MS3116F10-6S-LC_技术文档

®

Amphenol

PT Series

Miniature Cylindrical Connectors

12-070-18

www.amphenol-industrial.com

Amphenol^®97 Series Connectors are UL recognized and CSA recognized.

Table of Contents

Introduction, Amphenol Miniature Cylindrical

Page

If more information is needed concerning the

connectors covered in this publication, or if there

are special application needs, please contact:

®

General Information, Design Flexibility . . . . . . . . . . . . . . . . . . .1, 2

Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5

Alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Insert arrangement patterns. . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10

PT, SP, MS/PT Proprietary/MIL-DTL-26482, Series 1

Amphenol Corporation

Amphenol Industrial Operations

191 Delaware Avenue

Sidney, New York 13838-1395

Telephone: 888-364-9011

Fax: 520-397-7169

Bayonet Coupling, Solder Contacts

General Information, Speciﬁcations, Service Class . . . . . . . . . . . 11, 12

PT00 (MS3110), SP00 wall mounting receptacle . . . . . . . . . . . . . . 13

PT01 (MS3111) cable connecting receptacle . . . . . . . . . . . . . . . . 14

PT02 (MS3112) SP02 box mounting receptacle . . . . . . . . . . . . . . . 15

PT06 (MS3116) SP06 straight plug . . . . . . . . . . . . . . . . . . . . . 16

PT07 (MS3114) SP07 jam nut receptacle . . . . . . . . . . . . . . . . . . 17

PT08E, SP08E 90 degree plug . . . . . . . . . . . . . . . . . . . . . . . 18

PT Connectors with Printed Circuit Board Contacts -

Please go to the Amphenol websites to view,

download and save this catalog and most all of

Amphenol interconnection product literature.

www.amphenol-industrial.com

box mount receptacle, jam nut receptacle . . . . . . . . . . . . . . . . . . 19

PTB, SPB thru bulkhead receptacle . . . . . . . . . . . . . . . . . . . . . 20

General Information, Speciﬁcations - PT hermetic. . . . . . . . . . . . . . 21

PTIH (MS3113H) hermetic solder mounting receptacle . . . . . . . . . . . 22

PT02H hermetic box mounting receptacle. . . . . . . . . . . . . . . . . . 23

PT07H (MS3114H) hermetic jam nut receptacle. . . . . . . . . . . . . . . 24

PT, SP, MS/PT how to order . . . . . . . . . . . . . . . . . . . . . . . . . 25

PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-DTL-26482, Series 1

Some miniature connector styles are available

in RoHS Compliant versions. Please contact

Amphenol Industrial Operations for more

information.

Bayonet Coupling, Crimp Contacts

General Information, Speciﬁcations, Service Class . . . . . . . . . . . 26, 27

PT00SE (MS3120), SP00SE wall mounting receptacle . . . . . . . . . . . 28

MF00SE (MS3128) wall mounting receptacle . . . . . . . . . . . . . . . . 29

PT01SE (MS3121) SP01SE cable connecting receptacle. . . . . . . . . . 30

PT02SE (MS3122) SP02SE box mounting receptacle . . . . . . . . . . . 31

MF02SE (MS3127) box mounting receptacle . . . . . . . . . . . . . . . . 32

PT06SE (MS3126), SP06SE straight plug. . . . . . . . . . . . . . . . . . 33

PT07SE (MS3124) SP07SE jam nut receptacle . . . . . . . . . . . . . . . 34

PT08SE, SP08SE 90 degree plug . . . . . . . . . . . . . . . . . . . . . . 35

PT-SE, SP-SE, MS/PT-SE how to order . . . . . . . . . . . . . . . . . . . 36

Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-40

Glands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Application tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Contacts, Power and Thermocouple Crimp . . . . . . . . . . . . . . . . . . . . 43

Contacts, Shielded Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-48

Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Other Amphenol Miniature Cylindrical Connectors . . . . . . . . . . . . . . . . 50

Amphenol operates Quality Systems that are

certiﬁed to ISO9001: 2008 by third party registrars.

NOTE:

The connector products in this brochure were formerly

®

known as Bendix products. These products are now

®

manufactured and sold under the Amphenol brand

name. The name “Amphenol” will replace the name

“Bendix” on products and literature in the future.

NOTE:

The Miniature MIL-DTL-26482, Series 2 connectors

PTS-DR and MS/PTS-DR (formerly in this catalog) are

no longer supplied with these designations. Amphenol

now supplies the Amphenol^®/Matrix^®MIL-DTL-26482,

Series 2. (Military numbers include MS3470 - MS3472,

MS3474, - MS3476).

Proprietary/MIL-DTL-26482 Series 1 connectors covered in this

catalog are widely used in general duty and environmental

applications, both industrial and military.

Markets that use this family of connectors include:

• Instrumentation

• Monitoring Equipment

• Machine Tool, Factory Automation

• Communications

• Geophysical

• Industrial Controls and Robotics

• Oil and Petrochemical Industries

• Rail/Mass Transit

• Military/Aerospace

Amphenol^®Miniature Cylindrical Connectors

Proprietary/MIL-DTL-26482, Series 1

®

Amphenol Miniature Cylindrical connectors offer twice the number of contacts in just half the size of a Standard connector. These

miniature connectors, are available in several series, each with varying design characteristics and customer options to meet cost

considerations and provide maximum design ﬂexibility. There are two styles within the family that are MS approved and qualiﬁed to

MIL-DTL-26482, Series 1, and in addition there are several proprietary styles.

Common features of all styles:

• All are for general duty applications and environmental sealing is achieved with the grommet and clamp design.

• Operating temperature is from –55°C to +125°; Operating voltage to 1000 VAC (RMS) at sea level.

• Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and provide an

indeﬁnite shelf life.

• All have resilient inserts which provide high dielectric strength and moisture barrier.

• A variety of shell ﬁnishes (including non-cadmium) and a variety of backend accessories are available within the styles.

Bayonet Coupling with Solder Contact Termination

PT, MS/PT (solder)

Options

• MS and proprietary versions

• Factory installed solder contacts

• 3 point bayonet coupling and 5 key/keyway mating.

• Intermateable with all miniature series connectors.

• MS/PT meets MIL-DTL-26482 Series 1, service classes E, F and P.

• MS/PT is UL recognized.

• 7 shell styles with 60 insert patterns

• Hermetic seal (glass fusion)

receptacle styles available

• Pressurized thru bulkhead

receptacle style available

• Pre-installed coax solder contacts

are available

PT Solder

jam nut receptacle and

mated straight plug

• Printed circuit board contacts

are available

SP (solder)

• SP Series is a modiﬁcation of the PT with same features except a

wider ﬂange for back panel mounting

Bayonet Coupling with Crimp Contact Termination

PT Solder

wall mount receptacle

PT-SE, MS/PT-SE (crimp)

• MS and proprietary versions

• Crimp rear insertable/front release contact termination. (closed entry

socket insert prevents probe damage).

Options

• 6 shell styles with 47 insert patterns

• Coax and thermocouple contacts

are available

• 3 point bayonet coupling and 5 key/keyway mating.

• Intermateable with all miniature series connectors.

• MS/PT-SE meets MIL-DTL-26482 Series 1, service classes E, F, P.

SP-SE (crimp)

• Modiﬁcation of the PT-SE with wider ﬂange for back panel mounting

PT-SE Crimp

wall mount receptacle

and mated straight plug

1

Amphenol^®Miniature Cylindrical

design ﬂexibility

The large family of miniature proprietary and MS style connectors provides for

many optional features and designs. In addition to the choices of bayonet or

threaded shells, solder or crimp termination within the style variations, there are

additional options that are shown here.

Hermetics

Hermetically sealed receptacles have fused compression glass sealed

inserts which provide envionrmental moisture sealing. There are three

hermetic styles within the PT bayonet series.

Coaxial Contacts

Amphenol Miniature connectors can incorporate shielded coax

contacts. Size 8 and 12 crimp coax contacts are available in PT-SE,

SP-SE, MS/PT-SE. Factory installed size 8 and 12 solder type coax

contacts are available in PT, SP,MS/PT connectors. See coax contact

information pages at the end of this catalog.

PT Connector with Hermetic

Seal Insert and Coax Contacts

PT Connector with PC Tail

Contacts

Printed Circuit Board Tail Contacts

PT bayonet connectors in box mounting receptacle and jam nut receptacle styles are

available with printed circuit board contacts. Standard PCB tails for MIL-DTL-26482

connectors have gold plating, .0050 inches over nickel. See page 20 and call Amphenol

for further information.

Flex Circuitry

Flex termination assemblies for attaching cylindrical connectors to printed circuit boards

are available through the Amphenol division ACT, Advanced Circuit Technology. Flex can

be used with miniature 26482 connectors and it can be designed to meet speciﬁc length,

current carrying capacity and to ﬁt the precise geometric shape of the connector to board

package. Flex circuity plugs into a printed circuit board and creates a self-locking terminal

pad which eliminates the need for an additional interconnect to the PCB.

PT Connector with Flex

Filter Protection

Amphenol offers the FPT Series which combines the miniature PT series with an EMI

ﬁlter. Designed to provide EMI protection for sensitive circuits, each circuit is individually

ﬁltered within the connector, eliminating the need for costly and bulky exterior network

ﬁlters. Filter contacts are available in MF, HF, VHF, and UHF ranges and are

intermateable and intermountable with MIL-DTL-26482 connectors. For further

information see catalog 12-120, Amphenol EMI Filter Transient Protection Connectors.

PT Connector with EMI

Filter Protection

Overmolded Cable

Overmold seals and cables can be designed for almost any industrial application.

A variety of materials are available: neoprene, hypalon and others; and a variety of

lengths can be designed to meet customer speciﬁcations. Overmold seals to the rear of

the connector and to the cable jacket providing moisture sealing.

PT Connector with Overmolded Cable

2

Amphenol^®Miniature Cylindrical

connector selection guide

The accompanying chart is provided to assist the user in selecting

the appropriate type of miniature connector to meet the application

requirements. Further information can be found in speciﬁc sections

of this catalog.

Solder

Crimp

MS/

PT-SE PT-SE

CHARACTERISTICS

PT

MS/PT

SP

Intermateable†

Contacts

o

Solder

•

Crimp RI/FR

•

Contact Retention

System

Non-Removable

•

Removable

•

Coupling

Bayonet

•

Standard Finishes††

Olive Drab Cadmium (003)

Anodic Coated (005)

Resilient Dielectric (–55°C to +125°C)

•

Temperature Range

Wide Mounting Flange

Hermetic Seal

•

SHELL STYLE AVAILABILITY

Wall Mounting Receptacle “00”

Cable Connecting Receptacle “01” ***

Box Mounting Receptacle “02”

Straight Plug “06”

•

**•

•

*•

•

**•

•

Jam Nut Receptacle “07”

Thru-bulkhead Receptacle “TB”

Solder Mount Receptacle “I”

90° Plug “08”

*•

•

*•

•

*•

•

*•

•

RI/FR = Rear Insertion/Front Releasable

†

o intermates with o

†† Optional ﬁnishes available. See “how to order” sections.

Available in hermetic version

** Dual mounting holes

*

*** This connector style is sometimes referred to as a cable connecting “plug.”

It does, however, mate with either a straight or 90 degree plug.

3

Amphenol^®Miniature Cylindrical

insert availability

Solder Termination

Hermetic

Crimp Termination

Contact Size

Coax

MS/PT-SE

PT-SE

SP-SE

Insert

Arrangement MS/PT

PT

MS-PT

Total

Contacts

Service

Rating

PT

X

S

X

SP

X

S

X

20

1

16

12

8

6-1

X*

X

1

2

I

8-2

X

2

I

8-3

X

3

I

8-4

X

4

I

8-33

X

3

I

8-98

3

I

10-2

2

I

10-5

X*

X

5

6

I

10-6

X

6

I

10-70

10-98

12-3

1

Coax

X

X*

X

6

I

3

4

II

12-4

X*

X

4

I

12-8

X

8

I

12-10

12-14

12-98

14-2

10

14

10

2

10

I

14

10

I

2

II

14-4

X

4

2

I

14-5

X

5

II

14-8

8

6

8

I

14-12

14-15

14-18

14-19

14-22

14-71

14-91 HV

14-AA

16-8

X

12

15

18

19

5

4

1

I

X

14

18

19

1

I

X*

X

I

X

I

X*

4

I

P

S

X

4

3

1

I

X*

3

**

X

4

I

X

8

1

II

16-23

16-26

16-70

16-76†††

16-99

18-5

23

26

15

14

23

5

22

26

14

8

I

X

I

1

5

N/A

X*

X

1

***

I

X

21

2

X*

5

8

II

I

18-8

8

18-11

18-30

X

11

30

11

II

I

X*

29

1

*Not available in MS version

**Flashover voltage 5,000 VAC (RMS)

***1500 VAC (RMS)

P designates Pin insert only.

†Size 12 contacts for #10 wire

††Not presently tooled

S designates Socket insert only.

†††Contacts must be ordered separately

4

Amphenol^®Miniature Cylindrical

insert availability, cont.

Solder Termination

Hermetic

Crimp Termination

Contact Size

Coax

MS/PT-SE

PT-SE

SP-SE

Insert

Arrangement MS/PT

PT

MS-PT

Total

Contacts

Service

Rating

PT

SP

20

32

16

12

8

18-32

18-71

18-72

18-75

18-76

18-80

18-91 HV

20-16

20-24

20-25

20-26

20-27

20-39

20-41

20-70

20-90 HV

22-7

X

32

9

I

X*

8

1

Coax, II

X

14

4

10

4

N/A

4

1

2

Coax

4

3

II

X

8

6

Coax, I

X*

X

6

**

X

16

24

25

26

27

39

41

14

7

16

II

24

25

20

27

37

41

10

7

I

6

I

X

I

X

2

I

4

Coax

X

Hi-Voltage

X*

X

7

Coax

22-21

22-25

22-32

22-34

22-36

22-41

22-55

22-70

22-71

22-72

22-78†††

22-96

24-31

24-51

24-61

24-71

24-79

X

21

25

32

34

36

41

55

19

9

21

25

II

X*

X

I

X

32

I

34

36

27

55

13

2

I

X

14

I

6

7

3

7

I, Coax

X

19

7

12

4

31

2

N/A

X*

Coax

7

7†

II

31

51

61

49

6

I

X*

X

47

61

45

1

4

I

X

2

5

N/A

Coax

*Not available in MS version

**Flashover voltage 5,000 VAC (RMS)

***1500 VAC (RMS)

†Size 12 contacts for #10 wire

††Not presently tooled

†††Contacts must be ordered separately

5

Amphenol^®Miniature Cylindrical

alternate positioning

Alternate Positioning

To avoid cross-plugging problems in applications requiring

the use of more than one miniature cylindrical connector of

the same size and arrangement, alternate insert rotations

are available as indicated in the accompanying chart.

Position W

Position X

Position Y

Position Z

As shown in the diagram at right, the front face of the pin

insert is rotated within the shell in a clockwise direction from

the normal shell key. The socket insert would be rotated

counterclockwise the same number of degrees in respect to

the normal shell key.

Views looking into front face of pin insert or rear of socket insert.

