MS3120P16-26PW [AMPHENOL]
MIL Series Connector, 26 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle,;型号: | MS3120P16-26PW |
厂家: | Amphenol |
描述: | MIL Series Connector, 26 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle, 连接器 |
文件: | 总80页 (文件大小:1800K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
Amphenol Miniature Cylindrical
Connectors
12-070-15
Meets MIL-C-26482, Series 1
Specifications
Amphenol
Table of Contents
Introduction, Amphenol® Miniature Cylindrical
Page No.
Proprietary/MIL-C-26482 Series 1 connectors
covered in this catalog are widely used in gen-
eral duty and environmental applications,
both industrial and military.
General Information, Design Flexibility . . . . . . . . . . . . . . . . . . .1, 2
Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5
Insert availability Breakaway Twist Pull. . . . . . . . . . . . . . . . . . . . . . . 6
Alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Insert arrangement patterns . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11
PT, SP, MS/PT Proprietary/MIL-C-26482, Series 1 Bayonet Coupling,
Solder Contacts
Markets that use this family of connectors include:
• Instrumentation
• Monitoring Equipment
• Machine Tool, Factory Automation
• Communications
General Information, Specifications, Service Class . . . . . . . . . . . 12, 13
PT00 (MS3110), SP00 wall mounting receptacle . . . . . . . . . . . . . . 14
PT01 (MS3111) cable connecting receptacle . . . . . . . . . . . . . . . . 15
PT02 (MS3112) SP02 box mounting receptacle . . . . . . . . . . . . . . 16
PT06 (MS3116) SP06 straight plug . . . . . . . . . . . . . . . . . . . . . 17
PT07 (MS3114) SP07 jam nut receptacle. . . . . . . . . . . . . . . . . . 18
PT08E, SP08E 90 degree plug . . . . . . . . . . . . . . . . . . . . . . . 19
PT Connectors with Printed Circuit Board Contacts -
• Geophysical
• Industrial Controls and Robotics
• Oil and Petrochemical Industries
• Rail/Mass Transit
• Military/Aerospace
If more information is needed concerning the con-
nectors covered in this publication, or if there are
special application needs, please contact:
box mount receptacle, jam nut receptacle. . . . . . . . . . . . . . . . . . 20
PTB, SPB thru bulkhead receptacle. . . . . . . . . . . . . . . . . . . . . 21
General Information, Specifications - PT hermetic . . . . . . . . . . . . . 22
PTIH (MS3113H) hermetic solder mounting receptacle. . . . . . . . . . . 23
PT02H hermetic box mounting receptacle . . . . . . . . . . . . . . . . . 24
PT07H (MS3114H) hermetic jam nut receptacle . . . . . . . . . . . . . . 25
PT Breakaway twist pull plug . . . . . . . . . . . . . . . . . . . . . . . . 26
PT, SP, MS/PT how to order . . . . . . . . . . . . . . . . . . . . . . . . 27
PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-C-26482, Series 1 Bayonet Coupling,
Crimp Contacts
General Information, Specifications, Service Class . . . . . . . . . . . 28, 29
PT00SE (MS3120), SP00SE wall mounting receptacle . . . . . . . . . . . 30
MF00SE (MS3128) wall mounting receptacle . . . . . . . . . . . . . . . . 31
PT01SE (MS3121) SP01SE cable connecting receptacle . . . . . . . . . 32
PT02SE (MS3122) SP02SE box mounting receptacle . . . . . . . . . . . 33
MF02SE (MS3127) box mounting receptacle . . . . . . . . . . . . . . . . 34
PT06SE (MS3126), SP06SE straight plug . . . . . . . . . . . . . . . . . 35
PT07SE (MS3124) SP07SE jam nut receptacle . . . . . . . . . . . . . . 36
PT08SE, SP08SE 90 degree plug . . . . . . . . . . . . . . . . . . . . . 37
PT-SE Breakway twist pull plug . . . . . . . . . . . . . . . . . . . . . . . 38
PT-SE, SP-SE, MS/PT-SE how to order . . . . . . . . . . . . . . . . . . 39
PT-CE, SP-CE Bayonet Coupling, Crimp Contacts
General Information, Specifications, Service Class . . . . . . . . . . . 40, 41
PT00CE, SP00CE wall mounting receptacle . . . . . . . . . . . . . . . . 42
PT01CE, cable connecting receptacle . . . . . . . . . . . . . . . . . . . 43
PT02CE, SP02CE box mounting receptacle . . . . . . . . . . . . . . . . 44
PT06CE, SP06CE straight plug . . . . . . . . . . . . . . . . . . . . . . . 45
PT07CE, SP07CE jam nut receptacle. . . . . . . . . . . . . . . . . . . . 46
PT08CE, SP08CE 90 degree plug . . . . . . . . . . . . . . . . . . . . . 47
PT-CE Breakawat twist pull plug . . . . . . . . . . . . . . . . . . . . . . 48
PT-CE, SP-CE how to order. . . . . . . . . . . . . . . . . . . . . . . . . 49
PC Threaded Coupling, Solder Contacts
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial Operations
40-60 Delaware Avenue
Sidney, New York 13838-1395
Telephone: 607-563-5011
Fax: 607-563-5351
Please go to the Amphenol websites to view,
download and save this catalog and most all of
Amphenol interconnection product literature.
www.amphenol-industrial.com
www.amphenol-aerospace.com
Some miniature connector styles
h
are available in RoHS Compliant
versions. Please contact Amphenol
Industrial Operations for more
information.
2
Amphenol operates Quality Systems that are cer-
tified to ISO9001: 2000 by third party registrars.
General Information, Specifications, Service Class . . . . . . . . . . . 50, 51
PC00 wall mounting receptacle . . . . . . . . . . . . . . . . . . . . . . . 52
PC01 cable connecting receptacle . . . . . . . . . . . . . . . . . . . . . 53
PC02 box mounting receptacle . . . . . . . . . . . . . . . . . . . . . . . 54
PC06 straight plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
PC07 jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . 56
General Information, Specifications - PC hermetic . . . . . . . . . . . . . 57
PCIH hermetic solder mounting receptacle . . . . . . . . . . . . . . . . . 58
PC02H hermetic box mounting receptacle . . . . . . . . . . . . . . . . . 59
PC07H hermetic jam nut receptacle. . . . . . . . . . . . . . . . . . . . . 60
PC how to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
PC-SE, PC-CE Threaded Coupling, Crimp Contacts
General Information, Specifications, Service Class . . . . . . . . . . . . . 62
PC-SE, PC-CE how to order . . . . . . . . . . . . . . . . . . . . . . . . 63
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-68
Application tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Contacts, Power and Thermocouple Crimp. . . . . . . . . . . . . . . . . . . . 70
Contacts, Shielded Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . 71-76
Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Other Amphenol Miniature Cylindrical Connectors . . . . . . . . . . . . . . 78, 79
Amphenol Sales Office and Authorized Distributor Listing . . . . . . . . . . . . 80
NOTE:
The connector products in this brochure were formerly
known as Bendix® products. These products are now
manufactured and sold under the Amphenol® brand
name. The name “Amphenol” will replace the name
“Bendix” on products and literature in the future.
NOTE:
The Miniature MIL-C-26482, Series 2 connectors PTS-
DR and MS/PTS-DR (formerly in this catalog) are no
longer supplied with these designations. Amphenol now
®
®
supplies the Amphenol /Matrix MIL-C-26482, Series
2. (Military numbers include MS3470 - MS3472,
MS3474, - MS3476).
Please refer to page 78 for a brief description of the
®
®
Amphenol /Matrix MIL-C-26482, Series 2 bayonet
coupling connectors with crimp, rear insertable and rear
releasable contacts, and ask for catalog 12-071 for
detailed information on this series.
®
Amphe nol Miniature Cylindrica l Conne ctors
Proprietary/MIL-C-26482, Series 1
Amphenol® Miniature Cylindrical connectors offer twice the number of contacts in just half the size of a Standard connector. These
miniature connectors, are available in several series, each with varying design characteristics and customer options to meet cost con-
siderations and provide maximum design flexibility. There are two styles within the family that are MS approved and qualified to MIL-
C-26482, Series 1, and in addition there are several proprietary styles.
Common features of all styles:
• All are for general duty applications and environmental sealing is achieved with the grommet and clamp design.
• Operating temperature is from –55°C to +125°; Operating voltage to 1000 VAC (RMS) at sea level.
• Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and provide an
indefinite shelf life.
• All have resilient inserts which provide high dielectric strength and moisture barrier.
• A variety of shell finishes (including non-cadmium) and a variety of backend accessories are available within the styles.
Bayonet Coupling with Solder Contact Termination
PT, MS/PT (solder)
• MS and proprietary versions
Options
• 7 shell styles with 60 insert patterns
• Hermetic seal (glass fusion) recepta-
cle styles available
• Pressurized thru bulkhead recepta-
cle style available
• Factory installed solder contacts
• 3 point bayonet coupling and 5 key/keyway mating.
• Intermateable with all miniature series connectors except threaded
PC series.
PT Solder
jam nut receptacle and
mated straight plug
• MS/PT meets MIL-C-26482 Series 1, service classes E, F and P.
• MS/PT is UL recognized.
SP (solder)
• SP Series is a modification of the PT with same features except a
wider flange for back panel mounting
• Breakaway quick disconnect styles
• EMI filter protection styles
• Pre-installed coax solder contacts
are available
• Printed circuit board contacts are
available
Bayonet Coupling with Crimp Contact Termination
PT-SE, MS/PT-SE (crimp)
Options
• MS and proprietary versions
• Crimp rear insertable/front release contact termination. (closed entry
socket insert prevents probe damage).
• 6 shell styles with 47 insert patterns
• Breakaway quick disconnect style
available
PT Solder
wall mount receptacle
• 3 point bayonet coupling and 5 key/keyway mating.
• Intermateable with all miniature series connectors except threaded
PC series.
• Coax and thermocouple contacts are
available
• MS/PT-SE meets MIL-C-26482 Series 1, service classes E, F, P.
SP-SE (crimp)
• Modification of the PT-SE with wider flange for back panel mounting
PT-CE, SP-CE (crimp)
• Incorporates a special one-piece insert and grommet assembly
PT-SE Crimp
Threaded Coupling with Solder Contact Termination
wall mount receptacle
and mated straight plug
PC (solder) Proprietary
Options
• Double stub threaded coupling and single hole polarization.
• Factory installed solder contacts
• 5 shell styles with 60 insert patterns
• Hermetic receptacles available
• Pressurized thru bulkhead recepta-
cle style available
• Pre-installed coax solder contacts
are available.
Threaded Coupling with Crimp Contact Termination
Two threaded PC styles are offered in some shell sizes. Both have
crimp front release and front removable contacts, but they have differ-
ent retention systems.
PC-SE (crimp) Proprietary - with spring tower retention system
• Spring tower retention system
Options
• 5 shell styles (consult Amphenol for
availability of shell sizes and insert
patterns)
PC Threaded Crimp
straight plug and wall
mount receptacle
PC-CE (crimp) Proprietary - with nylon wafer dielectric system
1
®
Amphe nol Miniature Cylindrica l
design flexibility
The large family of miniature proprietary and MS style connectors provides for
many optional features and designs. In addition to the choices of bayonet or
threaded shells, solder or crimp termination within the style variations, there are
additional options that are shown here.
Hermetics
Hermetically sealed receptacles have fused compression glass sealed
inserts which provide envionrmental moisture sealing. There are three
hermetic styles within the PT bayonet series and three hermetic styles
within the PC threaded series.
Coaxial Contacts
Amphenol Miniature connectors can incorporate shielded coax
contacts. Size 8 and 12 crimp coax contacts are available in PT-SE,
SP-SE, MS/PT-SE. Factory installed size 8 and 12 solder type coax
contacts are available in PT, SP,MS/PT connectors. See coax contact
information pages at the end of this catalog.
26482 Connector with Hermetic 26482 Connector with PC Tail
Seal Insert and Coax Contacts
Contacts
Printed Circuit Board Tail Contacts
PT bayonet connectors in box mounting receptacle and jam nut receptacle styles are avail-
able with printed circuit board contacts. Standard PCB tails for MIL-C-26482 connectors
have gold plating, .0050 inches over nickel. See page 20 and call Amphenol for further infor-
mation.
Flex Circuitry
Flex termination assemblies for attaching cylindrical connectors to printed circuit boards are
available through the Amphenol division ACT, Advanced Circuit Technology. Flex can be
used with miniature 26482 connectors and it can be designed to meet specific length, current
carrying capacity and to fit the precise geometric shape of the connector to board package.
Flex circuity plugs into a printed circuit board and creates a self-locking terminal pad which
eliminates the need for an additional interconnect to the PCB.
26482 Connector with Flex
Breakaway, Twist Pull Miniatures
Quick disconnect “breakaway” styles are shown in this catalogs. These are available in PT
solder style plugs (page 26), PT-SE crimp style plugs (page 38) or PT-CE crimp style plugs
(page 48). Quick disconnect of the connector plug from the receptacle is accomplished with
axial pull on the lanyard. This instant decoupling and damage free separation is ideal for
weapons release and blind or difficult accessibility situations. Separation forces vary per
connector series. The plug and receptacle need to be fully mated before disengagement by
the lanyard pull.
Breakaway Twist Pull 26482
Filter Protection
Amphenol offers the FPT Series which combines the miniature PT
series with an EMI filter. Designed to provide EMI protection for
sensitive circuits, each circuit is individually filtered within the con-
nector, eliminating the need for costly and bulky exterior network
filters. Filter contacts are available in MF, HF, VHF, and UHF
ranges and are intermateable and intermountable with MIL-C-
26482 connectors. For further information see catalog 12-120,
Amphenol EMI Filter Transient Protection Connectors. (online at
www.amphenol-aerospace.com).
26482 Connector with EMI
Filter Protection
26482 Connector with Overmolded
Cable
Overmolded Cable
Overmold seals and cables can be designed for almost any industrial application. A variety
of materials are available: neoprene, hypalon and others; and a variety of lengths can be
designed to meet customer specifications. Overmold seals to the rear of the connector and
to the cable jacket providing moisture sealing.
2
®
Amphe nol Miniature Cylindrica l
connector selection guide
The accompanying chart is provided to assist the user in selecting
the appropriate type of miniature connector to meet the application
requirements. Further information can be found in specific sections
of this catalog.
Solder
Crimp
MS/
PT-SE PT-SE SP-SE PC-SE PT-CE SP-CE PC-CE
CHARACTERISTICS
Intermateable†
Contacts
PT
MS/PT
SP
PC
o
o
o
X
o
o
o
X
o
o
X
Solder
•
•
•
•
•
•
•
•
•
•
•
•
Crimp RI/FR
•
•
•
•
•
•
•
Contact Retention
System
Non-Removable
•
Removable
•
•
•
•
•
•
•
•
•
•
•
•
Coupling
Bayonet
Threaded
•
•
•
Standard Finishes††
Olive Drab Cadmium (003)
Anodic Coated (005)
Bright Cadmium (001)
Resilient Dielectric (–55°C to +125°C)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Temperature Range
Wide Mounting Flange
Hermetic Seal
•
•
•
•
•
•
•
•
•
•
•
•
SHELL STYLE AVAILABILITY
Wall Mounting Receptacle “00”
Cable Connecting Receptacle “01” ***
Box Mounting Receptacle “02”
Straight Plug “06”
•
•
•
•
•
•
•
•
•
•
•
•
**•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
*•
•
•
•
•
•
•
*•
•
**•
•
•
•
•
•
•
•
•
•
•
Jam Nut Receptacle “07”
Thru-bulkhead Receptacle “TB”
Solder Mount Receptacle “I”
90° Plug “08”
*•
•
*•
*•
•
*•
•
*•
*•
•
•
•
•
•
•
•
RI/FR = Rear Insertion/Front Releasable
†
o intermates with o
X intermates with X
†† Optional finishes available. See “how to order” sections.
Available in hermetic version
** Dual mounting holes
*
*** This connector style is sometimes referred to as a cable connecting “plug.”
It does, however, mate with either a straight or 90 degree plug.
Amphenol®/Matrix® MIL-C-26482, Series 2 bayonet coupling connectors with rear insertable and rear releaseable
contacts are covered in another catalog - See pageXX for a brief description and see complete details in catalog 12-071
which is online at www.amphenol-aerospace.com.
3
®
Amphe nol Miniature Cylindrica l
insert availability
Solder Termination
Crimp Termination
Hermetic MS/PT-SE
Contact Size
Coax
PT
MS-PT
PC
PT-SE
SP-SE
PC-SE
PT-CE
SP-CE
PC-CE
Insert
Arrangement MS/PT
Total
Contacts
Service
Rating
PT
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
S
X
X
X
X
X
X
SP
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
S
X
X
X
X
X
X
PC
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
S
X
X
X
X
X
X
20
1
16
12
12
8
6-1
X*
X
1
2
I
8-2
X
X
X
X
X
X
2
I
8-3
X
3
3
I
8-4
X
4
4
I
8-33
8-98
X
X
3
3
I
3
3
I
10-2
2
2
I
10-5
X*
X
5
5
6
I
10-6
X
X
X
X
6
I
10-70
10-98
12-3
1
1
Coax
X
X
X*
X
X
X
6
6
I
3
3
4
II
12-4
X*
X*
X
4
I
12-8
X
X
X
X
X
X
8
8
I
12-10
12-14
12-98
14-2
10
14
10
2
10
I
14
10
I
I
2
II
14-4
X
X
4
4
2
I
14-5
X
X
X
5
5
II
14-8
8
6
8
I
14-12
14-15
14-18
14-19
14-22
14-71
14-91 HV
14-AA
16-8
X
X
X
X
X
X
X
X
X
X
12
15
18
19
5
4
1
I
X
X
14
18
19
1
I
X*
X
X
I
X
I
X*
4
4
I
P
S
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
(02CE)
4
3
1
I
X*
3
3
**
X
X
4
I
X
X
X
X
X
X
X
X
X
8
8
1
II
16-23
16-26
16-70
16-76†††
16-99
18-5
23
26
15
14
23
5
22
26
14
8
I
X
I
1
5
N/A
X*
X
1
***
I
X
X
X
X
X
X
X
21
2
X*
5
8
II
I
18-8
8
18-11
18-30
X
X
X
X
X
X
X
X
X
X
X
X
X
11
30
11
II
I
X*
29
1
*Not available in MS version
**Flashover voltage 5,000 VAC (RMS)
***1500 VAC (RMS)
P designates Pin insert only.
†Size 12 contacts for #10 wire
††Not presently tooled
Sdesignates Socket insert only.
†††Contacts must be ordered separately
4
®
Amphe nol Miniature Cylindrica l
insert availability, cont.
Solder Termination
Crimp Termination
Hermetic MS/PT-SE
Contact Size
Coax
PT
MS-PT
PC
PT-SE
SP-SE
PC-SE
PT-CE
SP-CE
PC-CE
Insert
Arrangement MS/PT
Total
Contacts
Service
Rating
PT
SP
PC
20
32
16
12
12
8
18-32
18-71
18-72
18-75
18-76
18-80
18-91 HV
20-16
20-24
20-25
20-26
20-27
20-39
20-41
20-70
20-90 HV
22-7
X
X
X
X
X
X
X
32
9
I
X*
8
1
Coax, II
X
X
X
X
X
X
14
4
10
4
N/A
4
1
2
Coax
4
3
II
X
X
X
X
X
X
X
8
6
6
Coax, I
X*
X
6
**
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
16
24
25
26
27
39
41
14
7
16
II
24
25
20
27
37
41
10
7
I
I
6
I
X
X
X
X
X
X
I
X
X
X
X
2
I
I
4
Coax
X
X
X
X
X
X
X
X
X
Hi-Voltage
X*
X
7
7
Coax
22-21
22-25
22-32
22-34
22-36
22-41
22-55
22-70
22-71
22-72
22-78†††
22-96
24-31
24-51
24-61
24-71
24-79
X
X
X
X
21
25
32
34
36
41
55
19
9
21
25
II
X*
X
I
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
P
X
X
X
X
32
I
34
36
27
55
13
2
I
I
X
X
X
X
X
X
14
I
I
6
7
3
7
I, Coax
I, Coax
X
X
X
X
X
X
19
7
12
4
31
2
N/A
X*
X*
Coax
7
7†
II
X
X
31
51
61
49
6
I
X*
X
47
61
45
1
4
I
I
X
X
X
X
X
X
X
X
2
5
N/A
Coax
*Not available in MS version
**Flashover voltage 5,000 VAC (RMS)
***1500 VAC (RMS)
†Size 12 contacts for #10 wire
††Not presently tooled
†††Contacts must be ordered separately
5
®
Amphe nol Miniature Bre a kaway Twis t Pull
insert availability
For further information regarding any additional
insert patterns available in Breakaway Miniature
connectors, please contact Amphenol Aerospace.
For availability of shielded coax contacts within
Breakaway Miniature connectors contact Amphe-
nol.The Breakaway style pages are: PT (solder)
breakaway plug is on page 26, the PT-SE (crimp)
breakaway plug is on page 38, and the PT-CE
(crimp) breakaway plug is on page 48.
Insert Availability - Breakway Twist Pull
Crimp
Solder
Termination
Termination
Contact Size
Service
Insert
Arrangement
Total
PT-CE
PT-SE
PT
X
Contacts
20
2
16
12
Rating
8-2
X
X
X
2
3
I
8-3
X
3
I
8-4
X
4
4
I
10-2
X
2
2
I
10-6
X
X
X
X
X
X
6
6
6
7
I
10-98
10-99
12-3
X
6
I
X
X
7
I
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
3
3
4
II
12-4
4
I
12-8
X
X
X
X
8
8
10
10
I
12-10
12-98
14-2
10
10
2
I
I
2
2
II
14-5
X
X
5
5
II
14-8
8
6
8
I
14-12
14-15
14-16
14-18
14-19
14-91
16-6
X
X
X
X
12
15
4
4
1
2
I
14
I
2
6
II
X
X
X
X
X
18
19
3
18
19
3*
I
I
H.V.
6
I
16-8
X
X
X
X
X
X
X
X
X
X
X
X
X
8
8
1
II
16-23
16-26
16-99
18-5
23
26
23
5
22
26
21
I
I
2
I
5
II
18-11
18-28
18-30
18-32
18-91
20-8
X
11
28
30
32
6
11
2
II
26
29
32
6*
I
X
X
1
I
I
H.V.
8
8
I
II
I
20-16
20-24
20-25
20-27
20-39
20-41
22-8
X
X
X
16
24
25
27
39
41
8
16
24
25
27
37
41
I
X
X
X
I
X
X
2
I
I
8
21
25
II
II
I
22-21
22-25
22-32
22-34
22-36
22-41
22-55
22-96
22-97
22-99
24-31
24-61
X
X
X
X
21
25
32
34
36
41
55
7
X
X
X
X
X
X
X
X
32
34
36
27
55
I
I
I
X
X
X
14
I
X
I
7†
II
II
II
I
X
X
16
11
31
61
16
11
31
X
X
X
X
61
I
* 5KV Voltage Rating
† Size 12 contact for #10 wire.
6
®
Amphe nol Miniature Cylindrica l
alternate positioning
Alternate Positioning
To avoid cross-plugging problems in applications requiring
the use of more than one miniature cylindrical connector of
the same size and arrangement, alternate insert rotations
are available as indicated in the accompanying chart.
Position W
Position X
Position Y
Position Z
As shown in the diagram at right, the front face of the pin
insert is rotated within the shell in a clockwise direction from
the normal shell key. The socket insert would be rotated
counterclockwise the same number of degrees in respect to
the normal shell key.
Views looking into front face of pin insert or rear of socket insert.
Insert Rotation
Degrees
Insert Rotation
Degrees
Shell
Size
Insert
Arrangement
Shell
Size
Insert
Arrangement
W
–
X
–
Y
–
Z
–
W
62
180
85
18
53
45
–
X
Y
Z
6
8
6-1
18
18
18
18
18
18
18
18
18
20
20
20
20
20
20
20
20
20
22
22
22
22
22
22
22
22
22
22
22
22
22
24
24
24
24
24
18-11*
18-30*
18-32*
18-71
18-72
18-75
18-76
18-80
18-91HV
20-16*
20-24
20-25
20-26
20-27
20-39*
20-41*
20-70
20-90
22-7
119
193
138
108
102
–
241
285
222
127
213
–
340
350
265
215
293
–
8-2*
58
60
45
90
–
122
210
97
–
–
–
8
8-3
–
–
8
8-4*
184
–
–
8
8-33*
8-98
–
8
–
–
–
10
10
10
10
10
12
12
12
12
12
12
14
14
14
14
14
14
14
14
14
14
14
14
16
16
16
16
16
16
18
18
10-2
45
45
90
–
90
151
–
315
180
–
–
–
–
–
10-5*
10-6*
10-70
10-98*
12-3*
12-4*
12-8
270
–
45
90
238
70
72
13
72
63
45
63
45
19
16
60
72
62
72
39
30
30
33
42
19
19
90
22
90
39
–
90
135
240
333
215
216
210
216
252
225
222
225
–
160
270
347
290
288
322
288
333
–
180
318
145
144
107
144
144
126
135
135
41
–
–
–
90
–
180
–
240
180
–
270
–
38
90
60
–
–
–
112
155
–
203
270
–
292
295
–
12-10*
12-14
12-98*
14-2
61
58
45
40
48
43
17
15
30
45
–
135
122
–
189
–
340
–
335
315
–
14-4*
14-5*
14-8
–
–
92
162
90
110
90
165
–
184
189
–
273
312
–
22-21*
22-25
22-32
22-34
22-36
22-41
22-55*
22-70
22-71
22-72
22-78
22-96*
24-31
24-51
24-61*
24-71
24-79
135
125
145
142
144
135
142
82
175
211
215
218
216
264
226
218
236
277
–
349
336
288
298
288
–
14-12*
14-15*
14-18*
14-19*
14-22
14-71
14-91HV
14-AA*
16-8*
16-23
16-26*
16-70
16-76
16-99*
18-5
155
180
315
–
234
270
–
–
314
312
270
339
–
–
–
–
–
60
–
–
–
191
200
41
45
54
158
60
41
–
–
–
152
270
–
180
–
331
–
41
–
–
275
216
–
338
286
–
225
171
180
131
–
255
313
270
205
–
–
122
–
–
324
281
–
66
55
180
156
97
–
223
263
–
340
315
–
18-8
* Available in Hermetic Class
7
®
Amphe nol Miniature Cylindrica l
insert arrangements
front face of pin inserts illustrated
D
C
C
A
A
B
A
C
A
A
C
B
B
A
B
B
B
Insert Arrangement
Service Rating
6-1
I
8-2
I
8-3
I
8-4
I
8-33
8-98
10-2
I
I
I
Number of Contacts
Contact Size
1
2
3
4
3
3
2
20
20
20
20
20
20
16
A
G
A
A
A
F
E
A
F
B
E
F
B
C
A
B
H
D
E
D
B
D
B
C
E
C
C
D
C
D
C
B
Insert Arrangement
Service Rating
10-5
10-6
10-70
Coax
1
10-98
12-3
II
12-4
12-8
I
I
I
I
I
Number of Contacts
Contact Size
5
6
6
3
4
8
20
20
8 Coax
20
16
16
20
A
E
B
A
E
C
H
B
A
H
F
B
D
A
A
F
H
H
G
B
C
E
B
E
D
C
A
B
G
K
J
C
L
D
M
G
C
K
J
K
D
C
J
R
F
D
F
D
N
E
P
Insert Arrangement
Service Rating
12-10
I
12-14
I
12-98
I
14-2
II
14-4
14-5
II
14-8
I
I
Number of Contacts
Contact Size
10
14
10
2
4
5
6
2
20
20
20
12
12
16
20 12
A
A
L
M
A
E
H
E
A
L
A
N
A
D
A
B
B
K
R
L
N
J
P
M
K
H
M
B
B
G
B
K
C
C
D
J
B
V
U
T
U
F
K
N
E
J
T
P
C
R
M
F
C
S
R
D
H
D
P
F
D
J
S
C
C
B
L
E
G
H
G
E
D
C
G
F
Insert Arrangement
Service Rating
14-12
I
14-15
I
14-18
I
14-19
I
14-22
I
14-71
I
14-91HV
Flashover
5,000 VAC (RMS)
Number of Contacts
Contact Size
8
4
14
1
18
19
1
4
3
1
3
20 16
20 16
20
20
20 12
16 8 Coax
20
For contact legend see page 61.
