51-703-013_技术文档

Low Pass EMI Filters

the industry’s most complete

Motor Line Feed-Through (MLFT) Filters are

line of EMI filters gives you

more style, size, IL performance

and cost alternatives

high capacitance filters specifically designed for

DC motor and other lower voltage applications.

This one-component solution addresses EMI

noise issues and eliminates the need for multiple

components and electrical connections… LP2

Solder-In Filters offer an ideal solution for applications

in critical areas where space does not allow for use

of mounting tools or hardware. Available in C, Pi and

standard L circuit configurations and primarily used in

filtering signal/data lines and AC power lines… LP3-LP7

9900 Series Filters have a knurled design

allowing them to be pressed into place

creating a reliable mechanical bond making

them an excellent choice for applications

where soldering is undesirable… LP8-LP11

Spec Spin Filters are an excellent choice

for applications that require many lines to

be filtered in close proximity to each other

due to their space saving #2-56 threaded

miniature EMI spanner design. These

filters are designed without a hex and do

not require soldering for installation… LP12

Resin Sealed Filters provide excellent

environmental protection in a rugged case

that is resin sealed at both ends and easily

mounted with a tapped hole or through hole.

These filters are provided in C, L and Pi configurations

with metric threading available… LP13-LP24

High Current Resin Sealed Filters are ideal

for use in high current 5 volt logic buss, as well

as ±48 VDC telephone rack buss, high current

switch mode power supplies and DC charging

systems. These filters feature rugged bolt-in

style for easy installation… LP25-LP26

Hermetically Sealed Filters feature hermetic

glass seals and high EMI filtering performance

making them highly reliable in the toughest

environmental conditions. These filters are

available with C, L, Pi, T and double T

configurations with MIL-F-15733 and MIL-

F-28861 QPL filters available… LP27-LP42

Value Added Assemblies offer flexible

solutions by allowing you to add connectors,

modify terminations or add wire harnesses, there-

by lowering your cost of acquisition and assembly,

reducing your production time/costs and inventory,

all while giving you a filter assembly that meets

your unique design challenges… LP43

Low Pass EMI Advantages

I

Wide range of package sizes, mounting options and

circuit configurations offering maximum design flexibility

API Technologies’ Spectrum Control brand

was founded in 1968 as a designer and

manufacturer of Electromagnetic Interference

(EMI) filters. Today, API continues that work,

combining knowledge with excellence.

These many years of experience have

yielded an engineering-driven team that

understands how and where potential EMI

problems exist in an electronic system

and how to best eliminate them. With an

extensive library of standard products and a

willingness to develop an application-specific

custom solution, our customers count on us

to help them satisfy global EMC standards

while meeting demanding design parameters.

I

Develop custom application-specific solutions addressing

your mechanical and electrical requirements

I

High reliability construction… built in accordance to

MIL-PRF-15733 or MIL-PRF-28861

I

Over 800 standard QPL products and DSCC part numbers

I

Effective filtering up to 18 GHz

I

Reliability testing available for customer specific requirements

For complete specs and drawings, visit eis.apitech.com/low_pass_filters.asp

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP1

Motor Line Feed-Through

(MLFT) Filters (Patent Pending)

As the world leader in EMC, API Technologies’

Spectrum Control brand has developed a family

of high capacitance filters specifically designed

for DC motor and other lower voltage applications.

The Motor Line Feed-Through (MLFT) filter is a

one-component solution that eliminates the need for

multiple capacitors, inductive coils, leads and PCB

assemblies requiring numerous electrical connections

and large amounts of space. MLFT filters (patent

pending) are engineered to provide the required EMI

filtering and mechanical interface at a reduced cost.

MLFT filters offer significant insertion loss to pass

global conductive and radiated EMC tests, such as

CISPR 25. Our standard line of filters can be designed

into mechanical packages for easy retrofit into existing

designs or as custom assemblies to simplify installation

during production. These filters are available in stamped

or threaded housings, with single or dual lines, and

round leads or Faston terminals for applications

to 100 volts.

Benefits

I

Easy installation, provides a connector interface

I

Excellent EMI filtering through GHz range

I

Competitive cost

I

Space saving EMI solution

I

Fewer electrical connections

I

Failsafe DC open circuit for safety concerns

I

Standard and custom filtering and

mechanical packages

I

Transient voltage and surge protection available

Ordering Information

Example: MLFT2-001-TFCAC

The part number shown represents a single line, threaded MLFT Filter with Faston Terminals, a capacitance rating

of 0.20 µF and a voltage rating of 100V.

MLFT2 - 001 - T

F

CA

C

Motor Line

Style

Terminal

Capacitance

Voltage Rating

Feed-Through Filter

T = Single line

threaded

S = Single line

stamped

F = .110

Faston

R = .062

round lead

CA = .20 µF

CC = 2000 pF

CD = 20 pF

C = 100V

D = Dual line

stamped

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP2

Solder-in Filters

Solder-in filters are ideal for use in critical areas where

space does not allow use of mounting tools or hardware.

The solder-in feature also allows installation in unison

with other board mounted components. Primarily used

in filtering signal/data lines and DC power lines.

Features

I

Small size to allow effective use of space

I

Voltage ratings to 750 VDC

I

Multiple circuit configurations: C, L & Pi available

I

High temperature construction to prevent reflow during installation

I

MIL-F-15733 QPL versions available

ø .062 .005

(ø 1.59 .13)

.359 .015

(9.11 .38)

ø .281 .015

(ø 7.14 .38)

.093 .015

(2.38 .38)

.093 .015

(2.38 .38)

.390 .030

(9.91 .76)

ø B .015

(ø B .38)

ø A Max.

.203 .015

(5.15 .38)

ø .190 Max.

.140 Max.

(3.57 Max.)

(ø A Max.)

(ø 4.83)

.170 .030

(4.34 .76)

ø .040 .005

(ø 1.02 .13)

ø .044 .005

(ø 1.12 .13)

Figure 1

Figure 2

ø .281 .015

(ø 7.14 .38)

.093 .015

(2.38 .38)

.093 .015

(2.38 .38)

.05 .01

(1.27 .25)

.093 .015

(2.38 .38)

ø .190 Max.

(ø 4.83)

.343 .030

(8.73 .76)

Figure 3

ø .281 .015

(ø 7.14 .38)

.093 .015

(2.38 .38)

.093 .015

(2.38 .38)

.05 .01

(1.27 .25)

.093 .015

(2.38 .38)

.328 .030

(8.33 .76)

ø .190 Max.

(ø 4.83)

.343 .030

(8.73 .76)

ø .062 .005

(ø 1.59 .13)

Figure 4

Figure 5

Dimensions in inches (mm)

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP3

Solder-in Filters

Solder-in C Circuit

Minimum Insertion Loss (dB)

See

Pg. LP3

for Fig.

Rated Voltage

125°C

A

B

I

10

GHz

1

10

MHz MHz

1

30

100

300

Part Number

54-786-003

Amp

Cap*

In

(mm)

In

(mm)

DC

GHz

MHz MHz MHz

1

4

3

2

4

3

2

3

4

5

0.156 (3.96) 0.203 (5.16)

0.125 (3.18) 0.184 (4.67)

50

10

25

10

0.30 µF

32

16

—

47

33

—

4

54

41

—

60

45

—

12

15

20

66

48

10

22

25

70

50

20

25

35

70

50

20

25

40

54-785-002

100

250

750

0.05 µF (min)

100 pF ± 20%

470 pF ± 20%

1000 pF

54794002X5R101M

54803004X5R101M

54802002X5R101M

¦ 54794002X5R471M

¦ 54803004X5R471M

54802002X5R471M

¦ 54802002X5V102P

¦ 54803004X5V102P

¦ 54794002X5V102P

¦ 54-786-077

—

1000 pF

1000pF

¦

Also available through API’s authorized distributors.

* Tolerances are +100/-0% unless noted.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP4

Solder-in Filters

Solder-in Pi Circuit

.315 .015

(8.00 .38)

ø .140 .010

(3.56 .25)

B

.031

A

.031

ø .195 .005

(ø 4.95 .13)

(B .79)

(A .79)

.103 .015

(2.6 .38)

ø D .005

(D 0.13)

ø .110 .005

(ø 2.79 .12)

(D 0.13)

ø .140 .005

(ø 3.56 .12)

.093 .02

(2.36 .51)

A

.031

.156 .02

(3.96 .51)

(A .79)

B

.031

(B .79)

Figure 1

Figure 2

1.080 .031

(27.43 .79)

Tinned Metal

Ground Straps

.010 (.25)

.115 (2.92)

A

.031

B

.031

ø .195 .005

(ø 4.95 .13)

(A .79)

(B .79)

.400

(10.16)

ø .032 .005

ø 0.32 .005

(ø 0.81 0.13)

.156 .02

(3.96 .51)

ø .124

(3.15)

ø .140 .005

(ø 3.56 .12)

.219 .02

(5.56 .51)

.250 (6.35)

.415 (10.54)

Red Enamel

Figure 3

Figure 4

Solder Coating

.265 .030

(6.75 .76)

B

.010

ø .195

(ø 4.95)

(B .25)

ø .156 .015

(ø 3.97 .38)

.106 .030

(2.69 .76)

.020 Ref.

(.51)

.343 .030

ø .085 max.

ø .145

(ø 3.68)

(8.73 .76)

A

.010

(ø 2.2)

(A .25)

ø .033 min.

.156 .015

(3.97 .38)

ø .040 .005

(ø 1.02 .13)

(.84)

.468 .030

(11.91 .76)

Figure 5

Figure 6

.406 .031

(10.31 .79)

ø .234 max.

(ø 5.94)

.218 .031

(5.54 .79)

Turret Lead

.687 .031

(17.45 .79)

.500 .031

(12.70 .79)

ø .312 .031

(7.92 .79)

Figure 7

Figure 8

Dimensions in inches (mm)

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP5

Solder-in Filters

Solder-in Pi Circuit

Rated Voltage

125°C

Minimum Insertion Loss (dB)

M15733 See

MIL Pg. LP5

Part Number Number for Fig.

A

B

D

I

Min

Cap

10

GHz

1

10

MHz MHz

1

30 100 300

MHz MHz MHz

Amp

In

(mm)

In

(mm)

In

(mm)

DC

AC

GHz

/62-0003

3

2

4

2

3

5

1

3

1

2

6

2

6

2

3

1

7

0.312 (7.92) 0.469 (11.91) 0.032 (0.81)

0.268 (6.81) 0.780 (19.81) 0.032 (0.81)

0.257 (6.53) 0.780 (19.81) 0.032 (0.81)

70

—

10 1500 pF

10 0.012 µF

10 0.022 µF

10 1300 pF

10 1500 pF

—

5

22

25

35

25

5

12

50

60

15

12

15

17

15

12

15

17

15

25

30

25

50

70

30

45

40

45

40

50

35

50

35

50

55

50

55

50

70

45

50

65

50

70

60

50

65

50

65

70

65

70

55

70

60

70

60

50

65

70

65

70

51-703-013*

51-750-309*

¦ 1234-000* €

51-749-304

1234-001

/62-0004

70

200

—

5

65

70

65

70

55

70

60

70

60

50

65

70

65

70

—

5

—

5

—

0.250 (6.35) 0.780 (19.81) 0.032 (0.81)

0.312 (7.92) 0.780 (19.81) 0.032 (0.81)

5

¦ 51-750-301*

¦ 1233-000* €

¦ 51-750-302*

51-750-313

¦ 51-723-303

51-713-010

¦ 1251-001 €

51-703-001*

¦ 1203-050 €

51-703-012*

51-713-002

1214-029

—

7

—

7

/51-0002

—

7

—

/62-0002

—

1.140 (28.96) 1.277 (32.44) 0.032 (0.81) 200

1.109 (28.17) 1.206 (30.63) 0.032 (0.81) 200

0.312 (7.92) 0.406 (10.31) 0.032 (0.81) 200

5

—

8

—

5

/62-0001

—

0.312 (7.92) 0.406 (10.31) 0.032 (0.81) 200 140 10 1500 pF

3

1.103 (28.01) 1.212 (30.78) 0.032 (0.81) 200

0.288 (7.31) 0.780 (19.81) 0.032 (0.81) 200

—

90

—

10 1500 pF

10 1750 pF

10 3000 pF

5

—

5

—

0.093 (2.36) 0.157 (3.99)

—

200

5

¦ 1214-007 €

51-707-002*

¦ 1214-001*

¦ 51-707-006*

51-707-007

51-707-026

¦ 51-750-322

51-703-007*

1223-012

—

0.288 (7.31) 0.780 (19.81) 0.032 (0.81) 200

8

—

5

/33-0001

/33-0002

/66-0001

—

5

0.288 (7.31) 0.157 (3.99)

—

200

5

1.123 (28.52) 1.347 (34.21) 0.040 (1.02) 200

7

/51-0001

—

0.312 (7.92) 0.406 (10.31) 0.032 (0.81) 200 200 10 5500 pF

15

7

0.240 (6.10) 0.360 (9.14) 0.040 (1.02) 200

—

15 3000 pF

25 3000 pF

—

0.210 (5.34)

0.234 (5.94)

—

500

8

¦ 1204-050 €

51-704-002

/40-0001

500 350 25 3000 pF

7

*

Denotes parts with turret on one end per Figure 8.

