NLS110-9602 [ARTESYN]
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES; 中低功率AC / DC电源
| 型号： | NLS110-9602 |
| 厂家： | 
ARTESYN TECHNOLOGIES |
| 描述： | LOW TO MEDIUM POWER AC/DC POWER SUPPLIES |
| 文件： | 总3页 (文件大小：60K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NLS110-9602
Q u a d o u t p u t
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 80-110W AC/DC Universal Input Switch Mode Power Supplies
1
• 7.0 x 4.25 x 1U package
• Overvoltage and short circuit protection
• 110W with 20CFM
• 90VAC to 264VAC universal input range
• EN55022 conducted emissions level B, radiated
emissions level A
• UL, VDE and CSA safety approvals
• CE mark
The NLS110-9602 is a 110W universal input AC/DC power supply on a 7 x 4.25 inch
card. The NLS110-9602 has proven itself to be highly reliable and versatile product for
a wide range of communication and industrial applications, with a very high peak
current capability on each output for drive and motor applications. The NLS110-9602
provides 80W of output power with free air convection cooling which can be boosted to
110W with 20CFM of air. Standard features include overvoltage and short circuit
protection. The NLS110-9602 with full international safety approval and the CE mark,
meets conducted emissions EN55022 level B. The NLS110-9602 is designed for use in
low power data networking, computer, telecom and industrial applications such as
servers, thermal printers, storage devices, vending machines and POS equipment.
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Total regulation
Line and load
(See table)
1.0s, max.
Hold-up time
120VAC @ 60Hz
35ms @ 80W
25ms @ 110W
Rise Time
At turn-on
Efficiency
120VAC @ 110W
70% min.
Transient response
Temperature coefficient
Overvoltage protection
Short circuit protection
(See table)
±0.02% /°C
125% , ±10%
Isolation voltage
Input/output
Input/chassis
3000VAC
1500VAC
+5.1V
Approvals and
standards
EN60950, VDE0805, IEC950
UL1950, CSA C22.2 No. 950
Cyclic operation
Yes with auto
recovery
Weight
383g (13.5 oz.)
MTBF (@ 25˚C)
MIL-HDBK-217F
220,000 hours min.
INPUT SPECIFICATIONS
Input voltage range
Universal input
90 to 264VDC
47Hz to 440Hz
(6,8)
ENVIRONMENTAL SPECIFICATIONS
Input frequency range
Thermal performance
Operating ambient,
(see derating curve)
Non-operating
+50°C to +70°C,
amb. convection cooled
0°C to +50°C
Input surge current
(cold start)
120VAC
230VAC
18A max.
35A max.
–40°C to +85°C
Derate to
Safety ground
leakage current
120VAC, 60Hz
230VAC, 50Hz
0.45mA
0.75mA
50% load
0°C to +50°C,
80W
amb. convection cooled
0°C to +50°C ambient,
150LFM forced air
Input current
Input fuse
120VAC @ 80W
120VAC @ 110W
230VAC @ 80W
230VAC @ 110W
0.95A rms
1.35A rms
0.53A rms
0.75A rms
110W
Peak (0°C to +50°C, 60s) (See Note 4)
Relative humidity
Altitude
Non-condensing
5% to 95% RH
UL/IEC127
F3.15A H, 250VAC
Operating
Non-operating
10,000 feet max.
30,000 feet max.
(11)
EMC CHARACTERISTICS
Conducted emissions
EN55022, FCC part 15
EN55022, FCC part 15
EN61000-3-2
Level B
Level A
Compliant
Vibration (See Note 7)
Shock
5Hz to 500Hz
2.4G rms peak
516.4 Part IV
Radiated emissions
Harmonic current
emission correction
ESD air
ESD contact
Surge
Fast transients
Radiated immunity
Conducted immunity
per MIL-STD-810E
EN61000-4-2
EN61000-4-2
EN61000-4-5
EN61000-4-4
EN61000-4-3
EN61000-4-6
Level 3
Level 3
Level 3
Level 3
Level 3
Level 3
File Name: NLS110.PDF Rev: 12 June 2001
NLS110-9602
Q u a d o u t p u t
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 80-110W AC/DC Universal Input Switch Mode Power Supplies
2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT CURRENTS
OUTPUT
VOLTAGE
TOTAL
REGULATION
(4)
RIPPLE
MODEL NUMBERS
(5)
(2)
(3)
MAX (1)
8.0A
PEAK
FAN
(12)
+5.1V
+24.0V
+12.0V
–12.0V
20.0A
4.5A
9.0A
1.5A
10.0A
4.5A
5.0A
1.0A
50mV
±2.0%
±5.0%
±3.0%
±3.0%
NLS110-9602
3.5A
240mV
120mV
120mV
4.5A
0.5A
Notes
TRANSIENT RESPONSE
1
2
Convection cooled, 80W maximum.
