AS1746 [AMSCO]
0.5/0.6ohm, Low-Voltage, Dual SPDT Analog Switch; 0.5 / 0.6ohm ,低电压,双路SPDT模拟开关型号: | AS1746 |
厂家: | AMS(艾迈斯) |
描述: | 0.5/0.6ohm, Low-Voltage, Dual SPDT Analog Switch |
文件: | 总2页 (文件大小:361K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
austriamicrosystems
Product Brief
AS1746
0.5/0.6Ω, Low-Voltage, Dual SPDT Analog Switch
1 General Description
2 Key Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Single Supply Operation: +1.8 to +5.5V
Normally Closed Switch RON: 0.45Ω (+2.7V Supply)
Normally Open Switch RON: 0.55Ω (+2.7V Supply)
RON Matching Between Channels: 0.06Ω
RON Flatness Over Signal Range: 0.15Ω
Supply Current: 50nA
The AS1746 is a low on-resistance (RON), low-voltage,
dual-single-pole/double-throw (SPDT) analog switch
designed to operate from a single +1.8 to +5.5V supply.
The device features a 0.5Ω (max) RON for normally
closed (NC) switches and a 0.6Ω (max) RON for nor-
mally open (NO) switches using a +2.7V supply.
The AS1746 features break-before-make switching
(2ns) with tON = 50ns and tOFF = 30ns (using a +2.7V
supply).
The digital logic inputs are 1.8V logic-compatible with
+2.7 to +3.3V supplies.
Rail-to-Rail Signal Handling
The AS1746 is available in a TDFN-10 (3x3mm) pack-
age, a MSOP-10 and a WL-CSP-10 package.
1.8V Logic Compatibility
Low Crosstalk: -60dB (100kHz)
High Off-Isolation: -64dB (100kHz)
Total Harmonic Distortion: 0.025%
Ultra-Low Leakage Currents: 1nA (@ TAMB = +25ºC)
Package Types:
- TDFN-10 (3x3mm)
- WL-CSP-10
- MSOP-10
3 Applications
The device is ideal for audio headsets, MP3 players,
power routing switches, relay replacements, audio and
video signal routing, communications circuits, PCMCIA
cards, mobile phones, MODEMs, and any battery-oper-
ated equipment.
Figure 1. Block Diagram – TDFN-10 (3x3mm)
AS1746
V+
NO1
1
2
3
4
5
10 NO2
Truth Table
NOx to
COM
NCx to
9
8
7
6
COM2
IN
COM
Low
Off
On
On
Off
COM1
IN1
IN2
High
NC2
GND
Switch shown for logic low input.
NC1
www.austriamicrosystems.com
Revision 1.00
1 - 2
AS1746
austriamicrosystems
Product Brief
Copyrights
Copyright © 1997-2006, austriamicrosystems AG, Schloss Premstaetten, 8141 Unterpremstaetten, Austria-Europe.
Trademarks Registered ®. All rights reserved. The material herein may not be reproduced, adapted, merged, trans-
lated, stored, or used without the prior written consent of the copyright owner.
All products and companies mentioned are trademarks or registered trademarks of their respective companies.
Disclaimer
Devices sold by austriamicrosystems AG are covered by the warranty and patent indemnification provisions appearing
in its Term of Sale. austriamicrosystems AG makes no warranty, express, statutory, implied, or by description regarding
the information set forth herein or regarding the freedom of the described devices from patent infringement. austriami-
crosystems AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior
to designing this product into a system, it is necessary to check with austriamicrosystems AG for current information.
This product is intended for use in normal commercial applications. Applications requiring extended temperature
range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-
sustaining equipment are specifically not recommended without additional processing by austriamicrosystems AG for
each application. For shipments of less than 100 parts the manufacturing flow might show deviations from the standard
production flow, such as test flow or test location.
The information furnished here by austriamicrosystems AG is believed to be correct and accurate. However,
austriamicrosystems AG shall not be liable to recipient or any third party for any damages, including but not limited to
personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or
consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the tech-
nical data herein. No obligation or liability to recipient or any third party shall arise or flow out of
austriamicrosystems AG rendering of technical or other services.
Contact Information
Headquarters
austriamicrosystems AG
A-8141 Schloss Premstaetten, Austria
Tel: +43 (0) 3136 500 0
Fax: +43 (0) 3136 525 01
For Sales Offices, Distributors and Representatives, please visit:
http://www.austriamicrosystems.com
austriamicrosystems – a leap ahead
www.austriamicrosystems.com
Revision 1.00
2 - 2
相关型号:
©2020 ICPDF网 联系我们和版权申明