Also available through API’s authorized distributors.

Also available through API’s authorized European distributors/agents.

¦

€

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP6

Large Diameter Solder-in

High Temp Filters

Features

I

.400" diameter mounting vs .128" diameter mounting

I

High temperature construction withstands 300°C

installation temperatures

I

Increased capacitance values than standard

9900 series - up to 1.2uF

I

EMI filtering from 500KHz up to 10GHz

I

15 Amp current rating

I

Ideal for low to medium impedance circuits where

large amounts of capacitance to ground can be

tolerated (feed-thru “C” circuit)

I

Glass seal one end provides protection from hostile

environments and maintain hermeticity

I

Rugged monolithic discoidal capacitor construction

I

Gold plated suited for gold bonding

I

Designed to be soldered into a package,

bracket or bulkhead

I

Reverse seal available

I

Special lead length and end terminations available

Large Diameter Solder-in High Temp Filters

Minimum Insertion Loss (dB)

1

GHz

10

GHz

Min

500

1

MHz

10

MHz

100

MHz

Part Number

Circuit

DC Voltage Cap (µf)

KHz

33

26

31

7

17

—

7

AMP

15

1.2

.50

.75

1.0

.050

.15

.010

C

37

34

37

40

15

24

4

52

42

43

48

34

38

20

34

70

58

62

64

42

50

34

44

70

50

70

60

70

50

100

200*

400

SCI-9945-125H

SCI-9945-504H

SCI-9945-754H

SCI-9945-105H

SCI-9945-503HAC

SCI-9945-154HAC

SCI-9945-103H

SCI-9945-503H

.050

400

15

* Rated 200VDC or 125VAC/400Hz

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP7

Miniature Solder-in Filters

9900 Series

These filters are ideal for microwave applications such

as attenuators and oscillators, and perform well in high

impedance circuits where large capacitance values

are not practical.

Features

C Circuit L Circuit

.625 Ref. .715 Ref.

I

Miniature size to allow effective use of space

(15.88)

(18.16)

I

Standard capacitance values from 5pF to .033µF

.25±.03

(6.35±0.76)

ø .156 ±.005

(3.96 ±0.13)

I

Voltage ratings to 200 VDC/115 VAC 0–400 Hz

I

Hermetically sealed on one end allows for

through-hole sealing between compartments

I

High temperature construction meets MIL-F-28861

solderability and resistance to soldering

heat requirements

.020±.005

(0.51±0.13)

ø .128±.005

(3.25±0.13)

ø .030

(ø 0.76)

C Circuit

.110±.005

(2.79±0.13)

L Circuit

.200±.005

(5.08±0.13)

I

Available in MIL-C-11015 versions — see page CF10

Glass Seal (STD)

I

Gold plating compatible with gold bonding techniques

Figure 1

Marking C Circuit

Color dot standard as follows:

G

272 Red

502 Blue

153 Pink

–

2700pF

5000pF

G

101 Green

–

100pF

500pF

G

501 Brown –

102 Purple –

Glass Seal (Reverse)

15000pF

1000pF

1200pF

Figure 1 (Reverse)*

000 None – 10pF max

122 White

–

Dimensions in inches (mm)

Marking L Circuit

Color dot standard as follows:

G

103 2White –

153 2White –

.01µF

.015µF

G

100 Violet

250 Blue

–

10pF

25pF

G

273 2Red

333 2Red

–

27000pF

.033µF

102 White

152 White

1000pF

1500pF

5000pF

502 Yellow –

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP8

Miniature Solder-in Filters

9900 Series

Miniature Solder-in C Circuit

Rated Voltage

Minimum Insertion Loss (dB)

125°C

10

GHz

I

Min

Cap

1

MHz

10

MHz

1

GHz

30

MHz

100

MHz

300

MHz

Part Number*

AC

Figure

Amp

DC

50

100

200

60

55

40

45

10

20

35

1

0.015 µF

0.030 µF

2700 pF

5000 pF

4 pF max.

100 pF

7

25

30

10

15

—

5

30

35

18

20

—

10

40

45

25

30

—

3

40

50

33

35

—

10

22

28

60

55

50

55

10

28

40

45

5

SCI-9900-153

SCI-9900-303

¦ SCI-9910-272

¦ SCI-9910-502

SCI-9900-000

¦ SCI-9920-101

¦ SCI-9920-501

¦ SCI-9920-122

10

—

115

500 pF

1200 pF

15

20

* For reverse glass seal add an “R” to the end of the part number (SCI-9900-153R).

¦

Also available through API’s authorized distributors.

Parts are RoHS Compliant

Miniature Solder-in L Circuit

Rated Voltage

125°C

Minimum Insertion Loss (dB)

10

I

Min

Cap

10 pF

1

MHz

10

100

1

Part Number*

GHz

20

35

42

65

50

53

65

25

55

75

38

55

Figure

Amp

MHz

DC

200

50

MHz

GHz

1

—

8

—

10

—

8

13

—

8

—

8

27

8

10

28

—

13

33

35

—

17

—

5

7

10

SCI-9980-100

SCI-9980-101

SCI-9980-102

SCI-9980-103

SCI-9980-122

SCI-9980-152

SCI-9980-153

SCI-9980-250

SCI-9980-272

SCI-9980-273

SCI-9980-333

SCI-9980-501

SCI-9980-502

100 pF

1000 pF

.01 uF

1200 pF

1500 pF

.015 uF

25 pF

2700 pF

27,000 pF

.033 uF

500 pF

5000 pF

22

40

65

42

43

65

13

45

75

37

47

25

48

28

50

—

32

53

55

18

35

200

* Reverse seal available. Add R at the end of the part number. (SCI-9980-102R).

Note: Hi-rel versions available. Add R after the first dash. (SCI-R9980-102).

Lt circuit part number series SCI-9981-XXX.

Parts are RoHS Compliant

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP9

Spec Mini Solder-in

Feed-Thru Filters

API Technologies miniature solder-in filters are

hermetically sealed on one end for thru-hole sealing

between compartments allowing it to be soldered into

a package, bracket, or bulkhead while maintaining

hermetically. These mini EMI filters are ideal for a

variety of products intended for use in the microwave

frequency spectrum including oscillators, attenuators,

and synthesizers. The high temperature construction

meets military requirements for solderability and

resistance to soldering heat and its high-purity gold

plating provides excellent compatibility with gold

bonding techniques.

Features

I

.120" diameter mounting

I

Capacitance values from 5pF to .027µF

I

RoHS compliant

Dimensions in inches (mm)

I

Reverse seal available

I

High temperature construction

Minimum Insertion Loss (dB)

10

GHz

5

DC

Amps

Working

Voltage

200

100

50

Cap

(µf)

5

10

25

50

100

250

500

1000

1500

2700

5000

10,000

27,000

500

KHz

1

MHz

10

MHz

100

MHz

1

GHz

—

5

Part Number

5

—

4

—

5

—

3

SCI-9909-008

SCI-9909-009

SCI-9909-010

SCI-9909-011

SCI-9909-012

SCI-9909-013

SCI-9909-014

SCI-9909-015

SCI-9909-016

SCI-9909-017

SCI-9909-018

SCI-9909-019

SCI-9909-020

20

25

28

30

40

45

50

55

60

65

10

20

22

35

40

45

50

55

5

15

20

22

25

30

35

42

5

10

15

21

28

50

10

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP10

Spec Mini-Press

9900 Series

This new knurled filter is designed to be pressed

into place and create a reliable mechanical bond. This

feature makes it an excellent selection for applications

where soldering is undesirable. Suitable plating is

available that allows gold bonding to the terminals.

.156

.005

dia.

(3.96

.127

dia.)

Applications

.625 (15.88) ref.

.025

These filters are ideal for microwave and RF applica-

tions such as attenuators, synthesizers, and oscillators.

They perform well in high impedance circuits where

large capacitance values are not practical.

(0.635)

.010

.250

.030

(6.35

.762)

.002

(.254

.051)

.030

.002

dia.

(.762

.051

dia.)

.143 .002

(3.63 .051)

Installation

.020

.005

(.508

.127)

Glass Seal End

Straight Knurl,

160 D.P.

I

.136" to .137" (3.45-3.48mm) diameter hole

.110

.005

(2.79

.127)

.128 .005

dia.

(3.25 .127

dia.)

I

Hole must be free of all insulating materials.

Epoxy

Seal

Installation tool must have a hole of sufficient depth

and diameter to accept the terminal of the filter.

Built and tested in accordance with MIL-F-15733.

Figure 1

I

Installation force must be applied gradually and

smoothly until the flange of the filter is seated against

the receiving part (request installation instructions).

Dimensions in inches (mm)

Mechanical Specifications

Installation . . . . . . . . . . . . . Press-in

Plating . . . . . . . . . . . . . . . . Gold

Seal . . . . . . . . . . . . . . . . . . Glass sealed on one end,

. . . . . . . . . . . . . . . . . . . . . resin sealed on the other end

Termination Options . . . . . . Plating suitable for gold

. . . . . . . . . . . . . . . . . . . . . bonding

Operating Temperature . . . . -55°C to +125°C

Circuit Schematic

Input

Insertion Tool

Output

Part Number: SCI-9925-200

Ground

Rated Voltage

Minimum Insertion Loss (dB)

125°C

10

GHz

I

1

MHz

7

10

—

10

MHz

1

GHz

30

MHz

100

MHz

300

MHz

Part Number

Figure

Amp

Cap

DC

50

100

200

1

5

0.015 µF +100%/-0%

0.030 µF +100%/-0%

5000 pF +100%/-0%

10 pF max.

100 pF +100%/-0%

500 pF +100%/-0%

1200 pF +100%/-0%

2700 pF +100%/-0%

25

30

15

—

5

30

35

20

—

10

18

40

45

30

—

3

15

20

25

40

50

35

—

10

22

28

33

60

55

45

10

20

35

40

60

55

10

28

40

45

50

¦ SCI-9925-153

¦ SCI-9925-303

¦ SCI-9925-502

¦ SCI-9925-000

¦ SCI-9925-101

¦ SCI-9925-501

¦ SCI-9925-122

SCI-9925-272

10

¦

Also available through API’s authorized distributors.

Note: Parts are RoHS Compliant

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP11

Spec Spin Filters

API Technologies’ Spectrum Control brand introduces

the new space saving #2-56 threaded miniature EMI

spanner filter. This new threaded filter is designed

without a hex and does not require soldering for

installation. These features make it an excellent

selection for applications that require many lines to

be filtered in close proximity. The easy swap out also

allows for flexibility in filter replacement and capacitance

substitution. Easy filter substitution also allows for

flexibility in filter placement. Custom design queries

are always welcome.

ø.105 .005 (2.67)

.020 (0.51)

.290 (7.36)

.240 (6.11)

.140 (3.57)

.081 (2.06)

Applications

1-1/2 Imperfect

Threads

API’s Spectrum Control brand spanner filter offers

superior insertion loss over a broad frequency range

when compared to surface mount components. The filter

is available in capacitance values up to 10,000 pF, and

is featured in a microcircuit package used in microwave

applications such as frequency synthesizers, power

amplifiers, MMW radio, and is ideal for commercial

and high-reliability applications.

#2-56 Unc-2A

.024 (0.61)

Built and tested in accordance with MIL-F-15733.

Dimensions in inches (mm)

Mechanical Specifications

Center Spacing . . . . . . . . . . .0.110"

Lead Finish. . . . . . . . . . . . . Gold

Bushing Finish . . . . . . . . . . Gold

Electrical Specifications

Operating Temperature . . . . -55°C to +125°C

Voltage Rating . . . . . . . . . . 50 VDC

Current Rating . . . . . . . . . . 5 A

Tightening Torque . . . . . . . . 14 oz-in (± 2)

Effective Filtering From. . . . 1 MHz to 10 GHz

Capacitance . . . . . . . . . . . . to 10,000 pF

(0.11Nm)

Insertion Tool

Part Number: 54-874-020

Dielectric Withstanding

Voltage . . . . . . . . . . . . . . . . . 125 VDC

Part Number*

Cap (pF)

Max. Tolerance

Circuit

Current

Voltage

DWV

I.R.

Temperature Range

54-874-010

54-874-011

54-874-012

54-874-013

54-874-014

54-874-015

54-874-016

54-874-017

54-874-018

10

39

100

+0%/-20%

+50%/-20%

390

C

5 A

50 VDC

125 VDC

1,000 MΩ

-55°C to +125°C

1,000

2,000

3,300

4,700

10,000

+100%/-0%

+80%/-20%

Note: Parts are RoHS Compliant

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP12

Resin Sealed Bolt-in Filters

These filters are easily mounted in a tapped hole or

through-hole with supplied nut and lock-washer. The

rugged case with resin seals at both ends provides

excellent environmental protection. Primarily used

in filtering signal/data lines and DC power lines.