Peak outputs lasting less than 60 seconds with duty cycle less than 10% .
Total peak power must not exceed 110W.
NLS110-9602
+5.1V (7.5A to 10A)
+24V (1.5A to 3A)
+12V (2.5A to 5A)
-12V (0.5A to 1A)
150mV peak,
1ms recovery
300mV peak,
1ms recovery
100mV peak,
0.5ms recovery
3
4
Forced air, 20CFM at 1 atmosphere, 110W maximum.
Amplitude is peak-to-peak. Output ripple is measured across a 20MHz
bandwidth using a 12 inch twisted pair terminated with a 10µF capacitor.
Total regulation is defined as the static output regulation at 25°C, including
initial tolerance, line voltage within stated limits and output voltages
adjusted to their factory settings.
Derating curve is application specific for ambient temperatures >50°C.
Three orthogonal axes, random vibration, 10 minute test for each axis.
For optimum reliability no part of the heatsink should exceed 100oC and no
semiconductor case temperature should exceed 115oC.
5
100mV peak,
0.5ms recovery
6
7
8
9
Caution: Allow a minimum of 1 second after disconnecting the power when
making thermal measurements.
DERATING CURVE
Output Power (Watts)
10 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
11 The EMI specifications reference measurements made with the power
supply mounted on a grounded metal sheet extending 1 inch beyond each
edge, using an unshielded cable. No external filtering is required during
conducted emissions testing but some applications may require additional
filtering to achieve system compliance. A line choke, (AC input cords
looped twice through an EMI suppression toroid) was used during radiated
emissions testing. Considerable radiated testing in 1U six-sided boxes has
shown that units can meet level B in typical systems. Application support
is available from the factory to assist with EMI compliance.
110W
80W
150 LFM FORCED
AIR COOLING
NATURAL
CONVECTION
COOLING
55W
40W
12 Requires a minimum mounting stand-off of 6.35mm (0.25 inches) in the end
use product.
0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C
OUTPUT PIN CONNECTIONS
INPUT
PIN CONNECTIONS
J 1
J 2
FUNCTION
+5.1V
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
Pin 11
Pin 12
+5.1V
Pin 1
AC Neutral
No Connection
AC Line
Return
Return
Return
Return
+12V
Pin 2
Pin 3
Power fail detect signal
50ms≤T1≤200ms
OPTIONAL POWER FAIL DETECT TIMING DIAGRAM
T2 will vary with line and load
AC INPUT
J 4
T3≥3ms
4.75V
4.75V
5V OUTPUT
PFD SIGNAL
Pout: 110W
Pin 1
Safety Earth
HIGH
PFD output is an open collector
which will sink ≤40mA in the low
state.
3.5V MIN
T3
LOW
0-0.4 MAX
T2
T1
+12V
+24V
PFD
-12V Return
-12V
Please consult our website for the following items: ✔ Application Note
www.a rte s yn.com
File Name: NLS110.PDF Rev: 12 June 2001
NLS110-9602
Q u a d o u t p u t
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES 80-110W AC/DC Universal Input Switch Mode Power Supplies
3
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
Mechanical Notes
A
All dimensions are in inches (mm).
2
7.00 (177.80)
6.500 (165.100)
4
3
J4
1
T1 (REF)
12
Recommended direction
for forced air relative to
power supply orientation
shown below.
4.25
(107.95)
T2 (REF)
3.750
(95.250)
J2
1
2
3
4
Optimum.
Very good.
Not recommended.
Not recommended.
F1
J1
1
3
1
2
1
0.25 (6.35)
0.25 (6.35)
J5
TOLERANCE: .XXX: ±0.005 (0.127)
.XX: ±0.02 (0.51)
ALL DIMENSIONS IN INCHES (mm)
Input and output connectors
Mating connectors
AC (J 1) connector type
AC (J 1) mating connector type
Molex 26-60-4030 or equivalent.
Molex 09-50-3031 or equivalent with Molex
08-50-0105 or equivalent crimp terminals.
DC (J 2) connector type
12 position Molex Spox type 26-48-1125
or equivalent.
DC (J 2) mating connector type
Molex Spox type 26-03-3121 and
contact 08-52-0113.
Earth (J 4) connector type
Earth (J 4) mating connector type
Male 0.250 quick disconnect.
Molex 90028.
International Safety Standard Approvals
VDE0805/EN60950/IEC950/IEC1010 File No. 10401-3336-1049
Licence No. 2874, 1653 and 1049
UL1950 File No. E136005
CSA C22.2 No. 950 File No. LR41062C
Data Sheet © Artesyn Technologies
® 2002
The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: ✔ Application Note
www.a rte s yn.com
File Name: NLS110.PDF Rev: 12 June 2001
相关型号：
©2020 ICPDF网 联系我们和版权申明