MS3128E16-26SY [AMPHENOL]
MIL Series Connector, 26 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle;型号: | MS3128E16-26SY |
厂家: | Amphenol |
描述: | MIL Series Connector, 26 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle |
文件: | 总52页 (文件大小:5826K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
Amphenol
PT Series
Miniature Cylindrical Connectors
12-070-19
www.amphenol-industrial.com
If more information is needed concerning
the connectors covered in this publication,
or if there are special application needs,
please contact:
Table of Contents Page
Introduction, Amphenol® Miniature Cylindrical
General Information, Design Flexibility . . . . . . . . . . . . . . 1, 2
Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . 3
Insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 5
Alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Insert arrangement patterns . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
PT, SP, MS/PT Proprietary/MIL-DTL-26482, Series 1
Amphenol Corporation
Amphenol Industrial Operations
191 Delaware Avenue
Sidney, New York 13838-1395
Telephone: 888-364-9011
Bayonet Coupling, Solder Contacts
Fax: 520-397-7169
ꢀ
GeneralꢀInformation,ꢀSpecifications,ꢀServiceꢀClassꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ11,ꢀ12
PT00 (MS3110), SP00 wall mounting receptacle . . . . . . . . . 13
PT01 (MS3111) cable connecting receptacle . . . . . . . . . . . .14
PT02 (MS3112) SP02 box mounting receptacle . . .. . . . . . . .15
PT06 (MS3116) SP06 straight plug . . . . . . . . . . . . . . . . . .16
PT07 (MS3114) SP07 jam nut receptacle . . . . . . . . . . . . . . . . . . . 17
PT08E, SP08E 90 degree plug . . . . . . . . . . . . . . . . . . . . .18
PT Connectors with Printed Circuit Board Contacts -
Please go to the Amphenol websites to
view, download and save this catalog and
most all of Amphenol interconnection
product literature.
www.amphenol-industrial.com
Some miniature connector styles are
available in RoHS Compliant versions.
Please contact Amphenol Industrial
Operations for more information.
box mount receptacle, jam nut receptacle . . . . . . . . . . . . . . . . . . .19
PTB, SPB thru bulkhead receptacle . . . . . . . . . . . . . . . . . . . . . . . . .20
GeneralꢀInformation,ꢀSpecificationsꢀ-ꢀPTꢀhermeticꢀꢀꢀꢀꢀ.ꢀꢀ.ꢀꢀ.ꢀꢀ.ꢀꢀ.ꢀꢀꢀ.ꢀ.ꢀ21
PTIH (MS3113H) hermetic solder mounting receptacle . . . . . . 22
PT02H hermetic box mounting receptacle . . . . . . . . . . . . . 23
PT07H (MS3114H) hermetic jam nut receptacle . . . . . . . . . .24
PT, SP, MS/PT how to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
ꢀ
PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-DTL-26482, Series 1
Bayonet Coupling, Crimp Contacts
ꢀ
GeneralꢀInformation,ꢀSpecifications,ꢀServiceꢀClassꢀꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ.ꢀ.26,ꢀ27
PT00SE (MS3120), SP00SE wall mounting receptacle . . . . . . . . .28
MF00SE (MS3128) wall mounting receptacle . . . . . . . . . . . . . . . . .29
PT01SE (MS3121) SP01SE cable connecting receptacle . . . . . .30
PT02SE (MS3122) SP02SE box mounting receptacle . . . . . . . 31
MF02SE (MS3127) box mounting receptacle . . . . . . . . . . . . . . . .. 32
PT06SE (MS3126), SP06SE straight plug . . . . . . . . . . . . . . 33
PT07SE (MS3124) SP07SE jam nut receptacle . . . . . . . . . . 34
PT08SE, SP08SE 90 degree plug . . . . . . . . . . . . . . . . . . 35
PT-SE, SP-SE, MS/PT-SE how to order . . . . . . . . . . . . . . . . 36
Amphenol operates Quality Systems
thatꢀareꢀcertifiedꢀtoꢀISOꢀ9001:2015;ꢀISOꢀ
14001:2015;ꢀISO/TSꢀ16949:2016ꢀbyꢀthirdꢀ
party registrars.
NOTE:
The connector products in this brochure
were formerly known as Bendix®
products. These products are now
manufactured and sold under the
Amphenol® brand name. The name
“Amphenol” will replace the name “Bendix”
on products and literature in the future.
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-40
Glands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Application tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Contacts, Power and Thermocouple Crimp . . . . . . . . . . . . . . . . . 43
Contacts, Shielded Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-48
Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .49
Other Amphenol Miniature Cylindrical Connectors . . . . . . . . . . . . . . . . . . 50
NOTE:
Proprietary/MIL-DTL-26482 Series 1 connectors covered in this
catalog are widely used in general duty and environmental
applications, both industrial and military. Markets that use this
family of connectors include:
The Miniature MIL-DTL-26482, Series
2 connectors PTS-DR and MS/PTS-DR
(formerly in this catalog) are no longer
supplied with these designations.
Amphenol now supplies the Amphenol®/
Matrix® MIL-DTL-26482, Series 2. (Military
numbers include MS3470 - MS3472,
MS3474, - MS3476).
• Instrumentation
• Monitoring Equipment
• Machine Tool, Factory Automation
• Communications
• Geophysical
• Industrial Controls and Robotics
• Oil and Petrochemical Industries
• Rail/Mass Transit
• Military/Aerospace
Amphenol® Miniature Cylindrical Connectors
Proprietary/MIL-DTL-26482, Series 1
Amphenol®ꢀMiniatureꢀCylindricalꢀconnectorsꢀofferꢀtwiceꢀtheꢀnumberꢀofꢀcontactsꢀinꢀjustꢀhalfꢀtheꢀsizeꢀofꢀaꢀStandardꢀ
connector. These miniature connectors, are available in several series, each with varying design characteristics
andꢀcustomerꢀoptionsꢀtoꢀmeetꢀcostꢀconsiderationsꢀandꢀprovideꢀmaximumꢀdesignꢀflexibility.ꢀThereꢀareꢀtwoꢀstylesꢀ
withinꢀtheꢀfamilyꢀthatꢀareꢀMSꢀapprovedꢀandꢀqualifiedꢀtoꢀMIL-DTL-26482,ꢀSeriesꢀ1,ꢀandꢀinꢀadditionꢀthereꢀareꢀseveralꢀ
proprietary styles.
Common features of all styles:
•
•
•
All are for general duty applications and environmental sealing is achieved with the grommet and clamp design.
Operatingꢀtemperatureꢀisꢀfromꢀ–55°Cꢀtoꢀ+125°;ꢀOperatingꢀvoltageꢀtoꢀ1000ꢀVACꢀ(RMS)ꢀatꢀseaꢀlevel.
Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and
provideꢀanꢀindefiniteꢀshelfꢀlife.
All have resilient inserts which provide high dielectric strength and moisture barrier.
Aꢀvarietyꢀofꢀshellꢀfinishesꢀ(includingꢀnon-cadmium)ꢀandꢀaꢀvarietyꢀofꢀback-endꢀaccessoriesꢀareꢀavailableꢀwithinꢀtheꢀ
styles.
•
•
Bayonet Coupling with Solder Contact Termination
PT, MS/PT (solder)
Options
•
•
•
MS and proprietary versions
Factory installed solder contacts
3 point bayonet coupling and 5 key/key-
way mating.
•
•
•
•
•
7 shell styles with 60 insert
patterns
Hermetic seal (glass fusion)
receptacle styles available
Pressurizedꢀthruꢀbulkheadꢀ
receptacle style available
Per-installed coax solder con-
tacts are available
•
•
•
Intermateable with all miniature series
connectors.
MS/PT meets MIL-DTL-26482 Series 1,
service classes E, F and P.
MS/PTꢀisꢀULꢀrecognized.
PT Solder
jam nut receptacle and
mated straight plug
Printed circuit board contacts
are available
SP (solder)
•
SPꢀSeriesꢀisꢀaꢀmodificationꢀofꢀtheꢀPTꢀwithꢀ
sameꢀfeaturesꢀexceptꢀaꢀwiderꢀflangeꢀforꢀ
back panel mounting
Bayonet Coupling with Crimp Contact Termination
PT-SE, MS/PT-SE (crimp)
Options
•
•
MS and proprietary versions
Crimp rear insertable/front release
contact termination. (closed entry socket
insert prevents probe damage).
3 point bayonet coupling and 5 key/key-
way mating.
•
6 shell styles with 47 insert
PT Solder
wall mount receptacle
patterns
•
Coax and thermocouple con-
tacts are available
•
•
•
Intermateable with all miniature series
connectors.
MS/PT-SE meets MIL-DTL-26482 Series 1,
service classes E, F, P.
SP-SE (crimp)
•
ModificationꢀofꢀtheꢀPT-SEꢀwithꢀwiderꢀ
flangeꢀforꢀbackꢀpanelꢀmounting
PT-SE Crimp
wall mount receptacle
and mated straight plug
1
Amphenol Miniature Cylindrical
designꢀflexibilityꢀ
The large family of miniature proprietary and MS style connectors provides for
many optional features and designs. In addition to the choices of bayonet or threaded
shells, solder or crimp termination within the style variations, there are additional
options that are shown here.
Hermetics
Hermetically sealed receptacles have fused compression
glass sealed inserts which provide environmental moisture
sealing. There are three hermetic styles within the PT
bayonet series.
Coaxial Contacts
Amphenol Miniature connectors can incorporate shielded
coaxꢀcontacts.ꢀSizeꢀ8ꢀandꢀ12ꢀcrimpꢀcoaxꢀcontactsꢀareꢀ
PT Connector with Hermetic
PT Connector with PC Tail
Contacts
availableꢀinꢀPT-SE,ꢀSP-SE,ꢀMS/PT-SE.ꢀFactoryꢀinstalledꢀsizeꢀ8ꢀ
Seal Insert and Coax
and 12 solder type coax contacts are available in PT, SP,
Contacts
MS/PT connectors. See coax contact information pages at
the end of this catalog.
Printed Circuit Board Tail Contacts
PT bayonet connectors in box mounting receptacle and jam nut receptacle styles are
available with printed circuit board contacts. Standard PCB tails for MIL-DTL-26482
connectors have gold plating, .0050 inches over nickel. See page 20 and call Amphenol
for further information.
Flex Circuitry
Flex termination assemblies for attaching cylindrical connectors to printed circuit
boards are available through the Amphenol division ACT, Advanced Circuit
Technology. Flex can be used with miniature 26482 connectors and it can be designed
toꢀmeetꢀspecificꢀlength,ꢀcurrentꢀcarryingꢀcapacityꢀandꢀtoꢀfitꢀtheꢀpreciseꢀgeometricꢀ
shape of the connector to board package. Flex circuity plugs into a printed circuit
board and creates a self-locking terminal pad which eliminates the need for an
additional interconnect to the PCB.
PT Connector with Flex
Filter Protection
AmphenolꢀoffersꢀtheꢀFPTꢀSeriesꢀwhichꢀcombinesꢀtheꢀminiatureꢀPTꢀseriesꢀwithꢀanꢀEMI
filter.ꢀDesignedꢀtoꢀprovideꢀEMIꢀprotectionꢀforꢀsensitiveꢀcircuits,ꢀeachꢀcircuitꢀisꢀ
individuallyꢀfilteredꢀwithinꢀtheꢀconnector,ꢀeliminatingꢀtheꢀneedꢀforꢀcostlyꢀandꢀbulkyꢀ
exteriorꢀnetworkꢀfilters.ꢀFilterꢀcontactsꢀareꢀavailableꢀinꢀMF,ꢀHF,ꢀVHF,ꢀandꢀUHFꢀrangesꢀ
and are intermateable and intermountable with MIL-DTL-26482 connectors. For
further information see catalog 12-120, Amphenol EMI Filter Transient Protection
Connectors.
PT Connector with EMI
Filter Protection
Overmolded Cable
Overmold seals and cables can be designed for almost any industrial application.
Aꢀvarietyꢀofꢀmaterialsꢀareꢀavailable:ꢀneoprene,ꢀhypalonꢀandꢀothers;ꢀandꢀaꢀvarietyꢀof
lengthsꢀcanꢀbeꢀdesignedꢀtoꢀmeetꢀcustomerꢀspecifications.ꢀOvermoldꢀsealsꢀtoꢀtheꢀrearꢀ
of the connector and to the cable jacket providing moisture sealing.
PT Connector with
Overmolded Cable
2
Amphenol Miniature Cylindrical
connector selection guide
The accompanying chart is provided to assist the user in selecting the appropriate type of miniature connector to
meetꢀtheꢀapplicationꢀrequirements.ꢀFurtherꢀinformationꢀcanꢀbeꢀfoundꢀinꢀspecificꢀsectionsꢀofꢀthisꢀcatalog.
Solder
Crimp
MS/ PT-SE
CHARACTERISTICS
Intermateable†
Contacts
PT
O
•
MS/PT
SP
O
PT-SE
O
O
•
O
Solder
•
Crimp Ri/FR
Non-Removable
Removable
Bayonet
•
•
•
•
•
•
Contact Retention System
Coupling
•
•
•
•
•
•
•
•
Olive Drab Cadmium (003)
Anodic Coated (005)
•
•
Standard Finishes††
•
•
Temperature Range
•
•
•
•
•
•
Resilient Dielectric (-55°C to +125°C)
Wide Mounting Flange
Hermetic Seal
•
•
SHELL STYLE AVAILABILITY
Wall Mounting Receptacle “00”
•
•
•
•
•
•
•
•
•
•
**•
•
Cable Connecting Receptacle “01”***
Box Mounting Receptacle “02”
Straight Plug “06”
*•
•
•
•
•
•
•
**•
•
•
Jam Nut receptacle “07”
thru-bulkhead Receptacle “TB”
Solder Mount Receptacle “I”
90° Plug “08”
*•
•
* •
•
*•
•
* •
•
•
RI/FR = Rear Insertion/Front Releasable
† o intermates with o
††ꢀOptionalꢀfinishesꢀavailable.ꢀSeeꢀ“howꢀtoꢀorder”ꢀsections.
* Available in hermetic version
** Dual mounting holes
*** This connector style is sometimes referred to as a cable connecting “plug.”
It does, however, mate with either a straight or 90 degree plug.
3
Amphenol Miniature Cylindrical
insert availability
Crimp
Screw
Solder Termination
Contact Size
Termination Termination
Insert
Total
Arrangement
Contacts
Hermetic
PT
MS-PT
MS/PT-SE
PT-SE
SP-SE
Coax
Service
Rating
MS/PT
PT
SP
PT
20 16 12 10
8
12
8
6-1
8-2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
S
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
S
X
X
X
X
X
X
X*
X
1
2
1
2
3
4
3
3
2
5
6
7
I
X
X
X
X
I
8-3
X
3
I
8-4
X
4
I
8-33
X
X
X
X
3
I
8-98
3
I
10-2
2
I
10-5
X*
X
5
I
10-6
X
6
I
10-7
X
7
I
10-70
10-98
12-3*
12-4
1
1
Coax
X
X
X*
X
6
6
I
3
3
II
X*
X*
X
4
4
I
12-8
X
X
X
X
8
8
I
12-10
12-14
12-98
14-2
10
14
10
2
10
14
10
2
I
I
I
II
14-4
X
X
4
4
I
14-5
X
X
5
5
II
14-8
8
6
8
2
I
14-12
14-15
14-18
14-19
14-22
14-71
14-91 HV
14-AA
16-8
X
X
X
X
X
X
X
X
12
15
18
19
5
4
1
I
14
18
19
1
I
X*
X
X
I
X
I
X*
4
4
I
P
S
X
X
X
X
X
X
X
X
X
X
X
X
4
3
I
X*
3
3
1
**
X
X
4
I
X
X
X
X
X
X
8
8
1
II
16-23
16-26
16-70
16-76†††
16-99
18-2
23
26
15
14
23
2
22
26
14
8
I
X
I
1
5
N/A
X*
X
1
***
I
X
X
X
X
X
X
X
X
X
21
2
X
X
2
II
II
II
I
18-3
X
3
3
18-5
X*
5
5
8
18-8
8
18-11
18-30
X
X
X
X
X
X
X
X
X
11
30
11
1
II
I
X*
29
*Not available in MS version
P designates Pin insert only.
†Sizeꢀ12ꢀcontactsꢀforꢀ#10ꢀwire
††Not presently tooled
**Flashoverꢀvoltageꢀ5,000ꢀVACꢀ(RMS)
***1500ꢀVACꢀ(RMS)
4
S designates Socket insert only.
†††Contacts must be ordered separately
Amphenol Miniature Cylindrical
insert availability, cont.
Solder Termination
Crimp Termination
Contact Size
Coax
Insert
Total
Contacts
Hermetic
PT
MS-PT
MS/PT-SE
PT-SE
SP-SE
Service
Rating
Arrangement
MS/PT
PT
SP
20
16
12
12
8
18-32
18-71
18-72
18-75
18-76
18-80
18-91 HV
20-16
20-24
20-25
20-26
20-27
20-39
20-41
20-70
20-90 HV
22-7
X
X
X
X
X
32
9
32
I
X*
8
1
Coax, II
X
X
X
X
14
4
10
4
3
N/A
4
1
2
Coax
4
II
X
X
8
6
6
Coax, I
X*
X
6
**
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
16
24
25
26
27
39
41
14
7
16
II
24
25
26
27
39
41
10
7
I
I
6
I
X
X
X
I
X
X
X
X
2
I
I
4
7
Coax
X
X
X
X
X
X
Hi-Voltage
X*
X
7
Coax
22-21
22-25
22-32
22-34
22-36
X
X
X
21
25
32
34
36
21
25
II
I
X*
X
X
X
X
X
X
X
32
34
36
I
I
I
22-41
22-55
X
X
X
X
X
X
X
X
X
X
X
X
41
55
19
9
27
55
13
2
14
I
I
22-70
6
7
3
7
I, Coax
22-71
I, Coax
22-72
X
X
X
X
19
7
12
4
31
2
N/A
X*
X*
Coax
22-78†††
22-96
7
II
7†
24-31
31
51
61
49
1
I
X*
X
47
61
45
1
4
I
I
24-51†††
24-61
X
X
X
X
X
X
24-71
2
5
N/A
Coax
24-79
*Not available in MS version
**Flashoverꢀvoltageꢀ5,000ꢀVACꢀ(RMS)
***1500ꢀVACꢀ(RMS)
†Sizeꢀ12ꢀcontactsꢀforꢀ#10ꢀwire
††Not presently tooled
†††Contacts must be ordered separately
5
Amphenol Miniature Cylindrical
alternate positioning
Alternate Positioning
To avoid cross-plugging problems in applications requiring the use of
moreꢀthanꢀoneꢀminiatureꢀcylindricalꢀconnectorꢀofꢀtheꢀsameꢀsizeꢀandꢀ
arrangement, alternate insert rotations are available as indicated in the
accompanying chart.
As shown in the diagram at right, the front face of the pin insert is
Position W
Position X
Position Y
Position Z
rotated within the shell in a clockwise direction from the normal shell
key. The socket insert would be rotated counterclockwise the same
number of degrees in respect to the normal shell key.
Viewsꢀlookingꢀintoꢀfrontꢀfaceꢀofꢀpinꢀinsertꢀorꢀrearꢀofꢀsocketꢀinsert.
