PPS-01A05-06SB-002(416) [AMPHENOL]
Circular Connector, 6 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT;型号: | PPS-01A05-06SB-002(416) |
厂家: | Amphenol |
描述: | Circular Connector, 6 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT 连接器 |
文件: | 总13页 (文件大小:1116K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Amphenol
PPS
Push Pull Series
The PPS is a miniature connector with push pull technology and RoHS compliant. It is
designed for use on equipment that is not submersed or left exposed to the elements for
prolonged periods, within Industrial and Ground Harsh Environment applications. To
mate, the plug is pushed onto the receptacle. The connector is locked in its rest position
and is released by pulling back the coupling nut.
The PPS has a small outside diameter and several inserts are available, including high-
density insert arrangements. The plugs can be fitted with EMC grounding fingers for
increased screening effectiveness. Amphenol Ltd offers full cable harness solutions with
overmoulding capabilities or, where preferred, a heat shrink boot can be used.
The plug has a black silver body and backshell with a black coupling nut. Other plating
finishes available are electroless nickel and both are chemical and NBC resistant.
Receptacles are available in black silver plating as standard and electroless nickel. All
metalwork is machined from brass for increased mating durability.
Amphenol
PPS - Insert Availability
RECEPTACLES – SOCKET CONTACTS ONLY
FRONT FACE VIEW
PPS 7 WAY
FRONT FACE VIEW
PPS 6 WAY
FRONT FACE VIEW
PPS 5 WAY
REAR FACE VIEW
PPS 7 WAY
REAR FACE VIEW
PPS 6 WAY
REAR FACE VIEW
PPS 5 WAY
PLUGS – PIN CONTACTS ONLY
FRONT FACE VIEW
PPS 5 WAY
FRONT FACE VIEW
PPS 7 WAY
FRONT FACE VIEW
PPS 6 WAY
REAR FACE VIEW
PPS 7 WAY
REAR FACE VIEW
PPS 6 WAY
REAR FACE VIEW
PPS 5 WAY
- 2 -
Insert Availability / Specifications
INSERT AVAILABILITY
5 # 22 AWG Contacts
05-05
05-06
05-07
6 # 22 AWG Contacts
7 # 22 AWG Contacts
CONTACT SPECIFICATIONS
Contact Resistance
5 mΩ initially
5 mΩ initially
Less than 10 mΩ
Less than 10 mΩ
Shell to Shell Conductivity
INSERT SPECIFICATIONS
Contact Arrangement
05-05 / 05-06 / 05-07
Working Voltage (Sea Level)
DWV (Sea Level)
115 Vac
500 Vac
1GΩ @ 500 Vdc
3A
Insulation Resistance (Sea Level)
Current Rating (Individual Contact)
Current Rating (all Contacts Simultaneously)
1A
ENVIRONMENTAL
-55oC / +85oC
Temperature
Salt Spray
500 hours subject to selected plating finish
As per MIL-C-26482 Series I
Fluids
Vibration and Shock
Sealing
MIL-C-26482 Series I
IP67 Unmated Bulkhead Connectors
IP64 Mated Pair Interface
MECHANICAL
Durability
Materials
1000 Matings
Shell : Brass – See Part No. information for plating options
Contacts : Turned, Gold Plated
Inserts and Seal : Proprietary Thermoplastic Polyester Elastomer
- 3 -
Table of Styles - Receptacles
PPS-07A05-XXSX-001(970)
Jam Nut Receptacle
PCB Contacts
.587
(14.80)
Ø .450 REF
(Ø 11.40)
.262
(6.65)
Ø .150 PCD
(Ø 3.80 PCD)
Ø .030
(Ø 0.78)
.393 A/F
(10.00 A/F)
Ø .300
(Ø 7.60)
.044
.152
.112
(2.85)
Panel Nut - Torque to 2.25Nm = 1.65 foot pounds force
All Dimensions are for reference only
(Dimensions in brackets are in mm)
PPS-07A05-XXSX-002(970)
Jam Nut Receptacle
Solder Bucket Contacts
.587
(14.80)
Ø .450 REF
(Ø 11.40 REF)
.262
(6.65)
.393 A/F
(8.60 A/F)
