7005A-11 [APITECH]
RF Connector, Male, Cable Mount,;
| 型号： | 7005A-11 |
| 厂家： | 
API Technologies Corp |
| 描述： | RF Connector, Male, Cable Mount, |
| 文件： | 总5页 (文件大小：400K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Models 7004 & 7005
PLANAR CROWN® UNIVERSAL CONNECTOR SYSTEM
dc to 40.0 GHz
SMA; Type N; TNC; GPC-7; 3.5mm; 2.92mm; 2.4mm
RoHS
ꢀ
Axial Isolation of the Center Contact - Any excessive
axial force on the Crown center contact is absorbed by the
spring biasing at the Planar interface end.
Features
The use of PLANAR CROWN® connectors on instruments,
cables, components/accessories offers the manufacturer
and user the following benefits.
Standardized Mounting Holes - All instrument panels
can be fabricated with a standard 3/8" Dia. D-hole inde-
pendent of the front panel connector type/sex. This
eliminates changes in sheet metal design when different
connector options are requested.
Reduced Downtime - Damaged connectors can be
replaced in seconds without any tools. Repair cost is mini-
mized to that of a single connector. Recalibration, in most
applications, is virtually eliminated due to closely matched
phase, mechanical dimensions and insertion loss of the
replaceable PLANAR CROWN® assemblies.
Description
The PLANAR CROWN® UNIVERSAL CONNECTOR SYSTEM is
comprised of two connector halves/subassemblies which
have a common mating interface referred to as the
PLANAR INTERFACE. The first connector half is called the
PLANAR BULKHEAD which readily mounts into instrument
front panels, components and cables. One end of this
bulkhead has a 2.92mm (SMK) male/female primary con-
nector. The other end has a combination of grooves,
external threads and a coaxial PLANAR INTERFACE with a
2.92mm (SMK) airline geometry. The bulkhead operates
mode free beyond 40 GHz. The second connector half,
called the PLANAR CROWN®, has a similar 2.92mm PLANAR
INTERFACE on one end, with spring biased inner and outer
contacts. It has corresponding projections which interlock
with slots on the bulkhead and a coupling nut which
secures the two connector halves, resulting in a non-rota-
tional, torque independent electrical connection. The
spring biased inner and outer contacts eliminate the need
for specifying proof torque and no tools are required to
mate or unmate or break the connection. The primary end
of the PLANAR CROWN® is offered in a variety of primary
coaxial connector configurations such as SMA, Type N,
GPC-7, TNC, 3.5mm, 2.92mm (SMK) and 2.4mm (under
development), thus providing an extremely versatile con-
nector system wherein a connector can be replaced in a
matter of seconds.
Versatility - Ability to select different connector types adds
versatility to instruments, cables, systems and accessories.
It offers the end user multiple connector options. Connector
type and sex can be readily interchanged as dictated by the
system/DUT, eliminating the need for adapters.
Superior Electrical Performance than would be obtained
by additional adapters.
Simplified Network and Power Measurements on
non-insertable devices.
Non-rotational Interface - Since the PLANAR INTERFACE has
interlocking teeth, it eliminates unthreading of the connec-
tion when the Crown is subjected to a rotational torque. This
feature is especially useful on coaxial cables where one end
unthreads so easily when the cable is subjected to twisting
or flexing.
Torque Independent Connection - A torque wrench is not
required when mating the Crown to the bulkhead. A
reasonable hand tightening of the coupling nut results in an
excellent RF connection. This is achieved by having spring
biased inner and outer contacts in the Crown connectors.
Spring biasing ensures an intimate electrical contact at the
PLANAR INTERFACE. A pilot diameter on the bulkhead
guarantees excellent concentricity.
EXPRESS Shipment available via 800-542-4457
or www.argosysales.com. Check with distributor
for current product stocking quantities.
227
Revision Date: 3/10/09
Connector Systems
Specifications
PLANAR CROWN CONNECTORS
EXPRESS
www.argosysales.com
800-542-4457
PLANAR BULKHEAD CONNECTORS
U.S. Patent No. 4,836,801
(Other U.S. and Foreign Patents pending)
NOTES: 1. All dimensions are given in mm (inches) and are nominal, unless otherwise specified.
