VS1-B2-H332-00 [ASTEC]
1000 - 2500 Watts; 1000至2500年瓦
| 型号： | VS1-B2-H332-00 |
| 厂家： | 
Astec America, Inc |
| 描述： | 1000 - 2500 Watts |
| 文件： | 总8页 (文件大小：2912K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1000 - 2500 Watts
VS Series
Special Features
VS1-B2-H522-00
1100W total
• Power factor correction
• IEC 555-2 harmonic distortion compliance
• CISPR 22, EN55022 Level B
conducted / radiated EMI
• EN61000 immunity standards
• European CE Mark
• Current share on all outputs
• Remote sense on all outputs
• Overload protection on all outputs
• Voltage adjustment on all outputs
• Margining on all outputs
• AC-OK-signal (logics “1” or “0”)
• Global DC OK (logics “1” or “0”)
• DC-OK signal and status indicator LED-on all outputs
• Global and individual module inhibits/enable
• 3 year warranty
VS3-D2-C2-20
1200W total
• 2500 W with 3-phase input
VS6-L2-00
1500W total
Environmental
Operating temperature: -10°C to 50°C
(derate each output linearly to 60% at 70°C)
40°C max. for reverse air (option #1)
Shock/Vibration: Mil-Hdbk 810E
Humidity: 95% non-condensing
Storage temperature: -55°C to +85°C
Temperature coefficient: 0.02% per °C
Cooling: Internal DC fan 24V
VS8-L9-D9-20
2500W total (case limit)
Safety
VS4/9
2000 - 2500 W
UL
UL60950-1
E133211
CSA
VDE
CB
CSA C22.2 No. 60950-1-03
EN60950
Certificate and report
Mark
CE
1
Technical Support: (888) 41-ASTEC or (407) 241-2752
Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662
69-825-410 Rev C
12.01.04
ASIA
EUROPE
AMERICAS
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
Electrical Specs
Output
Input
Adjustment range
±10% minimum
±4-6% nominal
Fuse rating
600 V / 25 A (internal)1Ø
250 V / 20 A (internal)3Ø
Margining
Input voltage
85-264 VAC 1Ø
VS1, VS3 & VS4
(See operating curve)
180-264 VAC 3Ø
VS6, VS8 & VS9
Line/load reg
Ripple
0.2% or 5 mV max.
RMS: 0.1% or 10 mV
P-P: 1.0% or 50 mV
Bandwidth limited to 20 MHz
Dynamic response
2% or 100 mV with 25% load step
(any output)
Frequency
47 to 440 Hz
40 A peak max.
75% - 82%
Inrush current
Efficiency
Recovery time
To within 1% in <300 µsec
Overvoltage protection
2-5 V 122% to 134% of output voltage;
12-48 V 110% to 120%; recycle AC
Power factor
0.99 typical
(0.9 on VS6, VS8 & VS9)
Overload protection
Main: 105% to 120% of rated current
Auxiliaries:105% to 140%
Turn-on time
EMI-filter
AC / 1 sec;
Inhibit / 100 ms max.
Short circuit protection
Protected for continuous short circuit,
recovery automatic
CISPR 22, EN55022 Level B
conducted/radiated
Reverse voltage
protection
Leakage current
Holdover storage
2 mA max. at 240 VAC
100% of rated output current
20 ms min. / 40 ms typical
independent of VAC
Thermal protection
Each module thermally protected.
Input module: auto recovery. Output
modules; recycle AC.
AC-OK warning time
Loss of phase
>5 ms (power fail)
Remote sense
Up to 0.5 V - total drop
On VS6, VS8 & VS9, unit will
continue to operate with loss
of phase
Single wire parallel
Current share to 2% of total rated
current
Input Operating Curve
Switching frequency
200 KHz
2200
2000
1800
1600
1400
1200
1000
800
(900-1500 W module, 400 KHz)
DC OK
-2% to -6% of nominal
>1 Megohm
Output/Output isolation
600
400
200
0
INPUT AC VOLTAGE (VAC) @ 50/60Hz
www.astecpower.com
2
69-825-410 Rev C
12.01.04
Common Examples
and Specifications
Case size
1
3
4
6
8
9
= 5 inch, 2 slot, 1500 W max 1Ø
= 8 inch, 4 slot, 2000 W max 1Ø
= 11 inch, 6 slot, 2000 W max 1Ø
= 5 inch, 2 slot, 1500 W max 3Ø
= 8 inch, 4 slot, 2500 W max 3Ø
= 11 inch, 6 slot, 2500 W max 3Ø
Option Codes
0 = no options
1 = rear air exhaust (40°C max.)