Insert Rotation

Degrees

Insert Rotation

Degrees

Shell

Size

Insert

Arrangement

Shell

Size

Insert

Arrangement

W

–

X

–

Y

–

Z

–

W

62

180

85

18

53

45

–

X

Y

Z

6

8

6-1

18

20

22

24

18-11*

18-30*

18-32*

18-71

18-72

18-75

18-76

18-80

18-91HV

20-16*

20-24

20-25

20-26

20-27

20-39*

20-41*

20-70

20-90

22-7

119

193

138

108

102

–

241

285

222

127

213

–

340

350

265

215

293

–

8-2*

58

60

45

90

–

122

210

97

–

8

8-3

–

8

8-4*

184

–

8

8-33*

8-98

–

8

–

10

12

14

16

18

10-2

45

90

–

90

151

–

315

180

–

10-5*

10-6*

10-70

10-98*

12-3*

12-4*

12-8

270

–

45

90

238

70

72

13

72

63

45

63

45

19

16

60

72

62

72

39

30

33

42

19

90

22

90

39

–

90

135

240

333

215

216

210

216

252

225

222

225

–

160

270

347

290

288

322

288

333

–

180

318

145

144

107

144

126

135

41

–

90

–

180

–

240

180

–

270

–

38

90

60

–

112

155

–

203

270

–

292

295

–

12-10*

12-14

12-98*

14-2

61

58

45

40

48

43

17

15

30

45

–

135

122

–

189

–

340

–

335

315

–

14-4*

14-5*

14-8

–

92

162

90

110

90

165

–

184

189

–

273

312

–

22-21*

22-25

22-32

22-34

22-36

22-41

22-55*

22-70

22-71

22-72

22-78

22-96*

24-31

24-51

24-61*

24-71

24-79

135

125

145

142

144

135

142

82

175

211

215

218

216

264

226

218

236

277

–

349

336

288

298

288

–

14-12*

14-15*

14-18*

14-19*

14-22

14-71

14-91HV

14-AA*

16-8*

16-23

16-26*

16-70

16-76

16-99*

18-5

155

180

315

–

234

270

–

314

312

270

339

–

60

–

191

200

41

45

54

158

60

41

–

152

270

–

180

–

331

–

41

–

275

216

–

338

286

–

225

171

180

131

–

255

313

270

205

–

122

–

324

281

–

66

55

180

156

97

–

223

263

–

340

315

–

18-8

* Available in Hermetic Class

6

Amphenol^®Miniature Cylindrical

insert arrangements

front face of pin inserts illustrated

D

C

A

B

A

B

A

C

A

C

B

A

B

Insert Arrangement

Service Rating

6-1

I

8-2

I

8-3

I

8-4

I

8-33

8-98

10-2

I

Number of Contacts

Contact Size

1

2

3

4

3

2

20

16

A

G

A

F

E

A

F

B

E

B

C

A

B

H

D

E

D

B

D

B

C

E

C

D

C

D

C

B

Insert Arrangement

Service Rating

10-5

10-6

10-70

Coax

1

10-98

12-3

II

12-4

12-8

I

Number of Contacts

Contact Size

5

6

3

4

8

20

8 Coax

20

16

20

A

E

B

A

C

H

B

A

H

F

B

D

A

F

H

B

E

B

E

D

C

A

B

G

K

J

C

L

G

C

D

M

G

C

K

J

K

D

C

J

R

F

D

F

D

E

N

E

P

Insert Arrangement

Service Rating

12-10

I

12-14

I

12-98

I

14-2

II

14-4

14-5

II

14-8

I

Number of Contacts

Contact Size

10

14

10

2

4

5

6

2

20

12

16

20 12

A

L

M

A

E

H

E

A

D

L

M

A

N

A

B

K

R

L

N

V

J

P

M

K

H

B

G

B

K

C

D

J

B

U

T

U

F

K

N

J

T

P

C

R

M

F

C

S

R

D

H

D

P

F

D

J

S

C

B

L

E

G

E

H

G

E

D

C

G

F

Insert Arrangement

Service Rating

14-12

I

14-15

I

14-18

I

14-19

I

14-22

I

14-71

I

14-91HV

Flashover

5,000 VAC (RMS)

Number of Contacts

Contact Size

8

4

14

1

18

19

1

4

3

1

3

20 16

20

20 12

16 8 Coax

20

7

®

Amphenol Miniature Cylindrical

insert arrangements

front face of pin inserts illustrated

P

A

R

S

A

H

A

N

Y

B

A

R

P

A

T

B

R

H

P

M

C

F

N

G

B

S

U

B

a

U

G

b

D

C

Z

L

D

E

N

J

X

M

T

c

F

C

Z

V

F

D

C

B

K

L

K

M

W

Y

W

E

X

J

K

V

C

D

E

L

E

D

G

F

H

J

H

G

Insert Arrangement

Service Rating

14-AA

16-8

II

16-23

I

16-26

16-70

N/A

I

Number of Contacts

Contact Size

4

8

22

1

26

20

14

1

12

16

20 16

20 12 Coax

A

H

J

A

R

B

P

G

B

K

A

H

B

S

T

C

L

N

J

C

K

U

E

B

P

Y

Z

D

M

X

V

D

H

L

M

E

W

L

D

C

G

F

C

G

E

F

K

G

J

F

D

F

H

E

D

E

Insert Arrangement

Service Rating

16-76

16-99

I

18-5

18-8

18-11

II

Flashover

1.500 VAC (RMS)

II

5

I

Number of Contacts

Contact Size

8

1

5

21

2

8

11

20 12* 2 Coax*

20 16

12

16

*Contact Positions Optional

A

T

A

S

A

B

S

e

H

B

R

U

f

C

V

d

T

K

A

L

V

P

C

c

U

J

P

d

D

e

J

B

W

G

C

b

N

D

j

N

c

E

g

P

M

f

X

g

a

W

M

E

M

F

h

H

C

Y

b

X

Z

N

Y

L

F

G

L

G

D

a

Z

F

D

K

G

H

K

F

E

J

E

H

J

Insert Arrangement

Service Rating

18-30

I

18-32

18-71

II, Coax

18-72

N/A

I

Number of Contacts

Contact Size

29

1

32

20

8

1

10

4

20 16

16 8 Coax

20 12 Coax

A

C

A

H

B

D

A

F

G

C

E

B

C

B

F

D

C

E

Insert Arrangement

Service Rating

18-75

Coax

4

18-76

II

18-80

18-91 HV

Flashover

5,000 VAC (RMS)

I, Coax

Number of Contacts

Contact Size

3

1

6

2

6

8 Coax

12 Coax 8 Coax

20 8 Coax

20

8

Amphenol^®Miniature Cylindrical

insert arrangements

front face of pin inserts illustrated

A

L

A

N

R

U

A

B

L

A

M

X

V

K

P

X

S

B

T

B

C

M

S

C

W

N

D

B

K

H

R

D

S

a

c

Y

a

W

b

T

W

M

E

a

Y

C

J

V

P

E

b

J

Z

C

R

P

N

F

Z

X

J

Z

L

U

V

F

R

U

D

H

M

G

H

D

L

T

G

S

Y

E

K

G

E

K

H

J

F

Insert Arrangement

Service Rating

20-16

II

20-24

20-25

20-26

I

Number of Contacts

Contact Size

16

24

20

25

20

6

16

20 12

A

W

B

R

A

V

K

A

B

W

C

B

X

U

P

X

L

V

J

B

j

D

j

C

Y

a

S

C

T

k

i

k

U

N

i

Z

E

Z

b

D

s

m

Z

D

T

S

M

P

m

r

h

T

a

h

t

a

M

F

d

c

E

r

R

n

Y

U

S

G

g

b

g

L

b

q

n

d

F

p

q

P

R

F

H

C

H

f

c

f

c

X

V

G

N

K

G

D

P

e

W

d

e

N

J

H

G

M

N

F

E

K

J

L

M

K

L

H

Insert Arrangement

Service Rating

20-27

20-39

I

20-41

20-70

Coax

I

Number of Contacts

Contact Size

27

20

37

2

41

20

10

4

20 16

20 8 Coax

A

P

A

N

R

Z

N

B

M

B

F

B

P

X

Y

S

A

C

E

M

K

W

R

L

G

D

C

T

X

G

B

a

b

L

D

E

C

V

S

K

D

W

U

V

F

C

U

T

E

D

J

E

J

F

H

F

G

H

G

Insert Arrangement

Service Rating

20-90

22-7

Coax

7

22-21

II

22-25

Hi-Voltage

I

Number of Contacts

Contact Size

7

21

25

16

20

8 Coax

16

A

Z

A

T

Y

N

A

B

S

B

X

j

P

j

B

C

S

U

a

k

b

R

U

e

R

e

f

B

C

V

M

W

D

d

m

C

V

R

b

a

c

S

h

g

n

V

n

p

e

s

m

l

E

P

h

j

W

X

D

L

C

c

k

t

q

f

c

W

X

i

f

g

P

N

U

Z

d

l

T

D

F

N

r

E

d

L

K

D

b

e

T

g

f

h

d

j

E

G

Y

M

U

g

h

Z

k

F

S

c

Y

H

E

M

J

Y

a

F

X

V

F

b

Z

R

G

a

J

W

L

G

P

H

K

H

K

N

K

L

H

M

G

J

Insert Arrangement

Service Rating

22-32

22-34

22-36

22-41

I

Number of Contacts

Contact Size

32

20

34

20

36

20

27

20

14

16

9

Amphenol^®Miniature Cylindrical

insert arrangements

front face of pin inserts illustrated

A

V

p

U

A

B

T

A

N

A

V

F

H

J

S

C

n

M

B

W

K

B

m

F

B

X

AA

k

Y

Z

a

b

q

S

U

P

L

T

N

D

R

BB

J

C

U

S

L

J

C

E

z

y

G

r

CC

GG

FF

V

j

i

HH

EE

E

F

P

s

M

K

T

D

P

R

DD

N

t

x

u

H

D

R

G

h

w

v

c

g

M

d

G

E

C

H

F

f

e

L

H

J

K

D

Insert Arrangement

Service Rating

22-55

22-70

22-71

22-72

N/A

I

I, Coax

Number of Contacts

Contact Size

55

20

13

6

2

7

12

4

3

20 8 Coax

20

8 Coax

20 16 8 Coax

a

A

b

M

Z

A

B

c

A

Z

A

B

G

C

L

N

B

C

Y

P

Q

b

u

D

X

F

B

F

E

t

d

AA

Y

X

a

g

E

W

e

s

y

K

J

f

C

v

G

F

DD

BB

z

R

f

V

r

e

c

D

G

CC

g

U

W

H

d

S

q

w

x

h

H

V

T

p

T

E

C

U

E

i

J

n

S

j

G

F

m

k

K

R

D

L

D

P

M

N

Insert Arrangement

Service Rating

22-78

Coax

7

22-96

24-31

24-51

I

II

7

I

Number of Contacts

Contact Size

31

16

47

4

8 Coax

12 for

# 10 wire

20 12 Coax

A

a

Z

A

Z

B

d

b

a

B

Y

F

c

Y

C

t

b

C

s

c

v

u

X

D

w

t

z

D

HH

W

y

u

e

d

h

r

D

C

A

B

GG

FF

x

W

E

NN

JJ

AA

BB

E

s

f

q

e

V

U

PP

LL

y

V

F

MM

KK

r

F

g

p

f

EE

z

U

G

q

n

g

G

h

E

DD

AA

T

m

H

p

x

k

v

i

w

i

H

CC

m

BB

S

n

j

J

j

J

k

R

K

P

L

N

M

Insert Arrangement

Service Rating

24-61

24-71

N/A

2

24-79

Coax

I

Number of Contacts

Contact Size

61

20

45

20

2

1

5

16 8 Coax

20 8 Coax

Contact Legend

Contact Size

Symbol

20

16

12

HV

12 Coax

8 Coax

10

Amphenol^®PT, SP, MS/PT

Proprietary/MIL-DTL-26482, Series 1

bayonet coupling and solder termination

®

Amphenol solder contact miniature cylindrical connectors meet the most

critical application needs. Design versatility combined with high reliability

performance makes these series of Miniature Cylindrical Connectors ideal for

environmental sealing or pressurized applications.

wall mounting

receptacle

The MS/PT Series is qualiﬁed to MIL-DTL-26482, Series 1 and has all the outstanding

design characteristics and quality of the PT Series. The SP Series is a modiﬁcation of

the PT, providing special shells with a wide mounting ﬂange for back panel mounting.

A corrosion resistant electrically conductive ﬁnish of cadmium plate with an olive drab

chromate after-treatment is used on the PT and MS/PT. The SP is given a durable

®

non-conductive hard anodic “Alumilite” coating which provides abrasion protection

cable connecting

receptacle*

and resistance to corrosion.

**NEW** 500 hour corrosion resistance, RoHS compliant harsh environment

conductive plating. Gray Zinc over an Electroless Nickel (Gray ZnNi) base, with a Light

Gun Metal Gray appearance.

Shell components for these series are aluminum. The dependable 5 key/keyway

polarization with bayonet lock coupling assures positive mating with no chance of cross

plugging. Spring tension provided by a wave washer in the coupling nut ensures

maintenance of interfacial seal between mating halves.

box mounting

receptacle

Both the insert and main joint gasket are molded from resilient neoprene. This provides

excellent moisture sealing at the gasket and superior electrical isolation of the contact

in the insert.

Both pins and sockets are machined from a copper alloy and are gold plated. This gold

plating eliminates contact corrosion and offers an indeﬁnite shelf life. Socket contacts

for these series are a closed entry design. A breakaway style plug is available in the PT

solder series. Hermetics receptacles are available in PT and MS/PT solder series.

Receptacles with printed circuit board contacts are also available.

straight plug

PT Solder is UL recognized under ﬁle #E115497, Vol. 1, Sec. 5.

The PT, SP and MS/PT Series are intermateable and intermountable with all existing

Miniature Cylindrical Series connectors.

jam nut

receptacle

Refer to pages 4-10 for insert arrangement availability.

PT, SP, MS/PT

Table 1: CONTACT DATA/CONNECTOR RATINGS

Contact Speciﬁcations

Contact

Size

Test

Current

Maximum

Millivolt Drop†

Solder Well

Diameter

Solder Well

Depth

thru bulkhead

receptacle

+.004

.046

+.031

.125

20

16

12

7.5

13.0

23.0

55

50

–.000

+.005

.078

+.031

.188

–.003

–.000

+.004

–.002

+.031

–.000

42

.116

.188

† Silver plated wire

per MIL-

DTL-26482

Service Rating

*This connector

style is sometimes

referred to as a

cable connecting

“plug.” It does,

however, mate

with a straight or

90 degree plug.

Recommended

Operating

AC Voltage

at Sea Level

Test Voltage AC (RMS), 60 cps

Service

Rating

Sea

Level

50,000

ft.

70,000

ft.

110,000

ft.

I

600

1,500

2,300

500

750

375

500

200

II

1,000

11

PT, SP Service Classes

PT and SP connectors are available in the service

classes listed below. Each class, with the exception of

hermetic, offers one or more means of terminating or

supporting a cable or wire bundle.

“A”

general duty

“A”

General duty; back shell is threaded for con-

duit attachment of MS3057 cable clamp

“A” (SR) General duty, with strain relief clamp for cable

or wire bundle support

“C”

Pressurized receptacle; less than 1 cu. in. per

hour leakage at 30 psi over a temperature

range of –65°F to +257°F

“E”

Environmental resistant connectors - sup-

plied with a multi-holed grommet and clamp-

ing nut for moisture-prooﬁng individual open

wires

“E” (SR),

MS / “F”

strain relief

“E” (SR) Environmental resistant strain relief clamp

and grommet for moisture prooﬁng individual

wires; provides added wire bundle support

“P”

Translucent nylon boot for retaining cus-

tomer-applied potting compounds; held in

place by a threaded ring

“P” (SR) Strain relief clamp suitable for retaining cus-

tomer applied potting compounds, with pro-

vision for wire support

“E”,

MS / “E”

open wire seal

“PG”

Compressing cable gland for moisture proof-

ing jacketed cables.

“H”*

Hermetically sealed with compression glass

inserts (see pages 22-25)

Style with printed circuit board contacts- see page 20.

MS/PT Service Classes

The MS/PT Miniature connector is available in the

following certiﬁed service classes:

“P”,

MS / “P”

potting boot

“E”

Environmental resistant connectors - sup-

plied with a multi-holed grommet and clamp-

ing nut for moisture-prooﬁng individual open

wires

“F”

“J”

Grommet seal with strain relief clamp

Compressing clamp and neoprene gland for

moisture prooﬁng multi-conductor jacketed

cable and strain relief. Telescoping sleeves

(MS 3420A) can be used to adapt to cables

smaller than minimum close-down.

“PG”

cable gland

seal

“P”

Translucent nylon boot for retaining cus-

tomer-applied potting compounds; held in

place by a threaded ring

12

PT00 (MS3110)

SP00

wall mounting receptacle

S

(TP)

L

PT

.120 .00ꢀ ꢁDi.

R

Q

M

K

(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄe 24)

SP

.1ꢀ0 .00ꢀ ꢁDi.

4 Holeꢃ

R

S

A

(TP)

“PG” Cable Gland Seal

Z

TERMINATION ASSEMBLIES

“A” General Duty/

“C” Pressurized“

“A” (SR), “E” (SR), “P” (SR),

MS / “F” Strain Relief

“E” Open Wire Seal

“P” Potting Boot

L

V

PT00PG-XX-XXX

G D H

N

D

N

D

“J” Cable Seal

XL

C

.375 MIN

PT00A-XX-XXX

SP00A-XX-XXX

PT00C-XX-XXX

PT00A-XX-XXX (SR)

SP00A-XX-XXX (SR)

PT00E-XX-XXX (SR)

SP00E-XX-XXX (SR)

PT00P-XX-XXX (SR)

SP00P-XX-XXX (SR)

MS3110F-XX-XXX

PT00E-XX-XXX

SP00E-XX-XXX

MS3110E-XX-XXX

PT00P-XX-XXX

SP00P-XX-XXX

MS3110P-XX-XXX

N

D

To complete part number see how to order on page 25.

MS3110J-XX-XXX

Class “A”, “C”

n

(MMC) located within .0025 of (TP)

Receptacle Front View

Receptacle Side View

M +.010

R

(TP)

S

Max.

K +.020

–.010

PT

Z

Max.

A

+.001

–.005

Q

V

–.000

Shell

Size

L

Thread

D

Min.

L

N

Thread

Class A

PT

SP

PT

SP

Max.

PT

SP

Class 2A

PT

SP

Max. Max.

