CSM-015G-LP [ASC]
Surface Mount Basic Pressure Sensors;型号: | CSM-015G-LP |
厂家: | All Sensors |
描述: | Surface Mount Basic Pressure Sensors |
文件: | 总2页 (文件大小:323K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Surface Mount Basic Pressure Sensors
Features
• 5 inH2O Full Sacale to 100 psi Full ScalePressures
• 0.5 % linearity
• Small LCC Footprint
• ROHS Compliant
Applications
• Medical Instrumentation
• Environmental Controls
• HVAC
General Description
The BASIC Serices of pressure sensors use a silicon micromachined (MEMS) pressure sensor in the most basic configuration. The
package is a ceramic surface mount configuration to provide the smallest footprint possible. Best temperature compensation is
realized when the sensor has a constant current excitation. This series is intended for use with non-corrosive, non-ionic working fluids
such as air, dry gases and the like. Specifications are written for constant voltage of 3.0 volts. The output of the device is ratiometric to
the supply voltage.
Equivalent Circuit
Physical Dimensions
Vs
PART MARKING
L05G - 5 inH2O
L10G - 10 inH2O
001G - 1 PSIG
LP Package
005G - 5 PSIG
-Out
+Out
015G - 15 PSIG
015A - 15 PSIA
030G - 30 PSIG
060G - 60 PSIG
100G - 100 PSIG
Part Marking
Gnd
Solder pads are pre-tinned
7.62
.300 SQ.
Dimensions: inch [mm]
LF Package
3.81
.150
0.89
.035
PINOUT
Pin 1: Vs
Pin 2: +out
C
L
Pin 1
1.4
.055
3.68
.145
Pin 3: N.C. Reserved
Pin 4: N.C. Reserved
Pin 5: N.C. Reserved
Pin 6: N.C. Reserved
Pin 7: -out
0.89
2X .035
0.89
2X .035
2X
4.19
.165
Part Marking
Pin 8: Gnd
Approvals
MKT
DATE
MFG
As Is
DATE
ENG
DATE
QA
DATE
As Is
With Change
With Change
As Is
With Change
As Is
With Change
All Sensors
DS-0165 Rev C
Pressure Sensor Characteristics Maximum Ratings
Environmental Specifications
6 Vdc
270°C
Supply Voltage VS
Temperature Ranges
Operating
Lead Temperature
(soldering 2-4 sec.)
-25 to 85° C
-40 to 125° C
Storage
Humidity Limits
0 to 95% RH
(non condensing)
Standard Pressure Ranges
Sensitivity (1)
Ported
Non-ported
Nominal
Units
mV/inH2O
mV/inH2O
mV/PSI
Part Number
CSM-L05G-LP
CSM-L10G-LP
CSM-001G-LP
CSM-005G-LP
CSM-015G-LP
CSM-015A-LP
CSM-030G-LP
CSM-100G-LP
Part Number
CSM-L05G-LF
CSM-L10G-LF
CSM-001G-LF
CSM-005G-LF
CSM-015G-LF
CSM-015A-LF
CSM-030G-LF
CSM-100G-LF
Operating Pressure
Proof Pressure
3 PSI
Std Dev.
1.10
8.40
1.65
22.8
12.0
4.40
4.40
2.30
0.96
0 - 5 inH2O
0 - 10 inH2O
0 - 1 PSI
3 PSI
0.19
5 PSI
2.60
mV/PSI
0 - 5 PSI
15 PSI
1.50
mV/PSI
0 - 15 PSI
0 - 15 PSIA
0 - 30 PSI
0 - 100 PSI
45 PSI
0.58
mV/PSI
30 PSI
0.58
mV/PSI
100 PSI
200 PSI
0.30
mV/PSI
0.13
Common Performance Characteristic
Parameter (1)
Minimum
Nominal
Maximum
5.0
Units
mv
--
--
1.0
3
Offset Voltage
Temperature Effect on Offset (2)
Temperature Effect on Resistance (2,6)
Temperature Effect on Span (2,6)
Linearity error (4,6)
--
uV/V/°C
ppm/°C
ppm/°C
% FSS
% FSS
% FSS
kohms
kohms
% FSS
2300
-1700
--
2600
-2200
0.2
3300
-2700
0.5
Hysteresis error (6)
--
0.01
0.01
3.3
0.05
0.03
4.0
Position Sensitivity (BST-L10G-xx) (6)
Input Resistance (6)
--
2.7
2.7
--
Output Resistance (6)
3.3
4.0
Long term stability of span (3)
0.1
--
Specification Notes
note 1: All pArAmeters Are meAsured At 3.0 volt excitAtion, for the nominAl full scAle pressure And room temperAture unless otherwise specified. pressure meAsurements Are with
positive pressure to the single port configurAtion.
note 2: shift is relAtive to 25°c.
note 3: shift is within the first yeAr of operAtion.
note 4: meAsured At one-hAlf full scAle rAted pressure using best strAight line curve fit.
note 5: the spAn is the AlgebrAic difference between full scAle output voltAge And the offset voltAge.
note 6: pArAmeter is chArActerized And not 100% tested. minimum And mAximum vAlues indicAted As A design reference.
All Sensors reserves the right to make changes to any products herein. All Sensors does not assume any liability arising out of the application or use of any product or circuit described
herein, neither does it convey any license under its patent rights nor the rights of others.
DS-0165 Rev C
相关型号:
©2020 ICPDF网 联系我们和版权申明