3 = set unit for global enable
5 = options 1 & 3
USE ONLY-FOR
MODIFIED STANDARD,
CONSULT-FACTORY
(Same for Each Slot)
Indicates CE compliance
Output Module Code
Output Voltage Code
0 = 2V
1 = 3.3 V
2 = 5 V
3 = 12 V
4 = 15 V
5 = 24 V
6 = 28 V
7 = 36 V
Configuration Rules
Parallel Code
1. Omit digits that do not apply.
A = 300 W single 1 slot
B = 600 W single 1 slot
C = 900 W single 2 slots
D = 1200 W single 2 slots
E = 250 W dual 1 slot
F = 250 W triple 1 slot
G = 500 W dual 1 slot
H = 500 W triple 1 slot
K = 750 W single 1 slot
L = 1500 W single 2 slot
VS1 and VS6
available slots
2. a. Specify modules from lowest number
of outputs to highest.
b. If number of outputs are equal, specify
from highest to lowest power increments.
c. If power increments are equal, specify
from highest to lowest current.
3. All model configurations created using
this selection guide represent standard
products with standard availability and
lead times.
4. If slots are left empty, a blank panel will
be automatically installed.
J1
VS3 and VS8
available slots
N
J1
VS4 and VS9
available slots
8 = special voltage
(consult factory)
9 = 48 V
N
Parallel Codes
J1
0 = no parallel
1 = 1 & 2
2 = 2 & 3
Example
(more on next page):
VS 1 - K 2 - G 3 3 - 0 0 - CE
3 = 3 & 4
4 = 1 & 2 & 3
5 = 2 & 3 & 4
6 = 1 & 2 + 3 & 4
7 = 1 & 2 & 3 & 4
8 = 3 & 4 + 5 & 6
9 = 1 & 2 + 3 & 4 + 5 & 6
5 inch case
No options
(2 slots available)
Slot 1
Slot 2
No paralleling
1: 5V @ 150A 2: 12V @ 21A
3: 12V @ 20A
Output Current
Output Voltage
Identification
Module Identification
Output
Output
Voltage
A (1 slot)
300 W
Single
60 A
B (1 slot)
600 W
Single
120 A
C (2 slots)
900 W
Single
180 A
D (2 slots)
E, F (1 slot)
250 W Multi
Main Output
25 A
G, H (1 slot)
500 W Multi
Main Output
50 A
K (1 slot)
750 W
Single
150 A
L (2 slots)
Voltage
1200 W
Single
240 A
240 A
240 A
1500 W
Single
300 A
300 A
300 A
Code
0
1
2
2 V
3.3 V
5 V
60 A
60 A
120 A
180 A
25 A
50 A
150 A
120 A
180 A
25 A
50 A
150 A
3
4
5
12 V
15 V
24 V
25 A
50 A
40 A
25 A
75 A
100 A
80 A
50 A
10.5 A
8.3 A
5.3 A
21 A
16.6 A
10.5 A
62.5 A
50 A
31.2 A
125 A
100 A
62.4 A
20 A
60 A
12.5 A
37.5 A
6
7
9
28 V
36 V
48 V
10.7 A
8.3 A
6.3 A
21.4 A
16.6 A
12.5 A
32.1 A
24.9 A
18.75 A
42.8 A
33.2 A
25 A
4.5 A
N/A
N/A
9 A
N/A
N/A
26.7 A
20.8 A
15.6 A
53.4 A
41.6 A
31.2 A
Note: Increments of current not shown can be achieved by paralleling modules (add currents of each module selected).