Ø .300
(Ø 7.60)
.831
(21.20)
Panel Nut - Torque to 2.25Nm = 1.65 foot pounds force
All Dimensions are for reference only
(Dimensions in brackets are in mm)
- 4 -
Table of Styles - Receptacles
PPS-01T05-XXSX-002(970)
In Line Receptacle
Solder Bucket Contacts
CRIMP FERRULE
.466
.770
.314 A/F
(8.00 A/F)
(11.85)
(19.60)
Ø .405
Ø .300
(Ø 10.30) (Ø 7.60)
Ø .150
(Ø 3.80)
All Dimensions are for reference only
(Dimensions in brackets are in mm)
PPS-02T05-XXSX-002(970)
2 Hole Mounting Receptacle
Solder Bucket Contacts
.240
(6.10)
.345
.841
CRIMP FERRULE
Ø .122
(21.40)
(8.75)
(Ø 3.10)
.240
(6.10)
.690
(17.50)
Ø .300
(7.60)
.405
.240
(6.10)
Ø .150
(Ø 3.80)
.314 A/F
(8.00 A/F)
.240
(6.10)
.050
(1.30)
.690
(17.50)
All Dimensions are for reference only
(Dimensions in brackets are in mm)
- 5 -
Table of styles - Receptacles
PPS-02A05-XXSX-001(970)
2 Hole Panel Mount Receptacle
Pin Tail Contacts
.240
(6 10)
.345
(8.75)
Ø .122
(Ø 3.10)
.030
(0.78)
.240
(6.10)
Ø .300
(7.60)
.337
(3.55)
.690
.240
Ø .150 PCD
(Ø 3.80 PCD)
.045
(1.15)
.475
(12.10)
.152
(3.85)
.256
(6.50)
.050
(1.30)
.240
(6.10)
.690
(17.50)
All Dimensions are for reference only
(Dimensions in brackets are in mm)
PPS-02A05-XXSX-002(970)
2 Hole Panel Mount Receptacle
Solder Bucket Contacts
.833
(21.25)
.240
(6.10)
.345
(8.75)
Ø .122
(Ø 3.10)
.240
(6.10)
.337
.690
(17.50)
Ø .300
(Ø 7.60)
.337
(3.55)
.240
(6.10)
Ø .150 PCD
(Ø 3.80 PCD)
.050
(1.30)
.256
(6.50)
.475
(12.10)
.240
.690
(17.50)
(6.10)
All Dimensions are for reference only
(Dimensions in brackets are in mm)
390-0122-01
2 Hole Panel Mount Receptacle Gasket
.044
.042
(1.05)
(1.10)
All Dimensions are for reference only
(Dimensions in brackets are in mm)
Used on PPS-02T and PPS-02A
- 6 -
Table of Styles - Receptacles
Cut Out Details
Ø .123
Ø .121
(Ø 3.15)
(Ø 3.05)
Ø .361 ± .002
HOLE DIAMETER
(9.17MM +/- .051MM
Ø .425
(Ø 10.80)
.095 MIN / .118 MAX
PANEL THICKNESS
.335 ± .002 A/F
(2.4mm MIN / 3mm MAX)
PANEL CUT OUT ACROSS FLATS
(8.51mm +/- .051mm)
.515 CENTRES
(13.05 CENTRES)
All Dimensions are for reference only
(Dimensions in brackets are in mm)
390-5013
Receptacle Dust Cap – Colour Black
.425
(10.8)
.220
5.6mm
.250
(6.4)
All Dimensions are for reference only
(Dimensions in brackets are in mm)
PPS-6XXX-XXX
Jam Nut Receptacle to Header Assembly
LENGTH XX
SEE TABLE 1
MATING HALF
CONNECTOR
RS-311-6546
VARIANT
.025
LENGTH XXX
25MM
.050
50MM
.075
75MM
.100
100MM
125MM
150MM
.125
.150
Panel Nut - Torque to 2.25Nm =1.65 foot pounds force
Please contact Amphenol Ltd for full part numbering information
This is available with the following PPS Receptacle styles and in all Inserts: PPS-07A, PPS-01T, PPS-02A
- 7 -
Table of Styles - Plugs
PPS-06T05-XXPX-XXX
Non Grounded Plug complete with
Backshell and optional Crimp
Ferrule
1.24
Ø .452
(11.50)
.775
(19.75)
.314 A/F
(8.00 A/F)
TABLE 1
PART NUMBER
MAX. CABLE DIAMETER FOR FERRULE
PPS-06T05-XXPX-001
PPS-06T05-XXPX-002
PPS-06T05-XXPX-003
6.5MM
4.3MM
3.2MM
STRAIGHT FERRULE .001
(SEE TABLE 1 FOR SIZES)
TAPERED FERRULE .002
(SEE TABLE 1 FOR SIZES)
All Dimensions are for reference only
(Dimensions in brackets are in mm)
Torque backshells 15 inch lbs
Ferrule
Max. Cable Diameter
Options for Black Zinc Cobalt Plated
001
002
003
Parallel Ferrule
Taper Ferrule
Taper Ferrule
5.6mm O.D.
4.3mm O.D.
3.2mm O.D.
