MS3127E14-15PX_技术文档

®

Amphenol

PT Series

Miniature Cylindrical Connectors

12-070-19

www.amphenol-industrial.com

Amphenol^®97 Series Connectors are UL recognized and CSA recognized.

If more information is needed concerning

the connectors covered in this publication,

or if there are special application needs,

please contact:

Table of Contents Page

Introduction, Amphenol® Miniature Cylindrical

General Information, Design Flexibility . . . . . . . . . . . . . . 1, 2

Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . 3

Insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 5

Alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Insert arrangement patterns . . . . . . . . . . . . . . . . . . . . . . . . . 7-10

PT, SP, MS/PT Proprietary/MIL-DTL-26482, Series 1

Amphenol Corporation

Amphenol Industrial Operations

191 Delaware Avenue

Sidney, New York 13838-1395

Telephone: 888-364-9011

Bayonet Coupling, Solder Contacts

Fax: 520-397-7169

ꢀ

GeneralꢀInformation,ꢀSpeciﬁcations,ꢀServiceꢀClassꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ11,ꢀ12

PT00 (MS3110), SP00 wall mounting receptacle . . . . . . . . . 13

PT01 (MS3111) cable connecting receptacle . . . . . . . . . . . .14

PT02 (MS3112) SP02 box mounting receptacle . . .. . . . . . . .15

PT06 (MS3116) SP06 straight plug . . . . . . . . . . . . . . . . . .16

PT07 (MS3114) SP07 jam nut receptacle . . . . . . . . . . . . . . . . . . . 17

PT08E, SP08E 90 degree plug . . . . . . . . . . . . . . . . . . . . .18

PT Connectors with Printed Circuit Board Contacts -

Please go to the Amphenol websites to

view, download and save this catalog and

most all of Amphenol interconnection

product literature.

www.amphenol-industrial.com

Some miniature connector styles are

available in RoHS Compliant versions.

Please contact Amphenol Industrial

Operations for more information.

box mount receptacle, jam nut receptacle . . . . . . . . . . . . . . . . . . .19

PTB, SPB thru bulkhead receptacle . . . . . . . . . . . . . . . . . . . . . . . . .20

GeneralꢀInformation,ꢀSpeciﬁcationsꢀ-ꢀPTꢀhermeticꢀꢀꢀꢀꢀ.ꢀꢀ.ꢀꢀ.ꢀꢀ.ꢀꢀ.ꢀꢀꢀ.ꢀ.ꢀ21

PTIH (MS3113H) hermetic solder mounting receptacle . . . . . . 22

PT02H hermetic box mounting receptacle . . . . . . . . . . . . . 23

PT07H (MS3114H) hermetic jam nut receptacle . . . . . . . . . .24

PT, SP, MS/PT how to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

ꢀ

PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-DTL-26482, Series 1

Bayonet Coupling, Crimp Contacts

ꢀ

GeneralꢀInformation,ꢀSpeciﬁcations,ꢀServiceꢀClassꢀꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ.26,ꢀ27

PT00SE (MS3120), SP00SE wall mounting receptacle . . . . . . . . .28

MF00SE (MS3128) wall mounting receptacle . . . . . . . . . . . . . . . . .29

PT01SE (MS3121) SP01SE cable connecting receptacle . . . . . .30

PT02SE (MS3122) SP02SE box mounting receptacle . . . . . . . 31

MF02SE (MS3127) box mounting receptacle . . . . . . . . . . . . . . . .. 32

PT06SE (MS3126), SP06SE straight plug . . . . . . . . . . . . . . 33

PT07SE (MS3124) SP07SE jam nut receptacle . . . . . . . . . . 34

PT08SE, SP08SE 90 degree plug . . . . . . . . . . . . . . . . . . 35

PT-SE, SP-SE, MS/PT-SE how to order . . . . . . . . . . . . . . . . 36

Amphenol operates Quality Systems

thatꢀareꢀcertiﬁedꢀtoꢀISOꢀ9001:2015;ꢀISOꢀ

14001:2015;ꢀISO/TSꢀ16949:2016ꢀbyꢀthirdꢀ

party registrars.

NOTE:

The connector products in this brochure

were formerly known as Bendix®

products. These products are now

manufactured and sold under the

Amphenol® brand name. The name

“Amphenol” will replace the name “Bendix”

on products and literature in the future.

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-40

Glands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Application tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Contacts, Power and Thermocouple Crimp . . . . . . . . . . . . . . . . . 43

Contacts, Shielded Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-48

Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .49

Other Amphenol Miniature Cylindrical Connectors . . . . . . . . . . . . . . . . . . 50

NOTE:

Proprietary/MIL-DTL-26482 Series 1 connectors covered in this

catalog are widely used in general duty and environmental

applications, both industrial and military. Markets that use this

family of connectors include:

The Miniature MIL-DTL-26482, Series

2 connectors PTS-DR and MS/PTS-DR

(formerly in this catalog) are no longer

supplied with these designations.

Amphenol now supplies the Amphenol®/

Matrix® MIL-DTL-26482, Series 2. (Military

numbers include MS3470 - MS3472,

MS3474, - MS3476).

• Instrumentation

• Monitoring Equipment

• Machine Tool, Factory Automation

• Communications

• Geophysical

• Industrial Controls and Robotics

• Oil and Petrochemical Industries

• Rail/Mass Transit

• Military/Aerospace

Amphenol® Miniature Cylindrical Connectors

Proprietary/MIL-DTL-26482, Series 1

Amphenol®ꢀMiniatureꢀCylindricalꢀconnectorsꢀoﬀerꢀtwiceꢀtheꢀnumberꢀofꢀcontactsꢀinꢀjustꢀhalfꢀtheꢀsizeꢀofꢀaꢀStandardꢀ

connector. These miniature connectors, are available in several series, each with varying design characteristics

andꢀcustomerꢀoptionsꢀtoꢀmeetꢀcostꢀconsiderationsꢀandꢀprovideꢀmaximumꢀdesignꢀﬂexibility.ꢀThereꢀareꢀtwoꢀstylesꢀ

withinꢀtheꢀfamilyꢀthatꢀareꢀMSꢀapprovedꢀandꢀqualiﬁedꢀtoꢀMIL-DTL-26482,ꢀSeriesꢀ1,ꢀandꢀinꢀadditionꢀthereꢀareꢀseveralꢀ

proprietary styles.

Common features of all styles:

•

All are for general duty applications and environmental sealing is achieved with the grommet and clamp design.

Operatingꢀtemperatureꢀisꢀfromꢀ–55°Cꢀtoꢀ+125°;ꢀOperatingꢀvoltageꢀtoꢀ1000ꢀVACꢀ(RMS)ꢀatꢀseaꢀlevel.

Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and

provideꢀanꢀindeﬁniteꢀshelfꢀlife.

All have resilient inserts which provide high dielectric strength and moisture barrier.

Aꢀvarietyꢀofꢀshellꢀﬁnishesꢀ(includingꢀnon-cadmium)ꢀandꢀaꢀvarietyꢀofꢀback-endꢀaccessoriesꢀareꢀavailableꢀwithinꢀtheꢀ

styles.

•

Bayonet Coupling with Solder Contact Termination

PT, MS/PT (solder)

Options

•

MS and proprietary versions

Factory installed solder contacts

3 point bayonet coupling and 5 key/key-

way mating.

•

7 shell styles with 60 insert

patterns

Hermetic seal (glass fusion)

receptacle styles available

Pressurizedꢀthruꢀbulkheadꢀ

receptacle style available

Per-installed coax solder con-

tacts are available

•

Intermateable with all miniature series

connectors.

MS/PT meets MIL-DTL-26482 Series 1,

service classes E, F and P.

MS/PTꢀisꢀULꢀrecognized.

PT Solder

jam nut receptacle and

mated straight plug

Printed circuit board contacts

are available

SP (solder)

•

SPꢀSeriesꢀisꢀaꢀmodiﬁcationꢀofꢀtheꢀPTꢀwithꢀ

sameꢀfeaturesꢀexceptꢀaꢀwiderꢀﬂangeꢀforꢀ

back panel mounting

Bayonet Coupling with Crimp Contact Termination

PT-SE, MS/PT-SE (crimp)

Options

•

MS and proprietary versions

Crimp rear insertable/front release

contact termination. (closed entry socket

insert prevents probe damage).

3 point bayonet coupling and 5 key/key-

way mating.

•

6 shell styles with 47 insert

PT Solder

wall mount receptacle

patterns

•

Coax and thermocouple con-

tacts are available

•

Intermateable with all miniature series

connectors.

MS/PT-SE meets MIL-DTL-26482 Series 1,

service classes E, F, P.

SP-SE (crimp)

•

ModiﬁcationꢀofꢀtheꢀPT-SEꢀwithꢀwiderꢀ

ﬂangeꢀforꢀbackꢀpanelꢀmounting

PT-SE Crimp

wall mount receptacle

and mated straight plug

1

Amphenol Miniature Cylindrical

designꢀﬂexibilityꢀ

The large family of miniature proprietary and MS style connectors provides for

many optional features and designs. In addition to the choices of bayonet or threaded

shells, solder or crimp termination within the style variations, there are additional

options that are shown here.

Hermetics

Hermetically sealed receptacles have fused compression

glass sealed inserts which provide environmental moisture

sealing. There are three hermetic styles within the PT

bayonet series.

Coaxial Contacts

Amphenol Miniature connectors can incorporate shielded

coaxꢀcontacts.ꢀSizeꢀ8ꢀandꢀ12ꢀcrimpꢀcoaxꢀcontactsꢀareꢀ

PT Connector with Hermetic

PT Connector with PC Tail

Contacts

availableꢀinꢀPT-SE,ꢀSP-SE,ꢀMS/PT-SE.ꢀFactoryꢀinstalledꢀsizeꢀ8ꢀ

Seal Insert and Coax

and 12 solder type coax contacts are available in PT, SP,

Contacts

MS/PT connectors. See coax contact information pages at

the end of this catalog.

Printed Circuit Board Tail Contacts

PT bayonet connectors in box mounting receptacle and jam nut receptacle styles are

available with printed circuit board contacts. Standard PCB tails for MIL-DTL-26482

connectors have gold plating, .0050 inches over nickel. See page 20 and call Amphenol

for further information.

Flex Circuitry

Flex termination assemblies for attaching cylindrical connectors to printed circuit

boards are available through the Amphenol division ACT, Advanced Circuit

Technology. Flex can be used with miniature 26482 connectors and it can be designed

toꢀmeetꢀspeciﬁcꢀlength,ꢀcurrentꢀcarryingꢀcapacityꢀandꢀtoꢀﬁtꢀtheꢀpreciseꢀgeometricꢀ

shape of the connector to board package. Flex circuity plugs into a printed circuit

board and creates a self-locking terminal pad which eliminates the need for an

additional interconnect to the PCB.

PT Connector with Flex

Filter Protection

AmphenolꢀoﬀersꢀtheꢀFPTꢀSeriesꢀwhichꢀcombinesꢀtheꢀminiatureꢀPTꢀseriesꢀwithꢀanꢀEMI

ﬁlter.ꢀDesignedꢀtoꢀprovideꢀEMIꢀprotectionꢀforꢀsensitiveꢀcircuits,ꢀeachꢀcircuitꢀisꢀ

individuallyꢀﬁlteredꢀwithinꢀtheꢀconnector,ꢀeliminatingꢀtheꢀneedꢀforꢀcostlyꢀandꢀbulkyꢀ

exteriorꢀnetworkꢀﬁlters.ꢀFilterꢀcontactsꢀareꢀavailableꢀinꢀMF,ꢀHF,ꢀVHF,ꢀandꢀUHFꢀrangesꢀ

and are intermateable and intermountable with MIL-DTL-26482 connectors. For

further information see catalog 12-120, Amphenol EMI Filter Transient Protection

Connectors.

PT Connector with EMI

Filter Protection

Overmolded Cable

Overmold seals and cables can be designed for almost any industrial application.

Aꢀvarietyꢀofꢀmaterialsꢀareꢀavailable:ꢀneoprene,ꢀhypalonꢀandꢀothers;ꢀandꢀaꢀvarietyꢀof

lengthsꢀcanꢀbeꢀdesignedꢀtoꢀmeetꢀcustomerꢀspeciﬁcations.ꢀOvermoldꢀsealsꢀtoꢀtheꢀrearꢀ

of the connector and to the cable jacket providing moisture sealing.

PT Connector with

Overmolded Cable

2

Amphenol Miniature Cylindrical

connector selection guide

The accompanying chart is provided to assist the user in selecting the appropriate type of miniature connector to

meetꢀtheꢀapplicationꢀrequirements.ꢀFurtherꢀinformationꢀcanꢀbeꢀfoundꢀinꢀspeciﬁcꢀsectionsꢀofꢀthisꢀcatalog.

Solder

Crimp

MS/ PT-SE

CHARACTERISTICS

Intermateable†

Contacts

PT

O

•

MS/PT

SP

O

PT-SE

O

•

O

Solder

•

Crimp Ri/FR

Non-Removable

Removable

Bayonet

•

Contact Retention System

Coupling

•

Olive Drab Cadmium (003)

Anodic Coated (005)

•

Standard Finishes††

•

Temperature Range

•

Resilient Dielectric (-55°C to +125°C)

Wide Mounting Flange

Hermetic Seal

•

SHELL STYLE AVAILABILITY

Wall Mounting Receptacle “00”

•

**•

•

Cable Connecting Receptacle “01”***

Box Mounting Receptacle “02”

Straight Plug “06”

*•

•

**•

•

Jam Nut receptacle “07”

thru-bulkhead Receptacle “TB”

Solder Mount Receptacle “I”

90° Plug “08”

*•

•

* •

•

*•

•

* •

•

RI/FR = Rear Insertion/Front Releasable

† o intermates with o

††ꢀOptionalꢀﬁnishesꢀavailable.ꢀSeeꢀ“howꢀtoꢀorder”ꢀsections.

* Available in hermetic version

** Dual mounting holes

*** This connector style is sometimes referred to as a cable connecting “plug.”

It does, however, mate with either a straight or 90 degree plug.

3

Amphenol Miniature Cylindrical

insert availability

Crimp

Screw

Solder Termination

Contact Size

Termination Termination

Insert

Total

Arrangement

Contacts

Hermetic

PT

MS-PT

MS/PT-SE

PT-SE

SP-SE

Coax

Service

Rating

MS/PT

PT

SP

PT

20 16 12 10

8

12

8

6-1

8-2

X

S

X

S

X

X*

X

1

2

1

2

3

4

3

2

5

6

7

I

X

I

8-3

X

3

I

8-4

X

4

I

8-33

X

3

I

8-98

3

I

10-2

2

I

10-5

X*

X

5

I

10-6

X

6

I

10-7

X

7

I

10-70

10-98

12-3*

12-4

1

Coax

X

X*

X

6

I

3

II

X*

X

4

I

12-8

X

8

I

12-10

12-14

12-98

14-2

10

14

10

2

10

14

10

2

I

II

14-4

X

4

I

14-5

X

5

II

14-8

8

6

8

2

I

14-12

14-15

14-18

14-19

14-22

14-71

14-91 HV

14-AA

16-8

X

12

15

18

19

5

4

1

I

14

18

19

1

I

X*

X

I

X

I

X*

4

I

P

S

X

4

3

I

X*

3

1

**

X

4

I

X

8

1

II

16-23

16-26

16-70

16-76†††

16-99

18-2

23

26

15

14

23

2

22

26

14

8

I

X

I

1

5

N/A

X*

X

1

***

I

X

21

2

X

2

II

I

18-3

X

3

18-5

X*

5

8

18-8

8

18-11

18-30

X

11

30

11

1

II

I

X*

29

*Not available in MS version

P designates Pin insert only.

†Sizeꢀ12ꢀcontactsꢀforꢀ#10ꢀwire

††Not presently tooled

**Flashoverꢀvoltageꢀ5,000ꢀVACꢀ(RMS)

***1500ꢀVACꢀ(RMS)

4

S designates Socket insert only.

†††Contacts must be ordered separately

Amphenol Miniature Cylindrical

insert availability, cont.

Solder Termination

Crimp Termination

Contact Size

Coax

Insert

Total

Contacts

Hermetic

PT

MS-PT

MS/PT-SE

PT-SE

SP-SE

Service

Rating

Arrangement

MS/PT

PT

SP

20

16

12

8

18-32

18-71

18-72

18-75

18-76

18-80

18-91 HV

20-16

20-24

20-25

20-26

20-27

20-39

20-41

20-70

20-90 HV

22-7

X

32

9

32

I

X*

8

1

Coax, II

X

14

4

10

4

3

N/A

4

1

2

Coax

4

II

X

8

6

Coax, I

X*

X

6

**

X

16

24

25

26

27

39

41

14

7

16

II

24

25

26

27

39

41

10

7

I

6

I

X

I

X

2

I

4

7

Coax

X

Hi-Voltage

X*

X

7

Coax

22-21

22-25

22-32

22-34

22-36

X

21

25

32

34

36

21

25

II

I

X*

X

32

34

36

I

22-41

22-55

X

41

55

19

9

27

55

13

2

14

I

22-70

6

7

3

7

I, Coax

22-71

I, Coax

22-72

X

19

7

12

4

31

2

N/A

X*

Coax

22-78†††

22-96

7

II

7†

24-31

31

51

61

49

1

I

X*

X

47

61

45

1

4

I

24-51†††

24-61

X

24-71

2

5

N/A

Coax

24-79

*Not available in MS version

**Flashoverꢀvoltageꢀ5,000ꢀVACꢀ(RMS)

***1500ꢀVACꢀ(RMS)

†Sizeꢀ12ꢀcontactsꢀforꢀ#10ꢀwire

††Not presently tooled

†††Contacts must be ordered separately

5

Amphenol Miniature Cylindrical

alternate positioning

Alternate Positioning

To avoid cross-plugging problems in applications requiring the use of

moreꢀthanꢀoneꢀminiatureꢀcylindricalꢀconnectorꢀofꢀtheꢀsameꢀsizeꢀandꢀ

arrangement, alternate insert rotations are available as indicated in the

accompanying chart.

As shown in the diagram at right, the front face of the pin insert is

Position W

Position X

Position Y

Position Z

rotated within the shell in a clockwise direction from the normal shell

key. The socket insert would be rotated counterclockwise the same

number of degrees in respect to the normal shell key.

Viewsꢀlookingꢀintoꢀfrontꢀfaceꢀofꢀpinꢀinsertꢀorꢀrearꢀofꢀsocketꢀinsert.

