WB10ZG-1250-U2-A-BAB1 [ASM-SENSOR]
Analog Output;型号: | WB10ZG-1250-U2-A-BAB1 |
厂家: | ASM GMBH |
描述: | Analog Output |
文件: | 总16页 (文件大小:1103K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
POSITAPE®
WB10ZG
Analog Output
Position sensor with measuring tape
• Measurement range up to 2000 mm
• Protection class IP65
• Stainless steel measuring tape
• Analog output
Outputs
U2 Voltage 0.5 ... 10 V
U8 Voltage 0.5 ... 4.5 V
Specifications
I1
Current 4 ... 20 mA, 3 wire
Resolution
Linearity
<0,05 mm
±0.10 % f. s. (standard); optional ±0.05 %
Magnetic absolute encoder
Sensing device
Material
Zinc diecast, aluminium, plastic and stainless steel;
Tape: stainless steel, 10 mm wide, 0.08 mm thick
Protection class
Connection
Shock
IP65 (with mating connector)
Connector M12, 5 pin
EN 60068-2-27:2010, 100 g/11 ms, 100 shocks
EN 60068-2-6:2008, 20 g 10 Hz-2 kHz, 10 cycles
-20 ... +85 °C
Vibration
Temperature range
Order code WB10ZG
BAB1
WB10ZG
Model name
Measurement range (in mm)
250 / 375 / 500 / 750 / 1000 / 1250 / 1500 / 2000
Output
U2
U8
I1
= 0.5 ... 10 V signal conditioner
= 0.5 ... 4.5 V signal conditioner
= 4 ... 20 mA signal conditioner
Signal characteristics
A
= increasing (eg. 4 ... 20 mA)
D
= decreasing (eg. 20 ... 4 mA)
Linearity
L10
= ±0.10 % (standard)
L05
= ±0.05 % (optional, only for measurement ranges ≥1000 mm)
Connection
M12A5 = connector M12, 5 pin
Dust wiper
BAB1
Order code connector cable see page 12
Order example: WB10ZG - 1250 - U2 - A - L10 - M12A5 - BAB1
DB-WB10ZG-E-2013-11
www.asm-sensor.com
1/16
© ASM GmbH
POSITAPE®
WB10ZG
Analog output, programmable
Position sensor with measuring tape
• Measurement range up to 2000 mm
• Protection class IP65
• Stainless steel measuring tape
• Analog output, programmable
Output
U2/PMU
U8/PMU
I1/PMU
Voltage 0.5 ... 10 V, programmable
Voltage 0.5 ... 4.5 V, programmable
Current 4 ... 20 mA, 3 wire, programmable
Specifications
Resolution
Linearity
<0,05 mm
±0.10 % f. s. (standard); optional ±0.05 %
Magnetic absolute encoder
Sensing device
Material
Zinc diecast, aluminium, plastic and stainless steel;
Tape: stainless steel, 10 mm wide, 0.08 mm thick
Protection class
Connection
Shock
IP65 (with mating connector only)
Connector M12, 5 pin
EN 60068-2-27:2010, 100 g/11 ms, 100 shocks
EN 60068-2-6:2008, 20 g 10 Hz-2 kHz, 10 cycles
-20 ... +85 °C
Vibration
Temperature range
Order code WB10ZG
BAB1
WB10ZG
Model name
Measurement range (in mm)
250 / 375 / 500 / 750 / 1000 / 1250 / 1500 / 2000
Output
U2/PMU
U8/PMU
I1/PMU
= 0.5 ... 10 V signal conditioner, programmable
= 0.5 ... 4.5 V signal conditioner, programmable
= 4 ... 20 mA signal conditioner, programmable
Signal characteristics
A
= increasing (eg. 4 ... 20 mA)
D
= decreasing (eg. 20 ... 4 mA)
Linearity
L10
= ±0.10 % (standard)
L05
= ±0.05 % (optional, only for measurement ranges ≥1000 mm)
Connection
M12A5
= Connector M12, 5 pin
Dust wiper
BAB1
Order code connector cable see page 13
Order example: WB10ZG - 2000 - U2/PMU - A - L10 - M12A5 - BAB1
DB-WB10ZG-E-2013-11
www.asm-sensor.com
2/16
© ASM GmbH
POSITAPE®
WB10ZG
Digital Output SSI
Position sensor with measuring tape
• Measurement range up to 2000 mm
• Protection class IP65