®
2. K is a registered trademark of the Wiltron 2.92mm connector
3. Unit available with RoHS compliant materials, specify when ordering.
228
5305 Spectrum Drive, Frederick, MD 21703-7362 ꢀ TEL: 301-846-9222, 800-638-2048 ꢀ Fax: 301-846-9116
web: www.aeroflex.com/weinschel ꢀ email: weinschel-sales@aeroflex.com
Revision Date: 3/10/09
Connector Systems
PLANAR BULKHEAD Connectors . . . dc to 40.0 GHz
Model Number/
Primary Conn.
Frequency
Range (GHz)
SWR*
(maximum)
Insertion Loss *
(dB maximum)
Electrical
Length
)7004A-1
dc - 40
dc - 40
----
----
----
19.9 + 0.25mm
21.6 + 0.25mm
19.9 + 0.25mm
2.92mm Female
)7004A-2
2.92mm Male
----
7010-1
2.92mm Female
with dc Block
dc - 26.5
1.20-1.25
0.6-0.9
7010-2
2.92mm Male
with dc Block
dc - 26.5
1.20-1.25
0.6-0.9
21.6 + 0.25mm
PLANAR CROWN Connectors . . . dc to 40.0 GHz
Model Number/
Primary Conn.
Frequency
Range (GHz)
SWR*
(maximum)
Insertion Loss *
(dB maximum)
Electrical
Length
7005A-1
dc - 26.5
dc - 26.5
dc - 18
dc - 18
dc - 18
dc - 34
1.20 (dc -18 GHz)
0.25 (dc -18 GHz)
18.6 + 0.25mm
18.6 + 0.25mm
18.6 + 0.25mm
28.6 + 0.25mm
34.8 + 0.25mm
SMA Female
1.25 (18 - 26.5 GHz) 0.35 (18 - 26.5 GHz)
7005A-2
SMA Male
1.20 (dc -18 GHz)
1.25 (18 - 26.5 GHz) 0.35 (18 - 26.5 GHz)
0.25 (dc -18 GHz)
)7005A-3
Type N Female
1.20
1.20
0.25
0.25
)7005A-4
Type N Male
7005A-5
GPC-7
1.20
0.25
)7005A-6
3.5mm Female
1.20 (dc -18 GHz)
1.25 (18 - 26.5 GHz) 0.35 (18 - 34 GHz)
1.30 (26.5 - 34 GHz)
0.25 (dc -18 GHz)
18.0 + 0.20mm
)7005A-7
dc - 34
1.20 (dc -18 GHz)
1.25 (18 - 26.5 GHz) 0.35 (18 - 34 GHz)
1.30 (26.5 - 34 GHz)
0.25 (dc -18 GHz)
3.5mm Male
18.0 + 0.20mm
26.3 + 0.35mm
26.3 + 0.35mm
)7005A-8
TNC Female
dc - 18
dc - 18
1.20
0.25
7005A-9
TNC Male
1.20
0.25
)7005A-10
dc - 40
dc - 40
dc - 40
dc - 40
1.20 (dc -18 GHz)
1.25 (18 - 26.5 GHz) 0.35 (18 - 26.5 GHz)
1.35 (26.5 - 40 GHz) 0.45 (26.5 - 40 GHz)
0.25 (dc -18 GHz)
2.92mm Female
18.0 + 0.15mm
18.0 + 0.15mm
7005A-11
2.92mm Male
1.20
1.25
1.35
(dc -18 GHz)
(18 - 26.5 GHz) 0.35
(26.5 - 40 GHz) 0.45
0.25
(dc -18 GHz)
(18 - 26.5 GHz)
(26.5 - 40 GHz)
7005A-12
2.4mm Female
1.20
1.25
1.35
(dc -18 GHz)
(18 - 26.5 GHz) 0.35
(26.5 - 40 GHz) 0.45
0.25
(dc -18 GHz)
(18 - 26.5 GHz)
(26.5 - 40 GHz)
18.0 + 0.15mm
18.0 + 0.15mm
7005A-13
2.4mm Male
1.20
1.25
1.35
(dc -18 GHz)
(18 - 26.5 GHz) 0.35
(26.5-40 GHz) 0.45
0.25
(dc -18 GHz)
(18 - 26.5 GHz)
(26.5-40 GHz)
Notes: 1. Specifications based on mated pair of 7004A-X and 7005A-XX. Refer to mating PLANAR CROWN for SWR and Insertion loss specifications.