8
®
Amphe nol Miniature Cylindrica l
insert arrangements
front face of pin inserts illustrated
P
A
R
S
A
H
A
N
Y
B
A
R
P
A
T
B
R
H
P
M
C
F
N
G
B
S
U
B
a
U
G
b
D
C
Z
L
D
E
N
J
X
M
T
c
F
C
Z
V
F
D
C
B
K
L
K
M
W
Y
W
E
X
J
K
V
C
D
E
L
E
D
G
F
H
J
H
G
Insert Arrangement
Service Rating
14-AA
16-8
II
16-23
I
16-26
I
16-70
N/A
I
Number of Contacts
Contact Size
4
8
22
1
26
14
1
12
16
20 16
20
20 12 Coax
A
H
J
A
A
A
R
B
B
P
G
B
K
A
H
B
S
T
C
L
N
N
J
C
K
U
E
B
P
Y
Z
D
M
X
V
D
H
L
M
E
W
L
D
C
G
F
C
C
G
E
F
K
G
J
F
D
F
H
E
D
E
Insert Arrangement
Service Rating
16-76
16-99
I
18-5
18-8
18-11
II
Flashover
1.500 VAC (RMS)
II
5
I
Number of Contacts
Contact Size
8
1
5
21
2
8
11
20 12* 2 Coax*
20 16
12
12
16
*Contact Positions Optional
A
T
A
S
A
B
S
e
H
B
B
R
R
U
f
C
V
d
T
K
A
L
V
P
C
c
U
J
P
d
D
e
J
B
W
G
C
b
N
D
j
N
c
E
g
P
M
f
X
g
a
W
M
E
M
F
h
H
C
Y
b
X
Z
N
Y
L
F
G
L
G
D
a
Z
F
D
K
G
H
K
F
E
J
E
H
J
Insert Arrangement
Service Rating
18-30
I
18-32
I
18-71
II, Coax
18-72
N/A
Number of Contacts
Contact Size
29
1
32
8
1
10
4
20 16
20
16 8 Coax
20 12 Coax
A
C
A
A
F
H
B
D
B
D
D
C
A
G
C
E
B
B
F
D
C
E
Insert Arrangement
Service Rating
18-75
Coax
4
18-76
II
18-80
18-91 HV
Flashover
5,000 VAC (RMS)
I, Coax
Number of Contacts
Contact Size
3
1
6
2
6
8 Coax
12 Coax 8 Coax
20 8 Coax
20
9
®
Amphe nol Miniature Cylindrica l
insert arrangements
front face of pin inserts illustrated
A
L
A
N
R
U
A
B
L
A
M
X
V
K
P
X
S
B
T
B
C
M
S
C
W
N
N
D
B
K
H
R
D
S
a
c
Y
a
W
b
T
W
M
E
a
Y
C
J
V
P
P
E
b
J
Z
C
R
P
N
F
Z
X
J
Z
L
U
V
F
R
U
D
H
M
G
H
D
L
T
G
S
Y
E
K
G
G
E
K
H
J
F
F
Insert Arrangement
Service Rating
20-16
II
20-24
I
20-25
I
20-26
I
Number of Contacts
Contact Size
16
24
25
20
6
16
20
20
20 12
A
R
A
W
B
A
V
K
A
B
W
j
C
n
B
X
k
U
P
X
L
V
J
B
D
j
C
Y
Y
a
S
C
a
T
k
i
U
N
i
Z
E
H
Z
b
D
s
m
Z
D
T
S
M
P
m
r
h
T
S
h
t
a
M
L
F
d
c
E
E
r
R
Y
U
G
g
b
g
b
q
n
d
F
p
p
q
e
P
R
F
H
C
f
c
f
c
X
V
G
N
K
G
D
P
W
d
e
L
N
J
H
G
M
N
F
E
K
J
J
M
K
L
H
Insert Arrangement
Service Rating
20-27
I
20-39
I
20-41
I
20-70
Coax
Number of Contacts
Contact Size
27
37
2
41
10
4
20
20 16
20
20 8 Coax
A
P
A
A
N
R
Z
N
B
M
B
F
B
P
X
Y
S
A
C
E
M
K
W
R
L
G
D
C
T
X
G
B
a
b
L
D
E
C
V
S
K
D
W
U
V
F
C
U
T
E
D
J
E
J
F
H
F
G
H
G
Insert Arrangement
Service Rating
20-90
22-7
Coax
7
22-21
II
22-25
I
Hi-Voltage
Number of Contacts
Contact Size
7
21
25
20
8 Coax
16
16
A
Z
A
T
T
Y
N
A
A
B
S
B
X
j
P
j
B
C
S
U
a
k
b
R
U
e
R
e
f
B
C
V
M
W
D
d
m
C
V
R
b
a
c
S
h
g
n
V
n
p
e
s
m
l
E
P
h
j
W
X
D
L
C
c
k
t
q
f
c
W
X
i
f
g
P
N
U
Z
d
l
T
D
F
N
r
E
d
L
K
D
b
e
T
g
f
h
d
j
E
G
Y
M
U
g
h
Z
k
F
S
c
Y
H
E
M
J
Y
a
F
X
V
F
b
Z
R
G
a
J
W
L
G
P
H
K
H
K
N
K
L
H
M
G
J
J
Insert Arrangement
Service Rating
22-32
I
22-34
I
22-36
I
22-41
I
Number of Contacts
Contact Size
32
34
36
27
20
14
16
20
20
20
10
®
Amphe nol Miniature Cylindrica l
insert arrangements
front face of pin inserts illustrated
A
V
p
U
A
B
T
A
N
A
V
F
H
J
S
C
n
M
B
W
K
B
m
F
B
X
AA
k
Y
Z
a
b
q
S
U
P
L
T
N
D
R
BB
J
C
U
S
L
J
C
E
z
y
G
r
CC
GG
FF
j
i
HH
EE
V
E
F
P
s
M
K
T
D
P
R
DD
N
t
x
u
H
D
R
G
h
w
v
c
g
M
d
G
G
E
E
C
H
F
f
e
L
H
J
K
D
Insert Arrangement
Service Rating
22-55
I
22-70
22-71
22-72
N/A
I, Coax
I, Coax
Number of Contacts
Contact Size
55
13
6
2
7
12
4
3
20
20 8 Coax
20
8 Coax
20 16 8 Coax
a
A
b
M
Z
A
B
c
A
Z
A
B
G
C
L
N
B
C
Y
P
Q
b
u
D
X
F
B
F
E
t
d
AA
Y
X
a
g
E
W
e
s
y
K
J
f
C
v
G
F
DD
BB
z
R
f
V
r
e
c
D
G
CC
g
U
W
H
d
S
q
w
x
h
H
V
T
p
T
E
C
U
E
i
J
n
S
j
G
F
m
k
K
R
D
L
D
P
M
N
Insert Arrangement
Service Rating
22-78
Coax
7
22-96
24-31
I
24-51
I
II
7
Number of Contacts
Contact Size
31
47
4
8 Coax
12 for
# 10 wire
16
20 12 Coax
A
a
Z
A
Z
B
d
b
a
B
Y
F
c
Y
C
t
b
C
s
c
v
u
X
X
D
w
t
z
D
HH
W
y
u
e
d
h
r
D
C
A
B
GG
FF
x
W
E
NN
JJ
AA
BB
E
s
f
q
e
V
U
PP
LL
y
V
F
MM
KK
r
F
g
p
f
EE
z
U
G
q
n
g
G
h
E
DD
AA
T
T
m
H
p
x
k
v
i
w
i
H
CC
m
BB
S
S
n
j
J
j
J
k
R
R
K
K
P
P
L
L
N
N
M
M
Insert Arrangement
Service Rating
24-61
I
24-71
N/A
2
24-79
Coax
Number of Contacts
Contact Size
61
45
20
2
1
5
20
16 8 Coax
20 8 Coax
Contact Legend
Contact Size
Symbol
20
16
12
HV
12 Coax
8 Coax
11
®
Amphe nol PT, SP, MS/PT
Proprietary/MIL-C-26482, Series 1
bayonet coupling and solder termination
Amphenol® solder contact miniature cylindrical connectors
meet the most critical application needs. Design versatility
combined with high reliability performance makes these
series of Miniature Cylindrical Connectors ideal for environ-
mental sealing or pressurized applications.
wall mounting
receptacle
The MS/PT Series is qualified to MIL-C-26482, Series 1 and has
all the outstanding design characteristics and quality of the PT
Series. The SP Series is a modification of the PT, providing special
shells with a wide mounting flange for back panel mounting.
A corrosion resistant electrically conductive finish of cadmium
plate with an olive drab chromate after-treatment is used on the PT
and MS/PT. The SP is given a durable non-conductive hard anodic
“Alumilite”® coating which provides abrasion protection and resis-
tance to corrosion.
cable connecting
receptacle*
Shell components for these series are aluminum. The dependable
5 key/keyway polarization with bayonet lock coupling assures pos-
itive mating with no chance of cross plugging. Spring tension pro-
vided by a wave washer in the coupling nut ensures maintenance
of interfacial seal between mating halves.
Both the insert and main joint gasket are molded from resilient
neoprene. This provides excellent moisture sealing at the gasket
and superior electrical isolation of the contact in the insert.
box mounting
receptacle
Both pins and sockets are machined from a copper alloy and are
gold plated. This gold plating eliminates contact corrosion and
offers an indefinite shelf life. Socket contacts for these series are a
closed entry design. A breakaway style plug is available in the PT
solder series. Hermetics receptacles are available in PT and MS/
PT solder series. Receptacles with printed circuit board contacts
are also available.
straight plug
PT Solder is UL recognized under file #E115497, Vol. 1, Sec. 5.
The PT, SP and MS/PT Series are intermateable and intermount-
able with all existing Miniature Cylindrical Series connectors
except for the threaded coupling PC Series.
jam nut
receptacle
Refer to pages 4-11 for insert arrangement availability.
PT, SP, MS/PT
CONTACT DATA/CONNECTOR RATINGS
Contact Specifications
Contact
Size
Test
Current
Maximum
Millivolt Drop†
Solder Well
Diameter
Solder Well
Depth
thru bulkhead
receptacle
+.004
.046
+.031
.125
20
16
12
7.5
13.0
23.0
55
50
–.000
–.000
+.005
.078
+.031
.188
–.003
–.000
+.004
–.002
+.031
–.000
42
.116
.188
breakaway
twist pull
plug
Service Rating
Recommended
Operating
AC Voltage
at Sea Level
Test Voltage AC (RMS), 60 cps
Service
Rating
Sea
Level
50,000
ft.
70,000
ft.
110,000
ft.
I
600
1,500
2,300
500
750
375
500
200
200
II
1,000
† Silver plated wire per MIL-C-26482
* This connector style is sometimes referred to as a cable connecting
“plug.” It does, however, mate with a straight or 90 degree plug.
12
PT, SP Service Classes
PT and SP connectors are available in the service
classes listed below. Each class, with the exception of
hermetic, offers one or more means of terminating or
supporting a cable or wire bundle. Class “W” is not
available in the SP Series.
“A”
general duty
“A”
General duty; back shell is threaded for con-
duit attachment of MS3057 cable clamp
“A” (SR) General duty, with strain relief clamp for
cable or wire bundle support
“C”
Pressurized receptacle; less than 1 cu. in.
per hour leakage at 30 psi over a tempera-
ture range of –65°F to +257°F
“E”
Environmental resistant connectors - sup-
plied with a multi-holed grommet and clamp-
ing nut for moisture-proofing individual open
wires
“E” (SR),
MS / “F”
strain relief
“E” (SR) Environmental resistant strain relief clamp
and grommet for moisture proofing individual
wires; provides added wire bundle support
“J”
Same as “W” class except with strain relief
“P”
Translucent nylon boot for retaining cus-
tomer-applied potting compounds; held in
place by a threaded ring
“P” (SR) Strain relief clamp suitable for retaining cus-
tomer applied potting compounds, with pro-
vision for wire support
“E”,
MS / “E”
open wire seal
“W”
Compressing clamp and neoprene gland for
moisture proofing multi-conductor jacketed
cables. Telescoping sleeves (MS 3420A)
can be used to adapt to cables smaller than
minimum close-down.
“H”*
Hermetically sealed with compression glass
inserts (see pages 22-25)
“P”,
MS / “P”
potting boot
Style with printed circuit board contacts- see page 20.
Breakaway style - see page 26.
MS/PT Service Classes
The MS/PT Miniature connector is available in the fol-
lowing certified service classes:
“E”
Environmental resistant connectors - sup-
plied with a multi-holed grommet and clamp-
ing nut for moisture-proofing individual open
wires
“W”
cable seal
“F”
“P”
Grommet seal with strain relief clamp
Translucent nylon boot for retaining cus-
tomer-applied potting compounds; held in
place by a threaded ring
13
PT00 (MS3110)
SP00
wall mounting receptacle
S
L
PT
.120 .005 Dia.
R
Q
M
(TP)
(.147 .005 Dia.ꢀ size 24)
SP
.150 .005 Dia.
4 Holes
R
S
A
(TP)
“W” Cable Seal
K
Z
L
TERMINATION ASSEMBLIES
“A” General Duty/
“C” Pressurized“
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
“E” Open Wire Seal
“P” Potting Boot
N
D
L
L
L
L
V
PT00W-XX-XXX
G D H
N
N
N
D
N
D
“J” Cable Seal
XL
C
.375 MIN
PT00A-XX-XXX
SP00A-XX-XXX
PT00C-XX-XXX
PT00A-XX-XXX (SR)
SP00A-XX-XXX (SR)
PT00E-XX-XXX (SR)
SP00E-XX-XXX (SR)
PT00P-XX-XXX (SR)
SP00P-XX-XXX (SR)
MS3110F-XX-XXX
PT00E-XX-XXX
SP00E-XX-XXX
MS3110E-XX-XXX
PT00P-XX-XXX
SP00P-XX-XXX
MS3110P-XX-XXX
N
D
PT00J-XX-XXX
To complete part number see how to order on page 27.
MS3110J-XX-XXX
■
(MMC) located within .0025 of (TP)
Receptacle Front View
Receptacle Side View
M +.010
Class “A”, “C”
R
S
K +.020
–.010
Z
Max.
A
+.001
–.005
Q
V
(TP)
Max.
–.000
Shell
Size
L
Thread
D
Min.
L
N
Thread
Class A
PT
SP
PT
SP
PT
SP
Max.
PT
SP
Class 2A
PT
SP
Max. Max.
6
.469 .641 .688 .953 .348 .493 .524 .906 .431 .462 .3125-32 NEF
.468 .438 .175 1.553 .462 .3750-32 NEF
8
.594 .734 .812 1.047 .473 .493 .524 .906 .431 .462 .4375-28 UNEF .468 .438 .297 1.553 .590 .5000-28 UNEF
10
12
14
16
.719 .812 .938 1.125 .590 .493 .524 .906 .431 .462 .5625-24 NEF
.812 .938 1.031 1.250 .750 .493 .524 .906 .431 .462 .6875-24 NEF
.468 .438 .421 1.553 .717 .6250-24 NEF
.468 .438 .546 1.553 .834 .7500-20 UNEF
.906 1.031 1.125 1.344 .875 .493 .524 .906 .431 .462 .8125-20 UNEF .468 .438 .663 1.553 .970 .8750-20 UNEF
.969 1.125 1.219 1.438 1.000 .493 .524 .906 .431 .462 .9375-20 UNEF .468 .438 .787 1.553 1.088 1.0000-20 UNEF
18 1.062 1.203 1.312 1.516 1.125 .493 .524 .906 .431 .462 1.0625-18 NEF
20 1.156 1.297 1.438 1.672 1.250 .650 .650 1.125 .556 .556 1.1875-18 NEF
22 1.250 1.375 1.562 1.750 1.375 .650 .650 1.125 .556 .556 1.3125-18 NEF
24 1.375 1.500 1.688 1.875 1.500 .683 .683 1.188 .589 .589 1.4375-18 NEF
.531 .438 .879 1.553 1.216 1.1875-18 NEF
.531 .531 1.014 1.703 1.332 1.1875-18 NEF
.531 .531 1.134 1.703 1.460 1.4375-18 NEF
.498 .498 1.259 1.765 1.585 1.4375-18 NEF
Class “A” (SR), “E” (SR), “P” (SR), MS / “F”
Class “E”, MS / “E”
Class “P”, MS / “P”
Class “W”, “J”
L
D
Shell
C
D
G
H
L
N
L
N
D
L
N
N
XL
Size Thread Min.
Max.
Max.
Max.
Max.
Max.
Max.
Min.
Max.
Max.
Closed
–
Free
–
Max.
Max.
Max.
6
8
–
–
–
–
–
–
1.266
1.266
1.266
1.266
1.266
1.266
1.266
1.516
1.516
1.578
.440
.560
.192
.317
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.656
1.656
1.717
.484
.608
–
–
–
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
.240
.302
.428
.552
.615
.740
.740
.928
.990
.125
.188
.312
.375
.500
.625
.625
.750
.800
.812
1.922
1.922
1.922
1.922
2.047
2.078
2.344
2.344
2.406
.550
.168
.205
.338
.416
.550
.600
.635
.670
.740
.230
.312
.442
.539
.616
.672
.747
.846
.894
1.705
1.705
1.848
2.040
2.256
2.486
2.922
3.086
3.310
.547
.675
.812
.940
1.067
1.194
1.322
1.449
1.576
2.271
2.271
2.411
2.599
2.943
3.172
3.610
3.766
3.985
10
12
14
16
18
20
22
24
.875
.675
.685
.434
.734
1.000
1.125
1.188
1.438
1.438
1.625
1.719
.803
.813
.548
.858
.920
.930
.673
.984
1.047
1.165
1.290
1.418
1.543
1.057
1.175
1.301
1.430
1.555
.798
1.110
1.234
1.360
1.484
1.610
.899
1.024
1.149
1.274
All dimensions for reference only.
14
PT01 (MS3111)
cable connecting receptacle
L
S
M
Q
Y
S
A
“W” Cable Seal
L
K
Z
TERMINATION ASSEMBLIES
“A” General Duty
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
“E” Open Wire Seal
“P” Potting Boot
N
D
L
L
L
L
V
PT01W-XX-XXX
N
D
G D H
N
D
N
N
“J” Cable Seal
XL
C
.375 MIN
PT01A-XX-XXX
PT01A-XX-XXX (SR)
PT01E-XX-XXX (SR)
PT01P-XX-XXX (SR)
MS3111F-XX-XXX
PT01E-XX-XXX
MS3111E-XX-XXX
PT01P-XX-XXX
MS3111P-XX-XXX
N
D
Note: This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 27.
PT01J-XX-XXX
MS3111J-XX-XXX
Recept. Front View
Receptacle Side View
M
Class “A”,
A
K
Q
V
Shell
Size
S
±.020
Y
±.020
+.001
–.005
+.020
–.010
L
Max.
+.016
–.000
Thread
Class 2A
Z
D
L
Max.
N
Max.
Thread
Class A
Max.
.948
.948
.948
.948
.948
.948
.948
1.166
1.166
1.166
Min.
.175
.297
.421
.546
.663
.787
.879
1.041
1.135
1.259
6
8
.688
.812
.812
.938
.348
.473
.494
.494
.494
.494
.494
.494
.494
.650
.650
.683
.906
.906
.400
.400
.400
.400
.400
.400
.400
.535
.535
.568
.3125-32 NEF
.4375-28 UNEF
.5625-24 NEF
.6875-24 NEF
.8125-20 UNEF
.9375-20 UNEF
1.0625-18 NEF
1.1875-18 NEF
1.3125-18 NEF
1.4375-18 NEF
1.553
1.553
1.553
1.553
1.553
1.553
1.553
1.703
1.703
1.765
.462
.590
.3750-32 NEF
.5000-28 UNEF
.6250-24 NEF
.7500-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.1875-18 NEF
1.1875-18 NEF
1.4375-18 NEF
1.4375-18 NEF
10
12
14
16
18
20
22
24
.938
1.062
1.156
1.250
1.344
1.438
1.562
1.688
1.812
.590
.906
.717
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.750
.906
.834
.875
.906
.970
1.000
1.125
1.250
1.375
1.500
.906
1.088
1.216
1.332
1.460
1.585
.906
1.125
1.125
1.188
Class “A” (SR), “E” (SR), “P” (SR), MS / “F”
Class “E”, MS / “E”
Class “P”, MS / “P”
Class “W”, “J”
L
D
Shell
C
D
G
H
L
N
L
N
D
L
N
N
XL
Size Thread Min.
Max.
Max.
Max.
Max.
Max.
Max.
Min.
Max.
Max.
Closed
Free
–
Max.
Max.
Max.
6
8
–
–
–
–
–
–
1.266
1.266
1.266
1.266
1.266
1.266
1.266
1.516
1.516
1.578
.440
.560
.192
.317
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.656
1.656
1.717
.484
.608
–
–
–
–
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
.240
.302
.428
.552
.615
.740
.740
.928
.990
.125
.188
.812 1.922
.875 1.922
.550
.675
.803
.920
.168
.205
.338
.416
.550
.600
.635
.670
.740
.230
.312
.442
.539
.616
.672
.747
.846
.894
1.705
1.705
1.848
2.040
2.256
2.486
2.922
3.086
3.310
.547
.675
.812
.940
1.067
1.194
1.322
1.449
1.576
2.271
2.271
2.411
2.599
2.943
3.172
3.610
3.766
3.985
10
12
14
16
18
20
22
24
.685
.434
.734
.312 1.000 1.922
.375 1.125 1.922
.813
.548
.858
.930
.673
.984
.500 1.188 2.047 1.047
.625 1.438 2.078 1.165
.625 1.438 2.344 1.290
.750 1.625 2.344 1.418
.800 1.719 2.406 1.543
1.057
1.175
1.301
1.430
1.555
.798
1.110
1.234
1.360
1.484
1.610
.899
1.024
1.149
1.274
All dimensions for reference only.
15
PT02 (MS3112)
SP02
box mounting receptacle
S
R
(TP)
L
PT
.120 .005 Dia.
M
(.147 .005 Dia.ꢀ size 24)
SP
.150 .005 Dia.
4 Holes
R
A
N
S
(TP)
K
Z
PT02A-XX-XXX
SP02A-XX-XXX
* PT02C-XX-XXX
* SP02C-XX-XXX
* PT02E-XX-XXX
* SP02E-XX-XXX
MS3112E-XX-XXX
* PT02P-XX-XXX
* SP02P-XX-XXX
MS3112P-XX-XXX
* PT02W-XX-XXX
* SP02W-XX-XXX
To complete part number see how to order on page 27.
■
(MMC) located within .0025 of (TP)
*
The PT02 and SP02 box mounting receptacles are made only to complete a series;
no provision is made for accessories or potting on the rear skirt.
Receptacle Front View
Receptacle Side View
K
M
R
(TP)
+.020
–.010
+.010
–.000
Z
Max.
A
+.001
–.005
N
Dia.
Max.
S
Shell
Size
L
PT
.469
SP
PT
SP
PT
SP
Max.
.825
PT
SP
PT
SP
6
8
.641
.688
.953
.348
.473
.493
.493
.493
.493
.493
.493
.493
.650
.650
.683
.524
.524
.524
.524
.524
.524
.524
.650
.650
.683
.431
.431
.431
.431
.431
.431
.431
.556
.556
.589
.462
.462
.462
.462
.462
.462
.462
.556
.556
.589
.323
.449
.465
.465
.465
.465
.465
.465
.465
.526
.526
.493
.438
.438
.438
.438
.438
.438
.438
.531
.531
.497
.594
.734
.812
1.047
1.125
1.250
1.344
1.438
1.516
1.672
1.750
1.875
.825
10
12
14
16
18
20
22
24
.719
.812
.938
.590
.825
.573
.812
.938
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.750
.825
.699
.906
1.031
1.125
1.203
1.297
1.375
1.500
.875
.825
.823
.969
1.000
1.125
1.250
1.375
1.500
.825
.949
1.062
1.156
1.250
1.375
.825
1.073
1.199
1.323
1.449
1.076
1.076
1.109
All dimensions for reference only.