Insert Rotation

Degrees

Shell

Size

Insert

Arrangement

Shell

Size

Insert

Arrangement

W

-

X

Y

-

Z

W

55

180

62

180

85

18

53

45

-

X

Y

Z

6

6-1

8-2*

-

122

210

97

-

18

20

22

24

18-5

18-8

97

-

263

-

315

-

8

58

60

45

90

-

8

8-3

-

18-11*

18-30*

18-32*

18-71

18-72

18-75

18-76

18-80

18-91HV

20-16*

20-24

20-25

20-26

20-27

20-39*

20-41*

20-70

20-90

22-7

119

193

138

108

102

-

241

285

222

127

213

-

340

350

265

215

293

-

8

8-4*

184

-

8

8-33*

8-98

-

8

-

10

12

14

16

18

10-2

45

90

-

90

151

-

315

180

-

10-5*

10-6*

10-7

270

-

45

90

238

70

72

13

72

63

45

63

45

19

16

60

72

62

72

39

30

33

42

19

90

22

90

39

-

90

135

240

333

215

216

210

216

252

225

222

225

-

160

270

347

290

288

322

288

333

-

10-70

10-98*

12-3

-

180

318

145

144

107

144

126

135

41

90

-

180

-

240

180

-

270

-

12-4*

12-8

38

90

60

-

292

295

-

112

155

-

203

270

-

12-10*

12-14

12-98*

14-2

61

58

45

40

48

43

17

15

30

45

-

135

122

-

189

-

340

-

335

315

-

14-4*

14-5*

14-8

-

92

162

90

110

90

165

-

184

189

-

273

312

-

22-21*

22-25

22-32

22-34

22-36

22-41

22-55*

22-70

22-71

22-72

22-78

22-96*

24-31

24-51

24-61*

24-71

24-79

135

125

145

142

144

135

142

82

175

211

215

218

216

264

226

218

236

277

-

349

336

288

298

288

-

14-12*

14-15*

14-18*

14-19*

14-22

14-71

14-91HV

14-AA*

16-8*

16-23

16-26*

16-70

16-76

16-99*

18-2

155

180

315

-

234

270

-

314

312

270

339

-

60

-

45

54

158

60

41

-

191

200

41

152

270

-

180

-

331

-

275

216

-

338

286

-

41

-

122

-

225

171

180

131

-

255

313

270

205

-

66

58

-

156

122

-

223

-

340

-

324

281

-

18-3

180

-

6

* Available in Hermetic Class

Amphenol Miniature Cylindrical

insert arrangements

D

C

A

B

A

C

A

C

B

A

B

Insert Arrangement

Service Rating

6-1

I

8-2

8-3

I

8-4

I

8-33

8-98

10-2

I

Number of Contacts

Contact Size

1

2

3

4

3

2

20

16

A

F

A

F

E

A

C

A

E

B

D

B

E

D

B

C

D

C

D

B

Insert Arrangement

Service Rating

10-5

10-6

10-7

10-70

COAX

1

10-98

12-3

II

12-4

I

Number of Contacts

Contact Size

5

6

7

6

3

4

20

8 COAX

20

16

B

A

C

A

E

H

B

G

A

E

B

F

H

D

C

A

B

H

G

B

C

E

G

K

J

C

L

F

B

D

M

H

D

C

K

J

K

E

C

J

R

F

D

F

D

E

D

N

P

Insert Arrangement

Service Rating

12-8

12-10

12-14

12-98

14-2

II

14-4

14-5

II

I

Number of Contacts

Contact Size

8

10

20

14

20

10

20

2

4

5

20

12

16

A

L

A

M

A

E

A

D

H

A

L

A

B

N

K

L

H

B

D

N

J

L

P

M

K

M

N

B

G

B

K

C

D

B

J

V

U

T

U

F

K

R

J

T

P

C

R

M

C

G

C

S

R

D

H

D

P

F

H

D

J

S

F

C

F

E

G

E

H

G

E

D

C

G

F

E

Insert Arrangement

Service Rating

14-8

I

14-12

I

14-15

I

14-18

14-19

14-22

I

14-71

I

Number of Contacts

Contact Size

6

2

8

4

14

20

1

18

20

19

20

1

4

3

1

20

12

20

16

20

12

16

8 COAX

7

Amphenol Miniature Cylindrical

insert arrangements

A

P

R

S

A

N

Y

B

P

A

T

A

R

B

M

C

F

N

S

G

B

a

U

b

D

C

Z

L

D

H

X

T

M

c

F

C

Z

V

D

B

K

E

L

C

U

B

W

Y

W

E

X

J

V

K

C

E

D

F

H

G

J

G

H

Insert Arrangement

Service Rating

14-91HV

14-AA

I

16-8

II

16-23

I

16-26

I

Flashover

5,000 VAC (RMS)

Number of Contacts

Contact Size

3

4

8

22

20

1

26

20

12

16

A

R

A

B

P

B

K

H

P

S

T

C

L

N

J

B

C

G

U

P

Y

Z

D

N

J

M

F

X

V

D

C

H

M

E

R

W

L

K

M

G

E

F

K

D

E

L

G

J

F

H

Insert Arrangement

Service Rating

16-70

N/A

16-76

Flashover

16-99

I

18-2

II

18-3

II

1,500 VAC (RMS)

Number of Contacts

Contact Size

14

20

1

8

1

5

21

20

2

8

3

12 COAX

20

12*

2 COAX

16

10

*Contact Positions Optional

A

S

B

J

A

R

C

T

d

G

B

A

P

H

G

B

c

U

D

F

e

K

L

E

B

H

b

N

V

E

f

g

a

W

M

D

C

F

C

X

Z

Y

L

G

F

D

K

H

E

D

J

E

Insert Arrangement

Service Rating

18-5

II

18-8

18-11

II

18-30

I

Number of Contacts

Contact Size

5

8

11

29

20

1

12

16

T

A

S

H

B

R

U

K

A

e

L

V

C

J

P

f

J

B

d

W

D

A

B

G

C

D

j

N

g

P

M

C

X

c

E

C

M

h

H

Y

b

N

F

L

G

D

a

Z

F

D

G

K

F

E

H

J

Insert Arrangement

Service Rating

18-32

18-71

18-72

N/A

18-75

COAX

4

I

II, COAX

Number of Contacts

Contact Size

32

20

8

1

10

20

4

16

8 COAX

12 COAX

8 COAX

8

Amphenol Miniature Cylindrical

insert arrangements

L

S

A

N

K

A

B

A

F

M

H

B

D

C

J

R

P

G

C

E

B

C

D

H

F

D

G

E

D

C

E

F

Insert Arrangement

Service Rating

18-76

II

18-80

18-91 HV

Flashover

20-16

II

I, COAX

5,000 VAC (RMS)

Number of Contacts

Contact Size

3

1

6

2

6

16

12 COAX

8 COAX

20

8 COAX

20

A

R

B

U

A

L

A

M

V

P

X

S

C

a

C

S

T

B

S

C

N

D

W

K

N

B

X

R

D

b

Y

a

Z

D

a

c

W

b

T

E

W

M

a

Y

M

L

V

P

d

c

P

E

b

Z

J

C

Y

U

N

F

Z

X

J

L

U

Z

V

F

H

U

F

R

E

M

G

X

V

D

L

H

K

G

T

S

W

H

Y

K

G

K

H

J

F

Insert Arrangement

Service Rating

20-24

20-25

20-26

I

20-27

I

Number of Contacts

Contact Size

24

20

25

20

6

27

20

12

A

B

W

K

A

W

C

V

X

k

B

L

U

V

i

J

B

X

j

D

Y

j

Y

C

a

A

T

U

k

i

E

Z

s

m

M

D

P

S

m

r

T

h

g

G

B

h

t

a

F

E

r

n

R

S

G

g

b

F

b

q

n

d

p

q

e

P

R

H

C

H

F

C

f

c

f

E

D

G

N

P

G

D

d

e

L

J

N

H

M

N

F

E

K

J

M

K

L

Insert Arrangement

Service Rating

20-39

I

20-41

20-70

COAX

20-90

I

HI-VOLTAGE

Number of Contacts

Contact Size

37

20

2

41

20

10

4

7

16

20

8 COAX

20

A

P

N

A

N

R

Z

P

j

N

B

b

R

M

B

F

E

B

P

X

B

M

Z

Y

S

a

C

M

K

c

S

h

W

R

L

G

D

C

L

C

T

X

g

d

T

a

b

L

D

C

K

D

V

S

K

D

e

f

W

U

Y

U

V

E

U

T

J

E

X

V

W

J

F

H

F

G

H

G

Insert Arrangement

Service Rating

22-7

COAX

7

22-21

II

22-25

22-32

I

Number of Contacts

Contact Size

21

25

16

32

20

8 COAX

16

9

Amphenol Miniature Cylindrical

insert arrangements

A

V

p

U

A

T

A

T

Y

B

T

B

S

B

V

Z

S

C

S

B

X

C

n

U

W

U

a

n

k

R

e

f

C

V

m

X

W

D

AA

d

C

k

Y

Z

a

m

q

R

j

b

D

g

n

R

BB

e

V

m

l

P

z

y

r

s

h

W

X

E

D

CC

GG

FF

c

k

W

f

t

q

f

c

j

i

HH

EE

P

i

E

F

l

P

D

U

s

F

N

DD

p

r

E

d

j

N

b

t

X

g

T

j

E

h

d

G

b

x

M

u

g

h

Z

k

e

F

h

c

S

w

v

c

Y

H

M

Y

a

F

g

M

d

G

b

Z

R

L

G

a

f

J

e

L

H

G

P

K

J

H

K

N

L

H

J

M

Insert Arrangement

Service Rating

22-34

22-36

22-41

I

22-55

I

Number of Contacts

Contact Size

34

20

36

20

27

20

14

16

55

20

A

V

F

H

J

M

B

K

B

F

B

F

B

C

S

L

T

J

C

U

N

G

L

C

E

G

V

U

P

M

K

T

D

P

R

N

J

H

D

S

R

E

G

E

C

H

F

G

D

Insert Arrangement

Service Rating

22-70

22-71

I, COAX

22-72

N/A

4

22-78

COAX

7

i, COAX

Number of Contacts

Contact Size

12

20

6

2

7

12

20

3

8 COAX

20

8 COAX

16

8 COAX

a

A

M

A

B

Z

B

d

b

a

L

N

B

C

c

Y

b

C

e

A

v

c

u

D

E

Z

P

X

D

w

t

d

AA

HH

Y

X

a

g

Q

C

R

D

F

E

B

C

W

GG

FF

x

e

s

y

W

v

E

K

f

b

c

NN

JJ

s

f

F

f

DD

BB

z

V

PP

LL

r

y

V

G

F

MM

KK

r

J

e

g

G

g

EE

CC

z

U

q

W

H

d

S

G

q

w

L

x

h

H

J

DD

AA

V

T

F

T

p

T

H

p

U

E

i

CC

BB

n

S

j

n

j

J

G

m

k

K

R

K

D

P

L

M

N

M

Insert Arrangement

Service Rating

22-96

24-31

24-51

I

24-61

II

7

I

Number of Contacts

Contact Size

31

16

47

20

4

61

20

12 for #10 WIRE

12 COAX

a

A

Z

B

Y

r

Contact Legend

F

t

b

C

s

c

X

z

D

Symbol

Contact Size

W

y

u

d

D

A

AA

BB

E

20

q

e

V

F

p

f

16

12

U

n

g

G

E

C

B

T

m

h

x

k

v

i

w

H

S

j

J

R

K

P

L

N

HV

M

Insert Arrangement

Service Rating

24-71

N/A

2

24-79

COAX

12 COAX

Number of Contacts

Contact Size

45

20

2

1

1₈0_C⁵_OAX

8 COAX

16

8 COAX

20

Amphenol PT, SP, MS/PT

Proprietary/MIL-DTL-26482, Series 1

bayonet coupling and solder termination

Amphenol® solder contact miniature cylindrical connectors meet the

most critical application needs. Design versatility combined with high

reliability performance makes these series of Miniature Cylindrical

Connectors ideal for environmental sealing or pressurized applications.

wall mounting

receptacle

TheꢀMS/PTꢀSeriesꢀisꢀqualiﬁedꢀtoꢀMIL-DTL-26482,ꢀSeriesꢀ1ꢀandꢀhasꢀallꢀtheꢀoutstandingꢀ

designꢀcharacteristicsꢀandꢀqualityꢀofꢀtheꢀPTꢀSeries.ꢀTheꢀSPꢀSeriesꢀisꢀaꢀmodiﬁcationꢀ

ofꢀtheꢀPT,ꢀprovidingꢀspecialꢀshellsꢀwithꢀaꢀwideꢀmountingꢀﬂangeꢀforꢀbackꢀpanelꢀ

mounting.

Aꢀcorrosionꢀresistantꢀelectricallyꢀconductiveꢀﬁnishꢀofꢀcadmiumꢀplateꢀwithꢀanꢀoliveꢀ

drab chromate after-treatment is used on the PT and MS/PT. The SP is given a

durable non-conductive hard anodic “Alumilite”® coating which provides abrasion

protection and resistance to corrosion.

cable

connecting

receptacle*

**NEW** 500 hour corrosion resistance, RoHS compliant harsh environment

conductive plating. Gray Zinc over an Electroless Nickel (Gray ZnNi) base, with a Light

Gun Metal Gray appearance.

Shell components for these series are aluminum. The dependable 5 key/keyway

polarizationꢀwithꢀbayonetꢀlockꢀcouplingꢀassuresꢀpositiveꢀmatingꢀwithꢀnoꢀchanceꢀ

of cross plugging. Spring tension provided by a wave washer in the coupling nut

ensures maintenance of interfacial seal between mating halves.

box mounting

receptacle

Both the insert and main joint gasket are molded from resilient neoprene. This

provides excellent moisture sealing at the gasket and superior electrical isolation of

the contact in the insert.

Both pins and sockets are machined from a copper alloy and are gold plated.

Thisꢀgoldꢀplatingꢀeliminatesꢀcontactꢀcorrosionꢀandꢀoﬀersꢀanꢀindeﬁniteꢀshelfꢀlife.ꢀ

Socket contacts for these series are a closed entry design. A breakaway style plug is

available in the PT solder series. Hermetics receptacles are available in PT and MS/

PT solder series. Receptacles with printed circuit board contacts are also available.

straight plug

PTꢀSolderꢀisꢀULꢀrecognizedꢀunderꢀﬁleꢀ#E115497,ꢀVol.ꢀ1,ꢀSec.ꢀ5.ꢀTheꢀPT,ꢀSPꢀandꢀMS/PTꢀ

Series are intermateable and intermountable with all existing Miniature Cylindrical

Series connectors.

Refer to pages 4-10 for insert arrangement availability.

PT, SP, MS/PT

Table 1: CONTACT DATA/CONNECTOR RATINGS

Contact Speciﬁcations

Contact Test Cur-

Maximum Millivolt

Solder Well

Diameter

Solder Well

Depth

jam nut

receptacle

Size

rent

Drop†

+.004

.046

+.031

.125

20

7.5

55

50

-.000

+.005

.078

+.031

.188

16

12

13.0

23.0

-.003

-.000

+.004

-.002

+.031

-.000

42

.116

.188

† Silver plated wire

per MIL-DTL-26482

Service Rating

* This connector

style is sometimes

referred to as a

cable connecting

“plug.” It does,

however, mate

with a straight or

90 degree plug.

Recommended

Operating

AC Voltage at Sea

Level

Test Voltage AC (RMS), 60 cps

thru bulkhead

receptacle

Service

Rating

Sea

110,000

50,000 ft. 70,000 ft.

Level

ft.

I

600

1,500

2,300

500

750

375

500

200

II

1,000

11

Amphenol PT, SP, MS/PT

Proprietary/MIL-DTL-26482, Series 1

bayonet coupling and solder termination, cont.

PT, SP Service Classes

PT and SP connectors are available in the service classes listed below.

Eachꢀclass,ꢀwithꢀtheꢀexceptionꢀofꢀhermetic,ꢀoﬀersꢀoneꢀorꢀmoreꢀmeansꢀofꢀ

terminating or supporting a cable or wire bundle.

“A” general

duty

“A”ꢀꢀ

Generalꢀduty;ꢀbackꢀshellꢀisꢀthreadedꢀforꢀconduit

attachment of MS3057 cable clamp

“A” (SR) General duty, with strain relief clamp for cable

or wire bundle support

“C”ꢀꢀ

Pressurizedꢀreceptacle;ꢀlessꢀthanꢀ1ꢀcu.ꢀin.ꢀper

hour leakage at 30 psi over a temperature

range of –65°F to +257°F

Environmental resistant connectors - supplied

with a multi-holed grommet and clamping

nutꢀforꢀmoisture-prooﬁngꢀindividualꢀopen

wires

“E”

“E” (SR),

MS/”F”

strain relief

ꢀ

“E” (SR) Environmental resistant strain relief clamp

ꢀ

andꢀgrommetꢀforꢀmoistureꢀprooﬁngꢀindividual

wires;ꢀprovidesꢀaddedꢀwireꢀbundleꢀsupport

Translucent nylon boot for retaining customer-

appliedꢀpottingꢀcompounds;ꢀheldꢀin

“P”

ꢀ

place by a threaded ring

“E”,

“P” (SR) Strain relief clamp suitable for retaining customer

applied potting compounds, with provision

for wire support

MS/”E”

open wire seal

“PG”ꢀꢀ Compressingꢀcableꢀglandꢀforꢀmoistureꢀprooﬁng

jacketed cables.

“H”*

Hermetically sealed with compression glass

inserts (see pages 22-25)

Style with printed circuit board contacts- see page 20.

“P”

MS/PT Service Classes

MS/ “P”

potting boot

TheꢀMS/PTꢀMiniatureꢀconnectorꢀisꢀavailableꢀinꢀtheꢀfollowingꢀcertiﬁedꢀ

service classes:

“E”

Environmental resistant connectors - supplied

with a multi-holed grommet and clamping

nutꢀforꢀmoisture-prooﬁngꢀindividualꢀopenꢀwires

Grommet seal with strain relief clamp

Compressing clamp and neoprene gland for

moistureꢀprooﬁngꢀmulti-conductorꢀjacketed

cable and strain relief. Telescoping sleeves

(MS 3420A) can be used to adapt to cables

smaller than minimum close-down.