Insert Rotation
Insert Rotation
Degrees
Degrees
Shell
Size
Insert
Arrangement
Shell
Size
Insert
Arrangement
W
-
X
Y
-
Z
W
55
180
62
180
85
18
53
45
-
X
Y
Z
6
6-1
8-2*
-
122
210
97
-
-
18
18
18
18
18
18
18
18
18
18
18
20
20
20
20
20
20
20
20
20
22
22
22
22
22
22
22
22
22
22
22
22
22
24
24
24
24
24
18-5
18-8
97
-
263
-
315
-
8
58
60
45
90
-
-
-
8
8-3
-
-
18-11*
18-30*
18-32*
18-71
18-72
18-75
18-76
18-80
18-91HV
20-16*
20-24
20-25
20-26
20-27
20-39*
20-41*
20-70
20-90
22-7
119
193
138
108
102
-
241
285
222
127
213
-
340
350
265
215
293
-
8
8-4*
184
-
-
8
8-33*
8-98
-
8
-
-
-
10
10
10
10
10
10
12
12
12
12
12
12
14
14
14
14
14
14
14
14
14
14
14
14
16
16
16
16
16
16
18
18
10-2
45
45
90
90
-
90
151
-
315
180
-
-
10-5*
10-6*
10-7
270
-
-
-
-
-
-
-
45
90
238
70
72
13
72
63
45
63
45
19
16
60
72
62
72
39
30
30
33
42
19
19
90
22
90
39
-
90
135
240
333
215
216
210
216
252
225
222
225
-
160
270
347
290
288
322
288
333
-
10-70
10-98*
12-3
-
-
-
180
318
145
144
107
144
144
126
135
135
41
90
-
180
-
240
180
-
270
-
12-4*
12-8
38
90
60
-
-
-
292
295
-
112
155
-
203
270
-
12-10*
12-14
12-98*
14-2
61
58
45
40
48
43
17
15
30
45
-
135
122
-
189
-
340
-
335
315
-
14-4*
14-5*
14-8
-
-
92
162
90
110
90
165
-
184
189
-
273
312
-
22-21*
22-25
22-32
22-34
22-36
22-41
22-55*
22-70
22-71
22-72
22-78
22-96*
24-31
24-51
24-61*
24-71
24-79
135
125
145
142
144
135
142
82
175
211
215
218
216
264
226
218
236
277
-
349
336
288
298
288
-
14-12*
14-15*
14-18*
14-19*
14-22
14-71
14-91HV
14-AA*
16-8*
16-23
16-26*
16-70
16-76
16-99*
18-2
155
180
315
-
234
270
-
-
-
-
-
314
312
270
339
-
-
60
-
-
-
45
54
158
60
41
-
-
-
191
200
41
152
270
-
180
-
331
-
275
216
-
338
286
-
41
-
-
122
-
225
171
180
131
-
255
313
270
205
-
-
-
66
58
-
156
122
-
223
-
340
-
324
281
-
18-3
180
-
6
* Available in Hermetic Class
Amphenol Miniature Cylindrical
insert arrangements
D
C
C
A
B
A
A
C
A
A
C
B
B
A
B
B
B
Insert Arrangement
Service Rating
6-1
I
8-2
8-3
I
8-4
I
8-33
8-98
10-2
I
I
I
I
Number of Contacts
Contact Size
1
2
3
4
3
3
2
20
20
20
20
20
20
16
A
A
F
A
F
E
A
C
A
E
B
D
B
B
E
D
B
C
D
C
C
C
D
B
Insert Arrangement
Service Rating
10-5
10-6
10-7
10-70
COAX
1
10-98
12-3
II
12-4
I
I
I
I
I
Number of Contacts
Contact Size
5
6
7
6
3
4
20
20
20
8 COAX
20
16
16
B
A
C
A
E
H
B
G
A
A
A
E
B
F
H
D
C
A
B
H
G
B
C
E
G
K
J
C
L
F
B
D
M
H
D
C
K
J
K
E
C
J
R
F
D
F
D
E
D
N
P
Insert Arrangement
Service Rating
12-8
12-10
12-14
12-98
14-2
II
14-4
14-5
II
I
I
I
I
I
Number of Contacts
Contact Size
8
10
20
14
20
10
20
2
4
5
20
12
12
16
A
A
L
A
M
A
E
A
D
H
A
L
A
B
B
N
K
L
H
B
D
N
J
L
P
M
K
M
N
B
B
G
B
K
C
C
D
B
J
V
U
T
U
F
K
R
J
T
P
C
R
M
C
G
C
S
R
D
H
D
P
F
H
D
J
S
F
C
F
E
G
E
H
G
E
E
D
C
G
F
E
Insert Arrangement
Service Rating
14-8
I
14-12
I
14-15
I
14-18
14-19
14-22
I
14-71
I
I
I
Number of Contacts
Contact Size
6
2
8
4
14
20
1
18
20
19
20
1
4
3
1
20
12
20
16
16
20
12
16
8 COAX
7
Amphenol Miniature Cylindrical
insert arrangements
A
P
R
S
A
A
N
Y
B
P
A
T
A
R
B
M
C
F
N
S
G
B
a
U
b
D
C
Z
L
D
H
X
T
M
c
F
C
Z
V
D
B
K
E
L
C
U
B
W
Y
W
E
X
J
V
K
C
E
D
F
H
G
J
G
H
Insert Arrangement
Service Rating
14-91HV
14-AA
I
16-8
II
16-23
I
16-26
I
Flashover
5,000 VAC (RMS)
Number of Contacts
Contact Size
3
4
8
22
20
1
26
20
20
12
16
16
A
A
R
A
B
P
B
K
H
P
S
T
C
L
N
N
J
B
C
G
U
P
Y
Z
D
N
J
M
F
X
V
D
C
H
M
E
R
W
L
K
M
G
E
F
K
D
E
L
G
J
F
H
Insert Arrangement
Service Rating
16-70
N/A
16-76
Flashover
16-99
I
18-2
II
18-3
II
1,500 VAC (RMS)
Number of Contacts
Contact Size
14
20
1
8
1
5
21
20
2
2
8
3
12 COAX
20
12*
2 COAX
16
10
*Contact Positions Optional
A
A
S
B
J
A
R
C
T
d
G
B
A
P
H
G
B
c
U
D
F
e
K
L
E
B
H
b
N
V
E
f
g
a
W
M
D
C
F
C
C
X
Z
Y
L
G
F
D
K
H
E
D
J
E
Insert Arrangement
Service Rating
18-5
II
18-8
18-11
II
18-30
I
I
Number of Contacts
Contact Size
5
8
11
29
20
1
12
12
16
16
T
A
A
S
H
B
B
R
U
K
A
e
L
V
C
J
P
f
J
B
d
W
D
A
B
G
C
D
j
N
g
P
M
C
X
c
E
C
M
h
H
Y
b
N
F
L
G
D
a
Z
F
D
G
K
F
E
E
H
J
Insert Arrangement
Service Rating
18-32
18-71
18-72
N/A
18-75
COAX
4
I
II, COAX
Number of Contacts
Contact Size
32
20
8
1
10
20
4
16
8 COAX
12 COAX
8 COAX
8
Amphenol Miniature Cylindrical
insert arrangements
L
S
A
N
K
A
B
A
A
F
M
H
B
B
D
C
J
R
P
G
C
E
B
C
D
H
F
D
G
E
D
C
E
F
Insert Arrangement
Service Rating
18-76
II
18-80
18-91 HV
Flashover
20-16
II
I, COAX
5,000 VAC (RMS)
Number of Contacts
Contact Size
3
1
6
2
6
16
16
12 COAX
8 COAX
20
8 COAX
20
A
A
R
R
B
B
U
A
L
A
M
V
P
P
X
S
C
a
C
S
T
B
S
C
N
D
W
K
N
N
B
X
R
D
b
Y
a
Z
D
a
c
W
b
T
T
E
W
M
a
Y
M
L
V
P
d
c
P
E
E
b
Z
J
C
Y
U
N
F
Z
X
J
L
U
Z
V
F
H
U
F
R
E
M
G
X
V
D
L
H
K
G
T
S
W
H
Y
K
G
G
K
H
J
J
F
Insert Arrangement
Service Rating
20-24
20-25
20-26
I
20-27
I
I
I
Number of Contacts
Contact Size
24
20
25
20
20
20
6
27
20
12
A
B
W
K
A
A
W
C
V
X
k
B
L
U
V
i
J
B
X
j
D
Y
j
Y
C
a
A
T
U
k
i
E
Z
Z
s
m
M
D
P
S
m
r
T
h
g
G
B
h
t
a
F
E
r
n
R
S
G
g
b
F
b
q
n
d
p
p
q
e
P
R
H
C
H
F
C
f
c
c
f
E
D
G
N
P
G
D
d
e
L
J
N
H
M
N
F
E
K
J
M
K
L
Insert Arrangement
Service Rating
20-39
I
20-41
20-70
COAX
20-90
I
HI-VOLTAGE
Number of Contacts
Contact Size
37
20
2
41
20
10
4
7
16
20
8 COAX
20
A
P
N
A
A
A
N
R
Z
P
j
N
B
b
R
M
B
F
E
B
P
X
B
M
Z
Y
S
a
C
M
K
c
S
h
W
R
L
G
D
C
L
C
T
X
g
d
T
a
b
L
D
C
K
D
V
S
K
D
e
f
W
U
Y
U
V
E
E
U
T
J
J
E
X
V
W
J
F
H
H
F
F
G
H
G
G
Insert Arrangement
Service Rating
22-7
COAX
7
22-21
II
22-25
22-32
I
I
Number of Contacts
Contact Size
21
25
16
32
20
8 COAX
16
9
Amphenol Miniature Cylindrical
insert arrangements
A
V
p
U
A
A
T
A
T
Y
B
T
B
S
B
V
Z
S
C
S
B
X
C
n
U
W
U
a
n
k
R
e
f
C
V
m
X
W
D
AA
d
C
k
Y
Z
a
m
q
R
j
b
D
g
n
R
BB
e
V
m
l
P
z
y
r
s
h
W
X
E
D
CC
GG
FF
c
k
W
f
t
q
f
c
j
i
HH
EE
P
i
E
F
l
P
D
U
s
F
N
DD
p
r
E
d
j
N
N
b
t
X
g
T
j
E
h
d
G
b
x
M
u
g
h
Z
k
e
F
h
c
S
w
v
c
Y
H
M
Y
a
F
g
M
d
G
b
Z
R
L
G
a
f
J
e
L
L
H
G
P
K
J
H
K
K
K
N
L
H
J
J
M
Insert Arrangement
Service Rating
22-34
22-36
22-41
I
22-55
I
I
I
Number of Contacts
Contact Size
34
20
36
20
27
20
14
16
55
20
A
A
A
A
V
F
H
J
M
B
K
B
F
B
F
B
C
S
L
T
J
C
U
N
G
L
C
E
G
V
U
P
M
K
T
D
P
R
N
J
H
D
S
R
E
G
E
E
C
H
F
G
D
D
Insert Arrangement
Service Rating
22-70
22-71
I, COAX
22-72
N/A
4
22-78
COAX
7
i, COAX
Number of Contacts
Contact Size
12
20
6
2
7
12
20
3
8 COAX
20
8 COAX
16
8 COAX
8 COAX
a
A
A
M
A
B
Z
Z
B
d
b
a
L
N
B
C
c
Y
Y
b
C
e
A
v
c
u
u
D
E
Z
P
X
X
D
w
t
t
d
AA
HH
Y
X
a
g
Q
C
R
D
F
E
B
C
W
GG
FF
x
e
s
y
W
v
E
K
f
b
c
NN
JJ
s
f
F
f
DD
BB
z
V
PP
LL
r
y
V
G
F
MM
KK
r
J
e
g
G
g
EE
CC
z
U
U
q
W
H
d
S
G
q
w
L
x
h
h
H
J
DD
AA
V
T
F
T
p
T
H
p
U
E
i
i
CC
BB
n
S
S
j
n
j
J
G
m
m
k
k
K
R
R
K
D
P
P
L
M
N
N
M
Insert Arrangement
Service Rating
22-96
24-31
24-51
I
24-61
II
7
I
I
Number of Contacts
Contact Size
31
16
47
20
4
61
20
12 for #10 WIRE
12 COAX
a
A
Z
B
Y
r
Contact Legend
F
t
b
C
s
c
X
z
D
Symbol
Contact Size
W
y
u
d
D
A
AA
BB
E
20
q
e
V
F
p
f
16
12
U
n
g
G
E
C
B
T
m
h
x
k
v
i
w
H
S
j
J
R
K
P
L
N
HV
M
Insert Arrangement
Service Rating
24-71
N/A
2
24-79
COAX
12 COAX
Number of Contacts
Contact Size
45
20
2
1
8C5OAX
8 COAX
16
8 COAX
20
Amphenol PT, SP, MS/PT
Proprietary/MIL-DTL-26482, Series 1
bayonet coupling and solder termination
Amphenol® solder contact miniature cylindrical connectors meet the
most critical application needs. Design versatility combined with high
reliability performance makes these series of Miniature Cylindrical
Connectors ideal for environmental sealing or pressurized applications.
wall mounting
receptacle
TheꢀMS/PTꢀSeriesꢀisꢀqualifiedꢀtoꢀMIL-DTL-26482,ꢀSeriesꢀ1ꢀandꢀhasꢀallꢀtheꢀoutstandingꢀ
designꢀcharacteristicsꢀandꢀqualityꢀofꢀtheꢀPTꢀSeries.ꢀTheꢀSPꢀSeriesꢀisꢀaꢀmodificationꢀ
ofꢀtheꢀPT,ꢀprovidingꢀspecialꢀshellsꢀwithꢀaꢀwideꢀmountingꢀflangeꢀforꢀbackꢀpanelꢀ
mounting.
Aꢀcorrosionꢀresistantꢀelectricallyꢀconductiveꢀfinishꢀofꢀcadmiumꢀplateꢀwithꢀanꢀoliveꢀ
drab chromate after-treatment is used on the PT and MS/PT. The SP is given a
durable non-conductive hard anodic “Alumilite”® coating which provides abrasion
protection and resistance to corrosion.
cable
connecting
receptacle*
**NEW** 500 hour corrosion resistance, RoHS compliant harsh environment
conductive plating. Gray Zinc over an Electroless Nickel (Gray ZnNi) base, with a Light
Gun Metal Gray appearance.
Shell components for these series are aluminum. The dependable 5 key/keyway
polarizationꢀwithꢀbayonetꢀlockꢀcouplingꢀassuresꢀpositiveꢀmatingꢀwithꢀnoꢀchanceꢀ
of cross plugging. Spring tension provided by a wave washer in the coupling nut
ensures maintenance of interfacial seal between mating halves.
box mounting
receptacle
Both the insert and main joint gasket are molded from resilient neoprene. This
provides excellent moisture sealing at the gasket and superior electrical isolation of
the contact in the insert.
Both pins and sockets are machined from a copper alloy and are gold plated.
Thisꢀgoldꢀplatingꢀeliminatesꢀcontactꢀcorrosionꢀandꢀoffersꢀanꢀindefiniteꢀshelfꢀlife.ꢀ
Socket contacts for these series are a closed entry design. A breakaway style plug is
available in the PT solder series. Hermetics receptacles are available in PT and MS/
PT solder series. Receptacles with printed circuit board contacts are also available.
straight plug
PTꢀSolderꢀisꢀULꢀrecognizedꢀunderꢀfileꢀ#E115497,ꢀVol.ꢀ1,ꢀSec.ꢀ5.ꢀTheꢀPT,ꢀSPꢀandꢀMS/PTꢀ
Series are intermateable and intermountable with all existing Miniature Cylindrical
Series connectors.
Refer to pages 4-10 for insert arrangement availability.
PT, SP, MS/PT
Table 1: CONTACT DATA/CONNECTOR RATINGS
Contact Specifications
Contact Test Cur-
Maximum Millivolt
Solder Well
Diameter
Solder Well
Depth
jam nut
receptacle
Size
rent
Drop†
+.004
.046
+.031
.125
20
7.5
55
50
-.000
-.000
+.005
.078
+.031
.188
16
12
13.0
23.0
-.003
-.000
+.004
-.002
+.031
-.000
42
.116
.188
† Silver plated wire
per MIL-DTL-26482
Service Rating
* This connector
style is sometimes
referred to as a
cable connecting
“plug.” It does,
however, mate
with a straight or
90 degree plug.
Recommended
Operating
AC Voltage at Sea
Level
Test Voltage AC (RMS), 60 cps
thru bulkhead
receptacle
Service
Rating
Sea
110,000
50,000 ft. 70,000 ft.
Level
ft.
I
600
1,500
2,300
500
750
375
500
200
200
II
1,000
11
Amphenol PT, SP, MS/PT
Proprietary/MIL-DTL-26482, Series 1
bayonet coupling and solder termination, cont.
PT, SP Service Classes
PT and SP connectors are available in the service classes listed below.
Eachꢀclass,ꢀwithꢀtheꢀexceptionꢀofꢀhermetic,ꢀoffersꢀoneꢀorꢀmoreꢀmeansꢀofꢀ
terminating or supporting a cable or wire bundle.
“A” general
duty
“A”ꢀꢀ
Generalꢀduty;ꢀbackꢀshellꢀisꢀthreadedꢀforꢀconduit
attachment of MS3057 cable clamp
“A” (SR) General duty, with strain relief clamp for cable
or wire bundle support
“C”ꢀꢀ
Pressurizedꢀreceptacle;ꢀlessꢀthanꢀ1ꢀcu.ꢀin.ꢀper
hour leakage at 30 psi over a temperature
range of –65°F to +257°F
Environmental resistant connectors - supplied
with a multi-holed grommet and clamping
nutꢀforꢀmoisture-proofingꢀindividualꢀopen
wires
“E”
“E” (SR),
MS/”F”
strain relief
ꢀ
“E” (SR) Environmental resistant strain relief clamp
ꢀ
ꢀ
andꢀgrommetꢀforꢀmoistureꢀproofingꢀindividual
wires;ꢀprovidesꢀaddedꢀwireꢀbundleꢀsupport
Translucent nylon boot for retaining customer-
appliedꢀpottingꢀcompounds;ꢀheldꢀin
“P”
ꢀ
place by a threaded ring
“E”,
“P” (SR) Strain relief clamp suitable for retaining customer
applied potting compounds, with provision
for wire support
MS/”E”
open wire seal
“PG”ꢀꢀ Compressingꢀcableꢀglandꢀforꢀmoistureꢀproofing
jacketed cables.
“H”*
Hermetically sealed with compression glass
inserts (see pages 22-25)
Style with printed circuit board contacts- see page 20.
“P”
MS/PT Service Classes
MS/ “P”
potting boot
TheꢀMS/PTꢀMiniatureꢀconnectorꢀisꢀavailableꢀinꢀtheꢀfollowingꢀcertifiedꢀ
service classes:
“E”
Environmental resistant connectors - supplied
with a multi-holed grommet and clamping
nutꢀforꢀmoisture-proofingꢀindividualꢀopenꢀwires
Grommet seal with strain relief clamp
Compressing clamp and neoprene gland for
moistureꢀproofingꢀmulti-conductorꢀjacketed
cable and strain relief. Telescoping sleeves
(MS 3420A) can be used to adapt to cables
smaller than minimum close-down.
ꢀ
“F”
“J”
ꢀ
“PG”
cable gland
seal
“P”
ꢀ
Translucent nylon boot for retaining customer-
appliedꢀpottingꢀcompounds;ꢀheldꢀin
place by a threaded ring
12
PT00 (MS3110)
SP00
wall mounting receptacle
S
L
PT
.120 .00ꢀ ꢁDi.
(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄz 24)
R
Q
M
(TP)
SP
.1ꢀ0 .00ꢀ ꢁDi.