16
PT06 (MS3116)
SP06
straight plug
S
L
J
Z
Q
“W” Cable Seal
L
TERMINATION ASSEMBLIES
“A” General Duty
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
“E” Open Wire Seal
“P” Potting Boot
L
L
L
L
N
D
V
N
D
G D H
N
D
N
N
PT06W-XX-XXX
SP06W-XX-XXX
PTG06W-XX-XXX
C
“J” Cable Seal
.375 MIN
XL
PT06A-XX-XXX
SP06A-XX-XXX
PTG06A-XX-XXX
PT06A-XX-XXX (SR)
SP06A-XX-XXX (SR)
PTG06A-XX-XXX (SR)
PT06E-XX-XXX (SR)
SP06E-XX-XXX (SR)
PTG06E-XX-XXX (SR)
PT06P-XX-XXX (SR)
SP06P-XX-XXX (SR)
PTG06P-XX-XXX (SR)
MS3116F-XX-XXX
PT06E-XX-XXX
SP06E-XX-XXX
PTG06E-XX-XXX
MS3116E-XX-XXX
PT06P-XX-XXX
SP06P-XX-XXX
PTG06P-XX-XXX
MS3116P-XX-XXX
N
D
PT06J-XX-XXX
MS3116J-XX-XXX
To complete part number see how to order on page 27.
Plug Front View
Plug Side View
Q Thread
Class 2A
Class “A”
Shell
Size
S
Max.
L
Max.
Z
Max.
D
Min.
L
Max.
N
Max.
V Thread
Class A
J
6
8
.625
.750
.353
.353
.353
.353
.353
.353
.353
.415
.415
.415
.906
.906
.3125-32 NEF
.4375-28 UNEF
.5625-24 NEF
.6875-24 NEF
.8125-20 UNEF
.9375-20 UNEF
1.0625-18 NEF
1.1875-18 NEF
1.3125-18 NEF
1.4375-18 NEF
.594
.594
.594
.594
.594
.594
.594
.672
.672
.672
.175
1.609
1.609
1.609
1.609
1.609
1.609
1.609
1.656
1.656
1.750
.462
.590
.3750-32 NEF
.5000-28 UNEF
.6250-24 NEF
.7500-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.1875-18 NEF
1.1875-18 NEF
1.4375-18 NEF
1.4375-18 NEF
.297
10
12
14
16
18
20
22
24*
.859
.906
.421
.717
1.013
1.156
1.281
1.319
1.531
1.656
1.776
.906
.546
.834
.906
.663
.970
.906
.787
1.088
1.216
1.332
1.460
1.587
.906
.879
1.062
1.062
1.125
1.014
1.135
1.259
Class “A” (SR), “E” (SR), “P” (SR), MS / “F”
Class “E”, MS / “E”
Class “P”, MS / “P”
Class “W”, “J”
D
Shell
C
D
G
H
L
N
L
N
D
L
N
L
N
XL
Size Thread Min.
±.010
Max.
Max.
Max.
Max.
Max.
Min.
Max.
Max.
Closed
Free
–
Max.
Max.
Max.
6
8
–
–
–
–
–
–
1.266
1.266
1.266
1.266
1.266
1.266
1.266
1.438
1.438
1.500
.440
.560
.192
.317
1.526
1.526
1.526
1.526
1.526
1.526
1.526
1.546
1.546
1.656
.484
.608
–
–
–
–
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
.240
.302
.428
.552
.615
.740
.740
.928
.990
.125
.188
.312
.375
.500
.625
.625
.750
.800
.812
1.906
1.906
1.906
1.906
2.047
2.078
2.250
2.250
2.312
.550
.168
.205
.338
.416
.550
.600
.635
.670
.740
.230
.312
.442
.539
.616
.672
.747
.846
.894
1.705
1.705
1.848
2.040
2.256
2.486
2.844
3.000
3.210
.547
2.271
2.271
2.411
2.599
2.943
3.172
3.610
3.766
3.985
10
12
14
16
18
20
22
24*
.875
.675
.685
.434
.734
.675
1.000
1.125
1.188
1.438
1.438
1.625
1.750
.803
.813
.548
.858
.812
.920
.930
.673
.984
.940
1.047
1.165
1.290
1.418
1.543
1.057
1.175
1.301
1.430
1.555
.798
1.110
1.234
1.360
1.484
1.610
1.067
1.194
1.322
1.449
1.576
.899
1.024
1.149
1.274
* Available in PT06 only
All dimensions for reference only.
17
PT07 (MS3114)
SP07
jam nut receptacle
S
H
M
Z
“A” General Duty/
“C” Pressurized Receptacle
PT07A-XX-XXX
S
A
J
PT07C-XX-XXX
R
P
K
TERMINATION ASSEMBLIES
“E” Open Wire Seal
“A” (SR), “E” (SR), “P” (SR), MS / “F” Strain Relief
“P” Potting Boot
M
Z
M
Z
M
Z
GD H
D N
N
A
A
A
J
J
J
C
L
R
R
R
P
L
P
P
L
PT07E-XX-XXX
SP07E-XX-XXX
MS3114E-XX-XXX
PT07A-XX-XXX (SR)
SP07A-XX-XXX (SR)
PT07E-XX-XXX (SR)
MS3114F-XX-XXX
PT07P-XX-XXX
MS3114P-XX-XXX
To complete part number see how to order on page 27.
Recept. Front View
Receptacle Side View
P Panel Thickness
Class “E”, MS / “E”
N
A Dia.
+.001
–.005
J Flat
+.000
–.010
K
+.011
–.010
R
Shell
Size
H
Thread
Class 2A UNEF
L
Max.
Z
±.016
S
M
Min.
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
Max.
.125
.125
.125
.125
.125
.125
.125
.250
.250
.250
Z
M
Max.
±.040
6
8
.625
.750
.812
.348
.473
.405
.530
.125
.125
.125
.125
.125
.125
.125
.156
.156
.156
.696
.696
.696
.696
.696
.696
.696
.884
.884
.917
.4375-28
.231
.231
.231
.231
.231
.231
.231
.261
.261
.228
.568
.568
.568
.568
.568
.568
.568
.630
.630
.660
.696
.696
.696
.696
.696
.696
.696
.884
.884
.917
.604
.191
.191
.191
.191
.191
.191
.191
.221
.221
.188
.938
.5625-24
.729
10
12
14
16
18
20
22
24
.875
1.062
1.250
1.375
1.500
1.625
1.812
1.938
2.062
.590
.655
.6875-24
.854
1.062
1.188
1.312
1.438
1.562
1.688
1.816
.750
.818
.8750-20
.979
.875
.942
1.0000-20
1.1250-18
1.2500-18
1.3750-18
1.5000-18
1.6250-18
1.104
1.229
1.354
1.510
1.635
1.760
1.000
1.125
1.250
1.375
1.500
1.066
1.191
1.316
1.441
1.566
Class “A” (SR), “P” (SR), MS / “F”
D
Class “E” (SR)
Class “P”, MS / “P”
Shell
Size Thread
C
C
D
Max.
D
Max.
L +.010
–.026
Max.
G
H
L
M
Thread
G
H
L
M
M
N
Z
6
8
–
–
–
–
–
–
–
–
–
–
–
–
.202
.327
.593
.593
.593
.593
.593
.593
.593
.718
.718
.718
.696
.696
.696
.696
.696
.696
.696
.884
.884
.917
.484
.191
.191
.191
.191
.191
.191
.191
.221
.221
.188
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
.250
.312
.438
.562
.625
.750
.750
.938
1.000
.125
.188
.312
.375
.500
.625
.625
.750
.800
.781
.844
.969
1.094
1.156
1.406
1.406
1.594
1.594
1.062
1.062
1.062
1.062
1.188
1.188
1.250
1.250
1.250
.696
.696
.696
.696
.696
.696
.884
.884
.917
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
.250
.312
.438
.562
.625
.750
.750
.938
1.000
.125
.188
.312
.775 1.029 .696
.837 1.029 .696
.963 1.029 .696
.608
10
12
14
16
18
20
22
24*
.444
.734
.558
.858
.375 1.087 1.029 .696
.500 1.150 1.161 .696
.625 1.400 1.161 .696
.625 1.400 1.224 .884
.750 1.587 1.224 .884
.800 1.681 1.320 .917
.683
.984
.808
1.110
1.234
1.360
1.484
1.610
.909
1.034
1.159
1.284
* Size 24 strain relief available in PT only.
All dimensions for reference only.
18
PT08 E
SP08 E
90 degree plug
G
TERMINATION ASSEMBLIES
“E” Open Wire Seal, “E” (SR) Strain Relief
“P” Potting Boot 75 degrees
L
L
E
B
A
K
H
PT08E-XX-XXX
SP08E-XX-XXX
PT08E-XX-XXX (SR)
SP08E-XX-XXX (SR)
PT08P-XX-XXX
SP08P-XX-XXX
D
C
To complete part number see how to order on page 27.
All lockwire holes are .044 Dia. Min.
Plug Front View
Plug Side View
Class “E”, “E” (SR)
Class “P”
G
C
E
Shell
Size
Dia.
Max.
B
±.031
+.010
–.025
D
±.062
+.047
–.025
L
A
±.025
H
K
±.015
L
Max.
±.057
±.015
.312
.438
.516
.625
.656
.703
.766
.812
.918
8
10
12
14
16
18
20
22
24
.796
.921
.655
.749
.169
.170
.264
.310
.330
.444
.510
.515
.656
.941
1.191
1.191
1.254
1.316
1.562
1.625
1.719
1.751
.339
.393
.450
.519
.583
.621
.683
.739
.797
1.786
1.880
1.965
2.113
2.315
2.423
2.695
2.742
2.980
.469
.547
.625
.734
.750
.781
.859
.906
1.169
.438
.562
1.656
1.781
1.843
1.953
2.000
2.046
2.218
2.265
2.624
1.046
1.171
1.297
1.422
1.562
1.672
1.797
.812
.688
.905
.781
1.030
1.015
1.077
1.139
1.265
.890
1.000
1.125
1.234
1.374
All dimensions for reference only.
19
PT Conne ctors with
Printe d Circuit Board Contacts
S
4 HOLES
.120 .005 Dia.
(.147 .005 Dia.ꢀ size 24)
L
R
M
.030 .001
(TP)
Box Mounting Receptacle (PT02)
with PCB Contacts
R
S
A
N
(TP)
Order by applicable part number in chart below;
add insert arrangement number. Refer to insert availability
on pages 4-11.
■
(MMC) located within .0025 of (TP)
Z
K
Receptacle Front View
S
Receptacle Side View
M
Part Number*
A
K
N
Z
Shell
Size
PT02 with PCB
Contacts
R
(TP)
+.011
–.010
+.001
–.005
+.021
–.010
L
Max.
+.010
–.000
Dia.
Max.
+.040
–.050
6
8
71-570120-XXX
71-570121-XXX
71-570122-XXX
71-570123-XXX
71-570124-XXX
71-570125-XXX
71-570126-XXX
71-570127-XXX
71-570128-XXX
71-570129-XXX
.469
.594
.688
.812
.348
.473
.493
.493
.493
.493
.493
.493
.493
.650
.650
.683
.825
.825
.431
.431
.431
.431
.431
.431
.431
.556
.556
.589
.323
.449
.380
.380
.380
.380
.380
.380
.380
.286
.286
.253
10
12
14
16
18
20
22
24
.719
.938
.590
.825
.573
.812
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.750
.825
.699
.906
.875
.825
.823
.969
1.000
1.125
1.250
1.375
1.500
.825
.949
1.062
1.156
1.250
1.375
.825
1.073
1.199
1.323
1.449
1.076
1.076
1.109
All dimensions for reference only.
S
H
M
Z
Jam Nut Receptacle (PT07)
with PCB Contacts
A
J
S
All lockwire holes are .044 Dia. Min.
.030 .001
Order by applicable part number in chart below;
add insert arrangement number. Refer to insert availability
on pages 4-11.
R
P
K
Receptacle Front
View
Receptacle Side View
P Panel
Part Number*
PT07 with PCB
Contacts
H
A Dia.
+.001
–.005
J Flat
+.000
–.010
K
+.011
–.010
R
Z
Thickness
Shell
Size
+.017
–.016
S
±.010
M
Thread
Class 2A
+.025
–.035
±.010
.696
.696
.696
.696
.696
.696
.696
.884
.884
.917
Min.
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
Max.
.125
.125
.125
.125
6
8
71-533720-XXX
71-533721-XXX
71-533722-XXX
71-533723-XXX
71-533724-XXX
71-533725-XXX
71-533726-XXX
71-533727-XXX
71-533728-XXX
71-533729-XXX
.625
.750
.812
.938
.348
.473
.405
.530
.125
.125
.125
.125
.125
.125
.125
.156
.156
.156
.4375-28 UNEF
.5625-24 UNEF
.6875-24 UNEF
.8750-20 UNEF
.376
.376
.376
.376
.376
.376
.376
.367
.367
.334
10
12
14
16
18
20
22
24
.875
1.062
1.250
1.375
1.500
1.625
1.812
1.938
2.062
.590
.655
1.062
1.188
1.312
1.438
1.562
1.688
1.816
.750
.818
.875
.942
.125 1.0000-20 UNEF
.125 1.1250-18 UNEF
.125 1.2500-18 UNEF
.250 1.3750-18 UNEF
.250 1.5000-18 UNEF
.250 1.6250-18 UNEF
1.000
1.125
1.250
1.375
1.500
1.066
1.191
1.316
1.441
1.566
All dimensions for reference only.
* For RoHS compliance connectors with PCB contacts change “71”- to:
“58” designates conductive black zinc cobalt plating
“93” designates non-conductive black zinc cobalt plating
20
PTB
SPB
thru bulkhead receptacle
L
S
M
PTB
.120 .005 Dia.
R
P
(TP)
(.147 .005 Dia.ꢀ size 24)
SPB
.150 .005 Dia.
4 Holes
R
S
A
A
(TP)
K
* PTB-XX-XXX
* SPB-XX-XXX
* To complete part number add desired arrangement number (refer to pages 4 and 5 for insert availability) and add “PS”;
Example: PTB-18-32PS. If a rotation is required, use PTB-18-32PS and add W, X, Y or Z. Example: PTB-18-32 PSW.
The socket end of the insert always appears at the “P” dimension end of shell.
■
(MMC) located within .0025 of (TP)
Receptacle Front View
Receptacle Side View
M
R
P
A
+.001
–.005
K
+.016
–.000
(TP)
S
Max.
Shell
Size
L
+.010
–.000
PTB
.469
SPB
.641
PTB
.688
SPB
.953
±.005
PTB
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
SPB
.188
.188
.188
.188
.188
.188
.188
.312
.312
.312
6
8
.348
.473
.625
.625
.625
.625
.625
.625
.625
.781
.781
.781
1.050
1.050
1.050
1.050
1.050
1.050
1.050
1.330
1.330
1.330
.562
.562
.562
.562
.562
.562
.562
.688
.688
.688
.594
.734
.812
1.047
1.125
1.250
1.344
1.438
1.516
1.672
1.750
1.875
10
12
14
16
18
20
22
24
.719
.812
.938
.590
.812
.938
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.750
.906
1.031
1.125
1.203
1.297
1.375
1.500
.875
.969
1.000
1.125
1.250
1.375
1.500
1.062
1.156
1.250
1.375
All dimensions for reference only.
21
PT
hermetic
Three shell styles are available in the hermetic PT bayonet
series:
•
•
•
PTIH (MS3113H)
PT02H
PT07H (MS3114H)
These hermetic connectors are only available with solder cup or
flat eyelet pin contacts in the MS/PT version. Socket contacts
are available in some proprietary PT versions. Other design
characteristics of the PT hermetic connector series are as fol-
lows:
solder
mounting
receptacle
Shell sizes: 8 through 24 (tin plated)
Contact count: 2 through 61. Refer to pages 4 and 5 for insert
availability for hermetics.
Current:
5.0 amp each #20 contact
10 amp each #16 contact
17 amp each #12 contact
Contacts are tin plated for PT; gold is optional
Dielectric Withstanding Voltage (sea level):
1500 volts (RMS) 60 cps, Service Rating I
2300 volts (RMS) 60 cps, Service Rating II
Compression glass inserts, permanently lettered
Helium Leakage: Less than 1.0 X 10-6 cc/sec.
at 15 psi differential
box
mounting
receptacle
Physical Shock: 100 G’s
Vibration: Exceeds MIL-E-5272 Procedure II
Thermal Shock: No deterioration or failure after 5 cycles
at –55°F to +257°F
Intermateability: Mates with MS3116 and PT06
Refer to pages 4-11 for insert arrangement availability.
jam nut
receptacle
22
PTIH (MS3113H)
hermetic solder mounting receptacle
L
W
G
A
N
.031 +.006
–.005
Z
*
PTIH-XX-XXX
** PTIY-XX-XXX
** MS3113H-XXCXXX
PTIH-XX-XXX (100)
†
†† PTIY-XX-XXX (100)
†† MS3113H-XXYXXX
To complete part number see how to order on page 27.
Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
Flat eyelet pin contacts without interfacial seal
*
†
†† Flat eyelet pin contacts with interfacial seal
Recept.
Front View
Receptacle
Side View
G
Dia.
Max.
A Dia.
+.001
–.005
L
N Dia.
+.001
–.005
W
+.011
–.010
Shell
Size
+.025
–.016
Z
Max.
.386
.386
.386
.386
.386
.386
.386
.386
.418
.418
6
8
.511
.636
.348
.473
.447
.447
.447
.447
.447
.447
.447
.509
.509
.542
.438
.562
.094
.094
.094
.094
.094
.094
.094
.094
.125
.125
10
12
14
16
18
20
22
24
.761
.590
.672
.855
.750
.781
.980
.875
.906
1.105
1.229
1.323
1.449
1.574
1.000
1.125
1.250
1.375
1.500
1.031
1.156
1.250
1.375
1.500
All dimensions for reference only.
23
PT02H
hermetic box mounting receptacle
PT
S
.120 .005 Dia.
R
L
W
(.147 .005 Dia.ꢀ size 24)
(TP)
SP
.150 .005 Dia.
4 Holes
R
S
A
N
Z
(TP)
U
*
PT02H-XX-XXX
** PT02Y-XX-XXX
PT02H-XX-XXX (100)
†† PT02Y-XX-XXX (100)
†
To complete part number see how to order on page 27.
Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
*
†
■
(MMC) located within .0025 of (TP)
Receptacle Front View
Receptacle Side View
A Dia.
+.001
–.005
L
N Dia.
+.001
–.005
U
+.011
–.010
Shell
Size
R
(TP)
S
±.016
K
±.015
+.025
–.015
Z
Max.
6
8
.469
.594
.688
.812
.348
.473
.047
.047
.047
.047
.047
.047
.047
.047
.079
.079
.494
.494
.494
.494
.494
.494
.494
.556
.556
.588
.438
.562
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.344
.344
.344
.344
.344
.344
.344
.344
.377
.377
10
12
14
16
18
20
22
24
.719
.938
.590
.672
.812
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.750
.781
.906
.875
.906
.969
1.000
1.125
1.250
1.375
1.500
1.031
1.156
1.250
1.375
1.500
1.062
1.156
1.250
1.375
All dimensions for reference only.
24
PT07H (MS3114H)
hermetic jam nut receptacle
S
H
M
Z
S
A
R
P
K
*
PT07H-XX-XXX
** PT07Y-XX-XXX
** MS3114H-XXCXXX
†
PT07H-XX-XXX (100)
†† PT07Y-XX-XXX (100)
†† MS3114H-XXYXXX
To complete part number see how to order on page 27.
Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
Flat eyelet pin contacts without interfacial seal
*
†
†† Flat eyelet pin contacts with interfacial seal
Receptacle Front
View
Receptacle Side View
P Panel Thickness
H Hex
+.017
–.016
A
+.001
–.005
K
+.043
–.016
M
+.031
–.000
R
Shell
Size
S
+.016
Thread
Class 2A
Z
Max.
Max.
.125
.125
.125
.125
.125
.125
.125
.250
.250
.250
Min.
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
6
8
.812
.938
.625
.750
.348
.473
.094
.094
.094
.094
.094
.094
.094
.125
.125
.125
.696
.696
.696
.696
.696
.696
.696
.884
.884
.917
.4375-28 UNEF
.5625-24 NEF
.6875-24 NEF
.8750-20 UNEF
1.0000-20 UNEF
1.1250-18 NEF
1.2500-18 NEF
1.3750-18 NEF
1.5000-18 NEF
1.6250-18 NEF
.206
.206
.206
.206
.206
.206
.206
.081
.081
.048
10
12
14
16
18
20
22
24
1.062
1.250
1.375
1.500
1.625
1.812
1.938
2.062
.875
.590
1.062
1.188
1.312
1.438
1.562
1.688
1.812
.750
.875
1.000
1.125
1.250
1.375
1.500
All dimensions for reference only.
25
PT Bre akawa y
twist pull plug
4.500
±.250
The PT miniature breakaway connector has the follow-
ing design features:
L
J
+.010
–.025
• solder contacts, potted termination
.016
SOCKET INSERT
• instant decoupling of plug and receptacle with an
axial pull on the lanyard when they are fully mated
• intermateable with standard receptacles
• operating voltage to 900 VAC (RMS) at sea level
• same quick positive bayonet coupling and 5 key/
keyway polarization as other PT styles
+.010
–.025
.328
PIN INSERT
H
B
LANYARD PULLED TAUT
AGAINST A .200 ±.031 DIA MANDREL
A
Breakaway Plug
with PT Solder Contacts,
Potted Termination
71-3048XX-(
72-3048XX-(
)
)
Part
Number*
Shell
Size
A Dia.
Max.
B
Max.
H
±.016
J
L
Max.
±.010
71-304808
71-304810
71-304812
71-304814
71-304816
71-304818
71-304820
71-304822
71-304824
8
.875
1.125
1.281
1.438
1.562
1.718
1.875
2.031
2.156
.984
1.125
1.406
1.562
1.688
1.844
2.000
2.188
2.312
.327
.444
.353
.353
.353
.353
.353
.353
.415
.415
.415
1.937
1.890
1.906
1.953
2.000
2.031
2.234
2.328
2.359
10
12
14
16
18
20
22
24
.558
.683
.808
.909
1.034
1.159
1.284
All dimensions for reference only.
* See Finish information below to determine prefix 71 or 72 in part number.
Drawing above shows standard lanyard length.
Order by Amphenol Propriety number as follows (example part number shown):
71 -
3048 18
-
32
P
1
2
3
4
1. Finish
“71”designates corrosion resistant olive drab cadmium plate
“72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and
corrosion resistance, 500 hour extended salt spray.
2. Connector Type Identification
3048 designates PT plug, solder, potted termination style
3. Shell Size and Insert Arrangement Number
See insert arrangement availability for Miniature Breakaway connectors on page 6. The numbers in the insert
arrangement are hyphenated. The number preceding the hyphen is the shell size. The number following the hyphen is
the insert arrangement number.
4. Contact Type/Alternate Insert Rotation
Pin Contacts
Socket Contacts
P designates pin, S designates socket for normal
positioning of inserts. When an alternate position
of the insert is required to prevent cross-mating
a different letter (other than P or S) is used. See
page 7 for description of alternate positions; then
convert to Amphenol proprietary coding by the
chart at right to complete the part number.
Amphenol Equates to Amphenol Equates to
Letter
MS letter
PW
Letter
MS letter
SW
G
I
H
J
PX
SX
K
M
PY
L
SY
PZ
N
SZ
26
PT, SP, MS/PT
how to order
PT, SP
MS/PT
MIL-C-26482, Series 1
Part number MS3110E20-41PW is shown as follows:
To more easily illustrate ordering procedure, part number PT00A-20-41PW(SR) is
shown as follows:
PT
00
A
-
20
-
41
P
W
(SR)
MS
311
0
E
20
-
41
P
W
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
See code below:
1. Connector Type
For Hermetic connectors part number
MS3113H20Y41PW is shown as follows:
“PT” designates standard olive drab, electrically conductive cadmium plate
bayonet lock connector with solder contacts
“SP” designates electrically non-conductive, hard anodic coated bayonet lock
connector with solder contacts and larger flange and mounting holes for
back panel mounting
MS
311
3
H
20 Y 41
P
7
W
8
1
2
3
4
5, 6
See code below:
1. “MS” designates Military Standard
2. Specification Number
“PTG” designates plug with grounding fingers
2. Shell Style
“311” designates basic family number for MIL-C-
26482, Series 1 solder type
3. Shell Style
“00”
“01”
“02”
“06”
“07”
“08”
“B”
designates wall mounting receptacle
designates cable connecting receptacle**
designates box mounting receptacle
designates straight plug
“0” designates wall mounting receptacle
“1” designates cable connecting receptacle**
“2” designates box mounting receptacle
“3” designates solder mount receptacle (hermetic
only)
designates jam nut receptacle
designates 90 degree plug cable support
designates thru bulkhead receptacle (pressurized)
designates solder mount receptacle (Hermetic only)
“I”
“4” designates jam nut receptacle
“6” designates straight plug
3. Service Classes
“A”
“C”
“E”
“J”
designates general duty back shell
designates pressurized receptacle
designates environmental resisting open wire seal with grommet and nut
designates clamp assembly for moisture proofing multi-jacketed cables,
with strain relief
designates assembly with potting boot
designates clamp assembly for moisture proofing multi-jacketed cables
designates hermetic* without interfacial seal
4. Service Class
“E” designates environmental resisting connector
“F” designates environmental resisting connectors
with strain relief
“J” designates clamp assembly for moisture proofing
multi-jacketed cables, with strain relief
“P” designates potted type with potting boot
“H” designates hermetic
“P”
W”
“H”
“Y”
5. Shell Size
designates hermetic* with interfacial seal
“20” designates shell size. Shell sizes 8 through 24
available.
4. Shell Size
“20” designates shell size. Shell sizes 6 through 24 available.
6. Insert Arrangement - Refer to pages 4-11 for insert
availability.
5. Insert Arrangement - Refer to pages 4-11 for insert availability.
“20 - 41” designates insert arrangement. (The number following the hyphen is
the number only that is used in the part number).