ꢀ

“F”

“J”

ꢀ

“PG”

cable gland

seal

“P”

ꢀ

Translucent nylon boot for retaining customer-

appliedꢀpottingꢀcompounds;ꢀheldꢀin

place by a threaded ring

12

PT00 (MS3110)

SP00

wall mounting receptacle

S

L

PT

.120 .00ꢀ ꢁDi.

(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄz 24)

R

Q

M

(TP)

SP

.1ꢀ0 .00ꢀ ꢁDi.

“PG” Cable Gland Seal

4 Holzꢃ

R

S

A

(TP)

K

Z

TERMINATION ASSEMBLIES

“E” Open Wire Seal “P” Potting Boot

“A” General Duty/

“C”ꢀPressurized“

“A” (SR), “E” (SR), “P” (SR),

MS / “F” Strain Relief

PT00PG-XX-XXX

L

V

G D H

N

D

N

D

“J” Cable Seal

XL

C

.375 MIN

PT00A-XX-XXX

SP00A-XX-XXX

PT00C-XX-XXX

PT00A-XX-XXX (SR)

SP00A-XX-XXX (SR)

PT00E-XX-XXX (SR)

SP00E-XX-XXX (SR)

PT00P-XX-XXX (SR)

SP00P-XX-XXX (SR)

MS3110F-XX-XXX

PT00E-XX-XXX

SP00E-XX-XXX

MS3110E-XX-XXX

PT00P-XX-XXX

SP00P-XX-XXX

MS3110P-XX-XXX

N

D

MS3110J-XX-XXX

To complete part number see how to order on page 25.

■ (MMC) located within .0025 of (TP)

Receptacle Front View

Receptacle Side View

Class “A”, “C”

Shell

Size

R

(TP)

S

Max.

K +.020

-.010

M +.010

-.000

Z

Max.

A

+.001

-.005

Q

V

L

Max.

N

Max.

L Max.

Thread

Class 2A

D Min.

Thread

Class A

PT

SP

PT

SP

PT

SP

PT

SP

PT SP

6

.469

.594

.719

.812

.906

.641

.734

.812

.938

.688

.812

.938

.953

1.047

1.125

.348

.473

.590

.750

.875

.493

.524

.906

.431 .462

.3125-32 NEF

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8125-20 UNEF

.468 .438

.175

.297

.421

.546

.663

1.553

.462

.590

.717

.834

.970

.3750-32 NEF

.5000-28 UNEF

.6250-24 NEF

.7500-20 UNEF

.8750-20 UNEF

8

10

12

14

1.031 1.250

1.031 1.125 1.344

16

18

20

22

24

.969

1.125 1.219 1.438 1.000 .493

.524

.906

.431 .462

.9375-20 UNEF

1.0625-18 NEF

1.1875-18 NEF

1.3125-18 NEF

1.4375-18 NEF

.468 .438

.531 .438

.531 .531 1.014 1.703

.531 .531 1.134 1.703

.498 .498 1.259 1.765

.787

.879

1.553

1.088

1.216

1.332

1.460

1.585

1.0000-20 UNEF

1.1875-18 NEF

1.4375-18 NEF

1.062 1.203 1.312 1.516 1.125 .493

1.156 1.297 1.438 1.672 1.250 .650

1.250 1.375 1.562 1.750 1.375 .650

1.375 1.500 1.688 1.875 1.500 .650

.650 1.125 .556 .556

.650 1.125 .589 .556

Class “e”,

MS/”E”

Class “A” (SR), “E” (SR), “P” (SR), MS/”F”

Class “P”, MS/”P”

Class “J”

D

Class “PG”

Shell

Size

C

D

G

H

L

N

L

N

D

L

N

XL

B

L

Thread

Min. Max. Max.

Max.

Min.

Max. Max.

Max.

Thread

Max.

Closed

Free

6

8

10

12

14

16

18

20

22

24

-

1.266

.440

.560

.685

.813

.930

.192 1.438 .484

.317 1.438 .608

.434 1.438 .734

.548 1.438 .858

.673 1.438 .984

-

6-32

8-32

.240

.302

.428

.552

.615

.740

.928

.990

.125

.188

.312

.375

.500

.625

.750

.800

.812

.875

1.000 1.922

1.125 1.922

1.922

.550

.675

.803

.920

.168

.205

.338

.416

.550

.600

.635

.670

.740

.230

.312

.442

.539

.616

.672

.747

.846

.894

.547

.675

.812

.940

1.067

1.194

1.322

1.449

1.576

2.271

2.411

2.599

2.943

3.172

3.610

3.766

3.985

M12x1.5-6H

M16x1.5-6H

M18x1.5-6H

M22x1.5-6H

M25x1.5-6H

M32x1.5-6H

.936

1.180

1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110

1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234

1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360

1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484

1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610

All dimensions for reference only.

13

PT01 (MS3111)

cable connecting receptacle

L

“PG” Cable Gland Seal

S

M

Q

Y

S

A

K

Z

TERMINATION ASSEMBLIES

“A” General Duty

“A” (SR), “E” (SR), “P” (SR),

MS / “F” Strain Relief

“E” Open Wire Seal

“P” Potting Boot

PT01PG-XX-XXX

L

V

“J” Cable Seal

N

D

G D H

N

D

N

XL

C

.375 MIN

PT01A-XX-XXX (SR)

PT01E-XX-XXX (SR)

PT01P-XX-XXX (SR)

MS3111F-XX-XXX

PT01E-XX-XXX

MS3111E-XX-XXX

PT01P-XX-XXX

MS3111P-XX-XXXX

PT01A-XX-XXX

N

D

Note: This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

To complete part number see how to order on page 25.

MS3116J-XX-XXX

Receptacle

Receptacle Side View

Front View

Class “A”, “C”

Shell

Size

K

+.020

-.010

M

+.016

-.000

A

+.001

-.005

Q

V

S

.020

Y

.020

Z

Max.

D

Min.

L

Max.

N

Max.

L Max.

Thread

Class 2A

Thread

Class A

6

.688

.812

.938

.812

.938

.348

.473

.590

.750

.875

.494

.650

.683

.906

1.125

1.188

.400

.535

.568

.3125-32 NEF

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8125-20 UNEF

.9375-20 UNEF

1.0625-18 NEF

1.1875-18 NEF

1.3125-18 NEF

1.4375-18 NEF

.948

1.166

.175

.297

.421

.546

.663

.787

.879

1.553

1,553

1.553

.462

.590

.3750-32 NEF

.5000-28 UNEF

.6250-24 NEF

.8750-20 UNEF

1.0000-20 UNEF

1.1875-18 NEF

1.4375-18 NEF

8

10

12

14

16

18

20

22

24

1.062

.717

1.031 1.156

1.125 1.250

.834

.970

1.219 1.344 1.000

1.312 1.438 1.125

1.438 1.562 1.250

1.562 1.688 1.375

1.688 1.812 1.500

1.088

1.216

1.332

1.460

1.585

1.041 1.703

1.135 1.703

1.259 1.703

Class “e”,

MS/”E”

Class “A” (SR), “E” (SR), “P” (SR), MS/”F”

Class “P”, MS/”P”

Class “J”

Class “PG”

Shell

Size

D

C

D

G

H

L

N

L

N

D

L

N

XL

B

L

Thread

Min. Max. Max.

Max.

Min.

Max. Max.

Max.

Thread

Max.

Closed

-

Free

-

6

-

1.266

.440

.560

.685

.813

.930

.192 1.438 .484

.317 1.438 .608

.434 1.438 .734

.548 1.438 .548

.673 1.438 .673

-

8

6-32

8-32

.240

.302

.428

.552

.615

.740

.928

.990

.125

.188

.312

.375

.500

.625

.750

.800

.812

.875

1.922

.550

.675

.803

.920

.168

.205

.338

.416

.550

.600

.635

.670

.740

.230

.312

.442

.539

.616

.672

.747

.846

.894

.547

2.271

2.411

2.599

2.943

3.172

3.610

3.766

3.985

.936

1.180

M12x1.5-6H

M16x1.5-6H

M18x1.5-6H

M22x1.5-6H

M25x1.5-6H

M32x1.5-6H

10

12

14

16

18

20

22

24

.675

1.000 1.922

1.125 1.922

.812

.940

1.188 2,047 1.047 1.266 1.057 .798 1.438 .798

1.438 2.078 1.165 1.266 1.175 .899 1.438 .899

1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.024

1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.149

1.719 2.406 1.543 1.516 1.555 1.274 1.717 1.274

1.067

1.194

1.322

1.449

1.576

All dimensions for reference only.

14

PT02 (MS3112)

SP02

box mounting receptacle

S

R

(TP)

L

PT

.120 .00ꢀ ꢁDi.

(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄz 24)

M

SP

.1ꢀ0 .00ꢀ ꢁDi.

4 Holzꢃ

R

(TP)

S

A

N

K

Z

PT02A-XX-XXX

SP02A-XX-XXX

* PT02C-XX-XXX

* SP02C-XX-XXX

* PT02E-XX-XXX

* SP02E-XX-XXX

MS3112E-XX-XXX

* PT02P-XX-XXX

* SP02P-XX-XXX

MS3112P-XX-XXX

To complete part number see how to order on page 25.

■ (MMC) located within .0025 of (TP)

*ꢀTheꢀPT02ꢀandꢀSP02ꢀboxꢀmountingꢀreceptaclesꢀareꢀmadeꢀonlyꢀtoꢀcompleteꢀaꢀseries;

no provision is made for accessories or potting on the rear skirt.

Receptacle Front View

Receptacle Side View

K

+.020

-.010

M

+.031

-.000

Shell

Size

R

(TP)

Z

Max.

A

+.001

-.005

N

Dia.

Max.

S

L Max.

PT

SP

PT

SP

PT

SP

PT

SP

PT

SP

6

.469

.641

.688

.953

.348

.473

.493

.650

.683

.524

.650

.683

.825

1.076

1.109

.431

.556

.589

.462

.556

.589

.323

.449

.465

.526

.493

.438

.531

.497

8

.594

.734

.812

1.047

1.125

1.250

1.344

1.438

1.516

1.672

1.750

1.875

10

12

14

16

18

20

22

24

.719

.812

.938

.590

.573

.812

.938

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.699

.906

1.031

1.125

1.219

1.312

1.438

1.562

.875

.823

.969

1.000

1.125

1.250

1.375

1.500

.949

1.062

1.156

1.250

1.375

1.073

1.199

1.323

1.449

All dimensions for reference only.

15

PT06 (MS3116)

S

SP06

straight plug

“PG” Cable Gland Seal

TERMINATION ASSEMBLIES

“A” General Duty

“A” (SR), “E” (SR), “P” (SR),

MS / “F” Strain Relief

“E” Open Wire Seal

“P” Potting Boot

L

V

PT06PG-XX-XXX

N

D

G D H

N

D

N

“J” Cable Seal

C

.375 MIN

PT06A-XX-XXX

PT06A-XX-XXX (SR)

SP06A-XX-XXX (SR)

PTG06A-XX-XXX (SR)

PT06E-XX-XXX (SR)

SP06E-XX-XXX (SR)

PTG06E-XX-XXX (SR)

PT06P-XX-XXX (SR)

SP06P-XX-XXX (SR)

PTG06P-XX-XXX (SR)

MS3116F-XX-XXX

PT06E-XX-XXX

SP06E-XX-XXX

PTG06E-XX-XXX

MS3116E-XX-XXX

PT06P-XX-XXX

SP06P-XX-XXX

PTG06P-XX-XXX

MS3116P-XX-XXX

XL

SP06A-XX-XXX

PTG06A-XX-XXX

N

D

MS3116J-XX-XXX

To complete part number see how to order on page 25.

Plug Front View

Plug Side View

Class “A”

Shell

Size

S

Max.

L

Max.

Q Thread

Class 2A

Z

Max.

D

L

Max.

N

Max.

V Thread

Class A

J

Min.

.175

.297

.421

.546

.663

.787

.879

1.014

1.135

1.259

6

8

.625

.750

.353

.415

.906

.3125-32 NEF

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8125-20 UNEF

.9375-20 UNEF

1.0625-18 NEF

1.1875-18 NEF

1.3125-18 NEF

1.4375-18 NEF

.594

.672

1.609

1.656

1.750

.462

.590

1.4375-18 NEF

.5000-28 UNEF

.6250-24 NEF

10

12

14

16

18

20

22

24*

.859

.906

.717

1.013

1.156

1.281

1.391

1.531

1.656

1.776

.906

.834

.7500-20 UNEF

.8750-20 UNEF

1.0000-20 UNEF

1.1875-18 NEF

1.4375-18 NEF

.906

.970

.906

1.088

1.216

1.332

1.460

1.587

.906

1.062

1.125

Class “e”,

MS/”E”

Class “A” (SR), “E” (SR), “P” (SR), MS/”F”

Class “P”, MS/”P”

Class “J”

Class “PG”

Shell

Size

D

C

D

G

H

L

N

L

N

D

L

N

XL

B

L

Thread

Min. Max. Max.

Max.

Min.

Max. Max.

Max.

Thread

Max.

Closed

Free

-

6

-

1.266

.440

.560

.685

.813

.930

.192 1.438 .484

.317 1.438 .608

.434 1.438 .734

.548 1.438 .858

.673 1.438 .984

-

8

6-32

8-32

.240

.302

.428

.552

.615

.740

.928

.990

.125

.188

.312

.375

.500

.625

.750

.800

.812

.875

1.922

.550

.675

.803

.920

.168

.205

.338

.416

.550

.600

.635

.670

.740

.230

.312

.442

.539

.616

.672

.747

.846

.894

.547

2.271

2.411

2.599

2.943

3.172

3.610

3.766

3.985

.936

1.180

M12x1.5-6H

M16x1.5-6H

M18x1.5-6H

M22x1.5-6H

M25x1.5-6H

M32x1.5-6H

10

12

14

16

18

20

22

24

.675

1.000 1.922

1.125 1.922

.812

.940

1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110

1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234

1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360

1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484

1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610

16

1.067

1.194

1.322

1.449

1.576

All dimensions for reference only.

PT07 (MS3114)

SP07

jam nut receptacle

S

H

M

Z

“A” General Duty/

“C”ꢀPressurizedꢀReceptacle

PT07A-XX-XXX

S

A

J

PT07C-XX-XXX

R

P

TERMINATION ASSEMBLIES

K

“A” (SR), “E” (SR), “P” (SR),

MS / “F” Strain Relief

“E” Open Wire Seal

“P” Potting Boot

M

Z

M

Z

M

Z

N

G D H

D N

A

J

C

L

R

P

L

P

L

PT07E-XX-XXX

SP07E-XX-XXX

MS3114E-XX-XXX

PT07A-XX-XXX (SR)

SP07A-XX-XXX (SR)

PT07E-XX-XXX (SR)

MS3114F-XX-XXX

PT07P-XX-XXX

MS3114P-XX-XXX

To complete part number see how to order on page 25.

Recept. Front View

Shell

Receptacle Side View

Panel Thickness

Class “E”, MS/”E”

A Dia.

+.001

-.005

J Flat

+.000

-.010

K

+.011

-.010

R Thread

Class 2A

UNEF

H

Z

Max.

L

Max.

N

Z

.0ꢀ0

Size

S

M

.016

Max.

Min.

Max.

6

.625

.750

.812

.938

.348

.473

.405

.530

.125

.156

.696

.884

.917

.062

.125

.250

.4375-28

.5625-24

.6875-24

.8750-20

.231

.261

.228

.568

.630

.660

.696

.884

.917

.604

.729

.191

.221

.188

8

10

12

14

16

18

20

22

24

.875

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

.590

.655

.854

1.062

1.188

1.312

1.438

1.562

1.688

1.816

.750

.818

.979

.875

.942

1.0000-20

1.1250-18

1.2500-18

1.3750-18

1.5000-18

1.6250-18

1.104

1.229

1.354

1.510

1.635

1.760

1.000

1.125

1.250

1.375

1.500

1.066

1.191

1.316

1.441

1.566

Class “A” (SR), “E” (SR), “P” (SR), MS/”F”

Class “E” (SR)

Class “P”, MS/”P”

Shell

Size

C

D

L +.010

D Max.

G

H

L

M

G

H

L

M

N

Z

Thread

Max.

.202

.327

.444

.558

.683

.808

.909

1.034

1.159

1.284

-.026

.593

.718

6

-

.696

.884

.917

.484

.608

.734

.858

.984

.191

8

6-32

8-32

.250

.312

.438

.562

.625

.750

.938

1.000

.125

.188

.312

.375

.500

.625

.750

.800

.781

.844

.969

1.062

.696

.884

.917

6-32

8-32

.250

.312

.438

.562

.625

.750

.938

.125

.188

.312

.775 1.029 .696

.837 1.029 .696

.963 1.029 .696

.191

10

12

14

16

18

20

22

24

1.094 1.062

1.156 1.188

1.406 1.188

1.406 1.250

1.594 1.250

.375 1.087 1.029 .696

.500 1.150 1.161 .696

.625 1.400 1.161 .696

.625 1.400 1.224 .884

.750 1.587 1.224 .884

1.110 .191

1.234 .191

1.360 .221

1.484 .221

1.610 .188

1.000 .800 1.681 1.320 .917

17

*Sizeꢀ24ꢀstrainꢀreliefꢀavailableꢀinꢀPTꢀonlyꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ

ꢀ

ꢀꢀꢀꢀꢀꢀꢀAllꢀdimensionsꢀforꢀreferenceꢀonly.

PT08 E

G

SP08 E

90 degree plug

“E” Open Wire Seal, “E” (SR)

TERMINATION ASSEMBLIES

“P” Potting Boot 75 degrees

Strain Relief

L

E

A

K

B

H

PT08E-XX-XXX

PT08P-XX-XXX

SP08P-XX-XXX

SP08E-XX-XXX

D

PT08E-XX-XXX (SR)

SP08E-XX-XXX (SR)

C

To complete part number see how to order on page 25.

All lockwire holes are .044 Dia. Min.

Plug

Front

View

Plug Side View

Shell

Size

Class “E”, “E” (SR)

Class “P”

G

Dia.

Max

C

+.010

-.025

E

+.0ꢀ7

-.025

B

.031

D

.062

L

.057

A

.025

H

.015

K

.015

L

Max.