6

8

.469 .641 .688 .953 .348 .493 .524 .906 .431 .462 .3125-32 NEF .468 .438 .175 1.553 .462 .3750-32 NEF

.594 .734 .812 1.047 .473 .493 .524 .906 .431 .462 .4375-28 UNEF .468 .438 .297 1.553 .590 .5000-28 UNEF

10

12

14

16

.719 .812 .938 1.125 .590 .493 .524 .906 .431 .462 .5625-24 NEF

.812 .938 1.031 1.250 .750 .493 .524 .906 .431 .462 .6875-24 NEF

.906 1.031 1.125 1.344 .875 .493 .524 .906 .431 .462 .8125-20 UNEF .468 .438 .663 1.553 .970 .8750-20 UNEF

.969 1.125 1.219 1.438 1.000 .493 .524 .906 .431 .462 .9375-20 UNEF .468 .438 .787 1.553 1.088 1.0000-20 UNEF

.468 .438 .421 1.553 .717 .6250-24 NEF

.468 .438 .546 1.553 .834 .7500-20 UNEF

18 1.062 1.203 1.312 1.516 1.125 .493 .524 .906 .431 .462 1.0625-18 NEF

20 1.156 1.297 1.438 1.672 1.250 .650 .650 1.125 .556 .556 1.1875-18 NEF

22 1.250 1.375 1.562 1.750 1.375 .650 .650 1.125 .556 .556 1.3125-18 NEF

24 1.375 1.500 1.688 1.875 1.500 .683 .683 1.188 .589 .589 1.4375-18 NEF

.531 .438 .879 1.553 1.216 1.1875-18 NEF

.531 .531 1.014 1.703 1.332 1.1875-18 NEF

.531 .531 1.134 1.703 1.460 1.4375-18 NEF

.498 .498 1.259 1.765 1.585 1.4375-18 NEF

Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Class “E”, MS / “E” Class “P”, MS / “P”

Class “J”

N

Class “PG”

B

D

Shell

C

D

G

H

L

N

L

N

D

L

N

XL

L

Max.

Size Thread Min. Max. Max.

Max.

Min.

Max.

Max. Closed Free Max.

Max.

Thread

6

8

–

1.266

1.516

1.578

.440

.560

.685

.813

.930

.192 1.438

.317 1.438

.434 1.438

.548 1.438

.673 1.438

.484

–

6-32 .240 .125

6-32 .302 .188

6-32 .428 .312 1.000 1.922

6-32 .552 .375 1.125 1.922

6-32 .615 .500 1.188 2.047 1.047

8-32 .740 .625 1.438 2.078 1.165

8-32 .740 .625 1.438 2.344 1.290

8-32 .928 .750 1.625 2.344 1.418

8-32 .990 .800 1.719 2.406 1.543

.812 1.922

.875 1.922

.550

.675

.803

.920

.608 .168 .230

.734 .205 .312

.858 .338 .442

.984 .416 .539

.547 2.271 M12x1.5-6H

.675 2.271 M16x1.5-6H

.812 2.411 M16x1.5-6H

.940 2.599 M18x1.5-6H

.936

10

12

14

16

18

20

22

24

1.057

1.175

.798 1.438 1.110 .550 .616 1.067 2.943 M22x1.5-6H

.899 1.438 1.234 .600 .672 1.194 3.172 M25x1.5-6H

1.301 1.024 1.656 1.360 .635 .747 1.322 3.610 M25x1.5-6H 1.180

1.430 1.149 1.656 1.484 .670 .846 1.449 3.766 M32x1.5-6H 1.180

1.555 1.274 1.717 1.610 .740 .894 1.576 3.985 M32x1.5-6H 1.180

All dimensions for reference only.

13

PT01 (MS3111)

cable connecting receptacle

L

S

M

Q

Y

S

A

“PG” Cable Gland Seal

K

Z

TERMINATION ASSEMBLIES

“A” General Duty

“A” (SR), “E” (SR), “P” (SR),

MS / “F” Strain Relief

“E” Open Wire Seal

“P” Potting Boot

L

V

PT01PG-XX-XXX

N

D

G D H

N

D

N

“J” Cable Seal

XL

C

.375 MIN

PT01A-XX-XXX

PT01A-XX-XXX (SR)

PT01E-XX-XXX (SR)

PT01P-XX-XXX (SR)

MS3111F-XX-XXX

PT01E-XX-XXX

MS3111E-XX-XXX

PT01P-XX-XXX

MS3111P-XX-XXX

N

D

Note: This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

To complete part number see how to order on page 25.

MS3111-XX-XXX

Recept. Front View

Receptacle Side View

M

Class “A”,

V

A

K

Q

Shell

Size

6

8

10

12

14

16

18

20

22

24

S

±.020

.688

.812

.938

1.031

1.125

1.219

1.312

1.438

1.562

1.688

Y

±.020

.812

.938

1.062

1.156

1.250

1.344

1.438

1.562

1.688

1.812

+.001

–.005

.348

.473

.590

.750

+.020

–.010

L

Max.

.906

+.016

–.000

Thread

Class 2A

Z

D

L

Max.

N

Max.

.462

.590

.717

.834

.970

1.088

1.216

1.332

1.460

1.585

Thread

Class A

.3750-32 NEF

.5000-28 UNEF

.6250-24 NEF

.7500-20 UNEF

.8750-20 UNEF

1.0000-20 UNEF

1.1875-18 NEF

1.4375-18 NEF

Max.

.948

1.166

Min.

.175

.297

.421

.546

.663

.787

.879

1.041

1.135

1.259

.494

.650

.683

.400

.535

.568

.3125-32 NEF

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8125-20 UNEF

.9375-20 UNEF

1.0625-18 NEF

1.1875-18 NEF

1.3125-18 NEF

1.4375-18 NEF

1.553

1.703

1.765

.875

1.000

1.125

1.250

1.375

1.500

1.125

1.188

Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Class “E”, MS / “E” Class “P”, MS / “P”

Class “J”

N

Class “PG”

D

Shell

C

D

G

H

L

N

L

N

D

L

N

XL

B

L

Max.

Size Thread Min. Max. Max.

Max.

Min.

Max.

Max. Closed Free Max.

Max.

Thread

6

8

–

1.266

1.516

1.578

.440

.560

.685

.813

.930

.192 1.438

.317 1.438

.434 1.438

.548 1.438

.673 1.438

.484

–

6-32 .240 .125

6-32 .302 .188

6-32 .428 .312 1.000 1.922

6-32 .552 .375 1.125 1.922

6-32 .615 .500 1.188 2.047 1.047

8-32 .740 .625 1.438 2.078 1.165

8-32 .740 .625 1.438 2.344 1.290

8-32 .928 .750 1.625 2.344 1.418

8-32 .990 .800 1.719 2.406 1.543

.812 1.922

.875 1.922

.550

.675

.803

.920

.608 .168 .230

.734 .205 .312

.858 .338 .442

.984 .416 .539

.547 2.271 M12x1.5-6H

.675 2.271 M16x1.5-6H

.812 2.411 M16x1.5-6H

.940 2.599 M18x1.5-6H

.936

10

12

14

16

18

20

22

24

1.057

1.175

.798 1.438 1.110 .550 .616 1.067 2.943 M22x1.5-6H

.899 1.438 1.234 .600 .672 1.194 3.172 M25x1.5-6H

1.301 1.024 1.656 1.360 .635 .747 1.322 3.610 M25x1.5-6H 1.180

1.430 1.149 1.656 1.484 .670 .846 1.449 3.766 M32x1.5-6H 1.180

1.555 1.274 1.717 1.610 .740 .894 1.576 3.985 M32x1.5-6H 1.180

All dimensions for reference only.

14

PT02 (MS3112)

SP02

box mounting receptacle

S

L

PT

R

.120 .00ꢀ ꢁDi.

M

(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄe 24)

(TP)

SP

.1ꢀ0 .00ꢀ ꢁDi.

4 Holeꢃ

R

A

N

S

(TP)

K

Z

PT02A-XX-XXX

SP02A-XX-XXX

PT02C-XX-XXX

SP02C-XX-XXX

PT02E-XX-XXX

SP02E-XX-XXX

MS3112E-XX-XXX

PT02P-XX-XXX

SP02P-XX-XXX

MS3112P-XX-XXX

*

To complete part number see how to order on page 25.

n

(MMC) located within .0025 of (TP)

*

The PT02 and SP02 box mounting receptacles are made only to complete a series;

no provision is made for accessories or potting on the rear skirt.

Receptacle Front View

Receptacle Side View

K

+.020

–.010

M

+.031

–.000

R

(TP)

Z

Max.

A

+.001

–.005

N

Dia.

Max.

S

Shell

Size

L

Max.

PT

.469

SP

PT

SP

PT

SP

PT

SP

PT

SP

6

8

.641

.688

.953

.348

.473

.493

.650

.683

.524

.650

.683

.825

.431

.556

.589

.462

.556

.589

.323

.449

.465

.526

.493

.438

.531

.497

.594

.734

.812

1.047

1.125

1.250

1.344

1.438

1.516

1.672

1.750

1.875

10

12

14

16

18

20

22

24

.719

.812

.938

.590

.825

.573

.812

.938

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.825

.699

.906

1.031

1.125

1.203

1.297

1.375

1.500

.875

.825

.823

.969

1.000

1.125

1.250

1.375

1.500

.825

.949

1.062

1.156

1.250

1.375

.825

1.073

1.199

1.323

1.449

1.076

1.109

All dimensions for reference only.

15

PT06 (MS3116)

SP06

straight plug

S

L

J

Z

Q

“PG” Cable Gland Seal

TERMINATION ASSEMBLIES

“A” General Duty

“A” (SR), “E” (SR), “P” (SR),

MS / “F” Strain Relief

“E” Open Wire Seal

“P” Potting Boot

L

V

N

D

G D H

N

D

N

PT06PG-XX-XXX

SP06PG-XX-XXX

PTG06PG-XX-XXX

C

“J” Cable Seal

.375 MIN

PT06A-XX-XXX

SP06A-XX-XXX

PTG06A-XX-XXX

XL

PT06A-XX-XXX (SR)

SP06A-XX-XXX (SR)

PTG06A-XX-XXX (SR)

PT06E-XX-XXX (SR)

SP06E-XX-XXX (SR)

PTG06E-XX-XXX (SR)

PT06P-XX-XXX (SR)

SP06P-XX-XXX (SR)

PTG06P-XX-XXX (SR)

MS3116F-XX-XXX

PT06E-XX-XXX

SP06E-XX-XXX

PTG06E-XX-XXX

MS3116E-XX-XXX

PT06P-XX-XXX

SP06P-XX-XXX

PTG06P-XX-XXX

MS3116P-XX-XXX

N

D

MS3116J-XX-XXX

To complete part number see how to order on page 25.

Plug Front View

Plug Side View

Q Thread

Class 2A

Class “A”

N

Max.

Shell

Size

S

Max.

L

Max.

Z

Max.

D

Min.

L

Max.

V Thread

Class A

J

6

8

.625

.750

.859

1.013

1.156

1.281

1.391

1.531

1.656

1.776

.353

.415

.906

1.062

1.125

.3125-32 NEF

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8125-20 UNEF

.9375-20 UNEF

1.0625-18 NEF

1.1875-18 NEF

1.3125-18 NEF

1.4375-18 NEF

.594

.672

.175

.297

.421

.546

.663

.787

.879

1.014

1.135

1.259

1.609

1.656

1.750

.462

.590

.717

.834

.970

1.088

1.216

1.332

1.460

1.587

.3750-32 NEF

.5000-28 UNEF

.6250-24 NEF

.7500-20 UNEF

.8750-20 UNEF

1.0000-20 UNEF

1.1875-18 NEF

1.4375-18 NEF

10

12

14

16

18

20

22

24*

Class “A” (SR), “E” (SR), “P” (SR), MS / “F” Class “E”, MS / “E” Class “P”, MS / “P”

Class “J”

Class “PG”

D

Shell

C

D

G

H

L

N

L

N

D

L

N

XL

B

L

Size Thread Min. Max. Max.

Max.

Min.

Max.

Max. Closed Free Max.

Max.

Thread

Max.

6

8

–

1.266

1.516

1.578

.440

.560

.685

.813

.930

.192 1.438

.317 1.438

.434 1.438

.548 1.438

.673 1.438

.484

–

6-32 .240 .125

6-32 .302 .188

6-32 .428 .312 1.000 1.922

6-32 .552 .375 1.125 1.922

6-32 .615 .500 1.188 2.047 1.047

8-32 .740 .625 1.438 2.078 1.165

8-32 .740 .625 1.438 2.344 1.290

8-32 .928 .750 1.625 2.344 1.418

8-32 .990 .800 1.719 2.406 1.543

.812 1.922

.875 1.922

.550

.675

.803

.920

.608 .168 .230

.734 .205 .312

.858 .338 .442

.984 .416 .539

.547 2.271 M12x1.5-6H

.675 2.271 M16x1.5-6H

.812 2.411 M16x1.5-6H

.940 2.599 M18x1.5-6H

.936

10

12

14

16

18

20

22

24

1.057

1.175

.798 1.438 1.110 .550 .616 1.067 2.943 M22x1.5-6H

.899 1.438 1.234 .600 .672 1.194 3.172 M25x1.5-6H

1.301 1.024 1.656 1.360 .635 .747 1.322 3.610 M25x1.5-6H 1.180

1.430 1.149 1.656 1.484 .670 .846 1.449 3.766 M32x1.5-6H 1.180

1.555 1.274 1.717 1.610 .740 .894 1.576 3.985 M32x1.5-6H 1.180

All dimensions for reference only.

16

PT07 (MS3114)

SP07

jam nut receptacle

S

H

M

Z

“A” General Duty/

“C” Pressurized Receptacle

PT07A-XX-XXX

S

A

J

PT07C-XX-XXX

R

P

K

TERMINATION ASSEMBLIES

“E” Open Wire Seal

“A” (SR), “E” (SR), “P” (SR), MS / “F” Strain Relief

“P” Potting Boot

M

Z

M

Z

M

Z

G D H

D N

N

A

J

C

L

R

P

L

P

L

PT07E-XX-XXX

SP07E-XX-XXX

MS3114E-XX-XXX

PT07A-XX-XXX (SR)

SP07A-XX-XXX (SR)

PT07E-XX-XXX (SR)

MS3114F-XX-XXX

PT07P-XX-XXX

MS3114P-XX-XXX

To complete part number see how to order on page 25.

Recept. Front View

Receptacle Side View

P Panel Thickness

Class “E”, MS / “E”

N

A Dia.

+.001

–.005

.348

.473

.590

.750

J Flat

+.000

–.010

.405

.530

.655

.818

K

+.011

–.010

R

Shell

Size

H

±.016

Thread

Class 2A UNEF

L

Max.

Z

S

M

Min.

.062

Max.

.125

.250

Z

M

Max.

±.040

6

8

.625

.750

.812

.938

.125

.156

.696

.884

.917

.4375-28

.5625-24

.6875-24

.8750-20

1.0000-20

1.1250-18

1.2500-18

1.3750-18

1.5000-18

1.6250-18

.231

.261

.228

.568

.630

.660

.696

.884

.917

.604

.729

.854

.979

1.104

1.229

1.354

1.510

1.635

1.760

.191

.221

.188

10

12

14

16

18

20

22

24

.875

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

1.062

1.188

1.312

1.438

1.562

1.688

1.816

.875

.942

1.000

1.125

1.250

1.375

1.500

1.066

1.191

1.316

1.441

1.566

Class “A” (SR), “P” (SR), MS / “F”

D

Class “E” (SR)

Class “P”, MS / “P”

L +.010

–.026

Shell

Size Thread

6

8

10

12

14

16

18

20

22

24*

C

D

Max.

–

D

Max.

G

H

L

M

–

Thread

–

G

H

L

–

M

–

Max.

.202

.327

.444

.558

.683

.808

.909

1.034

1.159

1.284

M

N

Z

–

.593

.718

.696

.884

.917

.484 .191

.608 .191

.734 .191

.858 .191

.984 .191

1.110 .191

1.234 .191

1.360 .221

1.484 .221

1.610 .188

6-32

8-32

.250

.312

.438

.562

.625

.750

.938

.125

.188

.312

.375

.500

.625

.750

.800

.781 1.062

.844 1.062

.969 1.062

1.094 1.062

1.156 1.188

1.406 1.188

1.406 1.250

1.594 1.250

.696

.884

.917

6-32

8-32

.250

.312

.438

.562

.625

.750

.938

1.000

.125

.188

.312

.775 1.029 .696

.837 1.029 .696

.963 1.029 .696

.375 1.087 1.029 .696

.500 1.150 1.161 .696

.625 1.400 1.161 .696

.625 1.400 1.224 .884

.750 1.587 1.224 .884

.800 1.681 1.320 .917

8-32 1.000

* Size 24 strain relief available in PT only.

All dimensions for reference only.