6. Contacts
“20 - 41” designates arrangement. (The number fol-
lowing the hyphen is the number only that is used in
the part number).
“P” designates pin contacts
“S” designates socket contacts
Hermetic version
“20Y41” designates insert arrangement; specify “Y”
for flat eyelet pin contacts, or “C” for solder cup pin
contacts
For ordering connectors with printed circuit board contacts, see pg. 20.
7. Insert Rotation - Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “normal position.
No letter required for normal (no rotation) position.
8. “SR” designates a strain relief clamp.
7. Contact Configuration
“P” designates pin contacts
“S” designates socket contacts
Indicate optional finishes as follows:
8. Insert Rotation- Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in it
shell from “normal” position. No letter require fo nor-
mal (no rotation) position.
(003) olive drab cadmium plate (standard on “PT”)
(005) anodic coating - Alumilite® (standard on “SP”)
(014) olive drab cadmium plate over nickel
(023) electroless nickel
(024) olive drab zinc cobalt plating
(424) electroless nickel finish with strain relief
(466) olive drab zinc cobalt plating with strain relief
(100) Suffix added for flat eyelet pin contacts in hermetic versions
*
Hermetic connectors are supplied with tin plated shells.
** This connector style is sometimes referred to as a cable connect-
ing “plug”. It does, however, mate with either a straight or 90
degree plug.
OR
h
RoHS Compliant finish suffix as follow:
(025) non-conductive black zinc cobalt plating
(027) conductive black zinc cobalt plating
(470) non-conductive black zinc cobalt plating
with strain relief
(476) conductive black zinc cobalt plating with strain relief
For ordering Miniature Breakaway PT Solder connec-
tors see pg. 26.
2
27
Amphe nol ® PT-SE, SP-SE, MS/PT-SE
Proprietary/MIL-C-26482, Series 1
bayonet coupling and crimp termination
Amphenol® SE crimp type miniature connectors provide
performance and versatility needed for applications
demanding high reliability and crimp removable contacts.
These crimp contacts are rear insertable/front release and
are held in position by an MS approved spring tower reten-
tion system.
wall mounting
receptacle
The MS/PT-SE Series is qualified to MIL-C-26482, Series 1 and
has all the outstanding design characteristics and quality of the
PT Series.
The SP-SE Series is a modification of the PT-SE, providing
special shells with a wide mounting flange for back panel
mounting.
cable
connecting
receptacle*
A corrosion resistant electrically conductive finish of cadmium
plate with an olive drab chromate after-treatment is used on the
PT-SE and MS/PT-SE. The SP-SE is given a durable non-con-
ductive hard anodic “Alumilite”® coating which provides abra-
sion protection and resistance to corrosion.
Shell components for these series are aluminum. The depend-
able 5 key/keyway polarization with bayonet lock coupling
assures positive mating with no chance of cross plugging.
Spring tension provided by a wave washer in the coupling nut
ensures maintenance of interfacial seal between mating halves.
box mounting
receptacle
Both the insert and main joint gasket are molded from resilient
neoprene. This provides excellent moisture sealing at the gas-
ket and superior electrical isolation of the contact in the insert.
Both pins and sockets are machined from a copper alloy and
are gold plated. This gold plating eliminates contact corrosion
and offers an indefinite shelf life. Socket contacts for these
series are a closed entry design.
straight plug
Breakaway style plug is available in PT-SE crimp.
The PT-SE, SP-SE and MS/PT-SE Series are intermateable
and intermountable with all existing Miniature Cylindrical Series
connectors except for the threaded coupling PC Series.
jam nut
receptacle
Refer to pages 4-11 for insert arrangement availability.
*
This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
breakaway
twist pull
plug
28
PT-SE. SP-SE, MS/PT-SE
Contact Specifications
Maximum
Millivolt
Drop†
Contact
Size
Test
Current
Crimp Well
Diameter
Minimum
Well Depth
20
16
12
7.5
13.0
23.0
55
49
42
.049 ±.001
.067 ±.001
.100 ±.002
.267
.236
.236
“SE”,
MS / “E”
Service Rating
open wire seal
Recommended
Operating
Test Voltage AC (RMS), 60 cps
Service
Rating
AC Voltage
at Sea Level
Sea
Level
50,000 70,000 110,000
ft.
ft.
ft.
I
600
1,500
2,300
500
750
375
500
200
200
II
1,000
† Silver plated wire per MIL-C-26482
PT-SE and SP-SE Service Classes
PT-SE and SP-SE connectors are available in the
three service classes listed below.
“SE” (SR),
MS / “F”
strain relief
clamp
“SE”
Open wire sealing - environmental resistant,
with a nut and grommet for moisture proof-
ing individual wires
“SE” (SR)Strain relief clamp - environmental resistant
strain relief clamp and grommet for moisture
proofing individual wires; provides added
wire bundle support
“SP”
Translucent nylon boot for retaining cus-
tomer applied potting compounds; held in
place by a threaded ring
Breakaway style - see page 38.
MS/PT-SE Service Classes
“SP”,
MS / “P”
potting boot
MS-SE series connectors are available in the following
certified service classes:
“E”
Open wire sealing - environmental resisting
connectors are supplied with a multi-hole
grommet and clamping nut for moisture
proofing individual open wires
“F”
“P”
Environmental resistant strain relief clamp
and grommet for moisture proofing individual
wires; provides added wire bundle support
Potting applications - these connectors are
supplied with a translucent nylon boot for
retention of customer applied potting com-
pound
29
PT00 SE (MS3120)
SP00 SE
wall mounting receptacle
S
T Dia.
R
4 Holes
(TP)
R
S
(TP)
TERMINATION ASSEMBLIES
“SE” (SR), MS / “F” Strain Relief
“SE” Open Wire Seal
“SP” Potting Boot
L
L
L
M
K
A
N
A
D N
A
G
N
M
K
M
K
PT00SE-XX-XXX
SP00SE-XX-XXX
MS3120E-XX-XXX
PT00SE-XX-XXX (SR)
SP00SE-XX-XXX (SR)
MS3120F-XX-XXX
PT00SP-XX-XXX
SP00SP-XX-XXX
To complete part number see how to order on page 39.
(MMC) located within .005 of (TP)
■
Receptacle Front View
Receptacle Side View
M
R
(TP)
S
Max.
T Dia.
± .005
+.010
–.000
P*
A Dia.
+.001
–.005
Max. Panel Thickness
Shell
Size
K
±.016
PT
.594
SP
PT
SP
PT
SP
PT
SP
PT
SP
8
10
12
14
16
18
20
22
24
–
.828
–
.120
.120
.120
.120
.120
.120
.120
.120
.147
–
.473
.590
.062
.062
.062
.062
.062
.062
.094
.094
.094
.431
.431
.431
.431
.431
.431
.556
.556
.589
–
.094
.094
.094
.094
.094
.094
.219
.219
.219
–
.719
.812
.938
1.031
1.125
1.203
1.297
1.375
1.500
.954
1.141
1.266
1.360
1.453
1.532
1.688
1.766
1.891
.150
.150
.150
.150
.150
.150
.150
.150
.462
.462
.462
.462
.462
.556
.556
.589
.125
.125
.125
.125
.125
.219
.219
.219
.812
1.047
1.141
1.234
1.328
1.453
1.578
1.703
.750
.906
.875
.969
1.000
1.125
1.250
1.375
1.500
1.062
1.156
1.250
1.375
Class “SE”, MS / “E”
Class “SE” (SR), MS / “F”
Class “SP”, MS / “P”
Shell
Size
L
Max.
N Dia.
Max
G
Dia.
L
Max.
N
Max.
D Dia.
Max.
L
Max.
N Dia.
Max.
8
10
12
14
16
18
20
22
24
1.328
1.328
1.328
1.328
1.328
1.328
1.359
1.359
1.422
.560
.704
.125
.188
.312
.375
.500
.625
.625
.750
.800
2.422
2.422
2.422
2.422
2.537
2.537
2.824
2.824
2.900
.781
.844
–
–
–
.444
.558
.683
.808
.909
1.034
1.159
1.284
1.656
1.656
1.656
1.656
1.656
1.750
1.750
1.782
.734
.825
.969
.858
.954
1.094
1.156
1.406
1.406
1.594
1.688
.984
1.080
1.204
1.330
1.454
1.580
1.110
1.234
1.360
1.484
1.610
* Back panel mounting
All dimensions for reference only.
30
MF00 SE (MS3128)
wall mounting receptacle
T¹ Dia.
4 Holes
S
R¹
(TP)
R
(TP)
R
R¹
S
(TP) (TP)
T Dia.
4 Holes
TERMINATION ASSEMBLIES
MS / “E” Open Wire Seal
MS / “F” Strain Relief
L
K
L
M
N
A
A
G F N
M
K
MF00SE-XX-XXX
MS3128E-XX-XXX
MF00SE-XX-XXX (SR)
MS3128F-XX-XXX
To complete part number see how to order on page 39.
(MMC) located within .0025 of (TP)
■
Receptacle Front View
Receptacle Side View
Class MS / “E”
Class MS / “F”
A Dia.
+.001
–.005
M
+.010
–.000
Shell
Size
S
Max.
T Dia.
T1 Dia.
±.005
K
±.016
L
N
F
G
Dia.
L
Max.
N
Max.
R
R1
±.005
.120
.120
.120
.120
.120
.120
.120
.147
Max.
Max.
Min.
10
12
14
16
18
20
22
24
.719
.812
1.141
1.266
1.360
1.453
1.532
1.688
1.766
1.891
.150
.150
.150
.150
.150
.150
.150
.150
.590
.750
.062
.062
.062
.062
.062
.094
.094
.094
.462
.462
.462
.462
.462
.556
.556
.589
1.328
1.328
1.328
1.328
1.328
1.359
1.359
1.422
.685
.813
.297
.422
.547
.609
.734
.734
.922
.984
.188
.312
.375
.500
.625
.625
.750
.800
1.906
1.906
1.906
2.000
2.000
2.172
2.172
2.234
.891
1.016
1.141
1.203
1.469
1.469
1.656
1.750
.812
.938
.906
1.031
1.125
1.203
1.297
1.375
1.500
.875
.930
.969
1.000
1.125
1.250
1.375
1.500
1.057
1.175
1.301
1.428
1.533
1.062
1.156
1.250
1.375
All dimensions for reference only.
31
PT01 SE (MS3121)
SP01 SE
cable connecting receptacle
S
S
TERMINATION ASSEMBLIES
“SE” (SR), MS / “F” Strain Relief
“SE”, MS / “E” Open Wire Seal
“SP”, MS / “P” Potting Boot
L
L
L
N
A
G
N
A
D
N
A
K
K
K
PT01SE-XX-XXX
SP01SE-XX-XXX
MS3121E-XX-XXX
PT01SE-XX-XXX (SR)
SP01SE-XX-XXX (SR)
MS3121F-XX-XXX
PT01SP-XX-XXX
SP01SP-XX-XXX
MS3121P-XX-XXX
Note: This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 39.
Receptacle
Front View
Receptacle
Side View
Class “SE”, MS / “E”
Class “SE” (SR), MS / “F”
Class “SP”, MS / “P”
A Dia.
+.001
–.005
N
Dia.
Max.
N
Dia.
Max.
Shell
Size
S
Max.
K
±.018
L
Max.
G
Dia.
L
Max.
N
Max.
D
Dia.
L
Max.
8
10
12
14
16
18
20
22
24
.812
.955
.473
.590
.094
.094
.094
.094
.094
.094
.115
.115
.115
1.522
1.522
1.522
1.522
1.522
1.522
1.709
1.709
1.709
.560
.685
.125
.188
.312
.375
.500
.625
.625
.750
.800
2.422
2.422
2.422
2.422
2.537
2.537
2.824
2.824
2.900
.828
.891
–
–
–
.444
.558
.683
.808
.909
1.034
1.159
1.284
1.656
1.656
1.656
1.656
1.656
1.750
1.750
1.782
.734
1.048
1.142
1.236
1.329
1.455
1.579
1.709
.750
.813
1.016
1.141
1.203
1.469
1.469
1.656
1.750
.858
.875
.930
.984
1.000
1.125
1.250
1.375
1.500
1.057
1.175
1.301
1.428
1.555
1.110
1.234
1.360
1.484
1.610
All dimensions for reference only.
32
PT02 SE (MS3122)
SP02 SE
box mounting receptacle
S
L
R
M
(TP)
K
R
S
A
N
(TP)
T Dia.
4 Holes
D
PT02SE-XX-XXX
SP02SE-XX-XXX
MS3122E-XX-XXX
To complete part number see how to order on page 39.
(MMC) located within .0025 of (TP)
■
Receptacle Front View
Receptacle Side View
T
M
+.010
–.000
A
Dia.
+.001
N
Dia.
+.011
–.000
S
Dia.
±.005
D
Max.
R
Max.
Shell
Size
K
±.016
L
Max.
PT
SP
PT
SP
PT
SP
–
–.005
PT
SP
PT
SP
8
10
12
14
16
18
20
22
24
.594
–
.828
.954
–
.120
.120
.120
.120
.120
.120
.120
.120
.147
.473
.312
.312
.312
.312
.312
.312
.406
.406
.406
–
.062
.062
.062
.062
.062
.062
.094
.094
.094
1.296
1.296
1.296
1.296
1.296
1.296
1.358
1.358
1.358
.431
.431
.431
.431
.431
.431
.556
.556
.589
–
.438
.562
.719
.812
.938
1.031
1.125
1.203
1.297
1.375
1.500
1.141
1.266
1.360
1.453
1.532
1.688
1.766
1.891
.150
.150
.150
.150
.150
.150
.150
.150
.590
.219
.219
.219
.219
.219
.344
.344
.344
.462
.462
.462
.462
.462
.556
.556
.589
.812
1.047
1.141
1.234
1.328
1.453
1.578
1.703
.750
.688
.906
.875
.812
.969
1.000
1.125
1.250
1.375
1.500
.938
1.062
1.156
1.250
1.375
1.062
1.188
1.312
1.438
All dimensions for reference only.
33
MF02 SE (MS3127)
box mounting receptacle
T¹ Dia.
4 Holes
S
L
R¹
(TP)
M
R
K
(TP)
R
R¹
S
A
N
(TP) (TP)
T Dia.
D
4 Holes
MF02SE-XX-XXX
MS3127E-XX-XXX
To complete part number see how to order on page 39.
(MMC) located within .0025 of (TP)
■
Receptacle Front View
Receptacle Side View
N
A
Dia.
+.011
–.000
Dia.
+.001
–.005
M
+.010
–.000
Shell
Size
S
Max.
T
T1
±.005
D
Max.
K
±.016
L
R
R1
±.005
Max.
1.266
1.266
1.266
1.266
1.266
1.328
1.328
1.328
10
12
14
16
18
20
22
24
.562
.688
.719
.812
.906
.969
1.062
1.156
1.250
1.375
.812
1.141
1.266
1.360
1.453
1.532
1.688
1.766
1.891
.120
.120
.120
.120
.120
.120
.120
.147
.150
.150
.150
.150
.150
.150
.150
.150
.590
.750
.219
.219
.219
.219
.219
.344
.344
.344
.062
.062
.062
.062
.062
.094
.094
.094
.462
.462
.462
.462
.462
.556
.556
.589
.938
.812
1.031
1.125
1.203
1.297
1.375
1.500
.875
.938
1.000
1.125
1.250
1.375
1.500
1.062
1.188
1.312
1.438
All dimensions for reference only.
34
PT06 SE (MS3126)
SP06 SE
straight plug
S
TERMINATION ASSEMBLIES
“SE” (SR), MS / “F” Strain Relief
“SE”, MS / “E” Open Wire Seal
“SP”, MS / “P” Potting Boot
L
L
L
N
G N
D N
Z pin contacts
Z¹ socket contacts
Z pin contacts
Z¹ socket contacts
Z pin contacts
Z¹ socket contacts
PT06SE-XX-XXX
SP06SE-XX-XXX
PTG06SE-XX-XXX
MS3126E-XX-XXX
PT06SE-XX-XXX (SR)
SP06SE-XX-XXX (SR)
PTG06SE-XX-XXX (SR)
MS3126F-XX-XXX
PT06SP-XX-XXX
SP06SP-XX-XXX
PTG06SP-XX-XXX
MS3126P-XX-XXX
To complete part number see how to order on page 39.
Plug
Plug
Front View
Side View
Class “SE”, MS / “E”
Class “SE” (SR), MS / “F”
Class “SP”, MS / “P”
Shell
Size
S Dia.
Max.
Z
Z1
±.045
L
Max.
N
Max.
G
Dia.
L
Max.
N
Max.
D
Dia.
L
Max.
N Dia.
Max.
±.045
8*
10
12
14
16
18
20
22
24
.734
.859
.640
.640
.640
.640
.640
.640
.640
.640
.640
.579
.579
.579
.579
.579
.579
.579
.579
.579
1.328
1.328
1.328
1.328
1.328
1.328
1.297
1.297
1.359
.540
.685
.125
.188
.312
.375
.500
.625
.625
.750
.800
2.413
2.413
2.413
2.413
2.528
2.528
2.753
2.753
2.830
.828
.891
.327
.444
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.766
.578
.734
1.031
1.156
1.281
1.391
1.531
1.656
1.777
.813
1.016
1.141
1.203
1.469
1.469
1.656
1.750
.558
.858
.930
.683
.984
1.057
1.175
1.301
1.428
1.533
.808
1.110
1.234
1.360
1.484
1.610
.909
1.034
1.159
1.284
* PT-SE, MS-SE and MS-SP only.
All dimensions for reference only.
35
PT07 SE (MS3124)
SP07 SE
jam nut receptacle
S
H
S
TERMINATION ASSEMBLIES
“SE” (SR), MS / “F” Strain Relief
“SE”, MS / “E” Open Wire Seal
“SP”, MS / “P” Potting Boot
L
L
L
M
M
M
K
R
K
K
J
N
J
F N
J
A
G N
A
A
R
P
R
P
P
PT07SE-XX-XXX
SP07SE-XX-XXX
MS3124E-XX-XXX
PT07SE-XX-XXX (SR)
SP07SE-XX-XXX (SR)
MS3124F-XX-XXX
PT07SP-XX-XXX
SP07SP-XX-XXX
MS3124P-XX-XXX
To complete part number see how to order on page 39.
All lockwire holes are .044 Dia. Min.
Receptacle Front
View
Receptacle Side View
P
A Dia.
+.001
–.005
J Flat
+.000
–.010
K
+.011
–.010
R
Panel Thickness
Shell
Size
H Hex
Max.
S
Max.
M
±.005
Thread
Class 2A
Min.
.062
.062
.062
.062
.062
.062
.062
.062
.062
Max.
.125
.125
.125
.125
.125
.125
.250
.250
.250
8
10
12
14
16
18
20
22
24
.767
.892
.954
1.078
1.266
1.391
1.516
1.641
1.828
1.954
2.078
.473
.590
.530
.655
.125
.125
.125
.125
.125
.125
.156
.156
.156
.696
.696
.696
.696
.696
.696
.884
.884
.917
.5625-24 UNEF
.6875-24 NEF
1.079
1.205
1.329
1.455
1.579
1.705
1.829
.750
.818
.8750-20 UNEF
1.0000-20 UNEF
1.1250-18 NEF
1.2500-18 NEF
1.3750-18 NEF
1.5000-18 NEF
1.6250-18 NEF
.875
.942
1.000
1.125
1.250
1.375
1.500
1.066
1.191
1.316
1.441
1.566
Class “SE”, MS / “E”
Class “SE” (SR), MS / “F”
Class “SP”, MS /”P”
Shell
Size
L
Max.
N
Max.
F
Min.
G Dia.
Free
L
Max.
N
Max.
G
Dia.
L
Max.
N Dia.
Max.
8
10
12
14
16
18
20
22
24
1.438
1.438
1.438
1.438
1.438
1.438
1.625
1.625
1.688
.749
.874
.234
.297
.422
.547
.609
.734
.734
.922
.984
.125
.188
.312
.375
.500
.625
.625
.750
.800
1.922
1.922
1.922
1.922
2.000
2.000
2.172
2.172
2.234
.828
.891
–
–
–
.444
.558
.683
.808
.909
1.034
1.159
1.284
1.656
1.656
1.656
1.656
1.656
1.922
1.922
1.951
.734
.858
.984
1.110
1.234
1.360
1.484
1.610
.999
1.016
1.141
1.203
1.469
1.469
1.656
1.750
1.124
1.249
1.374
1.530
1.655
1.780
All dimensions for reference only.
36
PT08 SE
SP08 SE
90 degree plug
G
TERMINATION ASSEMBLIES
“SE” Open Wire Seal, “SE” (SR) Strain Relief
“SP” Potting Boot 75 degrees
L
L
E
B
A
K
PT08SE-XX-XXX
SP08SE-XX-XXX
PT08SE-XX-XXX (SR)
SP08SE-XX-XXX (SR)
PT08SP-XX-XXX
SP08SP-XX-XXX
H
D
C
To complete part number see how to order on page 39.
All lockwire holes are .044 Dia. Min.
Plug
Plug
Front View
Side View
Class “SE”, “SE” (SR)
Class “SP”
H
G
C
E
Shell
Size
Dia.
Max.
B
±.031
+.010
–.025
D
±.062
+.047
–.025
L
Max.
A
±.025
K
L
Max.
±.015
.438
.516
.625
.656
.703
.766
.812
.918
±.015
10
12
14
16
18
20
22
24
.921
1.046
1.171
1.297
1.422
1.562
1.672
1.797
.749
.812
.170
.264
.310
.330
.444
.510
.515
.656
1.191
1.191
1.254
1.316
1.562
1.625
1.719
1.750
.393
.450
.519
.583
.621
.683
.739
.787
2.137
2.222
2.370
2.572
2.680
2.753
2.799
3.037
.547
.625
.734
.750
.781
.859
.906
1.181
.562
2.031
2.093
2.203
2.250
2.296
2.343
2.390
2.624
.688
.905
.781
1.030
1.015
1.077
1.139
1.250
.890
1.000
1.125
1.234
1.374
All dimensions for reference only.
37
PT-SE Bre akaway
twist pull plug
4.500 ±.250
The PT-SE miniature breakaway connector has the following
design features:
L
J
D
• crimp front release, front removable contacts in “SE” spring
tower retention system
• 3 styles available: potted termination, environmental style
and environment style with a strain relief
SOCKET
INSERT
C
PIN
INSERT
• instant decoupling of plug and receptacle with an axial
pull on the lanyard when they are fully mated
• intermateable with standard receptacles
B
• operating voltage to 900 VAC (RMS) at sea level
• quick positive bayonet coupling and 5 key/keyway polarization
LANYARD PULLED TAUT
AGAINST A .200 ±.031 DIA MANDREL
A
Breakaway PT-SE with Crimp Contacts,
Environmental
4.500 ±.250
5.000 ±.250
L
L2
1
71-3455XX-(
72-3455XX-(
)
)
J
J
D
D
SOCKET
INSERT
SOCKET
INSERT
C
C
PIN
PIN
INSERT
INSERT
H
F
Breakaway PT-SE with Crimp Contacts,
Potted Termination
Breakaway PT-SE with Crimp Contacts,
Environmental with Strain Relief
71-4196XX-(
72-4196XX-(
)
)
71-2511XX-(
72-2511XX-(
)
)
Part
Number*
Part
Number*
Part
Number*
Shell
Size
A Dia.
Max.
B
Max.
C +.020 D +.020
F Dia.
±.016
H Dia.
±.016
J
L
Max.
L1
Max.
L2
Max.
–.000
.030
.030
.030
.030
.030
.092
.092
.092
–.000
.337
.337
.337
.337
.337
.399
.399
.399
±.010
71-419646
71-419647
71-419648
71-419649
71-419650
71-419651
71-419652
71-419653
71-251181
71-251182
71-251183
71-251184
71-251185
71-251186
71-251187
71-251188
71-345510
71-345512
71-345514
71-345516
71-345518
71-345520
71-345522
71-345524
10
12
14
16
18
20
22
24
1.125
1.281
1.438
1.562
1.718
1.875
2.031
2.156
1.125
1.406
1.562
1.688
1.844
2.000
2.188
2.312
.188
.312
.375
.500
.625
.625
.750
.800
.444
.558
.353
.353
.353
.353
.353
.415
.415
.415
1.875
1.875
1.906
1.969
2.000
2.281
2.344
2.406
2.140
2.156
2.203
2.250
2.281
2.359
2.453
2.453
2.156
2.406
2.406
2.531
2.531
2.719
2.844
2.906
.683
.808
.909
1.034
1.159
1.284
All dimensions for reference only.
* See Finish information below to determine prefix 71 or 72 in part number.
Drawing above shows standard lanyard length.
Order by Amphenol Propriety number as follows (example part number shown):
71 -
4196 50
-
32
P
1
2
3
4
5
1. Finish
“71” designates corrosion resistant olive drab cadmium plate
“72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hr.
extended salt spray.
2. Connector Type Identification
4196XX designates PT-SE plug, crimp, potted termination style
2511XX designates PT-SE plug, crimp, environmental with strain relief style
3455XX designates PT-SE plug, crimp, environmental
3. Shell Size
See part number columns in chart above for 2 digit number at end that correlates to the shell size. Example: ‘50’ correlates to shell size 18.
4. Insert Arrangement Number
See insert availability for Miniature Breakaway connectors on page 6. The number following the hyphen is the insert arrangement number.
5. Contact Type/Alternate Insert Rotation
Pin Contacts
Amphenol Equates to Amphenol Equates to
Socket Contacts
P designates pin, S designates socket for normal positioning of inserts. When an
alternate position of the insert is required to prevent cross-mating a different letter
(other than P or S) is used. See page 7 for description of alternate positions; then con-
vert to Amphenol proprietary coding by the chart at right to complete the part number.
