LCB50D [ARTESYN]
AC/DC CONVERTER 3.3V 50W;型号: | LCB50D |
厂家: | ARTESYN TECHNOLOGIES |
描述: | AC/DC CONVERTER 3.3V 50W |
文件: | 总3页 (文件大小:337K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
POWER
LCB50
Data Sheet
50 Watt Single Output Power Supply
Total Power: 50 W
# of Outputs: Single
Outputs:
3.3 - 48 V
Special featureS
No-load power consumption 0.5 W
Low cost
3.9” x 3.2” x 1.4”
10% output voltage adjust
-25 °C to 70 °C with derating
High efficiency: 90% @ 230 Vac
Power ON with LED indicator
Withstand 5G vibration test
Two year warranty
Electrical Specifications
Input
Input range
88 - 264 Vac
125 - 373 Vdc
Frequency
47 - 63 Hz, Nominal 50/60
Inrush current
40 A, cold start at 25 °C, 230 Vac
compliance
EMI Class B
EN61000-3-2: 2000 Class A,
EN61000-3-3: 1995+A1:2001
Harmonics
Input current
Hold up time
01.3 A / 115 Vac
EN61000 EN61204-3
>32 ms / 230 Vac
>10 ms / 115 Vac at full load
SafetY
UL, cUL 60950-1
Efficiency
90% typical at full Load / 230 Vac nominal
< 2 mA at 264 Vac
Leakage current
Isolation
TUV
CE
60950-1
Isolation: PRI-Chassis 1500 Vac
PRI-SEC 3000 Vac
SEC-Chassis 500 Vac
LCB50 Data Sheet
Electrical Specifications
Output
Output rating
See ordering information
90 - 264 Vac
Output tolerance
Total regulation range
Rated load
1% to 3%
90 - 264 Vac
0.5% to 2%
Combined line/load/transient when measured at output terminal
Derate linear to 50% from 50 °C to 70 °C
33 - 52.8 W
Output noise (PARD)
100 - 200 mV p-p
Main output
Measured with a 0.1 μF Ceramic and 10 μF Tantalum Capacitor on any output, 20 MHz
Output voltage overshoot
Short circuit protection
Output isolation
No overshoot/undershoot outside the regulation band during on or off cycle
Protected, no damage to occur
Bounce mode
Standard per safety requirements
Main output
Overload protection (OCP)
Overvoltage protection (OVP)
Output voltage adjust
>110% rated output power
115% to 150%
10%
Main output
Main output
Environmental Specifications
Operating temperature
Storage temperature
Humidity
-25 °C to +70 °C, linear derating to 50% from 50 °C to 70 °C
-40 °C to +85 °C
20 to 90%, non-condensing
Vibration
10 - 500 Hz, 5G 10 min/1 cycle, period for 60 min each along X, Y, Z axes
Ordering Information
Model Number
Output Voltage
Output Current
10 A
Vo Adjust
10%
10%
10%
10%
10%
10%
Output Power
33 W
Efficiency
78%
LCB50D
3.3 V
5 V
LCB50E
LCB50L
LCB50N
LCB50Q
LCB50W
10 A
50 W
83%
12 V
15 V
24 V
48 V
4.2 A
50.4 W
51 W
88%
3.4 A
89%
2.2 A
52.8 W
52.8 W
90%
1.1 A
90%
Miscellaneous Specifications
Bꢀꢁꢂ-Iꢂ
100% Burn-in at 45 °C, at full load. Duration of burn-in determined by Quality Assurance Procedures.
MTBF
The power supply has a minimum MTBF of 420K hours according to MIL-HDBK-217F.
WꢃꢁꢁꢃꢂTꢄ
Artesyn Embedded Power shall warrant the power supply to be free of defects in materials and workmanship for a minimum period of
two years from the date of shipment, when operated within specifications. The warranty shall be fully transferable to the end owner of the
equipment powered by the supply.
LCB50 Data Sheet
Mechanical Drawings
WORLDWIDE OFFICES
Asia (HK)
Americas
Europe (UK)
14/F, Lu Plaza
2900 South Diablo Way
Suite B100
Tempe, AZ 85282, USA
+1 888 412 7832
Ground Floor Offices, Barberry House
4 Harbour Buildings, Waterfront West
Brierley Hill, West Midlands
DY5 1LN, UK
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
www.artesyn.com
+852 2176 3333
+44 (0) 1384 842 211
Artesyn Embedded Technologies, Artesyn Embedded Power, Artesyn, and all Artesyn related logos are
trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to
are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to
change without notice. © 2019 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms
and conditions, please visit www.artesyn.com/legal.
For more information: www.artesyn.com
For support: productsupport.ep@artesyn.com
LCB50 DS 12Dec2019
©2020 ICPDF网 联系我们和版权申明