17

PT08 E

SP08 E

90 degree plug

G

TERMINATION ASSEMBLIES

“E” Open Wire Seal, “E” (SR) Strain Relief

“P” Potting Boot 75 degrees

L

E

B

A

K

H

PT08E-XX-XXX

SP08E-XX-XXX

PT08E-XX-XXX (SR)

SP08E-XX-XXX (SR)

PT08P-XX-XXX

SP08P-XX-XXX

D

C

To complete part number see how to order on page 25.

All lockwire holes are .044 Dia. Min.

Plug Front View

Plug Side View

Class “E”, “E” (SR)

Class “P”

G

Dia.

Max.

C

+.010

–.025

E

+.047

–.025

Shell

Size

B

±.031

D

±.062

L

A

H

K

±.015

L

±.057

1.786

1.880

1.965

2.113

2.315

2.423

2.695

2.742

2.980

±.025

.469

.547

.625

.734

.750

.781

.859

.906

1.169

±.015

.312

.438

.516

.625

.656

.703

.766

.812

.918

Max.

1.656

1.781

1.843

1.953

2.000

2.046

2.218

2.265

2.624

8

10

12

14

16

18

20

22

24

.796

.921

.655

.749

.169

.170

.264

.310

.330

.444

.510

.515

.656

.941

1.191

1.254

1.316

1.562

1.625

1.719

1.751

.339

.393

.450

.519

.583

.621

.683

.739

.797

.438

.562

1.046

1.171

1.297

1.422

1.562

1.672

1.797

.812

.688

.905

.781

1.030

1.015

1.077

1.139

1.265

.890

1.000

1.125

1.234

1.374

All dimensions for reference only.

18

PT Connectors with

Printed Circuit Board Contacts

S

(TP)

4 HOLES

L

.120 .00ꢀ ꢁDi.

(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄe 24)

R

M

.030 .001

N

Box Mounting Receptacle (PT02)

with PCB Contacts

R

S

A

(TP)

Order by applicable part number in chart below;

add insert arrangement number. Refer to insert availability

on pages 4-10.

n

(MMC) located within .0025 of (TP)

Z

K

Receptacle Front View

S

Receptacle Side View

M

Part Number*

PT02 with PCB

Contacts

A

+.001

–.005

K

+.021

–.010

N

Dia.

Max.

Z

Shell

Size

R

+.011

–.010

L

+.031

–.000

+.040

–.050

(TP)

Max.

6

8

71-570120-XXX

71-570121-XXX

71-570122-XXX

71-570123-XXX

71-570124-XXX

71-570125-XXX

71-570126-XXX

71-570127-XXX

71-570128-XXX

71-570129-XXX

.469

.594

.688

.812

.348

.473

.493

.650

.683

.825

.431

.556

.589

.323

.449

.380

.286

.253

10

12

14

16

18

20

22

24

.719

.938

.590

.825

.573

.812

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.825

.699

.906

.875

.825

.823

.969

1.000

1.125

1.250

1.375

1.500

.825

.949

1.062

1.156

1.250

1.375

.825

1.073

1.199

1.323

1.449

1.076

1.109

All dimensions for reference only.

S

H

M

Z

Jam Nut Receptacle (PT07)

with PCB Contacts

A

S

J

All lockwire holes are .044 Dia. Min.

.030 .00ꢀ

Order by applicable part number in chart below;

add insert arrangement number. Refer to insert availability

on pages 4-10.

R

P

K

Receptacle Front View

Receptacle Side View

P Panel

Part Number*

PT07 with PCB

Contacts

H

+.017

–.016

A Dia.

+.001

–.005

J Flat

+.000

–.010

K

+.011

–.010

R

Z

Thickness

Shell

Size

S

±.010

M

Thread

Class 2A

+.025

–.035

±.010

.696

.884

.917

Min.

.062

Max.

.125

6

8

71-533720-XXX

71-533721-XXX

71-533722-XXX

71-533723-XXX

71-533724-XXX

71-533725-XXX

71-533726-XXX

71-533727-XXX

71-533728-XXX

71-533729-XXX

.625

.750

.812

.938

.348

.473

.405

.530

.125

.156

.4375-28 UNEF

.5625-24 UNEF

.6875-24 UNEF

.8750-20 UNEF

.376

.367

.334

10

12

14

16

18

20

22

24

.875

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

.590

.655

1.062

1.188

1.312

1.438

1.562

1.688

1.816

.750

.818

.875

.942

.125 1.0000-20 UNEF

.125 1.1250-18 UNEF

.125 1.2500-18 UNEF

.250 1.3750-18 UNEF

.250 1.5000-18 UNEF

.250 1.6250-18 UNEF

1.000

1.125

1.250

1.375

1.500

1.066

1.191

1.316

1.441

1.566

All dimensions for reference only.

* For RoHS compliance connectors with PCB contacts change “71”- to:

“FL” designates conductive gray zinc nickel plating

“93” designates black zinc cobalt plating

19

PTB

SPB

thru bulkhead receptacle

L

S

(TP)

M

PTB

.120 .00ꢀ ꢁDi.

R

P

(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄe 24)

SPB

.1ꢀ0 .00ꢀ ꢁDi.

4 Holeꢃ

R

S

A

(TP)

K

* PTB-XX-XXX

* SPB-XX-XXX

* To complete part number add desired arrangement number (refer to pages 4 and 5 for insert availability) and add “PS”;

Example: PTB-18-32PS. If a rotation is required, use PTB-18-32PS and add W, X, Y or Z. Example: PTB-18-32 PSW.

The socket end of the insert always appears at the “P” dimension end of shell.

n

(MMC) located within .0025 of (TP)

Receptacle Front View

Receptacle Side View

M

R

(TP)

P

A

+.001

–.005

K

+.016

–.000

S

Max.

Shell

Size

L

+.010

–.000

PTB

.469

SPB

.641

PTB

.688

SPB

.953

±.005

PTB

.125

SPB

.188

.312

6

8

.348

.473

.625

.781

1.050

1.330

.562

.688

.594

.734

.812

1.047

1.125

1.250

1.344

1.438

1.516

1.672

1.750

1.875

10

12

14

16

18

20

22

24

.719

.812

.938

.590

.812

.938

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.906

1.031

1.125

1.203

1.297

1.375

1.500

.875

.969

1.000

1.125

1.250

1.375

1.500

1.062

1.156

1.250

1.375

All dimensions for reference only.

20

PT

hermetic

Three shell styles are available in the hermetic PT

bayonet series:

•

PTIH (MS3113H)

PT02H

PT07H (MS3114H)

These hermetic connectors are only available with solder cup or

ﬂat eyelet pin contacts in the MS/PT version. Socket contacts

are available in some proprietary PT versions. Other design

characteristics of the PT hermetic connector series are as

follows:

solder

mounting

receptacle

Shell sizes: 8 through 24 (tin plated)

Contact count: 2 through 61. Refer to pages 4 and 5 for insert

availability for hermetics.

Current:

5.0 amp each #20 contact

10 amp each #16 contact

17 amp each #12 contact

Contacts are tin plated for PT; gold is optional

Dielectric Withstanding Voltage (sea level):

1500 volts (RMS) 60 cps, Service Rating I

2300 volts (RMS) 60 cps, Service Rating II

Compression glass inserts, permanently lettered

-6

Helium Leakage: Less than 1.0 X 10 cc/sec.

at 15 psi differential

box

mounting

receptacle

Physical Shock: 100 G’s

Vibration: Exceeds MIL-E-5272 Procedure II

Thermal Shock: No deterioration or failure after 5 cycles

at –55°F to +257°F

Intermateability: Mates with MS3116 and PT06

Refer to pages 4-10 for insert arrangement availability.

jam nut

receptacle

21

PTIH (MS3113H)

hermetic solder mounting receptacle

L

W

G

A

N

.031 +.006

–.005

Z

*

PTIH-XX-XXX

** PTIY-XX-XXX

** MS3113H-XXCXXX

PTIH-XX-XXX (100)

†

†† PTIY-XX-XXX (100)

†† MS3113H-XXYXXX

To complete part number see how to order on page 25.

Solder cup pin contacts without interfacial seal

** Solder cup pin contacts with interfacial seal

Flat eyelet pin contacts without interfacial seal

*

†

†† Flat eyelet pin contacts with interfacial seal

Recept.

Front View

Receptacle

Side View

G

Dia.

Max.

A Dia.

+.001

–.005

L

N Dia.

+.001

–.005

W

+.011

–.010

Shell

Size

+.025

–.016

Z

Max.

.386

.418

6

8

.511

.636

.348

.473

.447

.509

.542

.438

.562

.094

.125

10

12

14

16

18

20

22

24

.761

.590

.672

.855

.750

.781

.980

.875

.906

1.105

1.229

1.323

1.449

1.574

1.000

1.125

1.250

1.375

1.500

1.031

1.156

1.250

1.375

1.500

All dimensions for reference only.

22

PT02H

hermetic box mounting receptacle

PT

S

(TP)

.120 .00ꢀ ꢁDi.

R

L

W

(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄe 24)

SP

.1ꢀ0 .00ꢀ ꢁDi.

4 Holeꢃ

R

S

A

N

Z

(TP)

U

*

PT02H-XX-XXX

** PT02Y-XX-XXX

PT02H-XX-XXX (100)

†† PT02Y-XX-XXX (100)

†

To complete part number see how to order on page 25.

Solder cup pin contacts without interfacial seal

** Solder cup pin contacts with interfacial seal

Flat eyelet pin contacts without interfacial seal

†† Flat eyelet pin contacts with interfacial seal

*

†

n

(MMC) located within .0025 of (TP)

Receptacle Front View

Receptacle Side View

A Dia.

+.001

–.005

L

N Dia.

+.001

–.005

U

+.011

–.010

Shell

Size

R

(TP)

S

±.016

K

±.015

+.025

–.015

Z

Max.

6

8

.469

.594

.688

.812

.348

.473

.047

.079

.494

.556

.588

.438

.562

.062

.344

.377

10

12

14

16

18

20

22

24

.719

.938

.590

.672

.812

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.781

.906

.875

.906

.969

1.000

1.125

1.250

1.375

1.500

1.031

1.156

1.250

1.375

1.500

1.062

1.156

1.250

1.375

All dimensions for reference only.

23

PT07H (MS3114H)

hermetic jam nut receptacle

S

H

M

Z

S

A

R

P

K

*

PT07H-XX-XXX

** PT07Y-XX-XXX

** MS3114H-XXCXXX

†

PT07H-XX-XXX (100)

†† PT07Y-XX-XXX (100)

†† MS3114H-XXYXXX

To complete part number see how to order on page 25.

Solder cup pin contacts without interfacial seal

** Solder cup pin contacts with interfacial seal

Flat eyelet pin contacts without interfacial seal

*

†

†† Flat eyelet pin contacts with interfacial seal

Receptacle Front

View

Receptacle Side View

P Panel Thickness

H Hex

+.017

–.016

A

+.001

–.005

K

+.043

–.016

M

+.031

–.000

R

Shell

Size

S

+.016

Thread

Class 2A

Z

Max.

.125

.250

Min.

.062

6

8

.812

.938

.625

.750

.348

.473

.094

.125

.696

.884

.917

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8750-20 UNEF

1.0000-20 UNEF

1.1250-18 NEF

1.2500-18 NEF

1.3750-18 NEF

1.5000-18 NEF

1.6250-18 NEF

.206

.081

.048

10

12

14

16

18

20

22

24

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

.875

.590

1.062

1.188

1.312

1.438

1.562

1.688

1.812

.750

.875

1.000

1.125

1.250

1.375

1.500

All dimensions for reference only.

24

PT, SP, MS/PT

how to order

PT, SP

MS/PT

MIL-DTL-26482, Series 1

Part number MS3110E20-41PW is shown as follows:

To more easily illustrate ordering procedure, part number PT00A-20-41PW(SR) is

shown as follows:

PT

00

A

- 20 - 41

P

W

(SR)

MS

311

0

E

20 - 41

P

W

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

See code below:

1. Connector Type

For Hermetic connectors part number MS3113H20Y-

41PW is shown as follows:

“PT” designates standard olive drab, electrically conductive cadmium plate

bayonet lock connector with solder contacts

“SP” designates electrically non-conductive, hard anodic coated bayonet lock

connector with solder contacts and larger ﬂange and mounting holes for

back panel mounting

MS

311

3

H

20 Y 41

5, 6

P

7

W

8

1

2

3

4

See code below:

1. “MS” designates Military Standard

2. Speciﬁcation Number

“PTG” designates plug with grounding ﬁngers

2. Shell Style

“311” designates basic family number for

MIL-DTL-26482, Series 1 solder type

3. Shell Style

“00”

“01”

“02”

“06”

“07”

“08”

“B”

designates wall mounting receptacle

designates cable connecting receptacle**

designates box mounting receptacle

designates straight plug

“0” designates wall mounting receptacle

“1” designates cable connecting receptacle**

“2” designates box mounting receptacle

“3” designates solder mount receptacle

(hermetic only)

designates jam nut receptacle

designates 90 degree plug cable support

designates thru bulkhead receptacle (pressurized)

designates solder mount receptacle (Hermetic only)

“I”

“4” designates jam nut receptacle

“6” designates straight plug

3. Service Classes

“A”

“C”

“E”

“P”

designates general duty back shell

designates pressurized receptacle

designates environmental resisting open wire seal with grommet and nut

designates assembly with potting boot

4. Service Class

“E” designates environmental resisting connector

“F” designates environmental resisting connectors

with strain relief

“J” designates clamp assembly for moisture prooﬁng

multi-jacketed cables, with strain relief

“P” designates potted type with potting boot

“H” designates hermetic

“PG” designates adapter for cable gland for moisture prooﬁng jacketed cables

“H”

“Y”

designates hermetic* without interfacial seal

designates hermetic* with interfacial seal

4. Shell Size

“20” designates shell size. Shell sizes 6 through 24 available.

5. Insert Arrangement - Refer to pages 4-10 for insert availability.

“20 - 41” designates insert arrangement. (The number following the hyphen is

the number only that is used in the part number).

6. Contacts

5. Shell Size

“20” designates shell size. Shell sizes 8 through 24

available.

6. Insert Arrangement - Refer to pages 4-10 for insert

availability.

“P” designates pin contacts

“S” designates socket contacts

“20 - 41” designates arrangement. (The number

following the hyphen is the number only that is used in

the part number).

For ordering connectors with printed circuit board contacts, see pg. 19.

7. Insert Rotation - Refer to page 6.

“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “normal position.

No letter required for normal (no rotation) position.

8. “SR” designates a strain relief clamp.

Hermetic version

“20Y41” designates insert arrangement; specify “Y” for

ﬂat eyelet pin contacts, or “C” for solder cup pin

contacts

Indicate optional ﬁnishes as follows:

7. Contact Conﬁguration

(003) olive drab cadmium plate (standard on “PT”)

(100) Sufﬁx added for ﬂat eyelet pin contacts in hermetic versions

OR

RoHS Compliant ﬁnish sufﬁx as follow:

(005) anodic coating - Alumilite^®(standard on “SP”)

(023) electroless nickel

“P” designates pin contacts

“S” designates socket contacts

8. Insert Rotation- Refer to page 6.

“W”, “X”, “Y”, “Z” designate that insert is rotated in it

shell from “normal” position. No letter require fo normal

(no rotation) position.

(025) black zinc cobalt plating

(072) conductive gray zinc nickel plating

(424) electroless nickel ﬁnish with strain relief

(470) black zinc cobalt plating

*

Hermetic connectors are supplied with tin plated shells.

** This connector style is sometimes referred to as a cable

connecting “plug”. It does, however, mate with either a straight or

90 degree plug.

with strain relief

25

Amphenol PT-SE, SP-SE, MS/PT-SE

Proprietary/MIL-DTL-26482, Series 1

bayonet coupling and crimp termination

®

Amphenol SE crimp type miniature connectors provide

performance and versatility needed for applications

demanding high reliability and crimp removable contacts.

These crimp contacts are rear insertable/front release and

are held in position by an MS approved spring tower

retention system.

The MS/PT-SE Series is qualiﬁed to MIL-DTL-26482, Series 1

and has all the outstanding design characteristics and quality of

the PT Series.

wall mounting

receptacle

The SP-SE Series is a modiﬁcation of the PT-SE, providing

special shells with a wide mounting ﬂange for back panel

mounting.

A corrosion resistant electrically conductive ﬁnish of cadmium

plate with an olive drab chromate after-treatment is used on the

PT-SE and MS/PT-SE. The SP-SE is given a durable non-con-

ductive hard anodic “Alumilite” coating which provides abrasion

protection and resistance to corrosion.

cable

connecting

receptacle*

®

**NEW** 500 hour corrosion resistance, RoHS compliant

harsh environment conductive plating. Gray Zinc over an

Electroless Nickel (Gray ZnNi) base, with a Light Gun Metal

Gray appearance.

Shell components for these series are aluminum. The depend-

able 5 key/keyway polarization with bayonet lock coupling

assures positive mating with no chance of cross plugging.

