UTVB28-21PX [AMPHENOL]
MIL Series Connector, 37 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle, LEADFREE;型号: | UTVB28-21PX |
厂家: | Amphenol |
描述: | MIL Series Connector, 37 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle, LEADFREE 电视 连接器 |
文件: | 总19页 (文件大小:5093K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UTV
Ruggedized reverse
bayonet connectors
Completely
intermountable with
VG 95234 :
the MS 5015 reverse
bayonet connectors
Description
This connector series is an enhanced
version of the VG 95234 connec-
tor standard but remains completely
intermountable with VG 95234 : the
MS 5015 reverse bayonet connec-
tors.
Features and benefits (see also page 3)
• An interfacial seal is present on the male inserts to extend the creepage distance and to have a better sealing when
the connector is mated.
• The insulator is retained into the plug or receptacle shell by a metallic retaining ring which can be removed with a small
screwdriver. Once removed, user can defined insulator orientation.
• Contacts gauge 8, 12 or 16 are machined crimp contacts, removable thanks to a clip on the contact.
• No tools are needed to insert contacts into the insulator. An extraction tool is available to extract the contacts. The tool
is engaged by the front face of the connector and the contacts are rear released.
• Contacts are crimped thanks to very common toolings.
• The connector is rated 2 levels of water protection (see page 3):
Dynamic IP67/IP68/IP69K when mated and used with suitable accessories, a grommet or a sealed back shell.
• This connector can be supplied fully assembled or in component form (please consult us).
• Corrosion spray resistance is rated up to 500 hours salt spray
• Cadmium and lead free materials are used
122
New UTVruggedized series
New UTV series:
• The ruggedized product range in the TRIM TRIO broadline.
• Using size 16 signal and size 12 & 8 power contacts for up to
30 Amps per contact.
UTV series major technical features & benefits
• Ruggedized full metal reverse bayonet connector
– Enabling 500 mating-unmating without wear out
– Secure locking device
Audible “click” when mating
Visible yellow dot to indicate end of mating cycle
• Dynamic IP68*
• Dynamic IP69K*
Connector will remain IP68 even when:
– Pulling on the cable
Connector withstands high pressure water
cleaning.
– Bending the cable
* With appropriate back shell and grommet
* Exists also in IP67 version
* With appropriate back shell and grommet
• Up to 500 hours salt spray resistance
– Can be used in very severe environment
• Cadmium and lead free materials are used
• In accordance with following standards
– Completely intermountable with VG95234: the MS5015 reverse bayonet connectors
For detailed information on UTV series offering see pages 122 to 139
3
UTV
Description
Receptacle
Yellow marking for locking end indication
Wear pins
Pin contact to
crimp with metallic
retention clip
Retaining insulator ring
Hard Thermoplastic insert
Interfacial seal
Receptacle shell
Plug
Roller
Socket contact to crimp
with metallic retention
clip
Retaining insulator ring
Hard Thermoplastic insert
Plug shell
123
UTV
Technical Features (see also page 3)
Mechanical
Electrical
Environmental
• Mechanical endurance : 500 mating and
unmating
• Contact resistance :
• Climatic category : -40ºC +100ºC
Dry heat test : +100ºC during 96 h
- 2.5 mΩ maxi for contact # 16
- 1.3 mΩ maxi for contact # 12
- 0.9 Ζ Q maxi for contact # 8
following NFF 61030
• Minimum retention force of the contact
in the insulator :
• Corrosion spray resistance : up to
500 hours salt spray
- 70 N for contacts # 16 (1.6 mm)
- 90 N for contacts # 12 (2.4 mm)
- 110 N for contacts # 8 (3.6 mm)
• Damp heat : 21 days, 40°C,
95% relative humidity
•
Maximum current per contact :
- 15 Amps for contact # 16
- 20 Amps for contact # 12
- 30 Amps for contact # 8
•
The connector is rated 2 levels of
water protection (see page 3):
Minimum values with a maximum
displacement of the contact of 0.3 mm
(following NFF 61030)
Dynamic IP67/IP68/IP69K when mated
and used with suitable accessories, a
grommet or a sealed back shell.