“PG” Cable Gland Seal
4 Holzꢃ
R
S
A
(TP)
K
Z
TERMINATION ASSEMBLIES
“E” Open Wire Seal “P” Potting Boot
“A” General Duty/
“C”ꢀPressurized“
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
PT00PG-XX-XXX
L
L
L
L
V
G D H
N
N
N
D
N
D
“J” Cable Seal
XL
C
.375 MIN
PT00A-XX-XXX
SP00A-XX-XXX
PT00C-XX-XXX
PT00A-XX-XXX (SR)
SP00A-XX-XXX (SR)
PT00E-XX-XXX (SR)
SP00E-XX-XXX (SR)
PT00P-XX-XXX (SR)
SP00P-XX-XXX (SR)
MS3110F-XX-XXX
PT00E-XX-XXX
SP00E-XX-XXX
MS3110E-XX-XXX
PT00P-XX-XXX
SP00P-XX-XXX
MS3110P-XX-XXX
N
D
MS3110J-XX-XXX
To complete part number see how to order on page 25.
■ (MMC) located within .0025 of (TP)
Receptacle Front View
Receptacle Side View
Class “A”, “C”
Shell
Size
R
(TP)
S
Max.
K +.020
-.010
M +.010
-.000
Z
Max.
A
+.001
-.005
Q
V
L
Max.
N
Max.
L Max.
Thread
Class 2A
D Min.
Thread
Class A
PT
SP
PT
SP
PT
SP
PT
SP
PT SP
6
.469
.594
.719
.812
.906
.641
.734
.812
.938
.688
.812
.938
.953
1.047
1.125
.348
.473
.590
.750
.875
.493
.493
.493
.493
.493
.524
.524
.524
.524
.524
.906
.906
.906
.906
.906
.431 .462
.431 .462
.431 .462
.431 .462
.431 .462
.3125-32 NEF
.4375-28 UNEF
.5625-24 NEF
.6875-24 NEF
.8125-20 UNEF
.468 .438
.468 .438
.468 .438
.468 .438
.468 .438
.175
.297
.421
.546
.663
1.553
1.553
1.553
1.553
1.553
.462
.590
.717
.834
.970
.3750-32 NEF
.5000-28 UNEF
.6250-24 NEF
.7500-20 UNEF
.8750-20 UNEF
8
10
12
14
1.031 1.250
1.031 1.125 1.344
16
18
20
22
24
.969
1.125 1.219 1.438 1.000 .493
.524
.524
.906
.906
.431 .462
.431 .462
.9375-20 UNEF
1.0625-18 NEF
1.1875-18 NEF
1.3125-18 NEF
1.4375-18 NEF
.468 .438
.531 .438
.531 .531 1.014 1.703
.531 .531 1.134 1.703
.498 .498 1.259 1.765
.787
.879
1.553
1.553
1.088
1.216
1.332
1.460
1.585
1.0000-20 UNEF
1.1875-18 NEF
1.1875-18 NEF
1.4375-18 NEF
1.4375-18 NEF
1.062 1.203 1.312 1.516 1.125 .493
1.156 1.297 1.438 1.672 1.250 .650
1.250 1.375 1.562 1.750 1.375 .650
1.375 1.500 1.688 1.875 1.500 .650
.650 1.125 .556 .556
.650 1.125 .556 .556
.650 1.125 .589 .556
Class “e”,
MS/”E”
Class “A” (SR), “E” (SR), “P” (SR), MS/”F”
Class “P”, MS/”P”
Class “J”
D
Class “PG”
Shell
Size
C
D
G
H
L
N
L
N
D
L
N
N
XL
B
L
Thread
Min. Max. Max.
Max.
Max.
Max.
Max.
Min.
Max. Max.
Max.
Max.
Thread
Max.
Closed
Free
6
8
10
12
14
16
18
20
22
24
-
-
-
-
-
-
1.266
1.266
1.266
1.266
1.266
.440
.560
.685
.813
.930
.192 1.438 .484
.317 1.438 .608
.434 1.438 .734
.548 1.438 .858
.673 1.438 .984
-
-
-
-
-
-
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
.240
.302
.428
.552
.615
.740
.740
.928
.990
.125
.188
.312
.375
.500
.625
.625
.750
.800
.812
.875
1.000 1.922
1.125 1.922
1.922
1.922
.550
.675
.803
.920
.168
.205
.338
.416
.550
.600
.635
.670
.740
.230
.312
.442
.539
.616
.672
.747
.846
.894
.547
.675
.812
.940
1.067
1.194
1.322
1.449
1.576
2.271
2.271
2.411
2.599
2.943
3.172
3.610
3.766
3.985
M12x1.5-6H
M16x1.5-6H
M16x1.5-6H
M18x1.5-6H
M22x1.5-6H
M25x1.5-6H
M25x1.5-6H
M32x1.5-6H
M32x1.5-6H
.936
.936
.936
.936
.936
.936
1.180
1.180
1.180
1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110
1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234
1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360
1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484
1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610
All dimensions for reference only.
13
PT01 (MS3111)
cable connecting receptacle
L
“PG” Cable Gland Seal
S
M
Q
Y
S
A
K
Z
TERMINATION ASSEMBLIES
“A” General Duty
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
“E” Open Wire Seal
“P” Potting Boot
PT01PG-XX-XXX
L
L
L
L
V
“J” Cable Seal
N
D
G D H
N
N
D
N
XL
C
.375 MIN
PT01A-XX-XXX (SR)
PT01E-XX-XXX (SR)
PT01P-XX-XXX (SR)
MS3111F-XX-XXX
PT01E-XX-XXX
MS3111E-XX-XXX
PT01P-XX-XXX
MS3111P-XX-XXXX
PT01A-XX-XXX
N
D
Note: This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 25.
MS3116J-XX-XXX
Receptacle
Receptacle Side View
Front View
Class “A”, “C”
Shell
Size
K
+.020
-.010
M
+.016
-.000
A
+.001
-.005
Q
V
S
.020
Y
.020
Z
Max.
D
Min.
L
Max.
N
Max.
L Max.
Thread
Class 2A
Thread
Class A
6
.688
.812
.938
.812
.938
.348
.473
.590
.750
.875
.494
.494
.494
.494
.494
.494
.494
.650
.650
.683
.906
.906
.906
.906
.906
.906
.906
1.125
1.125
1.188
.400
.400
.400
.400
.400
.400
.400
.535
.535
.568
.3125-32 NEF
.4375-28 UNEF
.5625-24 NEF
.6875-24 NEF
.8125-20 UNEF
.9375-20 UNEF
1.0625-18 NEF
1.1875-18 NEF
1.3125-18 NEF
1.4375-18 NEF
.948
.948
.948
.948
.948
.948
.948
1.166
1.166
1.166
.175
.297
.421
.546
.663
.787
.879
1.553
1.553
1.553
1.553
1,553
1.553
1.553
.462
.590
.3750-32 NEF
.5000-28 UNEF
.6250-24 NEF
.6250-24 NEF
.8750-20 UNEF
1.0000-20 UNEF
1.1875-18 NEF
1.1875-18 NEF
1.4375-18 NEF
1.4375-18 NEF
8
10
12
14
16
18
20
22
24
1.062
.717
1.031 1.156
1.125 1.250
.834
.970
1.219 1.344 1.000
1.312 1.438 1.125
1.438 1.562 1.250
1.562 1.688 1.375
1.688 1.812 1.500
1.088
1.216
1.332
1.460
1.585
1.041 1.703
1.135 1.703
1.259 1.703
Class “e”,
MS/”E”
Class “A” (SR), “E” (SR), “P” (SR), MS/”F”
Class “P”, MS/”P”
Class “J”
Class “PG”
Shell
Size
D
C
D
G
H
L
N
L
N
D
L
N
N
XL
B
L
Thread
Min. Max. Max.
Max.
Max.
Max.
Max.
Min.
Max. Max.
Max.
Max.
Thread
Max.
Closed
-
Free
-
6
-
-
-
-
-
-
1.266
1.266
1.266
1.266
1.266
.440
.560
.685
.813
.930
.192 1.438 .484
.317 1.438 .608
.434 1.438 .734
.548 1.438 .548
.673 1.438 .673
-
-
-
-
8
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
.240
.302
.428
.552
.615
.740
.740
.928
.990
.125
.188
.312
.375
.500
.625
.625
.750
.800
.812
.875
1.922
1.922
.550
.675
.803
.920
.168
.205
.338
.416
.550
.600
.635
.670
.740
.230
.312
.442
.539
.616
.672
.747
.846
.894
.547
2.271
2.271
2.411
2.599
2.943
3.172
3.610
3.766
3.985
.936
.936
.936
.936
.936
.936
1.180
1.180
1.180
M12x1.5-6H
M16x1.5-6H
M16x1.5-6H
M18x1.5-6H
M22x1.5-6H
M25x1.5-6H
M25x1.5-6H
M32x1.5-6H
M32x1.5-6H
10
12
14
16
18
20
22
24
.675
1.000 1.922
1.125 1.922
.812
.940
1.188 2,047 1.047 1.266 1.057 .798 1.438 .798
1.438 2.078 1.165 1.266 1.175 .899 1.438 .899
1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.024
1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.149
1.719 2.406 1.543 1.516 1.555 1.274 1.717 1.274
1.067
1.194
1.322
1.449
1.576
All dimensions for reference only.
14
PT02 (MS3112)
SP02
box mounting receptacle
S
R
(TP)
L
PT
.120 .00ꢀ ꢁDi.
(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄz 24)
M
SP
.1ꢀ0 .00ꢀ ꢁDi.
4 Holzꢃ
R
(TP)
S
A
N
K
Z
PT02A-XX-XXX
SP02A-XX-XXX
* PT02C-XX-XXX
* SP02C-XX-XXX
* PT02E-XX-XXX
* SP02E-XX-XXX
MS3112E-XX-XXX
* PT02P-XX-XXX
* SP02P-XX-XXX
MS3112P-XX-XXX
To complete part number see how to order on page 25.
■ (MMC) located within .0025 of (TP)
*ꢀTheꢀPT02ꢀandꢀSP02ꢀboxꢀmountingꢀreceptaclesꢀareꢀmadeꢀonlyꢀtoꢀcompleteꢀaꢀseries;
no provision is made for accessories or potting on the rear skirt.
Receptacle Front View
Receptacle Side View
K
+.020
-.010
M
+.031
-.000
Shell
Size
R
(TP)
Z
Max.
A
+.001
-.005
N
Dia.
Max.
S
L Max.
PT
SP
PT
SP
PT
SP
PT
SP
PT
SP
6
.469
.641
.688
.953
.348
.473
.493
.493
.493
.493
.493
.493
.493
.650
.650
.683
.524
.524
.524
.524
.524
.524
.524
.650
.650
.683
.825
.825
.825
.825
.825
.825
.825
1.076
1.076
1.109
.431
.431
.431
.431
.431
.431
.431
.556
.556
.589
.462
.462
.462
.462
.462
.462
.462
.556
.556
.589
.323
.449
.465
.465
.465
.465
.465
.465
.465
.526
.526
.493
.438
.438
.438
.438
.438
.438
.438
.531
.531
.497
8
.594
.734
.812
1.047
1.125
1.250
1.344
1.438
1.516
1.672
1.750
1.875
10
12
14
16
18
20
22
24
.719
.812
.938
.590
.573
.812
.938
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.750
.699
.906
1.031
1.125
1.219
1.312
1.438
1.562
.875
.823
.969
1.000
1.125
1.250
1.375
1.500
.949
1.062
1.156
1.250
1.375
1.073
1.199
1.323
1.449
All dimensions for reference only.
15
PT06 (MS3116)
S
SP06
straight plug
“PG” Cable Gland Seal
TERMINATION ASSEMBLIES
“A” General Duty
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
“E” Open Wire Seal
“P” Potting Boot
L
L
L
L
V
PT06PG-XX-XXX
N
D
G D H
N
N
D
N
“J” Cable Seal
C
.375 MIN
PT06A-XX-XXX
PT06A-XX-XXX (SR)
SP06A-XX-XXX (SR)
PTG06A-XX-XXX (SR)
PT06E-XX-XXX (SR)
SP06E-XX-XXX (SR)
PTG06E-XX-XXX (SR)
PT06P-XX-XXX (SR)
SP06P-XX-XXX (SR)
PTG06P-XX-XXX (SR)
MS3116F-XX-XXX
PT06E-XX-XXX
SP06E-XX-XXX
PTG06E-XX-XXX
MS3116E-XX-XXX
PT06P-XX-XXX
SP06P-XX-XXX
PTG06P-XX-XXX
MS3116P-XX-XXX
XL
SP06A-XX-XXX
PTG06A-XX-XXX
N
D
MS3116J-XX-XXX
To complete part number see how to order on page 25.
Plug Front View
Plug Side View
Class “A”
Shell
Size
S
Max.
L
Max.
Q Thread
Class 2A
Z
Max.
D
L
Max.
N
Max.
V Thread
Class A
J
Min.
.175
.297
.421
.546
.663
.787
.879
1.014
1.135
1.259
6
8
.625
.750
.353
.353
.353
.353
.353
.353
.353
.415
.415
.415
.906
.906
.3125-32 NEF
.4375-28 UNEF
.5625-24 NEF
.6875-24 NEF
.8125-20 UNEF
.9375-20 UNEF
1.0625-18 NEF
1.1875-18 NEF
1.3125-18 NEF
1.4375-18 NEF
.594
.594
.594
.594
.594
.594
.594
.672
.672
.672
1.609
1.609
1.609
1.609
1.609
1.609
1.609
1.656
1.656
1.750
.462
.590
1.4375-18 NEF
.5000-28 UNEF
.6250-24 NEF
10
12
14
16
18
20
22
24*
.859
.906
.717
1.013
1.156
1.281
1.391
1.531
1.656
1.776
.906
.834
.7500-20 UNEF
.8750-20 UNEF
1.0000-20 UNEF
1.1875-18 NEF
1.1875-18 NEF
1.4375-18 NEF
1.4375-18 NEF
.906
.970
.906
1.088
1.216
1.332
1.460
1.587
.906
1.062
1.062
1.125
Class “e”,
MS/”E”
Class “A” (SR), “E” (SR), “P” (SR), MS/”F”
Class “P”, MS/”P”
Class “J”
Class “PG”
Shell
Size
D
C
D
G
H
L
N
L
N
D
L
N
N
XL
B
L
Thread
Min. Max. Max.
Max.
Max.
Max.
Max.
Min.
Max. Max.
Max.
Max.
Thread
Max.
Closed
Free
-
6
-
-
-
-
-
-
1.266
1.266
1.266
1.266
1.266
.440
.560
.685
.813
.930
.192 1.438 .484
.317 1.438 .608
.434 1.438 .734
.548 1.438 .858
.673 1.438 .984
-
-
-
-
-
8
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
.240
.302
.428
.552
.615
.740
.740
.928
.990
.125
.188
.312
.375
.500
.625
.625
.750
.800
.812
.875
1.922
1.922
.550
.675
.803
.920
.168
.205
.338
.416
.550
.600
.635
.670
.740
.230
.312
.442
.539
.616
.672
.747
.846
.894
.547
2.271
2.271
2.411
2.599
2.943
3.172
3.610
3.766
3.985
.936
.936
.936
.936
.936
.936
1.180
1.180
1.180
M12x1.5-6H
M16x1.5-6H
M16x1.5-6H
M18x1.5-6H
M22x1.5-6H
M25x1.5-6H
M25x1.5-6H
M32x1.5-6H
M32x1.5-6H
10
12
14
16
18
20
22
24
.675
1.000 1.922
1.125 1.922
.812
.940
1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110
1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234
1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360
1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484
1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610
16
1.067
1.194
1.322
1.449
1.576
All dimensions for reference only.
PT07 (MS3114)
SP07
jam nut receptacle
S
H
M
Z
“A” General Duty/
“C”ꢀPressurizedꢀReceptacle
PT07A-XX-XXX
S
A
J
PT07C-XX-XXX
R
P
TERMINATION ASSEMBLIES
K
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
“E” Open Wire Seal
“P” Potting Boot
M
Z
M
Z
M
Z
N
G D H
D N
A
A
A
J
J
J
C
L
R
R
R
P
L
P
P
L
PT07E-XX-XXX
SP07E-XX-XXX
MS3114E-XX-XXX
PT07A-XX-XXX (SR)
SP07A-XX-XXX (SR)
PT07E-XX-XXX (SR)
MS3114F-XX-XXX
PT07P-XX-XXX
MS3114P-XX-XXX
To complete part number see how to order on page 25.
Recept. Front View
Shell
Receptacle Side View
Panel Thickness
Class “E”, MS/”E”
A Dia.
+.001
-.005
J Flat
+.000
-.010
K
+.011
-.010
R Thread
Class 2A
UNEF
H
Z
Max.
L
Max.
N
Z
.0ꢀ0
Size
S
M
M
.016
Max.
Min.
Max.
6
.625
.750
.812
.938
.348
.473
.405
.530
.125
.125
.125
.125
.125
.125
.125
.156
.156
.156
.696
.696
.696
.696
.696
.696
.696
.884
.884
.917
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.125
.125
.125
.125
.125
.125
.125
.250
.250
.250
.4375-28
.5625-24
.6875-24
.8750-20
.231
.231
.231
.231
.231
.231
.231
.261
.261
.228
.568
.568
.568
.568
.568
.568
.568
.630
.630
.660
.696
.696
.696
.696
.696
.696
.696
.884
.884
.917
.604
.729
.191
.191
.191
.191
.191
.191
.191
.221
.221
.188
8
10
12
14
16
18
20
22
24
.875
1.062
1.250
1.375
1.500
1.625
1.812
1.938
2.062
.590
.655
.854
1.062
1.188
1.312
1.438
1.562
1.688
1.816
.750
.818
.979
.875
.942
1.0000-20
1.1250-18
1.2500-18
1.3750-18
1.5000-18
1.6250-18
1.104
1.229
1.354
1.510
1.635
1.760
1.000
1.125
1.250
1.375
1.500
1.066
1.191
1.316
1.441
1.566
Class “A” (SR), “E” (SR), “P” (SR), MS/”F”
Class “E” (SR)
Class “P”, MS/”P”
Shell
Size
C
C
D
D
L +.010
D Max.
G
H
L
M
G
H
L
M
M
N
Z
Thread
Thread
Max.
Max.
.202
.327
.444
.558
.683
.808
.909
1.034
1.159
1.284
-.026
.593
.593
.593
.593
.593
.593
.593
.718
.718
.718
6
-
-
-
-
-
-
-
-
-
-
-
-
.696
.696
.696
.696
.696
.696
.696
.884
.884
.917
.484
.608
.734
.858
.984
.191
8
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
.250
.312
.438
.562
.625
.750
.750
.938
1.000
.125
.188
.312
.375
.500
.625
.625
.750
.800
.781
.844
.969
1.062
1.062
1.062
.696
.696
.696
.696
.696
.696
.884
.884
.917
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
.250
.312
.438
.562
.625
.750
.750
.938
.125
.188
.312
.775 1.029 .696
.837 1.029 .696
.963 1.029 .696
.191
.191
.191
.191
10
12
14
16
18
20
22
24
1.094 1.062
1.156 1.188
1.406 1.188
1.406 1.250
1.594 1.250
1.594 1.250
.375 1.087 1.029 .696
.500 1.150 1.161 .696
.625 1.400 1.161 .696
.625 1.400 1.224 .884
.750 1.587 1.224 .884
1.110 .191
1.234 .191
1.360 .221
1.484 .221
1.610 .188
1.000 .800 1.681 1.320 .917
17
*Sizeꢀ24ꢀstrainꢀreliefꢀavailableꢀinꢀPTꢀonlyꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀꢀꢀꢀꢀꢀꢀAllꢀdimensionsꢀforꢀreferenceꢀonly.
PT08 E
G
SP08 E
90 degree plug
“E” Open Wire Seal, “E” (SR)
TERMINATION ASSEMBLIES
“P” Potting Boot 75 degrees
Strain Relief
L
L
E
A
K
B
H
PT08E-XX-XXX
PT08P-XX-XXX
SP08P-XX-XXX
SP08E-XX-XXX
D
PT08E-XX-XXX (SR)
SP08E-XX-XXX (SR)
C
To complete part number see how to order on page 25.
