ALN0832 概述
Internally Matched LNA Module 内部匹配LNA模块
ALN0832 数据手册
通过下载ALN0832数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载plerowALN0832
Internally Matched LNA Module
Features
· S21 = 29.1 dB @ 830 MHz
Description
The plerowTM ALN-series is the compactly designed surface-mount
module for the use of the LNA with or without the following gain blocks in
the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS,
PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communi-
cation terminals, CATV and so on. It has an exceptional performance of
low noise figure, high gain, high OIP3, and low bias current. The stability
factor is always kept more than unity over the application band in order
to ensure its unconditionally stable implementation to the application
system environment. The surface-mount module package including the
completed matching circuit and other components necessary just in case
allows very simple and convenient implementation onto the system
board in mass production level.
= 28.9 dB @ 835 MHz
· NF of 0.7 dB over Frequency
· Unconditionally Stable
· Single 5V Supply
· High OIP3 @ Low Current
Specifications (in Production)
Typ. @ T = 25°C, Vs = 5 V, Freq. = 832.5 MHz, Zo.sys = 50 ohm
2-stage Single Type
Specifications
Typ
Parameter
Unit
Min
830
28
Max
835
Frequency Range
Gain
MHz
dB
29
± 0.1
0.70
32
More Information
Website: www.asb.co.kr
E-mail: sales@asb.co.kr
Gain Flatness
dB
± 0.2
Noise Figure
dB
0.75
Output IP3 (1)
dBm
dB
31
16
S11 / S22 (2)
-15 / -15
150
Tel: (82) 42-528-7223
Fax: (82) 42-528-7222
Output P1dB
dBm
µsec
mA
V
17
-
ASB Inc., 4th Fl. Venture Town
Bldg., 367-17 Goijeong-Dong,
Seo-Gu, Daejon 302-716, Korea
Switching Time (3)
Supply Current
Supply Voltage
Impedance
130
5
50
Ω
Max. RF Input Power
Package Type & Size
Operating temperature is -40°C to +85°C.
dBm
mm
C.W 29 ~ 31 (before fail)
Surface Mount Type, 13Wx13Lx3.8H
1) OIP3 is measured with two tones at an output power of 0 dBm / tone separated by 1 MHz.
2) S11/S22 (max) is the worst value within the frequency band.
3) Switching time means the time that takes for output power to get stabilized to its final level after switching DC voltage from 0 V to VS.
Outline Drawing (Unit: mm)
Pin Number
Function
RF In
plerow
ALN0832
3
8
RF Out
+Vcc
ASB Inc.
10
Others
Ground
(Top View)
(Bottom View)
Note: 1. The number and size of ground via holes in
a circuit board is critical for thermal RF
grounding considerations.
Solder Stencil Area
2. We recommend that the ground via holes be
placed on the bottom of all ground pins for
better RF and thermal performance, as
shown in the drawing at the left side.
(Side View)
Ø0.4 plated thru holes to ground plane
(Recommended Footprint)
1/4
www.asb.co.kr
November 2008
plerowALN0832
Internally Matched LNA Module
S-parameters
Typical Performance
(Measured)
830~835
+5 V
S-parameters & K Factor
Noise Figure
OIP3
P1dB
2/4
www.asb.co.kr
November 2008
plerowALN0832
Internally Matched LNA Module
RF Performance with Voltage Change
Item
Voltage
S11
(dB)
S22
(dB)
S21
(dB)
G/F
(dB)
NF
(dB)
P1dB
(dBm)
OIP3
(dBm)
Current
(mA)
4.5
4.6
4.7
4.8
4.9
5.0
5.1
5.2
5.3
5.4
5.5
-15.11
-15.33
-15.52
-15.69
-15.77
-15.92
-16.09
-16.20
-16.31
-16.36
-16.44
-18.16
-17.72
-17.38
-17.01
-16.83
-16.54
-16.21
-16.02
-15.86
-15.66
-15.50
28.98
29.10
29.20
29.29
29.38
29.46
29.54
29.60
29.66
29.71
29.76
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.695
0.699
0.705
0.704
0.692
0.693
0.705
0.709
0.709
0.709
0.713
14.12
14.99
15.62
16.04
16.80
17.28
17.70
18.18
18.62
18.93
19.27
27.08
28.55
29.26
30.25
30.91
32.17
32.79
33.51
34.05
34.54
35.40
99
105
110
115
119
124
132
137
143
149
154
RF Performance with Operating Temperature
Item
Temp.
S11
(dB)
S22
(dB)
S21
(dB)
G/F
(dB)
NF
(dB)
P1dB
(dBm)
OIP3
(dBm)
Current
(mA)
- 40°C
- 20°C
0°C
-15.85
-16.18
-16.12
-16.03
-15.77
-15.50
-15.03
-14.70
-14.94
-15.44
-15.90
-16.53
-16.88
-17.30
-17.76
-18.48
29.86
29.76
29.62
29.43
29.33
29.24
29.10
28.95
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.491
0.544
0.609
0.692
0.741
0.812
0.888
1.001
17.16
17.32
17.43
17.41
17.48
17.52
17.60
17.65
32.36
32.36
32.25
32.10
32.06
32.02
31.93
31.95
117
122
124
126
127
128
130
130
25°C
40°C
60°C
80°C
100°C
3/4
www.asb.co.kr
November 2008
plerowALN0832
Internally Matched LNA Module
Application Circuit
DC
+
-
Tantal
Capacitor
IN
OUT
C2
ALN
C1
1) The tantal capacitor is optional and for bypassing the AC noise introduced from the DC supply.
The capacitance value may be determined by customer’s DC supply status.
2) So-called DC blocking capacitors are always necessarily placed at the input and output port
for allowing only the RF signal to pass and blocking the DC component in the signal. The DC
blocking capacitors are included inside the LNA module. Therefore, C1 & C2 capacitors may
not be necessary, but can be added just in case that the customer wants. The value of C1 &
C2 is determined by considering the application frequency.
Recommended Soldering Reflow Process
Evaluation Board Layout
+Vcc
20~40 sec
260°C
Ramp-up
(3˚C/sec)
Ramp-down
(6°C/sec)
OUT
IN
200°C
150°C
60~180 sec
Size 25 x 25mm
(for ALN Series – 13x13mm)
4/4
www.asb.co.kr
November 2008
ALN0832 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
ALN0836 | ASB | Internally Matched LNA Module | 获取价格 | |
ALN0836AT | ASB | Internally Matched LNA Module | 获取价格 | |
ALN0837 | ASB | Internally Matched LNA Module | 获取价格 | |
ALN0837AT | ASB | Internally Matched LNA Module | 获取价格 | |
ALN0838 | ASB | Internally Matched LNA Module | 获取价格 | |
ALN0838AT | ASB | Internally Matched LNA Module | 获取价格 | |
ALN0839AT | ASB | Internally Matched LNA Module | 获取价格 | |
ALN0855 | ASB | Internally Matched LNA Module | 获取价格 | |
ALN0859 | ASB | Internally Matched LNA Module | 获取价格 | |
ALN0859AT | ASB | Internally Matched LNA Module | 获取价格 |
ALN0832 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6