Features

I

Wide range of sizes: 4-40 thread through

5/16-24 thread

I

Voltage ratings to 500 VDC/220 VAC (400 Hz)

I

MIL-F-15733 QPL filters available

I

Multiple circuit configurations: C, L and Pi

I

Metric threaded filters available, consult factory

4-40 C Circuit

.510 .031

(13.0 .79)

.310 .031

(7.87 .79)

.368 .031

(9.347 .79)

.275 .031

(6.99 .79)

.156 Hex.

(3.96)

.156 Hex.

(3.96)

.120

(3.05)

.120

(3.05)

.050 (1.27)

ø .025 .005

(.64 .13)

ø .032 .005

(.810 .13)

.220

(5.59)

.220

(5.59)

#4–40 Unc–2A Thd.

Figure 1

Figure 2

.360 .031

(9.144 .79)

.240 .031

(6.10 .79)

.156 Hex.

(3.96)

.120

(3.05)

.315 .031

(8.00 0.79)

.225 .031

(5.72 0.79)

.140

(3.56)

.075

(1.91)

.125 Hex.

(3.18)

ø A .005

.13)

(

.220

(5.59)

ø .032

(ø 0.81)

#4–40 Unc–2A Thd.

Figure 3

Figure 4

Dimensions in inches (mm)

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP13

Resin Sealed Bolt-in Filters

4-40 C Circuit

Rated Voltage

See

Minimum Insertion Loss (dB)

125°C

A

Pg. LP12

for Fig.

I

Min

Cap

10

GHz

1

3

10

1

30 100 300

MHz MHz MHz

Part Number

¦ SCI-9110-100

Amp

DC

AC

In

0.032 (0.81)

(mm)

MHz MHz MHz

GHz

3

2

1

2

1

3

1

3

4

2

3

2

3

2

3

2

1

50

—

10

3

10 pF

5000 pF

0.031 µF

0.045 µF

0.050 µF

100 pF ± 20%

2700 pF

5600 pF

0.027 µF

0.05 µF

10 pF

—

12

14

15

—

20

22

24

—

20

24

—

12

9

—

15

25

30

34

—

9

—

22

35

40

41

—

18

24

37

41

—

11

9

—

30

40

45

—

27

25

33

45

—

3

—

35

45

50

10

33

37

45

50

—

10

55

60

25

35

50

40

60

10

28

40

28

20

40

45

50

55

60

40

50

—

45

55

60

20

35

40

55

60

10

20

35

20

35

28

35

40

50

28

50

¦ 9900-381-6004

9900-381-6026

¦ 9900-381-6006

¦ 54-790-023

¦ 54790001X5F101M

54-790-019

50

—

100

200

300

—

10

15

30

35

—

5

9900-381-6013

54-790-020

—

0.016 (0.41)* 10

0.020 (0.51) 10

SCI-9112-273

SCI-9110-273

54-790-022

—

10

3

—

10

—

0.016 (0.41)* 15

0.020 (0.51) 15

¦ SCI-9112-503

SCI-9110-503

54-862-001

—

10

3

—

7

—

100 pF

10

25

10

20

28

37

45

28

45

54-862-002

—

1000 pF

100 pF

15

3

54-862-003

—

¦ 9900-381-6020

SCI-9122-101

SCI-9120-101

9900-381-6021

SCI-9122-102

SCI-9120-102

¦ 9900-381-6022

SCI-9122-502

SCI-9120-502

SCI-9122-103

SCI-9120-103

9900-381-6005

¦ 54-790-018

¦ 54-790-021

115

—

100 pF

0.016 (0.41)*

0.020 (0.51)

—

15

20

33

38

35

20

38

10

3

100 pF

500 pF

—

115

—

1000 pF

1200 pF

5000 pF

0.01 µF

0.015 µF

1000 pF

0.01 µF

0.016 (0.41)*

0.020 (0.51)

10

3

—

115

—

0.016 (0.41)*

0.020 (0.51)

0.016 (0.41)*

0.020 (0.51)

15

20

—

20

24

29

9

10

3

10

—

9

—

29

*

Tinned, steel leads.

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP14

Resin Sealed Bolt-in Filters

4-40 L and Pi Circuit

.360 .031

(9.144 .79)

.240 .031

(6.10 .79)

.156 Hex.

(3.96)

.120

(3.05)

ø A .005

(

.13)

.220

(5.59)

#4–40 Unc–2A Thd.

Figure 1

Dimensions in inches (mm)

Rated Voltage

125°C

Minimum Insertion Loss (dB)

A

I

Min

Cap

10

GHz

1

3

10

1

30 100 300

MHz MHz MHz

Figure

Part Number

¦ 51-729-305

Amp CKT

DC

AC

In

(mm)

MHz MHz MHz

GHz

1

50

—

3

Pi

5500 pF

0.018 (0.46)

—

7

14

15

37

27

30

35

5

40

42

34

38

42

15

30

60

65

52

43

45

54

42

41

70

55

47

45

56

65

45

70

55

70

1

50

—

3

Pi

7000 pF

0.075 µF

0.022 µF

0.027 µF

0.05 µF

1500 pF

0.01 µF

0.018 (0.46)

8

70

55

65

70

¦ 51-729-312

SCI-3102-002

SCI-3102-000

SCI-3102-007

¦ 51-729-304

¦ SCI-3112-002

¦ SCI-3112-000

SCI-3112-007

SCI-3112-102

SCI-3112-100

SCI-3112-107

¦ 51-729-303

SCI-3122-002

SCI-3122-000

SCI-3122-007

50

3

LB

Pi

0.016 (0.41)* 18

0.016 (0.41) 18

0.025 (0.64) 18

25

17

20

24

—

12

50

—

5

50

—

10

3

100

200

—

0.018 (0.46)

7

—

5

0.016 (0.41)* 10

0.016 (0.41) 10

0.025 (0.64) 10

0.016 (0.41)* 15

0.016 (0.41) 15

0.025 (0.64) 15

—

5

—

10

3

—

5

—

10

3

—

0.018 (0.46)

0.016 (0.41)*

0.016 (0.41)

0.025 (0.64)

—

115

3

LB

21

5

10

*

Tinned, steel leads.

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP15

Resin Sealed Bolt-in Filters

6-32 C, L, Pi/6-40 Pi

.500 .031

(12.7 .79)

.320 .031

(8.13 .79)

#6-40 Unf–2A Thd.

.220 (5.59)

ø A .005

(

.13)

.130 (3.30)

ø .032 .005

(ø 0.81 .79)

.050 (1.27)

.125

(3.18)

.950 .031

(24.13 .79)

.290 .031

(7.37 .79)

.225

(5.72)

.125 (3.18) Hex.

#6–32 Unc–2A

.156 Hex.

(3.96)

Figure 1

Figure 2

ø .156 (3.96)

Same as Figure 1

except with turret lead

Figure 3

Dimensions in inches (mm)

Rated Voltage

125°C

Minimum Insertion Loss (dB)

A

I

Min

Cap

10

GHz

1

3

10

1

30 100 300

MHz MHz MHz

Figure

Part Number

Amp CKT

DC

AC

In

(mm)

MHz MHz MHz

GHz

1

50

—

3

Pi

C

5500 pF

0.018 (0.46)

—

7

14

18

40

—

9

30

45

44

—

55

65

47

—

70

55

—

70

65

10

28

35

50

60

70

60

70

40

¦ 51-726-008

1

3

1

2

1

50

—

3

9000 pF

0.10 µF

0.018 (0.46)

8

70

65

10

28

35

50

60

55

60

70

60

70

40

51-726-017

54-779-019

50

10

3

0.032 (0.81) 22

31

—

9

100

200

C

10 pF ± 20% 0.032 (0.81)

—

7

¦ 54779001X5F100M

¦ 54779001X5U102P

54-779-014

C

1000 pF

2700 pF

0.01 µF

0.022 µF

0.027 µF

0.050 µF

1500 pF

3000 pF

5600 pF

0.032 (0.81)

10

18

29

34

37

41

15

24

21

27

38

43

45

42

40

50

33

28

33

45

50

65

60

65

37

€

C

20

27

30

34

5

54-779-016

LB

C

17

20

24

—

¦ 51-726-002

54-779-017

0.032 (0.81) 10

0.032 (0.81) 15

C

54-779-018

Pi

C

0.018 (0.46)

0.032 (0.81)

—

¦ 51-726-001

¦ 1289-001

10

5

8

¦ 1289-004

15

54-779-015

¦

Also available through API’s authorized distributors.

Also available through API’s authorized European distributors/agents.

€

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP16

Resin Sealed Bolt-in Filters

8-32 C Circuit

.890 .031

(22.6 .79)

.312 .031

(7.92 .79)

.421 .031

.328 .031

(8.33 .79)

(10.7 .79)

.040 Max.

ø .040 .005

(1.02 .13)

(1.02)

.140

(3.56)

ø .032 .005

(0.81 .13)

.093

(2.36)

.050

(1.27)

#8–32 Unc–2A Thd.

.187 Hex.

(4.75)

.234

(5.94)

.266

(6.77)

.187

(4.75)

Figure 1

Figure 2

.466 .031

(11.84 .79)

.293 .031

(7.44 .79)

.631 .031

(16.03 .79)

.265 .031

(6.73 .79)

.266

(6.76)

.130

(3.30)

ø .051 .005

(1.3 .13)

ø .032 .005

(0.81 .13)

.093

(2.39)

.050

(1.27)

#8–32 Unc–2A Thd.

.266

.187 Hex.

#8–32 Unc–2A Thd.

.187

(4.75) Hex.

(6.77)

(4.75)

Figure 3

Figure 4

Dimensions in inches (mm)

Rated Voltage

125°C

Minimum Insertion Loss (dB)

I

Min

Cap

10

GHz

1

3

10

1

30 100 300

MHz MHz MHz

Figure

Part Number

SCI-9200-503

Amp

DC

AC

MHz MHz MHz

GHz

2

50

—

10

0.05 µF

0.12 µF

0.21 µF

0.08 µF

80 pF

15

20

28

15

—

10

15

20

—

24

30

37

24

—

9

35

43

45

37

—

20

30

34

38

8

41

45

50

41

—

11

29

36

41

44

17

24

—

11

24

45

55

51

—

20

38

45

47

26

33

—

20

33

50

55

60

51

10

28

45

50

55

32

37

10

28

37

60

55

70

55

20

28

55

50

60

65

35

40

25

28

40

3

1

3

4

1

2

1

2

50

—

55

70

55

20

28

50

55

60

65

34

40

20

28

40

9950-381-6009

54-785-017

50

70

—

9950-381-6008

100

150

200

—

¦ 54713001X5F101M

¦ 54713001X5U102P

54-785-013

—

1000 pF

0.01 µF

0.027 µF

0.05 µF

0.1 µF

—

12

20

24

29

—

6

SCI-9210-103

SCI-9210-273

¦ 54-785-005

54-785-016

—

2000 pF

5000 pF

100 pF

54-785-011

—

15

—

15

54-785-012

115

—

6

SCI-9220-101

SCI-9220-102

SCI-9220-502

1000 pF

5000 pF

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP17

Resin Sealed Bolt-in Filters

8-32 L & Pi Circuit

.600 .031

(15.24 .79)

.132 .031

(3.40 .79)

L

.031

H

.031

.500 .031

.320 .031

(L .79)

(H .79)

(12.70 .79)

(8.13 .79)

.320

.150

(3.81)

ø .032 .005

(0.81 .13)

ø .032 .005

(0.81 .13)

.093 (2.36)

.266

(6.77)

.093

(2.36)

(8.13)

ø .040 .005

(1.02 .13)

Ref.

.187 (4.75) Ref.

.050

(1.27)

#8–32 Unc–2A Thd.

.187

(4.75) Hex.

.336 (8.53)

.187 Hex.

(4.75)

.187

(4.75) Hex.

#8–32 Unc-2A Thd.

#8–32 Unc–2A Thd.

Figure 1

Figure 3

Figure 2

.49 Min.

(12.45 Min.)

.31 Min.

(7.9 Min.)

.238 .031

.162 .031

.906 .031

(6.05 .79)

(4.11 .79)

(23.01 .79)

.150

(3.81)

.315

(8.00) Max.

.138

(3.51)

.062

(1.57)

ø .040 .005

(1.02 .13)

18 Awg.

ø .032 .005

(0.81 .13)

.475 .031

(12.06 .79)

.311 .031

(7.90 .79)

.216

(5.49)

.025

(0.64)

ø .032 .005

(.81 .13)

.187

#8–32 Unc–2A Thd.

.187

(4.75)

(4.75) Hex. #8–32 Unc–2A Thd.

.187

(4.75) Hex.

#8–32 Unc–2A Thd.

