CNS653-ME [ARTESYN]

650 Watt AC-DC Power Supplies;
CNS653-ME
型号: CNS653-ME
厂家: ARTESYN TECHNOLOGIES    ARTESYN TECHNOLOGIES
描述:

650 Watt AC-DC Power Supplies

文件: 总8页 (文件大小:1357K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
POWER  
CNS650-M Series  
Data Sheet  
650 Watt AC-DC Power Supplies  
Total Power: 650 Watts  
Input Voltage: 90 - 264 V  
# of Outputs: Single  
SPECIAL FEATURES  
ƒ Designed for forced air and natural  
convection cooling  
ƒ Medical and ITE safety approvals,  
2x MOPP  
ƒ PMBusinterface  
Electrical Specifications  
Input  
ƒ Active current share with OR-ing  
FET  
Input voltage range  
Frequency  
90 - 264 Vrms  
47 - 63 Hz (360 - 440 Hz with higher leakage)  
ƒ Dual fused  
Inrush current  
Leakage current  
No load power  
Output  
50 Apk, cold start  
<300 µA  
ƒ Type BF ready  
ƒ Active Power Factor Correction,  
61000-3-2 compliant  
< 500 mW  
ƒ Built-in Class B EMI filter  
ƒ Less than 1U high  
Maximum power  
650 W, forced-air cooling (750 W peak)  
400 W, free-air natural convection cooling (650 W peak)  
ƒ 4” x 6” U-channel construction  
(open-frame or end-fan variants  
available for 12 V)  
Adjustment range  
-0% / +15%  
Holdup time  
Fan output  
20 ms @ 400 W  
12 V @ 1.0 A (forced air)  
12 V @ 0.5 A (natural convection)  
5 V @ 2.0 A (forced air)  
5 V @ 1.0 A (natural convection)  
ƒ <500 mW no-load power  
consumption  
Standby output  
ƒ Three-year warranty (consult  
factory for extended terms)  
SAFETY  
ƒ UL/CSA: ES60601-1/C22.2 No.  
60601-1  
UL 60950-1/C22.2 No.  
60950-1  
ƒ TÜV:  
EN 60601-1  
ƒ DEMKO: EN 60950-1  
ƒ CB:  
IEC 60950-1/IEC 60601-1  
ƒ CCC:  
GB4943.1/GB9254;  
GB17625.1  
ƒ CE:  
LVD, RoHS  
CNS650-M Series Data Sheet  
Electrical Specifications (continued)  
Control and Protection  
Serial bus interface  
Current share  
PMBus™  
Active  
Remote sense  
2-wire (+ and -)  
Pull inhibit low = main & fan output OFF (5 V standby is ON)  
Pull inhibit high (or floating) = all outputs ON  
Remote inhibit  
AC OK  
Active high when normal AC input is present (with internal 10k ohm pull up to 3.3 Vdc)  
Active high when main O/P is within regulation (with internal 10k ohm pull up to 3.3 Vdc)  
Monitor, control and override  
DC OK  
Smart fan control  
Overvoltage protection  
Overload protection  
Overtemperature protection  
Latching / AC recyle or inhibit toggle required for PSU restart  
Auto-recovery (CC to 50% output)  
Auto-recovery with hysteresis  
Environmental Specifications  
Operating temperature  
Storage temperature  
-20 °C to +80 °C (derate at 50 °C), startup at -40 °C  
-40 °C to +85 °C  
Operating humidity  
5% to 95% (non-condensing)  
Non-operating humidity  
Maximum altitude  
5% to 95% (non-condensing)  
5000 m (3000 m for medical), derating may apply  
Other Specifications  
Isolation  
4000 Vac (input to output)  
1500 Vac (input to PE; output to PE)  
Line harmonics  
ESD immunity  
Conducted EMI  
Radiated EMI  
Surge immunity  
Medical EMC  
