NFS110-7601P [ARTESYN]

80-110W AC/DC Universal Input Switch Mode Power Supplies; 80-110W AC / DC通用输入开关电源


型号：	NFS110-7601P
厂家：	ARTESYN TECHNOLOGIES
描述：	80-110W AC/DC Universal Input Switch Mode Power Supplies 80-110W AC / DC通用输入开关电源开关
文件：	总3页 (文件大小：62K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

NFS110 Series

S i n g l e a n d q u a d o u t p u t

LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 80-110W AC/DC Universal Input Switch Mode Power Supplies

• 7.0 x 4.25 x 1.8 inch package

• Overvoltage and short circuit protection

• 110W with 20CFM

• Adjustable outputs

• EN55022, EN55011 conducted emissions level B

• UL, VDE and CSA safety approvals

• CE mark

The NFS110 series is a 110W universal input AC/DC power supply on a 7 x 4.25 inch

card. The NFS110 series has four single and three quad output models and has proven

itself to be highly reliable and versatile product for a wide range of communication and

industrial applications, with a very high peak current capability on each output for drive

and motor applications. The NFS110 provides 80W of output power with free air

convection cooling which can be boosted to 110W with 20CFM of air. Standard

features include overvoltage and short circuit protection. The series, with full

international safety approval and the CE mark, meets conducted emissions EN55022

level B. The NFS110 series is designed for use in low power data networking,

computer, telecom and industrial applications such as servers, thermal printers, storage

devices, vending machines and POS equipment.

2 YEAR WARRANTY

All specifications are typical at nominal input, full load at 25°C unless otherwise stated

SPECIFICATIONS

OUTPUT SPECIFICATIONS

GENERAL SPECIFICATIONS

Voltage adjustability

+5.1V output on multi’s

±3.0%

12V to 14V

15V to 18V

24V to 30V

Hold-up time

110VAC @ 80W

35ms

17ms

5.1V single output

12V single output

15V single output

24V single output

110VAC @ 110W

230VAC @ 80W

230VAC @ 110W

140ms

100ms

Efficiency

Multiple outputs

+5.1V single

12V and 15V singles

24V single

70% typical

72% typical

75% typical

Line regulation

LL to HL, FL

All outputs on all units

±0.1% max.

Overshoot/undershoot

At turn-on

Isolation voltage

Input/output

Input/chassis

3000VAC

1500VAC

Temperature coefficient All outputs

±0.02% /°C

Overvoltage protection

Multi output 5.1V only

6.25V±0.75V

15.75V±1.0V

22V±1.5V

Switching frequency

At 100 Watts output

At zero load

20 to 70kHz

5.1V single

12V single

15V single

24V single

100 to 250kHz

Approvals and

standards

(See Note 12)

VDE0805, EN60950, IEC950

IEC1010, UL1950

33V±2.5V

CSA C22.2 No. 950

Output power limit

Primary power

limited

Pin max. 160W

Pout min. 110W

Weight

Singles

Multiple outputs

550g (19.4oz)

600g (21.2oz)

Minimum output current (See Note 13)

Short circuit protection

MTBF (See Note 9)

MIL-HDBK-217E

125,000 hours

Burst mode operation

ENVIRONMENTAL SPECIFICATIONS

INPUT SPECIFICATIONS

Thermal performance

(See Notes 9, 10)

Operating, see curve

0°C to +70°C

Non-operating

–40°C to +85°C

Input voltage range

85 to 264VAC

0°C to +50°C,

amb. convection cooled

+50°C to +70°C,

amb. convection cooled

0°C to +50°C,

20CFM forced air

+50°C to +70°C,

20CFM forced air

80W

Derate 2W/°C

110W

120 to 370VDC

Input frequency range

47Hz to 440Hz

35A

Input surge current

230VAC

Safety ground

leakage current

110VAC, 50Hz

230VAC, 50Hz

0.2mA, max.

0.4mA, max.

Derate

2.75W/°C

Peak, 0°C to +50°C,

max. 60 seconds

110W

EMC CHARACTERISTICS

Conducted emissions

EN55022, FCC part 15

Level B

Level A

Relative humidity

Altitude

Non-condensing

5% to 95% RH

Radiated emissions

ESD air

EN61000-4-2, level 3

EN61000-4-2, level 4

EN61000-4-5, level 3

EN61000-4-4, level 3

EN61000-4-3, level 3

EN61000-4-6, level 3

Perf. criteria 1

Perf. criteria 2

Perf. criteria 1

Operating

Non-operating

10,000 feet max.

40,000 feet max.

