AWT6243RM27Q7 [ANADIGICS]
HELP3TM 1.7 GHz/UMTS 3.4 V/28.5 dBm Linear Power Amplifier Module; HELP3TM 1.7主频/ UMTS 3.4 V / 28.5 dBm的线性功率放大器模块型号: | AWT6243RM27Q7 |
厂家: | ANADIGICS, INC |
描述: | HELP3TM 1.7 GHz/UMTS 3.4 V/28.5 dBm Linear Power Amplifier Module |
文件: | 总8页 (文件大小:409K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AWT6243R
HELP3TM 1.7 GHz/UMTS 3.4 V/28.5 dBm
Linear Power Amplifier Module
Data Sheet - Rev 2.3
FEATURES
•
InGaP HBT Technology
•
High Efficiency:
41 % @ POUT = +28.5 dBm
A
W
T6243R
22 % @ POUT = +16 dBm (without DC/DC-
Converter)
•
Low Quiescent Current: 9 mA (in low power
mode)
•
•
Low Leakage Current in Shutdown Mode: <1 µA
Internal Voltage Regulator Eliminates the need
for External Reference Voltage (VREF)
•
•
•
HSPA Compliant
M27 Package
10 Pin 3 mm x 3 mm x 1 mm
Surface Mount Module
Optimized for a 50 Ω System
Low Profile Miniature Surface Mount Package:
1 mm
•
RoHS Compliant Package, 250 oC MSL-3
APPLICATIONS
The AWT6243 is manufactured on an advanced
InGaP HBT MMIC technology offering state-of-the-art
reliability, temperature stability, and ruggedness. There
are two operating modes for optimum efficiency at
high and medium/low power output levels.Ashutdown
mode with low leakage current increases handset talk
and standby-time. The self-contained 3 mm x 3 mm x
1 mm surface mount package incorporates matching
networks optimized for output power, efficiency, and
linearity in a 50 Ω system.
•
WCDMA/HSPA AWS/KPCS band Wireless
Handsets and Data Devices
PRODUCT DESCRIPTION
The AWT6243 HELP3TM PA is a next generation
WCDMA product for UMTS handsets. This PA
incorporates ANADIGICS’ HELP3TM technology to
provide low power consumption without the need for
an external voltage regulator or DC/DC Converter.
GND at slug (pad)
1
2
10
9
VBATT
RFIN
VCC
RFOUT
GND
GND
GND
8
VMODE2 (N/C)
VMODE1
3
4
5
Bias Control
Voltage Regulation
7
VENABLE
6
Figure 1: Block Diagram
04/2009
AWT6243R
Figure 2: Pinout (X-ray Top View)
Table 1: Pin Description
PIN
1
NAME
DESCRIPTION
Battery Voltage
RF Input
V
BATT
2
RFIN
3
VMODE2 (N/C) No Connection
4
V
MODE1
Mode Control Voltage 1
PA Enable Voltage
Ground
5
V
ENABLE
6
GND
GND
GND
RFOUT
7
Ground
8
Ground
9
RF Output
10
V
CC
Supply Voltage
Data Sheet - Rev 2.3
04/2009
2
AWT6243R
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN
0
MAX
+5
UNIT
V
Supply Voltage (VCC
)
Battery Voltage (VBATT
Control Voltages (VMODE1, VENABLE
RF Input Power (PIN
Storage Temperature (TSTG
)
0
+6
V
)
0
+3.5
+10
+150
V
)
-
dBm
°C
)
-40
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure
to absolute ratings for extended periods of time may adversely affect
reliability.
Table 3: Operating Ranges
PARAMETER
MIN
1710
+3.2
TYP
-
MAX
1785
+4.2
UNIT
MHz
V
COMMENTS
Operating Frequency (f)
Supply Voltage (VCC
)
+3.4
P
OUT< +28.5 dBm
+2.15
0
+2.4
-
+3.1
+0.5
PA "on"
PA "shut down"
Enable Voltage (VENABLE
Mode Control Voltage
)
V
V
+2.15
0
+2.4
-
+3.1
+0.5
Low Bias Mode
High Bias Mode
(VMODE1
)
RF Output Power (POUT
)
Rel99 WCDMA, HPM
HSPA (MPR = 0), HPM
Rel99 WCDMA, LPM
HSPA (MPR = 0), LPM
28.0(1)
27.0(1)
15.5(1)
14.5(1)
28.5
27.5
16
28.5
27.5
16
3GPP TS 34.121-1, Rel 7 Table
C.11.1.3
dBm
15
15
C
Case Temperature (T
Note:
(1) For operations at VCC = +3.2V, POUT is derated by 0.5 dB.
C
)
-20
-
+90
The device may be operated safely over these conditions; however, parametric performance is guaranteed only
over the conditions defined in the electrical specifications.