Spring tension provided by a wave washer in the coupling nut

ensures maintenance of interfacial seal between mating halves.

box mounting

receptacle

Both the insert and main joint gasket are molded from resilient

neoprene. This provides excellent moisture sealing at the gasket

and superior electrical isolation of the contact in the insert.

Both pins and sockets are machined from a copper alloy and are

gold plated. This gold plating eliminates contact corrosion and

offers an indeﬁnite shelf life. Socket contacts for these series are

a closed entry design.

straight plug

Breakaway style plug is available in PT-SE crimp.

The PT-SE, SP-SE and MS/PT-SE Series are intermateable and

intermountable with all existing Miniature Cylindrical Series

connectors.

jam nut

receptacle

Refer to pages 4-10 for insert arrangement availability.

*

This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

26

PT-SE. SP-SE, MS/PT-SE

Contact Speciﬁcations

Maximum

Millivolt

Drop†

Contact

Size

Test

Current

Crimp Well

Diameter

Minimum

Well Depth

20

16

12

7.5

13.0

23.0

55

49

42

.049 ±.001

.067 ±.001

.100 ±.002

.267

.236

“SE”,

MS / “E”

Service Rating

open wire seal

Recommended

Operating

Test Voltage AC (RMS), 60 cps

Service

Rating

AC Voltage

at Sea Level

Sea

Level

50,000 70,000 110,000

ft.

I

600

1,500

2,300

500

750

375

500

200

II

1,000

† Silver plated wire per MIL-DTL-26482

PT-SE and SP-SE Service Classes

PT-SE and SP-SE connectors are available in the three

service classes listed below.

“SE” (SR),

MS / “F”

strain relief

clamp

“SE”

Open wire sealing - environmental resistant,

with a nut and grommet for moisture prooﬁng

individual wires

“SE” (SR)Strain relief clamp - environmental resistant

strain relief clamp and grommet for moisture

prooﬁng individual wires; provides added

wire bundle support

“SP”

Translucent nylon boot for retaining customer

applied potting compounds; held in place by

a threaded ring

MS/PT-SE Service Classes

MS-SE series connectors are available in the following

certiﬁed service classes:

“SP”,

MS / “P”

potting boot

“E”

Open wire sealing - environmental resisting

connectors are supplied with a multi-hole

grommet and clamping nut for moisture

prooﬁng individual open wires

“F”

“P”

Environmental resistant strain relief clamp

and grommet for moisture prooﬁng individual

wires; provides added wire bundle support

Potting applications - these connectors are

supplied with a translucent nylon boot for re-

tention of customer applied potting com-

pound

27

PT00 SE (MS3120)

SP00 SE

wall mounting receptacle

S

T Dia.

R

4 Holes

(TP)

R

S

(TP)

TERMINATION ASSEMBLIES

“SE” (SR), MS / “F” Strain Relief

“SE” Open Wire Seal

“SP” Potting Boot

L

M

K

A

N

A

D N

A

G

N

M

K

M

K

PT00SE-XX-XXX

SP00SE-XX-XXX

MS3120E-XX-XXX

PT00SE-XX-XXX (SR)

SP00SE-XX-XXX (SR)

MS3120F-XX-XXX

PT00SP-XX-XXX

SP00SP-XX-XXX

To complete part number see how to order on page 36.

(MMC) located within .005 of (TP)

n

Receptacle Front View

Receptacle Side View

M

+.010

–.000

R

(TP)

S

Max.

T Dia.

± .005

P*

A Dia.

+.001

–.005

Max. Panel Thickness

Shell

Size

K

±.016

PT

.594

.719

.812

.906

SP

PT

SP

PT

SP

PT

SP

PT

SP

8

10

12

14

16

18

20

22

24

–

.828

.954

–

.120

.147

–

.473

.590

.750

.062

.094

.431

.556

.589

–

.094

.219

–

.812

.938

1.031

1.125

1.203

1.297

1.375

1.500

1.141

1.266

1.360

1.453

1.532

1.688

1.766

1.891

.150

.462

.556

.589

.125

.219

1.047

1.141

1.234

1.328

1.453

1.578

1.703

.875

.969

1.000

1.125

1.250

1.375

1.500

1.062

1.156

1.250

1.375

Class “SE”, MS / “E”

Class “SE” (SR), MS / “F”

Class “SP”, MS / “P”

Shell

Size

L

Max.

N Dia.

Max

G

Dia.

L

Max.

N

Max.

D Dia.

Max.

L

Max.

N Dia.

Max.

8

10

12

14

16

18

20

22

24

1.328

1.359

1.422

.560

.704

.825

.125

.188

.312

.375

.500

.625

.750

.800

2.422

2.537

2.824

2.900

.781

.844

.969

1.094

1.156

1.406

1.594

1.688

–

.444

.558

.683

.808

.909

1.034

1.159

1.284

1.656

1.750

1.782

.734

.858

.984

1.110

1.234

1.360

1.484

1.610

.954

1.080

1.204

1.330

1.454

1.580

* Back panel mounting

All dimensions for reference only.

28

MF00 SE (MS3128)

wall mounting receptacle

T¹ Dia.

4 Holes

S

R¹

(

TP)

R

(TP)

R

R¹

S

(

TP) (TP)

T Dia.

4 Holes

TERMINATION ASSEMBLIES

MS / “E” Open Wire Seal

MS / “F” Strain Relief

L

M

K

N

A

G F N

M

K

MF00SE-XX-XXX

MF00SE-XX-XXX (SR)

MS3128F-XX-XXX

MS3128E-XX-XXX

To complete part number see how to order on page 36.

(MMC) located within .0025 of (TP)

n

Receptacle Front View

Receptacle Side View

Class MS / “E”

Class MS / “F”

A Dia.

+.001

–.005

M

+.010

–.000

Shell

Size

S

T Dia.

T¹Dia.

±.005

K

±.016

L

Max.

N

Max.

F

Min.

G

Dia.

L

Max.

N

Max.

R

R¹

Max.

±.005

.120

.147

10

12

14

16

18

20

22

24

.719

.812

1.141

1.266

1.360

1.453

1.532

1.688

1.766

1.891

.150

.590

.750

.062

.094

.462

.556

.589

1.328

1.359

1.422

.685

.813

.297

.422

.547

.609

.734

.922

.984

.188

.312

.375

.500

.625

.750

.800

1.906

2.000

2.172

2.234

.891

1.016

1.141

1.203

1.469

1.656

1.750

.812

.938

.906

1.031

1.125

1.203

1.297

1.375

1.500

.875

.930

.969

1.000

1.125

1.250

1.375

1.500

1.057

1.175

1.301

1.428

1.533

1.062

1.156

1.250

1.375

All dimensions for reference only.

29

PT01 SE (MS3121)

SP01 SE

cable connecting receptacle

S

TERMINATION ASSEMBLIES

“SE” (SR), MS / “F” Strain Relief

“SE”, MS / “E” Open Wire Seal

“SP”, MS / “P” Potting Boot

L

N

A

G

N

A

D

N

A

K

PT01SE-XX-XXX

SP01SE-XX-XXX

MS3121E-XX-XXX

PT01SE-XX-XXX (SR)

SP01SE-XX-XXX (SR)

MS3121F-XX-XXX

PT01SP-XX-XXX

SP01SP-XX-XXX

MS3121P-XX-XXX

Note: This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

To complete part number see how to order on page 36.

Receptacle

Front View

Receptacle

Side View

Class “SE”, MS / “E”

Class “SE” (SR), MS / “F”

Class “SP”, MS / “P”

A Dia.

+.001

–.005

N

Dia.

Max.

N

Dia.

Max.

Shell

Size

S

Max.

K

±.018

L

Max.

G

Dia.

L

Max.

N

Max.

D

Dia.

L

Max.

8

10

12

14

16

18

20

22

24

.812

.955

.473

.590

.094

.115

1.522

1.709

.560

.685

.125

.188

.312

.375

.500

.625

.750

.800

2.422

2.537

2.824

2.900

.828

.891

–

.444

.558

.683

.808

.909

1.034

1.159

1.284

1.656

1.750

1.782

.734

1.048

1.142

1.236

1.329

1.455

1.579

1.709

.750

.813

1.016

1.141

1.203

1.469

1.656

1.750

.858

.875

.930

.984

1.000

1.125

1.250

1.375

1.500

1.057

1.175

1.301

1.428

1.555

1.110

1.234

1.360

1.484

1.610

All dimensions for reference only.

30

PT02 SE (MS3122)

SP02 SE

box mounting receptacle

S

L

R

M

(TP)

K

R

S

A

N

(TP)

T Dia.

D

4 Holes

PT02SE-XX-XXX

SP02SE-XX-XXX

MS3122E-XX-XXX

To complete part number see how to order on page 36.

n

(MMC) located within .0025 of (TP)

Receptacle Front View

Receptacle Side View

T

M

+.010

–.000

A

Dia.

+.001

N

Dia.

+.011

–.000

S

Max.

Dia.

±.005

D

Max.

R

Shell

Size

K

±.016

L

Max.

PT

SP

PT

SP

PT

SP

–

–.005

PT

SP

PT

SP

8

10

12

14

16

18

20

22

24

.594

–

.828

.954

–

.120

.147

.473

.312

.406

–

.062

.094

1.296

1.358

.431

.556

.589

–

.438

.562

.719

.812

.938

1.031

1.125

1.203

1.297

1.375

1.500

1.141

1.266

1.360

1.453

1.532

1.688

1.766

1.891

.150

.590

.219

.344

.462

.556

.589

.812

1.047

1.141

1.234

1.328

1.453

1.578

1.703

.750

.688

.906

.875

.812

.969

1.000

1.125

1.250

1.375

1.500

.938

1.062

1.156

1.250

1.375

1.062

1.188

1.312

1.438

All dimensions for reference only.

31

MF02 SE (MS3127)

box mounting receptacle

T¹ Dia.

4 Holes

S

L

R¹

(

TP)

M

R

K

(TP)

R

R¹

S

A

N

(

TP) (TP)

T Dia.

D

4 Holes

MF02SE-XX-XXX

MS3127E-XX-XXX

To complete part number see how to order on page 36.

(MMC) located within .0025 of (TP)

n

Receptacle Front View

Receptacle Side View

N

Dia.

+.011

–.000

A

Dia.

+.001

–.005

M

+.010

–.000

Shell

Size

S

Max.

T

T¹

±.005

D

K

±.016

L

R

R¹

±.005

Max.

.219

.344

Max.

1.266

1.328

10

12

14

16

18

20

22

24

.562

.688

.719

.812

1.141

1.266

1.360

1.453

1.532

1.688

1.766

1.891

.120

.147

.150

.590

.750

.062

.094

.462

.556

.589

.812

.938

.812

.906

1.031

1.125

1.203

1.297

1.375

1.500

.875

.938

.969

1.000

1.125

1.250

1.375

1.500

1.062

1.188

1.312

1.438

1.062

1.156

1.250

1.375

All dimensions for reference only.

32

PT06 SE (MS3126)

SP06 SE

straight plug

S

TERMINATION ASSEMBLIES

“SE” (SR), MS / “F” Strain Relief

“SE”, MS / “E” Open Wire Seal

“SP”, MS / “P” Potting Boot

L

N

G N

D N

Z pin contacts

Z¹ socket contacts

PT06SE-XX-XXX

SP06SE-XX-XXX

PTG06SE-XX-XXX

MS3126E-XX-XXX

PT06SE-XX-XXX (SR)

SP06SE-XX-XXX (SR)

PTG06SE-XX-XXX (SR)

MS3126F-XX-XXX

PT06SP-XX-XXX

SP06SP-XX-XXX

PTG06SP-XX-XXX

MS3126P-XX-XXX

To complete part number see how to order on page 36.

Plug

Front View

Plug

Side View

Class “SE”, MS / “E”

Class “SE” (SR), MS / “F”

Class “SP”, MS / “P”

Shell

Size

S Dia.

Max.

Z

Z¹

±.045

L

Max.

N

Max.

G

Dia.

L

Max.

N

Max.

D

Dia.

L

Max.

N Dia.

Max.

±.045

8*

10

12

14

16

18

20

22

24

.734

.859

.640

.579

1.328

1.297

1.359

.540

.685

.125

.188

.312

.375

.500

.625

.750

.800

2.413

2.528

2.753

2.830

.828

.891

.327

.444

1.750

1.766

.578

.734

1.031

1.156

1.281

1.391

1.531

1.656

1.777

.813

1.016

1.141

1.203

1.469

1.656

1.750

.558

.858

.930

.683

.984

1.057

1.175

1.301

1.428

1.533

.808

1.110

1.234

1.360

1.484

1.610

.909

1.034

1.159

1.284

* PT-SE, MS-SE and MS-SP only.

All dimensions for reference only.

33

PT07 SE (MS3124)

SP07 SE

jam nut receptacle

S

H

S

TERMINATION ASSEMBLIES

“SE” (SR), MS / “F” Strain Relief

“SE”, MS / “E” Open Wire Seal

“SP”, MS / “P” Potting Boot

L

M

K

M

K

M

K

R

J

N

J

F

N

J

A

G N

A

R

P

PT07SE-XX-XXX

SP07SE-XX-XXX

MS3124E-XX-XXX

PT07SE-XX-XXX (SR)

SP07SE-XX-XXX (SR)

MS3124F-XX-XXX

PT07SP-XX-XXX

SP07SP-XX-XXX

MS3124P-XX-XXX

To complete part number see how to order on page 36.

All lockwire holes are .044 Dia. Min.

Receptacle Front View

Receptacle Side View

P

A Dia.

+.001

–.005

.473

.590

.750

.875

1.000

1.125

1.250

1.375

1.500

J Flat

+.000

–.010

.530

.655

.818

K

+.011

–.010

R

Panel Thickness

Shell

Size

H Hex

Max.

S

Max.

M

±.005

Thread

Class 2A

.5625-24 UNEF

.6875-24 NEF

.8750-20 UNEF

1.0000-20 UNEF

1.1250-18 NEF

1.2500-18 NEF

1.3750-18 NEF

1.5000-18 NEF

1.6250-18 NEF

Min.

.062

Max.

.125

.250

8

10

12

14

16

18

20

22

24

.767

.892

.954

1.078

1.266

1.391

1.516

1.641

1.828

1.954

2.078

.125

.156

.696

.884

.917

1.079

1.205

1.329

1.455

1.579

1.705

1.829

.942

1.066

1.191

1.316

1.441

1.566

Class “SE”, MS / “E”

Class “SE” (SR), MS / “F”

Class “SP”, MS /”P”

N Dia.

Shell

Size

L

N

Max.

F

Min.

G Dia.

Free

L

Max.

N

Max.

G

Dia.

L

Max.

8

10

12

14

16

18

20

22

24

1.438

1.625

1.688

.749

.874

.999

1.124

1.249

1.374

1.530

1.655

1.780

.234

.297

.422

.547

.609

.734

.922

.984

.125

.188

.312

.375

.500

.625

.750

.800

1.922

2.000

2.172

2.234

.828

.891

–

.444

.558

.683

.808

.909

1.034

1.159

1.284

1.656

1.922

1.951

.734

.858

.984

1.110

1.234

1.360

1.484

1.610

1.016

1.141

1.203

1.469

1.656

1.750

All dimensions for reference only.

34

PT08 SE

SP08 SE

90 degree plug

G

TERMINATION ASSEMBLIES

“SE” Open Wire Seal, “SE” (SR) Strain Relief

“SP” Potting Boot 75 degrees

L

E

B

A

K

PT08SE-XX-XXX

SP08SE-XX-XXX

PT08SE-XX-XXX (SR)

SP08SE-XX-XXX (SR)

H

D

PT08SP-XX-XXX

SP08SP-XX-XXX

C

To complete part number see how to order on page 36.

All lockwire holes are .044 Dia. Min.

Plug

Front View

Plug

Side View

Class “SE”, “SE” (SR)

Class “SP”

H

G

Dia.

Max.

C

+.010

–.025

E

+.047

–.025

Shell

Size

B

±.031

D

±.062

L

Max.

A

±.025

K

L

Max.

±.015

.438

.516

.625

.656

.703

.766

.812

.918

±.015

10

12

14

16

18

20

22

24

.921

1.046

1.171

1.297

1.422

1.562

1.672

1.797

.749

.812

.170

.264

.310

.330

.444

.510

.515

.656

1.191

1.254

1.316

1.562

1.625

1.719

1.750

.393

.450

.519

.583

.621

.683

.739

.787

2.137

2.222

2.370

2.572

2.680

2.753

2.799

3.037

.547

.625

.734

.750

.781

.859

.906

1.181

.562

2.031

2.093

2.203

2.250

2.296

2.343

2.390

2.624

.688

.905

.781

1.030

1.015

1.077

1.139

1.250

.890

1.000

1.125

1.234

1.374

All dimensions for reference only.