All lockwire holes are .044 Dia. Min.
Plug
Front
View
Plug Side View
Shell
Size
Class “E”, “E” (SR)
Class “P”
G
Dia.
Max
C
+.010
-.025
E
+.0ꢀ7
-.025
B
.031
D
.062
L
.057
A
.025
H
.015
K
.015
L
Max.
8
.796
.921
.655
.749
.169
.170
.264
.310
.330
.444
.510
.515
.656
.941
.339
.393
.450
.519
.583
.621
.683
.739
.797
1.786
1.880
1.965
2.113
2.315
2.423
2.695
2.742
2.980
.469
.547
.625
.734
.750
.781
.859
.906
1.169
.312
.438
.516
.625
.656
.703
.766
.812
.918
.438
.562
1.656
1.781
1.843
1.953
2.000
2.046
2.218
2.265
2.624
10
12
14
16
18
20
22
24
1.191
1.191
1.254
1.316
1.562
1.625
1.719
1.751
1.046
1.171
1.297
1.422
1.562
1.672
1.797
.812
.688
.905
.781
1.030
1.015
1.077
1.139
1.265
.890
1.000
1.125
1.234
1.374
All dimensions for reference only.
18
PT Connectors with
Printed Circuit Board Contacts
Box Mounting Receptacle (PT02)
S
R
(TP)
L
PT
with PCB Contacts
.120 .00ꢀ ꢁDi.
(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄz 24)
M
Orderꢀbyꢀapplicableꢀpartꢀnumberꢀinꢀchartꢀbelow;
SP
add insert arrangement number. Refer to insert availability
on pages 4-10.
.1ꢀ0 .00ꢀ ꢁDi.
4 Holzꢃ
R
(TP)
■ (MMC) located within .0025 of (TP)
S
A
N
K
Z
Receptacle Front View
Receptacle Side View
Part Number*
PT02 with PCB
Contacts
Shell
Size
S
A
+.001
-.005
K
+.021
-.010
M
N
Dia.
Max.
Z
+.0ꢀ0
-.050
R
L
+.011
(TP)
-.010
+.031
Max.
-.000
6
71-570120-XXX
71-570121-XXX
71-570122-XXX
71-570123-XXX
71-570124-XXX
71-570125-XXX
71-570126-XXX
71-570127-XXX
71-570128-XXX
71-570129-XXX
.469
.594
.688
.812
.348
.473
.493
.493
.493
.493
.493
.493
.493
.650
.650
.683
.825
.825
.825
.825
.825
.825
.825
1.076
1.076
1.109
.431
.431
.431
.431
.431
.431
.431
.556
.556
.589
.323
.380
.380
.380
.380
.380
.380
.380
.286
.286
.253
8
.449
10
12
14
16
18
20
22
24
.719
.938
.590
.573
.812
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.750
.699
.906
.875
.823
.969
1.000
1.125
1.250
1.375
1.500
.949
1.062
1.156
1.250
1.375
1.073
1.199
1.323
1.449
All dimensions for reference only.
S
H
M
Jam Nut Receptacle (PT07)
with PCB Contacts
Z
All lockwire holes are .044 Dia. Min.
Orderꢀbyꢀapplicableꢀpartꢀnumberꢀinꢀchartꢀbelow;
add insert arrangement number. Refer to insert availability
on pages 4-10.
S
A
J
R
P
K
Receptacle Front View
Receptacle Side View
P Panel
Part Number*
Shell
Size
H
+.017
-.016
A Dia.
+.001
-.005
J Flat
+.000
-.010
K
+.011
-.010
R
Z
+.025
-.035
PT02 with PCB
Contacts
S
.010
M
Thickness
Min. Max.
.062 .125
Thread
Class 2A
.010
6
71-533720-XXX
71-533721-XXX
71-533722-XXX
71-533723-XXX
71-533724-XXX
71-533725-XXX
71-533726-XXX
71-533727-XXX
71-533728-XXX
71-533729-XXX
.625
.750
.812
.938
.348
.473
.405
.530
.125
.125
.125
.125
.125
.125
.125
.156
.156
.156
.696
.696
.696
.696
.696
.696
.696
.884
.884
.917
.4375-28 UNEF
.5625-24 UNEF
.6875-24 UNEF
.8750-20 UNEF
.376
.376
.376
.376
.376
.376
.376
.367
.367
.334
8
.062
.062
.062
.062
.062
.062
.062
.062
.062
.125
.125
.125
.125
.125
.125
.250
.250
.250
10
12
14
16
18
20
22
24
.875
1.062
1.250
1.375
1.500
1.625
1.812
1.938
2.062
.590
.655
1.062
1.188
1.312
1.438
1.562
1.688
1.816
.750
.818
.875
.942
1.0000-20 UNEF
1.1250-18 UNEF
1.2500-18 UNEF
1.3750-18 UNEF
1.5000-18 UNEF
1.6250-18 UNEF
1.000
1.125
1.250
1.375
1.500
1.066
1.191
1.316
1.441
1.556
All dimensions for reference only.
* For RoHS compliance connectors with PCB contacts change “71”- to:
“FL”ꢀdesignatesꢀconductiveꢀgrayꢀzincꢀnickelꢀplating
“93”ꢀdesignatesꢀblackꢀzincꢀcobaltꢀplating
19
PTB
SPB
thru bulkhead receptacle
L
S
M
PTB
.120 .00ꢀ ꢁDi.
(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄz 24)
R
P
(TP)
SPB
.1ꢀ0 .00ꢀ ꢁDi.
4 Holzꢃ
R
S
A
A
(TP)
K
* PTB-XX-XXX
* SPB-XX-XXX
* To complete part number add desired arrangement number (refer to pages 4 and 5 for insert
availability)ꢀandꢀaddꢀ“PS”;
Example: PTB-18-32PS. If a rotation is required, use PTB-18-32PS and add W, X, Y or Z. Example:
PTB-18-32 PSW.
The socket end of the insert always appears at the “P” dimension end of shell.
■(MMC) located within .0025 of (TP)
Receptacle Front View
Receptacle Side View
Shell
Size
R
(TP)
P
Max.
S
A
+.001
-.005
K
+.016
-.000
M
+.010
-.000
L
.005
PTB
SPB
PTB
SPB
PTB
SPB
6
.469
.594
.641
.734
.688
.812
.953
.348
.473
.625
.625
.625
.625
.625
.625
.625
.781
.781
.781
1.050
1.050
1.050
1.050
1.050
1.050
1.050
1.330
1.330
1.330
.562
.562
.562
.562
.562
.562
.562
.688
.688
.688
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.188
.188
.188
.188
.188
.188
.188
.312
.312
.312
8
1.047
1.125
1.250
1.344
1.438
1.516
1.672
1.750
1.875
10
12
14
16
18
20
22
24
.719
.812
.938
.590
.812
.938
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.750
.906
1.031
1.125
1.203
1.297
1.375
1.500
.875
.969
1.000
1.125
1.250
1.375
1.500
1.062
1.156
1.250
1.375
All dimensions for reference only.
20
PT
hermetic
Three shell styles are available in the hermetic PT
bayonet series:
• PTIH (MS3113H)
• PT02H
solder
mounting
receptacle
• PT07H (MS3114H)
These hermetic connectors are only available with solder cup or
flatꢀeyeletꢀpinꢀcontactsꢀinꢀtheꢀMS/PTꢀversion.ꢀSocketꢀcontacts
are available in some proprietary PT versions. Other design
characteristics of the PT hermetic connector series are as
follows:
Shellꢀsizes:ꢀ8ꢀthroughꢀ24ꢀ(tinꢀplated)
Contact count: 2 through 61. Refer to pages 4 and 5 for insert
availability for hermetics.
Current:ꢀꢀ5.0ꢀampꢀeachꢀ#20ꢀcontact
ꢀ
ꢀ
10ꢀampꢀeachꢀ#16ꢀcontact
17ꢀampꢀeachꢀ#12ꢀcontact
ContactsꢀareꢀtinꢀplatedꢀforꢀPT;ꢀgoldꢀisꢀoptional
DielectricꢀWithstandingꢀVoltageꢀ(seaꢀlevel):
1500 volts (RMS) 60 cps, Service Rating I
2300 volts (RMS) 60 cps, Service Rating II
box mounting
receptacle
Compression glass inserts, permanently lettered
Helium Leakage: Less than 1.0 X 10-6 cc/sec.
ꢀ
ꢀ
atꢀ15ꢀpsiꢀdifferential
Physical Shock: 100 G’s
Vibration:ꢀꢀ
ExceedsꢀMIL-E-5272ꢀProcedureꢀII
Thermal Shock:
No deterioration or failure after 5 cycles
at –55°F to +257°F
Intermateability: Mates with MS3116 and PT06
Refer to pages 4-10 for insert arrangement availability.
jam nut
receptacle
21
PTIH (MS3113H)
hermetic solder mounting receptacle
L
W
G
A
N
.031 +.006
–.005
Z
* PTIH-XX-XXX
** PTIY-XX-XXX
** MS3113H-XXCXXX
† PTIH-XX-XXX (100)
†† PTIY-XX-XXX (100)
†† MS3113H-XXYXXX
To complete part number see how to order on page 25.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
† Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
Recept.
Front View
Receptacle Side View
N Dia.
Shell Size
A Dia.
+.001
-.005
L
W
G Dia.
Max.
Z
+.025
-.016
+.001
-.005
+.001
-.010
Max.
6
.511
.636
.348
.473
.447
.447
.447
.447
.447
.447
.447
.509
.509
.542
.438
.562
.094
.094
.094
.094
.094
.094
.094
.094
.125
.125
.386
.386
.386
.386
.386
.386
.386
.386
.418
.418
8
10
12
14
16
18
20
22
24
.761
.590
.672
.855
.750
.781
.980
.875
.906
1.105
1.229
1.323
1.449
1.574
1.000
1.125
1.250
1.375
1.500
1.031
1.156
1.250
1.375
1.500
All dimensions for reference only.
22
PT02H
hermetic box mounting receptacle
PT
S
.120 .00ꢀ ꢁDi.
R
L
W
(.147 .00ꢀ ꢁDi.ꢂ ꢃDꢄz 24)
(TP)
SP
.1ꢀ0 .00ꢀ ꢁDi.
4 Holzꢃ
R
S
A
N
Z
(TP)
U
* PT02H-XX-XXX
** PT02Y-XX-XXX
† PT02H-XX-XXX (100)
†† PT02Y-XX-XXX (100)
To complete part number see how to order on page 25.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
† Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
■ (MMC) located within .0025 of (TP)
Recept. Front View
A Dia.
Receptacle Side View
L
N Dia.
+.001
-.005
U
+.011
-.010
Shell Size
R
S
K
.015
Z
Max.
+.001
-.005
+.025
-.015
(TP)
.016
6
.469
.594
.688
.812
.348
.473
.047
.047
.047
.047
.047
.047
.047
.047
.079
.079
.494
.494
.494
.494
.494
.494
.494
.556
.556
.588
.438
.562
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.344
.344
.344
.344
.344
.344
.344
.344
.377
.377
8
10
12
14
16
18
20
22
24
.719
.938
.590
.672
.812
1.031
1.125
1.219
1.312
1.438
1.562
1.688
.750
.781
.906
.875
.906
.969
1.000
1.125
1.250
1.375
1.500
1.031
1.156
1.250
1.375
1.500
1.062
1.156
1.250
1.375
All dimensions for reference only.
23
PT07H (MS3114H)
hermetic jam nut receptacle
S
H
M
Z
S
A
R
P
K
* PT07H-XX-XXX
** PT07Y-XX-XXX
** MS3114H-XXCXXX
† PT07H-XX-XXX (100)
†† PT07Y-XX-XXX (100)
†† MS3114H-XXYXXX
To complete part number see how to order on page 25.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
† Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
Recept. Front View
Receptacle Side View
P Panel Thickness
Shell
Size
H Hex
+.017
-.016
A
+.001
-.005
K
+.0ꢀ3
-.016
M
+.031
-.000
R
S
.016
Thread
Class 2A
Z Max.
Max.
Min.
6
.812
.938
.625
.750
.348
.473
.094
.094
.094
.094
.094
.094
.094
.125
.125
.125
.696
.696
.696
.696
.696
.696
.696
.884
.884
.917
.125
.125
.125
.125
.125
.125
.125
.250
.250
.250
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.4375-28 UNEF
.5625-24 NEF
.6875-24 NEF
.8750-20 UNEF
1.0000-20 UNEF
1.1250-18 NEF
1.2500-18 NEF
1.3750-18 NEF
1.5000-18 NEF
1.6250-18 NEF
.206
.206
.206
.206
.206
.206
.206
.081
.081
.048
8
10
12
14
16
18
20
22
24
1.062
1.250
1.375
1.500
1.625
1.812
1.938
2.062
.875
.590
1.062
1.188
1.312
1.438
1.562
1.688
1.812
.750
.875
1.000
1.125
1.250
1.375
1.500
All dimensions for reference only.
24
PT, SP, MS/PT
how to order
PT,SP
Ex: PT00A-20-41PW003
7.
Insert Rotation
W
8.
1.
Connector Type
PT
2.
Shell Style
00
3.
4.
Shell Size
20
5.
6.
Insert
Arrangement
Service Class
Contact Configuration
Finish
003
A
41
P
1. Connector Type
3. Service Class
7. Insert Rotation
standard olive drab, electrically conductive cadmium
plate bayonet lock connector with solder contacts
No letter is required for normal position
A
C
General duty back shell
Pressurized receptacle
PT
W
electrically non-conductive, hard anodic coated bay-
SP onet lock connector with solder contacts and larger
X
Environmental resisting open wire seal with grom-
met and nut
Refer to page 6
E
P
flange and mounting holes for back panel mounting
Y
Z
PTG plug with grounding fingers
Assembly with potting boot
Adapter for cable glad for moisture proofing
jacketed cables
PG
2. Shell Style
8. Finish
H
Y
Hermetic* without interfacial seal
Hermetic* with interfacial seal
00 Wall mounting receptacle
01 Cable connecting receptacle
02 Box mounting receptacle
06 Straight plug
SR Designates a strain relief clamp
Indicate optional finishes as follows:
Suffix added for flat eyelet pin contacts in hermetic
versions
ꢀ. Shell Size
100
Shell sizes 6 - 24 available
OR
07 Jam nut receptacle
08 90 degree plug cable support
005 * Anodic coating - Alumilite® (standard on “SP”)
023 * Electroless nickel
5. Insert Arrangement
Refer to pages 4-10 for insert availability
(Use only the number following the hyphen)
B
I
thru bulkhead receptacle (pressurized)
Solder mount receptacle (Hermetic only)
025
Black zinc cobalt plating
072 * Conductive gray zinc nickel plating
6. Contact Configuration
ꢀ2ꢀ * Electroless nickel finish with strain relief
P
S
Pin contacts
ꢀ70
725
Black zinc cobalt plating with strain relief
Gray zinc nickel plating with strain relief
Socket contacts
For ordering connectors with printed circuit board
contacts, see pg. 19.
*ꢀꢀRoHSꢀCompliantꢀfinish
Note: Olive drab cadmium is the default plating. If required on SP
typeꢀuseꢀsuffixꢀ(003).ꢀ
MS/PT
MIL-DTL-26ꢀ82, Series 1
Ex: MS3110E20-41PW
7.
8.
Insert Rotation
W
1.
2.
3.
Shell Style
0
4.
5.
Shell Size
20
6.
Insert Arrangment
41
Specification
Number
Contact
Configuration
Connector Type
Service Class
MS
311
E
P
1. Connector Type
ꢀ. Service Class
7. Contact Configuration
MS Military standard
E
F
Environmental resisting connector
P
S
Pin contacts
Environmental resisting connectors
with strain relief
Socket contacts
2. Specification Number
For ordering connectors with printed circuit board
contacts, see pg. 19.
Clamp assembly for moisture proofing
multi-jacketed cables, with strain relief
Basic family number for
MIL-DTL-26482, Series 1 solder type
J
311
P
Potted type with potting boot
Hermetic
8. Insert Rotation
H
3. Shell Style
No letter is required for normal position
0
1
Wall mounting receptacle
W
5. Shell Size
Cable connecting receptacle
X
Refer to page 6
Shell sizes 8 - 24 available
Y
2
3
ꢀ
Box mounting receptacle
Solder mount receptacle (Hermetic only)
Jam nut receptacle
Z
6. Insert Arrangement
Refer to pages 4-10 for insert availability
(Use only the number following the hyphen)
6
Straight plug
* Hermetic connectors are supplied with tin plated shells.
** This connector style is sometimes referred to as a cable
connecting “plug”. It does, however, mate with either a
straight or 90 degree plug.
Hermetic Version:
In this version a letter replaces the hyphen between the
Shell Size and Insert Arrangement (Steps 5 and 6)
Y
Flat eyelet pin contacts
C
Solder cup pin contacts
Amphenol PT-SE, SP-SE, MS/PT-SE
Proprietary/MIL-DTL-26482, Series 1
bayonet coupling and crimp termination
Amphenol® SE crimp type miniature connectors provide
performance and versatility needed for applications
demanding high reliability and crimp removable contacts.
These crimp contacts are rear insertable/front release and
are held in position by an MS approved spring tower
retention system.
wall mounting
receptacle
TheꢀMS/PT-SEꢀSeriesꢀisꢀqualifiedꢀtoꢀMIL-DTL-26482,ꢀSeriesꢀ1ꢀandꢀhasꢀallꢀtheꢀ
outstanding design characteristics and quality of the PT Series.
TheꢀSP-SEꢀSeriesꢀisꢀaꢀmodificationꢀofꢀtheꢀPT-SE,ꢀprovidingꢀspecialꢀshellsꢀwithꢀaꢀ
wideꢀmountingꢀflangeꢀforꢀbackꢀpanelꢀmounting.
cable
connecting
receptacle*
Aꢀcorrosionꢀresistantꢀelectricallyꢀconductiveꢀfinishꢀofꢀcadmiumꢀplateꢀwithꢀanꢀ
olive drab chromate after-treatment is used on the PT-SE and MS/PT-SE. The
SP-SE is given a durable non-conductive hard anodic “Alumilite”® coating
which provides abrasion protection and resistance to corrosion.
500 hour corrosion resistance, RoHS compliant harsh environment conductive
plating. Gray Zinc over an Electroless Nickel (Gray ZnNi) base, with a Light Gun
Metal Gray appearance.
box mounting
receptacle
Shell components for these series are aluminum. The dependable 5 key/
keywayꢀpolarizationꢀwithꢀbayonetꢀlockꢀcouplingꢀassuresꢀpositiveꢀmatingꢀwithꢀ
no chance of cross plugging. Spring tension provided by a wave washer in the
coupling nut
ensures maintenance of interfacial seal between mating halves.
Both the insert and main joint gasket are molded from resilient neoprene.
This provides excellent moisture sealing at the gasket and superior electrical
isolation of the contact in the insert.
straight plug
Both pins and sockets are machined from a copper alloy and are gold plated.
Thisꢀgoldꢀplatingꢀeliminatesꢀcontactꢀcorrosionꢀandꢀoffersꢀanꢀindefiniteꢀshelfꢀ
life. Socket contacts for these series are closed entry design.
Breakaway style plug is available in PT-SE crimp.
jam nut
receptacle
The PT-SE, SP-SE and MS/PT-SE Series are intermateable and intermountable
with all existing Miniature Cylindrical Series connectors.
Refer to pages 4-10 for insert arrangement availability.