• Withstanding voltage :
• Retention of the insulator in the shell :
(following MIL-C-26482G Series 2 class
L standard)
- 2550 Vrms for layouts # 16
- 3250 Vrms for layouts # 12 and 8
•
Cadmium and lead free materials are
used
• Insulation resistance :
• Bayonet coupling mechanism -
- ≥ 5000 MΩ under 500 Vcc
- ≥ 4000 MΩ under 220 Vcc
Coupling torque : following VG 95234
• Vibrations : following NFF 61030
Sinus vibrations : 10 - 100 Hz
Acceleration : 2 g
• Electrical continuity of the shells :
20 mΩ maximum
Material
• In mated conditions
• Shell in aluminium alloy with black
zinc cobalt plating
• Shocks : Acceleration = 30 g
Duration = 18 ms following NFF 61030
(interfacial seal is compression)
minimum creepage distance = minimum
insulation distance in the air :
- 9 mm minimum for layouts with con-
tacts # 16
• Insulator : hard thermoplastic with glass
fiber
• Impact strength (free fall of the plug).
The connector plug is subjected to a
free
fall test. The height of drop is 0.75 m.
No mechanical damage.
• O’ring and interfacial seal in silicone
• Retaining insulator ring in carbon steel
- 12 mm minimum for layouts with con-
tacts # 12 or # 8
This full product range is qualified by ALSTOM, RATP and SNCF.
Robustness and high reliability
of the locking mechanism
Stainless steel wear pin
Stainless steel roller
124
UTV
Connectors Ordering Information
(without contacts and accessories)
Shells, backshells, contacts and accessories have to be ordered separately
UTV
B
22
— 14
P
N
- -
Series
Shell type
Rear mounting receptacle
Plug
B
D
Rear mounting receptacle for PC tails
contact # 16 contacts mounted
C
Shell size : 18 - 20 -22 - 24 - 28 - 32 - 36 - 40
Layouts
Contact type : P - Pin
S - Socket
Insert Orientation : N ; W ; X ; Y ; Z or 0
0 = for insulator not installed in the shell
Modification Code :
Please consult us
Nota : Please consult us if you want to order the connector in component form (shell and insert).
125
UTV
Connector Dimensions
Receptacle
Shell
size
A
Max
B
C
0.2
ØD
Max
E
ØF
Threading G
H
0.1
ØK
-0.15/0
0/+0.4
0.3 0/+0.15 Class 2A
1”x20
UNEF
18
20
45.50
45.50
23.05
23.05
23.05
23.05
4.00
4.00
25.50
28.70
35.00
38.00
3.25
3.25
27.00
29.40
31.80
34.90
39.70
44.50
49.20
55.50
30.80
34.20
37.40
40.90
46.70
53.40
59.60
65.50
1 1/8”x18
UNEF
1 1/4”x18
UNEF
22
24
28
32
36
40
45.50
48.00
48.00
48.00
48.00
48.00
4.00
4.00
4.00
4.00
4.00
4.00
31.90
35.20
41.50
47.90
52.50
59.00
41.00
44.50
50.80
57.00
63.50
70.00
3.25
3.75
3.75
4.35
4.35
4.35
1 3/8”x18
UNEF
1 5/8”x18
UNE
24.05
24.05
24.05
24.05
1 7/8”x16
UN
2 1/16”x16
UNS
2 5/16”x16
UN
Receptacle with PC tails contact
# 16
126
UTV
Panel Cutout
4 holes Ø C
Shell
A
0ꢀ15
B
C
0ꢀ10
Maximum thickness of the panel
for rear mounting
size
18
20
22
24
28
32
36
40
0/+0ꢀ3
27
31,2
34,6
37,8
41,3
47,1
53,8
60
3,4
3,4
3,4
3,9
3,9
4,5
4,5
4,5
3
3
3
3
3
3
3
3
29,4
31,8
34,9
39,7
44,5
49,2
55,5
66,4
Note : The above panel cut-out enables front mounting of all receptacles.
127
UTV
Plug
Shell
size
A
Max
B
Max
C
Max
Threading G
Class 2A
18
45.60
37.30
25.50
1”x 20
UNEF
1 1/8”x 18
UNEF
20
22
24
28
32
36
40
45.60
45.60
45.60
48.10
48.10
48.10
48.10
41.50
44.00
48.50
55.30
62.00
66.80
74.50
28.70
31.90
35.20
41.50
47.90
52.50
59.00
1 1/4”x 18
UNEF
1 3/8”x 18
UNEF
1 5/8”x 18
UNEF
1 7/8”x 16
UN
2 1/6” x 16
UNS
2 5/16”x 16
UN
128
UTV
Layouts (marking on front face of female insulator)
18-19
20-15
22-14
24-10
28-21
Ø 3.6
Ø 5
Ø 3.6
Ø 7
Ø 3.6
10 contacts # 16
7 contacts # 12
19 contacts # 16
7 contacts # 8
37 contacts # 16
32 A13
36 A22
40 A35
40 A60
Ø 5
Ø 5
Ø 5
Ø 3.6
13 contacts # 12
Note : For other layouts: consult factory.
