ATF16LV8C-10XL [ATMEL]
Flash PLD, 10ns, CMOS, PDSO20, 4.40 MM, PLASTIC, MO-153, TSSOP-20;型号: | ATF16LV8C-10XL |
厂家: | ATMEL |
描述: | Flash PLD, 10ns, CMOS, PDSO20, 4.40 MM, PLASTIC, MO-153, TSSOP-20 光电二极管 |
文件: | 总15页 (文件大小:212K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Features
• 3.0V to 5.5V Operation
• Industry-standard Architecture
– Emulates Many 20-pin PALs®
– Low-cost Easy-to-use Software Tools
• High-speed
– 10 ns Maximum Pin-to-pin Delay
• Ultra-low Power
– 5 µA (Max) Pin-controlled Power-down Mode Option
– Typical 100 nA Standby
• CMOS and TTL Compatible Inputs and Outputs
– I/O Pin-keeper Circuits
• Advanced Flash Technology
– Reprogrammable
– 100% Tested
• High-reliability CMOS Process
– 20 Year Data Retention
High-
performance
EE PLD
– 100 Erase/Write Cycles
– 2,000V ESD Protection
– 200 mA Latchup Immunity
• Commercial and Industrial Temperature Ranges
• Dual-in-line and Surface Mount Packages in Standard Pinouts
• Inputs are 5V Tolerant
ATF16LV8C
• Green Package Options (Pb/Halide-free/RoHS Compliant) Available
Description
The ATF16LV8C is a high-performance EECMOS programmable logic device that uti-
lizes Atmel’s proven electrically-erasable Flash memory technology. Speeds down to
10 ns and a 5 µA pin-controlled power-down mode option are offered. All speed
(continued)
Pin Configurations
TSSOP
All Pinouts Top View
I/CLK
I1
1
20
19
18
17
16
15
14
13
12
11
VCC
I/O
Pin Name Function
2
I2
3
I/O
CLK
I
Clock
PD/I3
I4
4
I/O
5
I/O
Logic Inputs
I5
6
I/O
I6
7
I/O
I/O
OE
VCC
Bi-directional Buffers
Output Enable
(+3V to 5.5V) Supply
I7
8
I/O
I8
9
I/O
GND
10
I9/OE
Programmable Power-
down Option
PD
DIP/SOIC
PLCC
I/CLK
1
2
3
4
5
6
7
8
9
20 VCC
19 I/O
18 I/O
17 I/O
16 I/O
15 I/O
14 I/O
13 I/O
12 I/O
I1
I2
PD/I3
I4
PD/I3
I4
4
5
6
7
8
18 I/O
17 I/O
16 I/O
15 I/O
14 I/O
I5
I6
I5
I7
I6
I8
I7
Rev. 0403H–06/06
GND 10
11 I9/OE
ranges are specified over the full 3.0V to 5.25V range for
industrial and commercial temperature ranges.
The ATF16LV8C can significantly reduce total system
power, thereby enhancing system reliability and reducing
power supply costs. When pin 4 is configured as the
power-down control pin, supply current drops to less than
5 µA whenever the pin is high. If the power-down feature
isn't required for a particular application, pin 4 may be used
as a logic input. Also, the pin keeper circuits eliminate the
need for internal pull-up resistors along with their attendant
power consumption.
The ATF16LV8C incorporates a superset of the generic
architectures, which allows direct replacement of the 16R8
family and most 20-pin combinatorial PLDs. Eight outputs
are each allocated eight product terms. Three different
modes of operation, configured automatically with soft-
ware, allow highly complex logic functions to be realized.
Block Diagram
Note:
1. Includes optional PD control pin.
Absolute Maximum Ratings*
Temperature Under Bias.................................. -40°C to +85°C
*NOTICE:
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
Storage Temperature..................................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground .........................................-2.0V to +7.0V(1)
Voltage on Input Pins
with Respect to Ground
During Programming.....................................-2.0V to +14.0V(1)
Note:
1. Minimum voltage is -0.6V DC, which may under-
shoot to -2.0V for pulses of less than 20 ns.
Maximum output pin voltage is Vcc + 0.75V DC,
which may overshoot to 7.0V for pulses of less
than 20 ns.
