more than one connector of the same size and
arrangement, alternate rotations are available as indicated in
the accompanying charts.
The following insert arrangements have the same alternate
insert rotations for W, X, Y and Z, which are:
Degrees
W
80
X
110
Y
250
Z
280
As shown in the diagram below, the front face of the pin insert
is rotated within the shell in a clockwise direction from the
normal shell key. The socket insert would be rotated counter-
clockwise the same number of degrees in respect to the
normal shell key.
t
16-7
18-5
18-9
18-13
18-14
20-7
20-8
20-9
20-20
20-22
22-3
22-21
22-24
22-25
22-29
22-33
22-34
24-1
24-3
24-4
24-5
24-6
24-7
28-8
32-1
36-1
24-12
24-14
24-16
24-17
24-20
24-21
24-28
24-AJ
28-1
28-9
32-3
32-4
32-6
32-9
32-10
32-12
32-13
32-22
32-31
32-AF
36-7
36-8
28-10
28-11
28-14
28-15
28-16
28-17
28-19
28-20
28-21
22-6
36-13
40-AR
40-AS
40-AT
40-AU
22-12
22-14
22-15
22-16
22-17
22-18
22-19
Position W
Position X
Position Y
Position Z
20-12
20-14
20-16
View looking into front face of pin insert or rear of socket insert.
28-4
Insert
Degrees
Insert
Degrees
Insert
Degrees
Arrangement
W
X
Y
Z
Arrangement
W
X
Y
Z
Arrangement
W
X
Y
Z
10-SL-4
12S-3
63
70
–
–
145
–
215
240
–
–
290
–
–
–
290
325
–
325
325
280
325
290
–
20-19
20-21
90
35
180
110
110
110
110
–
110
145
110
110
110
145
110
110
110
110
110
–
270
250
250
250
250
–
250
215
250
250
250
215
250
250
250
250
250
250
250
–
–
325
28-18
28-22
28-AY
32-2
32-5
32-7
70
70
145
215
215
290
290
–
145
110
145
110
125
125
130
110
110
120
–
14S-2
14S-5
14S-7
14S-9
16-9
16-10
16-11
16-13
16S-1
16S-4
16S-5
16S-6
16S-8
18-1
120
110
180
145
110
180
110
110
–
110
145
180
170
145
110
110
–
20-23
20-24
20-27
20-29
22-1
22-2
22-4
22-5
22-8
35
35
35
80
35
70
35
35
35
70
35
35
35
35
–
35
80
80
20
80
35
80
35
45
80
35
70
35
70
35
90
325
325
325
280
325
290
325
325
325
290
325
325
325
325
–
45
70
35
80
80
65
35
45
60
80
80
30
30
70
70
–
35
80
80
90
60
65
65
33
65
65
70
45
37
35
90
250
215
250
235
235
230
250
250
–
–
290
325
280
280
295
280
–
–
–
250
–
–
290
290
–
325
280
280
–
90
70
35
90
35
35
80
35
70
90
–
70
35
35
70
–
270
215
250
270
250
250
–
250
215
270
265
215
250
250
–
32-8
32-14
32-15
32-17
32-25
32-48
32-64
32-68
32-82
36-3
36-4
36-5
36-6
36-9
22-9
–
110
–
22-10
22-11
22-13
22-20
22-22
22-23
22-27
22-28
22-63
24-2
100
–
–
–
–
290
325
325
290
–
–
280
–
–
290
–
290
–
325
290
280
–
145
145
120
110
125
125
180
125
–
130
–
125
125
130
–
215
215
240
250
235
235
270
245
–
235
–
225
225
230
–
18-3
18-4
18-8
–
–
–
–
–
280
280
–
280
325
280
325
–
280
325
290
325
290
325
–
18-10
18-11
18-12
18-15
18-20
18-22
18-29
20-3
20-4
20-5
20-6
20-15
20-17
20-18
120
170
–
240
265
–
–
80
–
–
–
36-10
36-14
36-15
36-AF
40-1
120
180
145
180
145
110
110
145
–
240
270
215
270
215
250
250
215
–
24-9
110
–
110
110
–
110
145
110
145
110
180
250
–
250
250
–
250
215
250
215
250
270
305
–
90
70
90
70
45
35
70
80
90
35
24-10
24-11
24-22
24-27
28-2
28-3
28-5
28-6
28-7
300
270
310
310
290
–
322
325
–
40-5
40-9
40-10
40-35
40-AD
40-AG
40-AP
40-AV
74
110
180
285
250
270
180
110
270
250
325
28-12
28
AC Series/MS
solder contacts
Machined copper alloy contacts in a full range of sizes, with closed entry socket design in
the size 12 and 16 contacts. A heavy silver-plated finish is deposited on all solder contacts
for maximum corrosion resistance, maximum current carrying capacity and low millivolt drop.
SOLDER CONTACTS*
t
Pin/
Socket
Pin
Mating End
Size
Wire Barrel
Size
Allowable
Wire Size
Test Current**
b
Amps
13
10
7.5
5
13
10
7.5
5
16
18
20
22
16
18
20
22
16 Short†
16
16
1
4
Socket
Pin
16 Long
1
4
Socket
Pin
12
8
12
8
12
14
23
17
1
Socket
Pin
8
46
Socket
10
33
Pin
4
4
4
6
0
1
2
80
60
150
125
100
Socket
Pin
0
0
Socket
*
Solder Wells Filled
** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through
all contacts continuously. Please note that the electrical data given is not an establishment of electrical
safety factors. This is left entirely in the designer’s hands as he can best determine which peak voltage,
switching surges, transients, etc. can be expected in a particular circuit.
† The 10SL, 12S, 14S and 16S connectors require short contacts.
CONTACT ARRANGEMENT
SERVICE RATING
ALTITUDE VOLTAGE
DERATING** CHART
†
†
Nominal
Distance
Standard Sea
Level Conditions
Minimum
Pressure Altitude
50,000 Feet
Minimum
Flashover
Voltage
Pressure Altitude
70,000 Feet
Minimum
Flashover
Voltage
Recommended
Operating Voltage*
at Sea Level
Effective
Creepage Mechanical
Distance Spacing
M S
Service
Rating
MS
Service
Flashover
Voltage
Test
Voltage
Test
Voltage
Test
Voltage
D C
AC (RMS)
Nom.
Nom.
Inst.
A
250
700
200
500
1/16
1/8
Rating Airspace Creepage AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS)
1/16
1/8
Inst.
A
1/32
1/16
1/8
1/16
1/8
1400
2800
3600
4500
5700
8500
1000
2000
2800
3500
4500
7000
550
800
400
600
675
750
825
975
325
450
500
550
600
700
260
360
400
440
480
560
D
1250
1750
2450
4200
900
3/16
1/4
E
1250
1750
3000
3/16
1/4
D
3/16
1/4
900
B
5/16
1
E
3/16
1/4
1000
1100
1300
C
5/16
B
5/16
1
C
5/16
*
The values listed in Table I represent operating values
which include a generous safety factor. It may be nec-
essary for some applications to exceed the operating
voltages listed here. If this is necessary, designers will
find Table II useful for determining the degree to which
the recommended values of Table I can be exceeded.
†
Not corrected for changes in density due to variations in temperature
** No attempt has been made to recommend operating voltages. The designer must determine his own
operating voltage by the application of a safety factor to the above derating chart to compensate for circuit
transients, surges, etc.
29
AC Series/MS
crimp contacts
Machined from copper alloys and silver-plated for maximum corrosion resistance, with a
minimum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket
contacts are of the closed entry design. Crimp contacts are available for all insert arrange-
ments and are identified with a Amphenol® proprietary number. Gold plated contacts are also
available. (See how to order on page 59).
CRIMP CONTACTS*
Part
Number
Pin/
Socket
Mating End
Size
Wire Barrel
Size
Allowable
Wire Size
Required Wire
Adapter Sleeve
Test Current**
Amps
10-40553
Pin
Socket
Pin
16
18
20
22*
16
18
20
22*
–
–
–
13
10
7.5
5
13
10
7.5
5
16 Short†
16 Long
16
10-597109-161
10-40557
10-74696-6
–
–
–
16
10-597109-171
10-40561
Socket
Pin
10-74696-6
12
8
12
8
12
14
–
–
23
17
10-597109-131
10-40792
Socket
Pin
8
–
46
10-40793
Socket
10*
10-74696-1
33
10-40564
Pin
4
4
4
–
80
10-40565
Socket
6*
10-74696-2
60
10-581806-000
Pin
0
0
0
–
150
10-581808-000
Socket
2*
10-74696-7
125
*
When using wire adapter sleeve shown
** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through
all contacts continuously. Please note that the electrical data given is not an establishment of electrical
safety factors. This is left entirely in the designer’s hands as he can best determine which peak voltage,
switching surges, transients, etc. can be expected in a particular circuit.
†
The 10SL, 12S, 14S and 16S connectors require short contacts.
Additional contact variations are available; consult Amphenol, Sidney NY for information.
CONTACT ARRANGEMENT
SERVICE RATING
ALTITUDE VOLTAGE
DERATING** CHART
†
†
Recommended
Operating Voltage*
at Sea Level
Nominal
Distance
Standard Sea
Level Conditions
Minimum
Pressure Altitude
50,000 Feet
Minimum
Flashover
Voltage
Pressure Altitude
70,000 Feet
Minimum
Flashover
Voltage
Effective
Creepage Mechanical
Distance Spacing
M S
Service
Rating
D C
AC (RMS)
Nom.
Nom.
MS
Service
Flashover
Voltage
Test
Voltage
Test
Voltage
Test
Voltage
Inst.
A
250
700
200
500
1/16
1/8
Rating Airspace Creepage AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS)
1/16
1/8
Inst.
A
1/32
1/16
1/8
1/16
1/8
1400
2800
3600
4500
5700
8500
1000
2000
2800
3500
4500
7000
550
800
400
600
675
750
825
975
325
450
500
550
600
700
260
360
400
440
480
560
D
1250
1750
2450
4200
900
3/16
1/4
E
1250
1750
3000
3/16
1/4
D
3/16
1/4
900
B
5/16
1
E
3/16
1/4
1000
1100
1300
C
5/16
B
5/16
1
C
5/16
†
Not corrected for changes in density due to variations in temperature.
** No attempt has been made to recommend operating voltages. The designer must determine his own
operating voltage by the application of a safety factor to the above derating chart to compensate for circuit
transients, surges, etc.
30
RADSOK® Technology
RADSOK® Technology Advantages
RADSOK® Derating Chart –
Temperature vs. Current
Based on single conductors in free air. Wire
cross-section same size as pin contact cross-
sectional area.
RADSOK’S twisted grid configuration allows for 50% more current
to pass through the same size pin, while providing increased
reliability, ampacity and cycle durability as well as lower insertion
force, T-rise and voltage drop.
• HIGH RELIABILITY
Unique RADSOK® design and construction technology create
an electrical contact interface that exceeds typical interconnect
requirements. Applications in aerospace, medical, industrial,
automotive, mining, offshore, and other harsh environments
depend on the high reliability of Amphenol’s RADSOK® technology.
• LOW CONTACT ENGAGEMENT/SEPARATION FORCES
The hyperbolic lamella socket contact construction distributes
normal forces over a high percentage of the mating pin surface.
This creates a smooth, even engagement effort. This force
distribution also contributes to excellent performance in vibration
applications with resistance to typical fretting corrosion.