22 contacts # 12
35 contacts # 12
60 contacts # 16
Alternative insert orientation positions
Insulator
weight (g)
Angular displacement of insert
Key
Angular Position N
Layouts
18-19
20-15
N
0
0
0
0
0
0
0
0
0
W
-
X
Y
Z
-
Male Female
120 240
10
13
16
21
25
31
40
75
88
99
80
80
80
80
65
80
70
80
-
-
-
-
280
280
22-14
16
19
27
45
53
61
24-10
28-21
110 250 280
110 250 280
130 230 295
110 250 280
130 230 290
110 250 280
32-A13
36-A22
40-A35
40-A60
63 100
129
UTV
Contacts
Contacts come from our well known
TRIM-TRIO Series.
They are precision solid machined crimp
snap-in pins and sockets for heavy duty
top performance requirements.
Springs on both contacts are made of
spring-tempered, heat treated, beryllium
copper.
The socket inner spring supplies high con-
tact pressure to ensure low-resistance con-
tact between pin and socket. The socket
contact features closed entry to prevent
probe damage. Crimp barrels have insula-
tion grips for vibration support and are
provided with a cable stop and inspection
hole.
Contact accommodation
• “UTV” connectors accept the following
removable snap-lock contacts depending
on the contact layout:
• Size 16 (see contact section page 101)
- RC/RM machined contacts
- SC/SM stamped contacts
Construction
• Contact body :
High conductive copper alloy
• Outer spring :
Tempered, heat treated, beryllium copper
• Inner spring socket :
Tempered, heat treated, plated beryllium copper
- For coax and fiber optic contacts:
consult factory
• Size 12 (see page 131/132)
- 8291 machined contacts
• Size 8 (see page 131/132)
- 8291 machined contacts
Plating table
Au = Gold plated : minimum of 0.4 µ of Gold all over, over nickel coating
Ag = Silver plated 5 µ of silver all over
• Contacts to be ordered separately.
Performance characteristics
Contacts # 16
Contacts # 12
Contacts # 8
Maximum current rating
Contact resistance
13 A
26 A
44 A
≤ 3 mΩ
≤ 5 mΩ
≤ 5 mΩ
Note: For size 16 coax and fiber optic contacts: consult factory.
130
UTV
Contacts Dimensions
Contacts # 16 (1.6 mm)
Contacts # 12 (2.4 mm)
Contacts # 8 (3.6 mm)
Length L = see table page 12
131
UTV
Contacts Part Numbers
Cable
Section
of the conductor
Contact
size
Contact
type
Contact
diameter
Contact
Part number
Protection
Contact
dimensions (mm)
Wire insulator
diameter (maxi)*
mm
mm2
AWG
mm
L
#16
#16
#16
#16
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#8
Male
Female
Male
1.6
1.6
1.6
1.6
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
RM16M23K
RC16M23K
RM14M30K
RC14M30K
0.52 – 1.50
0.52 – 1.50
2.50
20-16
20-16
14
3
Au
Au
Au
Au
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Au
Au
Au
Au
Au
Au
Au
Au
Ag
Ag
Ag
Ag
Ag
Ag
Ag
Ag
26.2
18.2
26.2
18.2
26.8
24.3
26.8
24.3
24.8
22.3
24.8
22.3
26.8
24.3
26.8
24.3
24.8
22.3
24.8
22.3
25.5
25,5
25.5
25,5
25.5
25,5
25.5
25,5
3
3
Female
Male
2.50
14
3
8291 1437 NA
8291 1436 A
0.50
20
20
18
18
16
16
14
4.9
4,9
4,9
4,9
4,9
4,9
4,9
4,9
4,9
4,9
4,9
4,9
4,9
4,9
4,9
4,9
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
Female
Male
0.50
8291 1435 NA 0.75 – 1.00
Female
Male
8291 1434 A
8291 1463 NA
8291 1462 A
8291 1465 NA
8291 1464 A
8291 1437 NK
8291 1436 K
0.75 – 1.00
1.50
Female
Male
1.50
2.50
Female
Male
2.50
14
0.50
20
20
18
18
16
16
14
Female
Male
0.50
8291 1435 NK 0.75 – 1.00
Female
Male
8291 1434 K
8291 1463 NK
8291 1462 K
8291 1465 NK
8291 1464 K
8291 3601 A
8291 3600 A
8291 3603 A
8291 3602 A
8291 3605 A
8291 3604 A
8291 3607 A
8291 3606 A
0.75 – 1.00
1.50
Female
Male
1.50
2.50
Female
Male
2.50
14
1.50
16
16
14
#8
Female
Male
1.50
#8
2.50
#8
Female
Male
2.50
14
#8
4.00
12
#8
Female
Male
4.00
12
#8
6.00
10
10
#8
6.00
Female
Note : Dimensions are not contractual and may be subject to modifications.