* This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
26
PT-SE, SP-SE, MS/PT-SE
Contact Specifications
Maximum
Millivolt Drop†
Crimp Well
Diameter
Minimum Well
Depth
Contact Size
Test Current
“SE”,
20
16
12
7.5
55
49
42
.049 .001
.067 .001
.100 .002
.267
.236
.236
MS / “E”
open wire seal
13.0
23.0
Service Rating
Recommended
Operating AC
Voltage at Sea
Level
Test Voltage AC (RMS), 60 cps
Service
Rating
70,000 ft.
110,000 ft.
Sea Level
50,000 ft.
I
600
1,500
2,300
500
750
375
500
200
200
II
1,000
† Silver plated wire per MIL-DTL-26482
PT-SE and SP-SE Service Classes
PT-SE and SP-SE connectors are available in the three
service classes listed below.
“SE” (SR),
MS / “F”
strain relief
clamp
“SE”
Open wire sealing - environmental resistant,
ꢀꢀꢀꢀwithꢀaꢀnutꢀandꢀgrommetꢀforꢀmoistureꢀproofing
individual wires
ꢀ
“SE (SR)“ Strain relief clamp - environmental resistant
strain relief clamp and grommet for moisture
ꢀ
ꢀꢀꢀꢀproofingꢀindividualꢀwires;ꢀprovidesꢀadded
wire bundle support
Translucent nylon boot for retaining customer
ꢀꢀꢀꢀappliedꢀpottingꢀcompounds;ꢀheldꢀinꢀplaceꢀby
a threaded ring
“SP”
ꢀ
MS/PT-SE Service Classes
MS-SE series connectors are available in the following
certifiedꢀserviceꢀclasses:
“E”
Open wire sealing - environmental resisting
connectors are supplied with a multi-hole
grommet and clamping nut for moisture
proofingꢀindividualꢀopenꢀwires
Environmental resistant strain relief clamp
andꢀgrommetꢀforꢀmoistureꢀproofingꢀindividual
wires;ꢀprovidesꢀaddedꢀwireꢀbundleꢀsupport
Potting applications - these connectors are
supplied with a translucent nylon boot for retention
of customer applied potting compound
“SP”,
MS / “P”
potting boot
ꢀ
“F”
ꢀ
ꢀ
“P”
27
PT00 SE (MS3120)
SP00 SE
wall mounting receptacle
S
T Dia.
4 Holes
R
(TP)
R
S
(TP)
TERMINATION ASSEMBLIES
“SE” (SR), MS / “F” Strain Relief
“SE” Open Wire Seal
“SP” Potting Boot
L
A
N
M
K
PT00SE-XX-XXX
SP00SE-XX-XXX
MS3120E-XX-XXX
PT00SE-XX-XXX (SR)
SP00SE-XX-XXX (SR)
MS3120F-XX-XXX
PT00SP-XX-XXX
SP00SP-XX-XXX
To complete part number see how to order on page 36.
■(MMC) located within .005 of (TP)
Receptacle Front View
Receptacle Side View
M
+.010
-.000
Shell
Size
R
(TP)
S
Max.
T Dia.
.005
P*
A Dia.
+.001
-.005
K
.016
Panel Thickness
PT
.594
SP
-
PT
SP
PT
SP
-
PT
SP
-
PT
SP
-
8
.828
-
.120
.120
.120
.120
.120
.120
.120
.120
.147
.473
.590
.062
.062
.062
.062
.062
.062
.094
.094
.094
.431
.431
.431
.431
.431
.431
.556
.556
.589
.094
.094
.094
.094
.094
.094
.219
.219
.219
10
12
14
16
18
20
22
24
.719
.812
.938
1.031
1.125
1.203
1.297
1.375
1.500
.954
1.141
1.226
1.360
1.453
1.532
1.688
1.766
1.891
.150
.150
.150
.150
.150
.150
.150
.150
.462
.462
.462
.462
.462
.556
.556
.589
.125
.125
.125
.125
.125
.219
.219
.219
.812
1.047
1.141
1.234
1.328
1.453
1.578
1.703
.750
.906
.875
.969
1.000
1.125
1.250
1.375
1.500
1.062
1.156
1.250
1.375
Class “SE”, MS/”E”
L
Class “SE”(SR), MS/”F”
Class “SP”, MS/”P”
Shell
Size
N Dia.
Max
G
L
Max.
N
Max.
D Dia.
Max.
L
Max.
N Dia.
Max.
Max.
Dia.
.125
.188
.312
.375
.500
.625
.625
.750
.800
8
1.328
1.328
1.328
1.328
1.328
1.328
1.359
1.359
1.422
.560
2.422
2.422
2.422
2.422
2.537
2.537
2.824
2.824
2.900
.781
-
-
-
10
12
14
16
18
20
22
24
.704
.844
.444
.558
.683
.808
.909
1.034
1.159
1.284
1.656
1.656
1.656
1.656
1.656
1.750
1.750
1.782
.734
.825
.969
.858
.954
1.094
1.156
1.406
1.406
1.594
1.688
.984
1.080
1.204
1.330
1.454
1.580
1.110
1.234
1.360
1.484
1.610
* Back panel mounting
All dimensions for reference only.
28
MF00 SE (MS3128)
wall mounting receptacle
Tꢀ Dia.
4 Holes
S
Rꢀ
(TP)
R
(TP)
R
Rꢀ
S
(TP) (TP)
T Dia.
4 Holes
MS / “F” Strain Relief
“SE” Open Wire Seal
TERMINATION ASSEMBLIES
L
N
A
M
K
MF00SE-XX-XXX (SR)
MS3128F-XX-XXX
MF00SE-XX-XXX
MS3128E-XX-XXX
Receptacle Front View
Receptacle Side View
Class MS/ ”E”
Shell
Size
Class MS/ “F”
A Dia.
+.001
-.000
M
+.010
-.000
S
T Dia.
.005
T1 Dia.
.005
K
.016
R
R1
L
N
F
G
L
N
Max.
Max.
Max.
Min.
Dia.
Max.
Max.
10
.719
.812
1.141
1.266
1.360
1.453
1.532
1.688
1.766
1.891
.120
.120
.120
.120
.120
.120
.120
.147
.150
.150
.150
.150
.150
.150
.150
.150
.590
.062
.462
.462
.462
.462
.462
.556
.556
.589
1.328
1.328
1.328
1.328
1.28
.685
.297
.188
1.906
1.906
1.906
2.000
2.000
2.172
2.172
2.234
.891
12
14
16
18
20
22
24
.812
.938
.750
.062
.062
.062
.062
.094
.094
.094
.813
.422
.547
.609
.734
.734
.922
.984
.312
.375
.500
.625
.625
.750
.800
1.016
1.141
1.203
1.469
1.469
1.656
1.750
.906
1.031
1.125
1.203
1.297
1.375
1.500
.875
.930
.969
1.000
1.125
1.250
1.375
1.500
1.057
1.175
1.301
1.428
1.533
1.062
1.156
1.250
1.375
1.359
1.359
1.422
All dimensions for reference only.
29
PT01 SE (MS3121)
SP01 SE
cable connecting receptacle
S
S
TERMINATION ASSEMBLIES
“SE” Open Wire Seal
“SE” (SR), MS / “F” Strain Relief
“SP”, MS / “P” Potting Boot
L
L
D
N
N
A
A
K
K
K
PT01SE-XX-XXX
SP01SE-XX-XXX
MS3121E-XX-XXX
PT01SE-XX-XXX (SR)
SP01SE-XX-XXX (SR)
MS3121F-XX-XXX
PT01SP-XX-XXX
SP01SP-XX-XXX
MS3121P-XX-XXX
Note: This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 36.
Receptacle
Front View
Receptacle Side View
Class “SE” (SR), MS/”F”
Shell
Size
Class “SE”, MS/ ”E”
Class “SP”, MS/”P”
S
Max.
A Dia.
+.001
-.005
K
.018
L
Max.
N Dia.
Max.
N
Max.
L
N Dia.
Max.
G Dia.
L Max.
D Dia.
Max.
8
.832
.975
.473
.590
.094
.094
.094
.094
.094
.094
.115
.115
.115
1.522
1.522
1.522
1.522
1.522
1.522
1.709
1.709
1.709
.560
.685
.125
.188
.312
.375
.500
.625
.625
.750
.800
2.422
2.422
2.422
2.422
2.537
2.537
2.824
2.824
2.900
.828
.891
-
-
-
10
12
14
16
18
20
22
24
.444
.558
.683
.808
.909
1.034
1.159
1.284
1.656
1.656
1.656
1.656
1.656
1.750
1.750
1.782
.734
1.068
1.162
1.256
1.349
1.475
1.599
1.729
.750
.813
1.016
1.141
1.203
1.469
1.469
1.656
1.750
.858
.875
.930
.984
1.000
1.125
1.250
1.375
1.500
1.057
1.175
1.301
1.428
1.555
1.110
1.234
1.360
1.484
1.610
All dimensions for reference only.
30
PT02 SE (MS3122)
SP02 SE
box mounting receptacle
S
L
R
M
(TP)
K
R
S
A
N
(TP)
T Dia.
4 Holes
D
PT02SE-XX-XXX
SP02SE-XX-XXX
MS3122E-XX-XXX
To complete part number see how to order on page 36.
■ (MMC) located within .0025 of (TP)
Receptacle Front View
Receptacle Side View
T
Dia.
.005
M
+.010
-.000
A
N
Dia.
+.011
-.000
Shell
Size
S
Max.
D
Max.
R
Dia.
+.001
-.005
K
.025
L
Max.
PT
.594
SP
PT
.828
SP
PT
.120
SP
PT
.312
SP
PT
.431
SP
8
-
-
-
.473
-
.062
1.358
1.296
1.296
1.296
1.296
1.296
1.358
1.358
1.358
-
.438
10
12
14
16
18
20
22
24
.719
.812
.954
1.141
1.266
1.360
1.453
1.532
1.688
1.766
1.891
.120
.120
.120
.120
.120
.120
.120
.147
.150
.590
.312
.312
.312
.312
.312
.406
.406
.406
.219
.062
.062
.062
.062
.062
.094
.094
.094
.431
.431
.431
.431
.431
.556
.556
.589
.462
.562
.812
.938
1.047
1.141
1.234
1.328
1.453
1.578
1.703
.150
.150
.150
.150
.150
.150
.150
.750
.219
.219
.219
.219
.344
.344
.344
.462
.462
.462
.462
.556
.556
.589
.688
.906
1.031
1.125
1.203
1.297
1.375
1.500
.875
.812
.969
1.000
1.125
1.250
1.375
1.500
.938
1.062
1.156
1.250
1.375
1.062
1.188
1.312
1.438
All dimensions for reference only.
31
MF02 SE (MS3127)
box mounting receptacle
Tꢀ Dia.
4 Holes
S
L
Rꢀ
(TP)
M
R
K
(TP)
R
Rꢀ
S
A
N
(TP) (TP)
T Dia.
D
4 Holes
MF02SE-XX-XXX
MS3127E-XX-XXX
To complete part number see how to order on page 36.
■ (MMC) located within .0025 of (TP)
Receptacle Front View
Receptacle Side View
K
N
Dia.
+.011
-.000
Shell
Size
A
M
+.010
-.000
S
T
.005
T1
.005
D
L
R
R1
Dia.
Max.
+.001
-.005
Max.
.016
Max.
10
12
14
16
18
20
22
24
.562
.688
.719
.812
.812
.938
1.141
1.266
1.360
1.453
1.532
1.688
1.766
1.891
.120
.120
.120
.120
.120
.120
.120
.147
.150
.150
.150
.150
.150
.150
.150
.150
.590
.750
.219
.219
.219
.219
.219
.344
.344
.344
.062
.062
.062
.062
.062
.094
.094
.094
1.266
1.266
1.266
1.266
1.266
1.328
1.328
1.328
.462
.462
.462
.462
.462
.556
.556
.589
.812
.906
1.031
1.125
1.203
1.297
1.375
1.500
.875
.938
.969
1.000
1.125
1.250
1.375
1.500
1.062
1.188
1.312
1.438
1.062
1.156
1.250
1.375
All dimensions for reference only.
32
PT06 SE (MS3126)
SP06 SE
straight plug
S
TERMINATION ASSEMBLIES
“SE”, MS / “E” Open Wire Seal
“SE” (SR), MS / “F” Strain Relief
“SP”, MS / “P” Potting Boot
L
L
L
N
G N
D N
Z pin contacts
Zꢀ socket contacts
Z pin contacts
Zꢀ socket contacts
Z pin contacts
Zꢀ socket contacts
PT06SE-XX-XXX
SP06SE-XX-XXX
PTG06SE-XX-XXX
MS3126E-XX-XXX
PT06SE-XX-XXX (SR)
SP06SE-XX-XXX (SR)
PTG06SE-XX-XXX (SR)
MS3126F-XX-XXX
PT06SP-XX-XXX
SP06SP-XX-XXX
PTG06SP-XX-XXX
MS3126P-XX-XXX
To complete part number see how to order on page 36.
Plug Front View
Plug Side View
Class “SE”, MS/”E”
Class “SE” (SR), MS/”F”
Class “SP”, MS/”P”
Shell Size
S Dia.
Max.
Z
.0ꢀ5
Z1
G
L
N
D
Dia.
L
Max.
N Dia.
Max.
.0ꢀ5
L Max.
N Max.
Dia.
.125
.188
.312
.375
.500
.625
.625
.750
.800
Max.
Max.
8*
10
12
14
16
18
20
22
24
.734
.859
.640
.640
.640
.640
.640
.640
.640
.640
.640
.579
.579
.579
.579
.579
.579
.579
.579
.579
1.328
1.328
1.328
1.328
1.328
1.328
1.297
1.297
1.359
.540
.685
2.413
2.413
2.413
2.413
2.528
2.528
2.753
2.753
2.830
.828
.327
.444
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.766
.578
.734
.891
1.031
1.156
1.281
1.391
1.531
1.656
1.777
.813
1.016
1.141
1.203
1.469
1.469
1.656
1.750
.558
.858
.930
.683
.984
1.057
1.175
1.301
1.428
1.533
.808
1.110
1.234
1.360
1.484
1.610
.909
1.034
1.159
1.284
* PT-SE, MS-SE and MS-SP only.
All dimensions for reference only.
33
PT07 SE (MS3124)
S
SP07 SE
H
jam nut receptacle
S
TERMINATION ASSEMBLIES
“SE”, MS / “E” Open Wire Seal
“SE” (SR), MS / “F” Strain Relief
“SP”, MS / “P” Potting Boot
L
L
L
M
M
M
K
R
K
K
J
N
J
F N
J
A
G N
A
A
R
P
R
P
P
PT07SE-XX-XXX
SP07SE-XX-XXX
MS3124E-XX-XXX
PT07SE-XX-XXX (SR)
SP07SE-XX-XXX (SR)
MS3124F-XX-XXX
PT07SP-XX-XXX
SP07SP-XX-XXX
MS3124P-XX-XXX
To complete part number see how to order on page 36.
All lockwire holes are .044 Dia. Min.
Receptacle Front View
A Dia.
Receptacle Side View
P
J Flat
+.000
-.010
K
+.011
-.010
R
Shell Size
H Hex
Max.
S
M
.005
Panel Thickness
Min. Max.
.062 .125
+.001
-.005
Thread
Class 2A
Max.
8
.767
.954
.473
.530
.125
.696
.696
.696
.696
.696
.696
.884
.884
.917
.5625-24 UNEF
.6875-24 NEF
.8750-20 UNEF
1.0000-20 UNEF
1.1250-18 NEF
1.2500-18 NEF
1.3750-18 NEF
1.5000-18 NEF
1.6250-18 NEF
10
12
14
16
18
20
22
24
.892
1.078
1.266
1.391
1.516
1.641
1.828
1.954
2.078
.590
.655
.125
.125
.125
.125
.125
.156
.156
.156
.062
.062
.062
.062
.062
.062
.062
.062
.125
.125
.125
.125
.125
.250
.250
.250
1.079
1.205
1.329
1.455
1.579
1.705
1.829
.750
.818
.875
.942
1.000
1.125
1.250
1.375
1.500
1.066
1.191
1.316
1.441
1.556
Class “SE”, MS/”E”
Class “SE” (SR), MS/”F”
Class “SP”, MS/”P”
Shell Size
L
Max.
N
Max.
F
G Dia.
Free
L
Max.
N
Max.
G
Dia.
L
Max.
N Dia.
Max.
Min.
.234
.297
.422
.547
.609
.734
.734
.922
.984
8
1.438
1.438
1.438
1.438
1.438
1.438
1.625
1.625
1.688
.749
.874
.125
.188
.312
.375
.500
.625
.625
.750
.800
1.922
1.922
1.922
1.922
2.000
2.000
2.172
2.172
2..234
.828
-
-
-
10
12
14
16
18
20
22
24
.891
.444
.558
.683
.808
.909
1.656
1.656
1.656
1.656
1.656
1.922
1.922
1.951
.734
.999
1.016
1.141
1.203
1.469
1.469
1.656
1.750
.858
1.124
1.249
1.374
1.530
1.655
1.780
.984
1.110
1.234
1.360
1.484
1.610
1.034
1.159
1.284
All dimensions for reference only.
34
PT08 SE
SP08 SE
90 degree plug
G
TERMINATION ASSEMBLIES
“SP” Potting Boot 75 degrees
“SE” Open Wire Seal, “SE” (SR) Strain Relief
L
L
E
A
B
H
PT08SE-XX-XXX
PT08SP-XX-XXX
SP08SP-XX-XXX
SP08SE-XX-XXX
PT08SE-XX-XXX (SR)
SP08SE-XX-XXX (SR)
D
K
C
To complete part number see how to order on page 36.
All lockwire holes are .044 Dia. Min.
Plug Front View
Plug Side View
C
+.010
-.025
E
+.0ꢀ7
-.025
Shell Size
G Dia.
Max.
B
.031
D
.062
L
Max.
A
.025
H
.015
K
.015
L
Max.
10
12
14
16
18
20
22
24
.921
.749
.812
.170
.264
.310
.330
.444
.510
.515
.656
1.191
1.191
1.254
1.316
1.562
1.625
1.719
1.750
.393
.450
.519
.583
.621
.683
.739
.787
2.137
2.222
2.370
2.572
2.680
2.753
2.799
3.037
.547
.625
.734
.750
.781
.859
.906
1.181
.438
.516
.625
.656
.703
.766
.812
.918
.562
.688
2.031
2.093
2.203
2.250
2.296
2.343
2.390
2.624
1.046
1.171
1.297
1.422
1.562
1.672
1.797
.905
.781
1.030
1.015
1.077
1.139
1.250
.890
1.000
1.125
1.234
1.374
All dimensions for reference only.
35
PT-SE, SP-SE, MS/PT-SE
how to order
PT-SE, SP-SE
Ex: PT00SE-20-41PW003
7.
Insert Rotation
W
8.
1.
Connector Type
PT
2.
Shell Style
00
3.
Service Class
SE
4.
Shell Size
20
5.
6.
Insert
Arrangement
Contact Configuration
Finish
003
41
P
1. Connector Type
3. Service Class
7. Insert Rotation
standard olive drab, electrically conductive cadmium
plate bayonet lock connector with solder contacts
No letter is required for normal position
SE Environmental crimp
SP potted type crimp
PT
W
standard olive drab, electrically conductive cadmium
plated, bayonet lock connector with dual mounting
holes, and
X
Both of the above are Amphenol proprietary versions of the
MILDTL-26482, Series 1 crimp contact connector and offer
15 lbs. contact retention for size 20 contacts; 25 lbs. for size
16 contacts.
