C1517J5003AHF [ANAREN]
90 Degree Hybrid Coupler;
| 型号： | C1517J5003AHF |
| 厂家： | 
ANAREN MICROWAVE |
| 描述： | 90 Degree Hybrid Coupler 射频 微波 |
| 文件： | 总6页 (文件大小：217K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Model C1517J5003AHF
Rev D
Ultra Low Profile 0805
3 dB, 90° Hybrid Coupler
Description
The C1517J5003AHF is a low cost, low profile subꢀminiature high
performance 3 dB coupler in an easy to use surface mount package. The
C1517J5003AHF is ideal for balanced power and low noise amplifiers, plus signal
distribution and other applications where low insertion loss and tight amplitude and
phase balance are required. The C1517J5003AHF is available on tape and reel for
pick and place high volume manufacturing.
All of the Xinger components are constructed from ceramic filled PTFE
composites which possess excellent electrical and mechanical stability. All parts
have been subjected to rigorous qualification testing and units are 100% RF tested.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
Min.
Typ.
Max
Unit
MHz
ꢁ
• 1500 – 1700 MHz
• 0.7mm Height Profile
• High Isolation & Low Loss
• LTE Bands: 24
Frequency
1500
1700
Port Impedance
Return Loss
50
25
21
24
dB
• Surface Mountable
Isolation
28
dB
• Tape & Reel
Insertion Loss*
Amplitude Balance
Phase Balance (relative to 90°)
Power Handling
Operating Temperature
0.2
0.4
0.7
0.3
1.0
4
dB
• Non-conductive Surface
• RoHS Compliant
• Halogen-Free
dB
Degrees
Watts
ºC
4
• 100% RF Tested
•
-55°C to 85°C
ꢀ55
+85
Group Delay
Min.
Typ.
Max
0.123
(1.5-1.7GHZ)
0.093
0.108
(nSec)
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Bottom View (Farside)
Top View (Nearside)
2.04±0.10
Side View
4x 0.37
2x 0.15
0.70±0.07
1
2
3
1.29±0.10
6x 0.98
6x 0.22
Orientation Marker
Denotes Pin Location
Orientation Marker
Denotes Pin Location
6
5
4
4x 0.65
6x 0.30
Pin Configurationꢀ1 Configurationꢀ2 Configurationꢀ3 Configurationꢀ4
1
2
3
4
5
6
Input
Isolated
Direct
Coupled
GND
GND
GND
GND
Mechanical Outline
ꢀDimensions are in Millimeters
Isolated
Direct
GND
Input
Coupled
Input
Direct
Isolated
GND
Coupled
GND
GND
ꢀTolerances are NonꢀCumulative
Coupled
Direct
Isolated
Input
USA/Canada: (315) 432ꢀ8909
Toll Free: (800) 411ꢀ6596
Europe: +44 2392ꢀ232392
Asia: +86 512ꢀ62749282
Visit us at
www.anaren.com
Model C1517J5003AHF
Rev D
Typical Broadband Performance: 500 MHz. to 6000 MHz.
Return Loss at Input Port (dB)
Insertion Loss (dB)
0
0
ꢀ0.5
ꢀ1
ꢀ5
ꢀ10
ꢀ15
ꢀ20
ꢀ25
ꢀ30
ꢀ35
ꢀ1.5
ꢀ2
ꢀ2.5
ꢀ3
ꢀ3.5
0.5
1
1
1
1.5
1.5
1.5
2
2
2
2.5
3
3.5
4
4.5
4.5
4.5
5
5
5
5.5
5.5
5.5
6
6
6
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
Freq [GHz]
Freq [GHz]
Amplitude Balance (dB)
Phase balance(degree)
2
1.5
1
20
15
10
5
0.5
0
0
ꢀ0.5
ꢀ1
ꢀ5
ꢀ10
ꢀ15
ꢀ20
ꢀ1.5
ꢀ2
0.5
2.5
3
3.5
4
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
Freq [GHz]
Freq [GHz]
Isolation (dB)
0
ꢀ5
ꢀ10
ꢀ15
ꢀ20
ꢀ25
ꢀ30
ꢀ35
0.5
2.5
3
3.5
4
Freq [GHz]
USA/Canada: (315) 432ꢀ8909
Toll Free: (800) 411ꢀ6596
Europe: +44 2392ꢀ232392
Visit us at
www.anaren.com
Asia: +86 512ꢀ62749282
Model C1517J5003AHF
Rev D
Typical Performance: 1400 MHz. to 1800 MHz.