• LOW CONTACT RESISTANCE
The large interface area between the socket lamella and pin
surface result in very low contact resistance, enabling the
RADSOK® contacts’ high current ratings compared to traditional
power contact designs.
• HIGH MATING CYCLE DURABILITY
RADSOK® contacts with typical silver plating finishes have
demonstrated survival of 20,000 mating cycles. Specialized
plating and contact lubricants can extend cycle life to 200,000
matings or higher. Even with continuous exposure to harsh
environmental abuse (salt, sand, and high humidity), RADSOK®
contacts have been tested to maintain low contact resistance
beyond 10,000 mating cycles.
RADSOK® Socket Table
CRIMP CONTACT DATA
RADSOK® Part Number
Socket Contact
Mating
Size
Wire
Barrell Size
Allowable
Wire Size
Required Wire
Adapter Sleeve
Test Current**
AMPS
Silver
Gold
12
14
-
-
35
***
10-639140-121
10-639140-1231
12
8
12-14
8
10*
-
70
***
10-639140-081
10-639140-041
10-639140-001
10-639140-0831
10-639140-0431
10-639140-0031
8
4
0
10-74696-1
4
6*
-
120
***
4
10-74696-2
0
2*
-
250
***
0
10-74696-7
*
When using wire adapter sleeve shown
** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through all contacts continuously. Please note that the electrical
data given is not an establishment of electrical safety factors. This is left entirely in the designer’s hands as he can best determine which peak voltage, switching
surges, transients, etc. can be expected in a particular circuit.
*** Consult Amphenol Industrial for test current at these wire sizes.
31
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Front of
Socket Insert
Front of
Socket Insert
Insert Arrangement
Service Rating
10SL-3
10SL-4
12S-3
12S-4
12-5
D
14S-1
14S-2
Inst.
4
A
3
A
2
A
2
D
1
A
3
Number of Contacts
Contact Size
1
16
16
16
16
12
16
16
100° Rotation
of 14S-2
Insert Arrangement
Service Rating
14S-4
14S-5
Inst.
5
14S-6
14S-7
14S-9
14S-10
Inst.
4
D
1
Inst.
6
A
3
A
2
Number of Contacts
Contact Size
16
16
16
16
16
16
100° Rotation
of 14S-7
Insert Arrangement
Service Rating
14S-12
14S-A7
14-3
A
16S-1
16S-3
16S-4
A
3
A
7
A
7
B
1
D
2
Number of Contacts
Contact Size
1
16
16
8
16
16
16
Insert Arrangement
Service Rating
16S-5
16S-6
16S-8
16-2
E
16-7
A
16-9
A
A
3
A
3
A
5
Number of Contacts
Contact Size
1
1
2
2
2
16
16
16
12
8
16
12 16
CONTACT LEGEND
16
12
8
4
0
32
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement
Service Rating
16-10
A
16-11
A
16-12
16-13
A
16-59
A
18-1
A
1
4
B, C, F, G = A; bal. = Inst.
Number of Contacts
Contact Size
3
2
2*
4
10
16
12
12
12
12
Insert Arrangement
Service Rating
18-3
D
18-4
D
18-5
18-6
18-7
18-8
A
D
D
1
4
B
1
8
Number of Contacts
Contact Size
2
4
2
1
1
7
12
16
12 16
12 16
Insert Arrangement
Service Rating
18-9
Inst.
18-10
A
18-11
A
18-12
A
18-13
A
18-14
A
Number of Contacts
Contact Size
2
5
4
5
6
1
8
3
1
4
1
12 16
12
12
16
12
16
Insert Arrangement
Service Rating
18-15
A
18-16
C
18-17
Inst.
18-19
A
18-20
18-22
D
A
5
Number of Contacts
Contact Size
4**
12
1
2
5
10
3
12
12 16
16
16
16
CONTACT LEGEND
16
12
8
4
0
*A = Iron: B = Constantan
**A, C = Iron; B, D = Constantan
33
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
H
A
D
G
B
I
F
J
250˚
C
E
250° Rotation
of 18-1
110° Rotation
of 18-20
260° Rotation
of 18-20
Insert Arrangement
Service Rating
18-24
18-29
A
18-30
A
18-31
A
20-2
D
20-3
D
B, C, F, G = A; Bal. = Inst.
Number of Contacts
Contact Size
10
16
5
5
5
1
3
16
16
16
0
12
Insert Arrangement
Service Rating
20-4
D
20-6
20-7
20-8
Inst.
20-9
H = D; Bal. = A
20-11
Inst.
13
D
3
A, B, H, G = D; C, D, E, F = A
Number of Contacts
Contact Size
4
8
2
8
4
1
7
12
16
16
16
12 16
16
Insert Arrangement
Service Rating
20-12
A
20-14
A
20-15
A
20-16
A
20-17
20-18
A
A
Number of Contacts
1
4
1
2
8
3
7
2
7
5
1
3
6
Contact Size
16
16
12
12
12 16
12 16
12
CONTACT LEGEND
16
12
8
4
0
34
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement
Service Rating
20-19
20-20
A
20-21
A
20-22
A
20-23
20-24
A
A
3
8
A
2
8
Number of Contacts
Contact Size
1
3
1
8
3
3
2
2
4
12
12 16
8
16
8
16
100˚
A
B
L
L
M
C
B
C
B
C
N
L
F
K
M
N
F
K
M
D
T
S
P
R
E
E
K
G
H
G
H
N
E
A
A
D
J
J
D
J
F
250˚
H
G
100° Rotation
of 20-11
250° Rotation
of 20-11
Insert Arrangement
Service Rating
20-25
Inst.
13
20-27
A
20-29
A
20-30
Inst.
13
20-33
20-51
A
A
3*
8
Number of Contacts
Contact Size
14
17
11
16
16
16
16
16
Insert Arrangement
Service Rating
20-57
20-58
20-59
A
20-66
20-79
A
A
A
H = D; Bal. = A
7* 1*
Number of Contacts
Contact Size
7*
5
5
3*
1
5
12 for #14 or 16 wire
12 16
8 for #10 or 12 wire
16 12 for #10 wire
16 12 for #16 wire
CONTACT LEGEND
16
12
8
4
0
35
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement
Service Rating
22-1
D
22-2
D
22-4
A
22-5
D
22-6
D
22-7
E
Number of Contacts
Contact Size
2
3
2
2
2
4
2
1
1
8
8
8
12
12 16
8
16
0
Insert Arrangement
Service Rating
22-8
E
22-9
E
22-10
22-11
B
22-12
22-13
E
4
D
E = D; A, B, C, D = A
Number of Contacts
Contact Size
2
3
2
2
8
3
4
1
12
12
16
16
16
12 16
M
V
L
G
A
A
P
K
B
D
U
S
N
R
J
F
E
C
H
D
B
C
T
H
G
E
F
Insert Arrangement
Service Rating
22-14
A
22-15
D = E; A, B, C, E, F = A
22-16
A
22-17
A = D; Bal. = A
22-18
A, B, F, G, H = D; C, D, E = A
Number of Contacts
Contact Size
19
5
1
3
6
1
8
8
16
12 16
12 16
12 16
16
CONTACT LEGEND
16
12
8
4
0
36
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
B
E
K
L
M
P
C
D
J
H
N
G
F
Insert Arrangement
Service Rating
22-19
A
22-20
A
22-21
A
22-22
22-23
A
4
8
H =D; Bal = A
Number of Contacts
Contact Size
14
9
1
2
8
16
16
0
16
12
Insert Arrangement
Service Rating
22-24
22-27
22-28
22-33
22-34
D
C, D, E = D; A, B, F = A
J = D; Bal. = A
A
7
A, B, C, D = D; E, F, G = A
Number of Contacts
Contact Size
2
4
1
8
8
7
3
2
12 16
16
12
16
12 16
J
A
G
K
A
C
F
H
F
B
C
H
B
L
P
M
E
N
E
D
D
Insert Arrangement
Service Rating
22-36
22-63
22-65
22-70
A
22-80
H = D; Bal. = A**
A
H = D; Bal. = A
8*
A
Number of Contacts
Contact Size
8
4
8
8
5
3*
12
12 16
12 for #14 or 16 wire
12 16
8 for #10 or 12 wire
* Solderless
** A, C, E, G = Iron
B, D, F, H = Constantan
CONTACT LEGEND
16
12
8
4
0
37
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
A
B
B
F
A
C
L
G
A
F
A
C
C
K
M
C
E
B
F
D
J
E
H
G
G
P
G
N
F
H
N
E
B
E
B
J
K
D
M
L
I
O
E
C
P
R
D
D
H
F
D
S
G
Insert Arrangement
Service Rating
24-2
D
24-3
D
24-5
A
24-6
24-7
A
A, G, H = D; Bal. = A
Number of Contacts
Contact Size
7
2
5
16
8
2
14
12
12 16
16
12
12 16
A
A
B
E
C
F
A
C
F
B
A
G
G
B
A
E
B
D
F
E
D
E
C
B
G
I
D
C
H
D
Insert Arrangement
Service Rating
24-9
A
24-10
24-11
A
24-12
A
24-16
A
7
8
A, B, F, G = D; C, D, E = A
Number of Contacts
Contact Size
2
3
6
2
4
3
1
8
3
3
4
8
12
12
12 16
A
A
D
N
A
J
B
H
B
D
C
A
B
M
K
B
C
E
H
C
G
C
J
K
K
L
L
C
G
D
D
F
D
B
A
J
E
F
E
H
F
E
Insert Arrangement
Service Rating
24-17
D
24-19
A
24-20
24-21
D
24-22
D
D
4
8
Number of Contacts
Contact Size
2
3
12
2
9
1
9
12 16
16
12 16
8
16
CONTACT LEGEND
16
12
8
4
0
38
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
L
B
C
N
D
P
A
E
R
F
S
G
T
H
U
J
F
E
B
C
E
A
E
A
K
M
Q
D
B
D
B
V
G
D
W
X
Y
Z
C
C
Insert Arrangement
Service Rating
24-27
24-28
Inst.
24
24-51
A
24-52
Hi-Volt
1
24-53
E
7
A
5*
8
Number of Contacts
Contact Size
5*
16
16
B, E for AN#10 or 12 wire
A, C, D for AN #8 wire
12
L
H
P
J
A
J
P
F
K
A
N
E
K
F
F
A
C
N
K
R
D
M
G
B
M
F
L
E
B
J
E
G
B
H
A
D
N
S
L
M
B
C
R
P
E
H
C
D
D
C
A
C
D
F
B
E
Insert Arrangement
Service Rating
24-58
24-59
A
24-60
A
24-65
A
24-66
D
A
3
Number of Contacts
Contact Size
3
8
7
7
7
7*
11
4
7
12 16
12 16
8 for #10 or 12 wire
12 16
12
E
D
90˚
A
B
C
N
D
F
R
P
F
A
F
A
C
E
F
S
G
T
H
J
S
E
A
G
H
J
C
B
A
G
G
E
B
E
B
V
N
U
K
L
M
P
Q
D
B
T
U
R
V
D
C
D
M
L
K
C
W
X
Z
Insert Arrangement
Service Rating
24-67
24-71
A
24-75
A
24-79
24-80
Inst.
23
Inst.