8

.796

.921

.655

.749

.169

.170

.264

.310

.330

.444

.510

.515

.656

.941

.339

.393

.450

.519

.583

.621

.683

.739

.797

1.786

1.880

1.965

2.113

2.315

2.423

2.695

2.742

2.980

.469

.547

.625

.734

.750

.781

.859

.906

1.169

.312

.438

.516

.625

.656

.703

.766

.812

.918

.438

.562

1.656

1.781

1.843

1.953

2.000

2.046

2.218

2.265

2.624

10

12

14

16

18

20

22

24

1.191

1.254

1.316

1.562

1.625

1.719

1.751

1.046

1.171

1.297

1.422

1.562

1.672

1.797

.812

.688

.905

.781

1.030

1.015

1.077

1.139

1.265

.890

1.000

1.125

1.234

1.374

All dimensions for reference only.

18

PT Connectors with

Printed Circuit Board Contacts

Box Mounting Receptacle (PT02)

S

R

(TP)

L

PT

with PCB Contacts

.120 .00ꢀ ꢁDi.

(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄz 24)

M

Orderꢀbyꢀapplicableꢀpartꢀnumberꢀinꢀchartꢀbelow;

SP

add insert arrangement number. Refer to insert availability

on pages 4-10.

.1ꢀ0 .00ꢀ ꢁDi.

4 Holzꢃ

R

(TP)

■ (MMC) located within .0025 of (TP)

S

A

N

K

Z

Receptacle Front View

Receptacle Side View

Part Number*

PT02 with PCB

Contacts

Shell

Size

S

A

+.001

-.005

K

+.021

-.010

M

N

Dia.

Max.

Z

+.0ꢀ0

-.050

R

L

+.011

(TP)

-.010

+.031

Max.

-.000

6

71-570120-XXX

71-570121-XXX

71-570122-XXX

71-570123-XXX

71-570124-XXX

71-570125-XXX

71-570126-XXX

71-570127-XXX

71-570128-XXX

71-570129-XXX

.469

.594

.688

.812

.348

.473

.493

.650

.683

.825

1.076

1.109

.431

.556

.589

.323

.380

.286

.253

8

.449

10

12

14

16

18

20

22

24

.719

.938

.590

.573

.812

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.699

.906

.875

.823

.969

1.000

1.125

1.250

1.375

1.500

.949

1.062

1.156

1.250

1.375

1.073

1.199

1.323

1.449

All dimensions for reference only.

S

H

M

Jam Nut Receptacle (PT07)

with PCB Contacts

Z

All lockwire holes are .044 Dia. Min.

Orderꢀbyꢀapplicableꢀpartꢀnumberꢀinꢀchartꢀbelow;

add insert arrangement number. Refer to insert availability

on pages 4-10.

S

A

J

R

P

K

Receptacle Front View

Receptacle Side View

P Panel

Part Number*

Shell

Size

H

+.017

-.016

A Dia.

+.001

-.005

J Flat

+.000

-.010

K

+.011

-.010

R

Z

+.025

-.035

PT02 with PCB

Contacts

S

.010

M

Thickness

Min. Max.

.062 .125

Thread

Class 2A

.010

6

71-533720-XXX

71-533721-XXX

71-533722-XXX

71-533723-XXX

71-533724-XXX

71-533725-XXX

71-533726-XXX

71-533727-XXX

71-533728-XXX

71-533729-XXX

.625

.750

.812

.938

.348

.473

.405

.530

.125

.156

.696

.884

.917

.4375-28 UNEF

.5625-24 UNEF

.6875-24 UNEF

.8750-20 UNEF

.376

.367

.334

8

.062

.125

.250

10

12

14

16

18

20

22

24

.875

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

.590

.655

1.062

1.188

1.312

1.438

1.562

1.688

1.816

.750

.818

.875

.942

1.0000-20 UNEF

1.1250-18 UNEF

1.2500-18 UNEF

1.3750-18 UNEF

1.5000-18 UNEF

1.6250-18 UNEF

1.000

1.125

1.250

1.375

1.500

1.066

1.191

1.316

1.441

1.556

All dimensions for reference only.

* For RoHS compliance connectors with PCB contacts change “71”- to:

“FL”ꢀdesignatesꢀconductiveꢀgrayꢀzincꢀnickelꢀplating

“93”ꢀdesignatesꢀblackꢀzincꢀcobaltꢀplating

19

PTB

SPB

thru bulkhead receptacle

L

S

M

PTB

.120 .00ꢀ ꢁDi.

(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄz 24)

R

P

(TP)

SPB

.1ꢀ0 .00ꢀ ꢁDi.

4 Holzꢃ

R

S

A

(TP)

K

* PTB-XX-XXX

* SPB-XX-XXX

* To complete part number add desired arrangement number (refer to pages 4 and 5 for insert

availability)ꢀandꢀaddꢀ“PS”;

Example: PTB-18-32PS. If a rotation is required, use PTB-18-32PS and add W, X, Y or Z. Example:

PTB-18-32 PSW.

The socket end of the insert always appears at the “P” dimension end of shell.

■(MMC) located within .0025 of (TP)

Receptacle Front View

Receptacle Side View

Shell

Size

R

(TP)

P

Max.

S

A

+.001

-.005

K

+.016

-.000

M

+.010

-.000

L

.005

PTB

SPB

PTB

SPB

PTB

SPB

6

.469

.594

.641

.734

.688

.812

.953

.348

.473

.625

.781

1.050

1.330

.562

.688

.125

.188

.312

8

1.047

1.125

1.250

1.344

1.438

1.516

1.672

1.750

1.875

10

12

14

16

18

20

22

24

.719

.812

.938

.590

.812

.938

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.906

1.031

1.125

1.203

1.297

1.375

1.500

.875

.969

1.000

1.125

1.250

1.375

1.500

1.062

1.156

1.250

1.375

All dimensions for reference only.

20

PT

hermetic

Three shell styles are available in the hermetic PT

bayonet series:

• PTIH (MS3113H)

• PT02H

solder

mounting

receptacle

• PT07H (MS3114H)

These hermetic connectors are only available with solder cup or

ﬂatꢀeyeletꢀpinꢀcontactsꢀinꢀtheꢀMS/PTꢀversion.ꢀSocketꢀcontacts

are available in some proprietary PT versions. Other design

characteristics of the PT hermetic connector series are as

follows:

Shellꢀsizes:ꢀ8ꢀthroughꢀ24ꢀ(tinꢀplated)

Contact count: 2 through 61. Refer to pages 4 and 5 for insert

availability for hermetics.

Current:ꢀꢀ5.0ꢀampꢀeachꢀ#20ꢀcontact

ꢀ

10ꢀampꢀeachꢀ#16ꢀcontact

17ꢀampꢀeachꢀ#12ꢀcontact

ContactsꢀareꢀtinꢀplatedꢀforꢀPT;ꢀgoldꢀisꢀoptional

DielectricꢀWithstandingꢀVoltageꢀ(seaꢀlevel):

1500 volts (RMS) 60 cps, Service Rating I

2300 volts (RMS) 60 cps, Service Rating II

box mounting

receptacle

Compression glass inserts, permanently lettered

Helium Leakage: Less than 1.0 X 10-6 cc/sec.

ꢀ

atꢀ15ꢀpsiꢀdiﬀerential

Physical Shock: 100 G’s

Vibration:ꢀꢀ

ExceedsꢀMIL-E-5272ꢀProcedureꢀII

Thermal Shock:

No deterioration or failure after 5 cycles

at –55°F to +257°F

Intermateability: Mates with MS3116 and PT06

Refer to pages 4-10 for insert arrangement availability.

jam nut

receptacle

21

PTIH (MS3113H)

hermetic solder mounting receptacle

L

W

G

A

N

.031 +.006

–.005

Z

* PTIH-XX-XXX

** PTIY-XX-XXX

** MS3113H-XXCXXX

† PTIH-XX-XXX (100)

†† PTIY-XX-XXX (100)

†† MS3113H-XXYXXX

To complete part number see how to order on page 25.

* Solder cup pin contacts without interfacial seal

** Solder cup pin contacts with interfacial seal

† Flat eyelet pin contacts without interfacial seal

†† Flat eyelet pin contacts with interfacial seal

Recept.

Front View

Receptacle Side View

N Dia.

Shell Size

A Dia.

+.001

-.005

L

W

G Dia.

Max.

Z

+.025

-.016

+.001

-.005

+.001

-.010

Max.

6

.511

.636

.348

.473

.447

.509

.542

.438

.562

.094

.125

.386

.418

8

10

12

14

16

18

20

22

24

.761

.590

.672

.855

.750

.781

.980

.875

.906

1.105

1.229

1.323

1.449

1.574

1.000

1.125

1.250

1.375

1.500

1.031

1.156

1.250

1.375

1.500

All dimensions for reference only.

22

PT02H

hermetic box mounting receptacle

PT

S

.120 .00ꢀ ꢁDi.

R

L

W

(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄz 24)

(TP)

SP

.1ꢀ0 .00ꢀ ꢁDi.

4 Holzꢃ

R

S

A

N

Z

(TP)

U

* PT02H-XX-XXX

** PT02Y-XX-XXX

† PT02H-XX-XXX (100)

†† PT02Y-XX-XXX (100)

To complete part number see how to order on page 25.

* Solder cup pin contacts without interfacial seal

** Solder cup pin contacts with interfacial seal

† Flat eyelet pin contacts without interfacial seal

†† Flat eyelet pin contacts with interfacial seal

■ (MMC) located within .0025 of (TP)

Recept. Front View

A Dia.

Receptacle Side View

L

N Dia.

+.001

-.005

U

+.011

-.010

Shell Size

R

S

K

.015

Z

Max.

+.001

-.005

+.025

-.015

(TP)

.016

6

.469

.594

.688

.812

.348

.473

.047

.079

.494

.556

.588

.438

.562

.062

.344

.377

8

10

12

14

16

18

20

22

24

.719

.938

.590

.672

.812

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.781

.906

.875

.906

.969

1.000

1.125

1.250

1.375

1.500

1.031

1.156

1.250

1.375

1.500

1.062

1.156

1.250

1.375

All dimensions for reference only.

23

PT07H (MS3114H)

hermetic jam nut receptacle

S

H

M

Z

S

A

R

P

K

* PT07H-XX-XXX

** PT07Y-XX-XXX

** MS3114H-XXCXXX

† PT07H-XX-XXX (100)

†† PT07Y-XX-XXX (100)

†† MS3114H-XXYXXX

To complete part number see how to order on page 25.

* Solder cup pin contacts without interfacial seal

** Solder cup pin contacts with interfacial seal

† Flat eyelet pin contacts without interfacial seal

†† Flat eyelet pin contacts with interfacial seal

Recept. Front View

Receptacle Side View

P Panel Thickness

Shell

Size

H Hex

+.017

-.016

A

+.001

-.005

K

+.0ꢀ3

-.016

M

+.031

-.000

R

S

.016

Thread

Class 2A

Z Max.

Max.

Min.

6

.812

.938

.625

.750

.348

.473

.094

.125

.696

.884

.917

.125

.250

.062

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8750-20 UNEF

1.0000-20 UNEF

1.1250-18 NEF

1.2500-18 NEF

1.3750-18 NEF

1.5000-18 NEF

1.6250-18 NEF

.206

.081

.048

8

10

12

14

16

18

20

22

24

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

.875

.590

1.062

1.188

1.312

1.438

1.562

1.688

1.812

.750

.875

1.000

1.125

1.250

1.375

1.500

All dimensions for reference only.

24

PT, SP, MS/PT

how to order

PT,SP

Ex: PT00A-20-41PW003

7.

Insert Rotation

W

8.

1.

Connector Type

PT

2.

Shell Style

00

3.

4.

Shell Size

20

5.

6.

Insert

Arrangement

Service Class

Contact Conﬁguration

Finish

003

A

41

P

1. Connector Type

3. Service Class

7. Insert Rotation

standard olive drab, electrically conductive cadmium

plate bayonet lock connector with solder contacts

No letter is required for normal position

A

C

General duty back shell

Pressurized receptacle

PT

W

electrically non-conductive, hard anodic coated bay-

SP onet lock connector with solder contacts and larger

X

Environmental resisting open wire seal with grom-

met and nut

Refer to page 6

E

P

ﬂange and mounting holes for back panel mounting

Y

Z

PTG plug with grounding ﬁngers

Assembly with potting boot

Adapter for cable glad for moisture prooﬁng

jacketed cables

PG

2. Shell Style

8. Finish

H

Y

Hermetic* without interfacial seal

Hermetic* with interfacial seal

00 Wall mounting receptacle

01 Cable connecting receptacle

02 Box mounting receptacle

06 Straight plug

SR Designates a strain relief clamp

Indicate optional ﬁnishes as follows:

Sufﬁx added for ﬂat eyelet pin contacts in hermetic

versions

ꢀ. Shell Size

100

Shell sizes 6 - 24 available

OR

07 Jam nut receptacle

08 90 degree plug cable support

005 * Anodic coating - Alumilite® (standard on “SP”)

023 * Electroless nickel

5. Insert Arrangement

Refer to pages 4-10 for insert availability

(Use only the number following the hyphen)

B

I

thru bulkhead receptacle (pressurized)

Solder mount receptacle (Hermetic only)

025

Black zinc cobalt plating

072 * Conductive gray zinc nickel plating

6. Contact Conﬁguration

ꢀ2ꢀ * Electroless nickel ﬁnish with strain relief

P

S

Pin contacts

ꢀ70

725

Black zinc cobalt plating with strain relief

Gray zinc nickel plating with strain relief

Socket contacts

For ordering connectors with printed circuit board

contacts, see pg. 19.

*ꢀꢀRoHSꢀCompliantꢀﬁnish

Note: Olive drab cadmium is the default plating. If required on SP

typeꢀuseꢀsuﬃxꢀ(003).ꢀ

MS/PT

MIL-DTL-26ꢀ82, Series 1

Ex: MS3110E20-41PW

7.

8.

Insert Rotation

W

1.

2.

3.

Shell Style

0

4.

5.

Shell Size

20

6.

Insert Arrangment

41

Speciﬁcation

Number

Contact

Conﬁguration

Connector Type

Service Class

MS

311

E

P

1. Connector Type

ꢀ. Service Class

7. Contact Conﬁguration

MS Military standard

E

F

Environmental resisting connector

P

S

Pin contacts

Environmental resisting connectors

with strain relief

Socket contacts

2. Speciﬁcation Number

For ordering connectors with printed circuit board

contacts, see pg. 19.

Clamp assembly for moisture prooﬁng

multi-jacketed cables, with strain relief

Basic family number for

MIL-DTL-26482, Series 1 solder type

J

311

P

Potted type with potting boot

Hermetic

8. Insert Rotation

H

3. Shell Style

No letter is required for normal position

0

1

Wall mounting receptacle

W

5. Shell Size

Cable connecting receptacle

X

Refer to page 6

Shell sizes 8 - 24 available

Y

2

3

ꢀ

Box mounting receptacle

Solder mount receptacle (Hermetic only)

Jam nut receptacle

Z

6. Insert Arrangement

Refer to pages 4-10 for insert availability

(Use only the number following the hyphen)

6

Straight plug

* Hermetic connectors are supplied with tin plated shells.

** This connector style is sometimes referred to as a cable

connecting “plug”. It does, however, mate with either a

straight or 90 degree plug.

Hermetic Version:

In this version a letter replaces the hyphen between the

Shell Size and Insert Arrangement (Steps 5 and 6)

Y

Flat eyelet pin contacts

C

Solder cup pin contacts

25

Amphenol PT-SE, SP-SE, MS/PT-SE

Proprietary/MIL-DTL-26482, Series 1

bayonet coupling and crimp termination

Amphenol® SE crimp type miniature connectors provide

performance and versatility needed for applications

demanding high reliability and crimp removable contacts.

These crimp contacts are rear insertable/front release and

are held in position by an MS approved spring tower

retention system.

wall mounting

receptacle

TheꢀMS/PT-SEꢀSeriesꢀisꢀqualiﬁedꢀtoꢀMIL-DTL-26482,ꢀSeriesꢀ1ꢀandꢀhasꢀallꢀtheꢀ

outstanding design characteristics and quality of the PT Series.

TheꢀSP-SEꢀSeriesꢀisꢀaꢀmodiﬁcationꢀofꢀtheꢀPT-SE,ꢀprovidingꢀspecialꢀshellsꢀwithꢀaꢀ

wideꢀmountingꢀﬂangeꢀforꢀbackꢀpanelꢀmounting.

cable

connecting

receptacle*

Aꢀcorrosionꢀresistantꢀelectricallyꢀconductiveꢀﬁnishꢀofꢀcadmiumꢀplateꢀwithꢀanꢀ

olive drab chromate after-treatment is used on the PT-SE and MS/PT-SE. The

SP-SE is given a durable non-conductive hard anodic “Alumilite”® coating

which provides abrasion protection and resistance to corrosion.

500 hour corrosion resistance, RoHS compliant harsh environment conductive

plating. Gray Zinc over an Electroless Nickel (Gray ZnNi) base, with a Light Gun

Metal Gray appearance.

box mounting

receptacle

Shell components for these series are aluminum. The dependable 5 key/

keywayꢀpolarizationꢀwithꢀbayonetꢀlockꢀcouplingꢀassuresꢀpositiveꢀmatingꢀwithꢀ

no chance of cross plugging. Spring tension provided by a wave washer in the

coupling nut

ensures maintenance of interfacial seal between mating halves.

Both the insert and main joint gasket are molded from resilient neoprene.

This provides excellent moisture sealing at the gasket and superior electrical

isolation of the contact in the insert.

straight plug

Both pins and sockets are machined from a copper alloy and are gold plated.

Thisꢀgoldꢀplatingꢀeliminatesꢀcontactꢀcorrosionꢀandꢀoﬀersꢀanꢀindeﬁniteꢀshelfꢀ

life. Socket contacts for these series are closed entry design.

Breakaway style plug is available in PT-SE crimp.

jam nut

receptacle

The PT-SE, SP-SE and MS/PT-SE Series are intermateable and intermountable

with all existing Miniature Cylindrical Series connectors.

Refer to pages 4-10 for insert arrangement availability.

* This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

26

PT-SE, SP-SE, MS/PT-SE

Contact Speciﬁcations

Maximum

Millivolt Drop†

Crimp Well

Diameter

Minimum Well

Depth

Contact Size

Test Current

“SE”,

20

16

12

7.5

55

49

42

.049 .001

.067 .001

.100 .002

.267

.236

MS / “E”

open wire seal

13.0

23.0

Service Rating

Recommended

Operating AC

Voltage at Sea

Level

Test Voltage AC (RMS), 60 cps

Service

Rating

70,000 ft.

110,000 ft.

Sea Level

50,000 ft.