61000-3-2, Class A  
61000-4-2; 15kV (air)/ 8kV (contact); Criterion A  
Level B, CISPR 22 and FCC Part 15  
Level B, CISPR 22 and FCC Part 15 (with cover)  
61000-4-5, Level 3 - Criterion A; Level 4 - Criterion C  
60601-1-2, Edition 4 (cover maybe required for some tests)  
MTBF  
> 950 KHrs, 25 °C, 410 W natural convection  
> 1.3 MHrs, 25 °C, 650 W forced air  
(Telcordia, Issue 3, Method 1, Case 3)  
CNS650-M Series Data Sheet  
Ordering Information  
Vout Adjust  
Range  
(-0% /+15%)  
Max. Continuous  
Load  
Max. Peak  
Load  
Max. Continuous Max. Peak  
Output  
Voltage  
Minimum  
Load  
Model Number  
Load  
Load  
Regulation3 Ripple (p-p)4  
(Free Air)  
(Free Air)1  
(Forced Air)2  
(Forced Air)2  
CNS653-ME5  
CNS653-MF5  
CNS653-MU  
CNS655-MU  
CNS658-MU  
12 V  
12 V  
12 V  
24 V  
48 V  
12 - 13.8 V  
12 - 13.8 V  
12 - 13.8 V  
24 - 27.6 V  
48 - 55.2 V  
0 A  
0 A  
0 A  
0 A  
0 A  
NA  
NA  
54.2 A  
54.2 A  
54.2 A  
27.1 A  
13.5 A  
62.5 A  
62.5 A  
62.5 A  
31.3 A  
15.6 A  
2ꢀ  
2ꢀ  
2ꢀ  
2ꢀ  
2ꢀ  
120 mV  
120 mV  
120 mV  
240 mV  
480 mV  
30.0 A  
33.3 A  
16.7 A  
8.3 A  
54.2 A  
54.2 A  
27.1 A  
13.5 A  
1 Peak load current not to exceed 10 seconds, Ta = 50 °C.  
2 Requires at least 400 LFM of airflow.  
3 At 25 °C including factory setpoint, line voltage and load current variations.  
4 Peak-to-peak ripple measured at the output terminal with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with 0.1 µF capacitor across the output.  
5 Optional Suffix “-ME” (end-fan) and “-MF: (open-frame) available on the 12 V output.  
Input Connections (-MU and -MF Suffix)  
Output Connections  
Pin  
Function  
Power Supply Side  
System Side  
Pin  
Function Power Supply Side  
System Side  
TB1  
PE  
Molex 19099-0032 or  
19141-0063 for AWG #16  
to #14  
Molex 19099-0048 or  
19141-0083 for AWG #12  
to #10  
BAR1  
BAR2  
BAR3  
BAR4  
-Vout  
-Vout  
+Vout  
+Vout  
Dinkle EHK762V-03P  
Max Torque: 4kgf-cm  
Recommended Wire  
Size: AWG #22 to #14  
Output Terminal Screw:  
M4X8 (4X)  
Max Torque: 10kgf-cm  
TB2 L2/Neutral  
TB3 L1/Line  
Input Connections (-ME Suffix)  
Pin  
Function  
Power Supply Side  
System Side  
IEC  
Inlet  
Input AC IEC 60320 C14 (Male) IEC Cord C13 (Female)  
Other Output and Control Connections (Connector J304)  
Pin  
Designation  
Description  
1
5VSB  
+5 V Standby Output  
J304 20-Pin Connector (PSU Side):  
Landwin: 2052P20008T or  
2
5VSB  
+5 V Standby Output  
3
5VSB_GND  
SCL  
+5 V Standby Output Return/Ground  
Serial Clock Signal (I2C)  
EEPROM Address  
CviLux: CI0120P1HD0-LF  
4
5
A0  
Recommended Mating Connectors:  
CviLux: CI0120SD000 (housing)  
CI01TD21PE0 (contact pins)  
6
SDA  
Serial Data Signal (I2C)  
Active current share pin  
Return Ground for signals and I2C  
12 V Fan Output  
7
I_SHARE  
8
SYS_GND  
12VFAN  
Landwin: 2050S2000 (housing)  
2053T021V (contact pins)  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
REMOTE INHIBIT  
FAN_RTN  
VIN_GOOD  
FAN_PWM1  