19
A
5
8
Number of Contacts
Contact Size
2*
8
5*
5
2
12
8 for #10 or 12 wire
8
8 for #16 wire
16
CONTACT LEGEND
16
12
8
4
0
39
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
16
A
E
H
F
B
D
K
A
1
15
23
E
90˚
B
D
A
C
2
D
P
F
14
J
L
B
D
24
28
R
V
U
G
T
17
3
E
J
H
U
F
S
P
13
12
11
G
J
C
G
H
J
C
B
A
P
M
K
Q
H
C
4
M
L
N
25 18
22 27
N
T
26
5
R
V
S
19
21
20
G
N
6
10
Z
W
X
Y
M
K
a
7
9
8
L
F
E
Insert Arrangement
Service Rating
24-84
24-96
24-AJ
Inst.
25
28-1
28-2
D
A
A
3
8
A, J, E = D; Bal. = A
Number of Contacts
Contact Size
1
18
28
16
6
2
12
12
12 (Coax)
RG-188/U
16
12
12 16
or RG-174/U
A
A
S
A
C
B
A
B
A
E
B
D
P
G
E
F
C
B
C
B
D
C
Insert Arrangement
Service Rating
28-3
28-4
G, P, S = E; Bal. = D
28-5
D
28-6
28-7
D
E
3
8
D
3
4
Number of Contacts
Contact Size
2
7
2
4
1
2
2
12 16
12 16
4
R
A
H
G
J
K
L
J
P
F
A
N
P
R
S
E
A
J
H
A
S
B
F
a
T
b
F
U
A
B
K
G
F
B
C
N
C
G
M
L
U
Z
V
W
X
E
B
G
H
M
B
D
K
d
F
E
D
C
D
V
Y
M
E
L
E
L
W
X
M
K
C
T
I
G
J
D
D
C
H
Insert Arrangement
Service Rating
28-8
L, M = E; B = D; Bal. = A
10
12 16
28-9
D
28-10
G = D; Bal. = A
28-11
A
28-12
A
Number of Contacts
Contact Size
2
6
6
2
4
2
8
3
4
18
26
12 16
12
12 16
16
CONTACT LEGEND
16
12
8
4
0
40
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
C
A
B
K
D
K
A
R
A
C
R
E
T
G
V
F
M
D
B
100˚
B
P
J
S
J
K
Z
H
L
a
H
N
B
C
J
E
L
T
a
M
T
L
G
W
P
S
e
U
A
F
N
M
C
b
U
Z
U
S
N
V
c
X
Y
b
D
D
g
R
d
H
V
R
G
Q
F
M
Y
P
E
E
d
h
L
P
f
k
W
j
X
F
K
N
m
l
G
J
H
100° Rotation
of 28-12
Insert Arrangement
Service Rating
28-13
A
28-15
A
28-16
A
28-17
R = B; M, N, P = D; A to L = A
Number of Contacts
Contact Size
26
35
20
15
16
16
16
16
A
J
A
A
B
L
B
B
L
J
C
N
K
K
M
K
E
C
D
P
H
M
C
J
L
M
G
E
D
G
H
F
H
G
F
E
Insert Arrangement
Service Rating
28-18
28-19
H, M = B; A, B = D; Bal.= A
28-20
A
M = C; G, H, J, K, L = D; A, B = A; Bal = Inst.
Number of Contacts
Contact Size
12
16
4
6
10
4
12 16
12 16
B
C
M
F
J
A
L
L
N
T
A
L
b
D
P
C
A
E
T
G
F
U
h
H
F
B
J
H
F
B
P
R
S
U
K
a
R
f
M
K
N
Z
S
A
B
C
D
W
V
j
X
N
c
e
d
M
k
m
C
g
E
H
E
D
n
E
D
p
J
K
r
s
Insert Arrangement
Service Rating
28-21
A
28-22
D
28-51
A
28-59
A
Number of Contacts
Contact Size
37
3
3
12
7
10
16
4
16
12
12 16
CONTACT LEGEND
16
12
8
4
0
41
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
R
A
N
A
N
C
P
K
B
R
M
B
R
M
P
P
A
T
T
D
N
L
S
T
L
L
C
C
D
D
K
J
K
J
E
M
B
A
F
S
S
E
E
C
B
H
H
F
F
H
J
Insert Arrangement
Service Rating
28-66
A
28-72
28-74
A
28-75
A
–
3
Number of Contacts
Contact Size
2
14
9* 4*
3*
9*
7*
8 for #10 wire
8
12
4 (Coax) RG-59 A/U
16
8
8 for #10 wire
16
A
N
B
C
B
R
H
A
M
P
1
4
2
A
E
3
6
T
L
C
D
F
D
K
G
F
I
B
C
H
5
G
S
J
E
J
H
F
E
D
Insert Arrangement
Service Rating
28-79
A
28-82
D
28-84
28-AY
A
A
9
8
Number of Contacts
Contact Size
9
7
8
2
4
4
5
16
8
12
4
16
B
F
A
K
A
C
F
A
E
A
C
G
E
D
D
E
L
B
D
E
B
C
O
B
H
G
J
M
D
C
H
N
J
Insert Arrangement
32-1
A = E; B, C, D, E = D
32-2
E
32-3
32-4
F, J, K, N = A; Bal. =
Service Rating
D
D
Number of Contacts
2
3
3
2
1
2
2
4
2
12
CONTACT LEGEND
16
12
8
4
0
42
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
M
N
P
A
B
J
W
T
H
I
A
C
I
D
c
E
D
E
E
F
Y
R
G
L
H
K
L
X
Y
Z
U
J
c
A
B
C
d
F
G
K
M
N
A
B
h
j
S
O
P
R
Z
a
b
P
e
J
K
L
V
d
e
M
N
T
O
S
F
f
C
H
T
W
k
a
R
U
D
g
G
U
V
I
b
W
X
S
X
B
V
O
Insert Arrangement
Service Rating
32-5
D
32-6
32-7
A, B, h, j = Inst.; Bal = A
28
32-8
A
A
Number of Contacts
Contact Size
2
2
3
2
16
7
6
24
0
4
8
12 16
12 16
12 16
N
A
A
B
F
A
M
B
S
P
Y
A
B
E
J
C
D
F
G
X
R
L
C
E
G
B
W
H
K
K
D
Z
C
D
E
F
G
V
T
J
E
D
C
H
I
J
K
L
M
N
U
H
F
L
M
N
O
P
G
Insert Arrangement
Service Rating
32-9
D
32-10
A, F = E; G = B; B, E = D; C, D = A
32-12
C, D, E, F, G = A; Bal. = D
10
32-13
D
Number of Contacts
Contact Size
2
4
12
16
2
4
2
8
3
5
5
18
16
12 16
12 16
A
B
1
A
C
I
D
100˚
10
2
D
A
B
G
H
B
C
J
E
K
F
11
9
3
4
N
V
L
M
R
P
D
E
12
13
O
S
T
8
F
H
U
C
7
5
X
W
G
6
100° Rotation
of 32-6
Insert Arrangement
Service Rating
32-14
D
32-15
D
32-16
A
32-17
D
4
4
Number of Contacts
Contact Size
13
2
6
2
4
3
8
2
16
12
0
12
12 16
CONTACT LEGEND
16
12
8
4
0
43
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
B
1
A
B
13
1
D
C
K
T
c
E
C
S
i
E
U
16
2
2
F
N
H
12
D
K
J
F
G
H
M
L
3
15
11
L
b
s
17
M
c
P
J
3
11
P
Z
N
O
Y
R
23
14
18
W
R
T
V
X
V
e
4
5
6
S
b
U
d
W
n
14
13
a
X
26
27
31
19
20
24
25
a
r
Y
Z
q
d
u
f
g
15
19
16
17
22
21
f
25
24
28
21
8
j
p
h
m
h
k
y
g
j
k
30
23
m
r
12
p
x
q
n
v
t
u
10
4
t
v
AC
29
s
18
20
y
w
x
w
z
AB
AA
7
z
AA
5
9
22
9
10
AD
AE
BB
CC
8
6
AG
AF
7
Insert Arrangement
Service Rating
32-22
A
32-25
A
32-31
A
32-48
Inst.
48
Number of Contacts
Contact Size
54
25
31
16
12
16
16
M
N
P
90˚
B
M
A
A
R
n
T
L
H
S
K
a
j
D
b
N
Y
c
Z
T
B
C
U
C
J
I
d
c
A
B
C
Y
k
r
E
X
W
m
i
H
F
U
O
P
f
Z
q
J
g
V
h
D
E
V
D
E
d
e
p
s
a
F
W
K
L
A
E
B
D
C
R
F
H
G
b
F
H
t
u
v
w
S
X
G
G
100° Rotation
Insert Arrangement
Service Rating
32-52
D
32-53
t, u = E; Bal = Inst.
37
12 16
32-56
A
32-57
**
2
Number of Contacts
Contact Size
2
0
6
5
24
6
6
12
16 12 for #10 wire
12
0 (Coax) RG-71/U
A
B
D
Y
A
R
H
B
a
X
C
q
Z
W
p
C
E
F
G
L
H
F
P
A
S
I
J
n
V
S
D
J
Z
X
T
K
M
N
T
w
b
R
P
m
D
A
B
E
F
U
T
a
s
U
Y
c
v
t
k
O
S
E
B
C
T
U
d
V
j
N
D
K
H
W
f
U
i
V
C
g
J
h
R
W
X
K
P
L
M
L
N
M
Insert Arrangement
Service Rating
32-58
32-59
A
32-60
A
32-62
–
4
**
Number of Contacts
Contact Size
40
2
15
8
2
4
1
2
16
2
4 (Coax) RG-161/U
or RG-179/U
16 8 (Coax) RG-161/U
16 8 (Coax)
RG-124/U
8
12 16 8 (Coax)
RG-124/U16
CONTACT LEGEND
16
12
8
4
0
44
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
21
41
1
B
A
20
36
D
2
E
C
19
A
B
22
G
J
H
F
3
18
K
M
L
23
35
1
37
O
P
9
N
8
4
R
44
U
17
16
15
14
T
V
W
24
D
S
b
38
C
F
34
E
45
5
X
g
Y
Z
a
k
25
c
43
f
d
e
q
39
33
46
j
G
H
K
L
M
h
t
7
2
6
6
26
8
p
x
n
r
m
42
31
J
40
32
13
s
u
v
27
7
y
w
N
P
AC
AB
28
z
AA
29
30
AD
3
R
AE
Q
5
9
12
AF
AG
4
11
10
Insert Arrangement
Service Rating
32-64
Inst.