I

600

1,500

2,300

500

750

375

500

200

II

1,000

† Silver plated wire per MIL-DTL-26482

PT-SE and SP-SE Service Classes

PT-SE and SP-SE connectors are available in the three

service classes listed below.

“SE” (SR),

MS / “F”

strain relief

clamp

“SE”

Open wire sealing - environmental resistant,

ꢀꢀꢀꢀwithꢀaꢀnutꢀandꢀgrommetꢀforꢀmoistureꢀprooﬁng

individual wires

ꢀ

“SE (SR)“ Strain relief clamp - environmental resistant

strain relief clamp and grommet for moisture

ꢀ

ꢀꢀꢀꢀprooﬁngꢀindividualꢀwires;ꢀprovidesꢀadded

wire bundle support

Translucent nylon boot for retaining customer

ꢀꢀꢀꢀappliedꢀpottingꢀcompounds;ꢀheldꢀinꢀplaceꢀby

a threaded ring

“SP”

ꢀ

MS/PT-SE Service Classes

MS-SE series connectors are available in the following

certiﬁedꢀserviceꢀclasses:

“E”

Open wire sealing - environmental resisting

connectors are supplied with a multi-hole

grommet and clamping nut for moisture

prooﬁngꢀindividualꢀopenꢀwires

Environmental resistant strain relief clamp

andꢀgrommetꢀforꢀmoistureꢀprooﬁngꢀindividual

wires;ꢀprovidesꢀaddedꢀwireꢀbundleꢀsupport

Potting applications - these connectors are

supplied with a translucent nylon boot for retention

of customer applied potting compound

“SP”,

MS / “P”

potting boot

ꢀ

“F”

ꢀ

“P”

27

PT00 SE (MS3120)

SP00 SE

wall mounting receptacle

S

T Dia.

4 Holes

R

(TP)

R

S

(TP)

TERMINATION ASSEMBLIES

“SE” (SR), MS / “F” Strain Relief

“SE” Open Wire Seal

“SP” Potting Boot

L

A

N

M

K

PT00SE-XX-XXX

SP00SE-XX-XXX

MS3120E-XX-XXX

PT00SE-XX-XXX (SR)

SP00SE-XX-XXX (SR)

MS3120F-XX-XXX

PT00SP-XX-XXX

SP00SP-XX-XXX

To complete part number see how to order on page 36.

■(MMC) located within .005 of (TP)

Receptacle Front View

Receptacle Side View

M

+.010

-.000

Shell

Size

R

(TP)

S

Max.

T Dia.

.005

P*

A Dia.

+.001

-.005

K

.016

Panel Thickness

PT

.594

SP

-

PT

SP

PT

SP

-

PT

SP

-

PT

SP

-

8

.828

-

.120

.147

.473

.590

.062

.094

.431

.556

.589

.094

.219

10

12

14

16

18

20

22

24

.719

.812

.938

1.031

1.125

1.203

1.297

1.375

1.500

.954

1.141

1.226

1.360

1.453

1.532

1.688

1.766

1.891

.150

.462

.556

.589

.125

.219

.812

1.047

1.141

1.234

1.328

1.453

1.578

1.703

.750

.906

.875

.969

1.000

1.125

1.250

1.375

1.500

1.062

1.156

1.250

1.375

Class “SE”, MS/”E”

L

Class “SE”(SR), MS/”F”

Class “SP”, MS/”P”

Shell

Size

N Dia.

Max

G

L

Max.

N

Max.

D Dia.

Max.

L

Max.

N Dia.

Max.

Dia.

.125

.188

.312

.375

.500

.625

.750

.800

8

1.328

1.359

1.422

.560

2.422

2.537

2.824

2.900

.781

-

10

12

14

16

18

20

22

24

.704

.844

.444

.558

.683

.808

.909

1.034

1.159

1.284

1.656

1.750

1.782

.734

.825

.969

.858

.954

1.094

1.156

1.406

1.594

1.688

.984

1.080

1.204

1.330

1.454

1.580

1.110

1.234

1.360

1.484

1.610

* Back panel mounting

All dimensions for reference only.

28

MF00 SE (MS3128)

wall mounting receptacle

Tꢀ Dia.

4 Holes

S

Rꢀ

(TP)

R

(TP)

R

Rꢀ

S

(TP) (TP)

T Dia.

4 Holes

MS / “F” Strain Relief

“SE” Open Wire Seal

TERMINATION ASSEMBLIES

L

N

A

M

K

MF00SE-XX-XXX (SR)

MS3128F-XX-XXX

MF00SE-XX-XXX

MS3128E-XX-XXX

Receptacle Front View

Receptacle Side View

Class MS/ ”E”

Shell

Size

Class MS/ “F”

A Dia.

+.001

-.000

M

+.010

-.000

S

T Dia.

.005

T1 Dia.

.005

K

.016

R

R1

L

N

F

G

L

N

Max.

Min.

Dia.

Max.

10

.719

.812

1.141

1.266

1.360

1.453

1.532

1.688

1.766

1.891

.120

.147

.150

.590

.062

.462

.556

.589

1.328

1.28

.685

.297

.188

1.906

2.000

2.172

2.234

.891

12

14

16

18

20

22

24

.812

.938

.750

.062

.094

.813

.422

.547

.609

.734

.922

.984

.312

.375

.500

.625

.750

.800

1.016

1.141

1.203

1.469

1.656

1.750

.906

1.031

1.125

1.203

1.297

1.375

1.500

.875

.930

.969

1.000

1.125

1.250

1.375

1.500

1.057

1.175

1.301

1.428

1.533

1.062

1.156

1.250

1.375

1.359

1.422

All dimensions for reference only.

29

PT01 SE (MS3121)

SP01 SE

cable connecting receptacle

S

TERMINATION ASSEMBLIES

“SE” Open Wire Seal

“SE” (SR), MS / “F” Strain Relief

“SP”, MS / “P” Potting Boot

L

D

N

A

K

PT01SE-XX-XXX

SP01SE-XX-XXX

MS3121E-XX-XXX

PT01SE-XX-XXX (SR)

SP01SE-XX-XXX (SR)

MS3121F-XX-XXX

PT01SP-XX-XXX

SP01SP-XX-XXX

MS3121P-XX-XXX

Note: This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

To complete part number see how to order on page 36.

Receptacle

Front View

Receptacle Side View

Class “SE” (SR), MS/”F”

Shell

Size

Class “SE”, MS/ ”E”

Class “SP”, MS/”P”

S

Max.

A Dia.

+.001

-.005

K

.018

L

Max.

N Dia.

Max.

N

Max.

L

N Dia.

Max.

G Dia.

L Max.

D Dia.

Max.

8

.832

.975

.473

.590

.094

.115

1.522

1.709

.560

.685

.125

.188

.312

.375

.500

.625

.750

.800

2.422

2.537

2.824

2.900

.828

.891

-

10

12

14

16

18

20

22

24

.444

.558

.683

.808

.909

1.034

1.159

1.284

1.656

1.750

1.782

.734

1.068

1.162

1.256

1.349

1.475

1.599

1.729

.750

.813

1.016

1.141

1.203

1.469

1.656

1.750

.858

.875

.930

.984

1.000

1.125

1.250

1.375

1.500

1.057

1.175

1.301

1.428

1.555

1.110

1.234

1.360

1.484

1.610

All dimensions for reference only.

30

PT02 SE (MS3122)

SP02 SE

box mounting receptacle

S

L

R

M

(TP)

K

R

S

A

N

(TP)

T Dia.

4 Holes

D

PT02SE-XX-XXX

SP02SE-XX-XXX

MS3122E-XX-XXX

To complete part number see how to order on page 36.

■ (MMC) located within .0025 of (TP)

Receptacle Front View

Receptacle Side View

T

Dia.

.005

M

+.010

-.000

A

N

Dia.

+.011

-.000

Shell

Size

S

Max.

D

Max.

R

Dia.

+.001

-.005

K

.025

L

Max.

PT

.594

SP

PT

.828

SP

PT

.120

SP

PT

.312

SP

PT

.431

SP

8

-

.473

-

.062

1.358

1.296

1.358

-

.438

10

12

14

16

18

20

22

24

.719

.812

.954

1.141

1.266

1.360

1.453

1.532

1.688

1.766

1.891

.120

.147

.150

.590

.312

.406

.219

.062

.094

.431

.556

.589

.462

.562

.812

.938

1.047

1.141

1.234

1.328

1.453

1.578

1.703

.150

.750

.219

.344

.462

.556

.589

.688

.906

1.031

1.125

1.203

1.297

1.375

1.500

.875

.812

.969

1.000

1.125

1.250

1.375

1.500

.938

1.062

1.156

1.250

1.375

1.062

1.188

1.312

1.438

All dimensions for reference only.

31

MF02 SE (MS3127)

box mounting receptacle

Tꢀ Dia.

4 Holes

S

L

Rꢀ

(TP)

M

R

K

(TP)

R

Rꢀ

S

A

N

(TP) (TP)

T Dia.

D

4 Holes

MF02SE-XX-XXX

MS3127E-XX-XXX

To complete part number see how to order on page 36.

■ (MMC) located within .0025 of (TP)

Receptacle Front View

Receptacle Side View

K

N

Dia.

+.011

-.000

Shell

Size

A

M

+.010

-.000

S

T

.005

T1

.005

D

L

R

R1

Dia.

Max.

+.001

-.005

Max.

.016

Max.

10

12

14

16

18

20

22

24

.562

.688

.719

.812

.938

1.141

1.266

1.360

1.453

1.532

1.688

1.766

1.891

.120

.147

.150

.590

.750

.219

.344

.062

.094

1.266

1.328

.462

.556

.589

.812

.906

1.031

1.125

1.203

1.297

1.375

1.500

.875

.938

.969

1.000

1.125

1.250

1.375

1.500

1.062

1.188

1.312

1.438

1.062

1.156

1.250

1.375

All dimensions for reference only.

32

PT06 SE (MS3126)

SP06 SE

straight plug

S

TERMINATION ASSEMBLIES

“SE”, MS / “E” Open Wire Seal

“SE” (SR), MS / “F” Strain Relief

“SP”, MS / “P” Potting Boot

L

N

G N

D N

Z pin contacts

Zꢀ socket contacts

Z pin contacts

Zꢀ socket contacts

Z pin contacts

Zꢀ socket contacts

PT06SE-XX-XXX

SP06SE-XX-XXX

PTG06SE-XX-XXX

MS3126E-XX-XXX

PT06SE-XX-XXX (SR)

SP06SE-XX-XXX (SR)

PTG06SE-XX-XXX (SR)

MS3126F-XX-XXX

PT06SP-XX-XXX

SP06SP-XX-XXX

PTG06SP-XX-XXX

MS3126P-XX-XXX

To complete part number see how to order on page 36.

Plug Front View

Plug Side View

Class “SE”, MS/”E”

Class “SE” (SR), MS/”F”

Class “SP”, MS/”P”

Shell Size

S Dia.

Max.

Z

.0ꢀ5

Z1

G

L

N

D

Dia.

L

Max.

N Dia.

Max.

.0ꢀ5

L Max.

N Max.

Dia.

.125

.188

.312

.375

.500

.625

.750

.800

Max.

8*

10

12

14

16

18

20

22

24

.734

.859

.640

.579

1.328

1.297

1.359

.540

.685

2.413

2.528

2.753

2.830

.828

.327

.444

1.750

1.766

.578

.734

.891

1.031

1.156

1.281

1.391

1.531

1.656

1.777

.813

1.016

1.141

1.203

1.469

1.656

1.750

.558

.858

.930

.683

.984

1.057

1.175

1.301

1.428

1.533

.808

1.110

1.234

1.360

1.484

1.610

.909

1.034

1.159

1.284

* PT-SE, MS-SE and MS-SP only.

All dimensions for reference only.

33

PT07 SE (MS3124)

S

SP07 SE

H

jam nut receptacle

S

TERMINATION ASSEMBLIES

“SE”, MS / “E” Open Wire Seal

“SE” (SR), MS / “F” Strain Relief

“SP”, MS / “P” Potting Boot

L

M

K

R

K

J

N

J

F N

J

A

G N

A

R

P

R

P

PT07SE-XX-XXX

SP07SE-XX-XXX

MS3124E-XX-XXX

PT07SE-XX-XXX (SR)

SP07SE-XX-XXX (SR)

MS3124F-XX-XXX

PT07SP-XX-XXX

SP07SP-XX-XXX

MS3124P-XX-XXX

To complete part number see how to order on page 36.

All lockwire holes are .044 Dia. Min.

Receptacle Front View

A Dia.

Receptacle Side View

P

J Flat

+.000

-.010

K

+.011

-.010

R

Shell Size

H Hex

Max.

S

M

.005

Panel Thickness

Min. Max.

.062 .125

+.001

-.005

Thread

Class 2A

Max.

8

.767

.954

.473

.530

.125

.696

.884

.917

.5625-24 UNEF

.6875-24 NEF

.8750-20 UNEF

1.0000-20 UNEF

1.1250-18 NEF

1.2500-18 NEF

1.3750-18 NEF

1.5000-18 NEF

1.6250-18 NEF

10

12

14

16

18

20

22

24

.892

1.078

1.266

1.391

1.516

1.641

1.828

1.954

2.078

.590

.655

.125

.156

.062

.125

.250

1.079

1.205

1.329

1.455

1.579

1.705

1.829

.750

.818

.875

.942

1.000

1.125

1.250

1.375

1.500

1.066

1.191

1.316

1.441

1.556

Class “SE”, MS/”E”

Class “SE” (SR), MS/”F”

Class “SP”, MS/”P”

Shell Size

L

Max.

N

Max.

F

G Dia.

Free

L

Max.

N

Max.

G

Dia.

L

Max.

N Dia.

Max.

Min.

.234

.297

.422

.547

.609

.734

.922

.984

8

1.438

1.625

1.688

.749

.874

.125

.188

.312

.375

.500

.625

.750

.800

1.922

2.000

2.172

2..234

.828

-

10

12

14

16

18

20

22

24

.891

.444

.558

.683

.808

.909

1.656

1.922

1.951

.734

.999

1.016

1.141

1.203

1.469

1.656

1.750

.858

1.124

1.249

1.374

1.530

1.655

1.780

.984

1.110

1.234

1.360

1.484

1.610

1.034

1.159

1.284

All dimensions for reference only.

34

PT08 SE

SP08 SE

90 degree plug

G

TERMINATION ASSEMBLIES

“SP” Potting Boot 75 degrees

“SE” Open Wire Seal, “SE” (SR) Strain Relief

L

E

A

B

H

PT08SE-XX-XXX

PT08SP-XX-XXX

SP08SP-XX-XXX

SP08SE-XX-XXX

PT08SE-XX-XXX (SR)

SP08SE-XX-XXX (SR)

D

K

C

To complete part number see how to order on page 36.

All lockwire holes are .044 Dia. Min.

Plug Front View

Plug Side View

C

+.010

-.025

E

+.0ꢀ7

-.025

Shell Size

G Dia.

Max.

B

.031

D

.062

L

Max.

A

.025

H

.015

K

.015

L

Max.

10

12

14

16

18

20

22

24

.921

.749

.812

.170

.264

.310

.330

.444

.510

.515

.656

1.191

1.254

1.316

1.562

1.625

1.719

1.750

.393

.450

.519

.583

.621

.683

.739

.787

2.137

2.222

2.370

2.572

2.680

2.753

2.799

3.037

.547

.625

.734

.750

.781

.859

.906

1.181

.438

.516

.625

.656

.703

.766

.812

.918

.562

.688

2.031

2.093

2.203

2.250

2.296

2.343

2.390

2.624

1.046

1.171

1.297

1.422

1.562

1.672

1.797

.905

.781

1.030

1.015

1.077

1.139

1.250

.890

1.000

1.125

1.234

1.374

All dimensions for reference only.

35

PT-SE, SP-SE, MS/PT-SE

how to order

PT-SE, SP-SE

Ex: PT00SE-20-41PW003

7.

Insert Rotation

W

8.

1.

Connector Type

PT

2.

Shell Style

00

3.

Service Class

SE

4.

Shell Size

20

5.

6.

Insert

Arrangement

Contact Conﬁguration

Finish

003

41

P

1. Connector Type

3. Service Class

7. Insert Rotation

standard olive drab, electrically conductive cadmium

plate bayonet lock connector with solder contacts

No letter is required for normal position

SE Environmental crimp

SP potted type crimp

PT

W

standard olive drab, electrically conductive cadmium

plated, bayonet lock connector with dual mounting

holes, and

X

Both of the above are Amphenol proprietary versions of the

MILDTL-26482, Series 1 crimp contact connector and offer

15 lbs. contact retention for size 20 contacts; 25 lbs. for size

16 contacts.

Refer to page 6

MF

Y

crimp contacts

Z

electrically non-conductive, hard anodic coated bay-

SP onet lock connector with solder contacts and larger

adapter for cable gland for moisture prooﬁng

jacketed cables

PG

ﬂange and mounting holes for back panel mounting

SQ Braided shield termination

8. Finish

2. Shell Style

G

Heatshrink termination

SR Designates a strain relief clamp

Indicate optional ﬁnishes as follows:

00 Wall mounting receptacle

01 Cable connecting receptacle

02 Box mounting receptacle

06 Straight plug

Sufﬁx added for ﬂat eyelet pin contacts in hermetic

versions

ꢀ. Shell Size

100

Shell sizes 8 - 24 available

OR

005 * Anodic coating - Alumilite® (standard on “SP”)

023 * Electroless nickel

5. Insert Arrangement

07 Jam nut receptacle

08 90 degree plug

Refer to pages 4-10 for insert availability

(Use only the number following the hyphen)

025

Black zinc cobalt plating

072 * Conductive gray zinc nickel plating

6. Contact Conﬁguration

ꢀ2ꢀ * Electroless nickel ﬁnish with strain relief

P

S

Pin contacts

ꢀ70

725

Black zinc cobalt plating with strain relief

Gray zinc nickel plating with strain relief

Socket contacts

*ꢀꢀRoHSꢀCompliantꢀﬁnish

MS/PT-SE

MIL-DTL-26ꢀ82, Series 1

Note: Olive drab cadmium is the default plating. If required on SP

typeꢀuseꢀsuﬃxꢀ(003).ꢀ

Ex: MS3120E20-41PW

7.

8.

Insert Rotation

W

1.

Connector Type

MS

2.

3.

Shell Style

0

4.

5.

Shell Size

20

6.