.050

(1.27)

.216

(5.49)

.093

(2.36)

Figure 6

Figure 4

Figure 5

Dimensions in inches (mm)

Rated Voltage

125°C

Minimum Insertion Loss (dB)

M15733

MIL

Number Fig.

H

L

I

Min

Cap

10

GHz

1

3

10

1

30 100 300

MHz MHz MHz

Part Number

Amp CKT

DC

AC

In

(mm)

In

(mm)

MHz MHz MHz

GHz

—

/61-0014

—

2

4

2

3

2

5

2

6

1

2

3

50

—

10

20

10

15

10

Pi

0.012 µF 0.265 (6.73) 0.413 (10.49)

0.012 µF 0.310 (7.87) 0.490 (12.45)

5000 pF 0.312 (7.92) 0.500 (12.70)

5

9

18

20

38

5

45

30

65

15

35

34

38

—

65

75

45

65

43

41

42

—

70

65

75

50

60

70

50

52

—

70

75

50

60

70

60

42

60

50

70

65

70

60

70

51-712-069 €

50

—

70

—

70

—

85

—

85

—

85

115

—

10

—

7

10

—

14

—

17

20

—

7

70

75

50

60

70

60

16

60

50

70

65

70

65

70

¦ 51-712-065

¦ 1250-054

70

—

70

0.028 µF

—

¦ 1293-001

/43-0002

/28-0001

/28-0002

/61-0008

—

100

125

200

3000 pF 0.312 (7.92) 0.578 (14.68)

3000 pF 0.312 (7.92) 0.890 (22.61)

51-712-055

¦ 51-712-014

51-712-028

¦ 51-712-063*

¦ 51-712-003 ◊

51-712-060 ◊

¦ 51-712-067

51-762-006

¦ 1250-059

5

3000 pF

—

5

5500 pF 0.312 (7.92) 0.500 (12.70)

15

27

28

30

—

5

LB 0.022 µF 0.280 (7.11) 0.850 (21.59)

/28-0004

/61-0013

/44-0003

—

LB 0.022 µF 0.312 (7.92) 0.890 (22.61) 10

LB 0.031 µF 0.280 (7.11) 0.890 (22.61) 10

Pi

65 pF

—

5

1500 pF

3000 pF

15

10

15

30

40

35

25

45

30

48

45

55

65

45

35

45

40

50

65

70

/44-0002

—

5

¦ 51-762-005

1250-062

5

/44-0001

—

10

8

¦ 51-744-003*

¦ SCI-3223-000

¦ 1250-003 €

¦ 51-712-001*

1250-049

2000 pF 0.312 (7.92) 0.890 (22.61)

3000 pF 0.312 (7.92) 0.890 (22.61)

3000 pF 0.312 (7.92) 0.578 (14.68)

5500 pF 0.265 (6.73) 0.413 (10.49)

—

5

—

5

—

5

—

14

28

¦ 51-744-002 ◊

¦ 1293-000

—

0.012 µF

—

10

◊

Supplied with .040" (1.02mm) diameter lead.

¦

€

*

Also available through API’s authorized distributors.

Also available through API’s authorized European distributors/agents.

Denotes parts with turret lead.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP18

Resin Sealed Bolt-in Filters

10-32 C & Pi Circuit

.421 .031

(10.7 .79)

.328 .031

(8.33 .79)

ø A .005

.140

(3.56)

(

.13)

#10–32 Unf–2A Thd.

.218

(5.54)

.234

(5.94)

Figure 1

.500 .031

(12.7 .79)

.359 .031

(9.12 .79)

ø A .005

.171

(4.34)

(

.13)

#10–32 Unf–2A Thd.

.328

(8.33)

.218

(5.54)

Figure 2

Dimensions in inches (mm)

Rated Voltage

125°C

Minimum Insertion Loss (dB)

A

I

Min

Cap

0.018 µF

10

GHz

1

3

10

1

30 100 300

MHz MHz MHz

Figure

Part Number

51-761-002

Amp CKT

DC

AC

In

0.032 (0.81)

(mm)

MHz MHz MHz

GHz

1

50

—

10

Pi

C

Pi

C

7

14

38

43

46

10

29

30

47

50

52

20

38

55

50

52

54

45

44

70

55

60

70

65

47

70

60

65

70

55

70

65

1

2

1

50

—

0.3 µF

0.56 µF

0.8 µF

0.01 µF

0.1 µF

0.040 (1.02) 30

0.040 (1.02) 35

0.040 (1.02) 40

70

65

¦ 54-786-013

54-786-028

¦ 54-786-014

51-761-001

54-786-027

50

100

200

0.032 (0.81)

—

0.040 (1.02) 20

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP19

Resin Sealed Bolt-in Filters

12-28 C /12-32 C Circuit

.594 .031

(15.08 .79)

.406 .031

(10.36 .79)

.468 .031

(11.89 .79)

.406 .031

(10.36 .79)

ø .051 .005

(1.30 .13)

.156

(3.96)

.140

(3.56)

#12–32 Unf–2A Thd.

#12–28 Unf–2A Thd.

.312

(7.92)

.250

(6.35)

.312

(7.92)

.234

(5.54)

Figure 1

Figure 2

.921 .031

(23.4 .79)

.343 .031

(8.71 .79)

.157

(3.99)

.250

(6.35)

.453 .031

.359 .031

(9.12 .79)

(11.51 .79)

.093 Max.

(2.36)

.032 .005

(0.81 .13)

.281

(7.14)

.187

(4.75)

ø .040 .005

(1.02 .13)

.062

(1.57)

.250

(6.35)

#12–32 Unef–2A Thd.

.187

(4.75)

.311

(7.9)

.312

(7.92)

.032

(0.81)

#12–32 Unef–2A Thd.

Figure 4

Figure 3

Dimensions in inches (mm)

Rated Voltage

125°C

Minimum Insertion Loss (dB)

I

Min

Cap

10

GHz

1

3

10

1

30 100 300

MHz MHz MHz

Figure

Part Number

9910-381-6004

Amp

CKT

DC

AC

MHz MHz MHz

GHz

4

35

—

15

10

15

10

15

C

1 µF

38

35

10

28

—

40

37

20

30

—

52

51

30

45

—

52

51

37

50

—

10

—

70

61

45

55

—

12

21

20

70

61

50

55

10

22

28

78

80

70

60

65

25

28

4

3

4

2

1

50

C

0.75 µF

65

55

60

20

25

28

9910-381-6003

SCI-9310-273

100

250

0.027 µF

0.30 µF

9910-381-6002

100 pF ± 20%

470 pF ± 20%

1000 pF

54804002X5R101M

¦ 54804002X5R471M

¦ 54804002X5V102P

54743001X5U102Z

1000 pF

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP20

Resin Sealed Bolt-in Filters

12-28 & 12-32 Pi Circuit

.921 .031

(23.4 .79)

.343 .031

(8.71 .79)

.453 .031

(11.5 .79)

.359 .031

(9.12 .79)

.157

(3.99)

B

ø A .005

.187

(4.75)

ø .032 .005

(ø .81 .13)

.093 Max.

(2.36)

(

.13)

.250

(6.35)

#12–32 Unef–2A Thd.

.187

(4.75)

.311

(7.9)

.281

(7.14)

.250

(6.35)

.032

(0.81)

Figure 1

Figure 2

.687 .031

(17.4 .79)

B

(

.031

.79)

ø .250

(ø 6.35)

.281

(7.14)

Same as Figure 3

Except as Shown.

ø A .005

.13)

(

#12–32 Unef–2A Thd.

.187

(4.75)

Figure 4

.406

(10.31)

.125

(3.18)

Figure 3

Same as Figure 1

Except as Shown.

Same as Figure 2

Except as Shown.

Turret Lead

Figure 7

Figure 6

#12–28 Unf–2A Thd.

Figure 5

Dimensions in inches (mm)

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP21

Resin Sealed Bolt-in Filters

12-28 & 12-32 Pi Circuit

Rated Voltage

Minimum Insertion Loss (dB)

M15733

MIL

See

Pg. LP20

125°C

A

B

I

Min

Cap

10

GHz

1

3

10

1

30 100 300

MHz MHz MHz

Part Number Number for Fig.

Amp

DC

AC

In

(mm)

In

(mm)

MHz MHz MHz

GHz

—

3

2

3

2

1

2

6

2

1

5

1

2

5

1

2

5

2

1

2

4

1

50

—

10

0.1 µF

0.040 (1.02) 0.437 (11.10) 10

40

43

—

20

7

52

68

—

60

20

—

40

—

65

5

70

—

65

35

40

—

60

—

70

10

15

—

35

30

35

30

—

10

20

70

65

75

65

68

65

70

65

70

35

45

43

45

43

45

—

70

65

75

70

65

70

60

45

60

45

60

45

—

70

65

75

70

65

70

45

70

65

70

65

60

51-709-013

SCI-3303-000*

51-709-015

¦ 1216-001

—

50

—

70

—

0.15 µF 0.032 (0.81) 0.250 (6.35) 12

0.012 µF 0.032 (0.81) 0.470 (11.94)

0.050 µF 0.032 (0.81) 0.468 (11.89) 15

70

65

75

70

65

70

45

70

65

70

65

60

/61-0009

70

—

70

—

100

200

5500 pF 0.032 (0.81) 0.250 (6.35)

5500 pF 0.032 (0.81) 0.235 (5.97)

—

¦ 1270-016*

¦ 1270-025

—

7

—

5500 pF 0.032 (0.81)

—

7

¦ 1201-066

/61-0011

5500 pF 0.032 (0.81) 0.235 (5.97)

5500 pF 0.032 (0.81) 0.250 (6.35)

7

51-714-055*

51-714-054*

51-714-053*

51-714-058*

51-714-056

¦ SCI-3313-000*

51-719-022

¦ 1201-052

/61-0010

7

/61-0007

7

—

0.025 µF 0.032 (0.81) 0.250 (6.35) 10

0.025 µF 0.032 (0.81) 0.235 (5.97)

0.10 µF 0.032 (0.81) 0.250 (6.35) 10

15

—

40

—

7

/61-0012

—

1300 pF 0.040 (1.02)

3000 pF 0.032 (0.81)

—

5

—

5

¦ 1201-054

—

3000 pF 0.032 (0.81) 0.250 (6.35)

3000 pF 0.032 (0.81) 0.235 (5.97)

3000 pF 0.032 (0.81) 0.250 (6.35)

5

51-714-001*

¦ 1270-024

—

5

51-714-003*

¦ 1270-009

—

5

/61-0001

/61-0002

/61-0005

/43-0001

/61-0006

—

200 140

3000 pF 0.032 (0.81)

1500 pF 0.032 (0.81)

—

14

27

15

—

5

51-719-053**

51-719-054*

51-714-051*

51-719-023*

51-714-052*

51-714-004*

¦ 51-719-021

€51-714-002*

¦ SCI-3323-000*

¦ 1221-001

45

70

65

70

50

60

1500 pF 0.032 (0.81) 0.250 (6.35)

3000 pF 0.032 (0.81)

—

3000 pF 0.032 (0.81) 0.235 (5.97)

5500 pF 0.032 (0.81) 0.235 (5.97)

45

60

50

60

70

65

50

45

200

300

350

500

—

5500 pF 0.040 (1.02)

—

7

—

5500 pF 0.032 (0.81) 0.250 (6.35)

0.012 µF 0.032 (0.81) 0.250 (6.35)

5500 pF 0.032 (0.81) 0.437 (11.10)

7

—

115

—

/46-0001

—

¦ 51-709-004

1201-086

—

2500 pF 0.040 (1.02)

3000 pF 0.040 (1.02)

—

12

¦ 51-719-011 €

¦

Also available through API’s authorized distributors.

€

Also available through API’s authorized European distributors/agents.

Denotes parts supplied with lead as shown in Figure 7.

Bushing housing will have 1 1/2 imperfect threads at hex to thread interface.

*

**

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP22

Resin Sealed Bolt-in Filters

5/16-24 & 5/16-32 C & Pi Circuit

.750 .031

(19.05 .79)

.562 .031

(14.27 .79)

.375

(9.53)

.437

(11.10)

.250

(6.35)

ø .057 .005

(1.45 .13)

.750 .031

(19.05 .79)

.562 .031

(14.27 .79)

.375

(9.53)

5/16–24 Unf–2A Thd.

.437

(11.10)

.250

(6.35)

.094

(2.39)

Figure 1

ø .057 .005

(1.45 .13)

.750 .031

.562 .031

.375

(9.53)

(19.05 .79)

(14.27 .79)

5/16–32 Unc–2A Thd.

.437

(11.10)

.250

(6.35)

.094

(2.39)

Figure 2

ø .057 .005

(1.45 .13)

5/16–32 Unef–2A Thd.

.220

(5.59)

Dimensions in inches (mm)

Figure 3

Rated Voltage

125°C

Minimum Insertion Loss (dB)

M15733

MIL

Number

I

Min

Cap

10

GHz

1

3

10

1

30 100 300

MHz MHz MHz

Part Number

SCI-9510-503

Fig.