Letter
G
I
MS letter
PW
PX
Letter
H
J
MS letter
SW
SX
K
M
PY
PZ
L
N
SY
SZ
38
PT-SE, SP-SE, MS/PT-SE
how to order
PT-SE, SP-SE
MS/PT-SE
MIL-C-26482, Series 1
To more easily illustrate ordering procedure, part number
MS3120E20-41PW is shown as follows:
To more easily illustrate ordering procedure, part number PT00SE-20-
41PW(SR) is shown as follows:
PT
00
SE - 20
-
41
P
W
(SR)
MS
312
0
E
20 – 41
P
W
1
2
3
4
5
6
7
8
See code below:
1
2
3
4
5
6
7
8
1. Connector Type
See code below:
“PT” designates standard olive drab, electrically conductive cadmium
plated, bayonet lock connector with crimp contacts
“MF” designates standard olive drab, electrically conductive cadmium
plated, bayonet lock connector with dual mounting holes, and
crimp contacts
“SP” designates electrically non-conductive, hard anodic coated,
bayonet lock connector with larger flange and mounting holes
for back panel mounting, and crimp contacts
1. “MS” designates Military Standard
2. Specification Number
“312” designates basic family for MIL-C-26482, Series 1
crimp type
3. Shell Style
“0”
“1”
“2”
“4”
“6”
“7”
designates wall mounting receptacle
designates cable connecting receptacle*
designates box mounting receptacle
designates jam nut receptacle
designates straight plug
“PTG” designates plug with grounding fingers
2. Shell Style
“00”
“01”
“02”
“06”
“07”
“08”
designates wall mounting receptacle
designates cable connecting receptacle*
designates box mounting receptacle
designates straight plug
designates jam nut receptacle
designates 90 degree plug
designates box mounting receptacle with dual
mounting holes
“8”
designates wall mounting receptacle with dual
mounting holes
4. Service Class
“E”
“F”
designates environmental resisting connector
designates environmental resisting connector with
strain relief
3. Service Classes
“SE” designates environmental crimp
“SP” designates potted type crimp
Both of the above are Amphenol proprietary versions of the MIL-C-
26482, Series 1 crimp contact connector and offer 15 lbs. contact reten-
tion for size 20 contacts; 25 lbs. for size 16 contacts.
4. Shell Size
“20” designates shell size. Shell sizes 8 through 24 available.
5. Insert Arrangement
Refer to pages 4-11 for insert availability.
“20 - 41” designates insert arrangement. (The number following the
hyphen is the number only that is used in the part number).
6. Contacts
“P”
designates potted type with potting boot
5. Shell Size
“20” designates shell size. Shell sizes 8 through 24 available
6. Insert Arrangement
Refer to pages 4-11 for insert availability.
“20 - 41” designates insert arrangement. (The number follow-
ing the hyphen is the number only that is used in the part
number).
7. Contacts
“P” designates pin contacts
“S” designates socket contacts
8. Insert Rotation
“P” designates pin contacts
“S” designates socket contacts
7. Insert Rotation
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from the “normal” position. No letter required for normal (no
rotation) position.
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “normal”
position. No letter required for normal (no rotation) position.
8. “SR” designates a strain relief clamp.
Indicate optional finishes as follows:
(003) olive drab cadmium plate (standard on “PT”)
(005) anodic coating - Alumilite® (standard on “SP”)
(014) olive drab cadmium plate over nickel
(023) electroless nickel
*
This connector style is sometimes referred to as a cable connecting
“plug”. It does, however, mate with either a straight or 90 degree plug.
(024) olive drab zinc cobalt plating
For ordering Miniature Breakaway PT-SE Crimp connectors
see pg. 38.
(424) electroless nickel finish with strain relief
(466) olive drab zinc cobalt plating with strain relief
OR
RoHS Compliant finish suffix as follow:
(025) non-conductive black zinc cobalt plating
h
(027) conductive black zinc cobalt plating
(470) non-conductive black zinc cobalt plating with
strain relief
2
(476) conductive black zinc cobalt with strain relief
39
Amphe nol ® PT-CE, SP-CE
bayonet coupling, crimp termination
Amphenol® CE crimp type miniature connectors provide
performance and versatility needed for applications
demanding high reliability and crimp removable contacts.
These crimp contacts are rear insertable/front release and
are held in position by a nylon wafer retention system.
wall mounting
receptacle
The SP-CE Series is a modification of the PT-CE, providing
special shells with a wide mounting flange for back panel
mounting.
A corrosion resistant electrically conductive finish of cadmium
plate with an olive drab chromate after-treatment is used on the
PT-CE. The SP-CE is given a durable nonconductive hard
anodic “Alumilite”® coating which provides abrasion protection
and resistance to corrosion.
cable
connecting
receptacle*
Shell components for these versions are aluminum. The
dependable 5 key/keyway polarization with bayonet lock cou-
pling assures positive mating with no chance of cross plugging.
Spring tension provided by a wave washer in the coupling nut
ensures maintenance of interfacial seal between mating halves.
Both the insert and main joint gasket are molded from resilient
neoprene. This provides excellent moisture sealing at the gas-
ket and superior electrical isolation of the contact in the insert.
box mounting
receptacle
Both pins and sockets are machined form a copper alloy and
are gold plated. This gold plating eliminates contact corrosion
and offers an indefinite shelf life. Socket contacts for these
series are a closed entry design.
Breakaway style plug is available in PT-CE crimp.
The PT-CE and SP-CE Series are intermateable and inter-
mountable with all existing Miniature Cylindrical Series connec-
tors except for the threaded coupling PC Series.
straight plug
Refer to pages 4-11 for insert arrangement availability.
*
This connector style is sometimes referred to as a cable connecting “plug.” It
does, however, mate with a straight or 90 degree plug.
jam nut
receptacle
breakaway
twist pull
plug
40
PT-CE, SP-CE
Contact Specifications
Maximum
Contact
Size
Test
Current
Millivolt
Drop†
Crimp Well
Diameter
Minimum
Well Depth
+.002
.045
20
16
7.5
55
49
.359
.234
–.001
+.004
.063
13.0
–.001
“CE”
open wire seal
Service Rating
Recommended
Operating
Test Voltage AC (RMS), 60 cps
Service
Rating
AC Voltage
at Sea Level
Sea
Level
50,000 70,000 110,000
ft.
ft.
ft.
I
600
1,500
2,300
500
750
375
500
200
200
II
1,000
†
Silver plated wire per MIL-C-26482
PT-CE, and SP-CE Service Classes
PT-CE and SP-CE Connectors are available in the
three service classes listed below.
“CE” (SR)
strain relief
“CE”
Open wire sealing – environmental resistant,
with a nut and grommet for moisture proof-
ing individual wires.
“CE” (SR)Strain relief clamp – environmental resistant
strain relief clamp and grommet for moisture
proofing individual wires; provides added
wire bundle support.
“CP”
Translucent nylon boot for retaining cus-
tomer applied potting compounds; held in
place by a threaded ring.
Breakaway style - see page 48.
“CP”
potting boot
41
PT00 CE
SP00 CE
wall mounting receptacle
S
PT
.120 .005 Dia.
(.147 .005 Dia.ꢀ size 24)
R
(TP)
SP
.150 .005 Dia.
4 Holes
R
S
(TP)
TERMINATION ASSEMBLIES
“CE” (SR) Strain Relief
“CE” Open Wire Seal
“CP” Potting Boot
L
L
L
K
K
K
A
D N
N
A
G
H
A
M
M
M
PT00CE-XX-XXX
SP00CE-XX-XXX
PT00CE-XX-XXX (SR)
SP00CE-XX-XXX (SR)
PT00CP-XX-XXX
SP00CP-XX-XXX
To complete part number see how to order on page 49.
■
(MMC) located within .005 Dia. of (TP)
Receptacle Front View
Receptacle Side View
K
+.025
–.010
M
+.010
–.000
Class “CE”
N
Class “CE” (SR)
Class “CP”
A
Dia.
+.001
–.005
R
(TP)
S
±.016
N
Dia.
Max.
Shell
Size
L
Dia.
G
H
L
D
Dia.
L
Max.
PT
SP
PT
.688
SP
PT
SP
PT
SP
Max.
Max.
Dia.
Max.
Max.
6
.469
.594
.719
.812
.641
.734
.812
.953
.348 .493 .524 .431 .462 1.468
.473 .493 .524 .431 .462 1.468
.590 .493 .524 .431 .462 1.468
.750 .493 .524 .431 .462 1.468
.875 .493 .524 .431 .462 1.468
.440
–
–
–
–
–
–
8
.812 1.047
.938 1.125
.560 .125
.685 .188
.813 .312
.797 2.031
.859 2.031
.984 2.031
.327
.444
.558
.683
.808
.909
1.683
1.683
1.683
1.683
1.683
1.683
1.750
1.750
1.782
.608
10
12
14
16
18
20
22
24
.734
.938 1.031 1.250
.858
.906 1.031 1.125 1.344
.930 .375 1.109 2.031
.984
.969 1.125 1.219 1.438 1.000 .493 .524 .431 .462 1.468 1.057 .500 1.172 2.156
1.062 1.203 1.312 1.516 1.125 .493 .524 .431 .462 1.468 1.175 .625 1.422 2.156
1.110
1.234
1.360
1.484
1.610
1.156 1.297 1.438 1.672 1.250 .650 .650 .556 .556 1.562 1.301 .625 1.422 2.266 1.034
1.250 1.375 1.562 1.750 1.375 .650 .650 .556 .556 1.562 1.428 .750 1.609 2.266 1.159
1.375 1.500 1.688 1.875 1.500 .683 .683 .589 .589 1.625 1.555 .800 1.703 2.328 1.284
All dimensions for reference only.
42
PT01 CE
cable connecting receptacle
S
S
TERMINATION ASSEMBLIES
“CE” (SR) Strain Relief
“CE” Open Wire Seal
“CP” Potting Boot
L
L
L
A
D H
N
A
G
H
A
K
K
K
PT01CE-XX-XXX
SP01CE-XX-XXX
PT01CE-XX-XXX (SR)
SP01CE-XX-XXX (SR)
PT01CP-XX-XXX
Note:This connector style is sometimes referred to as a cable connecting
“plug”. It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 49.
Receptacle
Front View
Receptacle
Side View
Class “CE”
A Dia.
Class “CE” (SR)
H
Class “CP”
Shell
Size
S
±.016
+.001
–.005
K
±.016
L
Max.
N
Dia.
G
Dia.
L
Max.
D Dia.
Min.
L
Max.
N Dia.
Max.
Dia.
6
8
.688
.812
.348
.473
.094
.094
.094
.094
.094
.094
.094
.115
.115
.115
1.468
1.468
1.468
1.468
1.468
1.468
1.468
1.562
1.562
1.625
.440
.560
–
–
–
–
–
–
.125
.188
.312
.375
.500
.625
.625
.750
.800
.797
1.982
1.982
1.982
1.982
2.114
2.114
2.207
2.207
2.219
.327
.444
.558
.683
.808
.909
1.034
1.159
1.284
1.702
1.702
1.702
1.702
1.702
1.702
1.796
1.796
1.827
.608
10
12
14
16
18
20
22
24
.938
.590
.685
.859
.734
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.750
.813
.984
.858
.875
.930
1.109
1.172
1.422
1.422
1.609
1.703
.984
1.000
1.125
1.250
1.375
1.500
1.057
1.175
1.301
1.428
1.555
1.110
1.234
1.360
1.484
1.610
All dimensions for reference only.
43
PT02 CE
SP02 CE
box mounting receptacle
L
S
M
R
(TP)
R
S
A
H N
(TP)
T Dia.
4 Holes
D
K
PT02CE-XX-XXX
SP02CE-XX-XXX
PT02CP-XX-XXX
SP02CP-XX-XXX
To complete part number see how to order on page 49.
(MMC) located within .005 of (TP)
■
Receptacle Front View
Receptacle Side View
T
K
+.025
–.010
M
+.010
–.000
A
Dia
+.001
S
±.016
Dia.
±.005
H
Dia.
N
Dia.
Max.
R
D
Shell
L
Size
PT
SP
PT
SP
PT
SP
–.005
PT
SP
Max.
PT
SP
Max.
PT
SP
8
.594
.734
.812
.938
1.047
1.125
1.250
1.344
1.438
1.516
1.672
1.750
1.875
.120
.120
.120
.120
.120
.120
.120
.120
.147
.150
.150
.150
.150
.150
.150
.150
.150
.150
.473
.344
.344
.344
.344
.344
.344
.406
.406
.436
.312
.312
.312
.312
.312
.312
.406
.406
.436
.317
.441
.493
.493
.493
.493
.493
.493
.650
.650
.683
.524
.524
.524
.524
.524
.524
.650
.650
.683
1.250 .431
1.250 .431
1.250 .431
1.250 .431
1.250 .431
1.250 .431
1.312 .556
1.312 .556
1.312 .589
.462
.462
.462
.462
.462
.462
.556
.556
.589
.449
.573
10
12
14
16
18
20
22
24
.719
.812
.590
.812
.938
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.750
.566
.699
.906
1.031
1.125
1.203
1.297
1.375
1.500
.875
.683
.823
.969
1.000
1.125
1.250
1.375
1.500
.808
.949
1.062
1.156
1.250
1.375
.899
1.073
1.199
1.323
1.449
1.034
1.155
1.279
All dimensions for reference only.
44
PT06 CE
SP06 CE
straight plug
S
TERMINATION ASSEMBLIES
“CE” (SR) Strain Relief
“CE” Open Wire Seal
“CP” Potting Boot
L
L
L
N
G N
D N
Z pin contacts
Z¹ socket contacts
Z pin contacts
Z¹ socket contacts
Z pin contacts
Z¹ socket contacts
PT06CE-XX-XXX
SP06CE-XX-XXX
PT06CE-XX-XXX (SR)
SP06CE-XX-XXX (SR)
PT06CP-XX-XXX
SP06CP-XX-XXX
To complete part number see how to order on page 49.
Plug
Plug
Front View
Side View
Class “CE”
Class “CE” (SR)
Class “CP”
S
Z
Z1
Shell
Size
Dia.
Max.
+.035
–.040
+.035
–.040
L
N
Dia.
G
Dia.
H
Max.
L
Max.
D
Dia.
L
Max.
N Dia.
Max.
Max.
1.457
1.457
1.457
1.457
1.457
1.457
1.457
1.487
1.487
1.550
6
8
.609
.734
.772
.772
.772
.772
.772
.772
.772
.710
.710
.710
.631
.631
.631
.631
.631
.631
.631
.569
.569
.569
.440
.560
–
–
–
–
–
–
.125
.188
.312
.375
.500
.625
.625
.750
.800
.797
2.019
2.019
2.019
2.019
2.144
2.144
2.175
2.175
2.237
.327
.444
.558
.683
.808
.909
1.034
1.159
1.284
1.707
1.707
1.707
1.707
1.707
1.707
1.707
1.707
1.832
.608
10
12
14
16
18
20
22
24
.844
.685
.859
.734
1.016
1.141
1.266
1.375
1.516
1.641
1.761
.813
.984
.858
.930
1.109
1.172
1.422
1.422
1.609
1.703
.984
1.057
1.175
1.301
1.428
1.555
1.110
1.234
1.360
1.484
1.610
All dimensions for reference only.
45
PT07 CE
SP07 CE
jam nut receptacle
S
H
S
TERMINATION ASSEMBLIES
“CE” (SR) Strain Relief
“CE” Open Wire Seal
“CP” Potting Boot
M
K
L
M
K
L
M
L
K
R
R
A
R
G N
D N
J
N
J
J
A
A
P
P
P
PT07CE-XX-XXX
SP07CE-XX-XXX
PT07CE-XX-XXX (SR)
SP07CE-XX-XXX (SR)
PT07CP-XX-XX
SP07CP-XX-XXX
To complete part number see how to order on page 49.
All lockwire holes are .044 Dia. Min.
Receptacle
Front View
Receptacle
Side View
Panel Thickness
Class “CE”
Class “CE” (SR)
Class “CP”
H
A
J
Hex.
+.017
–.016
Dia.
+.001
–.005
Flat
+.000
–.010
D
Dia.
Min.
N
Dia.
Max.
Shell
Size
S
±.016
K
±.016
M
±.005
L
Max.
N
Max.
G
Dia.
L
Max.
N
Max.
L
Max.
Min.
.062
.062
.062
.062
.062
.062
.062
.062
.062
Max.
.125
.125
.125
.125
.125
.125
.250
.250
.250
8
10
12
14
16
18
20
22
24
.750
.875
.938
1.062
1.250
1.375
1.500
1.625
1.812
1.938
2.062
.473
.590
.530
.655
.125
.125
.125
.125
.125
.125
.156
.156
.156
.696
.696
.696
.696
.696
.696
.884
.884
.917
.827
.827
.827
.827
.827
.827
.733
.733
.762
.730
.855
.125
.188
.312
.375
.500
.625
.625
.750
.800
1.297
1.297
1.297
.797
.859
.984
.327
.444
.875
.875
.875
.875
.875
.875
.969
.969
.969
.608
.734
1.062
1.188
1.312
1.438
1.562
1.688
1.812
.750
.818
.980
.558
.858
.875
.942
1.105
1.230
1.355
1.511
1.636
1.761
1.297 1.109
1.422 1.172
1.422 1.422
1.328 1.422
1.328 1.609
1.422 1.703
.683
.984
1.000
1.125
1.250
1.375
1.500
1.066
1.191
1.316
1.441
1.566
.808
1.110
1.234
1.360
1.484
1.610
.909
1.034
1.159
1.284
All dimensions for reference only.
46
PT08 CE
SP08 CE
90 degree plug
G
TERMINATION ASSEMBLIES
“CE” Open Wire Seal, “CE” (SR) Strain Relief
“CP” Potting Boot 75°
L
L
E
B
A
K
PT08CE-XX-XXX
SP08CE-XX-XXX
PT08CE-XX-XXX (SR)
SP08CE-XX-XXX (SR)
PT08CP-XX-XXX
SP08CP-XX-XXX
H
D
C
To complete part number see how to order on page 49.
All lockwire holes are .044 Dia. Min.
Plug
Plug
Front View
Side View
Class “CE”, “CE” (SR)
Class “CP”
G
C
E
Shell
Size
Dia.
Max.
B
±.031
+.010
–.025
D
±.062
+.047
–.025
L
A
±.025
H
±.015
K
±.015
L
±.057
Max.
1.906
2.031
2.093
2.203
2.250
2.296
2.343
2.390
2.624
8
10
12
14
16
18
20
22
24
.796
.921
.655
.749
.169
.170
.264
.310
.330
.444
.510
.515
.656
.941
1.191
1.191
1.254
1.316
1.562
1.625
1.719
1.751
.339
.393
.450
.519
.583
.621
.683
.739
.797
1.986
2.080
2.165
2.313
2.515
2.623
2.739
2.785
3.024
.469
.547
.625
.734
.750
.781
.859
.906
1.169
.312
.438
.516
.625
.656
.703
.766
.812
.918
.438
.562
1.046
1.171
1.297
1.422
1.562
1.672
1.797
.812
.688
.905
.781
1.030
1.015
1.077
1.139
1.265
.890
1.000
1.125
1.234
1.374
All dimensions for reference only.
47
PT-CE Bre akaway
twist pull plug
6.000 ± .250
The PT-CE miniature breakaway connector has the
following design features:
L
J
+.010
.016
• crimp front release, front removable contacts in
“CE” nylon wafer retention system
–.025
SOCKET INSERT
+.010
–.025
PIN INSERT
.328
• 2 styles available: potted termination and environ-
ment style with a strain relief
• instant decoupling of plug and receptacle with an
axial pull on the lanyard when they are fully
mated
H
B
• intermateable with standard receptacles
• operating voltage to 900 VAC (RMS) at sea level
• quick positive bayonet coupling and 5 key/key-
way polarization
A
LANYARD PULLED TAUT
AGAINST A .200 ± .031 DIA. MANDREL
Breakaway PT-CE with Crimp Contacts,
Potted Termination
71-2512XX-(
72-2512XX-(
)
)
6.000 ± .250
L
1
J
+.010
–.025
SOCKET INSERT
.016
A
Dia.
Max.
F
Dia.
H
Dia.
Part
Number*
Part
Number*
Shell
Size
B
Max.
J
L
Max.
L1
Max.
.328
±.016 ±.016 ±.010
+.010
–.025
PIN
71-251209 71-339508
71-251210 71-339510
71-251211 71-339512
71-251212 71-339514
71-251213 71-339516
71-251214 71-339518
71-251215 71-339520
71-251216 71-339522
71-251217 71-339524
8
.875
.984
.125
.188
.312
.375
.500
.625
.327
.444
.558
.683
.808
.909
.353 1.937 2.937
.353 1.890 2.937
.353 1.906 3.000
.353 1.953 3.000
.353 2.000 3.187
.353 2.031 3.375
.415 2.234 3.375
.415 2.328 3.375
.415 2.359 3.625
10 1.125 1.125
12 1.281 1.406
14 1.438 1.562
16 1.562 1.688
18 1.718 1.844
20 1.875 2.000
22 2.031 2.188
24 2.156 2.312
INSERT
F
.625 1.034
.750 1.159
.800 1.284
Breakaway PT-CE with Crimp Contacts,
Environmental with Strain Relief
71-3395XX-(
72-3395XX-(
)
)
All dimensions for reference only.
* See Finish information below to determine prefix 71 or 72 in part number.
Drawing above shows standard lanyard length.
Order by Amphenol Propriety number as follows (example part number shown):
71 -
2512 50
-
32
P
1
2
3
4
5
1. Finish
“71” designates corrosion resistant olive drab cadmium plate
“72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hr.
extended salt spray.
2. Connector Type Identification
2512XX designates PT-CE plug, crimp, potted termination style
3395XX designates PT-CE plug, crimp, environmental with strain relief style
3. Shell Size
See part number columns in chart above for 2 digit number at end that correlates to the shell size. Example: ‘50’ correlates to shell size 18.
4. Insert Arrangement Number
See insert availability for Miniature Breakaway connectors on page 6. The number
following the hyphen is the insert arrangement number.
Pin Contacts
Amphenol Equates to Amphenol Equates to
Socket Contacts
5. Contact Type/Alternate Insert Rotation
Letter
G
I
K
M
MS letter
PW
PX
PY
PZ
Letter
H
J
L
N
MS letter
SW
SX
SY
SZ
P designates pin, S designates socket for normal positioning of inserts. When an
alternate position of the insert is required to prevent cross-mating a different letter
(other than P or S) is used. See page 7 for description of alternate positions; then
convert to Amphenol proprietary coding by the chart at right to complete the part
number.
48
PT-CE, SP-CE
how to order
PT-CE, SP-CE
To more easily illustrate ordering procedure, part number
PT00CE-20-41PW (SR) is shown as follows:
PT
1
00 CE – 20 – 41
P
6
W
7
(SR)
8
2
3
4
5
See code below:
1. Connector Type
“PT” designates standard electrically conductive olive drab cadmium plated
bayonet lock connector with crimp contacts
“SP” designates electrically non-conductive, hard anodic coated bayonet
lock connector with large flange and mounting holes for back panel mount-
ing, and crimp contacts.
2. Shell Style
“00”
“01”
“02”
“06”
“07”
“08”
designates wall mounting receptacle
designates cable connecting receptacle*
designates box mounting receptacle
designates straight plug
designates jam nut receptacle
designates 90° plug
3. Service Class
“CE” designates environmental crimp
“CP” designates potted type crimp
Both of the above are Amphenol® proprietary versions of the MIL-C-
26482, Series 1 crimp contact connector and offer 7 lbs. contact retention
for size 20 contacts; 9 lbs for size 16 contacts.
4. Shell Size
“20” designates shell size. Shell sizes 6 through 24 available.
5. Insert Arrangement
Refer to pages 4-11 for insert availability.
“20 – 41” designates insert arrangement. (The number following the
hyphen is the number only that is used in the part number).
6. Contacts
“P” designates pin contacts.
“S” designates socket contacts.
7. Insert Rotation
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “nor-
mal” position. No letter required for normal (no rotation) position.
8. “(SR)” designates strain relief clamp.
Indicate optional finishes as follows:
(003) olive drab cadmium plate (standard on “PT”)
(005) anodic coating - Alumilite® (standard on “SP”)
(014) olive drab cadmium plate over nickel
(023) electroless nickel
(024) olive drab zinc cobalt plating
(025) non-conductive black zinc cobalt plating
(027) conductive black zinc cobalt plating
(424) electroless nickel finish with strain relief
(466) olive drab zinc cobalt plating with strain relief
(470) non-conductive black zinc cobalt plating with strain relief
(476) conductive black zinc cobalt with strain relief
* This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
For ordering Miniature Breakaway PT-CE Crimp connectors see page 48.
49
®
Amphe nol PC
threaded coupling and solder termination
Amphenol® PC Series threaded coupling miniature cylin-
drical connectors incorporate solder contacts. The PC dou-
ble stub threaded coupling system cannot be cross
threaded, and is mechanically assisted while engaging and
disengaging.
Shell components are aluminum. Bright cadmium plating to
QQ-P-416 with a clear chromate after-treatment provides a
golden colored conductive finish. Single key/keyway polariza-
tion represents maximum simplicity in a design proven in mil-
lions of AN connectors.
wall mounting
receptacle
Both pins and sockets are machined from a copper alloy and
are gold plated. This gold plating eliminates contact corrosion
and offers an indefinite shelf life. Socket contacts for these
series are a closed entry design.
cable
connecting
receptacle*
Both the insert and main joint gasket are molded from resilient
neoprene. This provides excellent moisture sealing at the gas-
ket and superior electrical insulation of the contacts in the
insert.
The PC is intermateable and intermountable within the PC
threaded coupling series.
Refer to pages 4-11 for insert arrangement availability.
box mounting
receptacle
*
This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
PC-SE and PC-CE, which are threaded coupling and incorporate crimp
contacts, are briefly covered on pages 62 and 63. It is necessary to
contact Amphenol for ordering information on these types.
straight plug
jam nut
receptacle
50
PC
Contact Specifications
Maximum
Contact
Size
Test
Current
Millivolt
Drop†
Solder Well
Diameter
Solder
Well Depth
+.004
.046
+.031
.125
20
7.5
55
50
“A”
general duty
–.000
–.000
+.005
.078
+.031
.188
16
13.0
–.003
–.000
Service Rating
Recommended
Operating
Test Voltage AC (RMS), 60 cps
Service
Rating
AC Voltage
at Sea Level
Sea
Level
50,000 70,000 110,000
ft.
ft.
ft.