Insert Arrangement

41

Speciﬁcation

Number

Contact

Conﬁguration

Service Class

311

E

P

1. Connector Type

ꢀ. Service Class

7. Contact Conﬁguration

MS Military standard

E

F

P

Environmental resisting connector

P

S

Pin contacts

Environmental resisting connectors with strain relief

Potted type with potting boot

Socket contacts

2. Speciﬁcation Number

312 basic family for MIL-DTL-26482, Series 1 crimp type

8. Insert Rotation

SQ Braided shield termination

Heatshrink termination

No letter is required for normal position

G

3. Shell Style

W

0

1

2

ꢀ

6

7

8

Wall mounting receptacle

X

Refer to page 6

5. Shell Size

Cable connecting receptacle*

Box mounting receptacle

Y

Shell sizes 8 - 24 available

Z

Jam nut receptacle

* This connector style is sometimes referred to as a cable

connecting “plug”. It does, however, mate with either a

straight or 90 degree plug.

6. Insert Arrangement

Straight plug

Refer to pages 4-10 for insert availability

(Use only the number following the hyphen)

box mounting receptacle with dual mounting holes

wall mounting receptacle with dual mounting holes

36

PT & SP

accessoriesꢀ–ꢀsealingꢀplugs,ꢀﬂangeꢀgaskets,

potting boots

SEALING PLUGS- FOR PT & SP

A

Dia.

.010

B

Dia.

.005

Contact

Size

MS

Number

C

.010

Color

Code

Amphenol®

Part Number

C

B

DIA

12

16

20

10-405996-12

10-405996-16

MS27488-12

MS27488-16

MS27488-20

.121

.083

.060

.171

.133

.090

.564

Yellow

Blue

.135 +.030

–.025

A

DIA

Red

How to Order: Order by 10- (Proprietary) or MS part number as shown in chart

above.

SEALING PLUG

MS27488-XX

10-405996-XX

MOUNTING FLANGE GASKETS – FOR PT & SP

PT & SP

10-1019ꢀ9

10-1509ꢀ9

PT

10-1019ꢀ9

SP

10-1509ꢀ9

.130 DIA SIZE 6 TO 22

.156 DIA SIZE 24

.160 DIA 10-150949

Shell Size

F

R

.010

S

.010

R

.010

S

.010

T

.008

+.016

-.000

6

.469

.594

.688

.812

.641

.734

.953

.375

.500

.024

8

1.047

1.125

1.250

1.344

1.438

1.516

1.672

1.750

1.875

T

10

12

14

16

18

20

22

24

.719

.938

.812

.625

.813

1.031

1.125

1.219

1.312

1.438

1.563

1.688

.938

.750

.906

1.031

1.125

1.203

1.297

1.375

1.500

.875

.969

1.000

1.125

1.250

1.375

1.500

MOUNTING FLANGE GASKET

10-101949-XX

10-150949-XX

1.063

1.156

1.250

1.375

HowꢀtoꢀOrder:ꢀForꢀPT:ꢀ10-101949-XXꢀ(completeꢀorderꢀnumberꢀwithꢀdesiredꢀshellꢀsize).

ForꢀSP:ꢀ10-150949-XXꢀ(completeꢀorderꢀnumberꢀwithꢀdesiredꢀshellꢀsize).

ꢀ

75° POTTING BOOTS – FOR PT & SP

Shell

Size

B

Max.

D

.015

E

.015

L

Max.

B

E

15º

REF

8

.433

.493

.552

.643

.658

.689

.750

.794

1.070

.312

.438

.516

.625

.656

.703

.766

.812

.918

.438

.562

.766

.830

10

12

14

16

18

20

22

24

D

.688

.861

.781

.916

L

.890

.936

1.000

1.125

1.234

1.374

.959

1.052

1.073

1.310

75° POTTING BOOT

10-101988-XX

HowꢀtoꢀOrder:ꢀ10-101988-XXꢀ(completeꢀorderꢀnumberꢀwithꢀdesiredꢀshellꢀsize).

All dimensions for reference only

37

CLASS “E” STRAIN RELIEF CLAMP – FOR PT & SP

PT & SP

Shell

Size

B

C Thread

Class 2B

D

G

L

Max.

Min.

Max.

accessories – clamps

8

.550

.675

6-32 NC

8-32 NC

.240

.302

.428

.552

.615

.740

.928

.812

.875

.930

10

12

14

16

18

20

22

24

.803

1.000

1.125

1.188

1.438

1.719

.930

.920

.930

1.047

1.165

1.291

1.418

1.533

1.062

1.093

L

B

D G

How to Order:

10-101971-XX X

C

Addꢀdesiredꢀꢀ

shellꢀsizeꢀꢀ

ꢀ

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀAddꢀdesiredꢀﬁnishꢀsuﬃx†

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ“3”ꢀdesignatesꢀoliveꢀdrabꢀcadmium

“5’ designates Alumilite®

CLASS “E” STRAIN RELIEF CLAMP

10-101971-XX

Not for use with jam nut style connectors

CLASSES “A” & “P” STRAIN RELIEF CLAMP – FOR PT & SP

L

Shell

Size

B

Max.

C Thread

Class 2B

D

Min.

G

Max.

+.010

-.020

8

.540

.665

6-32 NC

.240

.302

.428

.552

.614

.740

.928

.938

.812

.875

.843

10

12

.793

6-32 NC

1.000

1.125

1.188

1.438

1.719

.843

14

.910

6-32 NC

.843

L

16

1.037

1.155

1.281

1.408

1.533

6-32 NC

.975

18

8-32 NC

.975

20

8-32 NC

1.007

B

D G

22

24

8-32 NC

How to Order:

10-101980-XX X

C

Addꢀdesiredꢀꢀ

shellꢀsizeꢀꢀ

ꢀ

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀAddꢀdesiredꢀﬁnishꢀsuﬃx†

CLASSES “A” & “P” STRAIN

RELIEF CLAMP

10-101980-XX

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ“3”ꢀdesignatesꢀoliveꢀdrabꢀcadmium

“5’ designates Alumilite®

Not for use with jam nut style connectors

CLASS “A” CABLE CLAMPS – FOR PT & SP

Shell

Size

A

.031

B

Max.

C

V

Amphenol®

Part Number

Dia. Min.

Thread

10

12

97-3057-1004

97-3057-1007

97-3057-1008

97-3057-1010

97-3057-1012

97-3057-1016

.795

.850

.920

.927

1.015

.842

.995

.3125

.4375

.5625

.6250

.7500

.9375

.6250-24

.7500-20

.8750-20

1.0000-20

1.1875-18

1.4375-18

14

1.120

1.216

1.403

1.683

16

V Thread

18/20

22/24

HowꢀtoꢀOrder:ꢀOrderꢀbyꢀ97-3057-XXXXꢀnumberꢀlistedꢀabove.ꢀStandardꢀﬁnishꢀisꢀꢀ oliveꢀ

drabꢀzincꢀalloy.ꢀConsultꢀAmphenol,ꢀSidney,ꢀNYꢀforꢀalternateꢀﬁnishes.

B

†ꢀStandardꢀaccessoryꢀﬁnishesꢀareꢀ“3”ꢀoliveꢀdrabꢀcadmiumꢀforꢀPTꢀandꢀMS/PTꢀtypes,

“5” Alumilite® for SP types. Electroless nickel plating is also available on some

items;ꢀconsultꢀAmphenol,ꢀSidney,ꢀNY

C

A

All dimensions for reference only.

CLASS “A” CABLE CLAMP

97-3057-XXXX

38

PT, SP, MS/PT

accessories – protection caps

RECEPTACLE PROTECTION CAPS – FOR PT, SP, MS/PT

PLUG PROTECTION CAPS – FOR PT, SP, MS/PT

C

B

.140 +.010

–.005

L

DIA

FOR SIZE 24

.125 +.010

–.005

DIA

+.010

N

G

.140

FOR SIZE 6-22

X

RECEPTACLE PROTECTION CAP

FOR PT, SP, MS/PT CONNECTORS

PLUG PROTECTION CAP

FOR PT, SP, MS/PT CONNECTORS

10-101964-XXX

MS3181-XXX

(Jam Nut Recptacle)

MS3180-XXX

10-101957-XXX

10-101960-XXX

MS3181-XXX

(Wall Receptacle)

10-101961-XXX

(Cable Connecting

Receptacle)

B Dia. C Dia.

G

Dia.

Max.

L

X

N Dia.

+.001

-.005

L Dia.

+.025

-.015

X

Shell

Size

Shell

Size

Std. & MS

CA, RA

MS only

CAL/ RAL

+.010

-.000

+.010

-.000

+.020

Std. & MS

MS only

-.000 RA, CA, NA RAL/CAL/NAL

6

.348

.473

.532

.594

.627

3.000

3.500

4.000

5.000

6

.328

.454

.578

.577

.706

.563

.603

3.000

3.500

4.000

5.000

8

10

12

14

16

18

20

22

24

.590

10

12

14

16

18

20

22

24

.578

.703

.816

.750

.703

.891

1.000

1.128

1.257

1.367

1.496

1.624

1.747

.875

.844

1.016

1.141

1.266

1.391

1.516

1.614

1.000

1.125

1.250

1.375

1.500

.969

1.094

1.219

1.343

1.453

How to Order Proprietary Receptacle Caps:

Wall Receptacle Caps:

How to Order Proprietary Plug Caps:

10-101957-XX X

10-101960- XX X

ꢀ

Addꢀdesiredꢀshellꢀsize

Cable Connecting Receptacle Caps:

Jam Nut Receptacle Caps:

10-101961- XX X

10-101964- XX X

ꢀ

Addꢀdesiredꢀﬁnishꢀsuﬃx†

“FL”ꢀdesignatesꢀgrayꢀzincꢀnickel

ꢀ

Addꢀdesiredꢀshellꢀsize

“3” designates olive drab cadmium

“5” designates Alumilite®

ꢀ

Addꢀdesiredꢀﬁnishꢀsuﬃx†

“FL”ꢀdesignatesꢀgrayꢀzincꢀnickel

“3” designates olive drab cadmium

“5” designates Alumilite®

Proprietary caps are supplied with standard bead chains only (as

shown in drawing at left). For other chain options an MS version

cap should be ordered.

Proprietary caps are supplied with standard bead chains only (as shown

in drawing at left). For other chain options, an MS version cap should be

ordered.

How to Order

MSꢀVersionꢀPlugꢀCaps:ꢀꢀ

MS3180-ꢀXXꢀꢀꢀꢀꢀ-CAꢀforꢀsashꢀchain

HowꢀtoꢀOrderꢀMSꢀVersionꢀReceptacleꢀCaps:

-CAL for long sash chain

-RA for rope chain

Wall Receptacle Caps:

MS3181- XX

-CA for sash chain

-CAL for long sash chain

-RA for rope chain

ShellꢀSizeꢀꢀ

ꢀ

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ-RALꢀforꢀlongꢀropeꢀchain

-RAL for long rope chain

-NA for sash chain

Jam Nut Recept. Caps:

MS3181- XX

-NAL for long sash chain

ꢀ

Shellꢀsize

MSꢀversionsꢀareꢀsuppliedꢀwithꢀstandardꢀanodizeꢀﬁnishꢀonly.ꢀForꢀotherꢀ

ﬁnishꢀoptionsꢀaꢀproprietaryꢀcapꢀshouldꢀbeꢀordered.

39

PT & SP

accessories – dummy receptacles, “O” rings,

plastic dust caps

DUMMY RECEPTACLES – FOR PT, SP, MS/PT

Proprietary

Version

S

R

MS Version

M

N

.150 DIA. +.004

Shell

Size

K

.010

M

–.002

+.030 +.001

-.000 -.005

4 HOLES

K

R

S

R1

S1

(TP)

.005

.010

(TP)

8

.062

.462

.473

.590

.750

.875

.734

.812

1.047

1.125

1.250

1.344

1.438

1.516

1.672

1.750

1.875

.594

.719

.828

.954

R

S

N

10

12

14

16

18

20

22

24

.938

.812

1.047

1.141

1.234

1.328

1.453

1.578

1.703

1.031

.906

.462 1.000 1.125

.462 1.125 1.203

.556 1.250 1.297

.556 1.375 1.375

.589 1.500 1.500

.969

DUMMY RECEPTACLE

FOR PT, SP, MS/PT CONNECTORS

1.062

1.156

1.250

1.375

MS3115-XXX

10-150921-XXX

How to Order Proprietary Dummy Receptacles:

10-150921-XX X

ꢀ

Addꢀdesiredꢀshellꢀsize

ꢀ

Addꢀdesiredꢀﬁnishꢀsuﬃx†

ꢀ

“FL”ꢀdesignatesꢀgrayꢀzincꢀnickel

“3” designates olive drab cadmium

“5” designates Alumilite®

HowꢀtoꢀOrderꢀMSꢀVersionꢀDummyꢀReceptacles:ꢀꢀꢀ

ꢀ

MS3115-XXꢀX

Addꢀdesiredꢀshellꢀsize

Addꢀdesiredꢀﬁnishꢀsuﬃx†

ꢀ

-A designates Alumilite®

-L designates electroless nickel

-W designates olive drab cadmium

PLASTIC DUST CAPS – FOR PT, SP

How to Order Plastic Dust Caps:

Plug Plastic Dust

Receptacle Plastic

Dust Cap

Shell Size

Cap

Toꢀtheꢀbasicꢀorderꢀnumberꢀaddꢀtheꢀdustꢀcapꢀsizeꢀto

matchꢀconnectorꢀplugꢀorꢀreceptacleꢀshellꢀsize,ꢀas

shown in the tables above.

Example: 10-70506-12 would be the correct order

number for a plastic dust cap for a PT00 receptacle,

shellꢀsizeꢀ10.

6

10-70500-8

10-70506-12

10-70500-12

10-70506-16

10-70506-18

10-70506-20

10-70506-22

10-70506-24

10-70524-1

10-70506-28

10-70506-8S

10-70506-10

10-70506-12

10-70506-14

10-70506-16

10-70506-18

10-70506-20

10-79506-22

10-70506-24

10-70524-1

8

10

12

14

16

18

20

22

24

All dimensions for reference only.

40

PT accessories

glands

Nylon Cable Glands

Metal Cable Glands

Material: ꢀ

ꢀ

Nylonꢀ66ꢀ(ULꢀApprovedꢀ94V-2)

ULꢀ94V-2ꢀ(ULꢀApprovedꢀ94V-2)

Metric;ꢀPG,ꢀNPT

Material: ꢀ

Clamping:ꢀ

Seal Ring:ꢀ

BrassꢀwithꢀNickel;ꢀBrassꢀwithꢀTin/Nickel

Seal ring:ꢀ

ULꢀapprovedꢀPA6,ꢀ94V-0

Thread Type:ꢀ

Temp Range:

ULꢀ94V-2ꢀ(ULꢀapprovedꢀNBR,ꢀ94V-2;ULꢀꢀapproved

Static:

-40° to +100°C

ꢀ

DOWꢀCORNINGꢀRUBBER,ꢀ94V-0

Metric, PG, NPT

IP68 (tighten with o-ring)

-40° to +100°C

Dynamic:

Short Term:

-20° to +80°C

+120°

Thread Type:

Protective:

Temp Range:

Current Colors:

Gray, Black

TorqueꢀValueꢀ(N-M)ꢀofꢀhexꢀandꢀcapꢀnuts:ꢀ3.0-4.5ꢀN-MꢀM12,ꢀM16,ꢀM20ꢀ

areꢀULꢀrecognizedꢀunderꢀﬁleꢀ#E339605

Cable

Range

(mm)

Thread

“L”

(mm)

Clamp

“H”

(mm)

Spanner

“S”

(mm)

Cable

Range

(mm)

Thread

“L”

(mm)

Clamp

“H”

(mm)

Spanner

“S”

(mm)

M “d”

(mm)

Thread

“A”

M “d”

(mm)

AIGO Part

Thread “A”

AIGO Part

AIO-CSJM12

AIO-CSJM14

AIO-CSJM16

AIO-CSJM18

AIO-CSJM20

AIO-CSJM22

AIO-CSJM24

AIO-CSJM25

AIO-CSJM27

AIO-CSJM30

AIO-CSJM32

M12x1.5

M14x1.5

M16x1.5

M18x1.5

M20x1.5

M22x1.5

M24x1.5

M25x1.5

M27x1.5

M30x2.0

M32x1.5

6.5

8

3-6.5

4-8

6.2

5

15

19

20

24

23

26

27

14

15

18

22

24

27

30

32

40

AIO-CSM12

AIO-CSM16

AIO-CSM18

AIO-CSM20

AIO-CSM22

AIO-CSM24

AIO-CSM25

AIO-CSM30

AIO-CSM32

AIO-CSM33

AIO-CSM40

AIO-CSM50

AIO-CSM72

AIO-CSIN1/2

AIO-CSIN3/4

AIO-CSIN3/2

AIO-CSGIN3/4

AIO-CSGIN1

AIO-CSGIN5/4

AIO-CSGIN3/2

AIO-CSGIN5/2

AIO-CSPG7

AIO-CSPG9

AIO-CSPG11

AIO-CSPG13.5

AIO-CSPG16

AIO-CSPG21

AIO-CSPG29

AIO-CSPG36

AIO-CSPG42

M12 x1.5

8

3-6.5

4-8

8

20

22

25

30

33

38

39

48

50

75

28

32

50

26

27

33

48

75

20

22

24

26

28

33

38

48

52

15

19

22

24

27

33

42

54

60

80

24

33

54

24

33

42

54

80

15

19

22

24

27

33

42

54

60

M16 x 1.5

M18 x 1.5

M20 x 1.5

M22 x 1.5

M24 x 1.5

M25 x 1.5

M30 x 2.0

M32 x 1.5

M33 x 2.0

M40 x 1.5

M50 x 1.5

M72 x 2.0

NPT1/2”

NPT 3/4”

NPT 1”1/2”

G 1/2”

8

9

6-9

6.3

7

10

12

14

18

25

32

38

57

12

18

32

12

18

25

28

32

57

6.5

8

5-10

9

10

12

14

18

25

5-10

6-12

9

6-12

8.3

8

10-14

13-18

18-25

22-32

32-38

51-57

6-12

10

11

13

14

16

13.6

14.1

17.3

9

10-14

13-18

18-25

8

7.8

8

10

AIO-CSJM36

AIO-CSJM40

AIO-CSJM50

AIO-CSJM63

AIO-CSJM72

AIO-CSJM80

AIO-CSJM90

AIO-CSJIN1/2

AIO-CSJIN3/4

AIO-CSJIN5/4

M36x2.0

M40x1.5

M50x1.5

M63x1.5

M72x1.5

M80x2.0

M90x2.0

NPT 1/2”

