MP38 [APEX]
POWER OPERATIONAL AMPLIFIER; 功率运算放大器型号: | MP38 |
厂家: | CIRRUS LOGIC |
描述: | POWER OPERATIONAL AMPLIFIER |
文件: | 总4页 (文件大小:265K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
�ꢀꢁꢂꢃꢄꢀ�ꢂꢃꢅꢆꢇꢀꢈꢅꢉꢄꢅꢊ�ꢉꢇꢋꢇꢂꢃ
�ꢀꢁꢂꢃꢄꢃ�ꢀꢁꢂꢅꢃ
�
ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢁ
ꢆ
ꢇ
ꢃ
ꢈ
ꢃ
ꢉ
ꢊ
�ꢀꢀꢁꢂꢃꢃꢄꢄꢄꢅꢆꢁꢇꢈꢉꢊꢋꢌꢍꢀꢇꢋ�ꢅꢋꢍꢉꢎꢎꢎꢏꢐꢑꢑꢒꢎꢓꢔꢕꢖꢆꢁꢇꢈꢎꢎꢎꢏꢐꢑꢑꢒꢎꢓꢔꢕꢖꢗꢘꢙꢚ
FEATURES
• HIGH INTERNAL DISSIPATION — 125 Watts
• HIGH VOLTAGE, HIGH CURRENT — 200V, 10A
• HIGH SLEW RATE — 10V/µs
• 4 WIRE CURRENT LIMIT SENSING
• OPTIONAL BOOST VOLTAGE INPUTS
APPLICATIONS
• LINEAR AND ROTARY MOTOR DRIVES
• YOKE/MAGNETIC FIELD EXCITATION
• PROGRAMMABLE POWER SUPPLIES TO ±95V
• INDUSTRIAL AUDIO
30-PIN DIP
• PACKAGE OPTION - DIP10 - DUAL-IN-LINE
PACKAGE STYLE CL
DESCRIPTION
TYPICAL APPLICATION REF: APPLICATION NOTE 25
The MP38 is a cost-effective high voltage MOSFET power
operational amplifier constructed with surface mount com-
ponents on a thermally conductive but electrically isolated
substrate.
The high power bandwidth and high voltage output of the
MP38 allows driving ultra-sonic transducers via a resonant
circuit including the transducer and a matching transformer.
The load circuit appears resistive to the MP38.
While the cost is low the MP38 offers many of the same
features and performance specifications found in much more
expensive hybrid power amplifiers.
�
ꢀ
The metal substrate allows the MP38 to dissipate power
up to 125 watts and its power supply voltages can range up
to +/- 100 Volts (200V total). Optional boost voltage inputs
allow the small signal portion of the amplifier to operate at
higher supply voltages than the high current output stage.
The amplifier is then biased to achieve close linear swings
to the supply rails at high current for extra efficient operation.
External compensation tailors performance to the user needs.
A four-wire sense technique allows current limiting without