Auxiliary Output Table: Output(s) 2 and/or 3 of Module
Voltage
Identification
Module Identification
Output
Voltage
Code
Output
Voltage
E
F
G
H
250 W Dual
Aux. Output
250 W Triple
Aux. Output
500 W Dual
Aux. Output
500 W Triple
Aux. Output
0
1
2
2 V
3.3 V
5 V
10 A
10 A
10 A
5 A
5 A
5 A
20 A
20 A
20 A
10 A
10 A
10 A
3
4
5
6
12 V
15 V
24 V
28 V
10 A
10 A
5 A
5 A
20 A
20 A
10 A
10 A
10 A
10 A
5 A
5 A
2.5 A
2.5 A
5 A
5 A
3
Technical Support: (888) 41-ASTEC or (407) 241-2752
Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662
69-825-410 Rev C
12.01.04
ASIA
EUROPE
AMERICAS
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
EXAMPLES
Examples of Model Numbers - SINGLE OUTPUTS
Voltage
Other Voltages
Available
2 V
3.3 V
5 V
12 V
15 V
24 V
28 V
36 V
Special
48 V
Total
Volts /
Size
Model
ID Code
Power
Amps
(H x W x L)
Number
600 W
5 V / 120 A
12 V / 62.5 A
5 V / 180 A
5 V / 240 A
2 V / 600 A
15 V / 100 A
5 V / 400 A
48 V / 52 A
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 8 x 11
5 x 5 x 11
5 x 8 x 11
5 x 8 x 11
VS1-B2-00
0
750 W
VS1-K3-00
1
900 W
VS1-C2-00
2
3
1200 W
1200 W
1500 W
2000 W
2500 W
VS1-D2-00
4
VS3-L0-L0-20
VS1-L4-00
5
6
VS3-D2-C2-20*
VS8-L9-D9-20 **
7
8 (consult factory)
9
*
D2 module derated to 1100 W (2000 W max.)
**D9 module derated to 1000 W (2500 W max )
Examples of Model Numbers - MULTIPLE OUTPUTS
Total
Power
Output
1
Output
2
Output
3
Output
4
Output
5
Output
6
Size
Model Number
500 W
5 / 50
12 / 10
12 / 10
12 / 21
12 / 21
15 / 16.6
15 / 16.6
2 / 120
12 / 10
12 / 10
12 / 21
12 / 21
12 / 10
15 / 16.6
15 / 16.6
12 / 21
12 / 21
2 / 120
12 / 20
2 / 240
12 / 21
12 / 21
12 / 21
12 / 21
3.3 / 120
12 / 10
12 / 10
12 / 10
12 / 10
15 / 10
15 / 10
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
VS1-H233-00
750 W
5 / 50
15 / 8.3
5 / 10
24 / 5
5 / 10
24 / 5
15 / 5
5 / 5
VS1-H233-F442-00
VS1-A2-H332-00
VS1-A2-H335-00
VS1-A2-H442-00
VS1-A2-H445-00
VS1-K2-B0-00
800 W
5 / 60
800 W
5 / 60
800 W
5 / 60
800 W
5 / 60
990 W
5 / 150
5 / 50
1000 W
1000 W
1100 W
1100 W
1100 W
1100 W
1100 W
1400 W
1400 W
1440 W
1600 W
1680 W
1700 W
1900 W
2000 W
2000 W
2500 W
12 / 10
12 / 10
12 / 20
12 / 10
12 / 10
15 / 10
15 / 10
12 / 20
12 / 10
15 / 16.6
15 / 16.6
15 / 10
5 / 10
24 / 5
24 / 5
VS1-H233-H445-00
VS1-H233-H425-00
VS1-B2-G33-00
VS1-B2-H332-00
VS1-B2-H233-10
VS1-B2-H442-00
VS1-B2-H445-00
VS3-C2-G33-00
VS3-C2-H332-00
VS3-D2-B0-00
VS3-B2-G23-G32-10
VS3-D2-D0-00
VS3-D2-G33-00
VS3-C2-G33-H245-00
VS3-L2-H332-00
VS3-D2-G33-H245-00
VS8-L2-B1-H334-00
5 / 50
5 / 120
5 / 120
5 / 170
5 / 120
5 / 120
5 / 180
5 / 180
5 / 240
5 / 170
5 / 240
5 / 240
5 / 180
5 / 300
5 / 240
5 / 300
5 / 10
5 / 10
24 / 5
5 / 10
5 / 20
12 / 21
12 / 20
12 / 20
12 / 10
12 / 20
12 / 21
5 / 50
5 / 10
5 / 60
12 / 10
15 / 10
24 / 5
24 / 5
15 / 10
15 / 10
Notes:
Electrical Characteristics
Pin Assignments
Single Output
PFC
1. DC OK minus 2 to 6% of nominal output voltage
J1 CONTROL CONNECTOR
J1 CONTROL CONNECTOR
(tracking).