54
32-68
A
32-73
A
32-75
8, 9 = D
Number of Contacts
Contact Size
12
4
46
2
7
16
16 4 (Coax) RG-58 C/U
16
12
8 (Coax)
RG-180 B/U
A
B
1
9
2
3
C
D
E
D
C
A
A
B
F
G
H
P
Z
J
K
T
L
M
V
4
6
7
5
N
O
Y
R
U
D
S
W
C
F
E
X
a
8
10
11
12
c
b
d
e
f
E
g
j
h
k
G
H
J
K
L
M
n
p
q
y
r
m
u
s
t
v
w
x
13
14
15
19
16
N
P
z
AA
AB
AC
AH
AG
R
Q
B
AD
AE
17
18
AF
Insert Arrangement
Service Rating
32-76
A
32-79
32-82
A
32-AF
A
D
Number of Contacts
Contact Size
19
4
1
8
12
16
4
4
55
12
4
16
A
A
A
B
C
G
A
F
D
E
F
H
T
D
B
E
B
I
J
K
L
M
N
O
P
U
R
V
S
C
B
C
D
C
W
Insert Arrangement
Service Rating
36-1
D
36-3
D
36-4
36-5
A
A = D; B, C = A
Number of Contacts
Contact Size
4
18
3
3
3
0
4
12 16
0
12
0
CONTACT LEGEND
16
12
8
4
0
45
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
B
A
S
M
A
A
D
C
H
C
H
E
J
B
E
K
D
U
V
I
G
M
F
L
O
P
Z
a
F
D
E
G
F
B
I
L
N
K
n
I
J
J
M
A
R
O
R
N
P
T
P
Z
S
O
X
V
U
S
W
X
V
e
d
e
Y
T
a
H
U
W
c
Y
B
Y
a
b
k
Z
d
j
f
g
e
j
r
b
f
d
p
c
m
C
h
K
E
C
f
W
h
t
g
v
k
t
F
b
n
R
p
u
v
m
L
s
x
u
X
c
G
w
r
s
w
z
x
y
y
z
T
N
D
Insert Arrangement
Service Rating
36-6
A
36-7
A
36-8
A
36-9
A
Number of Contacts
Contact Size
2
4
4
7
40
1
46
1
4
2
8
14 14
12 16
0
12 16
12 16
A
B
A
B
A
B
P
N
C
P
D
Q
E
F
S
G
100˚
C
D
Q
F
G
T
E
R
110˚
C
D
E
F
G
T
M
L
H
J
K
Y
p
L
Z
M
N
H
J
K
L
Z
q
z
M
a
r
N
b
s
H
J
K
L
M
N
O
R
T
U
R
S
O
P
S
U
k
K
J
A
O
P
Q
R
S
U
k
V
c
W
m
X
a
r
b
s
V
W
m
X
Y
p
c
c
V
W
m
X
n
Y
Z
q
a
b
s
B
C
d
e
f
g
v
h
j
k
d
e
t
f
g
h
j
d
f
g
v
e
t
h
j
Q
n
q
z
H
p
r
n
u
w
x
G
D
E
t
w
F
u
v
w
x
u
x
y
y
y
z
100° Rotation
of 36-10
110° Rotation
of 36-10
Insert Arrangement
Service Rating
36-10
A
36-11
36-12
36-13
N, P, Q = E; Bal. = A
15
12 16
A
A
Number of Contacts
Contact Size
48
48
48
2
16
16
16
B
A
S
A
e
A
C
D
E
J
R
B
100˚
J
B
F
L
G
M
W
f
T
H
d
U
Q
P
C
I
N
K
O
T
I
C
P
K
P
U
c
V
R
a
S
b
D
k
V
e
X
Q
m
c
Y
j
f
Z
j
d
h
g
p
N
E
N
L
b
W
G
H
D
t
k
m
h
Z
g
n
u
v
w
M
a
X
M
F
r
s
G
E
Y
L
y
x
H
K
F
z
J
100° Rotation
of 36-7
Insert Arrangement
36-14
5
36-15
35
36-16
Service Rating
A
D
6
M = D; Bal. = A
Number of Contacts
5
7
8
40
CONTACT LEGEND
16
12
4
0
46
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
S
M
A
B
L
A
F
L
B
D
100˚
I
U
C
H
E
J
C
D
E
F
G
V
O
P
110˚
Z
a
D
E
G
M
I
H
J
K
M
b
N
c
J
N
A
K
V
O
T
P
S
b
P
R
a
d
e
R
S
T
j
U
W
g
H
V
e
W
f
X
g
p
Y
U
B
c
Y
X
Y
Z
a
Z
j
d
h
C
f
K
m
W
h
e
f
t
d
k
R
b
c
n
F
G
u
v
L
X
w
k
m
r
s
y
x
T
N
z
110° Rotation
of 36-7
100° Rotation
of 36-9
Insert Arrangement
Service Rating
36-17
A
36-18
A
36-20
A
2
Number of Contacts
Contact Size
7
40
1
2
8
14 14
12 16
2
8
30
12 16
4
12 16
B
n
C
D
A
b
A
a
r
B
A
Z
E
U
k
K
Y
q
C
H
J
X
p
F
V
m
z
c
Y
D
L
M
c
t
N
P
R
S
X
E
m
s
d
g
Z
r
T
j
W
k
W
V
F
t
n
a
b
s
f
g
h
x
i
d
u
H
f
j
q
p
i
v
w
D
C
U
J
AA AB
T
y
AC
AH
K
h
S
L
AD
R
B
M
P
N
AE
AF
Insert Arrangement
Service Rating
36-51
D
36-52
A
36-54
A
Number of Contacts
Contact Size
2
0
2
4
52
8
8
31
16
16
B
P
C
D
B
A
b
A
A
a
r
D
B
C
H
E
J
Z
H
Y
C
K
E
M
F
J
G
F
L
c
Y
D
K
U
L
I
N
R
S
T
N
X
K
n
M
E
O
m
R
s
P
T
S
d
k
Z
a
b
V
W
X
U
W
X
V
W
V
F
t
n
c
c
d
v
f
g
h
i
j
k
Y
a
b
k
Z
d
j
e
f
g
H
m
n
p
q
r
s
AA
t
f
m
j
h
q
p
t
AB
z
g
L
u
i
w
x
y
p
U
u
J
v
AE
T
AH
AC
r
h
s
w
z
S
AD
AF
x
y
R
M
P
N
AJ
Insert Arrangement
Service Rating
36-55
36-59
36-60
A
8
A
3
**
7
Number of Contacts
Contact Size
31
50
40
16 8 for #6 wire
16 12 for #10 wire
16 12 for #10 wire
CONTACT LEGEND
16
12
8
4
0
47
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
B
P
C
R
A
D
A
A
H
Y
K
E
M
F
J
U
L
N
S
T
D
B
D
B
Z
a
b
V
W
X
c
d
v
f
g
h
i
j
k
m
n
p
q
r
s
AA
t
AB
z
u
w
x
y
AE
AH
AC
AD
AF
C
C
AJ
Insert Arrangement
Service Rating
36-64
36-65
36-71
A
–
4
–
4
Number of Contacts
Contact Size
3
50
0 (Coax) RG-11/U,
RG-12/U or RG-13/U
0 (Coax) RG-59/U, RG-62/U
or RG-71/U
12 16
1
2
A
48
53
59
68
77
49
54
60
69
78
31 32
29 33 34 37
28 30 36 35 38
3
4
5
9
50
55
63
72
81
86
88
51
56
64
73
52
57
65
74
82
87
89
F
B
6
7
8
58
67
76
84
61
70
79
85
62
71
80
66
75
83
27 26 48 41 40 39
25 47 46 42 43
24 23 45 44
10 11
13 12
15 14
18 16
17
E
C
G
22 21 20
91
90
19
D
Insert Arrangement
Service Rating
36-73
36-74
A
36-75
–
7
A
Number of Contacts
Contact Size
43
1
48
4 (Coax) RG-62B/U
16 8 (Coax) RG-187/U
16 for #14 wire
1
4
2
5
10
1
A
3
6
7
8
F
B
9
2
11
13
9
18
27
36
10
19
28
37
11
12
21
30
39
13
14
15
16
17
8
3
20
29
38
14
12
22
31
23
32
40
24
33
41
45
25
34
42
26
35
E
C
G
7
4
43
46
44
47
D
6
5
Insert Arrangement
Service Rating
36-76
A
36-77
36-78
A
D
7
4
Number of Contacts
Contact Size
47
2
12
16
16
8
CONTACT LEGEND
16
12
8
4
0
48
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
1
1
A
2
3
4
5
2
3
4
5
F
B
6
7
8
9
10
15
6
7
8
9
10
15
11
12
13
14
11
12
13
14
E
C
G
16
17
18
19
16
17
18
19
D
20
20
Insert Arrangement
Service Rating
36-79
A
36-80
A
36-83
–
7
Number of Contacts
Contact Size
20
20
12
12 for #10 wire
4 (Coax) RG-58/U
S
T
A
R
B
Q
d
U
1
C
c
P
e
k
2
8
V
D
N
9
f
10
12
m
j
b
3
7
W
E
M
g
h
a
11
5
F
X
4
6
L
Y
Z
G
K
H
J
Insert Arrangement
Service Rating
36-85
36-97
C
36-99
D
M = D; Bal. = A
35
Number of Contacts
Contact Size
1
3
4
3
3
3
16 for #12 wire
4/0
8
12 16
A
A
I
B
J
C
K
d
z
e
y
D
N
E
F
G
f
Q
A
B
x
P
g
O
H
T
L
R
C
w
Y
h
j
S
T
N
D
E
M
O
P
R
S
c
v
Z
N
B
X
M
a
b
u
U
V
d
W
e
X
W
U
L
k
F
n
V
q
K
G
t
m
Y
Z
a
b
J
H
C
G
s
r
p
c
Insert Arrangement
Service Rating
36-AF
A
40-1
D
40-5
A
5
0
Number of Contacts
Contact Size
48
6
24
16
12 16
CONTACT LEGEND
16
12
8
4
0
2/0
4/0
49
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
A
B
C
F
D
E
A
G
B
N
E
P
G
L
H
C
D
K
I
J
H
F
1
J
19
K
2
18
P
Q
R
3
M
N
O
W
d
S
T
i
20
I
L
17
4
X
U
V
Y
g
Z
a
21
29
16
Q
5
30
M
h
c
b
28
22
O
e
l
f
15
6
m
U
R
S
27
T
23
j
o
14
k
r
n
s
7
X
V
W
c
24
26
q
u
p
t
Y
b
13
8
25
Z
a
12
9
Insert Arrangement
Service Rating
40-9
40-10
A
40-30
A
A
Number of Contacts
Contact Size
1
22 24
12 16
4
4
9
8
16
16
29
12
1
4
8
A
R
k
B
C
T
n
D
16
24
42
1
1
23
41
53
2
15
E
F
H
a
J
K
c
L
M
f
25
43
22
40
3
2
17
28
18
26
44
N
i
P
S
U
p
V
W
r
14
21
4
27
3
54
X
Y
u
Z
b
d
g
29
31
34
28
20
19
5
13
4
27
45
19
21
55
h
j
m
q
s
30
39
29
33
35
23
t
v
w
x
y
z
AA AB
AL AM AN
56
6
7
26
20
60
52
46
47
12
5
AC
AD AE
AH AJ AK
AF
32
57
18
38
25
30
59
AV AW AX AY
AP AR AS AT AU
51
36
58
49
34
11
6
8
48
33
31
AZ
BA BB BC BD BE BF BH
17
37
50
35
32
BJ BK
BL BM BN BP BR
BS BT BU BV
9
16
10
22
7
24
10
15
8
9
11
14
13
12
Insert Arrangement
Service Rating
40-35
D
40-53
A
40-56
A
Number of Contacts
Contact Size
35
60
85
12
16
16
1
1
4
2
6
24
2
1
3
5
7
23
41
25
43
3
22
40
39
42
54
60
26
44
56
4
28
29
8
9
10 11 12 13 14 15
21
27
5
16 17 18 19 20 21 22 23 24
20
19
18
53
52
51
55
45
46
47
6
7
8
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 41
42 43 44 45 46 47 48 49
38
37
16
59
50
35
14
57
48
33
12
30
31
10
58
4
2
50 51 52
54 55 56
53
17
36
15
49
34
13
32
11
9
57
59
58
3
Insert Arrangement
Service Rating
40-57
40-61
40-62
A
E
4
0
A
3
Number of Contacts
Contact Size
1
55
60
8
12 16
16
CONTACT LEGEND
16
12
8
4
0
50
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
1
24
P
A
23
2
1
N
f
22
40
3
25
42
54
26
44
B
R
4
21
41
53
27
h
S
k
43
55
M
K
g
b
28
20
5
T
X
i
45
p
C
56
57