I
600
1,500
2,300
500
750
375
500
200
200
“E” (SR)
strain relief
II
1,000
† Silver plated wire per MIL-C-26482
PC Service Classes
PC connectors are available in the service classes
listed below. Each class except the hermetic seal
receptacle has one or more means of terminating or
supporting a cable or wire bundle.
“A”
General duty; back shell is threaded for con-
duit attachment of MS3057 cable clamp.
“E” MS / “E”
open wire seal
“A” (SR) General duty; with strain relief clamp for
cable or wire bundle support.
“C”
Pressurized receptacle; less than 1 cu. in.
per hour leakage at 30 psi over a tempera-
ture range of –65°F to +257°F in accor-
dance with BSC-C1P specification.
“E”
Environment resistant; with nut and grom-
met for moisture proofing individual wires.
“E” (SR) Environment resistant strain relief clamp and
grommet for moisture proofing individual
wires; provides added wire bundle support.
“P”, MS / “P”
potting boot
“P”
Translucent nylon boot for retaining cus-
tomer applied potting compounds; held in
place by a threaded ring.
“P” (SR) Strain relief clamp suitable for retaining cus-
tomer applied potting compounds, with pro-
vision for wire support.
“W”
cable seal
“W”
Compressing clamp and neoprene gland for
moisture proofing multi-conductor jacketed
cables. Telescoping sleeves (MS 3420A)
can be used to adapt to cables smaller than
minimum close down.
“H”*
Hermetically sealed with compression glass
inserts.
Refer to pages 57-60 for Hermetic Versions within the
PC solder series.
51
PC00
wall mounting receptacle
S
R
L
.120 .005 Dia.
4 Holes
A
M
Q
R S
K
Z
TERMINATION ASSEMBLIES
“E” Open Wire Seal
“A” General Duty/
“C” Pressurized
“A” (SR), “E” (SR), “P” (SR)
Strain Relief
“P” Potting Boot
“W” Cable Seal
L
L
L
L
L
V
N
D
G D H
N
D
N
D
N
N
C
.375 MIN
PC00A-XX-XXX
PC00C-XX-XXX
PC00A-XX-XXX (SR)
PC00E-XX-XXX (SR)
PC00E-XX-XXX
PC00P-XX-XXX
PC00W-XX-XXX
To complete part number see how to order on page 61.
Receptacle Side View
Receptacle
Front View
Class “A”, “C”
A
M
Q
V
Shell
R
S
Thread
Class 2A
K
L
+.000
–.010
Thread
Class 2A
Z
Max.
D
Min.
L
Max.
N
Max.
Thread
Class 2A
Size ±.005 ±.010
Max. Max.
6
8
.469
.594
.719
.688
.812
.938
.3750 DS
.5000 DS
.6250 DS
.7500 DS
.8750 DS
.490
.490
.490
.490
.490
.490
.490
.875
.875
.875
.875
.875
.875
.875
.416
.416
.416
.416
.416
.416
.416
.479
.479
.3125-32 NEF
.466
.175
.297
.421
.546
.663
.787
.879
1.014
1.135
1.528
.462
.590
.717
.834
.970
.3750-32 NEF
.5000-28 UNEF
.6250-24 NEF
.7500-20 UNEF
.8750-20 UNEF
.4375-28 UNEF .466
1.528
10
12
14
16
.5625-24 NEF
.6875-24 NEF
.466
.466
1.528
.812 1.031
.906 1.125
1.528
.8125-20 UNEF .466
.9375-20 UNEF .466
1.0625-18 UNEF .466
1.528
.969 1.219 1.0000 DS
1.528 1.088
1.528 1.216
1.588 1.332
1.588 1.460
1.0000-20 UNEF
1.1875-18 NEF
1.1875-18 NEF
1.4375-18 NEF
18 1.062 1.312 1.1250 DS
20 1.156 1.438 1.2500 DS
22 1.250 1.562 1.3750 DS
.584 1.031
.584 1.031
1.1875-18 NEF
1.3125-18 NEF
.527
.527
Class “A” (SR), “E” (SR), “P” (SR)
Class “E”
Class “P”
Class “W”
D
Shell
C
D
G
H
L
N
L
N
D
L
N
L
N
Size Thread Min.
Dia.
Max.
Max.
Max.
Max.
Max.
Min.
Max.
Max.
Closed
–
Free
Max.
Max.
6
8
–
–
–
–
–
–
1.250
.440
.560
.685
.813
.930
.192
.317
.434
.548
.673
.798
.899
1.406
1.406
1.406
1.406
1.406
.484
.608
.734
.858
.984
–
–
–
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
.240
.302
.428
.552
.615
.740
.740
.928
.125
.188
.312
.375
.500
.625
.625
.750
.812 1.922
.875 1.922
1.000 1.922
1.125 1.922
.550 1.250
.675 1.250
.803 1.250
.920 1.250
.168
.205
.338
.416
.550
.600
.635
.670
.230
.312
.442
.539
.616
.672
.747
.846
1.680
1.680
1.823
2.015
.547
.675
.812
.940
10
12
14
16
18
20
22
1.188 2.047 1.047 1.250 1.057
1.438 2.078 1.165 1.250 1.175
1.406 1.110
1.406 1.234
1.562 1.360
1.562 1.484
2.231 1.067
2.461 1.194
2.835 1.322
2.999 1.449
1.438 2.344 1.290 1.434 1.301 1.024
1.719 2.344 1.418 1.434 1.430 1.149
All dimensions for reference only.
52
PC01
cable connecting receptacle
L
S
A
Q
Z
TERMINATION ASSEMBLIES
“A” General Duty
“A” (SR), “E” (SR), “P” (SR)
Strain Relief
“E” Open Wire Seal
“P” Potting Boot
“W” Cable Seal
L
L
L
L
L
V
N
D
G D H
N
D
N
D
N
N
C
.375 MIN
PC01A-XX-XXX
PC01A-XX-XXX (SR)
PC01E-XX-XXX (SR)
PC01P-XX-XXX (SR)
PC01E-XX-XXX
PC01P-XX-XXX
PC01W-XX-XXX
Note: This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 61.
Recept.
Front View
Receptacle
Side View
Class “E”
A
Q
V
Shell
Size
S
Max.
Thread
Class 2A
L
Max.
Thread
Class 2A
Z
Max.
D
L
N
Max.
Thread
Class 2A
Min.
.175
.297
.421
.546
.663
.787
.879
1.014
1.135
Max.
1.518
1.518
1.518
1.518
1.518
1.518
1.518
1.578
1.578
6
8
.442
.570
.3750 DS
.5000 DS
.6250 DS
.7500 DS
.8750 DS
1.0000 DS
1.1250 DS
1.2500 DS
1.3750 DS
.875
.875
.875
.875
.875
.875
.875
1.031
1.031
.3125-32 NEF
.4375-28 UNEF
.5625-24 NEF
.6875-24 NEF
.8125-20 UNEF
.9375-20 UNEF
1.0625-18 NEF
1.1875-18 NEF
1.3125-18 NEF
.924
.924
.924
.924
.924
.924
.924
1.081
1.081
.462
.590
.3750-32 NEF
.5000-28 UNEF
.6250-24 NEF
10
12
14
16
18
20
22
.697
.717
.814
.834
.7500-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.1875-18 NEF
1.1875-18 NEF
1.4375-18 NEF
.950
.970
1.068
1.196
1.312
1.440
1.088
1.216
1.332
1.460
Class “A” (SR), “E” (SR), “P” (SR)
Class “E”
Class “P”
Class “W”
L
D
Shell
C
D
G
H
L
N
L
N
D
L
N
N
Size Thread Min.
Dia.
Max.
Max.
Max.
Max.
Max.
.440
.560
.685
.813
.930
Min.
Max.
Max. Closed Free
Max.
Max.
6
8
–
–
–
–
–
–
1.250
1.250
1.250
1.250
1.250
.192 1.406
.317 1.406
.434 1.406
.548 1.406
.673 1.406
.484
.608
.734
.858
.984
–
–
–
–
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
.240
.302
.428
.552
.615
.740
.740
.928
.125
.188
.812
.875
1.922
1.922
1.922
1.922
2.047
2.078
2.344
2.344
.550
.168
.205
.338
.416
.550
.600
.635
.670
.230
.312
.442
.539
.616
.672
.747
.846
1.680
1.680
1.823
2.015
2.231
2.461
2.835
2.999
.547
.675
.812
.940
1.067
1.194
1.322
1.449
10
12
14
16
18
20
22
.675
.312 1.000
.375 1.125
.500 1.188
.625 1.438
.625 1.438
.750 1.719
.803
.920
1.047
1.165
1.290
1.418
1.250 1.057
1.250 1.175
.798 1.406 1.110
.899 1.406 1.234
1.434 1.301 1.024 1.562 1.360
1.434 1.430 1.149 1.562 1.484
All dimensions for reference only.
53
PC02
box mounting receptacle
L
S
R
.120 .005 Dia.
4 Holes
A
M
R S
N
K
Z
PC02A-XX-XXX
* PC02C-XX-XXX
* PC02E-XX-XXX
* PC02P-XX-XXX
To complete part number see how to order on page 61.
* The PC02 Box Mounting Receptacle is made only to complete a series and no provision
is made for accessories or potting on the rear skirt.
Receptacle
Front View
Receptacle
Side View
A
K
M
Shell
Size
R
±.005
S
±.010
Thread
Class 2A
+.020
–.010
L
Max.
+.010
–.000
N
Max.
Z
Max.
6
8
.469
.688
.812
.3750 DS
.5000 DS
.6250 DS
.7500 DS
.8750 DS
1.0000 DS
1.1250 DS
1.2500 DS
1.3750 DS
.469
.469
.469
.469
.469
.469
.469
.562
.562
.801
.801
.801
.801
.801
.801
.801
.988
.988
.406
.406
.406
.406
.406
.406
.406
.469
.469
.323
.466
.466
.466
.466
.466
.466
.466
.527
.527
.594
.449
10
12
14
16
18
20
22
.719
.938
.573
.812
1.031
1.125
1.219
1.312
1.438
1.562
.699
.906
.823
.969
.949
1.062
1.156
1.250
1.073
1.199
1.323
All dimensions for reference only.
54
PC06
straight plug
.333 MAX
A
Z
S
Q
L
TERMINATION ASSEMBLIES
“A” General Duty
“A” (SR), “E” (SR), “P” (SR) Strain Relief
“E” Open Wire Seal
“P” Potting Boot
“W” Cable Seal
L
L
L
L
L
V
N
D
G D H
N
D
N
D
N
N
C
.375 MIN
PC06A-XX-XXX
PC06A-XX-XXX (SR)
PC06E-XX-XXX (SR)
PC06P-XX-XXX (SR)
PC06E-XX-XXX
PC06P-XX-XXX
PC06W-XX-XXX
To complete part number see how to order on page 61.
Plug Front
View
Plug
Side View
Class “A”
A
Q
V
Shell
Size
S
Max.
Thread
Class 2B
L
Max.
Thread
Class 2A
Z
Max.
D
L
Max.
N
Max.
Thread
Class 2A
Min.
.175
.297
.421
.546
.663
.787
.879
1.014
1.135
6
8
.604
.729
.3750 DS
.5000 DS
.6250 DS
.7500 DS
.8750 DS
1.0000 DS
1.1250 DS
1.2500 DS
1.3750 DS
.875
.875
.875
.875
.875
.875
.875
1.031
1.031
.3125-32 NEF
.4375-28 UNEF
.5625-24 NEF
.6875-24 NEF
.8125-20 UNEF
.9375-20 UNEF
1.0625-18 UNEF
1.1875-18 NEF
1.3125-18 NEF
.627
.627
.627
.627
.627
.627
.627
.783
.783
1.534
1.534
1.534
1.534
1.534
1.534
1.534
1.613
1.613
.462
.590
.3750-32 NEF
.5000-28 UNEF
.6250-24 NEF
.7500-20 UNEF
.8750-20 UNEF
10
12
14
16
18
20
22
.854
.717
.979
.834
1.104
1.229
1.354
1.478
1.604
.972
1.088
1.216
1.332
1.460
1.0000-20 UNEF
1.1875-18 NEF
1.1875-18 NEF
1.4375-18 NEF
Class “A” (SR), “E” (SR), “P” (SR)
Class “E”
Class “P”
Class “W”
D
Shell
C
D
G
H
L
N
L
N
D
L
N
L
N
Size Thread Min.
Dia.
Max.
Max.
Max.
Max.
Max.
Min.
Max.
Max.
Closed Free
Max.
Max.
6
8
–
–
–
–
–
–
1.250
1.250
1.250
1.250
1.250
.440
.560
.685
.813
.930
.192 1.406
.317 1.406
.434 1.406
.548 1.406
.673 1.406
.484
.608
.734
.858
.984
–
–
–
–
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
.240 .125
.302 .188
.812 1.906
.875 1.906
.550
.675
.803
.920
.168
.205
.338
.416
.550
.600
.635
.670
.230
.312
.442
.539
.616
.672
.747
.846
1.680
1.680
1.823
2.015
.547
.675
.812
.940
10
12
14
16
18
20
22
.428 .312 1.000 1.906
.552 .375 1.125 1.906
.615 .500 1.188 2.047 1.047
.740 .625 1.438 2.078 1.165
.740 .625 1.438 2.250 1.290
.928 .750 1.719 2.250 1.418
1.250 1.057
1.250 1.175
.798 1.406 1.110
.899 1.406 1.234
2.231 1.067
2.461 1.194
2.835 1.322
2.999 1.449
1.434 1.301 1.024 1.562 1.360
1.434 1.430 1.149 1.562 1.484
All dimensions for reference only
55
PC07
jam nut receptacle
S
H
F
M
P
Z
F
General Duty/
Pressurized Receptacle
7A-XX-XXX
S
7C-XX-XXX
A
R
K
TERMINATION ASSEMBLIES
“A” (SR), “E” (SR) Strain Relief
“E” Open Wire Seal
“P” Potting Boot
M
Z
M
Z
M
Z
D
N
N
G D H
A
R
A
R
A
R
P
L
P
L
P
L
PC07P-XX-XXX
PC07E-XX-XXX
PC07A-XX-XXX (SR)
PC07E-XX-XXX (SR)
To complete part number see how to order on page 61.
Receptacle Side View
Class “A”, “C”
Receptacle Front View
P
H
Hex
±.016
A
K
+.016
–.010
R
Panel Thickness
Shell
Size
F
S
±.010
Thread
M
±.010
Thread
Class 2A
Z
±.010
Class 2A
.3750 DS
.5000 DS
.6250 DS
.7500 DS
.8750 DS
1.0000 DS
1.1250 DS
1.2500 DS
1.3750 DS
Min.
.062
.062
.062
.062
.062
.062
.062
.062
.062
Max.
.125
.125
.125
.125
.125
.125
.125
.250
.250
Max.
.232
.232
.232
.232
.232
.232
.232
.262
.262
6
8
.286
.331
.375
.442
.486
.530
.573
.641
.685
.625
.750
.812
.938
.125
.125
.125
.125
.125
.125
.125
.156
.156
.671
.671
.671
.671
.671
.671
.671
.797
.797
.4375-28 UNEF
.5625-24 NEF
.6875-24 NEF
.8750-20 UNEF
1.0000-20 UNEF
1.1250-18 NEF
1.2500-18 NEF
1.3750-18 NEF
1.5000-18 NEF
10
12
14
16
18
20
22
.875
1.062
1.250
1.375
1.500
1.625
1.812
1.938
1.062
1.188
1.312
1.438
1.562
1.688
Class “E”
Class “A” (SR), “E” (SR)
Class “P”
Shell
Size
L
Max.
N
Max.
C
G
Dia.
H
Max.
L
Max.
P
Min.
D
L
Max.
N
Max.
Thread
Min.
.192
.317
.434
.548
.673
.798
.899
1.024
1.149
6
8
.692
.692
.692
.692
.692
.692
.692
.754
.754
.605
.730
–
–
–
–
–
.665
.665
.665
.665
.665
.665
.665
.790
.790
.484
.608
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
.125
.188
.312
.375
.500
.625
.625
.750
.812
1.096
1.096
1.096
1.096
1.228
1.228
1.291
1.291
.240
.302
.428
.552
.651
.740
.740
.928
10
12
14
16
18
20
22
.855
.875
.734
.980
1.000
1.125
1.188
1.438
1.438
1.625
.858
1.105
1.230
1.355
1.511
1.636
.984
1.110
1.234
1.360
1.484
All dimensions for reference only
56
PC
hermetic
Three shell styles are available in the hermetic PC threaded
series:
•
•
•
PCIH
PC02H
PC07H
These hermetic connectors are available with solder cup or flat
eyelet pin contacts. Socket contacts are available in some ver-
sions. Other design characteristics of the PC hermetic connec-
tor series are as follows:
solder
mounting
receptacle
Shell Size: 6 thru 22. (tin plated)
Contact count: 2 through 65. Refer to pages 4 and 5 for insert
availability for hermetics.
Current: 5.0 amp, each #20 contact;
10 amp, each #16 contact;
17 amp, each #12 contact.
Contacts: Fabricated from high nickel alloy and tin plated.
Dielectric Withstanding Voltage (sea level):
1500 volts (RMS) 60 cps Service Rating I;
2300 volts (RMS) 60 cps Service Rating II.
Compression glass inserts, permanently lettered.
Helium Leakage: Less than 1.0 X 10-6 cc/sec.
at 15 psi differential.
box
mounting
receptacle
Physical Shock: 100 G’s.
Vibration: Exceeds MIL-E-5272 Procedure II.
Thermal Shock: No deterioration or failure after
5 cycles at –55°F to +257°F.
Refer to pages 4-11 for insert arrangement availability.
jam nut
receptacle
57
PC
IH
hermetic solder mounting receptacle
L
S
A
W
N
Z
.031 +.006
–.005
* PCIH-XX-XXX
** PCIY-XX-XXX
To complete part number see how to order on page 61.
* Solder cup pin contacts without interfacial seal.
** Solder cup pin contacts with interfacial seal
Receptacle
Front View
Receptacle
Side View
N
S
A
L
Dia.
W
Shell
Size
Dia.
Max.
Thread
Class 2A
+.025
–.016
+.000
–.005
+.011
–.010
Z
Max.
6
8
.511
.636
.3750 DS
.5000 DS
.6250 DS
.7500 DS
.8750 DS
1.0000 DS
1.1250 DS
1.2500 DS
1.3750 DS
.422
.422
.422
.422
.422
.422
.422
.422
.422
.438
.562
.094
.094
.094
.094
.094
.094
.094
.094
.125
.387
.387
.387
.387
.387
.387
.387
.387
.418
10
12
14
16
18
20
22
.761
.672
.855
.781
.980
.906
1.105
1.229
1.323
1.439
1.031
1.156
1.250
1.375
All dimensions for reference only.
58
PC02H
hermetic box mounting receptacle
L
A
S
R
.120 .005 Dia.
4 Holes
K
N
R S
Z
T
* PC02H-XX-XXX
** PC02Y-XX-XXX
To complete part number see how to order on page 61.
* Solder cup pin contacts without interfacial seal.
** Solder cup pin contacts with interfacial seal
Receptacle Front
View
Receptacle Side View
N
A
L
Dia.
+.000
–.005
Shell
Size
R
±.005
S
±.010
Thread
Class 2A
K
±.016
+.010
–.000
T
Z
Max.
±.010
.062
.062
.062
.062
.062
.062
.062
.062
.062
6
8
.469
.594
.688
.812
.3750 DS
.5000 DS
.6250 DS
.7500 DS
.8750 DS
1.0000 DS
1.1250 DS
1.2500 DS
1.3750 DS
.047
.047
.047
.047
.047
.047
.047
.047
.078
.469
.469
.469
.469
.469
.469
.469
.469
.469
.438
.562
.344
.344
.344
.344
.344
.344
.344
.344
.377
10
12
14
16
18
20
22
.719
.938
.672
.812
1.031
1.125
1.219
1.312
1.438
1.562
.781
.906
.906
.969
1.031
1.156
1.250
1.375
1.062
1.156
1.250
All dimensions for reference only.
59
PC07H
hermetic jam nut receptacle
M
S
F
Z
P
F
S
A
R
K
H
* PC07H-XX-XXX
** PC07Y-XX-XXX
To complete part number see how to order on page 61.
* Solder cup pin contacts without interfacial seal.
** Solder cup pin contacts with interfacial seal
Receptacle Front View
H
Receptacle Side View
Panel
Thickness
A
K
+.000
–.016
R
Shell
Size
F
Hex.
S
Thread
Class 2A
M
±.020
Thread
Class 2A
Z
+.010
±.016
+.010
Min
.062
.062
.062
.062
.062
.062
.062
.062
.062
Max.
.125
.125
.125
.125
.125
.125
.125
.250
.250
+.010
6
8
.286
.331
.375
.442
.486
.530
.573
.641
.685
.625
.750
.812
.938
.3750 DS
.5000 DS
.6250 DS
.7500 DS
.8750 DS
1.0000 DS
1.1250 DS
1.2500 DS
1.3750 DS
.094
.094
.094
.094
.094
.094
.094
.125
.125
.671
.671
.671
.671
.671
.671
.671
.797
.797
.4375-28 UNEF
.5625-24 NEF
.6875-24 NEF
.8750-20 UNEF
1.0000-20 UNEF
1.1250-18 NEF
1.2500-18 NEF
1.3750-18 NEF
1.5000-18 NEF
.129
.129
.129
.129
.129
.129
.129
.034
.034
10
12
14
16
18
20
22
.875
1.062
1.250
1.375
1.500
1.625
1.812
1.938
1.062
1.188
1.312
1.438
1.562
1.688
All dimensions for reference only.
60
PC
how to order
PC
To more easily illustrate ordering procedure, part number
PC00A-20-41PW (SR) is shown as follows:
PC
1
00
2
A
3
– 20 – 41
P
6
W
7
(SR)
8
4
5
See code below:
1. Connector Type
“PC” designates bright cadmium plated with clear chromate after treat-
ment, threaded coupling connector with solder contacts
2. Shell Style
“00”
“01”
“02”
“06”
“07”
“I”
designates wall mounting receptacle
designates cable connecting receptacle†
designates box mounting receptacle
designates straight plug
designates jam nut receptacle
designates solder-mount receptacle (hermetic only)
3. Service Class
“A”
“C”
“E”
designates general duty back shell
designates pressurized receptacle
designates environmental resisting open wire seal with
grommet and nut
“P”
designates potted with potting boot
“W”
designates clamp assembly for moisture proofing, multi-
jacketed cables
“H”
“Y”
designates hermetic* seal (without interfacial seal)
designates hermetic* seal (with interfacial seal)
4. Shell Size
“20”
designates shell size. Shell sizes 6 through 24 available.
5. Insert Arrangement
Refer to pages 4-11 for insert availability.
“20 – 41” designates insert arrangement. (The number following the
hyphen is the number only that is used in the part number).
6. Contacts
“P”
“S”
designates pin contacts.
designates socket contacts.
7. Insert Rotation
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “nor-
mal” position. No letter required for normal (no rotation) position.
8. “(SR)” designates strain relief clamp.
Indicate optional finishes as follows:
(001) bright cadmium (standard on “PC”)
(003) olive drab cadmium plate
(005) anodic coating - Alumilite®
(011) chromate treated (Iridite 14-2)
(014) olive drab cadmium plate over nickel
(023) electroless nickel
*
Hermetic connectors are supplied with tin plated shells.
†
This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
61
®
Amphe nol PC-SE, PC-CE
threaded coupling and crimp termination
PC-SE. PC-CE
Contact Specifications
Maximum
Millivolt
Drop†
Contact
Size
Test
Current
Crimp Well
Diameter
Minimum
Well Depth
20
16
12
7.5
13.0
23.0
55
49
42
.049 ±.001
.067 ±.001
.100 ±.002
.267
.236
.236
Service Rating
Amphenol® PC-SE Series threaded coupling miniature cylindri-
cal connectors incorporate crimp contacts in a spring tower
retention system.
Amphenol® PC-CE Series threaded coupling miniature cylindri-
cal connectors incorporate crimp contacts in a nylon wafer
retention system to maintain contact position.
Recommended
Operating
Test Voltage AC (RMS), 60 cps
Service
Rating
AC Voltage
at Sea Level
Sea
50,000 70,000 110,000
Level
ft.
ft.
ft.
I
600
1,500
2,300
500
750
375
500
200
200
II
1,000
The PC double stub threaded coupling system cannot be cross
threaded, and is mechanically assisted while engaging and dis-
engaging.
† Silver plated wire per MIL-C-26482
PC-SE and PC-CE Service Classes
Shell components are aluminum. Bright cadmium plating to QQ-P-
416 with a clear chromate after-treatment provides a golden colored
conductive finish. Single key/keyway polarization represents maxi-
mum simplicity in a design proven in millions of AN connectors.
PC-SE and PC-CE connectors are available in the
three service classes listed below.
“SE”
Open wire sealing - environmental resistant,
with a nut and grommet for moisture proof-
ing individual wires
Both pins and sockets are machined from a copper alloy and are gold
plated. This gold plating eliminates contact corrosion and offers an
indefinite shelf life. Socket contacts for these series are a closed entry
design.
“SE” (SR)Strain relief clamp - environmental resistant
strain relief clamp and grommet for moisture
proofing individual wires; provides added
wire bundle support
Both the insert and main joint gasket are molded from resilient neo-
prene. This provides excellent moisture sealing at the gasket and
superior electrical insulation of the contacts in the insert.
“SP”
Translucent nylon boot for retaining cus-
tomer applied potting compounds; held in
place by a threaded ring
The PC-SE and PC-CE are only intermateable and intermountable
within the PC threaded coupling series.
Shell style drawing pages are not shown in this catalog for the PC-SE
and PC-CE styles. If connector drawings are needed please contact
Amphenol for assistance. Shell styles are currently available in these
series as follows:
“SE”
open wire seal
• PC00-SE, wall mounting receptacle
• PC01-SE, cable connecting receptacle
• PC02-SE, box mounting receptacle
• PC06-SE, straight plug
• PC08-SE, 90 degree plug
• PC06-CE straight plug (will mate with PC-SE receptacles and PC
solder receptacles)
“SE” (SR)
strain relief
Please contact Amphenol for complete information, as there may be
limitations in shell sizes within the PC-SE and PC-CE series.