Programming Voltage with
Respect to Ground .......................................-2.0V to +14.0V(1)
DC and AC Operating Conditions
Commercial
0°C - 70°C
Operating Temperature (Ambient)
VCC Power Supply
3.0V to 5.5V
ATF16LV8C
2
ATF16LV8C
DC Characteristics
Symbol
Parameter
Condition(2)
Min
Typ
Max
-10
10
Units
µA
IIL
Input or I/O Low Leakage Current
Input or I/O High Leakage Current
0 ≤ VIN ≤ VIL(Max)
1.8 ≤ VIN ≤ VCC
IIH
µA
15 MHz, VCC = Max,
VIN = 0, VCC,
Outputs Open
55
60
Com.
Ind.
(1)
ICC1
Power Supply Current
mA
VCC = Max,
VIN = 0, VCC
(1)
IPD
Power Supply Current, Power-down Mode
Output Short Circuit Current
0.1
5
µA
VOUT = 0.5V;
IOS
-150
mA
VCC= 3V; TA = 25°C
VIL
VIH
Input Low Voltage
Input High Voltage
MIN < VCC < Max
-0.5
2.0
0.8
V
V
VCC + 1
VCC = Min; All Outputs
IOL = 8 mA
VOL
VOH
Output Low Voltage
Output High Voltage
0.5
V
V
VCC = Min
2.4
IOH = -4 mA
VCC = Min
VCC = Min
IOL
IOH
Note:
Output Low Current
Output High Current
8
mA
mA
-4
1. All ICC parameters measured with outputs open.
2. For DC characteristics, the test condition of VCC = Max corresponds to 3.6V.
AC Waveforms(1)
Note:
1. Timing measurement reference is 1.5V. Input AC driving levels are 0.0V and 3.0V, unless otherwise specified.
3
AC Characteristics
-10
-15
Symbol
Parameter
Min
Max
10
5
Min
Max
15
8
Units
ns
tPD
tCF
tCO
tS
Input or Feedback to Non-Registered Output
Clock to Feedback
Clock to Output
1
1
ns
2
7
7
2
12
0
10
ns
Input or Feedback Setup Time
Input Hold Time
ns
tH
0
ns
tP
Clock Period
12
6
16
8
ns
tW
Clock Width
ns
External Feedback 1/(tS+ tCO
)
71.4
83.3
83.3
10
45.5
50
MHz
MHz
MHz
ns
fMAX
Internal Feedback 1/(tS + tCF
)
No Feedback 1/(tP)
62.5
15
tEA
Input to Output Enable — Product Term
Input to Output Disable — Product Term
OE pin to Output Enable
3
2
3
2
tER
10
15
ns
tPZX
tPXZ
2
8
2
15
ns
OE pin to Output Disable
1.5
8
1.5
15
ns
Power-down AC Characteristics(1)(2)(3)
-10
-15
Symbol
tIVDH
Parameter
Min
10
0
Max
Min
15
0
Max
Units
ns
Valid Input before PD High
Valid OE before PD High
Valid Clock before PD High
Input Don't Care after PD High
OE Don't Care after PD High
Clock Don't Care after PD High
PD Low to Valid Input
tGVDH
tCVDH
tDHIX
ns
0
0
ns
10
10
10
10
25
25
30
15
15
15
15
30
30
35
ns
tDHGX
tDHCX
tDLIV
ns
ns
ns
tDLGV
tDLCV
tDLOV
PD Low to Valid OE
ns
PD Low to Valid Clock
ns
PD Low to Valid Output
ns
Notes: 1. Output data is latched and held.
2. High-Z outputs remain High-Z.
3. Clock and input transitions are ignored.
ATF16LV8C
4
ATF16LV8C
Input Test Waveforms and
Measurement Levels:
Output Test Loads:
Commercial
3.3V
R1 = 316
OUTPUT
PIN
CL = 35pF
tR, tF < 1.5ns (10% to 90%)
R2 = 348
Note:
Similar devices are tested with slightly different loads.
These load differences may affect output signals’ delay
and slew rate. Atmel devices are tested with sufficient
margins to meet compatible devices.
Pin Capacitance
(1)
(f = 1 MHz, T = 25°C)
Typ
5
Max
Units
pF
Conditions
VIN = 0V
CIN
8
8
COUT
6
pF
VOUT = 0V
Note:
1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested.
Power-up Reset
The ATF16LV8C’s registers are designed to reset during
power-up. At a point delayed slightly from VCC crossing
V
RST, all registers will be reset to the low state. As a result,
the registered output state will always be high on power-up.