* Allowable by the insert
Please consult us
132
UTV
Accessories
Backshells ordering information
UTV
J
C
S
S
18
22
— 00
— 14
00
00
Series
UTV
M
Backnut
Cable clamp
Backshell for PMA tube
Cable clamp with sealing gland
R
C
S
J
K
T
Cable clamp with sealing gland (trumpet)
Cable clamp with sealing gland for shielding
S - Straight backshell E - Elbow backshell
Shell size : 18 - 20 - 22 - 24 - 28 - 32 - 36 - 40
Layout (grommet included) or 00 (without grommet)
Adaptor type : 10 - long 00 - short
Grommet type : M for male or L for female (if grommet needed)
Plug cap: F
ex: VGE1Fxx (xx = shell size)
receptacle cap: E
ex: VGE1Exx (xx = shell size)
Adaptor ordering information
Series
UTV
P
S
18
— 00
00
P - Adaptor with PG outlet*
S - Adaptor for straight backshell
Shell size : 18 - 20 - 22 - 24 - 28 - 32 - 36 - 40
Adaptor type : 10 - long 00 - short
* For metric threading: consult factory
133
UTV
Accessories
Grommet (only when needed on spare parts)
Grommet are delivered with a conical ring
Wire insulator diameter (mm)
Layout
Grommet type
Part number
Mini
Maxi
*
18-19
18-19
20-15
male
female
male
UTVM18-1900
UTVL18-1900
UTVM20-1500
UTVL20-1500
UTVM22-1400
UTVL22-1400
UTVM24-1000
UTVL24-1000
UTVM28-2100
UTVL28-2100
UTVM32A1300
UTVL32A1300
UTVM36A2200
UTVL36A2200
UTVM40A3500
UTVL40A3500
UTVM40A6000
UTVL40A6000
1,2
1,2
1,2
1,2
1,2
1,2
4,2
4,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
2,95
2,95
3,6
20-15
female
male
3,6
22-14
2,95
2,95
6,2
22-14
female
male
24-10
24-10
28-21
28-21
32A13
32A13
36A22
36A22
40A35
40A35
40A60
40A60
female
male
6,2
2,95
2,95
3,6
female
male
female
male
3,6
3,6
female
male
3,6
3,6
female
male
3,6
2,95
2,95
female
* Please consult us if your wire has an insulation diameter over these values, we will propose you another grommet.