ESD contact

Surge

Fast transients

Radiated immunity

Conducted immunity

Vibration (See Note 11) 5Hz to 500Hz

2.4G approx.

File Name: NFS110.PDF Rev: 01 Jan 2000

NFS110 Series

S i n g l e a n d q u a d o u t p u t

LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 80-110W AC/DC Universal Input Switch Mode Power Supplies

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

OUTPUT CURRENTS

OUTPUT

VOLTAGE

TOTAL

REGULATION

(4)

(F)

RIPPLE

MODEL NUMBERS

(5)

(2)

(3)

MAX ⁽¹⁾

8.0A

4.5A

0.5A

8.0A

3.5A

4.5A

0.5A

8.0A

4.0A

0.5A

16.0A

7.0A

5.0A

3.5A

PEAK

FAN

+5.1V

+12.0V

–12.0V

–5.0V

20.0A

9.0A

1.5A

20.0A

4.5A

9.0A

1.5A

20A

10.0A

5.0A

1.0A

10.0A

4.5A

5.0A

1.0A

10A

50mV

±2.0%

±3.0%

±2.0%

+10/–5.0%

±3.0%

±2.0%

±3.0%

±2.0%

NFS110-7601P

120mV

50mV

(6)

+5.1V (I_A)

+24.0V (I_B) ⁽⁶⁾

+12.0V

–12.0V

+5.1V

50mV

NFS110-7602P

240mV

120mV

50mV

NFS110-7604P

+15.0V

–15.0V

–5.0V

7.5A

1.5A

22.0A

9.0A

7.3A

4.5A

150mV

50mV

1.0A

20.0A

9.0A

7.3A

4.5A

(7,8)

5.1V

50mV

NFS110-7605

(7,8)

12V

120mV

150mV

240mV

NFS110-7612

(7,8)

15V

NFS110-7615

(7,8)

24V

NFS110-7624

Notes

TRANSIENT RESPONSE

Convection cooled, 80W maximum.

Peak outputs lasting less than 60 seconds with duty cycle less than 10% .

Total peak power must not exceed 110W.

NFS110-7601P

+5.1V (7.5A to 10A)

+12V (2.5A to 5A)

-12V (0.5A to 1A)

-5V (0.5A to 1A)

150mV peak,

1ms recovery

100mV peak,

0.5ms recovery

100mV peak,

0.5ms recovery

100mV peak,

0.5ms recovery

Forced air, 20CFM at 1 atmosphere, 110W maximum.

Figure is peak-to-peak. Output ripple is measured across a 50MHz

bandwidth using a 12 inch twisted pair terminated with a 47µF capacitor.

Total regulation is defined as the static output regulation at 25°C, including

initial tolerance, line voltage within stated limits and output voltages

adjusted to their factory settings.

To achieve stated regulation on the 24V output on the NFS110-7602P, the

following load condition must be true: I / I ≤ 5, where:

NFS110-7602P

NFS110-7604P

+5.1V (7.5A to 10A)

+24V (1.5A to 3A)

+12V (2.5A to 5A)

-12V (0.5A to 1A)

150mV peak,

1ms recovery

300mV peak,

1ms recovery

100mV peak,

0.5ms recovery

100mV peak,

0.5ms recovery

= +5.1V output current, and

= +24V output current

The +24V output will maintain ±5.0% regulation under the following

additional condition: I ≤ 5A.

Single output models have floating outputs which may be referenced as

either positive or negative. Higher voltage supplies may be adjusted over a

wide output voltage range, as long as the total output power does not

exceed 80 Watts (natural convection) or 110 Watts (forced air).

Power fail detect not available on single output models.

+5.1V (7.5A to 10A)

+15V (2.5A to 5A)

-15V (0.5A to 1A)

-5V (0.5A to 1A)

150mV peak,

1ms recovery

100mV peak,

0.5ms recovery

100mV peak,

0.5ms recovery

100mV peak,

0.5ms recovery

Derating curve is application specific for ambient temperatures >50°C, for

optimum reliability no part of the heatsink should exceed 90^oC and no

semiconductor case temperature should exceed 100^oC.

10 Caution: Allow a minimum of 1 second after disconnecting the power when

making thermal measurements.

11 Three orthogonal axes, random vibration, 10 minute test for each axis.

12 This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

13 Artesyn Technologies recommends a minimum load of 11W to achieve the

design MTBF. See the derating curve on page 3.