This feature is critical for state machine initialization.
However, due to the asynchronous nature of reset and the
uncertainty of how VCC actually rises in the system, the
following conditions are required:
1. The VCC rise must be monotonic from below 0.7V.
2. The signals from which the clock is derived must
remain stable during TPR
.
3. After TPR, all input and feedback setup times must
be met before driving the clock term high.
Parameter
Description
Typ
Max
Units
Power-up
Reset Time
TPR
600
1,000
ns
Power-up
Reset
VRST
2.5
3.0
V
Voltage
5
OUTPUT SINK CURRENT
SUPPLY CURRENT
VS. INPUT FREQUENCY
(VCC = 3.3V, TA = 25°C)
VS. OUTPUT VOLTAGE (VCC = 5V, TA = 25°C)
60
50
40
30
20
10
0
40.0
39.5
39.0
IOL mA
38.5
38.0
37.5
37.0
ICC mA
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
10 20
30 40 50 60 70 80
90 100
OUTPUT VOLTAGE (V)
FREQUENCY (MHz)
NORMALIZED SUPPLY CURRENT
NORMALIZED SUPPLY CURRENT
VS. AMBIENT TEMPERATURE
(VCC = 3.3V, STANDBY)
VS. SUPPLY VOLTAGE
(TA = 25°C, STANDBY)
1.6
1.4
1.2
1.0
0.8
0.6
0
1.6
1.4
1.2
1.0
0.8
0.6
NORM
ICC mA
NORM
ICC mA
0.4
0.2
0
3.0
3.3
3.6
-5°
25°
75°
SUPPLY VOLTAGE (V)
AMBIENT TEMPERATURE (C)
OUTPUT SOURCE CURRENT
VS. SUPPLY VOLTAGE (VOH = 2.4V, TA = 25°C)
OUTPUT SINK CURRENT
VS. SUPPLY VOLTAGE (TA = 25°C, VOL = 0.45V)
0
-2
25.0
24.5
24.0
23.5
23.0
22.5
22.0
21.5
21.0
20.5
-4
-6
-8
IOH mA
IOL mA
-10
-12
-14
-16
3.0
3.45
3.15
3.3
3.6
3.0
3.15
3.3
3.45
3.6
SUPPLY VOLTAGE (V)
SUPPLY VOLTAGE (V)
ATF16LV8C
6
ATF16LV8C
NORMALIZED tCO
VS. AMBIENT TEMPERATURE (VCC = 3.3V)
OUTPUT SOURCE CURRENT
VS. OUTPUT VOLTAGE (VCC = 5V, TA = 25°C)
0
1.06
1.04
1.02
1.00
0.98
0.96
0.94
0.92
-5
-10
-15
-20
-25
-30
NORM
tCO
IOH mA
0.90
0.88
0.5
1.0
1.5
2.0
2.5
3.0
3.3
-5°
25°
75°
OUTPUT VOLTAGE (V)
AMBIENT TEMPERATURE (C)
NORMALIZED tPD
VS. SUPPLY VOLTAGE (TA = 25°C)
NORMALIZED tS
VS. AMBIENT TEMPERATURE (VCC = 3.3V)
1.2
1.0
0.8
0.6
0.4
1.06
1.04
1.02
1.00
0.98
0.96
0.94
0.92
NORM
tPD
NORM
tS
0.2
0
3.0
3.25
3.6
-5°
25°
75°
SUPPLY VOLTAGE (V)
AMBIENT TEMPERATURE (C)
NORMALIZED tPD
VS. AMBIENT TEMPERATURE (VCC = 3.3V)
NORMALIZED tH
VS. AMBIENT TEMPERATURE (VCC = 3.3V)
1.06
1.04
1.02
1.00
1.2
1.0
0.8
0.6
NORM
tPD
NORM
tH
0.98
0.96
0.94
0.92
0.90
0.4
0.2
0
-5°
25°
75°
-5°
25°
75°
AMBIENT TEMPERATURE (C)
AMBIENT TEMPERATURE (C)
7
NORMALIZED tCO
VS. SUPPLY VOLTAGE (TA = 25°C)
INPUT CLAMP CURRENT
VS. INPUT VOLTAGE (TA = 25°C, VCC = 3.3V)
1.2
1.0
0.8
0.6
0.4
0.2
0
0
-10
-20
-30
INPUT
CURRENT
mA
NORM
tCO
-40
-50
-60
-70
-80