NPT 3/4”

NPT 1”1/4”

25

32

38

44

52

60

70

12

18

32

18-25

22-32

32-38

37-44

46-52

52-60

62-70

6-12

10

34

39

43

47

57

25

26

41

40

50

60

67

75

90

100

24

30

50

11

12

16

20

13-18

22-32

6-12

20

13.6

14.1

17.3

13-18

22-32

G 3/4”

13-18

18-25

21-28

22-32

51-57

3-6.5

4-8

11

13

14

8

AIO-CSJIN3/2

AIO-CSJIN2

NPT 1”1/2”

NPT2”

32

44

52

70

12

18

25

32

22-32

37-44

46-52

62-70

6-12

17.3

17.7

23.7

26

46

58

24

27

34

39

50

65

80

100

24

30

40

50

G1”

G1”1/4

AIO-CSJIN5/2

AIO-CSJIN3

NPT2 1/2”

NPT3”

G1”1/2”

G2”1/2”

PG7

AIO-CSJGIN1/2

AIO-CSJGIN3/4

AIO-CSJGIN1

AIO-CSJGIN5/4

AIO-CSJGIN3/2

G1/2”

8

G3/4”

13-18

18-25

22-32

8

G1”

10

G1”1/4”

G1”1/2”

10

PG9

8

10

PG11

10

12

14

18

25

32

38

5-10

8

AIO-CSJGIN2

G2”

44

37-44

12

44

65

PG13.5

PG16

6-12

9

AIO-CSJGIN 5/2

AIO-CSJPG7

G2 1/2”

PG7

52

6.5

8

46-52

3-6.5

4-8

16

6

47

18

21

20

24

25

26

38

42

44

82

14

18

22

24

30

50

60

65

10-14

13-18

18-25

22-32

32-38

10

11

13

14

PG21

AIO-CSJPG9

PG9

7

AIO-CSJPG11

AIO-CSJPG13.5

AIO-CSJPG16

AIO-CSJPG21

AIO-CSJPG36

AIO-CSJPG42

AIO-CSJPG48

PG11

PG13.5

PG16

PG21

PG36

PG42

PG48

10

12

14

18

32

38

44

5-10

7

PG29

6-12

8

PG36

10-14

13-18

22-32

32-38

37-44

8

PG42

8

10

11

12

For additional information on other products available refer to our

Cord grips & Cable Glands, Catalog 12-055

41

Application Tools

“SE”

Theꢀfollowingꢀdataꢀincludesꢀinformationꢀpertainingꢀtoꢀtheꢀapplicationꢀtoolsꢀforꢀcrimping,ꢀinsertingꢀandꢀremovingꢀsizeꢀ

20, 16, and 12 contacts incorporated in Amphenol® Miniature Cylindrical Connectors.

Allꢀcrimpingꢀtoolsꢀincludedꢀareꢀtheꢀ“fullꢀcycling”ꢀtype,ꢀandꢀwhenꢀusedꢀasꢀspeciﬁedꢀbyꢀtheꢀmanufacturer,ꢀprovideꢀ

reliable crimped wire to contact termination.

Toolꢀframesꢀandꢀturretꢀheadsꢀareꢀavailableꢀfromꢀapprovedꢀtoolꢀmanufacturers;ꢀconsultꢀAmphenol,ꢀSidney,ꢀNYꢀforꢀlistings.

Assembly instructions are available online at www.amphenol-industrial.com

See the following:

L-786 for SE assembly instructions

L-555 for solder type instructions

CRIMPING TOOLS

FOR PT-SE, SP-SE, MS/PT-SE

(MIL-DTL-26482, Series 1) Connectors

MS Tool Part Number

Contact Size

Tool From

M22520/1-01

Turret Head

M22520/1-02

20

16

12

INSERTION/REMOVAL TOOLS

FOR PT-SE, SP-SE, MS/PT-SE

(MIL-DTL-26482, Series 1) Connectors

Insertion Tool

Removal Tool

Contact Size

MS

Amphenol®

Contact Insertion

Tool

Amphenol®

Contact

Removal Tool

Part Number

Contact Removal

Tool

Part Number Con-

tact Insertion Tool

Contact

Insertion Pliers

20

16

12

11-8107-20

11-8107-16

-

11-7401-20

11-7401-16

-

M81969/17-03

M81969/17-04

M81969/17-05

11-7880-20

11-7880-16

-

M81969/19-07

M81969/19-08

M81969/19-09

42

Contacts - Power and Thermocouple Crimp

for miniature cylindrical connectors

The following tables provide part number information for crimp contacts used in Amphenol® Miniature Cylindrical

Connectors. For additional information, consult Amphenol, Sidney, NY.

CRIMP CONTACTS for MIL-DTL-26482, Series 1

(PT-SE, SP-SE) Connectors

Pins

Sockets

Accommodates

Wire Size

Contact Size

Amphenol®

Proprietary

Number

Amphenol®

Proprietary

Number

MS Number

20, 22 & 24

AWG

20

M39029/31-240 10-683787-20P

M39029/31-228 10-683788-16P

M39029/31-235 10-807100-125

10-330930-20F

M39029/32-259 10-731210-3D1

M39029/32-247 10-679379-16D

M39029/32-254 10-807103-125

10-807155-205

16, 18 & 20

AWG

16

12

12 & 14 AWG

16 AWG

20-16

16-20

12-10

20 AWG

10-330932-16F

10-330933-16F

12 AWG

10-330938-12F

10-330939-12F

THERMOCOUPLE CONTACTS for Miniature Connectors

Pins

Sockets

Proprietary Part Number

Size

Material

SE

Chromel

Alumel

10-330940-21P

10-330940-21S

16 Crimp Termination

10-330940-22P

10-330940-1P

10-330940-2P

10-330940-3P

10-330940-4P

10-330940-22S

10-330940-1S

10-330940-2S

10-330940-3S

10-330940-4S

Chromel

Alumel

20 Crimp Termination

Iron

Constantan

See L-776 for thermocouple contact termination instructions. These are online at www.amphenol-industrial.com

For PCB contacts for miniature connectors, see page 20.

43

Coaxial Contacts

for miniature cylindrical connectors

Amphenol® Miniature Connectors can incorporate shielded coax

contacts. The Miniature family is built around MIL-DTL-26482

speciﬁcations,ꢀwithꢀMil-approvedꢀandꢀproprietaryꢀstylesꢀoﬀered.ꢀ

Normal operating voltage for Miniature cylindricals with power only

contactsꢀisꢀupꢀtoꢀ1,000ꢀVACꢀ(RMS)ꢀatꢀseaꢀlevel.

Table 1: Miniature Cylindricals oﬀer these features for contact

termination

ﬂexibility:

Solder Coax Contact

for use in Miniature Solder Type Connectors

•

Several insert arrangements that can incorporate:

Sizeꢀ8ꢀ&ꢀ12ꢀCrimpꢀCoaxꢀcontactsꢀforꢀCrimpꢀtype

Sizeꢀ8ꢀ&ꢀ12ꢀSolderꢀCoaxꢀcontactsꢀforꢀSolderꢀtype

Wideꢀselectionꢀofꢀconnectorꢀshellꢀstylesꢀandꢀsizes

Standard power contact options within the various connector

styles include: solder type, crimp front release, crimp rear release

Coax contacts are designed to the same high performance

standards as power contacts. Coax and power contacts may be

intermixed with no degradation of connector reliability.

No mis-mating or cross-plugging with insert rotation and keyway

polarization.

•

Table 2: GENERAL ORDERING INFORMATION

Amphenol Miniature Cylindricals are normally supplied with a full

complement of power contacts, separately packaged. Coax contacts

are ordered by part number as referenced in the part number charts

on the following pages of this catalog, and are substituted for the

power contacts at the time of the cable or equipment assembly. If

the application is for coax only, the connector may be ordered less

contacts and no power contacts will be supplied.

Pin Crimp Coax Contact

for use in Miniature Crimp SE Type Connectors

Installation instructions for the coax contacts for Miniature

Connectors are provided in Amphenol documents as follows: L-633 for

solderꢀtype;ꢀL-613ꢀforꢀSEꢀtype.

HOW TO ORDER:

A.

Select the coax contacts designed for the cable being used

from the applicable charts in this catalog for each Miniature

type (solder, SE).

Select a connector insert from those shown on pages 4-5

whichꢀwillꢀaccommodateꢀtheꢀquantityꢀandꢀsizeꢀofꢀcoaxialꢀꢀ

contacts needed plus any power contacts required. Note:

Sizeꢀ8Sꢀandꢀ12Sꢀcontactsꢀareꢀusedꢀwithꢀconnectorꢀinsertsꢀꢀ

throughꢀshellꢀsizeꢀ18ꢀonly.ꢀForꢀlargerꢀconnectorꢀshellꢀsizes,ꢀꢀ

useꢀsizeꢀ8Lꢀcontacts.

DetermineꢀtheꢀMiniatureꢀCylindricalꢀtype,ꢀshellꢀstyle,ꢀﬁnish,ꢀꢀ

service class and insert rotation required for your application.

Consult Amphenol, Sidney NY with the pertinent cable,

contact, insert arrangement and connector style choices for

complete connector part number.

B.

ꢀ

Socket Crimp Coax Contact

for use in Miniature Crimp SE Type Connectors

C.ꢀꢀ

ꢀ

D.

44

Coaxial Contacts

for miniature cylindrical connectors, cont.

Amphenol® Coaxial Contacts designed for use

TYPICAL MINIATURE CRIMP COAX

SOCKET CONTACT has crimp socket outer

contact with a solder pin inner contact

inꢀMiniatureꢀCylindricalꢀConnectorsꢀoﬀerꢀtheꢀsameꢀ

durabilityꢀadvantagesꢀandꢀdesignꢀbeneﬁtsꢀforꢀreliableꢀ

interconnection as the Amphenol coax contacts used

in high performance D38999 connectors. A variety

of military and commercial shielded cables are

accommodated within the miniature cylindrical series.

Amphenol supplies coax contacts for solder and crimp

SE connector styles.

Other features of the coax for miniature cylindricals include:

•

Miniature coax design has an outside nut within the

assembly for fast, reliable assembly of contact to

cable.

All types feature solder style inner contacts and

crimp style outer contacts for reliable cable

termination

•

Miniature coax crimp type contacts are designed for

use in Miniature crimp series connectors

Miniature coax solder type contacts are designed

for use in Miniature solder series connectors. These

come pre-installed into the solder connector.

TYPICAL MINIATURE CRIMP COAX PIN

CONTACT has crimp pin outer contact

with a solder socket inner contact

TYPICAL ELECTRICAL PERFORMANCE

Size 8 and 12 Coax Contacts

Contact Resistance:

Center @ 1 Amp, 170 millivolts max. voltage drop @ 25°C

Outer @ 12 Amps, 150 millivolts max. voltage drop @ 25°C

Dielectric Withstanding Voltage:

ꢀ

Sizeꢀ8:ꢀ1,300ꢀVACꢀRmsꢀ@ꢀseaꢀlevel

Sizeꢀ12:ꢀ1,000ꢀVACꢀRmsꢀ@ꢀseaꢀlevel

Sizeꢀ8ꢀ&ꢀ12:ꢀ250ꢀVACꢀRmsꢀ@ꢀ50,000ꢀft.

Insulation Resistance

5,000 megohms minimum @ 25°C

TypicalꢀVSWRꢀforꢀsizeꢀ8ꢀ&ꢀ12ꢀPT-SEꢀTypesꢀIIꢀ&ꢀIIIꢀonly:

1.2ꢀ+ꢀ.12Fꢀ(GHz)ꢀupꢀtoꢀ10ꢀGHz

ꢀ

EXPLANATION OF TYPE CLASSIFICATIONS:

PT-SE Type I

PT-SE Type II

is moisture seal design with internal O-ring.

is 50 ohm impedance matched version. Contacts

terminated to other than 50 ohm cables are therefore not matched.

PT-SE Type III is 50 ohm contact, non-serviceable after assembly.

Solders are non-impedance matched contacts.

CONTACT FINISHES:

SuﬃxꢀFinish

ꢀ

1ꢀ

2

3

4

5

E

0.00020ꢀmin.ꢀsilverꢀoverꢀcopperꢀﬂash

0.00005 min. gold (Knoop hardness 130-200) over silver

0.00010 min. gold (Knoop hardness 130-200) over silver

0.00010 min. gold (Knoop hardness 130-200) over copper

0.00005 min. gold (Knoop hardness 130-200) over nickel

0.00005 min. gold (Knoop hardness 90 max.) over copper

0.00005 min. gold (Knoop hardness 130-200) over copper

F

H

^{0.00010 min. gold (Knoop hardness 130-200) o}4^ve5^{r copper}

Coaxial Contacts

for miniature cylindrical connectors, cont.

solder (MIL-DTL-26482 Series 1 type) - application data

MATING

PIN DIA

H

L

F

G

SOCKET

L

H

F

MATING

G

PIN DIA

SOLDER COAX CONTACTS

For use in Miniature Solder Type Connectors: PT, SP, and MS/PT Styles

Dimensional Data

(See Drawings above)

Contact Part Number

Crimp Ferrule Tools

Retainer

Nut

Wrench

Contact

Size

Cable

F

MIL-T-22910/7-1

Tool

Use with Die Part

Number

MIL-C-22520/5-01

Tool

Use with Die Part

Number

MIL-C-22520/10-01

Tool

Use with Die Part

Number

L

H

Dia.

0.001

G

Dia.

Across

Flats

0.00ꢀ

Length Ref.

Socket

RG-58C/U,

RG-141A/U,

RG-303/U

0.040

0.001

M22520/5-05 (B)

M22520/5-41 (B)

21-33020-2

21-33019-2

8S

0.219

0.280

1.114

1.115

M22910/7-15 (B)

M22910/7-18 (B)

M22910/7-16 (B)

M22520/10-07 (B)

11-8676-2

11-8676-3

11-8678-2

0.040

0.001

RG-59B/U,

RG-62A/U,

RG-62B/U,

RG-210/U

21-33020-1

21-33020-3

21-33019-1

21-33019-3

8L

8S

0.219

0.280

1.176

1.114

1.177

1.115

M22520/5-45 (B)

M22520/5-43 (B)

0.040

0.001

RG-142B/U,

Times

MI51115

0.040

0.001

21-33020-7*

21-33020-32*

21-33019-7*

21-33019-32*

8S

0.219

0.140

0.280

0.172

1.114

1.092

1.115

1.093

RG-161/U,

RG-174A/U,

RG-179B/U,

RG-187A/U,

RG-188A/U,

RG-316/U

M22520/5-03 (A)

M22520/5-08 (A)

M22520/5-35 (B)

0.0300

0.0005

12S

M22910/7-12 (B)

M22520/10-05 (A)

11-8676-1

0.040

0.001

M22520/5-03 (B)

M22520/5-33 (B)

RG-178B/U

RG-196A/U

21-33020-4

21-33019-4*

8S

0.219

0.140

0.280

0.172

1.114

1.092

1.115

1.093

M22910/7-11 (B)

M22520/10-05 (B)

11-8676-2

11-8676-1

0.0300

0.0005

M22520/5-03 (B)

M22520/5-33 (B)

21-33020-31†

21-33061-31*†

12S

RG-180B/U,

RG-195A/U,

Raychem

0.040

0.001

M22520/5-05 (B)

M22520/5-41 (B)

21-33020-5*

21-33019-5*

8S

0.219

0.280

1.114

1.115

M22910/7-15 (B)

M22520/10-07 (B)

11-8676-2

5022D1312-9

Raychem

5021D1331-9

0.040

0.001

M22520/5-05 (B)

M22520/5-41 (B)

21-33020-6*

21-33020-33

21-33019-6*

21-33061-33

8S

0.219

0.140

0.280

0.172

1.114

1.092

1.115

1.093

M22910/7-15 (B)

M22910/7-13 (B)

11-8676-2

11-8676-1

Thermatics

2929-29

0.0200

0.0005

12S

M22520/5-37 (B)

NOTE: Contacts can be ordered by part numbers given in chart

* Consult Amphenol, Sidney NY for availability

NOTE:ꢀSizeꢀ8Sꢀandꢀ12Sꢀcontactsꢀareꢀusedꢀwithꢀconnector

CRIMPINGꢀTOOLS:ꢀItalicizedꢀlettersꢀinꢀparenthesisꢀthatꢀfollowꢀpositioner

part numbers indicate applicable die closure. Commercial

equivalents with the same die closure dimension may be used.

† 21-33020-31 and 21-33061-31 only mate with each other

ꢀ

insertsꢀthroughꢀshellꢀsizeꢀ18ꢀonly.ꢀForꢀlargerꢀconnectorꢀshell

sizes,ꢀuseꢀsizeꢀ8Lꢀcontacts.

CONTACT FINISH: For all contacts in this series feature

0.000050 minimum gold (Knoop hardness 130-200).

46

Coaxial Contacts

for miniature cylindrical connectors, cont.

crimp SE (MIL-DTL-26482 Series 1 type) - application data

L

F

G

H

G

H

MATING

PIN DIA

MATING

PIN DIA

F

SOCKET

NOTE:ꢀAllꢀcontactsꢀofꢀtheꢀsameꢀsizeꢀandꢀtheꢀsameꢀinnerꢀandꢀ

outer contact diameters (G & H) will mate with each other.

SE CRIMP COAX CONTACTS

For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, and MS/PT-SE Styles

Dimensional Data (See Drawings above)

Installation Tools

Contact Part Number

Crimp Ferrule Tools

Finish

on

Mating

Parts

L Length Ref.

Pin Socket

Contact

Size

Retainer Nut

Wrench

F

Cable

Type

H

Dia.

±±.±±0

MIL-T-2290±/7-0

Tool

Use with Die Part

Number

MIL-C-2252±/5-±0 MIL-C-2252±/0±-±

G

Dia.