Amp

CKT

DC

AC

MHz MHz MHz

GHz

—

1

100

—

25

C

0.05 µF

15

10

—

24

18

—

35

28

25

15

—

10

—

10

12

18

5

41

37

50

35

11

35

20

28

20

45

70

66

54

20

55

30

52

50

60

70

66

65

28

55

33

52

55

60

70

28

70

40

70

—

1

2

3

1

2

100

200

400

500

700

—

115

220

115

—

Pi

C

0.1 µF

70

28

70

40

70

SCI-3513-000

SCI-3523-000

SCI-3543-000

SCI-9550-102

¦ 1202-052

—

0.02 µF

6000 pF

1000 pF

3000 pF

3300 pF

0.012 µF

2000 pF

—

Pi

C

—

¦ 1202-054

/61-0003

/61-0004

—

350

115

220

—

51-702-020*

51-702-021

SCI-9550-332

SCI-3553-000

¦ 1202-005

—

Pi

—

¦

Also available through API’s authorized distributors.

Denotes parts with 5/16-24 Threads

*

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP23

Metric Resin Sealed Bolt-in Filters

M3 Pi Circuit & M4 C Circuit

0.158 ±0.008 Hex

0.197 (5.00)

(4.00 0.ꢀ2

0.060 (1.52) Max

Potting Height

2 Plcs.

0.060 (1.532 Max

Potting Height

2 Pl.

0.552 ±0.040

(14.00 1.02

0.125 ±0.008

(3.18 0.ꢀ2

0.472 (12.00)

±0.031

Mounting

Surface

0.197 (5.00)

0.158 ±0.008

1 Imperfect

(4.0 0.ꢀ2

Mounting

Surface

Thread

0.552 ±0.040

(14.00 1.02

M4 X 0.7

0.276 (7.00)

M3 X 0.5 Thread

0.630 (16.00)

±0.031

0.032 (0.802

0.354 (9.00)

±0.031

0.31 (0.80)

Dimensions in inches (mm)

Rated Voltage

125°C

I

Min

Cap

Temperature

Range

Figure

Part Number

51-831-004

Amp

CKT

DC

1

2

100

3

Pi

1000 pF

-55°C to +125°C

100

70

10

Pi

C

100 pF

-55°C to +125°C

51-831-011

51-831-012

51-831-013

51-831-014

51-831-015

54-863-004

54-863-005

54-863-007

54-863-008

54-863-010

1500 pF

3000 pF

5500 pF

12000 pF

10000 pF

100 pF

100

C

1000 pF

2000 pF

4700 pF

C

RoHS available.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP24

High Current/High Voltage

Resin Sealed Filters

High current filters are ideal for use in high current

5 volt logic buss, but also can be used for ±48 VDC

telephone rack buss, high current switch mode power

supplies and DC charging systems. High voltage filters

find use in high voltage power supplies and applications

requiring U.L. Hi-Pot.

Installation Notes

for Figure 1 & 2 — see below (Figure 3 see page CF6)

Features

1. Mounting installation torque

I

Current ratings up to 100 Amps

Method A: Mounting in full threaded through-hole

Maximum torque: 96 in-lbs

I

Continuous voltage ratings up to

1250 VDC/240 VAC (400Hz)

Method B: Mounting w/hardware

Maximum torque: 84 in-lbs

I

U.L. 1459 recognized and CSA C22.2 approved

versions available

2. Terminal installation torque

Maximum torque: 20 in-lbs

Note: Use two-wrench method to install

terminal hardware

I

Rugged bolt-in style for easy installation

1-1/2 Imperfect Thds.

.060 Max., Typ.

5/16–24 Unf–2A Thd.

.250

(6.35)

ø .062 .005

(1.58 .13)

Typ.

.250

(6.35)

Min.

.250

(6.35)

.250

(6.35)

Min.

.500

(12.7)

Hex.

.250

(6.35)

Figure 3

Dimensions in inches (mm)

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP25

High Current/High Voltage

Resin Sealed Filters

High Current High Voltage Feed-through

1.000 .031

1.250 .031

.375

(9.53)

(25.4 .79)

(31.8 .79)

.312

(7.93)

.250 Flats

ø .051 .005

(ø 1.30 .13)

.327 Max.

(8.30 Max.)

.578 Max.

(14.68 Max.)

Mounting Surface

5/16–24 Unf–2A

.689 .031

(17.5 .79)

.937 .031

(23.8 79)

.500

(12.7)

Figure 4

.325

(8.26)

ø .057 .005

(ø 1.45 .13)

.075

(1.91)

.990 .031

(25.15 .79)

.740 .031

(18.61 .79)

Mounting Surface

3/8–32unef–2A Thd.

.375

(9.53)

.500

(12.70)

Figure 5

.020

(.51)

.125

(3.18)

3/8–32 Unef–2A Thd.

Figure 6

Dimensions in inches (mm)

Rated Voltage

125°C

Minimum Insertion Loss (dB)

I

Min

Cap

10

GHz

1

3

10

1

30 100 300

MHz MHz MHz

Figure

Part Number

54-848-005*

Amp

CKT

DC

AC***

MHz MHz MHz

GHz

1

60

—

50

C

Pi

0.22 µF

20

—

3

30

—

7

40

12

20

—

10

6

50

20

25

10

22

20

15

50

30

35

20

32

30

50

33

40

28

35

50

57

28

40

35

50

2

1

3

4

5

6

60

200

600

750

1250

2500

—

140

240

—

50

0.22 µF

50

57

28

35

50

54-853-001*

54-853-004 €

54-848-008

54-844-001**

54-844-002**

54-763-008

54-763-009

54-789-003

¦ 1280-060 €

100

25

0.22 µF

4700 pF ± 20%

0.01 µF ± 20%

1000 pF

25

—

25

4000 pF

—

25

4000 pF

—

25

1500 pF

5

¦

Also available through API’s authorized distributors.

Also available through API’s authorized European distributors/agents.

Denotes parts that are UL recognized to UL 60950 and certified to CSA C22.2

Denotes parts that meet 1500 VAC Dielectric Withstanding Voltage per UL 1283 and CSA C22.2

AC Voltage to be 400Hz

€

*

**

***

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP26

Hermetically Sealed

Threaded Case Filters

This series of filters features hermetic glass seals and

high EMI filtering performance. They are excellent for

critical applications that demand high reliability in the

toughest environmental conditions and provide broad-

band high performance EMI filtering from 10 KHz to

over 10 GHz.

Features

I

MIL-F-15733 and MIL-F-28861, DSCC 84084

QPL filters available

I

Popular .375", .410" and .690" case diameters

I

Voltage ratings from 50 V to 400 VDC/240 AC, 400 Hz

I

Impervious to high moisture environments,

solvents and severe environmental conditions

I

High temperature terminal construction

I

D-slotted bushings

I

High reliability testing available

Thread length: A - 0.187 (4.76) B - 0.312 (7.92)

L

.200

(5.08)

A/B

.160

(4.064)

Max.

ø .385 Max.

(9.78)

1/4–28 Unf–2A Thd.

.050 (1.27) x .070 (1.78)

.176

(4.47)

L

Slot, both ends

Figure 1

A/B

.160

(4.064)

Max.

ø .385 Max.

(9.78)

.115 Ref.

(2.92)

#12–32 Unef–2A Thd.

.050 (1.27) x .070 (1.78)

Slot, both ends

Note: ø .410 Max. for M28861 parts

Figure 2

Dimensions in inches (mm)

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP27

Hermetically Sealed

Threaded Case Filters

.375 ø C Circuit Standard

Rated Voltage

Minimum Insertion Loss (dB)

See Pg.

MIL LP26

No for Fig.

Min

Cap

Amp µF

DCR

Max

Ohms

Max

L

85°C

125°C

I

Thd

Lgth

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Part Number

DC

80

AC

DC

AC

—

In

(mm)

KHz MHz MHz

—

1

—

50

15 1.400 0.005 0.387 (9.830)

15 2.800 0.005 0.576 (14.630)

15 4.000 0.005 0.688 (17.475)

15 0.450 0.005 0.387 (9.830)

15 0.150 0.005 0.387 (9.830)

15 0.015 0.005 0.387 (9.830)

15 0.250 0.005 0.387 (9.830)

15 0.500 0.005 0.630 (16.002)

15 0.060 0.005 0.415 (10.541)

A

15

20

26

6

28

34

40

19

6

33

39

46

25

15

—

19

28

10

44

50

55

36

26

6

60

55

42

25

50

55

38

70

50

70

¦ 54-367-008

80

—

50

—

70

55

45

65

70

55

54-370-007

54-371-001

80

50

150

200

250

400

100

150

200

400

—

54-367-005

125

240

—

7

¦ 9920-100-6002

54-367-007

—

14

20

5

30

39

18

¦ 54-367-006

54-370-006

—

9923-100-6004

.375 ø C Circuit MIL Qualified (See MIL index on pages CF9-11 for complete MIL part number listing)

Rated Voltage

Minimum Insertion Loss (dB)

M15733 See Pg.

M28861◊ LP26

Min

Cap

Amp µF

DCR

Max

Ohms

Max

L

85°C 125°C

I

Thd

Lgth

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Part Number MIL No for Fig.

DC

AC

DC

AC

—

In

(mm)

KHz MHz MHz

1

2

1

—

50

15 1.200 0.008 0.410 (10.414)

15 2.100 0.010 0.576 (14.630)

15 0.700 0.008 0.410 (10.414)

10 0.300 0.004 0.474 (12.040)

15 0.450 0.008 0.410 (10.414)

15 0.250 0.008 0.410 (10.414)

15 0.150 0.008 0.410 (10.414)

15 0.062 0.004 0.680 (17.272)

B

A

B

A

B

A

B

A

15

20

10

7

28

33

24

19

14

10

2

33

40

30

25

20

16

7

40

65

40

55

40

37

70

54-367-054 1-012

54-367-049 1-002

◊

40

50

40

35

36

31

26

17

—

50

—

70

64

70

60

56

52

55

50

54-370-032 49-0008

70

—

54-367-055 1-014

◊

100

150

200

330

—

54-370-030 34-0035

—

6

54-367-051 1-006

◊

—

6

54-367-056 1-016

—

54-367-057 1-018

125

—

54-367-053 1-010

54-367-058 1-020

◊

54-370-034 49-0010

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP28

L-C Filter LT

L-C Filter LB

Threaded

End

Hermetically Sealed

Threaded Case Filters

Threaded

End

.375 ø L Circuit

Thread length: A - 0.187 (4.76) B - 0.312 (7.92)

L

.200

(5.08)

1/4–28 Unf–2A Thd.

.200

(5.08)

A/B

.160

(4.064)

Max.

.347

(8.814)

ø .385 Max.

(9.78)

.080

ø .040 .001

(1.02 .025)

.050 (1.27) x .070 (1.78)

1/4–28 Unf–2A Thd.

(2.032)

Slot, both ends

Max.

1/4–28 Unf–2A Thd.

ø .410

(10.41)

Max.

A/B

.200

(5.08)

Figure 1

.467

(11.86)

Max.

L

Note: ø .410 Max. for

M28861 parts

Figure 2

Resin Sealed

Not Hermetically Sealed

ø .040 .001

(1.02 .025)

Typ.

L

A/B

ø .410

(10.41)

Max.

.200

(5.08)

Figure 3

1/4–28 Unf–2A Thd.

.200

(5.08)

1/4–28 Unf–2A Thd.

#16Awg,

.051 (1.30) ø

ø .040

(1.02)

A/B

ø .385

(9.78)

Max.

L

A/B

.250 .030

(6.35 0.8)

ø .385

(9.78)

Max.

.343

(8.712)

Max.

L

Figure 5

Dimensions in inches (mm)

Figure 4

.375 ø L Standard Low Profile

Rated Voltage

Minimum Insertion Loss (dB)

Min

Cap

µF

DCR

Max

Ohms CKT

Max

L

MIL

No Figure

85°C

125°C

I

Thd

Lgth

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Part Number

Amp

DC AC DC AC

In

(mm)

KHz MHz MHz

—

1

80

100

—

50

70

—

15

25

15

1.200 0.005 LB 0.370 (9.398)

1.400 0.005 LB 0.370 (9.398)

1.400 0.003 LB 0.280 (7.112)

1.400 0.005 LB 0.370 (9.398)

1.400 0.005 LB 0.325 (8.255)

1.400 0.005 LB 0.330 (8.382)

1.400 0.003 LB 0.370 (9.398)

1.400 0.003 LB 0.280 (7.112)

1.400 0.003 LB 0.370 (9.398)

2.800 0.003 LB 0.450 (11.430)

1.400 0.001 LB 0.450 (11.430)

0.700 0.005 LB 0.370 (9.398)

A

B

A

15

20

15

9

25

28

25

28

34

25

20

34

33

34

33

40

34

29

44

49

44

39

60

52

70

¦ 9051-100-0000

1

70

¦ 51-359-001 €

SCI-1021-000

¦ 9053-100-0001

¦ 51-717-001 €

51-344-006

2*

1

2*

4

1

¦ SCI-1020-000

SCI-1021-020

¦ SCI-1020-020

SCI-1150-001

9051-101-0018

¦ 9053-100-0008

◊

2 *

1

5

1

* Part is resin sealed, this is not a hermetic part.