Refer to pages 4-11 for insert arrangement availability.
* This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
“SP”
potting boot
62
PC-SE, PC-CE
how to order
PC-SE, PC-CE
To more easily illustrate ordering procedure, part number
PC-SE00A-20-41PW (SR) is shown as follows:
PC-SE 00 SP
–
20 – 41
P
6
W
7
(SR)
8
1
2
3
4
5
See code below:
1. Connector Type
“PC-SE” designates bright cadmium plated with clear chromate after
treatment, threaded coupling connector with crimp contacts, incorporat-
ing a spring tower retention system
“PC-CE” designates bright cadmium plated with clear chromate after
treatment, threaded coupkling connector with crimp contacts, incorpo-
rating a nylon waftr retention system to maintain contact postion
2. Shell Styles PC-SE - consult Amphenol for availability.
“00”
“01”
“02”
“06”
“08”
designates wall mounting receptacle
designates cable connecting receptacle†
designates box mounting receptacle
designates straight plug
designates 90 degree plug
2. Shell Style PC-CE - consult Amphenol for availability.
“06” designates straight plug
3. Service Class
“SE” designates environmental crimp
“SP” designates potted type crimp
Both of the above are Amphenol® proprietary versions of the MIL-C-
26482, Series 1 crimp contact connector and offer 7 lbs. contact reten-
tion for size 20 contacts; 9 lbs for size 16 contacts.)
4. Shell Size
“20”
designates shell size. Please contact Amphenol for complete
information, as there may be limitations in shell sizes with the PC-SE
and PC-CE series.
5. Insert Arrangement
Refer to pages 4-11 for insert availability.
“20 – 41” designates insert arrangement. (The number following the
hyphen is the number only that is used in the part number).
6. Contacts
“P”
“S”
designates pin contacts.
designates socket contacts.
7. Insert Rotation
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “nor-
mal” position. No letter required for normal (no rotation) position.
8. “(SR)” designates strain relief clamp.
Indicate optional finishes as follows:
(001) bright cadmium (standard on “PC”)
(003) olive drab cadmium plate
(005) anodic coating - Alumilite®
(011) chromate treated (Iridite 14-2)
(014) olive drab cadmium plate over nickel
(023) electroless nickel
†
This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
63
PT, SP, PC
accessories – sealing plugs, flange gaskets,
potting boots
SEALING PLUGS – FOR PT, SP, PC
Amphenol®
Part
Number
10-405996-12 MS27488-12
10-405996-16 MS27488-16
10-405996-20 MS27488-20
A
Dia.
±.010
.121
.083
.060
B
Dia.
±.005
.171
.133
.090
C
B
DIA
Contact
Size
12
16
20
MS
Number
C
±.010
.564
.564
.564
Color
Code
Yellow
Blue
.135 +.030
–.025
Red
A
DIA
How to Order: Order by 10- (Proprietary) or MS part number as shown in chart above.
SEALING PLUG
MS27488-XX
10-405996-XX
MOUNTING FLANGE GASKETS – FOR PT, SP, PC
.130 DIA SIZE 6 TO 22
.156 DIA SIZE 24
.160 DIA 10-150949
PT, SP, PC
10-101949
10-150949
S
F
PT, PC
10-101949
SP
10-150949
F
Shell
Size
6
8
10
12
14
16
18
20
22
24
R
±.010
.469
.594
.719
.813
.906
.969
1.063
1.156
1.250
1.375
S
±.010
.688
.812
.938
1.031
1.125
1.219
1.312
1.438
1.563
1.688
R
±.010
.641
.734
.812
.938
1.031
1.125
1.203
1.297
1.375
1.500
S
±.010
+.016
–.000
.375
.500
.625
.750
T
±.008
R
S
.953
1.047
1.125
1.250
1.344
1.438
1.516
1.672
1.750
1.875
.024
.024
.024
.024
.024
.024
.024
.024
.024
.024
T
R
.875
1.000
1.125
1.250
1.375
1.500
MOUNTING FLANGE GASKET
10-101949-XX
10-150949-XX
How to Order: For PT, PC: 10-101949-XX (complete order number with desired shell size).
For SP: 10-150949-XX (complete order number with desired shell size).
75° POTTING BOOTS – FOR PT, SP, PC
B
E
Shell
Size
B
Max.
D
±.015
E
±.015
.438
.562
.688
.781
.890
1.000
1.125
1.234
1.374
L
Max.
.766
.830
.861
.916
.936
.959
15º
REF
8
10
12
14
16
18
20
22
24
.433
.493
.552
.643
.658
.689
.750
.794
1.070
.312
.438
.516
.625
.656
.703
.766
.812
.918
D
L
1.052
1.073
1.310
75° POTTING BOOT
10-101988-XX
How to Order: 10-101988-XX (complete order number with desired shell size).
All dimensions for reference only.
64
PT, SP, PC
accessories – clamps
CLASS “E” STRAIN RELIEF CLAMP – FOR PT, SP, PC
Shell
Size
B
Max.
C Thread
Class 2B
D
Min.
G
Max.
L
Max.
L
8
10
12
14
16
18
20
22
24
.550
.675
.803
6-32 NC
6-32 NC
6-32 NC
6-32 NC
6-32 NC
8-32 NC
8-32 NC
8-32 NC
8-32 NC
.240
.302
.428
.552
.615
.740
.740
.928
.928
.812
.875
.930
.930
.930
1.000
1.125
1.188
1.438
1.438
1.719
1.719
B
D G
.920
.930
1.047
1.165
1.291
1.418
1.533
1.062
1.062
1.093
1.093
1.093
C
CLASS “E” STRAIN RELIEF CLAMP
10-101971-XX
How to Order: 10-101971-XX X
Add desired
Add desired finish suffix†
shell size
“1” designates bright cadmium with clear chromate
“3” designates olive drab cadmium
“5” designates Alumilite®
Not for use with jam nut style connectors.
CLASSES “A” & “P” STRAIN RELIEF CLAMP – FOR PT, SP, PC
C
L
L
Shell
Size
B
Max.
Thread
Class 2B
D
Min.
G
Max.
+.010
–.020
8
10
12
14
16
18
20
22
24
.540
.665
.793
6-32 NC
6-32 NC
6-32 NC
6-32 NC
6-32 NC
8-32 NC
8-32 NC
8-32 NC
8-32 NC
.240
.302
.428
.552
.614
.740
.740
.928
.938
.812
.875
.843
.843
.843
.843
.975
B
D G
1.000
1.125
1.188
1.438
1.438
1.719
1.719
.910
1.037
1.155
1.281
1.408
1.533
.975
C
1.007
1.007
1.007
CLASSES “A” & “P” STRAIN
RELIEF CLAMP
10-101980-XX
How to Order: 10-101980-XX X
Add desired
Add desired finish suffix†
shell size
“1” designates bright cadmium with
clear chromate
“3” designates olive drab cadmium
“5” designates Alumilite®
Not for use with jam nut style connectors.
CLASS “A” CABLE CLAMPS – FOR PT, SP, PC
V Thread
Shell
Size
Amphenol®
Part Number
A
±.031
B
Max.
C
V
Dia. Min.
Thread
10
12
14
16
18/20
22/24
97-3057-1004
97-3057-1007
97-3057-1008
97-3057-1010
97-3057-1012
97-3057-1016
.795
.850
.920
.920
.927
1.015
.842
.995
1.120
1.216
1.403
1.683
.3125
.4375
.5625
.6250
.7500
.9375
.6250-24
.7500-20
.8750-20
1.0000-20
1.1875-18
1.4375-18
B
How to Order: Order by 97-3057-XXXX number listed above. Standard finish is olive
drab zinc alloy. Consult Amphenol, Sidney, NY for alternate finishes.
C
A
CLASS “A” CABLE CLAMP
97-3057-XXXX
†
Standard accessory finishes are “1” bright cadmium with clear chromate for PC
types, “3” olive drab cadmium for PT and MS/PT types, “5” Alumilite® for SP types.
Electroless nickel plating is also available on some items; consult Amphenol, Sid-
ney, NY
All dimensions for reference only.
65
PT, SP, MS/PT
accessories – protection caps
RECEPTACLE PROTECTION CAPS – FOR PT, SP, MS/PT
C
B
B Dia.
+.010
–.000
C Dia.
+.010
–.000
G
Dia.
Max.
L
X
X
Shell
Size
+.020
–.000
Std. & MS
RA, CA, NA RAL/CAL/NAL
MS only
L
6
8
.328
.454
.578
.703
.844
.454
.578
.703
.577
.706
.816
1.000
1.128
1.257
1.367
1.496
1.624
1.747
.563
.563
.563
.563
.563
.563
.563
.563
.563
.603
3.000
3.000
3.000
3.500
3.500
3.500
3.500
4.000
4.000
4.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
10
12
14
16
18
20
22
24
+.010
–.005
G
.140
DIA
.891
1.016
1.141
1.266
1.391
1.516
1.614
.969
X
X
X
1.094
1.219
1.343
1.453
RECEPTACLE PROTECTION CAP
FOR PT, SP, MS/PT CONNECTORS
How to Order Proprietary Receptacle Caps:
Wall Receptacle Caps:
10-101960- XX X
10-101960-XXX
MS3181-XXX
(Wall Receptacle)
10-101961-XXX
(Cable Connecting
Receptacle)
10-101964-XXX
MS3181-XXX
(Jam Nut Receptacle)
Cable Connecting Receptacle Caps: 10-101961- XX X
Jam Nut Receptacle Caps:
10-101964- XX X
Add desired shell size
Add desired finish suffix†
“1” designates bright cadmium with clear chromate
“3” designates olive drab cadmium
“5” designates Alumilite®
Proprietary caps are supplied with standard bead chains only (as shown in draw-
ing at left). For other chain options, an MS version cap should be ordered.
How to Order MS Version Receptacle Caps:
Wall Receptacle Caps:
MS3181- XX -CA for sash chain
-CAL for long sash chain
-RA for rope chain
-RAL for long rope chain
MS3181- XX -NA for sash chain
-NAL for long sash chain
Jam Nut Recept. Caps:
Shell size
MS versions are supplied with standard anodize finish only. For other finish
options a proprietary cap should be ordered.
PLUG PROTECTION CAPS – FOR PT, SP, MS/PT
N Dia.
+.001
–.005
.348
.473
.590
.750
L Dia.
+.025
–.015
X
X
.140 +.010
Shell
Size
6
8
10
12
14
16
18
20
22
24
Std. & MS
CA, RA
MS only
CAL/RAL
–.005
L
DIA
FOR SIZE 24
.532
.532
.532
.532
.532
.532
.532
.594
.594
.627
3.000
3.000
3.000
3.500
3.500
3.500
3.500
4.000
4.000
4.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
.125 +.010
–.005
DIA
N
FOR SIZE 6-22
.875
1.000
1.125
1.250
1.375
1.500
X
PLUG PROTECTION CAP
FOR PT, SP, MS/PT CONNECTORS
MS3180-XXX
10-101957-XXX
How to Order Proprietary Plug Caps: 10-101957-XX X
Add desired shell size
Add desired finish suffix†
“1” designates bright cadmium with clear chromate
“3” designates olive drab cadmium
“5” designates Alumilite®
Proprietary caps are supplied with standard bead chains only (as shown in draw-
ing at left). For other chain options an MS version cap should be ordered.
†
Standard accessory finishes are “1” bright cadmium with clear chro-
mate for PC types, “3” olive drab cadmium for PT and MS/PT types,
“5” Alumilite® for SP types. Electroless nickel plating is also available
on some items; consult Amphenol, Sidney, NY
How to Order MS Version Plug Caps: MS3180- XX -CA for sash chain
-CAL for long sash chain
All dimensions for reference only.
Shell size
-RA for rope chain
-RAL for long rope chain
MS versions are supplied with standard anodize finish only.
For other finish options a proprietary cap should be ordered.
66
PC
accessories – protection caps
RECEPTACLE PROTECTION CAPS – FOR PC
C
B Dia.
+.010
–.000
C Dia.
+.010
–.000
B
Shell
Size
A Thread
Class 2B
G
L
X
Max.
.520
.648
.776
.902
1.030
1.157
1.284
1.412
1.507
Max.
±.250
L
A
6
8
10
12
14
.3750 DS
.5000 DS
.6250 DS
.7500 DS
.8750 DS
.328
.454
.578
.703
.844
.454
.578
.703
.448
.448
.448
.448
.448
.448
.448
.448
.448
3.000
3.000
3.000
3.500
3.500
3.500
3.500
4.000
4.000
+.010
–.005
G
.891
.125
DIA
1.016
1.141
1.266
1.391
1.516
16 1.0000 DS
18 1.1250 DS
20 1.2500 DS
22 1.3750 DS
.969
X
X
X
1.094
1.219
1.343
RECEPTACLE PROTECTION CAP
FOR PC CONNECTORS
How to Order Proprietary Receptacle Caps for PC connectors only:
Wall Receptacle Caps: 10-101950- XX X
Cable Connecting Receptacle Caps: 10-101951- XX X
10-101950-XXX
(Wall Receptacle) (Cable Connecting
Receptacle)
10-101951-XXX
10-101956-XXX
(Jam Nut Receptacle)
Jam Nut Receptacle Caps:
10-101956- XX X
Add desired shell size
Add desired finish suffix†
“1” designates bright cadmium with clear chromate (standard for PC)
“3” designates olive drab cadmium
“5” designates Alumilite®
Caps for PC connectors are supplied only in proprietary versions with standard
bead chains only (as shown in drawing at left).
PLUG PROTECTION CAPS – FOR PC
B
B
Shell
Size
A Thread
Class 2A
+.010
–.000
G
Max.
L
Max.
X
±.250
L
A
6
8
.3750 DS
.5000 DS
.6250 DS
.7500 DS
.8750 DS
1.0000 DS
1.250 DS
1.2500 DS
1.3750 DS
.328
.454
.578
.703
.844
.399
.526
.643
.770
.897
1.025
1.152
1.279
1.416
.557
.557
.557
.557
.557
.557
.557
.557
.557
3.000
3.000
3.000
3.500
3.500
3.500
3.500
4.000
4.000
10
12
14
16
18
20
22
G
X
.969
1.094
1.219
1.343
PLUG PROTECTION CAP
FOR PC CONNECTORS
10-101955-XXX
How to Order Proprietary Plug Caps for PC only: 10-101955-XX X
Add desired shell size
Add desired finish suffix†
“1” designates bright cadmium with clear chromate (standard for (PC)
“3” designates olive drab cadmium
“5” designates Alumilite®
Caps for PC connectors are supplied only in proprietary versions with standard
bead chains only (as shown in drawing at left).
†
Standard accessory finishes are “1” bright cadmium with clear chromate for PC
types, “3” olive drab cadmium for PT and MS/PT types, “5” Alumilite® for SP
types. Electroless nickel plating is also available on some items; consult Amphe-
nol, Sidney, NY
All dimensions for reference only.
67
PT, SP, PC
accessories – dummy receptacles, “O” rings,
plastic dust caps
DUMMY RECEPTACLES – FOR PT, SP, MS/PT
S
Proprietary Version
MS Version
R1
M
+.030
–.000
N
+.001
–.005
.473
.590
.750
.150 DIA. +.004
S¹
M
Shell
Size
K
±.010
R
S
S1
–.002
R
R¹
4 HOLES
±.005
±.010
(TP)
(TP)
K
8
10
12
14
16
18
20
22
24
.062
.062
.062
.062
.062
.062
.062
.062
.062
.462
.462
.462
.462
.462
.462
.556
.556
.589
.734
.812
.938
1.031
1.125
1.203
1.297
1.375
1.500
1.047
1.125
1.250
1.344
1.438
1.516
1.672
1.750
1.875
.594
.719
.828
.954
.812
.906
.969
1.062
1.156
1.250
1.375
1.047
1.141
1.234
1.328
1.453
1.578
1.703
R
S
.875
N
R¹ S¹
1.000
1.125
1.250
1.375
1.500
DUMMY RECEPTACLE
FOR PT, SP, MS/PT CONNECTORS
MS3115-XXX
10-150921-XXX
How to Order Proprietary Dummy Receptacles: 10-150921-XX X
Add desired shell size
Add desired finish suffix†
“1” designates bright cadmium with clear chromate
“3” designates olive drab cadmium
“5” designates Alumilite®
How to Order MS Version Dummy Receptacles: MS3115-XX X
Add desired shell size
Add desired finish suffix†
-A designates Alumilite®
-L designates electroless nickel
-W designates olive drab cadmium
NEOPRENE “O” RINGS – FOR PC
J
T
Shell
Size
Amphenol®
Part Number
J Dia.
±.010
T Dia.
±.003
6
8
10-101937-6
10-101937-8
10-101937-10
10-101937-12
10-101937-14
10-101937-16
10-101937-18
10-101937-20
10-101937-22
.172
.328
.406
.531
.641
.781
.906
.984
1.109
.031
.031
.031
.031
.031
.031
.031
.031
.031
10
12
14
16
18
20
22
NEOPRENE “O” RING
FOR PC CONNECTORS
10-101937-XX
How to order “O” rings: Order by 10- (Proprietary) only as shown
in chart above.
PLASTIC DUST CAPS
FOR PT, SP
FOR PC
Shell
Size
Plug
Plastic Dust Cap
Receptacle
Plastic Dust Cap
How to Order Plastic Dust Caps:
Shell
Size
Plug
Plastic Dust Cap
Receptacle
Plastic Dust Cap
To the basic order number add the dust cap size to
match connector plug or receptacle shell size, as
shown in the tables above.
Example: 10-70506-12 would be the correct order
number for a plastic dust cap for a PT00 receptacle,
shell size 10.
6
10-70500-8
10-70506-8S
10-70506-10
10-70506-12
10-70506-14
10-70506-16
10-70506-18
10-70506-20
10-79506-22
10-70506-24
10-70524-1
6
8
10-70576-6
10-70576-8
10-70500-8
10-70500-10
10-70500-12
10-70500-14
10-70576-18
10-70576-20
10-70576-22
10-70576-8
10-70500-8
10-70500-10
10-70500-12
10-70500-14
10-70500-16
10-70500-18
10-70500-20
10-70500-22
8
10-70506-12
10-70500-12
10-70506-16
10-70506-18
10-70506-20
10-70506-22
10-70506-24
10-70524-1
10
12
14
16
18
20
22
24
10
12
14
16
18
20
22
All dimensions for reference only.
10-70506-28
68
Application Tools
“SE”, “CE”
The following data includes information pertaining to the application tools for crimping, insert-
ing and removing size 20, 16, and 12 contacts incorporated in Amphenol® Miniature Cylindri-
cal Connectors.
All crimping tools included are the “full cycling” type, and when used as specified by the manu-
facturer, provide reliable crimped wire to contact termination.
Tool frames and turret heads are available from approved tool manufacturers; consult Amphe-
nol, Sidney, NY for listings.
Assembly instructions are available online at www.amphenol-aerospace.com
See the following:
L-786 for SE assembly instructions
L-658 for CE assembly instructions
L-555 for solder type instructions
CRIMPING TOOLS
FOR PT-SE, SP-SE, PC-SE, MS/PT-SE
(MIL-C-26482, Series 1) Connectors
FOR PT-CE, SP-CE, PC-CE (Proprietary)
Connectors
MS Tool Part Number
Contact
MS Tool Part Number
Contact
Size
Tool Frame
M22520/1-01
M22520/1-01
M22520/1-01
Turret Head
M22520/1-02
M22520/1-02
M22520/1-02
Size
Tool Frame
M22520/1-01*
M22520/1-01*
Turret Head
20
20
*
*
16
16
12
* Use Daniels TH254 or equivalent
INSERTION/REMOVAL TOOLS
FOR PT-SE, SP-SE, PC-SE, MS/PT-SE
(MIL-C-26482, Series 1) Connectors
Insertion Tool
Removal Tool
MS
MS
Part Number
Contact
Amphenol®
Contact
Insertion Pliers Insertion Tool
Amphenol®
Contact
Amphenol®
Contact
Part Number
Contact
Contact
Size
Insertion Tool Removal Tool Removal Tool
20
16
12
11-8107-20
11-8107-16
–
11-7401-20
11-7401-16
–
M81969/17-03
M81969/17-04
M81969/17-05
11-7880-20
11-7880-16
–
M81969/19-07
M81969/19-08
M81969/19-09
FOR PT-CE, SP-CE, PC-CE (Proprietary)
Connectors
Insertion/Removal Tool
Contact
Size
Contact Insertion
Contact Removal Tool
Kit
Pliers
20
16
11-6782
11-6781
11-6900
11-6900
69
Contacts - Powe r and The rmocouple Crimp
for miniature cylindrical connectors
The following tables provide part number information for crimp contacts
used in Amphenol® Miniature Cylindrical Connectors. For additional infor-
mation, consult Amphenol, Sidney, NY.
CRIMP CONTACTS for MIL-C-26482, Series 1
(PT-SE, SP-SE) Connectors
Pins
Sockets
Amphenol®
Amphenol®
Proprietary
Number
Contact Accommodates
Size Wire Size
Proprietary
Number
MS Number
MS Number
20
20, 22 & 24 AWG M39029/31-240 10-314980-20P M39029/32-259 LP-597820-355
16, 18 & 20 AWG M39029/31-228 10-314980-16P M39029/32-247 10-257982-16F
16
12
12 & 14 AWG
16 AWG
M39029/31-235 10-807100-125 M39029/32-254 10-807103-125
20-16
16-20
12-10
10-330930-20F
10-330932-16F
10-330938-12F
10-807155-205
10-330933-16F
10-330939-12F
20 AWG
12 AWG
CRIMP CONTACTS for PT-CE (Proprietary) Connectors
Pins
Sockets
Amphenol®
Proprietary
Number
Contact Accommodates
Size Wire Size
Amphenol®
Proprietary Number
20
20, 22 & 24 AWG 10-189000-20F
16 AWG 10-195962-20F
16, 18 & 20 AWG 10-189004-16F
10-597817-351
10-195963-20F
10-189006-16F
20-16
16
THERMOCOUPLE CONTACTS for Miniature Connectors
Pins
Proprietary Part Number
Sockets
Proprietary Part Number
Size
Material
Chromel
Alumel
CE
SE
CE
SE
10-252900-21P
10-252900-22P
10-330940-21P
10-330940-22P
10-252900-21S
10-252900-22S
10-330940-21S
10-330940-22S
16
Crimp
Termination
Iron
Constantan
Chromel
Alumel
10-252900-1P
10-252900-2P
10-252900-3P
10-252900-4P
10-314910-1P
10-314910-2P
10-314910-3P
10-314910-4P
10-330940-1P
10-330940-2P
10-330940-3P
10-330940-4P
10-252900-1S
10-252900-2S
10-252900-3S
10-252900-4S
10-314910-1S
10-314910-2S
10-314910-3S
10-314910-4S
10-330940-1S
10-330940-2S
10-330940-3S
10-330940-4S
20
Crimp
Termination
Iron
Constantan
Chromel
Alumel
20
Solder
Termination††
Iron
Constantan
†† Listed are insertable/removable contacts; however, it is intended that contacts be terminated with solder.
For additional thermocouple contact information, consult Amphenol, Sidney, NY.
See L-776 for thermocouple contact termination instructions. These are online at www.amphenol-aerospace.com
For PCB contacts for miniature connectors, see page 20.
70
Coaxial Contacts
for miniature cylindrical connectors
Amphenol® Miniature Connectors can incorporate shielded coax contacts.
The Miniature family is built around MIL-C-26482 specifications, with Mil-
approved and proprietary styles offered. Normal operating voltage for Minia-
ture cylindricals with power only contacts is up to 1,000 VAC (RMS) at sea
level.
Miniature Cylindricals offer these features for contact termination
flexibility:
Solder Coax Contact
for use in Miniature Solder Type Connectors
•
Several insert arrangements that can incorporate:
• Size 8 & 12 Crimp Coax contacts for Crimp type
• Size 8 & 12 Solder Coax contacts for Solder type
Wide selection of connector shell styles and sizes
Standard power contact options within the various connector styles
include: solder type, crimp front release, crimp rear release
Coax contacts are designed to the same high performance standards as
power contacts. Coax and power contacts may be intermixed with no deg-
radation of connector reliability.
•
•
•
•
No mis-mating or cross-plugging with insert rotation and keyway
polarization.
Pin Crimp Coax Contact
for use in Miniature Crimp SE Type Connectors
GENERAL ORDERING INFORMATION
Amphenol Miniature Cylindricals are normally supplied with a full complement
of power contacts, separately packaged. Coax contacts are ordered by part
number as referenced in the part number charts on the following pages of this
catalog, and are substituted for the power contacts at the time of the cable or
equipment assembly. If the application is for coax only, the connector may be
ordered less contacts and no power contacts will be supplied.
Installation instructions for the coax contacts for Miniature Connectors are
provided in Amphenol documents as follows: L-633 for solder type; L-613 for
SE type; L-660 for CE type.
Socket Crimp Coax Contact
for use in Miniature Crimp SE Type Connectors
HOW TO ORDER:
A. Select the coax contacts designed for the cable being used from the appli-
cable charts in this catalog for each Miniature type (solder, SE or CE).
B. Select a connector insert from those shown on pages60-63 which will
accommodate the quantity and size of coaxial contacts needed plus any
power contacts required. Note: Size 8S and 12S contacts are used with
connector inserts through shell size 18 only. For larger connector shell
sizes, use size 8L contacts.
C. Determine the Miniature Cylindrical type, shell style, finish, service class
and insert rotation required for your application.
D. Consult Amphenol, Sidney NY with the pertinent cable, contact, insert
arrangement and connector style choices for complete connector part
number.
71
Coaxial Contacts
for miniature cylindrical connectors, cont.
®
Amphenol Coaxial Contacts designed for use in Miniature Cylindrical Connectors
offer the same durability advantages and design benefits for reliable interconnection as the
Amphenol coax contacts used in high performance D38999 connectors. A variety of military
and commercial shielded cables are accommodated within the miniature cylindrical series.
Amphenol supplies coax contacts for solder, crimp SE and crimp CE connector styles.
Other features of the coax for miniature cylindricals include:
•
•
•
•
Miniature coax design has an outside nut within the
assembly for fast, reliable assembly of contact to cable.