Pin No.
J1-1
Function
Pin No.
J1-1
Function
+Remote Sense
AC OK Logic 1
AC OK Logic 0
Global DC OK/Conv Run Logic 1
Global DC OK/Conv Run Logic 0
Global DC OK/Conv Run/AC OK
Return
2. Inhibit & Enable are both TTL compatible.
J1-2
Remote Margin / V. Program
Remote Margin Hi
-Remote Sense / Margin Lo
DC OK / Conv Run Logic 1
Isolated Inhibit
DC OK / Conv Run / ISO Inh.
Return
Single Wire Parallel
Spare Pin
Spare Pin
J1-2
ISOLATED requires 2 mA source, typical.
J1-3
J1-3
J1-4
J1-4
3. DC OK/Converter Run denotes output voltage
is present and converters are running
(Or'ed signal configuration).
J1-5
J1-5
J1-6
J1-7
J1-6
J1-7
J1-8
J1-9
J1-10
Global Inhibit Logic 0*/ENA Logic '0'
Global Inhibit Logic 1*/ENA Logic '1'
Global Inhibit Return*ENA RTN
Global Isolated Inhibit
4. PFC LED: Red = Bulk DC bus voltage low;
J1-8
Green = Bulk DC OK.
J1-9
J1-10
Global Isolated Inhibit Return
5. Output LED: Red = Indicated output not
operating within tolerance;
* Changes to Enable with Option Code 3
Green = Indicated output operating within
tolerance.
Multiple Output
J2 CONTROL CONNECTOR
J1 CONTROL CONNECTOR
Pin No.
J2-1
Function
6. The 5 x 5 x 11 (VS1/6) case is power limited to
Pin No.
J1-1
Function
V1 +Remote Sense
V1 Remote Margin / V. Program
V1 Remote Margin Hi
V1 -Remote Sense / Margin Lo
V1 DC OK / Conv Run Logic 1
V1 Isolated Inhibit
V1 DC OK / Conv Run / ISO Inh.
Return
V1 Single Wire Parallel
V2 Single Wire Parallel
V3 Single Wire Parallel
V2 +Remote Sense
1500W max. See operating curve.
J2-2
V2 Remote Margin / V. Program
V2 Remote Margin Hi
J1-2
J2-3
7. The 5 x 8 x 11 case and 5 x 11 x 11 case (VS3/4)
are power limited to 2000W max. The VS8/9
cases are power limited to 2500W max.
J1-3
J2-4
V2 -Remote Sense / Margin Lo
V2 DC OK /Logic 1
J1-4
J2-5
J1-5
J2-6
V3 +Remote Sense
J1-6*
J1-7
J2-7
V3 Remote Margin / V. Program
V3 Remote Margin Hi
8. Specifications subject to change without
J2-8
notice.
J2-9
V3 -Remote Sense
V3 DC Good /Logic 1
J1-8
J2-10
9. Warranty: 3 yrs
J1-9
J1-10
* Inhibits off all the outputs within that module.
www.astecpower.com
4
69-825-410 Rev C
12.01.04
Drawings
VS1 & VS6 • 1000-1500 WATTS
5-inch Case Size (5” x 5” x 11”)
VS1
11.00 ± .05
.94
1.2
MAX
(279.31 ± 1.27)
23.89)
8-32 UNC-2B
Threaded Insert, 4 Places
Like Pattern Opposite Side
Max penetration: 0.150 (3.81)
Input
5.00 ± 0.05
Module
STD AIR FLOW
AC High
Neutral
Ground
5.00
Max
(127.03)
4.000 ± .020
Side
(101.60 ± .50)
J1
2.04 ± .05
(51.82 ± 1.27)
3.49 ± .05
(88.65 ± 1.27)
.500 ± .050
(12.70 ± 1.27)
6.750 ± .020
.750 ± .050
(171.45 ± .50)
(19.05 ± 1.27)
.27 ± .05
(6.86 ± 1.27)
8-32 UNC-2B
Threaded Insert,
4 Places
Max penetration:
0.150 (3.81)
Bottom
VS6
5.00 ± 0.05
Input
Module
AC Phase A
AC Phase B
AC Phase C
5.00
(127.03)
Max
6.750 ± .020
(171.45 ± .50)
AC Ground
N
Back
J1
2.04 ± .05
(51.82 ± 1.27)
3.49 ± .05
(88.65 ± 1.27)
.750 ± .050
(19.05 ± 1.27)
.500 ± .050
(12.70 ± 1.27)
4.000 ± .020
(101.60 ± .50)
NOTES (ALL MODELS)
1. Input: Barrier type. Three No. 6-32 B.H. screws (0.375” centers). For VS1, VS3 & VS4 additional GND CONN added for VS6, VS8 & VS9.