Across

Flats

±±.±±ꢀ

Insertion

Removal

Tool

Socket

Use with Die Part

Number

Use with Die Part

Number

20-33±02-20

20-33±02-25

20-33±38-20

20-33±38-25*

20-33±00-20

20-33±00-25

20-33±37-20

20-33±37-25

8

I

II

I

2

ꢀ

RG-55B/U,

RG-0ꢀ2A/U,

RG-0ꢀ2B/U,

RG-223/U

±.±355

±±.±±0±

M2252±/5-±5 (A)

M2252±/5-09 (B)

00-8369-5 00-788±-8

00-866±-5 00-805ꢀ-0

±.208

±.28± 0.056 0.0ꢀꢀ M2290±/7-07 (B)

M2252±/0±-±7 (A)

M2252±/0±-±7 (B)

00-8676-2

II

20-33038-20( )* 20-33037-20( )*

20-33038-25( )* 20-33037-25( )*

8

I

II

**

20-33±02-22

20-33±02-26

20-33±38-22*

20-33±38-26*

20-33±00-22

20-33±00-26

20-33±37-22

20-33±37-26*

8

I

II

I

2

ꢀ

RG-58C/U,

RG-0ꢀ0A/U,

RG-3±3/U

±.±355

±±.±±0±

M2252±/5-±5 (B)

M2252±/5-ꢀ0 (B)

00-8369-ꢀ 00-788±-8

00-866±-ꢀ 00-805ꢀ-0

±.28± 0.056 0.0ꢀꢀ M2290±/7-05 (B)

II

20-33038-22( )* 20-33037-22( )

20-33038-26( )* 20-33037-26( )*

8

I

II

**

20-33±02-36

20-33±38-36*

20-33±00-36

20-33±37-36

8

II

2

ꢀ

RG-59B/U,

RG-62A/U,

RG-62B/U,

RG-20±/U

±.±355

±±.±±0±

00-8369-5 00-788±-8

00-866±-5 00-805ꢀ-0

±.208

±.28± 0.056 0.0ꢀꢀ M2290±/7-08 (B)

±.28± 0.056 0.0ꢀꢀ M2290±/7-07 (B)

M2252±/5-ꢀ5 (B)

00-8676-3

00-8676-2

20-33038-36( )* 20-33037-36( )

8

II

I

II

I

II

I

II

I

II

**

2

20-33±02-37*

20-33±38-37*

20-33±00-37*

20-33±37-37*

RG-0ꢀ±/U,

RG-3±2/U

±.±355

±±.±±0±

M2252±/5-±5 (A)

M2252±/5-09 (B)

00-8369-5 00-788±-8

00-866±-5 00-805ꢀ-0

ꢀ

M2252±/0±-±7 (A)

20-33038-37( )* 20-33037-37( )*

**

2

20-33±02-3ꢀ

20-33±02-3±

20-33±38-3ꢀ

20-33±38-3±

20-33038-3ꢀ( )* 20-33037-3ꢀ( )*

20-33038-3±( )* 20-33037-3±( )*

20-33±00-3ꢀ

20-33±00-3±

20-33±37-3ꢀ

20-33±37-3±

±.±355

±±.±±0±

00-788±-8

00-805ꢀ-0

ꢀ

**

2

±.208

±.028

±.28± 0.056 0.0ꢀꢀ

00-8676-2

00-8676-0

RG-060/U,

RG-07ꢀA/U,

RG-079B/U,

RG-087A/U,

RG-088A/U,

RG-306/U

M2252±/5-±3 (A)

M2252±/5-±8 (A)

M2252±/5-35 (B)

00-8369-2

00-866±-2

20-33±02-0

20-33±02-ꢀ

20-33±00-0

20-33±00-ꢀ

02

M2290±/7-02 (B)

M2252±/0±-±5 (A)

20-33±38-0*

20-33±38-ꢀ

20-33±37-0*

20-33±37-ꢀ*

02

I

II

±.±2±±

±±.±±±5

00-788±-02

00-805ꢀ-2

ꢀ

±.072 0.±92 0.±72

20-33038-0( )*

20-33038-ꢀ( )*

20-33037-0( )

20-33037-ꢀ( )*

02

I

II

**

20-33±02-35

20-33±38-35

20-33±00-35

20-33±37-35

8

I

2

ꢀ

±.±355

±±.±±0±

00-788±-8

±.208

±.028

±.28± 0.056 0.0ꢀꢀ

00-8676-2

00-8676-0

20-33038-35( )* 20-33037-35( )*

**

RG-078B/U,

RG-096A/U

M2252±/5-±3 (B)

M2252±/5-33 (B)

00-8369-0

00-866±-0

20-33±02-3*

20-33±02-5

20-33±38-3*

20-33±38-5

20-33038-3( )*

20-33038-5( )*

20-33±00-3*

20-33±00-5

20-33±37-3*

20-33±37-5*

20-33037-3( )*

20-33037-5( )*

02

I

II

I

II

I

M2290±/7-00 (B)

2

ꢀ

±.±2±±

± ±.±±±5

00-788±-02

00-805ꢀ-2

±.072 0.±92 0.±72

**

II

NOTE: Contacts can be ordered by part numbers given in chart

**ꢀSeeꢀﬁnishꢀoptionsꢀforꢀSEꢀcrimpꢀMiniatureꢀcontactsꢀlistedꢀonꢀꢀ

page 44. Replace the parenthesis of the contact part number with

theꢀﬁnishꢀsuﬃxꢀnumber.ꢀHowever,ꢀyouꢀshouldꢀconsultꢀAmphenol,ꢀ

Sidney,ꢀNYꢀregardingꢀtheꢀavailabilityꢀofꢀallꢀﬁnishꢀchoicesꢀforꢀeachꢀ

part number.

CRIMPINGꢀTOOLS:ꢀItalicizedꢀlettersꢀinꢀparenthesisꢀthatꢀfollowꢀ

positioner part numbers indicate applicable die closure.

Commercial equivalents with the same die closure dimension may

be used.

CHART CONTINUES ON NEXT PAGE

* Consult Amphenol, Sidney NY for availability

47

Coaxial Contacts

for miniature cylindrical connectors, cont.

crimp SE (MIL-MDL-26482 Series 1 type) - application data, cont.

SE CRIMP COAX CONTACTS

For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, and MS/PT-SE Styles

Dimensional Data

Installation Tools

Contact Part Number

Crimp Ferrule Tools

Finish

on

Mating

parts

Retainer

Nut

L Length Ref.

Pin Socket

Contact

Size

F

Cable

Type

H

Dia.

G

Dia.

Across

Wrench

MIL-T-2290±/7-0 ꢀ7MIL-C-2252±/5-±0 MIL-C-2252±/0±-±

Insertion

Removal

Flats

Tool

±±.±±0

±±.±±ꢀ

Socket

Use with Die Part

Number

Use with Die Part

Number

Use with Die Part

Number

20-33±02-2ꢀ

20-33±02-ꢀ6*

20-33±00-2ꢀ

20-33±00-ꢀ6*

8

I

II

2

ꢀ

RG-08±B/U,

RG-095A/U

20-33±38-2ꢀ

20-33±38-ꢀ6*

20-33±37-2ꢀ

20-33±37-ꢀ6*

8

I

II

±.±355

± ±.±±0±

M2252±/5-±5 (B)

M2252±/5-ꢀ0 (B)

00-8369-ꢀ

00-866±-ꢀ

00-788±-8

00-805ꢀ-0

±.208

±.028

±.28± 0.056 0.00ꢀ M2252±/7-05 (B)

M2252±/0±-±7 (B) 00-8676-2

20-33038-2ꢀ( )* 20-33037-2ꢀ( )*

20-33038-ꢀ6( )* 20-33037-ꢀ6( )*

8

I

II

**

Raychem

9527E0008,

RG-08±B/U,

RG-095A/U

±.±2±±

± ±.±±±5

Daniels GS2±± Tool with G2P33± or

M2252±/30-±0 Tool with Positioner M2252±/30-±2

00-788±-02

00-805ꢀ-2

20-330±6-ꢀ±( ) 20-330±5-ꢀ±( )

02

III

**

±.899 ±.879

00-867ꢀ-2

20-33±02-6*

20-33±02-7*

20-33±00-6*

20-33±00-7*

02

I

II

2

ꢀ

RG-088 or

RG-306

Double Braid

20-33±38-6*

20-33±38-7*

20-33±37-6*

20-33±37-7*

02

I

II

±.±2±±

± ±.±±±5

00-8369-2

00-866±-2

00-788±-02

00-805ꢀ-2

±.072 0.±92 0.±72

00-8676-0

20-33038-6( )* 20-33037-6( )*

20-33038-7( )* 20-33037-7( )*

02

I

II

M2290±/7-03 (B)

M2252±/5-37 (B)

**

20-33±02-ꢀꢀ

20-33±38-ꢀꢀ*

20-33±00-ꢀꢀ

20-33±37-ꢀꢀ*

8

II

I

2

ꢀ

Thermax

5±C-25ADS-0

±.±355

± ±.±±0±

00-8369-ꢀ

00-866±-ꢀ

00-788±-8

00-805ꢀ-0

±.028

±.28± 0.056 0.0ꢀꢀ

00-8676-2

20-33038-ꢀꢀ( )* 20-33037-ꢀꢀ( )*

**

2

20-33±02-28

20-33±38-28*

20-33±00-28

20-33±37-28*

RG-095

Double Braid

±.±355

± ±.±±0±

00-8369-ꢀ

00-866±-ꢀ

00-788±-8

00-805ꢀ-0

I

ꢀ

±.28± 0.056 0.0ꢀꢀ M2290±/7-06 (B)

M2252±/5-ꢀ3 (B)

20-33038-28( )* 20-33037-28( )*

I

**

20-33±02-23

20-33±02-27

20-33±00-23

20-33±00-27

8

I

II

2

ꢀ

RG-022/U,

Raychem

5±22E5000

20-33±38-23*

20-33±38-27

20-33±37-23*

20-33±37-27

8

I

II

±.±355

± ±.±±0±

M2252±/5-±5 (B)

M2252±/5-ꢀ0 (B)

00-8369-ꢀ

00-866±-ꢀ

00-788±-8

00-805ꢀ-0

20-33038-23( )* 20-33037-23( )*

20-33038-27( )* 20-33037-27( )*

8

I

II

±.208

±.28± 0.056 0.0ꢀꢀ M2252±/7-05 (B)

M2252±/0±-±7 (B) 00-8676-2

**

20-33±02-30

20-33±38-30

20-33±00-30

20-33±37-30

8

I

2

ꢀ

Raychem

953±D530ꢀ

20-33038-30( )* 20-33037-30( )*

I

**

2

20-33±02-39

20-33±38-39*

20-33±00-39

20-33±37-39*

II

Raychem

9527A0307

±.±355

± ±.±±0±

M2252±/5-±5 (B)

M2252±/5-ꢀ0 (B)

00-8369-ꢀ

00-866±-ꢀ

00-788±-8

00-805ꢀ-0

ꢀ

±.208

±.28± 0.056 0.0ꢀꢀ M2290±/7-05 (B)

±.28± 0.056 0.0ꢀꢀ M2290±/7-02 (B)

M2252±/0±-±7 (B) 00-8676-2

M2252±/0±-±5 (A) 00-8676-2

20-33038-39( )* 20-33037-39( )*

**

20-33±02-ꢀ±*

20-33±38-ꢀ±*

20-33±00-ꢀ±

20-33±37-ꢀ±*

8

II

2

M2252±/5-±3 (A)

M2252±/5-±8 (A)

M2252±/5-35 (B)

Raychem

7527A0308

±.±355

± ±.±±0±

00-8369-2

00-866±-2

00-788±-8

00-805ꢀ-0

8

II

ꢀ

**

2

20-33038-ꢀ±* 20-33037-ꢀ±( )*

20-33±02-ꢀ3

20-33±38-ꢀ3

20-33±00-ꢀ3

20-33±37-ꢀ3

02

Westrex

099-ꢀ9-0,

Tensolite

±.±2±±

± ±.±±±5

M2252±/5-±3 (B)

M2252±/5-33 (B)

00-8369-0

00-866±-0

00-788±-02

00-805ꢀ-2

ꢀ

±.028

±.072 0.±92 0.±72 M2290±/7-00 (B)

M2252±/0±-±5 (B) 00-8676-0

3±85±/87T-0

20-33038-ꢀ3( )* 20-33037-ꢀ3( )*

02

II

**

NOTE: Contacts can be ordered by part numbers given in chart

**ꢀSeeꢀﬁnishꢀoptionsꢀforꢀSEꢀcrimpꢀMiniatureꢀcontactsꢀlistedꢀonꢀpageꢀ44.ꢀ

Replaceꢀtheꢀparenthesisꢀofꢀtheꢀcontactꢀpartꢀnumberꢀwithꢀtheꢀﬁnishꢀsuﬃxꢀ

number. However, you should consult Amphenol, Sidney, NY regarding the

availabilityꢀofꢀallꢀﬁnishꢀchoicesꢀforꢀeachꢀpartꢀnumber.

CRIMPINGꢀTOOLS:ꢀItalicizedꢀlettersꢀinꢀparenthesisꢀthatꢀfollowꢀ

positioner part numbers indicate applicable die closure.

Commercial equivalents with the same die closure dimension

may be used.

* Consult Amphenol, Sidney NY for availability

48

Mounting Recommendations

for miniature cylindrical connectors

FLANGE MOUNTED CONNECTORS

AllꢀﬂangeꢀmountingꢀPTꢀconnectorsꢀuseꢀstandardꢀMSꢀmountingꢀdimensions.ꢀ

They cannot be back panel mounted due to coupling clearance. The PTB

(thru-bulkhead) type connector must also be back panel mounted on one side.

Flange gaskets are available for both series, see page 37.

FLANGE MOUNTED CONNECTORS

R (TP)

D Dia.

Shell Size

4 HOLES

No. 4 Screw

for PC & PT

No. 6 Screw

for SP and for

Size 24 PT

R

PT, PTB

.469

SP

PT

.323

SP, PTB

.439

.120 Dia. for Shell Sizes 6-22

PC & PT

(TP)

6

.641

.147 Dia. for

Size 24 PT

.150 Dia. for

SP only

8

.594

.734

.449

.563

10

12

14

16

18

20

22

24

.719

.812

.573

.680

D Dia.

.812

.938

.699

.859

.906

1.031

1.125

1.203

1.297

1.375

1.449

.823

.984

R

2

.969

.949

1.108

1.233

1.358

1.483

-

1.062

1.156

1.250

1.375

1.073

1.199

1.323

1.449

R

2

SECTION

CUT-OUT

JAM NUT MOUNTINGS

The jam nut design has become very popular because it allows bench wiring of

harnessꢀassemblies.ꢀTheꢀlaborꢀsavingꢀoftenꢀoﬀsetsꢀtheꢀaddedꢀcostꢀofꢀtheꢀjamꢀ

nut receptacle which is due to the self contained “O” ring and the extra nut.

R

+.010

-.000

B

+.000

-.010

P Panel Thickness

Min. Max.

.062 .125

F

.010

Shell Size

B

6

.447

.420

.286

.331

.375

.442

.486

.530

.573

.641

.685

-

R

8

.572

.542

.062

.125

.250

10

12

14

16

18

20

22

24

.697

.669

.884

.830

1.007

1.134

1.259

1.384

1.507

1.634

.955

1.084

1.208

1.333

1.459

1.575

CUT-OUT FOR

PT ONLY

SECTION

HERMETIC RECEPTACLE MOUNTINGS

HERMETIC RECEPTACLES

Shell

Size

N

Max.

This series must be mounted in such a way as to preserve the

hermetic seal provided by the glass insert. Mounting data for

box and jam nut receptacles is given above. Cut-out required for

solder mounting receptacles (N) is given below.

6

.458

N

8

10

.582

.692

Theꢀﬁnishꢀofꢀeachꢀofꢀtheseꢀhermeticꢀreceptaclesꢀisꢀfusedꢀelectro-

deposited tin for easy solderability, and protected by a special

lacquer for optimum shelf life. The lacquer will not interfere with

any soldering operation.

12

.801

14

16

18

20

22

24

.926

1.051

1.176

1.395

1.375

1.520

Low temperature solder should be used and the addition of a

solderꢀﬁlletꢀatꢀarrowꢀpointsꢀonꢀdrawingꢀatꢀrightꢀisꢀrecommended.

Careꢀmustꢀbeꢀtakenꢀthatꢀtheꢀoperatingꢀtemperatureꢀofꢀtheꢀﬁnalꢀ

assembly does not rise above the melting point of tin (440° F).

JAM NUT

RECEPTACLE

(See dimensions

above)

BOX

SOLDER

RECEPTACLE

CUT-OUT

RECEPTACLE

(See dimensions

above)

49

Other Amphenol Miniature Cylindrical

Connectors

Geophysical Miniature Cylindricals

Designed for the Geophysical industry’s rugged

environments, the Amphenol® RPT Series connector

has custom features that provide reliability in extreme

temperature and moisture conditions.

The unique shell design provides stronger shells along

withꢀanꢀanodizedꢀ(non-conductive)ꢀﬁnishꢀforꢀgreaterꢀ

salt, corrosion and abrasion resistance. Coupling nuts

are manufactured with round detent holes and are sold

separatelyꢀforꢀgreaterꢀcustomerꢀﬂexibility.

Seeꢀproductꢀdataꢀsheetꢀ#146.

RJ Field Bayonet Cylindricals

Amphenol PCD division provides MIL-DTL-26482 bayonet

coupling cylindrical connectors with an RJ45 Ethernet

interface*. These are designed for use in all levels of harsh

environments from industrial to mil-aero applications

providingꢀIP67ꢀprotectionꢀfromꢀdust,ꢀﬂuids,ꢀvibration,ꢀshockꢀ

and traction. The Amphenol® RJ Field allows the use of

Ethernet Class D/Cat 5 and Cat 5e connections for 10 BaseT,

100 Base TX, or 1000 BaseT networks. It works with any

standardꢀRJ45ꢀcordsetꢀwithꢀnoꢀextraꢀtooling.ꢀItꢀalsoꢀoﬀersꢀ

reinforced EMI protection.

Forꢀmoreꢀinformationꢀgoꢀonlineꢀtoꢀwww.rjﬁeld.comꢀorꢀaskꢀforꢀ

the Field Series brochure.

* RJ Field Bayonet and other Field Series products are available through

AmphenolꢀPCD.ꢀTheseꢀincludeꢀRJFꢀTVꢀwithinꢀMIL-DTL-38999ꢀSeriesꢀIIIꢀ

threaded coupling connectors, and RJF 544 within ECTA push-pull plastic

shell coupling.

50


型号：	MS3127E14-15PX
厂家：	Amphenol
描述：	MIL Series Connector, 15 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle
文件：	总52页 (文件大小：5826K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MS3127E14-15PX [AMPHENOL]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB