APC12M03 [ASTEC]
40 Watts; 40瓦型号: | APC12M03 |
厂家: | Astec America, Inc |
描述: | 40 Watts |
文件: | 总2页 (文件大小:183K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Total Power:
Input Voltages:
No. of Outputs:
40 Watts
1.8 to 13 V
Single
40 Watts
APC12 (12 Amps)
Preliminary
Electrical Specs
Input
Input range
Input Surge
1.8-6.0VDC and 5.6-13.0VDC
7V for 03 version
14V for 08 version
Efficiency
3V3 @ 92% (Typ)
Control
Enable
TTL compatible
(positive enable)
Output
Regulation
(Line, Load, Temp)
<3%
Special Features
Ripple and noise1
75mV - (2.5V to 3.6V Output)
50mV - (0.9V to 2.4V Output)
•
•
•
Point of load (POL) applications
High efficiency, 3.3V @ 92% (Typ)
-40°C to +85°C Ambient operating
temperature
Open Frame SMT
Positive enable function
Output voltage
adjust range
Transient Response
0.9V to 3.6V
typical 5% deviation with
50% to 75% full load
650 µS recovery
•
•
•
•
•
Low output ripple and noise
Regulation to zero load
Programmable Output from 0.9V to 3.6V
(External Trim Resistor or Voltage Source)
Fixed frequency switching (200 kHz)
Isolation
Non-Isolated module
Specifications subject to change without notice.
•
Environmental
Operating temperature
-40°C to +85°C
Storage temperature: -40°C to +125°C
MTBF: >1 million hours
Safety
UL, cUL 609500 Recognized
TUV
EN60950 Licensed
REV C:JANUARY 03
2
North America (USA): 1-888-41-ASTEC
Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662
EUROPE
ASIA
AMERICAS
Astec House, Waterfront Business Park
Merry Hill, Dudley
Units 2111-2116, Level 21
Tower1, Metroplaza
5810 Van Allen Way
Carlsbad, CA 92008
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
FFaaccssiimmiillee:: 4444((11338844))884433--335555
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 760-930-4600
Facsimile: 760-930-0698
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Ordering Information
Input
Voltage
Output
Voltage
Efficiency
Full Load
Model
Number
1.8V-6.0V
1.8V-6.0V
1.8V-6.0V
1.8V-6.0V
1.8V-6.0V
1-8V-6.0V
1-8V-6.0V
0.9V @ 12A
1.2V @ 12A
1.5V @ 12A
1.8V @ 12A
2.5V @ 12A
3.3V @ 12A
0.9V @ 12A
76% (Typ)1
81% (Typ
86% (Typ)
87% (Typ)
90% (Typ)
92% (Typ)
76% (Typ)
APC12J03
APC12K03
APC12M03
APC12Y03
APC12G03
APC12F03
APC12J03-93
5.0V-13.0V
5.0V-13.0V
5.0V-13.0V
5.0V-13.0V
5.0V-13.0V
5.0V-13.0V
5.0V-13.0V
0.9V @ 12A
1.2V @ 12A
1.5V @ 12A
1.8V @ 12A
2.5V @ 12A
3.3V @ 12A
0.9V @ 12A
73% (Typ)
77% (Typ)
81% (Typ)
82% (Typ)
87% (Typ)
90% (Typ)
74% (Typ)
APC12J08
APC12K08
APC12M08
APC12Y08
APC12G08
APC12F08
APC12J08-93
Note:
1. Typical Efficiency is measured at full load, mid range input, and Tc=25 Deg C
2. “-9MA” (suffix) - Output Trim, PGood and Parallel Options available on all modules
3. “-9” (suffix) - Output Trim option available on 0.9V version.
Mechanical Dimensions
Notes:
1. 20 MHz bandwidth. External 56 uF (ESR < 75mohm) for 03 device
and 100uF (ESR < 40mohm) for 08 device across Vout and Gnd.
2. Meet FCC class A and ETS300-386-1 requirements for conducted
noise. Consult Factory for filtering information to meet FCC class
B,
VDE or EIC specifications.
3. All specifications are typical at nominal line, full load, and 25°C
unless otherwise noted.
4. All specifications subject to change without notice. Mechanical
drawings are for reference only
5. Technical Reference Notes should be consulted for detailed
information
6. Warranty: 1yr
Pad Layout
Top View of Board
Optional Pins:
PGood - Power Good Logic Signal
P - Active Current Share Pin
Trim - Trim Pin (0.9 to 3.6V)
REVC: JANUARY 03
www.astecpower.com
3
相关型号:
APC12MK03-9J
Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output
ASTEC
APC12MK03-9MAJ
Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output
ASTEC
APC12MK08-9J
Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output
ASTEC
APC12MK08-9MAJ
Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output
ASTEC
APC12Y03-9J
Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output
ASTEC
APC12Y03-9MAJ
Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output
ASTEC
APC12Y08-9J
Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output
ASTEC
APC12Y08-9MAJ
Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output
ASTEC
APC12_02
Non-Isolated DC/DC Power Module Tiny SMT Footprint - 1.8V-12V Input, 0.9V to 3.6V Output
ASTEC
©2020 ICPDF网 联系我们和版权申明