Refer to page 6
MF
Y
crimp contacts
Z
electrically non-conductive, hard anodic coated bay-
SP onet lock connector with solder contacts and larger
adapter for cable gland for moisture proofing
jacketed cables
PG
flange and mounting holes for back panel mounting
SQ Braided shield termination
8. Finish
2. Shell Style
G
Heatshrink termination
SR Designates a strain relief clamp
Indicate optional finishes as follows:
00 Wall mounting receptacle
01 Cable connecting receptacle
02 Box mounting receptacle
06 Straight plug
Suffix added for flat eyelet pin contacts in hermetic
versions
ꢀ. Shell Size
100
Shell sizes 8 - 24 available
OR
005 * Anodic coating - Alumilite® (standard on “SP”)
023 * Electroless nickel
5. Insert Arrangement
07 Jam nut receptacle
08 90 degree plug
Refer to pages 4-10 for insert availability
(Use only the number following the hyphen)
025
Black zinc cobalt plating
072 * Conductive gray zinc nickel plating
6. Contact Configuration
ꢀ2ꢀ * Electroless nickel finish with strain relief
P
S
Pin contacts
ꢀ70
725
Black zinc cobalt plating with strain relief
Gray zinc nickel plating with strain relief
Socket contacts
*ꢀꢀRoHSꢀCompliantꢀfinish
MS/PT-SE
MIL-DTL-26ꢀ82, Series 1
Note: Olive drab cadmium is the default plating. If required on SP
typeꢀuseꢀsuffixꢀ(003).ꢀ
Ex: MS3120E20-41PW
7.
8.
Insert Rotation
W
1.
Connector Type
MS
2.
3.
Shell Style
0
4.
5.
Shell Size
20
6.
Insert Arrangement
41
Specification
Number
Contact
Configuration
Service Class
311
E
P
1. Connector Type
ꢀ. Service Class
7. Contact Configuration
MS Military standard
E
F
P
Environmental resisting connector
P
S
Pin contacts
Environmental resisting connectors with strain relief
Potted type with potting boot
Socket contacts
2. Specification Number
312 basic family for MIL-DTL-26482, Series 1 crimp type
8. Insert Rotation
SQ Braided shield termination
Heatshrink termination
No letter is required for normal position
G
3. Shell Style
W
0
1
2
ꢀ
6
7
8
Wall mounting receptacle
X
Refer to page 6
5. Shell Size
Cable connecting receptacle*
Box mounting receptacle
Y
Shell sizes 8 - 24 available
Z
Jam nut receptacle
* This connector style is sometimes referred to as a cable
connecting “plug”. It does, however, mate with either a
straight or 90 degree plug.
6. Insert Arrangement
Straight plug
Refer to pages 4-10 for insert availability
(Use only the number following the hyphen)
box mounting receptacle with dual mounting holes
wall mounting receptacle with dual mounting holes
36
PT & SP
accessoriesꢀ–ꢀsealingꢀplugs,ꢀflangeꢀgaskets,
potting boots
SEALING PLUGS- FOR PT & SP
A
Dia.
.010
B
Dia.
.005
Contact
Size
MS
Number
C
.010
Color
Code
Amphenol®
Part Number
C
B
DIA
12
16
20
10-405996-12
10-405996-16
10-405996-16
MS27488-12
MS27488-16
MS27488-20
.121
.083
.060
.171
.133
.090
.564
.564
.564
Yellow
Blue
.135 +.030
–.025
A
DIA
Red
How to Order: Order by 10- (Proprietary) or MS part number as shown in chart
above.
SEALING PLUG
MS27488-XX
10-405996-XX
MOUNTING FLANGE GASKETS – FOR PT & SP
PT & SP
10-1019ꢀ9
10-1509ꢀ9
PT
10-1019ꢀ9
SP
10-1509ꢀ9
.130 DIA SIZE 6 TO 22
.156 DIA SIZE 24
.160 DIA 10-150949
Shell Size
F
R
.010
S
.010
R
.010
S
.010
T
.008
+.016
-.000
6
.469
.594
.688
.812
.641
.734
.953
.375
.500
.024
.024
.024
.024
.024
.024
.024
.024
.024
.024
8
1.047
1.125
1.250
1.344
1.438
1.516
1.672
1.750
1.875
T
10
12
14
16
18
20
22
24
.719
.938
.812
.625
.813
1.031
1.125
1.219
1.312
1.438
1.563
1.688
.938
.750
.906
1.031
1.125
1.203
1.297
1.375
1.500
.875
.969
1.000
1.125
1.250
1.375
1.500
MOUNTING FLANGE GASKET
10-101949-XX
10-150949-XX
1.063
1.156
1.250
1.375
HowꢀtoꢀOrder:ꢀForꢀPT:ꢀ10-101949-XXꢀ(completeꢀorderꢀnumberꢀwithꢀdesiredꢀshellꢀsize).
ForꢀSP:ꢀ10-150949-XXꢀ(completeꢀorderꢀnumberꢀwithꢀdesiredꢀshellꢀsize).
ꢀ
75° POTTING BOOTS – FOR PT & SP
Shell
Size
B
Max.
D
.015
E
.015
L
Max.
B
E
15º
REF
8
.433
.493
.552
.643
.658
.689
.750
.794
1.070
.312
.438
.516
.625
.656
.703
.766
.812
.918
.438
.562
.766
.830
10
12
14
16
18
20
22
24
D
.688
.861
.781
.916
L
.890
.936
1.000
1.125
1.234
1.374
.959
1.052
1.073
1.310
75° POTTING BOOT
10-101988-XX
HowꢀtoꢀOrder:ꢀ10-101988-XXꢀ(completeꢀorderꢀnumberꢀwithꢀdesiredꢀshellꢀsize).
All dimensions for reference only
37
CLASS “E” STRAIN RELIEF CLAMP – FOR PT & SP
PT & SP
Shell
Size
B
C Thread
Class 2B
D
G
L
Max.
Max.
Min.
Max.
accessories – clamps
8
.550
.675
6-32 NC
6-32 NC
6-32 NC
6-32 NC
6-32 NC
8-32 NC
8-32 NC
8-32 NC
8-32 NC
.240
.302
.428
.552
.615
.740
.740
.928
.928
.812
.875
.930
.930
10
12
14
16
18
20
22
24
.803
1.000
1.125
1.188
1.438
1.438
1.719
1.719
.930
.920
.930
1.047
1.165
1.291
1.418
1.533
1.062
1.062
1.093
1.093
1.093
L
B
D G
How to Order:
10-101971-XX X
C
Addꢀdesiredꢀꢀ
shellꢀsizeꢀꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀAddꢀdesiredꢀfinishꢀsuffix†
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ“3”ꢀdesignatesꢀoliveꢀdrabꢀcadmium
“5’ designates Alumilite®
CLASS “E” STRAIN RELIEF CLAMP
10-101971-XX
Not for use with jam nut style connectors
CLASSES “A” & “P” STRAIN RELIEF CLAMP – FOR PT & SP
L
Shell
Size
B
Max.
C Thread
Class 2B
D
Min.
G
Max.
+.010
-.020
8
.540
.665
6-32 NC
6-32 NC
.240
.302
.428
.552
.614
.740
.740
.928
.938
.812
.875
.843
.843
10
12
.793
6-32 NC
1.000
1.125
1.188
1.438
1.438
1.719
1.719
.843
14
.910
6-32 NC
.843
L
16
1.037
1.155
1.281
1.408
1.533
6-32 NC
.975
18
8-32 NC
.975
20
8-32 NC
1.007
1.007
1.007
B
D G
22
24
8-32 NC
8-32 NC
How to Order:
10-101980-XX X
C
Addꢀdesiredꢀꢀ
shellꢀsizeꢀꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀAddꢀdesiredꢀfinishꢀsuffix†
CLASSES “A” & “P” STRAIN
RELIEF CLAMP
10-101980-XX
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ“3”ꢀdesignatesꢀoliveꢀdrabꢀcadmium
“5’ designates Alumilite®
Not for use with jam nut style connectors
CLASS “A” CABLE CLAMPS – FOR PT & SP
Shell
Size
A
.031
B
Max.
C
V
Amphenol®
Part Number
Dia. Min.
Thread
10
12
97-3057-1004
97-3057-1007
97-3057-1008
97-3057-1010
97-3057-1012
97-3057-1016
.795
.850
.920
.920
.927
1.015
.842
.995
.3125
.4375
.5625
.6250
.7500
.9375
.6250-24
.7500-20
.8750-20
1.0000-20
1.1875-18
1.4375-18
14
1.120
1.216
1.403
1.683
16
V Thread
18/20
22/24
HowꢀtoꢀOrder:ꢀOrderꢀbyꢀ97-3057-XXXXꢀnumberꢀlistedꢀabove.ꢀStandardꢀfinishꢀisꢀꢀ oliveꢀ
drabꢀzincꢀalloy.ꢀConsultꢀAmphenol,ꢀSidney,ꢀNYꢀforꢀalternateꢀfinishes.
B
†ꢀStandardꢀaccessoryꢀfinishesꢀareꢀ“3”ꢀoliveꢀdrabꢀcadmiumꢀforꢀPTꢀandꢀMS/PTꢀtypes,
“5” Alumilite® for SP types. Electroless nickel plating is also available on some
items;ꢀconsultꢀAmphenol,ꢀSidney,ꢀNY
C
A
All dimensions for reference only.
CLASS “A” CABLE CLAMP
97-3057-XXXX
38
PT, SP, MS/PT
accessories – protection caps
RECEPTACLE PROTECTION CAPS – FOR PT, SP, MS/PT
PLUG PROTECTION CAPS – FOR PT, SP, MS/PT
C
B
.140 +.010
–.005
L
L
DIA
FOR SIZE 24
.125 +.010
–.005
DIA
+.010
N
G
.140
FOR SIZE 6-22
X
X
RECEPTACLE PROTECTION CAP
FOR PT, SP, MS/PT CONNECTORS
PLUG PROTECTION CAP
FOR PT, SP, MS/PT CONNECTORS
10-101964-XXX
MS3181-XXX
(Jam Nut Recptacle)
MS3180-XXX
10-101957-XXX
10-101960-XXX
MS3181-XXX
(Wall Receptacle)
10-101961-XXX
(Cable Connecting
Receptacle)
B Dia. C Dia.
G
Dia.
Max.
L
X
X
N Dia.
+.001
-.005
L Dia.
+.025
-.015
X
X
Shell
Size
Shell
Size
Std. & MS
CA, RA
MS only
CAL/ RAL
+.010
-.000
+.010
-.000
+.020
Std. & MS
MS only
-.000 RA, CA, NA RAL/CAL/NAL
6
.348
.473
.532
.532
.532
.532
.532
.532
.532
.594
.594
.627
3.000
3.000
3.000
3.500
3.500
3.500
3.500
4.000
4.000
4.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
6
.328
.454
.454
.578
.577
.706
.563
.563
.563
.563
.563
.563
.563
.563
.563
.603
3.000
3.000
3.000
3.500
3.500
3.500
3.500
4.000
4.000
4.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
8
8
10
12
14
16
18
20
22
24
.590
10
12
14
16
18
20
22
24
.578
.703
.816
.750
.703
.891
1.000
1.128
1.257
1.367
1.496
1.624
1.747
.875
.844
1.016
1.141
1.266
1.391
1.516
1.614
1.000
1.125
1.250
1.375
1.500
.969
1.094
1.219
1.343
1.453
How to Order Proprietary Receptacle Caps:
Wall Receptacle Caps:
How to Order Proprietary Plug Caps:
10-101957-XX X
10-101960- XX X
ꢀ
ꢀ
ꢀ
Addꢀdesiredꢀshellꢀsize
Cable Connecting Receptacle Caps:
Jam Nut Receptacle Caps:
10-101961- XX X
10-101964- XX X
ꢀ
ꢀ
Addꢀdesiredꢀfinishꢀsuffix†
“FL”ꢀdesignatesꢀgrayꢀzincꢀnickel
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Addꢀdesiredꢀshellꢀsize
“3” designates olive drab cadmium
“5” designates Alumilite®
ꢀ
ꢀ
Addꢀdesiredꢀfinishꢀsuffix†
“FL”ꢀdesignatesꢀgrayꢀzincꢀnickel
“3” designates olive drab cadmium
“5” designates Alumilite®
Proprietary caps are supplied with standard bead chains only (as
shown in drawing at left). For other chain options an MS version
cap should be ordered.
Proprietary caps are supplied with standard bead chains only (as shown
in drawing at left). For other chain options, an MS version cap should be
ordered.
How to Order
MSꢀVersionꢀPlugꢀCaps:ꢀꢀ
MS3180-ꢀXXꢀꢀꢀꢀꢀ-CAꢀforꢀsashꢀchain
HowꢀtoꢀOrderꢀMSꢀVersionꢀReceptacleꢀCaps:
-CAL for long sash chain
-RA for rope chain
Wall Receptacle Caps:
MS3181- XX
-CA for sash chain
-CAL for long sash chain
-RA for rope chain
ShellꢀSizeꢀꢀ
ꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ-RALꢀforꢀlongꢀropeꢀchain
-RAL for long rope chain
-NA for sash chain
Jam Nut Recept. Caps:
MS3181- XX
-NAL for long sash chain
ꢀ
ꢀ
Shellꢀsize
MSꢀversionsꢀareꢀsuppliedꢀwithꢀstandardꢀanodizeꢀfinishꢀonly.ꢀForꢀotherꢀ
finishꢀoptionsꢀaꢀproprietaryꢀcapꢀshouldꢀbeꢀordered.
39
PT & SP
accessories – dummy receptacles, “O” rings,
plastic dust caps
DUMMY RECEPTACLES – FOR PT, SP, MS/PT
Proprietary
Version
S
R
MS Version
M
N
.150 DIA. +.004
Shell
Size
K
.010
M
–.002
+.030 +.001
-.000 -.005
4 HOLES
K
R
S
R1
S1
(TP)
.005
.010
(TP)
8
.062
.062
.062
.062
.062
.062
.062
.062
.062
.462
.462
.462
.462
.473
.590
.750
.875
.734
.812
1.047
1.125
1.250
1.344
1.438
1.516
1.672
1.750
1.875
.594
.719
.828
.954
R
S
N
10
12
14
16
18
20
22
24
.938
.812
1.047
1.141
1.234
1.328
1.453
1.578
1.703
1.031
.906
.462 1.000 1.125
.462 1.125 1.203
.556 1.250 1.297
.556 1.375 1.375
.589 1.500 1.500
.969
DUMMY RECEPTACLE
FOR PT, SP, MS/PT CONNECTORS
1.062
1.156
1.250
1.375
MS3115-XXX
10-150921-XXX
How to Order Proprietary Dummy Receptacles:
10-150921-XX X
ꢀ
ꢀ
ꢀ
Addꢀdesiredꢀshellꢀsize
ꢀ
ꢀ
Addꢀdesiredꢀfinishꢀsuffix†
ꢀ
“FL”ꢀdesignatesꢀgrayꢀzincꢀnickel
“3” designates olive drab cadmium
“5” designates Alumilite®
HowꢀtoꢀOrderꢀMSꢀVersionꢀDummyꢀReceptacles:ꢀꢀꢀ
ꢀ
ꢀ
ꢀ
MS3115-XXꢀX
Addꢀdesiredꢀshellꢀsize
Addꢀdesiredꢀfinishꢀsuffix†
ꢀ
-A designates Alumilite®
-L designates electroless nickel
-W designates olive drab cadmium
PLASTIC DUST CAPS – FOR PT, SP
How to Order Plastic Dust Caps:
Plug Plastic Dust
Receptacle Plastic
Dust Cap
Shell Size
Cap
Toꢀtheꢀbasicꢀorderꢀnumberꢀaddꢀtheꢀdustꢀcapꢀsizeꢀto
matchꢀconnectorꢀplugꢀorꢀreceptacleꢀshellꢀsize,ꢀas
shown in the tables above.
Example: 10-70506-12 would be the correct order
number for a plastic dust cap for a PT00 receptacle,
shellꢀsizeꢀ10.
6
10-70500-8
10-70506-12
10-70500-12
10-70506-16
10-70506-18
10-70506-20
10-70506-22
10-70506-24
10-70524-1
10-70506-28
10-70506-8S
10-70506-10
10-70506-12
10-70506-14
10-70506-16
10-70506-18
10-70506-20
10-79506-22
10-70506-24
10-70524-1
8
10
12
14
16
18
20
22
24
All dimensions for reference only.
