RFP-250250-4X50-2 [ANAREN]

Chip Terminations 40 Watts, 50ohm; 片上终端40瓦, 50欧姆
RFP-250250-4X50-2
型号: RFP-250250-4X50-2
厂家: ANAREN MICROWAVE    ANAREN MICROWAVE
描述:

Chip Terminations 40 Watts, 50ohm
片上终端40瓦, 50欧姆

文件: 总2页 (文件大小:505K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Model RFP-250250-4X50-2  
Chip Terminations  
40 Watts, 50  
General Specifications  
Resistive Element:  
Thick film  
Substrate:  
Terminals:  
Beryllium oxide ceramic  
Thick film silver  
Electrical Specifications  
Resistance Value:  
Frequency Range:  
Power:  
50 ohms, 2%  
Features  
• DC - 2.0 GHz  
DC - 2.0 GHz  
40 Watts  
1.30:1  
V.S.W.R.:  
• 40 Watts  
Notes: Tolerance is .010, unless otherwise specified. Operating  
temperature is -55°C to +150°C (see chart). Designed to meet or  
exceed applicable portions of MIL-E-5400. All dimensions are in  
inches.  
• BeO Ceramic  
• Non-Nichrome Resistive  
Element  
Specifications subject to change without notice.  
• Low VSWR  
• 100% Tested  
Outline Drawing  
SIDE VIEW  
TOP VIEW  
.250  
.040  
.230  
.065  
.055  
RFP  
X
XX  
.250  
HATCHED AREA INDICATES  
LOCATION OF PROTECTIVE COATING  
Note: XX denotes value  
VER. 12/5/01  
Available on Tape and Reel for Pick and Place Manufacturing.  
Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121  
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369  
1
Model RFP-250250-4X50-2  
Typical Performance  
Suggested Mounting Procedures  
Power Derating  
.025 MIN.  
(2 PLACES)  
100  
75  
50  
BOARD LOWER  
THAN LEAD.  
BOARD HIGHER  
THAN LEAD.  
BOARD LOWER  
THAN LEAD.  
BOARD EVEN  
WITH LEAD.  
NOT RECOMMENDED APPLICATION  
SCALE:  
SUGGESTED STRESS RELIEF METHODS  
SCALE:  
25  
0
1. Make sure that the devices are mounted on flat surfaces  
(.001” under the device) to optimize the heat transfer.  
25  
50  
75  
100  
125  
150  
2. Position device on mounting surface and solder in place  
using an indalloy type or a 60/40 type solder.  
P.C.B. SOLDER INTERFACE TEMPERATURE — °C  
3. Solder leads in place using a 60/40 type solder with a  
controlled temperature iron (700°F).  
Available on Tape and Reel for Pick and Place Manufacturing.  
Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121  
2
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369  

相关型号:

RFP-250250-4Y100-2

Surface Mount Resistors
ANAREN

RFP-250250-4Z50-2

Surface Mount Terminations 16 Watts, 50ohm
ANAREN

RFP-250250-6Z50-2

Surface Mount Terminations 16 Watts, 50ohm
ANAREN

RFP-250250A4X50

Alumina Terminations 30 Watts, 50ohm
ANAREN

RFP-250250N4AA1

Surface Mount Attenuator 10 Watts
ANAREN

RFP-250250N4AA10

Surface Mount Attenuator 10 Watts
ANAREN

RFP-250250N4AA2

Surface Mount Attenuator 10 Watts
ANAREN

RFP-250250N4AA3

Surface Mount Attenuator 10 Watts
ANAREN

RFP-250250N4AA4

Surface Mount Attenuator 10 Watts
ANAREN

RFP-250250N4AA5

Surface Mount Attenuator 10 Watts
ANAREN

RFP-250250N4AA6

Surface Mount Attenuator 10 Watts
ANAREN

RFP-250250N4AA9

Surface Mount Attenuator 10 Watts
ANAREN