U
60
59
50
29
30
39
19
6
7
61
46
47
52
j
n
d
L
V
D
38
37
q
Z
18
17
51
c
4
2
31
m
a
W
58
49
34
48
33
11
8
32
36
E
9
16
Y
35
14
15
10
3
F
J
13
12
H
Insert Arrangement
Service Rating
40-63
A
40-64
–
40-66
–
4
Number of Contacts
Contact Size
61
3
20 13
16 for #14 wire
12 16 8 (Coax) RG-124/U
0 (Coax) RG-63B/U
A
N
A
B
1
P
B
M
2
3
4
5
W
6
7
8
9
10
R
L
C
11 12 13 14 15 16 17 18
X
C
F
E
J
D
19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35
36 37 38 39 40 41 42 43 44
45 46 47 48 49 50 51 52
53 54 55 56 57
K
V
D
S
H
J
E
T
U
H
L
F
K
58 59 60 61
M
G
Insert Arrangement
Service Rating
40-67
A
40-68
A
40-70
A
Number of Contacts
Contact Size
1
10
21
61
16
4 (Coax) RG-59/U
8
16
1
24
23
2
1
A
B
22
40
3
25
42
54
26
44
6
4
21
41
53
27
43
55
2
28
20
5
5
45
56
57
60
59
50
29
30
39
19
6
7
C
F
E
J
61
46
47
D
52
51
38
37
18
17
H
31
4
3
58
49
34
48
33
11
8
32
36
9
16
35
14
15
10
L
K
M
13
12
Insert Arrangement
Service Rating
40-72
A
40-73
A
40-74
A
Number of Contacts
1
10
61
1
1
4
Contact Size
RG-9B/U
16
4 (Coax) RG-9B/U
16 12
4 (Coax) RG-62/U
0 (Coax)
CONTACT LEGEND
16
12
8
4
0
51
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
1
2
3
4
1
A
B
5
6
7
8
9
10 11
5
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
4
2
C
F
E
J
D
H
59 60 61 62
L
3
K
M
Insert Arrangement
Service Rating
40-75
E
40-80
A
40-81
A
62
Number of Contacts
Contact Size
1
4
0
1
10
4
12
16
16 for #14 wire
24
42
1
1
2
3
4
23
2
1
25
43
22
40
3
5
6
7
8
9
10 11
26
44
41
53
21
4
27
12 13 14 15 16 17 18 19
54
28
20
5
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
45
55
39
29
56
6
19
18
17
60
59
52
46
47
57
7
38
30
4
2
51
36
58
49
34
8
48
33
31
37
50
35
32
9
16
59 60 61 62
10
15
3
11
14
13
12
Insert Arrangement
Service Rating
40-82
A
40-85
A
40-86
–
4
Number of Contacts
Contact Size
62
60
16
16 for #14 wire
0 (Coax) RG-115A/U
38
20
2
A
6
1
37
21
10
B
H
8
19
6
9
22
36
18
7
35
34
33
23
24
25
G
C
5
7
2
3
1
11
26
17
5
4
E
16
D
12
F
32
13
15
14
4
3
31
27
30
28
29
Insert Arrangement
Service Rating
40-87
40-AD
A
40-AG
A
D
7
4
Number of Contacts
Contact Size
4
4
0
38
8
12
CONTACT LEGEND
16
12
8
4
0
52
AC Series/MS
contact arrangements
front face of pin insert or rear face of socket insert illustrated
33
34
B
H
31
35
N
C
32
7
30
36
8
1
19
18
9
M
D
29
37
11
A
B
10
28
26
38
40
2
4
27
17
39
A
3
L
E
6
12
21
5
25
16
24
20
K
F
15
13
14
J
23
22
G
Insert Arrangement
Service Rating
40-AP
40-AR
40-AS
A
E
2
Inst.
Number of Contacts
Contact Size
7
3
4
3
0
15 25
16 12
4/0
12
17
25
1
E
16
2
18
P
F
A
B
B
15
12
3
26 27 28 29
30 31 32 33
35 36 37 38
40 41 42 43
24
19
N
G
A
14
13
4
D
34
23
39
20
5
C
M
H
6
22
21
C
11
7
L
J
K
10
8
9
Insert Arrangement
Service Rating
40-AT
A
40-AU
40-AV
D
A
10
8
Number of Contacts
Contact Size
24 18
12 16
1
8
3
4
1
3
16
2/0
CONTACT LEGEND
16
12
8
4
0
2/0
4/0
53
AC Series - Thermocouple
contact availability
AA ccoommpplleettee lliinnee ooff ccyylliinnddrriiccaall ccoonnnneeccttoorrss ccoonnttaaiinniinngg tthheerr--
mocouple insert arrangements is available. The contact
llayoutfora particular arrangementwill be foundin either
the MS/Standard contact arrangement section, pages
32-53,or the Special contact arrangementsection,pages
54-58. All thermocouple contact layouts may contain
either iron, alumel, chromel, constantan, standard (cop-
per) or brass (dummy) contacts. See the thermocouple
tabulationsonthefollowingpages.
The following abbreviations are used in the contact mate-
rial column in the charts that follow. Also, thermocouple
contacts are color coded as shown. (This identification is
made by means of small dots of stain on the solder well
end of the contact).
Abbreviation
Material
Iron
Color Code
Black
Ir.
Con.
Cu.
Constantan
Copper Alloy
Chromel
Alumel
Yellow
N/A
Ch.
White
Green
N/A
Al.
Dummy
Brass
WIRE WELL DATA
Well Inside Dia.
Well Depth
+.031
Solder Well
Barrel
Outside Dia.
Contact
Size
+.004
–.002
–.000
12
16
.125
.094
.250
.188
.166 ±.003
+.002
.125
–.004
RECOMMENDED WIRE
Use wire in accordance
I Chromel - Alumel
with MIL-W-5848
Use wire in accordance
with MIL-W-5845
II Iron - Constantan
54
AC Series - Thermocouple
contact arrangements
Contact
Size
Pin
Insert
Rotation
C W
Shell
Size
and Arrg.
Similar
to
MS Arrg.
Total
Contacts
Contact Material
12
16
10SL-51
10SL-52
10SL-53
10SL-54
10SL-55
10SL-56
10SL-57
10SL-58
10SL-59
10SL-60
10SL-61
10SL-62
10SL-63
10SL-64
10SL-4
10SL-4
10SL-4
10SL-3
10SL-3
10SL-4
10SL-4
10SL-3
10SL-4
10SL-4
10SL-4
10SL-3
10SL-3
10SL-3
2
2
2
3
3
2
2
3
2
2
2
3
3
3
2
2
2
3
3
2
2
3
2
2
2
3
3
3
45°
A = Ir.; B = Con.
45°
A = Cu.; B = Con.
A = Al.; B = Ch.
45°
None
None
None
None
None
None
None
None
None
None
None
A = Ir.; B = Con.; C = Cu.
A = Al.; B = Ch.; C = Cu.
A = Al.; B = Ch.
A = Ch.; B = Con.
A = Ch.; B = Al.; C = Cu.
A = Ch.; B = Al.
A = Ir.; B = Con.
A = Cu.; B = Con.
A = Cu.; B = Al.; C = Ir.
A, C = Con.; B = Ch.
A, C = Ch.; B = Al.
12S-51
12S-54
12S-55
12S-56
12S-57
12S-58
12S-59
12S-60
12S-61
12S-62
12S-3
12S-3
12S-3
12S-3
12S-3
12S-3
12S-3
12S-3
12S-3
12S-3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
315°
315°
45°
A = Ch.; B = Al.
A = Ir.; B = Con.
A = Cu.; B = Con.
A = Al.; B = Ch.
A = Ch.; B = Al.
A = Ir.; B = Con.
A = Ir.; B = Con.
A = Cu.; B = Con.
A = Ch.; B = Con.
A = Ch.; B = Al.
None
60°
120°
None
None
None
None
14S-51
14S-52
14S-53
14S-54
14S-55
14S-56
14S-57
14S-58
14S-59
14S-60
14S-61
14S-63
14S-64
14S-65
14S-67
14S-68
14S-69
14S-70
14S-71
14S-72
14S-73
14S-9
14S-2
14S-9
14S-6
14S-2
14S-2
14S-2
14S-7
14S-9
14S-9
14S-6
14S-6
14S-2
14S-6
14S-6
14S-2
14S-7
14S-2
14S-2
14S-9
14S-2
2
4
2
6
4
4
4
3
2
2
6
6
4
6
6
4
3
4
4
2
4
2
4
2
6
4
4
4
3
2
2
6
6
4
6
6
4
3
4
4
2
4
90°
45°
A = Al.; B = Ch.
A, B = Cu.; C = Al.; D = Ch.
A = Ir.; B = Con.
90°
45°
A, C, E = Ir.; B, D, F = Con.
A, C = Ir.; B, D = Con.
A = Ir.; B = Con.; C, D = Cu.
A, C = Al.; B, D = Ch.
A = Al.; B = Ch.; C = Cu.
A = Cu.; B = Con.
45°
45°
45°
45°
90°
None
45°
A = Al.; B = Ch.
A = Al.; B = Ch.; C = Ir.; D = Con.; E, F = Cu.
A, C = Al.; B, D = Ch.; E = Ir.; F = Con.
A, C = Con.; B, D = Cu.
None
None
None
None
45°
A, C., E = Cu.; B, D, F = Con.
A = Al.; B = Ch.; Balance = Cu.
A = Ch.; B = Con.; C, D = Cu.
A = Con.; B = Ch.; C = Cu.
A, D = Ch.; B, C = Al.
None
None
None
None
None
A, B, D = Cu.; C = Con.
A = Con.; B = Cu.
A, B = Cu.; C = Al.; D = Ch.
55
AC Series - Thermocouple
contact arrangements
Contact
Size
Pin
Insert
Rotation
C W
Shell
Size
and Arrg.
Similar
to
MS Arrg.
Total
Contacts
Contact Material
12
16
14S-74
14S-75
14S-76
14S-77
14S-78
14S-2
14S-2
14S-2
14S-2
14S-9
4
4
4
4
2
4
4
4
4
2
None
None
None
None
None
A, B = Ch.; C, D = Al.
A, B = Cu.; C, D = Con.
A, C = Al.; B, D = Ch.
A, D = Al.; B, C = Ch.
A = Ch.; B = Al.
16S-52
16S-54
16S-55
16S-4
16S-1
16S-1
2
7
7
2
7
7
None
None
None
A = Ch.; B = Al.
A = Al.; B = Ch.; Balance = Cu.
A = Con.; Balance = Cu.
16-52
16-53
16-55
16-56
16-57
16-58
16-60
16-62
16-11
16-9
2
4
3
2
3
3
2
2
2
2
3
2
3
3
2
2
90°
70°
A = Al.; B = Ch.
2
A = Al.; C = Ch.; B, D = Cu.
A = Al.; B = Ch.; C = Cu.