• Stainless steel measuring tape
• Digital output SSI
Outputs
Synchronous serial interface (SSI)
up to 10 µm
Specifications
Resolution
Linearity
±0.10 % f. s. (standard); optional ±0.05 %
Magnetic absolute encoder
Sensing device
Material
Zinc diecast, aluminium and plastic
Tape: stainless steel, 10 mm wide, 0.08 mm thick
Protection class
Connection
Shock
IP65 (with mating connector only)
Connector M12, 8 pin
EN 60068-2-27:2010, 100 g/11 ms, 100 shocks
EN 60068-2-6:2008, 20 g 10 Hz-2 kHz, 10 cycles
-20 ... +85 °C
Vibration
Temperature range
Order code WB10ZG
BAB1
WB10ZG
Model name
Measurement range (in mm)
1000 / 2000
Resolution (in µm)
10 / 50 / 100
Outputs
MSSI
= SSI synchronous serial interface
Linearity
L10
L05
= ±0.10% (standard)
= ±0.05% (optional)
Connection
M12A8
= Connector M12, 8 pin
Dust wiper
BAB1
Order code connector cable see page 14
Order example: WB10ZG - 2000 - 100 - MSSI - L10 - M12A8 - BAB1
DB-WB10ZG-E-2013-11
www.asm-sensor.com
3/16
© ASM GmbH
POSITAPE®
WB10ZG
Digital output CANopen
Position sensor with measuring tape
• Measurement range up to 2000 mm
• Protection class IP65
• Stainless steel measuring tape
• Digital output CANopen or CAN SAE J1939
Outputs
CANopen or CAN SAE J1939
setting via CAN Bus
Specifications
Resolution
Linearity
±0.10 % f. s. (standard); optional ±0.05 %
Magnetic absolute encoder
Sensing device
Material
Zinc diecast, aluminium, plastic and stainless steel;
Tape: stainless steel, 10 mm wide, 0.08 mm thick
Protection class
Connection
Shock
IP65 (with mating connector only)
Connector M12, 5 pin
EN 60068-2-27:2010, 100 g/11 ms, 100 shocks
EN 60068-2-6:2008, 20 g 10 Hz-2 kHz, 10 cycles
-20 ... +85 °C
Vibration
Temperature range
Order code WB10ZG
BAB1
WB10ZG
Model name
Measurement range (in mm)
1000 / 2000
Output
MCANOP = CANopen
MCANJ1939= CAN SAE J1939
Linearity
L10 = 0.10% (standard)
L05 = 0.05% (optional)
Connection
M12/CAN = Connector M12, 5 pin
Dust wiper
BAB1
Order code connector cable see page 15
Order example: WB10ZG - 2000 - MCANOP - L10 - M12/CAN - BAB1
DB-WB10ZG-E-2013-11
www.asm-sensor.com
4/16
© ASM GmbH
POSITAPE®
WB10ZG
Dimensions
Outline drawing WB10ZG
up to 1000 mm
38,5 [1.516]
4x M5-8 [.315] tief / deep
J
38,5 [1.516]
94,5 [3.720]
M12-Stecker /
M12-connector
J ( 1,5 : 1 )
10 [0.394]
2,1 [0.083]
10 [0.394]
13 [0.512]
28,5 [1.122]
Dimensions in mm [inch]
Dimensions informative only.
For guaranteed dimensions consult factory.
DB-WB10ZG-E-2013-11
www.asm-sensor.com
5/16
© ASM GmbH
POSITAPE®
WB10ZG
Dimensions
Outline drawing WB10ZG
1250 / 1500 / 2000 mm
38,5 [1.516]
4x M5-8 [.315] tief / deep
J
38,5 [1.516]
94,5 [3.720]
M12-Stecker /
M12-connector
J ( 1,5 : 1 )
10 [0.394]
2,1 [0.083]
10 [0.394]
13 [0.512]
28,5 [1.122]
Dimensions in mm [inch]
Dimensions informative only.
For guaranteed dimensions consult factory.
DB-WB10ZG-E-2013-11
www.asm-sensor.com
6/16
© ASM GmbH
POSITAPE®
U2, U8 and I1
Analog Outputs
Excitation voltage
Excitation current
10 ... 36 V DC
U2
typ. 20 mA at 24 V DC
typ. 20 mA at 24 V DC
max. 60 mA
Voltage output
0.5 ... 10 V
Output voltage
Output current
Measuring rate
Stability (temperature)
Protection
0,5 ... 10 V DC
2 mA max.