35

PT-SE, SP-SE, MS/PT-SE

how to order

PT-SE, SP-SE

To more easily illustrate ordering procedure, part number PT00SE-20-

41PW(SR) is shown as follows:

MS/PT-SE

MIL-DTL-26482, Series 1

To more easily illustrate ordering procedure, part number

MS3120E20-41PW is shown as follows:

PT

00

SE - 20 - 41

P

W

(SR)

MS

312

0

E

20 – 41

P

W

1

2

3

4

5

6

7

8

See code below:

1

2

3

4

5

6

7

8

1. Connector Type

See code below:

1. “MS” designates Military Standard

2. Speciﬁcation Number

“312” designates basic family for MIL-DTL-26482, Series 1

crimp type

3. Shell Style

“PT” designates standard olive drab, electrically conductive cadmium

plated, bayonet lock connector with crimp contacts

“MF” designates standard olive drab, electrically conductive cadmium

plated, bayonet lock connector with dual mounting holes, and

crimp contacts

“SP” designates electrically non-conductive, hard anodic coated,

bayonet lock connector with larger ﬂange and mounting holes

for back panel mounting, and crimp contacts

“0”

“1”

“2”

“4”

“6”

“7”

designates wall mounting receptacle

designates cable connecting receptacle*

designates box mounting receptacle

designates jam nut receptacle

designates straight plug

“PTG” designates plug with grounding ﬁngers

2. Shell Style

“00”

“01”

“02”

“06”

“07”

“08”

designates wall mounting receptacle

designates cable connecting receptacle*

designates box mounting receptacle

designates straight plug

designates jam nut receptacle

designates 90 degree plug

designates box mounting receptacle with dual

mounting holes

“8”

designates wall mounting receptacle with dual

mounting holes

4. Service Class

“E”

“F”

designates environmental resisting connector

designates environmental resisting connector with

strain relief

3. Service Classes

“SE” designates environmental crimp

“SP” designates potted type crimp

Both of the above are Amphenol proprietary versions of the MIL-

DTL-26482, Series 1 crimp contact connector and offer 15 lbs. contact

retention for size 20 contacts; 25 lbs. for size 16 contacts.

“PG” designates adapter for cable gland for moisture prooﬁng

jacketed cables

“P”

designates potted type with potting boot

5. Shell Size

“20” designates shell size. Shell sizes 8 through 24 available

6. Insert Arrangement

Refer to pages 4-10 for insert availability.

“20 - 41” designates insert arrangement. (The number

following the hyphen is the number only that is used in the part

number).

4. Shell Size

“20” designates shell size. Shell sizes 8 through 24 available.

5. Insert Arrangement

Refer to pages 4-10 for insert availability.

“20 - 41” designates insert arrangement. (The number following the

hyphen is the number only that is used in the part number).

6. Contacts

“P” designates pin contacts

“S” designates socket contacts

7. Insert Rotation

7. Contacts

“P” designates pin contacts

“S” designates socket contacts

8. Insert Rotation

Refer to page 6.

“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell

from the “normal” position. No letter required for normal (no

rotation) position.

Refer to page 6.

“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “normal”

position. No letter required for normal (no rotation) position.

8. “SR” designates a strain relief clamp.

Indicate optional ﬁnishes as follows:

*

This connector style is sometimes referred to as a cable connecting

“plug”. It does, however, mate with either a straight or 90 degree plug.

(003) olive drab cadmium plate (standard on “PT”)

OR

RoHS Compliant ﬁnish sufﬁx as follow:

(005) anodic coating - Alumilite^®(standard on “SP”)

(023) electroless nickel

(025) black zinc cobalt plating

(072) conductive gray zinc nickel plating

(424) electroless nickel ﬁnish with strain relief

(470) black zinc cobalt plating with strain relief

36

PT & SP

accessories – sealing plugs, ﬂange gaskets,

potting boots

SEALING PLUGS – FOR PT & SP

®

Amphenol

Part

Number

A

Dia.

±.010

.121

.083

.060

B

Dia.

±.005

.171

.133

.090

C

B

DIA

Contact

Size

12

16

20

MS

Number

C

±.010

Color

Code

.135 +.030

–.025

10-405996-12 MS27488-12

10-405996-16 MS27488-16

10-405996-20 MS27488-20

.564

Yellow

Blue

Red

A

DIA

How to Order: Order by 10- (Proprietary) or MS part number as shown in chart above.

SEALING PLUG

MS27488-XX

10-405996-XX

MOUNTING FLANGE GASKETS – FOR PT & SP

PT & SP

10-101949

10-150949

S

F

PT

10-101949

SP

10-150949

F

Shell

Size

R

±.010

S

±.010

R

±.010

S

±.010

+.016

–.000

T

±.008

R

S

6

8

.469

.594

.719

.813

.906

.969

1.063

1.156

1.250

1.375

.688

.812

.938

1.031

1.125

1.219

1.312

1.438

1.563

1.688

.641

.734

.812

.938

1.031

1.125

1.203

1.297

1.375

1.500

.953

1.047

1.125

1.250

1.344

1.438

1.516

1.672

1.750

1.875

.375

.500

.625

.750

.875

1.000

1.125

1.250

1.375

1.500

.024

10

12

14

16

18

20

22

24

T

R

MOUNTING FLANGE GASKET

10-101949-XX

10-150949-XX

How to Order: For PT: 10-101949-XX (complete order number with desired shell size).

For SP: 10-150949-XX (complete order number with desired shell size).

75° POTTING BOOTS – FOR PT & SP

B

E

Shell

Size

B

Max.

D

±.015

E

±.015

L

Max.

8

10

12

14

16

18

20

22

24

.433

.493

.552

.643

.658

.689

.750

.794

1.070

.312

.438

.516

.625

.656

.703

.766

.812

.918

.438

.562

.688

.781

.890

1.000

1.125

1.234

1.374

.766

.830

.861

.916

.936

D

L

.959

1.052

1.073

1.310

75° POTTING BOOT

10-101988-XX

How to Order: 10-101988-XX (complete order number with desired shell size).

All dimensions for reference only.

37

PT & SP

accessories – clamps

CLASS “E” STRAIN RELIEF CLAMP – FOR PT & SP

Shell

Size

B

Max.

C Thread

Class 2B

D

Min.

G

Max.

L

Max.

L

8

10

12

14

16

18

20

22

24

.550

.675

.803

6-32 NC

8-32 NC

.240

.302

.428

.552

.615

.740

.928

.812

.875

.930

1.000

1.125

1.188

1.438

1.719

B

D G

.920

.930

1.047

1.165

1.291

1.418

1.533

1.062

1.093

C

CLASS “E” STRAIN RELIEF CLAMP

10-101971-XX

How to Order: 10-101971-XX X

Add desired

†

Add desired ﬁnish sufﬁx

shell size

“3” designates olive drab cadmium

“5” designates Alumilite^®

Not for use with jam nut style connectors.

CLASSES “A” & “P” STRAIN RELIEF CLAMP – FOR PT & SP

L

C

L

Shell

Size

B

Max.

Thread

Class 2B

D

Min.

G

Max.

+.010

–.020

8

10

12

14

16

18

20

22

24

.540

.665

.793

6-32 NC

8-32 NC

.240

.302

.428

.552

.614

.740

.928

.938

.812

.875

.843

.975

B

D G

1.000

1.125

1.188

1.438

1.719

.910

1.037

1.155

1.281

1.408

1.533

C

.975

1.007

CLASSES “A” & “P” STRAIN

RELIEF CLAMP

10-101980-XX

How to Order: 10-101980-XX X

Add desired

†

Add desired ﬁnish sufﬁx

shell size

“3” designates olive drab cadmium

“5” designates Alumilite^®

Not for use with jam nut style connectors.

CLASS “A” CABLE CLAMPS – FOR PT & SP

®

Shell

Size

Amphenol

A

±.031

B

Max.

C

V

V Thread

Part Number

Dia. Min.

Thread

10

12

14

16

18/20

22/24

97-3057-1004

97-3057-1007

97-3057-1008

97-3057-1010

97-3057-1012

97-3057-1016

.795

.850

.920

.927

1.015

.842

.995

1.120

1.216

1.403

1.683

.3125

.4375

.5625

.6250

.7500

.9375

.6250-24

.7500-20

.8750-20

1.0000-20

1.1875-18

1.4375-18

B

How to Order: Order by 97-3057-XXXX number listed above. Standard ﬁnish is olive

drab zinc alloy. Consult Amphenol, Sidney, NY for alternate ﬁnishes.

C

A

†

Standard accessory ﬁnishes are “3” olive drab cadmium for PT and MS/PT types,

“5” Alumilite^®for SP types. Electroless nickel plating is also available on some

items; consult Amphenol, Sidney, NY

CLASS “A” CABLE CLAMP

97-3057-XXXX

All dimensions for reference only.

38

PT, SP, MS/PT

accessories – protection caps

RECEPTACLE PROTECTION CAPS – FOR PT, SP, MS/PT

C

B

B Dia.

+.010

–.000

.328

C Dia.

+.010

–.000

.454

G

L

X

Shell

Size

6

Dia.

Max.

.577

+.020

–.000

.563

Std. & MS

RA, CA, NA RAL/CAL/NAL

MS only

L

3.000

3.500

4.000

5.000

8

10

12

14

16

18

20

22

24

.454

.578

.703

.844

.969

1.094

1.219

1.343

1.453

.578

.703

.891

1.016

1.141

1.266

1.391

1.516

1.614

.706

.816

.563

.603

G

1.000

1.128

1.257

1.367

1.496

1.624

1.747

X

RECEPTACLE PROTECTION CAP

FOR PT, SP, MS/PT CONNECTORS

How to Order Proprietary Receptacle Caps:

Wall Receptacle Caps:

10-101960- XX X

10-101960-XXX

MS3181-XXX

(Wall Receptacle)

10-101961-XXX

(Cable Connecting

Receptacle)

10-101964-XXX

MS3181-XXX

(Jam Nut Receptacle)

Cable Connecting Receptacle Caps: 10-101961- XX X

Jam Nut Receptacle Caps:

10-101964- XX X

Add desired shell size

Add desired ﬁnish sufﬁx^†

“FL” designates gray zinc nickel

“3” designates olive drab cadmium

“5” designates Alumilite^®

Proprietary caps are supplied with standard bead chains only (as shown in drawing

at left). For other chain options, an MS version cap should be ordered.

How to Order MS Version Receptacle Caps:

Wall Receptacle Caps:

MS3181- XX -CA for sash chain

-CAL for long sash chain

-RA for rope chain

-RAL for long rope chain

Jam Nut Recept. Caps:

MS3181- XX -NA for sash chain

-NAL for long sash chain

Shell size

MS versions are supplied with standard anodize ﬁnish only. For other ﬁnish options

a proprietary cap should be ordered.

PLUG PROTECTION CAPS – FOR PT, SP, MS/PT

N Dia.

+.001

–.005

.348

L Dia.

+.025

–.015

.532

X

L

Shell

Size

6

Std. & MS

CA, RA

3.000

MS only

CAL/RAL

5.000

8

10

12

14

16

18

20

22

24

.473

.590

.750

.532

.594

.627

3.000

3.500

4.000

5.000

N

.875

X

1.000

1.125

1.250

1.375

1.500

PLUG PROTECTION CAP

FOR PT, SP, MS/PT CONNECTORS

MS3180-XXX

10-101957-XXX

How to Order Proprietary Plug Caps: 10-101957-XX X

Add desired shell size

Add desired ﬁnish sufﬁx^†

“FL” designates gray zinc nickel

“3” designates olive drab cadmium

“5” designates Alumilite^®

†

Standard accessory ﬁnishes are “3” olive drab cadmium for PT and

MS/PT types, “5” Alumilite^®for SP types. Electroless nickel plating is

also available on some items; consult Amphenol, Sidney, NY

Proprietary caps are supplied with standard bead chains only (as shown in drawing

at left). For other chain options an MS version cap should be ordered.

How to Order MS Version Plug Caps: MS3180- XX -CA for sash chain

-CAL for long sash chain

All dimensions for reference only.

Shell size

-RA for rope chain

-RAL for long rope chain

39

PT & SP

accessories – dummy receptacles, “O” rings,

plastic dust caps

DUMMY RECEPTACLES – FOR PT, SP, MS/PT

S

S¹

Proprietary Version

MS Version

M

+.030

–.000

N

+.001

–.005

.473

.590

.750

M

Shell

Size

K

±.010

R

±.005

S

±.010

R¹

S¹

R

R¹

(TP)

K

8

10

12

14

16

18

20

22

24

.062

.462

.556

.589

.734

.812

.938

1.031

1.125

1.203

1.297

1.375

1.500

1.047

1.125

1.250

1.344

1.438

1.516

1.672

1.750

1.875

.594

.719

.828

.954

.812

.906

.969

1.062

1.156

1.250

1.375

1.047

1.141

1.234

1.328

1.453

1.578

1.703

R

S

.875

N

R¹ S¹

1.000

1.125

1.250

1.375

1.500

DUMMY RECEPTACLE

FOR PT, SP, MS/PT CONNECTORS

MS3115-XXX

How to Order Proprietary Dummy Receptacles:

10-150921-XX X

Add desired shell size

Add desired ﬁnish sufﬁx^†

10-150921-XXX

“FL” designates gray zinc nickel

“3” designates olive drab cadmium

“5” designates Alumilite^®

How to Order MS Version Dummy Receptacles: MS3115-XX X

Add desired shell size

Add desired ﬁnish sufﬁx^†

-A designates Alumilite^®

-L designates electroless nickel

-W designates olive drab cadmium

PLASTIC DUST CAPS

FOR PT, SP

How to Order Plastic Dust Caps:

Shell

Size

Plug

Plastic Dust Cap

Receptacle

To the basic order number add the dust cap size to

match connector plug or receptacle shell size, as

shown in the tables above.

Example: 10-70506-12 would be the correct order

number for a plastic dust cap for a PT00 receptacle,

shell size 10.

Plastic Dust Cap

10-70506-8S

10-70506-10

10-70506-12

10-70506-14

10-70506-16

10-70506-18

10-70506-20

10-79506-22

10-70506-24

10-70524-1

6

8

10-70500-8

10-70506-12

10-70500-12

10-70506-16

10-70506-18

10-70506-20

10-70506-22

10-70506-24

10-70524-1

10-70506-28

10

12

14

16

18

20

22

24

All dimensions for reference only.

40

PT accessories

glands

Nylon Cable Glands

Metal Cable Glands

Material:

Nylon 66 (UL Approved 94V-2)

UL 94V-2(UL Approved 94V-2)

Metric , PG, NPT

Material:

Clamping:

Seal Ring:

Brass with Nickel; Brass with Tin/Nickel

ULꢀapproved PA6, 94V-0

UL 94V-2 (UL approved NBR, 94V-2;UL approved

DOW CORNING RUBBER, 94V-0

Metric, PG, NPT

IP68 (tighten with o-ring)

- 40°C ∼ +100°C

Seal Ring:

Thread Type:

Temp Range:

Dynamic:

Short Term:

Current Colors: Gray, Black

Static:

- 40°C ∼ +100°C

- 20°C ∼ + 80°C

+120°C

Thread Type:

Protective:

Temp Range:

Torque Value (N-M) to tighten the fitting to the flexible cord: 6.25N-M

Torque Value (N-M) to tighten the fitting to the threaded hub: 4.17N-M

Torque Value (N-M) of hex and cap nuts: 3.0-4.5 N-M

M12, M16, M20 are UL recognized under ﬁle # E339605

M12, M16, M20 are UL recognized under file # E339605

Nylon Cable Glands

Metal Cable Glands

Max ”d” Cable Range Thread “L” Clamp ”H” Spanner "S"

AIGO Part

Thread “A”

AIGO Part

Thread “A”

(mm)

8

(mm)

3 – 6.5

4 – 8

(mm)

8

(mm)

20

22

25

30

33

38

39

48

50

75

28

32

4560

5206

267

2373

3438

48

4785

7250

202

224

246

268

2383

338

348

4582

(mm)

15

19

22

24

27

33

42

54

60

80

24

33

54

524

2343

3432

4524

54

5840

8105

159

1292

224

247

2373

3432

4524

5640

(mm)

6.5

8

(mm)

3 – 6.5

4 – 8

(mm)

6.2

5

(mm)

15

19

20

24

23

26

27

34

39

43

47

57

25

26

41

46

58

24

27

34

39

44

47

18

21

20

24

25

26

38

42

44

(mm)

14

15

18

22

24

27

30

32

40

50

60

67

75

90

100

24

30

50

65

80

100

24

30

40

50

65

82

14

18

22

24

30

50

60

65

AIO-CSM12

M12x1.5

M16x1.5

M18 1.5

M20 1.5

M22 1.5

M24 1.5

M25x1.5

M30 2.0

M32 1.5

M33 2.0

M40 1.5

M50 1.5

M72 2.0

NPT1/2”

NPT3/4”

NPT1”1/42”

NPGT11/”21”/2”