◊ Note: 0.462" (11.73mm) length from mounting

surface to end of lead — not 0.347" (8.8mm).

¦

Also available through API’s authorized distributors.

Also available through API’s authorized European distributors/agents.

€

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP29

L-C Filter LT

L-C Filter LB

Threaded

End

Hermetically Sealed

Threaded Case Filters

Threaded

End

.375 ø L Standard Low Profile continued

Rated Voltage

Minimum Insertion Loss (dB)

See Pg.

MIL LP28

No for Fig

Min

Cap

µF

DCR

Max

Ohms CKT

Max

L

85°C

125°C

I

Thd

Lgth

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Part Number

Amp

DC AC DC AC

In

(mm)

KHz MHz MHz

—

2*

100

150

—

70

—

15

0.750 0.005 LB 0.325 (8.255)

0.500 0.005 LB 0.370 (9.398)

0.500 0.003 LB 0.450 (11.430)

1.000 0.003 LB 0.450 (11.430)

0.015 0.005 LB 0.325 (8.255)

0.012 0.005 LB 0.370 (9.398)

0.150 0.008 LB 0.325 (8.255)

0.250 0.003 LB 0.450 (11.430)

A

B

A

B

A

B

9

20

12

20

25

—

10

15

29

21

25

30

—

15

21

39

31

34

41

6

52

48

50

56

25

40

50

70

45

50

60

70

¦ 9050-100-0008

1

100

4

70

64

70

38

52

70

¦ 9053-100-0002

SCI-1250-001

€SCI-2150-000

SCI-2150-001

¦ 51-717-007

1

8

1

10

—

4

1

2*

1

250 125 200 125 15

350 125 300 125 15

300 125 300 125 15

6

¦ 51-359-007

2

25

31

9050-100-0011

€SCI-2350-000

SCI-2350-001

1

4

* Part is resin sealed, this is not a hermetic part.

(See MIL index on pages CF9-11 for complete

MIL part number listing)

.375 ø L Circuit MIL Qualified Low Profile

Rated Voltage

Minimum Insertion Loss (dB)

Max

M15733 See Pg.

M28861◊ LP28

Min

Cap

µF

DCR

Max

Ohms CKT

85°C

125°C

I

L

Thd

Lgth

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Part Number MIL No for Fig

Amp

DC AC DC AC

In

(mm)

KHz MHz MHz

38-0004

38-0005

58-0001

58-0004

49-0006

49-0007

1

3

1

4

1

—

50

—

10

15

1.400 0.008 LB 0.370 (9.398)

1.400 0.008 LB 0.545 (13.843)

A

B

A

B

A

B

A

B

15

8

28

20

24

19

14

—

33

28

30

25

20

—

44

40

38

40

36

31

6

60

40

55

40

25

40

70

60

70

¦ 51-359-021

¦ 51-359-024

¦ 51-359-051

51-359-105

¦ 51-359-044

¦ 51-359-055

51-359-081

51-359-086

¦ 51-359-053

51-359-082

51-359-083

51-359-088

51-359-084

51-359-050

51-359-085

51-359-090

80

100

—

70

64

60

56

42

52

50

1.400 0.008

LT 0.545 (13.843)

50

1.200 0.010 LB 0.370 (9.398)

1.200 0.010 LB 0.450 (11.43)

1.400 0.008 LB 0.410 (10.414)

0.680 0.010 LB 0.319 (8.103)

0.700 0.008 LB 0.410 (10.414)

0.450 0.008 LB 0.410 (10.414)

0.250 0.008 LB 0.410 (10.414)

0.150 0.008 LB 0.370 (9.398)

0.150 0.008 LB 0.410 (10.414)

50

1-001

50

◊

1-011

—

50

49-0001

100

—

50

1-003

1-005

1-015

1-007

70

10

6

◊

—

100

150

—

6

—

38-0008

—

200 125 15

1-009

—

10

16

26

◊

1-019

—

¦

Also available through API’s authorized distributors.

Also available through API’s authorized European distributors/agents.

€

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP30

L-C Filter LT

L-C Filter LB

Threaded

End

Hermetically Sealed

Threaded Case Filters

Threaded

End

.375 ø L Circuit

L

.200

(5.08)

A/B

.160

(4.064)

Max.

.200

(5.08)

L

.190 Max.

(3.81)

ø .385 Max.

(9.78)

.150

(3.81)

Max.

A/B

.050 (1.27) x .070 (1.78)

1/4–28 Unf–2A Thd.

ø .385 Max.

(9.78)

Slot, both ends

Figure 1

.115 Ref.

(2.92)

Thread length:

A - 0.187 (4.76)

B - 0.312 (7.92)

Note: ø .410 Max. for

M28861 parts

1/4–28 Unf–2A Thd.

ø .060 (1.524) Ref.

Both ends

Dimensions in inches (mm)

.375 ø L Circuit Standard Product

Rated Voltage

Minimum Insertion Loss (dB)

Min

Cap

µF

DCR

Max

Ohms CKT

Max

L

MIL

No Figure

85°C

125°C

I

Thd

Lgth

1

GHz

70

30 150

KHz KHz

100

MHz

70

300

1

10

Part Number

51-353-007

Amp

DC AC DC AC

In

(mm)

KHz MHz MHz

—

1

80

—

50

—

0.06 1.400 70.000 LB 0.770 (19.558)

0.15 1.400 12.000 LT 0.960 (24.384)

0.45 1.400 1.200 LB 0.770 (19.558)

A

44

21

16

15

70

52

31

33

28

70

64

37

44

33

70

55

70

46

44

70

60

70

51-353-095

51-353-003

1.00 1.400 0.250

5.00 1.400 0.015

LT 0.770 (19.558)

51-353-099

51-353-100

10.00 1.200 0.010 LB 0.450 (11.430)

¦ 9200-300-0025

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP31

L-C Filter LT

L-C Filter LB

Threaded

End

Hermetically Sealed

Threaded Case Filters

Threaded

End

.375 ø L Circuit Standard Product continued

Rated Voltage

Minimum Insertion Loss (dB)

See Pg.

MIL LP30

No for Fig

Min

Cap

µF

DCR

Max

L

85°C

125°C

I

Thd

Lgth

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Part Number

Amp

Ohms CKT

10.00 1.200 0.010 LB 0.450 (11.430)

DC AC DC AC

In

(mm)

KHz MHz MHz

—

1

80

—

50

—

B

A

B

A

B

A

B

A

B

15

14

15

9

28

27

20

28

17

13

12

15

23

10

8

33

36

26

34

29

20

35

21

14

44

57

37

44

50

35

30

56

41

30

26

25

60

70

68

52

70

62

50

70

64

45

70

¦ 9200-303-0095

80

10.00 1.400 0.010

LT 0.450 (11.430)

70

52

51-353-101

51-353-109

80

50

150

250

300

100

1.00 0.750 0.250 LB 0.758 (19.253)

5.00 0.450 0.015 LT 0.758 (19.253)

10.00 1.000 0.003 LB 0.450 (11.430)

LT 0.758 (19.253)

200 125 1.00 0.250 0.250 LB 0.758 (19.253)

200 125 3.00 0.250 0.050 LT 0.758 (19.253)

200 125 3.00 0.250 0.050 LB 0.758 (19.253)

51-353-120

6

9000-103-0019

SCI-2120-014

51-353-110

14

—

200 125 1.00 0.250 0.250

¦ 51-353-111

51-353-112

¦ 51-353-113

51-353-114

200 125 5.00 0.250 0.015

200 125 10.00 0.250 0.010

LT 0.758 (19.253)

LT 0.450 (11.430)

51-353-116

300 125 0.50 0.150 1.000 LB 0.758 (19.253)

300 125 1.00 0.150 0.250 LB 0.758 (19.253)

300 125 2.00 0.150 0.063 LB 0.758 (19.253)

300 125 3.00 0.150 0.027 LB 0.758 (19.253)

300 125 10.00 0.150 0.003 LB 0.450 (11.430)

SCI-2320-010

SCI-2320-004

SCI-2320-005

SCI-2320-006

SCI-2320-007

SCI-2320-014

8

(See MIL index on pages CF9-11 for

complete MIL part number listing)

.375 ø L Circuit MIL Qualified Profile

Rated Voltage

Minimum Insertion Loss (dB)

M15733 See Pg.

Min

Cap

µF

DCR

Max

Ohms CKT

Max

L

MIL

No

LP30

for Fig

85°C

125°C

I

Thd

Lgth

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Part Number

51-390-018

Amp

DC AC DC AC

In

(mm)

KHz MHz MHz

23-0026

23-0038

23-0050

24-0006

34-0007

58-0002

24-0005

39-0014

24-0008

38-0002

38-0006

25-0003

25-0005

25-0008

39-0008

25-0017

1

—

80

—

80

—

80

—

50

—

0.50 1.400 0.360 LB 0.630 (16.002)

1.00 1.400 0.140 LB 0.630 (16.002)

2.00 1.400 0.070 LB 0.630 (16.002)

10.00 1.400 0.010 LB 0.760 (19.304)

A

B

A

B

A

B

A

B

12

11

10

15

14

15

6

36

26

24

28

23

17

20

17

48

36

32

31

33

31

34

31

33

34

23

26

23

69

55

48

42

44

42

44

42

44

55

35

70

56

60

56

52

56

64

70

69

60

69

70

60

70

51-390-026

51-390-034

¦ 51-353-067

51-353-207

51-444-072

¦ 51-353-066

51-353-287

¦ 51-444-060

¦ 51-343-028

¦ 51-343-034

51-353-053

¦ 51-353-054

¦ 51-353-055

51-353-155

51-444-039

50

10.00 1.400 0.008

LT 0.545 (13.843)

50

10.00 1.400 0.010 LB 0.760 (19.304)

50

10.00 1.400 0.003

10.00 1.400 0.010

LT 0.760 (19.304)

LT 0.740 (18.796)

50

15.00 1.400 0.008 LB 0.481 (12.217)

1.00 0.450 0.250 LB 0.738 (18.745)

50

100

5.00 0.450 0.015

LT 0.758 (19.253)

6

5.00 0.450 0.015 LB 0.738 (18.745)

5.00 0.450 0.015 LB 0.760 (19.304)

6

5.00 0.450 0.015

LT 0.758 (19.253)

6

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP32

L-C Filter LT

L-C Filter LB

Threaded

End

Hermetically Sealed

Threaded Case Filters

Threaded

End

(See MIL index on pages CF9-11 for

complete MIL part number listing)

.375 ø L Circuit MIL Qualified Profile continued

Rated Voltage

Minimum Insertion Loss (dB)

M15733 See Pg.

Min

Cap

µF

DCR

Max

Ohms CKT

Max

L

MIL

No

LP30

for Fig

85°C

125°C

I

Thd

Lgth

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Part Number

51-444-040

Amp

DC AC DC AC

In

(mm)

KHz MHz MHz

25-0020

39-0009

39-0010

26-0001

26-0003

26-0013

26-0015

23-0058

23-0057

34-0015

26-0004

26-0006

26-0018

26-0019

26-0007

26-0010

34-0030

54-0018

1

2

—

100

5.00 0.450 0.015 LB 0.738 (18.745)

10.00 0.450 0.003 LT 0.760 (19.304)

10.00 0.450 0.003 LB 0.760 (19.304)

LT 0.758 (19.253)

150 125 1.00 0.250 0.250 LB 0.738 (18.745)

150 125 1.00 0.250 0.250 LT 0.758 (19.253)

150 125 1.00 0.250 0.250 LB 0.738 (18.745)

B

A

B

A

B

A

B

A

6

17

20

13

15

8

23

26

24

23

15

14

21

35

45

38

30

25

32

41

69

56

80

60

68

58

60

70

60

70

6

60

70

51-353-156

51-353-157

¦ 51-353-076

¦ 51-353-077

51-444-043

51-444-044

51-390-040

51-390-039

51-444-005

¦ 51-353-078

¦ 51-353-079

¦ 51-444-046

51-444-047

¦ 51-353-080

51-353-081

51-444-027

51-444-117

6

150 125 1.00 0.250 0.250

—

3

150

2.00 0.250 0.070

LT 0.630 (16.002)

LT 0.758 (19.253)

3

150 125 3.00 0.150 0.050

150 125 3.00 0.250 0.050

—

2

8

150 125 3.00 0.250 0.050 LB 0.738 (18.745)

8

150 125 5.00 0.250 0.015

LT 0.758 (19.253)

8

150 125 5.00 0.250 0.015 LB 0.738 (18.745)

200 125 5.00 0.250 0.150 LB 0.900 (22.860)

300 125 1.00 0.150 0.250 LB 0.740 (18.796)

8

15

10

—

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP33

Hermetically Sealed

Threaded Case Filters

.375 ø Pi Circuit

Thread length: A - 0.187 (4.76) B - 0.312 (7.92)

.200

(5.08)

L

A/B

.160

(4.064)

Max.