1 kHz standard
±50 x 10-6/°C f.s. (typical)
Reverse polarity, short circuit
See specification of the respective sensor
EN 61326-1:2013
Operating temperature
EMC
Excitation voltage
Excitation current
10 ... 36 V DC
U8
typ. 17 mA at 24 V DC
typ. 32mA at 12 V DC
max. 60 mA
Voltage output
0.5 ... 4.5 V
Output voltage
Output current
Measuring rate
Stability (temperature)
Protection
0,5 ... 4,5 V DC
2 mA max.
1 kHz standard
±50 x 10-6/°C f.s. (typical)
Reverse polarity, short circuit
See specification of the respective sensor
EN 61326-1:2013
Operating temperature
EMC
Excitation voltage
Excitation current
10 ... 36 V DC
I1
typ. 36 mA at 24 V DC
typ. 70 mA at 12 V DC
max. 100 mA
Current output
4 ... 20 mA, 3 wire
Load RL
500 Ω max.
Output current
Measuring rate
Stability (temperature)
Protection
4 ... 20 mA
1 kHz standard
±50 x 10-6/°C f.s. (typical)
Reverse polarity, short circuit
See specification of the respective sensor
EN 61326-1:2013
Operating temperature
EMC
Output signals
Excitation +
U2
U8
I1
Signal +
GND
View to sensor
connector
Output signal
Connector
Cable wire
color
pin
Signal wiring/
connection
Excitation +
Signal
1
2
3
4
5
brown
white
blue
GND
Do not connect!
Do not connect!
black
(grey)
DB-WB10ZG-E-2013-11
www.asm-sensor.com
7/16
© ASM GmbH
POSITAPE®
U2/PMU, U8/PMU and I1/PMU
Analog output, programmable
Excitation voltage
10 ... 36 V DC
U2/PMU
Voltage output
Excitation current
typ. 20 mA at 24 V DC, typ. 38 mA at 12 V DC,
max. 60 mA
0.5 ... 10 V
Output voltage
Output current
Measuring rate
Stability (temperature)
Protection
0,5 ... 10 V DC
2 mA max.
1 kHz standard
±50 x 10-6/°C f.s. (typical)
Reverse polarity, short circuit
See specification of the respective sensor
EN 61326-1:2013
Operating temperature
EMC
Excitation voltage
Excitation current
10 ... 36 V DC
U8/PMU
Voltage output
0.5 ... 4,5 V
typ. 17 mA at 24 V DC, typ. 32 mA at 12 V DC,
max. 60 mA
Output voltage
Output current
Measuring rate
Stability (temperature)
Protection
0,5 ... 4,5 V DC
2 mA max.
1 kHz standard
±50 x 10-6/°C f.s. (typical)
Reverse polarity, short circuit
See specification of the respective sensor
EN 61326-1:2013
Operating temperature
EMC
Excitation voltage
Excitation current
10 ... 36 V DC
I1/PMU
Current output
4 ... 20 mA, 3 wire
typ. 36 mA at 24 V DC, typ. 70 mA at 12 V DC,
max. 100 mA
Load RL
500 Ω max.
Output current
Measuring rate
Stability (temperature)
Protection
4 ... 20 mA
1 kHz standard
±50 x 10-6/°C f.s. (typical)
Reverse polarity, short circuit
See specification of the respective sensor
EN 61326-1:2013
Operating temperature
EMC
Output signals
Excitation +
Signal +
U2/PMU
U8/PMU
I1/PMU
GND
SPAN/ZERO
)
Signal
Connector
Cable wire
View to sensor
connector
Signal wiring/
connection
pin
color
Excitation +
Signal
1
2
3
4
5
brown
white
blue
GND
Do not connect!
SPAN/ZERO
black
grey
Option -PMU
Programming of the start and end value by the customer
Teach-In of start and end value for the options U2/PMU, I1/PMU, U8/PMU is provided by a binary signal SPAN/ZERO. At
the start position connect signal SPAN/ZERO for a period of 2 … 3 seconds to GND via push button. At the end position
connect signal SPAN/ZERO for a period of 5 … 6 seconds to GND via a push button. The teached positions will be stored
non-volatile.
To reset the sensor to factory default signal ZERO/END must be connected to ground while powering up the sensor for
2 … 3 seconds.
DB-WB10ZG-E-2013-11
www.asm-sensor.com
8/16
© ASM GmbH
POSITAPE®
MSSI
SSI Output
Interface
EIA RS-422
8 ... 36 V DC
MSSI
Synchronous serial SSI
Excitation voltage
Excitation current
typ. 19 mA at 24 V DC, typ. 35 mA at 12 V DC,
80 mA max.