A = Con.; B = Cu.
16-10
16-13
16-10
16-10
16-13
16-11
45°
90°
None
None
None
None
A = Al.; B = Cu.; C = Ch.
A = Con.; B, C = Cu.
A = Al.; B = Ch.
A = Con.; B = Cu.
18-51
18-52
18-53
18-54
18-56
18-57
18-59
18-60
18-61
18-62
18-63
18-65
18-66
18-67
18-68
18-69
18-70
18-71
18-72
18-73
18-74
18-12
18-11
18-12
18-15
18-1
6
5
6
6
None
None
None
None
45°
A = Ir.; B, E = Con.; D = Cu.; C, F = Dummy
A = Ir.; B = Con.; C = Ch.; D = Al.; E = Dummy
A, D = Ir.; B, E = Con.; C, F = Dummy
A, C = Al.; B, D = Ch.
5
4
6
4
10
6
10
6
A, C, E, G, I = Ir.; B, D, F, H, J = Con.
A, C, E = Al.; B, D, F = Ch.
18-12
18-12
18-11
18-12
18-12
18-15
18-12
18-1
45°
6
6
45°
A, C = Ir.; B, E, F = Con.; D = Cu.
A, D = Al.; B, C, = Ch.; E = Cu.
A, C = Ir.; B, D = Con.; E = Ch.; F = Al.
A, B, C = Ir.; D, E, F = Con.
5
5
4
45°
6
6
6
None
None
None
None
None
None
None
None
None
None
None
None
None
6
4
A, C = Con.; B, D = Cu.
6
6
10
6
A = Ir.; B = Con.; Balance = Cu.
A, C, E, G, I = Cu.; B, D, F, H, J = Con.
A, C, E = Cu.; B, D, F = Con.
10
6
18-12
18-11
18-1
5
5
A, D = Al.; B, C = Ch.; E = Cu.
A = Al.; B = Ch.; Balance = Cu.
A = Ir.; B = Con.; C = Ch.; D = Al.; E = Cu.
A = Con.; Balance = Cu.
10
5
10
18-11
18-15
18-15
18-9
5
4
4
2
4
4
D = Con.; Balance = Cu.
7
5
6
A = Al.; D = Ch.; Balance = Cu.
A = Ch.; B = Al.; D = Ir.; E = Cu.; C, F = Con.
18-12
6
20-52
20-56
20-60
20-61
20-62
20-64
20-4
4
8
4
7
315°
45°
A = Ir.; B = Con.; C = Ch.; D = Al.
A, B, G, H = Ir.; C, D, E, F = Con.
D = Ch.; E = Al.; Balance = Cu.
A, B, M = Cu.; Balance = Con.
A, C, E = Al.; B, D, F = Ch.; G = Cu.
A = Al.; C = Ch.; Balance = Cu.
20-7
8
8
20-7
8
45°
20-29
20-15
20-27
17
7
17
45°
80°
14
14
None
56
AC Series - Thermocouple
contact arrangements
Contact
Size
Pin
Insert
Rotation
C W
Shell
Size
and Arrg.
Similar
to
MS Arrg.
Total
Contacts
Contact Material
12
16
20-65
20-67
20-68
20-69
20-70
20-71
20-74
20-75
20-77
20-80
20-81
20-82
20-27
20-16
20-7
14
9
14
7
None
None
None
None
None
None
None
None
None
None
None
None
A, B, C, D, E, F, G = Ir.; H, I, J, K, L, M, N = Con.
H = Al.; I = Ch.; Balance = Cu.
2
8
8
A, B, G, H = Con.; C, D, E, F = Cu.
20-27
20-29
20-29
20-29
20-15
20-16
20-27
20-27
20-29
14
17
17
17
7
14
17
17
17
A, B, C, D, E, F, G = Cu.; H, I, J, K, L, M, N = Con.
A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S = Con.
S = Al.; R = Ch.; Balance = Cu.
A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T = Cu.
G = Al.; Balance = Ch.
7
2
9
7
14
14
17
A = Con.; Balance = Std.
14
14
17
A, C, E, G, I, K, M = Cu.; B, D, F, H, J, L, N = Con.
A, C, E, G, I, K, M = Ch.; B, D, F, H, J, L, N = Al.
A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; T = Cu.
22-36
22-57
22-60
22-62
22-68
22-69
22-71
22-72
22-73
22-74
22-75
22-76
22-77
22-78
22-79
22-23
22-14
22-14
22-23
22-19
22-19
22-14
22-5
8
19
19
8
8
8
347°
45°
A, C, E, G = Ir.; B, D, F, H = Con.
19
19
A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T, U, V = Cu.
U = Al.; N = Ch.; Balance = Cu.
45°
60°
A, B, F, G = Al.; C, D, E, H = Ch.
14
14
19
6
14
14
19
4
45°
A, C, E, G, J, L, M = Ir.; B, D, F, H, K, P, N = Con.
A, C, E, G, J, L, M = Cu.; B, D, F, H, K, P, N = Con.
V = Al.; U = Ch.; Balance = Cu.
45°
None
None
None
None
None
None
None
None
None
2
2
8
8
B = Al.; E = Ch.; Balance = Cu.
22-5
6
4
E = Al.; B = Ch.; Balance = Cu.
22-23
22-23
8
A, C, E, G = Ir.; B, D, F, H = Con.
8
A = Al.; B, D, G, H = Cu.; C = Ch.; E = Ir.; F = Con.
W = Con.; Balance = Cu.
21
14
19
4
21
14
19
4
22-19
22-14
22-10
B, D, F, H, J, K, M, P = Cu.; A, E, L = Ir.; C, G, N = Con.
A, C, E, G, H, K, M, P, R, T = Con.; Balance = Cu.
A, C, = Con.; B, D = Cu.
24-56
24-57
24-62
24-20
24-28
24-28
11
24
24
2
9
24
24
45°
45°
E = Al.; F = Ch.; Balance = Cu.
A, C, J, V, Y, W, K, E, H, U, S, M = Ch.; Balance = Al.
A, C, E, G = Ir.; B, D, F, H = Con.; R, T = Ch.; S, U = Al.; Balance = Cu.
None
A, C, E, G, J, L, K, N, S, U, W, Y = Cu.; B, D, F, H, Q, R, M, P, T, V, X, Z =
Con.
24-63
24-28
24
24
None
24-64
24-68
24-81
24-5
24-28
24-7
16
24
16
16
24
14
None
None
None
A, B, C, D, E, F, G, H = Ir.; J, K, L, M, N, P, R, S = Con.
D = Con.; Balance = Cu.
2
A, C, E, G, I, K, M, N, P = Cu.; B, D, F, H, J, L, O = Con.
28-53
28-58
28-61
28-63
28-11
28-20
28-21
28-20
22
14
37
14
4
18
4
45°
45°
45°
45°
J, L = Al.; K, M = Ch.; Balance = Cu.
10
A, C, E, G, K, M = Al.; B, D, F, H, L, N = Ch.; J, P = Cu.
A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N, d = Ir.; Balance = Con.
A, C, E, G, J = Al.; B, D, F, H, P = Ch.; Balance = Cu.
37
4
10
A, d = Al.; B, j = Ch.; C, D, E, F, G, N, P, R, S, H, J, K, L, M, W, X, Y, Z = Con.;
Balance = Cu.
28-64
28-65
28-15
28-12
35
26
35
26
None
None
A, C, E, G, J, L, N, R, T, V = Ir.; X, Z = Al.; B, D, F, H, K, M, P, S, U, W = Con.;
Y, a = Ch.; b, d = Cu.
28-67
28-68
28-16
28-15
20
35
20
35
None
45°
U = Con.; Balance = Cu.
T = Al.; U = Ch.; Balance = Cu.
57
AC Series - Thermocouple
contact arrangements
Contact
Size
Pin Insert
Rotation
C W
Shell Size Similar to
Total
Contact Material
G = Al.; R = Ch.; Balance = Cu.
and Arrg.
MS Arrg.
Contacts
12
4
16
18
18
18
28-69
28-70
28-77
28-11
28-11
28-11
22
22
22
None
None
None
4
A = Al.; B = Ch.; Balance = Cu.
J = Con.; Balance = Cu.
4
A, D, S, Z, n, s = Ir.; B, J, K, f, g, r = Con.; G, L, P, b, e, j = Al.; F, H, T, X, h, k =
Ch.; Balance = Cu.
28-81
28-21
37
37
None
32-51
32-55
32-8
32-8
30
30
6
6
24
24
90°
M = Ch.; N = Al.; Balance = Cu.
125°
M, N = Ch.; O, P = Al.; Balance = Cu.
36-53
36-7
47
7
1
40
45°
u, v, w = Al.; x, y, z = Ch.; Balance = Cu.
A, C, E, G, L, J, H, P, R, T, V, X Z, b, d, f, h, k, q, n, m, u, w, y = Con.;
Balance = Cu.
36-56
36-10
48
48
None
36-57
36-58
36-61
36-62
36-82
36-8
47
35
35
48
52
46
35
35
48
52
None
None
None
None
None
W = Al.; f = Ch. Balance = Cu.
36-15
36-15
36-10
36-52*
H = Al.; G = Ch.; Balance = Cu.
A, C, E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j, c = Con.; Balance = Cu.
A, C, E, = Al.; B, D, F = Ch.; Balance = Cu.
v, g = Ir.; p, y, c = Con. x = Ch.; Balance = Cu.
A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF, AJ, AL,
AN, AP, AS, AU, AW, AY, BA, BC, BE, BH, BK, BM, BP, BS, BU = Ir.; Balance
= Con.
40-58
40-56*
85
85
None
40-59
40-77
40-56*
40-53*
85
60
85
60
None
None
B = Ch.; C = Con.; Balance = Cu.
55, 60 = Ir.; 57, 58, 59 = Con.; 56 = Ch.; Balance = Cu.
50, 51 = Ir.; 27, 28, 29, 31, 32, 34, 36, 37 = Con.; 25, 39, 40, 41 = Al.;
43, 44, 45, 46, 47, 48, 49, 52, 53, 54 = Ch.; Balance = Cu.
40-78
40-53*
60
60
None
44-57
44-52
104
104
None
A, C, E, G, J, L, etc. = Cu.; B, D, F, H, K, M, etc. = Con.
* Amphenol arrangement
58
AC Series
how to order
To more easily illustrate ordering procedure, part number
ACCL06AF18-1SX(025) is shown as follows:
AC
C
L
06
AF
18–1
S
X
(025)
1
2
3
4
5
6
7
8
9
1.
2.
AC designates Amphenol Industrial Series Threaded Connectors
C
S
designates Crimp Contacts
designates Solder Contacts
3.
4.
L
designates low smoke zero halogen inserts and grommets
Omit for standard resilient inserts and grommets.
Shell Style
00 - Wall Mounting Receptacle
01 - Line Receptacle
02 - Box Mounting Receptacle
05 - Straight Plug
06 - Straight Plug with hardware
08 - 90 degree Plug
5.
Class
A or AF - General duty connector
E or F - Environmental connector for a wire bundle
PGA or
PGR - Environmental connector for jacketed cable
6.
7.
Shell size and insert arrangement
See insert availability on pages 25-27
Contact type
P - Pin contacts
S - Socket contacts
R - RADSOK® crimp socket contacts (see page 31)
Ask for Brochure SL-391 for Amphe-Power Connectors with RADSOK Technology.
8.
9.