the need to consider internal or external mili-ohm parasitic
resistance in the output line. An Iq pin is available which can
be used to shut off the quiescent current in the output stage.
The output stage then operates class C and lowers quiescent
power dissipation. This is useful in applications where output
crossover distortion is not important.
ꢁꢂꢃꢄ
ꢒ
ꢒꢕꢊꢒꢙ
ꢁꢄꢋ
ꢁꢄꢓ
�
ꢆꢇꢈ�ꢉꢊ
ꢋꢌꢍꢅꢎ
ꢏ�ꢅꢄꢐ
ꢅ
ꢘꢃ
ꢕꢝ
ꢕꢘ
ꢊꢅꢇꢅꢑ
ꢕꢙ
ꢁꢅꢇꢅꢑ
ꢊꢅꢍ
ꢌꢆꢈ
ꢑꢗꢘꢜ
ꢒꢂꢊꢒꢚ
ꢎꢎꢕ
�
ꢎꢇ
ꢁꢅꢍ
ꢎꢎꢒ
ꢙ
ꢅꢔ
ꢛ
ꢕꢂ
ꢎꢎ
ꢍꢎ
ꢊꢄꢋ
�
ꢎ
ꢊꢄꢓ
ꢕꢛ
ꢒꢜꢊꢕꢃ
ꢊꢂꢃꢄ
ꢈꢆꢍꢐꢏ
ꢈ�ꢉꢍꢋꢀꢌ�ꢑꢐ�
ꢆꢇꢈ�ꢉꢊꢋꢌꢍꢅꢎꢖꢉꢑꢗꢇꢅꢀꢅꢐ�
EXTERNAL CONNECTIONS
ꢢ
ꢢ
ꢂꢙ
ꢚꢙ
EQUIVALENT SCHEMATIC
�
�ꢂ ꢍꢎꢘ
�ꢁ ꢍꢎꢘ
ꢍꢎꢏ
ꢔꢂ
ꢕ
ꢇ
ꢖ
ꢆꢏ ꢆꢆ ꢆꢊ ꢆꢕ ꢆꢋ
ꢆ
ꢊ
ꢋ
ꢑ
ꢔ
ꢗ
ꢔ�
ꢉ�
ꢂ
ꢉꢂ
ꢔꢁ
�ꢀ
ꢍꢎꢘ
ꢕ�ꢖ
ꢕ�ꢗ
ꢊꢋꢌ
ꢂꢃꢜꢝꢃꢁꢞꢁꢅꢟꢠꢀꢓꢞꢟꢈꢀꢞꢡ
ꢕꢅ
ꢕꢁ
ꢌ�
ꢔꢀ
ꢕꢀ
ꢕꢏ ꢊꢗ ꢊꢔ ꢊꢖ ꢊꢑ ꢊꢇ ꢊꢋ ꢊꢕ ꢊꢊ ꢊꢆ ꢊꢏ ꢆꢗ ꢆꢔ ꢆꢖ ꢆꢑ ꢆꢇ
ꢉꢐꢂ
ꢉꢐ�
ꢀ
ꢄ
ꢕꢇ
ꢂꢀ ꢍꢒꢙꢚꢛ
ꢕꢃ
ꢑꢒꢙꢚꢛ
ꢂꢁ
ꢕꢄ
ꢔꢈ
ꢔꢇ
�ꢅ
�ꢄ
�ꢃ
ꢜꢝꢞ
ꢜꢝꢞ
ꢜꢝꢞ
ꢕꢈ
ꢔꢅ
ꢕ�ꢆꢗ
ꢁꢆ
ꢂꢇ
ꢢ
ꢢ
ꢑꢒꢋ
ꢕ�ꢆꢖ
ꢔ�ꢆ
ꢔꢄ
ꢔꢃ
* SEE "BYPASSING" PARAGRAPH
Phase Compensation
ꢍꢒꢋ
ꢕ��
ꢒꢓ ꢂꢅ
ꢔ��
Gain
1
≥ 3
≥ 10
Cc
Rc
ꢕ�ꢂ
ꢂꢈ
ꢊꢋꢌ
ꢑꢎꢘ
ꢑꢎꢘ
ꢑꢎꢘ
ꢕ�ꢁ
ꢔ�ꢂ
�ꢈ
�ꢇ
ꢂꢆ
ꢕ�ꢀ
470pF
220pF
100pF
100Ω
Short
Short
ꢉꢁ
ꢔ�ꢁ
ꢑꢎꢏ ꢂꢄ
APEX MICROTECHNOLOGY CORPORATION • TELEPHONE (520) 690-8600 • FAX (520) 888-3329 • ORDERS (520) 690-8601 • EMAIL prodlit@apexmicrotech.com
1
ABSOLUTE MAXIMUM RATINGS
SPECIFICATIONS
MP38 • MP38A
SUPPLY VOLTAGE, +VS to –VS
BOOST VOLTAGE
200V
±VS ±20V
25A
125W
±20V
±VB
200°C
175°C
ABSOLUTE MAXIMUM RATINGS
OUTPUT CURRENT, within SOA
POWER DISSIPATION, internal
INPUT VOLTAGE, differential
INPUT VOLTAGE, common mode
TEMPERATURE, pin solder - 10s
TEMPERATURE, junction2
TEMPERATURE, storage
OPERATING TEMPERATURE RANGE, case
–40 to +105°C
–40 to +85°C
SPECIFICATIONS
MP38
TYP
MP38A
TYP
PARAMETER
TEST CONDITIONS1
MIN
MAX MIN
MAX
UNITS
INPUT
OFFSET VOLTAGE, initial
OFFSET VOLTAGE, vs. temperature
OFFSET VOLTAGE, vs. supply
OFFSET VOLTAGE, vs. power
BIAS CURRENT, initial
5
30
15
30
10
.01
10
1010
20
10
50
3
*
mV
µV/°C
µV/V
µV/W
pA
pA/V
pA
Ω