PWOK  
Output Inhibit Pin (Main Output)  
12 V Fan Output Return/Ground  
Input Line OK Signal  
JST:  
PHDR-20VS (housing)  
SPHD-001T-P0.5 (contact pins)  
FAN PWM  
Output Power OK Signal  
Fan1 Tacho Signal  
See ACCESSORIES Section  
FAN_TACH1  
FAN_OVERRIDE  
FAN_FAIL  
External Fan Sensor for Override  
Fain Fail Signal  
FAN_FAULT_EN  
REMOTE_SENSE+  
REMOTE_SENSE-  
FAN Fault Enable Due to low RPM  
Positive Remote Sense  
Remote Sense Return  
CNS650-M Series Data Sheet  
Fan Output Connector for -MU, -MF Suffix (Connector J306)  
Pin  
Function  
Description  
1
12VFAN  
12 V fan output  
J306 4-Pin Connector (PSU Side):  
CviLux: CI0104P1HK0-LF  
2
FAN_RTN  
12 V fan return  
Fan PWM  
3
FAN_PWM1  
FAN_TACH1  
Landwin: 2003P0401V  
4
Fan1 tacho signal  
Recommended Mating Connectors:  
CviLux: CI0104S0000 (housing)  
CviLux: CI01T01MPP0 (contact pins)  
Landwin: 2001S0400 (housing)  
Landwin: 2005T011R (contact pins)  
Mechanical Drawings (“-MU” Suffix for U-Base Construction/12 V, 24 V and 48 V)  
16.2  
120  
PEM F-M3-1 (2X)  
2.5 mm max penetration depth from face of side chassis  
PE  
N
L
C40  
INPUT CONNECTOR  
DINKLE EHK762V-03P  
TORQUE: 4kgf-cm MAX.  
OUTPUT TERMINALS  
SCREW M4X8 (4X)  
TORQUE: 10kgf-cm MAX.  
L-0P  
J306 FAN  
CONNECTOR  
J304  
20-WAY  
SIGNAL CONNECTOR  
L1  
D1  
VR408  
TRIMPOT FOR OUTPUT ADJUSTABILITY  
COUNTER-CLOCKWISE:  
PEM F-M3-1 (2X)  
INCREASE OUTPUT VOLTAGE  
MODEL LABEL  
16.2  
120  
Thermal Hot Spot Reference  
Component  
Temperature Limit (-MU)  
D1 (AC bridge diode)  
L1 (PFC choke)  
105 °C  
115 °C  
100 °C  
125 °C  
C40 (output cap)  
PEM F-M3-1 (4X)  
3.0 MM MAX  
L-output (output choke)  
PENETRATION  
DEPTH FROM  
FACE OF BOTTOM  
CHASSIS  
Do not exceed indicated temperature limits to ensure operation is within the  
component thermal derating limits. Measure the component temperatures  
using K type thermocouples.  
26.2  
100 (2X)  
Unit weight (-MU suffix): 800 g  
152.4 0.5  
1.9 REF  
CNS650-M Series Data Sheet  
Mechanical Drawings (“-MF” Suffix for Open-frame Construction/12 V only)  
152.4 0.5  
1.9 REF  
4.5  
141.9  
43.9 1  
RoHS LABEL  
PE  
N
L
C40  
OUTPUT TERMINALS  
SCREW M4X8 (4X)  
TORQUE: 10kgf-cm MAX.  
INPUT CONNECTOR  
DINKLE EHK762V-03P  
TORQUE: 4kgf-cm MAX.  
L-0P  
J304  
20-WAY  
SIGNAL CONNECTOR  
L1  
D1  
4.5  
143.4  
4X M3  
MOUNTING  
HOLE  
VR408  
TRIMPOT FOR OUTPUT ADJUSTABILITY  
COUNTER-CLOCKWISE:  
INCREASE OUTPUT VOLTAGE  
J306 FAN CONNECTOR  
MODEL LABEL  
Thermal Hot Spot Reference  
Component  
Temperature Limit (-MF)  
D1 (AC bridge diode)  
L1 (PFC choke)  
120 °C  
120°C  
100 °C  
125 °C  
C40 (output cap)  
L-output (output choke)  
Do not exceed indicated temperature limits to ensure operation is within the  
component thermal derating limits. Measure the component temperatures  
using K type thermocouples.  
Unit weight (-MF suffix): 650 g  
CNS650-M Series Data Sheet  
Mechanical Drawings (“-ME” Suffix for End-fan Construction/12 V only)  