Insertion Loss (dB)
Return Loss at Input Port (dB)
0
0
ꢀ0.5
ꢀ1
ꢀ5
ꢀ10
ꢀ15
ꢀ20
ꢀ25
ꢀ30
ꢀ35
ꢀ1.5
ꢀ2
ꢀ2.5
ꢀ3
ꢀ3.5
1.4
1.45
1.5
1.55
1.6
1.65
1.7
1.75
1.8
1.4
1.45
1.5
1.55
1.6
1.65
1.7
1.75
1.8
Freq [GHz]
Freq [GHz]
Phase balance(degree)
Amplitude Balance (dB)
10
8
2
1.5
1
6
4
0.5
0
2
0
ꢀ2
ꢀ4
ꢀ6
ꢀ8
ꢀ10
ꢀ0.5
ꢀ1
ꢀ1.5
ꢀ2
1.4
1.45
1.5
1.55
1.6
Freq [GHz]
1.65
1.7
1.75
1.8
1.4
1.45
1.5
1.55
1.6
Freq [GHz]
1.65
1.7
1.75
1.8
Isolation (dB)
0
ꢀ5
ꢀ10
ꢀ15
ꢀ20
ꢀ25
ꢀ30
ꢀ35
1.4
1.45
1.5
1.55
1.6
1.65
1.7
1.75
1.8
Freq [GHz]
USA/Canada: (315) 432ꢀ8909
Toll Free: (800) 411ꢀ6596
Europe: +44 2392ꢀ232392
Asia: +86 512ꢀ62749282
Visit us at
www.anaren.com
Model C1517J5003AHF
Rev D
Definition of Measured Specifications
Mathematical Representation
i, j, k, m is denoted as the port index of input, isolated, direct
and coupled port for specific pin configuration shown in the table
Parameter
Definition
The impedance match of the
coupler to a 50ꢀ system. Return
Loss is an alternate means to
express VSWR.
20log10 ( Sii )
Return Loss
The input power divided by the
sum of the power at the two
output ports.
The input power divided by the
sum of the power at the two
output ports.
20log10 Sji
Isolation
10log10 ( Smi 2 + Ski
)
2
Insertion Loss
Ski
Amplitude
Balance
The difference in power between
the two outputs.
20log10 (
)
Smi
The difference in phase angle
between the two output ports.
Phase Balance
∠Ski − ∠Smi + 90o
Group delay (ns) =
Group delay is defined as the
average of the mean group delay
of the coupling path and the
mean group delay of the direct
path.
Mean GD S
+ Mean GD S
mi
ki
Group Delay
2
where "Mean"is the arithmetic mean of the group
delay over a frequency band.
*100% RF test is performed per spec definition for pin configuration 1 and port 1 (input port) is connected to pin1, port 2 (isolated port) is connected to
pin 3, port 3 (direct port) is connected to pin 4 and port 4 (isolated) is connected to pin 6.
USA/Canada: (315) 432ꢀ8909
Visit us at
www.anaren.com
Toll Free: (800) 411ꢀ6596
Europe: +44 2392ꢀ232392
Asia: +86 512ꢀ62749282
Model C1517J5003AHF
Rev D
Mounting Configuration:
In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be
used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet
published specifications.
All of the Xinger components are constructed from organic PTFE based composites which possess excellent
electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and
ready for Pbꢀfree soldering processes. Pads are Gold plated with a Nickel barrier.
An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the
transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying
pick and place equipment tolerances.
6x 0.35
4x 0.30
6x 0.33
0.66
6x 0.05
Plated thru
holes to
ground
4x Transmission
Line
Circuit Pattern
Footprint Pad (s)
Solder Resist
Dimensions are in Millimeters
Mounting Footprint
USA/Canada: (315) 432ꢀ8909
Toll Free: (800) 411ꢀ6596
Europe: +44 2392ꢀ232392
Asia: +86 512ꢀ62749282
Visit us at
www.anaren.com
Model C1517J5003AHF
Rev D
Packaging and Ordering Information
Parts are available in reel and are packaged per EIA 481ꢀ2. Parts are oriented in tape and reel as shown below.
Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information
.
2.00
.81
4.00
1.75
3.50
8.00
2.41
.25
4.00
1.60
USA/Canada: (315) 432ꢀ8909
Toll Free: (800) 411ꢀ6596
Europe: +44 2392ꢀ232392
Asia: +86 512ꢀ62749282
Visit us at
www.anaren.com
相关型号：
©2020 ICPDF网 联系我们和版权申明