pF
V
dB
Full temperature range
Full temperature range
*
*
*
*
*
*
*
*
*
*
*
200
50
100
30
BIAS CURRENT, vs. supply
OFFSET CURRENT, initial
INPUT IMPEDANCE, DC
INPUT CAPACITANCE
COMMON MODE VOLTAGE RANGE Full temperature range
COMMON MODE REJECTION, DC
INPUT NOISE
±
±
±VB 15 ±VB 12
*
*
Full temp, range, V = ±20V
86
98
10
100kHz BW, RS = 1CKMΩ
µVrms
GAIN
OPEN LOOP, @15Hz
GAIN BANDWIDTH PRODUCT
POWER BANDWIDTH
Full temperature range, CC = 100pF
IO=10A
94
113
2
20
*
*
*
*
db
MHz
kHz
R =20Ω, VO =180V p-p
CCL = 100pF
PHASE MARGIN
Full temperature range
60
±
*
°
OUTPUT
±
±
VOLTAGE SWING
IO=10A
±V 8.8 ±VS 6.6
*
*
*
*
*
V
V
µs
V/µs
nF
Ω
±VSS 6.8 ±VS
4
±
VOLTAGE SWING
SETTLING TIME to .1%
SLEW RATE
±VB = ±VS ±10V, IO=10A
A =+1,10V step, R =4Ω
AVV= –10, CC= 100pLF
Full temperature range, AV=+1
2.5
10
10
*
*
CAPACITIVE LOAD
RESISTANCE
CURRENT, CONTINUOUS
4
*
*
10
11
A
POWER SUPPLY
VOLTAGE
Full temperature range
±15
-40
±75
12
±100
22
26
*
*
*
*
*
V
mA
mA
CURRENT, quiescent, boost supply
CURRENT, quiescent, total
THERMAL
RESI
S
TANCE, AC, junction to case3
Full temperature range, F>60Hz
Full temperature range, F<60Hz
Full temperature range
.9
1.2
*
*
°C/W
°C/W
°C/W
°C
RESISTANCE, DC, junction to case
RESISTANCE4, junction to air
TEMPERATURE RANGE, case
*
Meets full range specification
85
*
NOTES:
*
1.
The specification of MP38A is identical to the specification for MP38 in applicable column to the left.
Unless otherwise noted: TC = 25°C, RC = 100Ω, CC = 470pF. DC input specifications are ± value given. Power supply voltage is
typical rating. ±VB = ±V .
2.
Long term operation atSthe maximum junction temperature will result in reduced product life. Derate internal power dissipation
to achieve high MTTF. For guidance, refer to the heatsink data sheet.
3.
4.
Rating applies if the output current alternates between both output transistors at a rate faster than 60 Hz.