Grommet filler plug
Contact
size
Part
number
Color
Photo
# 16
# 12
8500-479
blue
Panel gasket
Dimensions
B 0ꢀ2 C 0/+0ꢀ3 Ø D 0/+0ꢀ3
Shell size
Part number
A
0ꢀ5
38
20
22
24
28
32
36
40
UTVG20
UTVG22
UTVG24
UTVG28
UTVG32
UTVG36
UTVG40
29.4
34.2
37.4
40.9
46.7
53.4
59.6
65.5
4.2
4.2
4.2
5.1
5.1
5.1
5.1
41
31.8
34.9
39.7
44.5
49.2
55.5
44.5
50.8
57
63.5
69.9
4 holes Ø D
134
UTV
Synoptic of straight backshells (for IP67 applications)
Plug
Receptacle
+ + + + + + + + +
U
Cable clamp Cable clamp
with
with
Cable clamp Cable clamp
Cable clamp Cable clamp
Backshell
for
PMA tube
Backshell
for
PMA tube
sealing gland sealing gland
with
with
Cable
clamp
with
sealing
gland
with
sealing
gland
(trumpet
shape to
(trumpet
shape to
sealing
sealing
gland for
shielding
Backnut
gland for
shielding
avoid cable avoid cable
wound)
wound)
UTV RS****00
UTV CS****00
UTV SS****10
UTV SS****00
UTV JS****10
UTV JS****00
UTV KS****10
UTV KS****00
UTV TS****10
UTV TS****00
Synoptic of adaptors
Long
adaptor
with
Short
adaptor
with
NB: IP68 backshells are available under
request
PG
PG
outlet
outlet
UTV PS**0010
UTV PS**0000
135
UTV
Dimensions
Shell 18
Shell 20
Shell 22
Shell 24
Shell 28
Shell 32
Shell 36
Shell 40
****
=
****
=
18-19
****
=
18-00
****
=
20-15
****
=
20-00
****
****
****
****
=
24-00
****
****
****
****
=
****
****
****
=
40A35
36A00 40A60 40A00
=
=
=
=
=
=
=
=
22-14
22-00
24-10
28-21
28-00
32A13
32A00 36A22
A
B
C
D
E
22.5
45.6
18
22.5
45.6
18
22.5
22.5
24
24
24
24
48.1
17
45.6
18
45.6
18
48.1
17
48.1
17
48.1
17
44
44
44
44
47
28,5
48,6
34
28,5
48,6
34
26
26
23
F
48,6
34
48,6
34
58
48
33
48
33
48
33
G
H
K
M
N
P
S
33
35,5
35,5
38,5
38,5
38.5
PMA29
31.5
14/24
45
38.5
PMA29
31.5
14/24
45
52
46
PMA17
23
PMA17
23
PMA23
31
PMA23
31
PMA36
37.5
PMA48
45
7/12
9/14
10/18
38,5
10/18
38,5
22/30
51.5
25/35
57
30
31,5
33,5
33,5
43
43
52
52
T
8/12,5
4/15,5
PG13,5
10/14,5
7/15,5
PG16
13,5/18
9/15,5
PG 21
13,5/18
8,5/19,5
PG21
17/24
9,5/19,5
PG29
17/24
U
PG29
PG36
PG42
Note : Dimensions are not contractual and may be subject to modifications.
⇒
⇒
All backshells are compatible with a grommet and a conical ring.
For cable or PMA tube diameter not included in the above chart please consult us.
Example of rear dimensions calculation
of a shell size 18 connector with a sealing gland
cable clamp backshell without grommet and with a long adaptor
Backshell P/N : UTV JS 18 00 10
Rear dimensions receptacle + backshell :
A + F + M = 94,1 mm
136
UTV
Synoptic of elbow backshells (IP67 applications)
Receptacle
Plug
+ + + +
Cable clamp with
sealing gland
(trumpet shape to avoid
cable wound)
Cable clamp
with sealing
gland for shielding
Cable clamp
with sealing gland
Backshell
for PMA tube
Description
Part number
UTV SE****00
UTV JE****00
UTV TE****00
UTV KE****00
Receptacle
Plug
+
E
U
Description
Part number
Cable clamp
UTV CE****00
NB: IP68 backshells are available under request
137
UTV
Dimensions
Shell 18
Shell 20
Shell 22
Shell 24
Shell 28
Shell 32
Shell 36
Shell 40
****
****
=
18-19
****
=
18-00
****
****
=
20-00
****
=
****
=
****
****
=
****
****
=
28-00
****
****
****
****
=
****
=
40A40
=
=
=
=
=
=
=
40A35
40A60
20-15
22-14 22-00
24-10 24-00
28-21
32A13 32A00 36A22 36A00
A
B
C
D
E
22,5
22,5
22,5
22,5
45,6
46
24
24
24
24
45,6
44
45,6
43,5
25,5
28,5
44
45,6
48,1
41
48,1
48,1
48,1
43,5
26
17,5
20
18
28,5
43
26
26
23
F
44
49
46
59
38,5
PMA36
31,5
14/24
45
60
46
H
K
M
N
P
S
35,5
35,5
38,5
38,5
PMA23
31
38,5
PMA17
23
PMA17
23
PMA23
31
PMA29
31,5
14/24
45
PMA36
37.5
7/12
30
9/14
31,5
33,5
10/18
38,5
10/18
38,5
43
22/30
51,5
33,5
43
52
52
T
8/12,5
4/15,5
PG13,5
10/14,5
7/15,5
PG16
13,5/18
9/15,5
PG 21
13,5/18
8,5/19,5
PG21
17/24
9,5/19,5
PG29
17/24
U
PG29
PG36
PG42
Note : Dimensions are not contractual and may be subject to modifications.