Data Sheet - Rev 2.3
04/2009
3
AWT6243R
Table 4: Electrical Specifications
(T
C
= +25 °C, VCC = +3.4 V, VBATT = +3.4 V, VENABLE = +2.4 V, 50 Ω system)
COMMENTS
PARAMETER
MIN
TYP
MAX
UNIT
P
OUT
V
MODE1
25.0
12.0
27.5
14.0
30.5
17.0
+28.5 dBm
+16 dBm
0 V
+2.4 V
Gain
dB
dBc
dBc
%
-
-
-41
-43
-37.5
-37.5
+28.5 dBm
+16 dBm
0 V
+2.4 V
ACLR1 at 5 MHz offset (1)
ACLR2 at 10 MHz offset
-
-
-56
-53
-48
-48
+28.5 dBm
+16 dBm
0 V
+2.4 V
Power-Added Efficiency (1)
(without DC/DC Converter)
37
18
41
22
-
-
+28.5 dBm
+16 dBm
0 V
+2.4 V
Quiescent Current (Icq)
Low Bias Mode
-
-
-
-
9.5
0.3
14.5
0.8
0.8
5
mA
mA
mA
mA
VMODE1 = +2.4 V
Mode Control Current
Enable Current
through VMODE pin, VMODE1 = +2.4 V
through VENABLE pin
0.35
3.0
BATT Current
through VBATT pin, VMODE1 = +2.4 V
V
V
BATT = +4.2 V, VCC = +4.2 V,
ENABLE = 0 V, VMODE1 = 0 V
Leakage Current
-
<1
5
µA
-
-
-
-136
-145
-137
-134
1845 - 1880 MHz
Noise in Receive Band
-141 dBm/Hz 2110 - 2155 MHz
-135
1574.4 - 1576.4 MHz
Harmonics
2fo
3fo, 4fo
-
-
-41
-55
-30
-35
POUT < +28.5 dBm
dBc
VSWR
dBc
Input Impedance
-
-
2:1
-
Spurious Output Level
(all spurious outputs)
-
-70
See note 2.
Load mismatch stress with no
permanent degradation or failure
8:1
-
-
VSWR Applies over full operating range
Notes:
(1) ACLR and Efficiency measured at 1747.5 MHz.
2. POUT < +28.5 dBm; In-band load VSWR < 5:1; Out-of-band load VSWR < 10:1; Applies over all operating conditions.
Data Sheet - Rev 2.3
04/2009
4
AWT6243R
APPLICATION INFORMATION
To ensure proper performance, refer to all related logic level (see Operating Ranges table) to VMODE1
.
Application Notes on the ANADIGICS web site: The Bias Control table lists the recommended modes
http://www.anadigics.com
of operation for various applications. VMODE2 is not
necessary for this PA.
Shutdown Mode
The power amplifier may be placed in a shutdown Two operating modes are available to optimize
mode by applying logic low levels (see Operating current consumption. High Bias/High Power operating
Ranges table) to the VENABLE and VMODE1 voltages.
mode is for POUT levels > 16 dBm. At around 16 dBm
output power, the PA should be “Mode Switched” to
Medium/Low power mode for lowest quiescent current
consumption.
Bias Modes
The power amplifier may be placed in either a Low Bias
mode or a High Bias mode by applying the appropriate
Table 5: Bias Control
P
OUT
APPLICATION
BIAS MODE
Low
V
ENABLE
V
MODE1
V
CC
V
BATT
LEVELS
UMTS - med/low power
(Low Bias Mode)
< +16 dBm
+2.4 V
+2.4 V
+2.4 V
0 V
3.2 - 4.2 V
3.2 - 4.2 V
> 3.2 V
> 3.2 V
UMTS - high power
(High Bias Mode)
> +16 dBm
High
Optional lower VCC in low
power mode
< +6 dBm
Low
+2.4 V
0 V
+2.4 V
0 V
1.5 V
> 3.2 V
> 3.2 V
Shutdown
-
Shutdown
3.2 - 4.2 V
V
BATT
VCC
C1
1000 pF
C3
1000 pF
C4
2.2µF ceramic
C5
2.2 µF
1
2
10
9
V
BATT
V
CC
RFOUT
RF OUT
RF IN
RFIN
C6
68 pF
8
3
4
GND
GND
V
V
V
MODE2 (N/C)
7
6
V
MODE1
MODE1
5
V
ENABLE
ENABLE
GND
GND
at slug
C2
0.01µF
Figure 3: Evaluation Board Circuit Schematic
Data Sheet - Rev 2.3
04/2009
5
AWT6243R
PACKAGE OUTLINE
Figure 4: M27 Package Outline - 10 Pin 3 mm x 3 mm x 1 mm Surface Mount Module
6243R
=
TWO DIGIT WAFER NUMBER
6243R
106
106
Figure 5: Branding Specification - M27 Package
Data Sheet - Rev 2.3
04/2009
6
AWT6243R
COMPONENT PACKAGING
Pin 1
Figure 6: Tape & Reel Packaging
Table 6: Tape & Reel Dimensions
PACKAGE TYPE
TAPE WIDTH
12 mm
POCKET PITCH REEL CAPACITY MAX REEL DIA
3 mm x 3 mm x 1 mm
4 mm
2500
7"
Data Sheet - Rev 2.3
04/2009
7
AWT6243R
ORDERING INFORMATION
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDER NUMBER
COMPONENT PACKAGING
RoHS Compliant 10 Pin
3 mm x 3 mm x 1 mm Tape and Reel, 2500 pieces per Reel
Surface Mount Module
AWT6243RM27Q7 -20 oC to +90 oC
AWT6243RM27P9 -20 oC to +90 oC
RoHS Compliant 10 Pin
3 mm x 3 mm x 1 mm Partial Tape and Reel
Surface Mount Module
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
E-mail: Mktg@anadigics.com
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice.
The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to
change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed
to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers
to verify that the information they are using is current before placing orders.
WARNING
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of anANADIGICS product
in any such application without written consent is prohibited.
Data Sheet - Rev 2.3
04/2009
8
相关型号:
©2020 ICPDF网 联系我们和版权申明