Clock frequency
Code
100 kHz ... 500 kHz
Gray-Code, continuous progression, 24 bit
20 µs min.
±50 x 10-6 / °C f.s. (typical)
See specification of the respective sensor
Short circuit
Delay between pulse trains
Stability (temperature)
Operating temperature
Protection
EMC
EN 61326-1:2013
Data format
(train of 26 pulses)
Recommended
DATA
processing circuit
DATA
CLOCK
CLOCK
Note:
Cable length
Baud rate
Transmission rate
Extension of the cable length will reduce
the maximum transmission rate.
50 m
100-400 kHz
100-300 kHz
100 m
View to sensor
connector
Signal name
Connector pin
Signal wiring/
connection
Excitation +
1
2
3
4
5
6
7
8
Excitation GND
CLOCK
CLOCK
DATA
DATA
-
-
DB-WB10ZG-E-2013-11
www.asm-sensor.com
9/16
© ASM GmbH
POSITAPE®
MCANOP
Output CANopen
Communication profile
CANopen CiA 301 V 4.02, Slave
MCANOP
CANopen
Encoder profile
Error Control
Node ID
Encoder CiA 406 V 3.2
Node Guarding, Heartbeat, Emergency Message
Adjustable via LSS; default: 127
PDO
3 TxPDO, 0 RxPDO, no linking, static mapping
PDO Modes
Event-/Time triggered, Remote-request,
Sync cyclic/acyclic
SDO
1 server, 0 client
2 cams
CAM
Certified
Yes
Transmission rates
50 kbit to 1 Mbit, adjustable via LSS;
default: 125 kbit
Bus connection
M12 connector, 5 pins
120Ω adjustable by the customer
No
Integrated bus terminating resistor
Bus, galvanic isolated
Excitation voltage
Excitation current
8 ... 36 V DC
Specifications
typ. 20 mA at 24 V
typ. 40 mA at 12 V
max. 80 mA
Measuring rate
Stability (temperature)
Repeatability
1 kHz (asynchronous)
±50 x 10-6 / °C f.s.
1 LSB
Operating temperature
Protection
See specification of the respective sensor
Reverse polarity, short circuit
1 kV (V AC, 50 Hz, 1 min.)
EN 61326-1:2013
Dielectric strength
EMC
View to sensor
connector
Signal name
Connector pin no.
Signal wiring/
connection
Shield
1
2
3
4
5
Excitation +
GND
CAN-H
CAN-L
DB-WB10ZG-E-2013-11
www.asm-sensor.com
10/16
© ASM GmbH
POSITAPE®
MMCANJ1939
Output CAN SAE J1939
CAN specification
ISO 11898, Basic and Full CAN 2.0 B
24V-compliant, not isolated
SAE J1939
MCANJ1939
CAN SAE J1939
Transceiver
Communication profile
Baud rate
250 kbit/s
Internal temination resistor
Address
120 Ω adjustable by the customer
Default 247d, configurable
Arbitrary address capable
1
Yes
NAME Fields
Industry group
Vehicle system
Vehicle system instance
Function
0
Global
7Fh (127d)
Non specific
0
FFh (255d)
Non specific
Function instance
ECU instance
0
0
Manufacturer
145h (325d)
0nnn
Manufacturer ID
Identity number
Serial number 21 bit
Configuration data
PGN EF00h
PGN FFnnh
Proprietary-A
(PDU1 peer-to-peer)
Parameter Group
Numbers (PGN)
Process data
Proprietary-B
(PDU2 broadcast);
nn Group Extension (PS)
configurable
Excitation voltage
Excitation current
8 ... 36 V DC
Specifications
typ. 20 mA at 24 V
typ. 40 mA at 12 V
max. 80 mA
Measuring rate
Stability (temperature)
Repeatability
1 kHz (asynchronous)
±50 x 10-6 / °C f.s.
1 LSB
Operating temperature
Protection
See specification of the respective sensor
Reverse polarity, short circuit
1 kV (V AC, 50 Hz, 1 min.)
EN 61326-1:2013
Dielectric strength
EMC
View to sensor
connector
Signal name
Connector pin no.
Signal wiring /
connection
Shield
1
2
3
4
5
Excitation +
GND
CAN-H
CAN-L
DB-WB10ZG-E-2013-11
www.asm-sensor.com
11/16
© ASM GmbH
POSITAPE®
Accessories
Connectors
The 4-lead shielded cable is supplied with a
mating 4-pin 90° M12 connector at one end and
4 wires at the other end. Available lengths are
2 m, 5 m and 10 m. Wire: cross sectional area
0.34 mm2.