⇒
⇒
All backshells are compatible with a grommet and a conical ring.
For cable or PMA tube diameter not included in the above chart please consult us.
138
UTV
Tooling Data
Contact Size
Contact
size
Contact
type
Contact
Ø mm
Contact
Part number
Crimp tool
Locator
Extraction
tool
mm2
AWG
#16
#16
#16
#16
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#12
#8
Male
Female
Male
1.6
1.6
1.6
1.6
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
RM16M23K
RC16M23K
0.52 - 1.50
20-16
20-16
14
MH860 (M22520/7-01)
MH860 (M22520/7-01)
MH86164G
MH86164G
RX2025GE1
RX2025GE1
0.52 - 1.50
2.50
AF8
(M22520/3-1)
TP1142
(selector on 8)
RM14M30K
RX2025GE1
AF8
(M22520/3-1)
TP1142
(selector on 8)
Female
Male
RC14M30K
2.50
14
RX2025GE1
8291 1437 NA
8291 1436 A
8291 1435 NA
8291 1434 A
8291 1463 NA
8291 1462 A
8291 1465 NA
8291 1464 A
8291 1437 NK
8291 1436 K
8291 1435 NK
8291 1434 K
8291 1463 NK
8291 1462 K
8291 1465 NK
8291 1464 K
8291 3601 A
8291 3600 A
8291 3603 A
8291 3602 A
8291 3605 A
8291 3604 A
8291 3607 A
8291 3606 A
0.50
20
20
18
18
16
16
14
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
M317
VGE10077A
VGE10077A
VGE10077A
VGE10077A
VGE10077A
VGE10077A
VGE10077A
VGE10077A
VGE10077A
VGE10077A
VGE10077A
VGE10077A
VGE10077A
VGE10077A
VGE10077A
VGE10077A
VGE10078A
VGE10078A
VGE10078A
VGE10078A
VGE10078A
VGE10078A
VGE10078A
VGE10078A
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.24
5106.021.09.36
5106.021.09.36
5106.021.09.36
5106.021.09.36
5106.021.09.36
5106.021.09.36
5106.021.09.36
5106.021.09.36
Female
Male
0.50
0.75 - 1.00
0.75 - 1.00
1.50
Female
Male
Female
Male
1.50
2.50
Female
Male
2.50
14
0.50
20
20
18
18
16
16
14
Female
Male
0.50
0.75 - 100
0.75 - 100
1.50
Female
Male
Female
Male
1.50
2.50
Female
Male
2.50
14
1.50
16
16
14
#8
Female
Male
1.50
#8
2.50
#8
Female
Male
2.50
14
#8
4.00
12
#8
Female
Male
4.00
12
#8
6.00
10
10
#8
Female
6.00
For detailed information on crimp tooling: see crimp tooling section.
139
相关型号:
UTVB28-21PY
MIL Series Connector, 37 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle, LEADFREE
AMPHENOL
UTVB28-21PZ
MIL Series Connector, 37 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle, LEADFREE
AMPHENOL
UTVB28-21SN
MIL Series Connector, 37 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle, LEADFREE
AMPHENOL
UTVB28-21SW
MIL Series Connector, 37 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle, LEADFREE
AMPHENOL
UTVB28-21SY
MIL Series Connector, 37 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle, LEADFREE
AMPHENOL
UTVB28-21SZ
MIL Series Connector, 37 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle, LEADFREE
AMPHENOL
UTVB32-13PN
MIL Series Connector, 13 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle, LEADFREE
AMPHENOL
UTVB32-13SN
MIL Series Connector, 13 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle, LEADFREE
AMPHENOL
UTVB32-13SW
MIL Series Connector, 13 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle, LEADFREE
AMPHENOL
UTVB32-13SX
MIL Series Connector, 13 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle, LEADFREE
AMPHENOL
UTVB32-13SY
MIL Series Connector, 13 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle, LEADFREE
AMPHENOL
UTVB32-13SZ
MIL Series Connector, 13 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle, LEADFREE
AMPHENOL
©2020 ICPDF网 联系我们和版权申明