Max torque: 10 in-lbs (1.1 N-m).
2. Control connectors: (J1 and J2) 10 position Molex 90130-3210 housing, gold plated contacts. Mates with Molex 90142-0010 housing with
90119-2110 crimp contacts (Molex C - Grid III Series). Connector kit includes mating connector and 10 pins, Astec part #70-841-004.
3. Output terminals (A-300 W) (B-600 W) & (K-750 W) single modules: two (2) 10-32 UNF HEX HD BOLTS. Max. torque: 25 in-lbs (2.78 N-m).
4. Output terminals (E/F-250 W) & (G/H-500 W) dual/triple modules: Primary: two (2) 10-32 UNF HEX HD BOLTS. Max. torque: 25 in-lbs (2.78 N-m).
Secondary: barrier strip two (2) 6-32 UNC screws (0.375” centers) per output. Max torque: 10 in-lbs (1.1 N-m).
5. Output terminals (C-900 W) (D-1200 W) & (L-1500 W) single modules: four 5/16-18 x 5/8" hex head cap screws. Max. torque: 120 in-lbs
(13.35 N-m). Captive lock washer provided.
6. Chassis material: aluminum with chemical film coating.
7. Adjustment access: voltage, power fail, and overcurrent from front panel.
8. Bar code: code 39 extended.
9. Mounting for 5-inch & 8-inch case: four(4) 8-32 clinch nuts on three (3) surfaces.
Mounting for 11-inch case:
four (4) 8-32 clinch nuts on two (2) side surfaces &
six (6) 8-32 clinch nuts on bottom surface.
Max. penetration 0.150 inch (3.81). Max. torque: 15 in-lbs (1.67 N-m).
10. Additional support is recommended when unit is mounted in a suspended configuration.
Mounting clinch nuts are not designed to support the weight of the unit.
11. Fans: 5-inch case, (1) 4.5" dia, 112 CFM (no load), 49 dBA.
8-inch case, (1) 4.5" dia, 112 CFM (no load), 49 dBA; (2) 2.25” dia, 23 CFM (no load), 38 dBA.