ø .385 Max.

(9.779)

.115 Ref.

(2.921)

A/B

L

.200

(5.08)

Max.

.150

(3.81)

Max.

.050 (1.27) x .070 (1.78)

1/4–28 Unf–2A Thd.

Slot, both ends

Figure 1

ø .385 Max.

(9.779)

.062 (1.52) ø Hole

Both ends

1/4–28 Unf–2A Thd.

.115 Ref.

(2.92)

Figure 2

Dimensions in inches (mm)

.375 ø Pi Circuit Standard Product

Rated Voltage

Minimum Insertion Loss (dB)

Min

Cap

µF

DCR

Max

Ohms

Max

L

MIL

No

85°C

125°C

I

Thd

Lgth

1

GHz

70

30 150

KHz KHz

100

MHz

70

300

1

10

Figure

Part Number

SCI-2030-010

Amp

DC

80

AC

DC

AC

—

In

(mm)

KHz MHz MHz

—

2

—

50

0.50 1.500 1.000 0.758 (19.253)

1.00 1.500 0.250 0.758 (19.253)

2.00 1.500 0.063 0.758 (19.253)

3.00 1.500 0.027 0.758 (19.253)

5.00 2.800 0.015 0.758 (19.253)

10.0 2.800 0.005 0.758 (19.253)

0.25 1.000 4.000 0.758 (19.253)

0.50 1.000 0.600 0.758 (19.253)

1.00 1.000 0.250 0.758 (19.253)

3.00 1.000 0.060 0.758 (19.253)

5.00 1.000 0.015 0.758 (19.253)

10.0 1.000 0.003 0.758 (19.253)

10.0 1.000 0.005 0.758 (19.253)

B

A

B

A

B

A

B

A

B

A

24

15

—

21

28

—

6

66

54

45

35

18

32

70

51

39

41

28

16

—

24

20

—

50

40

18

14

70

62

55

60

40

70

69

68

60

59

41

28

29

40

20

12

66

56

33

20

70

35

70

65

40

70

55

50

70

63

30

70

68

70

2

1

80

—

50

—

70

80

70

SCI-2030-004

SCI-2030-005

SCI-2030-006

SCI-2030-013

¦ 9001-100-1080

¦ 9001-100-1081

SCI-2130-009

51-311-319

80

50

80

—

50

80

—

50

80

—

50

80

—

50

150

250

300

—

100

200

300

—

¦ 9001-100-1010

51-311-320

—

9

—

¦ 9001-100-1013

51-311-321

—

¦ 51-311-322

SCI-2130-007

SCI-2130-014

51-311-316

—

9

125

125 1.00 0.300 0.250 0.758 (19.253)

125 3.00 0.300 0.050 0.758 (19.253)

125 5.00 0.300 0.015 0.758 (19.253)

125 0.25 0.300 4.000 0.758 (19.253)

125 0.50 0.300 1.000 0.758 (19.253)

125 2.00 0.300 0.063 0.758 (19.253)

125 10.0 0.300 0.003 0.758 (19.253)

—

8

51-311-317

¦ 9001-100-1025

SCI-2330-009

SCI-2330-010

SCI-2330-012

SCI-2330-007

—

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP34

Hermetically Sealed

Threaded Case Filters

(See MIL index on pages CF9-11 for

complete MIL part number listing)

.375 ø Pi Circuit MIL Qualified Product

Rated Voltage

Minimum Insertion Loss (dB)

Thd

See Pg.

M15733 LP33

Part Number MIL No for Fig.

Min

Cap

Amp µF

DCR

Max

Ohms

Max

L

85°C

125°C

I

1

GHz

30 150

100

MHz

80

300

1

10

Lgth

DC

AC

DC

AC

—

In

(mm)

KHz KHz

KHz MHz MHz

23-0017

23-0042

23-0054

23-0053

25-0010

25-0002

25-0004

25-0006

39-0011

39-0012

26-0011

23-0036

23-0035

26-0002

23-0047

26-0005

54-0005

1

2

—

50

0.30 2.800 0.770 0.730 (18.542)

1.00 2.800 0.140 0.730 (18.542)

2.00 1.500 0.070 0.730 (18.542)

0.25 0.900 1.500 0.793 (20.142)

1.00 0.500 0.250 0.793 (20.142)

3.00 0.660 0.050 0.793 (20.142)

5.00 0.900 0.015 0.793 (20.142)

10.0 0.990 0.003 0.760 (19.304)

B

29

73

52

46

48

33

17

—

24

29

48

11

32

5

80

71

65

66

52

34

17

29

47

66

32

51

6

80

70

80

70

80

70

80

70

80

70

51-390-305

51-390-314

¦ 51-390-318

¦ 51-390-317

51-311-311

¦ 51-311-308

¦ 51-311-309

¦ 51-311-310

51-353-344

51-353-345

¦ 51-311-314

51-390-312

51-390-311

¦ 51-353-336

51-390-315

51-311-312

51-311-408

80

68

57

40

70

63

70

47

70

—

50

—

A

B

A

B

A

B

A

8

80

70

80

70

80

70

80

70

50

—

9

50

100

150

300

9

125 0.25 0.300 1.500 0.793 (20.142)

—

0.50 0.500 0.360 0.730 (18.542)

125 1.00 0.300 0.250 0.793 (20.142)

1.00 0.500 0.140 0.730 (18.542)

—

125 3.00 0.300 0.050 0.793 (20.142)

115 1.00 0.300 0.250 0.761 (19.329)

23

43

¦

Also available through API’s authorized distributors.

Transient Suppression Pi Filters

Transient Suppressor*

VR* BV* IT* IPP*

(VDC) (VDC) (MA) (A)

6.5 7.22/7.98 10 44.7 1.179 (29.947)

Minimum Insertion Loss (dB)

100

See Pg. Rated

LP33 Volt.

for Fig. VDC

Max

Thd

Lgth

Min

Cap

DCR

Min

Max

RDC

Length

In

(mm)

1

I

Part

Number

30

KHz

23

300

1

10

GHz

Amp

µF Mohms Ohms

MHz

KHz MHz MHz

1

5

A

57

47

23

17

26

57

47

23

17

26

57

47

23

17

26

70

40

70

40

70

40

70

51-570-300

51-570-301

51-570-302

51-570-303

51-570-304

51-570-310

51-570-311

51-570-312

51-570-313

51-570-314

51-570-320

51-570-321

51-570-322

51-570-323

51-570-324

0.50 1.400 0.500 0.600

1.00 1.400 0.500 0.350

3.00 1.400 0.500 0.060

5.00 1.400 0.500 0.015

10.00 1.400 0.500 0.005

0.50 1.400 30.000 0.600

1.00 1.400 30.000 0.350

3.00 1.400 30.000 0.060

5.00 1.400 30.000 0.015

10.00 1.400 30.000 0.005

0.50 1.400 50.000 0.600

1.00 1.400 50.000 0.350

3.00 1.400 50.000 0.060

5.00 1.400 50.000 0.015

10.00 1.400 50.000 0.005

70

58

48

35

70

58

48

35

70

58

48

35

5

3

70

60

70

60

70

60

5

—

16

23

3

5

28

50

33.0 36.7/40.6

58.0 64.4/71.2

1

9.4 1.179 (29.947)

5.3 1.179 (29.947)

—

16

23

3

—

16

*

Transient Suppression definitions and ratings

VR = Reverse standoff voltage

BV = Breakdown voltage

IPP = Max. peak pulse current

IT = Test current

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP35

Hermetically Sealed

Threaded Case Filters

.375 ø T Circuit

Thread length: A - 0.187 (4.76) B - 0.312 (7.92)

L

.200

(5.08)

A/B

.160

(4.064)

Max.

ø .385 Max.

(9.78)

.115 Ref.

(2.92)

.050 (1.27) x .070 (1.78)

Slot, both ends

1/4–28 Unf–2A Thd.

Figure 1

Dimensions in inches (mm)

Note: Max. O.D. is ø .416" for Military QPL Filters.

.375 ø T Circuit Standard Product

Rated Voltage

Minimum Insertion Loss (dB)

Min

Cap

µF

DCR

Max

Ohms

Max

L

MIL

No

85°C 125°C

I

Thd

Lgth

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Figure

Part Number

SCI-2040-012

Amp

DC

AC

DC

AC

In

(mm)

KHz MHz MHz

—

1

80

—

50

—

2.00 1.400 0.126 1.071 (27.203)

3.00 1.400 0.054 1.071 (27.203)

15.0 1.400 0.005 1.179 (29.947)

1.00 0.500 0.500 1.070 (27.178)

3.00 0.500 0.054 1.071 (27.203)

10.0 0.500 0.010 1.071 (27.203)

B

A

B

A

B

8

22

27

25

19

57

13

8

30

28

34

40

24

70

29

14

55

43

44

70

39

34

70

59

29

24

70

60

70

57

70

47

70

1

80

—

50

—

8

70

SCI-2040-013

¦ 9004-100-2017

SCI-2140-004

SCI-2140-006

SCI-2140-007

SCI-2340-009

SCI-2340-004

SCI-2340-013

SCI-2340-014

80

50

17

4

150

300

100

300

4

125 0.25 0.150 8.000 1.071 (27.203)

125 1.00 0.150 0.500 1.071 (27.203)

125 3.00 0.150 0.054 1.071 (27.203)

125 10.0 0.150 0.010 1.071 (27.203)

11

—

8

¦

Also available through API’s authorized distributors.

(See MIL index on pages CF9-11 for complete

MIL part number listing)

.375 ø T Circuit MIL Qualified Product

Rated Voltage

Minimum Insertion Loss (dB)

Max

M15733

MIL

No

25-0024

25-0007

26-0012

26-0008

Min

Cap

Amp µF

DCR

Max

Ohms

85°C

125°C

I

L

Thd

Lgth

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Part Number

51-382-609

Figure

1

DC

AC

DC

AC

—

In

(mm)

KHz MHz MHz

—

100

150

2.00 0.750 0.100 1.179 (29.947)

B

A

10

—

22

13

11

31

28

21

18

80

70

55

43

33

1

—

4.00 0.750 0.063 1.345 (34.163)

70

51-382-603

¦ 51-351-604

51-351-603

125 2.00 0.250 0.100 1.179 (29.947)

125 4.00 0.250 0.063 1.345 (34.163)

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP36

Hermetically Sealed

Threaded Case Filters

.375 ø TT Circuit Standard Product

Rated Voltage

Minimum Insertion Loss (dB)

See Pg.

MIL LP35

No for Fig.

Min

Cap

Amp µF

DCR

Max

Ohms

Max

L

85°C

125°C

I

Thd

Lgth

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Part Number

SCI-2060-009

DC

AC

DC

AC

—

In

(mm)

KHz MHz MHz

—

1

—

50

0.25 1.500 12.000 1.241 (31.521)

3.00 1.500 0.081 1.241 (31.521)

10.0 1.500 0.006 1.241 (31.521)

1.00 1.500 0.750 1.241 (31.521)

2.00 1.500 0.189 1.241 (31.521)

3.00 1.500 0.081 1.241 (31.521)

10.0 1.400 0.006 1.241 (31.521)

B

A

B

A

B

70

—

15

12

—

12

—

5

70

33

29

52

33

24

25

48

12

18

70

54

35

70

56

54

32

70

38

24

70

55

70

55

70

55

70

42

70

42

70

34

—

50

—

70

SCI-2060-013

SCI-2060-007

SCI-2060-014

SCI-2160-011

SCI-2160-012

SCI-2160-013

SCI-2160-014

SCI-2360-011

SCI-2360-006

SCI-2360-007

SCI-2360-014

50

100

300

125 1.00 0.500 0.750 1.241 (31.521)

125 3.00 0.500 0.080 1.241 (31.521)

125 10.0 0.500 0.006 1.241 (31.521)

5

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP37

Hermetically Sealed

Threaded Case Filters

.690 ø C Circuit

L

.560 Max.

(14.22)

.250

(6.35)

.312

(7.92)

ø .687 .015

(17.45 .38)

L

.735 Max.

(18.62)

.250

(6.35)

5/16–24 Unf–2A Thd.

.115 .005

(2.92 .127)

.312

(7.92)

.062 (1.57) x .125 (3.17)

Slot, both ends

Figure 1

ø .687 .015

(17.45 .38)

.093 (2.36)

ø Hole, both ends

5/16–24 Unf–2A Thd.