G13/24”

AIO-CSJM12

AIO-CSJM14

AIO-CSJM16

AIO-CSJM18

AIO-CSJM20

AIO-CSJM22

AIO-CSJM24

AIO-CSJM25

AIO-CSJM27

AIO-CSJM30

AIO-CSJM32

AIO-CSJM36

AIO-CSJM40

AIO-CSJM50

AIO-CSJM63

AIO-CSJM72

AIO-CSJM80

AIO-CSJM90

AIO-CSJIN1/2

AIO-CSJIN3/4

AIO-CSJIN5/4

AIO-CSJIN3/2

AIO-CSJIN2

M12x1.5

M14x1.5

M16x1.5

M18x1.5

M20x1.5

M22 1.5

M24 1.5

M25x1.5

M27 2.0

M30 2.0

M32 1.5

M36 2.0

M40 1.5

M50 1.5

M63 1.5

M72 2.0

M80 2.0

M90 2.0

NPT1/2”

NPT3/4”

NPT1”1/4”

NPT1”1/2”

NPT2”

NPT2 1/2”

NPT3”

G1/2”

G3/4”

G1”

G1”1/4”

G1”1/2”

G2”

G2 1/2”

PG7

AIO-CSM16

AIO-CSM18

AIO-CSM20

AIO-CSM22

AIO-CSM24

AIO-CSM25

AIO-CSM30

AIO-CSM32

AIO-CSM33

AIO-CSM40

AIO-CSM50

AIO-CSM72

AIO-CSIN1/2

AIO-CSIN3/4

AIO-CSIN53/42

AIO-CSIGNI3N/12/2

AIO-CSGIN13/24

AIO-CSGIN31/4

AIO-CSGIN15/4

AIO-CSGIN53/42

AIO-CSGIN35/2

AIO-CSGPGIN75/2

AIO-CSPG79

AIO-CSPG911

AIO-CSPG113.5

AIO-CSPG136.5

AIO-CSPG1261

AIO-CSPG219

AIO-CSPG2396

AIO-CSPG3462

8

10

12

14

18

25

32

38

57

12

18

32

312

128

1285

258

2382

3527

65.75

68.5

180

102

124

148

1285

2352

328

5 – 10

9

6 – 9

5 – 10

6.3

7

6 – 12

9

10

12

14

18

25

32

38

44

52

60

70

12

18

32

44

52

70

12

18

25

32

44

52

6.5

8

10 – 14

13 – 18

18 – 25

22 – 32

32 – 38

51 – 57

6 – 12

13 – 18

22 – 32

262––1322

163––1128

138 – 1285

1281 – 258

212 – 2382

2521 – 3527

531––65.57

34––68.5

54––180

10

11

13

14

16

13.6

14.1

17.3

179.3

191

11

113

13

134

184

8

6 – 12

8.3

8

7.8

8

10 – 14

13 – 18

18 – 25

22 – 32

32 – 38

37 – 44

46 – 52

52 – 60

62 – 70

6 – 12

13 – 18

22 – 32

37 – 44

46 – 52

62 – 70

6 – 12

10

11

12

16

20

13.6

14.1

17.3

17.7

23.7

26

8

GG31/4””

G1G”1”/4”

G1”1/42”

G12”1/2”

GP2”G17/2”

PG79

AIO-CSJIN5/2

AIO-CSJIN3

PPGG191

8

PPGG1131.5

PPGG1136.5

PG1261

PG219

PG2396

65 – 1102

89

AIO-CSJGIN1/2

AIO-CSJGIN3/4

AIO-CSJGIN1

AIO-CSJGIN5/4

AIO-CSJGIN3/2

AIO-CSJGIN2

AIO-CSJGIN5/2

AIO-CSJPG7

AIO-CSJPG9

AIO-CSJPG11

AIO-CSJPG13.5

AIO-CSJPG16

AIO-CSJPG21

AIO-CSJPG36

AIO-CSJPG42

AIO-CSJPG48

160––1124

130 – 1148

138 – 1285

1282 – 2352

232 – 328

190

110

11

113

134

13 – 18

18 – 25

22 – 32

37 – 44

46 – 52

3 – 6.5

4 – 8

8

10

12

16

6

PG3462

For additional information on other products available

refer to our Cord Grips & Cable Glands, Catalog 12-055.

PG9

7

PG11

PG13.5

PG16

PG21

PG36

10

12

14

18

32

38

44

5 – 10

7

6 – 12

8

10 – 14

13 – 18

22 – 32

32 – 38

37 – 44

8

10

11

12

PG42

PG48

41

Application Tools

“SE”

The following data includes information pertaining to the application tools for crimping,

®

inserting and removing size 20, 16, and 12 contacts incorporated in Amphenol Miniature

Cylindrical Connectors.

All crimping tools included are the “full cycling” type, and when used as speciﬁed by the

manufacturer, provide reliable crimped wire to contact termination.

Tool frames and turret heads are available from approved tool manufacturers; consult

Amphenol, Sidney, NY for listings.

Assembly instructions are available online at www.amphenol-industrial.com

See the following:

L-786 for SE assembly instructions

L-555 for solder type instructions

CRIMPING TOOLS

FOR PT-SE, SP-SE, MS/PT-SE

(MIL-DTL-26482, Series 1) Connectors

MS Tool Part Number

Contact

Size

Tool Frame

M22520/1-01

Turret Head

M22520/1-02

20

16

12

INSERTION/REMOVAL TOOLS

FOR PT-SE, SP-SE, MS/PT-SE

(MIL-DTL-26482, Series 1) Connectors

Insertion Tool

Removal Tool

MS

Part Number

Contact

®

Amphenol

Contact

Amphenol

Contact

Amphenol

Contact

Part Number

Contact

Size

Insertion Pliers Insertion Tool

Insertion Tool Removal Tool Removal Tool

20

16

12

11-8107-20

11-8107-16

–

11-7401-20

11-7401-16

–

M81969/17-03

M81969/17-04

M81969/17-05

11-7880-20

11-7880-16

–

M81969/19-07

M81969/19-08

M81969/19-09

42

Contacts - Power and Thermocouple Crimp

for miniature cylindrical connectors

The following tables provide part number information for crimp contacts

®

used in Amphenol Miniature Cylindrical Connectors. For additional infor-

mation, consult Amphenol, Sidney, NY.

CRIMP CONTACTS for MIL-DTL-26482, Series 1

(PT-SE, SP-SE) Connectors

Pins

Sockets

Amphenol

®

Amphenol

Contact Accommodates

Size Wire Size

Proprietary

Number

Proprietary

Number

MS Number

20

20, 22 & 24 AWG M39029/31-240 10-683787-20P M39029/32-259 10-731210-3D1

16, 18 & 20 AWG M39029/31-228 10-683788-16P M39029/32-247 10-679379-16D

16

12

12 & 14 AWG

16 AWG

M39029/31-235 10-807100-125 M39029/32-254 10-807103-125

20-16

16-20

12-10

10-330930-20F

10-330932-16F

10-330938-12F

10-807155-205

10-330933-16F

10-330939-12F

20 AWG

12 AWG

THERMOCOUPLE CONTACTS for Miniature Connectors

Pins

Sockets

Proprietary Part Number

Size

Material

SE

Chromel

10-330940-21P

10-330940-21S

16 Crimp

Termination

Alumel

Chromel

Alumel

Iron

10-330940-22P

10-330940-1P

10-330940-2P

10-330940-3P

10-330940-4P

10-330940-22S

10-330940-1S

10-330940-2S

10-330940-3S

10-330940-4S

20 Crimp

Termination

Constantan

See L-776 for thermocouple contact termination instructions. These are online at www.amphenol-industrial.com

For PCB contacts for miniature connectors, see page 20.

43

Coaxial Contacts

for miniature cylindrical connectors

®

Amphenol Miniature Connectors can incorporate shielded coax contacts. The

Miniature family is built around MIL-DTL-26482 speciﬁcations, with Mil-

approved and proprietary styles offered. Normal operating voltage for

Miniature cylindricals with power only contacts is up to 1,000 VAC (RMS) at

sea level.

Table 1: Miniature Cylindricals offer these features for contact

termination

ﬂexibility:

Solder Coax Contact

for use in Miniature Solder Type Connectors

•

Several insert arrangements that can incorporate:

• Size 8 & 12 Crimp Coax contacts for Crimp type

• Size 8 & 12 Solder Coax contacts for Solder type

Wide selection of connector shell styles and sizes

Standard power contact options within the various connector styles

include: solder type, crimp front release, crimp rear release

Coax contacts are designed to the same high performance standards as

power contacts. Coax and power contacts may be intermixed with no

degradation of connector reliability.

•

Pin Crimp Coax Contact

for use in Miniature Crimp SE Type Connectors

No mis-mating or cross-plugging with insert rotation and keyway

polarization.

Table 2: GENERAL ORDERING INFORMATION

Amphenol Miniature Cylindricals are normally supplied with a full complement

of power contacts, separately packaged. Coax contacts are ordered by part

number as referenced in the part number charts on the following pages of this

catalog, and are substituted for the power contacts at the time of the cable or

equipment assembly. If the application is for coax only, the connector may be

ordered less contacts and no power contacts will be supplied.

Socket Crimp Coax Contact

Installation instructions for the coax contacts for Miniature Connectors are

provided in Amphenol documents as follows: L-633 for solder type; L-613 for

SE type.

for use in Miniature Crimp SE Type Connectors

HOW TO ORDER:

A. Select the coax contacts designed for the cable being used from the

applicable charts in this catalog for each Miniature type (solder, SE).

B. Select a connector insert from those shown on pages 4-5 which will

accommodate the quantity and size of coaxial contacts needed plus any

power contacts required. Note: Size 8S and 12S contacts are used with

connector inserts through shell size 18 only. For larger connector shell

sizes, use size 8L contacts.

C. Determine the Miniature Cylindrical type, shell style, ﬁnish, service class

and insert rotation required for your application.

D. Consult Amphenol, Sidney NY with the pertinent cable, contact, insert

arrangement and connector style choices for complete connector

part number.

44

Coaxial Contacts

for miniature cylindrical connectors, cont.

®

Amphenol Coaxial Contacts designed for use in Miniature Cylindrical Connectors

offer the same durability advantages and design beneﬁts for reliable interconnection as the

Amphenol coax contacts used in high performance D38999 connectors. A variety of military and

commercial shielded cables are accommodated within the miniature cylindrical series.

Amphenol supplies coax contacts for solder and crimp SE connector styles.

Other features of the coax for miniature cylindricals include:

•

Miniature coax design has an outside nut within the

assembly for fast, reliable assembly of contact to cable.

TYPICAL MINIATURE CRIMP COAX

SOCKET CONTACT has crimp socket outer

contact with a solder pin inner contact

All types feature solder style inner contacts and crimp

style outer contacts for reliable cable termination

Miniature coax crimp type contacts are designed for use

in Miniature crimp series connectors

Miniature coax solder type contacts are designed for

use in Miniature solder series connectors. These

come pre-installed into the solder connector.

TYPICAL ELECTRICAL PERFORMANCE

Size 8 and 12 Coax Contacts

Contact Resistance:

Center @ 1 Amp, 170 millivolts max. voltage drop @ 25°C

Outer @ 12 Amps, 150 millivolts max. voltage drop @ 25°C

TYPICAL MINIATURE CRIMP COAX PIN

CONTACT has crimp pin outer contact

with a solder socket inner contact

Dielectric Withstanding Voltage:

Size 8: 1,300 VAC Rms @ sea level

Size 12: 1,000 VAC Rms @ sea level

Size 8 & 12: 250 VAC Rms @ 50,000 ft.

Insulation Resistance

5,000 megohms minimum @ 25°C

Typical VSWR for size 8 & 12 PT-SE Types II & III only:

1.2 + .12F (GHz) up to 10 GHz

EXPLANATION OF TYPE CLASSIFICATIONS:

PT-SE Type I is moisture seal design with internal O-ring.

PT-SE Type II is 50 ohm impedance matched version. Contacts

terminated to other than 50 ohm cables are therefore not matched.

PT-SE Type III is 50 ohm contact, non-serviceable after assembly.

Solders are non-impedance matched contacts.

CONTACT FINISHES:

Sufﬁx

Finish

1

2

3

4

5

E

F

H

0.00020 min. silver over copper ﬂash

0.00005 min. gold (Knoop hardness 130-200) over silver

0.00010 min. gold (Knoop hardness 130-200) over silver

0.00010 min. gold (Knoop hardness 130-200) over copper

0.00005 min. gold (Knoop hardness 130-200) over nickel

0.00005 min. gold (Knoop hardness 90 max.) over copper

0.00005 min. gold (Knoop hardness 130-200) over copper

0.00010 min. gold (Knoop hardness 130-200) over copper

45

Coaxial Contacts

for miniature cylindrical connectors, cont.

solder (MIL-DTL-26482 Series 1 type) - application data

MATING

PIN DIA

H

L

F

G

SOCKET

L

H

F

MATING

PIN DIA

G

NOTE: All contacts of the same size and the same inner and

outer contact diameters (G & H) will mate with each other.

SOLDER COAX CONTACTS

For use in Miniature Solder Type Connectors: PT, SP, and MS/PT Styles

Dimensional Data

(See Drawings above)

Contact Part Number

Crimp Ferrule Tools

L

Retainer

Nut

Contact

Size

Length Ref.

F

Cable

H

Dia.

±0.001

G

Dia.

Across

Flats

±0.004

MIL-T-22910/7-1 MIL-C-22520/5-01 MIL-C-22520/10-01 Wrench

Tool

Socket

Pin Socket

Use with Die Part Use with Die Part Use with Die Part

Number

RG-58C/U,

RG-141A/U,

RG-303/U

0.040

± 0.001

M22520/5-05 (B)

M22520/5-41 (B)

21-33020-2

21-33019-2

8S

0.219

0.280

1.114

1.115

M22910/7-15 (B)

M22520/10-07 (B)

11-8676-2

0.040

± 0.001

RG-59B/U,

RG-62A/U,

RG-62B/U,

RG-210/U

21-33020-1

21-33020-3

21-33019-1

21-33019-3

8L

8S

0.219

0.280

1.176

1.114

1.177

1.115

M22910/7-18 (B)

M22910/7-16 (B)

M22520/5-45 (B)

M22520/5-43 (B)

11-8676-3

11-8676-2

0.040

± 0.001

RG-142B/U,

Times MI51115

0.040

± 0.001

21-33020-7* 21-33019-7*

21-33020-32* 21-33019-32*

21-33020-4 21-33019-4*

RG-161/U,

RG-174A/U,

RG-179B/U,

RG-187A/U,

RG-188A/U,

RG-316/U

M22520/5-03 (A)

M22520/5-08 (A)

M22520/5-35 (B)

0.0300

± 0.0005

12S

0.140

0.172

1.092

1.093

M22910/7-12 (B)

M22520/10-05 (A)

11-8676-1

0.040

± 0.001

M22520/5-03 (B)

M22520/5-33 (B)

RG-178B/U

RG-196A/U

8S

0.219

0.140

0.280

0.172

1.114

1.092

1.115

1.093

M22910/7-11 (B)

M22520/10-05 (B)

11-8676-2

11-8676-1

21-33061-

21-33020-31†

0.0300

± 0.0005

M22520/5-03 (B)

M22520/5-33 (B)

12S

31*†

RG-180B/U,

RG-195A/U,

Raychem

0.040

± 0.001

M22520/5-05 (B)

M22520/5-41 (B)

21-33020-5* 21-33019-5*

8S

0.219

0.280

1.114

1.115

M22910/7-15 (B)

M22520/10-07 (B)

11-8676-2

5022D1312-9

Raychem

5021D1331-9

0.040

± 0.001

M22520/5-05 (B)

M22520/5-41 (B)

21-33020-6* 21-33019-6*

21-33020-33 21-33061-33

8S

0.219

0.140

0.280

0.172

1.114

1.092

M22910/7-15 (B)

M22910/7-13 (B)

11-8676-2

11-8676-1

Thermatics

2929-29

0.0200

± 0.0005

12S

1.093

M22520/5-37 (B)

NOTE: Contacts can be ordered by part numbers given in chart

NOTE: Size 8S and 12S contacts are used with connector

inserts through shell size 18 only. For larger connector shell

sizes, use size 8L contacts.

*

Consult Amphenol, Sidney NY for availability

CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner

part numbers indicate applicable die closure. Commercial equivalents

with the same die closure dimension may be used.

CONTACT FINISH: For all contacts in this series feature

0.000050 minimum gold (Knoop hardness 130-200).

† 21-33020-31 and 21-33061-31 only mate with each other

46

Coaxial Contacts

for miniature cylindrical connectors, cont.

crimp SE (MIL-DTL-26482 Series 1 type) - application data

L

F

G

H

G

H

MATING

PIN DIA

MATING

PIN DIA

F

SOCKET

NOTE:All contacts of the same size and the same inner and outer contact

diameters (G & H) will mate with each other.