For Crimp Tool details, please refer to the back of this catalogue.
390-5012
Plug Dust Cap – Colour Black
.080
(2.0)
.220
(5.6)
.413
10.6mm
All Dimensions are for reference only
(Dimensions in brackets are in mm)
- 8 -
PPS Heatshrink Boots
For use with PPS-06T and PPS-06TG Plugs and PPS-01T In Line Receptacles
We have selected Heatshrink Boots from Hellermann Tyton. Heatshrink Boots from other manufacturers may
be used if appropriate.
100 Series – Bottle Shapes with Rib – MIL Style
This style is used in conjunction with the
backshell (see page 8), providing strain
relief and environmental sealing
Dimensions apply to all materials unless otherwise
indicated and dimensions in brackets are in mm
Fully recovered form (after heating)
Expanded (Min)
H
Recovered (Max)
Recovered Dimensions Fully Shrunk
Hellermann
Part No
J
P
±10%
R
Jo
HW
JW
T
H
-H
JØ
H
JØ
-H matl
±10%
±10%
±10%
±10%
±10%
matl
0.3976
(10.7)
0.3976
(10.7)
0.1811
(4.6)
0.1811
(4.6)
0.3110
(7.9)
(0.0787)
(2.0)
1.0
(25.4)
0.5709
(14.5)
0.1811
(4.6)
0.0512
(1.3)
0.0512
(1.3)
0.0394
(1.0)
113-4-G-WM250
1100 Series – Right Angle Shapes with Rib – MIL Style
The style provides strain relief for harness
systems when used in conjunction with
the backshell (see page 8)
Dimensions apply to all materials unless otherwise indicated
and dimensions in brackets are in mm
Expanded (Min)
Recovered (Max)
Recovered Dimensions Fully Shrunk
Hellermann
Part No
P
R
S
Jo
W
T
H
JØ
H
JØ
±10%
0.6875
(17.3)
±10%
0.7969
(20.1)
±10%
0.6005
(15.2)
±10%
0.1614
(4.1)
±20%
0.0394
(1.0)
±20%
0.0394
(1.0)
0.6496
(16.5)
0.6496
(16.5)
0.3110
(7.9)
0.1496
(3.8)
1108-4-G-WM250
- 9 -
PPS Cable Assemblies
Amphenol Ltd can supply complete overmoulded cable harness solutions to your specifications. Detailed
below are some examples of what would be available on request. The following templates are of common
harness configurations – please consult factory for cable number allocation
UP TO 7 WAY SINGLE ENDED CABLE ASSEMBLY
XXX METRES
1.705 REF
.930 REF
LOCATOR RIB
END OF CABLE
TO BE
CUT FLUSH
NOTES:
1. THE MAIN KEY OF THE CONNECTOR IS TO BE IN LINE WITH THE LOCATION RIB
ON THE OVERMOULD.
2. ALL DIMENSIONS ARE FOR REFERENCE ONLY.
3. XXX PART NUMBER DENOTES CABLE LENGTH IN METRES
PPS - 5XXX - XXX
CONNECTOR SERIES
CABLE LENGTH
TECHNICAL DESCRIPTION –
CONSULT PRODUCT SUPPORT
PPS@AMPHENOL.CO.UK
All Dimensions are for reference only
(Dimensions in brackets are in mm)
UP TO 7 WAY DOUBLE ENDED CABLE ASSEMBLY
XXX METRES
1.705 REF
.930 REF
LOCATOR RIB
LOCATOR RIB
NOTES:
1. THE MAIN KEY OF THE CONNECTOR IS TO BE IN LINE WITH THE LOCATION RIB
ON THE OVERMOULD.