NFS110-7605

NFS110-7612

NFS110-7615

NFS110-7624

+5.1V (10A to 20A)

+12V (4.5A to 9A)

250mV peak,

1ms recovery

360mV peak,

1ms recovery

+15V (3.65A to 7.3A)

+24V (2.25A to 4.5A)

450mV peak,

1ms recovery

720mV peak,

1ms recovery

www.a rte s yn.com

File Name: NFS110.PDF Rev: 01 Jan 2000

NFS110 Series

S i n g l e a n d q u a d o u t p u t

LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 80-110W AC/DC Universal Input Switch Mode Power Supplies

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

AC (J 1) mating connector

Power fail detect signal (Note 8)

50ms≤T1≤200ms

T2 will vary with line and load

T3≥3ms

Pout: 110W

PFD output is an open collector which

will sink ≤40mA in the low state.

OPTIONAL POWER FAIL DETECT TIMING DIAGRAM

Molex 09-50-3051 or Molex 09-91-0500 mating connector with 2478 or

equivalent crimp terminals.

AC INPUT

4.75V

5V OUTPUT

PFD SIGNAL

DC (J 2) mating connector

Molex 09-50-3131 or Molex 09-91-1300 mating connector with 2478 or

equivalent crimp terminals.

HIGH

3.5V MIN

LOW

0-0.4 MAX

0.475

±0.010

(12.07)

DERATING CURVE (See Notes 9, 10)

Output Power (Watts)

110W

80W

1.80 (45.72) MAX

1.00

±0.005

(25.4)

20 CFM FORCED AIR COOLING

6-32 UNC

(4PL)

0.050 ±0.020

(1.27)

1.55 ±0.005

(39.37)

3.35 ±0.015 (85.09)

PIN 1

Voltage Adjust

Optional

NATURAL

CONVECTION

COOLING

55W

40W

Power Fail

Detect Circuit

(Key = Pin 2)

4.250

±0.020

(107.95)

3.750

±0.005

(95.25)

PIN 1

11W

0.156

11W MINIMUM LOAD REQUIRED AT 230VAC

DIA. HOLE

(4PL)

0°C

10°C

20°C

30°C

40°C

50°C

60°C

70°C

5A, 250 VAC

0.250

±0.010

(6.35)

6.50 ±0.005 (165.1)

7.00 ±0.020 (177.8)

0.250

±0.010

(6.35)

ALL DIMENSIONS IN INCHES (mm)

PIN CONNECTIONS

–7602P –7604P

J 1

–7601P

SINGLES

Mechanical Notes

Pin 1

Pin 2

Pin 3

J 2

AC Ground AC Ground AC Ground AC Ground

AC Neutral AC Neutral AC Neutral AC Neutral

Metallic or non-metallic stand-offs (maximum diameter 5.4mm) can be

used in all four mounting holes without effecting safety approval.

The ground pad of the mounting hole near J1, allows system grounding

through a metal stand-off to the system chassis.

The heat sink is grounded, and allows system grounding by mechanical

connection to the system chassis.

The supply must be mechanically supported using the PCB mounting holes

and may be additionally supported by the heatsink mounting holes.

It is always advisable to attach the power supply heat sink to another

thermal dissipator (such as a chassis or finned heatsink etc). The resulting

decrease in heat sink mounted component temperatures will improve

power supply lifetime.

AC Line

Pin 1

Pin 2

Pin 3

Pin 4

Pin 5

Pin 6

Pin 7

Pin 8

Pin 9

Pin 10

Pin 11

Pin 12

Pin 13

+5.1V

Return

+12V

PFD

+5.1V

Return

+12V

PFD

+5.1V

Return

+15V

PFD

out

Return

A standard L-bracket and cover is available for mounting which contains all

screws, connectors and necessary mounting hardware. Two different kits

are available, order part number ‘NFS110 COVER KIT’ or ‘NFS110C’.

out

N/C

International Safety Standard Approvals

–12V

–15V

VDE0805/EN60950/IEC950/IEC1010 File No. 10401-3336-1049

Licence No. 2874, 1653 and 1049

Removed for Key

+24V –5V

UL1950 File No. E136005

–5V

N/C

CSA C22.2 No. 950 File No. LR41062C

N/C = no connection.

® 2002

The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising

from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.

www.a rte s yn.com

File Name: NFS110.PDF Rev: 01 Jan 2000

NFS110-7601P [ARTESYN]

相关型号：

NFS110-7601PJ

NFS110-7602P

NFS110-7602PJ

NFS110-7604P

NFS110-7604PJ

NFS110-7605

NFS110-7605J

NFS110-7612

NFS110-7612J

NFS110-7615

NFS110-7615J

NFS110-7624