PEM F-M3-1 (2X)  
120  
16.2  
177.8 0.5  
4.8 REF  
AC INLET  
152.4  
OUTPUT TERMINALS  
SCREW M4X8 (4X)  
TORQUE: 10kgf-cm MAX.  
J304  
20-WAY  
SIGNAL CONNECTOR  
VR408  
20  
120  
16.2 1.9 REF  
TRIMPOT FOR OUTPUT ADJUSTABILITY  
COUNTER-CLOCKWISE:  
INCREASE OUTPUT VOLTAGE  
MODEL LABEL  
Unit weight (-ME suffix): 1000 g  
PEM F-M3-1 (2X)  
PEM F-M3-1 (4X)  
(2X) 100  
26.2  
Level B  
CNS650-M Series Data Sheet  
Performance Curves  
Output Power Derating  
700  
600  
500  
400  
300  
200  
100  
0
Convection (MF)  
Convection (MU)  
400 LFM (MF/MU)  
200 LFM (MF/MU)  
ME (End Fan)  
0
10  
20  
30  
40  
50  
60  
70  
80  
90  
Ambient Temperature [°C]  
Figure 2. Output Power vs. Input Line at Natural Convection and Forced Air Cooling  
Figure 1. Output Power vs. Ambient Temperature at Natural Convection and Forced Air  
Cooling  
Figure 4. Typical Efficiency for 24 V Output  
Figure 3. Typical Efficiency for 12 V Output  
Estimated Service Life vs. Component Temp  
150  
125  
100  
75  
Esimated Life  
50  
25  
0
110  
105  
100  
95  
90  
85  
80  
75  
C40 Temperature [°C]  
Figure 5. Typical Efficiency for 48 V Output  
Figure 6. Estimated Product Useful Life Based on C40 Case Temperature  
CNS650-M Series Data Sheet  
Accessories  
Orderable Part Number  
Description  
Description  
PIN 20  
PIN 2  
PIN 19  
J304 (20 Pin) Mating Connector with  
0.3m wires attached  
73-788-001  
PIN 3  
PIN 1  
300 5 mm  
Output Bussbar Extension Kit for Vertical  
Wire Interface  
CNS-BBAR-KIT  
USB to I2C Adaptor for PMBus  
Communication  
73-769-002  
WORLDWIDE OFFICES  
Asia (HK)  
Americas  
2900 S.Diablo Way  
Tempe, AZ 85282  
USA  
Europe (UK)  
Waterfront Business Park  
Merry Hill, Dudley  
West Midlands, DY5 1LX  
United Kingdom  
+44 (0) 1384 842 211  
14/F, Lu Plaza  
2 Wing Yip Street  
Kwun Tong, Kowloon  
Hong Kong  
www.artesyn.com  
+1 888 412 7832  
+852 2176 3333  
For more information: www.artesyn.com/power  
For support: productsupport.ep@artesyn.com  
Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and  
service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names,  
trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc.  
All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal.  
CNS650-M Series DS 24Aug2016  

相关型号:

CNS653-ME5

650 Watt AC-DC Power Supplies
ARTESYN

CNS653-MF5

650 Watt AC-DC Power Supplies
ARTESYN

CNS653-MU

650 Watt AC-DC Power Supplies
ARTESYN

CNS655-MU

650 Watt AC-DC Power Supplies
ARTESYN

CNS658-MU

650 Watt AC-DC Power Supplies
ARTESYN

CNS7105

COAXIAL AMPLIFIED NOISE SOURCE
MICRONETICS

CNS7105-D1C

High Power Broadband Noise Sources 100 kHz to 3 MHz
MICRONETICS

CNS7106

COAXIAL AMPLIFIED NOISE SOURCE
MICRONETICS

CNS7106-D1C

High Power Broadband Noise Sources 200 kHz to 12 MHz
MICRONETICS

CNS7108

COAXIAL AMPLIFIED NOISE SOURCE
MICRONETICS

CNS7109

COAXIAL AMPLIFIED NOISE SOURCE
MICRONETICS

CNS722

STRAIGHT N TYPE PLUG FOR ECS CABLE 3C142B, 311901, AND 3C058A
ETC