40
PT accessories
glands
Nylon Cable Glands
Metal Cable Glands
Material: ꢀ
ꢀ
ꢀ
ꢀ
Nylonꢀ66ꢀ(ULꢀApprovedꢀ94V-2)
ULꢀ94V-2ꢀ(ULꢀApprovedꢀ94V-2)
Metric;ꢀPG,ꢀNPT
Material: ꢀ
Clamping:ꢀ
Seal Ring:ꢀ
BrassꢀwithꢀNickel;ꢀBrassꢀwithꢀTin/Nickel
Seal ring:ꢀ
ULꢀapprovedꢀPA6,ꢀ94V-0
Thread Type:ꢀ
Temp Range:
ULꢀ94V-2ꢀ(ULꢀapprovedꢀNBR,ꢀ94V-2;ULꢀꢀapproved
Static:
-40° to +100°C
ꢀ
ꢀ
ꢀ
DOWꢀCORNINGꢀRUBBER,ꢀ94V-0
Metric, PG, NPT
IP68 (tighten with o-ring)
-40° to +100°C
Dynamic:
Short Term:
-20° to +80°C
+120°
Thread Type:
Protective:
Temp Range:
Current Colors:
Gray, Black
TorqueꢀValueꢀ(N-M)ꢀofꢀhexꢀandꢀcapꢀnuts:ꢀ3.0-4.5ꢀN-MꢀM12,ꢀM16,ꢀM20ꢀ
areꢀULꢀrecognizedꢀunderꢀfileꢀ#E339605
Cable
Range
(mm)
Thread
“L”
(mm)
Clamp
“H”
(mm)
Spanner
“S”
(mm)
Cable
Range
(mm)
Thread
“L”
(mm)
Clamp
“H”
(mm)
Spanner
“S”
(mm)
M “d”
(mm)
Thread
“A”
M “d”
(mm)
AIGO Part
Thread “A”
AIGO Part
AIO-CSJM12
AIO-CSJM14
AIO-CSJM16
AIO-CSJM18
AIO-CSJM20
AIO-CSJM22
AIO-CSJM24
AIO-CSJM25
AIO-CSJM27
AIO-CSJM30
AIO-CSJM32
M12x1.5
M14x1.5
M16x1.5
M18x1.5
M20x1.5
M22x1.5
M24x1.5
M25x1.5
M27x1.5
M30x2.0
M32x1.5
6.5
8
3-6.5
4-8
6.2
5
15
19
20
20
20
24
24
23
26
26
27
14
15
18
22
22
24
27
30
30
32
40
AIO-CSM12
AIO-CSM16
AIO-CSM18
AIO-CSM18
AIO-CSM20
AIO-CSM22
AIO-CSM24
AIO-CSM25
AIO-CSM30
AIO-CSM32
AIO-CSM33
AIO-CSM40
AIO-CSM50
AIO-CSM72
AIO-CSIN1/2
AIO-CSIN3/4
AIO-CSIN3/2
AIO-CSGIN3/4
AIO-CSGIN1
AIO-CSGIN5/4
AIO-CSGIN3/2
AIO-CSGIN5/2
AIO-CSPG7
AIO-CSPG9
AIO-CSPG11
AIO-CSPG13.5
AIO-CSPG16
AIO-CSPG21
AIO-CSPG29
AIO-CSPG36
AIO-CSPG42
M12 x1.5
8
3-6.5
4-8
8
8
20
22
25
30
30
30
30
33
38
39
48
50
75
28
32
50
26
27
33
48
48
75
20
22
24
26
28
33
38
48
52
15
19
22
24
27
27
33
33
42
42
54
60
80
24
33
54
24
33
42
54
54
80
15
19
22
24
27
33
42
54
60
M16 x 1.5
M18 x 1.5
M20 x 1.5
M22 x 1.5
M24 x 1.5
M25 x 1.5
M30 x 2.0
M32 x 1.5
M33 x 2.0
M40 x 1.5
M50 x 1.5
M72 x 2.0
NPT1/2”
NPT 3/4”
NPT 1”1/2”
G 1/2”
8
9
6-9
6.3
7
10
12
14
14
18
18
25
25
32
38
57
12
18
32
12
18
25
28
32
57
6.5
8
5-10
9
10
12
14
14
18
18
18
25
5-10
6-12
9
6-12
8.3
8
10-14
10-14
13-18
13-18
18-25
18-25
22-32
32-38
51-57
6-12
10
10
10
11
11
11
13
14
16
13.6
14.1
17.3
9
10-14
10-14
13-18
13-18
13-18
18-25
8
7.8
8
8
10
AIO-CSJM36
AIO-CSJM40
AIO-CSJM50
AIO-CSJM63
AIO-CSJM72
AIO-CSJM80
AIO-CSJM90
AIO-CSJIN1/2
AIO-CSJIN3/4
AIO-CSJIN5/4
M36x2.0
M40x1.5
M50x1.5
M63x1.5
M72x1.5
M80x2.0
M90x2.0
NPT 1/2”
NPT 3/4”
NPT 1”1/4”
25
32
38
44
52
60
70
12
18
32
18-25
22-32
32-38
37-44
46-52
52-60
62-70
6-12
10
10
34
39
39
43
47
57
57
25
26
41
40
50
60
67
75
90
100
24
30
50
11
12
16
20
13-18
22-32
6-12
20
13.6
14.1
17.3
13-18
22-32
G 3/4”
13-18
18-25
21-28
22-32
51-57
3-6.5
4-8
11
11
13
13
14
8
AIO-CSJIN3/2
AIO-CSJIN2
NPT 1”1/2”
NPT2”
32
44
52
70
12
18
25
32
32
22-32
37-44
46-52
62-70
6-12
17.3
17.7
23.7
26
46
46
58
58
24
27
34
39
39
50
65
80
100
24
30
40
50
50
G1”
G1”1/4
AIO-CSJIN5/2
AIO-CSJIN3
NPT2 1/2”
NPT3”
G1”1/2”
G2”1/2”
PG7
AIO-CSJGIN1/2
AIO-CSJGIN3/4
AIO-CSJGIN1
AIO-CSJGIN5/4
AIO-CSJGIN3/2
G1/2”
8
G3/4”
13-18
18-25
22-32
22-32
8
G1”
10
G1”1/4”
G1”1/2”
10
PG9
8
10
PG11
10
12
14
18
25
32
38
5-10
8
AIO-CSJGIN2
G2”
44
37-44
12
44
65
PG13.5
PG16
6-12
9
AIO-CSJGIN 5/2
AIO-CSJPG7
G2 1/2”
PG7
52
6.5
8
46-52
3-6.5
4-8
16
6
47
18
21
20
24
25
26
38
42
44
82
14
18
22
22
24
30
50
60
65
10-14
13-18
18-25
22-32
32-38
10
11
11
13
14
PG21
AIO-CSJPG9
PG9
7
AIO-CSJPG11
AIO-CSJPG13.5
AIO-CSJPG16
AIO-CSJPG21
AIO-CSJPG36
AIO-CSJPG42
AIO-CSJPG48
PG11
PG13.5
PG16
PG21
PG36
PG42
PG48
10
12
14
18
32
38
44
5-10
7
PG29
6-12
8
PG36
10-14
13-18
22-32
32-38
37-44
8
PG42
8
10
11
12
For additional information on other products available refer to our
Cord grips & Cable Glands, Catalog 12-055
41
Application Tools
“SE”
Theꢀfollowingꢀdataꢀincludesꢀinformationꢀpertainingꢀtoꢀtheꢀapplicationꢀtoolsꢀforꢀcrimping,ꢀinsertingꢀandꢀremovingꢀsizeꢀ
20, 16, and 12 contacts incorporated in Amphenol® Miniature Cylindrical Connectors.
Allꢀcrimpingꢀtoolsꢀincludedꢀareꢀtheꢀ“fullꢀcycling”ꢀtype,ꢀandꢀwhenꢀusedꢀasꢀspecifiedꢀbyꢀtheꢀmanufacturer,ꢀprovideꢀ
reliable crimped wire to contact termination.
Toolꢀframesꢀandꢀturretꢀheadsꢀareꢀavailableꢀfromꢀapprovedꢀtoolꢀmanufacturers;ꢀconsultꢀAmphenol,ꢀSidney,ꢀNYꢀforꢀlistings.
Assembly instructions are available online at www.amphenol-industrial.com
See the following:
L-786 for SE assembly instructions
L-555 for solder type instructions
CRIMPING TOOLS
FOR PT-SE, SP-SE, MS/PT-SE
(MIL-DTL-26482, Series 1) Connectors
MS Tool Part Number
Contact Size
Tool From
M22520/1-01
M22520/1-01
M22520/1-01
Turret Head
M22520/1-02
M22520/1-02
M22520/1-02
20
16
12
INSERTION/REMOVAL TOOLS
FOR PT-SE, SP-SE, MS/PT-SE
(MIL-DTL-26482, Series 1) Connectors
Insertion Tool
Removal Tool
Contact Size
MS
MS
Amphenol®
Amphenol®
Contact Insertion
Tool
Amphenol®
Contact
Removal Tool
Part Number
Contact Removal
Tool
Part Number Con-
tact Insertion Tool
Contact
Insertion Pliers
20
16
12
11-8107-20
11-8107-16
-
11-7401-20
11-7401-16
-
M81969/17-03
M81969/17-04
M81969/17-05
11-7880-20
11-7880-16
-
M81969/19-07
M81969/19-08
M81969/19-09
42
Contacts - Power and Thermocouple Crimp
for miniature cylindrical connectors
The following tables provide part number information for crimp contacts used in Amphenol® Miniature Cylindrical
Connectors. For additional information, consult Amphenol, Sidney, NY.
CRIMP CONTACTS for MIL-DTL-26482, Series 1
(PT-SE, SP-SE) Connectors
Pins
Sockets
Accommodates
Wire Size
Contact Size
Amphenol®
Proprietary
Number
Amphenol®
Proprietary
Number
MS Number
MS Number
20, 22 & 24
AWG
20
M39029/31-240 10-683787-20P
M39029/31-228 10-683788-16P
M39029/31-235 10-807100-125
10-330930-20F
M39029/32-259 10-731210-3D1
M39029/32-247 10-679379-16D
M39029/32-254 10-807103-125
10-807155-205
16, 18 & 20
AWG
16
12
12 & 14 AWG
16 AWG
20-16
16-20
12-10
20 AWG
10-330932-16F
10-330933-16F
12 AWG
10-330938-12F
10-330939-12F
THERMOCOUPLE CONTACTS for Miniature Connectors
Pins
Sockets
Proprietary Part Number
Proprietary Part Number
Size
Material
SE
SE
Chromel
Alumel
10-330940-21P
10-330940-21S
16 Crimp Termination
10-330940-22P
10-330940-1P
10-330940-2P
10-330940-3P
10-330940-4P
10-330940-22S
10-330940-1S
10-330940-2S
10-330940-3S
10-330940-4S
Chromel
Alumel
20 Crimp Termination
Iron
Constantan
See L-776 for thermocouple contact termination instructions. These are online at www.amphenol-industrial.com
For PCB contacts for miniature connectors, see page 20.
43
Coaxial Contacts
for miniature cylindrical connectors
Amphenol® Miniature Connectors can incorporate shielded coax
contacts. The Miniature family is built around MIL-DTL-26482
specifications,ꢀwithꢀMil-approvedꢀandꢀproprietaryꢀstylesꢀoffered.ꢀ
Normal operating voltage for Miniature cylindricals with power only
contactsꢀisꢀupꢀtoꢀ1,000ꢀVACꢀ(RMS)ꢀatꢀseaꢀlevel.
Table 1: Miniature Cylindricals offer these features for contact
termination
flexibility:
Solder Coax Contact
for use in Miniature Solder Type Connectors
•
•
•
•
•
Several insert arrangements that can incorporate:
Sizeꢀ8ꢀ&ꢀ12ꢀCrimpꢀCoaxꢀcontactsꢀforꢀCrimpꢀtype
Sizeꢀ8ꢀ&ꢀ12ꢀSolderꢀCoaxꢀcontactsꢀforꢀSolderꢀtype
Wideꢀselectionꢀofꢀconnectorꢀshellꢀstylesꢀandꢀsizes
Standard power contact options within the various connector
styles include: solder type, crimp front release, crimp rear release
Coax contacts are designed to the same high performance
standards as power contacts. Coax and power contacts may be
intermixed with no degradation of connector reliability.
No mis-mating or cross-plugging with insert rotation and keyway
polarization.
•
•
Table 2: GENERAL ORDERING INFORMATION
Amphenol Miniature Cylindricals are normally supplied with a full
complement of power contacts, separately packaged. Coax contacts
are ordered by part number as referenced in the part number charts
on the following pages of this catalog, and are substituted for the
power contacts at the time of the cable or equipment assembly. If
the application is for coax only, the connector may be ordered less
contacts and no power contacts will be supplied.
Pin Crimp Coax Contact
for use in Miniature Crimp SE Type Connectors
Installation instructions for the coax contacts for Miniature
Connectors are provided in Amphenol documents as follows: L-633 for
solderꢀtype;ꢀL-613ꢀforꢀSEꢀtype.
HOW TO ORDER:
A.
Select the coax contacts designed for the cable being used
from the applicable charts in this catalog for each Miniature
type (solder, SE).
Select a connector insert from those shown on pages 4-5
whichꢀwillꢀaccommodateꢀtheꢀquantityꢀandꢀsizeꢀofꢀcoaxialꢀꢀ
contacts needed plus any power contacts required. Note:
Sizeꢀ8Sꢀandꢀ12Sꢀcontactsꢀareꢀusedꢀwithꢀconnectorꢀinsertsꢀꢀ
throughꢀshellꢀsizeꢀ18ꢀonly.ꢀForꢀlargerꢀconnectorꢀshellꢀsizes,ꢀꢀ
useꢀsizeꢀ8Lꢀcontacts.
DetermineꢀtheꢀMiniatureꢀCylindricalꢀtype,ꢀshellꢀstyle,ꢀfinish,ꢀꢀ
service class and insert rotation required for your application.
Consult Amphenol, Sidney NY with the pertinent cable,
contact, insert arrangement and connector style choices for
complete connector part number.
B.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Socket Crimp Coax Contact
for use in Miniature Crimp SE Type Connectors
C.ꢀꢀ
ꢀ
D.
44
Coaxial Contacts
for miniature cylindrical connectors, cont.
Amphenol® Coaxial Contacts designed for use
TYPICAL MINIATURE CRIMP COAX
SOCKET CONTACT has crimp socket outer
contact with a solder pin inner contact
inꢀMiniatureꢀCylindricalꢀConnectorsꢀofferꢀtheꢀsameꢀ
durabilityꢀadvantagesꢀandꢀdesignꢀbenefitsꢀforꢀreliableꢀ
interconnection as the Amphenol coax contacts used
in high performance D38999 connectors. A variety
of military and commercial shielded cables are
accommodated within the miniature cylindrical series.
Amphenol supplies coax contacts for solder and crimp
SE connector styles.
Other features of the coax for miniature cylindricals include:
•
Miniature coax design has an outside nut within the
assembly for fast, reliable assembly of contact to
cable.
All types feature solder style inner contacts and
crimp style outer contacts for reliable cable
termination
•
•
•
Miniature coax crimp type contacts are designed for
use in Miniature crimp series connectors
Miniature coax solder type contacts are designed
for use in Miniature solder series connectors. These
come pre-installed into the solder connector.
TYPICAL MINIATURE CRIMP COAX PIN
CONTACT has crimp pin outer contact
with a solder socket inner contact
TYPICAL ELECTRICAL PERFORMANCE
Size 8 and 12 Coax Contacts
Contact Resistance:
Center @ 1 Amp, 170 millivolts max. voltage drop @ 25°C
Outer @ 12 Amps, 150 millivolts max. voltage drop @ 25°C
Dielectric Withstanding Voltage:
ꢀ
ꢀ
ꢀ
Sizeꢀ8:ꢀ1,300ꢀVACꢀRmsꢀ@ꢀseaꢀlevel
Sizeꢀ12:ꢀ1,000ꢀVACꢀRmsꢀ@ꢀseaꢀlevel
Sizeꢀ8ꢀ&ꢀ12:ꢀ250ꢀVACꢀRmsꢀ@ꢀ50,000ꢀft.
Insulation Resistance
5,000 megohms minimum @ 25°C
TypicalꢀVSWRꢀforꢀsizeꢀ8ꢀ&ꢀ12ꢀPT-SEꢀTypesꢀIIꢀ&ꢀIIIꢀonly:
1.2ꢀ+ꢀ.12Fꢀ(GHz)ꢀupꢀtoꢀ10ꢀGHz
ꢀ
ꢀ
EXPLANATION OF TYPE CLASSIFICATIONS:
PT-SE Type I
PT-SE Type II
is moisture seal design with internal O-ring.
is 50 ohm impedance matched version. Contacts
terminated to other than 50 ohm cables are therefore not matched.
PT-SE Type III is 50 ohm contact, non-serviceable after assembly.
Solders are non-impedance matched contacts.
CONTACT FINISHES:
SuffixꢀFinish
ꢀ
1ꢀ
2
3
4
5
E
0.00020ꢀmin.ꢀsilverꢀoverꢀcopperꢀflash
0.00005 min. gold (Knoop hardness 130-200) over silver
0.00010 min. gold (Knoop hardness 130-200) over silver
0.00010 min. gold (Knoop hardness 130-200) over copper
0.00005 min. gold (Knoop hardness 130-200) over nickel
0.00005 min. gold (Knoop hardness 90 max.) over copper
0.00005 min. gold (Knoop hardness 130-200) over copper
F
H
0.00010 min. gold (Knoop hardness 130-200) o4ve5r copper
Coaxial Contacts
for miniature cylindrical connectors, cont.
solder (MIL-DTL-26482 Series 1 type) - application data
MATING
PIN DIA
H
L
F
G
SOCKET
L
H
F
MATING
G
PIN DIA
PIN
SOLDER COAX CONTACTS
For use in Miniature Solder Type Connectors: PT, SP, and MS/PT Styles
Dimensional Data
(See Drawings above)
Contact Part Number
Crimp Ferrule Tools
Retainer
Nut
Wrench
Contact
Size
Cable
F
MIL-T-22910/7-1
Tool
Use with Die Part
Number
MIL-C-22520/5-01
Tool
Use with Die Part
Number
MIL-C-22520/10-01
Tool
Use with Die Part
Number
L
H
Dia.
0.001
G
Dia.
Across
Flats
0.00ꢀ
Length Ref.
Pin
Socket
Pin
Socket
RG-58C/U,
RG-141A/U,
RG-303/U
0.040
0.001
M22520/5-05 (B)
M22520/5-41 (B)
21-33020-2
21-33019-2
8S
0.219
0.280
1.114
1.115
M22910/7-15 (B)
M22910/7-18 (B)
M22910/7-16 (B)
M22520/10-07 (B)
11-8676-2
11-8676-3
11-8678-2
0.040
0.001
RG-59B/U,
RG-62A/U,
RG-62B/U,
RG-210/U
21-33020-1
21-33020-3
21-33019-1
21-33019-3
8L
8S
0.219
0.219
0.280
0.280
1.176
1.114
1.177
1.115
M22520/5-45 (B)
M22520/5-43 (B)
0.040
0.001
RG-142B/U,
Times
MI51115
0.040
0.001
21-33020-7*
21-33020-32*
21-33019-7*
21-33019-32*
8S
0.219
0.140
0.280
0.172
1.114
1.092
1.115
1.093
RG-161/U,
RG-174A/U,
RG-179B/U,
RG-187A/U,
RG-188A/U,
RG-316/U
M22520/5-03 (A)
M22520/5-08 (A)
M22520/5-35 (B)
0.0300
0.0005
12S
M22910/7-12 (B)
M22520/10-05 (A)
11-8676-1
0.040
0.001
M22520/5-03 (B)
M22520/5-33 (B)
RG-178B/U
RG-196A/U
21-33020-4
21-33019-4*
8S
0.219
0.140
0.280
0.172
1.114
1.092
1.115
1.093
M22910/7-11 (B)
M22910/7-11 (B)
M22520/10-05 (B)
M22520/10-05 (B)
11-8676-2
11-8676-1
0.0300
0.0005
M22520/5-03 (B)
M22520/5-33 (B)
21-33020-31†
21-33061-31*†
12S
RG-180B/U,
RG-195A/U,
Raychem
0.040
0.001
M22520/5-05 (B)
M22520/5-41 (B)
21-33020-5*
21-33019-5*
8S
0.219
0.280
1.114
1.115
M22910/7-15 (B)
M22520/10-07 (B)
M22520/10-07 (B)
11-8676-2
5022D1312-9
Raychem
5021D1331-9
0.040
0.001
M22520/5-05 (B)
M22520/5-41 (B)
21-33020-6*
21-33020-33
21-33019-6*
21-33061-33
8S
0.219
0.140
0.280
0.172
1.114
1.092
1.115
1.093
M22910/7-15 (B)
M22910/7-13 (B)
11-8676-2
11-8676-1
Thermatics
2929-29
0.0200
0.0005
12S
M22520/5-37 (B)
NOTE: Contacts can be ordered by part numbers given in chart
* Consult Amphenol, Sidney NY for availability
NOTE:ꢀSizeꢀ8Sꢀandꢀ12Sꢀcontactsꢀareꢀusedꢀwithꢀconnector
CRIMPINGꢀTOOLS:ꢀItalicizedꢀlettersꢀinꢀparenthesisꢀthatꢀfollowꢀpositioner
part numbers indicate applicable die closure. Commercial
equivalents with the same die closure dimension may be used.
† 21-33020-31 and 21-33061-31 only mate with each other
ꢀ
ꢀ
insertsꢀthroughꢀshellꢀsizeꢀ18ꢀonly.ꢀForꢀlargerꢀconnectorꢀshell
sizes,ꢀuseꢀsizeꢀ8Lꢀcontacts.
CONTACT FINISH: For all contacts in this series feature
0.000050 minimum gold (Knoop hardness 130-200).
46
Coaxial Contacts
for miniature cylindrical connectors, cont.
crimp SE (MIL-DTL-26482 Series 1 type) - application data
L
L
F
G
H
G
H
MATING
PIN DIA
MATING
PIN DIA
F
SOCKET
PIN
NOTE:ꢀAllꢀcontactsꢀofꢀtheꢀsameꢀsizeꢀandꢀtheꢀsameꢀinnerꢀandꢀ
outer contact diameters (G & H) will mate with each other.
SE CRIMP COAX CONTACTS
For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, and MS/PT-SE Styles
Dimensional Data (See Drawings above)
Installation Tools
Contact Part Number
Crimp Ferrule Tools
Finish
on
Mating
Parts
L Length Ref.
Pin Socket
Contact
Size
Retainer Nut
Wrench
F
Cable
Type
H
Dia.
±±.±±0
MIL-T-2290±/7-0
Tool
Use with Die Part
Number
MIL-C-2252±/5-±0 MIL-C-2252±/0±-±
G
Dia.