2. ALL DIMENSIONS ARE FOR REFERENCE ONLY.
3. XXX PART NUMBER DENOTES CABLE LENGTH IN METRES
PPS - 5XXX - XXX
CONNECTOR SERIES
CABLE LENGTH
TECHNICAL DESCRIPTION
CONSULT PRODUCT SUPPORT
PPS@AMPHENOL.CO.UK
All Dimensions are for reference only
(Dimensions in brackets are in mm)
- 10 -
PPS Cable Assemblies
UP TO 7 WAY COILED SINGLE ENDED CABLE ASSEMBLY
XXX METRES
MIN 90MM REF
1.705 REF
.930REF
LOCATOR RIB
END OF CABLE TO BE
CUT FLUSH
NOTES:
1. THE MAIN KEY OF THE CONNECTOR IS TO BE IN LINE WITH THE LOCATION RIB
ON THE OVERMOULD
2. ALL DIMENSIONS ARE FOR REFERENCE ONLY
3. XXX IN PART NUMBER DENOTES CABLE LENGTH IN METRES
PPS - 5XXX - XXX
CONNECTOR SERIES
CABLE LENGTH
TECHNICAL DESCRIPTION
CONSULT PRODUCT SUPPORT
PPS@AMPHENOL.CO.UK
All Dimensions are for reference only
(Dimensions in brackets are in mm)
UP TO 7 WAY COILED DOUBLE ENDED CABLE ASSEMBLY
XXX METRES
MIN 90MM REF
MIN 90MM REF
1.705REF
.930 REF
LOCATOR RIB
LOCATOR RIB
NOTES:
1. THE MAIN KEY OF THE CONNECTOR IS TO BE IN LINE WITH THE LOCATION RIB
ON THE OVERMOULD
2. ALL DIMENSIONS ARE FOR REFERENCE ONLY
3. XXX IN PART NUMBER DENOTES CABLE LENGTH IN METRES
PPS - 5XXX - XXX
CONNECTOR SERIES
CABLE LENGTH
TECHNICAL DESCRIPTION
CONSULT PRODUCT SUPPORT
PPS@AMPHENOL.CO.UK
All Dimensions are for reference only
(Dimensions in brackets are in mm)
Any Cable Assembly Part Number will be issued at quotation or order placement stage by Amphenol Ltd only. For more details
please consult the factory.
- 11 -
PPS Connector Part Numbers
PPS - XX X 05 - XX X X - XXX (970)
Series
Plating Finish
Receptacle Only:
(970) - Black Silver Body and Black
Silver Panel Nut
(416) - Electroless Nickel Body
and Panel Nut
Plugs Only:
Style
(976) – Black Silver Body with
Electroless Nickel Coupling
Nut
06 – Plug, Threaded Shell only
07 – Jam Nut Receptacle
(Plain Shell only)
01 – In Line Receptacle
(Threaded Shell only)
02 – Two Hole Panel Mount Receptacle
Plug Cable Variant
001 – 6.3mm Parallel Ferrule
002 – 4.3mm Taper Ferrule
003 – 3.2mm Taper Ferrule
Receptacle Contact Style
001 – PCB Contacts
Mounting
T – Shell with Accessory Thread
Plug Shells Ungrounded
002 – Solder Bucket Contacts
TG – Shell with accessory Thread and
Grounding Spring for Plug only
A – Plain Shell Receptacle only
Keyway Orientation
A
B
Shell Size
05 only
Contact Type
P – Pin in Plugs only
S – Socket in Receptacle only
Number of Contacts
05 – 5 Contacts
06 – 6 Contacts
07 – 7 Contacts
STANDARD PLATING
Plugs
Omit Deviation – Black Silver Plated Body and Backshell with Black Coupling Nut
- 12 -
PPS – Crimp Tool
For Braid Termination Style 003
Crimp the Braid into place so that the ferrule butts up against the shoulder of the backshell. Use crimp tool
Daniels HX4 M22520/5-01 handle, crimp die set Daniels Y530 CAGE 11851 at setting 180.
Notice: Products are sold subject to Amphenol’s Standard Conditions of Sale. All specifications and statements contained
herein are believed to be correct at the time of printing but no representation or warranty, express or implied, is given as to any
specification or statement contained herein. Product specifications including performance characteristics are typical only and
subject to deviation. Specifications are also subject to change without notice. Users should not assume that all safety
measures are indicated or that other measures may not be required. No representation or warranty, express or implied, is given
that any use of products (including any stated or suggested use) does not infringe any patent, registered design or other third
party rights and no stated or suggested use of products can be taken to recommend any such infringement.
Amphenol
Thanet Way, Whitstable, Kent. CT5 3JF Tel: 01227 773200 Fax: 01227 276571
- 13 -
相关型号:
PPS-01A05-07SA-001(416)
Circular Connector, 7 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
PPS-01A05-07SA-001(970)
Circular Connector, 7 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
PPS-01T05-05SA-002(970)
Circular Connector, 5 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
PPS-01T05-05SB-002(970)
Circular Connector, 5 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
PPS-01T05-06SA-001(416)
Circular Connector, 6 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
PPS-01T05-06SB-002(970)
Circular Connector, 6 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
PPS-01T05-07SA-001(970)
Circular Connector, 7 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
PPS-01T05-07SA-002(970)
Circular Connector, 7 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
PPS-01T05-07SB-001(416)
Circular Connector, 7 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
PPS-01T05-07SB-001(970)
Circular Connector, 7 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
PPS-01T05-07SB-002(970)
Circular Connector, 7 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
PPS-02T05-07SA-001(416)
Circular Connector, 7 Contact(s), Brass, Female, Solder Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
©2020 ICPDF网 联系我们和版权申明