11-inch case, (2) 4.5" dia, 112 CFM (no load), 49dBA
12. All dimensions are in inches (mm).
13. Specifications subject to change without notice.
5
Technical Support: (888) 41-ASTEC or (407) 241-2752
Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662
69-825-410 Rev C
12.01.04
ASIA
EUROPE
AMERICAS
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
8-inch Case Size (5” x 8” x 11”)
(18 lbs. / 8.2 kg. maximum)
DRAWINGS • VS3 & VS8 • 1000-2500 WATTS
VS3
11.00 ± .05
.94
1.2
Input
MAX
7.90 ± 0.05
(279.31 ± 1.27)
23.89)
8-32 UNC-2B
Module
(200.66 ± 1.27)
Threaded Insert, 4 Plac
Like Pattern Opposite S
Max penetration: 0.150
STD AIR FLOW
AC High
Neutral
Ground
5.00
MAX
(127.03)
Side
4.000 ± .020
(101.60 ± .50)
J1
2.04 ± .05
(51.82 ± 1.27)
3.49 ± .10
(88.65 ± 2.54)
4.94 ± .10
.500 ± .050
(125.48 ± 2.54)
(12.70 ± 1.27)
6.39 ± .10
6.750 ± .020
.750 ± .050
(162.31 ± 2.54)
(171.45 ± .50)
(19.05 ± 1.27)
.27 ± .05
AC Main Input
Bottom
Back
VS8
7.90 ± 0.05
(200.66 ± 1.27)
1.2
AC Phase A
AC Phase B
AC Phase C
6.750 ± .020
(171.450 ± .50)
8-32 UNC-2B
Threaded
5.00
MAX
Insert, 4 Places
Max penetration:
0.150 (3.81)
AC Ground
(127.03)
N
Input
Module
.750 ± .050
(19.05 ± 1.27)
J1
2.04 ± .05
(51.82 ± 1.27)
3.49 ± .10
(88.65 ± 2.54)
1.067 ± .050
(27.099 ± 1.270)
4.94 ± .10
5.750 ± .020
(125.48 ± 2.54)
(146.050 ± .508)
6.39 ± .10
(162.31 ± 2.54)
www.astecpower.com
6
69-825-410 Rev C
12.01.04
Drawings
VS4 & VS9 • 2000-2500 WATTS
11-inch Case Size (5” x 11” x 11”)
VS4
1.2
8-32 UNC-2B THREADED
INSERT, 6 PL
10.80 ±.20
274.32 ±5.04
(PFC)
AC HIGH
NEUTRAL
GROUND
~
N
S
L
S
L
S
L
S
L
S
L
S
L
6.750
171.450
±.02
±.50
O
T
O
T
O
T
O
T
O
T
O
T
5.00
127.0
MAX
P/F
.52
13.1
6
5
4
3
2
1
6
1
.750
±.05
19.050 ±1.270
J1
.33
8.3
2.04 ±.10
51.81 ±2.54
3.49 ±.10
88.64 ±2.54
1.067 ±.050
27.099 ±1.270
4.94 ±.10
125.47 ±2.54
5.750 ±.020
146.050 ±.508
6.39 ±.10
162.31 ±2.54
8.750 ±.020
222.25 ±.508
7.84 ±.10
199.14 ±2.54
9.29 ±.10
235.97 ±2.54
VS9
10.80 ±.20
274.32 ±5.04
±.05
11.00
279.31 ±1.27
1.2
.94
23.89
MAX
8-32 UNC-2B THREADED
INSERT, 4 PL
LIKE PATTERN OPPOSITE SIDE
(PFC)
AC Phase A
~
AC Phase B
N
S
L
S
L
S
L
S
L
S
L
S
L
AC Phase C
STD
O
T
O
T
O
T
O
T
O
T
O
T
5.00
127.0
AIR FLOW
FRONT AIR
EXHAUST
MAX
P/F
.52
13.1
6
5
4
3
2
1
6
1
±.02
±.50
4.00
101.60
OPTIONAL
REAR AIR
EXHAUST
J1
.33
8.3
2.04 ±.10
51.81 ±2.54
3.49 ±.10
88.64 ±2.54
4.94 ±.10
125.47 ±2.54
.50 ±.05
12.70
±1.27
6.39 ±.10
162.31 ±2.54
±.05
±1.27
6.75+.02
.75
19.05
-
171.45 +.50
-
7.84 ±.10
199.14 ±2.54
.27 ±.05
6.86 ±1.27
9.29 ±.10
235.97 ±2.54
7
Technical Support: (888) 41-ASTEC or (407) 241-2752
Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662
69-825-410 Rev C
12.01.04
ASIA
EUROPE
AMERICAS
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
Module Front Panels
www.astec.com
69-825-410 Rev C
12.01.04
153
相关型号：
VS1-B2-H442-00
1000 - 2500 WattsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ASTEC
VS1-B2-H442-00
VS SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
EMERSON-NETWO
VS1-B2-H445-00
1000 - 2500 WattsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ASTEC
VS1-B2-H445-00
VS SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
EMERSON-NETWO
VS1-B2-H522-00
1000 - 2500 WattsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ASTEC
VS1-B2-H522-00
VS SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
EMERSON-NETWO
VS1-C2-00
VS SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
EMERSON-NETWO
VS1-D2-00
VS SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
EMERSON-NETWO
VS1-H233-00
1000 - 2500 WattsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ASTEC
VS1-H233-00
VS SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
EMERSON-NETWO
VS1-H233-F442-00
1000 - 2500 WattsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ASTEC
VS1-H233-F442-00
VS SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
EMERSON-NETWO
©2020 ICPDF网 联系我们和版权申明