-0.1 -0.2 -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 -0.9 -1.0
0
3.0
3.0
3.0
3.25
3.6
3.6
3.6
INPUT VOLTAGE (V)
SUPPLY VOLTAGE (V)
NORMALIZED tS
VS. SUPPLY VOLTAGE (TA = 25°C)
INPUT CURRENT
VS. INPUT VOLTAGE (TA = 25°C, VCC = 3.3V)
1.2
1.0
0.8
0.6
0.4
0.2
0
35
30
25
20
15
10
5
INPUT
CURRENT
mA
NORM
tS
0
-5
-10
-15
-20
0
0.5
1.0
1.5
2.0
2.5
3.0 3.3
3.25
INPUT VOLTAGE (V)
SUPPLY VOLTAGE (V)
NORMALIZED tH
VS. SUPPLY VOLTAGE (TA = 25°C)
1.2
1.0
0.8
NORM
tH
0.6
0.4
0.2
0
3.25
SUPPLY VOLTAGE (V)
ATF16LV8C
8
ATF16LV8C
Ordering Information
tPD
tS
tCO
(ns)
(ns)
(ns)
Ordering Code
Package
Operation Range
10
15
10
15
7
12
7
7
10
7
ATF16LV8C-10JC
ATF16LV8C-10PC
ATF16LV8C-10SC
ATF16LV8C-10XC
20J
Commercial
20P3
20S
20X
(0°C to 70°C)
ATF16LV8C-15JC
ATF16LV8C-15PC
ATF16LV8C-15SC
ATF16LV8C-15XC
20J
Commercial
20P3
20S
20X
(0°C to 70°C)
ATF16LV8C-10JI
ATF16LV8C-10PI
ATF16LV8C-10SI
ATF16LV8C-10XI
20J
Industrial
20P3
20S
20X
(-40°C to 85°C)
12
10
ATF16LV8C-15JI
ATF16LV8C-15PI
ATF16LV8C-15SI
ATF16LV8C-15XI
20J
Industrial
20P3
20S
20X
(-40°C to 85°C)
Green Package Options (Pb/Halide-free/RoHS Compliant)
tPD
tS
tCO
(ns)
(ns)
(ns)
Ordering Code
Package
Operation Range
10
7
7
ATF16LV8C-10JU
ATF16LV8C-10SU
ATF16LV8C-10XU
20J
20S
20X
Industrial
(-40°C to 85°C)
Using “C” Product for Industrial
To use commercial product for industrial temperature ranges, simply de-rate ICC by 15% on the “C” device. No speed
de-rating is necessary.
Package Type
20J
20P3
20S
20-lead, Plastic J-leaded Chip Carrier (PLCC)
20-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP)
20-lead, 0.300" Wide, Plastic Gull-wing Small Outline (SOIC)
20-lead, 4.4 mm Wide, Plastic Thin Shrink Small Outline (TSSOP)
20X
9
Packaging Information
20J – PLCC
PIN NO. 1
1.14(0.045) X 45˚
1.14(0.045) X 45˚
0.318(0.0125)
0.191(0.0075)
IDENTIFIER
e
E1
E
D2/E2
B1
B
A2
A1
D1
D
A
0.51(0.020)MAX
45˚ MAX (3X)
COMMON DIMENSIONS
(Unit of Measure = mm)
MIN
4.191
2.286
0.508
9.779
8.890
9.779
8.890
7.366
0.660
0.330
MAX
4.572
3.048
–
NOM
NOTE
SYMBOL
A
A1
A2
D
–
–
–
–
10.033
D1
E
–
9.042 Note 2
10.033
–
Notes:
1. This package conforms to JEDEC reference MS-018, Variation AA.
2. Dimensions D1 and E1 do not include mold protrusion.
Allowable protrusion is .010"(0.254 mm) per side. Dimension D1
and E1 include mold mismatch and are measured at the extreme
material condition at the upper or lower parting line.
E1
D2/E2
B
–
9.042 Note 2
8.382
–
–
–
0.813
3. Lead coplanarity is 0.004" (0.102 mm) maximum.
B1
e
0.533
1.270 TYP
10/04/01
DRAWING NO. REV.