Alternate insert rotation
“W”, “X”, “Y”, “Z” designates that the insert is rotated in its shell from a normal
position. No letter required for normal (no rotation) position.
See page 28 for availability.
Variations
RoHS Compliant
(072) - Gray zinc nickel finish
(023) - Electroless nickel finish
(025) - Black zinc alloy finish
(G96) - Black hard-coat anodize
(B30) - Gold plated contacts
(116) - Non-pre-tinned solder contactsꢀ
For further RoHS Compliant
support, contact Amphenol Industrial
Operations or call 1-866-315-8559.
ꢀ
(472) - Black zinc alloy finish and solder contacts
less pre-filled cup
✓ꢀ
✓
(548) - Electroless nickel finish and solder contacts
less pre-filled cup
(724) - Gray zinc nickel finish and solder contacts
less pre-filled cup
✓
59
MS/Standard
how to order
SAE AS50151 (Solder Contacts)
MS 3102
A
18 – 3
P
W
1
2
3
4
5
6
7
1.Connector Type
MS designates Military Standard
2. Connector Style
3100 wall mounting receptacle
3101 cable connecting receptacle
3102 box mounting receptacle
3106 straight plug
3108 90° plug
3. Service Class
A solid shell for general, non-environmental applications
C solid shell for pressurized applications (MS3102 only)
E environmental resisting
F environmental resisting with strain relief
R lightweight environmental resisting
4., 5. Shell size and insert arrangement - see tables, pages 25-27.
6. Contact Types
P designates pin contact
S designates socket contact
7. Insert Rotation
“W”, “X”, “Y”, or “Z” designate that insert is rotated in its shell from
normal position. No letter required for normal (no rotation) position.
60
AC Series/MS – accessories
10-40450, 10-36675 sealing gaskets,
10-405996 sealing plugs, sealing ranges
SEALING GASKETS
TheAmphenolplain flat gasket of synthetic rubber mate-
.031 .010
C
PLAIN
rial is provided to take complete advantage of waterproof
and pressure sealing features. It is for use with the flange
mounted receptacle.
A
.020 .00ꢀ
SHIELDING
This flat gasket is provided to give the maximum in con-
nector performance. Its special feature is in providing
the maximum radio shielding under difficult conditions
of high receiver sensitivity and low signal strength
while retaining the sealing characteristics of the plain
gasket. This gasket is for use with the flange mounting
A
C
This gasket is provided for applications where the
major requirement is resistance to the injurious effects
of extremely low temperature. Even at temperatures
as low as –67°F this gasket retains its resiliency and
will seal a pressure differential of 30 psi.
D
.031 .010 LꢁW
TEMPERATURE
B
ꢀ HꢁLES
Installation Dimensions
Order Data
MS
Shell
Size
Inches
Millimeters
A
B
C
D
A
± .25
B
C
D
± .25
Plain
Shielding
Low
Temperature
Style
± .010 + .016 + .016 ± .010
+.41
– .00
+.41
– .00
- .000
- .000
8S
.594
.719
.500
.875
.172
.172
.172
.172
.172
.172
.172
.172
.172
.203
.203
.203
.203
.203
.219
.219
.219
15.09
18.26
18.26
20.65
20.65
23.01
23.01
24.61
24.61
27.00
29.36
31.75
34.92
39.70
44.45
49.23
55.58
12.70 22.22
15.88 25.40
15.88 25.40
19.05 27.79
19.05 27.79
22.22 30.18
22.22 30.18
25.40 32.54
25.40 32.54
28.57 34.92
31.75 38.10
34.92 41.27
38.10 44.45
44.45 50.80
50.80 57.15
55.58 63.50
61.93 69.85
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.37
5.16
5.16
5.16
5.16
5.16
5.56
5.56
5.56
10-40450-8
10-40450-8S
10-36675-8
10S
10SL
12S
12
.625
1.000
1.000
1.094
1.094
1.188
1.188
1.281
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
10-40450-10
10-40450-10
10-40450-12
10-40450-12
10-40450-14
10-40450-14
10-40450-16
10-40450-16
10-40450-18
10-40450-20
10-40450-22
10-40450-24
10-40450-28
10-40450-32
10-40450-36
10-40450-40
10-40450-10S 10-36675-10
10-40450-10S 10-36675-10
10-40450-12S 10-36675-12
10-40450-12S 10-36675-12
10-40450-14S 10-36675-14
10-40450-14S 10-36675-14
10-40450-16S 10-36675-16
10-40450-16S 10-36675-16
10-40450-18S 10-36675-18
10-40450-20S 10-36675-20
10-40450-22S 10-36675-22
10-40450-24S 10-36675-24
10-40450-28S 10-36675-28
10-40450-32S 10-36675-32
10-40450-36S 10-36675-36
10-40450-40S 10-36675-40
.719
.625
.813
.750
.813
.750
14S
14
.906
.875
.906
.875
16S
16
.969
1.000
1.000
1.125
1.250
1.375
1.500
1.750
2.000
2.188
2.438
.969
18
1.063
1.156
1.250
1.375
1.563
1.750
1.938
2.188
20
22
24
28
32
36
40
SEALING PLUG 10-405996-XX1
Inches
B
Millimeters
A Dia.
± .005 ± .010 ± 0.2 ± 0.1 ± 0.2
Contact Wire Color
A Dia
± .010
C
B
C
Sealing plugs are used to fill unused holes in multi-holed
grommet configurations.
Order No.
Size
16
12
8
Size
Code
10-405996-161
10-405996-121
10-405996-081
10-405996-041
10-405996-001
20-16 Blue
.083
.121
.185
.310
.440
.133
.171
.315
.415
.605
.564** 2.1
.564** 3.1
3.4 14.3***
4.3 14.3***
8.0 11.9
14-12 Yellow
B
C
DIA
10-8
4-6
White
Blue
.470
.470
4.7
7.9
4
10.5 11.9
15.4 25.4
.135 +.030
–.025
0
0-2
Yellow
1.000
11.2
** ± .020
*** ± 0.5 mm
A
GROMMET HOLE SEALING RANGE
DIA
Hole
Size
16
12
8
Sealing Range
Millimeters
Inches
45˚
2.3 – 3.0
3.2 – 4.5
3.8 – 6.5
7.1 – 9.3
10.0 – 13.7
.090 – .118
.126 – .177
.150 – .256
.279 – .366
.394 – .539
All dimensions for reference only.
4
0
61
AC Series/MS Accessories
MS3057-A style cable clamp,
MS3420 sleeve
The MS3057-A style cable clamp was designed for use with jacketed cable or
wires protected by tubing. Both clamping halves float for maximum strain relief.
For unjacketed cable or wires, use corresponding MS3420 sleeve. To order
clamp with sleeve, add -1 to the 97 - number. Two telescoping sleeves are fur-
nished with shells sizes 24 and larger.
V Thread
B
C
A
C
Dia.
Min.
Shell
Size
Amphenol
Number
A
±.031
B
Max.
V
Thread
10SL, 12S
14,14S
16,16S
18
97-3057-1004
97-3057-1007
97-3057-1008
97-3057-1010
97-3057-1012
97-3057-1016
97-3057-1020
97-3057-1024
.795
.850
.842
.3125
.4375
.5625
.6250
.7500
.9375
1.2500
1.3750
.6250-24
.7500-20
.995
1.120
1.216
1.403
1.683
2.050
2.245
.920
.8750-20
.920
1.0000-20
1.1875-18
1.4375-18
1.7500-18
2.0000-18
20, 22
24, 28
32
.927
1.015
1.095
1.156
36
Sleeve
MS
Part No.
Amphenol
Number
A
±.005
B
±.005
C
±.010
D
±.031
3420-3
9779-513-3
9779-513-4
9779-513-6
9779-513-8
9779-513-10
9779-513-12
9779-513-16
9779-513-20
9779-513-24
.130
.220
.312
.437
.562
.625
.750
.937
1.250
.210
.302
.427
.552
.615
.740
.927
1.240
1.365
.374
.500
2.875
2.750
2.625
2.500
2.375
2.250
2.125
2.000
1.875
3420-4
A
D
3420-6
.614
3420-8
.739
3420-10
3420-12
3420-16
3420-20
3420-24
.889
C
B
1.084
1.309
1.592
1.842
62
AC Series/MS Accessories
protection caps – plug
PLUG PROTECTION CAP 10-329391-XX*
A
B Dia.
+.010
–.000
Assembly
Number
Thread
Class 2A
C
L
Max.
Approx.
L
B
10-329391-10
10-329391-11
10-329391-12
10-329391-14
10-329391-16
10-329391-18
10-329391-20
10-329391-22
10-329391-24
10-329391-28
10-329391-32
10-329391-36
10-329391-40
10-329391-44
.625-24UNEF
.625-24UNEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.500-18UNEF
1.750-18UNS
2.000-18UNS
2.250-16UN
.516
.641
.641
.766
.891
1.016
1.141
1.266
1.391
1.641
1.891
2.078
2.328
2.641
3.5
3.5
3.5
3.5
3.5
3.5
4.0
4.0
4.5
4.5
5.0
5.0
5.0
6.0
1.312
1.312
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
A THD
C
2.500-16UN
2.750-16UN
PLUG PROTECTION CAP 10-229125-XX*
A
Assembly
Number
Thread
Class 2A
C
D
Ref.
L
Max.
Approx.
L
10-229125-10
10-229125-12
10-229125-14
10-229125-16
10-229125-18
10-229125-20
10-229125-22
10-229125-24
10-229125-28
10-229125-32
10-229125-36
10-229125-40
.625-24NEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18NEF
1.250-18NEF
1.375-18NEF
1.500-18NEF
1.750-18NS
2.000-18NS
2.250-16UN
2.500-16UN
3.0
3.5
3.5
3.5
3.5
3.5
3.5
4.5
4.5
5.0
5.0
5.0
.140
.140
.140
.140
.140
.193
.193
.193
.193
.193
.193
.193
1.233
1.421
1.421
1.421
1.421
1.421
1.421
1.421
1.421
1.421
1.421
1.421
A THD
D
C
PLUG PROTECTION CAP MS25042-XXDA*
A
B Dia.
+.010
–.005
MS
Number
Thread
Class 2A
C
L
Max.
Approx.
L
MS25042-8DA
MS25042-10DA
MS25042-12DA
MS25042-14DA
MS25042-16DA
MS25042-18DA
MS25042-20DA
MS25042-22DA
MS25042-24DA
MS25042-28DA
MS25042-32DA
MS25042-36DA
MS25042-40DA
.500-28UNEF
.625-24UNEF
.750-20UNEF
.875-20UNEF
1.000-20UNEF
1.125-18UNEF
1.250-18UNEF
1.375-18UNEF
1.500-18UNEF
1.750-18UNS
2.000-18UNS
2.250-16UN
.156
.156
.156
.156
.156
.156
.187
.187
.187
.187
.218
.218
.218
4.00
4.00
4.50
4.50
4.50
4.50
5.00
5.00
5.50
7.75
7.75
7.75
7.75
.969
.969
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
A THD
C
2.500-16UN
*
Protective caps are illustrated with sash chains and are available with beaded
chains or without chains. Optional terminations are also available. Consult
Amphenol, Sidney, NY when ordering.
D
63
AC Series/MS Accessories
protection caps – receptacle
RECEPTACLE PROTECTION CAP 10-329392-XX*
A
B
Dia.
Min.
D
Dia.
