ADN30-24-3PM [ASTEC]
120-960 Watts; 120-960瓦型号: | ADN30-24-3PM |
厂家: | Astec America, Inc |
描述: | 120-960 Watts |
文件: | 总2页 (文件大小:378K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Total Power: 120 - 960 Watts
Input Voltage: 1Ø or 3Ø 380-480 VAC
# of Outputs: One
120-960 Watts
ADN Series
3-Phase
Electrical Specs
Input
Nominal voltage
Power factor (PFC)
AC Input range
DC Input range
Frequency
380-480 VAC
EN61000-3-2
340-576 VAC
450-820 VDC
47 - 63 Hz, 500 Hz
Phase
1Ø or 3Ø on 5, 10 & 20A* models.
30A & 40A models are 3Ø only.
Output
Nominal voltage
Holdup time
Tolerance
24V (22.5 - 28.5 VDC Adj.)
>20ms at full load (25°C)
< 2% overall
(combination line/load/time/temp)
<0.5%
<0.5%
<1%
24.5V 1%
Special Features
Line regulation
Load regulation
Time & temp. drift
Initial voltage setting
Ripple
•Complies with EN61000-3-2
•DC OK Signal (indicator)
•Adjustable Voltage
•Industrial grade design
(no derating to 60°C)
•User-friendly front panel
•Single phase input available
•Highly efficient >90% switching technology
•High MTBF and reliability
•Peak current capability 2x rated
current for 2 seconds
<50mVpp
Parallel Operation
Current limit (fold forward)
constant power
User selectable
10A, 20A, 30A
40A
Active single wire parallel
Over voltage protection >30.5 <33 VDC
*On 20A unit, derate to 75% when operating 1Ø.
•Three year warranty
Safety
EMC
Emissions
EN500081-1, -2 Class B EN55011, EN55022
Radiated and Conducted including Annex A.
Immunity
EN50082-1, -2; EN61000-4-2, Level 4,
EN61000-4-3 Level 3, EN61000-4-6 Level 3;
EN61000-4-4 Level 4 input and Level 3 output;
EN61000-4-5 Isolation Class 4, EN61000-4-11;
Transient resistance according to VDE
0160/W2 over entire load range.
Environmental
Storage/shipment -25°C to +85°C
Operating
-10°C to 60°C
(convection)
(derate to 50% at +70°C)
Approvals
Protection
CB Scheme, EN60950; EN50178; EN60204;
UL508 Listed, cULus; UL60950, cRUus, CE (LVD
73/23 & 93/68/EEC) EN61000-3-2, IEC 60079-
15 Class 1, Zone 2 hazardous location, Groups
IIA, IIB, IIC w/T3 temp class up to 60°C
Ambient.
Humidity
<90% RH noncondensing
per IEC 68-2-2, 68-2-3
IP20 (EN60529), protection
from moisture & conden-
sation
Class 1 (IEC536), degree of protection
SELV rated per EN60950
Note: Derate output to 50% when unit is
mounted sideways or front side up.
190
Technical Support: (888) 41ASTEC or (407) 241-2752
Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662
rev 03.25.05
ASIA
EUROPE
AMERICAS
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Ordering Information
Model
Weight
Power
Input Voltage
Current
ADN5-24-3PM
1.7lbs (730g)
120W
240W
480W
720W
960W
380-480VAC
380-480VAC
380-480VAC
380-480VAC
380-480VAC
5A
ADN10-24-3PM 2.16lbs (980g)
ADN20-24-3PM 3.97lbs. (1800g)
ADN30-24-3PM 4.0lbs (2000g)
ADN40-24-3PM 6.6lbs (3300g)
10A
20A
30A
40A
Dimensions - inches (mm)
Catalog Number
ADN5-24-3PM
H
W
D
4.88 (124)
2.91 (73)
4.55 (116)
Dimensions - inches (mm)
W
Catalog Number
H
D
ADN10-24-3PM 4.88 (124)
ADN20-24-3PM 4.88 (124)
ADN30-24-3PM 4.88 (124)
3.50 (89)
5.90 (150)
9.72 (247)
4.55 (116)
4.55 (116)
4.55 (116)
4.55 (116)
ADN40-24-3PM 4.88 (124) 11.10 (282)
Installation
Internally fused.
Fusing
-Input
Outputs are capable of providing high currents for short periods of time for inductive load startup or switching.
Fusing may be required for wire/loads if 2x Nominal O/P current rating cannot be tolerated. Continuous current
overload allows for reliable fuse tripping.
-Output
Simple snap-on system for DIN Rail TS35/7.5 or TS35/15 or chassis-mounted (optional screw mounting set SDN-
PMBRK2 required).
Mounting
Input: IP20-rated screw terminals, connector size range: 16-10 AWG (1.5-6 mm2) for solid conductors. 16-12
AWG (0.5-4 mm2) for standard conductors. Output: Two connectors per output, connector size range:
16-10 AWG (1.5 - 6mm2) for solid conductors.
Connections
Case
Fully enclosed metal housing with fine ventilation grid to keep out small parts.
25mm above and below
25 mm left and right
15 mm in front
70 mm above and below
25 mm left and right
15 mm in front
-Free Space
www.astecpower.com
191
相关型号:
©2020 ICPDF网 联系我们和版权申明