SE CRIMP COAX CONTACTS

For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, and MS/PT-SE Styles

Dimensional Data

(See Drawings above)

Installation Tools

Contact Part Number

Crimp Ferrule Tools

Finish

on

Mating

Parts

L

Retainer

Nut

Wrench

Contact

Size

Length Ref.

F

Cable

Type

H

Dia.

±±.±±0

G

Across

Flats

±±.±±ꢀ

MIL-T-2290±/7-0 MIL-C-2252±/5-±0 MIL-C-2252±/0±-±

Tool Tool Tool

Use with Die Part Use with Die Part Use with Die Part

Insertion

Removal

Dia.

Socket

Pin Socket

Number

21-33012-21 21-33011-21

21-33012-25 21-33011-25

8

I

II

2

4

RG-55B/U,

RG-142A/U, 21-33038-21 21-33037-21

RG-142B/U, 21-33038-25* 21-33037-25

8

I

II

0.0355

±0.0010

M22520/5-05 (A)

M22520/5-19 (B)

11-8369-5 11-7880-8

11-8660-5 11-8154-1

0.218 0.280 1.156 1.144 M22910/7-17 (B)

M22520/10-07 (A) 11-8676-2

M22520/10-07 (B) 11-8676-2

RG-223/U

21-33138-21( )* 21-33137-21( )*

21-33138-25( )* 21-33137-25( )*

8

I

II

**

2

21-33012-22 21-33011-22

21-33012-26 21-33011-26

8

I

II

RG-58C/U,

21-33038-22* 21-33037-22

RG-141A/U,

8

I

II

0.0355

±0.0010

M22520/5-05 (B)

M22520/5-41 (B)

11-8369-4 11-7880-8

11-8660-4 11-8154-1

4

0.218 0.280 1.156 1.144 M22910/7-15 (B)

21-33038-26* 21-33037-26*

RG-303/U

21-33138-22( )* 21-33137-22( )

21-33138-26( )* 21-33137-26( )*

8

I

II

**

RG-59B/U,

RG-62A/U,

RG-62B/U,

21-33012-36 21-33011-36

21-33038-36* 21-33037-36

8

II

2

4

0.0355

±0.0010

11-8369-5 11-7880-8

11-8660-5 11-8154-1

0.218 0.280 1.156 1.144 M22910/7-18 (B) M22520/5-45 (B)

11-8676-3

RG-210/U 21-33138-36( )* 21-33137-36( )

**

2

21-33012-37* 21-33011-37*

RG-140/U,

RG-302/U

0.0355

±0.0010

M22520/5-05 (A)

0.218 0.280 1.156 1.144 M22910/7-17 (B)

M22520/5-19 (B)

11-8369-5 11-7880-8

11-8660-5 11-8154-1

21-33038-37* 21-33037-37*

4

M22520/10-07 (A) 11-8676-2

21-33138-37( )* 21-33137-37( )*

**

21-33012-34 21-33011-34

21-33012-30 21-33011-30

8

I

II

2

4

21-33038-34 21-33037-34

21-33038-30 21-33037-30

8

I

II

0.0355

±0.0010

11-7880-8

11-8154-1

0.218 0.280 1.156 1.144

11-8676-2

RG-161/U,

21-33138-34( )* 21-33137-34( )*

RG-174A/U,

8

I

II

**

2

M22520/5-03 (A)

M22910/7-12 (B) M22520/5-08 (A) M22520/10-05 (A)

21-33138-30( )* 21-33137-30( )*

RG-179B/U,

11-8369-2

11-8660-2

RG-187A/U,

RG-188A/U,

RG-316/U

21-33012-1

21-33012-4

21-33011-1

21-33011-4

12

I

II

M22520/5-35 (B)

21-33038-1* 21-33037-1*

21-33038-4 21-33037-4*

12

I

II

0.0200

±0.0005

11-7880-12

11-8154-2

4

0.128 0.172 1.092 1.072

0.218 0.280 1.156 1.144

0.128 0.172 1.092 1.072

11-8676-1

11-8676-2

21-33138-1( )* 21-33137-1( )

21-33138-4( )* 21-33137-4( )*

12

I

II

**

21-33012-35 21-33011-35

21-33038-35 21-33037-35

21-33138-35( )* 21-33137-35( )*

8

I

2

4

0.0355

±0.0010

11-7880-8

11-8154-1

**

21-33012-3*

21-33012-5

21-33011-3*

21-33011-5

12

I

II

RG-178B/U,

RG-196A/U

M22520/5-03 (B)

M22520/5-33 (B)

11-8369-1

11-8660-1

2

4

M22910/7-11 (B)

M22520/10-05 (A)

21-33038-3* 21-33037-3*

21-33038-5 21-33037-5*

12

I

II

0.0200

± 0.0005

11-7880-12

11-8154-2

11-8676-1

21-33138-3( )* 21-33137-3( )*

21-33138-5( )* 21-33137-5( )*

12

I

II

**

NOTE: Contacts can be ordered by part numbers given in chart

CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers

indicate applicable die closure. Commercial equivalents with the same die closure

dimension may be used.

** See ﬁnish options for SE crimp Miniature contacts listed on page 44. Replace the parenthesis

of the contact part number with the ﬁnish sufﬁx number. However, you should consult

Amphenol, Sidney, NY regarding the availability of all ﬁnish choices for each part number.

47

CHART CONTINUES ON NEXT PAGE

*

Consult Amphenol, Sidney NY for availability

Coaxial Contacts

for miniature cylindrical connectors, cont.

crimp SE (MIL-MDL-26482 Series 1 type) - application data,

cont.

NOTE:All contacts of the same size and the same inner and outer contact

diameters (G & H) will mate with each other.

SE CRIMP COAX CONTACTS

For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, and MS/PT-SE Styles

Dimensional Data

Installation Tools

Contact Part Number

Crimp Ferrule Tools

Finish

on

Mating

Parts

L

Retainer

Nut

Wrench

Contact Type

Size

Length Ref.

F

Cable

H

G

Dia.

Across

MIL-T-2290±/7-0 ꢀ7MIL-C-2252±/5-±0 MIL-C-2252±/0±-±

Dia.

Insertion Removal

Flats

Tool

±±.±±0

±±.±±ꢀ

Socket

Pin Socket

Use with Die Part Use with Die Part

Use with Die Part

Number

21-33012-24 21-33011-24

21-33012-46* 21-33011-46*

8

I

II

2

4

RG-180B/U, 21-33038-24 21-33037-24

RG-195A/U 21-33038-46* 21-33037-46*

8

I

II

0.0355

± 0.0010

M22520/5-05 (B)

M22520/5-41 (B)

11-8369-4 11-7880-8

11-8660-4 11-8154-1

0.218 0.280 1.156 1.144 M22520/7-15 (B)

M22520/10-07 (B) 11-8676-2

21-33138-24( )* 21-33137-24( )*

21-33138-46( )* 21-33137-46( )*

8

I

II

**

Raychem

9527E1118,

RG-180B/U,

RG-195A/U

0.0200

± 0.0005

Daniels GS200 Tool with G2P330 or

M22520/31-01 Tool with Positioner M22520/31-02

11-8674- 11-7880-12

21-33106-40( ) 21-33105-40( ) 12

III

**

0.128

0.899 0.879

12

11-8154-2

21-33012-6*

21-33012-7*

21-33011-6*

21-33011-7*

12

I

II

2

4

RG-188 or

RG-316

Double Braid

21-33038-6* 21-33037-6*

21-33038-7* 21-33037-7*

12

I

II

0.0200

± 0.0005

11-8369-2 11-7880-12

11-8660-2 11-8154-2

0.128 0.172 1.092 1.072

0.128 0.280 1.156 1.144

11-8676-1

21-33138-6( )* 21-33137-6( )* 12

21-33138-7( )* 21-33137-7( )* 12

I

II

M22910/7-13 (B) M22520/5-37 (B)

**

21-33012-44 21-33011-44

21-33038-44* 21-33037-44*

21-33138-44( )* 21-33137-44( )*

21-33012-28 21-33011-28

21-33038-28* 21-33037-28*

21-33138-28( )* 21-33137-28( )*

8

II

I

2

4

Thermax

50C-25A-

DS-1

0.0355

± 0.0010

11-8369-4 11-7880-8

11-8660-4 11-8154-1

11-8676-2

**

2

RG-195

Double Braid

0.0355

± 0.0010

11-8369-4 11-7880-8

11-8660-4 11-8154-1

I

4

0.128 0.280 1.156 1.144 M22910/7-16 (B) M22520/5-43 (B)

I

**

21-33012-23 21-33011-23

21-33012-27 21-33011-27

8

I

II

2

4

RG-122/U,

Raychem

5022E5111

21-33038-23* 21-33037-23*

21-33038-27 21-33037-27

8

I

II

0.0355

± 0.0010

M22520/5-05 (B)

0.218 0.280 1.156 1.144 M22520/7-15 (B)

M22520/5-41 (B)

11-8369-4 11-7880-8

11-8660-4 11-8154-1

21-33138-23( )* 21-33137-23( )*

21-33138-27( )* 21-33137-27( )*

8

I

II

M22520/10-07 (B) 11-8676-2

**

21-33012-31 21-33011-31

21-33038-31 21-33037-31

21-33138-31( )* 21-33137-31( )*

21-33012-39 21-33011-39

21-33038-39* 21-33037-39*

21-33138-39( )* 21-33137-39( )*

21-33012-40* 21-33011-40

21-33038-40* 21-33037-40*

21-33138-40* 21-33137-40( )*

21-33012-43 21-33011-43

21-33038-43 21-33037-43

8

I

2

4

Raychem

9530D5314

I

8

I

**

2

8

II

Raychem

9527A1317

0.0355

± 0.0010

M22520/5-05 (B)

0.218 0.280 1.156 1.144 M22910/7-15 (B)

M22520/5-41 (B)

11-8369-4 11-7880-8

11-8660-4 11-8154-1

8

4

8

**

2

8

M22520/5-03 (A)

Raychem

7527A1318

0.0355

± 0.0010

11-8369-2 11-7880-8

11-8660-2 11-8154-1

8

4

0.218 0.280 1.156 1.144 M22910/7-12 (B) M22520/5-08 (A) M22520/10-05 (A) 11-8676-2

M22520/5-35 (B)

8

**

2

Westrex

199-49-1,

Tensolite

12

0.0200

± 0.0005

M22520/5-03 (B)

M22520/5-33 (B)

11-8369-1 11-7880-12

11-8660-1 11-8154-2

4

0.128 0.172 1.092 1.072 M22910/7-11 (B)

M22520/10-05 (B) 11-8676-1

21-33138-43( )* 21-33137-43( )* 12

**

30850/87T-1

NOTE: Contacts can be ordered by part numbers given in chart

CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers

indicate applicable die closure. Commercial equivalents with the same die closure

dimension may be used.

** See ﬁnish options for SE crimp Miniature contacts listed on page 44. Replace the parenthesis

of the contact part number with the ﬁnish sufﬁx number. However, you should consult

Amphenol, Sidney, NY regarding the availability of all ﬁnish choices for each part number.

*

Consult Amphenol, Sidney NY for availability

48

Mounting Recommendations

for miniature cylindrical connectors

FLANGE MOUNTED CONNECTORS

All ﬂange mounting PT connectors use standard MS mounting

dimensions. They cannot be back panel mounted due to

coupling clearance. The PTB (thru-bulkhead) type connector

must also be back panel mounted on one side. Flange gaskets

are available for both series, see page 37.

4 HOLES

No. 4 Screw

4 HOLES

No. 4 Screw

.120 Dia. for Shell Sizes 6-22 PT

for PT

R

.120 Dia. for Shell Sizes 6-22

for PC & PT

.147 Dia. for

No. 6 Screw

for SP and

(TP)

PC & PT

Size 24 PT

.147 Dia. for

for SP and for

Size 24 PT

.150 Dia. for

Size 24 PT

SP only

.150 Dia. for

R

(TP)

D

Dia.

SP only

Shell

Size

D Dia.

PT, PTB

SP

.641

.734

.812

.938

1.031

1.125

1.203

1.297

1.375

–

PT

.323

SP, PTB

6

8

.469

.594

.439

.563

.680

.859

.984

1.108

1.233

1.358

1.483

–

.449

R

2

10

12

14

16

18

20

22

24

.719

.573

.812

.699

.906

.823

R

2

SECTION

CUT-OUT

.969

.949

1.062

1.156

1.250

1.375

1.073

1.199

1.323

1.449

JAM NUT MOUNTINGS

The jam nut design has become very popular because it allows

bench wiring of harness assemblies. The labor saving often

offsets the added cost of the jam nut receptacle which is due to

the self contained “O” ring and the extra nut.

PT PANEL CUT OUT

P

B

R

+.010

–.000

B

+.000

–.010

Panel Thickness

Shell

Size

F

±.010

Min.

.062

Max.

.125

.250

6

8

.447

.572

.420

.542

.286

.331

.375

.442

.486

.530

.573

.641

.685

–

10

12

14

16

18

20

22

24

.697

.669

.884

.830

1.007

1.134

1.259

1.384

1.507

1.634

.955

SECTION

1.084

1.208

1.333

1.459

1.575

HERMETIC RECEPTACLE MOUNTINGS

HERMETIC RECEPTACLES

This series must be mounted in such a way as to preserve the

hermetic seal provided by the glass insert. Mounting data for

box and jam nut receptacles is given above. Cut-out required

for solder mounting receptacles (N) is given below.

N

The ﬁnish of each of these hermetic

receptacles is fused electro-deposited

tin for easy solderability, and protected

by a special lacquer for optimum shelf

life. The lacquer will not interfere with

any soldering operation.

Low temperature solder should be used

and the addition of a solder ﬁllet at arrow

points on drawing at right is rec-

ommended. Care must be taken that the

operating temperature of the ﬁnal

assembly does not rise above the

melting point of tin (440° F).

Shell

Size

6

8

N

Max.

.458

.582

10

12

14

16

18

20

22

24

.692

.801

.926

1.051

1.176

1.395

1.375

1.520

JAM NUT

RECEPTACLE

(See dimensions

above)

BOX

SOLDER

RECEPTACLE

CUT-OUT

RECEPTACLE

(See dimensions

above)

49

Other Amphenol Miniature Cylindrical

Connectors

Geophysical Miniature Cylindricals

Designed for the Geophysical industry’s rugged environments, the

®

Amphenol RPT Series connector has custom features that provide

reliability in extreme temperature and moisture conditions.

The unique shell design provides stronger shells along with an

anodized (nonconductive) ﬁnish for greater salt, corrosion and

abrasion resistance. Coupling nuts are manufactured with round

detent holes and are sold separately for greater customer ﬂexibility.

See product data sheet #146.

RJ Field Bayonet Cylindricals

Amphenol PCD division provides MIL-DTL-26482 bayonet coupling

cylindrical connectors with an RJ45 Ethernet interface*. These are

Amphenol^®RPT

Miniature Cylindricals

designed for use in all levels of harsh environments from industrial

to mil-aero applications providing IP67 protection from dust, ﬂuids,

®

vibration, shock and traction. The Amphenol RJ Field allows the

use of Ethernet Class D/Cat 5 and Cat 5e connections for 10

BaseT, 100 Base TX, or 1000 BaseT networks. It works with any

standard RJ45 cordset with no extra tooling. It also offers rein-

forced EMI protection.

For more information go online to www.rjﬁeld.com or ask for the

Field Series brochure.

*

RJ Field Bayonet and other Field Series products are available through Amphenol

PCD. These include RJF TV within MIL-DTL-38999 Series III threaded coupling

connectors, and RJF 544 within ECTA push-pull plastic shell coupling.

RJ Field Bayonet

Cylindricals

50

AMPHENOL CORPORATION

Amphenol Industrial

Phone: 888-364-9011

191 Delaware Avenue

Sidney, NY 13838-1395

www.amphenol-industrial.com

Notice: Speciﬁcations are subject to change without notice. Contact your nearest Amphenol Corporation Sales Ofﬁce for the latest speciﬁcations. All statements, information and data given herein are believed

to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products are made without

representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other

measures may not be required. Speciﬁcations are typical and may not apply to all connectors.

Amphenol^®97 Series Connectors are UL recognized and CSA recognized.

HKA 1-2016


型号：	MS3116F10-6S-LC
厂家：	Amphenol
描述：	MIL Series Connector, 6 Contact(s), Aluminum Alloy, Female, Crimp and Solder Terminal, Plug, 连接器
文件：	总53页 (文件大小：3647K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MS3116F10-6S-LC [AMPHENOL]

相关型号：

MS3116F10-6SW

MS3116F10-98P

MS3116F10-98PW

MS3116F10-98PY

MS3116F10-98S

MS3116F10-98SW

MS3116F10-98SX

MS3116F10-98SZ

MS3116F12-10P

MS3116F12-10S

MS3116F12-10SW

MS3116F12-10SY