RFP-100N3AF [ANAREN]
Fixed Attenuator, 0MHz Min, 2500MHz Max, ROHS COMPLIANT PACKAGE-2;
| 型号： | RFP-100N3AF |
| 厂家： | 
ANAREN MICROWAVE |
| 描述： | Fixed Attenuator, 0MHz Min, 2500MHz Max, ROHS COMPLIANT PACKAGE-2 衰减器 射频 微波 |
| 文件： | 总2页 (文件大小：93K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Model 100NXXAF
Flangeless Attenuator
100 Watts
General Specifications
Resistive Element
Substrate
Thick film
Aluminum Nitride ceramic
99.99% pure silver (.005” thick)
Lead(s):
Electrical Specifications
Attenuation Range:
Frequency Range;
Power:
1, 2, 3, 4, 5, 6, 10, 20 or 30 dB
DC – See Chart
100 Watts
Features:
DC – 3.0 GHz
VSWR
1.25:1
Note: Tolerance is 0.010”, unless otherwise specified. Designed to meet of
exceed applicable portions of MIL-E-5400. Operating temperature is -55ºC to
150ºC (see chart for derating temperatures).
100 Watts
AlN Ceramic
All dimensions in inches.
Specifications subject to change with out notice.
Non-Nichrome Resistive
Element
Low VSWR
100% Tested
RoHS Compliant
Outline Drawing
100NXXAF (097) Rev E
USA/Canada:
Toll Free:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape
and Reel For Pick and
Place Manufacturing.
Europe:
Model 100NXXAF
Typical Performance:
Power De-rating:
Mounting Footprint and Procedure:
.025 MIN.
(2 PLACES)
BOARD LOWER
THAN LEAD.
BOARD EVEN
WITH LEAD.
BOARD LOWER
THAN LEAD.
BOARD HIGHER
THAN LEAD.
SUGGESTED STRESS RELIEF METHODS
SCALE: NONE
NOT RECOMMENDED APPLICATION
SCALE: NONE
SUGGESTED MOUNTING PROCEDURES:
MAKE SURE THAT THE DEVICES ARE MOUNTED ON
FLAT SURFACES (.001" UNDER THE DEVICE) TO
OPTIMIZE THE HEAT TRANSFER.
1.
2. DRILL & TAP THE HEATSINK FOR THE APPROPRIATE
THREAD SIZE TO BE USED.
3. COAT HEATSINK WITH A MINIMUM AMOUNT OF HIGH
QUALITY SILICONE GREASE (.001" MAX. THICKNESS).
4. POSITION DEVICE ON MOUNTING SURFACE & SECURE
USING SOCKET HEAD SCREWS, FLAT & SPLIT WASHER.
TORQUE SCREWS TO THE APPROPRIATE VALUE. MAKE
SURE THAT THE DEVICE IS FLAT AGAINST THE HEATSINK.
(CARE SHOULD BE TAKEN TO AVOID UPWARD PRESSURE OF
THE LEADS TOWARDS THE LID).
5.
SOLDER LEADS IN PLACE USING APPROPROATE SOLDER WITH
A CONTROLLED TEMPERATURE IRON.
** FOR MORE DETAILS CONTACT FACTORY **
100NXXAF (097) Rev E
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.
相关型号：
©2020 ICPDF网 联系我们和版权申明