The MP38 must be used with a heat sink or the quiescent power may drive the unit to junction temperatures higher than 175°C.
The MP38 is constructed from MOSFET transistors. ESD handling procedures must be observed.
CAUTION
2APEX MICROTECHNOLOGY CORPORATION • 5980 NORTH SHANNON ROAD • TUCSON, ARIZONA 85741 • USA • APPLICATIONS HOTLINE: 1 (800) 546-2739
TYPICAL PERFORMANCE
GRAPHS
MP38 • MP38A
ꢌꢊꢂꢁꢄꢃꢍꢁꢄꢅꢆꢎꢏꢐ
ꢑꢅꢄꢋꢊꢏꢎꢉꢃꢍꢎ�ꢆꢊꢄꢆꢎꢊꢏ
�ꢊꢅ
�ꢃꢀ
�ꢀꢀ
�ꢀꢀ
�ꢀ
�ꢲꢏ
ꢐ
ꢙ
ꢳꢉ�ꢀ
ꢙꢉ
�ꢀꢲꢏ
�ꢁꢀ
�ꢀꢀ
ꢜꢀ
ꢛꢀ
ꢃꢀ
ꢁꢀ
ꢀ
ꢳꢉꢬꢚꢤꢂꢛ
ꢒꢗꢋꢐꢠꢉꢳꢉꢜꢱ
ꢏꢉ
�ꢀ
�
�
ꢀꢈ�
ꢄꢀꢲꢘ
�ꢁꢄꢟꢊ
ꢄꢀꢘ
ꢜꢄꢟꢊ
�ꢀ
ꢀꢈꢀ�
ꢁꢄꢟꢊ
ꢀꢈꢀꢀ�
ꢀꢈ�
ꢀ
ꢁꢀ
ꢃꢀ
ꢛꢀ
ꢜꢀ
�ꢀꢀ
�ꢀꢀ
�ꢭ
�ꢀꢭ
�ꢀꢀꢭ
�
�ꢀꢀ
ꢊꢐꢏꢅꢉꢇꢅꢌꢍꢅꢒꢐꢇꢝꢒꢅꢞꢉꢇꢊꢉꢓꢟꢊꢖ
ꢕꢒꢅꢦꢝꢅꢎꢊꢡꢞꢉꢕꢉꢓꢨꢩꢖ
ꢏꢝꢍꢍꢗꢡꢉꢢꢣꢉꢋꢝꢇꢍꢝꢇꢉꢠꢑꢕꢕꢅꢒꢅꢎꢇꢑꢐꢗꢞꢉꢙꢏꢤꢙꢋꢉꢓꢙꢖ
ꢌꢑꢅ�ꢁꢃꢄꢁ�ꢌꢊꢏ�ꢁ
ꢌꢊꢂꢁꢄꢃꢄꢁ�ꢌꢊꢏ�ꢁ
�ꢋꢅꢀꢀꢃ�ꢎꢐꢏꢅꢀꢃꢄꢁ�ꢌꢊꢏ�ꢁ
�ꢀꢀꢀ
ꢀ
ꢤꢂꢀ
�ꢃꢀ
�ꢁꢀ
�ꢀꢀ
ꢜꢀ
ꢁꢁꢀꢔꢕ
ꢤꢛꢀ
�ꢀꢀ
ꢃꢮꢀꢔꢕ
�ꢀꢀꢔꢕ
ꢃꢮꢀꢔꢕ
ꢤꢯꢀ
ꢛꢀ
ꢁꢁꢀꢔꢕ
ꢃꢀ
ꢤ�ꢁꢀ
ꢤ�ꢄꢀ
ꢤ�ꢜꢀ
ꢤꢁ�ꢀ
�ꢀꢀꢔꢕ
ꢁꢁꢀꢔꢕ
�ꢀ
ꢁꢀ
ꢃꢮꢀꢔꢕ
ꢀ
�ꢀꢀꢔꢕ
ꢤꢁꢀ
ꢤꢃꢀ
�
�
�ꢀ �ꢀꢀ �ꢭ �ꢀꢭ �ꢀꢀꢭ �ꢌ �ꢀꢌ
ꢕꢒꢅꢦꢝꢅꢎꢊꢡꢞꢉꢕꢉꢓꢨꢩꢖ
�
�ꢀ
�ꢀꢀ
�ꢀꢀꢀ
�
�ꢀ �ꢀꢀ �ꢭ �ꢀꢭ �ꢀꢀꢭ �ꢌ �ꢀꢌ
ꢕꢒꢅꢦꢝꢅꢎꢊꢡꢞꢉꢕꢉꢓꢨꢩꢖ
ꢕꢒꢅꢦꢝꢅꢎꢊꢡꢉꢓꢧꢨꢩꢖ
ꢊꢒꢆꢌꢒꢆꢃꢇꢊꢀꢆꢅꢐꢁꢃ�ꢂꢎꢏꢐ
�ꢀꢁꢂꢃꢄꢅꢆꢁꢃꢇ�ꢈꢃꢉꢊꢋꢌꢈ
ꢯ
ꢜ
ꢮ
ꢛ
ꢄ
ꢃ
ꢂ
ꢁ
�
ꢀ
ꢄꢀ
ꢃꢀ
ꢂꢀ
ꢁꢀ
�ꢀꢱꢉꢗꢋꢐꢠ
�ꢀ
ꢀ
ꢀ
ꢁ
ꢃ
ꢜ
�ꢀꢀ
ꢁꢀꢀ
ꢂꢀꢀ
ꢃꢀꢀ
ꢄꢀꢀ
ꢛ
�ꢀ
ꢋꢝꢇꢍꢝꢇꢉꢊꢝꢒꢒꢅꢎꢇꢞꢉꢑꢋꢉꢓꢐꢖ
ꢅꢆꢇꢈꢉꢊꢋꢌꢍꢅꢎꢏꢐꢇꢑꢋꢎꢉꢊꢐꢍꢐꢊꢑꢇꢋꢒꢉꢓꢔꢕꢖ
APEX MICROTECHNOLOGY CORPORATION • TELEPHONE (520) 690-8600 • FAX (520) 888-3329 • ORDERS (520) 690-8601 • EMAIL prodlit@apexmicrotech.com
3
ABSOLUTE MAXIMUM RATINGS
SPECIFICATIONS
MP38 • MP38A
BYPASSING
GENERAL
Properbypassingofthepowersupplypinsiscrucialforproper
operation. Bypass the ±Vs pins with a aluminum electrolytic
capacitor with a value of at least 10µF per amp of expected
output current. In addition a .47µF to 1µF ceramic capacitor
should be placed in parallel with each aluminum electrolytic
capacitor. Both of these capacitors have to be placed as close
tothepowersupplypinsasphysicallypossible.Ifnotconnected
to the Vs pins (See BOOST OPERATION) the VB pins should
also be bypassed with a .47µF to 1µF ceramic capacitor.