Across
Flats
±±.±±ꢀ
Insertion
Removal
Tool
Tool
Pin
Socket
Use with Die Part
Number
Use with Die Part
Number
20-33±02-20
20-33±02-25
20-33±38-20
20-33±38-25*
20-33±00-20
20-33±00-25
20-33±37-20
20-33±37-25
8
8
8
8
I
II
I
2
ꢀ
RG-55B/U,
RG-0ꢀ2A/U,
RG-0ꢀ2B/U,
RG-223/U
±.±355
±±.±±0±
M2252±/5-±5 (A)
M2252±/5-09 (B)
00-8369-5 00-788±-8
00-866±-5 00-805ꢀ-0
±.208
±.208
±.28± 0.056 0.0ꢀꢀ M2290±/7-07 (B)
M2252±/0±-±7 (A)
M2252±/0±-±7 (B)
00-8676-2
00-8676-2
II
20-33038-20( )* 20-33037-20( )*
20-33038-25( )* 20-33037-25( )*
8
8
I
II
**
20-33±02-22
20-33±02-26
20-33±38-22*
20-33±38-26*
20-33±00-22
20-33±00-26
20-33±37-22
20-33±37-26*
8
8
8
8
I
II
I
2
ꢀ
RG-58C/U,
RG-0ꢀ0A/U,
RG-3±3/U
±.±355
±±.±±0±
M2252±/5-±5 (B)
M2252±/5-ꢀ0 (B)
00-8369-ꢀ 00-788±-8
00-866±-ꢀ 00-805ꢀ-0
±.28± 0.056 0.0ꢀꢀ M2290±/7-05 (B)
II
20-33038-22( )* 20-33037-22( )
20-33038-26( )* 20-33037-26( )*
8
8
I
II
**
20-33±02-36
20-33±38-36*
20-33±00-36
20-33±37-36
8
8
II
II
2
ꢀ
RG-59B/U,
RG-62A/U,
RG-62B/U,
RG-20±/U
±.±355
±±.±±0±
00-8369-5 00-788±-8
00-866±-5 00-805ꢀ-0
±.208
±.208
±.28± 0.056 0.0ꢀꢀ M2290±/7-08 (B)
±.28± 0.056 0.0ꢀꢀ M2290±/7-07 (B)
M2252±/5-ꢀ5 (B)
00-8676-3
00-8676-2
20-33038-36( )* 20-33037-36( )
8
8
8
8
8
8
8
8
8
8
II
II
II
II
I
II
I
II
I
II
I
II
**
2
20-33±02-37*
20-33±38-37*
20-33±00-37*
20-33±37-37*
RG-0ꢀ±/U,
RG-3±2/U
±.±355
±±.±±0±
M2252±/5-±5 (A)
M2252±/5-09 (B)
00-8369-5 00-788±-8
00-866±-5 00-805ꢀ-0
ꢀ
M2252±/0±-±7 (A)
20-33038-37( )* 20-33037-37( )*
**
2
20-33±02-3ꢀ
20-33±02-3±
20-33±38-3ꢀ
20-33±38-3±
20-33038-3ꢀ( )* 20-33037-3ꢀ( )*
20-33038-3±( )* 20-33037-3±( )*
20-33±00-3ꢀ
20-33±00-3±
20-33±37-3ꢀ
20-33±37-3±
±.±355
±±.±±0±
00-788±-8
00-805ꢀ-0
ꢀ
**
2
±.208
±.028
±.28± 0.056 0.0ꢀꢀ
00-8676-2
00-8676-0
RG-060/U,
RG-07ꢀA/U,
RG-079B/U,
RG-087A/U,
RG-088A/U,
RG-306/U
M2252±/5-±3 (A)
M2252±/5-±8 (A)
M2252±/5-35 (B)
00-8369-2
00-866±-2
20-33±02-0
20-33±02-ꢀ
20-33±00-0
20-33±00-ꢀ
02
02
M2290±/7-02 (B)
M2252±/0±-±5 (A)
20-33±38-0*
20-33±38-ꢀ
20-33±37-0*
20-33±37-ꢀ*
02
02
I
II
±.±2±±
±±.±±±5
00-788±-02
00-805ꢀ-2
ꢀ
±.072 0.±92 0.±72
20-33038-0( )*
20-33038-ꢀ( )*
20-33037-0( )
20-33037-ꢀ( )*
02
02
I
II
**
20-33±02-35
20-33±38-35
20-33±00-35
20-33±37-35
8
8
8
I
I
I
2
ꢀ
±.±355
±±.±±0±
00-788±-8
00-788±-8
±.208
±.028
±.28± 0.056 0.0ꢀꢀ
00-8676-2
00-8676-0
20-33038-35( )* 20-33037-35( )*
**
RG-078B/U,
RG-096A/U
M2252±/5-±3 (B)
M2252±/5-33 (B)
00-8369-0
00-866±-0
20-33±02-3*
20-33±02-5
20-33±38-3*
20-33±38-5
20-33038-3( )*
20-33038-5( )*
20-33±00-3*
20-33±00-5
20-33±37-3*
20-33±37-5*
20-33037-3( )*
20-33037-5( )*
02
02
02
02
02
02
I
II
I
II
I
M2290±/7-00 (B)
2
ꢀ
±.±2±±
± ±.±±±5
00-788±-02
00-805ꢀ-2
±.072 0.±92 0.±72
**
II
NOTE: Contacts can be ordered by part numbers given in chart
**ꢀSeeꢀfinishꢀoptionsꢀforꢀSEꢀcrimpꢀMiniatureꢀcontactsꢀlistedꢀonꢀꢀ
page 44. Replace the parenthesis of the contact part number with
theꢀfinishꢀsuffixꢀnumber.ꢀHowever,ꢀyouꢀshouldꢀconsultꢀAmphenol,ꢀ
Sidney,ꢀNYꢀregardingꢀtheꢀavailabilityꢀofꢀallꢀfinishꢀchoicesꢀforꢀeachꢀ
part number.
CRIMPINGꢀTOOLS:ꢀItalicizedꢀlettersꢀinꢀparenthesisꢀthatꢀfollowꢀ
positioner part numbers indicate applicable die closure.
Commercial equivalents with the same die closure dimension may
be used.
CHART CONTINUES ON NEXT PAGE
* Consult Amphenol, Sidney NY for availability
47
Coaxial Contacts
for miniature cylindrical connectors, cont.
crimp SE (MIL-MDL-26482 Series 1 type) - application data, cont.
SE CRIMP COAX CONTACTS
For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, and MS/PT-SE Styles
Dimensional Data
Installation Tools
Contact Part Number
Crimp Ferrule Tools
Finish
on
Mating
parts
Retainer
Nut
L Length Ref.
Pin Socket
Contact
Size
F
Cable
Type
H
Dia.
G
Dia.
Across
Wrench
MIL-T-2290±/7-0 ꢀ7MIL-C-2252±/5-±0 MIL-C-2252±/0±-±
Insertion
Removal
Flats
Tool
Tool
Tool
±±.±±0
±±.±±ꢀ
Pin
Socket
Use with Die Part
Number
Use with Die Part
Number
Use with Die Part
Number
20-33±02-2ꢀ
20-33±02-ꢀ6*
20-33±00-2ꢀ
20-33±00-ꢀ6*
8
8
I
II
2
ꢀ
RG-08±B/U,
RG-095A/U
20-33±38-2ꢀ
20-33±38-ꢀ6*
20-33±37-2ꢀ
20-33±37-ꢀ6*
8
8
I
II
±.±355
± ±.±±0±
M2252±/5-±5 (B)
M2252±/5-ꢀ0 (B)
00-8369-ꢀ
00-866±-ꢀ
00-788±-8
00-805ꢀ-0
±.208
±.028
±.028
±.28± 0.056 0.00ꢀ M2252±/7-05 (B)
M2252±/0±-±7 (B) 00-8676-2
20-33038-2ꢀ( )* 20-33037-2ꢀ( )*
20-33038-ꢀ6( )* 20-33037-ꢀ6( )*
8
8
I
II
**
Raychem
9527E0008,
RG-08±B/U,
RG-095A/U
±.±2±±
± ±.±±±5
Daniels GS2±± Tool with G2P33± or
M2252±/30-±0 Tool with Positioner M2252±/30-±2
00-788±-02
00-805ꢀ-2
20-330±6-ꢀ±( ) 20-330±5-ꢀ±( )
02
III
**
±.899 ±.879
00-867ꢀ-2
20-33±02-6*
20-33±02-7*
20-33±00-6*
20-33±00-7*
02
02
I
II
2
ꢀ
RG-088 or
RG-306
Double Braid
20-33±38-6*
20-33±38-7*
20-33±37-6*
20-33±37-7*
02
02
I
II
±.±2±±
± ±.±±±5
00-8369-2
00-866±-2
00-788±-02
00-805ꢀ-2
±.072 0.±92 0.±72
00-8676-0
20-33038-6( )* 20-33037-6( )*
20-33038-7( )* 20-33037-7( )*
02
02
I
II
M2290±/7-03 (B)
M2252±/5-37 (B)
**
20-33±02-ꢀꢀ
20-33±38-ꢀꢀ*
20-33±00-ꢀꢀ
20-33±37-ꢀꢀ*
8
8
8
8
8
8
II
II
II
I
2
ꢀ
Thermax
5±C-25ADS-0
±.±355
± ±.±±0±
00-8369-ꢀ
00-866±-ꢀ
00-788±-8
00-805ꢀ-0
±.028
±.028
±.28± 0.056 0.0ꢀꢀ
00-8676-2
00-8676-2
20-33038-ꢀꢀ( )* 20-33037-ꢀꢀ( )*
**
2
20-33±02-28
20-33±38-28*
20-33±00-28
20-33±37-28*
RG-095
Double Braid
±.±355
± ±.±±0±
00-8369-ꢀ
00-866±-ꢀ
00-788±-8
00-805ꢀ-0
I
ꢀ
±.28± 0.056 0.0ꢀꢀ M2290±/7-06 (B)
M2252±/5-ꢀ3 (B)
20-33038-28( )* 20-33037-28( )*
I
**
20-33±02-23
20-33±02-27
20-33±00-23
20-33±00-27
8
8
I
II
2
ꢀ
RG-022/U,
Raychem
5±22E5000
20-33±38-23*
20-33±38-27
20-33±37-23*
20-33±37-27
8
8
I
II
±.±355
± ±.±±0±
M2252±/5-±5 (B)
M2252±/5-ꢀ0 (B)
00-8369-ꢀ
00-866±-ꢀ
00-788±-8
00-805ꢀ-0
20-33038-23( )* 20-33037-23( )*
20-33038-27( )* 20-33037-27( )*
8
8
I
II
±.208
±.28± 0.056 0.0ꢀꢀ M2252±/7-05 (B)
M2252±/0±-±7 (B) 00-8676-2
**
20-33±02-30
20-33±38-30
20-33±00-30
20-33±37-30
8
8
8
8
8
8
I
I
2
ꢀ
Raychem
953±D530ꢀ
20-33038-30( )* 20-33037-30( )*
I
**
2
20-33±02-39
20-33±38-39*
20-33±00-39
20-33±37-39*
II
II
II
Raychem
9527A0307
±.±355
± ±.±±0±
M2252±/5-±5 (B)
M2252±/5-ꢀ0 (B)
00-8369-ꢀ
00-866±-ꢀ
00-788±-8
00-805ꢀ-0
ꢀ
±.208
±.208
±.28± 0.056 0.0ꢀꢀ M2290±/7-05 (B)
±.28± 0.056 0.0ꢀꢀ M2290±/7-02 (B)
M2252±/0±-±7 (B) 00-8676-2
M2252±/0±-±5 (A) 00-8676-2
20-33038-39( )* 20-33037-39( )*
**
20-33±02-ꢀ±*
20-33±38-ꢀ±*
20-33±00-ꢀ±
20-33±37-ꢀ±*
8
II
2
M2252±/5-±3 (A)
M2252±/5-±8 (A)
M2252±/5-35 (B)
Raychem
7527A0308
±.±355
± ±.±±0±
00-8369-2
00-866±-2
00-788±-8
00-805ꢀ-0
8
8
II
II
II
II
ꢀ
**
2
20-33038-ꢀ±* 20-33037-ꢀ±( )*
20-33±02-ꢀ3
20-33±38-ꢀ3
20-33±00-ꢀ3
20-33±37-ꢀ3
02
02
Westrex
099-ꢀ9-0,
Tensolite
±.±2±±
± ±.±±±5
M2252±/5-±3 (B)
M2252±/5-33 (B)
00-8369-0
00-866±-0
00-788±-02
00-805ꢀ-2
ꢀ
±.028
±.072 0.±92 0.±72 M2290±/7-00 (B)
M2252±/0±-±5 (B) 00-8676-0
3±85±/87T-0
20-33038-ꢀ3( )* 20-33037-ꢀ3( )*
02
II
**
NOTE: Contacts can be ordered by part numbers given in chart
**ꢀSeeꢀfinishꢀoptionsꢀforꢀSEꢀcrimpꢀMiniatureꢀcontactsꢀlistedꢀonꢀpageꢀ44.ꢀ
Replaceꢀtheꢀparenthesisꢀofꢀtheꢀcontactꢀpartꢀnumberꢀwithꢀtheꢀfinishꢀsuffixꢀ
number. However, you should consult Amphenol, Sidney, NY regarding the
availabilityꢀofꢀallꢀfinishꢀchoicesꢀforꢀeachꢀpartꢀnumber.
CRIMPINGꢀTOOLS:ꢀItalicizedꢀlettersꢀinꢀparenthesisꢀthatꢀfollowꢀ
positioner part numbers indicate applicable die closure.
Commercial equivalents with the same die closure dimension
may be used.
* Consult Amphenol, Sidney NY for availability
48
Mounting Recommendations
for miniature cylindrical connectors
FLANGE MOUNTED CONNECTORS
AllꢀflangeꢀmountingꢀPTꢀconnectorsꢀuseꢀstandardꢀMSꢀmountingꢀdimensions.ꢀ
They cannot be back panel mounted due to coupling clearance. The PTB
(thru-bulkhead) type connector must also be back panel mounted on one side.
Flange gaskets are available for both series, see page 37.
FLANGE MOUNTED CONNECTORS
R (TP)
D Dia.
Shell Size
4 HOLES
No. 4 Screw
for PC & PT
No. 6 Screw
for SP and for
Size 24 PT
R
PT, PTB
.469
SP
PT
.323
SP, PTB
.439
.120 Dia. for Shell Sizes 6-22
PC & PT
(TP)
6
.641
.147 Dia. for
Size 24 PT
.150 Dia. for
SP only
8
.594
.734
.449
.563
10
12
14
16
18
20
22
24
.719
.812
.573
.680
D Dia.
.812
.938
.699
.859
.906
1.031
1.125
1.203
1.297
1.375
1.449
.823
.984
R
2
.969
.949
1.108
1.233
1.358
1.483
-
1.062
1.156
1.250
1.375
1.073
1.199
1.323
1.449
R
2
SECTION
CUT-OUT
JAM NUT MOUNTINGS
The jam nut design has become very popular because it allows bench wiring of
harnessꢀassemblies.ꢀTheꢀlaborꢀsavingꢀoftenꢀoffsetsꢀtheꢀaddedꢀcostꢀofꢀtheꢀjamꢀ
nut receptacle which is due to the self contained “O” ring and the extra nut.
R
+.010
-.000
B
+.000
-.010
P Panel Thickness
Min. Max.
.062 .125
F
.010
Shell Size
B
6
.447
.420
.286
.331
.375
.442
.486
.530
.573
.641
.685
-
R
8
.572
.542
.062
.062
.062
.062
.062
.062
.062
.062
.062
.125
.125
.125
.125
.125
.125
.250
.250
.250
10
12
14
16
18
20
22
24
.697
.669
.884
.830
1.007
1.134
1.259
1.384
1.507
1.634
.955
1.084
1.208
1.333
1.459
1.575
CUT-OUT FOR
PT ONLY
SECTION
HERMETIC RECEPTACLE MOUNTINGS
HERMETIC RECEPTACLES
Shell
Size
N
Max.
This series must be mounted in such a way as to preserve the
hermetic seal provided by the glass insert. Mounting data for
box and jam nut receptacles is given above. Cut-out required for
solder mounting receptacles (N) is given below.
6
.458
N
8
10
.582
.692
Theꢀfinishꢀofꢀeachꢀofꢀtheseꢀhermeticꢀreceptaclesꢀisꢀfusedꢀelectro-
deposited tin for easy solderability, and protected by a special
lacquer for optimum shelf life. The lacquer will not interfere with
any soldering operation.
12
.801
14
16
18
20
22
24
.926
1.051
1.176
1.395
1.375
1.520
Low temperature solder should be used and the addition of a
solderꢀfilletꢀatꢀarrowꢀpointsꢀonꢀdrawingꢀatꢀrightꢀisꢀrecommended.
Careꢀmustꢀbeꢀtakenꢀthatꢀtheꢀoperatingꢀtemperatureꢀofꢀtheꢀfinalꢀ
assembly does not rise above the melting point of tin (440° F).
JAM NUT
RECEPTACLE
(See dimensions
above)
BOX
SOLDER
RECEPTACLE
CUT-OUT
RECEPTACLE
(See dimensions
above)
49
Other Amphenol Miniature Cylindrical
Connectors
Geophysical Miniature Cylindricals
Designed for the Geophysical industry’s rugged
environments, the Amphenol® RPT Series connector
has custom features that provide reliability in extreme
temperature and moisture conditions.
The unique shell design provides stronger shells along
withꢀanꢀanodizedꢀ(non-conductive)ꢀfinishꢀforꢀgreaterꢀ
salt, corrosion and abrasion resistance. Coupling nuts
are manufactured with round detent holes and are sold
separatelyꢀforꢀgreaterꢀcustomerꢀflexibility.
Seeꢀproductꢀdataꢀsheetꢀ#146.
RJ Field Bayonet Cylindricals
Amphenol PCD division provides MIL-DTL-26482 bayonet
coupling cylindrical connectors with an RJ45 Ethernet
interface*. These are designed for use in all levels of harsh
environments from industrial to mil-aero applications
providingꢀIP67ꢀprotectionꢀfromꢀdust,ꢀfluids,ꢀvibration,ꢀshockꢀ
and traction. The Amphenol® RJ Field allows the use of
Ethernet Class D/Cat 5 and Cat 5e connections for 10 BaseT,
100 Base TX, or 1000 BaseT networks. It works with any
standardꢀRJ45ꢀcordsetꢀwithꢀnoꢀextraꢀtooling.ꢀItꢀalsoꢀoffersꢀ
reinforced EMI protection.
Forꢀmoreꢀinformationꢀgoꢀonlineꢀtoꢀwww.rjfield.comꢀorꢀaskꢀforꢀ
the Field Series brochure.
* RJ Field Bayonet and other Field Series products are available through
AmphenolꢀPCD.ꢀTheseꢀincludeꢀRJFꢀTVꢀwithinꢀMIL-DTL-38999ꢀSeriesꢀIIIꢀ
threaded coupling connectors, and RJF 544 within ECTA push-pull plastic
shell coupling.
50
相关型号:
MS3128E16-8P
MIL Series Connector, 8 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle
AMPHENOL
MS3128E16-8PW
MIL Series Connector, 8 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle
AMPHENOL
MS3128E16-8PY
MIL Series Connector, 8 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle
AMPHENOL
MS3128E16-8PZ
MIL Series Connector, 8 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle
AMPHENOL
MS3128E16-8S
MIL Series Connector, 8 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle,
AMPHENOL
MS3128E16-8SW
MIL Series Connector, 8 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle
AMPHENOL
MS3128E16-8SX
MIL Series Connector, 8 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle
AMPHENOL
MS3128E16-8SY
MIL Series Connector, 8 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle
AMPHENOL
MS3128E16-8SZ
MIL Series Connector, 8 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle
AMPHENOL
MS3128E16-99P
MIL Series Connector, 23 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle
AMPHENOL
MS3128E16-99PW
MIL Series Connector, 23 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle
AMPHENOL
MS3128E16-99SY
MIL Series Connector, 23 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle
AMPHENOL
©2020 ICPDF网 联系我们和版权申明