2. Aeroflex / Weinschel 2.92mm connectors are compatible with SMA, 3.5mm, SMK and other 2.92mm connectors.
229
5305 Spectrum Drive, Frederick, MD 21703-7362 ꢀ TEL: 301-846-9222, 800-638-2048 ꢀ Fax: 301-846-9116
web: www.aeroflex.com/weinschel ꢀ email: weinschel-sales@aeroflex.com
Revision Date: 3/10/09
Connector Systems
General Specifications
1
TNC (Models 7005A-8 and -9):
PLANAR INTERFACE REPEATABILITY :
Reflection Coefficient (Magnitude):
60 dB (dc - 18 GHz)
Contact Pin and Insulator Protrusion (TNC Female): 5.03 to
5.28mm (0.198 to 0.208 inch)
50 dB (18 - 26.5 GHz)
Contact Pin and Insulator Recession: 5.28mm (0.208 in)
minimum
45 dB (26.5 - 40 GHz)
2
Transmission (Magnitude) :
40 dB (dc - 18 GHz)
These TNC male and female connectors are designed per
MIL-STD-348 interface requirements for the NEW TNC con-
nectors and operate mode free beyond 18 GHz.
35 dB (18 - 26.5 GHz)
30 dB (26.5 - 40 GHz)
2.92mm (Models 7005A-10 and -11):
2
Contact Pin Recession: 0 to 0.08mm (0 to 0.003 in)
Transmission (phase) : 0.5°
In addition to the many advantages of 2.92mm airline con-
nectors the Aeroflex / Weinschel version incorporates a
three slot female contact design resulting in a more ruggedi-
zed contact than the conventional four slot design on most
2.92mm connectors.
1. The Repeatability specifications apply to ten consecutive
disconnections and reconnections of the PLANAR INTERFACE.
2. Transmission repeatability includes the repeatability of
the VNA test cable.
OPERATING TEMPERATURE: 0°C to 85°C
CONSTRUCTION: Passivated stainless steel bodies and
coupling nuts. Gold plated beryllium copper contacts.
2.4mm (Models 7005A-12 and 7005A-13):
Contact Pin Recession: 0 to 0.08mm (0 to 0.003 in)
Applications
INTERFACE DIMENSIONS & ADDITIONAL FEATURES
OF PRIMARY CONNECTORS:
SMA (Models 7005A-1 and -2):
Contact Pin Recession: 0 to 0.1mm (0 to 0.004 in)
Front Insulator Recession: 0.23 to 0.33mm (0.009 to 0.013
in)
Aeroflex / Weinschel high frequency SMA connector oper-
ates mode free beyond 26.5 GHz and is a superior SMA
connector. It incorporates a wider shoulder on the male and
female mating planes (0.020" typical compared to 0.007" on
standard SMA connectors) and has a 3 slot female contact
instead of the conventional four slot design. Both these fea-
tures result in a more rugged connector with longer life and
improved repeatability. Unlike many commercial teflon
loaded SMA connectors, these connectors will not cause
premature damage when mated with 3.5mm, 2.92mm and
®
Test Instruments - Synthesizers; network/spectrum
analyzers, power meters and many more.
Accessories - Detectors, SWR bridges/auto testers; power
sensors, etc.,
Microwave Cables - Cables constructed with the PLANAR
BULKHEAD connector interface at one end offer the user a
wide choice of primary coaxial connectors offered on the
PLANAR CROWN models. For an instrument such as a VNA,
this eliminates the need for having different sets of test
cables for different connector configurations. Cables with a
built in PLANAR CROWN on the opposite end mate directly
with PLANAR BULKHEADS on instruments, providing an
excellent non-rotational electrical connection.
K
connectors.
Type N (Models 7005A-3 and -4):
Contact Pin Protrusion (N female): 5.18 to 5.26mm (0.204
to 0.207 in)
Contact Pin Recession (N Male): 5.28 to 5.36mm (0.208 to
0.211 in)
The male and female Type N connectors are Precision Test
connectors per MIL-STD-348. They are usable to 22 GHz.