Max.
Assembly
Number
Thread
Class 2B
C
L
Max.
Approx.
L
B
10-329392-10
10-329392-12
10-329392-14
.625-24UNEF
.750-20UNEF
.875-20UNEF
.516
.641
.766
.891
3.5
3.5
3.5
3.5
3.5
4.0
4.0
4.5
4.5
5.0
5.0
5.0
6.0
.875
1.000
1.125
1.250
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.656
2.938
.793
.793
.793
A THD
10-329392-16 1.000-20UNEF
.793
10-329392-18 1.125-18UNEF 1.016
10-329392-20 1.250-18UNEF 1.141
10-329392-22 1.375-18UNEF 1.266
10-329392-24 1.500-18UNEF 1.391
10-329392-28 1.750-18UNS
10-329392-32 2.000-18UNS
10-329392-36 2.250-16UN
10-329392-40 2.500-16UN
10-329392-44 2.750-16UN
1.024
1.024
1.024
1.024
1.024
1.024
1.024
1.024
1.024
D
1.641
1.891
2.078
2.328
2.641
C
RECEPTACLE PROTECTION CAP 10-422905-XXX*
A
D
Dia.
Max.
Assembly
Number
Thread
Class 2B
B
Ref.
C
L
Max.
Approx.
L
10-422905-103 .625-24UNEF .140
10-422905-123 .750-20UNEF .140
10-422905-143 .875-20UNEF .140
10-422905-163 1.000-20UNEF .140
10-422905-183 1.125-18UNEF .193
10-422905-203 1.250-18UNEF .193
10-422905-223 1.375-18UNEF .193
10-422905-243 1.500-18UNEF .193
10-422905-283 1.750-18UNS
10-422905-323 2.000-18UNS
10-422905-363 2.250-16UN
10-422905-403 2.500-16UN
3.0
3.5
3.5
3.5
3.5
4.0
4.0
4.5
4.5
5.0
5.0
5.0
.875
1.000
1.125
1.250
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.656
.812
.812
.812
A THD
.812
B
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
D
.193
.193
.193
.193
C
RECEPTACLE PROTECTION CAP MS25043-XXDA*
A
B
+.010
–.005
D
Dia.
Max.
MS
Number
Thread
Class 2B
C
L
Max.
Approx.
L
MS25043-8DA
.500-28UNEF .140
4.00
4.00
4.50
4.50
4.50
4.50
5.00
5.00
5.50
7.75
7.75
7.75
7.75
.688
.815
.750
.750
.750
.750
.750
.750
.750
.750
.750
.812
.812
.812
.812
A THD
MS25043-10DA .625-24UNEF .140
MS25043-12DA .750-20UNEF .140
MS25043-14DA .875-20UNEF .140
MS25043-16DA 1.000-20UNEF .140
MS25043-18DA 1.125-18UNEF .140
MS25043-20DA 1.250-18UNEF .140
MS25043-22DA 1.375-18UNEF .140
MS25043-24DA 1.500-18UNEF .171
MS25043-28DA 1.750-18UNS
MS25043-32DA 2.000-18UNS
MS25043-36DA 2.250-16UN
MS25043-40DA 2.500-16UN
1.000
1.125
1.188
1.344
1.469
1.594
1.719
1.969
2.219
2.469
2.719
D
.171
.187
.187
.187
C
*
Protective caps are illustrated with sash chains and are available with beaded
chains or without chains. Optional terminations are also available. Consult
Amphenol, Sidney, NY when ordering.
B
Cap without chain - 10-130969
64
AC Series/MS
dust caps
10-70500 RECEPTACLE DUST CAP
for external threads
A Dia.
Nominal
Thread
C
Dia.
±.031
MS
Shell Size
Order
Number
L1
±.062
8S
10S
10SL
12S
12
10-70500-8
10-70500-10
10-70500-10
10-70500-12
10-70500-12
10-70500-14
10-70500-14
10-70500-16
10-70500-16
10-70500-18
10-70500-20
10-70500-22
10-70500-24
10-70500-28
10-70500-32
10-70500-36
10-70500-40
.500
.625
.750
.875
.500
.500
.500
.500
.500
.500
.500
.500
.500
.562
.562
.562
.562
.562
.562
.625
.625
.625
.875
.750
1.000
1.000
1.125
1.125
1.250
1.250
1.375
1.500
1.625
1.750
1.938
2.250
2.500
2.750
L1
C
.750
14S
14
.875
.875
16S
16
1.000
1.000
1.125
1.250
1.375
1.500
1.750
2.000
2.250
2.500
18
A
20
22
24
28
32
36
40
10-70506 PLUG DUST CAP
for internal threads
B
Dia.
Min.
MS
Shell Size
Order
Number
L2
±.125
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
.625
8S
10S
10SL
12S
12
10-70506-8S
10-70506-10S
10-70506-10S
10-70506-12
10-70506-12
10-70506-14
10-70506-14
10-70506-16
10-70506-16
10-70506-18
10-70506-20
10-70506-22
10-70506-24
10-70506-28
10-70506-32
10-70506-36
10-70506-40
.469
.587
.587
.704
.704
14S
14
16S
16
.828
.828
.953
B
.953
18
1.072
1.197
1.322
1.447
1.697
1.947
2.190
2.440
20
22
L2
24
28
32
36
40
65
AC Series/MS
application tools, torque values
When proprietary crimp contacts are employed rather than the standard MS approved solder
contacts, the following application tools are recommended for use. There is a possibility of
additional crimping tools other than those included being available at present or in the future
for this specific application.
Complete instructions for providing reliable crimped wire to contact terminations and inserting
proprietary crimp contacts in AC Series connectors are available in publication L-757.
TOOLING CHART
Crimping
Tool
Positioner/
Turret
Contact
Size
Contact
Style
Insertion
Tool
Removal
Tool
M22520/1-01
M22520/1-01
*
*
**
**
16
12
8
Pin & Socket
Pin & Socket
Pin & Socket
Pin & Socket
11-7345
11-7082
11-8220
11-7365-4 †
11-8250 Kit
11-8250 Kit
11-8250 Kit
Pin 11-7370-4 †
Socket 11-7674-2 †
Pin 11-7370-5 †
Socket 11-7674-3 †
**
**
4
**
**
0
Pin & Socket
11-7365-5 †
*
Use Daniels Turret TH29-1 or Astro Tool Co. Turret 616266
** For appropriate crimp tool and positioner refer to Pico Crimping Tool Co.
†
Tools used with Arbor Press 11-7364
RECOMMENDED TORQUE FORCES
CONNECTOR BACKSHELLS
Size
10SL
14S
16
16S
18
In./Lb. Max.
Size
22
24
28
32
36
40
In./Lb. Max.
85
26
44
50
50
55
65
90
114
120
153
20
170
66
Additional Products
reverse bayonet coupling
5015 type connectors
Amphenol has replaced the previously available
AC-B series with the ACA-B.
The ACA-B is a modification of the SAE AS50151 family
designed for commercial and industrial environments requiring
a rugged bayonet style connector, including heavy duty
power and signal applications. A comprehensive selection of
insert arrangements and accessory hardware are available to
accommodate heavy-duty, commercial wire and cable. The
rugged shell is made from aluminum alloy and plated with a
variety of finishes to meet any application.
Features of the ACA-B Reverse Bayonet series:
•
Quick positive coupling with audible and tactile indication
of full coupling.
•
•
•
•
Intermateable with existing VG95234 connectors
Rated 500 couplings minimum.
No lockwiring required
Inserts available in Neoprene material with alternate
materials available upon request.
Amphenol ACA-B Reverse Bayonet Connectors
•
•
•
•
Contacts available in gold and silver plating
Available in both crimp and solder terminations
Numerous finishes available, including cadmium free zinc alloy.
Rugged construction; aluminum or stainless steel components.
Ask for Amphenol catalog IC-4 for further information on
ACA-B Reverse Bayonet Connectors.
GT Reverse Bayonet Connectors
Amphenol GT Series of Connectors are heavy duty, rugged and
environmentally resistant, and are the preferred interconnect for the mass
transit industry. They are also used in power generation, petrochemical
industries and heavy equipment/geophysical marketplaces. GT connector
utilize SAE AS50151 and commercial inserts and are intermateable with
existing VG95234 connectors. Other features include:
•
reverse bayonet coupling - quick mating, audible, visual and tactile
full mating indicators.
•
•
•
UL recognized
rated to 2000 couplings min.
operating temperature range:
• with Neoprene inserts: –55°C to +125°C
• with Viton** inserts: –50°C to +200°C
• with low smoke/flame retardant inserts: –55°C to +125°C
available in both crimp and solder termination
rugged construction - aluminum or stainless steel components
numerous military and commercial finishes available including gray zinc
nickel (cadmium free)
resilient inserts provide high dielectric strength and moisture barrier.
IP67 performance in environmental versions
over 40 varieties of shell styles and backend accessory combinations
•
•
•
Amphenol® GT Reverse Bayonet Connectors
Amphe-Power GT Connectors are also available
that incorporate RADSOK socket contacts. See
page 31 for advantages and features of RADSOK
contacts for high amperage capability.
•
•
Ask for Amphenol catalog IC-4 for further information on
GT Series Connectors.
67
AC Series/MS Alternate Designs
TM
Amphe-Power 5015 Connectors
Amphenol offers the AC threaded series derived from the 5015 family
®
that can be enhanced with high amperage RADSOK contacts.
Design characteristics of the Amphe-Power 5015 connectors are:
•
•
The RADSOK contact handles 50% to 150% higher amperages than
standard contacts
The RADSOK contact has a twisted hyperbolic, stamped grid config-
uration within the socket. This design ensures a large, coaxial, face-
to-face surface area engagement.As male pin is inserted, axial mem-
bers in the female half deflect, imparting high current flow across the
connection with minimal voltage loss.
•
Contact arrangements have RADSOK sockets in sizes 0, 4, 8 and 12
with standard contacts in size 16.
The contacts available in RADSOK and the amperages are
Amphe-Power® 5015 Connectors
as follows:
(AC Threaded 5015 type connectors with RADSOK® high
amperage contacts)
•
•
•
•
•
Size 12 AWG can handle currents up to 35 amps.
Size 8 AWG can handle currents up to 70 amps.
Size 4 AWG can handle currents up to 120 amps.
Size0AWGcanhandle currentsupto250amps.
ACthreaded5015stylesinclude:solid shell for general,
non-environmental applications; pressurized style for use
on pressurized bulkheads or pressure barriers;
environmental resisting style with strain relief; lighter
weight and shorter environmental resisting style
The RADSOK design - socket
cylinder within female contact
has twisted hyperbolic grid.
For more information ask for Amphenol brochure SL-391,
Amphe-Power Connectors with RADSOK technology.
Provides higher amperage capa-
bilities with low insertion force
and low temperature rise.
5015 Connectors with PCB Contacts
Box mount receptacle 5015 type connectors can be supplied
with PCB tails for mounting to a printed circuit board.
Consult Amphenol Industrial for part numbering.
68
AMPHENOL CORPORATION
Amphenol Industrial
Phone: 888-364-9011
191 Delaware Avenue
Sidney, NY 13838-1395
www.amphenol-industrial.com
Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed
to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products are made without
representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other
measures may not be required. Specifications are typical and may not apply to all connectors.
IC-5
HKA 1-2016
相关型号：
©2020 ICPDF网 联系我们和版权申明