Please read Application Note 1 "General Operating Con-
siderations" which covers stability, supplies, heat sinking,
mounting, current limit, SOA interpretation, and specification
interpretation. Visit www.apexmicrotech.com for design tools
that help automate tasks such as calculations for stability,
internal power dissipation, current limit; heat sink selection;
Apex’s complete Application Notes library; Technical Seminar
Workbook; and Evaluation Kits.
CURRENT LIMIT
USING THE IQ PIN FUNCTION
Thetwocurrentlimitsenselinesaretobeconnecteddirectly
acrossthecurrentlimitsenseresistor. Forthecurrentlimitto
work correctly pin 24 must be connected to the amplifier
output side and pin 23 connected to the load side of the
current limit resistor, RCL, as shown in Figure 1. This con-
nection will bypass any parasitic resistances, Rp, formed by
sockets and solder joints as well as internal amplifier losses.
The current limiting resistor may not be placed anywhere in
the output circuit except where shown in Figure 1.
The value of the current limit resistor can be calculated as
follows:
Pin 25 (Iq) can be tied to pin 6 (Cc1) to eliminate the class
AB biasing current from the output stage. Typically this would
remove 1-4 mA of quiescent current. The resulting decrease
in quiescent power dissipation may be important in some
applications. Note that implementing this option will raise the
output impedance of the amplifier and increase crossover
distortion as well.
COMPENSATION
The external compensation components CC and RC are con-
nected to pins 4 and 6. Unity gain stability can be achieved at
any compensation capacitance greater than 470 pF with at
least 60 degrees of phase margin. At higher gains more phase
shift can be tolerated in most designs and the compensation
capacitance can accordingly be reduced, resulting in higher
bandwidth and slew rate.
.7
I LIMIT
RCL
=
�
ꢀ
ꢄꢂ
�
ꢁ
ꢂꢃ
ꢄꢅ
ꢄꢆ
�
�
ꢇꢈ
ꢊ
APPLICATION REFERENCES
For additional technical information please refer to the fol-
lowing application notes.
ꢁꢌꢊꢍꢎ
ꢉꢊꢂꢋ
ꢏꢐꢑꢏꢒ
�
ꢈ
AN 1
AN 11
AN 38
General Operating Considerations
Thermal Techniques
Loop Stability with Reactive Loads
ꢀꢁꢓꢍ�ꢔꢕꢏꢖꢕꢇꢍ��ꢔꢌꢎꢕꢈꢁꢉꢁꢎ
BOOST OPERATION
With the V feature the small signal stages of the amplifier
areoperatedBathighersupplyvoltagesthantheamplifier'shigh
current output stage. +VS (pins 12-14) and –V (pins 18-20)
are connected to the high current output stage.SAn additional
10V on the VB pins is sufficient to allow the small signal stages
to drive the output transistors into saturation and improve the
outputvoltageswingforextraefficientoperationwhenrequired.
When close swing to the supply rails is not required the +V
and +V pins must be strapped together as well as the –VBB
and –VSSpins. The boost voltage pins must not be at a voltage
lower than the VS pins.
This data sheet has been carefully checked and is believed to be reliable, however, no responsibility is assumed for possible inaccuracies or omissions. All specifications are subject to change without notice.
4A
MP38U REV G JANUARY 2005 © 2005 Apex Microtechnology Corp
.
相关型号:
MP38115DQ
Switching Regulator, Current-mode, 6.5A, 1800kHz Switching Freq-Max, 3 X 3 MM, MO-229VEED-5, QFN-10
MPS
MP38115DQ-LF-Z
Switching Regulator, Current-mode, 6.5A, 1800kHz Switching Freq-Max, 3 X 3 MM, ROHS COMPLIANT, MO-229VEED-5, QFN-10
MPS
MP38115DQ-Z
Switching Regulator, Current-mode, 6.5A, 1800kHz Switching Freq-Max, 3 X 3 MM, MO-229VEED-5, QFN-10
MPS
MP38671DL
Switching Regulator, Current-mode, 12A, 800kHz Switching Freq-Max, 3 X 4 MM, MO-229VGED-3, QFN-14
MPS
MP38671DL-LF
Switching Regulator, Current-mode, 12A, 800kHz Switching Freq-Max, 3 X 4 MM, ROHS COMPLIANT, MO-229VGED-3, QFN-14
MPS
MP38671DL-LF-Z
Switching Regulator, Current-mode, 12A, 800kHz Switching Freq-Max, 3 X 4 MM, ROHS COMPLIANT, MO-229VGED-3, QFN-14
MPS
©2020 ICPDF网 联系我们和版权申明