Connector cable
M12, 4 pin
Suitable for 5-pin
sensor connectors
Order code:
KAB - XM - M12/4F/W - LITZE
IP69K:
KAB - XM - M12/4F/W/69K - LITZE
Length in m
The 4-lead shielded cable is supplied with a
mating 4-pin M12 connector at one end and
4 wires at the other end. Available lengths are
2 m, 5 m and 10 m. Wire: cross sectional area
0.34 mm2.
Connector cable
M12, 4 pin
Suitable for 5-pin
sensor connectors
Order code:
KAB - XM - M12/4F/G - LITZE
IP69K:
KAB - XM - M12/4F/G/69K - LITZE
Length in m
Connector pin / cable color
Signal wiring
M12, 4 pin
1
2
3
4
brown
white
blue
black
DB-WB10ZG-E-2013-11
www.asm-sensor.com
12/16
© ASM GmbH
POSITAPE®
Accessories
Connectors
The 5-lead shielded cable is supplied with a
mating 5-pin 90° M12 connector at one end and
5 wires at the other end. Available lengths are
2 m, 5 m and 10 m. Wire: cross sectional area
0.34 mm2.
Connector cable
M12, 5 pin
Order code:
KAB - XM - M12/5F/W - LITZE
IP69K:
KAB - XM - M12/5F/W/69K - LITZE
Length in m
The 5-lead shielded cable is supplied with a
mating 5-pin M12 connector at one end and 5
wires at the other end. Available lengths are 2
m, 5 m and 10 m. Wire: cross sectional area
0.34 mm2.
Connector cable
M12, 5 pin
Order code:
KAB - XM - M12/5F/G - LITZE
IP69K:
KAB - XM - M12/5F/G/69K - LITZE
Length in m
Connector pin / cable color
Signal wiring
M12, 5 pin
1
2
3
4
5
brown
white
blue
black
grey
DB-WB10ZG-E-2013-11
www.asm-sensor.com
13/16
© ASM GmbH
POSITAPE®
Accessories
Connectors
The 8-lead shielded cable is supplied with a
mating 8-pin 90° M12 connector at one end
and 8 wires at the other end. Available lengths
are 2 m, 5 m and 10 m. Wire: cross sectional
area 0.25 mm².
Connector cable
M12, 8 pin
Order code:
KAB - XM - M12/8F/W - LITZE
KAB - XM - M12/8F/W/69K - LITZE
IP69K:
Length in m
The 8-lead shielded cable is supplied with a
mating 8-pin M12 connector at one end and
8 wires at the other end. Available lengths are
2 m, 5 m and 10 m. Wire: cross sectional area
0.25 mm².
Connector cable
M12, 8 pin
Order code:
KAB - XM - M12/8F/G - LITZE
KAB - XM - M12/8F/G/69K - LITZE
IP69K:
Length in m
Connector pin / cable color
Signal wiring
M12, 8 pin
1
2
3
4
5
6
7
8
white
brown
green
yellow
grey
pink
blue
red
DB-WB10ZG-E-2013-11
www.asm-sensor.com
14/16
© ASM GmbH
POSITAPE®
Accessories
Connectors
The 5-lead shielded cable is supplied with a
female 5-pin M12 connector at one end and
a male 5-pin M12 connector at the other end.
Available lengths are 0.3, 2, 5 and 10 m.
Connector/bus cable
M12, 5 pin
CAN bus
Order code:
KAB - XM - M12/5F/G - M12/5M/G - CAN
IP69K: KAB - XM - M12/5F/G/69K - M12/5M/G/69K - CAN
Length in m
T-piece for bus cable
M12, 5 pin
CAN bus
Order code:
KAB - TCONN - M12/5M - 2M12/5F - CAN
Terminating
resistance
5 pin M12
CAN bus
Order code:
KAB - RTERM - M12/5M/G - CAN
DB-WB10ZG-E-2013-11
www.asm-sensor.com
15/16
© ASM GmbH
POSITAPE®
Accessories
Tape pulley
Tape pulley WBR1
Order code:
WBR1
40 [1.575]
40,4 [1.591]
60 [2.362]
7,5 [0.295]
2x 5,5
7,5 [0.295]
28 [1.102]
45 [1.772]
Dimensions in mm [inch]
Dimensions informative only.
For guaranteed dimensions consult factory.
DB-WB10ZG-E-2013-11
www.asm-sensor.com
16/16
© ASM GmbH
相关型号:
©2020 ICPDF网 联系我们和版权申明