Figure 2

Dimensions in inches (mm)

.690 ø C Circuit Standard Product

Rated Voltage

Minimum Insertion Loss (dB)

Min

Cap

µF

DCR

Max

Ohms

Max

L

MIL

No

85°C

125°C

I

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Figure

Part Number

Amp

DC

AC

DC

AC

In

(mm)

KHz MHz MHz

—

1

200

300

250

450

—

150

300

200

400

15 2.600 0.005

15 0.500 0.005

25 0.500 0.005

15 0.250 0.005

0.702

0.560

0.750

0.560

(17.831)

(14.224)

(19.050)

(14.224)

10

29

19

14

39

25

19

50

36

30

60

50

45

50

70

¦ 9932-100-6004

1

2

1

—

125

240

6

70

60

70

54-310-001

54-310-005

6

240

—

54-310-009

¦ 9932-100-6005

.690 ø C Circuit MIL Qualified Product

Rated Voltage

Minimum Insertion Loss (dB)

M15733

MIL

No

Min

Cap

µF

DCR

Max

Ohms

Max

L

85°C

125°C

I

1

GHz

30 150

100

300

KHz MHz MHz

21 31 51

1

10

Figure

Part Number

54-310-039

Amp

DC

AC

DC

AC

In

(mm)

KHz KHz

MHz

—

1

275

125

15 0.200 0.005

0.575

(14.605)

5

15

70

34-0037

.690 ø C Circuit DSCC 84084 Product

Rated Voltage

Minimum Insertion Loss (dB)

Min

Cap

µF

DCR

Max

Ohms

Max

L

84084

No

85°C

125°C

I

1

GHz

30 150

100

300

KHz MHz MHz

16 26 40

1

10

Figure

Part Number

54-310-042

Amp

DC

AC

DC

AC

In

(mm)

KHz KHz

MHz

—

-001

1

400

230

15 0.150 0.005

0.700

(17.780)

—

10

52

70

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP38

Hermetically Sealed

Threaded Case Filters

.690 ø L Circuit

L

.560 Max.

(14.22)

.250

(6.35)

.312

(7.92)

ø .687 .015

(17.45 .38)

5/16–24 Unf–2A Thd.

.115 .005

(2.92 .127)

L

.735 Max.

.250

(6.35)

(18.62)

.062 (1.57) x .125 (3.17)

Slot, both ends

.312

(7.92)

Figure 1

ø .687 .015

(17.45 .38)

.093 (2.36)

ø Hole, both ends

5/16–24 Unf–2A Thd.

Figure 2

Dimensions in inches (mm)

.690 ø L Circuit Standard Product

Rated Voltage

Minimum Insertion Loss (dB)

Min

DCR

Max

MIL

No

85°C

125°C

I

Cap

µF

Max

Ohms CKT

10.0 1.400 0.005 LT 0.905 (22.987) 16

10.0 2.600 0.006 LB 0.959 (24.359) 18

20.0 2.600 0.001 LB 0.905 (22.987) 18

L

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Figure

Part Number

9010-100-0049

Amp

DC

AC

DC

AC

In

(mm)

KHz MHz MHz

—

1

150

250

450

300

—

100

200

400

300

—

24

32

19

30

21

19

12

19

17

10

14

24

34

39

25

38

33

25

18

25

23

16

32

35

44

49

35

60

55

45

30

35

34

29

52

56

60

70

60

50

70

60

48

45

70

1

2

1

—

70

62

60

70

SCI-6120-008

SCI-6120-009

51-320-041

—

125 10.0 0.500 0.008 LT 0.905 (22.987)

240 1.00 0.360 0.210 LT 0.905 (22.987)

240 1.00 0.250 0.210 LT 0.905 (22.987)

240 3.00 0.360 0.030 LT 0.905 (22.987)

240 5.00 0.360 0.010 LB 0.905 (22.987)

240 15.0 0.360 0.007 LB 0.650 (16.510)

240 25.0 0.360 0.007 LT 0.750 (19.050)

240 25.0 0.250 0.007 LB 0.750 (19.050)

240 1.00 0.150 0.250 LT 0.905 (22.987)

5

240

—

51-320-024

—

5

51-320-100

¦ 51-320-026

51-320-103

—

5

51-322-007

5

51-322-015

—

6

51-322-036

9010-100-0054

SCI-6320-004

125 1.00 0.400 0.300 LB 0.959 (24.359

)

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP39

L-C Filter LT

L-C Filter LB

Threaded

End

Hermetically Sealed

Threaded Case Filters

Threaded

End

(See MIL index on pages CF9-11 for complete

MIL part number listing)

.690 ø L Circuit MIL Qualified Product

Rated Voltage

Minimum Insertion Loss (dB)

Max

M15733 See Pg.

Min

Cap

Amp µF

DCR

Max

Ohms CKT

MIL

No

LP38

for Fig.

85°C

125°C

I

L

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Part Number

DC

AC

DC

AC

In

(mm)

KHz MHz MHz

27-0005

27-0008

27-0009

27-0011

27-0012

27-0014

34-0002

1

2

—

200

125 3.00 0.250 0.033

125 5.00 0.250 0.016

125 10.0 0.250 0.005

125 15.0 0.250 0.007

125 20.0 0.360 0.050

LT 0.900 (22.860)

LB 0.900 (22.860)

LT 1.031 (26.187)

LB 1.031 (26.187)

LT 1.763 (44.780)

LB 1.763 (44.780)

—

14

13

19

21

19

25

80

69

61

60

57

70

¦ 51-320-015

39

32

30

36

35

—

200

70

51-320-017

51-320-018

51-323-003

51-323-004

¦ 51-322-009

51-322-017

.690 ø L Circuit DSCC 84084 Product

Rated Voltage

Minimum Insertion Loss (dB)

See Pg.

84084 LP38

Min

Cap

Amp µF

DCR

Max

Ohms CKT

Max

L

85°C

125°C

I

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Part Number

51-320-162

No

-004

for Fig.

DC

AC

DC

AC

In

(mm)

KHz MHz MHz

1

—

400

230 1.00 0.150 0.150

230 3.00 0.150 0.026

230 5.00 0.150 0.013

230 10.0 0.150 0.008

LT 0.905 (22.987)

LB 0.905 (22.987)

LT 0.905 (22.987)

LB 0.905 (22.987)

LT 0.905 (22.987)

LB 0.905 (22.987)

LT 0.905 (22.987)

LB 0.905 (22.987)

—

19

11

10

30

19

16

60

54

48

70

46

36

28

25

-005

-006

-007

-008

-009

-010

-011

1

—

400

70

51-320-163

51-320-164

51-320-165

51-320-166

51-320-167

51-320-168

51-320-169

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP40

Hermetically Sealed

Threaded Case Filters

.690 ø Pi Circuit

L

.560 Max.

(14.22)

.250

(6.35)

.312

(7.92)

L

.555 Max.

(14.10)

.250

(6.35)

ø .687 .015

(17.45 .38)

.312

(7.92)

.115 .005

(2.921 .127)

ø .687 .015

(17.45 .38)

5/16–24 Unf–2A Thd.

.062 (1.57) x .125 (3.18)

.140 Max.

(3.56)

Slot, both ends

Figure 1

.062 (1.57) x .125 (3.18)

5/16–24 Unf–2A Thd.

Slot, both ends

Figure 2

Dimensions in inches (mm)

.690 ø Pi Circuit Standard Product

Rated Voltage

Minimum Insertion Loss (dB)

Min

Cap

µF

DCR

Max

Ohms

Max

L

MIL

No

85°C

125°C

I

1

GHz

70

30 150

KHz KHz

100

MHz

70

300

1

10

Figure

Part Number

51-321-322

Amp

DC

AC

DC

AC

—

In

1.195

(mm)

KHz MHz MHz

—

1

150

450

—

100

400

1.00 2.800 0.210

(30.353)

35

23

—

69

31

53

31

11

70

35

70

51

30

70

35

70

65

70

1

—

20.0 5.200 0.001

1.195

(30.353)

70

SCI-6130-009

51-321-317

240

*240 1.00 0.720 0.400

*240 3.00 0.720 0.030

*240 5.00 0.720 0.020

¦51-321-318

¦51-321-319

* 0-60 Hz

(See MIL index on pages CF8-10 for com-

plete MIL part number listing)

.690 ø Pi Circuit MIL Qualified Product

Rated Voltage

Minimum Insertion Loss (dB)

Max

M15733

MIL

No

27-0004

27-0003

27-0010

27-0013

34-0005

Min

Cap

µF

DCR

Max

Ohms

85°C

125°C

I

L

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Figure

Part Number

51-321-312

Amp

DC

AC

DC

AC

In

1.195

(mm)

(30.353)

KHz MHz MHz

1

—

200

125 1.00 0.500 0.250

125 1.00 0.500 0.270

125 5.00 0.500 0.024

125 10.0 0.500 0.008

125 10.0 0.500 0.075

—

47

43

10

16

65

61

28

18

80

64

48

80

70

1

—

200

1.031

1.195

(26.187)

(30.353)

70

51-323-313

51-321-313

¦ 51-321-314

51-321-329

.690 ø Pi Circuit DSCC 84084 Product

Rated Voltage

Minimum Insertion Loss (dB)

Min

Cap

µF

DCR

Max

Ohms

Max

L

84084

No

85°C

125°C

I

1

GHz

30 150

KHz KHz

100

MHz

80

300

1

10

Figure

Part Number

51-321-398

Amp

DC

AC

DC

AC

In

1.200

(mm)

KHz MHz MHz

-013

-014

-015

-016

2

—

400

230 1.00 0.200 0.150

230 3.00 0.200 0.026

230 5.00 0.200 0.013

230 10.0 0.200 0.008

(30.480)

—

27

—

46

30

12

—

74

60

50

30

80

2

—

400

1.200

80

51-321-399

51-321-400

51-321-401

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP41

Hermetically Sealed

Threaded Case Filters

.690 ø T Circuit

.560 Max.

(14.22)

.250

(6.35)

L

.312

(7.92)

ø .687 .015

(17.45 0.38)

.115 .005

(2.92 .127)

.591 Max.

(15.01)

5/16–24 Unf–2A Thd.

.062 (1.57) x .125 (3.18)

.250

(6.35)

L

Slot, both ends

.312

(7.92)

Figure 1

ø .680 Max.

(17.272)

.125 Ref.

(3.175)

5/16–24 Unf–2A Thd.

.062 (1.57) x .125 (3.18)

Slot, both ends

Figure 2

Dimensions in inches (mm)

.690 ø T Circuit Standard Product

Rated Voltage

Minimum Insertion Loss (dB)

Min

Cap

µF

DCR

Max

Ohms

Max

L

MIL

No

85°C

125°C

I

1

GHz

30 150

KHz KHz

100

MHz

70

300

1

10

Figure

Part Number

SCI-6140-004

Amp

DC

AC

DC

AC

—

In

(mm)

KHz MHz MHz

—

1

150

250

450

—

100

200

400

1.00 2.600 0.600

3.00 2.600 0.100

5.00 2.600 0.060

20.0 2.600 0.002

1.195

(30.353)

23

21

—

7

54

35

34

35

24

43

70

46

41

38

60

70

58

50

65

70

60

70

1

—

(30.353)

70

SCI-6140-006

SCI-6140-007

SCI-6140-009

51-321-649

—

125

240

125 2.00 0.360 0.090

240 1.00 0.360 0.600

¦ 51-321-610

(See MIL index on pages CF8-10 for

complete MIL part number listing)

.690 ø T Circuit MIL Qualified Product

Rated Voltage

Minimum Insertion Loss (dB)

M15733

MIL

No

27-0017

27-0018

54-0017

Min

Cap

µF

DCR

Max

Ohms

Max

L

85°C

125°C

I

1

GHz

70

60

30 150 300

KHz KHz KHz

100

MHz

70

1

10

Figure

Part Number

51-321-607

Amp

DC

AC

DC

AC

In

1.195

(mm)

MHz MHz

1

—

200

125 1.50 0.250 0.133

125 4.00 0.250 0.025

115 10.0 0.500 0.006

(30.353)

(29.896)

—

5

19

14

20

32

21

23

62

36

35

70

60

1

2

—

200

300

1.195

1.177

70

51-321-608

51-321-670

¦

Also available through API’s authorized distributors.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP42

Value-Added

Low Pass Filter Assemblies

API Technologies’ Spectrum Control line of value-added low

pass filters provide flexible solutions to meet your unique

design challenges. Our manufacturing process allows you to

add connectors, modify terminations or add wire harnesses

without adding much cost or drastically increasing lead times.

Incorporate specific terminations, connectors or

wire harnesses to accommodate your application.

For custom requirements and exceptional needs,

contact our design/manufacturing team.

Lower the cost of acquisition and assembly.

Reduce production operations and lead times.

Our value-added services:

• Allow you to stream-line your bill of materials.

• Reduce inventory/production costs.

• Offer custom application-specific low pass filter assemblies.

Build-to-order low pass filters.

API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com

API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58

LP43


型号：	51-703-013
厂家：	API Technologies Corp
描述：	Low Pass EMI Filters
文件：	总43页 (文件大小：3169K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

51-703-013 [APITECH]

相关型号：

51-704-002

51-707-002

51-707-006

51-707-007

51-707-026

51-709-015

51-710

51-712-014

51-712-067

51-713-002

51-713-010

51-713-095