Special Configurations - The PLANAR BULKHEAD design
can be provided with a built in attenuator or dc block. This
is a useful feature when instrument front ends require a
masking attenuator or need to be protected against dc
voltages. Although the basic mechanical design of the
PLANAR BULKHEAD was intended for panel mounting, it can
be modified to mount directly into other accessories. The
primary connector of the bulkhead can also be modified to
launch directly on microstrip or suspended stripline
substrates.
GPC-7 (Model 7005A-5):
Contact Pin Recession: 0 to 0.05mm (0 to 0.002 in)
The GPC-7 connectors are designed per IEEE Std 287.
3.5mm (Models 7005A-6 and -7):
Contact Pin Recession: 0 to 0.08mm (0 to 0.003 in)
230
5305 Spectrum Drive, Frederick, MD 21703-7362 ꢀ TEL: 301-846-9222, 800-638-2048 ꢀ Fax: 301-846-9116
web: www.aeroflex.com/weinschel ꢀ email: weinschel-sales@aeroflex.com
Revision Date: 3/10/09
DC Blocks
Model 7010
10 MHz to 26.5 GHz
PLANAR BULKHEAD with DC Block
2.92mm Connectors to Planar Interface
TEMPERATURE RANGE: 0 °C to +60 °C (operating)-40
°C to +70 °C (non-operating)
CONNECTORS: Primary connector is 2.92 mm female or
male connector, with a PLANAR INTERFACE on opposite
end. Contact Pin Recession of 2.92mm is 0 to 0.076 mm (0
to 0.003 in) for reference plane. Add -1 for female 2.92 mm
connector or -2 for 2.92mm male connector
CONSTRUCTION: Passivated Stainless steel body and
connectors; gold plated beryllium copper contacts
WEIGHT: Net: 20 g (0.7 oz)
PHYSICAL DIMENSIONS:
Features
o
Usable to 40 GHz.
o
Eliminates the requirement for a separate dc Block
to protect instrument front ends.
o
o
Offers the user multiple connector options and
quick replacement of damaged connectors.
Model 7010-1
Model 7010-2
Provides all the features and versatility of the
PLANAR CROWN® Connector System.
Specifications
NOMINAL IMPEDANCE: 50 Ω
FREQUENCY RANGE: 10 MHz to 26.5 GHz
MAXIMUM SWR:
Frequency (GHz)
SWR
10 MHz - 18
18 - 26.5
1.20
1.25
INSERTION LOSS & REPEATABILITY (dB):
Frequency (GHz)
Loss
10 MHz - 18
18 - 26.5
0.6
0.9
Note: SWR and Insertion Loss specifications are based
on a mated pair of Models 7010-X and 7005A-XX PLANAR
CROWN® connector types.
DC BLOCK CAPACITOR RATING: 1,700 pf minimum;
+ 50 Vdc working voltage
SCHEMATIC DIAGRAM:
NOTE: All dimensions are given in mm (inches) and are
maximum, unless otherwise specified.
2.92mm
Connector
Planar
Interface
243
5305 Spectrum Drive, Frederick, MD 21703-7362 ꢀ TEL: 301-846-9222, 800-638-2048 ꢀ Fax: 301-846-9116
web: www.aeroflex.com/weinschel ꢀ email: sales@aeroflex-weinschel.com
Revision Date: 3/10/09
相关型号：
7005L15FG
Dual-Port SRAM, 8KX8, 15ns, CMOS, PQFP68, 0.970 X 0.970 INCH, 0.080 INCH HEIGHT, GREEN, QFP-68
IDT
7005L15FG8
Dual-Port SRAM, 8KX8, 15ns, CMOS, PQFP68, 0.970 X 0.970 INCH, 0.080 INCH HEIGHT, GREEN, QFP-68
IDT
7005L15GG
Dual-Port SRAM, 8KX8, 15ns, CMOS, CPGA68, 1.180 X 1.180 INCH, 0.160 INCH HEIGHT, GREEN, CERAMIC, PGA-68
IDT
©2020 ICPDF网 联系我们和版权申明