TYPICAL MINIATURE CRIMP COAX
SOCKET CONTACT has crimp socket outer
contact with a solder pin inner contact
All types feature solder style inner contacts and crimp
style outer contacts for reliable cable termination
Miniature coax crimp type contacts are designed for use
in Miniature crimp series connectors
Miniature coax solder type contacts are designed for
use in Miniature solder series connectors. These
come pre-installed into the solder connector.
TYPICAL ELECTRICAL PERFORMANCE
Size 8 and 12 Coax Contacts
Contact Resistance:
Center @ 1 Amp, 170 millivolts max. voltage drop @ 25°C
Outer @ 12 Amps, 150 millivolts max. voltage drop @ 25°C
TYPICAL MINIATURE CRIMP COAX PIN
CONTACT has crimp pin outer contact
with a solder socket inner contact
Dielectric Withstanding Voltage:
Size 8: 1,300 VAC Rms @ sea level
Size 12: 1,000 VAC Rms @ sea level
Size 8 & 12: 250 VAC Rms @ 50,000 ft.
Insulation Resistance
5,000 megohms minimum @ 25°C
Typical VSWR for size 8 & 12 PT-SE Types II & III only:
1.2 + .12F (GHz) up to 10 GHz
EXPLANATION OF TYPE CLASSIFICATIONS:
PT-SE Type I is moisture seal design with internal O-ring.
PT-SE Type II is 50 ohm impedance matched version. Contacts ter-
minated to other than 50 ohm cables are therefore not matched.
PT-SE Type III is 50 ohm contact, non-serviceable after assembly
Solder and CE Types are non-impedance matched contacts.
CONTACT FINISHES:
Suffix
Finish
1
2
3
4
5
E
F
H
0.00020 min. silver over copper flash
0.00005 min. gold (Knoop hardness 130-200) over silver
0.00010 min. gold (Knoop hardness 130-200) over silver
0.00010 min. gold (Knoop hardness 130-200) over copper
0.00005 min. gold (Knoop hardness 130-200) over nickel
0.00005 min. gold (Knoop hardness 90 max.) over copper
0.00005 min. gold (Knoop hardness 130-200) over copper
0.00010 min. gold (Knoop hardness 130-200) over copper
72
Coaxial Contacts
for miniature cylindrical connectors, cont.
solder (MIL-C-26482 Series 1 type) - application data
MATING
PIN DIA
H
L
F
G
SOCKET
L
H
F
MATING
G
PIN DIA
PIN
NOTE: All contacts of the same size and the same inner and outer contact
diameters (G & H) will mate with each other.
SOLDER COAX CONTACTS
For use in Miniature Solder Type Connectors: PT, SP, MS/PT and PC Styles
Dimensional Data
(See Drawings above)
Contact Part Number
Crimp Ferrule Tools
L
Contact
Size
Length Ref.
Retainer Nut
Wrench
F
Cable
H
Dia.
±0.001
G
Dia.
Across
Flats
±0.004
MIL-T-22910/7-1
Tool
Use with Die Part
Number
MIL-C-22520/5-01
Tool
Use with Die Part
Number
MIL-C-22520/10-01
Tool
Use with Die Part
Number
Pin
Socket
Pin Socket
RG-58C/U,
RG-141A/U,
RG-303/U
0.040
± 0.001
M22520/5-05 (B)
M22520/5-41 (B)
21-33020-2
21-33019-2
8S
0.219
0.280
1.114 1.115
M22910/7-15 (B)
M22520/10-07 (B)
11-8676-2
0.040
± 0.001
RG-59B/U,
RG-62A/U,
RG-62B/U,
RG-210/U
21-33020-1
21-33020-3
21-33019-1
21-33019-3
8L
8S
8S
0.219
0.219
0.219
0.280
0.280
0.280
1.176 1.177
1.114 1.115
1.114 1.115
M22910/7-18 (B)
M22910/7-16 (B)
M22520/5-45 (B)
M22520/5-43 (B)
11-8676-3
11-8676-2
0.040
± 0.001
RG-142B/U,
Times MI51115
0.040
± 0.001
21-33020-7* 21-33019-7*
RG-161/U,
RG-174A/U,
RG-179B/U,
RG-187A/U,
RG-188A/U,
RG-316/U
M22520/5-03 (A)
M22520/5-08 (A)
M22520/5-35 (B)
0.0300
± 0.0005
21-33020-32* 21-33019-32*
12S
0.140
0.172
1.092 1.093
M22910/7-12 (B)
M22520/10-05 (A)
11-8676-1
0.040
± 0.001
M22520/5-03 (B)
M22520/5-33 (B)
RG-178B/U
RG-196A/U
21-33020-4
21-33019-4*
8S
0.219
0.140
0.280
0.172
1.114 1.115
1.092 1.093
M22910/7-11 (B)
M22910/7-11 (B)
M22520/10-05 (B)
M22520/10-05 (B)
11-8676-2
11-8676-1
0.0300
± 0.0005
M22520/5-03 (B)
M22520/5-33 (B)
21-33020-31† 21-33061-31*†
21-33020-5* 21-33019-5*
12S
RG-180B/U,
RG-195A/U,
Raychem
0.040
± 0.001
M22520/5-05 (B)
M22520/5-41 (B)
8S
0.219
0.280
1.114 1.115
M22910/7-15 (B)
M22520/10-07 (B)
M22520/10-07 (B)
11-8676-2
5022D1312-9
Raychem
5021D1331-9
0.040
± 0.001
M22520/5-05 (B)
M22520/5-41 (B)
21-33020-6* 21-33019-6*
21-33020-33 21-33061-33
8S
0.219
0.140
0.280
0.172
1.114 1.115
1.092 1.093
M22910/7-15 (B)
M22910/7-13 (B)
11-8676-2
11-8676-1
Thermatics
2929-29
0.0200
± 0.0005
12S
M22520/5-37 (B)
NOTE: Contacts can be ordered by part numbers given in chart
* Consult Amphenol, Sidney NY for availability
NOTE: Size 8S and 12S contacts are used with connector inserts through
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers
indicate applicable die closure. Commercial equivalents with the same die closure
dimension may be used.
shell size 18 only. For larger connector shell sizes, use size 8L contacts.
CONTACT FINISH: For all contacts in this series feature 0.000050 minimum
gold (Knoop hardness 130-200).
†
21-33020-31 and 21-33061-31 only mate with each other
73
Coaxial Contacts
for miniature cylindrical connectors, cont.
crimp SE (MIL-C-26482 Series 1 type) - application data
L
L
F
G
H
G
H
MATING
PIN DIA
MATING
PIN DIA
F
SOCKET
PIN
NOTE: All contacts of the same size and the same inner and outer contact
diameters (G & H) will mate with each other.
SE CRIMP COAX CONTACTS
For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, MS/PT-SE and PC-SE Styles
Dimensional Data
(See Drawings above)
Installation Tools
Finish
on
Mating
Parts
(See
Contact Part Number
Crimp Ferrule Tools
L
Retainer
Nut
Wrench
Type
(See
Pg. 23)
Contact
Size
Length Ref.
F
Cable
H
Dia.
±0.001
G
Across
Flats
±0.004
MIL-T-22910/7-1 MIL-C-22520/5-01 MIL-C-22520/10-0
Insertion Removal
Dia.
Tool
Tool
Tool
Pg. 23)
Pin
Socket
Pin Socket
Use with Die Part Use with Die Part Use with Die Part
Number
Number
Number
21-33012-21 21-33011-21
21-33012-25 21-33011-25
8
8
I
II
2
4
RG-55B/U,
RG-142A/U, 21-33038-21 21-33037-21
RG-142B/U, 21-33038-25* 21-33037-25
8
8
I
II
0.0355
±0.0010
M22520/5-05 (A)
M22520/5-19 (B)
11-8369-5 11-7880-8
11-8660-5 11-8154-1
0.218
0.218
0.280 1.156 1.144 M22910/7-17 (B)
0.280 1.156 1.144 M22910/7-15 (B)
M22520/10-07 (A) 11-8676-2
M22520/10-07 (B) 11-8676-2
RG-223/U
21-33138-21( )* 21-33137-21( )*
21-33138-25( )* 21-33137-25( )*
8
8
I
II
**
2
21-33012-22 21-33011-22
21-33012-26 21-33011-26
8
8
I
II
RG-58C/U,
21-33038-22* 21-33037-22
RG-141A/U,
8
8
I
II
0.0355
±0.0010
M22520/5-05 (B)
M22520/5-41 (B)
11-8369-4 11-7880-8
11-8660-4 11-8154-1
4
21-33038-26* 21-33037-26*
RG-303/U
21-33138-22( )* 21-33137-22( )
21-33138-26( )* 21-33137-26( )*
8
8
I
II
**
RG-59B/U,
RG-62A/U,
RG-62B/U,
21-33012-36 21-33011-36
21-33038-36* 21-33037-36
8
8
8
8
8
8
II
II
II
II
II
II
2
4
0.0355
±0.0010
11-8369-5 11-7880-8
11-8660-5 11-8154-1
0.218
0.218
0.280 1.156 1.144 M22910/7-18 (B) M22520/5-45 (B)
11-8676-3
RG-210/U 21-33138-36( )* 21-33137-36( )
21-33012-37* 21-33011-37*
RG-140/U,
RG-302/U
**
2
0.0355
±0.0010
M22520/5-05 (A)
0.280 1.156 1.144 M22910/7-17 (B)
M22520/5-19 (B)
11-8369-5 11-7880-8
11-8660-5 11-8154-1
21-33038-37* 21-33037-37*
4
M22520/10-07 (A) 11-8676-2
21-33138-37( )* 21-33137-37( )*
**
21-33012-34 21-33011-34
21-33012-30 21-33011-30
8
8
I
II
2
4
21-33038-34 21-33037-34
21-33038-30 21-33037-30
8
8
I
II
0.0355
±0.0010
11-7880-8
11-8154-1
0.218
0.280 1.156 1.144
11-8676-2
RG-161/U,
21-33138-34( )* 21-33137-34( )*
RG-174A/U,
8
8
I
II
**
2
M22520/5-03 (A)
M22910/7-12 (B) M22520/5-08 (A) M22520/10-05 (A)
21-33138-30( )* 21-33137-30( )*
RG-179B/U,
RG-187A/U,
RG-188A/U,
RG-316/U
11-8369-2
11-8660-2
21-33012-1
21-33012-4
21-33011-1
21-33011-4
12
12
I
II
M22520/5-35 (B)
21-33038-1* 21-33037-1*
21-33038-4 21-33037-4*
12
12
I
II
0.0200
±0.0005
11-7880-12
11-8154-2
4
0.128
0.218
0.128
0.172 1.092 1.072
0.280 1.156 1.144
11-8676-1
11-8676-2
21-33138-1( )* 21-33137-1( )
12
I
**
21-33138-4( )* 21-33137-4( )* 12
II
21-33012-35 21-33011-35
21-33038-35 21-33037-35
21-33138-35( )* 21-33137-35( )*
21-33012-3* 21-33011-3*
8
8
8
I
I
I
2
4
0.0355
±0.0010
11-7880-8
11-8154-1
**
12
12
I
II
RG-178B/U,
RG-196A/U
M22520/5-03 (B)
M22520/5-33 (B)
11-8369-1
11-8660-1
2
4
M22910/7-11 (B)
M22520/10-05 (A)
21-33012-5
21-33038-3* 21-33037-3*
21-33038-5 21-33037-5*
21-33011-5
12
12
I
II
0.0200
± 0.0005
11-7880-12
11-8154-2
0.172 1.092 1.072
11-8676-1
21-33138-3( )* 21-33137-3( )* 12
21-33138-5( )* 21-33137-5( )* 12
I
II
**
NOTE: Contacts can be ordered by part numbers given in chart
* Consult Amphenol, Sidney NY for availability
** See finish options for SE crimp Miniature contacts listed on page 70. Replace the paren-
thesis of the contact part number with the finish suffix number. However, you should con-
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indi-
cate applicable die closure. Commercial equivalents with the same die closure dimension
74
Coaxial Contacts
for miniature cylindrical connectors, cont.
crimp SE (MIL-C-26482 Series 1 type) - application data, cont.
NOTE: All contacts of the same size and the same inner and outer contact
diameters (G & H) will mate with each other.
SE CRIMP COAX CONTACTS
For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, MS/PT-SE and PC-SE Styles
Dimensional Data
(See Drawings pg. 25)
Installation Tools
Finish
on
Mating
Parts
(See
Contact Part Number
Crimp Ferrule Tools
L
Type
(See
Pg. 23)
Retainer
Nut
Wrench
Contact
Size
Length Ref.
F
Cable
H
Dia.
±0.001
G
Across
Flats
±0.004
MIL-T-22910/7-1 MIL-C-22520/5-01 MIL-C-22520/10-0
Insertion Removal
Dia.
Tool
Tool
Tool
Pin
Socket
Pin Socket
Pg. 23)
Use with Die Part Use with Die Part Use with Die Part
Number
Number
Number
21-33012-24 21-33011-24
21-33012-46* 21-33011-46*
8
8
I
II
2
4
RG-180B/U, 21-33038-24 21-33037-24
RG-195A/U 21-33038-46* 21-33037-46*
8
8
I
II
0.0355
± 0.0010
M22520/5-05 (B)
M22520/5-41 (B)
11-8369-4 11-7880-8
11-8660-4 11-8154-1
0.218
0.128
0.128
0.280 1.156 1.144 M22520/7-15 (B)
M22520/10-07 (B) 11-8676-2
21-33138-24( )* 21-33137-24( )*
21-33138-46( )* 21-33137-46( )*
8
8
I
II
**
Raychem
9527E1118,
RG-180B/U,
RG-195A/U
0.0200
± 0.0005
Daniels GS200 Tool with G2P330 or
M22520/31-01 Tool with Positioner M22520/31-02
11-8674- 11-7880-12
21-33106-40( ) 21-33105-40( ) 12
III
**
0.899 0.879
0.172 1.092 1.072
0.280 1.156 1.144
12
11-8154-2
21-33012-6* 21-33011-6*
21-33012-7* 21-33011-7*
12
12
I
II
2
4
RG-188 or
RG-316
Double Braid
21-33038-6* 21-33037-6*
21-33038-7* 21-33037-7*
12
12
I
II
0.0200
± 0.0005
11-8369-2 11-7880-12
11-8660-2 11-8154-2
11-8676-1
21-33138-6( )* 21-33137-6( )* 12
21-33138-7( )* 21-33137-7( )* 12
I
II
M22910/7-13 (B) M22520/5-37 (B)
**
21-33012-44 21-33011-44
21-33038-44* 21-33037-44*
21-33138-44( )* 21-33137-44( )*
21-33012-28 21-33011-28
21-33038-28* 21-33037-28*
21-33138-28( )* 21-33137-28( )*
8
8
8
8
8
8
II
II
II
I
2
4
Thermax
50C-25A-
DS-1
0.0355
± 0.0010
11-8369-4 11-7880-8
11-8660-4 11-8154-1
0.128
0.128
11-8676-2
11-8676-2
**
2
RG-195
Double Braid
0.0355
± 0.0010
11-8369-4 11-7880-8
11-8660-4 11-8154-1
I
4
0.280 1.156 1.144 M22910/7-16 (B) M22520/5-43 (B)
I
**
21-33012-23 21-33011-23
21-33012-27 21-33011-27
8
8
I
II
2
4
RG-122/U,
Raychem
5022E5111
21-33038-23* 21-33037-23*
21-33038-27 21-33037-27
8
8
I
II
0.0355
± 0.0010
M22520/5-05 (B)
0.280 1.156 1.144 M22520/7-15 (B)
M22520/5-41 (B)
11-8369-4 11-7880-8
11-8660-4 11-8154-1
21-33138-23( )* 21-33137-23( )*
21-33138-27( )* 21-33137-27( )*
8
8
I
II
0.218
M22520/10-07 (B) 11-8676-2
**
21-33012-31 21-33011-31
21-33038-31 21-33037-31
21-33138-31( )* 21-33137-31( )*
21-33012-39 21-33011-39
21-33038-39* 21-33037-39*
21-33138-39( )* 21-33137-39( )*
21-33012-40* 21-33011-40
21-33038-40* 21-33037-40*
21-33138-40* 21-33137-40( )*
21-33012-43 21-33011-43
21-33038-43 21-33037-43
8
8
I
2
4
Raychem
9530D5314
I
8
I
**
2
8
II
II
II
II
II
II
II
II
II
Raychem
9527A1317
0.0355
± 0.0010
M22520/5-05 (B)
0.280 1.156 1.144 M22910/7-15 (B)
M22520/5-41 (B)
11-8369-4 11-7880-8
11-8660-4 11-8154-1
8
4
0.218
0.218
0.128
M22520/10-07 (B) 11-8676-2
8
**
2
8
M22520/5-03 (A)
Raychem
7527A1318
0.0355
± 0.0010
11-8369-2 11-7880-8
11-8660-2 11-8154-1
8
4
0.280 1.156 1.144 M22910/7-12 (B) M22520/5-08 (A) M22520/10-05 (A) 11-8676-2
M22520/5-35 (B)
8
**
2
Westrex
199-49-1,
Tensolite
12
12
0.0200
± 0.0005
M22520/5-03 (B)
M22520/5-33 (B)
11-8369-1 11-7880-12
11-8660-1 11-8154-2
4
0.172 1.092 1.072 M22910/7-11 (B)
M22520/10-05 (B) 11-8676-1
21-33138-43( )* 21-33137-43( )* 12
**
30850/87T-1
NOTE: Contacts can be ordered by part numbers given in chart
* Consult Amphenol, Sidney NY for availability
** See finish options for SE crimp Miniature contacts listed on page 70. Replace the paren-
thesis of the contact part number with the finish suffix number. However, you should con-
sult Amphenol, Sidney, NY regarding the availability of all finish choices for each part
number.
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indi-
cate applicable die closure. Commercial equivalents with the same die closure dimension
may be used.
75
Coaxial Contacts
for miniature cylindrical connectors, cont.
crimp CE (MIL-C-26482 Series 1 type) - application data
MATING
PIN DIA
H
MATING
PIN DIA
G
L
L
F
H
F
G
SOCKET
PIN
NOTE: All contacts of the same size and the same inner and outer contact
diameters (G & H) will mate with each other.
CE CRIMP COAX CONTACTS
For use in Miniature Crimp Type Connectors: PT-CE, SP-CE and PC-CE Styles
Dimensional Data
(See Drawings above)
Crimp Ferrule Tools
L
Contact Part Number
Installation Tools
Retainer
Contact
Size
Length Ref.
F
Cable
Nut
MIL-C-22520/10-01 Wrench
Tool
G
Dia.
H
Dia.
Across
Flats
±0.004
MIL-T-22910/7-1
Tool
MIL-C-22520/5-01
Tool
± 0.001 ±0.001
Pin
Socket
Pin Socket
Insertion Removal
Use with Die Part
Number
Use with Die Part
Number
Use with Die Part
Number
RG-58C/U,
RG-141A/U, 21-33024-1 21-33023-1
RG-303/U
M22520/5-01 (B)
M22520/5-41 (B)
11-8369-4
11-7310
8
8
0.040
0.040
0.219
0.219
0.280 1.239 1.285
0.280 1.039 1.085
M22910/7-15 (B)
M22910/7-11 (B)
M22520/10-07 (B) 11-8676-2
M22520/10-05 (B) 11-8676-2
11-8660-4
RG-178B/U,
M22520/5-03 (B)
M22520/5-33 (B)
11-8369-1
11-7310
21-33024-2 21-33023-2
RG-196A/U
11-8660-1
NOTE: Contacts can be ordered by part numbers given in chart
Consult Amphenol, Sidney NY for availability
*
CONTACT FINISH: for all contacts in this series feature 0.000050 minimum gold (Knoop hardness 130-200).
CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die
closure. Commercial equivalents with the same die closure dimension may be used.
76
Mounting Re c omme ndations
for miniature cylindrical connectors
FLANGE MOUNTED CONNECTORS
FLANGE MOUNTED CONNECTORS
All flange mounting PC and PT connectors use standard MS
mounting dimensions. They cannot be back panel mounted
due to coupling clearance. The PTB (thru-bulkhead) type con-
nector must also be back panel mounted on one side. Flange
gaskets are available for both series, see page 64.
4 HOLES
.120 Dia. for Shell Sizes 6-22
PC & PT
.147 Dia. for
Size 24 PT
No. 4 Screw
for PC & PT
No. 6 Screw
for SP and for
Size 24 PT
R
(TP)
.150 Dia. for
SP only
R
(TP)
D
Dia.
Shell
Size
D Dia.
PC & PT
SP
.641
.734
.812
.938
1.031
1.125
1.203
1.297
1.375
–
PC & PT
SP
.439
.563
.680
.859
.984
1.108
1.233
1.358
1.483
–
6
8
.469
.594
.323
.449
R
2
10
12
14
16
18
20
22
24
.719
.573
.812
.699
.906
.823
R
2
SECTION
CUT-OUT
.969
.949
1.062
1.156
1.250
1.375
1.073
1.199
1.323
1.449
JAM NUT MOUNTINGS
JAM NUT MOUNTINGS
The jam nut design has become very popular because it allows
bench wiring of harness assemblies. The labor saving often off-
sets the added cost of the jam nut receptacle which is due to
the self contained “O” ring and the extra nut. The PC series
mounts in a round hole and can be pinned to prevent rotation.
The PT series mounts in a “D” mounting hole and does not
require pinning.
F
B
F
R
P
R
+.010
–.000
B
+.000
–.010
Panel Thickness
Shell
Size
F
±.010
Min.
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
Max.
.125
.125
.125
.125
.125
.125
.125
.250
.250
.250
6
8
.447
.572
.420
.542
.286
.331
.375
.442
.486
.530
.573
.641
.685
–
CUT-OUT FOR
PT ONLY
10
12
14
16
18
20
22
24
.697
.669
PIN LOCATION FOR PC ONLY
SECTION
.884
.830
1.007
1.134
1.259
1.384
1.507
1.634
.955
1.084
1.208
1.333
1.459
1.575
HERMETIC RECEPTACLES
HERMETIC RECEPTACLE MOUNTINGS
This series must be mounted in such a way as to preserve the
hermetic seal provided by the glass insert. Mounting data for
box and jam nut receptacles is given above. Cut-out required
for solder mounting receptacles (N) is given below.
N
The finish of each of these hermetic
receptacles is fused electro-deposited
tin for easy solderability, and protected
by a special lacquer for optimum shelf
life. The lacquer will not interfere with
any soldering operation.
Low temperature solder should be used
and the addition of a solder fillet at
arrow points on drawing at right is rec-
ommended. Care must be taken that
the operating temperature of the final
assembly does not rise above the melt-
Shell
Size
N
Max.
6
8
.458
.582
10
12
14
16
18
20
22
.692
.801
JAM NUT
BOX
SOLDER
RECEPTACLE
.926
CUT-OUT
RECEPTACLE
(See dimensions
above)
RECEPTACLE
(See dimensions
above)
1.051
1.176
1.395
1.375
77
Othe r Amphe nol Miniature Cylindrical
Conne c tors
MIL-C-26482, Series 2
MIL-C-26482, Series 2 connectors are provided with the Amphe-
nol®/Matrix® family of miniature cylindricals These are bayonet
coupling type, and they feature crimp contacts that are rear insert-
able and rear releasable.
There are six shell styles available and 34 insert arrangements.
Military part numbers of the Matrix MIL-C-26482 family include the
following:
MS3470 wall mounting receptacle with narrow flange
MS3472 wall mounting receptacle with wide flange
MS3471 cable connecting receptacle
MS3474 jam nut receptacle
MS3476 straight plug
MS3475 plug with RFI grounding fingers
See catalog 12-071 for more information.
Geophysical Miniature Cylindricals
MIL-C-26482
Designed for the Geophysical industry’s rugged environments, the
Series 2
Amphenol® Geophysical Series connector has custom features
that provide reliability in extreme temperature and moisture condi-
tions.
The unique shell design provides stronger shells along with an
anodized (nonconductive) finish for greater salt, corrosion and
abrasion resistance. Coupling nuts are manufactured with round
detent holes and are sold separately for greater customer flexibil-
ity. See product data sheet #146.
RJ Field Bayonet MIL-C-26482 Cylindricals
Amphenol PCD division provides MIL-C-26482 bayonet coupling
cylindrical connectors with an RJ45 Ethernet interface*. These are
Geophysical
Miniature Cylindricals
designed for use in all levels of harsh environments from industrial
to mil-aero applications providing IP67 protection from dust, fluids,
vibration, shock and traction. The Amphenol® RJ Field allows the
use of Ethernet Class D/Cat 5 and Cat 5e connections for 10
BaseT, 100 Base TX, or 1000 BaseT networks. It works with any
standard RJ45 cordset with no extra tooling. It also offers rein-
forced EMI protection.
For more information go online to www.rjfield.com or ask for the
Field Series brochure.
*
Other Field Series products are available through Amphenol PCD. These include
RJF TV within MIL-DTL-38999 Series III threaded coupling connectors, and RJF
544 within ECTA push-pull plastic shell coupling.
RJ Field Bayonet
MIL-C-26482 Cylindricals
78
相关型号:
MS3120P16-26S
MIL Series Connector, 26 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle,
AMPHENOL
MS3120P18-32S
MIL Series Connector, 32 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle,
AMPHENOL
MS3120P18-32SW
MIL Series Connector, 32 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle,
AMPHENOL
MS3120P20-41PY
MIL Series Connector, 41 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle,
AMPHENOL
MS3120P22-21P
MIL Series Connector, 21 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle,
AMPHENOL
MS3120P22-41S
MIL Series Connector, 41 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle,
AMPHENOL
MS3120P22-55P
MIL Series Connector, 55 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle,
AMPHENOL
MS3120P22-55P-LC
MIL Series Connector, 55 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle,
AMPHENOL
MS3120P22-55PX
MIL Series Connector, 55 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle,
AMPHENOL
MS3120P22-55PZ
MIL Series Connector, 55 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle,
AMPHENOL
MS3120P22-55SW
MIL Series Connector, 55 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle,
AMPHENOL
MS3120P22-55SX
MIL Series Connector, 55 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle,
AMPHENOL
©2020 ICPDF网 联系我们和版权申明