20J
TITLE
2325 Orchard Parkway
San Jose, CA 95131
20J, 20-lead, Plastic J-leaded Chip Carrier (PLCC)
B
R
ATF16LV8C
10
ATF16LV8C
20P3 – PDIP
D
PIN
1
E1
A
SEATING PLANE
A1
L
B
B1
e
E
COMMON DIMENSIONS
(Unit of Measure = mm)
C
MIN
–
MAX
5.334
–
NOM
NOTE
SYMBOL
eC
A
–
–
–
–
–
–
–
–
–
–
–
eB
A1
D
0.381
24.892
7.620
6.096
0.356
1.270
2.921
0.203
–
26.924 Note 2
8.255
E
E1
B
7.112 Note 2
0.559
B1
L
1.551
Notes:
1. This package conforms to JEDEC reference MS-001, Variation AD.
2. Dimensions D and E1 do not include mold Flash or Protrusion.
Mold Flash or Protrusion shall not exceed 0.25 mm (0.010").
3.810
C
0.356
eB
eC
e
10.922
0.000
1.524
2.540 TYP
1/23/04
DRAWING NO. REV.
20P3
TITLE
2325 Orchard Parkway
San Jose, CA 95131
20P3, 20-lead (0.300"/7.62 mm Wide) Plastic Dual
Inline Package (PDIP)
D
R
11
20S – SOIC
Dimensions in Millimeters and (Inches).
Controlling dimension: Inches.
JEDEC Standard MS-013
0.51(0.020)
0.33(0.013)
10.65 (0.419)
10.00 (0.394)
7.60 (0.2992)
7.40 (0.2914)
PIN 1 ID
PIN 1
1.27 (0.050) BSC
13.00 (0.5118)
12.60 (0.4961)
2.65 (0.1043)
2.35 (0.0926)
0.30(0.0118)
0.10 (0.0040)
0.32 (0.0125)
0.23 (0.0091)
0º ~ 8º
1.27 (0.050)
0.40 (0.016)
10/23/03
TITLE
DRAWING NO. REV.
2325 Orchard Parkway
San Jose, CA 95131
20S, 20-lead, 0.300" Body, Plastic Gull Wing Small Outline (SOIC)
20S
B
R
ATF16LV8C
12
ATF16LV8C
20X – TSSOP
Dimensions in Millimeters and (Inches).
Controlling dimension: Millimeters.
JEDEC Standard MO-153 AC
INDEX MARK
PIN
1
6.50 (0.256)
6.25 (0.246)
4.50 (0.177)
4.30 (0.169)
6.60 (.260)
6.40 (.252)
1.20 (0.047) MAX
0.65 (.0256) BSC
0.15 (0.006)
0.05 (0.002)
SEATING
PLANE
0.30 (0.012)
0.19 (0.007)
0.20 (0.008)
0.09 (0.004)
0º ~ 8º
0.75 (0.030)
0.45 (0.018)
10/23/03
TITLE
DRAWING NO. REV.
2325 Orchard Parkway
San Jose, CA 95131
20X, (Formerly 20T), 20-lead, 4.4 mm Body Width,
Plastic Thin Shrink Small Outline Package (TSSOP)
20X
C
R
13
Revision History
Revision Level – Revision Date History
H – June 2006
Added Green package options.
ATF16LV8C
14
Atmel Corporation
Atmel Operations
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Memory
RF/Automotive
Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
Tel: (49) 71-31-67-0
Fax: (49) 71-31-67-2340
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
Microcontrollers
Regional Headquarters
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Fax: 1(719) 540-1759
Biometrics/Imaging/Hi-Rel MPU/
High-Speed Converters/RF Datacom
Avenue de Rochepleine
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
Tel: (33) 2-40-18-18-18
Fax: (33) 2-40-18-19-60
BP 123
38521 Saint-Egreve Cedex, France
Tel: (33) 4-76-58-30-00
Fax: (33) 4-76-58-34-80
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
ASIC/ASSP/Smart Cards
Zone Industrielle
13106 Rousset Cedex, France
Tel: (33) 4-42-53-60-00
Fax: (33) 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Fax: 1(719) 540-1759
Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
Tel: (44) 1355-803-000
Fax: (44) 1355-242-743
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI-
TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN-
TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT
OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.
© 2006 Atmel Corporation. All rights reserved. Atmel®, logo and combinations thereof, Everywhere You Are® and others are registered trade-
marks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
0403H–06/06
相关型号:
©2020 ICPDF网 联系我们和版权申明